diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz_common.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_common.c | 139 |
1 files changed, 130 insertions, 9 deletions
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index f95a9aac56ee..7c142c17b3f6 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -2,7 +2,7 @@ /* * Microchip switch driver main logic * - * Copyright (C) 2017-2024 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #include <linux/delay.h> @@ -408,12 +408,29 @@ static void ksz9477_phylink_mac_link_up(struct phylink_config *config, int speed, int duplex, bool tx_pause, bool rx_pause); +static struct phylink_pcs * +ksz_phylink_mac_select_pcs(struct phylink_config *config, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; + struct ksz_port *p = &dev->ports[dp->index]; + + if (ksz_is_sgmii_port(dev, dp->index) && + (interface == PHY_INTERFACE_MODE_SGMII || + interface == PHY_INTERFACE_MODE_1000BASEX)) + return p->pcs; + + return NULL; +} + static const struct phylink_mac_ops ksz9477_phylink_mac_ops = { .mac_config = ksz_phylink_mac_config, .mac_link_down = ksz_phylink_mac_link_down, .mac_link_up = ksz9477_phylink_mac_link_up, .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, + .mac_select_pcs = ksz_phylink_mac_select_pcs, }; static const struct ksz_dev_ops ksz9477_dev_ops = { @@ -451,6 +468,7 @@ static const struct ksz_dev_ops ksz9477_dev_ops = { .reset = ksz9477_reset_switch, .init = ksz9477_switch_init, .exit = ksz9477_switch_exit, + .pcs_create = ksz9477_pcs_create, }; static const struct phylink_mac_ops lan937x_phylink_mac_ops = { @@ -1093,8 +1111,7 @@ static const struct regmap_range ksz9477_valid_regs[] = { regmap_reg_range(0x701b, 0x701b), regmap_reg_range(0x701f, 0x7020), regmap_reg_range(0x7030, 0x7030), - regmap_reg_range(0x7200, 0x7203), - regmap_reg_range(0x7206, 0x7207), + regmap_reg_range(0x7200, 0x7207), regmap_reg_range(0x7300, 0x7301), regmap_reg_range(0x7400, 0x7401), regmap_reg_range(0x7403, 0x7403), @@ -1610,6 +1627,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { true, false, false}, .gbit_capable = {true, true, true, true, true, true, true}, .ptp_capable = true, + .sgmii_port = 7, .wr_table = &ksz9477_register_set, .rd_table = &ksz9477_register_set, }, @@ -2002,6 +2020,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .internal_phy = {true, true, true, true, true, false, false}, .gbit_capable = {true, true, true, true, true, true, true}, + .sgmii_port = 7, .wr_table = &ksz9477_register_set, .rd_table = &ksz9477_register_set, }, @@ -2137,7 +2156,7 @@ void ksz_r_mib_stats64(struct ksz_device *dev, int port) spin_unlock(&mib->stats64_lock); - if (dev->info->phy_errata_9477) { + if (dev->info->phy_errata_9477 && !ksz_is_sgmii_port(dev, port)) { ret = ksz9477_errata_monitor(dev, port, raw->tx_late_col); if (ret) dev_err(dev->dev, "Failed to monitor transmission halt\n"); @@ -2767,8 +2786,9 @@ static int ksz_irq_common_setup(struct ksz_device *dev, struct ksz_irq *kirq) kirq->dev = dev; kirq->masked = ~0; - kirq->domain = irq_domain_add_simple(dev->dev->of_node, kirq->nirqs, 0, - &ksz_irq_domain_ops, kirq); + kirq->domain = irq_domain_create_simple(of_fwnode_handle(dev->dev->of_node), + kirq->nirqs, 0, + &ksz_irq_domain_ops, kirq); if (!kirq->domain) return -ENOMEM; @@ -2845,6 +2865,12 @@ static int ksz_setup(struct dsa_switch *ds) if (ret) return ret; + if (ksz_has_sgmii_port(dev) && dev->dev_ops->pcs_create) { + ret = dev->dev_ops->pcs_create(dev); + if (ret) + return ret; + } + /* set broadcast storm protection 10% rate */ regmap_update_bits(ksz_regmap_16(dev), regs[S_BROADCAST_CTRL], BROADCAST_STORM_RATE, @@ -3692,6 +3718,10 @@ static void ksz_phylink_mac_config(struct phylink_config *config, if (dev->info->internal_phy[port]) return; + /* No need to configure XMII control register when using SGMII. */ + if (ksz_is_sgmii_port(dev, port)) + return; + if (phylink_autoneg_inband(mode)) { dev_err(dev->dev, "In-band AN not supported!\n"); return; @@ -4078,6 +4108,89 @@ static int ksz_ets_band_to_queue(struct tc_ets_qopt_offload_replace_params *p, return p->bands - 1 - band; } +/** + * ksz88x3_tc_ets_add - Configure ETS (Enhanced Transmission Selection) + * for a port on KSZ88x3 switch + * @dev: Pointer to the KSZ switch device structure + * @port: Port number to configure + * @p: Pointer to offload replace parameters describing ETS bands and mapping + * + * The KSZ88x3 supports two scheduling modes: Strict Priority and + * Weighted Fair Queuing (WFQ). Both modes have fixed behavior: + * - No configurable queue-to-priority mapping + * - No weight adjustment in WFQ mode + * + * This function configures the switch to use strict priority mode by + * clearing the WFQ enable bit for all queues associated with ETS bands. + * If strict priority is not explicitly requested, the switch will default + * to WFQ mode. + * + * Return: 0 on success, or a negative error code on failure + */ +static int ksz88x3_tc_ets_add(struct ksz_device *dev, int port, + struct tc_ets_qopt_offload_replace_params *p) +{ + int ret, band; + + /* Only strict priority mode is supported for now. + * WFQ is implicitly enabled when strict mode is disabled. + */ + for (band = 0; band < p->bands; band++) { + int queue = ksz_ets_band_to_queue(p, band); + u8 reg; + + /* Calculate TXQ Split Control register address for this + * port/queue + */ + reg = KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue); + + /* Clear WFQ enable bit to select strict priority scheduling */ + ret = ksz_rmw8(dev, reg, KSZ8873_TXQ_WFQ_ENABLE, 0); + if (ret) + return ret; + } + + return 0; +} + +/** + * ksz88x3_tc_ets_del - Reset ETS (Enhanced Transmission Selection) config + * for a port on KSZ88x3 switch + * @dev: Pointer to the KSZ switch device structure + * @port: Port number to reset + * + * The KSZ88x3 supports only fixed scheduling modes: Strict Priority or + * Weighted Fair Queuing (WFQ), with no reconfiguration of weights or + * queue mapping. This function resets the port’s scheduling mode to + * the default, which is WFQ, by enabling the WFQ bit for all queues. + * + * Return: 0 on success, or a negative error code on failure + */ +static int ksz88x3_tc_ets_del(struct ksz_device *dev, int port) +{ + int ret, queue; + + /* Iterate over all transmit queues for this port */ + for (queue = 0; queue < dev->info->num_tx_queues; queue++) { + u8 reg; + + /* Calculate TXQ Split Control register address for this + * port/queue + */ + reg = KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue); + + /* Set WFQ enable bit to revert back to default scheduling + * mode + */ + ret = ksz_rmw8(dev, reg, KSZ8873_TXQ_WFQ_ENABLE, + KSZ8873_TXQ_WFQ_ENABLE); + if (ret) + return ret; + } + + return 0; +} + static int ksz_queue_set_strict(struct ksz_device *dev, int port, int queue) { int ret; @@ -4159,6 +4272,7 @@ static int ksz_tc_ets_del(struct ksz_device *dev, int port) for (queue = 0; queue < dev->info->num_tx_queues; queue++) { ret = ksz_queue_set_wrr(dev, port, queue, KSZ9477_DEFAULT_WRR_WEIGHT); + if (ret) return ret; } @@ -4211,7 +4325,7 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port, struct ksz_device *dev = ds->priv; int ret; - if (is_ksz8(dev)) + if (is_ksz8(dev) && !ksz_is_ksz88x3(dev)) return -EOPNOTSUPP; if (qopt->parent != TC_H_ROOT) { @@ -4225,9 +4339,16 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port, if (ret) return ret; - return ksz_tc_ets_add(dev, port, &qopt->replace_params); + if (ksz_is_ksz88x3(dev)) + return ksz88x3_tc_ets_add(dev, port, + &qopt->replace_params); + else + return ksz_tc_ets_add(dev, port, &qopt->replace_params); case TC_ETS_DESTROY: - return ksz_tc_ets_del(dev, port); + if (ksz_is_ksz88x3(dev)) + return ksz88x3_tc_ets_del(dev, port); + else + return ksz_tc_ets_del(dev, port); case TC_ETS_STATS: case TC_ETS_GRAFT: return -EOPNOTSUPP; |