diff options
91 files changed, 3266 insertions, 1130 deletions
diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt index f00827c9b67f..18c3fc26ca93 100644 --- a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt +++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt @@ -19,7 +19,7 @@ which are described in the following files: - Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml - Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml - Documentation/devicetree/bindings/regulator/cpcap-regulator.txt -- Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt +- Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml - Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt - Documentation/devicetree/bindings/rtc/cpcap-rtc.txt - Documentation/devicetree/bindings/leds/leds-cpcap.txt diff --git a/Documentation/devicetree/bindings/phy/apm,xgene-phy.yaml b/Documentation/devicetree/bindings/phy/apm,xgene-phy.yaml new file mode 100644 index 000000000000..0674391feeae --- /dev/null +++ b/Documentation/devicetree/bindings/phy/apm,xgene-phy.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/apm,xgene-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: APM X-Gene 15Gbps Multi-purpose PHY + +maintainers: + - Khuong Dinh <khuong@os.amperecomputing.com> + +description: + PHY nodes are defined to describe on-chip 15Gbps Multi-purpose PHY. Each + PHY (pair of lanes) has its own node. + +properties: + compatible: + items: + - const: apm,xgene-phy + + reg: + maxItems: 1 + + '#phy-cells': + description: + Possible values are 0 (SATA), 1 (SGMII), 2 (PCIe), 3 (USB), and 4 (XFI). + const: 1 + + clocks: + maxItems: 1 + + apm,tx-eye-tuning: + description: + Manual control to fine tune the capture of the serial bit lines from the + automatic calibrated position. Two set of 3-tuple setting for each + supported link speed on the host. Range from 0 to 127 in unit of one bit + period. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 2 + maxItems: 2 + items: + minItems: 3 + maxItems: 3 + items: + minimum: 0 + maximum: 127 + default: 10 + + apm,tx-eye-direction: + description: + Eye tuning manual control direction. 0 means sample data earlier than the + nominal sampling point. 1 means sample data later than the nominal + sampling point. Two set of 3-tuple setting for each supported link speed + on the host. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 2 + maxItems: 2 + items: + minItems: 3 + maxItems: 3 + items: + enum: [0, 1] + default: 0 + + apm,tx-boost-gain: + description: + Frequency boost AC (LSB 3-bit) and DC (2-bit) gain control. Two set of + 3-tuple setting for each supported link speed on the host. Range is + between 0 to 31 in unit of dB. Default is 3. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 2 + maxItems: 2 + items: + minItems: 3 + maxItems: 3 + items: + minimum: 0 + maximum: 31 + + apm,tx-amplitude: + description: + Amplitude control. Two set of 3-tuple setting for each supported link + speed on the host. Range is between 0 to 199500 in unit of uV. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 2 + maxItems: 2 + items: + minItems: 3 + maxItems: 3 + items: + minimum: 0 + maximum: 199500 + default: 199500 + + apm,tx-pre-cursor1: + description: + 1st pre-cursor emphasis taps control. Two set of 3-tuple setting for + each supported link speed on the host. Range is 0 to 273000 in unit of + uV. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 2 + maxItems: 2 + items: + minItems: 3 + maxItems: 3 + items: + minimum: 0 + maximum: 273000 + default: 0 + + apm,tx-pre-cursor2: + description: + 2nd pre-cursor emphasis taps control. Two set of 3-tuple setting for + each supported link speed on the host. Range is 0 to 127400 in unit uV. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 2 + maxItems: 2 + items: + minItems: 3 + maxItems: 3 + items: + minimum: 0 + maximum: 127400 + default: 0 + + apm,tx-post-cursor: + description: | + Post-cursor emphasis taps control. Two set of 3-tuple setting for Gen1, + Gen2, and Gen3 link speeds. Range is between 0 to 31 in unit of 18.2mV. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 2 + maxItems: 2 + items: + minItems: 3 + maxItems: 3 + items: + minimum: 0 + maximum: 31 + default: 0xf + + apm,tx-speed: + description: > + Tx operating speed. One set of 3-tuple for each supported link speed on + the host: + + 0 = 1-2Gbps + 1 = 2-4Gbps (1st tuple default) + 2 = 4-8Gbps + 3 = 8-15Gbps (2nd tuple default) + 4 = 2.5-4Gbps + 5 = 4-5Gbps + 6 = 5-6Gbps + 7 = 6-16Gbps (3rd tuple default). + + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + maximum: 7 + +additionalProperties: false + +examples: + - | + phy@1f21a000 { + compatible = "apm,xgene-phy"; + reg = <0x1f21a000 0x100>; + #phy-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt deleted file mode 100644 index 602cf952b92b..000000000000 --- a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt +++ /dev/null @@ -1,76 +0,0 @@ -* APM X-Gene 15Gbps Multi-purpose PHY nodes - -PHY nodes are defined to describe on-chip 15Gbps Multi-purpose PHY. Each -PHY (pair of lanes) has its own node. - -Required properties: -- compatible : Shall be "apm,xgene-phy". -- reg : PHY memory resource is the SDS PHY access resource. -- #phy-cells : Shall be 1 as it expects one argument for setting - the mode of the PHY. Possible values are 0 (SATA), - 1 (SGMII), 2 (PCIe), 3 (USB), and 4 (XFI). - -Optional properties: -- status : Shall be "ok" if enabled or "disabled" if disabled. - Default is "ok". -- clocks : Reference to the clock entry. -- apm,tx-eye-tuning : Manual control to fine tune the capture of the serial - bit lines from the automatic calibrated position. - Two set of 3-tuple setting for each (up to 3) - supported link speed on the host. Range from 0 to - 127 in unit of one bit period. Default is 10. -- apm,tx-eye-direction : Eye tuning manual control direction. 0 means sample - data earlier than the nominal sampling point. 1 means - sample data later than the nominal sampling point. - Two set of 3-tuple setting for each (up to 3) - supported link speed on the host. Default is 0. -- apm,tx-boost-gain : Frequency boost AC (LSB 3-bit) and DC (2-bit) - gain control. Two set of 3-tuple setting for each - (up to 3) supported link speed on the host. Range is - between 0 to 31 in unit of dB. Default is 3. -- apm,tx-amplitude : Amplitude control. Two set of 3-tuple setting for - each (up to 3) supported link speed on the host. - Range is between 0 to 199500 in unit of uV. - Default is 199500 uV. -- apm,tx-pre-cursor1 : 1st pre-cursor emphasis taps control. Two set of - 3-tuple setting for each (up to 3) supported link - speed on the host. Range is 0 to 273000 in unit of - uV. Default is 0. -- apm,tx-pre-cursor2 : 2nd pre-cursor emphasis taps control. Two set of - 3-tuple setting for each (up to 3) supported link - speed on the host. Range is 0 to 127400 in unit uV. - Default is 0x0. -- apm,tx-post-cursor : Post-cursor emphasis taps control. Two set of - 3-tuple setting for Gen1, Gen2, and Gen3. Range is - between 0 to 0x1f in unit of 18.2mV. Default is 0xf. -- apm,tx-speed : Tx operating speed. One set of 3-tuple for each - supported link speed on the host. - 0 = 1-2Gbps - 1 = 2-4Gbps (1st tuple default) - 2 = 4-8Gbps - 3 = 8-15Gbps (2nd tuple default) - 4 = 2.5-4Gbps - 5 = 4-5Gbps - 6 = 5-6Gbps - 7 = 6-16Gbps (3rd tuple default) - -NOTE: PHY override parameters are board specific setting. - -Example: - phy1: phy@1f21a000 { - compatible = "apm,xgene-phy"; - reg = <0x0 0x1f21a000 0x0 0x100>; - #phy-cells = <1>; - }; - - phy2: phy@1f22a000 { - compatible = "apm,xgene-phy"; - reg = <0x0 0x1f22a000 0x0 0x100>; - #phy-cells = <1>; - }; - - phy3: phy@1f23a000 { - compatible = "apm,xgene-phy"; - reg = <0x0 0x1f23a000 0x0 0x100>; - #phy-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt b/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt deleted file mode 100644 index c0155f842f62..000000000000 --- a/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt +++ /dev/null @@ -1,36 +0,0 @@ -Berlin SATA PHY ---------------- - -Required properties: -- compatible: should be one of - "marvell,berlin2-sata-phy" - "marvell,berlin2q-sata-phy" -- address-cells: should be 1 -- size-cells: should be 0 -- phy-cells: from the generic PHY bindings, must be 1 -- reg: address and length of the register -- clocks: reference to the clock entry - -Sub-nodes: -Each PHY should be represented as a sub-node. - -Sub-nodes required properties: -- reg: the PHY number - -Example: - sata_phy: phy@f7e900a0 { - compatible = "marvell,berlin2q-sata-phy"; - reg = <0xf7e900a0 0x200>; - clocks = <&chip CLKID_SATA>; - #address-cells = <1>; - #size-cells = <0>; - #phy-cells = <1>; - - sata-phy@0 { - reg = <0>; - }; - - sata-phy@1 { - reg = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt b/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt deleted file mode 100644 index be33780f668e..000000000000 --- a/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt +++ /dev/null @@ -1,16 +0,0 @@ -* Marvell Berlin USB PHY - -Required properties: -- compatible: "marvell,berlin2-usb-phy" or "marvell,berlin2cd-usb-phy" -- reg: base address and length of the registers -- #phys-cells: should be 0 -- resets: reference to the reset controller - -Example: - - usb-phy@f774000 { - compatible = "marvell,berlin2-usb-phy"; - reg = <0xf774000 0x128>; - #phy-cells = <0>; - resets = <&chip 0x104 14>; - }; diff --git a/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt deleted file mode 100644 index 04f063aa7883..000000000000 --- a/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt +++ /dev/null @@ -1,30 +0,0 @@ -BROADCOM NORTHSTAR2 USB2 (DUAL ROLE DEVICE) PHY - -Required properties: - - compatible: brcm,ns2-drd-phy - - reg: offset and length of the NS2 PHY related registers. - - reg-names - The below registers must be provided. - icfg - for DRD ICFG configurations - rst-ctrl - for DRD IDM reset - crmu-ctrl - for CRMU core vdd, PHY and PHY PLL reset - usb2-strap - for port over current polarity reversal - - #phy-cells: Must be 0. No args required. - - vbus-gpios: vbus gpio binding - - id-gpios: id gpio binding - -Refer to phy/phy-bindings.txt for the generic PHY binding properties - -Example: - usbdrd_phy: phy@66000960 { - #phy-cells = <0>; - compatible = "brcm,ns2-drd-phy"; - reg = <0x66000960 0x24>, - <0x67012800 0x4>, - <0x6501d148 0x4>, - <0x664d0700 0x4>; - reg-names = "icfg", "rst-ctrl", - "crmu-ctrl", "usb2-strap"; - id-gpios = <&gpio_g 30 0>; - vbus-gpios = <&gpio_g 31 0>; - }; diff --git a/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.yaml new file mode 100644 index 000000000000..1fab97de5c0d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/brcm,ns2-drd-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Northstar2 USB2 Dual Role Device PHY + +maintainers: + - Florian Fainelli <florian.fainelli@broadcom.com> + - Hauke Mehrtens <hauke@hauke-m.de> + - Rafał Miłecki <zajec5@gmail.com> + +properties: + compatible: + const: brcm,ns2-drd-phy + + reg: + items: + - description: DRD ICFG configurations + - description: DRD IDM reset + - description: CRMU core vdd, PHY and PHY PLL reset + - description: Port over current polarity reversal + + reg-names: + items: + - const: icfg + - const: rst-ctrl + - const: crmu-ctrl + - const: usb2-strap + + '#phy-cells': + const: 0 + + id-gpios: + maxItems: 1 + description: ID GPIO line + + vbus-gpios: + maxItems: 1 + description: VBUS GPIO line + +required: + - '#phy-cells' + - compatible + - reg + - reg-names + - id-gpios + - vbus-gpios + +additionalProperties: false + +examples: + - | + phy@66000960 { + #phy-cells = <0>; + compatible = "brcm,ns2-drd-phy"; + reg = <0x66000960 0x24>, <0x67012800 0x4>, <0x6501d148 0x4>, <0x664d0700 0x4>; + reg-names = "icfg", "rst-ctrl", "crmu-ctrl", "usb2-strap"; + id-gpios = <&gpio_g 30 0>; + vbus-gpios = <&gpio_g 31 0>; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt deleted file mode 100644 index e8d82286beb9..000000000000 --- a/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt +++ /dev/null @@ -1,41 +0,0 @@ -Broadcom Stingray PCIe PHY - -Required properties: -- compatible: must be "brcm,sr-pcie-phy" -- reg: base address and length of the PCIe SS register space -- brcm,sr-cdru: phandle to the CDRU syscon node -- brcm,sr-mhb: phandle to the MHB syscon node -- #phy-cells: Must be 1, denotes the PHY index - -For PAXB based root complex, one can have a configuration of up to 8 PHYs -PHY index goes from 0 to 7 - -For the internal PAXC based root complex, PHY index is always 8 - -Example: - mhb: syscon@60401000 { - compatible = "brcm,sr-mhb", "syscon"; - reg = <0 0x60401000 0 0x38c>; - }; - - cdru: syscon@6641d000 { - compatible = "brcm,sr-cdru", "syscon"; - reg = <0 0x6641d000 0 0x400>; - }; - - pcie_phy: phy@40000000 { - compatible = "brcm,sr-pcie-phy"; - reg = <0 0x40000000 0 0x800>; - brcm,sr-cdru = <&cdru>; - brcm,sr-mhb = <&mhb>; - #phy-cells = <1>; - }; - - /* users of the PCIe PHY */ - - pcie0: pcie@48000000 { - ... - ... - phys = <&pcie_phy 0>; - phy-names = "pcie-phy"; - }; diff --git a/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.yaml new file mode 100644 index 000000000000..60ccc0813ed5 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/brcm,sr-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Stingray PCIe PHY + +maintainers: + - Ray Jui <ray.jui@broadcom.com> + +description: > + For PAXB based root complex, one can have a configuration of up to 8 PHYs. + PHY index goes from 0 to 7. + + For the internal PAXC based root complex, PHY index is always 8. + +properties: + compatible: + const: brcm,sr-pcie-phy + + reg: + maxItems: 1 + + '#phy-cells': + const: 1 + + brcm,sr-cdru: + description: phandle to the CDRU syscon node + $ref: /schemas/types.yaml#/definitions/phandle + + brcm,sr-mhb: + description: phandle to the MHB syscon node + $ref: /schemas/types.yaml#/definitions/phandle + +additionalProperties: false + +examples: + - | + phy@40000000 { + compatible = "brcm,sr-pcie-phy"; + reg = <0x40000000 0x800>; + brcm,sr-cdru = <&cdru>; + brcm,sr-mhb = <&mhb>; + #phy-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm,sr-usb-combo-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,sr-usb-combo-phy.yaml new file mode 100644 index 000000000000..6224ba0f2990 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,sr-usb-combo-phy.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/brcm,sr-usb-combo-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Stingray USB PHY + +maintainers: + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +properties: + compatible: + enum: + - brcm,sr-usb-combo-phy + - brcm,sr-usb-hs-phy + + reg: + maxItems: 1 + + '#phy-cells': + description: PHY cell count indicating PHY type + enum: [ 0, 1 ] + +required: + - compatible + - reg + - '#phy-cells' + +allOf: + - if: + properties: + compatible: + contains: + const: brcm,sr-usb-combo-phy + then: + properties: + '#phy-cells': + const: 1 + - if: + properties: + compatible: + contains: + const: brcm,sr-usb-hs-phy + then: + properties: + '#phy-cells': + const: 0 + +additionalProperties: false + +examples: + - | + usb-phy@0 { + compatible = "brcm,sr-usb-combo-phy"; + reg = <0x00000000 0x100>; + #phy-cells = <1>; + }; + - | + usb-phy@20000 { + compatible = "brcm,sr-usb-hs-phy"; + reg = <0x00020000 0x100>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt deleted file mode 100644 index 4ba298966af9..000000000000 --- a/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt +++ /dev/null @@ -1,32 +0,0 @@ -Broadcom Stingray USB PHY - -Required properties: - - compatible : should be one of the listed compatibles - - "brcm,sr-usb-combo-phy" is combo PHY has two PHYs, one SS and one HS. - - "brcm,sr-usb-hs-phy" is a single HS PHY. - - reg: offset and length of the PHY blocks registers - - #phy-cells: - - Must be 1 for brcm,sr-usb-combo-phy as it expects one argument to indicate - the PHY number of two PHYs. 0 for HS PHY and 1 for SS PHY. - - Must be 0 for brcm,sr-usb-hs-phy. - -Refer to phy/phy-bindings.txt for the generic PHY binding properties - -Example: - usbphy0: usb-phy@0 { - compatible = "brcm,sr-usb-combo-phy"; - reg = <0x00000000 0x100>; - #phy-cells = <1>; - }; - - usbphy1: usb-phy@10000 { - compatible = "brcm,sr-usb-combo-phy"; - reg = <0x00010000 0x100>, - #phy-cells = <1>; - }; - - usbphy2: usb-phy@20000 { - compatible = "brcm,sr-usb-hs-phy"; - reg = <0x00020000 0x100>, - #phy-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/phy/dm816x-phy.txt b/Documentation/devicetree/bindings/phy/dm816x-phy.txt deleted file mode 100644 index 2fe3d11d063d..000000000000 --- a/Documentation/devicetree/bindings/phy/dm816x-phy.txt +++ /dev/null @@ -1,24 +0,0 @@ -Device tree binding documentation for am816x USB PHY -========================= - -Required properties: -- compatible : should be "ti,dm816x-usb-phy" -- reg : offset and length of the PHY register set. -- reg-names : name for the phy registers -- clocks : phandle to the clock -- clock-names : name of the clock -- syscon: phandle for the syscon node to access misc registers -- #phy-cells : from the generic PHY bindings, must be 1 -- syscon: phandle for the syscon node to access misc registers - -Example: - -usb_phy0: usb-phy@20 { - compatible = "ti,dm8168-usb-phy"; - reg = <0x20 0x8>; - reg-names = "phy"; - clocks = <&main_fapll 6>; - clock-names = "refclk"; - #phy-cells = <0>; - syscon = <&scm_conf>; -}; diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi6220-usb-phy.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi6220-usb-phy.yaml new file mode 100644 index 000000000000..376586a666e7 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/hisilicon,hi6220-usb-phy.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/hisilicon,hi6220-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon hi6220 USB PHY + +maintainers: + - Zhangfei Gao <zhangfei.gao@linaro.org> + +properties: + compatible: + const: hisilicon,hi6220-usb-phy + + '#phy-cells': + const: 0 + + phy-supply: + description: PHY power supply. + + hisilicon,peripheral-syscon: + description: Phandle to the system controller for PHY control. + $ref: /schemas/types.yaml#/definitions/phandle + +additionalProperties: false + +examples: + - | + usbphy { + compatible = "hisilicon,hi6220-usb-phy"; + #phy-cells = <0>; + phy-supply = <&fixed_5v_hub>; + hisilicon,peripheral-syscon = <&sys_ctrl>; + }; diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hix5hd2-sata-phy.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hix5hd2-sata-phy.yaml new file mode 100644 index 000000000000..2993dd6b40a8 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/hisilicon,hix5hd2-sata-phy.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/hisilicon,hix5hd2-sata-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon hix5hd2 SATA PHY + +maintainers: + - Jiancheng Xue <xuejiancheng@huawei.com> + +properties: + compatible: + const: hisilicon,hix5hd2-sata-phy + + reg: + maxItems: 1 + + '#phy-cells': + const: 0 + + hisilicon,peripheral-syscon: + description: Phandle of syscon used to control peripheral + $ref: /schemas/types.yaml#/definitions/phandle + + hisilicon,power-reg: + description: Offset and bit number within peripheral-syscon register controlling SATA power supply + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: Offset within peripheral-syscon register + - description: Bit number controlling SATA power supply + +required: + - compatible + - reg + - '#phy-cells' + +additionalProperties: false + +examples: + - | + phy@f9900000 { + compatible = "hisilicon,hix5hd2-sata-phy"; + reg = <0xf9900000 0x10000>; + #phy-cells = <0>; + hisilicon,peripheral-syscon = <&peripheral_ctrl>; + hisilicon,power-reg = <0x8 10>; + }; diff --git a/Documentation/devicetree/bindings/phy/hisilicon,inno-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/hisilicon,inno-usb2-phy.yaml new file mode 100644 index 000000000000..51ea0e54ce35 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/hisilicon,inno-usb2-phy.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/hisilicon,inno-usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon INNO USB2 PHY + +maintainers: + - Pengcheng Li <lpc.li@hisilicon.com> + +description: + The INNO USB2 PHY device should be a child node of peripheral controller that + contains the PHY configuration register, and each device supports up to 2 PHY + ports which are represented as child nodes of INNO USB2 PHY device. + +properties: + compatible: + enum: + - hisilicon,hi3798cv200-usb2-phy + - hisilicon,hi3798mv100-usb2-phy + - hisilicon,inno-usb2-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^phy@[0-1]$": + description: PHY port subnode + type: object + additionalProperties: false + + properties: + reg: + maximum: 1 + + "#phy-cells": + const: 0 + + resets: + maxItems: 1 + + required: + - reg + - "#phy-cells" + - resets + +required: + - compatible + - reg + - clocks + - resets + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/histb-clock.h> + + usb2-phy@120 { + compatible = "hisilicon,hi3798cv200-usb2-phy"; + reg = <0x120 0x4>; + clocks = <&crg HISTB_USB2_PHY1_REF_CLK>; + resets = <&crg 0xbc 4>; + #address-cells = <1>; + #size-cells = <0>; + + phy@0 { + reg = <0>; + #phy-cells = <0>; + resets = <&crg 0xbc 8>; + }; + + phy@1 { + reg = <1>; + #phy-cells = <0>; + resets = <&crg 0xbc 9>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/hix5hd2-phy.txt b/Documentation/devicetree/bindings/phy/hix5hd2-phy.txt deleted file mode 100644 index 296168b74d24..000000000000 --- a/Documentation/devicetree/bindings/phy/hix5hd2-phy.txt +++ /dev/null @@ -1,22 +0,0 @@ -Hisilicon hix5hd2 SATA PHY ------------------------ - -Required properties: -- compatible: should be "hisilicon,hix5hd2-sata-phy" -- reg: offset and length of the PHY registers -- #phy-cells: must be 0 -Refer to phy/phy-bindings.txt for the generic PHY binding properties - -Optional Properties: -- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral. -- hisilicon,power-reg: offset and bit number within peripheral-syscon, - register of controlling sata power supply. - -Example: - sata_phy: phy@f9900000 { - compatible = "hisilicon,hix5hd2-sata-phy"; - reg = <0xf9900000 0x10000>; - #phy-cells = <0>; - hisilicon,peripheral-syscon = <&peripheral_ctrl>; - hisilicon,power-reg = <0x8 10>; - }; diff --git a/Documentation/devicetree/bindings/phy/img,pistachio-usb-phy.yaml b/Documentation/devicetree/bindings/phy/img,pistachio-usb-phy.yaml new file mode 100644 index 000000000000..bcc19bc68297 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/img,pistachio-usb-phy.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/img,pistachio-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Imagination Pistachio USB PHY + +maintainers: + - Andrew Bresticker <abrestic@chromium.org> + +properties: + compatible: + const: img,pistachio-usb-phy + + clocks: + maxItems: 1 + + clock-names: + items: + - const: usb_phy + + '#phy-cells': + const: 0 + + phy-supply: + description: USB VBUS supply. Must supply 5.0V. + + img,refclk: + description: + Reference clock source for the USB PHY. See + <dt-bindings/phy/phy-pistachio-usb.h> for valid values. + $ref: /schemas/types.yaml#/definitions/uint32 + + img,cr-top: + description: CR_TOP syscon phandle. + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - clocks + - clock-names + - '#phy-cells' + - img,refclk + - img,cr-top + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy-pistachio-usb.h> + #include <dt-bindings/clock/pistachio-clk.h> + + usb-phy { + compatible = "img,pistachio-usb-phy"; + clocks = <&clk_core CLK_USB_PHY>; + clock-names = "usb_phy"; + #phy-cells = <0>; + phy-supply = <&usb_vbus>; + img,refclk = <REFCLK_CLK_CORE>; + img,cr-top = <&cr_top>; + }; diff --git a/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt b/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt deleted file mode 100644 index 300830dda0bf..000000000000 --- a/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt +++ /dev/null @@ -1,19 +0,0 @@ -TI Keystone USB PHY - -Required properties: - - compatible: should be "ti,keystone-usbphy". - - #address-cells, #size-cells : should be '1' if the device has sub-nodes - with 'reg' property. - - reg : Address and length of the usb phy control register set. - -The main purpose of this PHY driver is to enable the USB PHY reference clock -gate on the Keystone SOC for both the USB2 and USB3 PHY. Otherwise it is just -an NOP PHY driver. Hence this node is referenced as both the usb2 and usb3 -phy node in the USB Glue layer driver node. - -usb_phy: usb_phy@2620738 { - compatible = "ti,keystone-usbphy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x2620738 32>; -}; diff --git a/Documentation/devicetree/bindings/phy/lantiq,ase-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/lantiq,ase-usb2-phy.yaml new file mode 100644 index 000000000000..99b5da705ca4 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/lantiq,ase-usb2-phy.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/lantiq,ase-usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq XWAY SoC RCU USB 1.1/2.0 PHY + +maintainers: + - Hauke Mehrtens <hauke@hauke-m.de> + +description: + This node has to be a sub node of the Lantiq RCU block. + +properties: + compatible: + items: + - enum: + - lantiq,ase-usb2-phy + - lantiq,danube-usb2-phy + - lantiq,xrx100-usb2-phy + - lantiq,xrx200-usb2-phy + - lantiq,xrx300-usb2-phy + + reg: + items: + - description: Offset of the USB PHY configuration register + - description: Offset of the USB Analog configuration register + + clocks: + maxItems: 1 + + clock-names: + items: + - const: phy + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + items: + - enum: [ phy, ctrl ] + - const: ctrl + + '#phy-cells': + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - '#phy-cells' + +additionalProperties: false + +examples: + - | + usb2-phy@18 { + compatible = "lantiq,xrx200-usb2-phy"; + reg = <0x18 4>, <0x38 4>; + clocks = <&pmu 1>; + clock-names = "phy"; + resets = <&reset1 4 4>, <&reset0 4 4>; + reset-names = "phy", "ctrl"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/marvell,armada-375-usb-cluster.yaml b/Documentation/devicetree/bindings/phy/marvell,armada-375-usb-cluster.yaml new file mode 100644 index 000000000000..1706c31644e1 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/marvell,armada-375-usb-cluster.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/marvell,armada-375-usb-cluster.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Armada 375 USB Cluster + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Gregory Clement <gregory.clement@bootlin.com> + +description: + Control register for the Armada 375 USB cluster, managing USB2 and USB3 features. + +properties: + compatible: + const: marvell,armada-375-usb-cluster + + reg: + maxItems: 1 + + '#phy-cells': + description: Number of PHY cells in specifier. 1 for USB2, 2 for USB3. + const: 1 + +required: + - compatible + - reg + - '#phy-cells' + +additionalProperties: false + +examples: + - | + usbcluster: usb-cluster@18400 { + compatible = "marvell,armada-375-usb-cluster"; + reg = <0x18400 0x4>; + #phy-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/phy/marvell,armada-380-comphy.yaml b/Documentation/devicetree/bindings/phy/marvell,armada-380-comphy.yaml new file mode 100644 index 000000000000..dcb4c0007832 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/marvell,armada-380-comphy.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/marvell,armada-380-comphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 38x COMPHY controller + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Gregory Clement <gregory.clement@bootlin.com> + +description: + This comphy controller can be found on Marvell Armada 38x. It provides a + number of shared PHYs used by various interfaces (network, sata, usb, + PCIe...). + +properties: + compatible: + items: + - const: marvell,armada-380-comphy + + reg: + items: + - description: COMPHY register location and length + - description: Configuration register location and length + + reg-names: + items: + - const: comphy + - const: conf + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^phy@[0-5]$': + description: A COMPHY lane + type: object + additionalProperties: false + + properties: + reg: + maximum: 1 + + '#phy-cells': + description: Input port index for the PHY lane + const: 1 + + required: + - reg + - '#phy-cells' + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + comphy: phy@18300 { + compatible = "marvell,armada-380-comphy"; + reg = <0x18300 0x100>, <0x18460 4>; + reg-names = "comphy", "conf"; + #address-cells = <1>; + #size-cells = <0>; + + cpm_comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + cpm_comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/marvell,berlin2-sata-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,berlin2-sata-phy.yaml new file mode 100644 index 000000000000..6fc9ff96e682 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/marvell,berlin2-sata-phy.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/marvell,berlin2-sata-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Berlin SATA PHY + +maintainers: + - Antoine Tenart <atenart@kernel.org> + +properties: + compatible: + enum: + - marvell,berlin2-sata-phy + - marvell,berlin2q-sata-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#phy-cells': + const: 1 + +patternProperties: + '^sata-phy@[0-1]$': + description: A SATA PHY sub-node. + type: object + additionalProperties: false + + properties: + reg: + maximum: 1 + description: PHY index number. + + required: + - reg + +required: + - compatible + - reg + - clocks + - '#address-cells' + - '#size-cells' + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/berlin2q.h> + + phy@f7e900a0 { + compatible = "marvell,berlin2q-sata-phy"; + reg = <0xf7e900a0 0x200>; + clocks = <&chip CLKID_SATA>; + #address-cells = <1>; + #size-cells = <0>; + #phy-cells = <1>; + + sata-phy@0 { + reg = <0>; + }; + + sata-phy@1 { + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/marvell,berlin2-usb-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,berlin2-usb-phy.yaml new file mode 100644 index 000000000000..b401e12a600c --- /dev/null +++ b/Documentation/devicetree/bindings/phy/marvell,berlin2-usb-phy.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/marvell,berlin2-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Berlin USB PHY + +maintainers: + - Antoine Tenart <atenart@kernel.org> + +properties: + compatible: + enum: + - marvell,berlin2-usb-phy + - marvell,berlin2cd-usb-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - "#phy-cells" + - resets + +additionalProperties: false + +examples: + - | + usb-phy@f774000 { + compatible = "marvell,berlin2-usb-phy"; + reg = <0xf774000 0x128>; + #phy-cells = <0>; + resets = <&chip 0x104 14>; + }; diff --git a/Documentation/devicetree/bindings/phy/marvell,comphy-cp110.yaml b/Documentation/devicetree/bindings/phy/marvell,comphy-cp110.yaml new file mode 100644 index 000000000000..d9501df42886 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/marvell,comphy-cp110.yaml @@ -0,0 +1,154 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/marvell,comphy-cp110.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MVEBU COMPHY Controller + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + +description: > + COMPHY controllers can be found on the following Marvell MVEBU SoCs: + + * Armada 7k/8k (on the CP110) + * Armada 3700 + + It provides a number of shared PHYs used by various interfaces (network, SATA, + USB, PCIe...). + +properties: + compatible: + enum: + - marvell,comphy-cp110 + - marvell,comphy-a3700 + + reg: + minItems: 1 + items: + - description: Generic COMPHY registers + - description: Lane 1 (PCIe/GbE) registers (Armada 3700) + - description: Lane 0 (USB3/GbE) registers (Armada 3700) + - description: Lane 2 (SATA/USB3) registers (Armada 3700) + + reg-names: + minItems: 1 + items: + - const: comphy + - const: lane1_pcie_gbe + - const: lane0_usb3_gbe + - const: lane2_sata_usb3 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + clocks: + maxItems: 3 + description: Reference clocks for CP110; MG clock, MG Core clock, AXI clock + + clock-names: + items: + - const: mg_clk + - const: mg_core_clk + - const: axi_clk + + marvell,system-controller: + description: Phandle to the Marvell system controller (CP110 only) + $ref: /schemas/types.yaml#/definitions/phandle + +patternProperties: + '^phy@[0-2]$': + description: A COMPHY lane child node + type: object + additionalProperties: false + + properties: + reg: + description: COMPHY lane number + + '#phy-cells': + const: 1 + + required: + - reg + - '#phy-cells' + +required: + - compatible + - reg + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + const: marvell,comphy-a3700 + + then: + properties: + clocks: false + clock-names: false + + required: + - reg-names + + else: + required: + - marvell,system-controller + +examples: + - | + phy@120000 { + compatible = "marvell,comphy-cp110"; + reg = <0x120000 0x6000>; + clocks = <&clk 1 5>, <&clk 1 6>, <&clk 1 18>; + clock-names = "mg_clk", "mg_core_clk", "axi_clk"; + #address-cells = <1>; + #size-cells = <0>; + marvell,system-controller = <&syscon0>; + + phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + }; + + - | + phy@18300 { + compatible = "marvell,comphy-a3700"; + reg = <0x18300 0x300>, + <0x1F000 0x400>, + <0x5C000 0x400>, + <0xe0178 0x8>; + reg-names = "comphy", + "lane1_pcie_gbe", + "lane0_usb3_gbe", + "lane2_sata_usb3"; + #address-cells = <1>; + #size-cells = <0>; + + comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp2-usb-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp2-usb-phy.yaml new file mode 100644 index 000000000000..af1ae2406f65 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/marvell,mmp2-usb-phy.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/marvell,mmp2-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP2/PXA USB PHY + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +properties: + compatible: + enum: + - marvell,mmp2-usb-phy + - marvell,pxa910-usb-phy + - marvell,pxa168-usb-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + +required: + - compatible + - "#phy-cells" + +additionalProperties: false + +examples: + - | + usbphy@d4207000 { + compatible = "marvell,mmp2-usb-phy"; + reg = <0xd4207000 0x40>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/marvell,mvebu-sata-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mvebu-sata-phy.yaml new file mode 100644 index 000000000000..81e942428911 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/marvell,mvebu-sata-phy.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/marvell,mvebu-sata-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MVEBU SATA PHY + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Gregory Clement <gregory.clement@bootlin.com> + +properties: + compatible: + const: marvell,mvebu-sata-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: sata + + '#phy-cells': + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - '#phy-cells' + +additionalProperties: false + +examples: + - | + sata-phy@84000 { + compatible = "marvell,mvebu-sata-phy"; + reg = <0x84000 0x0334>; + clocks = <&gate_clk 15>; + clock-names = "sata"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml index 3c28ec50f097..286a4fcc977d 100644 --- a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml +++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml @@ -72,11 +72,6 @@ allOf: contains: const: fsl,imx8qxp-mipi-dphy then: - properties: - assigned-clocks: false - assigned-clock-parents: false - assigned-clock-rates: false - required: - fsl,syscon diff --git a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml new file mode 100644 index 000000000000..0febd04a61f4 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/motorola,cpcap-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Motorola CPCAP PMIC USB PHY + +maintainers: + - Tony Lindgren <tony@atomide.com> + +properties: + compatible: + enum: + - motorola,cpcap-usb-phy + - motorola,mapphone-cpcap-usb-phy + + '#phy-cells': + const: 0 + + interrupts: + description: CPCAP PMIC interrupts used by the USB PHY + items: + - description: id_ground interrupt + - description: id_float interrupt + - description: se0conn interrupt + - description: vbusvld interrupt + - description: sessvld interrupt + - description: sessend interrupt + - description: se1 interrupt + - description: dm interrupt + - description: dp interrupt + + interrupt-names: + description: Interrupt names + items: + - const: id_ground + - const: id_float + - const: se0conn + - const: vbusvld + - const: sessvld + - const: sessend + - const: se1 + - const: dm + - const: dp + + io-channels: + description: IIO ADC channels used by the USB PHY + items: + - description: vbus channel + - description: id channel + + io-channel-names: + items: + - const: vbus + - const: id + + vusb-supply: true + + pinctrl-names: + items: + - const: default + - const: ulpi + - const: utmi + - const: uart + + mode-gpios: + description: Optional GPIOs for configuring alternate modes + items: + - description: "mode selection GPIO #0" + - description: "mode selection GPIO #1" + +required: + - compatible + - '#phy-cells' + - interrupts-extended + - interrupt-names + - io-channels + - io-channel-names + - vusb-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + phy { + compatible = "motorola,mapphone-cpcap-usb-phy"; + #phy-cells = <0>; + interrupts-extended = < + &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0 + &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0 + &cpcap 48 1 + >; + interrupt-names = "id_ground", "id_float", "se0conn", "vbusvld", + "sessvld", "sessend", "se1", "dm", "dp"; + io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>; + io-channel-names = "vbus", "id"; + vusb-supply = <&vusb>; + pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>; + pinctrl-1 = <&usb_ulpi_pins>; + pinctrl-2 = <&usb_utmi_pins>; + pinctrl-3 = <&uart3_pins>; + pinctrl-names = "default", "ulpi", "utmi", "uart"; + mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, <&gpio1 0 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/phy/motorola,mapphone-mdm6600.yaml b/Documentation/devicetree/bindings/phy/motorola,mapphone-mdm6600.yaml new file mode 100644 index 000000000000..cb6544b3478d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/motorola,mapphone-mdm6600.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/motorola,mapphone-mdm6600.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Motorola Mapphone MDM6600 USB PHY + +maintainers: + - Tony Lindgren <tony@atomide.com> + +properties: + compatible: + items: + - const: motorola,mapphone-mdm6600 + + enable-gpios: + description: GPIO to enable the USB PHY + maxItems: 1 + + power-gpios: + description: GPIO to power on the device + maxItems: 1 + + reset-gpios: + description: GPIO to reset the device + maxItems: 1 + + motorola,mode-gpios: + description: Two GPIOs to configure MDM6600 USB start-up mode for normal mode versus USB flashing mode + items: + - description: normal mode select GPIO + - description: USB flashing mode select GPIO + + motorola,cmd-gpios: + description: Three GPIOs to control the power state of the MDM6600 + items: + - description: power state control GPIO 0 + - description: power state control GPIO 1 + - description: power state control GPIO 2 + + motorola,status-gpios: + description: Three GPIOs to read the power state of the MDM6600 + items: + - description: power state read GPIO 0 + - description: power state read GPIO 1 + - description: power state read GPIO 2 + + '#phy-cells': + const: 0 + +required: + - compatible + - enable-gpios + - power-gpios + - reset-gpios + - motorola,mode-gpios + - motorola,cmd-gpios + - motorola,status-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + usb-phy { + compatible = "motorola,mapphone-mdm6600"; + enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; + motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, + <&gpio5 21 GPIO_ACTIVE_HIGH>; + motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, + <&gpio4 8 GPIO_ACTIVE_HIGH>, + <&gpio5 14 GPIO_ACTIVE_HIGH>; + motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, + <&gpio2 21 GPIO_ACTIVE_HIGH>, + <&gpio2 23 GPIO_ACTIVE_HIGH>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt b/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt deleted file mode 100644 index 8b5a7a28a35b..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt +++ /dev/null @@ -1,48 +0,0 @@ -mvebu armada 38x comphy driver ------------------------------- - -This comphy controller can be found on Marvell Armada 38x. It provides a -number of shared PHYs used by various interfaces (network, sata, usb, -PCIe...). - -Required properties: - -- compatible: should be "marvell,armada-380-comphy" -- reg: should contain the comphy register location and length. -- #address-cells: should be 1. -- #size-cells: should be 0. - -Optional properties: - -- reg-names: must be "comphy" as the first name, and "conf". -- reg: must contain the comphy register location and length as the first - pair, followed by an optional configuration register address and - length pair. - -A sub-node is required for each comphy lane provided by the comphy. - -Required properties (child nodes): - -- reg: comphy lane number. -- #phy-cells : from the generic phy bindings, must be 1. Defines the - input port to use for a given comphy lane. - -Example: - - comphy: phy@18300 { - compatible = "marvell,armada-380-comphy"; - reg-names = "comphy", "conf"; - reg = <0x18300 0x100>, <0x18460 4>; - #address-cells = <1>; - #size-cells = <0>; - - cpm_comphy0: phy@0 { - reg = <0>; - #phy-cells = <1>; - }; - - cpm_comphy1: phy@1 { - reg = <1>; - #phy-cells = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt b/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt deleted file mode 100644 index c3a29c5feea3..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Atheros AR71XX/9XXX USB PHY - -Required properties: -- compatible: "qca,ar7100-usb-phy" -- #phys-cells: should be 0 -- reset-names: "phy"[, "suspend-override"] -- resets: references to the reset controllers - -Example: - - usb-phy { - compatible = "qca,ar7100-usb-phy"; - - reset-names = "phy", "suspend-override"; - resets = <&rst 4>, <&rst 3>; - - #phy-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt b/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt deleted file mode 100644 index 2eb9b2b69037..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt +++ /dev/null @@ -1,40 +0,0 @@ -Motorola CPCAP PMIC USB PHY binding - -Required properties: -compatible: Shall be either "motorola,cpcap-usb-phy" or - "motorola,mapphone-cpcap-usb-phy" -#phy-cells: Shall be 0 -interrupts: CPCAP PMIC interrupts used by the USB PHY -interrupt-names: Interrupt names -io-channels: IIO ADC channels used by the USB PHY -io-channel-names: IIO ADC channel names -vusb-supply: Regulator for the PHY - -Optional properties: -pinctrl: Optional alternate pin modes for the PHY -pinctrl-names: Names for optional pin modes -mode-gpios: Optional GPIOs for configuring alternate modes - -Example: -cpcap_usb2_phy: phy { - compatible = "motorola,mapphone-cpcap-usb-phy"; - pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>; - pinctrl-1 = <&usb_ulpi_pins>; - pinctrl-2 = <&usb_utmi_pins>; - pinctrl-3 = <&uart3_pins>; - pinctrl-names = "default", "ulpi", "utmi", "uart"; - #phy-cells = <0>; - interrupts-extended = < - &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0 - &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0 - &cpcap 48 1 - >; - interrupt-names = - "id_ground", "id_float", "se0conn", "vbusvld", - "sessvld", "sessend", "se1", "dm", "dp"; - mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH - &gpio1 0 GPIO_ACTIVE_HIGH>; - io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>; - io-channel-names = "vbus", "id"; - vusb-supply = <&vusb>; -}; diff --git a/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt deleted file mode 100644 index c26478be391b..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt +++ /dev/null @@ -1,40 +0,0 @@ -TI DA8xx/OMAP-L1xx/AM18xx USB PHY - -Required properties: - - compatible: must be "ti,da830-usb-phy". - - #phy-cells: must be 1. - -This device controls the PHY for both the USB 1.1 OHCI and USB 2.0 OTG -controllers on DA8xx SoCs. Consumers of this device should use index 0 for -the USB 2.0 phy device and index 1 for the USB 1.1 phy device. - -It also requires a "syscon" node with compatible = "ti,da830-cfgchip", "syscon" -to access the CFGCHIP2 register. - -Example: - - cfgchip: cfgchip@1417c { - compatible = "ti,da830-cfgchip", "syscon"; - reg = <0x1417c 0x14>; - }; - - usb_phy: usb-phy { - compatible = "ti,da830-usb-phy"; - #phy-cells = <1>; - }; - - usb20: usb@200000 { - compatible = "ti,da830-musb"; - reg = <0x200000 0x1000>; - interrupts = <58>; - phys = <&usb_phy 0>; - phy-names = "usb-phy"; - }; - - usb11: usb@225000 { - compatible = "ti,da830-ohci"; - reg = <0x225000 0x1000>; - interrupts = <59>; - phys = <&usb_phy 1>; - phy-names = "usb-phy"; - }; diff --git a/Documentation/devicetree/bindings/phy/phy-hi6220-usb.txt b/Documentation/devicetree/bindings/phy/phy-hi6220-usb.txt deleted file mode 100644 index f17a56e2152f..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-hi6220-usb.txt +++ /dev/null @@ -1,16 +0,0 @@ -Hisilicon hi6220 usb PHY ------------------------ - -Required properties: -- compatible: should be "hisilicon,hi6220-usb-phy" -- #phy-cells: must be 0 -- hisilicon,peripheral-syscon: phandle of syscon used to control phy. -Refer to phy/phy-bindings.txt for the generic PHY binding properties - -Example: - usb_phy: usbphy { - compatible = "hisilicon,hi6220-usb-phy"; - #phy-cells = <0>; - phy-supply = <&fixed_5v_hub>; - hisilicon,peripheral-syscon = <&sys_ctrl>; - }; diff --git a/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt deleted file mode 100644 index 104953e849e7..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt +++ /dev/null @@ -1,71 +0,0 @@ -Device tree bindings for HiSilicon INNO USB2 PHY - -Required properties: -- compatible: Should be one of the following strings: - "hisilicon,inno-usb2-phy", - "hisilicon,hi3798cv200-usb2-phy". -- reg: Should be the address space for PHY configuration register in peripheral - controller, e.g. PERI_USB0 for USB 2.0 PHY01 on Hi3798CV200 SoC. -- clocks: The phandle and clock specifier pair for INNO USB2 PHY device - reference clock. -- resets: The phandle and reset specifier pair for INNO USB2 PHY device reset - signal. -- #address-cells: Must be 1. -- #size-cells: Must be 0. - -The INNO USB2 PHY device should be a child node of peripheral controller that -contains the PHY configuration register, and each device supports up to 2 PHY -ports which are represented as child nodes of INNO USB2 PHY device. - -Required properties for PHY port node: -- reg: The PHY port instance number. -- #phy-cells: Defined by generic PHY bindings. Must be 0. -- resets: The phandle and reset specifier pair for PHY port reset signal. - -Refer to phy/phy-bindings.txt for the generic PHY binding properties - -Example: - -perictrl: peripheral-controller@8a20000 { - compatible = "hisilicon,hi3798cv200-perictrl", "simple-mfd"; - reg = <0x8a20000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x8a20000 0x1000>; - - usb2_phy1: usb2-phy@120 { - compatible = "hisilicon,hi3798cv200-usb2-phy"; - reg = <0x120 0x4>; - clocks = <&crg HISTB_USB2_PHY1_REF_CLK>; - resets = <&crg 0xbc 4>; - #address-cells = <1>; - #size-cells = <0>; - - usb2_phy1_port0: phy@0 { - reg = <0>; - #phy-cells = <0>; - resets = <&crg 0xbc 8>; - }; - - usb2_phy1_port1: phy@1 { - reg = <1>; - #phy-cells = <0>; - resets = <&crg 0xbc 9>; - }; - }; - - usb2_phy2: usb2-phy@124 { - compatible = "hisilicon,hi3798cv200-usb2-phy"; - reg = <0x124 0x4>; - clocks = <&crg HISTB_USB2_PHY2_REF_CLK>; - resets = <&crg 0xbc 6>; - #address-cells = <1>; - #size-cells = <0>; - - usb2_phy2_port0: phy@0 { - reg = <0>; - #phy-cells = <0>; - resets = <&crg 0xbc 10>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/phy/phy-lantiq-rcu-usb2.txt b/Documentation/devicetree/bindings/phy/phy-lantiq-rcu-usb2.txt deleted file mode 100644 index 643948b6b576..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-lantiq-rcu-usb2.txt +++ /dev/null @@ -1,40 +0,0 @@ -Lantiq XWAY SoC RCU USB 1.1/2.0 PHY binding -=========================================== - -This binding describes the USB PHY hardware provided by the RCU module on the -Lantiq XWAY SoCs. - -This node has to be a sub node of the Lantiq RCU block. - -------------------------------------------------------------------------------- -Required properties (controller (parent) node): -- compatible : Should be one of - "lantiq,ase-usb2-phy" - "lantiq,danube-usb2-phy" - "lantiq,xrx100-usb2-phy" - "lantiq,xrx200-usb2-phy" - "lantiq,xrx300-usb2-phy" -- reg : Defines the following sets of registers in the parent - syscon device - - Offset of the USB PHY configuration register - - Offset of the USB Analog configuration - register (only for xrx200 and xrx200) -- clocks : References to the (PMU) "phy" clk gate. -- clock-names : Must be "phy" -- resets : References to the RCU USB configuration reset bits. -- reset-names : Must be one of the following: - "phy" (optional) - "ctrl" (shared) - -------------------------------------------------------------------------------- -Example for the USB PHYs on an xRX200 SoC: - usb_phy0: usb2-phy@18 { - compatible = "lantiq,xrx200-usb2-phy"; - reg = <0x18 4>, <0x38 4>; - - clocks = <&pmu PMU_GATE_USB0_PHY>; - clock-names = "phy"; - resets = <&reset1 4 4>, <&reset0 4 4>; - reset-names = "phy", "ctrl"; - #phy-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/phy/phy-mapphone-mdm6600.txt b/Documentation/devicetree/bindings/phy/phy-mapphone-mdm6600.txt deleted file mode 100644 index 29427d4f047a..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-mapphone-mdm6600.txt +++ /dev/null @@ -1,29 +0,0 @@ -Device tree binding documentation for Motorola Mapphone MDM6600 USB PHY - -Required properties: -- compatible Must be "motorola,mapphone-mdm6600" -- enable-gpios GPIO to enable the USB PHY -- power-gpios GPIO to power on the device -- reset-gpios GPIO to reset the device -- motorola,mode-gpios Two GPIOs to configure MDM6600 USB start-up mode for - normal mode versus USB flashing mode -- motorola,cmd-gpios Three GPIOs to control the power state of the MDM6600 -- motorola,status-gpios Three GPIOs to read the power state of the MDM6600 - -Example: - -usb-phy { - compatible = "motorola,mapphone-mdm6600"; - enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; - power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; - motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, - <&gpio5 21 GPIO_ACTIVE_HIGH>; - motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, - <&gpio4 8 GPIO_ACTIVE_HIGH>, - <&gpio5 14 GPIO_ACTIVE_HIGH>; - motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, - <&gpio2 21 GPIO_ACTIVE_HIGH>, - <&gpio2 23 GPIO_ACTIVE_HIGH>; - #phy-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt deleted file mode 100644 index 5ffd0f55d010..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt +++ /dev/null @@ -1,94 +0,0 @@ -MVEBU comphy drivers --------------------- - -COMPHY controllers can be found on the following Marvell MVEBU SoCs: -* Armada 7k/8k (on the CP110) -* Armada 3700 -It provides a number of shared PHYs used by various interfaces (network, SATA, -USB, PCIe...). - -Required properties: - -- compatible: should be one of: - * "marvell,comphy-cp110" for Armada 7k/8k - * "marvell,comphy-a3700" for Armada 3700 -- reg: should contain the COMPHY register(s) location(s) and length(s). - * 1 entry for Armada 7k/8k - * 4 entries for Armada 3700 along with the corresponding reg-names - properties, memory areas are: - * Generic COMPHY registers - * Lane 1 (PCIe/GbE) - * Lane 0 (USB3/GbE) - * Lane 2 (SATA/USB3) -- marvell,system-controller: should contain a phandle to the system - controller node (only for Armada 7k/8k) -- #address-cells: should be 1. -- #size-cells: should be 0. - -Optional properlties: - -- clocks: pointers to the reference clocks for this device (CP110 only), - consequently: MG clock, MG Core clock, AXI clock. -- clock-names: names of used clocks for CP110 only, must be : - "mg_clk", "mg_core_clk" and "axi_clk". - -A sub-node is required for each comphy lane provided by the comphy. - -Required properties (child nodes): - -- reg: COMPHY lane number. -- #phy-cells : from the generic PHY bindings, must be 1. Defines the - input port to use for a given comphy lane. - -Examples: - - CP11X_LABEL(comphy): phy@120000 { - compatible = "marvell,comphy-cp110"; - reg = <0x120000 0x6000>; - marvell,system-controller = <&CP11X_LABEL(syscon0)>; - clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, - <&CP11X_LABEL(clk) 1 18>; - clock-names = "mg_clk", "mg_core_clk", "axi_clk"; - #address-cells = <1>; - #size-cells = <0>; - - CP11X_LABEL(comphy0): phy@0 { - reg = <0>; - #phy-cells = <1>; - }; - - CP11X_LABEL(comphy1): phy@1 { - reg = <1>; - #phy-cells = <1>; - }; - }; - - comphy: phy@18300 { - compatible = "marvell,comphy-a3700"; - reg = <0x18300 0x300>, - <0x1F000 0x400>, - <0x5C000 0x400>, - <0xe0178 0x8>; - reg-names = "comphy", - "lane1_pcie_gbe", - "lane0_usb3_gbe", - "lane2_sata_usb3"; - #address-cells = <1>; - #size-cells = <0>; - - - comphy0: phy@0 { - reg = <0>; - #phy-cells = <1>; - }; - - comphy1: phy@1 { - reg = <1>; - #phy-cells = <1>; - }; - - comphy2: phy@2 { - reg = <2>; - #phy-cells = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu.txt b/Documentation/devicetree/bindings/phy/phy-mvebu.txt deleted file mode 100644 index 64afdd13d91d..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-mvebu.txt +++ /dev/null @@ -1,42 +0,0 @@ -* Marvell MVEBU SATA PHY - -Power control for the SATA phy found on Marvell MVEBU SoCs. - -This document extends the binding described in phy-bindings.txt - -Required properties : - - - reg : Offset and length of the register set for the SATA device - - compatible : Should be "marvell,mvebu-sata-phy" - - clocks : phandle of clock and specifier that supplies the device - - clock-names : Should be "sata" - -Example: - sata-phy@84000 { - compatible = "marvell,mvebu-sata-phy"; - reg = <0x84000 0x0334>; - clocks = <&gate_clk 15>; - clock-names = "sata"; - #phy-cells = <0>; - }; - -Armada 375 USB cluster ----------------------- - -Armada 375 comes with an USB2 host and device controller and an USB3 -controller. The USB cluster control register allows to manage common -features of both USB controllers. - -Required properties: - -- compatible: "marvell,armada-375-usb-cluster" -- reg: Should contain usb cluster register location and length. -- #phy-cells : from the generic phy bindings, must be 1. Possible -values are 1 (USB2), 2 (USB3). - -Example: - usbcluster: usb-cluster@18400 { - compatible = "marvell,armada-375-usb-cluster"; - reg = <0x18400 0x4>; - #phy-cells = <1> - }; diff --git a/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt b/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt deleted file mode 100644 index d80e36a77ec5..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt +++ /dev/null @@ -1,18 +0,0 @@ -Marvell PXA USB PHY -------------------- - -Required properties: -- compatible: one of: "marvell,mmp2-usb-phy", "marvell,pxa910-usb-phy", - "marvell,pxa168-usb-phy", -- #phy-cells: must be 0 - -Example: - usb-phy: usbphy@d4207000 { - compatible = "marvell,mmp2-usb-phy"; - reg = <0xd4207000 0x40>; - #phy-cells = <0>; - status = "okay"; - }; - -This document explains the device tree binding. For general -information about PHY subsystem refer to Documentation/driver-api/phy/phy.rst diff --git a/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt b/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt deleted file mode 100644 index c7970c07ee32..000000000000 --- a/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt +++ /dev/null @@ -1,29 +0,0 @@ -IMG Pistachio USB PHY -===================== - -Required properties: --------------------- - - compatible: Must be "img,pistachio-usb-phy". - - #phy-cells: Must be 0. See ./phy-bindings.txt for details. - - clocks: Must contain an entry for each entry in clock-names. - See ../clock/clock-bindings.txt for details. - - clock-names: Must include "usb_phy". - - img,cr-top: Must contain a phandle to the CR_TOP syscon node. - - img,refclk: Indicates the reference clock source for the USB PHY. - See <dt-bindings/phy/phy-pistachio-usb.h> for a list of valid values. - -Optional properties: --------------------- - - phy-supply: USB VBUS supply. Must supply 5.0V. - -Example: --------- -usb_phy: usb-phy { - compatible = "img,pistachio-usb-phy"; - clocks = <&clk_core CLK_USB_PHY>; - clock-names = "usb_phy"; - phy-supply = <&usb_vbus>; - img,refclk = <REFCLK_CLK_CORE>; - img,cr-top = <&cr_top>; - #phy-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/phy/qca,ar7100-usb-phy.yaml b/Documentation/devicetree/bindings/phy/qca,ar7100-usb-phy.yaml new file mode 100644 index 000000000000..029665530829 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qca,ar7100-usb-phy.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qca,ar7100-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atheros AR71XX/9XXX USB PHY + +maintainers: + - Alban Bedel <albeu@free.fr> + +properties: + compatible: + items: + - const: qca,ar7100-usb-phy + + reset-names: + description: Names of reset lines in order. + minItems: 1 + items: + - const: phy + - const: suspend-override + + resets: + description: References to the reset controllers. + minItems: 1 + items: + - description: Reset controller for phy + - description: Reset controller for suspend-override + + '#phy-cells': + const: 0 + +required: + - compatible + - reset-names + - resets + - '#phy-cells' + +additionalProperties: false + +examples: + - | + usb-phy { + compatible = "qca,ar7100-usb-phy"; + reset-names = "phy", "suspend-override"; + resets = <&rst 4>, <&rst 3>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,m31-eusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,m31-eusb2-phy.yaml new file mode 100644 index 000000000000..c84c62d0e8cb --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,m31-eusb2-phy.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,m31-eusb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm M31 eUSB2 phy + +maintainers: + - Wesley Cheng <quic_wcheng@quicinc.com> + +description: + M31 based eUSB2 controller, which supports LS/FS/HS usb connectivity + on Qualcomm chipsets. It is paired with a eUSB2 repeater. + +properties: + compatible: + items: + - enum: + - qcom,sm8750-m31-eusb2-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: reference clock + + clock-names: + items: + - const: ref + + resets: + maxItems: 1 + + phys: + maxItems: 1 + description: + Phandle to eUSB2 repeater + + vdd-supply: + description: + Phandle to 0.88V regulator supply to PHY digital circuit. + + vdda12-supply: + description: + Phandle to 1.2V regulator supply to PHY refclk pll block. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - vdd-supply + - vdda12-supply + +additionalProperties: false + +examples: + - | + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8750-m31-eusb2-phy"; + reg = <0x88e3000 0x29c>; + + clocks = <&tcsrcc_usb2_clkref_en>; + clock-names = "ref"; + + resets = <&gcc_qusb2phy_prim_bcr>; + + #phy-cells = <0>; + + vdd-supply = <&vreg_l2d_0p88>; + vdda12-supply = <&vreg_l3g_1p2>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml index 2c6c9296e4c0..a1ae8c7988c8 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml @@ -145,6 +145,7 @@ allOf: compatible: contains: enum: + - qcom,qcs615-qmp-gen3x1-pcie-phy - qcom,sar2130p-qmp-gen3x2-pcie-phy - qcom,sc8180x-qmp-pcie-phy - qcom,sdm845-qhp-pcie-phy @@ -175,7 +176,6 @@ allOf: compatible: contains: enum: - - qcom,qcs615-qmp-gen3x1-pcie-phy - qcom,sc8280xp-qmp-gen3x1-pcie-phy - qcom,sc8280xp-qmp-gen3x2-pcie-phy - qcom,sc8280xp-qmp-gen3x4-pcie-phy diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml index 358a6736a951..38ce04c35d94 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml @@ -29,6 +29,7 @@ properties: - qcom,sm8450-qmp-usb3-dp-phy - qcom,sm8550-qmp-usb3-dp-phy - qcom,sm8650-qmp-usb3-dp-phy + - qcom,sm8750-qmp-usb3-dp-phy - qcom,x1e80100-qmp-usb3-dp-phy reg: @@ -133,6 +134,7 @@ allOf: - qcom,sm6350-qmp-usb3-dp-phy - qcom,sm8550-qmp-usb3-dp-phy - qcom,sm8650-qmp-usb3-dp-phy + - qcom,sm8750-qmp-usb3-dp-phy - qcom,x1e80100-qmp-usb3-dp-phy then: required: diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml index 142b3c8839d6..854f70af0a6c 100644 --- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml @@ -17,6 +17,7 @@ properties: oneOf: - items: - enum: + - qcom,milos-snps-eusb2-phy - qcom,sar2130p-snps-eusb2-phy - qcom,sdx75-snps-eusb2-phy - qcom,sm8650-snps-eusb2-phy diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml index d16a543a7848..27f064a71c9f 100644 --- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml @@ -39,21 +39,18 @@ properties: description: High-Speed disconnect threshold minimum: 0 maximum: 7 - default: 0 qcom,tune-usb2-amplitude: $ref: /schemas/types.yaml#/definitions/uint8 description: High-Speed transmit amplitude minimum: 0 maximum: 15 - default: 8 qcom,tune-usb2-preem: $ref: /schemas/types.yaml#/definitions/uint8 description: High-Speed TX pre-emphasis tuning minimum: 0 maximum: 7 - default: 5 required: - compatible diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml index 2822dce8d9f4..f45c5f039ae8 100644 --- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml @@ -40,6 +40,10 @@ properties: - renesas,usb2-phy-r9a07g054 # RZ/V2L - const: renesas,rzg2l-usb2-phy + - items: + - const: renesas,usb2-phy-r9a09g056 # RZ/V2N + - const: renesas,usb2-phy-r9a09g057 + reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml index b2250e4a6b1b..16967ef8e9ec 100644 --- a/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml +++ b/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml @@ -29,6 +29,7 @@ properties: - samsung,s5pv210-mipi-video-phy - samsung,exynos5420-mipi-video-phy - samsung,exynos5433-mipi-video-phy + - samsung,exynos7870-mipi-video-phy "#phy-cells": const: 1 @@ -46,19 +47,20 @@ properties: deprecated: true description: Phandle to PMU system controller interface, valid for - samsung,exynos5433-mipi-video-phy (if not a child of PMU). + samsung,exynos5433-mipi-video-phy and samsung,exynos7870-mipi-video-phy + (if not a child of PMU). samsung,disp-sysreg: $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to DISP system controller interface, valid for - samsung,exynos5433-mipi-video-phy. + samsung,exynos5433-mipi-video-phy and samsung,exynos7870-mipi-video-phy. samsung,cam0-sysreg: $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to CAM0 system controller interface, valid for - samsung,exynos5433-mipi-video-phy. + samsung,exynos5433-mipi-video-phy and samsung,exynos7870-mipi-video-phy. samsung,cam1-sysreg: $ref: /schemas/types.yaml#/definitions/phandle @@ -84,7 +86,13 @@ allOf: samsung,disp-sysreg: false samsung,cam0-sysreg: false samsung,cam1-sysreg: false - else: + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-mipi-video-phy + then: properties: syscon: false required: @@ -92,6 +100,19 @@ allOf: - samsung,cam0-sysreg - samsung,cam1-sysreg + - if: + properties: + compatible: + contains: + const: samsung,exynos7870-mipi-video-phy + then: + properties: + syscon: false + samsung,cam1-sysreg: false + required: + - samsung,disp-sysreg + - samsung,cam0-sysreg + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml index cc60d2f6f70e..e906403208c0 100644 --- a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml +++ b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml @@ -33,6 +33,7 @@ properties: - samsung,exynos7-usbdrd-phy - samsung,exynos7870-usbdrd-phy - samsung,exynos850-usbdrd-phy + - samsung,exynos990-usbdrd-phy clocks: minItems: 1 @@ -217,6 +218,7 @@ allOf: - samsung,exynos5420-usbdrd-phy - samsung,exynos7870-usbdrd-phy - samsung,exynos850-usbdrd-phy + - samsung,exynos990-usbdrd-phy then: properties: clocks: diff --git a/Documentation/devicetree/bindings/phy/st,spear1310-miphy.yaml b/Documentation/devicetree/bindings/phy/st,spear1310-miphy.yaml new file mode 100644 index 000000000000..32f81615ddad --- /dev/null +++ b/Documentation/devicetree/bindings/phy/st,spear1310-miphy.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/st,spear1310-miphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST SPEAr miphy + +maintainers: + - Pratyush Anand <pratyush.anand@gmail.com> + +description: + ST Microelectronics SPEAr miphy is a phy controller supporting PCIe and SATA. + +properties: + compatible: + enum: + - st,spear1310-miphy + - st,spear1340-miphy + + reg: + maxItems: 1 + + misc: + description: Phandle for the syscon node to access misc registers. + $ref: /schemas/types.yaml#/definitions/phandle + + '#phy-cells': + description: > + Cell[0] indicates interface type: 0 = SATA, 1 = PCIe. + const: 1 + + phy-id: + description: Instance id of the phy. Required when multiple PHYs are present. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - misc + - '#phy-cells' + +additionalProperties: false + +examples: + - | + miphy@1000 { + compatible = "st,spear1310-miphy"; + reg = <0x1000 0x100>; + misc = <&syscon>; + #phy-cells = <1>; + phy-id = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/st-spear-miphy.txt b/Documentation/devicetree/bindings/phy/st-spear-miphy.txt deleted file mode 100644 index 2a6bfdcc09b3..000000000000 --- a/Documentation/devicetree/bindings/phy/st-spear-miphy.txt +++ /dev/null @@ -1,15 +0,0 @@ -ST SPEAr miphy DT details -========================= - -ST Microelectronics SPEAr miphy is a phy controller supporting PCIe and SATA. - -Required properties: -- compatible : should be "st,spear1310-miphy" or "st,spear1340-miphy" -- reg : offset and length of the PHY register set. -- misc: phandle for the syscon node to access misc registers -- #phy-cells : from the generic PHY bindings, must be 1. - - cell[1]: 0 if phy used for SATA, 1 for PCIe. - -Optional properties: -- phy-id: Instance id of the phy. Only required when there are multiple phys - present on a implementation. diff --git a/Documentation/devicetree/bindings/phy/ti,da830-usb-phy.yaml b/Documentation/devicetree/bindings/phy/ti,da830-usb-phy.yaml new file mode 100644 index 000000000000..e168cbce8fd1 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti,da830-usb-phy.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/ti,da830-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI DA8xx/OMAP-L1xx/AM18xx USB PHY + +maintainers: + - David Lechner <david@lechnology.com> + +description: > + This device controls the PHY for both the USB 1.1 OHCI and USB 2.0 OTG + controllers on DA8xx SoCs. + + It also requires a "syscon" node with compatible = "ti,da830-cfgchip", "syscon" + to access the CFGCHIP2 register. + +properties: + compatible: + items: + - const: ti,da830-usb-phy + + '#phy-cells': + const: 1 + description: + Consumers of this device should use index 0 for the USB 2.0 phy device and + index 1 for the USB 1.1 phy device. + + clocks: + maxItems: 2 + + clock-names: + items: + - const: usb0_clk48 + - const: usb1_clk48 + +required: + - compatible + - '#phy-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + usb-phy { + compatible = "ti,da830-usb-phy"; + #phy-cells = <1>; + clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>; + clock-names = "usb0_clk48", "usb1_clk48"; + }; diff --git a/Documentation/devicetree/bindings/phy/ti,dm8168-usb-phy.yaml b/Documentation/devicetree/bindings/phy/ti,dm8168-usb-phy.yaml new file mode 100644 index 000000000000..673dc1d37dcb --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti,dm8168-usb-phy.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/ti,dm8168-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI DM8168 USB PHY + +maintainers: + - Tony Lindgren <tony@atomide.com> + +properties: + compatible: + const: ti,dm8168-usb-phy + + reg: + maxItems: 1 + + reg-names: + items: + - const: phy + + clocks: + maxItems: 1 + + clock-names: + items: + - const: refclk + + '#phy-cells': + const: 0 + + syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle for the syscon node to access misc registers. + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - '#phy-cells' + - syscon + +additionalProperties: false + +examples: + - | + usb-phy@20 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x20 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; + }; diff --git a/Documentation/devicetree/bindings/phy/ti,keystone-usbphy.yaml b/Documentation/devicetree/bindings/phy/ti,keystone-usbphy.yaml new file mode 100644 index 000000000000..08dc18e7feea --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti,keystone-usbphy.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/ti,keystone-usbphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI Keystone USB PHY + +maintainers: + - Nishanth Menon <nm@ti.com> + - Santosh Shilimkar <ssantosh@kernel.org> + +description: + The main purpose of this PHY driver is to enable the USB PHY reference clock + gate on the Keystone SOC for both the USB2 and USB3 PHY. Otherwise it is just + an NOP PHY driver. Hence this node is referenced as both the usb2 and usb3 + phy node in the USB Glue layer driver node. + +properties: + compatible: + const: ti,keystone-usbphy + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + usb-phy@2620738 { + compatible = "ti,keystone-usbphy"; + reg = <0x2620738 32>; + }; diff --git a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml index 8dac5eba61b4..dfd084ed9024 100644 --- a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml @@ -32,6 +32,7 @@ properties: - qcom,ipq8064-dwc3 - qcom,ipq8074-dwc3 - qcom,ipq9574-dwc3 + - qcom,milos-dwc3 - qcom,msm8953-dwc3 - qcom,msm8994-dwc3 - qcom,msm8996-dwc3 @@ -338,6 +339,7 @@ allOf: compatible: contains: enum: + - qcom,milos-dwc3 - qcom,qcm2290-dwc3 - qcom,qcs615-dwc3 - qcom,sar2130p-dwc3 @@ -453,6 +455,7 @@ allOf: compatible: contains: enum: + - qcom,milos-dwc3 - qcom,x1e80100-dwc3 then: properties: diff --git a/MAINTAINERS b/MAINTAINERS index d5a47d4fe9ad..6a04e5e85509 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3918,7 +3918,7 @@ M: Alban Bedel <albeu@free.fr> S: Maintained W: https://github.com/AlbanBedel/linux T: git https://github.com/AlbanBedel/linux.git -F: Documentation/devicetree/bindings/phy/phy-ath79-usb.txt +F: Documentation/devicetree/bindings/phy/qca,ar7100-usb-phy.yaml F: drivers/phy/qualcomm/phy-ath79-usb.c ATHEROS ATH GENERIC UTILITIES @@ -14700,7 +14700,7 @@ MARVELL ARMADA 3700 PHY DRIVERS M: Miquel Raynal <miquel.raynal@bootlin.com> S: Maintained F: Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml -F: Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt +F: Documentation/devicetree/bindings/phy/marvell,comphy-cp110.yaml F: drivers/phy/marvell/phy-mvebu-a3700-comphy.c F: drivers/phy/marvell/phy-mvebu-a3700-utmi.c diff --git a/drivers/phy/broadcom/phy-bcm-ns2-pcie.c b/drivers/phy/broadcom/phy-bcm-ns2-pcie.c index 2eaa41f8fc70..67a6ae5ecba0 100644 --- a/drivers/phy/broadcom/phy-bcm-ns2-pcie.c +++ b/drivers/phy/broadcom/phy-bcm-ns2-pcie.c @@ -61,8 +61,6 @@ static int ns2_pci_phy_probe(struct mdio_device *mdiodev) return PTR_ERR(provider); } - dev_info(dev, "%s PHY registered\n", dev_name(dev)); - return 0; } diff --git a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c index 36ad02c33ac5..8473fa574529 100644 --- a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c +++ b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c @@ -395,7 +395,6 @@ static int ns2_drd_phy_probe(struct platform_device *pdev) platform_set_drvdata(pdev, driver); - dev_info(dev, "Registered NS2 DRD Phy device\n"); queue_delayed_work(system_power_efficient_wq, &driver->wq_extcon, driver->debounce_jiffies); diff --git a/drivers/phy/broadcom/phy-bcm-sr-pcie.c b/drivers/phy/broadcom/phy-bcm-sr-pcie.c index ff9b3862bf7a..706e1d83b4ce 100644 --- a/drivers/phy/broadcom/phy-bcm-sr-pcie.c +++ b/drivers/phy/broadcom/phy-bcm-sr-pcie.c @@ -277,8 +277,6 @@ static int sr_pcie_phy_probe(struct platform_device *pdev) return PTR_ERR(provider); } - dev_info(dev, "Stingray PCIe PHY driver initialized\n"); - return 0; } diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c index 228100357054..d52dd065e862 100644 --- a/drivers/phy/broadcom/phy-brcm-sata.c +++ b/drivers/phy/broadcom/phy-brcm-sata.c @@ -832,7 +832,7 @@ static int brcm_sata_phy_probe(struct platform_device *pdev) return PTR_ERR(provider); } - dev_info(dev, "registered %d port(s)\n", count); + dev_dbg(dev, "registered %d port(s)\n", count); return 0; } diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c index 45a5c00843bf..74613382ccb0 100644 --- a/drivers/phy/cadence/phy-cadence-sierra.c +++ b/drivers/phy/cadence/phy-cadence-sierra.c @@ -58,8 +58,11 @@ #define SIERRA_CMN_PLLLC1_GEN_PREG 0xC2 #define SIERRA_CMN_PLLLC1_FBDIV_INT_PREG 0xC3 #define SIERRA_CMN_PLLLC1_DCOCAL_CTRL_PREG 0xC5 +#define SIERRA_CMN_PLLLC1_MODE_PREG 0xC8 +#define SIERRA_CMN_PLLLC1_LF_COEFF_MODE1_PREG 0xC9 #define SIERRA_CMN_PLLLC1_LF_COEFF_MODE0_PREG 0xCA #define SIERRA_CMN_PLLLC1_CLK0_PREG 0xCE +#define SIERRA_CMN_PLLLC1_BWCAL_MODE1_PREG 0xCF #define SIERRA_CMN_PLLLC1_BWCAL_MODE0_PREG 0xD0 #define SIERRA_CMN_PLLLC1_SS_TIME_STEPSIZE_MODE_PREG 0xE2 @@ -1541,6 +1544,137 @@ static void cdns_sierra_phy_remove(struct platform_device *pdev) cdns_sierra_clk_unregister(phy); } +/* USB refclk 100MHz, 20b, SuperSpeed opt2, ext ssc, PLL LC1, multilink */ +static const struct cdns_reg_pairs usb_100_ext_ssc_plllc1_cmn_regs[] = { + {0x002D, SIERRA_CMN_PLLLC1_FBDIV_INT_PREG}, + {0x2086, SIERRA_CMN_PLLLC1_LF_COEFF_MODE1_PREG}, + {0x2086, SIERRA_CMN_PLLLC1_LF_COEFF_MODE0_PREG}, + {0x1005, SIERRA_CMN_PLLLC1_CLK0_PREG}, + {0x0000, SIERRA_CMN_PLLLC1_BWCAL_MODE1_PREG}, + {0x0000, SIERRA_CMN_PLLLC1_BWCAL_MODE0_PREG}, + {0x0000, SIERRA_CMN_PLLLC1_SS_TIME_STEPSIZE_MODE_PREG} +}; + +/* USB refclk 100MHz, 20b, SuperSpeed opt2, int ssc, PLL LC1, multilink */ +static const struct cdns_reg_pairs usb_100_int_ssc_plllc1_cmn_regs[] = { + {0x002D, SIERRA_CMN_PLLLC1_FBDIV_INT_PREG}, + {0x000E, SIERRA_CMN_PLLLC1_MODE_PREG}, + {0x1005, SIERRA_CMN_PLLLC1_CLK0_PREG} +}; + +static const struct cdns_reg_pairs usb_100_ml_ln_regs[] = { + {0xFE0A, SIERRA_DET_STANDEC_A_PREG}, + {0x000F, SIERRA_DET_STANDEC_B_PREG}, + {0x55A5, SIERRA_DET_STANDEC_C_PREG}, + {0x69AD, SIERRA_DET_STANDEC_D_PREG}, + {0x0241, SIERRA_DET_STANDEC_E_PREG}, + {0x0010, SIERRA_PSM_LANECAL_DLY_A1_RESETS_PREG}, + {0x0014, SIERRA_PSM_A0IN_TMR_PREG}, + {0x001D, SIERRA_PSM_A3IN_TMR_PREG}, + {0x0004, SIERRA_PSC_LN_A3_PREG}, + {0x0004, SIERRA_PSC_LN_IDLE_PREG}, + {0x001F, SIERRA_PSC_TX_A0_PREG}, + {0x0007, SIERRA_PSC_TX_A1_PREG}, + {0x0003, SIERRA_PSC_TX_A2_PREG}, + {0x0003, SIERRA_PSC_TX_A3_PREG}, + {0x0FFF, SIERRA_PSC_RX_A0_PREG}, + {0x0619, SIERRA_PSC_RX_A1_PREG}, + {0x0003, SIERRA_PSC_RX_A2_PREG}, + {0x0001, SIERRA_PSC_RX_A3_PREG}, + {0x0606, SIERRA_PLLCTRL_FBDIV_MODE01_PREG}, + {0x0001, SIERRA_PLLCTRL_SUBRATE_PREG}, + {0x0003, SIERRA_PLLCTRL_GEN_A_PREG}, + {0x0406, SIERRA_PLLCTRL_GEN_D_PREG}, + {0x5211, SIERRA_PLLCTRL_CPGAIN_MODE_PREG}, + {0x00CA, SIERRA_CLKPATH_BIASTRIM_PREG}, + {0x2512, SIERRA_DFE_BIASTRIM_PREG}, + {0x0000, SIERRA_DRVCTRL_ATTEN_PREG}, + {0x823E, SIERRA_CLKPATHCTRL_TMR_PREG}, + {0x078F, SIERRA_RX_CREQ_FLTR_A_MODE1_PREG}, + {0x078F, SIERRA_RX_CREQ_FLTR_A_MODE0_PREG}, + {0x7B3C, SIERRA_CREQ_CCLKDET_MODE01_PREG}, + {0x023F, SIERRA_RX_CTLE_MAINTENANCE_PREG}, + {0x3232, SIERRA_CREQ_FSMCLK_SEL_PREG}, + {0x0000, SIERRA_CREQ_EQ_CTRL_PREG}, + {0xCC44, SIERRA_CREQ_EQ_OPEN_EYE_THRESH_PREG}, + {0x8452, SIERRA_CTLELUT_CTRL_PREG}, + {0x4121, SIERRA_DFE_ECMP_RATESEL_PREG}, + {0x4121, SIERRA_DFE_SMP_RATESEL_PREG}, + {0x0002, SIERRA_DEQ_PHALIGN_CTRL}, + {0x3200, SIERRA_DEQ_CONCUR_CTRL1_PREG}, + {0x5064, SIERRA_DEQ_CONCUR_CTRL2_PREG}, + {0x0030, SIERRA_DEQ_EPIPWR_CTRL2_PREG}, + {0x5A5A, SIERRA_DEQ_ERRCMP_CTRL_PREG}, + {0x02F5, SIERRA_DEQ_OFFSET_CTRL_PREG}, + {0x02F5, SIERRA_DEQ_GAIN_CTRL_PREG}, + {0xA9A9, SIERRA_DEQ_VGATUNE_CTRL_PREG}, + {0x0014, SIERRA_DEQ_GLUT0}, + {0x0014, SIERRA_DEQ_GLUT1}, + {0x0014, SIERRA_DEQ_GLUT2}, + {0x0014, SIERRA_DEQ_GLUT3}, + {0x0014, SIERRA_DEQ_GLUT4}, + {0x0014, SIERRA_DEQ_GLUT5}, + {0x0014, SIERRA_DEQ_GLUT6}, + {0x0014, SIERRA_DEQ_GLUT7}, + {0x0014, SIERRA_DEQ_GLUT8}, + {0x0014, SIERRA_DEQ_GLUT9}, + {0x0014, SIERRA_DEQ_GLUT10}, + {0x0014, SIERRA_DEQ_GLUT11}, + {0x0014, SIERRA_DEQ_GLUT12}, + {0x0014, SIERRA_DEQ_GLUT13}, + {0x0014, SIERRA_DEQ_GLUT14}, + {0x0014, SIERRA_DEQ_GLUT15}, + {0x0014, SIERRA_DEQ_GLUT16}, + {0x0BAE, SIERRA_DEQ_ALUT0}, + {0x0AEB, SIERRA_DEQ_ALUT1}, + {0x0A28, SIERRA_DEQ_ALUT2}, + {0x0965, SIERRA_DEQ_ALUT3}, + {0x08A2, SIERRA_DEQ_ALUT4}, + {0x07DF, SIERRA_DEQ_ALUT5}, + {0x071C, SIERRA_DEQ_ALUT6}, + {0x0659, SIERRA_DEQ_ALUT7}, + {0x0596, SIERRA_DEQ_ALUT8}, + {0x0514, SIERRA_DEQ_ALUT9}, + {0x0492, SIERRA_DEQ_ALUT10}, + {0x0410, SIERRA_DEQ_ALUT11}, + {0x038E, SIERRA_DEQ_ALUT12}, + {0x030C, SIERRA_DEQ_ALUT13}, + {0x03F4, SIERRA_DEQ_DFETAP_CTRL_PREG}, + {0x0001, SIERRA_DFE_EN_1010_IGNORE_PREG}, + {0x3C01, SIERRA_DEQ_TAU_CTRL1_FAST_MAINT_PREG}, + {0x3C40, SIERRA_DEQ_TAU_CTRL1_SLOW_MAINT_PREG}, + {0x1C08, SIERRA_DEQ_TAU_CTRL2_PREG}, + {0x0033, SIERRA_DEQ_PICTRL_PREG}, + {0x0330, SIERRA_CPICAL_TMRVAL_MODE0_PREG}, + {0x01FF, SIERRA_CPICAL_PICNT_MODE1_PREG}, + {0x0009, SIERRA_CPI_OUTBUF_RATESEL_PREG}, + {0x3232, SIERRA_CPICAL_RES_STARTCODE_MODE23_PREG}, + {0x0005, SIERRA_LFPSDET_SUPPORT_PREG}, + {0x000F, SIERRA_LFPSFILT_NS_PREG}, + {0x0009, SIERRA_LFPSFILT_RD_PREG}, + {0x0001, SIERRA_LFPSFILT_MP_PREG}, + {0x8013, SIERRA_SDFILT_H2L_A_PREG}, + {0x8009, SIERRA_SDFILT_L2H_PREG}, + {0x0024, SIERRA_RXBUFFER_CTLECTRL_PREG}, + {0x0020, SIERRA_RXBUFFER_RCDFECTRL_PREG}, + {0x4243, SIERRA_RXBUFFER_DFECTRL_PREG} +}; + +static const struct cdns_sierra_vals usb_100_ext_ssc_plllc1_cmn_vals = { + .reg_pairs = usb_100_ext_ssc_plllc1_cmn_regs, + .num_regs = ARRAY_SIZE(usb_100_ext_ssc_plllc1_cmn_regs), +}; + +static const struct cdns_sierra_vals usb_100_int_ssc_plllc1_cmn_vals = { + .reg_pairs = usb_100_int_ssc_plllc1_cmn_regs, + .num_regs = ARRAY_SIZE(usb_100_int_ssc_plllc1_cmn_regs), +}; + +static const struct cdns_sierra_vals usb_100_ml_ln_vals = { + .reg_pairs = usb_100_ml_ln_regs, + .num_regs = ARRAY_SIZE(usb_100_ml_ln_regs), +}; + /* SGMII PHY PMA lane configuration */ static const struct cdns_reg_pairs sgmii_phy_pma_ln_regs[] = { {0x9010, SIERRA_PHY_PMA_XCVR_CTRL} @@ -2513,6 +2647,11 @@ static const struct cdns_sierra_data cdns_map_sierra = { [EXTERNAL_SSC] = &pcie_phy_pcs_cmn_vals, [INTERNAL_SSC] = &pcie_phy_pcs_cmn_vals, }, + [TYPE_USB] = { + [NO_SSC] = &pcie_phy_pcs_cmn_vals, + [EXTERNAL_SSC] = &pcie_phy_pcs_cmn_vals, + [INTERNAL_SSC] = &pcie_phy_pcs_cmn_vals, + }, }, }, .pma_cmn_vals = { @@ -2532,11 +2671,20 @@ static const struct cdns_sierra_data cdns_map_sierra = { [EXTERNAL_SSC] = &pcie_100_ext_ssc_plllc_cmn_vals, [INTERNAL_SSC] = &pcie_100_int_ssc_plllc_cmn_vals, }, + [TYPE_USB] = { + [NO_SSC] = &pcie_100_no_ssc_plllc_cmn_vals, + [EXTERNAL_SSC] = &pcie_100_ext_ssc_plllc_cmn_vals, + [INTERNAL_SSC] = &pcie_100_int_ssc_plllc_cmn_vals, + }, }, [TYPE_USB] = { [TYPE_NONE] = { [EXTERNAL_SSC] = &usb_100_ext_ssc_cmn_vals, }, + [TYPE_PCIE] = { + [EXTERNAL_SSC] = &usb_100_ext_ssc_plllc1_cmn_vals, + [INTERNAL_SSC] = &usb_100_int_ssc_plllc1_cmn_vals, + }, }, [TYPE_SGMII] = { [TYPE_NONE] = { @@ -2573,11 +2721,20 @@ static const struct cdns_sierra_data cdns_map_sierra = { [EXTERNAL_SSC] = &ml_pcie_100_ext_ssc_ln_vals, [INTERNAL_SSC] = &ml_pcie_100_int_ssc_ln_vals, }, + [TYPE_USB] = { + [NO_SSC] = &ml_pcie_100_no_ssc_ln_vals, + [EXTERNAL_SSC] = &ml_pcie_100_ext_ssc_ln_vals, + [INTERNAL_SSC] = &ml_pcie_100_int_ssc_ln_vals, + }, }, [TYPE_USB] = { [TYPE_NONE] = { [EXTERNAL_SSC] = &usb_100_ext_ssc_ln_vals, }, + [TYPE_PCIE] = { + [EXTERNAL_SSC] = &usb_100_ml_ln_vals, + [INTERNAL_SSC] = &usb_100_ml_ln_vals, + }, }, [TYPE_SGMII] = { [TYPE_NONE] = { @@ -2620,6 +2777,11 @@ static const struct cdns_sierra_data cdns_ti_map_sierra = { [EXTERNAL_SSC] = &pcie_phy_pcs_cmn_vals, [INTERNAL_SSC] = &pcie_phy_pcs_cmn_vals, }, + [TYPE_USB] = { + [NO_SSC] = &pcie_phy_pcs_cmn_vals, + [EXTERNAL_SSC] = &pcie_phy_pcs_cmn_vals, + [INTERNAL_SSC] = &pcie_phy_pcs_cmn_vals, + }, }, }, .phy_pma_ln_vals = { @@ -2655,11 +2817,20 @@ static const struct cdns_sierra_data cdns_ti_map_sierra = { [EXTERNAL_SSC] = &pcie_100_ext_ssc_plllc_cmn_vals, [INTERNAL_SSC] = &pcie_100_int_ssc_plllc_cmn_vals, }, + [TYPE_USB] = { + [NO_SSC] = &pcie_100_no_ssc_plllc_cmn_vals, + [EXTERNAL_SSC] = &pcie_100_ext_ssc_plllc_cmn_vals, + [INTERNAL_SSC] = &pcie_100_int_ssc_plllc_cmn_vals, + }, }, [TYPE_USB] = { [TYPE_NONE] = { [EXTERNAL_SSC] = &usb_100_ext_ssc_cmn_vals, }, + [TYPE_PCIE] = { + [EXTERNAL_SSC] = &usb_100_ext_ssc_plllc1_cmn_vals, + [INTERNAL_SSC] = &usb_100_int_ssc_plllc1_cmn_vals, + }, }, [TYPE_SGMII] = { [TYPE_PCIE] = { @@ -2693,11 +2864,20 @@ static const struct cdns_sierra_data cdns_ti_map_sierra = { [EXTERNAL_SSC] = &ti_ml_pcie_100_ext_ssc_ln_vals, [INTERNAL_SSC] = &ti_ml_pcie_100_int_ssc_ln_vals, }, + [TYPE_USB] = { + [NO_SSC] = &ti_ml_pcie_100_no_ssc_ln_vals, + [EXTERNAL_SSC] = &ti_ml_pcie_100_ext_ssc_ln_vals, + [INTERNAL_SSC] = &ti_ml_pcie_100_int_ssc_ln_vals, + }, }, [TYPE_USB] = { [TYPE_NONE] = { [EXTERNAL_SSC] = &usb_100_ext_ssc_ln_vals, }, + [TYPE_PCIE] = { + [EXTERNAL_SSC] = &usb_100_ml_ln_vals, + [INTERNAL_SSC] = &usb_100_ml_ln_vals, + }, }, [TYPE_SGMII] = { [TYPE_PCIE] = { diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c index a281c0dfae97..37fa4bad6bd7 100644 --- a/drivers/phy/cadence/phy-cadence-torrent.c +++ b/drivers/phy/cadence/phy-cadence-torrent.c @@ -197,6 +197,7 @@ #define RX_SDCAL1_INIT_TMR 0x004CU #define RX_SDCAL1_ITER_TMR 0x004DU #define RX_CDRLF_CNFG 0x0080U +#define RX_CDRLF_CNFG2 0x0081U #define RX_CDRLF_CNFG3 0x0082U #define RX_SIGDET_HL_FILT_TMR 0x0090U #define RX_REE_GCSM1_CTRL 0x0108U @@ -204,6 +205,8 @@ #define RX_REE_GCSM1_EQENM_PH2 0x010AU #define RX_REE_GCSM2_CTRL 0x0110U #define RX_REE_PERGCSM_CTRL 0x0118U +#define RX_REE_PEAK_UTHR 0x0142U +#define RX_REE_PEAK_LTHR 0x0143U #define RX_REE_ATTEN_THR 0x0149U #define RX_REE_TAP1_CLIP 0x0171U #define RX_REE_TAP2TON_CLIP 0x0172U @@ -212,6 +215,7 @@ #define RX_DIAG_DFE_CTRL 0x01E0U #define RX_DIAG_DFE_AMP_TUNE_2 0x01E2U #define RX_DIAG_DFE_AMP_TUNE_3 0x01E3U +#define RX_DIAG_REE_DAC_CTRL 0x01E4U #define RX_DIAG_NQST_CTRL 0x01E5U #define RX_DIAG_SIGDET_TUNE 0x01E8U #define RX_DIAG_PI_RATE 0x01F4U @@ -295,6 +299,7 @@ enum cdns_torrent_phy_type { TYPE_QSGMII, TYPE_USB, TYPE_USXGMII, + TYPE_PCIE_ML, }; enum cdns_torrent_ref_clk { @@ -693,6 +698,7 @@ static const char *cdns_torrent_get_phy_type(enum cdns_torrent_phy_type phy_type case TYPE_DP: return "DisplayPort"; case TYPE_PCIE: + case TYPE_PCIE_ML: return "PCIe"; case TYPE_SGMII: return "SGMII"; @@ -2478,6 +2484,7 @@ int cdns_torrent_phy_configure_multilink(struct cdns_torrent_phy *cdns_phy) enum cdns_torrent_ssc_mode ssc; struct regmap *regmap; u32 num_regs, num_protocols, protocol; + u32 num_pcie_links = 0; num_protocols = hweight32(cdns_phy->protocol_bitmask); /* Maximum 2 protocols are supported */ @@ -2510,6 +2517,44 @@ int cdns_torrent_phy_configure_multilink(struct cdns_torrent_phy *cdns_phy) phy_t1 = fns(cdns_phy->protocol_bitmask, 0); phy_t2 = fns(cdns_phy->protocol_bitmask, 1); + + /* + * PCIe Multilink configuration can be supported along with a + * non-PCIe protocol. The existing limitation associated with + * the standalone PCIe Multilink configuration still remains, + * implying that there can be only two links (subnodes) of the + * PHY type PCIe which constitute the PCIe Multilink. + * + * Such configurations are handled by introducing a new protocol + * namely TYPE_PCIE_ML. Both of the PCIe links which have the + * protocol as TYPE_PCIE shall be treated as though the protocol + * corresponding to them is TYPE_PCIE_ML only for the sake of + * configuring the SERDES. + * + * PCIe Multilink configuration can be identified by checking if + * there are exactly two links with phy_type set to TYPE_PCIE. + * phy_t1 and phy_t2 are modified in such cases to support the + * PCIe Multilink configuration with a non-PCIe protocol. + */ + for (node = 0; node < cdns_phy->nsubnodes; node++) { + if (cdns_phy->phys[node].phy_type == TYPE_PCIE) + num_pcie_links++; + } + + if (num_pcie_links > 2) { + dev_err(dev, "cannot support PCIe Multilink with %u PCIe links\n", + num_pcie_links); + return -EINVAL; + } else if (num_pcie_links == 2) { + phy_t1 = TYPE_PCIE_ML; + for (node = 0; node < cdns_phy->nsubnodes; node++) { + if (cdns_phy->phys[node].phy_type == TYPE_PCIE) { + cdns_phy->phys[node].phy_type = TYPE_PCIE_ML; + continue; + } + phy_t2 = cdns_phy->phys[node].phy_type; + } + } } /** @@ -2676,6 +2721,11 @@ int cdns_torrent_phy_configure_multilink(struct cdns_torrent_phy *cdns_phy) } } + /* Restore TYPE_PCIE_ML to TYPE_PCIE to be compatible with suspend-resume */ + for (node = 0; node < cdns_phy->nsubnodes; node++) + if (cdns_phy->phys[node].phy_type == TYPE_PCIE_ML) + cdns_phy->phys[node].phy_type = TYPE_PCIE; + /* Take the PHY out of reset */ ret = reset_control_deassert(cdns_phy->phy_rst); if (ret) @@ -3088,15 +3138,14 @@ static int cdns_torrent_phy_probe(struct platform_device *pdev) } if (cdns_phy->nsubnodes > 1) - dev_dbg(dev, "Multi-link: %s (%d lanes) & %s (%d lanes)", - cdns_torrent_get_phy_type(cdns_phy->phys[0].phy_type), - cdns_phy->phys[0].num_lanes, - cdns_torrent_get_phy_type(cdns_phy->phys[1].phy_type), - cdns_phy->phys[1].num_lanes); + dev_dbg(dev, "Multi link configuration:\n"); else - dev_dbg(dev, "Single link: %s (%d lanes)", - cdns_torrent_get_phy_type(cdns_phy->phys[0].phy_type), - cdns_phy->phys[0].num_lanes); + dev_dbg(dev, "Single link configuration:\n"); + + for (i = 0; i < cdns_phy->nsubnodes; i++) + dev_dbg(dev, "%s (%d lanes)", + cdns_torrent_get_phy_type(cdns_phy->phys[i].phy_type), + cdns_phy->phys[i].num_lanes); return 0; @@ -3131,6 +3180,132 @@ static void cdns_torrent_phy_remove(struct platform_device *pdev) cdns_torrent_clk_cleanup(cdns_phy); } +/* Multilink PCIe and USB Same SSC link configuration */ +static const struct cdns_reg_pairs ml_pcie_usb_link_cmn_regs[] = { + {0x0002, PHY_PLL_CFG}, + {0x8600, CMN_PDIAG_PLL0_CLK_SEL_M0} +}; + +static const struct cdns_reg_pairs ml_pcie_usb_xcvr_diag_ln_regs[] = { + {0x0100, XCVR_DIAG_HSCLK_SEL}, + {0x0013, XCVR_DIAG_HSCLK_DIV}, + {0x0812, XCVR_DIAG_PLLDRC_CTRL} +}; + +static const struct cdns_reg_pairs usb_ml_pcie_xcvr_diag_ln_regs[] = { + {0x0041, XCVR_DIAG_PLLDRC_CTRL}, +}; + +static const struct cdns_torrent_vals ml_pcie_usb_link_cmn_vals = { + .reg_pairs = ml_pcie_usb_link_cmn_regs, + .num_regs = ARRAY_SIZE(ml_pcie_usb_link_cmn_regs), +}; + +static const struct cdns_torrent_vals ml_pcie_usb_xcvr_diag_ln_vals = { + .reg_pairs = ml_pcie_usb_xcvr_diag_ln_regs, + .num_regs = ARRAY_SIZE(ml_pcie_usb_xcvr_diag_ln_regs), +}; + +static const struct cdns_torrent_vals usb_ml_pcie_xcvr_diag_ln_vals = { + .reg_pairs = usb_ml_pcie_xcvr_diag_ln_regs, + .num_regs = ARRAY_SIZE(usb_ml_pcie_xcvr_diag_ln_regs), +}; + +/* Multi link PCIe configuration */ +static const struct cdns_reg_pairs ml_pcie_link_cmn_regs[] = { + {0x0002, PHY_PLL_CFG}, + {0x0601, CMN_PDIAG_PLL0_CLK_SEL_M0} +}; + +static const struct cdns_reg_pairs ml_pcie_xcvr_diag_ln_regs[] = { + {0x0100, XCVR_DIAG_HSCLK_SEL}, + {0x0001, XCVR_DIAG_HSCLK_DIV}, + {0x0812, XCVR_DIAG_PLLDRC_CTRL} +}; + +static const struct cdns_torrent_vals ml_pcie_link_cmn_vals = { + .reg_pairs = ml_pcie_link_cmn_regs, + .num_regs = ARRAY_SIZE(ml_pcie_link_cmn_regs), +}; + +static const struct cdns_torrent_vals ml_pcie_xcvr_diag_ln_vals = { + .reg_pairs = ml_pcie_xcvr_diag_ln_regs, + .num_regs = ARRAY_SIZE(ml_pcie_xcvr_diag_ln_regs), +}; + +/* Multi link PCIe, 100 MHz Ref clk, no SSC */ +static const struct cdns_reg_pairs ml_pcie_100_no_ssc_cmn_regs[] = { + {0x0003, CMN_PLL0_VCOCAL_TCTRL}, + {0x0003, CMN_PLL1_VCOCAL_TCTRL} +}; + +static const struct cdns_reg_pairs ml_pcie_100_no_ssc_rx_ln_regs[] = { + {0x0019, RX_REE_TAP1_CLIP}, + {0x0019, RX_REE_TAP2TON_CLIP}, + {0x0008, RX_REE_PEAK_UTHR}, + {0x018E, RX_CDRLF_CNFG}, + {0x2E33, RX_CDRLF_CNFG2}, + {0x0001, RX_DIAG_ACYA}, + {0x0C21, RX_DIAG_DFE_AMP_TUNE_2}, + {0x0002, RX_DIAG_DFE_AMP_TUNE_3}, + {0x0005, RX_DIAG_REE_DAC_CTRL} +}; + +static const struct cdns_torrent_vals ml_pcie_100_no_ssc_cmn_vals = { + .reg_pairs = ml_pcie_100_no_ssc_cmn_regs, + .num_regs = ARRAY_SIZE(ml_pcie_100_no_ssc_cmn_regs), +}; + +static const struct cdns_torrent_vals ml_pcie_100_no_ssc_rx_ln_vals = { + .reg_pairs = ml_pcie_100_no_ssc_rx_ln_regs, + .num_regs = ARRAY_SIZE(ml_pcie_100_no_ssc_rx_ln_regs), +}; + +/* Multi link PCIe, 100 MHz Ref clk, internal SSC */ +static const struct cdns_reg_pairs ml_pcie_100_int_ssc_cmn_regs[] = { + {0x0004, CMN_PLL0_DSM_DIAG_M0}, + {0x0004, CMN_PLL1_DSM_DIAG_M0}, + {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M0}, + {0x0509, CMN_PDIAG_PLL1_CP_PADJ_M0}, + {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M0}, + {0x0F00, CMN_PDIAG_PLL1_CP_IADJ_M0}, + {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M0}, + {0x0F08, CMN_PDIAG_PLL1_FILT_PADJ_M0}, + {0x0064, CMN_PLL0_INTDIV_M0}, + {0x0050, CMN_PLL1_INTDIV_M0}, + {0x0002, CMN_PLL0_FRACDIVH_M0}, + {0x0002, CMN_PLL1_FRACDIVH_M0}, + {0x0044, CMN_PLL0_HIGH_THR_M0}, + {0x0036, CMN_PLL1_HIGH_THR_M0}, + {0x0002, CMN_PDIAG_PLL0_CTRL_M0}, + {0x0002, CMN_PDIAG_PLL1_CTRL_M0}, + {0x0001, CMN_PLL0_SS_CTRL1_M0}, + {0x0001, CMN_PLL1_SS_CTRL1_M0}, + {0x011B, CMN_PLL0_SS_CTRL2_M0}, + {0x011B, CMN_PLL1_SS_CTRL2_M0}, + {0x006E, CMN_PLL0_SS_CTRL3_M0}, + {0x0058, CMN_PLL1_SS_CTRL3_M0}, + {0x000E, CMN_PLL0_SS_CTRL4_M0}, + {0x0012, CMN_PLL1_SS_CTRL4_M0}, + {0x0C5E, CMN_PLL0_VCOCAL_REFTIM_START}, + {0x0C5E, CMN_PLL1_VCOCAL_REFTIM_START}, + {0x0C56, CMN_PLL0_VCOCAL_PLLCNT_START}, + {0x0C56, CMN_PLL1_VCOCAL_PLLCNT_START}, + {0x0003, CMN_PLL0_VCOCAL_TCTRL}, + {0x0003, CMN_PLL1_VCOCAL_TCTRL}, + {0x00C7, CMN_PLL0_LOCK_REFCNT_START}, + {0x00C7, CMN_PLL1_LOCK_REFCNT_START}, + {0x00C7, CMN_PLL0_LOCK_PLLCNT_START}, + {0x00C7, CMN_PLL1_LOCK_PLLCNT_START}, + {0x0005, CMN_PLL0_LOCK_PLLCNT_THR}, + {0x0005, CMN_PLL1_LOCK_PLLCNT_THR} +}; + +static const struct cdns_torrent_vals ml_pcie_100_int_ssc_cmn_vals = { + .reg_pairs = ml_pcie_100_int_ssc_cmn_regs, + .num_regs = ARRAY_SIZE(ml_pcie_100_int_ssc_cmn_regs), +}; + /* SGMII and QSGMII link configuration */ static const struct cdns_reg_pairs sgmii_qsgmii_link_cmn_regs[] = { {0x0002, PHY_PLL_CFG} @@ -4042,6 +4217,8 @@ static const struct cdns_reg_pairs usb_100_no_ssc_rx_ln_regs[] = { {0x0C02, RX_REE_ATTEN_THR}, {0x0330, RX_REE_SMGM_CTRL1}, {0x0300, RX_REE_SMGM_CTRL2}, + {0x0000, RX_REE_PEAK_UTHR}, + {0x01F5, RX_REE_PEAK_LTHR}, {0x0019, RX_REE_TAP1_CLIP}, {0x0019, RX_REE_TAP2TON_CLIP}, {0x1004, RX_DIAG_SIGDET_TUNE}, @@ -4531,7 +4708,7 @@ static const struct cdns_torrent_vals sl_sgmii_xcvr_diag_ln_vals = { .num_regs = ARRAY_SIZE(sl_sgmii_xcvr_diag_ln_regs), }; -/* Multi link PCIe, 100 MHz Ref clk, internal SSC */ +/* For PCIe (with some other protocol), 100 MHz Ref clk, internal SSC */ static const struct cdns_reg_pairs pcie_100_int_ssc_cmn_regs[] = { {0x0004, CMN_PLL0_DSM_DIAG_M0}, {0x0004, CMN_PLL0_DSM_DIAG_M1}, @@ -4670,12 +4847,15 @@ static const struct cdns_torrent_vals_entry link_cmn_vals_entries[] = { {CDNS_TORRENT_KEY_ANYCLK(TYPE_DP, TYPE_USB), &usb_dp_link_cmn_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_PCIE, TYPE_NONE), NULL}, + {CDNS_TORRENT_KEY_ANYCLK(TYPE_PCIE, TYPE_PCIE), &ml_pcie_link_cmn_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_PCIE, TYPE_SGMII), &pcie_sgmii_link_cmn_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_PCIE, TYPE_QSGMII), &pcie_sgmii_link_cmn_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_PCIE, TYPE_USB), &pcie_usb_link_cmn_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_PCIE, TYPE_DP), &pcie_dp_link_cmn_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_PCIE, TYPE_USXGMII), &pcie_usxgmii_link_cmn_vals}, + {CDNS_TORRENT_KEY_ANYCLK(TYPE_PCIE_ML, TYPE_USB), &ml_pcie_usb_link_cmn_vals}, + {CDNS_TORRENT_KEY_ANYCLK(TYPE_SGMII, TYPE_NONE), &sl_sgmii_link_cmn_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_SGMII, TYPE_PCIE), &pcie_sgmii_link_cmn_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_SGMII, TYPE_QSGMII), &sgmii_qsgmii_link_cmn_vals}, @@ -4690,6 +4870,7 @@ static const struct cdns_torrent_vals_entry link_cmn_vals_entries[] = { {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_NONE), &sl_usb_link_cmn_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_PCIE), &pcie_usb_link_cmn_vals}, + {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_PCIE_ML), &ml_pcie_usb_link_cmn_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_SGMII), &usb_sgmii_link_cmn_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_QSGMII), &usb_sgmii_link_cmn_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_DP), &usb_dp_link_cmn_vals}, @@ -4706,12 +4887,15 @@ static const struct cdns_torrent_vals_entry xcvr_diag_vals_entries[] = { {CDNS_TORRENT_KEY_ANYCLK(TYPE_DP, TYPE_USB), &dp_usb_xcvr_diag_ln_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_PCIE, TYPE_NONE), NULL}, + {CDNS_TORRENT_KEY_ANYCLK(TYPE_PCIE, TYPE_PCIE), &ml_pcie_xcvr_diag_ln_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_PCIE, TYPE_SGMII), &pcie_sgmii_xcvr_diag_ln_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_PCIE, TYPE_QSGMII), &pcie_sgmii_xcvr_diag_ln_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_PCIE, TYPE_USB), &pcie_usb_xcvr_diag_ln_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_PCIE, TYPE_DP), &pcie_dp_xcvr_diag_ln_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_PCIE, TYPE_USXGMII), &pcie_usxgmii_xcvr_diag_ln_vals}, + {CDNS_TORRENT_KEY_ANYCLK(TYPE_PCIE_ML, TYPE_USB), &ml_pcie_usb_xcvr_diag_ln_vals}, + {CDNS_TORRENT_KEY_ANYCLK(TYPE_SGMII, TYPE_NONE), &sl_sgmii_xcvr_diag_ln_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_SGMII, TYPE_PCIE), &sgmii_pcie_xcvr_diag_ln_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_SGMII, TYPE_QSGMII), &sgmii_qsgmii_xcvr_diag_ln_vals}, @@ -4726,6 +4910,7 @@ static const struct cdns_torrent_vals_entry xcvr_diag_vals_entries[] = { {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_NONE), &sl_usb_xcvr_diag_ln_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_PCIE), &usb_pcie_xcvr_diag_ln_vals}, + {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_PCIE_ML), &usb_ml_pcie_xcvr_diag_ln_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_SGMII), &usb_sgmii_xcvr_diag_ln_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_QSGMII), &usb_sgmii_xcvr_diag_ln_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_DP), &usb_dp_xcvr_diag_ln_vals}, @@ -4739,6 +4924,7 @@ static const struct cdns_torrent_vals_entry xcvr_diag_vals_entries[] = { static const struct cdns_torrent_vals_entry pcs_cmn_vals_entries[] = { {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_NONE), &usb_phy_pcs_cmn_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_PCIE), &usb_phy_pcs_cmn_vals}, + {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_PCIE_ML), &usb_phy_pcs_cmn_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_SGMII), &usb_phy_pcs_cmn_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_QSGMII), &usb_phy_pcs_cmn_vals}, {CDNS_TORRENT_KEY_ANYCLK(TYPE_USB, TYPE_DP), &usb_phy_pcs_cmn_vals}, @@ -4756,6 +4942,10 @@ static const struct cdns_torrent_vals_entry cmn_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_NONE, EXTERNAL_SSC), NULL}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_NONE, INTERNAL_SSC), &sl_pcie_100_int_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, NO_SSC), &ml_pcie_100_no_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, EXTERNAL_SSC), &ml_pcie_100_no_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, INTERNAL_SSC), &ml_pcie_100_int_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, NO_SSC), &pcie_100_no_ssc_cmn_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, EXTERNAL_SSC), &pcie_100_no_ssc_cmn_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, INTERNAL_SSC), &pcie_100_int_ssc_cmn_vals}, @@ -4770,6 +4960,10 @@ static const struct cdns_torrent_vals_entry cmn_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_DP, NO_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, NO_SSC), &ml_pcie_100_no_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, EXTERNAL_SSC), &ml_pcie_100_no_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, INTERNAL_SSC), &ml_pcie_100_int_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_SGMII, TYPE_NONE, NO_SSC), &sl_sgmii_100_no_ssc_cmn_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_SGMII, TYPE_PCIE, NO_SSC), &sgmii_100_no_ssc_cmn_vals}, @@ -4802,6 +4996,10 @@ static const struct cdns_torrent_vals_entry cmn_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE, EXTERNAL_SSC), &usb_100_no_ssc_cmn_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE, INTERNAL_SSC), &usb_100_int_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, NO_SSC), &usb_100_no_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, EXTERNAL_SSC), &usb_100_no_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, INTERNAL_SSC), &usb_100_no_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, NO_SSC), &sl_usb_100_no_ssc_cmn_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, EXTERNAL_SSC), &sl_usb_100_no_ssc_cmn_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, INTERNAL_SSC), &sl_usb_100_int_ssc_cmn_vals}, @@ -4838,6 +5036,10 @@ static const struct cdns_torrent_vals_entry cdns_tx_ln_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_NONE, EXTERNAL_SSC), NULL}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_NONE, INTERNAL_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, NO_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, EXTERNAL_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, INTERNAL_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, NO_SSC), NULL}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, EXTERNAL_SSC), NULL}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, INTERNAL_SSC), NULL}, @@ -4852,6 +5054,10 @@ static const struct cdns_torrent_vals_entry cdns_tx_ln_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_DP, NO_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, NO_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, EXTERNAL_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, INTERNAL_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_SGMII, TYPE_NONE, NO_SSC), &sgmii_100_no_ssc_tx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_SGMII, TYPE_PCIE, NO_SSC), &sgmii_100_no_ssc_tx_ln_vals}, @@ -4884,6 +5090,10 @@ static const struct cdns_torrent_vals_entry cdns_tx_ln_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE, EXTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE, INTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, NO_SSC), &usb_100_no_ssc_tx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, EXTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, INTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, NO_SSC), &usb_100_no_ssc_tx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, EXTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, INTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, @@ -4920,6 +5130,10 @@ static const struct cdns_torrent_vals_entry cdns_rx_ln_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_NONE, EXTERNAL_SSC), &pcie_100_no_ssc_rx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_NONE, INTERNAL_SSC), &pcie_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, NO_SSC), &ml_pcie_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, EXTERNAL_SSC), &ml_pcie_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, INTERNAL_SSC), &ml_pcie_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, NO_SSC), &pcie_100_no_ssc_rx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, EXTERNAL_SSC), &pcie_100_no_ssc_rx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, INTERNAL_SSC), &pcie_100_no_ssc_rx_ln_vals}, @@ -4934,6 +5148,10 @@ static const struct cdns_torrent_vals_entry cdns_rx_ln_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_DP, NO_SSC), &pcie_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, NO_SSC), &ml_pcie_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, EXTERNAL_SSC), &ml_pcie_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, INTERNAL_SSC), &ml_pcie_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_SGMII, TYPE_NONE, NO_SSC), &sgmii_100_no_ssc_rx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_SGMII, TYPE_PCIE, NO_SSC), &sgmii_100_no_ssc_rx_ln_vals}, @@ -4966,6 +5184,10 @@ static const struct cdns_torrent_vals_entry cdns_rx_ln_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE, EXTERNAL_SSC), &usb_100_no_ssc_rx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE, INTERNAL_SSC), &usb_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, NO_SSC), &usb_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, EXTERNAL_SSC), &usb_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, INTERNAL_SSC), &usb_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, NO_SSC), &usb_100_no_ssc_rx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, EXTERNAL_SSC), &usb_100_no_ssc_rx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, INTERNAL_SSC), &usb_100_no_ssc_rx_ln_vals}, @@ -5038,6 +5260,10 @@ static const struct cdns_torrent_vals_entry ti_tx_ln_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_NONE, EXTERNAL_SSC), NULL}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_NONE, INTERNAL_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, NO_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, EXTERNAL_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, INTERNAL_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, NO_SSC), NULL}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, EXTERNAL_SSC), NULL}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, INTERNAL_SSC), NULL}, @@ -5052,6 +5278,10 @@ static const struct cdns_torrent_vals_entry ti_tx_ln_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_DP, NO_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, NO_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, EXTERNAL_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, INTERNAL_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_SGMII, TYPE_NONE, NO_SSC), &ti_sgmii_100_no_ssc_tx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_SGMII, TYPE_PCIE, NO_SSC), &ti_sgmii_100_no_ssc_tx_ln_vals}, @@ -5084,6 +5314,10 @@ static const struct cdns_torrent_vals_entry ti_tx_ln_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE, EXTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE, INTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, NO_SSC), &usb_100_no_ssc_tx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, EXTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, INTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, NO_SSC), &usb_100_no_ssc_tx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, EXTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, INTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, @@ -5154,6 +5388,10 @@ static const struct cdns_torrent_vals_entry ti_j7200_cmn_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_NONE, EXTERNAL_SSC), NULL}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_NONE, INTERNAL_SSC), &sl_pcie_100_int_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, NO_SSC), &ml_pcie_100_no_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, EXTERNAL_SSC), &ml_pcie_100_no_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, INTERNAL_SSC), &ml_pcie_100_int_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, NO_SSC), &pcie_100_no_ssc_cmn_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, EXTERNAL_SSC), &pcie_100_no_ssc_cmn_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, INTERNAL_SSC), &pcie_100_int_ssc_cmn_vals}, @@ -5168,6 +5406,10 @@ static const struct cdns_torrent_vals_entry ti_j7200_cmn_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_DP, NO_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, NO_SSC), &ml_pcie_100_no_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, EXTERNAL_SSC), &ml_pcie_100_no_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, INTERNAL_SSC), &ml_pcie_100_int_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_SGMII, TYPE_NONE, NO_SSC), &sl_sgmii_100_no_ssc_cmn_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_SGMII, TYPE_PCIE, NO_SSC), &sgmii_100_no_ssc_cmn_vals}, @@ -5200,6 +5442,10 @@ static const struct cdns_torrent_vals_entry ti_j7200_cmn_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE, EXTERNAL_SSC), &usb_100_no_ssc_cmn_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE, INTERNAL_SSC), &usb_100_int_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, NO_SSC), &usb_100_no_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, EXTERNAL_SSC), &usb_100_no_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, INTERNAL_SSC), &usb_100_no_ssc_cmn_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, NO_SSC), &sl_usb_100_no_ssc_cmn_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, EXTERNAL_SSC), &sl_usb_100_no_ssc_cmn_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, INTERNAL_SSC), &sl_usb_100_int_ssc_cmn_vals}, @@ -5236,6 +5482,10 @@ static const struct cdns_torrent_vals_entry ti_j7200_tx_ln_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_NONE, EXTERNAL_SSC), NULL}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_NONE, INTERNAL_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, NO_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, EXTERNAL_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, INTERNAL_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, NO_SSC), NULL}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, EXTERNAL_SSC), NULL}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, INTERNAL_SSC), NULL}, @@ -5250,6 +5500,10 @@ static const struct cdns_torrent_vals_entry ti_j7200_tx_ln_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_DP, NO_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, NO_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, EXTERNAL_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, INTERNAL_SSC), NULL}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_SGMII, TYPE_NONE, NO_SSC), &ti_sgmii_100_no_ssc_tx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_SGMII, TYPE_PCIE, NO_SSC), &ti_sgmii_100_no_ssc_tx_ln_vals}, @@ -5282,6 +5536,10 @@ static const struct cdns_torrent_vals_entry ti_j7200_tx_ln_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE, EXTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE, INTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, NO_SSC), &usb_100_no_ssc_tx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, EXTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, INTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, NO_SSC), &usb_100_no_ssc_tx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, EXTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, INTERNAL_SSC), &usb_100_no_ssc_tx_ln_vals}, @@ -5318,6 +5576,10 @@ static const struct cdns_torrent_vals_entry ti_j7200_rx_ln_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_NONE, EXTERNAL_SSC), &pcie_100_no_ssc_rx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_NONE, INTERNAL_SSC), &pcie_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, NO_SSC), &pcie_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, EXTERNAL_SSC), &pcie_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_PCIE, INTERNAL_SSC), &pcie_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, NO_SSC), &pcie_100_no_ssc_rx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, EXTERNAL_SSC), &pcie_100_no_ssc_rx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_SGMII, INTERNAL_SSC), &pcie_100_no_ssc_rx_ln_vals}, @@ -5332,6 +5594,10 @@ static const struct cdns_torrent_vals_entry ti_j7200_rx_ln_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE, TYPE_DP, NO_SSC), &pcie_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, NO_SSC), &pcie_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, EXTERNAL_SSC), &pcie_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_PCIE_ML, TYPE_USB, INTERNAL_SSC), &pcie_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_SGMII, TYPE_NONE, NO_SSC), &sgmii_100_no_ssc_rx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_SGMII, TYPE_PCIE, NO_SSC), &sgmii_100_no_ssc_rx_ln_vals}, @@ -5364,6 +5630,10 @@ static const struct cdns_torrent_vals_entry ti_j7200_rx_ln_vals_entries[] = { {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE, EXTERNAL_SSC), &usb_100_no_ssc_rx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE, INTERNAL_SSC), &usb_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, NO_SSC), &usb_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, EXTERNAL_SSC), &usb_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_PCIE_ML, INTERNAL_SSC), &usb_100_no_ssc_rx_ln_vals}, + {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, NO_SSC), &usb_100_no_ssc_rx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, EXTERNAL_SSC), &usb_100_no_ssc_rx_ln_vals}, {CDNS_TORRENT_KEY(CLK_100_MHZ, CLK_100_MHZ, TYPE_USB, TYPE_SGMII, INTERNAL_SSC), &usb_100_no_ssc_rx_ln_vals}, diff --git a/drivers/phy/marvell/phy-pxa-usb.c b/drivers/phy/marvell/phy-pxa-usb.c index 6c98eb9608e9..c0bb71f80c04 100644 --- a/drivers/phy/marvell/phy-pxa-usb.c +++ b/drivers/phy/marvell/phy-pxa-usb.c @@ -325,7 +325,6 @@ static int pxa_usb_phy_probe(struct platform_device *pdev) phy_create_lookup(pxa_usb_phy->phy, "usb", "mv-otg"); } - dev_info(dev, "Marvell PXA USB PHY"); return 0; } diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c index 644a34bd2b0b..f6504e0ecd1a 100644 --- a/drivers/phy/mediatek/phy-mtk-tphy.c +++ b/drivers/phy/mediatek/phy-mtk-tphy.c @@ -210,8 +210,6 @@ #define P2F_USB_FM_VALID BIT(0) #define P2F_RG_FRCK_EN BIT(8) -#define U3P_REF_CLK 26 /* MHZ */ -#define U3P_SLEW_RATE_COEF 28 #define U3P_SR_COEF_DIVISOR 1000 #define U3P_FM_DET_CYCLE_CNT 1024 @@ -277,20 +275,24 @@ enum mtk_phy_version { MTK_PHY_V3, }; +/** + * mtk_phy_pdata - SoC specific platform data + * @avoid_rx_sen_degradation: Avoid TX Sensitivity level degradation (MT6795/8173 only) + * @sw_pll_48m_to_26m: Workaround for V3 IP (MT8195) - switch the 48MHz PLL from + * fractional mode to integer to output 26MHz for U2PHY + * @sw_efuse_supported: Switches off eFuse auto-load from PHY and applies values + * read from different nvmem (usually different eFuse array) + * that is pointed at in the device tree node for this PHY + * @slew_ref_clk_mhz: Default reference clock (in MHz) for slew rate calibration + * @slew_rate_coefficient: Coefficient for slew rate calibration + * @version: PHY IP Version + */ struct mtk_phy_pdata { - /* avoid RX sensitivity level degradation only for mt8173 */ bool avoid_rx_sen_degradation; - /* - * workaround only for mt8195, HW fix it for others of V3, - * u2phy should use integer mode instead of fractional mode of - * 48M PLL, fix it by switching PLL to 26M from default 48M - */ bool sw_pll_48m_to_26m; - /* - * Some SoCs (e.g. mt8195) drop a bit when use auto load efuse, - * support sw way, also support it for v2/v3 optionally. - */ bool sw_efuse_supported; + u8 slew_ref_clock_mhz; + u8 slew_rate_coefficient; enum mtk_phy_version version; }; @@ -686,12 +688,14 @@ static void hs_slew_rate_calibrate(struct mtk_tphy *tphy, int fm_out; u32 tmp; - /* HW V3 doesn't support slew rate cal anymore */ - if (tphy->pdata->version == MTK_PHY_V3) - return; - - /* use force value */ - if (instance->eye_src) + /* + * If a fixed HS slew rate (EYE) value was supplied, don't run the + * calibration sequence and prefer using that value instead; also, + * if there is no reference clock for slew calibration or there is + * no slew coefficient, this means that the slew rate calibration + * sequence is not supported. + */ + if (instance->eye_src || !tphy->src_ref_clk || !tphy->src_coef) return; /* enable USB ring oscillator */ @@ -1516,12 +1520,16 @@ static const struct phy_ops mtk_tphy_ops = { static const struct mtk_phy_pdata tphy_v1_pdata = { .avoid_rx_sen_degradation = false, + .slew_ref_clock_mhz = 26, + .slew_rate_coefficient = 28, .version = MTK_PHY_V1, }; static const struct mtk_phy_pdata tphy_v2_pdata = { .avoid_rx_sen_degradation = false, .sw_efuse_supported = true, + .slew_ref_clock_mhz = 26, + .slew_rate_coefficient = 28, .version = MTK_PHY_V2, }; @@ -1532,6 +1540,8 @@ static const struct mtk_phy_pdata tphy_v3_pdata = { static const struct mtk_phy_pdata mt8173_pdata = { .avoid_rx_sen_degradation = true, + .slew_ref_clock_mhz = 26, + .slew_rate_coefficient = 28, .version = MTK_PHY_V1, }; @@ -1561,7 +1571,7 @@ static int mtk_tphy_probe(struct platform_device *pdev) struct resource *sif_res; struct mtk_tphy *tphy; struct resource res; - int port; + int port, ret; tphy = devm_kzalloc(dev, sizeof(*tphy), GFP_KERNEL); if (!tphy) @@ -1591,15 +1601,14 @@ static int mtk_tphy_probe(struct platform_device *pdev) } } - if (tphy->pdata->version < MTK_PHY_V3) { - tphy->src_ref_clk = U3P_REF_CLK; - tphy->src_coef = U3P_SLEW_RATE_COEF; - /* update parameters of slew rate calibrate if exist */ - device_property_read_u32(dev, "mediatek,src-ref-clk-mhz", - &tphy->src_ref_clk); - device_property_read_u32(dev, "mediatek,src-coef", - &tphy->src_coef); - } + /* Optional properties for slew calibration variation */ + ret = device_property_read_u32(dev, "mediatek,src-ref-clk-mhz", &tphy->src_ref_clk); + if (ret) + tphy->src_ref_clk = tphy->pdata->slew_ref_clock_mhz; + + ret = device_property_read_u32(dev, "mediatek,src-coef", &tphy->src_coef); + if (ret) + tphy->src_coef = tphy->pdata->slew_rate_coefficient; port = 0; for_each_child_of_node_scoped(np, child_np) { diff --git a/drivers/phy/phy-snps-eusb2.c b/drivers/phy/phy-snps-eusb2.c index 751b6d8ba2be..f90bf7e95463 100644 --- a/drivers/phy/phy-snps-eusb2.c +++ b/drivers/phy/phy-snps-eusb2.c @@ -256,7 +256,7 @@ static int exynos_eusb2_ref_clk_init(struct snps_eusb2_hsphy *phy) } if (!config) { - dev_err(&phy->phy->dev, "unsupported ref_clk_freq:%lu\n", ref_clk_freq); + dev_err(&phy->phy->dev, "unsupported ref_clk_freq: %lu\n", ref_clk_freq); return -EINVAL; } @@ -293,7 +293,7 @@ static int qcom_eusb2_ref_clk_init(struct snps_eusb2_hsphy *phy) } if (!config) { - dev_err(&phy->phy->dev, "unsupported ref_clk_freq:%lu\n", ref_clk_freq); + dev_err(&phy->phy->dev, "unsupported ref_clk_freq: %lu\n", ref_clk_freq); return -EINVAL; } @@ -392,7 +392,7 @@ static int qcom_snps_eusb2_hsphy_init(struct phy *p) snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG_CTRL_1, PHY_CFG_PLL_CPBIAS_CNTRL_MASK, - FIELD_PREP(PHY_CFG_PLL_CPBIAS_CNTRL_MASK, 0x1)); + FIELD_PREP(PHY_CFG_PLL_CPBIAS_CNTRL_MASK, 0x0)); snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG_CTRL_4, PHY_CFG_PLL_INT_CNTRL_MASK, @@ -437,6 +437,9 @@ static int qcom_snps_eusb2_hsphy_init(struct phy *p) snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N_SEL, 0); + snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG0, + CMN_CTRL_OVERRIDE_EN, 0); + return 0; } @@ -461,39 +464,40 @@ static int snps_eusb2_hsphy_init(struct phy *p) ret = phy_init(phy->repeater); if (ret) { - dev_err(&p->dev, "repeater init failed. %d\n", ret); + dev_err(&p->dev, "repeater init failed: %d\n", ret); goto disable_vreg; } ret = clk_bulk_prepare_enable(phy->data->num_clks, phy->clks); if (ret) { - dev_err(&p->dev, "failed to enable ref clock, %d\n", ret); - goto disable_vreg; + dev_err(&p->dev, "failed to enable ref clock: %d\n", ret); + goto exit_repeater; } ret = reset_control_assert(phy->phy_reset); if (ret) { - dev_err(&p->dev, "failed to assert phy_reset, %d\n", ret); - goto disable_ref_clk; + dev_err(&p->dev, "failed to assert phy_reset: %d\n", ret); + goto disable_clks; } usleep_range(100, 150); ret = reset_control_deassert(phy->phy_reset); if (ret) { - dev_err(&p->dev, "failed to de-assert phy_reset, %d\n", ret); - goto disable_ref_clk; + dev_err(&p->dev, "failed to de-assert phy_reset: %d\n", ret); + goto disable_clks; } ret = phy->data->phy_init(p); if (ret) - goto disable_ref_clk; + goto disable_clks; return 0; -disable_ref_clk: +disable_clks: clk_bulk_disable_unprepare(phy->data->num_clks, phy->clks); - +exit_repeater: + phy_exit(phy->repeater); disable_vreg: regulator_bulk_disable(ARRAY_SIZE(phy->vregs), phy->vregs); @@ -504,7 +508,7 @@ static int snps_eusb2_hsphy_exit(struct phy *p) { struct snps_eusb2_hsphy *phy = phy_get_drvdata(p); - clk_disable_unprepare(phy->ref_clk); + clk_bulk_disable_unprepare(phy->data->num_clks, phy->clks); regulator_bulk_disable(ARRAY_SIZE(phy->vregs), phy->vregs); @@ -551,7 +555,7 @@ static int snps_eusb2_hsphy_probe(struct platform_device *pdev) if (!phy->clks) return -ENOMEM; - for (int i = 0; i < phy->data->num_clks; ++i) + for (i = 0; i < phy->data->num_clks; ++i) phy->clks[i].id = phy->data->clk_names[i]; ret = devm_clk_bulk_get(dev, phy->data->num_clks, phy->clks); @@ -560,7 +564,7 @@ static int snps_eusb2_hsphy_probe(struct platform_device *pdev) "failed to get phy clock(s)\n"); phy->ref_clk = NULL; - for (int i = 0; i < phy->data->num_clks; ++i) { + for (i = 0; i < phy->data->num_clks; ++i) { if (!strcmp(phy->clks[i].id, "ref")) { phy->ref_clk = phy->clks[i].clk; break; @@ -582,14 +586,14 @@ static int snps_eusb2_hsphy_probe(struct platform_device *pdev) return dev_err_probe(dev, ret, "failed to get regulator supplies\n"); - phy->repeater = devm_of_phy_optional_get(dev, np, 0); + phy->repeater = devm_of_phy_optional_get(dev, np, NULL); if (IS_ERR(phy->repeater)) return dev_err_probe(dev, PTR_ERR(phy->repeater), "failed to get repeater\n"); generic_phy = devm_phy_create(dev, NULL, &snps_eusb2_hsphy_ops); if (IS_ERR(generic_phy)) { - dev_err(dev, "failed to create phy %d\n", ret); + dev_err(dev, "failed to create phy: %d\n", ret); return PTR_ERR(generic_phy); } @@ -600,8 +604,6 @@ static int snps_eusb2_hsphy_probe(struct platform_device *pdev) if (IS_ERR(phy_provider)) return PTR_ERR(phy_provider); - dev_info(dev, "Registered Snps-eUSB2 phy\n"); - return 0; } @@ -612,7 +614,9 @@ static const struct of_device_id snps_eusb2_hsphy_of_match_table[] = { }, { .compatible = "samsung,exynos2200-eusb2-phy", .data = &exynos2200_snps_eusb2_phy, - }, { }, + }, { + /* sentinel */ + } }; MODULE_DEVICE_TABLE(of, snps_eusb2_hsphy_of_match_table); diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index ef14f4e33973..60a0ead127fa 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -126,12 +126,12 @@ config PHY_QCOM_QUSB2 USB IPs on MSM SOCs. config PHY_QCOM_EUSB2_REPEATER - tristate "Qualcomm SNPS eUSB2 Repeater Driver" + tristate "Qualcomm PMIC eUSB2 Repeater Driver" depends on OF && (ARCH_QCOM || COMPILE_TEST) select GENERIC_PHY help - Enable support for the USB high-speed SNPS eUSB2 repeater on Qualcomm - PMICs. The repeater is paired with a Synopsys eUSB2 Phy + Enable support for the USB high-speed eUSB2 repeater on Qualcomm + PMICs. The repeater is paired with a Synopsys or M31 eUSB2 Phy on Qualcomm SOCs. config PHY_QCOM_M31_USB @@ -158,6 +158,16 @@ config PHY_QCOM_UNIPHY_PCIE_28LP handles PHY initialization, clock management required after resetting the hardware and power management. +config PHY_QCOM_M31_EUSB + tristate "Qualcomm M31 eUSB2 PHY driver support" + depends on USB && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable this to support M31 EUSB2 PHY transceivers on Qualcomm + chips with DWC3 USB core. It supports initializing and cleaning + up of the associated USB repeater that is paired with the eUSB2 + PHY. + config PHY_QCOM_USB_HS tristate "Qualcomm USB HS PHY module" depends on USB_ULPI_BUS diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index 3851e28a212d..b71a6a0bed3f 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_PHY_QCOM_EDP) += phy-qcom-edp.o obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o obj-$(CONFIG_PHY_QCOM_M31_USB) += phy-qcom-m31.o +obj-$(CONFIG_PHY_QCOM_M31_EUSB) += phy-qcom-m31-eusb2.o obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o obj-$(CONFIG_PHY_QCOM_QMP_COMBO) += phy-qcom-qmp-combo.o phy-qcom-qmp-usbc.o diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c index 6bd1b3c75c77..e0f2acc8109c 100644 --- a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c +++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c @@ -37,32 +37,13 @@ #define EUSB2_TUNE_EUSB_EQU 0x5A #define EUSB2_TUNE_EUSB_HS_COMP_CUR 0x5B -enum eusb2_reg_layout { - TUNE_EUSB_HS_COMP_CUR, - TUNE_EUSB_EQU, - TUNE_EUSB_SLEW, - TUNE_USB2_HS_COMP_CUR, - TUNE_USB2_PREEM, - TUNE_USB2_EQU, - TUNE_USB2_SLEW, - TUNE_SQUELCH_U, - TUNE_HSDISC, - TUNE_RES_FSDIF, - TUNE_IUSB2, - TUNE_USB2_CROSSOVER, - NUM_TUNE_FIELDS, - - FORCE_VAL_5 = NUM_TUNE_FIELDS, - FORCE_EN_5, - - EN_CTL1, - - RPTR_STATUS, - LAYOUT_SIZE, +struct eusb2_repeater_init_tbl_reg { + unsigned int reg; + unsigned int value; }; struct eusb2_repeater_cfg { - const u32 *init_tbl; + const struct eusb2_repeater_init_tbl_reg *init_tbl; int init_tbl_num; const char * const *vreg_list; int num_vregs; @@ -82,16 +63,16 @@ static const char * const pm8550b_vreg_l[] = { "vdd18", "vdd3", }; -static const u32 pm8550b_init_tbl[NUM_TUNE_FIELDS] = { - [TUNE_IUSB2] = 0x8, - [TUNE_SQUELCH_U] = 0x3, - [TUNE_USB2_PREEM] = 0x5, +static const struct eusb2_repeater_init_tbl_reg pm8550b_init_tbl[] = { + { EUSB2_TUNE_IUSB2, 0x8 }, + { EUSB2_TUNE_SQUELCH_U, 0x3 }, + { EUSB2_TUNE_USB2_PREEM, 0x5 }, }; -static const u32 smb2360_init_tbl[NUM_TUNE_FIELDS] = { - [TUNE_IUSB2] = 0x5, - [TUNE_SQUELCH_U] = 0x3, - [TUNE_USB2_PREEM] = 0x2, +static const struct eusb2_repeater_init_tbl_reg smb2360_init_tbl[] = { + { EUSB2_TUNE_IUSB2, 0x5 }, + { EUSB2_TUNE_SQUELCH_U, 0x3 }, + { EUSB2_TUNE_USB2_PREEM, 0x2 }, }; static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = { @@ -129,17 +110,10 @@ static int eusb2_repeater_init(struct phy *phy) struct eusb2_repeater *rptr = phy_get_drvdata(phy); struct device_node *np = rptr->dev->of_node; struct regmap *regmap = rptr->regmap; - const u32 *init_tbl = rptr->cfg->init_tbl; - u8 tune_usb2_preem = init_tbl[TUNE_USB2_PREEM]; - u8 tune_hsdisc = init_tbl[TUNE_HSDISC]; - u8 tune_iusb2 = init_tbl[TUNE_IUSB2]; u32 base = rptr->base; - u32 val; + u32 poll_val; int ret; - - of_property_read_u8(np, "qcom,tune-usb2-amplitude", &tune_iusb2); - of_property_read_u8(np, "qcom,tune-usb2-disc-thres", &tune_hsdisc); - of_property_read_u8(np, "qcom,tune-usb2-preem", &tune_usb2_preem); + u8 val; ret = regulator_bulk_enable(rptr->cfg->num_vregs, rptr->vregs); if (ret) @@ -147,21 +121,24 @@ static int eusb2_repeater_init(struct phy *phy) regmap_write(regmap, base + EUSB2_EN_CTL1, EUSB2_RPTR_EN); - regmap_write(regmap, base + EUSB2_TUNE_EUSB_HS_COMP_CUR, init_tbl[TUNE_EUSB_HS_COMP_CUR]); - regmap_write(regmap, base + EUSB2_TUNE_EUSB_EQU, init_tbl[TUNE_EUSB_EQU]); - regmap_write(regmap, base + EUSB2_TUNE_EUSB_SLEW, init_tbl[TUNE_EUSB_SLEW]); - regmap_write(regmap, base + EUSB2_TUNE_USB2_HS_COMP_CUR, init_tbl[TUNE_USB2_HS_COMP_CUR]); - regmap_write(regmap, base + EUSB2_TUNE_USB2_EQU, init_tbl[TUNE_USB2_EQU]); - regmap_write(regmap, base + EUSB2_TUNE_USB2_SLEW, init_tbl[TUNE_USB2_SLEW]); - regmap_write(regmap, base + EUSB2_TUNE_SQUELCH_U, init_tbl[TUNE_SQUELCH_U]); - regmap_write(regmap, base + EUSB2_TUNE_RES_FSDIF, init_tbl[TUNE_RES_FSDIF]); - regmap_write(regmap, base + EUSB2_TUNE_USB2_CROSSOVER, init_tbl[TUNE_USB2_CROSSOVER]); - - regmap_write(regmap, base + EUSB2_TUNE_USB2_PREEM, tune_usb2_preem); - regmap_write(regmap, base + EUSB2_TUNE_HSDISC, tune_hsdisc); - regmap_write(regmap, base + EUSB2_TUNE_IUSB2, tune_iusb2); - - ret = regmap_read_poll_timeout(regmap, base + EUSB2_RPTR_STATUS, val, val & RPTR_OK, 10, 5); + /* Write registers from init table */ + for (int i = 0; i < rptr->cfg->init_tbl_num; i++) + regmap_write(regmap, base + rptr->cfg->init_tbl[i].reg, + rptr->cfg->init_tbl[i].value); + + /* Override registers from devicetree values */ + if (!of_property_read_u8(np, "qcom,tune-usb2-amplitude", &val)) + regmap_write(regmap, base + EUSB2_TUNE_USB2_PREEM, val); + + if (!of_property_read_u8(np, "qcom,tune-usb2-disc-thres", &val)) + regmap_write(regmap, base + EUSB2_TUNE_HSDISC, val); + + if (!of_property_read_u8(np, "qcom,tune-usb2-preem", &val)) + regmap_write(regmap, base + EUSB2_TUNE_IUSB2, val); + + /* Wait for status OK */ + ret = regmap_read_poll_timeout(regmap, base + EUSB2_RPTR_STATUS, poll_val, + poll_val & RPTR_OK, 10, 5); if (ret) dev_err(rptr->dev, "initialization timed-out\n"); @@ -264,8 +241,6 @@ static int eusb2_repeater_probe(struct platform_device *pdev) if (IS_ERR(phy_provider)) return PTR_ERR(phy_provider); - dev_info(dev, "Registered Qcom-eUSB2 repeater\n"); - return 0; } diff --git a/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c new file mode 100644 index 000000000000..bf32572566c4 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/reset.h> +#include <linux/slab.h> + +#include <linux/regulator/consumer.h> + +#define USB_PHY_UTMI_CTRL0 (0x3c) +#define SLEEPM BIT(0) + +#define USB_PHY_UTMI_CTRL5 (0x50) +#define POR BIT(1) + +#define USB_PHY_HS_PHY_CTRL_COMMON0 (0x54) +#define SIDDQ_SEL BIT(1) +#define SIDDQ BIT(2) +#define FSEL GENMASK(6, 4) +#define FSEL_38_4_MHZ_VAL (0x6) + +#define USB_PHY_HS_PHY_CTRL2 (0x64) +#define USB2_SUSPEND_N BIT(2) +#define USB2_SUSPEND_N_SEL BIT(3) + +#define USB_PHY_CFG0 (0x94) +#define UTMI_PHY_CMN_CTRL_OVERRIDE_EN BIT(1) + +#define USB_PHY_CFG1 (0x154) +#define PLL_EN BIT(0) + +#define USB_PHY_FSEL_SEL (0xb8) +#define FSEL_SEL BIT(0) + +#define USB_PHY_XCFGI_39_32 (0x16c) +#define HSTX_PE GENMASK(3, 2) + +#define USB_PHY_XCFGI_71_64 (0x17c) +#define HSTX_SWING GENMASK(3, 0) + +#define USB_PHY_XCFGI_31_24 (0x168) +#define HSTX_SLEW GENMASK(2, 0) + +#define USB_PHY_XCFGI_7_0 (0x15c) +#define PLL_LOCK_TIME GENMASK(1, 0) + +#define M31_EUSB_PHY_INIT_CFG(o, b, v) \ +{ \ + .off = o, \ + .mask = b, \ + .val = v, \ +} + +struct m31_phy_tbl_entry { + u32 off; + u32 mask; + u32 val; +}; + +struct m31_eusb2_priv_data { + const struct m31_phy_tbl_entry *setup_seq; + unsigned int setup_seq_nregs; + const struct m31_phy_tbl_entry *override_seq; + unsigned int override_seq_nregs; + const struct m31_phy_tbl_entry *reset_seq; + unsigned int reset_seq_nregs; + unsigned int fsel; +}; + +static const struct m31_phy_tbl_entry m31_eusb2_setup_tbl[] = { + M31_EUSB_PHY_INIT_CFG(USB_PHY_CFG0, UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_UTMI_CTRL5, POR, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_CFG1, PLL_EN, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_FSEL_SEL, FSEL_SEL, 1), +}; + +static const struct m31_phy_tbl_entry m31_eusb_phy_override_tbl[] = { + M31_EUSB_PHY_INIT_CFG(USB_PHY_XCFGI_39_32, HSTX_PE, 0), + M31_EUSB_PHY_INIT_CFG(USB_PHY_XCFGI_71_64, HSTX_SWING, 7), + M31_EUSB_PHY_INIT_CFG(USB_PHY_XCFGI_31_24, HSTX_SLEW, 0), + M31_EUSB_PHY_INIT_CFG(USB_PHY_XCFGI_7_0, PLL_LOCK_TIME, 0), +}; + +static const struct m31_phy_tbl_entry m31_eusb_phy_reset_tbl[] = { + M31_EUSB_PHY_INIT_CFG(USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N_SEL, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_UTMI_CTRL0, SLEEPM, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_HS_PHY_CTRL_COMMON0, SIDDQ_SEL, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_HS_PHY_CTRL_COMMON0, SIDDQ, 0), + M31_EUSB_PHY_INIT_CFG(USB_PHY_UTMI_CTRL5, POR, 0), + M31_EUSB_PHY_INIT_CFG(USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N_SEL, 0), + M31_EUSB_PHY_INIT_CFG(USB_PHY_CFG0, UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0), +}; + +static const struct regulator_bulk_data m31_eusb_phy_vregs[] = { + { .supply = "vdd" }, + { .supply = "vdda12" }, +}; + +#define M31_EUSB_NUM_VREGS ARRAY_SIZE(m31_eusb_phy_vregs) + +struct m31eusb2_phy { + struct phy *phy; + void __iomem *base; + const struct m31_eusb2_priv_data *data; + enum phy_mode mode; + + struct regulator_bulk_data *vregs; + struct clk *clk; + struct reset_control *reset; + + struct phy *repeater; +}; + +static int m31eusb2_phy_write_readback(void __iomem *base, u32 offset, + const u32 mask, u32 val) +{ + u32 write_val; + u32 tmp; + + tmp = readl(base + offset); + tmp &= ~mask; + write_val = tmp | val; + + writel(write_val, base + offset); + + tmp = readl(base + offset); + tmp &= mask; + + if (tmp != val) { + pr_err("write: %x to offset: %x FAILED\n", val, offset); + return -EINVAL; + } + + return 0; +} + +static int m31eusb2_phy_write_sequence(struct m31eusb2_phy *phy, + const struct m31_phy_tbl_entry *tbl, + int num) +{ + int i; + int ret; + + for (i = 0 ; i < num; i++, tbl++) { + dev_dbg(&phy->phy->dev, "Offset:%x BitMask:%x Value:%x", + tbl->off, tbl->mask, tbl->val); + + ret = m31eusb2_phy_write_readback(phy->base, + tbl->off, tbl->mask, + tbl->val << __ffs(tbl->mask)); + if (ret < 0) + return ret; + } + + return 0; +} + +static int m31eusb2_phy_set_mode(struct phy *uphy, enum phy_mode mode, int submode) +{ + struct m31eusb2_phy *phy = phy_get_drvdata(uphy); + + phy->mode = mode; + + return phy_set_mode_ext(phy->repeater, mode, submode); +} + +static int m31eusb2_phy_init(struct phy *uphy) +{ + struct m31eusb2_phy *phy = phy_get_drvdata(uphy); + const struct m31_eusb2_priv_data *data = phy->data; + int ret; + + ret = regulator_bulk_enable(M31_EUSB_NUM_VREGS, phy->vregs); + if (ret) { + dev_err(&uphy->dev, "failed to enable regulator, %d\n", ret); + return ret; + } + + ret = phy_init(phy->repeater); + if (ret) { + dev_err(&uphy->dev, "repeater init failed. %d\n", ret); + goto disable_vreg; + } + + ret = clk_prepare_enable(phy->clk); + if (ret) { + dev_err(&uphy->dev, "failed to enable cfg ahb clock, %d\n", ret); + goto disable_repeater; + } + + /* Perform phy reset */ + reset_control_assert(phy->reset); + udelay(5); + reset_control_deassert(phy->reset); + + m31eusb2_phy_write_sequence(phy, data->setup_seq, data->setup_seq_nregs); + m31eusb2_phy_write_readback(phy->base, + USB_PHY_HS_PHY_CTRL_COMMON0, FSEL, + FIELD_PREP(FSEL, data->fsel)); + m31eusb2_phy_write_sequence(phy, data->override_seq, data->override_seq_nregs); + m31eusb2_phy_write_sequence(phy, data->reset_seq, data->reset_seq_nregs); + + return 0; + +disable_repeater: + phy_exit(phy->repeater); +disable_vreg: + regulator_bulk_disable(M31_EUSB_NUM_VREGS, phy->vregs); + + return 0; +} + +static int m31eusb2_phy_exit(struct phy *uphy) +{ + struct m31eusb2_phy *phy = phy_get_drvdata(uphy); + + clk_disable_unprepare(phy->clk); + regulator_bulk_disable(M31_EUSB_NUM_VREGS, phy->vregs); + phy_exit(phy->repeater); + + return 0; +} + +static const struct phy_ops m31eusb2_phy_gen_ops = { + .init = m31eusb2_phy_init, + .exit = m31eusb2_phy_exit, + .set_mode = m31eusb2_phy_set_mode, + .owner = THIS_MODULE, +}; + +static int m31eusb2_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + const struct m31_eusb2_priv_data *data; + struct device *dev = &pdev->dev; + struct m31eusb2_phy *phy; + int ret; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + data = device_get_match_data(dev); + if (!data) + return -EINVAL; + phy->data = data; + + phy->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy->base)) + return PTR_ERR(phy->base); + + phy->reset = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(phy->reset)) + return PTR_ERR(phy->reset); + + phy->clk = devm_clk_get(dev, NULL); + if (IS_ERR(phy->clk)) + return dev_err_probe(dev, PTR_ERR(phy->clk), + "failed to get clk\n"); + + phy->phy = devm_phy_create(dev, NULL, &m31eusb2_phy_gen_ops); + if (IS_ERR(phy->phy)) + return dev_err_probe(dev, PTR_ERR(phy->phy), + "failed to create phy\n"); + + ret = devm_regulator_bulk_get_const(dev, M31_EUSB_NUM_VREGS, + m31_eusb_phy_vregs, &phy->vregs); + if (ret) + return dev_err_probe(dev, ret, + "failed to get regulator supplies\n"); + + phy_set_drvdata(phy->phy, phy); + + phy->repeater = devm_of_phy_get_by_index(dev, dev->of_node, 0); + if (IS_ERR(phy->repeater)) + return dev_err_probe(dev, PTR_ERR(phy->repeater), + "failed to get repeater\n"); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct m31_eusb2_priv_data m31_eusb_v1_data = { + .setup_seq = m31_eusb2_setup_tbl, + .setup_seq_nregs = ARRAY_SIZE(m31_eusb2_setup_tbl), + .override_seq = m31_eusb_phy_override_tbl, + .override_seq_nregs = ARRAY_SIZE(m31_eusb_phy_override_tbl), + .reset_seq = m31_eusb_phy_reset_tbl, + .reset_seq_nregs = ARRAY_SIZE(m31_eusb_phy_reset_tbl), + .fsel = FSEL_38_4_MHZ_VAL, +}; + +static const struct of_device_id m31eusb2_phy_id_table[] = { + { .compatible = "qcom,sm8750-m31-eusb2-phy", .data = &m31_eusb_v1_data }, + { }, +}; +MODULE_DEVICE_TABLE(of, m31eusb2_phy_id_table); + +static struct platform_driver m31eusb2_phy_driver = { + .probe = m31eusb2_phy_probe, + .driver = { + .name = "qcom-m31eusb2-phy", + .of_match_table = m31eusb2_phy_id_table, + }, +}; + +module_platform_driver(m31eusb2_phy_driver); + +MODULE_AUTHOR("Wesley Cheng <quic_wcheng@quicinc.com>"); +MODULE_DESCRIPTION("eUSB2 Qualcomm M31 HSPHY driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/phy/qualcomm/phy-qcom-m31.c b/drivers/phy/qualcomm/phy-qcom-m31.c index 20d4c020a83c..168ea980fda0 100644 --- a/drivers/phy/qualcomm/phy-qcom-m31.c +++ b/drivers/phy/qualcomm/phy-qcom-m31.c @@ -58,14 +58,16 @@ #define USB2_0_TX_ENABLE BIT(2) #define USB2PHY_USB_PHY_M31_XCFGI_4 0xc8 - #define HSTX_SLEW_RATE_565PS GENMASK(1, 0) + #define HSTX_SLEW_RATE_400PS GENMASK(2, 0) #define PLL_CHARGING_PUMP_CURRENT_35UA GENMASK(4, 3) #define ODT_VALUE_38_02_OHM GENMASK(7, 6) #define USB2PHY_USB_PHY_M31_XCFGI_5 0xcc - #define ODT_VALUE_45_02_OHM BIT(2) #define HSTX_PRE_EMPHASIS_LEVEL_0_55MA BIT(0) +#define USB2PHY_USB_PHY_M31_XCFGI_9 0xdc + #define HSTX_CURRENT_17_1MA_385MV BIT(1) + #define USB2PHY_USB_PHY_M31_XCFGI_11 0xe4 #define XCFG_COARSE_TUNE_NUM BIT(1) #define XCFG_FINE_TUNE_NUM BIT(3) @@ -164,7 +166,7 @@ static struct m31_phy_regs m31_ipq5332_regs[] = { }, { USB2PHY_USB_PHY_M31_XCFGI_4, - HSTX_SLEW_RATE_565PS | PLL_CHARGING_PUMP_CURRENT_35UA | ODT_VALUE_38_02_OHM, + HSTX_SLEW_RATE_400PS | PLL_CHARGING_PUMP_CURRENT_35UA | ODT_VALUE_38_02_OHM, 0 }, { @@ -174,10 +176,14 @@ static struct m31_phy_regs m31_ipq5332_regs[] = { }, { USB2PHY_USB_PHY_M31_XCFGI_5, - ODT_VALUE_45_02_OHM | HSTX_PRE_EMPHASIS_LEVEL_0_55MA, + HSTX_PRE_EMPHASIS_LEVEL_0_55MA, 4 }, { + USB2PHY_USB_PHY_M31_XCFGI_9, + HSTX_CURRENT_17_1MA_385MV, + }, + { USB_PHY_UTMI_CTRL5, 0x0, 0 @@ -305,8 +311,6 @@ static int m31usb_phy_probe(struct platform_device *pdev) phy_set_drvdata(qphy->phy, qphy); phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); - if (!IS_ERR(phy_provider)) - dev_info(dev, "Registered M31 USB phy\n"); return PTR_ERR_OR_ZERO(phy_provider); } diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c index b09fa00e9fe7..f07d097b129f 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c @@ -32,6 +32,7 @@ #include "phy-qcom-qmp-pcs-usb-v4.h" #include "phy-qcom-qmp-pcs-usb-v5.h" #include "phy-qcom-qmp-pcs-usb-v6.h" +#include "phy-qcom-qmp-pcs-usb-v8.h" #include "phy-qcom-qmp-dp-com-v3.h" @@ -212,6 +213,31 @@ static const unsigned int qmp_v6_n4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { [QPHY_TX_TRANSCEIVER_BIAS_EN] = QSERDES_V6_N4_TX_TRANSCEIVER_BIAS_EN, }; +static const unsigned int qmp_v8_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { + [QPHY_SW_RESET] = QPHY_V8_PCS_SW_RESET, + [QPHY_START_CTRL] = QPHY_V8_PCS_START_CONTROL, + [QPHY_PCS_STATUS] = QPHY_V8_PCS_PCS_STATUS1, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V8_PCS_POWER_DOWN_CONTROL, + + /* In PCS_USB */ + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V8_PCS_USB_AUTONOMOUS_MODE_CTRL, + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V8_PCS_USB_LFPS_RXTERM_IRQ_CLEAR, + + [QPHY_COM_RESETSM_CNTRL] = QSERDES_V8_COM_RESETSM_CNTRL, + [QPHY_COM_C_READY_STATUS] = QSERDES_V8_COM_C_READY_STATUS, + [QPHY_COM_CMN_STATUS] = QSERDES_V8_COM_CMN_STATUS, + [QPHY_COM_BIAS_EN_CLKBUFLR_EN] = QSERDES_V8_COM_BIAS_EN_CLKBUFLR_EN, + + [QPHY_DP_PHY_STATUS] = QSERDES_V6_DP_PHY_STATUS, + [QPHY_DP_PHY_VCO_DIV] = QSERDES_V6_DP_PHY_VCO_DIV, + + [QPHY_TX_TX_POL_INV] = QSERDES_V8_TX_TX_POL_INV, + [QPHY_TX_TX_DRV_LVL] = QSERDES_V8_TX_TX_DRV_LVL, + [QPHY_TX_TX_EMP_POST1_LVL] = QSERDES_V8_TX_TX_EMP_POST1_LVL, + [QPHY_TX_HIGHZ_DRVR_EN] = QSERDES_V8_TX_HIGHZ_DRVR_EN, + [QPHY_TX_TRANSCEIVER_BIAS_EN] = QSERDES_V8_TX_TRANSCEIVER_BIAS_EN, +}; + static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07), QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14), @@ -1471,6 +1497,139 @@ static const struct qmp_phy_init_tbl x1e80100_usb43dp_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V6_N4_PCS_EQ_CONFIG5, 0x10), }; +static const struct qmp_phy_init_tbl sm8750_usb3_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V8_COM_SSC_STEP_SIZE1_MODE1, 0xc0), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_SSC_STEP_SIZE2_MODE1, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_CP_CTRL_MODE1, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_PLL_RCTRL_MODE1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_PLL_CCTRL_MODE1, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_CORECLK_DIV_MODE1, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_LOCK_CMP1_MODE1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_LOCK_CMP2_MODE1, 0x41), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_DEC_START_MODE1, 0x41), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_DEC_START_MSB_MODE1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_DIV_FRAC_START1_MODE1, 0x55), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_DIV_FRAC_START2_MODE1, 0x75), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_DIV_FRAC_START3_MODE1, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_HSCLK_SEL_1, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_VCO_TUNE1_MODE1, 0x25), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_VCO_TUNE2_MODE1, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0x5c), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x5c), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_SSC_STEP_SIZE1_MODE0, 0xc0), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_SSC_STEP_SIZE2_MODE0, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_CP_CTRL_MODE0, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_LOCK_CMP1_MODE0, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_LOCK_CMP2_MODE0, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_DEC_START_MODE0, 0x41), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_DEC_START_MSB_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_DIV_FRAC_START1_MODE0, 0x55), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_DIV_FRAC_START2_MODE0, 0x75), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_DIV_FRAC_START3_MODE0, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_VCO_TUNE1_MODE0, 0x25), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_VCO_TUNE2_MODE0, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_BG_TIMER, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_SSC_PER1, 0x62), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_SSC_PER2, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_SYSCLK_BUF_ENABLE, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_SYSCLK_EN_SEL, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_LOCK_CMP_CFG, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_VCO_TUNE_MAP, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_CORE_CLK_EN, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_CMN_CONFIG_1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_AUTO_GAIN_ADJ_CTRL_1, 0xb6), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_AUTO_GAIN_ADJ_CTRL_2, 0x4a), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_AUTO_GAIN_ADJ_CTRL_3, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V8_COM_ADDITIONAL_MISC, 0x0c), +}; + +static const struct qmp_phy_init_tbl sm8750_usb3_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V8_TX_RES_CODE_LANE_TX, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V8_TX_RES_CODE_LANE_RX, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V8_TX_RES_CODE_LANE_OFFSET_TX, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V8_TX_RES_CODE_LANE_OFFSET_RX, 0x09), + QMP_PHY_INIT_CFG(QSERDES_V8_TX_LANE_MODE_1, 0xf5), + QMP_PHY_INIT_CFG(QSERDES_V8_TX_LANE_MODE_3, 0x11), + QMP_PHY_INIT_CFG(QSERDES_V8_TX_LANE_MODE_4, 0x31), + QMP_PHY_INIT_CFG(QSERDES_V8_TX_LANE_MODE_5, 0x5f), + QMP_PHY_INIT_CFG(QSERDES_V8_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG_LANE(QSERDES_V8_TX_PI_QEC_CTRL, 0x21, 1), + QMP_PHY_INIT_CFG_LANE(QSERDES_V8_TX_PI_QEC_CTRL, 0x05, 2), +}; + +static const struct qmp_phy_init_tbl sm8750_usb3_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V8_RX_UCDR_FO_GAIN, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_UCDR_SO_GAIN, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_UCDR_PI_CONTROLS, 0x99), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_UCDR_SB2_THRESH1, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_UCDR_SB2_THRESH2, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_UCDR_SB2_GAIN1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_UCDR_SB2_GAIN2, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_AUX_DATA_TCOARSE_TFINE, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_VGA_CAL_CNTRL1, 0x54), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_VGA_CAL_CNTRL2, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_GM_CAL, 0x13), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_RX_IDAC_TSETTLE_LOW, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_RX_IDAC_TSETTLE_HIGH, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x27), + + QMP_PHY_INIT_CFG(QSERDES_V8_RX_SIGDET_ENABLES, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_SIGDET_CNTRL, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_SIGDET_DEGLITCH_CNTRL, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_RX_MODE_00_LOW, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_RX_MODE_00_HIGH, 0xbf), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_RX_MODE_00_HIGH2, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_RX_MODE_00_HIGH3, 0xdf), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_RX_MODE_00_HIGH4, 0xed), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_RX_MODE_01_LOW, 0x19), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_RX_MODE_01_HIGH, 0x09), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_RX_MODE_01_HIGH2, 0x91), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_RX_MODE_01_HIGH3, 0xb7), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_RX_MODE_01_HIGH4, 0xaa), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_DFE_EN_TIMER, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_DCC_CTRL1, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_VTH_CODE, 0x10), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_SIGDET_CAL_CTRL1, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V8_RX_SIGDET_CAL_TRIM, 0x08), +}; + +static const struct qmp_phy_init_tbl sm8750_usb3_pcs_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V8_PCS_LOCK_DETECT_CONFIG1, 0xc4), + QMP_PHY_INIT_CFG(QPHY_V8_PCS_LOCK_DETECT_CONFIG2, 0x89), + QMP_PHY_INIT_CFG(QPHY_V8_PCS_LOCK_DETECT_CONFIG3, 0x20), + QMP_PHY_INIT_CFG(QPHY_V8_PCS_LOCK_DETECT_CONFIG6, 0x13), + QMP_PHY_INIT_CFG(QPHY_V8_PCS_REFGEN_REQ_CONFIG1, 0x21), + QMP_PHY_INIT_CFG(QPHY_V8_PCS_RX_SIGDET_LVL, 0x55), + QMP_PHY_INIT_CFG(QPHY_V8_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7), + QMP_PHY_INIT_CFG(QPHY_V8_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03), + QMP_PHY_INIT_CFG(QPHY_V8_PCS_CDR_RESET_TIME, 0x0a), + QMP_PHY_INIT_CFG(QPHY_V8_PCS_ALIGN_DETECT_CONFIG1, 0x88), + QMP_PHY_INIT_CFG(QPHY_V8_PCS_ALIGN_DETECT_CONFIG2, 0x13), + QMP_PHY_INIT_CFG(QPHY_V8_PCS_PCS_TX_RX_CONFIG, 0x0c), + QMP_PHY_INIT_CFG(QPHY_V8_PCS_EQ_CONFIG1, 0x4b), + QMP_PHY_INIT_CFG(QPHY_V8_PCS_EQ_CONFIG5, 0x10), +}; + +static const struct qmp_phy_init_tbl sm8750_usb3_pcs_usb_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V8_PCS_USB_LFPS_DET_HIGH_COUNT_VAL, 0xf8), + QMP_PHY_INIT_CFG(QPHY_V8_PCS_USB_RXEQTRAINING_DFE_TIME_S2, 0x07), + QMP_PHY_INIT_CFG(QPHY_V8_PCS_USB_RCVR_DTCT_DLY_U3_L, 0x40), + QMP_PHY_INIT_CFG(QPHY_V8_PCS_USB_RCVR_DTCT_DLY_U3_H, 0x00), +}; + static const struct qmp_phy_init_tbl x1e80100_usb43dp_pcs_usb_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8), QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07), @@ -1781,6 +1940,22 @@ static const struct qmp_combo_offsets qmp_combo_offsets_v5 = { .dp_dp_phy = 0x2200, }; +static const struct qmp_combo_offsets qmp_combo_offsets_v8 = { + .com = 0x0000, + .txa = 0x1400, + .rxa = 0x1600, + .txb = 0x1800, + .rxb = 0x1a00, + .usb3_serdes = 0x1000, + .usb3_pcs_misc = 0x1c00, + .usb3_pcs = 0x1e00, + .usb3_pcs_usb = 0x2100, + .dp_serdes = 0x3000, + .dp_txa = 0x3400, + .dp_txb = 0x3800, + .dp_dp_phy = 0x3c00, +}; + static const struct qmp_phy_cfg sar2130p_usb3dpphy_cfg = { .offsets = &qmp_combo_offsets_v3, @@ -2280,6 +2455,51 @@ static const struct qmp_phy_cfg sm8650_usb3dpphy_cfg = { .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), }; +static const struct qmp_phy_cfg sm8750_usb3dpphy_cfg = { + .offsets = &qmp_combo_offsets_v8, + + .serdes_tbl = sm8750_usb3_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(sm8750_usb3_serdes_tbl), + .tx_tbl = sm8750_usb3_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(sm8750_usb3_tx_tbl), + .rx_tbl = sm8750_usb3_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(sm8750_usb3_rx_tbl), + .pcs_tbl = sm8750_usb3_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(sm8750_usb3_pcs_tbl), + .pcs_usb_tbl = sm8750_usb3_pcs_usb_tbl, + .pcs_usb_tbl_num = ARRAY_SIZE(sm8750_usb3_pcs_usb_tbl), + + .dp_serdes_tbl = qmp_v6_dp_serdes_tbl, + .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl), + .dp_tx_tbl = qmp_v6_dp_tx_tbl, + .dp_tx_tbl_num = ARRAY_SIZE(qmp_v6_dp_tx_tbl), + + .serdes_tbl_rbr = qmp_v6_dp_serdes_tbl_rbr, + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl_rbr), + .serdes_tbl_hbr = qmp_v6_dp_serdes_tbl_hbr, + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr), + .serdes_tbl_hbr2 = qmp_v6_dp_serdes_tbl_hbr2, + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr2), + .serdes_tbl_hbr3 = qmp_v6_dp_serdes_tbl_hbr3, + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr3), + + .swing_hbr_rbr = &qmp_dp_v6_voltage_swing_hbr_rbr, + .pre_emphasis_hbr_rbr = &qmp_dp_v6_pre_emphasis_hbr_rbr, + .swing_hbr3_hbr2 = &qmp_dp_v5_voltage_swing_hbr3_hbr2, + .pre_emphasis_hbr3_hbr2 = &qmp_dp_v5_pre_emphasis_hbr3_hbr2, + + .dp_aux_init = qmp_v4_dp_aux_init, + .configure_dp_tx = qmp_v4_configure_dp_tx, + .configure_dp_phy = qmp_v4_configure_dp_phy, + .calibrate_dp_phy = qmp_v4_calibrate_dp_phy, + + .regs = qmp_v8_usb3phy_regs_layout, + .reset_list = msm8996_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), +}; + static int qmp_combo_dp_serdes_init(struct qmp_combo *qmp) { const struct qmp_phy_cfg *cfg = qmp->cfg; @@ -3916,6 +4136,10 @@ static const struct of_device_id qmp_combo_of_match_table[] = { .data = &sm8650_usb3dpphy_cfg, }, { + .compatible = "qcom,sm8750-qmp-usb3-dp-phy", + .data = &sm8750_usb3dpphy_cfg, + }, + { .compatible = "qcom,x1e80100-qmp-usb3-dp-phy", .data = &x1e80100_usb3dpphy_cfg, }, diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c index 461b9e0af610..95830dcfdec9 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c @@ -2639,29 +2639,29 @@ static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x2_pcie_rc_serdes_alt_tbl[] }; static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x2_pcie_rx_alt_tbl[] = { - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_PI_CONTROLS, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_PI_CONTROLS, 0x07), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B0, 0x9a), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B0, 0x9b), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1, 0xb0), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2, 0x92), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2, 0xe4), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3, 0xf0), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B4, 0x42), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5, 0x99), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6, 0x29), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B0, 0x9a), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B0, 0x9b), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B1, 0xfb), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B2, 0x92), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B2, 0xe4), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B3, 0xec), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B4, 0x43), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B5, 0xdd), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B6, 0x0d), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B0, 0xf3), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B0, 0xb3), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B1, 0xf8), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B2, 0xec), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B3, 0xd6), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B4, 0x83), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B5, 0xf5), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B6, 0x5e), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B2, 0xed), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B3, 0xe5), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B4, 0x8d), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B5, 0xd6), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B6, 0x7e), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_PHPRE_CTRL, 0x20), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_0_1, 0x3f), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_2_3, 0x37), @@ -2680,12 +2680,12 @@ static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x2_pcie_rx_alt_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE3, 0x08), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_SO_GAIN_RATE3, 0x04), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_CNTRL1, 0x04), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_MAN_VAL, 0x08), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_MAN_VAL, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4, 0x08), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x7c), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_IDAC_SAOFFSET, 0x10), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_DFE_DAC_ENABLE1, 0x00), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_GM_CAL, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_GM_CAL, 0x01), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1, 0x00), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2, 0x1f), }; @@ -2699,6 +2699,8 @@ static const struct qmp_phy_init_tbl sa8775p_qmp_gen4_pcie_tx_tbl[] = { }; static const struct qmp_phy_init_tbl sa8775p_qmp_gen4_pcie_pcs_misc_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_PCIE_V5_20_PCS_G3_RXEQEVAL_TIME, 0x27), + QMP_PHY_INIT_CFG(QPHY_PCIE_V5_20_PCS_G4_RXEQEVAL_TIME, 0x27), QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_EQ_CONFIG1, 0x16), QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02), QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN, 0x2e), @@ -2711,11 +2713,19 @@ static const struct qmp_phy_init_tbl sa8775p_qmp_gen4_pcie_rc_pcs_misc_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00), }; -static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x2_pcie_pcs_alt_tbl[] = { +static const struct qmp_phy_init_tbl sa8775p_qmp_gen4_pcie_pcs_alt_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_EQ_CONFIG4, 0x16), QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_EQ_CONFIG5, 0x22), QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_G3S2_PRE_GAIN, 0x2e), QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_RX_SIGDET_LVL, 0x66), + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_LOCK_DETECT_CONFIG1, 0xff), + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_LOCK_DETECT_CONFIG2, 0x89), + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_ALIGN_DETECT_CONFIG1, 0x00), + QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_ALIGN_DETECT_CONFIG2, 0x50), +}; + +static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x2_pcie_ln_shrd_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_v5_LN_SHRD_UCDR_PI_CTRL2, 0x00), }; static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_rx_alt_tbl[] = { @@ -2739,27 +2749,27 @@ static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_rx_alt_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3, 0x1f), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3, 0x1f), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_Q_PI_INTRINSIC_BIAS_RATE32, 0x09), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B0, 0x99), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B0, 0x9b), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1, 0xb0), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2, 0x92), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2, 0xd2), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3, 0xf0), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B4, 0x42), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5, 0x00), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6, 0x20), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B0, 0x9a), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B0, 0x9b), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B1, 0xb6), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B2, 0x92), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B2, 0xd2), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B3, 0xf0), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B4, 0x43), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B5, 0xdd), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE2_B6, 0x0d), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B0, 0xf3), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B0, 0xb3), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B1, 0xf6), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B2, 0xee), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B3, 0xd2), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B2, 0xe4), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B3, 0xe6), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B4, 0x83), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B5, 0xf9), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B6, 0x3d), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B5, 0xd6), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_RX_MODE_RATE3_B6, 0x7e), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1, 0x00), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2, 0x1f), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE2, 0x0c), @@ -2767,14 +2777,7 @@ static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_rx_alt_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_SO_GAIN_RATE3, 0x04), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_UCDR_PI_CONTROLS, 0x16), QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_CNTRL1, 0x04), - QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_MAN_VAL, 0x08), -}; - -static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_pcs_alt_tbl[] = { - QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_EQ_CONFIG4, 0x16), - QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_EQ_CONFIG5, 0x22), - QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_G3S2_PRE_GAIN, 0x2e), - QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_RX_SIGDET_LVL, 0x66), + QMP_PHY_INIT_CFG(QSERDES_V5_20_RX_VGA_CAL_MAN_VAL, 0x06), }; static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_serdes_alt_tbl[] = { @@ -3191,6 +3194,7 @@ static const struct qmp_pcie_offsets qmp_pcie_offsets_v5_20 = { .rx = 0x0200, .tx2 = 0x0800, .rx2 = 0x0a00, + .ln_shrd = 0x0e00, }; static const struct qmp_pcie_offsets qmp_pcie_offsets_v5_30 = { @@ -3398,8 +3402,8 @@ static const struct qmp_phy_cfg qcs8300_qmp_gen4x2_pciephy_cfg = { .tx_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_tx_tbl), .rx = qcs8300_qmp_gen4x2_pcie_rx_alt_tbl, .rx_num = ARRAY_SIZE(qcs8300_qmp_gen4x2_pcie_rx_alt_tbl), - .pcs = sa8775p_qmp_gen4x2_pcie_pcs_alt_tbl, - .pcs_num = ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_pcs_alt_tbl), + .pcs = sa8775p_qmp_gen4_pcie_pcs_alt_tbl, + .pcs_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_pcs_alt_tbl), .pcs_misc = sa8775p_qmp_gen4_pcie_pcs_misc_tbl, .pcs_misc_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_pcs_misc_tbl), }, @@ -4067,12 +4071,15 @@ static const struct qmp_phy_cfg sa8775p_qmp_gen4x2_pciephy_cfg = { .tx_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_tx_tbl), .rx = sa8775p_qmp_gen4x2_pcie_rx_alt_tbl, .rx_num = ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_rx_alt_tbl), - .pcs = sa8775p_qmp_gen4x2_pcie_pcs_alt_tbl, - .pcs_num = ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_pcs_alt_tbl), - .pcs_misc = sa8775p_qmp_gen4_pcie_pcs_misc_tbl, + .pcs = sa8775p_qmp_gen4_pcie_pcs_alt_tbl, + .pcs_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_pcs_alt_tbl), + .pcs_misc = sa8775p_qmp_gen4_pcie_pcs_misc_tbl, .pcs_misc_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_pcs_misc_tbl), .pcs_lane1 = sdx65_qmp_pcie_pcs_lane1_tbl, .pcs_lane1_num = ARRAY_SIZE(sdx65_qmp_pcie_pcs_lane1_tbl), + .ln_shrd = sa8775p_qmp_gen4x2_pcie_ln_shrd_tbl, + .ln_shrd_num = ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_ln_shrd_tbl), + }, .tbls_rc = &(const struct qmp_phy_cfg_tbls) { @@ -4112,8 +4119,8 @@ static const struct qmp_phy_cfg sa8775p_qmp_gen4x4_pciephy_cfg = { .tx_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_tx_tbl), .rx = sa8775p_qmp_gen4x4_pcie_rx_alt_tbl, .rx_num = ARRAY_SIZE(sa8775p_qmp_gen4x4_pcie_rx_alt_tbl), - .pcs = sa8775p_qmp_gen4x4_pcie_pcs_alt_tbl, - .pcs_num = ARRAY_SIZE(sa8775p_qmp_gen4x4_pcie_pcs_alt_tbl), + .pcs = sa8775p_qmp_gen4_pcie_pcs_alt_tbl, + .pcs_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_pcs_alt_tbl), .pcs_misc = sa8775p_qmp_gen4_pcie_pcs_misc_tbl, .pcs_misc_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_pcs_misc_tbl), }, diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5_20.h index 283d63c81593..951de964dc12 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5_20.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5_20.h @@ -13,6 +13,8 @@ #define QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS 0x090 #define QPHY_V5_20_PCS_PCIE_EQ_CONFIG1 0x0a0 #define QPHY_V5_20_PCS_PCIE_PRESET_P10_POST 0x0e0 +#define QPHY_PCIE_V5_20_PCS_G3_RXEQEVAL_TIME 0x0f0 +#define QPHY_PCIE_V5_20_PCS_G4_RXEQEVAL_TIME 0x0f4 #define QPHY_V5_20_PCS_PCIE_G4_EQ_CONFIG2 0x0fc #define QPHY_V5_20_PCS_PCIE_G4_EQ_CONFIG5 0x108 #define QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN 0x15c diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v8.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v8.h new file mode 100644 index 000000000000..89ace8024bc0 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v8.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef QCOM_PHY_QMP_PCS_USB_V8_H_ +#define QCOM_PHY_QMP_PCS_USB_V8_H_ + +#define QPHY_V8_PCS_USB_POWER_STATE_CONFIG1 0x00 +#define QPHY_V8_PCS_USB_AUTONOMOUS_MODE_STATUS 0x04 +#define QPHY_V8_PCS_USB_AUTONOMOUS_MODE_CTRL 0x08 +#define QPHY_V8_PCS_USB_AUTONOMOUS_MODE_CTRL2 0x0c +#define QPHY_V8_PCS_USB_LFPS_RXTERM_IRQ_SOURCE_STATUS 0x10 +#define QPHY_V8_PCS_USB_LFPS_RXTERM_IRQ_CLEAR 0x14 +#define QPHY_V8_PCS_USB_LFPS_DET_HIGH_COUNT_VAL 0x18 +#define QPHY_V8_PCS_USB_LFPS_TX_ECSTART 0x1c +#define QPHY_V8_PCS_USB_LFPS_PER_TIMER_VAL 0x20 +#define QPHY_V8_PCS_USB_LFPS_TX_END_CNT_U3_START 0x24 +#define QPHY_V8_PCS_USB_LFPS_CONFIG1 0x28 +#define QPHY_V8_PCS_USB_RXEQTRAINING_LOCK_TIME 0x2c +#define QPHY_V8_PCS_USB_RXEQTRAINING_WAIT_TIME 0x30 +#define QPHY_V8_PCS_USB_RXEQTRAINING_CTLE_TIME 0x34 +#define QPHY_V8_PCS_USB_RXEQTRAINING_WAIT_TIME_S2 0x38 +#define QPHY_V8_PCS_USB_RXEQTRAINING_DFE_TIME_S2 0x3c +#define QPHY_V8_PCS_USB_RCVR_DTCT_DLY_U3_L 0x40 +#define QPHY_V8_PCS_USB_RCVR_DTCT_DLY_U3_H 0x44 +#define QPHY_V8_PCS_USB_ARCVR_DTCT_EN_PERIOD 0x48 +#define QPHY_V8_PCS_USB_ARCVR_DTCT_CM_DLY 0x4c +#define QPHY_V8_PCS_USB_TXONESZEROS_RUN_LENGTH 0x50 +#define QPHY_V8_PCS_USB_ALFPS_DEGLITCH_VAL 0x54 +#define QPHY_V8_PCS_USB_SIGDET_STARTUP_TIMER_VAL 0x58 +#define QPHY_V8_PCS_USB_TEST_CONTROL 0x5c +#define QPHY_V8_PCS_USB_RXTERMINATION_DLY_SEL 0x60 +#define QPHY_V8_PCS_USB_POWER_STATE_CONFIG2 0x64 +#define QPHY_V8_PCS_USB_POWER_STATE_CONFIG3 0x68 +#define QPHY_V8_PCS_USB_POWER_STATE_CONFIG4 0x6c + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5_20.h index d3ad5b7f5425..bbee68df4e14 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5_20.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5_20.h @@ -8,8 +8,12 @@ #define QPHY_V5_20_PCS_INSIG_SW_CTRL7 0x060 #define QPHY_V5_20_PCS_INSIG_MX_CTRL7 0x07c +#define QPHY_V5_20_PCS_LOCK_DETECT_CONFIG1 0x0c4 +#define QPHY_V5_20_PCS_LOCK_DETECT_CONFIG2 0x0c8 #define QPHY_V5_20_PCS_G3S2_PRE_GAIN 0x170 #define QPHY_V5_20_PCS_RX_SIGDET_LVL 0x188 +#define QPHY_V5_20_PCS_ALIGN_DETECT_CONFIG1 0x1b8 +#define QPHY_V5_20_PCS_ALIGN_DETECT_CONFIG2 0x1bc #define QPHY_V5_20_PCS_EQ_CONFIG2 0x1d8 #define QPHY_V5_20_PCS_EQ_CONFIG4 0x1e0 #define QPHY_V5_20_PCS_EQ_CONFIG5 0x1e4 diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v8.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v8.h new file mode 100644 index 000000000000..169fd5de7474 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v8.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef QCOM_PHY_QMP_PCS_V8_H_ +#define QCOM_PHY_QMP_PCS_V8_H_ + +/* Only for QMP V8 PHY - USB/PCIe PCS registers */ +#define QPHY_V8_PCS_SW_RESET 0x000 +#define QPHY_V8_PCS_PCS_STATUS1 0x014 +#define QPHY_V8_PCS_POWER_DOWN_CONTROL 0x040 +#define QPHY_V8_PCS_START_CONTROL 0x044 +#define QPHY_V8_PCS_POWER_STATE_CONFIG1 0x090 +#define QPHY_V8_PCS_LOCK_DETECT_CONFIG1 0x0c4 +#define QPHY_V8_PCS_LOCK_DETECT_CONFIG2 0x0c8 +#define QPHY_V8_PCS_LOCK_DETECT_CONFIG3 0x0cc +#define QPHY_V8_PCS_LOCK_DETECT_CONFIG6 0x0d8 +#define QPHY_V8_PCS_REFGEN_REQ_CONFIG1 0x0dc +#define QPHY_V8_PCS_RX_SIGDET_LVL 0x188 +#define QPHY_V8_PCS_RCVR_DTCT_DLY_P1U2_L 0x190 +#define QPHY_V8_PCS_RCVR_DTCT_DLY_P1U2_H 0x194 +#define QPHY_V8_PCS_RATE_SLEW_CNTRL1 0x198 +#define QPHY_V8_PCS_CDR_RESET_TIME 0x1b0 +#define QPHY_V8_PCS_ALIGN_DETECT_CONFIG1 0x1c0 +#define QPHY_V8_PCS_ALIGN_DETECT_CONFIG2 0x1c4 +#define QPHY_V8_PCS_PCS_TX_RX_CONFIG 0x1d0 +#define QPHY_V8_PCS_EQ_CONFIG1 0x1dc +#define QPHY_V8_PCS_EQ_CONFIG2 0x1e0 +#define QPHY_V8_PCS_EQ_CONFIG5 0x1ec + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v8.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v8.h new file mode 100644 index 000000000000..d3b2292257bc --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v8.h @@ -0,0 +1,64 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef QCOM_PHY_QMP_QSERDES_COM_V8_H_ +#define QCOM_PHY_QMP_QSERDES_COM_V8_H_ + +/* Only for QMP V8 PHY - QSERDES COM registers */ +#define QSERDES_V8_COM_SSC_STEP_SIZE1_MODE1 0x000 +#define QSERDES_V8_COM_SSC_STEP_SIZE2_MODE1 0x004 +#define QSERDES_V8_COM_SSC_STEP_SIZE3_MODE1 0x008 +#define QSERDES_V8_COM_CP_CTRL_MODE1 0x010 +#define QSERDES_V8_COM_PLL_RCTRL_MODE1 0x014 +#define QSERDES_V8_COM_PLL_CCTRL_MODE1 0x018 +#define QSERDES_V8_COM_CORECLK_DIV_MODE1 0x01c +#define QSERDES_V8_COM_LOCK_CMP1_MODE1 0x020 +#define QSERDES_V8_COM_LOCK_CMP2_MODE1 0x024 +#define QSERDES_V8_COM_DEC_START_MODE1 0x028 +#define QSERDES_V8_COM_DEC_START_MSB_MODE1 0x02c +#define QSERDES_V8_COM_DIV_FRAC_START1_MODE1 0x030 +#define QSERDES_V8_COM_DIV_FRAC_START2_MODE1 0x034 +#define QSERDES_V8_COM_DIV_FRAC_START3_MODE1 0x038 +#define QSERDES_V8_COM_HSCLK_SEL_1 0x03c +#define QSERDES_V8_COM_VCO_TUNE1_MODE1 0x048 +#define QSERDES_V8_COM_VCO_TUNE2_MODE1 0x04c +#define QSERDES_V8_COM_BIN_VCOCAL_CMP_CODE1_MODE1 0x050 +#define QSERDES_V8_COM_BIN_VCOCAL_CMP_CODE2_MODE1 0x054 +#define QSERDES_V8_COM_BIN_VCOCAL_CMP_CODE1_MODE0 0x058 +#define QSERDES_V8_COM_BIN_VCOCAL_CMP_CODE2_MODE0 0x05c +#define QSERDES_V8_COM_SSC_STEP_SIZE1_MODE0 0x060 +#define QSERDES_V8_COM_SSC_STEP_SIZE2_MODE0 0x064 +#define QSERDES_V8_COM_CP_CTRL_MODE0 0x070 +#define QSERDES_V8_COM_PLL_RCTRL_MODE0 0x074 +#define QSERDES_V8_COM_PLL_CCTRL_MODE0 0x078 +#define QSERDES_V8_COM_LOCK_CMP1_MODE0 0x080 +#define QSERDES_V8_COM_LOCK_CMP2_MODE0 0x084 +#define QSERDES_V8_COM_DEC_START_MODE0 0x088 +#define QSERDES_V8_COM_DEC_START_MSB_MODE0 0x08c +#define QSERDES_V8_COM_DIV_FRAC_START1_MODE0 0x090 +#define QSERDES_V8_COM_DIV_FRAC_START2_MODE0 0x094 +#define QSERDES_V8_COM_DIV_FRAC_START3_MODE0 0x098 +#define QSERDES_V8_COM_VCO_TUNE1_MODE0 0x0a8 +#define QSERDES_V8_COM_VCO_TUNE2_MODE0 0x0ac +#define QSERDES_V8_COM_BG_TIMER 0x0bc +#define QSERDES_V8_COM_SSC_EN_CENTER 0x0c0 +#define QSERDES_V8_COM_SSC_PER1 0x0cc +#define QSERDES_V8_COM_SSC_PER2 0x0d0 +#define QSERDES_V8_COM_BIAS_EN_CLKBUFLR_EN 0x0dc +#define QSERDES_V8_COM_SYSCLK_BUF_ENABLE 0x0e8 +#define QSERDES_V8_COM_SYSCLK_EN_SEL 0x110 +#define QSERDES_V8_COM_RESETSM_CNTRL 0x118 +#define QSERDES_V8_COM_LOCK_CMP_CFG 0x124 +#define QSERDES_V8_COM_VCO_TUNE_MAP 0x140 +#define QSERDES_V8_COM_CORE_CLK_EN 0x170 +#define QSERDES_V8_COM_CMN_CONFIG_1 0x174 +#define QSERDES_V8_COM_AUTO_GAIN_ADJ_CTRL_1 0x1a4 +#define QSERDES_V8_COM_AUTO_GAIN_ADJ_CTRL_2 0x1a8 +#define QSERDES_V8_COM_AUTO_GAIN_ADJ_CTRL_3 0x1ac +#define QSERDES_V8_COM_ADDITIONAL_MISC 0x1b4 +#define QSERDES_V8_COM_CMN_STATUS 0x2c8 +#define QSERDES_V8_COM_C_READY_STATUS 0x2f0 + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v5.h new file mode 100644 index 000000000000..68c38fdfc1d8 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v5.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2025, The Linux Foundation. All rights reserved. + */ + +#ifndef QCOM_PHY_QMP_QSERDES_LN_SHRD_V5_H_ +#define QCOM_PHY_QMP_QSERDES_LN_SHRD_V5_H_ + +#define QSERDES_v5_LN_SHRD_UCDR_PI_CTRL2 0x04c + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v8.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v8.h new file mode 100644 index 000000000000..4cb8b1708607 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v8.h @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef QCOM_PHY_QMP_QSERDES_TXRX_V8_H_ +#define QCOM_PHY_QMP_QSERDES_TXRX_V8_H_ + +#define QSERDES_V8_TX_TX_EMP_POST1_LVL 0x00c +#define QSERDES_V8_TX_TX_DRV_LVL 0x014 +#define QSERDES_V8_TX_RES_CODE_LANE_TX 0x034 +#define QSERDES_V8_TX_RES_CODE_LANE_RX 0x038 +#define QSERDES_V8_TX_RES_CODE_LANE_OFFSET_TX 0x03c +#define QSERDES_V8_TX_RES_CODE_LANE_OFFSET_RX 0x040 +#define QSERDES_V8_TX_TRANSCEIVER_BIAS_EN 0x054 +#define QSERDES_V8_TX_HIGHZ_DRVR_EN 0x058 +#define QSERDES_V8_TX_TX_POL_INV 0x05c +#define QSERDES_V8_TX_LANE_MODE_1 0x084 +#define QSERDES_V8_TX_LANE_MODE_2 0x088 +#define QSERDES_V8_TX_LANE_MODE_3 0x08c +#define QSERDES_V8_TX_LANE_MODE_4 0x090 +#define QSERDES_V8_TX_LANE_MODE_5 0x094 +#define QSERDES_V8_TX_RCV_DETECT_LVL_2 0x0a4 +#define QSERDES_V8_TX_PI_QEC_CTRL 0x0e4 + +#define QSERDES_V8_RX_UCDR_FO_GAIN 0x008 +#define QSERDES_V8_RX_UCDR_SO_GAIN 0x014 +#define QSERDES_V8_RX_UCDR_SVS_FO_GAIN 0x020 +#define QSERDES_V8_RX_UCDR_FASTLOCK_FO_GAIN 0x030 +#define QSERDES_V8_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034 +#define QSERDES_V8_RX_UCDR_FASTLOCK_COUNT_LOW 0x03c +#define QSERDES_V8_RX_UCDR_FASTLOCK_COUNT_HIGH 0x040 +#define QSERDES_V8_RX_UCDR_PI_CONTROLS 0x044 +#define QSERDES_V8_RX_UCDR_SB2_THRESH1 0x04c +#define QSERDES_V8_RX_UCDR_SB2_THRESH2 0x050 +#define QSERDES_V8_RX_UCDR_SB2_GAIN1 0x054 +#define QSERDES_V8_RX_UCDR_SB2_GAIN2 0x058 +#define QSERDES_V8_RX_AUX_DATA_TCOARSE_TFINE 0x060 +#define QSERDES_V8_RX_VGA_CAL_CNTRL1 0x0d4 +#define QSERDES_V8_RX_VGA_CAL_CNTRL2 0x0d8 +#define QSERDES_V8_RX_GM_CAL 0x0dc +#define QSERDES_V8_RX_RX_EQU_ADAPTOR_CNTRL2 0x0ec +#define QSERDES_V8_RX_RX_EQU_ADAPTOR_CNTRL3 0x0f0 +#define QSERDES_V8_RX_RX_EQU_ADAPTOR_CNTRL4 0x0f4 +#define QSERDES_V8_RX_RX_IDAC_TSETTLE_LOW 0x0f8 +#define QSERDES_V8_RX_RX_IDAC_TSETTLE_HIGH 0x0fc +#define QSERDES_V8_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x110 +#define QSERDES_V8_RX_SIGDET_ENABLES 0x118 +#define QSERDES_V8_RX_SIGDET_CNTRL 0x11c +#define QSERDES_V8_RX_SIGDET_DEGLITCH_CNTRL 0x124 +#define QSERDES_V8_RX_RX_MODE_00_LOW 0x15c +#define QSERDES_V8_RX_RX_MODE_00_HIGH 0x160 +#define QSERDES_V8_RX_RX_MODE_00_HIGH2 0x164 +#define QSERDES_V8_RX_RX_MODE_00_HIGH3 0x168 +#define QSERDES_V8_RX_RX_MODE_00_HIGH4 0x16c +#define QSERDES_V8_RX_RX_MODE_01_LOW 0x170 +#define QSERDES_V8_RX_RX_MODE_01_HIGH 0x174 +#define QSERDES_V8_RX_RX_MODE_01_HIGH2 0x178 +#define QSERDES_V8_RX_RX_MODE_01_HIGH3 0x17c +#define QSERDES_V8_RX_RX_MODE_01_HIGH4 0x180 +#define QSERDES_V8_RX_DFE_EN_TIMER 0x1a0 +#define QSERDES_V8_RX_DFE_CTLE_POST_CAL_OFFSET 0x1a4 +#define QSERDES_V8_RX_DCC_CTRL1 0x1a8 +#define QSERDES_V8_RX_VTH_CODE 0x1b0 +#define QSERDES_V8_RX_SIGDET_CAL_CTRL1 0x1e4 +#define QSERDES_V8_RX_SIGDET_CAL_TRIM 0x1f8 + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index b33e2e2b5014..9c69c77d10c8 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -1758,8 +1758,9 @@ static void qmp_ufs_init_registers(struct qmp_ufs *qmp, const struct qmp_phy_cfg qmp_ufs_init_all(qmp, &cfg->tbls_hs_b); } -static int qmp_ufs_com_init(struct qmp_ufs *qmp) +static int qmp_ufs_power_on(struct phy *phy) { + struct qmp_ufs *qmp = phy_get_drvdata(phy); const struct qmp_phy_cfg *cfg = qmp->cfg; void __iomem *pcs = qmp->pcs; int ret; @@ -1775,70 +1776,14 @@ static int qmp_ufs_com_init(struct qmp_ufs *qmp) goto err_disable_regulators; qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], SW_PWRDN); - return 0; err_disable_regulators: regulator_bulk_disable(cfg->num_vregs, qmp->vregs); - return ret; } -static int qmp_ufs_com_exit(struct qmp_ufs *qmp) -{ - const struct qmp_phy_cfg *cfg = qmp->cfg; - - reset_control_assert(qmp->ufs_reset); - - clk_bulk_disable_unprepare(qmp->num_clks, qmp->clks); - - regulator_bulk_disable(cfg->num_vregs, qmp->vregs); - - return 0; -} - -static int qmp_ufs_init(struct phy *phy) -{ - struct qmp_ufs *qmp = phy_get_drvdata(phy); - const struct qmp_phy_cfg *cfg = qmp->cfg; - int ret; - dev_vdbg(qmp->dev, "Initializing QMP phy\n"); - - if (cfg->no_pcs_sw_reset) { - /* - * Get UFS reset, which is delayed until now to avoid a - * circular dependency where UFS needs its PHY, but the PHY - * needs this UFS reset. - */ - if (!qmp->ufs_reset) { - qmp->ufs_reset = - devm_reset_control_get_exclusive(qmp->dev, - "ufsphy"); - - if (IS_ERR(qmp->ufs_reset)) { - ret = PTR_ERR(qmp->ufs_reset); - dev_err(qmp->dev, - "failed to get UFS reset: %d\n", - ret); - - qmp->ufs_reset = NULL; - return ret; - } - } - - ret = reset_control_assert(qmp->ufs_reset); - if (ret) - return ret; - } - - ret = qmp_ufs_com_init(qmp); - if (ret) - return ret; - - return 0; -} - -static int qmp_ufs_power_on(struct phy *phy) +static int qmp_ufs_phy_calibrate(struct phy *phy) { struct qmp_ufs *qmp = phy_get_drvdata(phy); const struct qmp_phy_cfg *cfg = qmp->cfg; @@ -1847,6 +1792,10 @@ static int qmp_ufs_power_on(struct phy *phy) unsigned int val; int ret; + ret = reset_control_assert(qmp->ufs_reset); + if (ret) + return ret; + qmp_ufs_init_registers(qmp, cfg); ret = reset_control_deassert(qmp->ufs_reset); @@ -1876,54 +1825,17 @@ static int qmp_ufs_power_off(struct phy *phy) struct qmp_ufs *qmp = phy_get_drvdata(phy); const struct qmp_phy_cfg *cfg = qmp->cfg; - /* PHY reset */ - if (!cfg->no_pcs_sw_reset) - qphy_setbits(qmp->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); - - /* stop SerDes */ - qphy_clrbits(qmp->pcs, cfg->regs[QPHY_START_CTRL], SERDES_START); - /* Put PHY into POWER DOWN state: active low */ qphy_clrbits(qmp->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], SW_PWRDN); - return 0; -} - -static int qmp_ufs_exit(struct phy *phy) -{ - struct qmp_ufs *qmp = phy_get_drvdata(phy); + clk_bulk_disable_unprepare(qmp->num_clks, qmp->clks); - qmp_ufs_com_exit(qmp); + regulator_bulk_disable(cfg->num_vregs, qmp->vregs); return 0; } -static int qmp_ufs_enable(struct phy *phy) -{ - int ret; - - ret = qmp_ufs_init(phy); - if (ret) - return ret; - - ret = qmp_ufs_power_on(phy); - if (ret) - qmp_ufs_exit(phy); - - return ret; -} - -static int qmp_ufs_disable(struct phy *phy) -{ - int ret; - - ret = qmp_ufs_power_off(phy); - if (ret) - return ret; - return qmp_ufs_exit(phy); -} - static int qmp_ufs_set_mode(struct phy *phy, enum phy_mode mode, int submode) { struct qmp_ufs *qmp = phy_get_drvdata(phy); @@ -1940,9 +1852,40 @@ static int qmp_ufs_set_mode(struct phy *phy, enum phy_mode mode, int submode) return 0; } +static int qmp_ufs_phy_init(struct phy *phy) +{ + struct qmp_ufs *qmp = phy_get_drvdata(phy); + const struct qmp_phy_cfg *cfg = qmp->cfg; + int ret; + + if (!cfg->no_pcs_sw_reset) + return 0; + + /* + * Get UFS reset, which is delayed until now to avoid a + * circular dependency where UFS needs its PHY, but the PHY + * needs this UFS reset. + */ + if (!qmp->ufs_reset) { + qmp->ufs_reset = + devm_reset_control_get_exclusive(qmp->dev, "ufsphy"); + + if (IS_ERR(qmp->ufs_reset)) { + ret = PTR_ERR(qmp->ufs_reset); + dev_err(qmp->dev, "failed to get PHY reset: %d\n", ret); + qmp->ufs_reset = NULL; + return ret; + } + } + + return 0; +} + static const struct phy_ops qcom_qmp_ufs_phy_ops = { - .power_on = qmp_ufs_enable, - .power_off = qmp_ufs_disable, + .init = qmp_ufs_phy_init, + .power_on = qmp_ufs_power_on, + .power_off = qmp_ufs_power_off, + .calibrate = qmp_ufs_phy_calibrate, .set_mode = qmp_ufs_set_mode, .owner = THIS_MODULE, }; diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index d0f41e4aaa85..f58c82b2dd23 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -25,11 +25,15 @@ #include "phy-qcom-qmp-qserdes-txrx-v6.h" #include "phy-qcom-qmp-qserdes-txrx-v6_20.h" #include "phy-qcom-qmp-qserdes-txrx-v6_n4.h" +#include "phy-qcom-qmp-qserdes-ln-shrd-v5.h" #include "phy-qcom-qmp-qserdes-ln-shrd-v6.h" #include "phy-qcom-qmp-qserdes-com-v7.h" #include "phy-qcom-qmp-qserdes-txrx-v7.h" +#include "phy-qcom-qmp-qserdes-com-v8.h" +#include "phy-qcom-qmp-qserdes-txrx-v8.h" + #include "phy-qcom-qmp-qserdes-pll.h" #include "phy-qcom-qmp-pcs-v2.h" @@ -52,6 +56,8 @@ #include "phy-qcom-qmp-pcs-v7.h" +#include "phy-qcom-qmp-pcs-v8.h" + /* QPHY_SW_RESET bit */ #define SW_RESET BIT(0) /* QPHY_POWER_DOWN_CONTROL */ diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c index 49c37c53b38e..b5514a32ff8f 100644 --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c @@ -1114,9 +1114,7 @@ static int qusb2_phy_probe(struct platform_device *pdev) phy_set_drvdata(generic_phy, qphy); phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); - if (!IS_ERR(phy_provider)) - dev_info(dev, "Registered Qcom-QUSB2 phy\n"); - else + if (IS_ERR(phy_provider)) pm_runtime_disable(dev); return PTR_ERR_OR_ZERO(phy_provider); diff --git a/drivers/phy/rockchip/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c index bd44af36c67a..4e2dfd01adf2 100644 --- a/drivers/phy/rockchip/phy-rockchip-pcie.c +++ b/drivers/phy/rockchip/phy-rockchip-pcie.c @@ -30,9 +30,8 @@ #define PHY_CFG_ADDR_SHIFT 1 #define PHY_CFG_DATA_MASK 0xf #define PHY_CFG_ADDR_MASK 0x3f -#define PHY_CFG_RD_MASK 0x3ff #define PHY_CFG_WR_ENABLE 1 -#define PHY_CFG_WR_DISABLE 1 +#define PHY_CFG_WR_DISABLE 0 #define PHY_CFG_WR_SHIFT 0 #define PHY_CFG_WR_MASK 1 #define PHY_CFG_PLL_LOCK 0x10 @@ -160,6 +159,12 @@ static int rockchip_pcie_phy_power_on(struct phy *phy) guard(mutex)(&rk_phy->pcie_mutex); + regmap_write(rk_phy->reg_base, + rk_phy->phy_data->pcie_laneoff, + HIWORD_UPDATE(!PHY_LANE_IDLE_OFF, + PHY_LANE_IDLE_MASK, + PHY_LANE_IDLE_A_SHIFT + inst->index)); + if (rk_phy->pwr_cnt++) { return 0; } @@ -176,12 +181,6 @@ static int rockchip_pcie_phy_power_on(struct phy *phy) PHY_CFG_ADDR_MASK, PHY_CFG_ADDR_SHIFT)); - regmap_write(rk_phy->reg_base, - rk_phy->phy_data->pcie_laneoff, - HIWORD_UPDATE(!PHY_LANE_IDLE_OFF, - PHY_LANE_IDLE_MASK, - PHY_LANE_IDLE_A_SHIFT + inst->index)); - /* * No documented timeout value for phy operation below, * so we make it large enough here. And we use loop-break diff --git a/drivers/phy/samsung/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c index f6756a609a9a..be925508ed97 100644 --- a/drivers/phy/samsung/phy-exynos-mipi-video.c +++ b/drivers/phy/samsung/phy-exynos-mipi-video.c @@ -213,6 +213,55 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = { }, }; +static const struct mipi_phy_device_desc exynos7870_mipi_phy = { + .num_regmaps = 3, + .regmap_names = { + "samsung,pmu-syscon", + "samsung,disp-sysreg", + "samsung,cam0-sysreg" + }, + .num_phys = 4, + .phys = { + { + /* EXYNOS_MIPI_PHY_ID_CSIS0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS7870_MIPI_PHY_CONTROL0, + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(0), + .resetn_reg = 0, + .resetn_map = EXYNOS_MIPI_REGMAP_CAM0, + }, { + /* EXYNOS_MIPI_PHY_ID_DSIM0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS7870_MIPI_PHY_CONTROL0, + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(0), + .resetn_reg = 0, + .resetn_map = EXYNOS_MIPI_REGMAP_DISP, + }, { + /* EXYNOS_MIPI_PHY_ID_CSIS1 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS7870_MIPI_PHY_CONTROL1, + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(1), + .resetn_reg = 0, + .resetn_map = EXYNOS_MIPI_REGMAP_CAM0, + }, { + /* EXYNOS_MIPI_PHY_ID_CSIS2 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE, + .enable_val = EXYNOS4_PHY_ENABLE, + .enable_reg = EXYNOS7870_MIPI_PHY_CONTROL2, + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = BIT(2), + .resetn_reg = 0, + .resetn_map = EXYNOS_MIPI_REGMAP_CAM0, + }, + }, +}; + struct exynos_mipi_video_phy { struct regmap *regmaps[EXYNOS_MIPI_REGMAPS_NUM]; int num_phys; @@ -351,6 +400,9 @@ static const struct of_device_id exynos_mipi_video_phy_of_match[] = { }, { .compatible = "samsung,exynos5433-mipi-video-phy", .data = &exynos5433_mipi_phy, + }, { + .compatible = "samsung,exynos7870-mipi-video-phy", + .data = &exynos7870_mipi_phy, }, { /* sentinel */ }, }; diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c index 917a76d584f0..dd660ebe8045 100644 --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c @@ -2025,6 +2025,35 @@ static const struct exynos5_usbdrd_phy_drvdata exynos850_usbdrd_phy = { .n_regulators = ARRAY_SIZE(exynos5_regulator_names), }; +static const struct exynos5_usbdrd_phy_tuning exynos990_tunes_utmi_postinit[] = { + PHY_TUNING_ENTRY_PHY(EXYNOS850_DRD_HSPPARACON, + (HSPPARACON_TXVREF | + HSPPARACON_TXPREEMPAMP | HSPPARACON_SQRX | + HSPPARACON_COMPDIS), + (FIELD_PREP_CONST(HSPPARACON_TXVREF, 7) | + FIELD_PREP_CONST(HSPPARACON_TXPREEMPAMP, 3) | + FIELD_PREP_CONST(HSPPARACON_SQRX, 5) | + FIELD_PREP_CONST(HSPPARACON_COMPDIS, 7))), + PHY_TUNING_ENTRY_LAST +}; + +static const struct exynos5_usbdrd_phy_tuning *exynos990_tunes[PTS_MAX] = { + [PTS_UTMI_POSTINIT] = exynos990_tunes_utmi_postinit, +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos990_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos850, + .phy_ops = &exynos850_usbdrd_phy_ops, + .phy_tunes = exynos990_tunes, + .pmu_offset_usbdrd0_phy = EXYNOS990_PHY_CTRL_USB20, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names = exynos5_regulator_names, + .n_regulators = ARRAY_SIZE(exynos5_regulator_names), +}; + static const struct exynos5_usbdrd_phy_config phy_cfg_gs101[] = { { .id = EXYNOS5_DRDPHY_UTMI, @@ -2228,6 +2257,9 @@ static const struct of_device_id exynos5_usbdrd_phy_of_match[] = { }, { .compatible = "samsung,exynos850-usbdrd-phy", .data = &exynos850_usbdrd_phy + }, { + .compatible = "samsung,exynos990-usbdrd-phy", + .data = &exynos990_usbdrd_phy }, { }, }; diff --git a/drivers/phy/st/phy-stih407-usb.c b/drivers/phy/st/phy-stih407-usb.c index ebb1d0858aa3..7a3e4584895c 100644 --- a/drivers/phy/st/phy-stih407-usb.c +++ b/drivers/phy/st/phy-stih407-usb.c @@ -139,8 +139,6 @@ static int stih407_usb2_picophy_probe(struct platform_device *pdev) if (IS_ERR(phy_provider)) return PTR_ERR(phy_provider); - dev_info(dev, "STiH407 USB Generic picoPHY driver probed!"); - return 0; } diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c index b917cd413de7..27fe92f73f33 100644 --- a/drivers/phy/st/phy-stm32-usbphyc.c +++ b/drivers/phy/st/phy-stm32-usbphyc.c @@ -757,8 +757,8 @@ static int stm32_usbphyc_probe(struct platform_device *pdev) } version = readl_relaxed(usbphyc->base + STM32_USBPHYC_VERSION); - dev_info(dev, "registered rev:%lu.%lu\n", - FIELD_GET(MAJREV, version), FIELD_GET(MINREV, version)); + dev_dbg(dev, "registered rev: %lu.%lu\n", + FIELD_GET(MAJREV, version), FIELD_GET(MINREV, version)); return 0; diff --git a/drivers/phy/ti/phy-twl4030-usb.c b/drivers/phy/ti/phy-twl4030-usb.c index 6f12b38cd894..a26aec3ab29e 100644 --- a/drivers/phy/ti/phy-twl4030-usb.c +++ b/drivers/phy/ti/phy-twl4030-usb.c @@ -784,7 +784,6 @@ static int twl4030_usb_probe(struct platform_device *pdev) pm_runtime_mark_last_busy(&pdev->dev); pm_runtime_put_autosuspend(twl->dev); - dev_info(&pdev->dev, "Initialized TWL4030 USB module\n"); return 0; } diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 2a72e7c1d131..4bbe4de1679b 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -532,6 +532,12 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) goto out_disable_phy; } + ret = phy_calibrate(phy); + if (ret) { + dev_err(hba->dev, "Failed to calibrate PHY: %d\n", ret); + goto out_disable_phy; + } + ufs_qcom_select_unipro_mode(host); return 0; @@ -726,26 +732,17 @@ static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op, enum ufs_notify_change_status status) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); - struct phy *phy = host->generic_phy; if (status == PRE_CHANGE) return 0; - if (ufs_qcom_is_link_off(hba)) { - /* - * Disable the tx/rx lane symbol clocks before PHY is - * powered down as the PLL source should be disabled - * after downstream clocks are disabled. - */ + if (!ufs_qcom_is_link_active(hba)) ufs_qcom_disable_lane_clks(host); - phy_power_off(phy); - /* reset the connected UFS device during power down */ - ufs_qcom_device_reset_ctrl(hba, true); - } else if (!ufs_qcom_is_link_active(hba)) { - ufs_qcom_disable_lane_clks(host); - } + /* reset the connected UFS device during power down */ + if (ufs_qcom_is_link_off(hba) && host->device_reset) + ufs_qcom_device_reset_ctrl(hba, true); return ufs_qcom_ice_suspend(host); } @@ -753,26 +750,11 @@ static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op, static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); - struct phy *phy = host->generic_phy; int err; - if (ufs_qcom_is_link_off(hba)) { - err = phy_power_on(phy); - if (err) { - dev_err(hba->dev, "%s: failed PHY power on: %d\n", - __func__, err); - return err; - } - - err = ufs_qcom_enable_lane_clks(host); - if (err) - return err; - - } else if (!ufs_qcom_is_link_active(hba)) { - err = ufs_qcom_enable_lane_clks(host); - if (err) - return err; - } + err = ufs_qcom_enable_lane_clks(host); + if (err) + return err; return ufs_qcom_ice_resume(host); } @@ -1151,12 +1133,20 @@ static void ufs_qcom_set_caps(struct ufs_hba *hba) * @on: If true, enable clocks else disable them. * @status: PRE_CHANGE or POST_CHANGE notify * + * There are certain clocks which comes from the PHY so it needs + * to be managed together along with controller clocks which also + * provides a better power saving. Hence keep phy_power_off/on calls + * in ufs_qcom_setup_clocks, so that PHY's regulators & clks can be + * turned on/off along with UFS's clocks. + * * Return: 0 on success, non-zero on failure. */ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on, enum ufs_notify_change_status status) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); + struct phy *phy; + int err; /* * In case ufs_qcom_init() is not yet done, simply ignore. @@ -1166,6 +1156,8 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on, if (!host) return 0; + phy = host->generic_phy; + switch (status) { case PRE_CHANGE: if (on) { @@ -1175,10 +1167,22 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on, /* disable device ref_clk */ ufs_qcom_dev_ref_clk_ctrl(host, false); } + + err = phy_power_off(phy); + if (err) { + dev_err(hba->dev, "phy power off failed, ret=%d\n", err); + return err; + } } break; case POST_CHANGE: if (on) { + err = phy_power_on(phy); + if (err) { + dev_err(hba->dev, "phy power on failed, ret = %d\n", err); + return err; + } + /* enable the device ref clock for HS mode*/ if (ufshcd_is_hs_mode(&hba->pwr_info)) ufs_qcom_dev_ref_clk_ctrl(host, true); diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h index 1a2c0e0838f9..fa28a8784d65 100644 --- a/include/linux/soc/samsung/exynos-regs-pmu.h +++ b/include/linux/soc/samsung/exynos-regs-pmu.h @@ -662,6 +662,14 @@ #define EXYNOS5433_PAD_RETENTION_UFS_OPTION (0x3268) #define EXYNOS5433_PAD_RETENTION_FSYSGENIO_OPTION (0x32A8) +/* For Exynos990 */ +#define EXYNOS990_PHY_CTRL_USB20 (0x72C) + +/* For Exynos7870 */ +#define EXYNOS7870_MIPI_PHY_CONTROL0 (0x070c) +#define EXYNOS7870_MIPI_PHY_CONTROL1 (0x0714) +#define EXYNOS7870_MIPI_PHY_CONTROL2 (0x0734) + /* For Tensor GS101 */ /* PMU ALIVE */ #define GS101_SYSIP_DAT0 (0x810) |