diff options
Diffstat (limited to 'drivers/usb/core/hub.c')
| -rw-r--r-- | drivers/usb/core/hub.c | 153 |
1 files changed, 105 insertions, 48 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 21ac9b464696..416af6d76374 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -18,6 +18,7 @@ #include <linux/sched/mm.h> #include <linux/list.h> #include <linux/slab.h> +#include <linux/string_choices.h> #include <linux/kcov.h> #include <linux/ioctl.h> #include <linux/usb.h> @@ -1384,7 +1385,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) } /* Stop hub_wq and related activity */ - del_timer_sync(&hub->irq_urb_retry); + timer_delete_sync(&hub->irq_urb_retry); usb_kill_urb(hub->urb); if (hub->has_indicators) cancel_delayed_work_sync(&hub->leds); @@ -1496,7 +1497,7 @@ static int hub_configure(struct usb_hub *hub, maxchild = hub->descriptor->bNbrPorts; dev_info(hub_dev, "%d port%s detected\n", maxchild, - (maxchild == 1) ? "" : "s"); + str_plural(maxchild)); hub->ports = kcalloc(maxchild, sizeof(struct usb_port *), GFP_KERNEL); if (!hub->ports) { @@ -1848,6 +1849,17 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) hdev = interface_to_usbdev(intf); /* + * The USB 2.0 spec prohibits hubs from having more than one + * configuration or interface, and we rely on this prohibition. + * Refuse to accept a device that violates it. + */ + if (hdev->descriptor.bNumConfigurations > 1 || + hdev->actconfig->desc.bNumInterfaces > 1) { + dev_err(&intf->dev, "Invalid hub with more than one config or interface\n"); + return -EINVAL; + } + + /* * Set default autosuspend delay as 0 to speedup bus suspend, * based on the below considerations: * @@ -4139,16 +4151,16 @@ static int usb_set_device_initiated_lpm(struct usb_device *udev, break; default: dev_warn(&udev->dev, "%s: Can't %s non-U1 or U2 state.\n", - __func__, enable ? "enable" : "disable"); + __func__, str_enable_disable(enable)); return -EINVAL; } if (udev->state != USB_STATE_CONFIGURED) { dev_dbg(&udev->dev, "%s: Can't %s %s state " "for unconfigured device.\n", - __func__, enable ? "enable" : "disable", + __func__, str_enable_disable(enable), usb3_lpm_names[state]); - return 0; + return -EINVAL; } if (enable) { @@ -4172,8 +4184,7 @@ static int usb_set_device_initiated_lpm(struct usb_device *udev, } if (ret < 0) { dev_warn(&udev->dev, "%s of device-initiated %s failed.\n", - enable ? "Enable" : "Disable", - usb3_lpm_names[state]); + str_enable_disable(enable), usb3_lpm_names[state]); return -EBUSY; } return 0; @@ -4223,9 +4234,9 @@ static int usb_set_lpm_timeout(struct usb_device *udev, } /* - * Don't allow device intiated U1/U2 if the system exit latency + one bus - * interval is greater than the minimum service interval of any active - * periodic endpoint. See USB 3.2 section 9.4.9 + * Don't allow device intiated U1/U2 if device isn't in the configured state, + * or the system exit latency + one bus interval is greater than the minimum + * service interval of any active periodic endpoint. See USB 3.2 section 9.4.9 */ static bool usb_device_may_initiate_lpm(struct usb_device *udev, enum usb3_link_state state) @@ -4233,7 +4244,7 @@ static bool usb_device_may_initiate_lpm(struct usb_device *udev, unsigned int sel; /* us */ int i, j; - if (!udev->lpm_devinit_allow) + if (!udev->lpm_devinit_allow || !udev->actconfig) return false; if (state == USB3_LPM_U1) @@ -4281,7 +4292,7 @@ static bool usb_device_may_initiate_lpm(struct usb_device *udev, * driver know about it. If that call fails, it should be harmless, and just * take up more slightly more bus bandwidth for unnecessary U1/U2 exit latency. */ -static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, +static int usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { int timeout; @@ -4290,7 +4301,7 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, /* Skip if the device BOS descriptor couldn't be read */ if (!udev->bos) - return; + return -EINVAL; u1_mel = udev->bos->ss_cap->bU1devExitLat; u2_mel = udev->bos->ss_cap->bU2DevExitLat; @@ -4301,7 +4312,7 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, */ if ((state == USB3_LPM_U1 && u1_mel == 0) || (state == USB3_LPM_U2 && u2_mel == 0)) - return; + return -EINVAL; /* We allow the host controller to set the U1/U2 timeout internally * first, so that it can change its schedule to account for the @@ -4312,13 +4323,13 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, /* xHCI host controller doesn't want to enable this LPM state. */ if (timeout == 0) - return; + return -EINVAL; if (timeout < 0) { dev_warn(&udev->dev, "Could not enable %s link state, " "xHCI error %i.\n", usb3_lpm_names[state], timeout); - return; + return timeout; } if (usb_set_lpm_timeout(udev, state, timeout)) { @@ -4327,29 +4338,15 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, * host know that this link state won't be enabled. */ hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state); - return; - } - - /* Only a configured device will accept the Set Feature - * U1/U2_ENABLE - */ - if (udev->actconfig && - usb_device_may_initiate_lpm(udev, state)) { - if (usb_set_device_initiated_lpm(udev, state, true)) { - /* - * Request to enable device initiated U1/U2 failed, - * better to turn off lpm in this case. - */ - usb_set_lpm_timeout(udev, state, 0); - hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state); - return; - } + return -EBUSY; } if (state == USB3_LPM_U1) udev->usb3_lpm_u1_enabled = 1; else if (state == USB3_LPM_U2) udev->usb3_lpm_u2_enabled = 1; + + return 0; } /* * Disable the hub-initiated U1/U2 idle timeouts, and disable device-initiated @@ -4382,8 +4379,6 @@ static int usb_disable_link_state(struct usb_hcd *hcd, struct usb_device *udev, if (usb_set_lpm_timeout(udev, state, 0)) return -EBUSY; - usb_set_device_initiated_lpm(udev, state, false); - if (hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state)) dev_warn(&udev->dev, "Could not disable xHCI %s timeout, " "bus schedule bandwidth may be impacted.\n", @@ -4413,6 +4408,7 @@ static int usb_disable_link_state(struct usb_hcd *hcd, struct usb_device *udev, int usb_disable_lpm(struct usb_device *udev) { struct usb_hcd *hcd; + int err; if (!udev || !udev->parent || udev->speed < USB_SPEED_SUPER || @@ -4430,14 +4426,19 @@ int usb_disable_lpm(struct usb_device *udev) /* If LPM is enabled, attempt to disable it. */ if (usb_disable_link_state(hcd, udev, USB3_LPM_U1)) - goto enable_lpm; + goto disable_failed; if (usb_disable_link_state(hcd, udev, USB3_LPM_U2)) - goto enable_lpm; + goto disable_failed; + + err = usb_set_device_initiated_lpm(udev, USB3_LPM_U1, false); + if (!err) + usb_set_device_initiated_lpm(udev, USB3_LPM_U2, false); return 0; -enable_lpm: - usb_enable_lpm(udev); +disable_failed: + udev->lpm_disable_count--; + return -EBUSY; } EXPORT_SYMBOL_GPL(usb_disable_lpm); @@ -4498,10 +4499,24 @@ void usb_enable_lpm(struct usb_device *udev) port_dev = hub->ports[udev->portnum - 1]; if (port_dev->usb3_lpm_u1_permit) - usb_enable_link_state(hcd, udev, USB3_LPM_U1); + if (usb_enable_link_state(hcd, udev, USB3_LPM_U1)) + return; if (port_dev->usb3_lpm_u2_permit) - usb_enable_link_state(hcd, udev, USB3_LPM_U2); + if (usb_enable_link_state(hcd, udev, USB3_LPM_U2)) + return; + + /* + * Enable device initiated U1/U2 with a SetFeature(U1/U2_ENABLE) request + * if system exit latency is short enough and device is configured + */ + if (usb_device_may_initiate_lpm(udev, USB3_LPM_U1)) { + if (usb_set_device_initiated_lpm(udev, USB3_LPM_U1, true)) + return; + + if (usb_device_may_initiate_lpm(udev, USB3_LPM_U2)) + usb_set_device_initiated_lpm(udev, USB3_LPM_U2, true); + } } EXPORT_SYMBOL_GPL(usb_enable_lpm); @@ -4697,9 +4712,6 @@ void usb_ep0_reinit(struct usb_device *udev) } EXPORT_SYMBOL_GPL(usb_ep0_reinit); -#define usb_sndaddr0pipe() (PIPE_CONTROL << 30) -#define usb_rcvaddr0pipe() ((PIPE_CONTROL << 30) | USB_DIR_IN) - static int hub_set_address(struct usb_device *udev, int devnum) { int retval; @@ -4723,7 +4735,7 @@ static int hub_set_address(struct usb_device *udev, int devnum) if (hcd->driver->address_device) retval = hcd->driver->address_device(hcd, udev, timeout_ms); else - retval = usb_control_msg(udev, usb_sndaddr0pipe(), + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), USB_REQ_SET_ADDRESS, 0, devnum, 0, NULL, 0, timeout_ms); if (retval == 0) { @@ -4804,7 +4816,7 @@ static int get_bMaxPacketSize0(struct usb_device *udev, for (i = 0; i < GET_MAXPACKET0_TRIES; ++i) { /* Start with invalid values in case the transfer fails */ buf->bDescriptorType = buf->bMaxPacketSize0 = 0; - rc = usb_control_msg(udev, usb_rcvaddr0pipe(), + rc = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, USB_DT_DEVICE << 8, 0, buf, size, @@ -6056,6 +6068,36 @@ void usb_hub_cleanup(void) } /* usb_hub_cleanup() */ /** + * hub_hc_release_resources - clear resources used by host controller + * @udev: pointer to device being released + * + * Context: task context, might sleep + * + * Function releases the host controller resources in correct order before + * making any operation on resuming usb device. The host controller resources + * allocated for devices in tree should be released starting from the last + * usb device in tree toward the root hub. This function is used only during + * resuming device when usb device require reinitialization – that is, when + * flag udev->reset_resume is set. + * + * This call is synchronous, and may not be used in an interrupt context. + */ +static void hub_hc_release_resources(struct usb_device *udev) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(udev); + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + int i; + + /* Release up resources for all children before this device */ + for (i = 0; i < udev->maxchild; i++) + if (hub->ports[i]->child) + hub_hc_release_resources(hub->ports[i]->child); + + if (hcd->driver->reset_device) + hcd->driver->reset_device(hcd, udev); +} + +/** * usb_reset_and_verify_device - perform a USB port reset to reinitialize a device * @udev: device to reset (not in SUSPENDED or NOTATTACHED state) * @@ -6095,6 +6137,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) struct usb_hub *parent_hub; struct usb_hcd *hcd = bus_to_hcd(udev->bus); struct usb_device_descriptor descriptor; + struct usb_interface *intf; struct usb_host_bos *bos; int i, j, ret = 0; int port1 = udev->portnum; @@ -6119,6 +6162,9 @@ static int usb_reset_and_verify_device(struct usb_device *udev) bos = udev->bos; udev->bos = NULL; + if (udev->reset_resume) + hub_hc_release_resources(udev); + mutex_lock(hcd->address0_mutex); for (i = 0; i < PORT_INIT_TRIES; ++i) { @@ -6149,6 +6195,18 @@ static int usb_reset_and_verify_device(struct usb_device *udev) if (!udev->actconfig) goto done; + /* + * Some devices can't handle setting default altsetting 0 with a + * Set-Interface request. Disable host-side endpoints of those + * interfaces here. Enable and reset them back after host has set + * its internal endpoint structures during usb_hcd_alloc_bandwith() + */ + for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { + intf = udev->actconfig->interface[i]; + if (intf->cur_altsetting->desc.bAlternateSetting == 0) + usb_disable_interface(udev, intf, true); + } + mutex_lock(hcd->bandwidth_mutex); ret = usb_hcd_alloc_bandwidth(udev, udev->actconfig, NULL, NULL); if (ret < 0) { @@ -6180,12 +6238,11 @@ static int usb_reset_and_verify_device(struct usb_device *udev) */ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { struct usb_host_config *config = udev->actconfig; - struct usb_interface *intf = config->interface[i]; struct usb_interface_descriptor *desc; + intf = config->interface[i]; desc = &intf->cur_altsetting->desc; if (desc->bAlternateSetting == 0) { - usb_disable_interface(udev, intf, true); usb_enable_interface(udev, intf, true); ret = 0; } else { |