diff options
Diffstat (limited to 'drivers/net/phy/air_en8811h.c')
| -rw-r--r-- | drivers/net/phy/air_en8811h.c | 103 |
1 files changed, 100 insertions, 3 deletions
diff --git a/drivers/net/phy/air_en8811h.c b/drivers/net/phy/air_en8811h.c index e9fd24cb7270..57fbd8df9438 100644 --- a/drivers/net/phy/air_en8811h.c +++ b/drivers/net/phy/air_en8811h.c @@ -11,6 +11,7 @@ * Copyright (C) 2023 Airoha Technology Corp. */ +#include <linux/clk-provider.h> #include <linux/phy.h> #include <linux/firmware.h> #include <linux/property.h> @@ -115,6 +116,11 @@ #define EN8811H_GPIO_OUTPUT 0xcf8b8 #define EN8811H_GPIO_OUTPUT_345 (BIT(3) | BIT(4) | BIT(5)) +#define EN8811H_HWTRAP1 0xcf914 +#define EN8811H_HWTRAP1_CKO BIT(12) +#define EN8811H_CLK_CGM 0xcf958 +#define EN8811H_CLK_CGM_CKO BIT(26) + #define EN8811H_FW_CTRL_1 0x0f0018 #define EN8811H_FW_CTRL_1_START 0x0 #define EN8811H_FW_CTRL_1_FINISH 0x1 @@ -142,10 +148,15 @@ struct led { unsigned long state; }; +#define clk_hw_to_en8811h_priv(_hw) \ + container_of(_hw, struct en8811h_priv, hw) + struct en8811h_priv { - u32 firmware_version; - bool mcu_needs_restart; - struct led led[EN8811H_LED_COUNT]; + u32 firmware_version; + bool mcu_needs_restart; + struct led led[EN8811H_LED_COUNT]; + struct clk_hw hw; + struct phy_device *phydev; }; enum { @@ -806,6 +817,86 @@ static int en8811h_led_hw_is_supported(struct phy_device *phydev, u8 index, return 0; }; +static unsigned long en8811h_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent) +{ + struct en8811h_priv *priv = clk_hw_to_en8811h_priv(hw); + struct phy_device *phydev = priv->phydev; + u32 pbus_value; + int ret; + + ret = air_buckpbus_reg_read(phydev, EN8811H_HWTRAP1, &pbus_value); + if (ret < 0) + return ret; + + return (pbus_value & EN8811H_HWTRAP1_CKO) ? 50000000 : 25000000; +} + +static int en8811h_clk_enable(struct clk_hw *hw) +{ + struct en8811h_priv *priv = clk_hw_to_en8811h_priv(hw); + struct phy_device *phydev = priv->phydev; + + return air_buckpbus_reg_modify(phydev, EN8811H_CLK_CGM, + EN8811H_CLK_CGM_CKO, + EN8811H_CLK_CGM_CKO); +} + +static void en8811h_clk_disable(struct clk_hw *hw) +{ + struct en8811h_priv *priv = clk_hw_to_en8811h_priv(hw); + struct phy_device *phydev = priv->phydev; + + air_buckpbus_reg_modify(phydev, EN8811H_CLK_CGM, + EN8811H_CLK_CGM_CKO, 0); +} + +static int en8811h_clk_is_enabled(struct clk_hw *hw) +{ + struct en8811h_priv *priv = clk_hw_to_en8811h_priv(hw); + struct phy_device *phydev = priv->phydev; + u32 pbus_value; + int ret; + + ret = air_buckpbus_reg_read(phydev, EN8811H_CLK_CGM, &pbus_value); + if (ret < 0) + return ret; + + return (pbus_value & EN8811H_CLK_CGM_CKO); +} + +static const struct clk_ops en8811h_clk_ops = { + .recalc_rate = en8811h_clk_recalc_rate, + .enable = en8811h_clk_enable, + .disable = en8811h_clk_disable, + .is_enabled = en8811h_clk_is_enabled, +}; + +static int en8811h_clk_provider_setup(struct device *dev, struct clk_hw *hw) +{ + struct clk_init_data init; + int ret; + + if (!IS_ENABLED(CONFIG_COMMON_CLK)) + return 0; + + init.name = devm_kasprintf(dev, GFP_KERNEL, "%s-cko", + fwnode_get_name(dev_fwnode(dev))); + if (!init.name) + return -ENOMEM; + + init.ops = &en8811h_clk_ops; + init.flags = 0; + init.num_parents = 0; + hw->init = &init; + + ret = devm_clk_hw_register(dev, hw); + if (ret) + return ret; + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, hw); +} + static int en8811h_probe(struct phy_device *phydev) { struct en8811h_priv *priv; @@ -838,6 +929,12 @@ static int en8811h_probe(struct phy_device *phydev) return ret; } + priv->phydev = phydev; + /* Co-Clock Output */ + ret = en8811h_clk_provider_setup(&phydev->mdio.dev, &priv->hw); + if (ret) + return ret; + /* Configure led gpio pins as output */ ret = air_buckpbus_reg_modify(phydev, EN8811H_GPIO_OUTPUT, EN8811H_GPIO_OUTPUT_345, |