diff options
Diffstat (limited to 'drivers/platform/x86/asus-wmi.c')
| -rw-r--r-- | drivers/platform/x86/asus-wmi.c | 148 |
1 files changed, 109 insertions, 39 deletions
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 47cc766624d7..f7191fdded14 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -142,16 +142,20 @@ module_param(fnlock_default, bool, 0444); #define ASUS_MINI_LED_2024_STRONG 0x01 #define ASUS_MINI_LED_2024_OFF 0x02 -/* Controls the power state of the USB0 hub on ROG Ally which input is on */ #define ASUS_USB0_PWR_EC0_CSEE "\\_SB.PCI0.SBRG.EC0.CSEE" -/* 300ms so far seems to produce a reliable result on AC and battery */ -#define ASUS_USB0_PWR_EC0_CSEE_WAIT 1500 +/* + * The period required to wait after screen off/on/s2idle.check in MS. + * Time here greatly impacts the wake behaviour. Used in suspend/wake. + */ +#define ASUS_USB0_PWR_EC0_CSEE_WAIT 600 +#define ASUS_USB0_PWR_EC0_CSEE_OFF 0xB7 +#define ASUS_USB0_PWR_EC0_CSEE_ON 0xB8 static const char * const ashs_ids[] = { "ATK4001", "ATK4002", NULL }; static int throttle_thermal_policy_write(struct asus_wmi *); -static const struct dmi_system_id asus_ally_mcu_quirk[] = { +static const struct dmi_system_id asus_rog_ally_device[] = { { .matches = { DMI_MATCH(DMI_BOARD_NAME, "RC71L"), @@ -274,9 +278,6 @@ struct asus_wmi { u32 tablet_switch_dev_id; bool tablet_switch_inverted; - /* The ROG Ally device requires the MCU USB device be disconnected before suspend */ - bool ally_mcu_usb_switch; - enum fan_type fan_type; enum fan_type gpu_fan_type; enum fan_type mid_fan_type; @@ -336,6 +337,9 @@ struct asus_wmi { struct asus_wmi_driver *driver; }; +/* Global to allow setting externally without requiring driver data */ +static enum asus_ally_mcu_hack use_ally_mcu_hack = ASUS_WMI_ALLY_MCU_HACK_INIT; + /* WMI ************************************************************************/ static int asus_wmi_evaluate_method3(u32 method_id, @@ -550,7 +554,7 @@ static int asus_wmi_get_devstate(struct asus_wmi *asus, u32 dev_id, u32 *retval) return 0; } -static int asus_wmi_set_devstate(u32 dev_id, u32 ctrl_param, +int asus_wmi_set_devstate(u32 dev_id, u32 ctrl_param, u32 *retval) { return asus_wmi_evaluate_method(ASUS_WMI_METHODID_DEVS, dev_id, @@ -1344,6 +1348,44 @@ static ssize_t nv_temp_target_show(struct device *dev, static DEVICE_ATTR_RW(nv_temp_target); /* Ally MCU Powersave ********************************************************/ + +/* + * The HID driver needs to check MCU version and set this to false if the MCU FW + * version is >= the minimum requirements. New FW do not need the hacks. + */ +void set_ally_mcu_hack(enum asus_ally_mcu_hack status) +{ + use_ally_mcu_hack = status; + pr_debug("%s Ally MCU suspend quirk\n", + status == ASUS_WMI_ALLY_MCU_HACK_ENABLED ? "Enabled" : "Disabled"); +} +EXPORT_SYMBOL_NS_GPL(set_ally_mcu_hack, "ASUS_WMI"); + +/* + * mcu_powersave should be enabled always, as it is fixed in MCU FW versions: + * - v313 for Ally X + * - v319 for Ally 1 + * The HID driver checks MCU versions and so should set this if requirements match + */ +void set_ally_mcu_powersave(bool enabled) +{ + int result, err; + + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_MCU_POWERSAVE, enabled, &result); + if (err) { + pr_warn("Failed to set MCU powersave: %d\n", err); + return; + } + if (result > 1) { + pr_warn("Failed to set MCU powersave (result): 0x%x\n", result); + return; + } + + pr_debug("%s MCU Powersave\n", + enabled ? "Enabled" : "Disabled"); +} +EXPORT_SYMBOL_NS_GPL(set_ally_mcu_powersave, "ASUS_WMI"); + static ssize_t mcu_powersave_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -4712,6 +4754,21 @@ static int asus_wmi_add(struct platform_device *pdev) if (err) goto fail_platform; + if (use_ally_mcu_hack == ASUS_WMI_ALLY_MCU_HACK_INIT) { + if (acpi_has_method(NULL, ASUS_USB0_PWR_EC0_CSEE) + && dmi_check_system(asus_rog_ally_device)) + use_ally_mcu_hack = ASUS_WMI_ALLY_MCU_HACK_ENABLED; + if (dmi_match(DMI_BOARD_NAME, "RC71")) { + /* + * These steps ensure the device is in a valid good state, this is + * especially important for the Ally 1 after a reboot. + */ + acpi_execute_simple_method(NULL, ASUS_USB0_PWR_EC0_CSEE, + ASUS_USB0_PWR_EC0_CSEE_ON); + msleep(ASUS_USB0_PWR_EC0_CSEE_WAIT); + } + } + /* ensure defaults for tunables */ asus->ppt_pl2_sppt = 5; asus->ppt_pl1_spl = 5; @@ -4725,8 +4782,6 @@ static int asus_wmi_add(struct platform_device *pdev) asus->dgpu_disable_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_DGPU); asus->kbd_rgb_state_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_TUF_RGB_STATE); asus->oobe_state_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_OOBE); - asus->ally_mcu_usb_switch = acpi_has_method(NULL, ASUS_USB0_PWR_EC0_CSEE) - && dmi_check_system(asus_ally_mcu_quirk); if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_MINI_LED_MODE)) asus->mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE; @@ -4913,34 +4968,6 @@ static int asus_hotk_resume(struct device *device) return 0; } -static int asus_hotk_resume_early(struct device *device) -{ - struct asus_wmi *asus = dev_get_drvdata(device); - - if (asus->ally_mcu_usb_switch) { - /* sleep required to prevent USB0 being yanked then reappearing rapidly */ - if (ACPI_FAILURE(acpi_execute_simple_method(NULL, ASUS_USB0_PWR_EC0_CSEE, 0xB8))) - dev_err(device, "ROG Ally MCU failed to connect USB dev\n"); - else - msleep(ASUS_USB0_PWR_EC0_CSEE_WAIT); - } - return 0; -} - -static int asus_hotk_prepare(struct device *device) -{ - struct asus_wmi *asus = dev_get_drvdata(device); - - if (asus->ally_mcu_usb_switch) { - /* sleep required to ensure USB0 is disabled before sleep continues */ - if (ACPI_FAILURE(acpi_execute_simple_method(NULL, ASUS_USB0_PWR_EC0_CSEE, 0xB7))) - dev_err(device, "ROG Ally MCU failed to disconnect USB dev\n"); - else - msleep(ASUS_USB0_PWR_EC0_CSEE_WAIT); - } - return 0; -} - static int asus_hotk_restore(struct device *device) { struct asus_wmi *asus = dev_get_drvdata(device); @@ -4988,11 +5015,50 @@ static int asus_hotk_restore(struct device *device) return 0; } +static int asus_hotk_prepare(struct device *device) +{ + if (use_ally_mcu_hack == ASUS_WMI_ALLY_MCU_HACK_ENABLED) { + acpi_execute_simple_method(NULL, ASUS_USB0_PWR_EC0_CSEE, + ASUS_USB0_PWR_EC0_CSEE_OFF); + msleep(ASUS_USB0_PWR_EC0_CSEE_WAIT); + } + return 0; +} + +#if defined(CONFIG_SUSPEND) +static void asus_ally_s2idle_restore(void) +{ + if (use_ally_mcu_hack == ASUS_WMI_ALLY_MCU_HACK_ENABLED) { + acpi_execute_simple_method(NULL, ASUS_USB0_PWR_EC0_CSEE, + ASUS_USB0_PWR_EC0_CSEE_ON); + msleep(ASUS_USB0_PWR_EC0_CSEE_WAIT); + } +} + +/* Use only for Ally devices due to the wake_on_ac */ +static struct acpi_s2idle_dev_ops asus_ally_s2idle_dev_ops = { + .restore = asus_ally_s2idle_restore, +}; + +static void asus_s2idle_check_register(void) +{ + if (acpi_register_lps0_dev(&asus_ally_s2idle_dev_ops)) + pr_warn("failed to register LPS0 sleep handler in asus-wmi\n"); +} + +static void asus_s2idle_check_unregister(void) +{ + acpi_unregister_lps0_dev(&asus_ally_s2idle_dev_ops); +} +#else +static void asus_s2idle_check_register(void) {} +static void asus_s2idle_check_unregister(void) {} +#endif /* CONFIG_SUSPEND */ + static const struct dev_pm_ops asus_pm_ops = { .thaw = asus_hotk_thaw, .restore = asus_hotk_restore, .resume = asus_hotk_resume, - .resume_early = asus_hotk_resume_early, .prepare = asus_hotk_prepare, }; @@ -5020,6 +5086,8 @@ static int asus_wmi_probe(struct platform_device *pdev) return ret; } + asus_s2idle_check_register(); + return asus_wmi_add(pdev); } @@ -5052,6 +5120,8 @@ EXPORT_SYMBOL_GPL(asus_wmi_register_driver); void asus_wmi_unregister_driver(struct asus_wmi_driver *driver) { + asus_s2idle_check_unregister(); + platform_device_unregister(driver->platform_device); platform_driver_unregister(&driver->platform_driver); used = false; |