diff options
Diffstat (limited to 'drivers/net/phy/smsc.c')
| -rw-r--r-- | drivers/net/phy/smsc.c | 57 |
1 files changed, 52 insertions, 5 deletions
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 31463b9e5697..b6489da5cfcd 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -155,10 +155,29 @@ static int smsc_phy_reset(struct phy_device *phydev) static int lan87xx_config_aneg(struct phy_device *phydev) { - int rc; + u8 mdix_ctrl; int val; + int rc; + + /* When auto-negotiation is disabled (forced mode), the PHY's + * Auto-MDIX will continue toggling the TX/RX pairs. + * + * To establish a stable link, we must select a fixed MDI mode. + * If the user has not specified a fixed MDI mode (i.e., mdix_ctrl is + * 'auto'), we default to ETH_TP_MDI. This choice of a ETH_TP_MDI mode + * mirrors the behavior the hardware would exhibit if the AUTOMDIX_EN + * strap were configured for a fixed MDI connection. + */ + if (phydev->autoneg == AUTONEG_DISABLE) { + if (phydev->mdix_ctrl == ETH_TP_MDI_AUTO) + mdix_ctrl = ETH_TP_MDI; + else + mdix_ctrl = phydev->mdix_ctrl; + } else { + mdix_ctrl = phydev->mdix_ctrl; + } - switch (phydev->mdix_ctrl) { + switch (mdix_ctrl) { case ETH_TP_MDI: val = SPECIAL_CTRL_STS_OVRRD_AMDIX_; break; @@ -167,7 +186,8 @@ static int lan87xx_config_aneg(struct phy_device *phydev) SPECIAL_CTRL_STS_AMDIX_STATE_; break; case ETH_TP_MDI_AUTO: - val = SPECIAL_CTRL_STS_AMDIX_ENABLE_; + val = SPECIAL_CTRL_STS_OVRRD_AMDIX_ | + SPECIAL_CTRL_STS_AMDIX_ENABLE_; break; default: return genphy_config_aneg(phydev); @@ -183,7 +203,7 @@ static int lan87xx_config_aneg(struct phy_device *phydev) rc |= val; phy_write(phydev, SPECIAL_CTRL_STS, rc); - phydev->mdix = phydev->mdix_ctrl; + phydev->mdix = mdix_ctrl; return genphy_config_aneg(phydev); } @@ -261,6 +281,33 @@ int lan87xx_read_status(struct phy_device *phydev) } EXPORT_SYMBOL_GPL(lan87xx_read_status); +static int lan87xx_phy_config_init(struct phy_device *phydev) +{ + int rc; + + /* The LAN87xx PHY's initial MDI-X mode is determined by the AUTOMDIX_EN + * hardware strap, but the driver cannot read the strap's status. This + * creates an unpredictable initial state. + * + * To ensure consistent and reliable behavior across all boards, + * override the strap configuration on initialization and force the PHY + * into a known state with Auto-MDIX enabled, which is the expected + * default for modern hardware. + */ + rc = phy_modify(phydev, SPECIAL_CTRL_STS, + SPECIAL_CTRL_STS_OVRRD_AMDIX_ | + SPECIAL_CTRL_STS_AMDIX_ENABLE_ | + SPECIAL_CTRL_STS_AMDIX_STATE_, + SPECIAL_CTRL_STS_OVRRD_AMDIX_ | + SPECIAL_CTRL_STS_AMDIX_ENABLE_); + if (rc < 0) + return rc; + + phydev->mdix_ctrl = ETH_TP_MDI_AUTO; + + return smsc_phy_config_init(phydev); +} + static int lan874x_phy_config_init(struct phy_device *phydev) { u16 val; @@ -695,7 +742,7 @@ static struct phy_driver smsc_phy_driver[] = { /* basic functions */ .read_status = lan87xx_read_status, - .config_init = smsc_phy_config_init, + .config_init = lan87xx_phy_config_init, .soft_reset = smsc_phy_reset, .config_aneg = lan87xx_config_aneg, |