summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/input/event-codes.rst25
-rw-r--r--drivers/hid/hid-haptic.c2
-rw-r--r--drivers/input/keyboard/cros_ec_keyb.c6
-rw-r--r--drivers/input/keyboard/imx_sc_key.c2
-rw-r--r--drivers/input/tablet/pegasus_notetaker.c9
-rw-r--r--drivers/input/touchscreen/goodix.c28
-rw-r--r--drivers/input/touchscreen/goodix.h1
-rw-r--r--include/uapi/linux/input-event-codes.h2
8 files changed, 38 insertions, 37 deletions
diff --git a/Documentation/input/event-codes.rst b/Documentation/input/event-codes.rst
index 1ead9bb8d9c6..4424cbff251f 100644
--- a/Documentation/input/event-codes.rst
+++ b/Documentation/input/event-codes.rst
@@ -400,19 +400,30 @@ can report through the rotational axes (absolute and/or relative rx, ry, rz).
All other axes retain their meaning. A device must not mix
regular directional axes and accelerometer axes on the same event node.
-INPUT_PROP_HAPTIC_TOUCHPAD
---------------------------
+INPUT_PROP_PRESSUREPAD
+----------------------
+
+The INPUT_PROP_PRESSUREPAD property indicates that the device provides
+simulated haptic feedback (e.g. a vibrator motor situated below the surface)
+instead of physical haptic feedback (e.g. a hinge). This property is only set
+if the device:
-The INPUT_PROP_HAPTIC_TOUCHPAD property indicates that device:
-- supports simple haptic auto and manual triggering
- can differentiate between at least 5 fingers
- uses correct resolution for the X/Y (units and value)
-- reports correct force per touch, and correct units for them (newtons or grams)
- follows the MT protocol type B
+If the simulated haptic feedback is controllable by userspace the device must:
+
+- support simple haptic auto and manual triggering, and
+- report correct force per touch, and correct units for them (newtons or grams), and
+- provide the EV_FF FF_HAPTIC force feedback effect.
+
Summing up, such devices follow the MS spec for input devices in
-Win8 and Win8.1, and in addition support the Simple haptic controller HID table,
-and report correct units for the pressure.
+Win8 and Win8.1, and in addition may support the Simple haptic controller HID
+table, and report correct units for the pressure.
+
+Where applicable, this property is set in addition to INPUT_PROP_BUTTONPAD, it
+does not replace that property.
Guidelines
==========
diff --git a/drivers/hid/hid-haptic.c b/drivers/hid/hid-haptic.c
index aa090684c1f2..fc8a9997f815 100644
--- a/drivers/hid/hid-haptic.c
+++ b/drivers/hid/hid-haptic.c
@@ -86,7 +86,7 @@ int hid_haptic_input_configured(struct hid_device *hdev,
if (hi->application == HID_DG_TOUCHPAD) {
if (haptic->auto_trigger_report &&
haptic->manual_trigger_report) {
- __set_bit(INPUT_PROP_HAPTIC_TOUCHPAD, hi->input->propbit);
+ __set_bit(INPUT_PROP_PRESSUREPAD, hi->input->propbit);
return 1;
}
return 0;
diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
index f7209c8ebbcc..1c6b0461dc35 100644
--- a/drivers/input/keyboard/cros_ec_keyb.c
+++ b/drivers/input/keyboard/cros_ec_keyb.c
@@ -261,6 +261,12 @@ static int cros_ec_keyb_work(struct notifier_block *nb,
case EC_MKBP_EVENT_KEY_MATRIX:
pm_wakeup_event(ckdev->dev, 0);
+ if (!ckdev->idev) {
+ dev_warn_once(ckdev->dev,
+ "Unexpected key matrix event\n");
+ return NOTIFY_OK;
+ }
+
if (ckdev->ec->event_size != ckdev->cols) {
dev_err(ckdev->dev,
"Discarded incomplete key matrix event.\n");
diff --git a/drivers/input/keyboard/imx_sc_key.c b/drivers/input/keyboard/imx_sc_key.c
index d18839f1f4f6..b620cd310cdb 100644
--- a/drivers/input/keyboard/imx_sc_key.c
+++ b/drivers/input/keyboard/imx_sc_key.c
@@ -158,7 +158,7 @@ static int imx_sc_key_probe(struct platform_device *pdev)
return error;
}
- error = devm_add_action_or_reset(&pdev->dev, imx_sc_key_action, &priv);
+ error = devm_add_action_or_reset(&pdev->dev, imx_sc_key_action, priv);
if (error)
return error;
diff --git a/drivers/input/tablet/pegasus_notetaker.c b/drivers/input/tablet/pegasus_notetaker.c
index 8d6b71d59793..eabb4a0b8a0d 100644
--- a/drivers/input/tablet/pegasus_notetaker.c
+++ b/drivers/input/tablet/pegasus_notetaker.c
@@ -63,6 +63,9 @@
#define BUTTON_PRESSED 0xb5
#define COMMAND_VERSION 0xa9
+/* 1 Status + 1 Color + 2 X + 2 Y = 6 bytes */
+#define NOTETAKER_PACKET_SIZE 6
+
/* in xy data packet */
#define BATTERY_NO_REPORT 0x40
#define BATTERY_LOW 0x41
@@ -311,6 +314,12 @@ static int pegasus_probe(struct usb_interface *intf,
}
pegasus->data_len = usb_maxpacket(dev, pipe);
+ if (pegasus->data_len < NOTETAKER_PACKET_SIZE) {
+ dev_err(&intf->dev, "packet size is too small (%d)\n",
+ pegasus->data_len);
+ error = -EINVAL;
+ goto err_free_mem;
+ }
pegasus->data = usb_alloc_coherent(dev, pegasus->data_len, GFP_KERNEL,
&pegasus->data_dma);
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 252dcae039f8..f8798d11ec03 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -796,17 +796,6 @@ int goodix_reset_no_int_sync(struct goodix_ts_data *ts)
usleep_range(6000, 10000); /* T4: > 5ms */
- /*
- * Put the reset pin back in to input / high-impedance mode to save
- * power. Only do this in the non ACPI case since some ACPI boards
- * don't have a pull-up, so there the reset pin must stay active-high.
- */
- if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) {
- error = gpiod_direction_input(ts->gpiod_rst);
- if (error)
- goto error;
- }
-
return 0;
error:
@@ -957,14 +946,6 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
return -EINVAL;
}
- /*
- * Normally we put the reset pin in input / high-impedance mode to save
- * power. But some x86/ACPI boards don't have a pull-up, so for the ACPI
- * case, leave the pin as is. This results in the pin not being touched
- * at all on x86/ACPI boards, except when needed for error-recover.
- */
- ts->gpiod_rst_flags = GPIOD_ASIS;
-
return devm_acpi_dev_add_driver_gpios(dev, gpio_mapping);
}
#else
@@ -989,12 +970,6 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
return -EINVAL;
dev = &ts->client->dev;
- /*
- * By default we request the reset pin as input, leaving it in
- * high-impedance when not resetting the controller to save power.
- */
- ts->gpiod_rst_flags = GPIOD_IN;
-
ts->avdd28 = devm_regulator_get(dev, "AVDD28");
if (IS_ERR(ts->avdd28))
return dev_err_probe(dev, PTR_ERR(ts->avdd28), "Failed to get AVDD28 regulator\n");
@@ -1019,7 +994,7 @@ retry_get_irq_gpio:
ts->gpiod_int = gpiod;
/* Get the reset line GPIO pin number */
- gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, ts->gpiod_rst_flags);
+ gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, GPIOD_ASIS);
if (IS_ERR(gpiod))
return dev_err_probe(dev, PTR_ERR(gpiod), "Failed to get %s GPIO\n",
GOODIX_GPIO_RST_NAME);
@@ -1557,6 +1532,7 @@ MODULE_DEVICE_TABLE(i2c, goodix_ts_id);
static const struct acpi_device_id goodix_acpi_match[] = {
{ "GDIX1001", 0 },
{ "GDIX1002", 0 },
+ { "GDIX1003", 0 },
{ "GDX9110", 0 },
{ }
};
diff --git a/drivers/input/touchscreen/goodix.h b/drivers/input/touchscreen/goodix.h
index 87797cc88b32..0d1e8a8d2cba 100644
--- a/drivers/input/touchscreen/goodix.h
+++ b/drivers/input/touchscreen/goodix.h
@@ -88,7 +88,6 @@ struct goodix_ts_data {
struct gpio_desc *gpiod_rst;
int gpio_count;
int gpio_int_idx;
- enum gpiod_flags gpiod_rst_flags;
char id[GOODIX_ID_MAX_LEN + 1];
char cfg_name[64];
u16 version;
diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
index 9cd89bcc1d9c..30f3c9eaafaa 100644
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -27,7 +27,7 @@
#define INPUT_PROP_TOPBUTTONPAD 0x04 /* softbuttons at top of pad */
#define INPUT_PROP_POINTING_STICK 0x05 /* is a pointing stick */
#define INPUT_PROP_ACCELEROMETER 0x06 /* has accelerometer */
-#define INPUT_PROP_HAPTIC_TOUCHPAD 0x07 /* is a haptic touchpad */
+#define INPUT_PROP_PRESSUREPAD 0x07 /* pressure triggers clicks */
#define INPUT_PROP_MAX 0x1f
#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1)
generated by cgit (git 2.34.1) at 2025-11-25 18:58:15 +0000