Merge tag 'v4.13-rc1' into fixes

The fixes branch is based off a random pre-rc1 commit, because we had
some fixes that needed to go in before rc1 was released.

However we now need to fix some code that went in after that point, but
before rc1, so merge rc1 to get that code into fixes so we can fix it!

20 files changed, 1908 insertions, 231 deletions

diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c
index 0a8a1c45af87..a1497c516d85 100644
--- a/tools/perf/builtin-kmem.c
+++ b/tools/perf/builtin-kmem.c
@@ -643,7 +643,7 @@ static const struct {
 	{ "__GFP_FS",			"F" },
 	{ "__GFP_COLD",			"CO" },
 	{ "__GFP_NOWARN",		"NWR" },
-	{ "__GFP_REPEAT",		"R" },
+	{ "__GFP_RETRY_MAYFAIL",	"R" },
 	{ "__GFP_NOFAIL",		"NF" },
 	{ "__GFP_NORETRY",		"NR" },
 	{ "__GFP_COMP",			"C" },
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 2ca51a8a588c..153c3a181a4c 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -37,6 +37,5 @@ CLANG ?= clang
 
 %.o: %.c
 	$(CLANG) -I. -I./include/uapi -I../../../include/uapi \
-		-I../../../../samples/bpf/ \
 		-Wno-compare-distinct-pointer-types \
 		-O2 -target bpf -c $< -o $@
diff --git a/tools/testing/selftests/bpf/bpf_endian.h b/tools/testing/selftests/bpf/bpf_endian.h
index 487cbfb89beb..74af266aa512 100644
--- a/tools/testing/selftests/bpf/bpf_endian.h
+++ b/tools/testing/selftests/bpf/bpf_endian.h
@@ -23,11 +23,19 @@
 # define __bpf_htons(x)			__builtin_bswap16(x)
 # define __bpf_constant_ntohs(x)	___constant_swab16(x)
 # define __bpf_constant_htons(x)	___constant_swab16(x)
+# define __bpf_ntohl(x)			__builtin_bswap32(x)
+# define __bpf_htonl(x)			__builtin_bswap32(x)
+# define __bpf_constant_ntohl(x)	___constant_swab32(x)
+# define __bpf_constant_htonl(x)	___constant_swab32(x)
 #elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
 # define __bpf_ntohs(x)			(x)
 # define __bpf_htons(x)			(x)
 # define __bpf_constant_ntohs(x)	(x)
 # define __bpf_constant_htons(x)	(x)
+# define __bpf_ntohl(x)			(x)
+# define __bpf_htonl(x)			(x)
+# define __bpf_constant_ntohl(x)	(x)
+# define __bpf_constant_htonl(x)	(x)
 #else
 # error "Fix your compiler's __BYTE_ORDER__?!"
 #endif
@@ -38,5 +46,11 @@
 #define bpf_ntohs(x)				\
 	(__builtin_constant_p(x) ?		\
 	 __bpf_constant_ntohs(x) : __bpf_ntohs(x))
+#define bpf_htonl(x)				\
+	(__builtin_constant_p(x) ?		\
+	 __bpf_constant_htonl(x) : __bpf_htonl(x))
+#define bpf_ntohl(x)				\
+	(__builtin_constant_p(x) ?		\
+	 __bpf_constant_ntohl(x) : __bpf_ntohl(x))
 
 #endif /* __BPF_ENDIAN__ */
diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h
new file mode 100644
index 000000000000..d50ac342dc92
--- /dev/null
+++ b/tools/testing/selftests/bpf/bpf_helpers.h
@@ -0,0 +1,198 @@
+#ifndef __BPF_HELPERS_H
+#define __BPF_HELPERS_H
+
+/* helper macro to place programs, maps, license in
+ * different sections in elf_bpf file. Section names
+ * are interpreted by elf_bpf loader
+ */
+#define SEC(NAME) __attribute__((section(NAME), used))
+
+/* helper functions called from eBPF programs written in C */
+static void *(*bpf_map_lookup_elem)(void *map, void *key) =
+	(void *) BPF_FUNC_map_lookup_elem;
+static int (*bpf_map_update_elem)(void *map, void *key, void *value,
+				  unsigned long long flags) =
+	(void *) BPF_FUNC_map_update_elem;
+static int (*bpf_map_delete_elem)(void *map, void *key) =
+	(void *) BPF_FUNC_map_delete_elem;
+static int (*bpf_probe_read)(void *dst, int size, void *unsafe_ptr) =
+	(void *) BPF_FUNC_probe_read;
+static unsigned long long (*bpf_ktime_get_ns)(void) =
+	(void *) BPF_FUNC_ktime_get_ns;
+static int (*bpf_trace_printk)(const char *fmt, int fmt_size, ...) =
+	(void *) BPF_FUNC_trace_printk;
+static void (*bpf_tail_call)(void *ctx, void *map, int index) =
+	(void *) BPF_FUNC_tail_call;
+static unsigned long long (*bpf_get_smp_processor_id)(void) =
+	(void *) BPF_FUNC_get_smp_processor_id;
+static unsigned long long (*bpf_get_current_pid_tgid)(void) =
+	(void *) BPF_FUNC_get_current_pid_tgid;
+static unsigned long long (*bpf_get_current_uid_gid)(void) =
+	(void *) BPF_FUNC_get_current_uid_gid;
+static int (*bpf_get_current_comm)(void *buf, int buf_size) =
+	(void *) BPF_FUNC_get_current_comm;
+static unsigned long long (*bpf_perf_event_read)(void *map,
+						 unsigned long long flags) =
+	(void *) BPF_FUNC_perf_event_read;
+static int (*bpf_clone_redirect)(void *ctx, int ifindex, int flags) =
+	(void *) BPF_FUNC_clone_redirect;
+static int (*bpf_redirect)(int ifindex, int flags) =
+	(void *) BPF_FUNC_redirect;
+static int (*bpf_perf_event_output)(void *ctx, void *map,
+				    unsigned long long flags, void *data,
+				    int size) =
+	(void *) BPF_FUNC_perf_event_output;
+static int (*bpf_get_stackid)(void *ctx, void *map, int flags) =
+	(void *) BPF_FUNC_get_stackid;
+static int (*bpf_probe_write_user)(void *dst, void *src, int size) =
+	(void *) BPF_FUNC_probe_write_user;
+static int (*bpf_current_task_under_cgroup)(void *map, int index) =
+	(void *) BPF_FUNC_current_task_under_cgroup;
+static int (*bpf_skb_get_tunnel_key)(void *ctx, void *key, int size, int flags) =
+	(void *) BPF_FUNC_skb_get_tunnel_key;
+static int (*bpf_skb_set_tunnel_key)(void *ctx, void *key, int size, int flags) =
+	(void *) BPF_FUNC_skb_set_tunnel_key;
+static int (*bpf_skb_get_tunnel_opt)(void *ctx, void *md, int size) =
+	(void *) BPF_FUNC_skb_get_tunnel_opt;
+static int (*bpf_skb_set_tunnel_opt)(void *ctx, void *md, int size) =
+	(void *) BPF_FUNC_skb_set_tunnel_opt;
+static unsigned long long (*bpf_get_prandom_u32)(void) =
+	(void *) BPF_FUNC_get_prandom_u32;
+static int (*bpf_xdp_adjust_head)(void *ctx, int offset) =
+	(void *) BPF_FUNC_xdp_adjust_head;
+static int (*bpf_setsockopt)(void *ctx, int level, int optname, void *optval,
+			     int optlen) =
+	(void *) BPF_FUNC_setsockopt;
+
+/* llvm builtin functions that eBPF C program may use to
+ * emit BPF_LD_ABS and BPF_LD_IND instructions
+ */
+struct sk_buff;
+unsigned long long load_byte(void *skb,
+			     unsigned long long off) asm("llvm.bpf.load.byte");
+unsigned long long load_half(void *skb,
+			     unsigned long long off) asm("llvm.bpf.load.half");
+unsigned long long load_word(void *skb,
+			     unsigned long long off) asm("llvm.bpf.load.word");
+
+/* a helper structure used by eBPF C program
+ * to describe map attributes to elf_bpf loader
+ */
+struct bpf_map_def {
+	unsigned int type;
+	unsigned int key_size;
+	unsigned int value_size;
+	unsigned int max_entries;
+	unsigned int map_flags;
+	unsigned int inner_map_idx;
+};
+
+static int (*bpf_skb_load_bytes)(void *ctx, int off, void *to, int len) =
+	(void *) BPF_FUNC_skb_load_bytes;
+static int (*bpf_skb_store_bytes)(void *ctx, int off, void *from, int len, int flags) =
+	(void *) BPF_FUNC_skb_store_bytes;
+static int (*bpf_l3_csum_replace)(void *ctx, int off, int from, int to, int flags) =
+	(void *) BPF_FUNC_l3_csum_replace;
+static int (*bpf_l4_csum_replace)(void *ctx, int off, int from, int to, int flags) =
+	(void *) BPF_FUNC_l4_csum_replace;
+static int (*bpf_skb_under_cgroup)(void *ctx, void *map, int index) =
+	(void *) BPF_FUNC_skb_under_cgroup;
+static int (*bpf_skb_change_head)(void *, int len, int flags) =
+	(void *) BPF_FUNC_skb_change_head;
+
+#if defined(__x86_64__)
+
+#define PT_REGS_PARM1(x) ((x)->di)
+#define PT_REGS_PARM2(x) ((x)->si)
+#define PT_REGS_PARM3(x) ((x)->dx)
+#define PT_REGS_PARM4(x) ((x)->cx)
+#define PT_REGS_PARM5(x) ((x)->r8)
+#define PT_REGS_RET(x) ((x)->sp)
+#define PT_REGS_FP(x) ((x)->bp)
+#define PT_REGS_RC(x) ((x)->ax)
+#define PT_REGS_SP(x) ((x)->sp)
+#define PT_REGS_IP(x) ((x)->ip)
+
+#elif defined(__s390x__)
+
+#define PT_REGS_PARM1(x) ((x)->gprs[2])
+#define PT_REGS_PARM2(x) ((x)->gprs[3])
+#define PT_REGS_PARM3(x) ((x)->gprs[4])
+#define PT_REGS_PARM4(x) ((x)->gprs[5])
+#define PT_REGS_PARM5(x) ((x)->gprs[6])
+#define PT_REGS_RET(x) ((x)->gprs[14])
+#define PT_REGS_FP(x) ((x)->gprs[11]) /* Works only with CONFIG_FRAME_POINTER */
+#define PT_REGS_RC(x) ((x)->gprs[2])
+#define PT_REGS_SP(x) ((x)->gprs[15])
+#define PT_REGS_IP(x) ((x)->psw.addr)
+
+#elif defined(__aarch64__)
+
+#define PT_REGS_PARM1(x) ((x)->regs[0])
+#define PT_REGS_PARM2(x) ((x)->regs[1])
+#define PT_REGS_PARM3(x) ((x)->regs[2])
+#define PT_REGS_PARM4(x) ((x)->regs[3])
+#define PT_REGS_PARM5(x) ((x)->regs[4])
+#define PT_REGS_RET(x) ((x)->regs[30])
+#define PT_REGS_FP(x) ((x)->regs[29]) /* Works only with CONFIG_FRAME_POINTER */
+#define PT_REGS_RC(x) ((x)->regs[0])
+#define PT_REGS_SP(x) ((x)->sp)
+#define PT_REGS_IP(x) ((x)->pc)
+
+#elif defined(__mips__)
+
+#define PT_REGS_PARM1(x) ((x)->regs[4])
+#define PT_REGS_PARM2(x) ((x)->regs[5])
+#define PT_REGS_PARM3(x) ((x)->regs[6])
+#define PT_REGS_PARM4(x) ((x)->regs[7])
+#define PT_REGS_PARM5(x) ((x)->regs[8])
+#define PT_REGS_RET(x) ((x)->regs[31])
+#define PT_REGS_FP(x) ((x)->regs[30]) /* Works only with CONFIG_FRAME_POINTER */
+#define PT_REGS_RC(x) ((x)->regs[1])
+#define PT_REGS_SP(x) ((x)->regs[29])
+#define PT_REGS_IP(x) ((x)->cp0_epc)
+
+#elif defined(__powerpc__)
+
+#define PT_REGS_PARM1(x) ((x)->gpr[3])
+#define PT_REGS_PARM2(x) ((x)->gpr[4])
+#define PT_REGS_PARM3(x) ((x)->gpr[5])
+#define PT_REGS_PARM4(x) ((x)->gpr[6])
+#define PT_REGS_PARM5(x) ((x)->gpr[7])
+#define PT_REGS_RC(x) ((x)->gpr[3])
+#define PT_REGS_SP(x) ((x)->sp)
+#define PT_REGS_IP(x) ((x)->nip)
+
+#elif defined(__sparc__)
+
+#define PT_REGS_PARM1(x) ((x)->u_regs[UREG_I0])
+#define PT_REGS_PARM2(x) ((x)->u_regs[UREG_I1])
+#define PT_REGS_PARM3(x) ((x)->u_regs[UREG_I2])
+#define PT_REGS_PARM4(x) ((x)->u_regs[UREG_I3])
+#define PT_REGS_PARM5(x) ((x)->u_regs[UREG_I4])
+#define PT_REGS_RET(x) ((x)->u_regs[UREG_I7])
+#define PT_REGS_RC(x) ((x)->u_regs[UREG_I0])
+#define PT_REGS_SP(x) ((x)->u_regs[UREG_FP])
+#if defined(__arch64__)
+#define PT_REGS_IP(x) ((x)->tpc)
+#else
+#define PT_REGS_IP(x) ((x)->pc)
+#endif
+
+#endif
+
+#ifdef __powerpc__
+#define BPF_KPROBE_READ_RET_IP(ip, ctx)		({ (ip) = (ctx)->link; })
+#define BPF_KRETPROBE_READ_RET_IP		BPF_KPROBE_READ_RET_IP
+#elif defined(__sparc__)
+#define BPF_KPROBE_READ_RET_IP(ip, ctx)		({ (ip) = PT_REGS_RET(ctx); })
+#define BPF_KRETPROBE_READ_RET_IP		BPF_KPROBE_READ_RET_IP
+#else
+#define BPF_KPROBE_READ_RET_IP(ip, ctx)		({				\
+		bpf_probe_read(&(ip), sizeof(ip), (void *)PT_REGS_RET(ctx)); })
+#define BPF_KRETPROBE_READ_RET_IP(ip, ctx)	({				\
+		bpf_probe_read(&(ip), sizeof(ip),				\
+				(void *)(PT_REGS_FP(ctx) + sizeof(ip))); })
+#endif
+
+#endif
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_eventname.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_eventname.tc
new file mode 100644
index 000000000000..b9302cc82c12
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_eventname.tc
@@ -0,0 +1,36 @@
+#!/bin/sh
+# description: Kprobe event auto/manual naming
+
+[ -f kprobe_events ] || exit_unsupported # this is configurable
+
+disable_events
+echo > kprobe_events
+
+:;: "Add an event on function without name" ;:
+
+FUNC=`grep " [tT] .*vfs_read$" /proc/kallsyms | tail -n 1 | cut -f 3 -d " "`
+[ "x" != "x$FUNC" ] || exit_unresolved
+echo "p $FUNC" > kprobe_events
+PROBE_NAME=`echo $FUNC | tr ".:" "_"`
+test -d events/kprobes/p_${PROBE_NAME}_0 || exit_failure
+
+:;: "Add an event on function with new name" ;:
+
+echo "p:event1 $FUNC" > kprobe_events
+test -d events/kprobes/event1 || exit_failure
+
+:;: "Add an event on function with new name and group" ;:
+
+echo "p:kprobes2/event2 $FUNC" > kprobe_events
+test -d events/kprobes2/event2 || exit_failure
+
+:;: "Add an event on dot function without name" ;:
+
+FUNC=`grep -m 10 " [tT] .*\.isra\..*$" /proc/kallsyms | tail -n 1 | cut -f 3 -d " "`
+[ "x" != "x$FUNC" ] || exit_unresolved
+echo "p $FUNC" > kprobe_events
+EVENT=`grep $FUNC kprobe_events | cut -f 1 -d " " | cut -f 2 -d:`
+[ "x" != "x$EVENT" ] || exit_failure
+test -d events/$EVENT || exit_failure
+
+echo > kprobe_events
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc
new file mode 100644
index 000000000000..6d634e4b7680
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc
@@ -0,0 +1,28 @@
+#!/bin/sh
+# description: Kprobe dynamic event - probing module
+
+[ -f kprobe_events ] || exit_unsupported # this is configurable
+
+disable_events
+echo > kprobe_events
+
+:;: "Add an event on a module function without specifying event name" ;:
+
+MOD=`lsmod | head -n 2 | tail -n 1 | cut -f1 -d" "`
+FUNC=`grep -m 1 ".* t .*\\[$MOD\\]" /proc/kallsyms | xargs | cut -f3 -d" "`
+[ "x" != "x$MOD" -a "y" != "y$FUNC" ] || exit_unresolved
+echo "p $MOD:$FUNC" > kprobe_events
+PROBE_NAME=`echo $MOD:$FUNC | tr ".:" "_"`
+test -d events/kprobes/p_${PROBE_NAME}_0 || exit_failure
+
+:;: "Add an event on a module function with new event name" ;:
+
+echo "p:event1 $MOD:$FUNC" > kprobe_events
+test -d events/kprobes/event1 || exit_failure
+
+:;: "Add an event on a module function with new event and group name" ;:
+
+echo "p:kprobes1/event1 $MOD:$FUNC" > kprobe_events
+test -d events/kprobes1/event1 || exit_failure
+
+echo > kprobe_events
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc b/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
index f4d1ff785d67..2a1cb9908746 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
@@ -2,10 +2,10 @@
 # description: Register/unregister many kprobe events
 
 # ftrace fentry skip size depends on the machine architecture.
-# Currently HAVE_KPROBES_ON_FTRACE defined on x86 and powerpc
+# Currently HAVE_KPROBES_ON_FTRACE defined on x86 and powerpc64le
 case `uname -m` in
   x86_64|i[3456]86) OFFS=5;;
-  ppc*) OFFS=4;;
+  ppc64le) OFFS=8;;
   *) OFFS=0;;
 esac
 
diff --git a/tools/testing/selftests/kmod/Makefile b/tools/testing/selftests/kmod/Makefile
new file mode 100644
index 000000000000..fa2ccc5fb3de
--- /dev/null
+++ b/tools/testing/selftests/kmod/Makefile
@@ -0,0 +1,11 @@
+# Makefile for kmod loading selftests
+
+# No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
+all:
+
+TEST_PROGS := kmod.sh
+
+include ../lib.mk
+
+# Nothing to clean up.
+clean:
diff --git a/tools/testing/selftests/kmod/config b/tools/testing/selftests/kmod/config
new file mode 100644
index 000000000000..259f4fd6b5e2
--- /dev/null
+++ b/tools/testing/selftests/kmod/config
@@ -0,0 +1,7 @@
+CONFIG_TEST_KMOD=m
+CONFIG_TEST_LKM=m
+CONFIG_XFS_FS=m
+
+# For the module parameter force_init_test is used
+CONFIG_TUN=m
+CONFIG_BTRFS_FS=m
diff --git a/tools/testing/selftests/kmod/kmod.sh b/tools/testing/selftests/kmod/kmod.sh
new file mode 100644
index 000000000000..8cecae9a8bca
--- /dev/null
+++ b/tools/testing/selftests/kmod/kmod.sh
@@ -0,0 +1,615 @@
+#!/bin/bash
+#
+# Copyright (C) 2017 Luis R. Rodriguez <mcgrof@kernel.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2 of the License, or at your option any
+# later version; or, when distributed separately from the Linux kernel or
+# when incorporated into other software packages, subject to the following
+# license:
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of copyleft-next (version 0.3.1 or later) as published
+# at http://copyleft-next.org/.
+
+# This is a stress test script for kmod, the kernel module loader. It uses
+# test_kmod which exposes a series of knobs for the API for us so we can
+# tweak each test in userspace rather than in kernelspace.
+#
+# The way kmod works is it uses the kernel's usermode helper API to eventually
+# call /sbin/modprobe. It has a limit of the number of concurrent calls
+# possible. The kernel interface to load modules is request_module(), however
+# mount uses get_fs_type(). Both behave slightly differently, but the
+# differences are important enough to test each call separately. For this
+# reason test_kmod starts by providing tests for both calls.
+#
+# The test driver test_kmod assumes a series of defaults which you can
+# override by exporting to your environment prior running this script.
+# For instance this script assumes you do not have xfs loaded upon boot.
+# If this is false, export DEFAULT_KMOD_FS="ext4" prior to running this
+# script if the filesyste module you don't have loaded upon bootup
+# is ext4 instead. Refer to allow_user_defaults() for a list of user
+# override variables possible.
+#
+# You'll want at least 4 GiB of RAM to expect to run these tests
+# without running out of memory on them. For other requirements refer
+# to test_reqs()
+
+set -e
+
+TEST_NAME="kmod"
+TEST_DRIVER="test_${TEST_NAME}"
+TEST_DIR=$(dirname $0)
+
+# This represents
+#
+# TEST_ID:TEST_COUNT:ENABLED
+#
+# TEST_ID: is the test id number
+# TEST_COUNT: number of times we should run the test
+# ENABLED: 1 if enabled, 0 otherwise
+#
+# Once these are enabled please leave them as-is. Write your own test,
+# we have tons of space.
+ALL_TESTS="0001:3:1"
+ALL_TESTS="$ALL_TESTS 0002:3:1"
+ALL_TESTS="$ALL_TESTS 0003:1:1"
+ALL_TESTS="$ALL_TESTS 0004:1:1"
+ALL_TESTS="$ALL_TESTS 0005:10:1"
+ALL_TESTS="$ALL_TESTS 0006:10:1"
+ALL_TESTS="$ALL_TESTS 0007:5:1"
+ALL_TESTS="$ALL_TESTS 0008:150:1"
+ALL_TESTS="$ALL_TESTS 0009:150:1"
+
+test_modprobe()
+{
+       if [ ! -d $DIR ]; then
+               echo "$0: $DIR not present" >&2
+               echo "You must have the following enabled in your kernel:" >&2
+               cat $TEST_DIR/config >&2
+               exit 1
+       fi
+}
+
+function allow_user_defaults()
+{
+	if [ -z $DEFAULT_KMOD_DRIVER ]; then
+		DEFAULT_KMOD_DRIVER="test_module"
+	fi
+
+	if [ -z $DEFAULT_KMOD_FS ]; then
+		DEFAULT_KMOD_FS="xfs"
+	fi
+
+	if [ -z $PROC_DIR ]; then
+		PROC_DIR="/proc/sys/kernel/"
+	fi
+
+	if [ -z $MODPROBE_LIMIT ]; then
+		MODPROBE_LIMIT=50
+	fi
+
+	if [ -z $DIR ]; then
+		DIR="/sys/devices/virtual/misc/${TEST_DRIVER}0/"
+	fi
+
+	if [ -z $DEFAULT_NUM_TESTS ]; then
+		DEFAULT_NUM_TESTS=150
+	fi
+
+	MODPROBE_LIMIT_FILE="${PROC_DIR}/kmod-limit"
+}
+
+test_reqs()
+{
+	if ! which modprobe 2> /dev/null > /dev/null; then
+		echo "$0: You need modprobe installed" >&2
+		exit 1
+	fi
+
+	if ! which kmod 2> /dev/null > /dev/null; then
+		echo "$0: You need kmod installed" >&2
+		exit 1
+	fi
+
+	# kmod 19 has a bad bug where it returns 0 when modprobe
+	# gets called *even* if the module was not loaded due to
+	# some bad heuristics. For details see:
+	#
+	# A work around is possible in-kernel but its rather
+	# complex.
+	KMOD_VERSION=$(kmod --version | awk '{print $3}')
+	if [[ $KMOD_VERSION  -le 19 ]]; then
+		echo "$0: You need at least kmod 20" >&2
+		echo "kmod <= 19 is buggy, for details see:" >&2
+		echo "http://git.kernel.org/cgit/utils/kernel/kmod/kmod.git/commit/libkmod/libkmod-module.c?id=fd44a98ae2eb5eb32161088954ab21e58e19dfc4" >&2
+		exit 1
+	fi
+
+	uid=$(id -u)
+	if [ $uid -ne 0 ]; then
+		echo $msg must be run as root >&2
+		exit 0
+	fi
+}
+
+function load_req_mod()
+{
+	trap "test_modprobe" EXIT
+
+	if [ ! -d $DIR ]; then
+		# Alanis: "Oh isn't it ironic?"
+		modprobe $TEST_DRIVER
+	fi
+}
+
+test_finish()
+{
+	echo "Test completed"
+}
+
+errno_name_to_val()
+{
+	case "$1" in
+	# kmod calls modprobe and upon of a module not found
+	# modprobe returns just 1... However in the kernel we
+	# *sometimes* see 256...
+	MODULE_NOT_FOUND)
+		echo 256;;
+	SUCCESS)
+		echo 0;;
+	-EPERM)
+		echo -1;;
+	-ENOENT)
+		echo -2;;
+	-EINVAL)
+		echo -22;;
+	-ERR_ANY)
+		echo -123456;;
+	*)
+		echo invalid;;
+	esac
+}
+
+errno_val_to_name()
+	case "$1" in
+	256)
+		echo MODULE_NOT_FOUND;;
+	0)
+		echo SUCCESS;;
+	-1)
+		echo -EPERM;;
+	-2)
+		echo -ENOENT;;
+	-22)
+		echo -EINVAL;;
+	-123456)
+		echo -ERR_ANY;;
+	*)
+		echo invalid;;
+	esac
+
+config_set_test_case_driver()
+{
+	if ! echo -n 1 >$DIR/config_test_case; then
+		echo "$0: Unable to set to test case to driver" >&2
+		exit 1
+	fi
+}
+
+config_set_test_case_fs()
+{
+	if ! echo -n 2 >$DIR/config_test_case; then
+		echo "$0: Unable to set to test case to fs" >&2
+		exit 1
+	fi
+}
+
+config_num_threads()
+{
+	if ! echo -n $1 >$DIR/config_num_threads; then
+		echo "$0: Unable to set to number of threads" >&2
+		exit 1
+	fi
+}
+
+config_get_modprobe_limit()
+{
+	if [[ -f ${MODPROBE_LIMIT_FILE} ]] ; then
+		MODPROBE_LIMIT=$(cat $MODPROBE_LIMIT_FILE)
+	fi
+	echo $MODPROBE_LIMIT
+}
+
+config_num_thread_limit_extra()
+{
+	MODPROBE_LIMIT=$(config_get_modprobe_limit)
+	let EXTRA_LIMIT=$MODPROBE_LIMIT+$1
+	config_num_threads $EXTRA_LIMIT
+}
+
+# For special characters use printf directly,
+# refer to kmod_test_0001
+config_set_driver()
+{
+	if ! echo -n $1 >$DIR/config_test_driver; then
+		echo "$0: Unable to set driver" >&2
+		exit 1
+	fi
+}
+
+config_set_fs()
+{
+	if ! echo -n $1 >$DIR/config_test_fs; then
+		echo "$0: Unable to set driver" >&2
+		exit 1
+	fi
+}
+
+config_get_driver()
+{
+	cat $DIR/config_test_driver
+}
+
+config_get_test_result()
+{
+	cat $DIR/test_result
+}
+
+config_reset()
+{
+	if ! echo -n "1" >"$DIR"/reset; then
+		echo "$0: reset shuld have worked" >&2
+		exit 1
+	fi
+}
+
+config_show_config()
+{
+	echo "----------------------------------------------------"
+	cat "$DIR"/config
+	echo "----------------------------------------------------"
+}
+
+config_trigger()
+{
+	if ! echo -n "1" >"$DIR"/trigger_config 2>/dev/null; then
+		echo "$1: FAIL - loading should have worked"
+		config_show_config
+		exit 1
+	fi
+	echo "$1: OK! - loading kmod test"
+}
+
+config_trigger_want_fail()
+{
+	if echo "1" > $DIR/trigger_config 2>/dev/null; then
+		echo "$1: FAIL - test case was expected to fail"
+		config_show_config
+		exit 1
+	fi
+	echo "$1: OK! - kmod test case failed as expected"
+}
+
+config_expect_result()
+{
+	RC=$(config_get_test_result)
+	RC_NAME=$(errno_val_to_name $RC)
+
+	ERRNO_NAME=$2
+	ERRNO=$(errno_name_to_val $ERRNO_NAME)
+
+	if [[ $ERRNO_NAME = "-ERR_ANY" ]]; then
+		if [[ $RC -ge 0 ]]; then
+			echo "$1: FAIL, test expects $ERRNO_NAME - got $RC_NAME ($RC)" >&2
+			config_show_config
+			exit 1
+		fi
+	elif [[ $RC != $ERRNO ]]; then
+		echo "$1: FAIL, test expects $ERRNO_NAME ($ERRNO) - got $RC_NAME ($RC)" >&2
+		config_show_config
+		exit 1
+	fi
+	echo "$1: OK! - Return value: $RC ($RC_NAME), expected $ERRNO_NAME"
+}
+
+kmod_defaults_driver()
+{
+	config_reset
+	modprobe -r $DEFAULT_KMOD_DRIVER
+	config_set_driver $DEFAULT_KMOD_DRIVER
+}
+
+kmod_defaults_fs()
+{
+	config_reset
+	modprobe -r $DEFAULT_KMOD_FS
+	config_set_fs $DEFAULT_KMOD_FS
+	config_set_test_case_fs
+}
+
+kmod_test_0001_driver()
+{
+	NAME='\000'
+
+	kmod_defaults_driver
+	config_num_threads 1
+	printf '\000' >"$DIR"/config_test_driver
+	config_trigger ${FUNCNAME[0]}
+	config_expect_result ${FUNCNAME[0]} MODULE_NOT_FOUND
+}
+
+kmod_test_0001_fs()
+{
+	NAME='\000'
+
+	kmod_defaults_fs
+	config_num_threads 1
+	printf '\000' >"$DIR"/config_test_fs
+	config_trigger ${FUNCNAME[0]}
+	config_expect_result ${FUNCNAME[0]} -EINVAL
+}
+
+kmod_test_0001()
+{
+	kmod_test_0001_driver
+	kmod_test_0001_fs
+}
+
+kmod_test_0002_driver()
+{
+	NAME="nope-$DEFAULT_KMOD_DRIVER"
+
+	kmod_defaults_driver
+	config_set_driver $NAME
+	config_num_threads 1
+	config_trigger ${FUNCNAME[0]}
+	config_expect_result ${FUNCNAME[0]} MODULE_NOT_FOUND
+}
+
+kmod_test_0002_fs()
+{
+	NAME="nope-$DEFAULT_KMOD_FS"
+
+	kmod_defaults_fs
+	config_set_fs $NAME
+	config_trigger ${FUNCNAME[0]}
+	config_expect_result ${FUNCNAME[0]} -EINVAL
+}
+
+kmod_test_0002()
+{
+	kmod_test_0002_driver
+	kmod_test_0002_fs
+}
+
+kmod_test_0003()
+{
+	kmod_defaults_fs
+	config_num_threads 1
+	config_trigger ${FUNCNAME[0]}
+	config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+kmod_test_0004()
+{
+	kmod_defaults_fs
+	config_num_threads 2
+	config_trigger ${FUNCNAME[0]}
+	config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+kmod_test_0005()
+{
+	kmod_defaults_driver
+	config_trigger ${FUNCNAME[0]}
+	config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+kmod_test_0006()
+{
+	kmod_defaults_fs
+	config_trigger ${FUNCNAME[0]}
+	config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+kmod_test_0007()
+{
+	kmod_test_0005
+	kmod_test_0006
+}
+
+kmod_test_0008()
+{
+	kmod_defaults_driver
+	MODPROBE_LIMIT=$(config_get_modprobe_limit)
+	let EXTRA=$MODPROBE_LIMIT/6
+	config_num_thread_limit_extra $EXTRA
+	config_trigger ${FUNCNAME[0]}
+	config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+kmod_test_0009()
+{
+	kmod_defaults_fs
+	MODPROBE_LIMIT=$(config_get_modprobe_limit)
+	let EXTRA=$MODPROBE_LIMIT/4
+	config_num_thread_limit_extra $EXTRA
+	config_trigger ${FUNCNAME[0]}
+	config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+list_tests()
+{
+	echo "Test ID list:"
+	echo
+	echo "TEST_ID x NUM_TEST"
+	echo "TEST_ID:   Test ID"
+	echo "NUM_TESTS: Number of recommended times to run the test"
+	echo
+	echo "0001 x $(get_test_count 0001) - Simple test - 1 thread  for empty string"
+	echo "0002 x $(get_test_count 0002) - Simple test - 1 thread  for modules/filesystems that do not exist"
+	echo "0003 x $(get_test_count 0003) - Simple test - 1 thread  for get_fs_type() only"
+	echo "0004 x $(get_test_count 0004) - Simple test - 2 threads for get_fs_type() only"
+	echo "0005 x $(get_test_count 0005) - multithreaded tests with default setup - request_module() only"
+	echo "0006 x $(get_test_count 0006) - multithreaded tests with default setup - get_fs_type() only"
+	echo "0007 x $(get_test_count 0007) - multithreaded tests with default setup test request_module() and get_fs_type()"
+	echo "0008 x $(get_test_count 0008) - multithreaded - push kmod_concurrent over max_modprobes for request_module()"
+	echo "0009 x $(get_test_count 0009) - multithreaded - push kmod_concurrent over max_modprobes for get_fs_type()"
+}
+
+usage()
+{
+	NUM_TESTS=$(grep -o ' ' <<<"$ALL_TESTS" | grep -c .)
+	let NUM_TESTS=$NUM_TESTS+1
+	MAX_TEST=$(printf "%04d\n" $NUM_TESTS)
+	echo "Usage: $0 [ -t <4-number-digit> ] | [ -w <4-number-digit> ] |"
+	echo "		 [ -s <4-number-digit> ] | [ -c <4-number-digit> <test- count>"
+	echo "           [ all ] [ -h | --help ] [ -l ]"
+	echo ""
+	echo "Valid tests: 0001-$MAX_TEST"
+	echo ""
+	echo "    all     Runs all tests (default)"
+	echo "    -t      Run test ID the number amount of times is recommended"
+	echo "    -w      Watch test ID run until it runs into an error"
+	echo "    -c      Run test ID once"
+	echo "    -s      Run test ID x test-count number of times"
+	echo "    -l      List all test ID list"
+	echo " -h|--help  Help"
+	echo
+	echo "If an error every occurs execution will immediately terminate."
+	echo "If you are adding a new test try using -w <test-ID> first to"
+	echo "make sure the test passes a series of tests."
+	echo
+	echo Example uses:
+	echo
+	echo "${TEST_NAME}.sh		-- executes all tests"
+	echo "${TEST_NAME}.sh -t 0008	-- Executes test ID 0008 number of times is recomended"
+	echo "${TEST_NAME}.sh -w 0008	-- Watch test ID 0008 run until an error occurs"
+	echo "${TEST_NAME}.sh -s 0008	-- Run test ID 0008 once"
+	echo "${TEST_NAME}.sh -c 0008 3	-- Run test ID 0008 three times"
+	echo
+	list_tests
+	exit 1
+}
+
+function test_num()
+{
+	re='^[0-9]+$'
+	if ! [[ $1 =~ $re ]]; then
+		usage
+	fi
+}
+
+function get_test_count()
+{
+	test_num $1
+	TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
+	LAST_TWO=${TEST_DATA#*:*}
+	echo ${LAST_TWO%:*}
+}
+
+function get_test_enabled()
+{
+	test_num $1
+	TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
+	echo ${TEST_DATA#*:*:}
+}
+
+function run_all_tests()
+{
+	for i in $ALL_TESTS ; do
+		TEST_ID=${i%:*:*}
+		ENABLED=$(get_test_enabled $TEST_ID)
+		TEST_COUNT=$(get_test_count $TEST_ID)
+		if [[ $ENABLED -eq "1" ]]; then
+			test_case $TEST_ID $TEST_COUNT
+		fi
+	done
+}
+
+function watch_log()
+{
+	if [ $# -ne 3 ]; then
+		clear
+	fi
+	date
+	echo "Running test: $2 - run #$1"
+}
+
+function watch_case()
+{
+	i=0
+	while [ 1 ]; do
+
+		if [ $# -eq 1 ]; then
+			test_num $1
+			watch_log $i ${TEST_NAME}_test_$1
+			${TEST_NAME}_test_$1
+		else
+			watch_log $i all
+			run_all_tests
+		fi
+		let i=$i+1
+	done
+}
+
+function test_case()
+{
+	NUM_TESTS=$DEFAULT_NUM_TESTS
+	if [ $# -eq 2 ]; then
+		NUM_TESTS=$2
+	fi
+
+	i=0
+	while [ $i -lt $NUM_TESTS ]; do
+		test_num $1
+		watch_log $i ${TEST_NAME}_test_$1 noclear
+		RUN_TEST=${TEST_NAME}_test_$1
+		$RUN_TEST
+		let i=$i+1
+	done
+}
+
+function parse_args()
+{
+	if [ $# -eq 0 ]; then
+		run_all_tests
+	else
+		if [[ "$1" = "all" ]]; then
+			run_all_tests
+		elif [[ "$1" = "-w" ]]; then
+			shift
+			watch_case $@
+		elif [[ "$1" = "-t" ]]; then
+			shift
+			test_num $1
+			test_case $1 $(get_test_count $1)
+		elif [[ "$1" = "-c" ]]; then
+			shift
+			test_num $1
+			test_num $2
+			test_case $1 $2
+		elif [[ "$1" = "-s" ]]; then
+			shift
+			test_case $1 1
+		elif [[ "$1" = "-l" ]]; then
+			list_tests
+		elif [[ "$1" = "-h" || "$1" = "--help" ]]; then
+			usage
+		else
+			usage
+		fi
+	fi
+}
+
+test_reqs
+allow_user_defaults
+load_req_mod
+
+trap "test_finish" EXIT
+
+parse_args $@
+
+exit 0
diff --git a/tools/testing/selftests/ntb/ntb_test.sh b/tools/testing/selftests/ntb/ntb_test.sh
index 13f5198ba0ee..1c12b5855e4f 100755
--- a/tools/testing/selftests/ntb/ntb_test.sh
+++ b/tools/testing/selftests/ntb/ntb_test.sh
@@ -18,6 +18,7 @@ LIST_DEVS=FALSE
 
 DEBUGFS=${DEBUGFS-/sys/kernel/debug}
 
+DB_BITMASK=0x7FFF
 PERF_RUN_ORDER=32
 MAX_MW_SIZE=0
 RUN_DMA_TESTS=
@@ -38,6 +39,7 @@ function show_help()
 	echo "be highly recommended."
 	echo
 	echo "Options:"
+	echo "  -b BITMASK      doorbell clear bitmask for ntb_tool"
 	echo "  -C              don't cleanup ntb modules on exit"
 	echo "  -d              run dma tests"
 	echo "  -h              show this help message"
@@ -52,8 +54,9 @@ function show_help()
 function parse_args()
 {
 	OPTIND=0
-	while getopts "Cdhlm:r:p:w:" opt; do
+	while getopts "b:Cdhlm:r:p:w:" opt; do
 		case "$opt" in
+		b)  DB_BITMASK=${OPTARG} ;;
 		C)  DONT_CLEANUP=1 ;;
 		d)  RUN_DMA_TESTS=1 ;;
 		h)  show_help; exit 0 ;;
@@ -85,6 +88,10 @@ set -e
 function _modprobe()
 {
         modprobe "$@"
+
+	if [[ "$REMOTE_HOST" != "" ]]; then
+		ssh "$REMOTE_HOST" modprobe "$@"
+	fi
 }
 
 function split_remote()
@@ -154,7 +161,7 @@ function doorbell_test()
 
 	echo "Running db tests on: $(basename $LOC) / $(basename $REM)"
 
-	write_file "c 0xFFFFFFFF" "$REM/db"
+	write_file "c $DB_BITMASK" "$REM/db"
 
 	for ((i=1; i <= 8; i++)); do
 		let DB=$(read_file "$REM/db") || true
diff --git a/tools/testing/selftests/sysctl/Makefile b/tools/testing/selftests/sysctl/Makefile
index b3c33e071f10..95c320b354e8 100644
--- a/tools/testing/selftests/sysctl/Makefile
+++ b/tools/testing/selftests/sysctl/Makefile
@@ -4,8 +4,7 @@
 # No binaries, but make sure arg-less "make" doesn't trigger "run_tests".
 all:
 
-TEST_PROGS := run_numerictests run_stringtests
-TEST_FILES := common_tests
+TEST_PROGS := sysctl.sh
 
 include ../lib.mk
 
diff --git a/tools/testing/selftests/sysctl/common_tests b/tools/testing/selftests/sysctl/common_tests
deleted file mode 100644
index b6862322962f..000000000000
--- a/tools/testing/selftests/sysctl/common_tests
+++ /dev/null
@@ -1,131 +0,0 @@
-#!/bin/sh
-
-TEST_FILE=$(mktemp)
-
-echo "== Testing sysctl behavior against ${TARGET} =="
-
-set_orig()
-{
-	echo "${ORIG}" > "${TARGET}"
-}
-
-set_test()
-{
-	echo "${TEST_STR}" > "${TARGET}"
-}
-
-verify()
-{
-	local seen
-	seen=$(cat "$1")
-	if [ "${seen}" != "${TEST_STR}" ]; then
-		return 1
-	fi
-	return 0
-}
-
-exit_test()
-{
-	if [ ! -z ${old_strict} ]; then
-		echo ${old_strict} > ${WRITES_STRICT}
-	fi
-	exit $rc
-}
-
-trap 'set_orig; rm -f "${TEST_FILE}"' EXIT
-
-rc=0
-
-echo -n "Writing test file ... "
-echo "${TEST_STR}" > "${TEST_FILE}"
-if ! verify "${TEST_FILE}"; then
-	echo "FAIL" >&2
-	exit 1
-else
-	echo "ok"
-fi
-
-echo -n "Checking sysctl is not set to test value ... "
-if verify "${TARGET}"; then
-	echo "FAIL" >&2
-	exit 1
-else
-	echo "ok"
-fi
-
-echo -n "Writing sysctl from shell ... "
-set_test
-if ! verify "${TARGET}"; then
-	echo "FAIL" >&2
-	exit 1
-else
-	echo "ok"
-fi
-
-echo -n "Resetting sysctl to original value ... "
-set_orig
-if verify "${TARGET}"; then
-	echo "FAIL" >&2
-	exit 1
-else
-	echo "ok"
-fi
-
-echo -n "Checking write strict setting ... "
-WRITES_STRICT="${SYSCTL}/kernel/sysctl_writes_strict"
-if [ ! -e ${WRITES_STRICT} ]; then
-	echo "FAIL, but skip in case of old kernel" >&2
-else
-	old_strict=$(cat ${WRITES_STRICT})
-	if [ "$old_strict" = "1" ]; then
-		echo "ok"
-	else
-		echo "FAIL, strict value is 0 but force to 1 to continue" >&2
-		echo "1" > ${WRITES_STRICT}
-	fi
-fi
-
-# Now that we've validated the sanity of "set_test" and "set_orig",
-# we can use those functions to set starting states before running
-# specific behavioral tests.
-
-echo -n "Writing entire sysctl in single write ... "
-set_orig
-dd if="${TEST_FILE}" of="${TARGET}" bs=4096 2>/dev/null
-if ! verify "${TARGET}"; then
-	echo "FAIL" >&2
-	rc=1
-else
-	echo "ok"
-fi
-
-echo -n "Writing middle of sysctl after synchronized seek ... "
-set_test
-dd if="${TEST_FILE}" of="${TARGET}" bs=1 seek=1 skip=1 2>/dev/null
-if ! verify "${TARGET}"; then
-	echo "FAIL" >&2
-	rc=1
-else
-	echo "ok"
-fi
-
-echo -n "Writing beyond end of sysctl ... "
-set_orig
-dd if="${TEST_FILE}" of="${TARGET}" bs=20 seek=2 2>/dev/null
-if verify "${TARGET}"; then
-        echo "FAIL" >&2
-        rc=1
-else
-        echo "ok"
-fi
-
-echo -n "Writing sysctl with multiple long writes ... "
-set_orig
-(perl -e 'print "A" x 50;'; echo "${TEST_STR}") | \
-	dd of="${TARGET}" bs=50 2>/dev/null
-if verify "${TARGET}"; then
-	echo "FAIL" >&2
-	rc=1
-else
-	echo "ok"
-fi
diff --git a/tools/testing/selftests/sysctl/config b/tools/testing/selftests/sysctl/config
new file mode 100644
index 000000000000..6ca14800d755
--- /dev/null
+++ b/tools/testing/selftests/sysctl/config
@@ -0,0 +1 @@
+CONFIG_TEST_SYSCTL=y
diff --git a/tools/testing/selftests/sysctl/run_numerictests b/tools/testing/selftests/sysctl/run_numerictests
deleted file mode 100755
index e6e76c93d948..000000000000
--- a/tools/testing/selftests/sysctl/run_numerictests
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-SYSCTL="/proc/sys"
-TARGET="${SYSCTL}/vm/swappiness"
-ORIG=$(cat "${TARGET}")
-TEST_STR=$(( $ORIG + 1 ))
-
-. ./common_tests
-
-exit_test
diff --git a/tools/testing/selftests/sysctl/run_stringtests b/tools/testing/selftests/sysctl/run_stringtests
deleted file mode 100755
index 857ec667fb02..000000000000
--- a/tools/testing/selftests/sysctl/run_stringtests
+++ /dev/null
@@ -1,77 +0,0 @@
-#!/bin/sh
-
-SYSCTL="/proc/sys"
-TARGET="${SYSCTL}/kernel/domainname"
-ORIG=$(cat "${TARGET}")
-TEST_STR="Testing sysctl"
-
-. ./common_tests
-
-# Only string sysctls support seeking/appending.
-MAXLEN=65
-
-echo -n "Writing entire sysctl in short writes ... "
-set_orig
-dd if="${TEST_FILE}" of="${TARGET}" bs=1 2>/dev/null
-if ! verify "${TARGET}"; then
-	echo "FAIL" >&2
-	rc=1
-else
-	echo "ok"
-fi
-
-echo -n "Writing middle of sysctl after unsynchronized seek ... "
-set_test
-dd if="${TEST_FILE}" of="${TARGET}" bs=1 seek=1 2>/dev/null
-if verify "${TARGET}"; then
-	echo "FAIL" >&2
-	rc=1
-else
-	echo "ok"
-fi
-
-echo -n "Checking sysctl maxlen is at least $MAXLEN ... "
-set_orig
-perl -e 'print "A" x ('"${MAXLEN}"'-2), "B";' | \
-	dd of="${TARGET}" bs="${MAXLEN}" 2>/dev/null
-if ! grep -q B "${TARGET}"; then
-	echo "FAIL" >&2
-	rc=1
-else
-	echo "ok"
-fi
-
-echo -n "Checking sysctl keeps original string on overflow append ... "
-set_orig
-perl -e 'print "A" x ('"${MAXLEN}"'-1), "B";' | \
-	dd of="${TARGET}" bs=$(( MAXLEN - 1 )) 2>/dev/null
-if grep -q B "${TARGET}"; then
-	echo "FAIL" >&2
-	rc=1
-else
-	echo "ok"
-fi
-
-echo -n "Checking sysctl stays NULL terminated on write ... "
-set_orig
-perl -e 'print "A" x ('"${MAXLEN}"'-1), "B";' | \
-	dd of="${TARGET}" bs="${MAXLEN}" 2>/dev/null
-if grep -q B "${TARGET}"; then
-	echo "FAIL" >&2
-	rc=1
-else
-	echo "ok"
-fi
-
-echo -n "Checking sysctl stays NULL terminated on overwrite ... "
-set_orig
-perl -e 'print "A" x ('"${MAXLEN}"'-1), "BB";' | \
-	dd of="${TARGET}" bs=$(( $MAXLEN + 1 )) 2>/dev/null
-if grep -q B "${TARGET}"; then
-	echo "FAIL" >&2
-	rc=1
-else
-	echo "ok"
-fi
-
-exit_test
diff --git a/tools/testing/selftests/sysctl/sysctl.sh b/tools/testing/selftests/sysctl/sysctl.sh
new file mode 100644
index 000000000000..ec232c3cfcaa
--- /dev/null
+++ b/tools/testing/selftests/sysctl/sysctl.sh
@@ -0,0 +1,774 @@
+#!/bin/bash
+# Copyright (C) 2017 Luis R. Rodriguez <mcgrof@kernel.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2 of the License, or at your option any
+# later version; or, when distributed separately from the Linux kernel or
+# when incorporated into other software packages, subject to the following
+# license:
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of copyleft-next (version 0.3.1 or later) as published
+# at http://copyleft-next.org/.
+
+# This performs a series tests against the proc sysctl interface.
+
+TEST_NAME="sysctl"
+TEST_DRIVER="test_${TEST_NAME}"
+TEST_DIR=$(dirname $0)
+TEST_FILE=$(mktemp)
+
+# This represents
+#
+# TEST_ID:TEST_COUNT:ENABLED
+#
+# TEST_ID: is the test id number
+# TEST_COUNT: number of times we should run the test
+# ENABLED: 1 if enabled, 0 otherwise
+#
+# Once these are enabled please leave them as-is. Write your own test,
+# we have tons of space.
+ALL_TESTS="0001:1:1"
+ALL_TESTS="$ALL_TESTS 0002:1:1"
+ALL_TESTS="$ALL_TESTS 0003:1:1"
+ALL_TESTS="$ALL_TESTS 0004:1:1"
+ALL_TESTS="$ALL_TESTS 0005:3:1"
+
+test_modprobe()
+{
+       if [ ! -d $DIR ]; then
+               echo "$0: $DIR not present" >&2
+               echo "You must have the following enabled in your kernel:" >&2
+               cat $TEST_DIR/config >&2
+               exit 1
+       fi
+}
+
+function allow_user_defaults()
+{
+	if [ -z $DIR ]; then
+		DIR="/sys/module/test_sysctl/"
+	fi
+	if [ -z $DEFAULT_NUM_TESTS ]; then
+		DEFAULT_NUM_TESTS=50
+	fi
+	if [ -z $SYSCTL ]; then
+		SYSCTL="/proc/sys/debug/test_sysctl"
+	fi
+	if [ -z $PROD_SYSCTL ]; then
+		PROD_SYSCTL="/proc/sys"
+	fi
+	if [ -z $WRITES_STRICT ]; then
+		WRITES_STRICT="${PROD_SYSCTL}/kernel/sysctl_writes_strict"
+	fi
+}
+
+function check_production_sysctl_writes_strict()
+{
+	echo -n "Checking production write strict setting ... "
+	if [ ! -e ${WRITES_STRICT} ]; then
+		echo "FAIL, but skip in case of old kernel" >&2
+	else
+		old_strict=$(cat ${WRITES_STRICT})
+		if [ "$old_strict" = "1" ]; then
+			echo "ok"
+		else
+			echo "FAIL, strict value is 0 but force to 1 to continue" >&2
+			echo "1" > ${WRITES_STRICT}
+		fi
+	fi
+
+	if [ -z $PAGE_SIZE ]; then
+		PAGE_SIZE=$(getconf PAGESIZE)
+	fi
+	if [ -z $MAX_DIGITS ]; then
+		MAX_DIGITS=$(($PAGE_SIZE/8))
+	fi
+	if [ -z $INT_MAX ]; then
+		INT_MAX=$(getconf INT_MAX)
+	fi
+	if [ -z $UINT_MAX ]; then
+		UINT_MAX=$(getconf UINT_MAX)
+	fi
+}
+
+test_reqs()
+{
+	uid=$(id -u)
+	if [ $uid -ne 0 ]; then
+		echo $msg must be run as root >&2
+		exit 0
+	fi
+
+	if ! which perl 2> /dev/null > /dev/null; then
+		echo "$0: You need perl installed"
+		exit 1
+	fi
+	if ! which getconf 2> /dev/null > /dev/null; then
+		echo "$0: You need getconf installed"
+		exit 1
+	fi
+	if ! which diff 2> /dev/null > /dev/null; then
+		echo "$0: You need diff installed"
+		exit 1
+	fi
+}
+
+function load_req_mod()
+{
+	trap "test_modprobe" EXIT
+
+	if [ ! -d $DIR ]; then
+		modprobe $TEST_DRIVER
+		if [ $? -ne 0 ]; then
+			exit
+		fi
+	fi
+}
+
+reset_vals()
+{
+	VAL=""
+	TRIGGER=$(basename ${TARGET})
+	case "$TRIGGER" in
+		int_0001)
+			VAL="60"
+			;;
+		int_0002)
+			VAL="1"
+			;;
+		uint_0001)
+			VAL="314"
+			;;
+		string_0001)
+			VAL="(none)"
+			;;
+		*)
+			;;
+	esac
+	echo -n $VAL > $TARGET
+}
+
+set_orig()
+{
+	if [ ! -z $TARGET ]; then
+		echo "${ORIG}" > "${TARGET}"
+	fi
+}
+
+set_test()
+{
+	echo "${TEST_STR}" > "${TARGET}"
+}
+
+verify()
+{
+	local seen
+	seen=$(cat "$1")
+	if [ "${seen}" != "${TEST_STR}" ]; then
+		return 1
+	fi
+	return 0
+}
+
+verify_diff_w()
+{
+	echo "$TEST_STR" | diff -q -w -u - $1
+	return $?
+}
+
+test_rc()
+{
+	if [[ $rc != 0 ]]; then
+		echo "Failed test, return value: $rc" >&2
+		exit $rc
+	fi
+}
+
+test_finish()
+{
+	set_orig
+	rm -f "${TEST_FILE}"
+
+	if [ ! -z ${old_strict} ]; then
+		echo ${old_strict} > ${WRITES_STRICT}
+	fi
+	exit $rc
+}
+
+run_numerictests()
+{
+	echo "== Testing sysctl behavior against ${TARGET} =="
+
+	rc=0
+
+	echo -n "Writing test file ... "
+	echo "${TEST_STR}" > "${TEST_FILE}"
+	if ! verify "${TEST_FILE}"; then
+		echo "FAIL" >&2
+		exit 1
+	else
+		echo "ok"
+	fi
+
+	echo -n "Checking sysctl is not set to test value ... "
+	if verify "${TARGET}"; then
+		echo "FAIL" >&2
+		exit 1
+	else
+		echo "ok"
+	fi
+
+	echo -n "Writing sysctl from shell ... "
+	set_test
+	if ! verify "${TARGET}"; then
+		echo "FAIL" >&2
+		exit 1
+	else
+		echo "ok"
+	fi
+
+	echo -n "Resetting sysctl to original value ... "
+	set_orig
+	if verify "${TARGET}"; then
+		echo "FAIL" >&2
+		exit 1
+	else
+		echo "ok"
+	fi
+
+	# Now that we've validated the sanity of "set_test" and "set_orig",
+	# we can use those functions to set starting states before running
+	# specific behavioral tests.
+
+	echo -n "Writing entire sysctl in single write ... "
+	set_orig
+	dd if="${TEST_FILE}" of="${TARGET}" bs=4096 2>/dev/null
+	if ! verify "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+
+	echo -n "Writing middle of sysctl after synchronized seek ... "
+	set_test
+	dd if="${TEST_FILE}" of="${TARGET}" bs=1 seek=1 skip=1 2>/dev/null
+	if ! verify "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+
+	echo -n "Writing beyond end of sysctl ... "
+	set_orig
+	dd if="${TEST_FILE}" of="${TARGET}" bs=20 seek=2 2>/dev/null
+	if verify "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+
+	echo -n "Writing sysctl with multiple long writes ... "
+	set_orig
+	(perl -e 'print "A" x 50;'; echo "${TEST_STR}") | \
+		dd of="${TARGET}" bs=50 2>/dev/null
+	if verify "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+	test_rc
+}
+
+# Your test must accept digits 3 and 4 to use this
+run_limit_digit()
+{
+	echo -n "Checking ignoring spaces up to PAGE_SIZE works on write ..."
+	reset_vals
+
+	LIMIT=$((MAX_DIGITS -1))
+	TEST_STR="3"
+	(perl -e 'print " " x '$LIMIT';'; echo "${TEST_STR}") | \
+		dd of="${TARGET}" 2>/dev/null
+
+	if ! verify "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+	test_rc
+
+	echo -n "Checking passing PAGE_SIZE of spaces fails on write ..."
+	reset_vals
+
+	LIMIT=$((MAX_DIGITS))
+	TEST_STR="4"
+	(perl -e 'print " " x '$LIMIT';'; echo "${TEST_STR}") | \
+		dd of="${TARGET}" 2>/dev/null
+
+	if verify "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+	test_rc
+}
+
+# You are using an int
+run_limit_digit_int()
+{
+	echo -n "Testing INT_MAX works ..."
+	reset_vals
+	TEST_STR="$INT_MAX"
+	echo -n $TEST_STR > $TARGET
+
+	if ! verify "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+	test_rc
+
+	echo -n "Testing INT_MAX + 1 will fail as expected..."
+	reset_vals
+	let TEST_STR=$INT_MAX+1
+	echo -n $TEST_STR > $TARGET 2> /dev/null
+
+	if verify "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+	test_rc
+
+	echo -n "Testing negative values will work as expected..."
+	reset_vals
+	TEST_STR="-3"
+	echo -n $TEST_STR > $TARGET 2> /dev/null
+	if ! verify "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+	test_rc
+}
+
+# You used an int array
+run_limit_digit_int_array()
+{
+	echo -n "Testing array works as expected ... "
+	TEST_STR="4 3 2 1"
+	echo -n $TEST_STR > $TARGET
+
+	if ! verify_diff_w "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+	test_rc
+
+	echo -n "Testing skipping trailing array elements works ... "
+	# Do not reset_vals, carry on the values from the last test.
+	# If we only echo in two digits the last two are left intact
+	TEST_STR="100 101"
+	echo -n $TEST_STR > $TARGET
+	# After we echo in, to help diff we need to set on TEST_STR what
+	# we expect the result to be.
+	TEST_STR="100 101 2 1"
+
+	if ! verify_diff_w "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+	test_rc
+
+	echo -n "Testing PAGE_SIZE limit on array works ... "
+	# Do not reset_vals, carry on the values from the last test.
+	# Even if you use an int array, you are still restricted to
+	# MAX_DIGITS, this is a known limitation. Test limit works.
+	LIMIT=$((MAX_DIGITS -1))
+	TEST_STR="9"
+	(perl -e 'print " " x '$LIMIT';'; echo "${TEST_STR}") | \
+		dd of="${TARGET}" 2>/dev/null
+
+	TEST_STR="9 101 2 1"
+	if ! verify_diff_w "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+	test_rc
+
+	echo -n "Testing exceeding PAGE_SIZE limit fails as expected ... "
+	# Do not reset_vals, carry on the values from the last test.
+	# Now go over limit.
+	LIMIT=$((MAX_DIGITS))
+	TEST_STR="7"
+	(perl -e 'print " " x '$LIMIT';'; echo "${TEST_STR}") | \
+		dd of="${TARGET}" 2>/dev/null
+
+	TEST_STR="7 101 2 1"
+	if verify_diff_w "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+	test_rc
+}
+
+# You are using an unsigned int
+run_limit_digit_uint()
+{
+	echo -n "Testing UINT_MAX works ..."
+	reset_vals
+	TEST_STR="$UINT_MAX"
+	echo -n $TEST_STR > $TARGET
+
+	if ! verify "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+	test_rc
+
+	echo -n "Testing UINT_MAX + 1 will fail as expected..."
+	reset_vals
+	TEST_STR=$(($UINT_MAX+1))
+	echo -n $TEST_STR > $TARGET 2> /dev/null
+
+	if verify "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+	test_rc
+
+	echo -n "Testing negative values will not work as expected ..."
+	reset_vals
+	TEST_STR="-3"
+	echo -n $TEST_STR > $TARGET 2> /dev/null
+
+	if verify "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+	test_rc
+}
+
+run_stringtests()
+{
+	echo -n "Writing entire sysctl in short writes ... "
+	set_orig
+	dd if="${TEST_FILE}" of="${TARGET}" bs=1 2>/dev/null
+	if ! verify "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+
+	echo -n "Writing middle of sysctl after unsynchronized seek ... "
+	set_test
+	dd if="${TEST_FILE}" of="${TARGET}" bs=1 seek=1 2>/dev/null
+	if verify "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+
+	echo -n "Checking sysctl maxlen is at least $MAXLEN ... "
+	set_orig
+	perl -e 'print "A" x ('"${MAXLEN}"'-2), "B";' | \
+		dd of="${TARGET}" bs="${MAXLEN}" 2>/dev/null
+	if ! grep -q B "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+
+	echo -n "Checking sysctl keeps original string on overflow append ... "
+	set_orig
+	perl -e 'print "A" x ('"${MAXLEN}"'-1), "B";' | \
+		dd of="${TARGET}" bs=$(( MAXLEN - 1 )) 2>/dev/null
+	if grep -q B "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+
+	echo -n "Checking sysctl stays NULL terminated on write ... "
+	set_orig
+	perl -e 'print "A" x ('"${MAXLEN}"'-1), "B";' | \
+		dd of="${TARGET}" bs="${MAXLEN}" 2>/dev/null
+	if grep -q B "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+
+	echo -n "Checking sysctl stays NULL terminated on overwrite ... "
+	set_orig
+	perl -e 'print "A" x ('"${MAXLEN}"'-1), "BB";' | \
+		dd of="${TARGET}" bs=$(( $MAXLEN + 1 )) 2>/dev/null
+	if grep -q B "${TARGET}"; then
+		echo "FAIL" >&2
+		rc=1
+	else
+		echo "ok"
+	fi
+
+	test_rc
+}
+
+sysctl_test_0001()
+{
+	TARGET="${SYSCTL}/int_0001"
+	reset_vals
+	ORIG=$(cat "${TARGET}")
+	TEST_STR=$(( $ORIG + 1 ))
+
+	run_numerictests
+	run_limit_digit
+}
+
+sysctl_test_0002()
+{
+	TARGET="${SYSCTL}/string_0001"
+	reset_vals
+	ORIG=$(cat "${TARGET}")
+	TEST_STR="Testing sysctl"
+	# Only string sysctls support seeking/appending.
+	MAXLEN=65
+
+	run_numerictests
+	run_stringtests
+}
+
+sysctl_test_0003()
+{
+	TARGET="${SYSCTL}/int_0002"
+	reset_vals
+	ORIG=$(cat "${TARGET}")
+	TEST_STR=$(( $ORIG + 1 ))
+
+	run_numerictests
+	run_limit_digit
+	run_limit_digit_int
+}
+
+sysctl_test_0004()
+{
+	TARGET="${SYSCTL}/uint_0001"
+	reset_vals
+	ORIG=$(cat "${TARGET}")
+	TEST_STR=$(( $ORIG + 1 ))
+
+	run_numerictests
+	run_limit_digit
+	run_limit_digit_uint
+}
+
+sysctl_test_0005()
+{
+	TARGET="${SYSCTL}/int_0003"
+	reset_vals
+	ORIG=$(cat "${TARGET}")
+
+	run_limit_digit_int_array
+}
+
+list_tests()
+{
+	echo "Test ID list:"
+	echo
+	echo "TEST_ID x NUM_TEST"
+	echo "TEST_ID:   Test ID"
+	echo "NUM_TESTS: Number of recommended times to run the test"
+	echo
+	echo "0001 x $(get_test_count 0001) - tests proc_dointvec_minmax()"
+	echo "0002 x $(get_test_count 0002) - tests proc_dostring()"
+	echo "0003 x $(get_test_count 0003) - tests proc_dointvec()"
+	echo "0004 x $(get_test_count 0004) - tests proc_douintvec()"
+	echo "0005 x $(get_test_count 0005) - tests proc_douintvec() array"
+}
+
+test_reqs
+
+usage()
+{
+	NUM_TESTS=$(grep -o ' ' <<<"$ALL_TESTS" | grep -c .)
+	let NUM_TESTS=$NUM_TESTS+1
+	MAX_TEST=$(printf "%04d\n" $NUM_TESTS)
+	echo "Usage: $0 [ -t <4-number-digit> ] | [ -w <4-number-digit> ] |"
+	echo "		 [ -s <4-number-digit> ] | [ -c <4-number-digit> <test- count>"
+	echo "           [ all ] [ -h | --help ] [ -l ]"
+	echo ""
+	echo "Valid tests: 0001-$MAX_TEST"
+	echo ""
+	echo "    all     Runs all tests (default)"
+	echo "    -t      Run test ID the number amount of times is recommended"
+	echo "    -w      Watch test ID run until it runs into an error"
+	echo "    -c      Run test ID once"
+	echo "    -s      Run test ID x test-count number of times"
+	echo "    -l      List all test ID list"
+	echo " -h|--help  Help"
+	echo
+	echo "If an error every occurs execution will immediately terminate."
+	echo "If you are adding a new test try using -w <test-ID> first to"
+	echo "make sure the test passes a series of tests."
+	echo
+	echo Example uses:
+	echo
+	echo "$TEST_NAME.sh            -- executes all tests"
+	echo "$TEST_NAME.sh -t 0002    -- Executes test ID 0002 number of times is recomended"
+	echo "$TEST_NAME.sh -w 0002    -- Watch test ID 0002 run until an error occurs"
+	echo "$TEST_NAME.sh -s 0002    -- Run test ID 0002 once"
+	echo "$TEST_NAME.sh -c 0002 3  -- Run test ID 0002 three times"
+	echo
+	list_tests
+	exit 1
+}
+
+function test_num()
+{
+	re='^[0-9]+$'
+	if ! [[ $1 =~ $re ]]; then
+		usage
+	fi
+}
+
+function get_test_count()
+{
+	test_num $1
+	TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
+	LAST_TWO=${TEST_DATA#*:*}
+	echo ${LAST_TWO%:*}
+}
+
+function get_test_enabled()
+{
+	test_num $1
+	TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
+	echo ${TEST_DATA#*:*:}
+}
+
+function run_all_tests()
+{
+	for i in $ALL_TESTS ; do
+		TEST_ID=${i%:*:*}
+		ENABLED=$(get_test_enabled $TEST_ID)
+		TEST_COUNT=$(get_test_count $TEST_ID)
+		if [[ $ENABLED -eq "1" ]]; then
+			test_case $TEST_ID $TEST_COUNT
+		fi
+	done
+}
+
+function watch_log()
+{
+	if [ $# -ne 3 ]; then
+		clear
+	fi
+	date
+	echo "Running test: $2 - run #$1"
+}
+
+function watch_case()
+{
+	i=0
+	while [ 1 ]; do
+
+		if [ $# -eq 1 ]; then
+			test_num $1
+			watch_log $i ${TEST_NAME}_test_$1
+			${TEST_NAME}_test_$1
+		else
+			watch_log $i all
+			run_all_tests
+		fi
+		let i=$i+1
+	done
+}
+
+function test_case()
+{
+	NUM_TESTS=$DEFAULT_NUM_TESTS
+	if [ $# -eq 2 ]; then
+		NUM_TESTS=$2
+	fi
+
+	i=0
+	while [ $i -lt $NUM_TESTS ]; do
+		test_num $1
+		watch_log $i ${TEST_NAME}_test_$1 noclear
+		RUN_TEST=${TEST_NAME}_test_$1
+		$RUN_TEST
+		let i=$i+1
+	done
+}
+
+function parse_args()
+{
+	if [ $# -eq 0 ]; then
+		run_all_tests
+	else
+		if [[ "$1" = "all" ]]; then
+			run_all_tests
+		elif [[ "$1" = "-w" ]]; then
+			shift
+			watch_case $@
+		elif [[ "$1" = "-t" ]]; then
+			shift
+			test_num $1
+			test_case $1 $(get_test_count $1)
+		elif [[ "$1" = "-c" ]]; then
+			shift
+			test_num $1
+			test_num $2
+			test_case $1 $2
+		elif [[ "$1" = "-s" ]]; then
+			shift
+			test_case $1 1
+		elif [[ "$1" = "-l" ]]; then
+			list_tests
+		elif [[ "$1" = "-h" || "$1" = "--help" ]]; then
+			usage
+		else
+			usage
+		fi
+	fi
+}
+
+test_reqs
+allow_user_defaults
+check_production_sysctl_writes_strict
+load_req_mod
+
+trap "test_finish" EXIT
+
+parse_args $@
+
+exit 0
diff --git a/tools/testing/selftests/timers/Makefile b/tools/testing/selftests/timers/Makefile
index 5801bbefbe89..a9b86133b9b3 100644
--- a/tools/testing/selftests/timers/Makefile
+++ b/tools/testing/selftests/timers/Makefile
@@ -9,7 +9,7 @@ TEST_GEN_PROGS = posix_timers nanosleep nsleep-lat set-timer-lat mqueue-lat \
 
 TEST_GEN_PROGS_EXTENDED = alarmtimer-suspend valid-adjtimex adjtick change_skew \
 		      skew_consistency clocksource-switch freq-step leap-a-day \
-		      leapcrash set-tai set-2038 set-tz
+		      leapcrash set-tai set-2038 set-tz rtctest_setdate
 
 
 include ../lib.mk
diff --git a/tools/testing/selftests/timers/rtctest.c b/tools/testing/selftests/timers/rtctest.c
index 4230d3052e5d..f61170f7b024 100644
--- a/tools/testing/selftests/timers/rtctest.c
+++ b/tools/testing/selftests/timers/rtctest.c
@@ -21,6 +21,9 @@
 #include <stdlib.h>
 #include <errno.h>
 
+#ifndef ARRAY_SIZE
+# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#endif
 
 /*
  * This expects the new RTC class driver framework, working with
@@ -29,23 +32,84 @@
  */
 static const char default_rtc[] = "/dev/rtc0";
 
+static struct rtc_time cutoff_dates[] = {
+	{
+		.tm_year = 70, /* 1970 -1900 */
+		.tm_mday = 1,
+	},
+	/* signed time_t 19/01/2038 3:14:08 */
+	{
+		.tm_year = 138,
+		.tm_mday = 19,
+	},
+	{
+		.tm_year = 138,
+		.tm_mday = 20,
+	},
+	{
+		.tm_year = 199, /* 2099 -1900 */
+		.tm_mday = 1,
+	},
+	{
+		.tm_year = 200, /* 2100 -1900 */
+		.tm_mday = 1,
+	},
+	/* unsigned time_t 07/02/2106 7:28:15*/
+	{
+		.tm_year = 205,
+		.tm_mon = 1,
+		.tm_mday = 7,
+	},
+	{
+		.tm_year = 206,
+		.tm_mon = 1,
+		.tm_mday = 8,
+	},
+	/* signed time on 64bit in nanoseconds 12/04/2262 01:47:16*/
+	{
+		.tm_year = 362,
+		.tm_mon = 3,
+		.tm_mday = 12,
+	},
+	{
+		.tm_year = 362, /* 2262 -1900 */
+		.tm_mon = 3,
+		.tm_mday = 13,
+	},
+};
+
+static int compare_dates(struct rtc_time *a, struct rtc_time *b)
+{
+	if (a->tm_year != b->tm_year ||
+	    a->tm_mon != b->tm_mon ||
+	    a->tm_mday != b->tm_mday ||
+	    a->tm_hour != b->tm_hour ||
+	    a->tm_min != b->tm_min ||
+	    ((b->tm_sec - a->tm_sec) > 1))
+		return 1;
+
+	return 0;
+}
 
 int main(int argc, char **argv)
 {
-	int i, fd, retval, irqcount = 0;
+	int i, fd, retval, irqcount = 0, dangerous = 0;
 	unsigned long tmp, data;
 	struct rtc_time rtc_tm;
 	const char *rtc = default_rtc;
 	struct timeval start, end, diff;
 
 	switch (argc) {
+	case 3:
+		if (*argv[2] == 'd')
+			dangerous = 1;
 	case 2:
 		rtc = argv[1];
 		/* FALLTHROUGH */
 	case 1:
 		break;
 	default:
-		fprintf(stderr, "usage:  rtctest [rtcdev]\n");
+		fprintf(stderr, "usage:  rtctest [rtcdev] [d]\n");
 		return 1;
 	}
 
@@ -202,7 +266,7 @@ test_PIE:
 		/* not all RTCs support periodic IRQs */
 		if (errno == EINVAL) {
 			fprintf(stderr, "\nNo periodic IRQ support\n");
-			goto done;
+			goto test_DATE;
 		}
 		perror("RTC_IRQP_READ ioctl");
 		exit(errno);
@@ -221,7 +285,7 @@ test_PIE:
 			if (errno == EINVAL) {
 				fprintf(stderr,
 					"\n...Periodic IRQ rate is fixed\n");
-				goto done;
+				goto test_DATE;
 			}
 			perror("RTC_IRQP_SET ioctl");
 			exit(errno);
@@ -269,6 +333,62 @@ test_PIE:
 		}
 	}
 
+test_DATE:
+	if (!dangerous)
+		goto done;
+
+	fprintf(stderr, "\nTesting problematic dates\n");
+
+	for (i = 0; i < ARRAY_SIZE(cutoff_dates); i++) {
+		struct rtc_time current;
+
+		/* Write the new date in RTC */
+		retval = ioctl(fd, RTC_SET_TIME, &cutoff_dates[i]);
+		if (retval == -1) {
+			perror("RTC_SET_TIME ioctl");
+			close(fd);
+			exit(errno);
+		}
+
+		/* Read back */
+		retval = ioctl(fd, RTC_RD_TIME, &current);
+		if (retval == -1) {
+			perror("RTC_RD_TIME ioctl");
+			exit(errno);
+		}
+
+		if(compare_dates(&cutoff_dates[i], &current)) {
+			fprintf(stderr,"Setting date %d failed\n",
+			        cutoff_dates[i].tm_year + 1900);
+			goto done;
+		}
+
+		cutoff_dates[i].tm_sec += 5;
+
+		/* Write the new alarm in RTC */
+		retval = ioctl(fd, RTC_ALM_SET, &cutoff_dates[i]);
+		if (retval == -1) {
+			perror("RTC_ALM_SET ioctl");
+			close(fd);
+			exit(errno);
+		}
+
+		/* Read back */
+		retval = ioctl(fd, RTC_ALM_READ, &current);
+		if (retval == -1) {
+			perror("RTC_ALM_READ ioctl");
+			exit(errno);
+		}
+
+		if(compare_dates(&cutoff_dates[i], &current)) {
+			fprintf(stderr,"Setting alarm %d failed\n",
+			        cutoff_dates[i].tm_year + 1900);
+			goto done;
+		}
+
+		fprintf(stderr, "Setting year %d is OK \n",
+			cutoff_dates[i].tm_year + 1900);
+	}
 done:
 	fprintf(stderr, "\n\n\t\t\t *** Test complete ***\n");
 
diff --git a/tools/testing/selftests/timers/rtctest_setdate.c b/tools/testing/selftests/timers/rtctest_setdate.c
new file mode 100644
index 000000000000..2cb78489eca4
--- /dev/null
+++ b/tools/testing/selftests/timers/rtctest_setdate.c
@@ -0,0 +1,86 @@
+/* Real Time Clock Driver Test
+ *	by: Benjamin Gaignard (benjamin.gaignard@linaro.org)
+ *
+ * To build
+ *	gcc rtctest_setdate.c -o rtctest_setdate
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <linux/rtc.h>
+#include <sys/ioctl.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <errno.h>
+
+static const char default_time[] = "00:00:00";
+
+int main(int argc, char **argv)
+{
+	int fd, retval;
+	struct rtc_time new, current;
+	const char *rtc, *date;
+	const char *time = default_time;
+
+	switch (argc) {
+	case 4:
+		time = argv[3];
+		/* FALLTHROUGH */
+	case 3:
+		date = argv[2];
+		rtc = argv[1];
+		break;
+	default:
+		fprintf(stderr, "usage: rtctest_setdate <rtcdev> <DD-MM-YYYY> [HH:MM:SS]\n");
+		return 1;
+	}
+
+	fd = open(rtc, O_RDONLY);
+	if (fd == -1) {
+		perror(rtc);
+		exit(errno);
+	}
+
+	sscanf(date, "%d-%d-%d", &new.tm_mday, &new.tm_mon, &new.tm_year);
+	new.tm_mon -= 1;
+	new.tm_year -= 1900;
+	sscanf(time, "%d:%d:%d", &new.tm_hour, &new.tm_min, &new.tm_sec);
+
+	fprintf(stderr, "Test will set RTC date/time to %d-%d-%d, %02d:%02d:%02d.\n",
+		new.tm_mday, new.tm_mon + 1, new.tm_year + 1900,
+		new.tm_hour, new.tm_min, new.tm_sec);
+
+	/* Write the new date in RTC */
+	retval = ioctl(fd, RTC_SET_TIME, &new);
+	if (retval == -1) {
+		perror("RTC_SET_TIME ioctl");
+		close(fd);
+		exit(errno);
+	}
+
+	/* Read back */
+	retval = ioctl(fd, RTC_RD_TIME, &current);
+	if (retval == -1) {
+		perror("RTC_RD_TIME ioctl");
+		exit(errno);
+	}
+
+	fprintf(stderr, "\n\nCurrent RTC date/time is %d-%d-%d, %02d:%02d:%02d.\n",
+		current.tm_mday, current.tm_mon + 1, current.tm_year + 1900,
+		current.tm_hour, current.tm_min, current.tm_sec);
+
+	close(fd);
+	return 0;
+}