diff options
Diffstat (limited to 'drivers/serial/ioc4_serial.c')
| -rw-r--r-- | drivers/serial/ioc4_serial.c | 50 |
1 files changed, 19 insertions, 31 deletions
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index d054f1265701..ba4e13a22a50 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -838,7 +838,7 @@ static int inline port_init(struct ioc4_port *port) port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; writel(port->ip_tx_prod, &port->ip_serial_regs->stpir); port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; - writel(port->ip_rx_cons, &port->ip_serial_regs->srcir); + writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir); /* Disable interrupts for this 16550 */ uart = port->ip_uart_regs; @@ -1272,8 +1272,9 @@ static inline int set_rx_timeout(struct ioc4_port *port, int timeout) * and set the rx threshold to that amount. There are 4 chars * per ring entry, so we'll divide the number of chars that will * arrive in timeout by 4. + * So .... timeout * baud / 10 / HZ / 4, with HZ = 100. */ - threshold = timeout * port->ip_baud / 10 / HZ / 4; + threshold = timeout * port->ip_baud / 4000; if (threshold == 0) threshold = 1; /* otherwise we'll intr all the time! */ @@ -1285,8 +1286,10 @@ static inline int set_rx_timeout(struct ioc4_port *port, int timeout) writel(port->ip_sscr, &port->ip_serial_regs->sscr); - /* Now set the rx timeout to the given value */ - timeout = timeout * IOC4_SRTR_HZ / HZ; + /* Now set the rx timeout to the given value + * again timeout * IOC4_SRTR_HZ / HZ + */ + timeout = timeout * IOC4_SRTR_HZ / 100; if (timeout > IOC4_SRTR_CNT) timeout = IOC4_SRTR_CNT; @@ -1380,7 +1383,7 @@ config_port(struct ioc4_port *port, if (port->ip_tx_lowat == 0) port->ip_tx_lowat = 1; - set_rx_timeout(port, port->ip_rx_timeout); + set_rx_timeout(port, 2); return 0; } @@ -1685,8 +1688,8 @@ ioc4_change_speed(struct uart_port *the_port, { struct ioc4_port *port = get_ioc4_port(the_port); int baud, bits; - unsigned cflag, cval; - int new_parity = 0, new_parity_enable = 0, new_stop = 1, new_data = 8; + unsigned cflag; + int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8; struct uart_info *info = the_port->info; cflag = new_termios->c_cflag; @@ -1694,48 +1697,35 @@ ioc4_change_speed(struct uart_port *the_port, switch (cflag & CSIZE) { case CS5: new_data = 5; - cval = 0x00; bits = 7; break; case CS6: new_data = 6; - cval = 0x01; bits = 8; break; case CS7: new_data = 7; - cval = 0x02; bits = 9; break; case CS8: new_data = 8; - cval = 0x03; bits = 10; break; default: /* cuz we always need a default ... */ new_data = 5; - cval = 0x00; bits = 7; break; } if (cflag & CSTOPB) { - cval |= 0x04; bits++; new_stop = 1; } if (cflag & PARENB) { - cval |= UART_LCR_PARITY; bits++; new_parity_enable = 1; - } - if (cflag & PARODD) { - cval |= UART_LCR_EPAR; - new_parity = 1; - } - if (cflag & IGNPAR) { - cval &= ~UART_LCR_PARITY; - new_parity_enable = 0; + if (cflag & PARODD) + new_parity = 1; } baud = uart_get_baud_rate(the_port, new_termios, old_termios, MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED); @@ -1765,10 +1755,15 @@ ioc4_change_speed(struct uart_port *the_port, the_port->ignore_status_mask &= ~N_DATA_READY; } - if (cflag & CRTSCTS) + if (cflag & CRTSCTS) { info->flags |= ASYNC_CTS_FLOW; - else + port->ip_sscr |= IOC4_SSCR_HFC_EN; + } + else { info->flags &= ~ASYNC_CTS_FLOW; + port->ip_sscr &= ~IOC4_SSCR_HFC_EN; + } + writel(port->ip_sscr, &port->ip_serial_regs->sscr); /* Set the configuration and proper notification call */ DPRINT_CONFIG(("%s : port 0x%p cflag 0%o " @@ -1825,12 +1820,6 @@ static inline int ic4_startup_local(struct uart_port *the_port) /* set the speed of the serial port */ ioc4_change_speed(the_port, info->tty->termios, (struct termios *)0); - /* enable hardware flow control - after ioc4_change_speed because - * ASYNC_CTS_FLOW is set there */ - if (info->flags & ASYNC_CTS_FLOW) { - port->ip_sscr |= IOC4_SSCR_HFC_EN; - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } info->flags |= UIF_INITIALIZED; return 0; } @@ -1847,7 +1836,6 @@ static void ioc4_cb_output_lowat(struct ioc4_port *port) } } - /** * handle_intr - service any interrupts for the given port - 2nd level * called via sd_intr |