diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom/qcom-msm8226.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/qcom/qcom-msm8226.dtsi | 164 |
1 files changed, 160 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi index 64c8ac94f352..51a7a3fb36d8 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include <dt-bindings/clock/qcom,mmcc-msm8974.h> #include <dt-bindings/clock/qcom,rpmcc.h> @@ -213,6 +214,18 @@ no-map; }; + mpss_region: mpss@8000000 { + reg = <0x08000000 0x5100000>; + no-map; + status = "disabled"; + }; + + mba_region: mba@d100000 { + reg = <0x0d100000 0x100000>; + no-map; + status = "disabled"; + }; + adsp_region: adsp@dc00000 { reg = <0x0dc00000 0x1900000>; no-map; @@ -253,6 +266,65 @@ }; }; + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + #address-cells = <1>; + #size-cells = <0>; + + mboxes = <0>, <&apcs 13>, <&apcs 9>, <&apcs 19>; + + apps_smsm: apps@0 { + reg = <0>; + #qcom,smem-state-cells = <1>; + }; + + modem_smsm: modem@1 { + reg = <1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + adsp_smsm: adsp@2 { + reg = <2>; + interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@7 { + reg = <7>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <1>; @@ -845,12 +917,96 @@ #interrupt-cells = <4>; }; + bam_dmux_dma: dma-controller@fc834000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xfc834000 0x7000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + }; + + modem: remoteproc@fc880000 { + compatible = "qcom,msm8226-mss-pil"; + reg = <0xfc880000 0x4040>, + <0xfc820000 0x10000>; + reg-names = "qdsp6", + "rmb"; + + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "bus", + "mem", + "xo"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + power-domains = <&rpmpd MSM8226_VDDCX>; + power-domain-names = "cx"; + + qcom,ext-bhs-reg = <&tcsr_regs_1 0x194>; + qcom,halt-regs = <&tcsr_regs_1 0x180 0x200 0x280>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + memory-region = <&mba_region>, <&mpss_region>; + + status = "disabled"; + + bam_dmux: bam-dmux { + compatible = "qcom,bam-dmux"; + + interrupt-parent = <&modem_smsm>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pc", "pc-ack"; + + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; + qcom,smem-state-names = "pc", "pc-ack"; + + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; + dma-names = "tx", "rx"; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs 12>; + qcom,smd-edge = <0>; + + label = "modem"; + }; + }; + tcsr_mutex: hwlock@fd484000 { compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex"; reg = <0xfd484000 0x1000>; #hwlock-cells = <1>; }; + tcsr_regs_1: syscon@fd485000 { + compatible = "qcom,tcsr-msm8226", "syscon"; + reg = <0xfd485000 0x1000>; + }; + tlmm: pinctrl@fd510000 { compatible = "qcom,msm8226-pinctrl"; reg = <0xfd510000 0x4000>; @@ -983,8 +1139,8 @@ <&gcc GPLL0_VOTE>, <&gcc GPLL1_VOTE>, <&rpmcc RPM_SMD_GFX3D_CLK_SRC>, - <&mdss_dsi0_phy 1>, - <&mdss_dsi0_phy 0>; + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>; clock-names = "xo", "mmss_gpll0_vote", "gpll0_vote", @@ -1060,8 +1216,8 @@ assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi0_phy 0>, - <&mdss_dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_AHB_CLK>, |