diff options
Diffstat (limited to 'arch/arm/boot/dts/microchip/sama7d65.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/microchip/sama7d65.dtsi | 346 |
1 files changed, 346 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi index b6710ccd4c36..d08d773b1cc5 100644 --- a/arch/arm/boot/dts/microchip/sama7d65.dtsi +++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi @@ -47,12 +47,37 @@ }; }; + ns_sram: sram@100000 { + compatible = "mmio-sram"; + reg = <0x100000 0x20000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + }; + soc { compatible = "simple-bus"; ranges; #address-cells = <1>; #size-cells = <1>; + securam: sram@e0000800 { + compatible = "microchip,sama7d65-securam", "atmel,sama5d2-securam", "mmio-sram"; + reg = <0xe0000800 0x4000>; + ranges = <0 0xe0000800 0x4000>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>; + #address-cells = <1>; + #size-cells = <1>; + no-memory-wc; + }; + + secumod: security-module@e0004000 { + compatible = "microchip,sama7d65-secumod", "atmel,sama5d2-secumod", "syscon"; + reg = <0xe0004000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + }; + sfrbu: sfr@e0008000 { compatible ="microchip,sama7d65-sfrbu", "atmel,sama5d2-sfrbu", "syscon"; reg = <0xe0008000 0x20>; @@ -107,6 +132,13 @@ status = "disabled"; }; + rtt: rtc@e001d300 { + compatible = "microchip,sama7d65-rtt", "atmel,at91sam9260-rtt"; + reg = <0xe001d300 0x30>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk32k 0>; + }; + clk32k: clock-controller@e001d500 { compatible = "microchip,sama7d65-sckc", "microchip,sam9x60-sckc"; reg = <0xe001d500 0x4>; @@ -114,6 +146,11 @@ #clock-cells = <1>; }; + gpbr: syscon@e001d700 { + compatible = "microchip,sama7d65-gpbr", "syscon"; + reg = <0xe001d700 0x48>; + }; + rtc: rtc@e001d800 { compatible = "microchip,sama7d65-rtc", "microchip,sam9x60-rtc"; reg = <0xe001d800 0x30>; @@ -169,6 +206,38 @@ status = "disabled"; }; + gmac0: ethernet@e1618000 { + compatible = "microchip,sama7d65-gem", "microchip,sama7g5-gem"; + reg = <0xe1618000 0x2000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_GCK 46>, <&pmc PMC_TYPE_GCK 49>; + clock-names = "pclk", "hclk", "tx_clk", "tsu_clk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 46>, <&pmc PMC_TYPE_GCK 49>; + assigned-clock-rates = <125000000>, <200000000>; + status = "disabled"; + }; + + gmac1: ethernet@e161c000 { + compatible = "microchip,sama7d65-gem", "microchip,sama7g5-gem"; + reg = <0xe161c000 0x2000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_PERIPHERAL 47>,<&pmc PMC_TYPE_GCK 47>, <&pmc PMC_TYPE_GCK 50>; + clock-names = "pclk", "hclk", "tx_clk", "tsu_clk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 47>, <&pmc PMC_TYPE_GCK 50>; + assigned-clock-rates = <125000000>, <200000000>; + status = "disabled"; + }; + pit64b0: timer@e1800000 { compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b"; reg = <0xe1800000 0x100>; @@ -185,6 +254,199 @@ clock-names = "pclk", "gclk"; }; + flx0: flexcom@e1820000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe1820000 0x200>; + ranges = <0x0 0xe1820000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + uart0: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; + clock-names = "usart"; + dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>, + <&dma1 AT91_XDMAC_DT_PERID(5)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + i2c0: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; + #address-cells = <1>; + #size-cells = <0>; + atmel,fifo-size = <32>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(6)>, + <&dma0 AT91_XDMAC_DT_PERID(5)>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + flx1: flexcom@e1824000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe1824000 0x200>; + ranges = <0x0 0xe1824000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + spi1: spi@400 { + compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>; + clock-names = "spi_clk"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>, + <&dma0 AT91_XDMAC_DT_PERID(7)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + i2c1: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>, + <&dma0 AT91_XDMAC_DT_PERID(7)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + + flx2: flexcom@e1828000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe1828000 0x200>; + ranges = <0x0 0xe1828000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 36>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + uart2: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 36>; + clock-names = "usart"; + dmas = <&dma1 AT91_XDMAC_DT_PERID(10)>, + <&dma1 AT91_XDMAC_DT_PERID(9)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + }; + + flx3: flexcom@e182c000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe182c000 0x200>; + ranges = <0x0 0xe182c000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + i2c3: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; + #address-cells = <1>; + #size-cells = <1>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>, + <&dma0 AT91_XDMAC_DT_PERID(11)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + }; + + flx4: flexcom@e2018000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe2018000 0x200>; + ranges = <0x0 0xe2018000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + uart4: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + clock-names = "usart"; + dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>, + <&dma1 AT91_XDMAC_DT_PERID(13)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi4: spi@400 { + compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + clock-names = "spi_clk"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>, + <&dma0 AT91_XDMAC_DT_PERID(13)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + + flx5: flexcom@e201c000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe201c000 0x200>; + ranges = <0x0 0xe201c000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + i2c5: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(16)>, + <&dma0 AT91_XDMAC_DT_PERID(15)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + flx6: flexcom@e2020000 { compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; reg = <0xe2020000 0x200>; @@ -206,6 +468,80 @@ }; }; + flx7: flexcom@e2024000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe2024000 0x200>; + ranges = <0x0 0xe2024000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + uart7: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; + clock-names = "usart"; + dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>, + <&dma1 AT91_XDMAC_DT_PERID(19)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + }; + + flx8: flexcom@e281c000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe281c000 0x200>; + ranges = <0x0 0xe281c000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + i2c8: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>, + <&dma0 AT91_XDMAC_DT_PERID(21)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + + flx9: flexcom@e2820000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe2820000 0x200>; + ranges = <0x0 0xe281c000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + i2c9: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>, + <&dma0 AT91_XDMAC_DT_PERID(23)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + flx10: flexcom@e2824000 { compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; reg = <0xe2824000 0x200>; @@ -227,6 +563,16 @@ }; }; + uddrc: uddrc@e3800000 { + compatible = "microchip,sama7d65-uddrc", "microchip,sama7g5-uddrc"; + reg = <0xe3800000 0x4000>; + }; + + ddr3phy: ddr3phy@e3804000 { + compatible = "microchip,sama7d65-ddr3phy", "microchip,sama7g5-ddr3phy"; + reg = <0xe3804000 0x1000>; + }; + gic: interrupt-controller@e8c11000 { compatible = "arm,cortex-a7-gic"; reg = <0xe8c11000 0x1000>, |