diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-esdhc-imx.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-esdhc-imx.c | 243 |
1 files changed, 198 insertions, 45 deletions
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index ff78a7c6a04c..ac187a8798b7 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -31,7 +31,9 @@ #include "cqhci.h" #define ESDHC_SYS_CTRL_DTOCV_MASK GENMASK(19, 16) +#define ESDHC_SYS_CTRL_RST_FIFO BIT(22) #define ESDHC_SYS_CTRL_IPP_RST_N BIT(23) +#define ESDHC_SYS_CTRL_RESET_TUNING BIT(28) #define ESDHC_CTRL_D3CD 0x08 #define ESDHC_BURST_LEN_EN_INCR (1 << 27) /* VENDOR SPEC register */ @@ -81,7 +83,11 @@ #define ESDHC_TUNE_CTRL_STEP 1 #define ESDHC_TUNE_CTRL_MIN 0 #define ESDHC_TUNE_CTRL_MAX ((1 << 7) - 1) - +#define ESDHC_TUNE_CTRL_STATUS_TAP_SEL_MASK GENMASK(30, 16) +#define ESDHC_TUNE_CTRL_STATUS_TAP_SEL_PRE_MASK GENMASK(30, 24) +#define ESDHC_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE_MASK GENMASK(14, 8) +#define ESDHC_TUNE_CTRL_STATUS_DLY_CELL_SET_OUT_MASK GENMASK(7, 4) +#define ESDHC_TUNE_CTRL_STATUS_DLY_CELL_SET_POST_MASK GENMASK(3, 0) /* strobe dll register */ #define ESDHC_STROBE_DLL_CTRL 0x70 #define ESDHC_STROBE_DLL_CTRL_ENABLE (1 << 0) @@ -104,6 +110,7 @@ #define ESDHC_TUNING_CTRL 0xcc #define ESDHC_STD_TUNING_EN (1 << 24) +#define ESDHC_TUNING_WINDOW_MASK GENMASK(22, 20) /* NOTE: the minimum valid tuning start tap for mx6sl is 1 */ #define ESDHC_TUNING_START_TAP_DEFAULT 0x1 #define ESDHC_TUNING_START_TAP_MASK 0x7f @@ -205,6 +212,8 @@ /* The IP does not have GPIO CD wake capabilities */ #define ESDHC_FLAG_SKIP_CD_WAKE BIT(18) +#define ESDHC_AUTO_TUNING_WINDOW 3 + enum wp_types { ESDHC_WP_NONE, /* no WP, neither controller nor gpio */ ESDHC_WP_CONTROLLER, /* mmc controller internal WP */ @@ -235,6 +244,8 @@ struct esdhc_platform_data { unsigned int tuning_step; /* The delay cell steps in tuning procedure */ unsigned int tuning_start_tap; /* The start delay cell point in tuning procedure */ unsigned int strobe_dll_delay_target; /* The delay cell for strobe pad (read clock) */ + unsigned int saved_tuning_delay_cell; /* save the value of tuning delay cell */ + unsigned int saved_auto_tuning_window; /* save the auto tuning window width */ }; struct esdhc_soc_data { @@ -264,35 +275,35 @@ static const struct esdhc_soc_data usdhc_imx6q_data = { }; static const struct esdhc_soc_data usdhc_imx6sl_data = { - .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_ERR004536 | ESDHC_FLAG_HS200 | ESDHC_FLAG_BROKEN_AUTO_CMD23, }; static const struct esdhc_soc_data usdhc_imx6sll_data = { - .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 | ESDHC_FLAG_HS400 | ESDHC_FLAG_STATE_LOST_IN_LPMODE, }; static const struct esdhc_soc_data usdhc_imx6sx_data = { - .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 | ESDHC_FLAG_STATE_LOST_IN_LPMODE | ESDHC_FLAG_BROKEN_AUTO_CMD23, }; static const struct esdhc_soc_data usdhc_imx6ull_data = { - .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 | ESDHC_FLAG_ERR010450 | ESDHC_FLAG_STATE_LOST_IN_LPMODE, }; static const struct esdhc_soc_data usdhc_imx7d_data = { - .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 | ESDHC_FLAG_HS400 | ESDHC_FLAG_STATE_LOST_IN_LPMODE @@ -308,7 +319,7 @@ static struct esdhc_soc_data usdhc_s32g2_data = { }; static struct esdhc_soc_data usdhc_imx7ulp_data = { - .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 | ESDHC_FLAG_PMQOS | ESDHC_FLAG_HS400 | ESDHC_FLAG_STATE_LOST_IN_LPMODE, @@ -321,7 +332,7 @@ static struct esdhc_soc_data usdhc_imxrt1050_data = { }; static struct esdhc_soc_data usdhc_imx8qxp_data = { - .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES | ESDHC_FLAG_STATE_LOST_IN_LPMODE @@ -330,7 +341,7 @@ static struct esdhc_soc_data usdhc_imx8qxp_data = { }; static struct esdhc_soc_data usdhc_imx8mm_data = { - .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES | ESDHC_FLAG_STATE_LOST_IN_LPMODE, @@ -870,6 +881,11 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg) esdhc_clrset_le(host, mask, new_val, reg); return; + case SDHCI_TIMEOUT_CONTROL: + esdhc_clrset_le(host, ESDHC_SYS_CTRL_DTOCV_MASK, + FIELD_PREP(ESDHC_SYS_CTRL_DTOCV_MASK, val), + ESDHC_SYSTEM_CONTROL); + return; case SDHCI_SOFTWARE_RESET: if (val & SDHCI_RESET_DATA) new_val = readl(host->ioaddr + SDHCI_HOST_CONTROL); @@ -1057,7 +1073,7 @@ static void esdhc_reset_tuning(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); - u32 ctrl; + u32 ctrl, tuning_ctrl, sys_ctrl; int ret; /* Reset the tuning circuit */ @@ -1071,6 +1087,21 @@ static void esdhc_reset_tuning(struct sdhci_host *host) writel(0, host->ioaddr + ESDHC_TUNE_CTRL_STATUS); } else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { writel(ctrl, host->ioaddr + ESDHC_MIX_CTRL); + /* + * enable the std tuning just in case it cleared in + * sdhc_esdhc_tuning_restore. + */ + tuning_ctrl = readl(host->ioaddr + ESDHC_TUNING_CTRL); + if (!(tuning_ctrl & ESDHC_STD_TUNING_EN)) { + tuning_ctrl |= ESDHC_STD_TUNING_EN; + writel(tuning_ctrl, host->ioaddr + ESDHC_TUNING_CTRL); + } + + /* set the reset tuning bit */ + sys_ctrl = readl(host->ioaddr + ESDHC_SYSTEM_CONTROL); + sys_ctrl |= ESDHC_SYS_CTRL_RESET_TUNING; + writel(sys_ctrl, host->ioaddr + ESDHC_SYSTEM_CONTROL); + ctrl = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS); ctrl &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; ctrl &= ~ESDHC_MIX_CTRL_EXE_TUNE; @@ -1130,7 +1161,7 @@ static int usdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val) { - u32 reg; + u32 reg, sys_ctrl; u8 sw_rst; int ret; @@ -1149,10 +1180,21 @@ static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val) reg |= ESDHC_MIX_CTRL_EXE_TUNE | ESDHC_MIX_CTRL_SMPCLK_SEL | ESDHC_MIX_CTRL_FBCLK_SEL; writel(reg, host->ioaddr + ESDHC_MIX_CTRL); - writel(val << 8, host->ioaddr + ESDHC_TUNE_CTRL_STATUS); + writel(FIELD_PREP(ESDHC_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE_MASK, val), + host->ioaddr + ESDHC_TUNE_CTRL_STATUS); dev_dbg(mmc_dev(host->mmc), "tuning with delay 0x%x ESDHC_TUNE_CTRL_STATUS 0x%x\n", val, readl(host->ioaddr + ESDHC_TUNE_CTRL_STATUS)); + + /* set RST_FIFO to reset the async FIFO, and wat it to self-clear */ + sys_ctrl = readl(host->ioaddr + ESDHC_SYSTEM_CONTROL); + sys_ctrl |= ESDHC_SYS_CTRL_RST_FIFO; + writel(sys_ctrl, host->ioaddr + ESDHC_SYSTEM_CONTROL); + ret = readl_poll_timeout(host->ioaddr + ESDHC_SYSTEM_CONTROL, sys_ctrl, + !(sys_ctrl & ESDHC_SYS_CTRL_RST_FIFO), 10, 100); + if (ret == -ETIMEDOUT) + dev_warn(mmc_dev(host->mmc), + "warning! RST_FIFO not clear in 100us\n"); } static void esdhc_post_tuning(struct sdhci_host *host) @@ -1172,9 +1214,10 @@ static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode) { int min, max, avg, ret; int win_length, target_min, target_max, target_win_length; + u32 clk_tune_ctrl_status, temp; - min = ESDHC_TUNE_CTRL_MIN; - max = ESDHC_TUNE_CTRL_MIN; + min = target_min = ESDHC_TUNE_CTRL_MIN; + max = target_max = ESDHC_TUNE_CTRL_MIN; target_win_length = 0; while (max < ESDHC_TUNE_CTRL_MAX) { /* find the mininum delay first which can pass tuning */ @@ -1211,6 +1254,30 @@ static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode) /* use average delay to get the best timing */ avg = (target_min + target_max) / 2; esdhc_prepare_tuning(host, avg); + + /* + * adjust the delay according to tuning window, make preparation + * for the auto-tuning logic. According to hardware suggest, need + * to config the auto tuning window width to 3, to make the auto + * tuning logic have enough space to handle the sample point shift + * caused by temperature change. + */ + clk_tune_ctrl_status = FIELD_PREP(ESDHC_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE_MASK, + avg - ESDHC_AUTO_TUNING_WINDOW) | + FIELD_PREP(ESDHC_TUNE_CTRL_STATUS_DLY_CELL_SET_OUT_MASK, + ESDHC_AUTO_TUNING_WINDOW) | + FIELD_PREP(ESDHC_TUNE_CTRL_STATUS_DLY_CELL_SET_POST_MASK, + ESDHC_AUTO_TUNING_WINDOW); + + writel(clk_tune_ctrl_status, host->ioaddr + ESDHC_TUNE_CTRL_STATUS); + ret = readl_poll_timeout(host->ioaddr + ESDHC_TUNE_CTRL_STATUS, temp, + clk_tune_ctrl_status == + FIELD_GET(ESDHC_TUNE_CTRL_STATUS_TAP_SEL_MASK, temp), + 1, 10); + if (ret == -ETIMEDOUT) + dev_warn(mmc_dev(host->mmc), + "clock tuning control status not set in 10us\n"); + ret = mmc_send_tuning(host->mmc, opcode, NULL); esdhc_post_tuning(host); @@ -1385,17 +1452,6 @@ static unsigned int esdhc_get_max_timeout_count(struct sdhci_host *host) return esdhc_is_usdhc(imx_data) ? 1 << 29 : 1 << 27; } -static void esdhc_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) -{ - struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); - struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); - - /* use maximum timeout counter */ - esdhc_clrset_le(host, ESDHC_SYS_CTRL_DTOCV_MASK, - esdhc_is_usdhc(imx_data) ? 0xF0000 : 0xE0000, - ESDHC_SYSTEM_CONTROL); -} - static u32 esdhc_cqhci_irq(struct sdhci_host *host, u32 intmask) { int cmd_error = 0; @@ -1432,7 +1488,6 @@ static struct sdhci_ops sdhci_esdhc_ops = { .get_min_clock = esdhc_pltfm_get_min_clock, .get_max_timeout_count = esdhc_get_max_timeout_count, .get_ro = esdhc_pltfm_get_ro, - .set_timeout = esdhc_set_timeout, .set_bus_width = esdhc_pltfm_set_bus_width, .set_uhs_signaling = esdhc_set_uhs_signaling, .reset = esdhc_reset, @@ -1529,6 +1584,16 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host) << ESDHC_TUNING_STEP_SHIFT; } + /* + * Config the tuning window to the hardware suggested value 3. + * This tuning window is used for auto tuning logic. The default + * tuning window is 2, here change to 3 make the window a bit + * wider, give auto tuning enough space to handle the sample + * point shift cause by temperature change. + */ + tmp &= ~ESDHC_TUNING_WINDOW_MASK; + tmp |= FIELD_PREP(ESDHC_TUNING_WINDOW_MASK, ESDHC_AUTO_TUNING_WINDOW); + /* Disable the CMD CRC check for tuning, if not, need to * add some delay after every tuning command, because * hardware standard tuning logic will directly go to next @@ -1569,6 +1634,63 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host) } } +#ifdef CONFIG_PM_SLEEP +static void sdhc_esdhc_tuning_save(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + u32 reg; + + /* + * SD/eMMC do not need this tuning save because it will re-init + * after system resume back. + * Here save the tuning delay value for SDIO device since it may + * keep power during system PM. And for usdhc, only SDR50 and + * SDR104 mode for SDIO device need to do tuning, and need to + * save/restore. + */ + if (host->timing == MMC_TIMING_UHS_SDR50 || + host->timing == MMC_TIMING_UHS_SDR104) { + reg = readl(host->ioaddr + ESDHC_TUNE_CTRL_STATUS); + reg = FIELD_GET(ESDHC_TUNE_CTRL_STATUS_TAP_SEL_PRE_MASK, reg); + imx_data->boarddata.saved_tuning_delay_cell = reg; + } +} + +static void sdhc_esdhc_tuning_restore(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + u32 reg; + + if (host->timing == MMC_TIMING_UHS_SDR50 || + host->timing == MMC_TIMING_UHS_SDR104) { + /* + * restore the tuning delay value actually is a + * manual tuning method, so clear the standard + * tuning enable bit here. Will set back this + * ESDHC_STD_TUNING_EN in esdhc_reset_tuning() + * when trigger re-tuning. + */ + reg = readl(host->ioaddr + ESDHC_TUNING_CTRL); + reg &= ~ESDHC_STD_TUNING_EN; + writel(reg, host->ioaddr + ESDHC_TUNING_CTRL); + + reg = readl(host->ioaddr + ESDHC_MIX_CTRL); + reg |= ESDHC_MIX_CTRL_SMPCLK_SEL | ESDHC_MIX_CTRL_FBCLK_SEL; + writel(reg, host->ioaddr + ESDHC_MIX_CTRL); + + writel(FIELD_PREP(ESDHC_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE_MASK, + imx_data->boarddata.saved_tuning_delay_cell) | + FIELD_PREP(ESDHC_TUNE_CTRL_STATUS_DLY_CELL_SET_OUT_MASK, + ESDHC_AUTO_TUNING_WINDOW) | + FIELD_PREP(ESDHC_TUNE_CTRL_STATUS_DLY_CELL_SET_POST_MASK, + ESDHC_AUTO_TUNING_WINDOW), + host->ioaddr + ESDHC_TUNE_CTRL_STATUS); + } +} +#endif + static void esdhc_cqe_enable(struct mmc_host *mmc) { struct sdhci_host *host = mmc_priv(mmc); @@ -1777,6 +1899,8 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) * to distinguish the card type. */ host->mmc_host_ops.init_card = usdhc_init_card; + + host->max_timeout_count = 0xF; } if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) @@ -1885,11 +2009,14 @@ static int sdhci_esdhc_suspend(struct device *dev) struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); int ret; - if (host->mmc->caps2 & MMC_CAP2_CQE) { - ret = cqhci_suspend(host->mmc); - if (ret) - return ret; - } + /* + * Switch to runtime resume for two reasons: + * 1, there is register access (e.g., wakeup control register), so + * need to make sure gate on ipg clock. + * 2, make sure the pm_runtime_force_resume() in sdhci_esdhc_resume() really + * invoke its ->runtime_resume callback (needs_force_resume = 1). + */ + pm_runtime_get_sync(dev); if ((imx_data->socdata->flags & ESDHC_FLAG_STATE_LOST_IN_LPMODE) && (host->tuning_mode != SDHCI_TUNING_MODE_1)) { @@ -1897,12 +2024,22 @@ static int sdhci_esdhc_suspend(struct device *dev) mmc_retune_needed(host->mmc); } - if (host->tuning_mode != SDHCI_TUNING_MODE_3) - mmc_retune_needed(host->mmc); - - ret = sdhci_suspend_host(host); - if (ret) - return ret; + /* + * For the device need to keep power during system PM, need + * to save the tuning delay value just in case the usdhc + * lost power during system PM. + */ + if (mmc_card_keep_power(host->mmc) && mmc_card_wake_sdio_irq(host->mmc) && + esdhc_is_usdhc(imx_data)) + sdhc_esdhc_tuning_save(host); + + if (device_may_wakeup(dev)) { + /* The irqs of imx are not shared. It is safe to disable */ + disable_irq(host->irq); + ret = sdhci_enable_irq_wakeups(host); + if (!ret) + dev_warn(dev, "Failed to enable irq wakeup\n"); + } ret = pinctrl_pm_select_sleep_state(dev); if (ret) @@ -1910,30 +2047,46 @@ static int sdhci_esdhc_suspend(struct device *dev) ret = mmc_gpio_set_cd_wake(host->mmc, true); + /* + * Make sure invoke runtime_suspend to gate off clock. + * uSDHC IP supports in-band SDIO wakeup even without clock. + */ + pm_runtime_force_suspend(dev); + return ret; } static int sdhci_esdhc_resume(struct device *dev) { struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); int ret; - ret = pinctrl_pm_select_default_state(dev); + pm_runtime_force_resume(dev); + + ret = mmc_gpio_set_cd_wake(host->mmc, false); if (ret) return ret; /* re-initialize hw state in case it's lost in low power mode */ sdhci_esdhc_imx_hwinit(host); - ret = sdhci_resume_host(host); - if (ret) - return ret; + if (host->irq_wake_enabled) { + sdhci_disable_irq_wakeups(host); + enable_irq(host->irq); + } - if (host->mmc->caps2 & MMC_CAP2_CQE) - ret = cqhci_resume(host->mmc); + /* + * restore the saved tuning delay value for the device which keep + * power during system PM. + */ + if (mmc_card_keep_power(host->mmc) && mmc_card_wake_sdio_irq(host->mmc) && + esdhc_is_usdhc(imx_data)) + sdhc_esdhc_tuning_restore(host); - if (!ret) - ret = mmc_gpio_set_cd_wake(host->mmc, false); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); return ret; } |