diff options
Diffstat (limited to 'Documentation/arch')
| -rw-r--r-- | Documentation/arch/arm64/silicon-errata.rst | 2 | ||||
| -rw-r--r-- | Documentation/arch/openrisc/openrisc_port.rst | 6 | ||||
| -rw-r--r-- | Documentation/arch/x86/amd_hsmp.rst | 30 |
3 files changed, 38 insertions, 0 deletions
diff --git a/Documentation/arch/arm64/silicon-errata.rst b/Documentation/arch/arm64/silicon-errata.rst index f968c13b46a7..b18ef4064bc0 100644 --- a/Documentation/arch/arm64/silicon-errata.rst +++ b/Documentation/arch/arm64/silicon-errata.rst @@ -57,6 +57,8 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | Ampere | AmpereOne AC04 | AC04_CPU_10 | AMPERE_ERRATUM_AC03_CPU_38 | +----------------+-----------------+-----------------+-----------------------------+ +| Ampere | AmpereOne AC04 | AC04_CPU_23 | AMPERE_ERRATUM_AC04_CPU_23 | ++----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A510 | #2457168 | ARM64_ERRATUM_2457168 | +----------------+-----------------+-----------------+-----------------------------+ diff --git a/Documentation/arch/openrisc/openrisc_port.rst b/Documentation/arch/openrisc/openrisc_port.rst index a8f307a3b499..60b0a9e51d70 100644 --- a/Documentation/arch/openrisc/openrisc_port.rst +++ b/Documentation/arch/openrisc/openrisc_port.rst @@ -40,6 +40,12 @@ Build the Linux kernel as usual:: make ARCH=openrisc CROSS_COMPILE="or1k-linux-" defconfig make ARCH=openrisc CROSS_COMPILE="or1k-linux-" +If you want to embed initramfs in the kernel, also pass ``CONFIG_INITRAMFS_SOURCE``. For example:: + + make ARCH=openrisc CROSS_COMPILE="or1k-linux-" CONFIG_INITRAMFS_SOURCE="path/to/rootfs path/to/devnodes" + +For more information on this, please check Documentation/filesystems/ramfs-rootfs-initramfs.rst. + 3) Running on FPGA (optional) The OpenRISC community typically uses FuseSoC to manage building and programming diff --git a/Documentation/arch/x86/amd_hsmp.rst b/Documentation/arch/x86/amd_hsmp.rst index 2fd917638e42..a094f55c10b0 100644 --- a/Documentation/arch/x86/amd_hsmp.rst +++ b/Documentation/arch/x86/amd_hsmp.rst @@ -71,6 +71,28 @@ Note: lseek() is not supported as entire metrics table is read. Metrics table definitions will be documented as part of Public PPR. The same is defined in the amd_hsmp.h header. +2. HSMP telemetry sysfs files + +Following sysfs files are available at /sys/devices/platform/AMDI0097:0X/. + +* c0_residency_input: Percentage of cores in C0 state. +* prochot_status: Reports 1 if the processor is at thermal threshold value, + 0 otherwise. +* smu_fw_version: SMU firmware version. +* protocol_version: HSMP interface version. +* ddr_max_bw: Theoretical maximum DDR bandwidth in GB/s. +* ddr_utilised_bw_input: Current utilized DDR bandwidth in GB/s. +* ddr_utilised_bw_perc_input(%): Percentage of current utilized DDR bandwidth. +* mclk_input: Memory clock in MHz. +* fclk_input: Fabric clock in MHz. +* clk_fmax: Maximum frequency of socket in MHz. +* clk_fmin: Minimum frequency of socket in MHz. +* cclk_freq_limit_input: Core clock frequency limit per socket in MHz. +* pwr_current_active_freq_limit: Current active frequency limit of socket + in MHz. +* pwr_current_active_freq_limit_source: Source of current active frequency + limit. + ACPI device object format ========================= The ACPI object format expected from the amd_hsmp driver @@ -116,6 +138,14 @@ for socket with ID00 is given below:: }) } +HSMP HWMON interface +==================== +HSMP power sensors are registered with the hwmon interface. A separate hwmon +directory is created for each socket and the following files are generated +within the hwmon directory. +- power1_input (read only) +- power1_cap_max (read only) +- power1_cap (read, write) An example ========== |