diff options
Diffstat (limited to 'Documentation/driver-api/cxl/linux/example-configurations/single-device.rst')
| -rw-r--r-- | Documentation/driver-api/cxl/linux/example-configurations/single-device.rst | 246 |
1 files changed, 246 insertions, 0 deletions
diff --git a/Documentation/driver-api/cxl/linux/example-configurations/single-device.rst b/Documentation/driver-api/cxl/linux/example-configurations/single-device.rst new file mode 100644 index 000000000000..5fd38eb0aaf4 --- /dev/null +++ b/Documentation/driver-api/cxl/linux/example-configurations/single-device.rst @@ -0,0 +1,246 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============= +Single Device +============= +This cxl-cli configuration dump shows the following host configuration: + +* A single socket system with one CXL root +* CXL Root has Four (4) CXL Host Bridges +* One CXL Host Bridges has a single CXL Memory Expander Attached +* No interleave is present. + +This output is generated by :code:`cxl list -v` and describes the relationships +between objects exposed in :code:`/sys/bus/cxl/devices/`. + +:: + + [ + { + "bus":"root0", + "provider":"ACPI.CXL", + "nr_dports":4, + "dports":[ + { + "dport":"pci0000:00", + "alias":"ACPI0016:01", + "id":0 + }, + { + "dport":"pci0000:a8", + "alias":"ACPI0016:02", + "id":4 + }, + { + "dport":"pci0000:2a", + "alias":"ACPI0016:03", + "id":1 + }, + { + "dport":"pci0000:d2", + "alias":"ACPI0016:00", + "id":5 + } + ], + +This chunk shows the CXL "bus" (root0) has 4 downstream ports attached to CXL +Host Bridges. The `Root` can be considered the singular upstream port attached +to the platform's memory controller - which routes memory requests to it. + +The `ports:root0` section lays out how each of these downstream ports are +configured. If a port is not configured (id's 0, 1, and 4), they are omitted. + +:: + + "ports:root0":[ + { + "port":"port1", + "host":"pci0000:d2", + "depth":1, + "nr_dports":3, + "dports":[ + { + "dport":"0000:d2:01.1", + "alias":"device:02", + "id":0 + }, + { + "dport":"0000:d2:01.3", + "alias":"device:05", + "id":2 + }, + { + "dport":"0000:d2:07.1", + "alias":"device:0d", + "id":113 + } + ], + +This chunk shows the available downstream ports associated with the CXL Host +Bridge :code:`port1`. In this case, :code:`port1` has 3 available downstream +ports: :code:`dport1`, :code:`dport2`, and :code:`dport113`.. + +:: + + "endpoints:port1":[ + { + "endpoint":"endpoint5", + "host":"mem0", + "parent_dport":"0000:d2:01.1", + "depth":2, + "memdev":{ + "memdev":"mem0", + "ram_size":137438953472, + "serial":0, + "numa_node":0, + "host":"0000:d3:00.0" + }, + "decoders:endpoint5":[ + { + "decoder":"decoder5.0", + "resource":825975898112, + "size":137438953472, + "interleave_ways":1, + "region":"region0", + "dpa_resource":0, + "dpa_size":137438953472, + "mode":"ram" + } + ] + } + ], + +This chunk shows the endpoints attached to the host bridge :code:`port1`. + +:code:`endpoint5` contains a single configured decoder :code:`decoder5.0` +which has the same interleave configuration as :code:`region0` (shown later). + +Next we have the decoders belonging to the host bridge: + +:: + + "decoders:port1":[ + { + "decoder":"decoder1.0", + "resource":825975898112, + "size":137438953472, + "interleave_ways":1, + "region":"region0", + "nr_targets":1, + "targets":[ + { + "target":"0000:d2:01.1", + "alias":"device:02", + "position":0, + "id":0 + } + ] + } + ] + }, + +Host Bridge :code:`port1` has a single decoder (:code:`decoder1.0`), whose only +target is :code:`dport1` - which is attached to :code:`endpoint5`. + +The next chunk shows the three CXL host bridges without attached endpoints. + +:: + + { + "port":"port2", + "host":"pci0000:00", + "depth":1, + "nr_dports":2, + "dports":[ + { + "dport":"0000:00:01.3", + "alias":"device:55", + "id":2 + }, + { + "dport":"0000:00:07.1", + "alias":"device:5d", + "id":113 + } + ] + }, + { + "port":"port3", + "host":"pci0000:a8", + "depth":1, + "nr_dports":1, + "dports":[ + { + "dport":"0000:a8:01.1", + "alias":"device:c3", + "id":0 + } + ] + }, + { + "port":"port4", + "host":"pci0000:2a", + "depth":1, + "nr_dports":1, + "dports":[ + { + "dport":"0000:2a:01.1", + "alias":"device:d0", + "id":0 + } + ] + } + ], + +Next we have the `Root Decoders` belonging to :code:`root0`. This root decoder +is a pass-through decoder because :code:`interleave_ways` is set to :code:`1`. + +This information is generated by the CXL driver reading the ACPI CEDT CMFWS. + +:: + + "decoders:root0":[ + { + "decoder":"decoder0.0", + "resource":825975898112, + "size":137438953472, + "interleave_ways":1, + "max_available_extent":0, + "volatile_capable":true, + "nr_targets":1, + "targets":[ + { + "target":"pci0000:d2", + "alias":"ACPI0016:00", + "position":0, + "id":5 + } + ], + +Finally we have the `Memory Region` associated with the `Root Decoder` +:code:`decoder0.0`. This region describes the discrete region associated +with the lone device. + +:: + + "regions:decoder0.0":[ + { + "region":"region0", + "resource":825975898112, + "size":137438953472, + "type":"ram", + "interleave_ways":1, + "decode_state":"commit", + "mappings":[ + { + "position":0, + "memdev":"mem0", + "decoder":"decoder5.0" + } + ] + } + ] + } + ] + } + ] |