diff options
| -rw-r--r-- | arch/mips/sgi-ip27/TODO | 19 | ||||
| -rw-r--r-- | drivers/scsi/aacraid/TODO | 3 | ||||
| -rw-r--r-- | fs/befs/TODO | 14 | ||||
| -rw-r--r-- | fs/jffs2/TODO | 37 | ||||
| -rw-r--r-- | net/ax25/TODO | 20 | ||||
| -rw-r--r-- | net/decnet/TODO | 40 |
6 files changed, 0 insertions, 133 deletions
diff --git a/arch/mips/sgi-ip27/TODO b/arch/mips/sgi-ip27/TODO deleted file mode 100644 index 160857ff1483..000000000000 --- a/arch/mips/sgi-ip27/TODO +++ /dev/null @@ -1,19 +0,0 @@ -1. Need to figure out why PCI writes to the IOC3 hang, and if it is okay -not to write to the IOC3 ever. -2. Need to figure out RRB allocation in bridge_startup(). -3. Need to figure out why address swaizzling is needed in inw/outw for -Qlogic scsi controllers. -4. Need to integrate ip27-klconfig.c:find_lboard and -ip27-init.c:find_lbaord_real. DONE -5. Is it okay to set calias space on all nodes as 0, instead of 8k as -in irix? -6. Investigate why things do not work without the setup_test() call -being invoked on all nodes in ip27-memory.c. -8. Too many do_page_faults invoked - investigate. -9. start_thread must turn off UX64 ... and define tlb_refill_debug. -10. Need a bad pmd table, bad pte table. __bad_pmd_table/__bad_pagetable -does not agree with pgd_bad/pmd_bad. -11. All intrs (ip27_do_irq handlers) are targeted at cpu A on the node. -This might need to change later. Only the timer intr is set up to be -received on both Cpu A and B. (ip27_do_irq()/bridge_startup()) -13. Cache flushing (specially the SMP version) has to be investigated. diff --git a/drivers/scsi/aacraid/TODO b/drivers/scsi/aacraid/TODO deleted file mode 100644 index 78dc863eff4f..000000000000 --- a/drivers/scsi/aacraid/TODO +++ /dev/null @@ -1,3 +0,0 @@ -o Testing -o More testing -o I/O size increase diff --git a/fs/befs/TODO b/fs/befs/TODO deleted file mode 100644 index 3250921aa2e6..000000000000 --- a/fs/befs/TODO +++ /dev/null @@ -1,14 +0,0 @@ -TODO -========== - -* Convert comments to the Kernel-Doc format. - -* Befs_fs.h has gotten big and messy. No reason not to break it up into - smaller peices. - -* See if Alexander Viro's option parser made it into the kernel tree. - Use that if we can. (include/linux/parser.h) - -* See if we really need separate types for on-disk and in-memory - representations of the superblock and inode. - diff --git a/fs/jffs2/TODO b/fs/jffs2/TODO deleted file mode 100644 index ca28964abd4b..000000000000 --- a/fs/jffs2/TODO +++ /dev/null @@ -1,37 +0,0 @@ - - - support asynchronous operation -- add a per-fs 'reserved_space' count, - let each outstanding write reserve the _maximum_ amount of physical - space it could take. Let GC flush the outstanding writes because the - reservations will necessarily be pessimistic. With this we could even - do shared writable mmap, if we can have a fs hook for do_wp_page() to - make the reservation. - - disable compression in commit_write()? - - fine-tune the allocation / GC thresholds - - chattr support - turning on/off and tuning compression per-inode - - checkpointing (do we need this? scan is quite fast) - - make the scan code populate real inodes so read_inode just after - mount doesn't have to read the flash twice for large files. - Make this a per-inode option, changeable with chattr, so you can - decide which inodes should be in-core immediately after mount. - - test, test, test - - - NAND flash support: - - almost done :) - - use bad block check instead of the hardwired byte check - - - Optimisations: - - Split writes so they go to two separate blocks rather than just c->nextblock. - By writing _new_ nodes to one block, and garbage-collected REF_PRISTINE - nodes to a different one, we can separate clean nodes from those which - are likely to become dirty, and end up with blocks which are each far - closer to 100% or 0% clean, hence speeding up later GC progress dramatically. - - Stop keeping name in-core with struct jffs2_full_dirent. If we keep the hash in - the full dirent, we only need to go to the flash in lookup() when we think we've - got a match, and in readdir(). - - Doubly-linked next_in_ino list to allow us to free obsoleted raw_node_refs immediately? - - Remove size from jffs2_raw_node_frag. - -dedekind: -1. __jffs2_flush_wbuf() has a strange 'pad' parameter. Eliminate. -2. get_sb()->build_fs()->scan() path... Why get_sb() removes scan()'s crap in - case of failure? scan() does not clean everything. Fix. diff --git a/net/ax25/TODO b/net/ax25/TODO deleted file mode 100644 index 69fb4e368d92..000000000000 --- a/net/ax25/TODO +++ /dev/null @@ -1,20 +0,0 @@ -Do the ax25_list_lock, ax25_dev_lock, linkfail_lockreally, ax25_frag_lock and -listen_lock have to be bh-safe? - -Do the netrom and rose locks have to be bh-safe? - -A device might be deleted after lookup in the SIOCADDRT ioctl but before it's -being used. - -Routes to a device being taken down might be deleted by ax25_rt_device_down -but added by somebody else before the device has been deleted fully. - -The ax25_rt_find_route synopsys is pervert but I somehow had to deal with -the race caused by the static variable in it's previous implementation. - -Implement proper socket locking in netrom and rose. - -Check socket locking when ax25_rcv is sending to raw sockets. In particular -ax25_send_to_raw() seems fishy. Heck - ax25_rcv is fishy. - -Handle XID and TEST frames properly. diff --git a/net/decnet/TODO b/net/decnet/TODO deleted file mode 100644 index 358e9eb49016..000000000000 --- a/net/decnet/TODO +++ /dev/null @@ -1,40 +0,0 @@ -Steve's quick list of things that need finishing off: -[they are in no particular order and range from the trivial to the long winded] - - o Proper timeouts on each neighbour (in routing mode) rather than - just the 60 second On-Ethernet cache value. - - o Support for X.25 linklayer - - o Support for DDCMP link layer - - o The DDCMP device itself - - o PPP support (rfc1762) - - o Lots of testing with real applications - - o Verify errors etc. against POSIX 1003.1g (draft) - - o Using send/recvmsg() to get at connect/disconnect data (POSIX 1003.1g) - [maybe this should be done at socket level... the control data in the - send/recvmsg() calls should simply be a vector of set/getsockopt() - calls] - - o check MSG_CTRUNC is set where it should be. - - o Find all the commonality between DECnet and IPv4 routing code and extract - it into a small library of routines. [probably a project for 2.7.xx] - - o Add perfect socket hashing - an idea suggested by Paul Koning. Currently - we have a half-way house scheme which seems to work reasonably well, but - the full scheme is still worth implementing, its not not top of my list - right now. - - o Add session control message flow control - - o Add NSP message flow control - - o DECnet sendpages() function - - o AIO for DECnet |