diff options
Diffstat (limited to 'drivers/pwm/Kconfig')
| -rw-r--r-- | drivers/pwm/Kconfig | 113 |
1 files changed, 74 insertions, 39 deletions
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 4731d5b90d7e..d9bcd1e8413e 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -114,6 +114,16 @@ config PWM_AXI_PWMGEN To compile this driver as a module, choose M here: the module will be called pwm-axi-pwmgen. +config PWM_BCM2835 + tristate "BCM2835 PWM support" + depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST + depends on HAS_IOMEM + help + PWM framework driver for BCM2835 controller (Raspberry Pi) + + To compile this driver as a module, choose M here: the module + will be called pwm-bcm2835. + config PWM_BCM_IPROC tristate "iProc PWM support" depends on ARCH_BCM_IPROC || COMPILE_TEST @@ -137,16 +147,6 @@ config PWM_BCM_KONA To compile this driver as a module, choose M here: the module will be called pwm-bcm-kona. -config PWM_BCM2835 - tristate "BCM2835 PWM support" - depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST - depends on HAS_IOMEM - help - PWM framework driver for BCM2835 controller (Raspberry Pi) - - To compile this driver as a module, choose M here: the module - will be called pwm-bcm2835. - config PWM_BERLIN tristate "Marvell Berlin PWM support" depends on ARCH_BERLIN || COMPILE_TEST @@ -351,6 +351,18 @@ config PWM_KEEMBAY To compile this driver as a module, choose M here: the module will be called pwm-keembay. +config PWM_LOONGSON + tristate "Loongson PWM support" + depends on MACH_LOONGSON64 || COMPILE_TEST + depends on COMMON_CLK + help + Generic PWM framework driver for Loongson family. + It can be found on Loongson-2K series cpus and Loongson LS7A + bridge chips. + + To compile this driver as a module, choose M here: the module + will be called pwm-loongson. + config PWM_LP3943 tristate "TI/National Semiconductor LP3943 PWM support" depends on MFD_LP3943 @@ -411,26 +423,17 @@ config PWM_LPSS_PLATFORM To compile this driver as a module, choose M here: the module will be called pwm-lpss-platform. -config PWM_MESON - tristate "Amlogic Meson PWM driver" - depends on ARCH_MESON || COMPILE_TEST - depends on COMMON_CLK && HAS_IOMEM - help - The platform driver for Amlogic Meson PWM controller. - - To compile this driver as a module, choose M here: the module - will be called pwm-meson. - -config PWM_MTK_DISP - tristate "MediaTek display PWM driver" - depends on ARCH_MEDIATEK || COMPILE_TEST - depends on HAS_IOMEM +config PWM_MC33XS2410 + tristate "MC33XS2410 PWM support" + depends on OF + depends on SPI help - Generic PWM framework driver for MediaTek disp-pwm device. - The PWM is used to control the backlight brightness for display. + NXP MC33XS2410 high-side switch driver. The MC33XS2410 is a four + channel high-side switch. The device is operational from 3.0 V + to 60 V. The device is controlled by SPI port for configuration. To compile this driver as a module, choose M here: the module - will be called pwm-mtk-disp. + will be called pwm-mc33xs2410. config PWM_MEDIATEK tristate "MediaTek PWM support" @@ -442,6 +445,16 @@ config PWM_MEDIATEK To compile this driver as a module, choose M here: the module will be called pwm-mediatek. +config PWM_MESON + tristate "Amlogic Meson PWM driver" + depends on ARCH_MESON || COMPILE_TEST + depends on COMMON_CLK && HAS_IOMEM + help + The platform driver for Amlogic Meson PWM controller. + + To compile this driver as a module, choose M here: the module + will be called pwm-meson. + config PWM_MICROCHIP_CORE tristate "Microchip corePWM PWM support" depends on ARCH_MICROCHIP_POLARFIRE || COMPILE_TEST @@ -452,6 +465,17 @@ config PWM_MICROCHIP_CORE To compile this driver as a module, choose M here: the module will be called pwm-microchip-core. +config PWM_MTK_DISP + tristate "MediaTek display PWM driver" + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on HAS_IOMEM + help + Generic PWM framework driver for MediaTek disp-pwm device. + The PWM is used to control the backlight brightness for display. + + To compile this driver as a module, choose M here: the module + will be called pwm-mtk-disp. + config PWM_MXS tristate "Freescale MXS PWM support" depends on ARCH_MXS || COMPILE_TEST @@ -510,7 +534,7 @@ config PWM_RASPBERRYPI_POE Enable Raspberry Pi firmware controller PWM bus used to control the official RPI PoE hat -config PWM_RCAR +config PWM_RENESAS_RCAR tristate "Renesas R-Car PWM support" depends on ARCH_RENESAS || COMPILE_TEST depends on HAS_IOMEM @@ -521,6 +545,28 @@ config PWM_RCAR To compile this driver as a module, choose M here: the module will be called pwm-rcar. +config PWM_RENESAS_RZG2L_GPT + tristate "Renesas RZ/G2L General PWM Timer support" + depends on ARCH_RZG2L || COMPILE_TEST + depends on HAS_IOMEM + help + This driver exposes the General PWM Timer controller found in Renesas + RZ/G2L like chips through the PWM API. + + To compile this driver as a module, choose M here: the module + will be called pwm-rzg2l-gpt. + +config PWM_RENESAS_RZ_MTU3 + tristate "Renesas RZ/G2L MTU3a PWM Timer support" + depends on RZ_MTU3 + depends on HAS_IOMEM + help + This driver exposes the MTU3a PWM Timer controller found in Renesas + RZ/G2L like chips through the PWM API. + + To compile this driver as a module, choose M here: the module + will be called pwm-rz-mtu3. + config PWM_RENESAS_TPU tristate "Renesas TPU PWM support" depends on ARCH_RENESAS || COMPILE_TEST @@ -540,17 +586,6 @@ config PWM_ROCKCHIP Generic PWM framework driver for the PWM controller found on Rockchip SoCs. -config PWM_RZ_MTU3 - tristate "Renesas RZ/G2L MTU3a PWM Timer support" - depends on RZ_MTU3 - depends on HAS_IOMEM - help - This driver exposes the MTU3a PWM Timer controller found in Renesas - RZ/G2L like chips through the PWM API. - - To compile this driver as a module, choose M here: the module - will be called pwm-rz-mtu3. - config PWM_SAMSUNG tristate "Samsung PWM support" depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST |