diff options
| -rw-r--r-- | Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt b/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt index e80d5891b7ed..8d8e40c56872 100644 --- a/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt +++ b/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt @@ -13,9 +13,6 @@ Mandatory properties - reg: I2C address (0x3e, or an alternative address) - vana-supply: Analogue voltage supply (VANA), 2.8 volts - clocks: External clock to the sensor -- clock-frequency: Frequency of the external clock to the sensor. Camera - driver will set this frequency on the external clock. The clock frequency is - a pre-determined frequency known to be suitable to the board. - reset-gpios: XSHUTDOWN GPIO. The XSHUTDOWN signal is active low. The sensor is in hardware standby mode when the signal is in the low state. @@ -43,8 +40,11 @@ Example compatible = "toshiba,et8ek8"; reg = <0x3e>; vana-supply = <&vaux4>; + clocks = <&isp 0>; - clock-frequency = <9600000>; + assigned-clocks = <&isp 0>; + assigned-clock-rates = <9600000>; + reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ port { csi_cam1: endpoint { |