diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom/qcom-msm8960.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 101 |
1 files changed, 98 insertions, 3 deletions
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi index 865fe7cc3951..4babd0bbe5d6 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi @@ -52,6 +52,48 @@ reg = <0x80000000 0>; }; + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 0>; + + trips { + cpu_alert0: trip0 { + temperature = <60000>; + hysteresis = <10000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <95000>; + hysteresis = <10000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 1>; + + trips { + cpu_alert1: trip0 { + temperature = <60000>; + hysteresis = <10000>; + type = "passive"; + }; + + cpu_crit1: trip1 { + temperature = <95000>; + hysteresis = <10000>; + type = "critical"; + }; + }; + }; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = <GIC_PPI 10 0x304>; @@ -112,9 +154,26 @@ <GIC_PPI 3 0x301>; reg = <0x0200a000 0x100>; clock-frequency = <27000000>; + clocks = <&sleep_clk>; + clock-names = "sleep"; cpu-offset = <0x80000>; }; + qfprom: efuse@700000 { + compatible = "qcom,msm8960-qfprom", "qcom,qfprom"; + reg = <0x00700000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_calib: calib@404 { + reg = <0x404 0x10>; + }; + + tsens_backup: backup-calib@414 { + reg = <0x414 0x10>; + }; + }; + msmgpio: pinctrl@800000 { compatible = "qcom,msm8960-pinctrl"; gpio-controller; @@ -127,7 +186,7 @@ }; gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8960"; + compatible = "qcom,gcc-msm8960", "syscon"; #clock-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; @@ -135,6 +194,18 @@ <&pxo_board>, <&lcc PLL4>; clock-names = "cxo", "pxo", "pll4"; + + tsens: thermal-sensor { + compatible = "qcom,msm8960-tsens"; + + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + + #qcom,sensors = <5>; + #thermal-sensor-cells = <1>; + }; }; lcc: clock-controller@28000000 { @@ -279,7 +350,7 @@ compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; - reg = <0x12180000 0x8000>; + reg = <0x12180000 0x2000>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; clock-names = "mclk", "apb_pclk"; @@ -289,13 +360,25 @@ max-frequency = <192000000>; no-1-8-v; vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc3bam: dma-controller@12182000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x4000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC3_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; }; sdcc1: mmc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - reg = <0x12400000 0x8000>; + reg = <0x12400000 0x2000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; clock-names = "mclk", "apb_pclk"; @@ -305,6 +388,18 @@ cap-sd-highspeed; cap-mmc-highspeed; vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc1bam: dma-controller@12402000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; }; tcsr: syscon@1a400000 { |