diff options
Diffstat (limited to 'Documentation/userspace-api/media')
3 files changed, 215 insertions, 0 deletions
diff --git a/Documentation/userspace-api/media/v4l/meta-formats.rst b/Documentation/userspace-api/media/v4l/meta-formats.rst index 86ffb3bc8ade..bb6876cfc271 100644 --- a/Documentation/userspace-api/media/v4l/meta-formats.rst +++ b/Documentation/userspace-api/media/v4l/meta-formats.rst @@ -12,6 +12,7 @@ These formats are used for the :ref:`metadata` interface only. .. toctree:: :maxdepth: 1 + metafmt-c3-isp metafmt-d4xx metafmt-generic metafmt-intel-ipu3 diff --git a/Documentation/userspace-api/media/v4l/metafmt-c3-isp.rst b/Documentation/userspace-api/media/v4l/metafmt-c3-isp.rst new file mode 100644 index 000000000000..449b45c2ec24 --- /dev/null +++ b/Documentation/userspace-api/media/v4l/metafmt-c3-isp.rst @@ -0,0 +1,86 @@ +.. SPDX-License-Identifier: (GPL-2.0-only OR MIT) + +.. _v4l2-meta-fmt-c3isp-stats: +.. _v4l2-meta-fmt-c3isp-params: + +*********************************************************************** +V4L2_META_FMT_C3ISP_STATS ('C3ST'), V4L2_META_FMT_C3ISP_PARAMS ('C3PM') +*********************************************************************** + +.. c3_isp_stats_info + +3A Statistics +============= + +The C3 ISP can collect different statistics over an input Bayer frame. +Those statistics are obtained from the "c3-isp-stats" metadata capture video nodes, +using the :c:type:`v4l2_meta_format` interface. +They are formatted as described by the :c:type:`c3_isp_stats_info` structure. + +The statistics collected are Auto-white balance, +Auto-exposure and Auto-focus information. + +.. c3_isp_params_cfg + +Configuration Parameters +======================== + +The configuration parameters are passed to the c3-isp-params metadata output video node, +using the :c:type:`v4l2_meta_format` interface. Rather than a single struct containing +sub-structs for each configurable area of the ISP, parameters for the C3-ISP +are defined as distinct structs or "blocks" which may be added to the data +member of :c:type:`c3_isp_params_cfg`. Userspace is responsible for +populating the data member with the blocks that need to be configured by the driver, but +need not populate it with **all** the blocks, or indeed with any at all if there +are no configuration changes to make. Populated blocks **must** be consecutive +in the buffer. To assist both userspace and the driver in identifying the +blocks each block-specific struct embeds +:c:type:`c3_isp_params_block_header` as its first member and userspace +must populate the type member with a value from +:c:type:`c3_isp_params_block_type`. Once the blocks have been populated +into the data buffer, the combined size of all populated blocks shall be set in +the data_size member of :c:type:`c3_isp_params_cfg`. For example: + +.. code-block:: c + + struct c3_isp_params_cfg *params = + (struct c3_isp_params_cfg *)buffer; + + params->version = C3_ISP_PARAM_BUFFER_V0; + params->data_size = 0; + + void *data = (void *)params->data; + + struct c3_isp_params_awb_gains *gains = + (struct c3_isp_params_awb_gains *)data; + + gains->header.type = C3_ISP_PARAMS_BLOCK_AWB_GAINS; + gains->header.flags = C3_ISP_PARAMS_BLOCK_FL_ENABLE; + gains->header.size = sizeof(struct c3_isp_params_awb_gains); + + gains->gr_gain = 256; + gains->r_gain = 256; + gains->b_gain = 256; + gains->gb_gain = 256; + + data += sizeof(struct c3_isp__params_awb_gains); + params->data_size += sizeof(struct c3_isp_params_awb_gains); + + struct c3_isp_params_awb_config *awb_cfg = + (struct c3_isp_params_awb_config *)data; + + awb_cfg->header.type = C3_ISP_PARAMS_BLOCK_AWB_CONFIG; + awb_cfg->header.flags = C3_ISP_PARAMS_BLOCK_FL_ENABLE; + awb_cfg->header.size = sizeof(struct c3_isp_params_awb_config); + + awb_cfg->tap_point = C3_ISP_AWB_STATS_TAP_BEFORE_WB; + awb_cfg->satur = 1; + awb_cfg->horiz_zones_num = 32; + awb_cfg->vert_zones_num = 24; + + params->data_size += sizeof(struct c3_isp_params_awb_config); + +Amlogic C3 ISP uAPI data types +=============================== + +.. kernel-doc:: include/uapi/linux/media/amlogic/c3-isp-config.h diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst index b788f6933855..6e4f399f1f88 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst @@ -137,6 +137,13 @@ All components are stored with the same number of bits per component. - Cb, Cr - No - Linear + * - V4L2_PIX_FMT_NV15 + - 'NV15' + - 10 + - 4:2:0 + - Cb, Cr + - Yes + - Linear * - V4L2_PIX_FMT_NV15_4L4 - 'VT15' - 15 @@ -186,6 +193,13 @@ All components are stored with the same number of bits per component. - Cr, Cb - No - Linear + * - V4L2_PIX_FMT_NV20 + - 'NV20' + - 10 + - 4:2:2 + - Cb, Cr + - Yes + - Linear * - V4L2_PIX_FMT_NV24 - 'NV24' - 8 @@ -302,6 +316,57 @@ of the luma plane. - Cr\ :sub:`11` +.. _V4L2-PIX-FMT-NV15: + +NV15 +---- + +Semi-planar 10-bit YUV 4:2:0 format similar to NV12, using 10-bit components +with no padding between each component. A group of 4 components are stored over +5 bytes in little endian order. + +.. flat-table:: Sample 4x4 NV15 Image (1 byte per cell) + :header-rows: 0 + :stub-columns: 0 + + * - start + 0: + - Y'\ :sub:`00[7:0]` + - Y'\ :sub:`01[5:0]`\ Y'\ :sub:`00[9:8]` + - Y'\ :sub:`02[3:0]`\ Y'\ :sub:`01[9:6]` + - Y'\ :sub:`03[1:0]`\ Y'\ :sub:`02[9:4]` + - Y'\ :sub:`03[9:2]` + * - start + 5: + - Y'\ :sub:`10[7:0]` + - Y'\ :sub:`11[5:0]`\ Y'\ :sub:`10[9:8]` + - Y'\ :sub:`12[3:0]`\ Y'\ :sub:`11[9:6]` + - Y'\ :sub:`13[1:0]`\ Y'\ :sub:`12[9:4]` + - Y'\ :sub:`13[9:2]` + * - start + 10: + - Y'\ :sub:`20[7:0]` + - Y'\ :sub:`21[5:0]`\ Y'\ :sub:`20[9:8]` + - Y'\ :sub:`22[3:0]`\ Y'\ :sub:`21[9:6]` + - Y'\ :sub:`23[1:0]`\ Y'\ :sub:`22[9:4]` + - Y'\ :sub:`23[9:2]` + * - start + 15: + - Y'\ :sub:`30[7:0]` + - Y'\ :sub:`31[5:0]`\ Y'\ :sub:`30[9:8]` + - Y'\ :sub:`32[3:0]`\ Y'\ :sub:`31[9:6]` + - Y'\ :sub:`33[1:0]`\ Y'\ :sub:`32[9:4]` + - Y'\ :sub:`33[9:2]` + * - start + 20: + - Cb\ :sub:`00[7:0]` + - Cr\ :sub:`00[5:0]`\ Cb\ :sub:`00[9:8]` + - Cb\ :sub:`01[3:0]`\ Cr\ :sub:`00[9:6]` + - Cr\ :sub:`01[1:0]`\ Cb\ :sub:`01[9:4]` + - Cr\ :sub:`01[9:2]` + * - start + 25: + - Cb\ :sub:`10[7:0]` + - Cr\ :sub:`10[5:0]`\ Cb\ :sub:`10[9:8]` + - Cb\ :sub:`11[3:0]`\ Cr\ :sub:`10[9:6]` + - Cr\ :sub:`11[1:0]`\ Cb\ :sub:`11[9:4]` + - Cr\ :sub:`11[9:2]` + + .. _V4L2-PIX-FMT-NV12MT: .. _V4L2-PIX-FMT-NV12MT-16X16: .. _V4L2-PIX-FMT-NV12-4L4: @@ -631,6 +696,69 @@ number of lines as the luma plane. - Cr\ :sub:`32` +.. _V4L2-PIX-FMT-NV20: + +NV20 +---- + +Semi-planar 10-bit YUV 4:2:2 format similar to NV16, using 10-bit components +with no padding between each component. A group of 4 components are stored over +5 bytes in little endian order. + +.. flat-table:: Sample 4x4 NV20 Image (1 byte per cell) + :header-rows: 0 + :stub-columns: 0 + + * - start + 0: + - Y'\ :sub:`00[7:0]` + - Y'\ :sub:`01[5:0]`\ Y'\ :sub:`00[9:8]` + - Y'\ :sub:`02[3:0]`\ Y'\ :sub:`01[9:6]` + - Y'\ :sub:`03[1:0]`\ Y'\ :sub:`02[9:4]` + - Y'\ :sub:`03[9:2]` + * - start + 5: + - Y'\ :sub:`10[7:0]` + - Y'\ :sub:`11[5:0]`\ Y'\ :sub:`10[9:8]` + - Y'\ :sub:`12[3:0]`\ Y'\ :sub:`11[9:6]` + - Y'\ :sub:`13[1:0]`\ Y'\ :sub:`12[9:4]` + - Y'\ :sub:`13[9:2]` + * - start + 10: + - Y'\ :sub:`20[7:0]` + - Y'\ :sub:`21[5:0]`\ Y'\ :sub:`20[9:8]` + - Y'\ :sub:`22[3:0]`\ Y'\ :sub:`21[9:6]` + - Y'\ :sub:`23[1:0]`\ Y'\ :sub:`22[9:4]` + - Y'\ :sub:`23[9:2]` + * - start + 15: + - Y'\ :sub:`30[7:0]` + - Y'\ :sub:`31[5:0]`\ Y'\ :sub:`30[9:8]` + - Y'\ :sub:`32[3:0]`\ Y'\ :sub:`31[9:6]` + - Y'\ :sub:`33[1:0]`\ Y'\ :sub:`32[9:4]` + - Y'\ :sub:`33[9:2]` + * - start + 20: + - Cb\ :sub:`00[7:0]` + - Cr\ :sub:`00[5:0]`\ Cb\ :sub:`00[9:8]` + - Cb\ :sub:`01[3:0]`\ Cr\ :sub:`00[9:6]` + - Cr\ :sub:`01[1:0]`\ Cb\ :sub:`01[9:4]` + - Cr\ :sub:`01[9:2]` + * - start + 25: + - Cb\ :sub:`10[7:0]` + - Cr\ :sub:`10[5:0]`\ Cb\ :sub:`10[9:8]` + - Cb\ :sub:`11[3:0]`\ Cr\ :sub:`10[9:6]` + - Cr\ :sub:`11[1:0]`\ Cb\ :sub:`11[9:4]` + - Cr\ :sub:`11[9:2]` + * - start + 30: + - Cb\ :sub:`20[7:0]` + - Cr\ :sub:`20[5:0]`\ Cb\ :sub:`20[9:8]` + - Cb\ :sub:`21[3:0]`\ Cr\ :sub:`20[9:6]` + - Cr\ :sub:`21[1:0]`\ Cb\ :sub:`21[9:4]` + - Cr\ :sub:`21[9:2]` + * - start + 35: + - Cb\ :sub:`30[7:0]` + - Cr\ :sub:`30[5:0]`\ Cb\ :sub:`30[9:8]` + - Cb\ :sub:`31[3:0]`\ Cr\ :sub:`30[9:6]` + - Cr\ :sub:`31[1:0]`\ Cb\ :sub:`31[9:4]` + - Cr\ :sub:`31[9:2]` + + .. _V4L2-PIX-FMT-NV24: .. _V4L2-PIX-FMT-NV42: |