diff options
| -rw-r--r-- | arch/arm64/boot/dts/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/sophgo/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01-evb.dts | 76 |
3 files changed, 79 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 79b73a21ddc2..3a32b157ac8c 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -28,6 +28,7 @@ subdir-y += realtek subdir-y += renesas subdir-y += rockchip subdir-y += socionext +subdir-y += sophgo subdir-y += sprd subdir-y += st subdir-y += synaptics diff --git a/arch/arm64/boot/dts/sophgo/Makefile b/arch/arm64/boot/dts/sophgo/Makefile new file mode 100644 index 000000000000..94f52cd7d994 --- /dev/null +++ b/arch/arm64/boot/dts/sophgo/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_SOPHGO) += sg2000-milkv-duo-module-01-evb.dtb diff --git a/arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01-evb.dts b/arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01-evb.dts new file mode 100644 index 000000000000..a281fee0d76e --- /dev/null +++ b/arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01-evb.dts @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "sg2000-milkv-duo-module-01.dtsi" + +/ { + model = "Milk-V Duo Module 01 Evaluation Board"; + compatible = "milkv,duo-module-01-evb", "milkv,duo-module-01", "sophgo,sg2000"; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&pinctrl { + sdhci0_cfg: sdhci0-cfg { + sdhci0-cd-pins { + pinmux = <PINMUX(PIN_SD0_CD, 0)>; + bias-pull-up; + drive-strength-microamp = <10800>; + power-source = <3300>; + }; + + sdhci0-clk-pins { + pinmux = <PINMUX(PIN_SD0_CLK, 0)>; + bias-pull-up; + drive-strength-microamp = <16100>; + power-source = <3300>; + }; + + sdhci0-cmd-pins { + pinmux = <PINMUX(PIN_SD0_CMD, 0)>; + bias-pull-up; + drive-strength-microamp = <10800>; + power-source = <3300>; + }; + + sdhci0-data-pins { + pinmux = <PINMUX(PIN_SD0_D0, 0)>, + <PINMUX(PIN_SD0_D1, 0)>, + <PINMUX(PIN_SD0_D2, 0)>, + <PINMUX(PIN_SD0_D3, 0)>; + bias-pull-up; + drive-strength-microamp = <10800>; + power-source = <3300>; + }; + }; + + uart0_cfg: uart0-cfg { + uart0-pins { + pinmux = <PINMUX(PIN_UART0_TX, 0)>, + <PINMUX(PIN_UART0_RX, 0)>; + bias-pull-up; + drive-strength-microamp = <10800>; + power-source = <3300>; + }; + }; +}; + +&uart0 { + pinctrl-0 = <&uart0_cfg>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + no-1-8-v; + no-mmc; + no-sdio; + disable-wp; + pinctrl-0 = <&sdhci0_cfg>; + pinctrl-names = "default"; + status = "okay"; +}; |