diff options
Diffstat (limited to 'Documentation')
55 files changed, 1694 insertions, 647 deletions
diff --git a/Documentation/ABI/testing/configfs-tsm b/Documentation/ABI/testing/configfs-tsm-report index 534408bc1408..534408bc1408 100644 --- a/Documentation/ABI/testing/configfs-tsm +++ b/Documentation/ABI/testing/configfs-tsm-report diff --git a/Documentation/ABI/testing/sysfs-devices-virtual-misc-tdx_guest b/Documentation/ABI/testing/sysfs-devices-virtual-misc-tdx_guest new file mode 100644 index 000000000000..8fca56c8c9df --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-virtual-misc-tdx_guest @@ -0,0 +1,63 @@ +What: /sys/devices/virtual/misc/tdx_guest/measurements/MRNAME[:HASH] +Date: April, 2025 +KernelVersion: v6.16 +Contact: linux-coco@lists.linux.dev +Description: + Value of a TDX measurement register (MR). MRNAME and HASH above + are placeholders. The optional suffix :HASH is used for MRs + that have associated hash algorithms. See below for a complete + list of TDX MRs exposed via sysfs. Refer to Intel TDX Module + ABI Specification for the definition of TDREPORT and the full + list of TDX measurements. + + Intel TDX Module ABI Specification can be found at: + https://www.intel.com/content/www/us/en/developer/tools/trust-domain-extensions/documentation.html#architecture + + See also: + https://docs.kernel.org/driver-api/coco/measurement-registers.html + +What: /sys/devices/virtual/misc/tdx_guest/measurements/mrconfigid +Date: April, 2025 +KernelVersion: v6.16 +Contact: linux-coco@lists.linux.dev +Description: + (RO) MRCONFIGID - 48-byte immutable storage typically used for + software-defined ID for non-owner-defined configuration of the + guest TD – e.g., run-time or OS configuration. + +What: /sys/devices/virtual/misc/tdx_guest/measurements/mrowner +Date: April, 2025 +KernelVersion: v6.16 +Contact: linux-coco@lists.linux.dev +Description: + (RO) MROWNER - 48-byte immutable storage typically used for + software-defined ID for the guest TD’s owner. + +What: /sys/devices/virtual/misc/tdx_guest/measurements/mrownerconfig +Date: April, 2025 +KernelVersion: v6.16 +Contact: linux-coco@lists.linux.dev +Description: + (RO) MROWNERCONFIG - 48-byte immutable storage typically used + for software-defined ID for owner-defined configuration of the + guest TD – e.g., specific to the workload rather than the + run-time or OS. + +What: /sys/devices/virtual/misc/tdx_guest/measurements/mrtd:sha384 +Date: April, 2025 +KernelVersion: v6.16 +Contact: linux-coco@lists.linux.dev +Description: + (RO) MRTD - Measurement of the initial contents of the TD. + +What: /sys/devices/virtual/misc/tdx_guest/measurements/rtmr[0123]:sha384 +Date: April, 2025 +KernelVersion: v6.16 +Contact: linux-coco@lists.linux.dev +Description: + (RW) RTMR[0123] - 4 Run-Time extendable Measurement Registers. + Read from any of these returns the current value of the + corresponding RTMR. Write extends the written buffer to the + RTMR. All writes must start at offset 0 and be 48 bytes in + size. Partial writes will result in EINVAL returned by the + write() syscall. diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index e36d2de16cbd..d4140dc6c5ba 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -1636,3 +1636,52 @@ Description: attribute value. The attribute is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/wb_resize_enable +What: /sys/bus/platform/devices/*.ufs/wb_resize_enable +Date: April 2025 +Contact: Huan Tang <tanghuan@vivo.com> +Description: + The host can enable the WriteBooster buffer resize by setting this + attribute. + + ======== ====================================== + idle There is no resize operation + decrease Decrease WriteBooster buffer size + increase Increase WriteBooster buffer size + ======== ====================================== + + The file is write only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_resize_hint +What: /sys/bus/platform/devices/*.ufs/attributes/wb_resize_hint +Date: April 2025 +Contact: Huan Tang <tanghuan@vivo.com> +Description: + wb_resize_hint indicates hint information about which type of resize + for WriteBooster buffer is recommended by the device. + + ========= ====================================== + keep Recommend keep the buffer size + decrease Recommend to decrease the buffer size + increase Recommend to increase the buffer size + ========= ====================================== + + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_resize_status +What: /sys/bus/platform/devices/*.ufs/attributes/wb_resize_status +Date: April 2025 +Contact: Huan Tang <tanghuan@vivo.com> +Description: + The host can check the resize operation status of the WriteBooster + buffer by reading this attribute. + + ================ ======================================== + idle Resize operation is not issued + in_progress Resize operation in progress + complete_success Resize operation completed successfully + general_failure Resize operation general failure + ================ ======================================== + + The file is read only. diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 59adb7dc6f9e..bf03263b9f46 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -270,7 +270,7 @@ Description: Shows all enabled kernel features. inode_checksum, flexible_inline_xattr, quota_ino, inode_crtime, lost_found, verity, sb_checksum, casefold, readonly, compression, test_dummy_encryption_v2, - atomic_write, pin_file, encrypted_casefold. + atomic_write, pin_file, encrypted_casefold, linear_lookup. What: /sys/fs/f2fs/<disk>/inject_rate Date: May 2016 @@ -710,32 +710,34 @@ Description: Support configuring fault injection type, should be enabled with fault_injection option, fault type value is shown below, it supports single or combined type. - =========================== =========== + =========================== ========== Type_Name Type_Value - =========================== =========== - FAULT_KMALLOC 0x000000001 - FAULT_KVMALLOC 0x000000002 - FAULT_PAGE_ALLOC 0x000000004 - FAULT_PAGE_GET 0x000000008 - FAULT_ALLOC_BIO 0x000000010 (obsolete) - FAULT_ALLOC_NID 0x000000020 - FAULT_ORPHAN 0x000000040 - FAULT_BLOCK 0x000000080 - FAULT_DIR_DEPTH 0x000000100 - FAULT_EVICT_INODE 0x000000200 - FAULT_TRUNCATE 0x000000400 - FAULT_READ_IO 0x000000800 - FAULT_CHECKPOINT 0x000001000 - FAULT_DISCARD 0x000002000 - FAULT_WRITE_IO 0x000004000 - FAULT_SLAB_ALLOC 0x000008000 - FAULT_DQUOT_INIT 0x000010000 - FAULT_LOCK_OP 0x000020000 - FAULT_BLKADDR_VALIDITY 0x000040000 - FAULT_BLKADDR_CONSISTENCE 0x000080000 - FAULT_NO_SEGMENT 0x000100000 - FAULT_INCONSISTENT_FOOTER 0x000200000 - =========================== =========== + =========================== ========== + FAULT_KMALLOC 0x00000001 + FAULT_KVMALLOC 0x00000002 + FAULT_PAGE_ALLOC 0x00000004 + FAULT_PAGE_GET 0x00000008 + FAULT_ALLOC_BIO 0x00000010 (obsolete) + FAULT_ALLOC_NID 0x00000020 + FAULT_ORPHAN 0x00000040 + FAULT_BLOCK 0x00000080 + FAULT_DIR_DEPTH 0x00000100 + FAULT_EVICT_INODE 0x00000200 + FAULT_TRUNCATE 0x00000400 + FAULT_READ_IO 0x00000800 + FAULT_CHECKPOINT 0x00001000 + FAULT_DISCARD 0x00002000 + FAULT_WRITE_IO 0x00004000 + FAULT_SLAB_ALLOC 0x00008000 + FAULT_DQUOT_INIT 0x00010000 + FAULT_LOCK_OP 0x00020000 + FAULT_BLKADDR_VALIDITY 0x00040000 + FAULT_BLKADDR_CONSISTENCE 0x00080000 + FAULT_NO_SEGMENT 0x00100000 + FAULT_INCONSISTENT_FOOTER 0x00200000 + FAULT_TIMEOUT 0x00400000 (1000ms) + FAULT_VMALLOC 0x00800000 + =========================== ========== What: /sys/fs/f2fs/<disk>/discard_io_aware_gran Date: January 2023 @@ -846,3 +848,16 @@ Description: For several zoned storage devices, vendors will provide extra space reserved_blocks. However, it is not enough, since this extra space should not be shown to users. So, with this new sysfs node, we can hide the space by substracting reserved_blocks from total bytes. + +What: /sys/fs/f2fs/<disk>/encoding_flags +Date: April 2025 +Contact: "Chao Yu" <chao@kernel.org> +Description: This is a read-only entry to show the value of sb.s_encoding_flags, the + value is hexadecimal. + + ============================ ========== + Flag_Name Flag_Value + ============================ ========== + SB_ENC_STRICT_MODE_FL 0x00000001 + SB_ENC_NO_COMPAT_FALLBACK_FL 0x00000002 + ============================ ========== diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml index 70369bd633e4..7fcd55d468d4 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml @@ -25,6 +25,7 @@ properties: - const: allwinner,sun50i-a64-de2-clk - const: allwinner,sun50i-h5-de2-clk - const: allwinner,sun50i-h6-de3-clk + - const: allwinner,sun50i-h616-de33-clk - items: - const: allwinner,sun8i-r40-de2-clk - const: allwinner,sun8i-h3-de2-clk diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt deleted file mode 100644 index 4acfc8f641b6..000000000000 --- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt +++ /dev/null @@ -1,31 +0,0 @@ -Broadcom BCM2835 auxiliary peripheral support - -This binding uses the common clock binding: - Documentation/devicetree/bindings/clock/clock-bindings.txt - -The auxiliary peripherals (UART, SPI1, and SPI2) have a small register -area controlling clock gating to the peripherals, and providing an IRQ -status register. - -Required properties: -- compatible: Should be "brcm,bcm2835-aux" -- #clock-cells: Should be <1>. The permitted clock-specifier values can be - found in include/dt-bindings/clock/bcm2835-aux.h -- reg: Specifies base physical address and size of the registers -- clocks: The parent clock phandle - -Example: - - clocks: cprman@7e101000 { - compatible = "brcm,bcm2835-cprman"; - #clock-cells = <1>; - reg = <0x7e101000 0x2000>; - clocks = <&clk_osc>; - }; - - aux: aux@7e215004 { - compatible = "brcm,bcm2835-aux"; - #clock-cells = <1>; - reg = <0x7e215000 0x8>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - }; diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.yaml new file mode 100644 index 000000000000..0f4050ffa41c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/brcm,bcm2835-aux-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2835 auxiliary peripheral clock + +maintainers: + - Stefan Wahren <wahrenst@gmx.net> + - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com> + +description: + The auxiliary peripherals (UART, SPI1, and SPI2) have a small register + area controlling clock gating to the peripherals, and providing an IRQ + status register. + +properties: + compatible: + const: brcm,bcm2835-aux + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - "#clock-cells" + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + clock@7e215000 { + compatible = "brcm,bcm2835-aux"; + reg = <0x7e215000 0x8>; + #clock-cells = <1>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + }; diff --git a/Documentation/devicetree/bindings/clock/fsl,vf610-ccm.yaml b/Documentation/devicetree/bindings/clock/fsl,vf610-ccm.yaml new file mode 100644 index 000000000000..29ae5be51acf --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fsl,vf610-ccm.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,vf610-ccm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock for Freescale Vybrid VF610 SOC + +description: + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h + for the full list of VF610 clock IDs + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: fsl,vf610-ccm + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: external crystal oscillator 32KHz, recommended + - description: external crystal oscillator 24MHz, recommended + - description: audio + - description: enet + minItems: 2 + + clock-names: + items: + - const: sxosc + - const: fxosc + - const: enet_ext + - const: audio_ext + minItems: 2 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + clock-controller@4006b000 { + compatible = "fsl,vf610-ccm"; + reg = <0x4006b000 0x1000>; + #clock-cells = <1>; + clocks = <&sxosc>, <&fxosc>; + clock-names = "sxosc", "fxosc"; + }; + diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt deleted file mode 100644 index c10849efb444..000000000000 --- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt +++ /dev/null @@ -1,114 +0,0 @@ -Binding for Maxim MAX77686/MAX77802/MAX77620 32k clock generator block - -This is a part of device tree bindings of MAX77686/MAX77802/MAX77620 -multi-function device. More information can be found in MFD DT binding -doc as follows: - bindings/mfd/max77686.txt for MAX77686 and - bindings/mfd/max77802.txt for MAX77802 and - bindings/mfd/max77620.txt for MAX77620. - -The MAX77686 contains three 32.768khz clock outputs that can be controlled -(gated/ungated) over I2C. Clocks are defined as preprocessor macros in -dt-bindings/clock/maxim,max77686.h. - - -The MAX77802 contains two 32.768khz clock outputs that can be controlled -(gated/ungated) over I2C. Clocks are defined as preprocessor macros in -dt-bindings/clock/maxim,max77802.h. - -The MAX77686 contains one 32.768khz clock outputs that can be controlled -(gated/ungated) over I2C. Clocks are defined as preprocessor macros in -dt-bindings/clock/maxim,max77620.h. - -Following properties should be presend in main device node of the MFD chip. - -Required properties: - -- #clock-cells: from common clock binding; shall be set to 1. - -Optional properties: -- clock-output-names: From common clock binding. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. Following indices are allowed: - - 0: 32khz_ap clock (max77686, max77802), 32khz_out0 (max77620) - - 1: 32khz_cp clock (max77686, max77802), - - 2: 32khz_pmic clock (max77686). - -Clocks are defined as preprocessor macros in above dt-binding header for -respective chips. - -Example: - -1. With MAX77686: - -#include <dt-bindings/clock/maxim,max77686.h> -/* ... */ - - Node of the MFD chip - max77686: max77686@9 { - compatible = "maxim,max77686"; - interrupt-parent = <&wakeup_eint>; - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - reg = <0x09>; - #clock-cells = <1>; - - /* ... */ - }; - - Clock consumer node - - foo@0 { - compatible = "bar,foo"; - /* ... */ - clock-names = "my-clock"; - clocks = <&max77686 MAX77686_CLK_PMIC>; - }; - -2. With MAX77802: - -#include <dt-bindings/clock/maxim,max77802.h> -/* ... */ - - Node of the MFD chip - max77802: max77802@9 { - compatible = "maxim,max77802"; - interrupt-parent = <&wakeup_eint>; - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - reg = <0x09>; - #clock-cells = <1>; - - /* ... */ - }; - - Clock consumer node - - foo@0 { - compatible = "bar,foo"; - /* ... */ - clock-names = "my-clock"; - clocks = <&max77802 MAX77802_CLK_32K_AP>; - }; - - -3. With MAX77620: - -#include <dt-bindings/clock/maxim,max77620.h> -/* ... */ - - Node of the MFD chip - max77620: max77620@3c { - compatible = "maxim,max77620"; - reg = <0x3c>; - #clock-cells = <1>; - /* ... */ - }; - - Clock consumer node - - foo@0 { - compatible = "bar,foo"; - /* ... */ - clock-names = "my-clock"; - clocks = <&max77620 MAX77620_CLK_32K_OUT0>; - }; diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml index 340c7e5cf980..5f7738d6835c 100644 --- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml @@ -14,6 +14,7 @@ description: | domains on Qualcomm SoCs. See also:: + include/dt-bindings/clock/qcom,sm6350-videocc.h include/dt-bindings/clock/qcom,videocc-sc7180.h include/dt-bindings/clock/qcom,videocc-sc7280.h include/dt-bindings/clock/qcom,videocc-sdm845.h @@ -26,6 +27,7 @@ properties: - qcom,sc7180-videocc - qcom,sc7280-videocc - qcom,sdm845-videocc + - qcom,sm6350-videocc - qcom,sm8150-videocc - qcom,sm8250-videocc @@ -91,6 +93,24 @@ allOf: properties: compatible: enum: + - qcom,sm6350-videocc + then: + properties: + clocks: + items: + - description: Video AHB clock from GCC + - description: Board XO source + - description: Sleep Clock source + clock-names: + items: + - const: iface + - const: bi_tcxo + - const: sleep_clk + + - if: + properties: + compatible: + enum: - qcom,sm8150-videocc then: properties: diff --git a/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml index c3fe76abd549..f261445bf341 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml @@ -4,13 +4,13 @@ $id: http://devicetree.org/schemas/clock/renesas,rzv2h-cpg.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Renesas RZ/{G3E,V2H(P)} Clock Pulse Generator (CPG) +title: Renesas RZ/{G3E,V2H(P),V2N} Clock Pulse Generator (CPG) maintainers: - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> description: - On Renesas RZ/{G3E,V2H(P)} SoCs, the CPG (Clock Pulse Generator) handles + On Renesas RZ/{G3E,V2H(P),V2N} SoCs, the CPG (Clock Pulse Generator) handles generation and control of clock signals for the IP modules, generation and control of resets, and control over booting, low power consumption and power supply domains. @@ -19,6 +19,7 @@ properties: compatible: enum: - renesas,r9a09g047-cpg # RZ/G3E + - renesas,r9a09g056-cpg # RZ/V2N - renesas,r9a09g057-cpg # RZ/V2H reg: diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml index 3330b2727474..6961a68098f4 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml @@ -8,6 +8,7 @@ title: Samsung ExynosAuto v920 SoC clock controller maintainers: - Sunyeal Hong <sunyeal.hong@samsung.com> + - Shin Son <shin.son@samsung.com> - Chanwoo Choi <cw00.choi@samsung.com> - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> @@ -32,6 +33,9 @@ properties: compatible: enum: - samsung,exynosautov920-cmu-top + - samsung,exynosautov920-cmu-cpucl0 + - samsung,exynosautov920-cmu-cpucl1 + - samsung,exynosautov920-cmu-cpucl2 - samsung,exynosautov920-cmu-peric0 - samsung,exynosautov920-cmu-peric1 - samsung,exynosautov920-cmu-misc @@ -74,6 +78,71 @@ allOf: compatible: contains: enum: + - samsung,exynosautov920-cmu-cpucl0 + + then: + properties: + clocks: + items: + - description: External reference clock (38.4 MHz) + - description: CMU_CPUCL0 SWITCH clock (from CMU_TOP) + - description: CMU_CPUCL0 CLUSTER clock (from CMU_TOP) + - description: CMU_CPUCL0 DBG clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: switch + - const: cluster + - const: dbg + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynosautov920-cmu-cpucl1 + + then: + properties: + clocks: + items: + - description: External reference clock (38.4 MHz) + - description: CMU_CPUCL1 SWITCH clock (from CMU_TOP) + - description: CMU_CPUCL1 CLUSTER clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: switch + - const: cluster + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynosautov920-cmu-cpucl2 + + then: + properties: + clocks: + items: + - description: External reference clock (38.4 MHz) + - description: CMU_CPUCL2 SWITCH clock (from CMU_TOP) + - description: CMU_CPUCL2 CLUSTER clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: switch + - const: cluster + + - if: + properties: + compatible: + contains: + enum: - samsung,exynosautov920-cmu-peric0 - samsung,exynosautov920-cmu-peric1 diff --git a/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml b/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml index 59ef41adb539..379ce3e9e391 100644 --- a/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml +++ b/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml @@ -11,10 +11,18 @@ maintainers: properties: compatible: - enum: - - sophgo,cv1800-clk - - sophgo,cv1810-clk - - sophgo,sg2000-clk + oneOf: + - enum: + - sophgo,cv1800b-clk + - sophgo,cv1812h-clk + - sophgo,sg2000-clk + - items: + - const: sophgo,sg2002-clk + - const: sophgo,sg2000-clk + - const: sophgo,cv1800-clk + deprecated: true + - const: sophgo,cv1810-clk + deprecated: true reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/sophgo,sg2044-clk.yaml b/Documentation/devicetree/bindings/clock/sophgo,sg2044-clk.yaml new file mode 100644 index 000000000000..272e58bdb62c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sophgo,sg2044-clk.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/sophgo,sg2044-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sophgo SG2044 Clock Controller + +maintainers: + - Inochi Amaoto <inochiama@gmail.com> + +description: | + The Sophgo SG2044 clock controller requires an external oscillator + as input clock. + + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/sophgo,sg2044-clk.h + +properties: + compatible: + const: sophgo,sg2044-clk + + reg: + maxItems: 1 + + clocks: + items: + - description: fpll0 + - description: fpll1 + - description: fpll2 + - description: dpll0 + - description: dpll1 + - description: dpll2 + - description: dpll3 + - description: dpll4 + - description: dpll5 + - description: dpll6 + - description: dpll7 + - description: mpll0 + - description: mpll1 + - description: mpll2 + - description: mpll3 + - description: mpll4 + - description: mpll5 + + clock-names: + items: + - const: fpll0 + - const: fpll1 + - const: fpll2 + - const: dpll0 + - const: dpll1 + - const: dpll2 + - const: dpll3 + - const: dpll4 + - const: dpll5 + - const: dpll6 + - const: dpll7 + - const: mpll0 + - const: mpll1 + - const: mpll2 + - const: mpll3 + - const: mpll4 + - const: mpll5 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sophgo,sg2044-pll.h> + + clock-controller@50002000 { + compatible = "sophgo,sg2044-clk"; + reg = <0x50002000 0x1000>; + #clock-cells = <1>; + clocks = <&syscon CLK_FPLL0>, <&syscon CLK_FPLL1>, + <&syscon CLK_FPLL2>, <&syscon CLK_DPLL0>, + <&syscon CLK_DPLL1>, <&syscon CLK_DPLL2>, + <&syscon CLK_DPLL3>, <&syscon CLK_DPLL4>, + <&syscon CLK_DPLL5>, <&syscon CLK_DPLL6>, + <&syscon CLK_DPLL7>, <&syscon CLK_MPLL0>, + <&syscon CLK_MPLL1>, <&syscon CLK_MPLL2>, + <&syscon CLK_MPLL3>, <&syscon CLK_MPLL4>, + <&syscon CLK_MPLL5>; + clock-names = "fpll0", "fpll1", "fpll2", "dpll0", + "dpll1", "dpll2", "dpll3", "dpll4", + "dpll5", "dpll6", "dpll7", "mpll0", + "mpll1", "mpll2", "mpll3", "mpll4", + "mpll5"; + }; diff --git a/Documentation/devicetree/bindings/clock/spacemit,k1-pll.yaml b/Documentation/devicetree/bindings/clock/spacemit,k1-pll.yaml new file mode 100644 index 000000000000..06bafd68c00a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/spacemit,k1-pll.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/spacemit,k1-pll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SpacemiT K1 PLL + +maintainers: + - Haylen Chu <heylenay@4d2.org> + +properties: + compatible: + const: spacemit,k1-pll + + reg: + maxItems: 1 + + clocks: + description: External 24MHz oscillator + + spacemit,mpmu: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the "Main PMU (MPMU)" syscon. It is used to check PLL + lock status. + + "#clock-cells": + const: 1 + description: + See <dt-bindings/clock/spacemit,k1-syscon.h> for valid indices. + +required: + - compatible + - reg + - clocks + - spacemit,mpmu + - "#clock-cells" + +additionalProperties: false + +examples: + - | + clock-controller@d4090000 { + compatible = "spacemit,k1-pll"; + reg = <0xd4090000 0x1000>; + clocks = <&vctcxo_24m>; + spacemit,mpmu = <&sysctl_mpmu>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt deleted file mode 100644 index cac24ee10b72..000000000000 --- a/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt +++ /dev/null @@ -1,71 +0,0 @@ -STMicroelectronics STM32H7 Reset and Clock Controller -===================================================== - -The RCC IP is both a reset and a clock controller. - -Please refer to clock-bindings.txt for common clock controller binding usage. -Please also refer to reset.txt for common reset controller binding usage. - -Required properties: -- compatible: Should be: - "st,stm32h743-rcc" - -- reg: should be register base and length as documented in the - datasheet - -- #reset-cells: 1, see below - -- #clock-cells : from common clock binding; shall be set to 1 - -- clocks: External oscillator clock phandle - - high speed external clock signal (HSE) - - low speed external clock signal (LSE) - - external I2S clock (I2S_CKIN) - -Optional properties: -- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain - write protection (RTC clock). - -Example: - - rcc: reset-clock-controller@58024400 { - compatible = "st,stm32h743-rcc", "st,stm32-rcc"; - reg = <0x58024400 0x400>; - #reset-cells = <1>; - #clock-cells = <1>; - clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>; - - st,syscfg = <&pwrcfg>; -}; - -The peripheral clock consumer should specify the desired clock by -having the clock ID in its "clocks" phandle cell. - -Example: - - timer5: timer@40000c00 { - compatible = "st,stm32-timer"; - reg = <0x40000c00 0x400>; - interrupts = <50>; - clocks = <&rcc TIM5_CK>; - }; - -Specifying softreset control of devices -======================================= - -Device nodes should specify the reset channel required in their "resets" -property, containing a phandle to the reset device node and an index specifying -which channel to use. -The index is the bit number within the RCC registers bank, starting from RCC -base address. -It is calculated as: index = register_offset / 4 * 32 + bit_offset. -Where bit_offset is the bit offset within the register. - -For example, for CRC reset: - crc = AHB4RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x88 / 4 * 32 + 19 = 1107 - -Example: - - timer2 { - resets = <&rcc STM32H7_APB1L_RESET(TIM2)>; - }; diff --git a/Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml b/Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml index 0129bd0ba4b3..9d058c00ab3d 100644 --- a/Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml +++ b/Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml @@ -8,7 +8,8 @@ title: T-HEAD TH1520 AP sub-system clock controller description: | The T-HEAD TH1520 AP sub-system clock controller configures the - CPU, DPU, GMAC and TEE PLLs. + CPU, DPU, GMAC and TEE PLLs. Additionally the VO subsystem configures + the clock gates for the HDMI, MIPI and the GPU. SoC reference manual https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf @@ -20,14 +21,24 @@ maintainers: properties: compatible: - const: thead,th1520-clk-ap + enum: + - thead,th1520-clk-ap + - thead,th1520-clk-vo reg: maxItems: 1 clocks: items: - - description: main oscillator (24MHz) + - description: | + One input clock: + - For "thead,th1520-clk-ap": the clock input must be the 24 MHz + main oscillator. + - For "thead,th1520-clk-vo": the clock input must be the VIDEO_PLL, + which is configured by the AP clock controller. According to the + TH1520 manual, VIDEO_PLL is a Silicon Creations Sigma-Delta PLL + (integer PLL) typically running at 792 MHz (FOUTPOSTDIV), with + a maximum FOUTVCO of 2376 MHz. "#clock-cells": const: 1 diff --git a/Documentation/devicetree/bindings/clock/vf610-clock.txt b/Documentation/devicetree/bindings/clock/vf610-clock.txt deleted file mode 100644 index 109ffa3a5b66..000000000000 --- a/Documentation/devicetree/bindings/clock/vf610-clock.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Clock bindings for Freescale Vybrid VF610 SOC - -Required properties: -- compatible: Should be "fsl,vf610-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> - -Optional properties: -- clocks: list of clock identifiers which are external input clocks to the - given clock controller. Please refer the next section to find - the input clocks for a given controller. -- clock-names: list of names of clocks which are external input clocks to the - given clock controller. - -Input clocks for top clock controller: - - sxosc (external crystal oscillator 32KHz, recommended) - - fxosc (external crystal oscillator 24MHz, recommended) - - audio_ext - - enet_ext - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h -for the full list of VF610 clock IDs. - -Examples: - -clks: ccm@4006b000 { - compatible = "fsl,vf610-ccm"; - reg = <0x4006b000 0x1000>; - #clock-cells = <1>; - clocks = <&sxosc>, <&fxosc>; - clock-names = "sxosc", "fxosc"; -}; - -uart1: serial@40028000 { - compatible = "fsl,vf610-uart"; - reg = <0x40028000 0x1000>; - interrupts = <0 62 0x04>; - clocks = <&clks VF610_CLK_UART1>; - clock-names = "ipg"; -}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml index fda0467cdd95..23fe8ff76645 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml @@ -52,6 +52,7 @@ properties: - const: mediatek,mt8173-i2c - items: - enum: + - mediatek,mt6893-i2c - mediatek,mt8195-i2c - const: mediatek,mt8192-i2c diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml index 8101afa6f146..2f1e97969c3f 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml @@ -37,6 +37,7 @@ properties: - rockchip,px30-i2c - rockchip,rk3308-i2c - rockchip,rk3328-i2c + - rockchip,rk3528-i2c - rockchip,rk3562-i2c - rockchip,rk3568-i2c - rockchip,rk3576-i2c diff --git a/Documentation/devicetree/bindings/i2c/i2c-wmt.txt b/Documentation/devicetree/bindings/i2c/i2c-wmt.txt deleted file mode 100644 index 94a425eaa6c7..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-wmt.txt +++ /dev/null @@ -1,24 +0,0 @@ -* Wondermedia I2C Controller - -Required properties : - - - compatible : should be "wm,wm8505-i2c" - - reg : Offset and length of the register set for the device - - interrupts : <IRQ> where IRQ is the interrupt number - - clocks : phandle to the I2C clock source - -Optional properties : - - - clock-frequency : desired I2C bus clock frequency in Hz. - Valid values are 100000 and 400000. - Default to 100000 if not specified, or invalid value. - -Example : - - i2c_0: i2c@d8280000 { - compatible = "wm,wm8505-i2c"; - reg = <0xd8280000 0x1000>; - interrupts = <19>; - clocks = <&clki2c0>; - clock-frequency = <400000>; - }; diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml index 1b7fed232642..cc39511a49d6 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml +++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml @@ -29,6 +29,7 @@ properties: - enum: - renesas,riic-r9a08g045 # RZ/G3S - renesas,riic-r9a09g047 # RZ/G3E + - renesas,riic-r9a09g056 # RZ/V2N - const: renesas,riic-r9a09g057 # RZ/V2H(P) - const: renesas,riic-r9a09g057 # RZ/V2H(P) diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml index bc5d0fb5abfe..d904191bb0c6 100644 --- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml @@ -32,15 +32,13 @@ properties: - const: renesas,r9a06g032-i2c # RZ/N1D - const: renesas,rzn1-i2c # RZ/N1 - const: snps,designware-i2c - - description: Microsemi Ocelot SoCs I2C controller - items: - - const: mscc,ocelot-i2c - - const: snps,designware-i2c - description: Baikal-T1 SoC System I2C controller const: baikal,bt1-sys-i2c - - description: T-HEAD TH1520 SoCs I2C controller - items: - - const: thead,th1520-i2c + - items: + - enum: + - mscc,ocelot-i2c + - sophgo,sg2044-i2c + - thead,th1520-i2c - const: snps,designware-i2c reg: diff --git a/Documentation/devicetree/bindings/i2c/wm,wm8505-i2c.yaml b/Documentation/devicetree/bindings/i2c/wm,wm8505-i2c.yaml new file mode 100644 index 000000000000..e498ce47b885 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/wm,wm8505-i2c.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/wm,wm8505-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I2C Controller on WonderMedia WM8505 and related SoCs + +maintainers: + - Alexey Charkov <alchark@gmail.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: wm,wm8505-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: + enum: [100000, 400000] + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + i2c_0: i2c@d8280000 { + compatible = "wm,wm8505-i2c"; + reg = <0xd8280000 0x1000>; + interrupts = <19>; + clocks = <&clki2c0>; + clock-frequency = <400000>; + }; diff --git a/Documentation/devicetree/bindings/misc/ti,fpc202.yaml b/Documentation/devicetree/bindings/misc/ti,fpc202.yaml new file mode 100644 index 000000000000..a8cb10f2d0df --- /dev/null +++ b/Documentation/devicetree/bindings/misc/ti,fpc202.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/ti,fpc202.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI FPC202 dual port controller with expanded IOs + +maintainers: + - Romain Gantois <romain.gantois@bootlin.com> + +allOf: + - $ref: /schemas/i2c/i2c-atr.yaml# + +properties: + compatible: + const: ti,fpc202 + + reg: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + enable-gpios: + description: + Specifier for the GPIO connected to the EN pin. + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^i2c@[0-1]$": + $ref: /schemas/i2c/i2c-controller.yaml# + description: Downstream device ports 0 and 1 + + properties: + reg: + maxItems: 1 + description: + Downstream port ID + + required: + - "#address-cells" + - "#size-cells" + - reg + + unevaluatedProperties: false + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2c-atr@f { + compatible = "ti,fpc202"; + reg = <0xf>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl-a4.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl-a4.yaml index 78279b9fb737..a6ef4797e5c5 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl-a4.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl-a4.yaml @@ -14,7 +14,12 @@ allOf: properties: compatible: - const: amlogic,pinctrl-a4 + oneOf: + - const: amlogic,pinctrl-a4 + - items: + - enum: + - amlogic,pinctrl-a5 + - const: amlogic,pinctrl-a4 "#address-cells": const: 2 diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-iomuxc1.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-iomuxc1.yaml new file mode 100644 index 000000000000..957918b73a93 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-iomuxc1.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imx7ulp-iomuxc1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX7ULP IOMUX Controller + +description: | + i.MX 7ULP has three IOMUXC instances: IOMUXC0 for M4 ports, IOMUXC1 for A7 + ports and IOMUXC DDR for DDR interface. + + Note: This binding doc is only for the IOMUXC1 support in A7 Domain and it + only supports generic pin config. + + Please refer to fsl,imx-pinctrl.txt in this directory for common binding + part and usage. + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: fsl,imx7ulp-iomuxc1 + + reg: + maxItems: 1 + +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + Each entry consists of 5 integers which represents the mux + and config setting for one pin. The first 4 integers + <mux_conf_reg input_reg mux_mode input_val> are specified + using a PIN_FUNC_ID macro, which can be found in + imx7ulp-pinfunc.h in the device tree source folder. + The last integer CONFIG is the pad setting value like + pull-up on this pin. + + Please refer to i.MX7ULP Reference Manual for detailed + CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_conf_reg" indicates the offset of mux register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_mode" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + CONFIG bits definition: + PAD_CTL_OBE (1 << 17) + PAD_CTL_IBE (1 << 16) + PAD_CTL_LK (1 << 16) + PAD_CTL_DSE_HI (1 << 6) + PAD_CTL_DSE_STD (0 << 6) + PAD_CTL_ODE (1 << 5) + PAD_CTL_PUSH_PULL (0 << 5) + PAD_CTL_SRE_SLOW (1 << 2) + PAD_CTL_SRE_STD (0 << 2) + PAD_CTL_PE (1 << 0) + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +allOf: + - $ref: pinctrl.yaml# + +unevaluatedProperties: false + +examples: + - | + pinctrl@40ac0000 { + compatible = "fsl,imx7ulp-iomuxc1"; + reg = <0x40ac0000 0x1000>; + + lpuart4grp { + fsl,pins = < + 0x000c 0x0248 0x4 0x1 0x1 + 0x0008 0x024c 0x4 0x1 0x1 + >; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt deleted file mode 100644 index bfa3703a7446..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt +++ /dev/null @@ -1,53 +0,0 @@ -* Freescale i.MX7ULP IOMUX Controller - -i.MX 7ULP has three IOMUXC instances: IOMUXC0 for M4 ports, IOMUXC1 for A7 -ports and IOMUXC DDR for DDR interface. - -Note: -This binding doc is only for the IOMUXC1 support in A7 Domain and it only -supports generic pin config. - -Please refer to fsl,imx-pinctrl.txt in this directory for common binding -part and usage. - -Required properties: -- compatible: "fsl,imx7ulp-iomuxc1". -- fsl,pins: Each entry consists of 5 integers which represents the mux - and config setting for one pin. The first 4 integers - <mux_conf_reg input_reg mux_mode input_val> are specified - using a PIN_FUNC_ID macro, which can be found in - imx7ulp-pinfunc.h in the device tree source folder. - The last integer CONFIG is the pad setting value like - pull-up on this pin. - - Please refer to i.MX7ULP Reference Manual for detailed - CONFIG settings. - -CONFIG bits definition: -PAD_CTL_OBE (1 << 17) -PAD_CTL_IBE (1 << 16) -PAD_CTL_LK (1 << 16) -PAD_CTL_DSE_HI (1 << 6) -PAD_CTL_DSE_STD (0 << 6) -PAD_CTL_ODE (1 << 5) -PAD_CTL_PUSH_PULL (0 << 5) -PAD_CTL_SRE_SLOW (1 << 2) -PAD_CTL_SRE_STD (0 << 2) -PAD_CTL_PE (1 << 0) - -Examples: -#include "imx7ulp-pinfunc.h" - -/* Pin Controller Node */ -iomuxc1: pinctrl@40ac0000 { - compatible = "fsl,imx7ulp-iomuxc1"; - reg = <0x40ac0000 0x1000>; - - /* Pin Configuration Node */ - pinctrl_lpuart4: lpuart4grp { - fsl,pins = < - IMX7ULP_PAD_PTC3__LPUART4_RX 0x1 - IMX7ULP_PAD_PTC2__LPUART4_TX 0x1 - >; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,vf610-iomuxc.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,vf610-iomuxc.yaml new file mode 100644 index 000000000000..3e13587df310 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,vf610-iomuxc.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,vf610-iomuxc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Vybrid VF610 IOMUX Controller + +description: + Please refer to fsl,imx-pinctrl.txt in this directory for common binding part + and usage. + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: fsl,vf610-iomuxc + + reg: + maxItems: 1 + +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + two integers array, represents a group of pins mux and config setting. + The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a pin + working on a specific function, CONFIG is the pad setting value such + as pull-up, speed, ode for this pin. Please refer to Vybrid VF610 + datasheet for the valid pad config settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: + PIN_FUN_ID refer to vf610-pinfunc.h in device tree source folder + for all available PIN_FUNC_ID for Vybrid VF610. + - description: | + CONFIG bits definition is + PAD_CTL_SPEED_LOW (1 << 12) + PAD_CTL_SPEED_MED (2 << 12) + PAD_CTL_SPEED_HIGH (3 << 12) + PAD_CTL_SRE_FAST (1 << 11) + PAD_CTL_SRE_SLOW (0 << 11) + PAD_CTL_ODE (1 << 10) + PAD_CTL_HYS (1 << 9) + PAD_CTL_DSE_DISABLE (0 << 6) + PAD_CTL_DSE_150ohm (1 << 6) + PAD_CTL_DSE_75ohm (2 << 6) + PAD_CTL_DSE_50ohm (3 << 6) + PAD_CTL_DSE_37ohm (4 << 6) + PAD_CTL_DSE_30ohm (5 << 6) + PAD_CTL_DSE_25ohm (6 << 6) + PAD_CTL_DSE_20ohm (7 << 6) + PAD_CTL_PUS_100K_DOWN (0 << 4) + PAD_CTL_PUS_47K_UP (1 << 4) + PAD_CTL_PUS_100K_UP (2 << 4) + PAD_CTL_PUS_22K_UP (3 << 4) + PAD_CTL_PKE (1 << 3) + PAD_CTL_PUE (1 << 2) + PAD_CTL_OBE_ENABLE (1 << 1) + PAD_CTL_IBE_ENABLE (1 << 0) + PAD_CTL_OBE_IBE_ENABLE (3 << 0) + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +allOf: + - $ref: pinctrl.yaml# + +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt deleted file mode 100644 index ddcdeb697c29..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt +++ /dev/null @@ -1,41 +0,0 @@ -Freescale Vybrid VF610 IOMUX Controller - -Please refer to fsl,imx-pinctrl.txt in this directory for common binding part -and usage. - -Required properties: -- compatible: "fsl,vf610-iomuxc" -- fsl,pins: two integers array, represents a group of pins mux and config - setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is - a pin working on a specific function, CONFIG is the pad setting value - such as pull-up, speed, ode for this pin. Please refer to Vybrid VF610 - datasheet for the valid pad config settings. - -CONFIG bits definition: -PAD_CTL_SPEED_LOW (1 << 12) -PAD_CTL_SPEED_MED (2 << 12) -PAD_CTL_SPEED_HIGH (3 << 12) -PAD_CTL_SRE_FAST (1 << 11) -PAD_CTL_SRE_SLOW (0 << 11) -PAD_CTL_ODE (1 << 10) -PAD_CTL_HYS (1 << 9) -PAD_CTL_DSE_DISABLE (0 << 6) -PAD_CTL_DSE_150ohm (1 << 6) -PAD_CTL_DSE_75ohm (2 << 6) -PAD_CTL_DSE_50ohm (3 << 6) -PAD_CTL_DSE_37ohm (4 << 6) -PAD_CTL_DSE_30ohm (5 << 6) -PAD_CTL_DSE_25ohm (6 << 6) -PAD_CTL_DSE_20ohm (7 << 6) -PAD_CTL_PUS_100K_DOWN (0 << 4) -PAD_CTL_PUS_47K_UP (1 << 4) -PAD_CTL_PUS_100K_UP (2 << 4) -PAD_CTL_PUS_22K_UP (3 << 4) -PAD_CTL_PKE (1 << 3) -PAD_CTL_PUE (1 << 2) -PAD_CTL_OBE_ENABLE (1 << 1) -PAD_CTL_IBE_ENABLE (1 << 0) -PAD_CTL_OBE_IBE_ENABLE (3 << 0) - -Please refer to vf610-pinfunc.h in device tree source folder -for all available PIN_FUNC_ID for Vybrid VF610. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml index bccff08a5ba3..b9680b896f12 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml @@ -136,75 +136,44 @@ examples: #address-cells = <2>; #size-cells = <2>; - syscfg_pctl_a: syscfg-pctl-a@10005000 { - compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon"; - reg = <0 0x10005000 0 0x1000>; - }; - - syscfg_pctl_b: syscfg-pctl-b@1020c020 { - compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon"; - reg = <0 0x1020C020 0 0x1000>; - }; - pinctrl@1c20800 { - compatible = "mediatek,mt8135-pinctrl"; - reg = <0 0x1000B000 0 0x1000>; - mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - - i2c0_pins_a: i2c0-pins { - pins1 { - pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>, - <MT8135_PIN_101_SCL0__FUNC_SCL0>; - bias-disable; - }; - }; - - i2c1_pins_a: i2c1-pins { - pins { - pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>, - <MT8135_PIN_196_SCL1__FUNC_SCL1>; - bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + compatible = "mediatek,mt8135-pinctrl"; + reg = <0 0x1000B000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + + i2c0_pins_a: i2c0-pins { + pins1 { + pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>, + <MT8135_PIN_101_SCL0__FUNC_SCL0>; + bias-disable; + }; }; - }; - i2c2_pins_a: i2c2-pins { - pins1 { - pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>; - bias-pull-down; + i2c1_pins_a: i2c1-pins { + pins { + pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>, + <MT8135_PIN_196_SCL1__FUNC_SCL1>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; }; - pins2 { - pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>; - bias-pull-up; - }; - }; - - i2c3_pins_a: i2c3-pins { - pins1 { - pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>, - <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>; - bias-pull-up = <MTK_PUPD_SET_R1R0_01>; - }; - - pins2 { - pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>, - <MT8135_PIN_36_SDA3__FUNC_SDA3>; - output-low; - bias-pull-up = <MTK_PUPD_SET_R1R0_01>; - }; + i2c2_pins_a: i2c2-pins { + pins1 { + pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>; + bias-pull-down; + }; - pins3 { - pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>, - <MT8135_PIN_60_JTDI__FUNC_JTDI>; - drive-strength = <32>; + pins2 { + pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>; + bias-pull-up; + }; }; - }; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml index 3bbc00df5548..f4bab7a132d3 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml @@ -245,9 +245,4 @@ examples: }; }; }; - - mmc0 { - pinctrl-0 = <&mmc0_pins_default>; - pinctrl-names = "default"; - }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6893-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6893-pinctrl.yaml new file mode 100644 index 000000000000..fa189fe00624 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6893-pinctrl.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6893-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6893 Pin Controller + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + +description: + The MediaTek's MT6893 Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt6893-pinctrl + + reg: + items: + - description: pin controller base + - description: rm group IO + - description: bm group IO + - description: lm group IO + - description: lb group IO + - description: rt group IO + - description: lt group IO + - description: tm group IO + - description: External Interrupt (EINT) controller base + + reg-names: + items: + - const: base + - const: rm + - const: bm + - const: lm + - const: lb + - const: rt + - const: lt + - const: tm + - const: eint + + gpio-controller: true + + '#gpio-cells': + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. + const: 2 + + gpio-ranges: + maxItems: 1 + + gpio-line-names: true + + interrupts: + description: The interrupt outputs to sysirq + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + +# PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '^pins': + type: object + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml + - $ref: /schemas/pinctrl/pinmux-node.yaml + description: + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input + schmitt. + + properties: + pinmux: + description: + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux are defined as macros in + arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h for this SoC. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + drive-strength-microamp: + enum: [125, 250, 500, 1000] + + bias-pull-down: + oneOf: + - type: boolean + - enum: [75000, 5000] + description: Pull down RSEL type resistance values (in ohms) + description: + For normal pull down type there is no need to specify a resistance + value, hence this can be specified as a boolean property. + For RSEL pull down type a resistance value (in ohms) can be added. + + bias-pull-up: + oneOf: + - type: boolean + - enum: [10000, 5000, 4000, 3000] + description: Pull up RSEL type resistance values (in ohms) + description: + For normal pull up type there is no need to specify a resistance + value, hence this can be specified as a boolean property. + For RSEL pull up type a resistance value (in ohms) can be added. + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + required: + - pinmux + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/mt65xx.h> + #define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) + #define PINMUX_GPIO99__FUNC_SCL0 (MTK_PIN_NO(99) | 1) + #define PINMUX_GPIO100__FUNC_SDA0 (MTK_PIN_NO(100) | 1) + + pio: pinctrl@10005000 { + compatible = "mediatek,mt6893-pinctrl"; + reg = <0x10005000 0x1000>, + <0x11c20000 0x0200>, + <0x11d10000 0x0200>, + <0x11e20000 0x0200>, + <0x11e70000 0x0200>, + <0x11ea0000 0x0200>, + <0x11f20000 0x0200>, + <0x11f30000 0x0200>, + <0x1100b000 0x1000>; + reg-names = "base", "rm", "bm", "lm", "lb", "rt", + "lt", "tm", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 220>; + interrupt-controller; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>; + #interrupt-cells = <2>; + + gpio-pins { + pins { + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; + bias-pull-up = <4000>; + drive-strength = <6>; + }; + }; + + i2c0-pins { + pins-bus { + pinmux = <PINMUX_GPIO99__FUNC_SCL0>, + <PINMUX_GPIO100__FUNC_SDA0>; + bias-pull-down = <75000>; + drive-strength-microamp = <1000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml index d74cae9d4d65..9acca85184fa 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml @@ -366,34 +366,34 @@ examples: #size-cells = <2>; pio: pinctrl@10211000 { - compatible = "mediatek,mt7622-pinctrl"; - reg = <0 0x10211000 0 0x1000>; - gpio-controller; - #gpio-cells = <2>; - - pinctrl_eth_default: eth-pins { - mux-mdio { - groups = "mdc_mdio"; - function = "eth"; - drive-strength = <12>; + compatible = "mediatek,mt7622-pinctrl"; + reg = <0 0x10211000 0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + + pinctrl_eth_default: eth-pins { + mux-mdio { + groups = "mdc_mdio"; + function = "eth"; + drive-strength = <12>; + }; + + mux-gmac2 { + groups = "rgmii_via_gmac2"; + function = "eth"; + drive-strength = <12>; + }; + + mux-esw { + groups = "esw"; + function = "eth"; + drive-strength = <8>; + }; + + conf-mdio { + pins = "MDC"; + bias-pull-up; + }; }; - - mux-gmac2 { - groups = "rgmii_via_gmac2"; - function = "eth"; - drive-strength = <12>; - }; - - mux-esw { - groups = "esw"; - function = "eth"; - drive-strength = <8>; - }; - - conf-mdio { - pins = "MDC"; - bias-pull-up; - }; - }; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml index 8507bd15f243..464879274cae 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml @@ -195,43 +195,43 @@ examples: #size-cells = <2>; pio: pinctrl@10005000 { - compatible = "mediatek,mt8183-pinctrl"; - reg = <0 0x10005000 0 0x1000>, - <0 0x11f20000 0 0x1000>, - <0 0x11e80000 0 0x1000>, - <0 0x11e70000 0 0x1000>, - <0 0x11e90000 0 0x1000>, - <0 0x11d30000 0 0x1000>, - <0 0x11d20000 0 0x1000>, - <0 0x11c50000 0 0x1000>, - <0 0x11f30000 0 0x1000>, - <0 0x1000b000 0 0x1000>; - reg-names = "iocfg0", "iocfg1", "iocfg2", - "iocfg3", "iocfg4", "iocfg5", - "iocfg6", "iocfg7", "iocfg8", - "eint"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pio 0 0 192>; - interrupt-controller; - interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - - i2c0_pins_a: i2c0-pins { - pins1 { - pinmux = <PINMUX_GPIO48__FUNC_SCL5>, - <PINMUX_GPIO49__FUNC_SDA5>; - mediatek,pull-up-adv = <3>; - drive-strength-microamp = <1000>; + compatible = "mediatek,mt8183-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x11f20000 0 0x1000>, + <0 0x11e80000 0 0x1000>, + <0 0x11e70000 0 0x1000>, + <0 0x11e90000 0 0x1000>, + <0 0x11d30000 0 0x1000>, + <0 0x11d20000 0 0x1000>, + <0 0x11c50000 0 0x1000>, + <0 0x11f30000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "iocfg0", "iocfg1", "iocfg2", + "iocfg3", "iocfg4", "iocfg5", + "iocfg6", "iocfg7", "iocfg8", + "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 192>; + interrupt-controller; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + + i2c0_pins_a: i2c0-pins { + pins1 { + pinmux = <PINMUX_GPIO48__FUNC_SCL5>, + <PINMUX_GPIO49__FUNC_SDA5>; + mediatek,pull-up-adv = <3>; + drive-strength-microamp = <1000>; + }; }; - }; - i2c1_pins_a: i2c1-pins { - pins { - pinmux = <PINMUX_GPIO50__FUNC_SCL3>, - <PINMUX_GPIO51__FUNC_SDA3>; - mediatek,pull-down-adv = <2>; + i2c1_pins_a: i2c1-pins { + pins { + pinmux = <PINMUX_GPIO50__FUNC_SCL3>, + <PINMUX_GPIO51__FUNC_SDA3>; + mediatek,pull-down-adv = <2>; + }; }; - }; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml index 1686427eb854..949dcd6fd847 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml @@ -142,43 +142,43 @@ additionalProperties: false examples: - | - #include <dt-bindings/pinctrl/mt8192-pinfunc.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - pio: pinctrl@10005000 { - compatible = "mediatek,mt8192-pinctrl"; - reg = <0x10005000 0x1000>, - <0x11c20000 0x1000>, - <0x11d10000 0x1000>, - <0x11d30000 0x1000>, - <0x11d40000 0x1000>, - <0x11e20000 0x1000>, - <0x11e70000 0x1000>, - <0x11ea0000 0x1000>, - <0x11f20000 0x1000>, - <0x11f30000 0x1000>, - <0x1000b000 0x1000>; - reg-names = "iocfg0", "iocfg_rm", "iocfg_bm", - "iocfg_bl", "iocfg_br", "iocfg_lm", - "iocfg_lb", "iocfg_rt", "iocfg_lt", - "iocfg_tl", "eint"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pio 0 0 220>; - interrupt-controller; - interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>; - #interrupt-cells = <2>; - - spi1-default-pins { - pins-cs-mosi-clk { - pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>, - <PINMUX_GPIO159__FUNC_SPI1_A_MO>, - <PINMUX_GPIO156__FUNC_SPI1_A_CLK>; - bias-disable; - }; - - pins-miso { - pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>; - bias-pull-down; - }; - }; + #include <dt-bindings/pinctrl/mt8192-pinfunc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + pio: pinctrl@10005000 { + compatible = "mediatek,mt8192-pinctrl"; + reg = <0x10005000 0x1000>, + <0x11c20000 0x1000>, + <0x11d10000 0x1000>, + <0x11d30000 0x1000>, + <0x11d40000 0x1000>, + <0x11e20000 0x1000>, + <0x11e70000 0x1000>, + <0x11ea0000 0x1000>, + <0x11f20000 0x1000>, + <0x11f30000 0x1000>, + <0x1000b000 0x1000>; + reg-names = "iocfg0", "iocfg_rm", "iocfg_bm", + "iocfg_bl", "iocfg_br", "iocfg_lm", + "iocfg_lb", "iocfg_rt", "iocfg_lt", + "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 220>; + interrupt-controller; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>; + #interrupt-cells = <2>; + + spi1-default-pins { + pins-cs-mosi-clk { + pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>, + <PINMUX_GPIO159__FUNC_SPI1_A_MO>, + <PINMUX_GPIO156__FUNC_SPI1_A_CLK>; + bias-disable; }; + + pins-miso { + pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>; + bias-pull-down; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8196-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8196-pinctrl.yaml new file mode 100644 index 000000000000..9082bd625e2f --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8196-pinctrl.yaml @@ -0,0 +1,236 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8196-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT8196 Pin Controller + +maintainers: + - Lei Xue <lei.xue@mediatek.com> + - Cathy Xu <ot_cathy.xu@mediatek.com> + +description: + The MediaTek's MT8196 Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt8196-pinctrl + + reg: + items: + - description: gpio base + - description: rt group IO + - description: rm1 group IO + - description: rm2 group IO + - description: rb group IO + - description: bm1 group IO + - description: bm2 group IO + - description: bm3 group IO + - description: lt group IO + - description: lm1 group IO + - description: lm2 group IO + - description: lb1 group IO + - description: lb2 group IO + - description: tm1 group IO + - description: tm2 group IO + - description: tm3 group IO + - description: eint0 group IO + - description: eint1 group IO + - description: eint2 group IO + - description: eint3 group IO + - description: eint4 group IO + + reg-names: + items: + - const: base + - const: rt + - const: rm1 + - const: rm2 + - const: rb + - const: bm1 + - const: bm2 + - const: bm3 + - const: lt + - const: lm1 + - const: lm2 + - const: lb1 + - const: lb2 + - const: tm1 + - const: tm2 + - const: tm3 + - const: eint0 + - const: eint1 + - const: eint2 + - const: eint3 + - const: eint4 + + interrupts: + description: The interrupt outputs to sysirq. + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + gpio-controller: true + + '#gpio-cells': + description: + Number of cells in GPIO specifier, should be two. The first cell is the + pin number, the second cell is used to specify optional parameters which + are defined in <dt-bindings/gpio/gpio.h>. + const: 2 + + gpio-ranges: + maxItems: 1 + + gpio-line-names: true + +# PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '^pins': + type: object + $ref: /schemas/pinctrl/pincfg-node.yaml + additionalProperties: false + description: + A pinctrl node should contain at least one subnode representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input + schmitt. + + properties: + pinmux: + description: + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are + defined as macros in arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h + directly, for this SoC. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + bias-pull-down: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: mt8196 pull down PUPD/R0/R1 type define value. + - enum: [75000, 5000] + description: mt8196 pull down RSEL type si unit value(ohm). + description: | + For pull down type is normal, it doesn't need add R1R0 define + and resistance value. + For pull down type is PUPD/R0/R1 type, it can add R1R0 define to + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & + "MTK_PUPD_SET_R1R0_11" define in mt8196. + For pull down type is PD/RSEL, it can add resistance value(ohm) + to set different resistance by identifying property + "mediatek,rsel-resistance-in-si-unit". It can support resistance + value(ohm) "75000" & "5000" in mt8196. + + bias-pull-up: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: mt8196 pull up PUPD/R0/R1 type define value. + - enum: [1000, 1500, 2000, 3000, 4000, 5000, 75000] + description: mt8196 pull up RSEL type si unit value(ohm). + description: | + For pull up type is normal, it don't need add R1R0 define + and resistance value. + For pull up type is PUPD/R0/R1 type, it can add R1R0 define to + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & + "MTK_PUPD_SET_R1R0_11" define in mt8196. + For pull up type is PU/RSEL, it can add resistance value(ohm) + to set different resistance by identifying property + "mediatek,rsel-resistance-in-si-unit". It can support resistance + value(ohm) "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & + "75000" in mt8196. + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + required: + - pinmux + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/mt65xx.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #define PINMUX_GPIO99__FUNC_SCL0 (MTK_PIN_NO(99) | 1) + #define PINMUX_GPIO100__FUNC_SDA0 (MTK_PIN_NO(100) | 1) + + pio: pinctrl@1002d000 { + compatible = "mediatek,mt8196-pinctrl"; + reg = <0x1002d000 0x1000>, + <0x12000000 0x1000>, + <0x12020000 0x1000>, + <0x12040000 0x1000>, + <0x12060000 0x1000>, + <0x12820000 0x1000>, + <0x12840000 0x1000>, + <0x12860000 0x1000>, + <0x13000000 0x1000>, + <0x13020000 0x1000>, + <0x13040000 0x1000>, + <0x130f0000 0x1000>, + <0x13110000 0x1000>, + <0x13800000 0x1000>, + <0x13820000 0x1000>, + <0x13860000 0x1000>, + <0x12080000 0x1000>, + <0x12880000 0x1000>, + <0x13080000 0x1000>, + <0x13880000 0x1000>, + <0x1c54a000 0x1000>; + reg-names = "base", "rt", "rm1", "rm2", "rb" , "bm1", + "bm2", "bm3", "lt", "lm1", "lm2", "lb1", + "lb2", "tm1", "tm2", "tm3", "eint0", "eint1", + "eint2", "eint3", "eint4"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 271>; + interrupt-controller; + interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH 0>; + #interrupt-cells = <2>; + + i2c0-pins { + pins { + pinmux = <PINMUX_GPIO99__FUNC_SCL0>, + <PINMUX_GPIO100__FUNC_SDA0>; + bias-disable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml index 1ce4b5df584a..2791e578c1de 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml @@ -110,7 +110,7 @@ examples: <0x03c00000 0x300000>; reg-names = "east", "west", "south"; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-ranges = <&tlmm 0 0 123>; + gpio-ranges = <&tlmm 0 0 124>; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml index bb0d7132886a..489b41dcc179 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml @@ -106,7 +106,7 @@ examples: interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 133>; + gpio-ranges = <&tlmm 0 0 134>; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index 768bb3c2b456..5156d54b240b 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -27,6 +27,7 @@ properties: - renesas,r9a07g044-pinctrl # RZ/G2{L,LC} - renesas,r9a08g045-pinctrl # RZ/G3S - renesas,r9a09g047-pinctrl # RZ/G3E + - renesas,r9a09g056-pinctrl # RZ/V2N - renesas,r9a09g057-pinctrl # RZ/V2H(P) - items: @@ -145,6 +146,7 @@ allOf: contains: enum: - renesas,r9a09g047-pinctrl + - renesas,r9a09g056-pinctrl - renesas,r9a09g057-pinctrl then: properties: diff --git a/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml index b01ecd83b71b..d80e88aa07b4 100644 --- a/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml @@ -17,6 +17,19 @@ properties: items: - description: pinctrl io memory base + clocks: + items: + - description: Functional Clock + - description: Bus Clock + + clock-names: + items: + - const: func + - const: bus + + resets: + maxItems: 1 + patternProperties: '-cfg$': type: object @@ -94,6 +107,8 @@ patternProperties: required: - compatible - reg + - clocks + - clock-names additionalProperties: false @@ -108,6 +123,9 @@ examples: pinctrl@d401e000 { compatible = "spacemit,k1-pinctrl"; reg = <0x0 0xd401e000 0x0 0x400>; + clocks = <&syscon_apbc 42>, + <&syscon_apbc 94>; + clock-names = "func", "bus"; uart0_2_cfg: uart0-2-cfg { uart0-2-pins { diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml index e0f7503a9f35..c41dcaea568a 100644 --- a/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml @@ -25,6 +25,7 @@ properties: items: - enum: - renesas,r9a09g047-sys # RZ/G3E + - renesas,r9a09g056-sys # RZ/V2N - renesas,r9a09g057-sys # RZ/V2H reg: diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml index 51a4c48eea6d..0389355b9eca 100644 --- a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml @@ -551,6 +551,21 @@ properties: - renesas,r9a09g047e58 # Quad Cortex-A55 + Cortex-M33 + Ethos-U55 (21mm BGA) - const: renesas,r9a09g047 + - description: RZ/V2N (R9A09G056) + items: + - enum: + - renesas,rzv2n-evk # RZ/V2N EVK (RTK0EF0186C03000BJ) + - enum: + - renesas,r9a09g056n41 # RZ/V2N + - renesas,r9a09g056n42 # RZ/V2N with Mali-G31 support + - renesas,r9a09g056n43 # RZ/V2N with Mali-C55 support + - renesas,r9a09g056n44 # RZ/V2N with Mali-G31 + Mali-C55 support + - renesas,r9a09g056n45 # RZ/V2N with cryptographic extension support + - renesas,r9a09g056n46 # RZ/V2N with Mali-G31 + cryptographic extension support + - renesas,r9a09g056n47 # RZ/V2N with Mali-C55 + cryptographic extension support + - renesas,r9a09g056n48 # RZ/V2N with Mali-G31 + Mali-C55 + cryptographic extension support + - const: renesas,r9a09g056 + - description: RZ/V2H(P) (R9A09G057) items: - enum: diff --git a/Documentation/devicetree/bindings/soc/sophgo/sophgo,sg2044-top-syscon.yaml b/Documentation/devicetree/bindings/soc/sophgo/sophgo,sg2044-top-syscon.yaml new file mode 100644 index 000000000000..a82cc3cae576 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/sophgo/sophgo,sg2044-top-syscon.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/sophgo/sophgo,sg2044-top-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sophgo SG2044 SoC TOP system controller + +maintainers: + - Inochi Amaoto <inochiama@gmail.com> + +description: + The Sophgo SG2044 TOP system controller is a hardware block grouping + multiple small functions, such as clocks and some other internal + function. + +properties: + compatible: + items: + - const: sophgo,sg2044-top-syscon + - const: syscon + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/sophgo,sg2044-pll.h> for valid clock. + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + syscon@50000000 { + compatible = "sophgo,sg2044-top-syscon", "syscon"; + reg = <0x50000000 0x1000>; + #clock-cells = <1>; + clocks = <&osc>; + }; diff --git a/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml b/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml new file mode 100644 index 000000000000..30aaf49da03d --- /dev/null +++ b/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/spacemit/spacemit,k1-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SpacemiT K1 SoC System Controller + +maintainers: + - Haylen Chu <heylenay@4d2.org> + +description: + System controllers found on SpacemiT K1 SoC, which are capable of + clock, reset and power-management functions. + +properties: + compatible: + enum: + - spacemit,k1-syscon-apbc + - spacemit,k1-syscon-apmu + - spacemit,k1-syscon-mpmu + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + + clock-names: + items: + - const: osc + - const: vctcxo_1m + - const: vctcxo_3m + - const: vctcxo_24m + + "#clock-cells": + const: 1 + description: + See <dt-bindings/clock/spacemit,k1-syscon.h> for valid indices. + + "#power-domain-cells": + const: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + - "#reset-cells" + +allOf: + - if: + properties: + compatible: + contains: + const: spacemit,k1-syscon-apbc + then: + properties: + "#power-domain-cells": false + else: + required: + - "#power-domain-cells" + +additionalProperties: false + +examples: + - | + system-controller@d4050000 { + compatible = "spacemit,k1-syscon-mpmu"; + reg = <0xd4050000 0x209c>; + clocks = <&osc>, <&vctcxo_1m>, <&vctcxo_3m>, <&vctcxo_24m>; + clock-names = "osc", "vctcxo_1m", "vctcxo_3m", "vctcxo_24m"; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml index a03fff5df5ef..6c6043d9809e 100644 --- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml @@ -43,6 +43,7 @@ properties: - qcom,sm8450-ufshc - qcom,sm8550-ufshc - qcom,sm8650-ufshc + - qcom,sm8750-ufshc - const: qcom,ufshc - const: jedec,ufs-2.0 @@ -158,6 +159,7 @@ allOf: - qcom,sm8450-ufshc - qcom,sm8550-ufshc - qcom,sm8650-ufshc + - qcom,sm8750-ufshc then: properties: clocks: diff --git a/Documentation/driver-api/coco/index.rst b/Documentation/driver-api/coco/index.rst new file mode 100644 index 000000000000..af9f08ca0cfd --- /dev/null +++ b/Documentation/driver-api/coco/index.rst @@ -0,0 +1,12 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================== +Confidential Computing +====================== + +.. toctree:: + :maxdepth: 1 + + measurement-registers + +.. only:: subproject and html diff --git a/Documentation/driver-api/coco/measurement-registers.rst b/Documentation/driver-api/coco/measurement-registers.rst new file mode 100644 index 000000000000..962a44efa2c0 --- /dev/null +++ b/Documentation/driver-api/coco/measurement-registers.rst @@ -0,0 +1,12 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +===================== +Measurement Registers +===================== + +.. kernel-doc:: include/linux/tsm-mr.h + :internal: + +.. kernel-doc:: drivers/virt/coco/guest/tsm-mr.c + :export: diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index 16e2c4ec3c01..3e2a270bd828 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -81,6 +81,7 @@ Subsystem-specific APIs acpi/index backlight/lp855x-driver.rst clk + coco/index console crypto/index dmaengine/index diff --git a/Documentation/driver-api/ipmi.rst b/Documentation/driver-api/ipmi.rst index dfa021eacd63..2cc6c898ab90 100644 --- a/Documentation/driver-api/ipmi.rst +++ b/Documentation/driver-api/ipmi.rst @@ -45,7 +45,7 @@ manual), choose the 'IPMI SI handler' option. A driver also exists for direct I2C access to the IPMI management controller. Some boards support this, but it is unknown if it will work on every board. For this, choose 'IPMI SMBus handler', but be ready to try to do some -figuring to see if it will work on your system if the SMBIOS/APCI +figuring to see if it will work on your system if the SMBIOS/ACPI information is wrong or not present. It is fairly safe to have both these enabled and let the drivers auto-detect what is present. @@ -63,7 +63,7 @@ situation, you need to read the section below named 'The SI Driver' or IPMI defines a standard watchdog timer. You can enable this with the 'IPMI Watchdog Timer' config option. If you compile the driver into the kernel, then via a kernel command-line option you can have the -watchdog timer start as soon as it initializes. It also have a lot +watchdog timer start as soon as it initializes. It also has a lot of other options, see the 'Watchdog' section below for more details. Note that you can also have the watchdog continue to run if it is closed (by default it is disabled on close). Go into the 'Watchdog @@ -280,10 +280,8 @@ Creating the User To use the message handler, you must first create a user using ipmi_create_user. The interface number specifies which SMI you want to connect to, and you must supply callback functions to be called -when data comes in. The callback function can run at interrupt level, -so be careful using the callbacks. This also allows to you pass in a -piece of data, the handler_data, that will be passed back to you on -all calls. +when data comes in. This also allows to you pass in a piece of data, +the handler_data, that will be passed back to you on all calls. Once you are done, call ipmi_destroy_user() to get rid of the user. @@ -303,8 +301,7 @@ use it for anything you like. Responses come back in the function pointed to by the ipmi_recv_hndl field of the "handler" that you passed in to ipmi_create_user(). -Remember again, these may be running at interrupt level. Remember to -look at the receive type, too. +Remember to look at the receive type, too. From userland, you fill out an ipmi_req_t structure and use the IPMICTL_SEND_COMMAND ioctl. For incoming stuff, you can use select() @@ -317,13 +314,13 @@ This gives the receiver a place to actually put the message. If the message cannot fit into the data you provide, you will get an EMSGSIZE error and the driver will leave the data in the receive -queue. If you want to get it and have it truncate the message, us +queue. If you want to get it and have it truncate the message, use the IPMICTL_RECEIVE_MSG_TRUNC ioctl. When you send a command (which is defined by the lowest-order bit of the netfn per the IPMI spec) on the IPMB bus, the driver will automatically assign the sequence number to the command and save the -command. If the response is not receive in the IPMI-specified 5 +command. If the response is not received in the IPMI-specified 5 seconds, it will generate a response automatically saying the command timed out. If an unsolicited response comes in (if it was after 5 seconds, for instance), that response will be ignored. @@ -367,7 +364,7 @@ channel bitmasks do not overlap. To respond to a received command, set the response bit in the returned netfn, use the address from the received message, and use the same -msgid that you got in the receive message. +msgid that you got in the received message. From userland, equivalent IOCTLs are provided to do these functions. @@ -440,7 +437,7 @@ register would be 0xca6. This defaults to 1. The regsizes parameter gives the size of a register, in bytes. The data used by IPMI is 8-bits wide, but it may be inside a larger -register. This parameter allows the read and write type to specified. +register. This parameter allows the read and write type to be specified. It may be 1, 2, 4, or 8. The default is 1. Since the register size may be larger than 32 bits, the IPMI data may not @@ -481,8 +478,8 @@ If your IPMI interface does not support interrupts and is a KCS or SMIC interface, the IPMI driver will start a kernel thread for the interface to help speed things up. This is a low-priority kernel thread that constantly polls the IPMI driver while an IPMI operation -is in progress. The force_kipmid module parameter will all the user to -force this thread on or off. If you force it off and don't have +is in progress. The force_kipmid module parameter will allow the user +to force this thread on or off. If you force it off and don't have interrupts, the driver will run VERY slowly. Don't blame me, these interfaces suck. @@ -583,7 +580,7 @@ kernel command line as:: These are the same options as on the module command line. The I2C driver does not support non-blocking access or polling, so -this driver cannod to IPMI panic events, extend the watchdog at panic +this driver cannot do IPMI panic events, extend the watchdog at panic time, or other panic-related IPMI functions without special kernel patches and driver modifications. You can get those at the openipmi web page. @@ -610,7 +607,7 @@ Parameters are:: ipmi_ipmb.retry_time_ms=<Time between retries on IPMB> ipmi_ipmb.max_retries=<Number of times to retry a message> -Loading the module will not result in the driver automatcially +Loading the module will not result in the driver automatically starting unless there is device tree information setting it up. If you want to instantiate one of these by hand, do:: diff --git a/Documentation/filesystems/f2fs.rst b/Documentation/filesystems/f2fs.rst index e15c4275862a..440e4ae74e44 100644 --- a/Documentation/filesystems/f2fs.rst +++ b/Documentation/filesystems/f2fs.rst @@ -182,32 +182,34 @@ fault_type=%d Support configuring fault injection type, should be enabled with fault_injection option, fault type value is shown below, it supports single or combined type. - =========================== =========== + =========================== ========== Type_Name Type_Value - =========================== =========== - FAULT_KMALLOC 0x000000001 - FAULT_KVMALLOC 0x000000002 - FAULT_PAGE_ALLOC 0x000000004 - FAULT_PAGE_GET 0x000000008 - FAULT_ALLOC_BIO 0x000000010 (obsolete) - FAULT_ALLOC_NID 0x000000020 - FAULT_ORPHAN 0x000000040 - FAULT_BLOCK 0x000000080 - FAULT_DIR_DEPTH 0x000000100 - FAULT_EVICT_INODE 0x000000200 - FAULT_TRUNCATE 0x000000400 - FAULT_READ_IO 0x000000800 - FAULT_CHECKPOINT 0x000001000 - FAULT_DISCARD 0x000002000 - FAULT_WRITE_IO 0x000004000 - FAULT_SLAB_ALLOC 0x000008000 - FAULT_DQUOT_INIT 0x000010000 - FAULT_LOCK_OP 0x000020000 - FAULT_BLKADDR_VALIDITY 0x000040000 - FAULT_BLKADDR_CONSISTENCE 0x000080000 - FAULT_NO_SEGMENT 0x000100000 - FAULT_INCONSISTENT_FOOTER 0x000200000 - =========================== =========== + =========================== ========== + FAULT_KMALLOC 0x00000001 + FAULT_KVMALLOC 0x00000002 + FAULT_PAGE_ALLOC 0x00000004 + FAULT_PAGE_GET 0x00000008 + FAULT_ALLOC_BIO 0x00000010 (obsolete) + FAULT_ALLOC_NID 0x00000020 + FAULT_ORPHAN 0x00000040 + FAULT_BLOCK 0x00000080 + FAULT_DIR_DEPTH 0x00000100 + FAULT_EVICT_INODE 0x00000200 + FAULT_TRUNCATE 0x00000400 + FAULT_READ_IO 0x00000800 + FAULT_CHECKPOINT 0x00001000 + FAULT_DISCARD 0x00002000 + FAULT_WRITE_IO 0x00004000 + FAULT_SLAB_ALLOC 0x00008000 + FAULT_DQUOT_INIT 0x00010000 + FAULT_LOCK_OP 0x00020000 + FAULT_BLKADDR_VALIDITY 0x00040000 + FAULT_BLKADDR_CONSISTENCE 0x00080000 + FAULT_NO_SEGMENT 0x00100000 + FAULT_INCONSISTENT_FOOTER 0x00200000 + FAULT_TIMEOUT 0x00400000 (1000ms) + FAULT_VMALLOC 0x00800000 + =========================== ========== mode=%s Control block allocation mode which supports "adaptive" and "lfs". In "lfs" mode, there should be no random writes towards main area. diff --git a/Documentation/i2c/busses/i2c-parport.rst b/Documentation/i2c/busses/i2c-parport.rst index a9b4e8133700..4cbf45952d52 100644 --- a/Documentation/i2c/busses/i2c-parport.rst +++ b/Documentation/i2c/busses/i2c-parport.rst @@ -84,7 +84,7 @@ Remarks: \| must be 74HC05, they must be open collector output. - - All resitors are 10k. + - All resistors are 10k. - Pins 18-25 of the parallel port connected to GND. - Pins 4-9 (D2-D7) could be used as VDD is the driver drives them high. The ADM1032 evaluation board uses D4-D7. Beware that the amount of diff --git a/Documentation/scsi/scsi_mid_low_api.rst b/Documentation/scsi/scsi_mid_low_api.rst index 3cd6dce98e74..3ac4c7fafb55 100644 --- a/Documentation/scsi/scsi_mid_low_api.rst +++ b/Documentation/scsi/scsi_mid_low_api.rst @@ -37,7 +37,7 @@ ISA adapters).] The SCSI mid level isolates an LLD from other layers such as the SCSI upper layer drivers and the block layer. -This version of the document roughly matches linux kernel version 2.6.8 . +This version of the document roughly matches Linux kernel version 2.6.8 . Documentation ============= @@ -48,7 +48,7 @@ found in that directory. A more recent copy of this document may be found at https://docs.kernel.org/scsi/scsi_mid_low_api.html. Many LLDs are documented in Documentation/scsi (e.g. aic7xxx.rst). The SCSI mid-level is briefly described in scsi.rst which contains a URL to a document describing -the SCSI subsystem in the Linux Kernel 2.4 series. Two upper level +the SCSI subsystem in the Linux kernel 2.4 series. Two upper level drivers have documents in that directory: st.rst (SCSI tape driver) and scsi-generic.rst (for the sg driver). @@ -75,7 +75,7 @@ It is probably best to study how existing LLDs are organized. As the 2.5 series development kernels evolve into the 2.6 series production series, changes are being introduced into this interface. An example of this is driver initialization code where there are now 2 models -available. The older one, similar to what was found in the lk 2.4 series, +available. The older one, similar to what was found in the Linux 2.4 series, is based on hosts that are detected at HBA driver load time. This will be referred to the "passive" initialization model. The newer model allows HBAs to be hot plugged (and unplugged) during the lifetime of the LLD and will @@ -1026,7 +1026,7 @@ initialized from the driver's struct scsi_host_template instance. Members of interest: host_no - - system wide unique number that is used for identifying + - system-wide unique number that is used for identifying this host. Issued in ascending order from 0. can_queue - must be greater than 0; do not send more than can_queue @@ -1053,7 +1053,7 @@ of interest: - pointer to driver's struct scsi_host_template from which this struct Scsi_Host instance was spawned hostt->proc_name - - name of LLD. This is the driver name that sysfs uses + - name of LLD. This is the driver name that sysfs uses. transportt - pointer to driver's struct scsi_transport_template instance (if any). FC and SPI transports currently supported. @@ -1067,7 +1067,7 @@ The scsi_host structure is defined in include/scsi/scsi_host.h struct scsi_device ------------------ Generally, there is one instance of this structure for each SCSI logical unit -on a host. Scsi devices connected to a host are uniquely identified by a +on a host. SCSI devices connected to a host are uniquely identified by a channel number, target id and logical unit number (lun). The structure is defined in include/scsi/scsi_device.h @@ -1091,7 +1091,7 @@ Members of interest: - should be set by LLD prior to calling 'done'. A value of 0 implies a successfully completed command (and all data (if any) has been transferred to or from the SCSI - target device). 'result' is a 32 bit unsigned integer that + target device). 'result' is a 32-bit unsigned integer that can be viewed as 2 related bytes. The SCSI status value is in the LSB. See include/scsi/scsi.h status_byte() and host_byte() macros and related constants. @@ -1180,8 +1180,8 @@ may get out of synchronization. This is why it is best for the LLD to perform autosense. -Changes since lk 2.4 series -=========================== +Changes since Linux kernel 2.4 series +===================================== io_request_lock has been replaced by several finer grained locks. The lock relevant to LLDs is struct Scsi_Host::host_lock and there is one per SCSI host. diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst index c9e88bf65709..af66a05e18cc 100644 --- a/Documentation/trace/ftrace.rst +++ b/Documentation/trace/ftrace.rst @@ -1205,6 +1205,19 @@ Here are the available options: default instance. The only way the top level instance has this flag cleared, is by it being set in another instance. + copy_trace_marker + If there are applications that hard code writing into the top level + trace_marker file (/sys/kernel/tracing/trace_marker or trace_marker_raw), + and the tooling would like it to go into an instance, this option can + be used. Create an instance and set this option, and then all writes + into the top level trace_marker file will also be redirected into this + instance. + + Note, by default this option is set for the top level instance. If it + is disabled, then writes to the trace_marker or trace_marker_raw files + will not be written into the top level file. If no instance has this + option set, then a write will error with the errno of ENODEV. + annotate It is sometimes confusing when the CPU buffers are full and one CPU buffer had a lot of events recently, thus diff --git a/Documentation/trace/tracepoints.rst b/Documentation/trace/tracepoints.rst index decabcc77b56..b35c40e3abbe 100644 --- a/Documentation/trace/tracepoints.rst +++ b/Documentation/trace/tracepoints.rst @@ -71,7 +71,7 @@ In subsys/file.c (where the tracing statement must be added):: void somefct(void) { ... - trace_subsys_eventname(arg, task); + trace_subsys_eventname_tp(arg, task); ... } @@ -129,12 +129,12 @@ within an if statement with the following:: for (i = 0; i < count; i++) tot += calculate_nuggets(); - trace_foo_bar(tot); + trace_foo_bar_tp(tot); } -All trace_<tracepoint>() calls have a matching trace_<tracepoint>_enabled() +All trace_<tracepoint>_tp() calls have a matching trace_<tracepoint>_enabled() function defined that returns true if the tracepoint is enabled and -false otherwise. The trace_<tracepoint>() should always be within the +false otherwise. The trace_<tracepoint>_tp() should always be within the block of the if (trace_<tracepoint>_enabled()) to prevent races between the tracepoint being enabled and the check being seen. @@ -143,7 +143,10 @@ the static_key of the tracepoint to allow the if statement to be implemented with jump labels and avoid conditional branches. .. note:: The convenience macro TRACE_EVENT provides an alternative way to - define tracepoints. Check http://lwn.net/Articles/379903, + define tracepoints. Note, DECLARE_TRACE(foo) creates a function + "trace_foo_tp()" whereas TRACE_EVENT(foo) creates a function + "trace_foo()", and also exposes the tracepoint as a trace event in + /sys/kernel/tracing/events directory. Check http://lwn.net/Articles/379903, http://lwn.net/Articles/381064 and http://lwn.net/Articles/383362 for a series of articles with more details. @@ -159,7 +162,9 @@ In a C file:: void do_trace_foo_bar_wrapper(args) { - trace_foo_bar(args); + trace_foo_bar_tp(args); // for tracepoints created via DECLARE_TRACE + // or + trace_foo_bar(args); // for tracepoints created via TRACE_EVENT } In the header file:: |