diff options
| -rw-r--r-- | arch/arm64/boot/dts/qcom/Makefile | 4 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso | 89 |
2 files changed, 93 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 7c07eb0c0664..adb4d026bcc4 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -116,6 +116,10 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs615-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb + +qcs6490-rb3gen2-vision-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vision-mezzanine.dtbo + +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-vision-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs8300-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso new file mode 100644 index 000000000000..b9e4a5214f70 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/* + * Camera Sensor overlay on top of rb3gen2 core kit. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/clock/qcom,camcc-sc7280.h> +#include <dt-bindings/gpio/gpio.h> + +&camss { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* The port index denotes CSIPHY id i.e. csiphy3 */ + port@3 { + reg = <3>; + + csiphy3_ep: endpoint { + clock-lanes = <7>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&imx577_ep>; + }; + }; + }; +}; + +&cci1 { + status = "okay"; +}; + +&cci1_i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + camera@1a { + compatible = "sony,imx577"; + + reg = <0x1a>; + + reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "suspend"; + pinctrl-0 = <&cam2_default>; + pinctrl-1 = <&cam2_suspend>; + + clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clock-rates = <24000000>; + + dovdd-supply = <&vreg_l18b_1p8>; + avdd-supply = <&vph_pwr>; + dvdd-supply = <&vph_pwr>; + + port { + imx577_ep: endpoint { + link-frequencies = /bits/ 64 <600000000>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csiphy3_ep>; + }; + }; + }; +}; + +&tlmm { + cam2_default: cam2-default-state { + pins = "gpio67"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam2_suspend: cam2-suspend-state { + pins = "gpio67"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; +}; |