1 files changed, 0 insertions, 73 deletions
diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
deleted file mode 100644
index 0a3647fe331b..000000000000
--- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-* Microsemi - vsc8531 Giga bit ethernet phy
-
-Optional properties:
-- vsc8531,vddmac	: The vddmac in mV. Allowed values is listed
-			  in the first row of Table 1 (below).
-			  This property is only used in combination
-			  with the 'edge-slowdown' property.
-			  Default value is 3300.
-- vsc8531,edge-slowdown	: % the edge should be slowed down relative to
-			  the fastest possible edge time.
-			  Edge rate sets the drive strength of the MAC
-			  interface output signals.  Changing the
-			  drive strength will affect the edge rate of
-			  the output signal.  The goal of this setting
-			  is to help reduce electrical emission (EMI)
-			  by being able to reprogram drive strength
-			  and in effect slow down the edge rate if
-			  desired.
-			  To adjust the edge-slowdown, the 'vddmac'
-			  must be specified. Table 1 lists the
-			  supported edge-slowdown values for a given
-			  'vddmac'.
-			  Default value is 0%.
-			  Ref: Table:1 - Edge rate change (below).
-- vsc8531,led-[N]-mode	: LED mode. Specify how the LED[N] should behave.
-			  N depends on the number of LEDs supported by a
-			  PHY.
-			  Allowed values are defined in
-			  "include/dt-bindings/net/mscc-phy-vsc8531.h".
-			  Default values are VSC8531_LINK_1000_ACTIVITY (1),
-			  VSC8531_LINK_100_ACTIVITY (2),
-			  VSC8531_LINK_ACTIVITY (0) and
-			  VSC8531_DUPLEX_COLLISION (8).
-- load-save-gpios	: GPIO used for the load/save operation of the PTP
-			  hardware clock (PHC).
-
-
-Table: 1 - Edge rate change
-----------------------------------------------------------------|
-| 		Edge Rate Change (VDDMAC)			|
-|								|
-| 3300 mV	2500 mV		1800 mV		1500 mV		|
-|---------------------------------------------------------------|
-| 0%		0%		0%		0%		|
-| (Fastest)			(recommended)	(recommended)	|
-|---------------------------------------------------------------|
-| 2%		3%		5%		6%		|
-|---------------------------------------------------------------|
-| 4%		6%		9%		14%		|
-|---------------------------------------------------------------|
-| 7%		10%		16%		21%		|
-|(recommended)	(recommended)					|
-|---------------------------------------------------------------|
-| 10%		14%		23%		29%		|
-|---------------------------------------------------------------|
-| 17%		23%		35%		42%		|
-|---------------------------------------------------------------|
-| 29%		37%		52%		58%		|
-|---------------------------------------------------------------|
-| 53%		63%		76%		77%		|
-| (slowest)							|
-|---------------------------------------------------------------|
-
-Example:
-
-        vsc8531_0: ethernet-phy@0 {
-                compatible = "ethernet-phy-id0007.0570";
-                vsc8531,vddmac		= <3300>;
-                vsc8531,edge-slowdown	= <7>;
-                vsc8531,led-0-mode	= <VSC8531_LINK_1000_ACTIVITY>;
-                vsc8531,led-1-mode	= <VSC8531_LINK_100_ACTIVITY>;
-		load-save-gpios		= <&gpio 10 GPIO_ACTIVE_HIGH>;
-        };