diff options
| -rw-r--r-- | drivers/net/dsa/vitesse-vsc73xx-core.c | 54 | ||||
| -rw-r--r-- | drivers/net/phy/vitesse.c | 14 |
2 files changed, 41 insertions, 27 deletions
diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c index d9d3e30fd47a..e3f95d2cc2c1 100644 --- a/drivers/net/dsa/vitesse-vsc73xx-core.c +++ b/drivers/net/dsa/vitesse-vsc73xx-core.c @@ -40,6 +40,10 @@ #define VSC73XX_BLOCK_ARBITER 0x5 /* Only subblock 0 */ #define VSC73XX_BLOCK_SYSTEM 0x7 /* Only subblock 0 */ +/* MII Block subblock */ +#define VSC73XX_BLOCK_MII_INTERNAL 0x0 /* Internal MDIO subblock */ +#define VSC73XX_BLOCK_MII_EXTERNAL 0x1 /* External MDIO subblock */ + #define CPU_PORT 6 /* CPU port */ /* MAC Block registers */ @@ -225,6 +229,8 @@ #define VSC73XX_MII_CMD 0x1 #define VSC73XX_MII_DATA 0x2 +#define VSC73XX_MII_STAT_BUSY BIT(3) + /* Arbiter block 5 registers */ #define VSC73XX_ARBEMPTY 0x0c #define VSC73XX_ARBDISC 0x0e @@ -299,6 +305,7 @@ #define IS_739X(a) (IS_7395(a) || IS_7398(a)) #define VSC73XX_POLL_SLEEP_US 1000 +#define VSC73XX_MDIO_POLL_SLEEP_US 5 #define VSC73XX_POLL_TIMEOUT_US 10000 struct vsc73xx_counter { @@ -527,6 +534,22 @@ static int vsc73xx_detect(struct vsc73xx *vsc) return 0; } +static int vsc73xx_mdio_busy_check(struct vsc73xx *vsc) +{ + int ret, err; + u32 val; + + ret = read_poll_timeout(vsc73xx_read, err, + err < 0 || !(val & VSC73XX_MII_STAT_BUSY), + VSC73XX_MDIO_POLL_SLEEP_US, + VSC73XX_POLL_TIMEOUT_US, false, vsc, + VSC73XX_BLOCK_MII, VSC73XX_BLOCK_MII_INTERNAL, + VSC73XX_MII_STAT, &val); + if (ret) + return ret; + return err; +} + static int vsc73xx_phy_read(struct dsa_switch *ds, int phy, int regnum) { struct vsc73xx *vsc = ds->priv; @@ -534,12 +557,20 @@ static int vsc73xx_phy_read(struct dsa_switch *ds, int phy, int regnum) u32 val; int ret; + ret = vsc73xx_mdio_busy_check(vsc); + if (ret) + return ret; + /* Setting bit 26 means "read" */ cmd = BIT(26) | (phy << 21) | (regnum << 16); ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd); if (ret) return ret; - msleep(2); + + ret = vsc73xx_mdio_busy_check(vsc); + if (ret) + return ret; + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MII, 0, 2, &val); if (ret) return ret; @@ -563,18 +594,11 @@ static int vsc73xx_phy_write(struct dsa_switch *ds, int phy, int regnum, u32 cmd; int ret; - /* It was found through tedious experiments that this router - * chip really hates to have it's PHYs reset. They - * never recover if that happens: autonegotiation stops - * working after a reset. Just filter out this command. - * (Resetting the whole chip is OK.) - */ - if (regnum == 0 && (val & BIT(15))) { - dev_info(vsc->dev, "reset PHY - disallowed\n"); - return 0; - } + ret = vsc73xx_mdio_busy_check(vsc); + if (ret) + return ret; - cmd = (phy << 21) | (regnum << 16); + cmd = (phy << 21) | (regnum << 16) | val; ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd); if (ret) return ret; @@ -957,6 +981,11 @@ static void vsc73xx_mac_link_up(struct phylink_config *config, if (duplex == DUPLEX_FULL) val |= VSC73XX_MAC_CFG_FDX; + else + /* In datasheet description ("Port Mode Procedure" in 5.6.2) + * this bit is configured only for half duplex. + */ + val |= VSC73XX_MAC_CFG_WEXC_DIS; /* This routine is described in the datasheet (below ARBDISC register * description) @@ -967,7 +996,6 @@ static void vsc73xx_mac_link_up(struct phylink_config *config, get_random_bytes(&seed, 1); val |= seed << VSC73XX_MAC_CFG_SEED_OFFSET; val |= VSC73XX_MAC_CFG_SEED_LOAD; - val |= VSC73XX_MAC_CFG_WEXC_DIS; /* Those bits are responsible for MTU only. Kernel takes care about MTU, * let's enable +8 bytes frame length unconditionally. diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 897b979ec03c..3b5fcaf0dd36 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -237,16 +237,6 @@ static int vsc739x_config_init(struct phy_device *phydev) return 0; } -static int vsc73xx_config_aneg(struct phy_device *phydev) -{ - /* The VSC73xx switches does not like to be instructed to - * do autonegotiation in any way, it prefers that you just go - * with the power-on/reset defaults. Writing some registers will - * just make autonegotiation permanently fail. - */ - return 0; -} - /* This adds a skew for both TX and RX clocks, so the skew should only be * applied to "rgmii-id" interfaces. It may not work as expected * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces. @@ -444,7 +434,6 @@ static struct phy_driver vsc82xx_driver[] = { .phy_id_mask = 0x000ffff0, /* PHY_GBIT_FEATURES */ .config_init = vsc738x_config_init, - .config_aneg = vsc73xx_config_aneg, .read_page = vsc73xx_read_page, .write_page = vsc73xx_write_page, }, { @@ -453,7 +442,6 @@ static struct phy_driver vsc82xx_driver[] = { .phy_id_mask = 0x000ffff0, /* PHY_GBIT_FEATURES */ .config_init = vsc738x_config_init, - .config_aneg = vsc73xx_config_aneg, .read_page = vsc73xx_read_page, .write_page = vsc73xx_write_page, }, { @@ -462,7 +450,6 @@ static struct phy_driver vsc82xx_driver[] = { .phy_id_mask = 0x000ffff0, /* PHY_GBIT_FEATURES */ .config_init = vsc739x_config_init, - .config_aneg = vsc73xx_config_aneg, .read_page = vsc73xx_read_page, .write_page = vsc73xx_write_page, }, { @@ -471,7 +458,6 @@ static struct phy_driver vsc82xx_driver[] = { .phy_id_mask = 0x000ffff0, /* PHY_GBIT_FEATURES */ .config_init = vsc739x_config_init, - .config_aneg = vsc73xx_config_aneg, .read_page = vsc73xx_read_page, .write_page = vsc73xx_write_page, }, { |