diff options
| -rw-r--r-- | Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt | 39 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml | 116 |
2 files changed, 116 insertions, 39 deletions
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt deleted file mode 100644 index c8c1e913f4e7..000000000000 --- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt +++ /dev/null @@ -1,39 +0,0 @@ -GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) - -The QUP v3 core is a GENI based AHB slave that provides a common data path -(an output FIFO and an input FIFO) for serial peripheral interface (SPI) -mini-core. - -SPI in master mode supports up to 50MHz, up to four chip selects, programmable -data path from 4 bits to 32 bits and numerous protocol variants. - -Required properties: -- compatible: Must contain "qcom,geni-spi". -- reg: Must contain SPI register location and length. -- interrupts: Must contain SPI controller interrupts. -- clock-names: Must contain "se". -- clocks: Serial engine core clock needed by the device. -- #address-cells: Must be <1> to define a chip select address on - the SPI bus. -- #size-cells: Must be <0>. - -SPI Controller nodes must be child of GENI based Qualcomm Universal -Peripharal. Please refer GENI based QUP wrapper controller node bindings -described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml. - -SPI slave nodes must be children of the SPI master node and conform to SPI bus -binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt. - -Example: - spi0: spi@a84000 { - compatible = "qcom,geni-spi"; - reg = <0xa84000 0x4000>; - interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "se"; - clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qup_1_spi_2_active>; - pinctrl-1 = <&qup_1_spi_2_sleep>; - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml new file mode 100644 index 000000000000..e2c7b934c50d --- /dev/null +++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/qcom,spi-geni-qcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The QUP v3 core is a GENI based AHB slave that provides a common data path + (an output FIFO and an input FIFO) for serial peripheral interface (SPI) + mini-core. + + SPI in master mode supports up to 50MHz, up to four chip selects, + programmable data path from 4 bits to 32 bits and numerous protocol variants. + + SPI Controller nodes must be child of GENI based Qualcomm Universal + Peripharal. Please refer GENI based QUP wrapper controller node bindings + described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml. + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + const: qcom,geni-spi + + clocks: + maxItems: 1 + + clock-names: + const: se + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: qup-core + - const: qup-config + + interrupts: + maxItems: 1 + + operating-points-v2: true + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/interconnect/qcom,sc7180.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x00880000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + }; + + - | + #include <dt-bindings/dma/qcom-gpi.h> + + spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x00884000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + }; |