diff options
Diffstat (limited to 'drivers/gpu/drm/display/drm_dp_helper.c')
| -rw-r--r-- | drivers/gpu/drm/display/drm_dp_helper.c | 586 |
1 files changed, 368 insertions, 218 deletions
diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c index 61c7c2c588c6..f2a6559a2710 100644 --- a/drivers/gpu/drm/display/drm_dp_helper.c +++ b/drivers/gpu/drm/display/drm_dp_helper.c @@ -327,7 +327,7 @@ static int __read_delay(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SI if (offset < DP_RECEIVER_CAP_SIZE) { rd_interval = dpcd[offset]; } else { - if (drm_dp_dpcd_readb(aux, offset, &rd_interval) != 1) { + if (drm_dp_dpcd_read_byte(aux, offset, &rd_interval) < 0) { drm_dbg_kms(aux->drm_dev, "%s: failed rd interval read\n", aux->name); /* arbitrary default delay */ @@ -358,7 +358,7 @@ int drm_dp_128b132b_read_aux_rd_interval(struct drm_dp_aux *aux) int unit; u8 val; - if (drm_dp_dpcd_readb(aux, DP_128B132B_TRAINING_AUX_RD_INTERVAL, &val) != 1) { + if (drm_dp_dpcd_read_byte(aux, DP_128B132B_TRAINING_AUX_RD_INTERVAL, &val) < 0) { drm_err(aux->drm_dev, "%s: failed rd interval read\n", aux->name); /* default to max */ @@ -459,6 +459,64 @@ void drm_dp_lttpr_link_train_channel_eq_delay(const struct drm_dp_aux *aux, } EXPORT_SYMBOL(drm_dp_lttpr_link_train_channel_eq_delay); +/** + * drm_dp_lttpr_wake_timeout_setup() - Grant extended time for sink to wake up + * @aux: The DP AUX channel to use + * @transparent_mode: This is true if lttpr is in transparent mode + * + * This function checks if the sink needs any extended wake time, if it does + * it grants this request. Post this setup the source device can keep trying + * the Aux transaction till the granted wake timeout. + * If this function is not called all Aux transactions are expected to take + * a default of 1ms before they throw an error. + */ +void drm_dp_lttpr_wake_timeout_setup(struct drm_dp_aux *aux, bool transparent_mode) +{ + u8 val = 1; + int ret; + + if (transparent_mode) { + static const u8 timeout_mapping[] = { + [DP_DPRX_SLEEP_WAKE_TIMEOUT_PERIOD_1_MS] = 1, + [DP_DPRX_SLEEP_WAKE_TIMEOUT_PERIOD_20_MS] = 20, + [DP_DPRX_SLEEP_WAKE_TIMEOUT_PERIOD_40_MS] = 40, + [DP_DPRX_SLEEP_WAKE_TIMEOUT_PERIOD_60_MS] = 60, + [DP_DPRX_SLEEP_WAKE_TIMEOUT_PERIOD_80_MS] = 80, + [DP_DPRX_SLEEP_WAKE_TIMEOUT_PERIOD_100_MS] = 100, + }; + + ret = drm_dp_dpcd_readb(aux, DP_EXTENDED_DPRX_SLEEP_WAKE_TIMEOUT_REQUEST, &val); + if (ret != 1) { + drm_dbg_kms(aux->drm_dev, + "Failed to read Extended sleep wake timeout request\n"); + return; + } + + val = (val < sizeof(timeout_mapping) && timeout_mapping[val]) ? + timeout_mapping[val] : 1; + + if (val > 1) + drm_dp_dpcd_writeb(aux, + DP_EXTENDED_DPRX_SLEEP_WAKE_TIMEOUT_GRANT, + DP_DPRX_SLEEP_WAKE_TIMEOUT_PERIOD_GRANTED); + } else { + ret = drm_dp_dpcd_readb(aux, DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT, &val); + if (ret != 1) { + drm_dbg_kms(aux->drm_dev, + "Failed to read Extended sleep wake timeout request\n"); + return; + } + + val = (val & DP_EXTENDED_WAKE_TIMEOUT_REQUEST_MASK) ? + (val & DP_EXTENDED_WAKE_TIMEOUT_REQUEST_MASK) * 10 : 1; + + if (val > 1) + drm_dp_dpcd_writeb(aux, DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT, + DP_EXTENDED_WAKE_TIMEOUT_GRANT); + } +} +EXPORT_SYMBOL(drm_dp_lttpr_wake_timeout_setup); + u8 drm_dp_link_rate_to_bw_code(int link_rate) { switch (link_rate) { @@ -646,6 +704,8 @@ EXPORT_SYMBOL(drm_dp_dpcd_set_powered); * function returns -EPROTO. Errors from the underlying AUX channel transfer * function, with the exception of -EBUSY (which causes the transaction to * be retried), are propagated to the caller. + * + * In most of the cases you want to use drm_dp_dpcd_read_data() instead. */ ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset, void *buffer, size_t size) @@ -694,6 +754,8 @@ EXPORT_SYMBOL(drm_dp_dpcd_read); * function returns -EPROTO. Errors from the underlying AUX channel transfer * function, with the exception of -EBUSY (which causes the transaction to * be retried), are propagated to the caller. + * + * In most of the cases you want to use drm_dp_dpcd_write_data() instead. */ ssize_t drm_dp_dpcd_write(struct drm_dp_aux *aux, unsigned int offset, void *buffer, size_t size) @@ -716,14 +778,13 @@ EXPORT_SYMBOL(drm_dp_dpcd_write); * @aux: DisplayPort AUX channel * @status: buffer to store the link status in (must be at least 6 bytes) * - * Returns the number of bytes transferred on success or a negative error - * code on failure. + * Returns a negative error code on failure or 0 on success. */ int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux, u8 status[DP_LINK_STATUS_SIZE]) { - return drm_dp_dpcd_read(aux, DP_LANE0_1_STATUS, status, - DP_LINK_STATUS_SIZE); + return drm_dp_dpcd_read_data(aux, DP_LANE0_1_STATUS, status, + DP_LINK_STATUS_SIZE); } EXPORT_SYMBOL(drm_dp_dpcd_read_link_status); @@ -746,30 +807,20 @@ int drm_dp_dpcd_read_phy_link_status(struct drm_dp_aux *aux, { int ret; - if (dp_phy == DP_PHY_DPRX) { - ret = drm_dp_dpcd_read(aux, - DP_LANE0_1_STATUS, - link_status, - DP_LINK_STATUS_SIZE); - - if (ret < 0) - return ret; - - WARN_ON(ret != DP_LINK_STATUS_SIZE); + if (dp_phy == DP_PHY_DPRX) + return drm_dp_dpcd_read_data(aux, + DP_LANE0_1_STATUS, + link_status, + DP_LINK_STATUS_SIZE); - return 0; - } - - ret = drm_dp_dpcd_read(aux, - DP_LANE0_1_STATUS_PHY_REPEATER(dp_phy), - link_status, - DP_LINK_STATUS_SIZE - 1); + ret = drm_dp_dpcd_read_data(aux, + DP_LANE0_1_STATUS_PHY_REPEATER(dp_phy), + link_status, + DP_LINK_STATUS_SIZE - 1); if (ret < 0) return ret; - WARN_ON(ret != DP_LINK_STATUS_SIZE - 1); - /* Convert the LTTPR to the sink PHY link status layout */ memmove(&link_status[DP_SINK_STATUS - DP_LANE0_1_STATUS + 1], &link_status[DP_SINK_STATUS - DP_LANE0_1_STATUS], @@ -780,12 +831,81 @@ int drm_dp_dpcd_read_phy_link_status(struct drm_dp_aux *aux, } EXPORT_SYMBOL(drm_dp_dpcd_read_phy_link_status); +/** + * drm_dp_link_power_up() - power up a DisplayPort link + * @aux: DisplayPort AUX channel + * @revision: DPCD revision supported on the link + * + * Returns 0 on success or a negative error code on failure. + */ +int drm_dp_link_power_up(struct drm_dp_aux *aux, unsigned char revision) +{ + u8 value; + int err; + + /* DP_SET_POWER register is only available on DPCD v1.1 and later */ + if (revision < DP_DPCD_REV_11) + return 0; + + err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value); + if (err < 0) + return err; + + value &= ~DP_SET_POWER_MASK; + value |= DP_SET_POWER_D0; + + err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value); + if (err < 0) + return err; + + /* + * According to the DP 1.1 specification, a "Sink Device must exit the + * power saving state within 1 ms" (Section 2.5.3.1, Table 5-52, "Sink + * Control Field" (register 0x600). + */ + usleep_range(1000, 2000); + + return 0; +} +EXPORT_SYMBOL(drm_dp_link_power_up); + +/** + * drm_dp_link_power_down() - power down a DisplayPort link + * @aux: DisplayPort AUX channel + * @revision: DPCD revision supported on the link + * + * Returns 0 on success or a negative error code on failure. + */ +int drm_dp_link_power_down(struct drm_dp_aux *aux, unsigned char revision) +{ + u8 value; + int err; + + /* DP_SET_POWER register is only available on DPCD v1.1 and later */ + if (revision < DP_DPCD_REV_11) + return 0; + + err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value); + if (err < 0) + return err; + + value &= ~DP_SET_POWER_MASK; + value |= DP_SET_POWER_D3; + + err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(drm_dp_link_power_down); + static int read_payload_update_status(struct drm_dp_aux *aux) { int ret; u8 status; - ret = drm_dp_dpcd_readb(aux, DP_PAYLOAD_TABLE_UPDATE_STATUS, &status); + ret = drm_dp_dpcd_read_byte(aux, DP_PAYLOAD_TABLE_UPDATE_STATUS, &status); if (ret < 0) return ret; @@ -812,21 +932,21 @@ int drm_dp_dpcd_write_payload(struct drm_dp_aux *aux, int ret; int retries = 0; - drm_dp_dpcd_writeb(aux, DP_PAYLOAD_TABLE_UPDATE_STATUS, - DP_PAYLOAD_TABLE_UPDATED); + drm_dp_dpcd_write_byte(aux, DP_PAYLOAD_TABLE_UPDATE_STATUS, + DP_PAYLOAD_TABLE_UPDATED); payload_alloc[0] = vcpid; payload_alloc[1] = start_time_slot; payload_alloc[2] = time_slot_count; - ret = drm_dp_dpcd_write(aux, DP_PAYLOAD_ALLOCATE_SET, payload_alloc, 3); - if (ret != 3) { + ret = drm_dp_dpcd_write_data(aux, DP_PAYLOAD_ALLOCATE_SET, payload_alloc, 3); + if (ret < 0) { drm_dbg_kms(aux->drm_dev, "failed to write payload allocation %d\n", ret); goto fail; } retry: - ret = drm_dp_dpcd_readb(aux, DP_PAYLOAD_TABLE_UPDATE_STATUS, &status); + ret = drm_dp_dpcd_read_byte(aux, DP_PAYLOAD_TABLE_UPDATE_STATUS, &status); if (ret < 0) { drm_dbg_kms(aux->drm_dev, "failed to read payload table status %d\n", ret); goto fail; @@ -982,15 +1102,15 @@ bool drm_dp_send_real_edid_checksum(struct drm_dp_aux *aux, { u8 link_edid_read = 0, auto_test_req = 0, test_resp = 0; - if (drm_dp_dpcd_read(aux, DP_DEVICE_SERVICE_IRQ_VECTOR, - &auto_test_req, 1) < 1) { + if (drm_dp_dpcd_read_byte(aux, DP_DEVICE_SERVICE_IRQ_VECTOR, + &auto_test_req) < 0) { drm_err(aux->drm_dev, "%s: DPCD failed read at register 0x%x\n", aux->name, DP_DEVICE_SERVICE_IRQ_VECTOR); return false; } auto_test_req &= DP_AUTOMATED_TEST_REQUEST; - if (drm_dp_dpcd_read(aux, DP_TEST_REQUEST, &link_edid_read, 1) < 1) { + if (drm_dp_dpcd_read_byte(aux, DP_TEST_REQUEST, &link_edid_read) < 0) { drm_err(aux->drm_dev, "%s: DPCD failed read at register 0x%x\n", aux->name, DP_TEST_REQUEST); return false; @@ -1003,23 +1123,23 @@ bool drm_dp_send_real_edid_checksum(struct drm_dp_aux *aux, return false; } - if (drm_dp_dpcd_write(aux, DP_DEVICE_SERVICE_IRQ_VECTOR, - &auto_test_req, 1) < 1) { + if (drm_dp_dpcd_write_byte(aux, DP_DEVICE_SERVICE_IRQ_VECTOR, + auto_test_req) < 0) { drm_err(aux->drm_dev, "%s: DPCD failed write at register 0x%x\n", aux->name, DP_DEVICE_SERVICE_IRQ_VECTOR); return false; } /* send back checksum for the last edid extension block data */ - if (drm_dp_dpcd_write(aux, DP_TEST_EDID_CHECKSUM, - &real_edid_checksum, 1) < 1) { + if (drm_dp_dpcd_write_byte(aux, DP_TEST_EDID_CHECKSUM, + real_edid_checksum) < 0) { drm_err(aux->drm_dev, "%s: DPCD failed write at register 0x%x\n", aux->name, DP_TEST_EDID_CHECKSUM); return false; } test_resp |= DP_TEST_EDID_CHECKSUM_WRITE; - if (drm_dp_dpcd_write(aux, DP_TEST_RESPONSE, &test_resp, 1) < 1) { + if (drm_dp_dpcd_write_byte(aux, DP_TEST_RESPONSE, test_resp) < 0) { drm_err(aux->drm_dev, "%s: DPCD failed write at register 0x%x\n", aux->name, DP_TEST_RESPONSE); return false; @@ -1056,12 +1176,10 @@ static int drm_dp_read_extended_dpcd_caps(struct drm_dp_aux *aux, DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT)) return 0; - ret = drm_dp_dpcd_read(aux, DP_DP13_DPCD_REV, &dpcd_ext, - sizeof(dpcd_ext)); + ret = drm_dp_dpcd_read_data(aux, DP_DP13_DPCD_REV, &dpcd_ext, + sizeof(dpcd_ext)); if (ret < 0) return ret; - if (ret != sizeof(dpcd_ext)) - return -EIO; if (dpcd[DP_DPCD_REV] > dpcd_ext[DP_DPCD_REV]) { drm_dbg_kms(aux->drm_dev, @@ -1098,10 +1216,10 @@ int drm_dp_read_dpcd_caps(struct drm_dp_aux *aux, { int ret; - ret = drm_dp_dpcd_read(aux, DP_DPCD_REV, dpcd, DP_RECEIVER_CAP_SIZE); + ret = drm_dp_dpcd_read_data(aux, DP_DPCD_REV, dpcd, DP_RECEIVER_CAP_SIZE); if (ret < 0) return ret; - if (ret != DP_RECEIVER_CAP_SIZE || dpcd[DP_DPCD_REV] == 0) + if (dpcd[DP_DPCD_REV] == 0) return -EIO; ret = drm_dp_read_extended_dpcd_caps(aux, dpcd); @@ -1151,11 +1269,9 @@ int drm_dp_read_downstream_info(struct drm_dp_aux *aux, if (dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DETAILED_CAP_INFO_AVAILABLE) len *= 4; - ret = drm_dp_dpcd_read(aux, DP_DOWNSTREAM_PORT_0, downstream_ports, len); + ret = drm_dp_dpcd_read_data(aux, DP_DOWNSTREAM_PORT_0, downstream_ports, len); if (ret < 0) return ret; - if (ret != len) - return -EIO; drm_dbg_kms(aux->drm_dev, "%s: DPCD DFP: %*ph\n", aux->name, len, downstream_ports); @@ -1512,7 +1628,7 @@ EXPORT_SYMBOL(drm_dp_downstream_mode); */ int drm_dp_downstream_id(struct drm_dp_aux *aux, char id[6]) { - return drm_dp_dpcd_read(aux, DP_BRANCH_ID, id, 6); + return drm_dp_dpcd_read_data(aux, DP_BRANCH_ID, id, 6); } EXPORT_SYMBOL(drm_dp_downstream_id); @@ -1577,13 +1693,13 @@ void drm_dp_downstream_debug(struct seq_file *m, drm_dp_downstream_id(aux, id); seq_printf(m, "\t\tID: %s\n", id); - len = drm_dp_dpcd_read(aux, DP_BRANCH_HW_REV, &rev[0], 1); - if (len > 0) + len = drm_dp_dpcd_read_data(aux, DP_BRANCH_HW_REV, &rev[0], 1); + if (!len) seq_printf(m, "\t\tHW: %d.%d\n", (rev[0] & 0xf0) >> 4, rev[0] & 0xf); - len = drm_dp_dpcd_read(aux, DP_BRANCH_SW_REV, rev, 2); - if (len > 0) + len = drm_dp_dpcd_read_data(aux, DP_BRANCH_SW_REV, rev, 2); + if (!len) seq_printf(m, "\t\tSW: %d.%d\n", rev[0], rev[1]); if (detailed_cap_info) { @@ -1721,11 +1837,9 @@ int drm_dp_read_sink_count(struct drm_dp_aux *aux) u8 count; int ret; - ret = drm_dp_dpcd_readb(aux, DP_SINK_COUNT, &count); + ret = drm_dp_dpcd_read_byte(aux, DP_SINK_COUNT, &count); if (ret < 0) return ret; - if (ret != 1) - return -EIO; return DP_GET_SINK_COUNT(count); } @@ -2023,14 +2137,17 @@ static int drm_dp_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, for (i = 0; i < num; i++) { msg.address = msgs[i].addr; - drm_dp_i2c_msg_set_request(&msg, &msgs[i]); - /* Send a bare address packet to start the transaction. - * Zero sized messages specify an address only (bare - * address) transaction. - */ - msg.buffer = NULL; - msg.size = 0; - err = drm_dp_i2c_do_msg(aux, &msg); + + if (!aux->no_zero_sized) { + drm_dp_i2c_msg_set_request(&msg, &msgs[i]); + /* Send a bare address packet to start the transaction. + * Zero sized messages specify an address only (bare + * address) transaction. + */ + msg.buffer = NULL; + msg.size = 0; + err = drm_dp_i2c_do_msg(aux, &msg); + } /* * Reset msg.request in case in case it got @@ -2049,6 +2166,8 @@ static int drm_dp_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, msg.buffer = msgs[i].buf + j; msg.size = min(transfer_size, msgs[i].len - j); + if (j + msg.size == msgs[i].len && aux->no_zero_sized) + msg.request &= ~DP_AUX_I2C_MOT; err = drm_dp_i2c_drain_msg(aux, &msg); /* @@ -2066,15 +2185,17 @@ static int drm_dp_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, } if (err >= 0) err = num; - /* Send a bare address packet to close out the transaction. - * Zero sized messages specify an address only (bare - * address) transaction. - */ - msg.request &= ~DP_AUX_I2C_MOT; - msg.buffer = NULL; - msg.size = 0; - (void)drm_dp_i2c_do_msg(aux, &msg); + if (!aux->no_zero_sized) { + /* Send a bare address packet to close out the transaction. + * Zero sized messages specify an address only (bare + * address) transaction. + */ + msg.request &= ~DP_AUX_I2C_MOT; + msg.buffer = NULL; + msg.size = 0; + (void)drm_dp_i2c_do_msg(aux, &msg); + } return err; } @@ -2114,13 +2235,13 @@ static int drm_dp_aux_get_crc(struct drm_dp_aux *aux, u8 *crc) u8 buf, count; int ret; - ret = drm_dp_dpcd_readb(aux, DP_TEST_SINK, &buf); + ret = drm_dp_dpcd_read_byte(aux, DP_TEST_SINK, &buf); if (ret < 0) return ret; WARN_ON(!(buf & DP_TEST_SINK_START)); - ret = drm_dp_dpcd_readb(aux, DP_TEST_SINK_MISC, &buf); + ret = drm_dp_dpcd_read_byte(aux, DP_TEST_SINK_MISC, &buf); if (ret < 0) return ret; @@ -2134,11 +2255,7 @@ static int drm_dp_aux_get_crc(struct drm_dp_aux *aux, u8 *crc) * At DP_TEST_CRC_R_CR, there's 6 bytes containing CRC data, 2 bytes * per component (RGB or CrYCb). */ - ret = drm_dp_dpcd_read(aux, DP_TEST_CRC_R_CR, crc, 6); - if (ret < 0) - return ret; - - return 0; + return drm_dp_dpcd_read_data(aux, DP_TEST_CRC_R_CR, crc, 6); } static void drm_dp_aux_crc_work(struct work_struct *work) @@ -2337,11 +2454,11 @@ int drm_dp_start_crc(struct drm_dp_aux *aux, struct drm_crtc *crtc) u8 buf; int ret; - ret = drm_dp_dpcd_readb(aux, DP_TEST_SINK, &buf); + ret = drm_dp_dpcd_read_byte(aux, DP_TEST_SINK, &buf); if (ret < 0) return ret; - ret = drm_dp_dpcd_writeb(aux, DP_TEST_SINK, buf | DP_TEST_SINK_START); + ret = drm_dp_dpcd_write_byte(aux, DP_TEST_SINK, buf | DP_TEST_SINK_START); if (ret < 0) return ret; @@ -2364,11 +2481,11 @@ int drm_dp_stop_crc(struct drm_dp_aux *aux) u8 buf; int ret; - ret = drm_dp_dpcd_readb(aux, DP_TEST_SINK, &buf); + ret = drm_dp_dpcd_read_byte(aux, DP_TEST_SINK, &buf); if (ret < 0) return ret; - ret = drm_dp_dpcd_writeb(aux, DP_TEST_SINK, buf & ~DP_TEST_SINK_START); + ret = drm_dp_dpcd_write_byte(aux, DP_TEST_SINK, buf & ~DP_TEST_SINK_START); if (ret < 0) return ret; @@ -2454,11 +2571,7 @@ drm_dp_get_quirks(const struct drm_dp_dpcd_ident *ident, bool is_branch) static int drm_dp_read_ident(struct drm_dp_aux *aux, unsigned int offset, struct drm_dp_dpcd_ident *ident) { - int ret; - - ret = drm_dp_dpcd_read(aux, offset, ident, sizeof(*ident)); - - return ret < 0 ? ret : 0; + return drm_dp_dpcd_read_data(aux, offset, ident, sizeof(*ident)); } static void drm_dp_dump_desc(struct drm_dp_aux *aux, @@ -2716,13 +2829,11 @@ static int drm_dp_read_lttpr_regs(struct drm_dp_aux *aux, int ret; for (offset = 0; offset < buf_size; offset += block_size) { - ret = drm_dp_dpcd_read(aux, - address + offset, - &buf[offset], block_size); + ret = drm_dp_dpcd_read_data(aux, + address + offset, + &buf[offset], block_size); if (ret < 0) return ret; - - WARN_ON(ret != block_size); } return 0; @@ -2818,6 +2929,67 @@ int drm_dp_lttpr_max_link_rate(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]) EXPORT_SYMBOL(drm_dp_lttpr_max_link_rate); /** + * drm_dp_lttpr_set_transparent_mode() - set the LTTPR in transparent mode + * @aux: DisplayPort AUX channel + * @enable: Enable or disable transparent mode + * + * Returns: 0 on success or a negative error code on failure. + */ +int drm_dp_lttpr_set_transparent_mode(struct drm_dp_aux *aux, bool enable) +{ + u8 val = enable ? DP_PHY_REPEATER_MODE_TRANSPARENT : + DP_PHY_REPEATER_MODE_NON_TRANSPARENT; + int ret = drm_dp_dpcd_writeb(aux, DP_PHY_REPEATER_MODE, val); + + if (ret < 0) + return ret; + + return (ret == 1) ? 0 : -EIO; +} +EXPORT_SYMBOL(drm_dp_lttpr_set_transparent_mode); + +/** + * drm_dp_lttpr_init() - init LTTPR transparency mode according to DP standard + * @aux: DisplayPort AUX channel + * @lttpr_count: Number of LTTPRs. Between 0 and 8, according to DP standard. + * Negative error code for any non-valid number. + * See drm_dp_lttpr_count(). + * + * Returns: 0 on success or a negative error code on failure. + */ +int drm_dp_lttpr_init(struct drm_dp_aux *aux, int lttpr_count) +{ + int ret; + + if (!lttpr_count) + return 0; + + /* + * See DP Standard v2.0 3.6.6.1 about the explicit disabling of + * non-transparent mode and the disable->enable non-transparent mode + * sequence. + */ + ret = drm_dp_lttpr_set_transparent_mode(aux, true); + if (ret) + return ret; + + if (lttpr_count < 0) + return -ENODEV; + + if (drm_dp_lttpr_set_transparent_mode(aux, false)) { + /* + * Roll-back to transparent mode if setting non-transparent + * mode has failed + */ + drm_dp_lttpr_set_transparent_mode(aux, true); + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL(drm_dp_lttpr_init); + +/** * drm_dp_lttpr_max_lane_count - get the maximum lane count supported by all LTTPRs * @caps: LTTPR common capabilities * @@ -2876,12 +3048,12 @@ int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux, int err; u8 rate, lanes; - err = drm_dp_dpcd_readb(aux, DP_TEST_LINK_RATE, &rate); + err = drm_dp_dpcd_read_byte(aux, DP_TEST_LINK_RATE, &rate); if (err < 0) return err; data->link_rate = drm_dp_bw_code_to_link_rate(rate); - err = drm_dp_dpcd_readb(aux, DP_TEST_LANE_COUNT, &lanes); + err = drm_dp_dpcd_read_byte(aux, DP_TEST_LANE_COUNT, &lanes); if (err < 0) return err; data->num_lanes = lanes & DP_MAX_LANE_COUNT_MASK; @@ -2889,22 +3061,22 @@ int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux, if (lanes & DP_ENHANCED_FRAME_CAP) data->enhanced_frame_cap = true; - err = drm_dp_dpcd_readb(aux, DP_PHY_TEST_PATTERN, &data->phy_pattern); + err = drm_dp_dpcd_read_byte(aux, DP_PHY_TEST_PATTERN, &data->phy_pattern); if (err < 0) return err; switch (data->phy_pattern) { case DP_PHY_TEST_PATTERN_80BIT_CUSTOM: - err = drm_dp_dpcd_read(aux, DP_TEST_80BIT_CUSTOM_PATTERN_7_0, - &data->custom80, sizeof(data->custom80)); + err = drm_dp_dpcd_read_data(aux, DP_TEST_80BIT_CUSTOM_PATTERN_7_0, + &data->custom80, sizeof(data->custom80)); if (err < 0) return err; break; case DP_PHY_TEST_PATTERN_CP2520: - err = drm_dp_dpcd_read(aux, DP_TEST_HBR2_SCRAMBLER_RESET, - &data->hbr2_reset, - sizeof(data->hbr2_reset)); + err = drm_dp_dpcd_read_data(aux, DP_TEST_HBR2_SCRAMBLER_RESET, + &data->hbr2_reset, + sizeof(data->hbr2_reset)); if (err < 0) return err; } @@ -2931,15 +3103,15 @@ int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux, if (dp_rev < 0x12) { test_pattern = (test_pattern << 2) & DP_LINK_QUAL_PATTERN_11_MASK; - err = drm_dp_dpcd_writeb(aux, DP_TRAINING_PATTERN_SET, - test_pattern); + err = drm_dp_dpcd_write_byte(aux, DP_TRAINING_PATTERN_SET, + test_pattern); if (err < 0) return err; } else { for (i = 0; i < data->num_lanes; i++) { - err = drm_dp_dpcd_writeb(aux, - DP_LINK_QUAL_LANE0_SET + i, - test_pattern); + err = drm_dp_dpcd_write_byte(aux, + DP_LINK_QUAL_LANE0_SET + i, + test_pattern); if (err < 0) return err; } @@ -3146,8 +3318,8 @@ bool drm_dp_as_sdp_supported(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_C if (dpcd[DP_DPCD_REV] < DP_DPCD_REV_13) return false; - if (drm_dp_dpcd_readb(aux, DP_DPRX_FEATURE_ENUMERATION_LIST_CONT_1, - &rx_feature) != 1) { + if (drm_dp_dpcd_read_byte(aux, DP_DPRX_FEATURE_ENUMERATION_LIST_CONT_1, + &rx_feature) < 0) { drm_dbg_dp(aux->drm_dev, "Failed to read DP_DPRX_FEATURE_ENUMERATION_LIST_CONT_1\n"); return false; @@ -3171,7 +3343,7 @@ bool drm_dp_vsc_sdp_supported(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_ if (dpcd[DP_DPCD_REV] < DP_DPCD_REV_13) return false; - if (drm_dp_dpcd_readb(aux, DP_DPRX_FEATURE_ENUMERATION_LIST, &rx_feature) != 1) { + if (drm_dp_dpcd_read_byte(aux, DP_DPRX_FEATURE_ENUMERATION_LIST, &rx_feature) < 0) { drm_dbg_dp(aux->drm_dev, "failed to read DP_DPRX_FEATURE_ENUMERATION_LIST\n"); return false; } @@ -3302,16 +3474,13 @@ EXPORT_SYMBOL(drm_dp_get_pcon_max_frl_bw); */ int drm_dp_pcon_frl_prepare(struct drm_dp_aux *aux, bool enable_frl_ready_hpd) { - int ret; u8 buf = DP_PCON_ENABLE_SOURCE_CTL_MODE | DP_PCON_ENABLE_LINK_FRL_MODE; if (enable_frl_ready_hpd) buf |= DP_PCON_ENABLE_HPD_READY; - ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); - - return ret; + return drm_dp_dpcd_write_byte(aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); } EXPORT_SYMBOL(drm_dp_pcon_frl_prepare); @@ -3326,7 +3495,7 @@ bool drm_dp_pcon_is_frl_ready(struct drm_dp_aux *aux) int ret; u8 buf; - ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_TX_LINK_STATUS, &buf); + ret = drm_dp_dpcd_read_byte(aux, DP_PCON_HDMI_TX_LINK_STATUS, &buf); if (ret < 0) return false; @@ -3355,7 +3524,7 @@ int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps, int ret; u8 buf; - ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_LINK_CONFIG_1, &buf); + ret = drm_dp_dpcd_read_byte(aux, DP_PCON_HDMI_LINK_CONFIG_1, &buf); if (ret < 0) return ret; @@ -3390,11 +3559,7 @@ int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps, return -EINVAL; } - ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); - if (ret < 0) - return ret; - - return 0; + return drm_dp_dpcd_write_byte(aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); } EXPORT_SYMBOL(drm_dp_pcon_frl_configure_1); @@ -3420,7 +3585,7 @@ int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask, else buf &= ~DP_PCON_FRL_LINK_TRAIN_EXTENDED; - ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_2, buf); + return drm_dp_dpcd_write_byte(aux, DP_PCON_HDMI_LINK_CONFIG_2, buf); if (ret < 0) return ret; @@ -3436,13 +3601,7 @@ EXPORT_SYMBOL(drm_dp_pcon_frl_configure_2); */ int drm_dp_pcon_reset_frl_config(struct drm_dp_aux *aux) { - int ret; - - ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_1, 0x0); - if (ret < 0) - return ret; - - return 0; + return drm_dp_dpcd_write_byte(aux, DP_PCON_HDMI_LINK_CONFIG_1, 0x0); } EXPORT_SYMBOL(drm_dp_pcon_reset_frl_config); @@ -3457,7 +3616,7 @@ int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux) int ret; u8 buf = 0; - ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_LINK_CONFIG_1, &buf); + ret = drm_dp_dpcd_read_byte(aux, DP_PCON_HDMI_LINK_CONFIG_1, &buf); if (ret < 0) return ret; if (!(buf & DP_PCON_ENABLE_SOURCE_CTL_MODE)) { @@ -3466,11 +3625,7 @@ int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux) return -EINVAL; } buf |= DP_PCON_ENABLE_HDMI_LINK; - ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); - if (ret < 0) - return ret; - - return 0; + return drm_dp_dpcd_write_byte(aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); } EXPORT_SYMBOL(drm_dp_pcon_frl_enable); @@ -3485,7 +3640,7 @@ bool drm_dp_pcon_hdmi_link_active(struct drm_dp_aux *aux) u8 buf; int ret; - ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_TX_LINK_STATUS, &buf); + ret = drm_dp_dpcd_read_byte(aux, DP_PCON_HDMI_TX_LINK_STATUS, &buf); if (ret < 0) return false; @@ -3510,7 +3665,7 @@ int drm_dp_pcon_hdmi_link_mode(struct drm_dp_aux *aux, u8 *frl_trained_mask) int mode; int ret; - ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_POST_FRL_STATUS, &buf); + ret = drm_dp_dpcd_read_byte(aux, DP_PCON_HDMI_POST_FRL_STATUS, &buf); if (ret < 0) return ret; @@ -3539,7 +3694,7 @@ void drm_dp_pcon_hdmi_frl_link_error_count(struct drm_dp_aux *aux, struct drm_hdmi_info *hdmi = &connector->display_info.hdmi; for (i = 0; i < hdmi->max_lanes; i++) { - if (drm_dp_dpcd_readb(aux, DP_PCON_HDMI_ERROR_STATUS_LN0 + i, &buf) < 0) + if (drm_dp_dpcd_read_byte(aux, DP_PCON_HDMI_ERROR_STATUS_LN0 + i, &buf) < 0) return; error_count = buf & DP_PCON_HDMI_ERROR_COUNT_MASK; @@ -3674,7 +3829,7 @@ int drm_dp_pcon_configure_dsc_enc(struct drm_dp_aux *aux, u8 pps_buf_config) u8 buf; int ret; - ret = drm_dp_dpcd_readb(aux, DP_PROTOCOL_CONVERTER_CONTROL_2, &buf); + ret = drm_dp_dpcd_read_byte(aux, DP_PROTOCOL_CONVERTER_CONTROL_2, &buf); if (ret < 0) return ret; @@ -3685,11 +3840,7 @@ int drm_dp_pcon_configure_dsc_enc(struct drm_dp_aux *aux, u8 pps_buf_config) buf |= pps_buf_config << 2; } - ret = drm_dp_dpcd_writeb(aux, DP_PROTOCOL_CONVERTER_CONTROL_2, buf); - if (ret < 0) - return ret; - - return 0; + return drm_dp_dpcd_write_byte(aux, DP_PROTOCOL_CONVERTER_CONTROL_2, buf); } /** @@ -3701,13 +3852,7 @@ int drm_dp_pcon_configure_dsc_enc(struct drm_dp_aux *aux, u8 pps_buf_config) */ int drm_dp_pcon_pps_default(struct drm_dp_aux *aux) { - int ret; - - ret = drm_dp_pcon_configure_dsc_enc(aux, DP_PCON_ENC_PPS_OVERRIDE_DISABLED); - if (ret < 0) - return ret; - - return 0; + return drm_dp_pcon_configure_dsc_enc(aux, DP_PCON_ENC_PPS_OVERRIDE_DISABLED); } EXPORT_SYMBOL(drm_dp_pcon_pps_default); @@ -3723,15 +3868,11 @@ int drm_dp_pcon_pps_override_buf(struct drm_dp_aux *aux, u8 pps_buf[128]) { int ret; - ret = drm_dp_dpcd_write(aux, DP_PCON_HDMI_PPS_OVERRIDE_BASE, &pps_buf, 128); + ret = drm_dp_dpcd_write_data(aux, DP_PCON_HDMI_PPS_OVERRIDE_BASE, &pps_buf, 128); if (ret < 0) return ret; - ret = drm_dp_pcon_configure_dsc_enc(aux, DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER); - if (ret < 0) - return ret; - - return 0; + return drm_dp_pcon_configure_dsc_enc(aux, DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER); } EXPORT_SYMBOL(drm_dp_pcon_pps_override_buf); @@ -3748,21 +3889,17 @@ int drm_dp_pcon_pps_override_param(struct drm_dp_aux *aux, u8 pps_param[6]) { int ret; - ret = drm_dp_dpcd_write(aux, DP_PCON_HDMI_PPS_OVRD_SLICE_HEIGHT, &pps_param[0], 2); + ret = drm_dp_dpcd_write_data(aux, DP_PCON_HDMI_PPS_OVRD_SLICE_HEIGHT, &pps_param[0], 2); if (ret < 0) return ret; - ret = drm_dp_dpcd_write(aux, DP_PCON_HDMI_PPS_OVRD_SLICE_WIDTH, &pps_param[2], 2); + ret = drm_dp_dpcd_write_data(aux, DP_PCON_HDMI_PPS_OVRD_SLICE_WIDTH, &pps_param[2], 2); if (ret < 0) return ret; - ret = drm_dp_dpcd_write(aux, DP_PCON_HDMI_PPS_OVRD_BPP, &pps_param[4], 2); + ret = drm_dp_dpcd_write_data(aux, DP_PCON_HDMI_PPS_OVRD_BPP, &pps_param[4], 2); if (ret < 0) return ret; - ret = drm_dp_pcon_configure_dsc_enc(aux, DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER); - if (ret < 0) - return ret; - - return 0; + return drm_dp_pcon_configure_dsc_enc(aux, DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER); } EXPORT_SYMBOL(drm_dp_pcon_pps_override_param); @@ -3778,7 +3915,7 @@ int drm_dp_pcon_convert_rgb_to_ycbcr(struct drm_dp_aux *aux, u8 color_spc) int ret; u8 buf; - ret = drm_dp_dpcd_readb(aux, DP_PROTOCOL_CONVERTER_CONTROL_2, &buf); + ret = drm_dp_dpcd_read_byte(aux, DP_PROTOCOL_CONVERTER_CONTROL_2, &buf); if (ret < 0) return ret; @@ -3787,11 +3924,7 @@ int drm_dp_pcon_convert_rgb_to_ycbcr(struct drm_dp_aux *aux, u8 color_spc) else buf &= ~DP_CONVERSION_RGB_YCBCR_MASK; - ret = drm_dp_dpcd_writeb(aux, DP_PROTOCOL_CONVERTER_CONTROL_2, buf); - if (ret < 0) - return ret; - - return 0; + return drm_dp_dpcd_write_byte(aux, DP_PROTOCOL_CONVERTER_CONTROL_2, buf); } EXPORT_SYMBOL(drm_dp_pcon_convert_rgb_to_ycbcr); @@ -3823,12 +3956,12 @@ int drm_edp_backlight_set_level(struct drm_dp_aux *aux, const struct drm_edp_bac buf[0] = level; } - ret = drm_dp_dpcd_write(aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, buf, sizeof(buf)); - if (ret != sizeof(buf)) { + ret = drm_dp_dpcd_write_data(aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, buf, sizeof(buf)); + if (ret < 0) { drm_err(aux->drm_dev, "%s: Failed to write aux backlight level: %d\n", aux->name, ret); - return ret < 0 ? ret : -EIO; + return ret; } return 0; @@ -3846,22 +3979,22 @@ drm_edp_backlight_set_enable(struct drm_dp_aux *aux, const struct drm_edp_backli if (!bl->aux_enable) return 0; - ret = drm_dp_dpcd_readb(aux, DP_EDP_DISPLAY_CONTROL_REGISTER, &buf); - if (ret != 1) { + ret = drm_dp_dpcd_read_byte(aux, DP_EDP_DISPLAY_CONTROL_REGISTER, &buf); + if (ret < 0) { drm_err(aux->drm_dev, "%s: Failed to read eDP display control register: %d\n", aux->name, ret); - return ret < 0 ? ret : -EIO; + return ret; } if (enable) buf |= DP_EDP_BACKLIGHT_ENABLE; else buf &= ~DP_EDP_BACKLIGHT_ENABLE; - ret = drm_dp_dpcd_writeb(aux, DP_EDP_DISPLAY_CONTROL_REGISTER, buf); - if (ret != 1) { + ret = drm_dp_dpcd_write_byte(aux, DP_EDP_DISPLAY_CONTROL_REGISTER, buf); + if (ret < 0) { drm_err(aux->drm_dev, "%s: Failed to write eDP display control register: %d\n", aux->name, ret); - return ret < 0 ? ret : -EIO; + return ret; } return 0; @@ -3897,15 +4030,16 @@ int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct drm_edp_backli dpcd_buf = DP_EDP_BACKLIGHT_CONTROL_MODE_PWM; if (bl->pwmgen_bit_count) { - ret = drm_dp_dpcd_writeb(aux, DP_EDP_PWMGEN_BIT_COUNT, bl->pwmgen_bit_count); - if (ret != 1) + ret = drm_dp_dpcd_write_byte(aux, DP_EDP_PWMGEN_BIT_COUNT, bl->pwmgen_bit_count); + if (ret < 0) drm_dbg_kms(aux->drm_dev, "%s: Failed to write aux pwmgen bit count: %d\n", aux->name, ret); } if (bl->pwm_freq_pre_divider) { - ret = drm_dp_dpcd_writeb(aux, DP_EDP_BACKLIGHT_FREQ_SET, bl->pwm_freq_pre_divider); - if (ret != 1) + ret = drm_dp_dpcd_write_byte(aux, DP_EDP_BACKLIGHT_FREQ_SET, + bl->pwm_freq_pre_divider); + if (ret < 0) drm_dbg_kms(aux->drm_dev, "%s: Failed to write aux backlight frequency: %d\n", aux->name, ret); @@ -3913,8 +4047,8 @@ int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct drm_edp_backli dpcd_buf |= DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE; } - ret = drm_dp_dpcd_writeb(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, dpcd_buf); - if (ret != 1) { + ret = drm_dp_dpcd_write_byte(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, dpcd_buf); + if (ret < 0) { drm_dbg_kms(aux->drm_dev, "%s: Failed to write aux backlight mode: %d\n", aux->name, ret); return ret < 0 ? ret : -EIO; @@ -3969,8 +4103,8 @@ drm_edp_backlight_probe_max(struct drm_dp_aux *aux, struct drm_edp_backlight_inf if (!bl->aux_set) return 0; - ret = drm_dp_dpcd_readb(aux, DP_EDP_PWMGEN_BIT_COUNT, &pn); - if (ret != 1) { + ret = drm_dp_dpcd_read_byte(aux, DP_EDP_PWMGEN_BIT_COUNT, &pn); + if (ret < 0) { drm_dbg_kms(aux->drm_dev, "%s: Failed to read pwmgen bit count cap: %d\n", aux->name, ret); return -ENODEV; @@ -4003,14 +4137,14 @@ drm_edp_backlight_probe_max(struct drm_dp_aux *aux, struct drm_edp_backlight_inf * - FxP is within 25% of desired value. * Note: 25% is arbitrary value and may need some tweak. */ - ret = drm_dp_dpcd_readb(aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min); - if (ret != 1) { + ret = drm_dp_dpcd_read_byte(aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min); + if (ret < 0) { drm_dbg_kms(aux->drm_dev, "%s: Failed to read pwmgen bit count cap min: %d\n", aux->name, ret); return 0; } - ret = drm_dp_dpcd_readb(aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max); - if (ret != 1) { + ret = drm_dp_dpcd_read_byte(aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max); + if (ret < 0) { drm_dbg_kms(aux->drm_dev, "%s: Failed to read pwmgen bit count cap max: %d\n", aux->name, ret); return 0; @@ -4035,8 +4169,8 @@ drm_edp_backlight_probe_max(struct drm_dp_aux *aux, struct drm_edp_backlight_inf break; } - ret = drm_dp_dpcd_writeb(aux, DP_EDP_PWMGEN_BIT_COUNT, pn); - if (ret != 1) { + ret = drm_dp_dpcd_write_byte(aux, DP_EDP_PWMGEN_BIT_COUNT, pn); + if (ret < 0) { drm_dbg_kms(aux->drm_dev, "%s: Failed to write aux pwmgen bit count: %d\n", aux->name, ret); return 0; @@ -4061,8 +4195,8 @@ drm_edp_backlight_probe_state(struct drm_dp_aux *aux, struct drm_edp_backlight_i u8 buf[2]; u8 mode_reg; - ret = drm_dp_dpcd_readb(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &mode_reg); - if (ret != 1) { + ret = drm_dp_dpcd_read_byte(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &mode_reg); + if (ret < 0) { drm_dbg_kms(aux->drm_dev, "%s: Failed to read backlight mode: %d\n", aux->name, ret); return ret < 0 ? ret : -EIO; @@ -4075,11 +4209,11 @@ drm_edp_backlight_probe_state(struct drm_dp_aux *aux, struct drm_edp_backlight_i if (*current_mode == DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD) { int size = 1 + bl->lsb_reg_used; - ret = drm_dp_dpcd_read(aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, buf, size); - if (ret != size) { + ret = drm_dp_dpcd_read_data(aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, buf, size); + if (ret < 0) { drm_dbg_kms(aux->drm_dev, "%s: Failed to read backlight level: %d\n", aux->name, ret); - return ret < 0 ? ret : -EIO; + return ret; } if (bl->lsb_reg_used) @@ -4224,8 +4358,8 @@ int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux) if (!panel || !panel->dev || !aux) return -EINVAL; - ret = drm_dp_dpcd_read(aux, DP_EDP_DPCD_REV, edp_dpcd, - EDP_DISPLAY_CTL_CAP_SIZE); + ret = drm_dp_dpcd_read_data(aux, DP_EDP_DPCD_REV, edp_dpcd, + EDP_DISPLAY_CTL_CAP_SIZE); if (ret < 0) return ret; @@ -4266,8 +4400,9 @@ EXPORT_SYMBOL(drm_panel_dp_aux_backlight); #endif /* See DP Standard v2.1 2.6.4.4.1.1, 2.8.4.4, 2.8.7 */ -static int drm_dp_link_symbol_cycles(int lane_count, int pixels, int bpp_x16, - int symbol_size, bool is_mst) +static int drm_dp_link_data_symbol_cycles(int lane_count, int pixels, + int bpp_x16, int symbol_size, + bool is_mst) { int cycles = DIV_ROUND_UP(pixels * bpp_x16, 16 * symbol_size * lane_count); int align = is_mst ? 4 / lane_count : 1; @@ -4275,22 +4410,42 @@ static int drm_dp_link_symbol_cycles(int lane_count, int pixels, int bpp_x16, return ALIGN(cycles, align); } -static int drm_dp_link_dsc_symbol_cycles(int lane_count, int pixels, int slice_count, - int bpp_x16, int symbol_size, bool is_mst) +/** + * drm_dp_link_symbol_cycles - calculate the link symbol count with/without dsc + * @lane_count: DP link lane count + * @pixels: number of pixels in a scanline + * @dsc_slice_count: number of slices for DSC or '0' for non-DSC + * @bpp_x16: bits per pixel in .4 binary fixed format + * @symbol_size: DP symbol size + * @is_mst: %true for MST and %false for SST + * + * Calculate the link symbol cycles for both DSC (@dsc_slice_count !=0) and + * non-DSC case (@dsc_slice_count == 0) and return the count. + */ +int drm_dp_link_symbol_cycles(int lane_count, int pixels, int dsc_slice_count, + int bpp_x16, int symbol_size, bool is_mst) { + int slice_count = dsc_slice_count ? : 1; int slice_pixels = DIV_ROUND_UP(pixels, slice_count); - int slice_data_cycles = drm_dp_link_symbol_cycles(lane_count, slice_pixels, - bpp_x16, symbol_size, is_mst); - int slice_eoc_cycles = is_mst ? 4 / lane_count : 1; + int slice_data_cycles = drm_dp_link_data_symbol_cycles(lane_count, + slice_pixels, + bpp_x16, + symbol_size, + is_mst); + int slice_eoc_cycles = 0; + + if (dsc_slice_count) + slice_eoc_cycles = is_mst ? 4 / lane_count : 1; return slice_count * (slice_data_cycles + slice_eoc_cycles); } +EXPORT_SYMBOL(drm_dp_link_symbol_cycles); /** * drm_dp_bw_overhead - Calculate the BW overhead of a DP link stream * @lane_count: DP link lane count * @hactive: pixel count of the active period in one scanline of the stream - * @dsc_slice_count: DSC slice count if @flags/DRM_DP_LINK_BW_OVERHEAD_DSC is set + * @dsc_slice_count: number of slices for DSC or '0' for non-DSC * @bpp_x16: bits per pixel in .4 binary fixed point * @flags: DRM_DP_OVERHEAD_x flags * @@ -4304,7 +4459,7 @@ static int drm_dp_link_dsc_symbol_cycles(int lane_count, int pixels, int slice_c * as well as the stream's * - @hactive timing * - @bpp_x16 color depth - * - compression mode (@flags / %DRM_DP_OVERHEAD_DSC). + * - compression mode (@dsc_slice_count != 0) * Note that this overhead doesn't account for the 8b/10b, 128b/132b * channel coding efficiency, for that see * @drm_dp_link_bw_channel_coding_efficiency(). @@ -4359,15 +4514,10 @@ int drm_dp_bw_overhead(int lane_count, int hactive, WARN_ON((flags & DRM_DP_BW_OVERHEAD_UHBR) && (flags & DRM_DP_BW_OVERHEAD_FEC)); - if (flags & DRM_DP_BW_OVERHEAD_DSC) - symbol_cycles = drm_dp_link_dsc_symbol_cycles(lane_count, hactive, - dsc_slice_count, - bpp_x16, symbol_size, - is_mst); - else - symbol_cycles = drm_dp_link_symbol_cycles(lane_count, hactive, - bpp_x16, symbol_size, - is_mst); + symbol_cycles = drm_dp_link_symbol_cycles(lane_count, hactive, + dsc_slice_count, + bpp_x16, symbol_size, + is_mst); return DIV_ROUND_UP_ULL(mul_u32_u32(symbol_cycles * symbol_size * lane_count, overhead * 16), |