diff options
Diffstat (limited to 'drivers/net/ethernet/meta/fbnic/fbnic_irq.c')
| -rw-r--r-- | drivers/net/ethernet/meta/fbnic/fbnic_irq.c | 142 |
1 files changed, 96 insertions, 46 deletions
diff --git a/drivers/net/ethernet/meta/fbnic/fbnic_irq.c b/drivers/net/ethernet/meta/fbnic/fbnic_irq.c index 1bbc0e56f3a0..1c88a2bf3a7a 100644 --- a/drivers/net/ethernet/meta/fbnic/fbnic_irq.c +++ b/drivers/net/ethernet/meta/fbnic/fbnic_irq.c @@ -19,69 +19,105 @@ static irqreturn_t fbnic_fw_msix_intr(int __always_unused irq, void *data) return IRQ_HANDLED; } +static int __fbnic_fw_enable_mbx(struct fbnic_dev *fbd, int vector) +{ + int err; + + /* Initialize mailbox and attempt to poll it into ready state */ + fbnic_mbx_init(fbd); + err = fbnic_mbx_poll_tx_ready(fbd); + if (err) { + dev_warn(fbd->dev, "FW mailbox did not enter ready state\n"); + return err; + } + + /* Enable interrupt and unmask the vector */ + enable_irq(vector); + fbnic_wr32(fbd, FBNIC_INTR_MASK_CLEAR(0), 1u << FBNIC_FW_MSIX_ENTRY); + + return 0; +} + /** - * fbnic_fw_enable_mbx - Configure and initialize Firmware Mailbox + * fbnic_fw_request_mbx - Configure and initialize Firmware Mailbox * @fbd: Pointer to device to initialize * - * This function will initialize the firmware mailbox rings, enable the IRQ - * and initialize the communication between the Firmware and the host. The - * firmware is expected to respond to the initialization by sending an - * interrupt essentially notifying the host that it has seen the - * initialization and is now synced up. + * This function will allocate the IRQ and then reinitialize the mailbox + * starting communication between the host and firmware. * * Return: non-zero on failure. **/ -int fbnic_fw_enable_mbx(struct fbnic_dev *fbd) +int fbnic_fw_request_mbx(struct fbnic_dev *fbd) { - u32 vector = fbd->fw_msix_vector; - int err; + struct pci_dev *pdev = to_pci_dev(fbd->dev); + int vector, err; + + WARN_ON(fbd->fw_msix_vector); + + vector = pci_irq_vector(pdev, FBNIC_FW_MSIX_ENTRY); + if (vector < 0) + return vector; /* Request the IRQ for FW Mailbox vector. */ err = request_threaded_irq(vector, NULL, &fbnic_fw_msix_intr, - IRQF_ONESHOT, dev_name(fbd->dev), fbd); + IRQF_ONESHOT | IRQF_NO_AUTOEN, + dev_name(fbd->dev), fbd); if (err) return err; /* Initialize mailbox and attempt to poll it into ready state */ - fbnic_mbx_init(fbd); - err = fbnic_mbx_poll_tx_ready(fbd); - if (err) { - dev_warn(fbd->dev, "FW mailbox did not enter ready state\n"); + err = __fbnic_fw_enable_mbx(fbd, vector); + if (err) free_irq(vector, fbd); - return err; - } - /* Enable interrupts */ - fbnic_wr32(fbd, FBNIC_INTR_MASK_CLEAR(0), 1u << FBNIC_FW_MSIX_ENTRY); + fbd->fw_msix_vector = vector; - return 0; + return err; } /** - * fbnic_fw_disable_mbx - Disable mailbox and place it in standby state - * @fbd: Pointer to device to disable + * fbnic_fw_disable_mbx - Temporarily place mailbox in standby state + * @fbd: Pointer to device * - * This function will disable the mailbox interrupt, free any messages still - * in the mailbox and place it into a standby state. The firmware is - * expected to see the update and assume that the host is in the reset state. + * Shutdown the mailbox by notifying the firmware to stop sending us logs, mask + * and synchronize the IRQ, and then clean up the rings. **/ -void fbnic_fw_disable_mbx(struct fbnic_dev *fbd) +static void fbnic_fw_disable_mbx(struct fbnic_dev *fbd) { - /* Disable interrupt and free vector */ - fbnic_wr32(fbd, FBNIC_INTR_MASK_SET(0), 1u << FBNIC_FW_MSIX_ENTRY); + /* Disable interrupt and synchronize the IRQ */ + disable_irq(fbd->fw_msix_vector); - /* Free the vector */ - free_irq(fbd->fw_msix_vector, fbd); + /* Mask the vector */ + fbnic_wr32(fbd, FBNIC_INTR_MASK_SET(0), 1u << FBNIC_FW_MSIX_ENTRY); /* Make sure disabling logs message is sent, must be done here to * avoid risk of completing without a running interrupt. */ fbnic_mbx_flush_tx(fbd); - - /* Reset the mailboxes to the initialized state */ fbnic_mbx_clean(fbd); } +/** + * fbnic_fw_free_mbx - Disable mailbox and place it in standby state + * @fbd: Pointer to device to disable + * + * This function will disable the mailbox interrupt, free any messages still + * in the mailbox and place it into a disabled state. The firmware is + * expected to see the update and assume that the host is in the reset state. + **/ +void fbnic_fw_free_mbx(struct fbnic_dev *fbd) +{ + /* Vector has already been freed */ + if (!fbd->fw_msix_vector) + return; + + fbnic_fw_disable_mbx(fbd); + + /* Free the vector */ + free_irq(fbd->fw_msix_vector, fbd); + fbd->fw_msix_vector = 0; +} + static irqreturn_t fbnic_pcs_msix_intr(int __always_unused irq, void *data) { struct fbnic_dev *fbd = data; @@ -101,7 +137,7 @@ static irqreturn_t fbnic_pcs_msix_intr(int __always_unused irq, void *data) } /** - * fbnic_pcs_irq_enable - Configure the MAC to enable it to advertise link + * fbnic_pcs_request_irq - Configure the PCS to enable it to advertise link * @fbd: Pointer to device to initialize * * This function provides basic bringup for the MAC/PCS IRQ. For now the IRQ @@ -109,41 +145,61 @@ static irqreturn_t fbnic_pcs_msix_intr(int __always_unused irq, void *data) * * Return: non-zero on failure. **/ -int fbnic_pcs_irq_enable(struct fbnic_dev *fbd) +int fbnic_pcs_request_irq(struct fbnic_dev *fbd) { - u32 vector = fbd->pcs_msix_vector; - int err; + struct pci_dev *pdev = to_pci_dev(fbd->dev); + int vector, err; - /* Request the IRQ for MAC link vector. - * Map MAC cause to it, and unmask it + WARN_ON(fbd->pcs_msix_vector); + + vector = pci_irq_vector(pdev, FBNIC_PCS_MSIX_ENTRY); + if (vector < 0) + return vector; + + /* Request the IRQ for PCS link vector. + * Map PCS cause to it, and unmask it */ err = request_irq(vector, &fbnic_pcs_msix_intr, 0, fbd->netdev->name, fbd); if (err) return err; + /* Map and enable interrupt, unmask vector after link is configured */ fbnic_wr32(fbd, FBNIC_INTR_MSIX_CTRL(FBNIC_INTR_MSIX_CTRL_PCS_IDX), FBNIC_PCS_MSIX_ENTRY | FBNIC_INTR_MSIX_CTRL_ENABLE); + fbd->pcs_msix_vector = vector; + return 0; } /** - * fbnic_pcs_irq_disable - Teardown the MAC IRQ to prepare for stopping + * fbnic_pcs_free_irq - Teardown the PCS IRQ to prepare for stopping * @fbd: Pointer to device that is stopping * - * This function undoes the work done in fbnic_pcs_irq_enable and prepares + * This function undoes the work done in fbnic_pcs_request_irq and prepares * the device to no longer receive traffic on the host interface. **/ -void fbnic_pcs_irq_disable(struct fbnic_dev *fbd) +void fbnic_pcs_free_irq(struct fbnic_dev *fbd) { + /* Vector has already been freed */ + if (!fbd->pcs_msix_vector) + return; + /* Disable interrupt */ fbnic_wr32(fbd, FBNIC_INTR_MSIX_CTRL(FBNIC_INTR_MSIX_CTRL_PCS_IDX), FBNIC_PCS_MSIX_ENTRY); + fbnic_wrfl(fbd); + + /* Synchronize IRQ to prevent race that would unmask vector */ + synchronize_irq(fbd->pcs_msix_vector); + + /* Mask the vector */ fbnic_wr32(fbd, FBNIC_INTR_MASK_SET(0), 1u << FBNIC_PCS_MSIX_ENTRY); /* Free the vector */ free_irq(fbd->pcs_msix_vector, fbd); + fbd->pcs_msix_vector = 0; } void fbnic_synchronize_irq(struct fbnic_dev *fbd, int nr) @@ -226,9 +282,6 @@ void fbnic_free_irqs(struct fbnic_dev *fbd) { struct pci_dev *pdev = to_pci_dev(fbd->dev); - fbd->pcs_msix_vector = 0; - fbd->fw_msix_vector = 0; - fbd->num_irqs = 0; pci_free_irq_vectors(pdev); @@ -254,8 +307,5 @@ int fbnic_alloc_irqs(struct fbnic_dev *fbd) fbd->num_irqs = num_irqs; - fbd->pcs_msix_vector = pci_irq_vector(pdev, FBNIC_PCS_MSIX_ENTRY); - fbd->fw_msix_vector = pci_irq_vector(pdev, FBNIC_FW_MSIX_ENTRY); - return 0; } |