summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt2
-rw-r--r--Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt7
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3660.dtsi20
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts75
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3670.dtsi62
-rw-r--r--arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi115
6 files changed, 277 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
index 07242d141773..36c4bea675d5 100644
--- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
@@ -13,6 +13,8 @@ Required Properties:
* compatible: should be one of the following.
- "hisilicon,hi3660-dw-mshc": for controllers with hi3660 specific extensions.
+ - "hisilicon,hi3670-dw-mshc", "hisilicon,hi3660-dw-mshc": for controllers
+ with hi3670 specific extensions.
- "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions.
- "hisilicon,hi6220-dw-mshc": for controllers with hi6220 specific extensions.
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt
index 2bf3344b2a02..2df4bddeb688 100644
--- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt
+++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt
@@ -5,11 +5,12 @@ Please also refer to reset.txt in this directory for common reset
controller binding usage.
The reset controller registers are part of the system-ctl block on
-hi3660 SoC.
+hi3660 and hi3670 SoCs.
Required properties:
-- compatible: should be
- "hisilicon,hi3660-reset"
+- compatible: should be one of the following:
+ "hisilicon,hi3660-reset" for HI3660
+ "hisilicon,hi3670-reset", "hisilicon,hi3660-reset" for HI3670
- hisi,rst-syscon: phandle of the reset's syscon.
- #reset-cells : Specifies the number of cells needed to encode a
reset source. The type shall be a <u32> and the value shall be 2.
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 2f19e0e5b7cf..aa6a8ad31be2 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -478,6 +478,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf00000 0x0 0x1000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ dma-names = "rx", "tx";
+ dmas = <&dma0 2 &dma0 3>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>,
<&crg_ctrl HI3660_CLK_GATE_UART1>;
clock-names = "uartclk", "apb_pclk";
@@ -490,6 +492,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf03000 0x0 0x1000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ dma-names = "rx", "tx";
+ dmas = <&dma0 4 &dma0 5>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>,
<&crg_ctrl HI3660_PCLK>;
clock-names = "uartclk", "apb_pclk";
@@ -514,6 +518,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf01000 0x0 0x1000>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ dma-names = "rx", "tx";
+ dmas = <&dma0 6 &dma0 7>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>,
<&crg_ctrl HI3660_CLK_GATE_UART4>;
clock-names = "uartclk", "apb_pclk";
@@ -526,6 +532,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf05000 0x0 0x1000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ dma-names = "rx", "tx";
+ dmas = <&dma0 8 &dma0 9>;
clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>,
<&crg_ctrl HI3660_CLK_GATE_UART5>;
clock-names = "uartclk", "apb_pclk";
@@ -552,13 +560,23 @@
#dma-cells = <1>;
dma-channels = <16>;
dma-requests = <32>;
- dma-min-chan = <1>;
+ dma-channel-mask = <0xfffe>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_CLK_GATE_DMAC>;
dma-no-cci;
dma-type = "hi3660_dma";
};
+ asp_dmac: dma-controller@e804b000 {
+ compatible = "hisilicon,hisi-pcm-asp-dma-1.0";
+ reg = <0x0 0xe804b000 0x0 0x1000>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ dma-requests = <32>;
+ interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "asp_dma_irq";
+ };
+
rtc0: rtc@fff04000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0x0 0Xfff04000 0x0 0x1000>;
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index c9775b66629f..7dac33d4fd5c 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -8,6 +8,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "hi3670.dtsi"
#include "hikey970-pinctrl.dtsi"
@@ -17,6 +18,8 @@
compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
aliases {
+ mshc1 = &dwmmc1;
+ mshc2 = &dwmmc2;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@@ -35,6 +38,37 @@
/* expect bootloader to fill in this region */
reg = <0x0 0x0 0x0 0x0>;
};
+
+ sd_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ sd_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ wlan_en: wlan-en-1-8v {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ /* GPIO_051_WIFI_EN */
+ gpio = <&gpio6 3 0>;
+
+ /* WLAN card specific delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
};
/*
@@ -354,6 +388,47 @@
"GPIO_231_HDMI_INT";
};
+&dwmmc1 {
+ bus-width = <0x4>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ cap-sd-highspeed;
+ disable-wp;
+ cd-inverted;
+ cd-gpios = <&gpio25 5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_pmx_func
+ &sd_clk_cfg_func
+ &sd_cfg_func>;
+ vmmc-supply = <&sd_3v3>;
+ vqmmc-supply = <&sd_1v8>;
+ status = "okay";
+};
+
+&dwmmc2 { /* WIFI */
+ bus-width = <0x4>;
+ non-removable;
+ broken-cd;
+ cap-power-off-card;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_pmx_func
+ &sdio_clk_cfg_func
+ &sdio_cfg_func>;
+ /* WL_EN */
+ vmmc-supply = <&wlan_en>;
+ status = "ok";
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>; /* sdio func num */
+ /* WL_IRQ, GPIO_177_WL_WAKEUP_AP */
+ interrupt-parent = <&gpio22>;
+ interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
&uart0 {
/* On High speed expansion header */
label = "HS-UART0";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
index 2ed06e4588b8..2dcffa3ed218 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -151,6 +151,13 @@
#clock-cells = <1>;
};
+ crg_rst: crg_rst_controller {
+ compatible = "hisilicon,hi3670-reset",
+ "hisilicon,hi3660-reset";
+ #reset-cells = <2>;
+ hisi,rst-syscon = <&crg_ctrl>;
+ };
+
pctrl: pctrl@e8a09000 {
compatible = "hisilicon,hi3670-pctrl", "syscon";
reg = <0x0 0xe8a09000 0x0 0x1000>;
@@ -647,5 +654,60 @@
clocks = <&sctrl HI3670_PCLK_AO_GPIO6>;
clock-names = "apb_pclk";
};
+
+ /* UFS */
+ ufs: ufs@ff3c0000 {
+ compatible = "hisilicon,hi3670-ufs", "jedec,ufs-2.1";
+ /* 0: HCI standard */
+ /* 1: UFS SYS CTRL */
+ reg = <0x0 0xff3c0000 0x0 0x1000>,
+ <0x0 0xff3e0000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>,
+ <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>;
+ clock-names = "ref_clk", "phy_clk";
+ freq-table-hz = <0 0>, <0 0>;
+ /* offset: 0x84; bit: 12 */
+ resets = <&crg_rst 0x84 12>;
+ reset-names = "rst";
+ };
+
+ /* SD */
+ dwmmc1: dwmmc1@ff37f000 {
+ compatible = "hisilicon,hi3670-dw-mshc",
+ "hisilicon,hi3660-dw-mshc";
+ reg = <0x0 0xff37f000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3670_CLK_GATE_SD>,
+ <&crg_ctrl HI3670_HCLK_GATE_SD>;
+ clock-names = "ciu", "biu";
+ clock-frequency = <3200000>;
+ resets = <&crg_rst 0x94 18>;
+ reset-names = "reset";
+ hisilicon,peripheral-syscon = <&sctrl>;
+ card-detect-delay = <200>;
+ status = "disabled";
+ };
+
+ /* SDIO */
+ dwmmc2: dwmmc2@fc183000 {
+ compatible = "hisilicon,hi3670-dw-mshc",
+ "hisilicon,hi3660-dw-mshc";
+ reg = <0x0 0xfc183000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3670_CLK_GATE_SDIO>,
+ <&crg_ctrl HI3670_HCLK_GATE_SDIO>;
+ clock-names = "ciu", "biu";
+ clock-frequency = <3200000>;
+ resets = <&crg_rst 0x94 20>;
+ reset-names = "reset";
+ card-detect-delay = <200>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
index 67bb52d43619..d456b0aa6f58 100644
--- a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
@@ -196,6 +196,16 @@
/* pin base, nr pins & gpio function */
pinctrl-single,gpio-range = <&range 0 10 0>;
+ sdio_pmx_func: sdio_pmx_func {
+ pinctrl-single,pins = <
+ 0x000 MUX_M1 /* SDIO_CLK */
+ 0x004 MUX_M1 /* SDIO_CMD */
+ 0x008 MUX_M1 /* SDIO_DATA0 */
+ 0x00c MUX_M1 /* SDIO_DATA1 */
+ 0x010 MUX_M1 /* SDIO_DATA2 */
+ 0x014 MUX_M1 /* SDIO_DATA3 */
+ >;
+ };
};
pmx6: pinmux@fc182800 {
@@ -203,6 +213,52 @@
reg = <0x0 0xfc182800 0x0 0x028>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <0x20>;
+
+ sdio_clk_cfg_func: sdio_clk_cfg_func {
+ pinctrl-single,pins = <
+ 0x000 0x0 /* SDIO_CLK */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE6_32MA DRIVE6_MASK
+ >;
+ };
+
+ sdio_cfg_func: sdio_cfg_func {
+ pinctrl-single,pins = <
+ 0x004 0x0 /* SDIO_CMD */
+ 0x008 0x0 /* SDIO_DATA0 */
+ 0x00c 0x0 /* SDIO_DATA1 */
+ 0x010 0x0 /* SDIO_DATA2 */
+ 0x014 0x0 /* SDIO_DATA3 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE6_19MA DRIVE6_MASK
+ >;
+ };
};
pmx7: pinmux@ff37e000 {
@@ -214,6 +270,17 @@
pinctrl-single,function-mask = <7>;
/* pin base, nr pins & gpio function */
pinctrl-single,gpio-range = <&range 0 12 0>;
+
+ sd_pmx_func: sd_pmx_func {
+ pinctrl-single,pins = <
+ 0x000 MUX_M1 /* SD_CLK */
+ 0x004 MUX_M1 /* SD_CMD */
+ 0x008 MUX_M1 /* SD_DATA0 */
+ 0x00c MUX_M1 /* SD_DATA1 */
+ 0x010 MUX_M1 /* SD_DATA2 */
+ 0x014 MUX_M1 /* SD_DATA3 */
+ >;
+ };
};
pmx8: pinmux@ff37e800 {
@@ -221,6 +288,54 @@
reg = <0x0 0xff37e800 0x0 0x030>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <0x20>;
+
+ sd_clk_cfg_func: sd_clk_cfg_func {
+ pinctrl-single,pins = <
+ 0x000 0x0 /* SD_CLK */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_DIS
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE6_32MA
+ DRIVE6_MASK
+ >;
+ };
+
+ sd_cfg_func: sd_cfg_func {
+ pinctrl-single,pins = <
+ 0x004 0x0 /* SD_CMD */
+ 0x008 0x0 /* SD_DATA0 */
+ 0x00c 0x0 /* SD_DATA1 */
+ 0x010 0x0 /* SD_DATA2 */
+ 0x014 0x0 /* SD_DATA3 */
+ >;
+ pinctrl-single,bias-pulldown = <
+ PULL_DIS
+ PULL_DOWN
+ PULL_DIS
+ PULL_DOWN
+ >;
+ pinctrl-single,bias-pullup = <
+ PULL_UP
+ PULL_UP
+ PULL_DIS
+ PULL_UP
+ >;
+ pinctrl-single,drive-strength = <
+ DRIVE6_19MA
+ DRIVE6_MASK
+ >;
+ };
};
pmx1: pinmux@fff11000 {
generated by cgit (git 2.34.1) at 2025-10-31 07:02:41 +0000