diff options
Diffstat (limited to 'drivers/mmc/host/mtk-sd.c')
| -rw-r--r-- | drivers/mmc/host/mtk-sd.c | 219 |
1 files changed, 142 insertions, 77 deletions
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 345ea91629e0..31eb90536bce 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -5,6 +5,7 @@ */ #include <linux/module.h> +#include <linux/bitfield.h> #include <linux/bitops.h> #include <linux/clk.h> #include <linux/delay.h> @@ -83,6 +84,7 @@ #define EMMC51_CFG0 0x204 #define EMMC50_CFG0 0x208 #define EMMC50_CFG1 0x20c +#define EMMC50_CFG2 0x21c #define EMMC50_CFG3 0x220 #define SDC_FIFO_CFG 0x228 #define CQHCI_SETTING 0x7fc @@ -233,7 +235,9 @@ /* MSDC_PATCH_BIT mask */ #define MSDC_PATCH_BIT_ODDSUPP BIT(1) /* RW */ +#define MSDC_PATCH_BIT_DIS_WRMON BIT(2) /* RW */ #define MSDC_PATCH_BIT_RD_DAT_SEL BIT(3) /* RW */ +#define MSDC_PATCH_BIT_DESCUP_SEL BIT(6) /* RW */ #define MSDC_INT_DAT_LATCH_CK_SEL GENMASK(9, 7) #define MSDC_CKGEN_MSDC_DLY_SEL GENMASK(14, 10) #define MSDC_PATCH_BIT_IODSSEL BIT(16) /* RW */ @@ -246,10 +250,22 @@ #define MSDC_PATCH_BIT_SPCPUSH BIT(29) /* RW */ #define MSDC_PATCH_BIT_DECRCTMO BIT(30) /* RW */ -#define MSDC_PATCH_BIT1_CMDTA GENMASK(5, 3) /* RW */ +/* MSDC_PATCH_BIT1 mask */ +#define MSDC_PB1_WRDAT_CRC_TACNTR GENMASK(2, 0) /* RW */ +#define MSDC_PATCH_BIT1_CMDTA GENMASK(5, 3) /* RW */ #define MSDC_PB1_BUSY_CHECK_SEL BIT(7) /* RW */ #define MSDC_PATCH_BIT1_STOP_DLY GENMASK(11, 8) /* RW */ - +#define MSDC_PB1_DDR_CMD_FIX_SEL BIT(14) /* RW */ +#define MSDC_PB1_SINGLE_BURST BIT(16) /* RW */ +#define MSDC_PB1_RSVD20 GENMASK(18, 17) /* RW */ +#define MSDC_PB1_AUTO_SYNCST_CLR BIT(19) /* RW */ +#define MSDC_PB1_MARK_POP_WATER BIT(20) /* RW */ +#define MSDC_PB1_LP_DCM_EN BIT(21) /* RW */ +#define MSDC_PB1_RSVD3 BIT(22) /* RW */ +#define MSDC_PB1_AHB_GDMA_HCLK BIT(23) /* RW */ +#define MSDC_PB1_MSDC_CLK_ENFEAT GENMASK(31, 24) /* RW */ + +/* MSDC_PATCH_BIT2 mask */ #define MSDC_PATCH_BIT2_CFGRESP BIT(15) /* RW */ #define MSDC_PATCH_BIT2_CFGCRCSTS BIT(28) /* RW */ #define MSDC_PB2_SUPPORT_64G BIT(1) /* RW */ @@ -291,7 +307,10 @@ /* EMMC50_CFG1 mask */ #define EMMC50_CFG1_DS_CFG BIT(28) /* RW */ -#define EMMC50_CFG3_OUTS_WR GENMASK(4, 0) /* RW */ +/* EMMC50_CFG2 mask */ +#define EMMC50_CFG2_AXI_SET_LEN GENMASK(27, 24) /* RW */ + +#define EMMC50_CFG3_OUTS_WR GENMASK(4, 0) /* RW */ #define SDC_FIFO_CFG_WRVALIDSEL BIT(24) /* RW */ #define SDC_FIFO_CFG_RDVALIDSEL BIT(25) /* RW */ @@ -927,15 +946,15 @@ static int msdc_ungate_clock(struct msdc_host *host) static void msdc_new_tx_setting(struct msdc_host *host) { + u32 val; + if (!host->top_base) return; - sdr_set_bits(host->top_base + LOOP_TEST_CONTROL, - TEST_LOOP_DSCLK_MUX_SEL); - sdr_set_bits(host->top_base + LOOP_TEST_CONTROL, - TEST_LOOP_LATCH_MUX_SEL); - sdr_clr_bits(host->top_base + LOOP_TEST_CONTROL, - TEST_HS400_CMD_LOOP_MUX_SEL); + val = readl(host->top_base + LOOP_TEST_CONTROL); + val |= TEST_LOOP_DSCLK_MUX_SEL; + val |= TEST_LOOP_LATCH_MUX_SEL; + val &= ~TEST_HS400_CMD_LOOP_MUX_SEL; switch (host->timing) { case MMC_TIMING_LEGACY: @@ -945,19 +964,18 @@ static void msdc_new_tx_setting(struct msdc_host *host) case MMC_TIMING_UHS_SDR25: case MMC_TIMING_UHS_DDR50: case MMC_TIMING_MMC_DDR52: - sdr_clr_bits(host->top_base + LOOP_TEST_CONTROL, - LOOP_EN_SEL_CLK); + val &= ~LOOP_EN_SEL_CLK; break; case MMC_TIMING_UHS_SDR50: case MMC_TIMING_UHS_SDR104: case MMC_TIMING_MMC_HS200: case MMC_TIMING_MMC_HS400: - sdr_set_bits(host->top_base + LOOP_TEST_CONTROL, - LOOP_EN_SEL_CLK); + val |= LOOP_EN_SEL_CLK; break; default: break; } + writel(val, host->top_base + LOOP_TEST_CONTROL); } static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz) @@ -1816,7 +1834,7 @@ static irqreturn_t msdc_irq(int irq, void *dev_id) static void msdc_init_hw(struct msdc_host *host) { - u32 val; + u32 val, pb1_val, pb2_val; u32 tune_reg = host->dev_comp->pad_tune_reg; struct mmc_host *mmc = mmc_from_priv(host); @@ -1869,71 +1887,115 @@ static void msdc_init_hw(struct msdc_host *host) } writel(0, host->base + MSDC_IOCON); sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0); - writel(0x403c0046, host->base + MSDC_PATCH_BIT); - sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1); - writel(0xffff4089, host->base + MSDC_PATCH_BIT1); - sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL); + + /* + * Patch bit 0 and 1 are completely rewritten, but for patch bit 2 + * defaults are retained and, if necessary, only some bits are fixed + * up: read the PB2 register here for later usage in this function. + */ + pb2_val = readl(host->base + MSDC_PATCH_BIT2); + + /* Enable odd number support for 8-bit data bus */ + val = MSDC_PATCH_BIT_ODDSUPP; + + /* Disable SD command register write monitor */ + val |= MSDC_PATCH_BIT_DIS_WRMON; + + /* Issue transfer done interrupt after GPD update */ + val |= MSDC_PATCH_BIT_DESCUP_SEL; + + /* Extend R1B busy detection delay (in clock cycles) */ + val |= FIELD_PREP(MSDC_PATCH_BIT_BUSYDLY, 15); + + /* Enable CRC phase timeout during data write operation */ + val |= MSDC_PATCH_BIT_DECRCTMO; + + /* Set CKGEN delay to one stage */ + val |= FIELD_PREP(MSDC_CKGEN_MSDC_DLY_SEL, 1); + + /* First MSDC_PATCH_BIT setup is done: pull the trigger! */ + writel(val, host->base + MSDC_PATCH_BIT); + + /* Set wr data, crc status, cmd response turnaround period for UHS104 */ + pb1_val = FIELD_PREP(MSDC_PB1_WRDAT_CRC_TACNTR, 1); + pb1_val |= FIELD_PREP(MSDC_PATCH_BIT1_CMDTA, 1); + pb1_val |= MSDC_PB1_DDR_CMD_FIX_SEL; + + /* Support 'single' burst type only when AXI_LEN is 0 */ + sdr_get_field(host->base + EMMC50_CFG2, EMMC50_CFG2_AXI_SET_LEN, &val); + if (!val) + pb1_val |= MSDC_PB1_SINGLE_BURST; + + /* Set auto sync state clear, block gap stop clk */ + pb1_val |= MSDC_PB1_RSVD20 | MSDC_PB1_AUTO_SYNCST_CLR | MSDC_PB1_MARK_POP_WATER; + + /* Set low power DCM, use HCLK for GDMA, use MSDC CLK for everything else */ + pb1_val |= MSDC_PB1_LP_DCM_EN | MSDC_PB1_RSVD3 | + MSDC_PB1_AHB_GDMA_HCLK | MSDC_PB1_MSDC_CLK_ENFEAT; + + /* If needed, enable R1b command busy check at controller init time */ + if (!host->dev_comp->busy_check) + pb1_val |= MSDC_PB1_BUSY_CHECK_SEL; if (host->dev_comp->stop_clk_fix) { if (host->dev_comp->stop_dly_sel) - sdr_set_field(host->base + MSDC_PATCH_BIT1, - MSDC_PATCH_BIT1_STOP_DLY, - host->dev_comp->stop_dly_sel); + pb1_val |= FIELD_PREP(MSDC_PATCH_BIT1_STOP_DLY, + host->dev_comp->stop_dly_sel); - if (host->dev_comp->pop_en_cnt) - sdr_set_field(host->base + MSDC_PATCH_BIT2, - MSDC_PB2_POP_EN_CNT, - host->dev_comp->pop_en_cnt); + if (host->dev_comp->pop_en_cnt) { + pb2_val &= ~MSDC_PB2_POP_EN_CNT; + pb2_val |= FIELD_PREP(MSDC_PB2_POP_EN_CNT, + host->dev_comp->pop_en_cnt); + } - sdr_clr_bits(host->base + SDC_FIFO_CFG, - SDC_FIFO_CFG_WRVALIDSEL); - sdr_clr_bits(host->base + SDC_FIFO_CFG, - SDC_FIFO_CFG_RDVALIDSEL); + sdr_clr_bits(host->base + SDC_FIFO_CFG, SDC_FIFO_CFG_WRVALIDSEL); + sdr_clr_bits(host->base + SDC_FIFO_CFG, SDC_FIFO_CFG_RDVALIDSEL); } - if (host->dev_comp->busy_check) - sdr_clr_bits(host->base + MSDC_PATCH_BIT1, BIT(7)); - if (host->dev_comp->async_fifo) { - sdr_set_field(host->base + MSDC_PATCH_BIT2, - MSDC_PB2_RESPWAIT, 3); - if (host->dev_comp->enhance_rx) { - if (host->top_base) - sdr_set_bits(host->top_base + EMMC_TOP_CONTROL, - SDC_RX_ENH_EN); - else - sdr_set_bits(host->base + SDC_ADV_CFG0, - SDC_RX_ENHANCE_EN); + /* Set CMD response timeout multiplier to 65 + (16 * 3) cycles */ + pb2_val &= ~MSDC_PB2_RESPWAIT; + pb2_val |= FIELD_PREP(MSDC_PB2_RESPWAIT, 3); + + /* eMMC4.5: Select async FIFO path for CMD resp and CRC status */ + pb2_val &= ~MSDC_PATCH_BIT2_CFGRESP; + pb2_val |= MSDC_PATCH_BIT2_CFGCRCSTS; + + if (!host->dev_comp->enhance_rx) { + /* eMMC4.5: Delay 2T for CMD resp and CRC status EN signals */ + pb2_val &= ~(MSDC_PB2_RESPSTSENSEL | MSDC_PB2_CRCSTSENSEL); + pb2_val |= FIELD_PREP(MSDC_PB2_RESPSTSENSEL, 2); + pb2_val |= FIELD_PREP(MSDC_PB2_CRCSTSENSEL, 2); + } else if (host->top_base) { + sdr_set_bits(host->top_base + EMMC_TOP_CONTROL, SDC_RX_ENH_EN); } else { - sdr_set_field(host->base + MSDC_PATCH_BIT2, - MSDC_PB2_RESPSTSENSEL, 2); - sdr_set_field(host->base + MSDC_PATCH_BIT2, - MSDC_PB2_CRCSTSENSEL, 2); + sdr_set_bits(host->base + SDC_ADV_CFG0, SDC_RX_ENHANCE_EN); } - /* use async fifo, then no need tune internal delay */ - sdr_clr_bits(host->base + MSDC_PATCH_BIT2, - MSDC_PATCH_BIT2_CFGRESP); - sdr_set_bits(host->base + MSDC_PATCH_BIT2, - MSDC_PATCH_BIT2_CFGCRCSTS); } if (host->dev_comp->support_64g) - sdr_set_bits(host->base + MSDC_PATCH_BIT2, - MSDC_PB2_SUPPORT_64G); + pb2_val |= MSDC_PB2_SUPPORT_64G; + + /* Patch Bit 1/2 setup is done: pull the trigger! */ + writel(pb1_val, host->base + MSDC_PATCH_BIT1); + writel(pb2_val, host->base + MSDC_PATCH_BIT2); + sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL); + if (host->dev_comp->data_tune) { if (host->top_base) { - sdr_set_bits(host->top_base + EMMC_TOP_CONTROL, - PAD_DAT_RD_RXDLY_SEL); - sdr_clr_bits(host->top_base + EMMC_TOP_CONTROL, - DATA_K_VALUE_SEL); - sdr_set_bits(host->top_base + EMMC_TOP_CMD, - PAD_CMD_RD_RXDLY_SEL); + u32 top_ctl_val = readl(host->top_base + EMMC_TOP_CONTROL); + u32 top_cmd_val = readl(host->top_base + EMMC_TOP_CMD); + + top_cmd_val |= PAD_CMD_RD_RXDLY_SEL; + top_ctl_val |= PAD_DAT_RD_RXDLY_SEL; + top_ctl_val &= ~DATA_K_VALUE_SEL; if (host->tuning_step > PAD_DELAY_HALF) { - sdr_set_bits(host->top_base + EMMC_TOP_CONTROL, - PAD_DAT_RD_RXDLY2_SEL); - sdr_set_bits(host->top_base + EMMC_TOP_CMD, - PAD_CMD_RD_RXDLY2_SEL); + top_cmd_val |= PAD_CMD_RD_RXDLY2_SEL; + top_ctl_val |= PAD_DAT_RD_RXDLY2_SEL; } + + writel(top_ctl_val, host->top_base + EMMC_TOP_CONTROL); + writel(top_cmd_val, host->top_base + EMMC_TOP_CMD); } else { sdr_set_bits(host->base + tune_reg, MSDC_PAD_TUNE_RD_SEL | @@ -2143,15 +2205,17 @@ static inline void msdc_set_cmd_delay(struct msdc_host *host, u32 value) u32 tune_reg = host->dev_comp->pad_tune_reg; if (host->top_base) { + u32 regval = readl(host->top_base + EMMC_TOP_CMD); + + regval &= ~(PAD_CMD_RXDLY | PAD_CMD_RXDLY2); + if (value < PAD_DELAY_HALF) { - sdr_set_field(host->top_base + EMMC_TOP_CMD, PAD_CMD_RXDLY, value); - sdr_set_field(host->top_base + EMMC_TOP_CMD, PAD_CMD_RXDLY2, 0); + regval |= FIELD_PREP(PAD_CMD_RXDLY, value); } else { - sdr_set_field(host->top_base + EMMC_TOP_CMD, PAD_CMD_RXDLY, - PAD_DELAY_HALF - 1); - sdr_set_field(host->top_base + EMMC_TOP_CMD, PAD_CMD_RXDLY2, - value - PAD_DELAY_HALF); + regval |= FIELD_PREP(PAD_CMD_RXDLY, PAD_DELAY_HALF - 1); + regval |= FIELD_PREP(PAD_CMD_RXDLY2, value - PAD_DELAY_HALF); } + writel(regval, host->top_base + EMMC_TOP_CMD); } else { if (value < PAD_DELAY_HALF) { sdr_set_field(host->base + tune_reg, MSDC_PAD_TUNE_CMDRDLY, value); @@ -2171,17 +2235,18 @@ static inline void msdc_set_data_delay(struct msdc_host *host, u32 value) u32 tune_reg = host->dev_comp->pad_tune_reg; if (host->top_base) { + u32 regval = readl(host->top_base + EMMC_TOP_CONTROL); + + regval &= ~(PAD_DAT_RD_RXDLY | PAD_DAT_RD_RXDLY2); + if (value < PAD_DELAY_HALF) { - sdr_set_field(host->top_base + EMMC_TOP_CONTROL, - PAD_DAT_RD_RXDLY, value); - sdr_set_field(host->top_base + EMMC_TOP_CONTROL, - PAD_DAT_RD_RXDLY2, 0); + regval |= FIELD_PREP(PAD_DAT_RD_RXDLY, value); + regval |= FIELD_PREP(PAD_DAT_RD_RXDLY2, value); } else { - sdr_set_field(host->top_base + EMMC_TOP_CONTROL, - PAD_DAT_RD_RXDLY, PAD_DELAY_HALF - 1); - sdr_set_field(host->top_base + EMMC_TOP_CONTROL, - PAD_DAT_RD_RXDLY2, value - PAD_DELAY_HALF); + regval |= FIELD_PREP(PAD_DAT_RD_RXDLY, PAD_DELAY_HALF - 1); + regval |= FIELD_PREP(PAD_DAT_RD_RXDLY2, value - PAD_DELAY_HALF); } + writel(regval, host->top_base + EMMC_TOP_CONTROL); } else { if (value < PAD_DELAY_HALF) { sdr_set_field(host->base + tune_reg, MSDC_PAD_TUNE_DATRRDLY, value); @@ -2977,7 +3042,7 @@ static int msdc_drv_probe(struct platform_device *pdev) mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 4095); if (!(mmc->caps & MMC_CAP_NONREMOVABLE) && - !mmc_can_gpio_cd(mmc) && + !mmc_host_can_gpio_cd(mmc) && host->dev_comp->use_internal_cd) { /* * Is removable but no GPIO declared, so |