diff options
Diffstat (limited to 'drivers/net/dsa/microchip')
| -rw-r--r-- | drivers/net/dsa/microchip/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/ksz9477.c | 194 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/ksz9477.h | 4 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_common.c | 139 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_common.h | 44 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_ptp.c | 30 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_ptp.h | 7 |
7 files changed, 386 insertions, 33 deletions
diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig index 12a86585a77f..c71d3fd5dfeb 100644 --- a/drivers/net/dsa/microchip/Kconfig +++ b/drivers/net/dsa/microchip/Kconfig @@ -6,6 +6,7 @@ menuconfig NET_DSA_MICROCHIP_KSZ_COMMON select NET_DSA_TAG_NONE select NET_IEEE8021Q_HELPERS select DCB + select PCS_XPCS help This driver adds support for Microchip KSZ8, KSZ9 and LAN937X series switch chips, being KSZ8863/8873, diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index 29fe79ea74cd..d747ea1c41a7 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -2,7 +2,7 @@ /* * Microchip KSZ9477 switch driver main logic * - * Copyright (C) 2017-2024 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #include <linux/kernel.h> @@ -161,6 +161,190 @@ static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev) 10, 1000); } +static void port_sgmii_s(struct ksz_device *dev, uint port, u16 devid, u16 reg) +{ + u32 data; + + data = (devid & MII_MMD_CTRL_DEVAD_MASK) << 16; + data |= reg; + ksz_pwrite32(dev, port, REG_PORT_SGMII_ADDR__4, data); +} + +static void port_sgmii_r(struct ksz_device *dev, uint port, u16 devid, u16 reg, + u16 *buf) +{ + port_sgmii_s(dev, port, devid, reg); + ksz_pread16(dev, port, REG_PORT_SGMII_DATA__4 + 2, buf); +} + +static void port_sgmii_w(struct ksz_device *dev, uint port, u16 devid, u16 reg, + u16 buf) +{ + port_sgmii_s(dev, port, devid, reg); + ksz_pwrite32(dev, port, REG_PORT_SGMII_DATA__4, buf); +} + +static int ksz9477_pcs_read(struct mii_bus *bus, int phy, int mmd, int reg) +{ + struct ksz_device *dev = bus->priv; + int port = ksz_get_sgmii_port(dev); + u16 val; + + port_sgmii_r(dev, port, mmd, reg, &val); + + /* Simulate a value to activate special code in the XPCS driver if + * supported. + */ + if (mmd == MDIO_MMD_PMAPMD) { + if (reg == MDIO_DEVID1) + val = 0x9477; + else if (reg == MDIO_DEVID2) + val = 0x22 << 10; + } else if (mmd == MDIO_MMD_VEND2) { + struct ksz_port *p = &dev->ports[port]; + + /* Need to update MII_BMCR register with the exact speed and + * duplex mode when running in SGMII mode and this register is + * used to detect connected speed in that mode. + */ + if (reg == MMD_SR_MII_AUTO_NEG_STATUS) { + int duplex, speed; + + if (val & SR_MII_STAT_LINK_UP) { + speed = (val >> SR_MII_STAT_S) & SR_MII_STAT_M; + if (speed == SR_MII_STAT_1000_MBPS) + speed = SPEED_1000; + else if (speed == SR_MII_STAT_100_MBPS) + speed = SPEED_100; + else + speed = SPEED_10; + + if (val & SR_MII_STAT_FULL_DUPLEX) + duplex = DUPLEX_FULL; + else + duplex = DUPLEX_HALF; + + if (!p->phydev.link || + p->phydev.speed != speed || + p->phydev.duplex != duplex) { + u16 ctrl; + + p->phydev.link = 1; + p->phydev.speed = speed; + p->phydev.duplex = duplex; + port_sgmii_r(dev, port, mmd, MII_BMCR, + &ctrl); + ctrl &= BMCR_ANENABLE; + ctrl |= mii_bmcr_encode_fixed(speed, + duplex); + port_sgmii_w(dev, port, mmd, MII_BMCR, + ctrl); + } + } else { + p->phydev.link = 0; + } + } else if (reg == MII_BMSR) { + p->phydev.link = (val & BMSR_LSTATUS); + } + } + + return val; +} + +static int ksz9477_pcs_write(struct mii_bus *bus, int phy, int mmd, int reg, + u16 val) +{ + struct ksz_device *dev = bus->priv; + int port = ksz_get_sgmii_port(dev); + + if (mmd == MDIO_MMD_VEND2) { + struct ksz_port *p = &dev->ports[port]; + + if (reg == MMD_SR_MII_AUTO_NEG_CTRL) { + u16 sgmii_mode = SR_MII_PCS_SGMII << SR_MII_PCS_MODE_S; + + /* Need these bits for 1000BASE-X mode to work with + * AN on. + */ + if (!(val & sgmii_mode)) + val |= SR_MII_SGMII_LINK_UP | + SR_MII_TX_CFG_PHY_MASTER; + + /* SGMII interrupt in the port cannot be masked, so + * make sure interrupt is not enabled as it is not + * handled. + */ + val &= ~SR_MII_AUTO_NEG_COMPLETE_INTR; + } else if (reg == MII_BMCR) { + /* The MII_ADVERTISE register needs to write once + * before doing auto-negotiation for the correct + * config_word to be sent out after reset. + */ + if ((val & BMCR_ANENABLE) && !p->sgmii_adv_write) { + u16 adv; + + /* The SGMII port cannot disable flow control + * so it is better to just advertise symmetric + * pause. + */ + port_sgmii_r(dev, port, mmd, MII_ADVERTISE, + &adv); + adv |= ADVERTISE_1000XPAUSE; + adv &= ~ADVERTISE_1000XPSE_ASYM; + port_sgmii_w(dev, port, mmd, MII_ADVERTISE, + adv); + p->sgmii_adv_write = 1; + } else if (val & BMCR_RESET) { + p->sgmii_adv_write = 0; + } + } else if (reg == MII_ADVERTISE) { + /* XPCS driver writes to this register so there is no + * need to update it for the errata. + */ + p->sgmii_adv_write = 1; + } + } + port_sgmii_w(dev, port, mmd, reg, val); + + return 0; +} + +int ksz9477_pcs_create(struct ksz_device *dev) +{ + /* This chip has a SGMII port. */ + if (ksz_has_sgmii_port(dev)) { + int port = ksz_get_sgmii_port(dev); + struct ksz_port *p = &dev->ports[port]; + struct phylink_pcs *pcs; + struct mii_bus *bus; + int ret; + + bus = devm_mdiobus_alloc(dev->dev); + if (!bus) + return -ENOMEM; + + bus->name = "ksz_pcs_mdio_bus"; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-pcs", + dev_name(dev->dev)); + bus->read_c45 = &ksz9477_pcs_read; + bus->write_c45 = &ksz9477_pcs_write; + bus->parent = dev->dev; + bus->phy_mask = ~0; + bus->priv = dev; + + ret = devm_mdiobus_register(dev->dev, bus); + if (ret) + return ret; + + pcs = xpcs_create_pcs_mdiodev(bus, 0); + if (IS_ERR(pcs)) + return PTR_ERR(pcs); + p->pcs = pcs; + } + + return 0; +} + int ksz9477_reset_switch(struct ksz_device *dev) { u8 data8; @@ -978,6 +1162,14 @@ void ksz9477_get_caps(struct ksz_device *dev, int port, if (dev->info->gbit_capable[port]) config->mac_capabilities |= MAC_1000FD; + + if (ksz_is_sgmii_port(dev, port)) { + struct ksz_port *p = &dev->ports[port]; + + phy_interface_or(config->supported_interfaces, + config->supported_interfaces, + p->pcs->supported_interfaces); + } } int ksz9477_set_ageing_time(struct ksz_device *dev, unsigned int msecs) diff --git a/drivers/net/dsa/microchip/ksz9477.h b/drivers/net/dsa/microchip/ksz9477.h index d2166b0d881e..0d1a6dfda23e 100644 --- a/drivers/net/dsa/microchip/ksz9477.h +++ b/drivers/net/dsa/microchip/ksz9477.h @@ -2,7 +2,7 @@ /* * Microchip KSZ9477 series Header file * - * Copyright (C) 2017-2022 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #ifndef __KSZ9477_H @@ -97,4 +97,6 @@ void ksz9477_acl_match_process_l2(struct ksz_device *dev, int port, u16 ethtype, u8 *src_mac, u8 *dst_mac, unsigned long cookie, u32 prio); +int ksz9477_pcs_create(struct ksz_device *dev); + #endif diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index f95a9aac56ee..7c142c17b3f6 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -2,7 +2,7 @@ /* * Microchip switch driver main logic * - * Copyright (C) 2017-2024 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #include <linux/delay.h> @@ -408,12 +408,29 @@ static void ksz9477_phylink_mac_link_up(struct phylink_config *config, int speed, int duplex, bool tx_pause, bool rx_pause); +static struct phylink_pcs * +ksz_phylink_mac_select_pcs(struct phylink_config *config, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; + struct ksz_port *p = &dev->ports[dp->index]; + + if (ksz_is_sgmii_port(dev, dp->index) && + (interface == PHY_INTERFACE_MODE_SGMII || + interface == PHY_INTERFACE_MODE_1000BASEX)) + return p->pcs; + + return NULL; +} + static const struct phylink_mac_ops ksz9477_phylink_mac_ops = { .mac_config = ksz_phylink_mac_config, .mac_link_down = ksz_phylink_mac_link_down, .mac_link_up = ksz9477_phylink_mac_link_up, .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, + .mac_select_pcs = ksz_phylink_mac_select_pcs, }; static const struct ksz_dev_ops ksz9477_dev_ops = { @@ -451,6 +468,7 @@ static const struct ksz_dev_ops ksz9477_dev_ops = { .reset = ksz9477_reset_switch, .init = ksz9477_switch_init, .exit = ksz9477_switch_exit, + .pcs_create = ksz9477_pcs_create, }; static const struct phylink_mac_ops lan937x_phylink_mac_ops = { @@ -1093,8 +1111,7 @@ static const struct regmap_range ksz9477_valid_regs[] = { regmap_reg_range(0x701b, 0x701b), regmap_reg_range(0x701f, 0x7020), regmap_reg_range(0x7030, 0x7030), - regmap_reg_range(0x7200, 0x7203), - regmap_reg_range(0x7206, 0x7207), + regmap_reg_range(0x7200, 0x7207), regmap_reg_range(0x7300, 0x7301), regmap_reg_range(0x7400, 0x7401), regmap_reg_range(0x7403, 0x7403), @@ -1610,6 +1627,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { true, false, false}, .gbit_capable = {true, true, true, true, true, true, true}, .ptp_capable = true, + .sgmii_port = 7, .wr_table = &ksz9477_register_set, .rd_table = &ksz9477_register_set, }, @@ -2002,6 +2020,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .internal_phy = {true, true, true, true, true, false, false}, .gbit_capable = {true, true, true, true, true, true, true}, + .sgmii_port = 7, .wr_table = &ksz9477_register_set, .rd_table = &ksz9477_register_set, }, @@ -2137,7 +2156,7 @@ void ksz_r_mib_stats64(struct ksz_device *dev, int port) spin_unlock(&mib->stats64_lock); - if (dev->info->phy_errata_9477) { + if (dev->info->phy_errata_9477 && !ksz_is_sgmii_port(dev, port)) { ret = ksz9477_errata_monitor(dev, port, raw->tx_late_col); if (ret) dev_err(dev->dev, "Failed to monitor transmission halt\n"); @@ -2767,8 +2786,9 @@ static int ksz_irq_common_setup(struct ksz_device *dev, struct ksz_irq *kirq) kirq->dev = dev; kirq->masked = ~0; - kirq->domain = irq_domain_add_simple(dev->dev->of_node, kirq->nirqs, 0, - &ksz_irq_domain_ops, kirq); + kirq->domain = irq_domain_create_simple(of_fwnode_handle(dev->dev->of_node), + kirq->nirqs, 0, + &ksz_irq_domain_ops, kirq); if (!kirq->domain) return -ENOMEM; @@ -2845,6 +2865,12 @@ static int ksz_setup(struct dsa_switch *ds) if (ret) return ret; + if (ksz_has_sgmii_port(dev) && dev->dev_ops->pcs_create) { + ret = dev->dev_ops->pcs_create(dev); + if (ret) + return ret; + } + /* set broadcast storm protection 10% rate */ regmap_update_bits(ksz_regmap_16(dev), regs[S_BROADCAST_CTRL], BROADCAST_STORM_RATE, @@ -3692,6 +3718,10 @@ static void ksz_phylink_mac_config(struct phylink_config *config, if (dev->info->internal_phy[port]) return; + /* No need to configure XMII control register when using SGMII. */ + if (ksz_is_sgmii_port(dev, port)) + return; + if (phylink_autoneg_inband(mode)) { dev_err(dev->dev, "In-band AN not supported!\n"); return; @@ -4078,6 +4108,89 @@ static int ksz_ets_band_to_queue(struct tc_ets_qopt_offload_replace_params *p, return p->bands - 1 - band; } +/** + * ksz88x3_tc_ets_add - Configure ETS (Enhanced Transmission Selection) + * for a port on KSZ88x3 switch + * @dev: Pointer to the KSZ switch device structure + * @port: Port number to configure + * @p: Pointer to offload replace parameters describing ETS bands and mapping + * + * The KSZ88x3 supports two scheduling modes: Strict Priority and + * Weighted Fair Queuing (WFQ). Both modes have fixed behavior: + * - No configurable queue-to-priority mapping + * - No weight adjustment in WFQ mode + * + * This function configures the switch to use strict priority mode by + * clearing the WFQ enable bit for all queues associated with ETS bands. + * If strict priority is not explicitly requested, the switch will default + * to WFQ mode. + * + * Return: 0 on success, or a negative error code on failure + */ +static int ksz88x3_tc_ets_add(struct ksz_device *dev, int port, + struct tc_ets_qopt_offload_replace_params *p) +{ + int ret, band; + + /* Only strict priority mode is supported for now. + * WFQ is implicitly enabled when strict mode is disabled. + */ + for (band = 0; band < p->bands; band++) { + int queue = ksz_ets_band_to_queue(p, band); + u8 reg; + + /* Calculate TXQ Split Control register address for this + * port/queue + */ + reg = KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue); + + /* Clear WFQ enable bit to select strict priority scheduling */ + ret = ksz_rmw8(dev, reg, KSZ8873_TXQ_WFQ_ENABLE, 0); + if (ret) + return ret; + } + + return 0; +} + +/** + * ksz88x3_tc_ets_del - Reset ETS (Enhanced Transmission Selection) config + * for a port on KSZ88x3 switch + * @dev: Pointer to the KSZ switch device structure + * @port: Port number to reset + * + * The KSZ88x3 supports only fixed scheduling modes: Strict Priority or + * Weighted Fair Queuing (WFQ), with no reconfiguration of weights or + * queue mapping. This function resets the port’s scheduling mode to + * the default, which is WFQ, by enabling the WFQ bit for all queues. + * + * Return: 0 on success, or a negative error code on failure + */ +static int ksz88x3_tc_ets_del(struct ksz_device *dev, int port) +{ + int ret, queue; + + /* Iterate over all transmit queues for this port */ + for (queue = 0; queue < dev->info->num_tx_queues; queue++) { + u8 reg; + + /* Calculate TXQ Split Control register address for this + * port/queue + */ + reg = KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue); + + /* Set WFQ enable bit to revert back to default scheduling + * mode + */ + ret = ksz_rmw8(dev, reg, KSZ8873_TXQ_WFQ_ENABLE, + KSZ8873_TXQ_WFQ_ENABLE); + if (ret) + return ret; + } + + return 0; +} + static int ksz_queue_set_strict(struct ksz_device *dev, int port, int queue) { int ret; @@ -4159,6 +4272,7 @@ static int ksz_tc_ets_del(struct ksz_device *dev, int port) for (queue = 0; queue < dev->info->num_tx_queues; queue++) { ret = ksz_queue_set_wrr(dev, port, queue, KSZ9477_DEFAULT_WRR_WEIGHT); + if (ret) return ret; } @@ -4211,7 +4325,7 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port, struct ksz_device *dev = ds->priv; int ret; - if (is_ksz8(dev)) + if (is_ksz8(dev) && !ksz_is_ksz88x3(dev)) return -EOPNOTSUPP; if (qopt->parent != TC_H_ROOT) { @@ -4225,9 +4339,16 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port, if (ret) return ret; - return ksz_tc_ets_add(dev, port, &qopt->replace_params); + if (ksz_is_ksz88x3(dev)) + return ksz88x3_tc_ets_add(dev, port, + &qopt->replace_params); + else + return ksz_tc_ets_add(dev, port, &qopt->replace_params); case TC_ETS_DESTROY: - return ksz_tc_ets_del(dev, port); + if (ksz_is_ksz88x3(dev)) + return ksz88x3_tc_ets_del(dev, port); + else + return ksz_tc_ets_del(dev, port); case TC_ETS_STATS: case TC_ETS_GRAFT: return -EOPNOTSUPP; diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index af17a9c030d4..a08417df2ca4 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* Microchip switch driver common header * - * Copyright (C) 2017-2024 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #ifndef __KSZ_COMMON_H @@ -10,6 +10,7 @@ #include <linux/etherdevice.h> #include <linux/kernel.h> #include <linux/mutex.h> +#include <linux/pcs/pcs-xpcs.h> #include <linux/phy.h> #include <linux/regmap.h> #include <net/dsa.h> @@ -93,6 +94,7 @@ struct ksz_chip_data { bool internal_phy[KSZ_MAX_NUM_PORTS]; bool gbit_capable[KSZ_MAX_NUM_PORTS]; bool ptp_capable; + u8 sgmii_port; const struct regmap_access_table *wr_table; const struct regmap_access_table *rd_table; }; @@ -132,6 +134,7 @@ struct ksz_port { u32 force:1; u32 read:1; /* read MIB counters in background */ u32 freeze:1; /* MIB counter freeze is enabled */ + u32 sgmii_adv_write:1; struct ksz_port_mib mib; phy_interface_t interface; @@ -141,8 +144,9 @@ struct ksz_port { void *acl_priv; struct ksz_irq pirq; u8 num; + struct phylink_pcs *pcs; #if IS_ENABLED(CONFIG_NET_DSA_MICROCHIP_KSZ_PTP) - struct hwtstamp_config tstamp_config; + struct kernel_hwtstamp_config tstamp_config; bool hwts_tx_en; bool hwts_rx_en; struct ksz_irq ptpirq; @@ -440,6 +444,8 @@ struct ksz_dev_ops { int (*reset)(struct ksz_device *dev); int (*init)(struct ksz_device *dev); void (*exit)(struct ksz_device *dev); + + int (*pcs_create)(struct ksz_device *dev); }; struct ksz_device *ksz_switch_alloc(struct device *base, void *priv); @@ -731,6 +737,21 @@ static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port) dev->chip_id == LAN9372_CHIP_ID) && port == KSZ_PORT_4; } +static inline int ksz_get_sgmii_port(struct ksz_device *dev) +{ + return dev->info->sgmii_port - 1; +} + +static inline bool ksz_has_sgmii_port(struct ksz_device *dev) +{ + return dev->info->sgmii_port > 0; +} + +static inline bool ksz_is_sgmii_port(struct ksz_device *dev, int port) +{ + return dev->info->sgmii_port == port + 1; +} + /* STP State Defines */ #define PORT_TX_ENABLE BIT(2) #define PORT_RX_ENABLE BIT(1) @@ -836,6 +857,25 @@ static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port) #define SW_HI_SPEED_DRIVE_STRENGTH_S 4 #define SW_LO_SPEED_DRIVE_STRENGTH_S 0 +/* TXQ Split Control Register for per-port, per-queue configuration. + * Register 0xAF is TXQ Split for Q3 on Port 1. + * Register offset formula: 0xAF + (port * 4) + (3 - queue) + * where: port = 0..2, queue = 0..3 + */ +#define KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue) \ + (0xAF + ((port) * 4) + (3 - (queue))) + +/* Bit 7 selects between: + * 0 = Strict priority mode (highest-priority queue first) + * 1 = Weighted Fair Queuing (WFQ) mode: + * Queue weights: Q3:Q2:Q1:Q0 = 8:4:2:1 + * If any queues are empty, weight is redistributed. + * + * Note: This is referred to as "Weighted Fair Queuing" (WFQ) in KSZ8863/8873 + * documentation, and as "Weighted Round Robin" (WRR) in KSZ9477 family docs. + */ +#define KSZ8873_TXQ_WFQ_ENABLE BIT(7) + #define KSZ9477_REG_PORT_OUT_RATE_0 0x0420 #define KSZ9477_OUT_RATE_NO_LIMIT 0 diff --git a/drivers/net/dsa/microchip/ksz_ptp.c b/drivers/net/dsa/microchip/ksz_ptp.c index 22fb9ef4645c..8ab664e85f13 100644 --- a/drivers/net/dsa/microchip/ksz_ptp.c +++ b/drivers/net/dsa/microchip/ksz_ptp.c @@ -319,22 +319,21 @@ int ksz_get_ts_info(struct dsa_switch *ds, int port, struct kernel_ethtool_ts_in return 0; } -int ksz_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr) +int ksz_hwtstamp_get(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config) { struct ksz_device *dev = ds->priv; - struct hwtstamp_config *config; struct ksz_port *prt; prt = &dev->ports[port]; - config = &prt->tstamp_config; + *config = prt->tstamp_config; - return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ? - -EFAULT : 0; + return 0; } static int ksz_set_hwtstamp_config(struct ksz_device *dev, struct ksz_port *prt, - struct hwtstamp_config *config) + struct kernel_hwtstamp_config *config) { int ret; @@ -404,26 +403,21 @@ static int ksz_set_hwtstamp_config(struct ksz_device *dev, return ksz_ptp_enable_mode(dev); } -int ksz_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr) +int ksz_hwtstamp_set(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack) { struct ksz_device *dev = ds->priv; - struct hwtstamp_config config; struct ksz_port *prt; int ret; prt = &dev->ports[port]; - if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) - return -EFAULT; - - ret = ksz_set_hwtstamp_config(dev, prt, &config); + ret = ksz_set_hwtstamp_config(dev, prt, config); if (ret) return ret; - memcpy(&prt->tstamp_config, &config, sizeof(config)); - - if (copy_to_user(ifr->ifr_data, &config, sizeof(config))) - return -EFAULT; + prt->tstamp_config = *config; return 0; } @@ -1136,8 +1130,8 @@ int ksz_ptp_irq_setup(struct dsa_switch *ds, u8 p) init_completion(&port->tstamp_msg_comp); - ptpirq->domain = irq_domain_add_linear(dev->dev->of_node, ptpirq->nirqs, - &ksz_ptp_irq_domain_ops, ptpirq); + ptpirq->domain = irq_domain_create_linear(of_fwnode_handle(dev->dev->of_node), + ptpirq->nirqs, &ksz_ptp_irq_domain_ops, ptpirq); if (!ptpirq->domain) return -ENOMEM; diff --git a/drivers/net/dsa/microchip/ksz_ptp.h b/drivers/net/dsa/microchip/ksz_ptp.h index 2f1783c0d723..3086e519b1b6 100644 --- a/drivers/net/dsa/microchip/ksz_ptp.h +++ b/drivers/net/dsa/microchip/ksz_ptp.h @@ -39,8 +39,11 @@ void ksz_ptp_clock_unregister(struct dsa_switch *ds); int ksz_get_ts_info(struct dsa_switch *ds, int port, struct kernel_ethtool_ts_info *ts); -int ksz_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr); -int ksz_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr); +int ksz_hwtstamp_get(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config); +int ksz_hwtstamp_set(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack); void ksz_port_txtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb); void ksz_port_deferred_xmit(struct kthread_work *work); bool ksz_port_rxtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb, |