1 files changed, 0 insertions, 102 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt
deleted file mode 100644
index 40e0a9a19525..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-Broadcom Northstar2 IOMUX Controller
-
-The Northstar2 IOMUX controller supports group based mux configuration. There
-are some individual pins that support modifying the pinconf parameters.
-
-Required properties:
-
-- compatible:
-    Must be "brcm,ns2-pinmux"
-
-- reg:
-    Define the base and range of the I/O address space that contains the
-    Northstar2 IOMUX and pin configuration registers.
-
-Properties in sub nodes:
-
-- function:
-    The mux function to select
-
-- groups:
-    The list of groups to select with a given function
-
-- pins:
-    List of pin names to change configuration
-
-The generic properties bias-disable, bias-pull-down, bias-pull-up,
-drive-strength, slew-rate, input-enable, input-disable are supported
-for some individual pins listed at the end.
-
-For more details, refer to
-Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-For example:
-
-	pinctrl: pinctrl@6501d130 {
-		compatible = "brcm,ns2-pinmux";
-		reg = <0x6501d130 0x08>,
-		      <0x660a0028 0x04>,
-		      <0x660009b0 0x40>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&nand_sel>, <&uart3_rx>, <&sdio0_d4>;
-
-		/* Select nand function */
-		nand_sel: nand_sel {
-			function = "nand";
-			groups = "nand_grp";
-		};
-
-		/* Pull up the uart3 rx pin */
-		uart3_rx: uart3_rx {
-			pins = "uart3_sin";
-			bias-pull-up;
-		};
-
-		/* Set the drive strength of sdio d4 pin */
-		sdio0_d4: sdio0_d4 {
-			pins = "sdio0_data4";
-			drive-strength = <8>;
-		};
-	};
-
-List of supported functions and groups in Northstar2:
-
-"nand": "nand_grp"
-
-"nor": "nor_data_grp", "nor_adv_grp", "nor_addr_0_3_grp", "nor_addr_4_5_grp",
-	"nor_addr_6_7_grp", "nor_addr_8_9_grp", "nor_addr_10_11_grp",
-	"nor_addr_12_15_grp"
-
-"gpio": "gpio_0_1_grp", "gpio_2_5_grp", "gpio_6_7_grp", "gpio_8_9_grp",
-	"gpio_10_11_grp", "gpio_12_13_grp", "gpio_14_17_grp", "gpio_18_19_grp",
-	"gpio_20_21_grp", "gpio_22_23_grp", "gpio_24_25_grp", "gpio_26_27_grp",
-	"gpio_28_29_grp", "gpio_30_31_grp"
-
-"pcie": "pcie_ab1_clk_wak_grp", "pcie_a3_clk_wak_grp", "pcie_b3_clk_wak_grp",
-	"pcie_b2_clk_wak_grp", "pcie_a2_clk_wak_grp"
-
-"uart0": "uart0_modem_grp", "uart0_rts_cts_grp", "uart0_in_out_grp"
-
-"uart1": "uart1_ext_clk_grp", "uart1_dcd_dsr_grp", "uart1_ri_dtr_grp",
-	"uart1_rts_cts_grp", "uart1_in_out_grp"
-
-"uart2": "uart2_rts_cts_grp"
-
-"pwm": "pwm_0_grp", "pwm_1_grp", "pwm_2_grp", "pwm_3_grp"
-
-
-List of pins that support pinconf parameters:
-
-"qspi_wp", "qspi_hold", "qspi_cs", "qspi_sck", "uart3_sin", "uart3_sout",
-"qspi_mosi", "qspi_miso", "spi0_fss", "spi0_rxd", "spi0_txd", "spi0_sck",
-"spi1_fss", "spi1_rxd", "spi1_txd", "spi1_sck", "sdio0_data7",
-"sdio0_emmc_rst", "sdio0_led_on", "sdio0_wp", "sdio0_data3", "sdio0_data4",
-"sdio0_data5", "sdio0_data6", "sdio0_cmd", "sdio0_data0", "sdio0_data1",
-"sdio0_data2", "sdio1_led_on", "sdio1_wp", "sdio0_cd_l", "sdio0_clk",
-"sdio1_data5", "sdio1_data6", "sdio1_data7", "sdio1_emmc_rst", "sdio1_data1",
-"sdio1_data2", "sdio1_data3", "sdio1_data4", "sdio1_cd_l", "sdio1_clk",
-"sdio1_cmd", "sdio1_data0", "ext_mdio_0", "ext_mdc_0", "usb3_p1_vbus_ppc",
-"usb3_p1_overcurrent", "usb3_p0_vbus_ppc", "usb3_p0_overcurrent",
-"usb2_presence_indication", "usb2_vbus_present", "usb2_vbus_ppc",
-"usb2_overcurrent", "sata_led1", "sata_led0"