diff options
Diffstat (limited to 'drivers/net/phy/dp83867.c')
| -rw-r--r-- | drivers/net/phy/dp83867.c | 81 |
1 files changed, 9 insertions, 72 deletions
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index c1451df430ac..deeefb962566 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -92,11 +92,6 @@ #define DP83867_STRAP_STS1_RESERVED BIT(11) /* STRAP_STS2 bits */ -#define DP83867_STRAP_STS2_CLK_SKEW_TX_MASK GENMASK(6, 4) -#define DP83867_STRAP_STS2_CLK_SKEW_TX_SHIFT 4 -#define DP83867_STRAP_STS2_CLK_SKEW_RX_MASK GENMASK(2, 0) -#define DP83867_STRAP_STS2_CLK_SKEW_RX_SHIFT 0 -#define DP83867_STRAP_STS2_CLK_SKEW_NONE BIT(2) #define DP83867_STRAP_STS2_STRAP_FLD BIT(10) /* PHY CTRL bits */ @@ -111,10 +106,8 @@ /* RGMIIDCTL bits */ #define DP83867_RGMII_TX_CLK_DELAY_MAX 0xf #define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4 -#define DP83867_RGMII_TX_CLK_DELAY_INV (DP83867_RGMII_TX_CLK_DELAY_MAX + 1) #define DP83867_RGMII_RX_CLK_DELAY_MAX 0xf #define DP83867_RGMII_RX_CLK_DELAY_SHIFT 0 -#define DP83867_RGMII_RX_CLK_DELAY_INV (DP83867_RGMII_RX_CLK_DELAY_MAX + 1) /* IO_MUX_CFG bits */ #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MASK 0x1f @@ -506,48 +499,6 @@ static int dp83867_config_port_mirroring(struct phy_device *phydev) return 0; } -static int dp83867_verify_rgmii_cfg(struct phy_device *phydev) -{ - struct dp83867_private *dp83867 = phydev->priv; - - /* Existing behavior was to use default pin strapping delay in rgmii - * mode, but rgmii should have meant no delay. Warn existing users. - */ - if (phydev->interface == PHY_INTERFACE_MODE_RGMII) { - const u16 val = phy_read_mmd(phydev, DP83867_DEVADDR, - DP83867_STRAP_STS2); - const u16 txskew = (val & DP83867_STRAP_STS2_CLK_SKEW_TX_MASK) >> - DP83867_STRAP_STS2_CLK_SKEW_TX_SHIFT; - const u16 rxskew = (val & DP83867_STRAP_STS2_CLK_SKEW_RX_MASK) >> - DP83867_STRAP_STS2_CLK_SKEW_RX_SHIFT; - - if (txskew != DP83867_STRAP_STS2_CLK_SKEW_NONE || - rxskew != DP83867_STRAP_STS2_CLK_SKEW_NONE) - phydev_warn(phydev, - "PHY has delays via pin strapping, but phy-mode = 'rgmii'\n" - "Should be 'rgmii-id' to use internal delays txskew:%x rxskew:%x\n", - txskew, rxskew); - } - - /* RX delay *must* be specified if internal delay of RX is used. */ - if ((phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || - phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) && - dp83867->rx_id_delay == DP83867_RGMII_RX_CLK_DELAY_INV) { - phydev_err(phydev, "ti,rx-internal-delay must be specified\n"); - return -EINVAL; - } - - /* TX delay *must* be specified if internal delay of TX is used. */ - if ((phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || - phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) && - dp83867->tx_id_delay == DP83867_RGMII_TX_CLK_DELAY_INV) { - phydev_err(phydev, "ti,tx-internal-delay must be specified\n"); - return -EINVAL; - } - - return 0; -} - #if IS_ENABLED(CONFIG_OF_MDIO) static int dp83867_of_init_io_impedance(struct phy_device *phydev) { @@ -631,7 +582,7 @@ static int dp83867_of_init(struct phy_device *phydev) dp83867->sgmii_ref_clk_en = of_property_read_bool(of_node, "ti,sgmii-ref-clock-output-enable"); - dp83867->rx_id_delay = DP83867_RGMII_RX_CLK_DELAY_INV; + dp83867->rx_id_delay = DP83867_RGMIIDCTL_2_00_NS; ret = of_property_read_u32(of_node, "ti,rx-internal-delay", &dp83867->rx_id_delay); if (!ret && dp83867->rx_id_delay > DP83867_RGMII_RX_CLK_DELAY_MAX) { @@ -641,7 +592,7 @@ static int dp83867_of_init(struct phy_device *phydev) return -EINVAL; } - dp83867->tx_id_delay = DP83867_RGMII_TX_CLK_DELAY_INV; + dp83867->tx_id_delay = DP83867_RGMIIDCTL_2_00_NS; ret = of_property_read_u32(of_node, "ti,tx-internal-delay", &dp83867->tx_id_delay); if (!ret && dp83867->tx_id_delay > DP83867_RGMII_TX_CLK_DELAY_MAX) { @@ -761,7 +712,6 @@ static int dp83867_config_init(struct phy_device *phydev) { struct dp83867_private *dp83867 = phydev->priv; int ret, val, bs; - u16 delay; /* Force speed optimization for the PHY even if it strapped */ ret = phy_modify(phydev, DP83867_CFG2, DP83867_DOWNSHIFT_EN, @@ -769,10 +719,6 @@ static int dp83867_config_init(struct phy_device *phydev) if (ret) return ret; - ret = dp83867_verify_rgmii_cfg(phydev); - if (ret) - return ret; - /* RX_DV/RX_CTRL strapped in mode 1 or mode 2 workaround */ if (dp83867->rxctrl_strap_quirk) phy_clear_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, @@ -836,13 +782,7 @@ static int dp83867_config_init(struct phy_device *phydev) if (ret) return ret; - /* If rgmii mode with no internal delay is selected, we do NOT use - * aligned mode as one might expect. Instead we use the PHY's default - * based on pin strapping. And the "mode 0" default is to *use* - * internal delay with a value of 7 (2.00 ns). - * - * Set up RGMII delays - */ + /* Set up RGMII delays */ val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL); val &= ~(DP83867_RGMII_TX_CLK_DELAY_EN | DP83867_RGMII_RX_CLK_DELAY_EN); @@ -857,15 +797,9 @@ static int dp83867_config_init(struct phy_device *phydev) phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL, val); - delay = 0; - if (dp83867->rx_id_delay != DP83867_RGMII_RX_CLK_DELAY_INV) - delay |= dp83867->rx_id_delay; - if (dp83867->tx_id_delay != DP83867_RGMII_TX_CLK_DELAY_INV) - delay |= dp83867->tx_id_delay << - DP83867_RGMII_TX_CLK_DELAY_SHIFT; - phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIIDCTL, - delay); + dp83867->rx_id_delay | + (dp83867->tx_id_delay << DP83867_RGMII_TX_CLK_DELAY_SHIFT)); } /* If specified, set io impedance */ @@ -1009,8 +943,11 @@ static void dp83867_link_change_notify(struct phy_device *phydev) } } -static int dp83867_loopback(struct phy_device *phydev, bool enable) +static int dp83867_loopback(struct phy_device *phydev, bool enable, int speed) { + if (enable && speed) + return -EOPNOTSUPP; + return phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK, enable ? BMCR_LOOPBACK : 0); } |