summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-ixp4xx/fsg-setup.c20
-rw-r--r--arch/arm/mach-ixp4xx/goramo_mlr.c24
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/platform.h22
-rw-r--r--arch/arm/mach-ixp4xx/ixdp425-setup.c20
-rw-r--r--arch/arm/mach-ixp4xx/nas100d-setup.c10
-rw-r--r--arch/arm/mach-ixp4xx/nslu2-setup.c10
-rw-r--r--arch/arm/mach-ixp4xx/omixp-setup.c20
-rw-r--r--arch/arm/mach-ixp4xx/vulcan-setup.c20
-rw-r--r--drivers/net/ethernet/xscale/Kconfig14
-rw-r--r--drivers/net/ethernet/xscale/Makefile3
-rw-r--r--drivers/net/ethernet/xscale/ixp46x_ts.h (renamed from arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h)0
-rw-r--r--drivers/net/ethernet/xscale/ixp4xx_eth.c213
-rw-r--r--drivers/net/ethernet/xscale/ptp_ixp46x.c (renamed from drivers/ptp/ptp_ixp46x.c)3
-rw-r--r--drivers/net/wan/Kconfig3
-rw-r--r--drivers/net/wan/ixp4xx_hss.c39
-rw-r--r--drivers/ptp/Kconfig14
-rw-r--r--drivers/ptp/Makefile3
-rw-r--r--include/linux/platform_data/eth_ixp4xx.h19
-rw-r--r--include/linux/platform_data/wan_ixp4xx_hss.h17
19 files changed, 307 insertions, 167 deletions
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 648932d8d7a8..507ee3878769 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -132,6 +132,22 @@ static struct platform_device fsg_leds = {
};
/* Built-in 10/100 Ethernet MAC interfaces */
+static struct resource fsg_eth_npeb_resources[] = {
+ {
+ .start = IXP4XX_EthB_BASE_PHYS,
+ .end = IXP4XX_EthB_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource fsg_eth_npec_resources[] = {
+ {
+ .start = IXP4XX_EthC_BASE_PHYS,
+ .end = IXP4XX_EthC_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct eth_plat_info fsg_plat_eth[] = {
{
.phy = 5,
@@ -151,12 +167,16 @@ static struct platform_device fsg_eth[] = {
.dev = {
.platform_data = fsg_plat_eth,
},
+ .num_resources = ARRAY_SIZE(fsg_eth_npeb_resources),
+ .resource = fsg_eth_npeb_resources,
}, {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEC,
.dev = {
.platform_data = fsg_plat_eth + 1,
},
+ .num_resources = ARRAY_SIZE(fsg_eth_npec_resources),
+ .resource = fsg_eth_npec_resources,
}
};
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index a0e0b6b7dc5c..07b50dfcc489 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -11,6 +11,7 @@
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/platform_data/wan_ixp4xx_hss.h>
#include <linux/serial_8250.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -272,6 +273,22 @@ static struct platform_device device_uarts = {
/* Built-in 10/100 Ethernet MAC interfaces */
+static struct resource eth_npeb_resources[] = {
+ {
+ .start = IXP4XX_EthB_BASE_PHYS,
+ .end = IXP4XX_EthB_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource eth_npec_resources[] = {
+ {
+ .start = IXP4XX_EthC_BASE_PHYS,
+ .end = IXP4XX_EthC_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct eth_plat_info eth_plat[] = {
{
.phy = 0,
@@ -289,10 +306,14 @@ static struct platform_device device_eth_tab[] = {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEB,
.dev.platform_data = eth_plat,
+ .num_resources = ARRAY_SIZE(eth_npeb_resources),
+ .resource = eth_npeb_resources,
}, {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEC,
.dev.platform_data = eth_plat + 1,
+ .num_resources = ARRAY_SIZE(eth_npec_resources),
+ .resource = eth_npec_resources,
}
};
@@ -405,6 +426,9 @@ static void __init gmlr_init(void)
if (hw_bits & CFG_HW_HAS_HSS1)
device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
+ hss_plat[0].timer_freq = ixp4xx_timer_freq;
+ hss_plat[1].timer_freq = ixp4xx_timer_freq;
+
gpio_request(GPIO_SCL, "SCL/clock");
gpio_request(GPIO_SDA, "SDA/data");
gpio_request(GPIO_STR, "strobe");
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index 342acbe20f7c..6d403fe0bf52 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -15,6 +15,7 @@
#ifndef __ASSEMBLY__
#include <linux/reboot.h>
+#include <linux/platform_data/eth_ixp4xx.h>
#include <asm/types.h>
@@ -92,27 +93,6 @@ struct ixp4xx_pata_data {
void __iomem *cs1;
};
-#define IXP4XX_ETH_NPEA 0x00
-#define IXP4XX_ETH_NPEB 0x10
-#define IXP4XX_ETH_NPEC 0x20
-
-/* Information about built-in Ethernet MAC interfaces */
-struct eth_plat_info {
- u8 phy; /* MII PHY ID, 0 - 31 */
- u8 rxq; /* configurable, currently 0 - 31 only */
- u8 txreadyq;
- u8 hwaddr[6];
-};
-
-/* Information about built-in HSS (synchronous serial) interfaces */
-struct hss_plat_info {
- int (*set_clock)(int port, unsigned int clock_type);
- int (*open)(int port, void *pdev,
- void (*set_carrier_cb)(void *pdev, int carrier));
- void (*close)(int port, void *pdev);
- u8 txreadyq;
-};
-
/*
* Frequency of clock used for primary clocksource
*/
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 6f0f7ed18ea8..45d5b720ded6 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -187,6 +187,22 @@ static struct platform_device ixdp425_uart = {
};
/* Built-in 10/100 Ethernet MAC interfaces */
+static struct resource ixp425_npeb_resources[] = {
+ {
+ .start = IXP4XX_EthB_BASE_PHYS,
+ .end = IXP4XX_EthB_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource ixp425_npec_resources[] = {
+ {
+ .start = IXP4XX_EthC_BASE_PHYS,
+ .end = IXP4XX_EthC_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct eth_plat_info ixdp425_plat_eth[] = {
{
.phy = 0,
@@ -204,10 +220,14 @@ static struct platform_device ixdp425_eth[] = {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEB,
.dev.platform_data = ixdp425_plat_eth,
+ .num_resources = ARRAY_SIZE(ixp425_npeb_resources),
+ .resource = ixp425_npeb_resources,
}, {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEC,
.dev.platform_data = ixdp425_plat_eth + 1,
+ .num_resources = ARRAY_SIZE(ixp425_npec_resources),
+ .resource = ixp425_npec_resources,
}
};
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index c142cfa8c5d6..6959ad2e3aec 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -165,6 +165,14 @@ static struct platform_device nas100d_uart = {
};
/* Built-in 10/100 Ethernet MAC interfaces */
+static struct resource nas100d_eth_resources[] = {
+ {
+ .start = IXP4XX_EthB_BASE_PHYS,
+ .end = IXP4XX_EthB_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct eth_plat_info nas100d_plat_eth[] = {
{
.phy = 0,
@@ -178,6 +186,8 @@ static struct platform_device nas100d_eth[] = {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEB,
.dev.platform_data = nas100d_plat_eth,
+ .num_resources = ARRAY_SIZE(nas100d_eth_resources),
+ .resource = nas100d_eth_resources,
}
};
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index ee1877fcfafe..a428bb918703 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -185,6 +185,14 @@ static struct platform_device nslu2_uart = {
};
/* Built-in 10/100 Ethernet MAC interfaces */
+static struct resource nslu2_eth_resources[] = {
+ {
+ .start = IXP4XX_EthB_BASE_PHYS,
+ .end = IXP4XX_EthB_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct eth_plat_info nslu2_plat_eth[] = {
{
.phy = 1,
@@ -198,6 +206,8 @@ static struct platform_device nslu2_eth[] = {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEB,
.dev.platform_data = nslu2_plat_eth,
+ .num_resources = ARRAY_SIZE(nslu2_eth_resources),
+ .resource = nslu2_eth_resources,
}
};
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
index 6ed5a9aed600..8f2b8c473d7a 100644
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -170,6 +170,22 @@ static struct platform_device mic256_leds = {
};
/* Built-in 10/100 Ethernet MAC interfaces */
+static struct resource ixp425_npeb_resources[] = {
+ {
+ .start = IXP4XX_EthB_BASE_PHYS,
+ .end = IXP4XX_EthB_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource ixp425_npec_resources[] = {
+ {
+ .start = IXP4XX_EthC_BASE_PHYS,
+ .end = IXP4XX_EthC_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct eth_plat_info ixdp425_plat_eth[] = {
{
.phy = 0,
@@ -187,10 +203,14 @@ static struct platform_device ixdp425_eth[] = {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEB,
.dev.platform_data = ixdp425_plat_eth,
+ .num_resources = ARRAY_SIZE(ixp425_npeb_resources),
+ .resource = ixp425_npeb_resources,
}, {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEC,
.dev.platform_data = ixdp425_plat_eth + 1,
+ .num_resources = ARRAY_SIZE(ixp425_npec_resources),
+ .resource = ixp425_npec_resources,
},
};
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index d2ebb7c675a8..e506d2af98ad 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -124,6 +124,22 @@ static struct platform_device vulcan_uart = {
.num_resources = ARRAY_SIZE(vulcan_uart_resources),
};
+static struct resource vulcan_npeb_resources[] = {
+ {
+ .start = IXP4XX_EthB_BASE_PHYS,
+ .end = IXP4XX_EthB_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource vulcan_npec_resources[] = {
+ {
+ .start = IXP4XX_EthC_BASE_PHYS,
+ .end = IXP4XX_EthC_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct eth_plat_info vulcan_plat_eth[] = {
[0] = {
.phy = 0,
@@ -144,6 +160,8 @@ static struct platform_device vulcan_eth[] = {
.dev = {
.platform_data = &vulcan_plat_eth[0],
},
+ .num_resources = ARRAY_SIZE(vulcan_npeb_resources),
+ .resource = vulcan_npeb_resources,
},
[1] = {
.name = "ixp4xx_eth",
@@ -151,6 +169,8 @@ static struct platform_device vulcan_eth[] = {
.dev = {
.platform_data = &vulcan_plat_eth[1],
},
+ .num_resources = ARRAY_SIZE(vulcan_npec_resources),
+ .resource = vulcan_npec_resources,
},
};
diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig
index cd0a8f46e7c6..98aa7b8ddb06 100644
--- a/drivers/net/ethernet/xscale/Kconfig
+++ b/drivers/net/ethernet/xscale/Kconfig
@@ -27,4 +27,18 @@ config IXP4XX_ETH
Say Y here if you want to use built-in Ethernet ports
on IXP4xx processor.
+config PTP_1588_CLOCK_IXP46X
+ tristate "Intel IXP46x as PTP clock"
+ depends on IXP4XX_ETH
+ depends on PTP_1588_CLOCK
+ default y
+ help
+ This driver adds support for using the IXP46X as a PTP
+ clock. This clock is only useful if your PTP programs are
+ getting hardware time stamps on the PTP Ethernet packets
+ using the SO_TIMESTAMPING API.
+
+ To compile this driver as a module, choose M here: the module
+ will be called ptp_ixp46x.
+
endif # NET_VENDOR_XSCALE
diff --git a/drivers/net/ethernet/xscale/Makefile b/drivers/net/ethernet/xscale/Makefile
index 794a519d07b3..607f91b1e878 100644
--- a/drivers/net/ethernet/xscale/Makefile
+++ b/drivers/net/ethernet/xscale/Makefile
@@ -3,4 +3,5 @@
# Makefile for the Intel XScale IXP device drivers.
#
-obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
+obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
+obj-$(CONFIG_PTP_1588_CLOCK_IXP46X) += ptp_ixp46x.o
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h b/drivers/net/ethernet/xscale/ixp46x_ts.h
index d792130e27b0..d792130e27b0 100644
--- a/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h
+++ b/drivers/net/ethernet/xscale/ixp46x_ts.h
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index 6fc04ffb22c2..269596c15133 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -29,14 +29,16 @@
#include <linux/net_tstamp.h>
#include <linux/of.h>
#include <linux/phy.h>
+#include <linux/platform_data/eth_ixp4xx.h>
#include <linux/platform_device.h>
#include <linux/ptp_classify.h>
#include <linux/slab.h>
#include <linux/module.h>
-#include <mach/ixp46x_ts.h>
#include <linux/soc/ixp4xx/npe.h>
#include <linux/soc/ixp4xx/qmgr.h>
+#include "ixp46x_ts.h"
+
#define DEBUG_DESC 0
#define DEBUG_RX 0
#define DEBUG_TX 0
@@ -517,25 +519,14 @@ static int ixp4xx_mdio_write(struct mii_bus *bus, int phy_id, int location,
return ret;
}
-static int ixp4xx_mdio_register(void)
+static int ixp4xx_mdio_register(struct eth_regs __iomem *regs)
{
int err;
if (!(mdio_bus = mdiobus_alloc()))
return -ENOMEM;
- if (cpu_is_ixp43x()) {
- /* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */
- if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEC_ETH))
- return -ENODEV;
- mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
- } else {
- /* All MII PHY accesses use NPE-B Ethernet registers */
- if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
- return -ENODEV;
- mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
- }
-
+ mdio_regs = regs;
__raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
spin_lock_init(&mdio_lock);
mdio_bus->name = "IXP4xx MII Bus";
@@ -581,8 +572,8 @@ static void ixp4xx_adjust_link(struct net_device *dev)
__raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
&port->regs->tx_control[0]);
- printk(KERN_INFO "%s: link up, speed %u Mb/s, %s duplex\n",
- dev->name, port->speed, port->duplex ? "full" : "half");
+ netdev_info(dev, "%s: link up, speed %u Mb/s, %s duplex\n",
+ dev->name, port->speed, port->duplex ? "full" : "half");
}
@@ -592,7 +583,7 @@ static inline void debug_pkt(struct net_device *dev, const char *func,
#if DEBUG_PKT_BYTES
int i;
- printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len);
+ netdev_debug(dev, "%s(%i) ", func, len);
for (i = 0; i < len; i++) {
if (i >= DEBUG_PKT_BYTES)
break;
@@ -683,7 +674,7 @@ static int eth_poll(struct napi_struct *napi, int budget)
int received = 0;
#if DEBUG_RX
- printk(KERN_DEBUG "%s: eth_poll\n", dev->name);
+ netdev_debug(dev, "eth_poll\n");
#endif
while (received < budget) {
@@ -697,23 +688,20 @@ static int eth_poll(struct napi_struct *napi, int budget)
if ((n = queue_get_desc(rxq, port, 0)) < 0) {
#if DEBUG_RX
- printk(KERN_DEBUG "%s: eth_poll napi_complete\n",
- dev->name);
+ netdev_debug(dev, "eth_poll napi_complete\n");
#endif
napi_complete(napi);
qmgr_enable_irq(rxq);
if (!qmgr_stat_below_low_watermark(rxq) &&
napi_reschedule(napi)) { /* not empty again */
#if DEBUG_RX
- printk(KERN_DEBUG "%s: eth_poll napi_reschedule succeeded\n",
- dev->name);
+ netdev_debug(dev, "eth_poll napi_reschedule succeeded\n");
#endif
qmgr_disable_irq(rxq);
continue;
}
#if DEBUG_RX
- printk(KERN_DEBUG "%s: eth_poll all done\n",
- dev->name);
+ netdev_debug(dev, "eth_poll all done\n");
#endif
return received; /* all work done */
}
@@ -778,7 +766,7 @@ static int eth_poll(struct napi_struct *napi, int budget)
}
#if DEBUG_RX
- printk(KERN_DEBUG "eth_poll(): end, not all work done\n");
+ netdev_debug(dev, "eth_poll(): end, not all work done\n");
#endif
return received; /* not all work done */
}
@@ -842,7 +830,7 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
struct desc *desc;
#if DEBUG_TX
- printk(KERN_DEBUG "%s: eth_xmit\n", dev->name);
+ netdev_debug(dev, "eth_xmit\n");
#endif
if (unlikely(skb->len > MAX_MRU)) {
@@ -897,22 +885,21 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
#if DEBUG_TX
- printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
+ netdev_debug(dev, "eth_xmit queue full\n");
#endif
netif_stop_queue(dev);
/* we could miss TX ready interrupt */
/* really empty in fact */
if (!qmgr_stat_below_low_watermark(txreadyq)) {
#if DEBUG_TX
- printk(KERN_DEBUG "%s: eth_xmit ready again\n",
- dev->name);
+ netdev_debug(dev, "eth_xmit ready again\n");
#endif
netif_wake_queue(dev);
}
}
#if DEBUG_TX
- printk(KERN_DEBUG "%s: eth_xmit end\n", dev->name);
+ netdev_debug(dev, "eth_xmit end\n");
#endif
ixp_tx_timestamp(port, skb);
@@ -1099,7 +1086,7 @@ static int init_queues(struct port *port)
int i;
if (!ports_open) {
- dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev,
+ dma_pool = dma_pool_create(DRV_NAME, port->netdev->dev.parent,
POOL_ALLOC_SIZE, 32, 0);
if (!dma_pool)
return -ENOMEM;
@@ -1186,8 +1173,7 @@ static int eth_open(struct net_device *dev)
return err;
if (npe_recv_message(npe, &msg, "ETH_GET_STATUS")) {
- printk(KERN_ERR "%s: %s not responding\n", dev->name,
- npe_name(npe));
+ netdev_err(dev, "%s not responding\n", npe_name(npe));
return -EIO;
}
port->firmware[0] = msg.byte4;
@@ -1299,7 +1285,7 @@ static int eth_close(struct net_device *dev)
msg.eth_id = port->id;
msg.byte3 = 1;
if (npe_send_recv_message(port->npe, &msg, "ETH_ENABLE_LOOPBACK"))
- printk(KERN_CRIT "%s: unable to enable loopback\n", dev->name);
+ netdev_crit(dev, "unable to enable loopback\n");
i = 0;
do { /* drain RX buffers */
@@ -1323,11 +1309,11 @@ static int eth_close(struct net_device *dev)
} while (++i < MAX_CLOSE_WAIT);
if (buffs)
- printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
- " left in NPE\n", dev->name, buffs);
+ netdev_crit(dev, "unable to drain RX queue, %i buffer(s)"
+ " left in NPE\n", buffs);
#if DEBUG_CLOSE
if (!buffs)
- printk(KERN_DEBUG "Draining RX queue took %i cycles\n", i);
+ netdev_debug(dev, "draining RX queue took %i cycles\n", i);
#endif
buffs = TX_DESCS;
@@ -1343,17 +1329,16 @@ static int eth_close(struct net_device *dev)
} while (++i < MAX_CLOSE_WAIT);
if (buffs)
- printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
- "left in NPE\n", dev->name, buffs);
+ netdev_crit(dev, "unable to drain TX queue, %i buffer(s) "
+ "left in NPE\n", buffs);
#if DEBUG_CLOSE
if (!buffs)
- printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
+ netdev_debug(dev, "draining TX queues took %i cycles\n", i);
#endif
msg.byte3 = 0;
if (npe_send_recv_message(port->npe, &msg, "ETH_DISABLE_LOOPBACK"))
- printk(KERN_CRIT "%s: unable to disable loopback\n",
- dev->name);
+ netdev_crit(dev, "unable to disable loopback\n");
phy_stop(dev->phydev);
@@ -1374,54 +1359,88 @@ static const struct net_device_ops ixp4xx_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-static int eth_init_one(struct platform_device *pdev)
+static int ixp4xx_eth_probe(struct platform_device *pdev)
{
- struct port *port;
- struct net_device *dev;
- struct eth_plat_info *plat = dev_get_platdata(&pdev->dev);
- struct phy_device *phydev = NULL;
- u32 regs_phys;
char phy_id[MII_BUS_ID_SIZE + 3];
+ struct phy_device *phydev = NULL;
+ struct device *dev = &pdev->dev;
+ struct eth_plat_info *plat;
+ resource_size_t regs_phys;
+ struct net_device *ndev;
+ struct resource *res;
+ struct port *port;
int err;
- if (!(dev = alloc_etherdev(sizeof(struct port))))
+ plat = dev_get_platdata(dev);
+
+ if (!(ndev = devm_alloc_etherdev(dev, sizeof(struct port))))
return -ENOMEM;
- SET_NETDEV_DEV(dev, &pdev->dev);
- port = netdev_priv(dev);
- port->netdev = dev;
+ SET_NETDEV_DEV(ndev, dev);
+ port = netdev_priv(ndev);
+ port->netdev = ndev;
port->id = pdev->id;
+ /* Get the port resource and remap */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+ regs_phys = res->start;
+ port->regs = devm_ioremap_resource(dev, res);
+
switch (port->id) {
case IXP4XX_ETH_NPEA:
- port->regs = (struct eth_regs __iomem *)IXP4XX_EthA_BASE_VIRT;
- regs_phys = IXP4XX_EthA_BASE_PHYS;
+ /* If the MDIO bus is not up yet, defer probe */
+ if (!mdio_bus)
+ return -EPROBE_DEFER;
break;
case IXP4XX_ETH_NPEB:
- port->regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
- regs_phys = IXP4XX_EthB_BASE_PHYS;
+ /*
+ * On all except IXP43x, NPE-B is used for the MDIO bus.
+ * If there is no NPE-B in the feature set, bail out, else
+ * register the MDIO bus.
+ */
+ if (!cpu_is_ixp43x()) {
+ if (!(ixp4xx_read_feature_bits() &
+ IXP4XX_FEATURE_NPEB_ETH0))
+ return -ENODEV;
+ /* Else register the MDIO bus on NPE-B */
+ if ((err = ixp4xx_mdio_register(port->regs)))
+ return err;
+ }
+ if (!mdio_bus)
+ return -EPROBE_DEFER;
break;
case IXP4XX_ETH_NPEC:
- port->regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
- regs_phys = IXP4XX_EthC_BASE_PHYS;
+ /*
+ * IXP43x lacks NPE-B and uses NPE-C for the MDIO bus access,
+ * of there is no NPE-C, no bus, nothing works, so bail out.
+ */
+ if (cpu_is_ixp43x()) {
+ if (!(ixp4xx_read_feature_bits() &
+ IXP4XX_FEATURE_NPEC_ETH))
+ return -ENODEV;
+ /* Else register the MDIO bus on NPE-C */
+ if ((err = ixp4xx_mdio_register(port->regs)))
+ return err;
+ }
+ if (!mdio_bus)
+ return -EPROBE_DEFER;
break;
default:
- err = -ENODEV;
- goto err_free;
+ return -ENODEV;
}
- dev->netdev_ops = &ixp4xx_netdev_ops;
- dev->ethtool_ops = &ixp4xx_ethtool_ops;
- dev->tx_queue_len = 100;
+ ndev->netdev_ops = &ixp4xx_netdev_ops;
+ ndev->ethtool_ops = &ixp4xx_ethtool_ops;
+ ndev->tx_queue_len = 100;
- netif_napi_add(dev, &port->napi, eth_poll, NAPI_WEIGHT);
+ netif_napi_add(ndev, &port->napi, eth_poll, NAPI_WEIGHT);
- if (!(port->npe = npe_request(NPE_ID(port->id)))) {
- err = -EIO;
- goto err_free;
- }
+ if (!(port->npe = npe_request(NPE_ID(port->id))))
+ return -EIO;
- port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name);
+ port->mem_res = request_mem_region(regs_phys, REGS_SIZE, ndev->name);
if (!port->mem_res) {
err = -EBUSY;
goto err_npe_rel;
@@ -1429,9 +1448,9 @@ static int eth_init_one(struct platform_device *pdev)
port->plat = plat;
npe_port_tab[NPE_ID(port->id)] = port;
- memcpy(dev->dev_addr, plat->hwaddr, ETH_ALEN);
+ memcpy(ndev->dev_addr, plat->hwaddr, ETH_ALEN);
- platform_set_drvdata(pdev, dev);
+ platform_set_drvdata(pdev, ndev);
__raw_writel(DEFAULT_CORE_CNTRL | CORE_RESET,
&port->regs->core_control);
@@ -1441,7 +1460,7 @@ static int eth_init_one(struct platform_device *pdev)
snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
mdio_bus->id, plat->phy);
- phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
+ phydev = phy_connect(ndev, phy_id, &ixp4xx_adjust_link,
PHY_INTERFACE_MODE_MII);
if (IS_ERR(phydev)) {
err = PTR_ERR(phydev);
@@ -1450,11 +1469,11 @@ static int eth_init_one(struct platform_device *pdev)
phydev->irq = PHY_POLL;
- if ((err = register_netdev(dev)))
+ if ((err = register_netdev(ndev)))
goto err_phy_dis;
- printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
- npe_name(port->npe));
+ netdev_info(ndev, "%s: MII PHY %i on %s\n", ndev->name, plat->phy,
+ npe_name(port->npe));
return 0;
@@ -1465,58 +1484,32 @@ err_free_mem:
release_resource(port->mem_res);
err_npe_rel:
npe_release(port->npe);
-err_free:
- free_netdev(dev);
return err;
}
-static int eth_remove_one(struct platform_device *pdev)
+static int ixp4xx_eth_remove(struct platform_device *pdev)
{
- struct net_device *dev = platform_get_drvdata(pdev);
- struct phy_device *phydev = dev->phydev;
- struct port *port = netdev_priv(dev);
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct phy_device *phydev = ndev->phydev;
+ struct port *port = netdev_priv(ndev);
- unregister_netdev(dev);
+ unregister_netdev(ndev);
phy_disconnect(phydev);
+ ixp4xx_mdio_remove();
npe_port_tab[NPE_ID(port->id)] = NULL;
npe_release(port->npe);
release_resource(port->mem_res);
- free_netdev(dev);
return 0;
}
static struct platform_driver ixp4xx_eth_driver = {
.driver.name = DRV_NAME,
- .probe = eth_init_one,
- .remove = eth_remove_one,
+ .probe = ixp4xx_eth_probe,
+ .remove = ixp4xx_eth_remove,
};
-
-static int __init eth_init_module(void)
-{
- int err;
-
- /*
- * FIXME: we bail out on device tree boot but this really needs
- * to be fixed in a nicer way: this registers the MDIO bus before
- * even matching the driver infrastructure, we should only probe
- * detected hardware.
- */
- if (of_have_populated_dt())
- return -ENODEV;
- if ((err = ixp4xx_mdio_register()))
- return err;
- return platform_driver_register(&ixp4xx_eth_driver);
-}
-
-static void __exit eth_cleanup_module(void)
-{
- platform_driver_unregister(&ixp4xx_eth_driver);
- ixp4xx_mdio_remove();
-}
+module_platform_driver(ixp4xx_eth_driver);
MODULE_AUTHOR("Krzysztof Halasa");
MODULE_DESCRIPTION("Intel IXP4xx Ethernet driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:ixp4xx_eth");
-module_init(eth_init_module);
-module_exit(eth_cleanup_module);
diff --git a/drivers/ptp/ptp_ixp46x.c b/drivers/net/ethernet/xscale/ptp_ixp46x.c
index 67028484e9a0..9ecc395239e9 100644
--- a/drivers/ptp/ptp_ixp46x.c
+++ b/drivers/net/ethernet/xscale/ptp_ixp46x.c
@@ -15,7 +15,8 @@
#include <linux/module.h>
#include <linux/ptp_clock_kernel.h>
-#include <mach/ixp46x_ts.h>
+
+#include "ixp46x_ts.h"
#define DRIVER "ptp_ixp46x"
#define N_EXT_TS 2
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index dd1a147f2971..4530840e15ef 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -315,7 +315,8 @@ config DSCC4_PCI_RST
config IXP4XX_HSS
tristate "Intel IXP4xx HSS (synchronous serial port) support"
- depends on HDLC && ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
+ depends on HDLC && IXP4XX_NPE && IXP4XX_QMGR
+ depends on ARCH_IXP4XX
help
Say Y here if you want to use built-in HSS ports
on IXP4xx processor.
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index ea6ee6a608ce..7c5cf77e9ef1 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/wan_ixp4xx_hss.h>
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/soc/ixp4xx/npe.h>
@@ -258,7 +259,7 @@ struct port {
struct hss_plat_info *plat;
buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
struct desc *desc_tab; /* coherent */
- u32 desc_tab_phys;
+ dma_addr_t desc_tab_phys;
unsigned int id;
unsigned int clock_type, clock_rate, loopback;
unsigned int initialized, carrier;
@@ -858,7 +859,7 @@ static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
dev->stats.tx_dropped++;
return NETDEV_TX_OK;
}
- memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
+ memcpy_swab32(mem, (u32 *)((uintptr_t)skb->data & ~3), bytes / 4);
dev_kfree_skb(skb);
#endif
@@ -1182,14 +1183,14 @@ static int hss_hdlc_attach(struct net_device *dev, unsigned short encoding,
}
}
-static u32 check_clock(u32 rate, u32 a, u32 b, u32 c,
+static u32 check_clock(u32 timer_freq, u32 rate, u32 a, u32 b, u32 c,
u32 *best, u32 *best_diff, u32 *reg)
{
/* a is 10-bit, b is 10-bit, c is 12-bit */
u64 new_rate;
u32 new_diff;
- new_rate = ixp4xx_timer_freq * (u64)(c + 1);
+ new_rate = timer_freq * (u64)(c + 1);
do_div(new_rate, a * (c + 1) + b + 1);
new_diff = abs((u32)new_rate - rate);
@@ -1201,40 +1202,43 @@ static u32 check_clock(u32 rate, u32 a, u32 b, u32 c,
return new_diff;
}
-static void find_best_clock(u32 rate, u32 *best, u32 *reg)
+static void find_best_clock(u32 timer_freq, u32 rate, u32 *best, u32 *reg)
{
u32 a, b, diff = 0xFFFFFFFF;
- a = ixp4xx_timer_freq / rate;
+ a = timer_freq / rate;
if (a > 0x3FF) { /* 10-bit value - we can go as slow as ca. 65 kb/s */
- check_clock(rate, 0x3FF, 1, 1, best, &diff, reg);
+ check_clock(timer_freq, rate, 0x3FF, 1, 1, best, &diff, reg);
return;
}
if (a == 0) { /* > 66.666 MHz */
a = 1; /* minimum divider is 1 (a = 0, b = 1, c = 1) */
- rate = ixp4xx_timer_freq;
+ rate = timer_freq;
}
- if (rate * a == ixp4xx_timer_freq) { /* don't divide by 0 later */
- check_clock(rate, a - 1, 1, 1, best, &diff, reg);
+ if (rate * a == timer_freq) { /* don't divide by 0 later */
+ check_clock(timer_freq, rate, a - 1, 1, 1, best, &diff, reg);
return;
}
for (b = 0; b < 0x400; b++) {
u64 c = (b + 1) * (u64)rate;
- do_div(c, ixp4xx_timer_freq - rate * a);
+ do_div(c, timer_freq - rate * a);
c--;
if (c >= 0xFFF) { /* 12-bit - no need to check more 'b's */
if (b == 0 && /* also try a bit higher rate */
- !check_clock(rate, a - 1, 1, 1, best, &diff, reg))
+ !check_clock(timer_freq, rate, a - 1, 1, 1, best,
+ &diff, reg))
return;
- check_clock(rate, a, b, 0xFFF, best, &diff, reg);
+ check_clock(timer_freq, rate, a, b, 0xFFF, best,
+ &diff, reg);
return;
}
- if (!check_clock(rate, a, b, c, best, &diff, reg))
+ if (!check_clock(timer_freq, rate, a, b, c, best, &diff, reg))
return;
- if (!check_clock(rate, a, b, c + 1, best, &diff, reg))
+ if (!check_clock(timer_freq, rate, a, b, c + 1, best, &diff,
+ reg))
return;
}
}
@@ -1285,8 +1289,9 @@ static int hss_hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
port->clock_type = clk; /* Update settings */
if (clk == CLOCK_INT)
- find_best_clock(new_line.clock_rate, &port->clock_rate,
- &port->clock_reg);
+ find_best_clock(port->plat->timer_freq,
+ new_line.clock_rate,
+ &port->clock_rate, &port->clock_reg);
else {
port->clock_rate = 0;
port->clock_reg = CLK42X_SPEED_2048KHZ;
diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index c382158f587d..475c60dccaa4 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -56,20 +56,6 @@ config PTP_1588_CLOCK_QORIQ
To compile this driver as a module, choose M here: the module
will be called ptp-qoriq.
-config PTP_1588_CLOCK_IXP46X
- tristate "Intel IXP46x as PTP clock"
- depends on IXP4XX_ETH
- depends on PTP_1588_CLOCK
- default y
- help
- This driver adds support for using the IXP46X as a PTP
- clock. This clock is only useful if your PTP programs are
- getting hardware time stamps on the PTP Ethernet packets
- using the SO_TIMESTAMPING API.
-
- To compile this driver as a module, choose M here: the module
- will be called ptp_ixp46x.
-
comment "Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks."
depends on PHYLIB=n || NETWORK_PHY_TIMESTAMPING=n
diff --git a/drivers/ptp/Makefile b/drivers/ptp/Makefile
index 3fb91bebbaf7..8c830336f178 100644
--- a/drivers/ptp/Makefile
+++ b/drivers/ptp/Makefile
@@ -7,10 +7,9 @@ ptp-y := ptp_clock.o ptp_chardev.o ptp_sysfs.o
obj-$(CONFIG_PTP_1588_CLOCK) += ptp.o
obj-$(CONFIG_PTP_1588_CLOCK_DTE) += ptp_dte.o
obj-$(CONFIG_PTP_1588_CLOCK_INES) += ptp_ines.o
-obj-$(CONFIG_PTP_1588_CLOCK_IXP46X) += ptp_ixp46x.o
obj-$(CONFIG_PTP_1588_CLOCK_PCH) += ptp_pch.o
obj-$(CONFIG_PTP_1588_CLOCK_KVM) += ptp_kvm.o
obj-$(CONFIG_PTP_1588_CLOCK_QORIQ) += ptp-qoriq.o
ptp-qoriq-y += ptp_qoriq.o
ptp-qoriq-$(CONFIG_DEBUG_FS) += ptp_qoriq_debugfs.o
-obj-$(CONFIG_PTP_1588_CLOCK_IDTCM) += ptp_clockmatrix.o \ No newline at end of file
+obj-$(CONFIG_PTP_1588_CLOCK_IDTCM) += ptp_clockmatrix.o
diff --git a/include/linux/platform_data/eth_ixp4xx.h b/include/linux/platform_data/eth_ixp4xx.h
new file mode 100644
index 000000000000..6f652ea0c6ae
--- /dev/null
+++ b/include/linux/platform_data/eth_ixp4xx.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PLATFORM_DATA_ETH_IXP4XX
+#define __PLATFORM_DATA_ETH_IXP4XX
+
+#include <linux/types.h>
+
+#define IXP4XX_ETH_NPEA 0x00
+#define IXP4XX_ETH_NPEB 0x10
+#define IXP4XX_ETH_NPEC 0x20
+
+/* Information about built-in Ethernet MAC interfaces */
+struct eth_plat_info {
+ u8 phy; /* MII PHY ID, 0 - 31 */
+ u8 rxq; /* configurable, currently 0 - 31 only */
+ u8 txreadyq;
+ u8 hwaddr[6];
+};
+
+#endif
diff --git a/include/linux/platform_data/wan_ixp4xx_hss.h b/include/linux/platform_data/wan_ixp4xx_hss.h
new file mode 100644
index 000000000000..d525a0feb9e1
--- /dev/null
+++ b/include/linux/platform_data/wan_ixp4xx_hss.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PLATFORM_DATA_WAN_IXP4XX_HSS_H
+#define __PLATFORM_DATA_WAN_IXP4XX_HSS_H
+
+#include <linux/types.h>
+
+/* Information about built-in HSS (synchronous serial) interfaces */
+struct hss_plat_info {
+ int (*set_clock)(int port, unsigned int clock_type);
+ int (*open)(int port, void *pdev,
+ void (*set_carrier_cb)(void *pdev, int carrier));
+ void (*close)(int port, void *pdev);
+ u8 txreadyq;
+ u32 timer_freq;
+};
+
+#endif
generated by cgit (git 2.34.1) at 2025-12-26 04:02:22 +0000