0 files changed, 0 insertions, 0 deletions
diff --git a/arch/arm/Kbuild b/arch/arm/Kbuild
new file mode 100644
index 000000000000..69de6b6243c7
--- /dev/null
+++ b/arch/arm/Kbuild
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_FPE_NWFPE)		+= nwfpe/
+# Put arch/arm/fastfpe/ to use this.
+obj-$(CONFIG_FPE_FASTFPE)	+= $(patsubst $(src)/%,%,$(wildcard $(src)/fastfpe/))
+obj-$(CONFIG_VFP)		+= vfp/
+obj-$(CONFIG_XEN)		+= xen/
+obj-$(CONFIG_VDSO)		+= vdso/
+obj-y				+= kernel/ mm/ common/
+obj-y				+= probes/
+obj-y				+= net/
+obj-y				+= crypto/
+
+# for cleaning
+subdir- += boot
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 89c4b5ccc68d..45d29320196f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1,80 +1,161 @@
+# SPDX-License-Identifier: GPL-2.0
 config ARM
 	bool
 	default y
-	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
-	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+	select ARCH_32BIT_OFF_T
+	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND
+	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CACHE_LINE_SIZE if OF
+	select ARCH_HAS_CPU_CACHE_ALIASING
+	select ARCH_HAS_CPU_FINALIZE_INIT if MMU
+	select ARCH_HAS_CURRENT_STACK_POINTER
+	select ARCH_HAS_DEBUG_VIRTUAL if MMU
+	select ARCH_HAS_DMA_ALLOC if MMU
+	select ARCH_HAS_DMA_OPS
+	select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE
+	select ARCH_HAS_ELF_RANDOMIZE
+	select ARCH_HAS_FORTIFY_SOURCE
+	select ARCH_HAS_KEEPINITRD
+	select ARCH_HAS_KCOV
+	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
+	select ARCH_HAS_PTE_SPECIAL if ARM_LPAE
+	select ARCH_HAS_SETUP_DMA_OPS
+	select ARCH_HAS_SET_MEMORY
+	select ARCH_STACKWALK
+	select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
+	select ARCH_HAS_STRICT_MODULE_RWX if MMU
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
+	select ARCH_HAS_TEARDOWN_DMA_OPS if MMU
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
-	select ARCH_HAVE_CUSTOM_GPIO_H
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG if CPU_V7 || CPU_V7M || CPU_V6K
+	select ARCH_HAS_GCOV_PROFILE_ALL
+	select ARCH_KEEP_MEMBLOCK
+	select ARCH_HAS_UBSAN
 	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
+	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7
+	select ARCH_NEED_CMPXCHG_1_EMU if CPU_V6
 	select ARCH_SUPPORTS_ATOMIC_RMW
+	select ARCH_SUPPORTS_CFI
+	select ARCH_SUPPORTS_HUGETLBFS if ARM_LPAE
+	select ARCH_SUPPORTS_PER_VMA_LOCK
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
+	select ARCH_USE_MEMTEST
+	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
+	select ARCH_WANT_GENERAL_HUGETLB
 	select ARCH_WANT_IPC_PARSE_VERSION
-	select BUILDTIME_EXTABLE_SORT if MMU
+	select ARCH_WANT_LD_ORPHAN_WARN
+	select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
+	select BUILDTIME_TABLE_SORT if MMU
+	select COMMON_CLK if !(ARCH_RPC || ARCH_FOOTBRIDGE)
 	select CLONE_BACKWARDS
-	select CPU_PM if (SUSPEND || CPU_IDLE)
+	select CPU_PM if SUSPEND || CPU_IDLE
 	select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
+	select DMA_DECLARE_COHERENT
+	select DMA_GLOBAL_POOL if !MMU
+	select DMA_NONCOHERENT_MMAP if MMU
+	select EDAC_SUPPORT
+	select EDAC_ATOMIC_SCRUB
 	select GENERIC_ALLOCATOR
-	select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
+	select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY
+	select GENERIC_ATOMIC64 if CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select GENERIC_IRQ_IPI if SMP
+	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_CPU_DEVICES
+	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
+	select GENERIC_IRQ_SHOW_LEVEL
+	select GENERIC_LIB_DEVMEM_IS_ALLOWED
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
-	select GENERIC_STRNCPY_FROM_USER
-	select GENERIC_STRNLEN_USER
-	select HANDLE_DOMAIN_IRQ
 	select HARDIRQS_SW_RESEND
-	select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
-	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
-	select HAVE_ARCH_KGDB
-	select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
+	select HAS_IOPORT
+	select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT
+	select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
+	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU && (!PREEMPT_RT || !SMP)
+	select HAVE_ARCH_KFENCE if MMU && !XIP_KERNEL
+	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
+	select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
+	select HAVE_ARCH_KSTACK_ERASE
+	select HAVE_ARCH_MMAP_RND_BITS if MMU
+	select HAVE_ARCH_PFN_VALID
+	select HAVE_ARCH_SECCOMP
+	select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT
+	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_BPF_JIT
-	select HAVE_CC_STACKPROTECTOR
-	select HAVE_CONTEXT_TRACKING
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARM_LPAE
+	select HAVE_ARM_SMCCC if CPU_V7
+	select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32
+	select HAVE_CONTEXT_TRACKING_USER
 	select HAVE_C_RECORDMCOUNT
-	select HAVE_DEBUG_KMEMLEAK
-	select HAVE_DMA_API_DEBUG
-	select HAVE_DMA_ATTRS
+	select HAVE_BUILDTIME_MCOUNT_SORT
+	select HAVE_DEBUG_KMEMLEAK if !XIP_KERNEL
 	select HAVE_DMA_CONTIGUOUS if MMU
-	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
+	select HAVE_EXTRA_IPI_TRACEPOINTS
+	select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
+	select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
-	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
-	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
-	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
-	select HAVE_GENERIC_DMA_COHERENT
-	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
-	select HAVE_IDE if PCI || ISA || PCMCIA
+	select HAVE_EXIT_THREAD
+	select HAVE_GUP_FAST if ARM_LPAE
+	select HAVE_FUNCTION_ERROR_INJECTION
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_GRAPH_FREGS
+	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
+	select HAVE_GCC_PLUGINS
+	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZ4
 	select HAVE_KERNEL_LZMA
 	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_XZ
-	select HAVE_KPROBES if !XIP_KERNEL
-	select HAVE_KRETPROBES if (HAVE_KPROBES)
-	select HAVE_MEMBLOCK
-	select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND
-	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
+	select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
+	select HAVE_KRETPROBES if HAVE_KPROBES
+	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if (LD_VERSION >= 23600 || LD_IS_LLD) && LD_CAN_USE_KEEP_IN_OVERLAY
+	select HAVE_MOD_ARCH_SPECIFIC
+	select HAVE_NMI
+	select HAVE_OPTPROBES if !THUMB2_KERNEL
+	select HAVE_PAGE_SIZE_4KB
+	select HAVE_PCI if MMU
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
-	select HAVE_RCU_TABLE_FREE if (SMP && ARM_LPAE)
+	select MMU_GATHER_RCU_TABLE_FREE if SMP && ARM_LPAE
 	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_RSEQ
+	select HAVE_RUST if CPU_LITTLE_ENDIAN && CPU_32v7
+	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
+	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
 	select IRQ_FORCED_THREADING
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_REL
-	select NO_BOOTMEM
+	select NEED_DMA_MAP_STATE
+	select OF_EARLY_FLATTREE if OF
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
+	select PCI_DOMAINS_GENERIC if PCI
+	select PCI_SYSCALL if PCI
 	select PERF_USE_VMALLOC
 	select RTC_LIB
+	select SPARSE_IRQ if !(ARCH_FOOTBRIDGE || ARCH_RPC)
 	select SYS_SUPPORTS_APM_EMULATION
+	select THREAD_INFO_IN_TASK
+	select TIMER_OF if OF
+	select HAVE_ARCH_VMAP_STACK if MMU && ARM_HAS_GROUP_RELOCS
+	select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M
+	select USE_OF if !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	# Above selects are sorted alphabetically; please add new ones
 	# according to that.  Thanks.
 	help
@@ -85,16 +166,16 @@ config ARM
 	  Europe.  There is an ARM Linux project with a web page at
 	  <http://www.arm.linux.org.uk/>.
 
-config ARM_HAS_SG_CHAIN
-	select ARCH_HAS_SG_CHAIN
-	bool
-
-config NEED_SG_DMA_LENGTH
-	bool
+config ARM_HAS_GROUP_RELOCS
+	def_bool !COMPILE_TEST
+	help
+	  Whether or not to use R_ARM_ALU_PC_Gn or R_ARM_LDR_PC_Gn group
+	  relocations. The combined range is -/+ 256 MiB, which is usually
+	  sufficient, but not for allyesconfig, so we disable this feature
+	  when doing compile testing.
 
 config ARM_DMA_USE_IOMMU
 	bool
-	select ARM_HAS_SG_CHAIN
 	select NEED_SG_DMA_LENGTH
 
 if ARM_DMA_USE_IOMMU
@@ -118,9 +199,6 @@ config ARM_DMA_IOMMU_ALIGNMENT
 
 endif
 
-config MIGHT_HAVE_PCI
-	bool
-
 config SYS_SUPPORTS_APM_EMULATION
 	bool
 
@@ -134,21 +212,6 @@ config HAVE_PROC_CPU
 config NO_IOPORT_MAP
 	bool
 
-config EISA
-	bool
-	---help---
-	  The Extended Industry Standard Architecture (EISA) bus was
-	  developed as an open alternative to the IBM MicroChannel bus.
-
-	  The EISA bus provided some of the features of the IBM MicroChannel
-	  bus while maintaining backward compatibility with cards made for
-	  the older ISA bus.  The EISA bus saw limited use between 1988 and
-	  1995 when it was made obsolete by the PCI bus.
-
-	  Say Y here if you are building a kernel for an EISA-based machine.
-
-	  Otherwise, say N.
-
 config SBUS
 	bool
 
@@ -156,23 +219,10 @@ config STACKTRACE_SUPPORT
 	bool
 	default y
 
-config HAVE_LATENCYTOP_SUPPORT
-	bool
-	depends on !SMP
-	default y
-
 config LOCKDEP_SUPPORT
 	bool
 	default y
 
-config TRACE_IRQFLAGS_SUPPORT
-	bool
-	default y
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default y
-
 config ARCH_HAS_ILOG2_U32
 	bool
 
@@ -182,6 +232,9 @@ config ARCH_HAS_ILOG2_U64
 config ARCH_HAS_BANDGAP
 	bool
 
+config FIX_EARLYCON_MEM
+	def_bool y if MMU
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -193,51 +246,29 @@ config GENERIC_CALIBRATE_DELAY
 config ARCH_MAY_HAVE_PC_FDC
 	bool
 
-config ZONE_DMA
-	bool
-
-config NEED_DMA_MAP_STATE
-       def_bool y
-
 config ARCH_SUPPORTS_UPROBES
 	def_bool y
 
-config ARCH_HAS_DMA_SET_COHERENT_MASK
-	bool
-
 config GENERIC_ISA_DMA
 	bool
 
 config FIQ
 	bool
 
-config NEED_RET_TO_USER
-	bool
-
 config ARCH_MTD_XIP
 	bool
 
-config VECTORS_BASE
-	hex
-	default 0xffff0000 if MMU || CPU_HIGH_VECTOR
-	default DRAM_BASE if REMAP_VECTORS_TO_RAM
-	default 0x00000000
-	help
-	  The base address of exception vectors.  This must be two pages
-	  in size.
-
 config ARM_PATCH_PHYS_VIRT
-	bool "Patch physical to virtual translations at runtime" if EMBEDDED
+	bool "Patch physical to virtual translations at runtime" if !ARCH_MULTIPLATFORM
 	default y
-	depends on !XIP_KERNEL && MMU
-	depends on !ARCH_REALVIEW || !SPARSEMEM
+	depends on MMU
 	help
 	  Patch phys-to-virt and virt-to-phys translation functions at
 	  boot and module load time according to the position of the
 	  kernel in system memory.
 
 	  This can only be used with non-XIP MMU kernels where the base
-	  of physical memory is at a 16MB boundary.
+	  of physical memory is at a 2 MiB boundary.
 
 	  Only disable this option if you know that you do not require
 	  this feature (eg, building a kernel for a single machine) and
@@ -259,22 +290,13 @@ config NEED_MACH_MEMORY_H
 
 config PHYS_OFFSET
 	hex "Physical address of main memory" if MMU
-	depends on !ARM_PATCH_PHYS_VIRT
+	depends on !ARM_PATCH_PHYS_VIRT || !AUTO_ZRELADDR
 	default DRAM_BASE if !MMU
-	default 0x00000000 if ARCH_EBSA110 || \
-			EP93XX_SDCE3_SYNC_PHYS_OFFSET || \
-			ARCH_FOOTBRIDGE || \
-			ARCH_INTEGRATOR || \
-			ARCH_IOP13XX || \
-			ARCH_KS8695 || \
-			(ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
+	default 0x00000000 if ARCH_FOOTBRIDGE
 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
-	default 0x20000000 if ARCH_S5PV210
-	default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
-	default 0xc0000000 if EP93XX_SDCE0_PHYS_OFFSET || ARCH_SA1100
-	default 0xd0000000 if EP93XX_SDCE1_PHYS_OFFSET
-	default 0xe0000000 if EP93XX_SDCE2_PHYS_OFFSET
-	default 0xf0000000 if EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	default 0xa0000000 if ARCH_PXA
+	default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100
+	default 0
 	help
 	  Please provide the physical address corresponding to the
 	  location of main memory in your system.
@@ -283,9 +305,10 @@ config GENERIC_BUG
 	def_bool y
 	depends on BUG
 
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
+config PGTABLE_LEVELS
+	int
+	default 3 if ARM_LPAE
+	default 2
 
 menu "System Type"
 
@@ -296,563 +319,49 @@ config MMU
 	  Select if you want MMU-based virtualised addressing space
 	  support by paged memory management. If unsure, say 'Y'.
 
-#
-# The "ARM system type" choice list is ordered alphabetically by option
-# text.  Please add new entries in the option alphabetic order.
-#
-choice
-	prompt "ARM system type"
-	default ARCH_VERSATILE if !MMU
-	default ARCH_MULTIPLATFORM if MMU
-
-config ARCH_MULTIPLATFORM
-	bool "Allow multiple platforms to be selected"
-	depends on MMU
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_HAS_SG_CHAIN
-	select ARM_PATCH_PHYS_VIRT
-	select AUTO_ZRELADDR
-	select CLKSRC_OF
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
-	select MIGHT_HAVE_PCI
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-	select USE_OF
-
-config ARCH_INTEGRATOR
-	bool "ARM Ltd. Integrator family"
-	select ARM_AMBA
-	select ARM_PATCH_PHYS_VIRT if MMU
-	select AUTO_ZRELADDR
-	select COMMON_CLK
-	select COMMON_CLK_VERSATILE
-	select GENERIC_CLOCKEVENTS
-	select HAVE_TCM
-	select ICST
-	select MULTI_IRQ_HANDLER
-	select PLAT_VERSATILE
-	select SPARSE_IRQ
-	select USE_OF
-	select VERSATILE_FPGA_IRQ
-	help
-	  Support for ARM's Integrator platform.
-
-config ARCH_REALVIEW
-	bool "ARM Ltd. RealView family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select COMMON_CLK
-	select COMMON_CLK_VERSATILE
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PL061 if GPIOLIB
-	select ICST
-	select NEED_MACH_MEMORY_H
-	select PLAT_VERSATILE
-	help
-	  This enables support for ARM Ltd RealView boards.
-
-config ARCH_VERSATILE
-	bool "ARM Ltd. Versatile family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select ARM_VIC
-	select CLKDEV_LOOKUP
-	select GENERIC_CLOCKEVENTS
-	select HAVE_MACH_CLKDEV
-	select ICST
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLOCK
-	select VERSATILE_FPGA_IRQ
-	help
-	  This enables support for ARM Ltd Versatile board.
-
-config ARCH_AT91
-	bool "Atmel AT91"
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select IRQ_DOMAIN
-	select NEED_MACH_IO_H if PCCARD
-	select PINCTRL
-	select PINCTRL_AT91 if USE_OF
-	help
-	  This enables support for systems based on Atmel
-	  AT91RM9200 and AT91SAM9* processors.
-
-config ARCH_CLPS711X
-	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
-	select ARCH_REQUIRE_GPIOLIB
-	select AUTO_ZRELADDR
-	select CLKSRC_MMIO
-	select COMMON_CLK
-	select CPU_ARM720T
-	select GENERIC_CLOCKEVENTS
-	select MFD_SYSCON
-	select SOC_BUS
-	help
-	  Support for Cirrus Logic 711x/721x/731x based boards.
-
-config ARCH_GEMINI
-	bool "Cortina Systems Gemini"
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKSRC_MMIO
-	select CPU_FA526
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for the Cortina Systems Gemini family SoCs
-
-config ARCH_EBSA110
-	bool "EBSA-110"
-	select ARCH_USES_GETTIMEOFFSET
-	select CPU_SA110
-	select ISA
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	select NO_IOPORT_MAP
-	help
-	  This is an evaluation board for the StrongARM processor available
-	  from Digital. It has limited hardware on-board, including an
-	  Ethernet interface, two PCMCIA sockets, two serial ports and a
-	  parallel port.
-
-config ARCH_EFM32
-	bool "Energy Micro efm32"
-	depends on !MMU
-	select ARCH_REQUIRE_GPIOLIB
+config ARM_SINGLE_ARMV7M
+	def_bool !MMU
 	select ARM_NVIC
-	select AUTO_ZRELADDR
-	select CLKSRC_OF
-	select COMMON_CLK
 	select CPU_V7M
-	select GENERIC_CLOCKEVENTS
-	select NO_DMA
 	select NO_IOPORT_MAP
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
-	  processors.
-
-config ARCH_EP93XX
-	bool "EP93xx-based"
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
-	select ARM_AMBA
-	select ARM_VIC
-	select CLKDEV_LOOKUP
-	select CPU_ARM920T
-	help
-	  This enables support for the Cirrus EP93xx series of CPUs.
-
-config ARCH_FOOTBRIDGE
-	bool "FootBridge"
-	select CPU_SA110
-	select FOOTBRIDGE
-	select GENERIC_CLOCKEVENTS
-	select HAVE_IDE
-	select NEED_MACH_IO_H if !MMU
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for systems based on the DC21285 companion chip
-	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
-
-config ARCH_NETX
-	bool "Hilscher NetX based"
-	select ARM_VIC
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	help
-	  This enables support for systems based on the Hilscher NetX Soc
-
-config ARCH_IOP13XX
-	bool "IOP13xx-based"
-	depends on MMU
-	select CPU_XSC3
-	select NEED_MACH_MEMORY_H
-	select NEED_RET_TO_USER
-	select PCI
-	select PLAT_IOP
-	select VMSPLIT_1G
-	select SPARSE_IRQ
-	help
-	  Support for Intel's IOP13XX (XScale) family of processors.
-
-config ARCH_IOP32X
-	bool "IOP32x-based"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_XSCALE
-	select GPIO_IOP
-	select NEED_RET_TO_USER
-	select PCI
-	select PLAT_IOP
-	help
-	  Support for Intel's 80219 and IOP32X (XScale) family of
-	  processors.
-
-config ARCH_IOP33X
-	bool "IOP33x-based"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_XSCALE
-	select GPIO_IOP
-	select NEED_RET_TO_USER
-	select PCI
-	select PLAT_IOP
-	help
-	  Support for Intel's IOP33X (XScale) family of processors.
-
-config ARCH_IXP4XX
-	bool "IXP4xx-based"
-	depends on MMU
-	select ARCH_HAS_DMA_SET_COHERENT_MASK
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_SUPPORTS_BIG_ENDIAN
-	select CLKSRC_MMIO
-	select CPU_XSCALE
-	select DMABOUNCE if PCI
-	select GENERIC_CLOCKEVENTS
-	select MIGHT_HAVE_PCI
-	select NEED_MACH_IO_H
-	select USB_EHCI_BIG_ENDIAN_DESC
-	select USB_EHCI_BIG_ENDIAN_MMIO
-	help
-	  Support for Intel's IXP4XX (XScale) family of processors.
-
-config ARCH_DOVE
-	bool "Marvell Dove"
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_PJ4
-	select GENERIC_CLOCKEVENTS
-	select MIGHT_HAVE_PCI
-	select MVEBU_MBUS
-	select PINCTRL
-	select PINCTRL_DOVE
-	select PLAT_ORION_LEGACY
-	help
-	  Support for the Marvell Dove SoC 88AP510
-
-config ARCH_MV78XX0
-	bool "Marvell MV78xx0"
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_FEROCEON
-	select GENERIC_CLOCKEVENTS
-	select MVEBU_MBUS
-	select PCI
-	select PLAT_ORION_LEGACY
-	help
-	  Support for the following Marvell MV78xx0 series SoCs:
-	  MV781x0, MV782x0.
-
-config ARCH_ORION5X
-	bool "Marvell Orion"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_FEROCEON
-	select GENERIC_CLOCKEVENTS
-	select MVEBU_MBUS
-	select PCI
-	select PLAT_ORION_LEGACY
-	help
-	  Support for the following Marvell Orion 5x series SoCs:
-	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
-	  Orion-2 (5281), Orion-1-90 (6183).
-
-config ARCH_MMP
-	bool "Marvell PXA168/910/MMP2"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select GENERIC_ALLOCATOR
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PXA
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-	select PINCTRL
-	select PLAT_PXA
-	select SPARSE_IRQ
-	help
-	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
-config ARCH_KS8695
-	bool "Micrel/Kendin KS8695"
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKSRC_MMIO
-	select CPU_ARM922T
-	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
-	  System-on-Chip devices.
-
-config ARCH_W90X900
-	bool "Nuvoton W90X900 CPU"
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
-	  At present, the w90x900 has been renamed nuc900, regarding
-	  the ARM series product line, you can login the following
-	  link address to know more.
-
-	  <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
-		ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
-
-config ARCH_LPC32XX
-	bool "NXP LPC32XX"
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_AMBA
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_IDE
-	select USE_OF
-	help
-	  Support for the NXP LPC32XX family of processors
-
-config ARCH_PXA
-	bool "PXA2xx/PXA3xx-based"
-	depends on MMU
-	select ARCH_MTD_XIP
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_CPU_SUSPEND if PM
-	select AUTO_ZRELADDR
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select CLKSRC_OF
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PXA
-	select HAVE_IDE
-	select MULTI_IRQ_HANDLER
-	select PLAT_PXA
-	select SPARSE_IRQ
-	help
-	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-
-config ARCH_MSM
-	bool "Qualcomm MSM (non-multiplatform)"
-	select ARCH_REQUIRE_GPIOLIB
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Qualcomm MSM/QSD based systems.  This runs on the
-	  apps processor of the MSM/QSD and depends on a shared memory
-	  interface to the modem processor which runs the baseband
-	  stack and controls some vital subsystems
-	  (clock and power control, etc).
-
-config ARCH_SHMOBILE_LEGACY
-	bool "Renesas ARM SoCs (non-multiplatform)"
-	select ARCH_SHMOBILE
-	select ARM_PATCH_PHYS_VIRT if MMU
-	select CLKDEV_LOOKUP
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_MACH_CLKDEV
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	select MULTI_IRQ_HANDLER
-	select NO_IOPORT_MAP
-	select PINCTRL
-	select PM_GENERIC_DOMAINS if PM
-	select SH_CLK_CPG
-	select SPARSE_IRQ
-	help
-	  Support for Renesas ARM SoC platforms using a non-multiplatform
-	  kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car
-	  and RZ families.
-
-config ARCH_RPC
-	bool "RiscPC"
-	select ARCH_ACORN
-	select ARCH_MAY_HAVE_PC_FDC
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_USES_GETTIMEOFFSET
-	select CPU_SA110
-	select FIQ
-	select HAVE_IDE
-	select HAVE_PATA_PLATFORM
-	select ISA_DMA_API
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	select NO_IOPORT_MAP
-	select VIRT_TO_BUS
-	help
-	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
-	  CD-ROM interface, serial and parallel port, and the floppy drive.
-
-config ARCH_SA1100
-	bool "SA1100-based"
-	select ARCH_MTD_XIP
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_SPARSEMEM_ENABLE
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select CPU_FREQ
-	select CPU_SA1100
-	select GENERIC_CLOCKEVENTS
-	select HAVE_IDE
-	select ISA
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	help
-	  Support for StrongARM 11x0 based boards.
-
-config ARCH_S3C24XX
-	bool "Samsung S3C24XX SoCs"
-	select ARCH_REQUIRE_GPIOLIB
-	select ATAGS
-	select CLKDEV_LOOKUP
-	select CLKSRC_SAMSUNG_PWM
-	select GENERIC_CLOCKEVENTS
-	select GPIO_SAMSUNG
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select HAVE_S3C_RTC if RTC_CLASS
-	select MULTI_IRQ_HANDLER
-	select NEED_MACH_IO_H
-	select SAMSUNG_ATAGS
-	help
-	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
-	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
-	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
-	  Samsung SMDK2410 development board (and derivatives).
-
-config ARCH_S3C64XX
-	bool "Samsung S3C64XX"
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_AMBA
-	select ARM_VIC
-	select ATAGS
-	select CLKDEV_LOOKUP
-	select CLKSRC_SAMSUNG_PWM
-	select COMMON_CLK_SAMSUNG
-	select CPU_V6K
-	select GENERIC_CLOCKEVENTS
-	select GPIO_SAMSUNG
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select HAVE_TCM
-	select NO_IOPORT_MAP
-	select PLAT_SAMSUNG
-	select PM_GENERIC_DOMAINS if PM
-	select S3C_DEV_NAND
-	select S3C_GPIO_TRACK
-	select SAMSUNG_ATAGS
-	select SAMSUNG_WAKEMASK
-	select SAMSUNG_WDT_RESET
-	help
-	  Samsung S3C64XX series based systems
-
-config ARCH_DAVINCI
-	bool "TI DaVinci"
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select GENERIC_ALLOCATOR
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_CHIP
-	select HAVE_IDE
-	select TI_PRIV_EDMA
-	select USE_OF
-	select ZONE_DMA
-	help
-	  Support for TI's DaVinci platform.
-
-config ARCH_OMAP1
-	bool "TI OMAP1"
-	depends on MMU
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_OMAP
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_CHIP
-	select HAVE_IDE
-	select IRQ_DOMAIN
-	select NEED_MACH_IO_H if PCCARD
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
-
-endchoice
-
-menu "Multiple platform selection"
-	depends on ARCH_MULTIPLATFORM
-
-comment "CPU Core family selection"
-
-config ARCH_MULTI_V4
-	bool "ARMv4 based platforms (FA526)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-	select CPU_FA526
-
-config ARCH_MULTI_V4T
-	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
-		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
-		CPU_ARM925T || CPU_ARM940T)
-
-config ARCH_MULTI_V5
-	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
-		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
-		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
-
-config ARCH_MULTI_V4_V5
-	bool
+config ARCH_MMAP_RND_BITS_MIN
+	default 8
 
-config ARCH_MULTI_V6
-	bool "ARMv6 based platforms (ARM11)"
-	select ARCH_MULTI_V6_V7
-	select CPU_V6K
+config ARCH_MMAP_RND_BITS_MAX
+	default 14 if PAGE_OFFSET=0x40000000
+	default 15 if PAGE_OFFSET=0x80000000
+	default 16
 
-config ARCH_MULTI_V7
-	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
+config ARCH_MULTIPLATFORM
+	bool "Require kernel to be portable to multiple machines" if EXPERT
+	depends on MMU && !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	default y
-	select ARCH_MULTI_V6_V7
-	select CPU_V7
-	select HAVE_SMP
-
-config ARCH_MULTI_V6_V7
-	bool
-	select MIGHT_HAVE_CACHE_L2X0
+	help
+	  In general, all Arm machines can be supported in a single
+	  kernel image, covering either Armv4/v5 or Armv6/v7.
 
-config ARCH_MULTI_CPU_AUTO
-	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
-	select ARCH_MULTI_V5
+	  However, some configuration options require hardcoding machine
+	  specific physical addresses or enable errata workarounds that may
+	  break other machines.
 
-endmenu
+	  Selecting N here allows using those options, including
+	  DEBUG_UNCOMPRESS, XIP_KERNEL and ZBOOT_ROM. If unsure, say Y.
 
-config ARCH_VIRT
-	bool "Dummy Virtual Machine" if ARCH_MULTI_V7
-	select ARM_AMBA
-	select ARM_GIC
-	select ARM_PSCI
-	select HAVE_ARM_ARCH_TIMER
+source "arch/arm/Kconfig.platforms"
 
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
 # Kconfigs may be included either alphabetically (according to the
 # plat- suffix) or along side the corresponding mach-* source.
 #
-source "arch/arm/mach-mvebu/Kconfig"
+source "arch/arm/mach-actions/Kconfig"
+
+source "arch/arm/mach-alpine/Kconfig"
+
+source "arch/arm/mach-artpec/Kconfig"
+
+source "arch/arm/mach-aspeed/Kconfig"
 
 source "arch/arm/mach-at91/Kconfig"
 
@@ -864,14 +373,16 @@ source "arch/arm/mach-berlin/Kconfig"
 
 source "arch/arm/mach-clps711x/Kconfig"
 
-source "arch/arm/mach-cns3xxx/Kconfig"
-
 source "arch/arm/mach-davinci/Kconfig"
 
+source "arch/arm/mach-digicolor/Kconfig"
+
 source "arch/arm/mach-dove/Kconfig"
 
 source "arch/arm/mach-ep93xx/Kconfig"
 
+source "arch/arm/mach-exynos/Kconfig"
+
 source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-gemini/Kconfig"
@@ -880,41 +391,33 @@ source "arch/arm/mach-highbank/Kconfig"
 
 source "arch/arm/mach-hisi/Kconfig"
 
-source "arch/arm/mach-integrator/Kconfig"
-
-source "arch/arm/mach-iop32x/Kconfig"
-
-source "arch/arm/mach-iop33x/Kconfig"
-
-source "arch/arm/mach-iop13xx/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
 
 source "arch/arm/mach-ixp4xx/Kconfig"
 
 source "arch/arm/mach-keystone/Kconfig"
 
-source "arch/arm/mach-ks8695/Kconfig"
+source "arch/arm/mach-lpc32xx/Kconfig"
+
+source "arch/arm/mach-mediatek/Kconfig"
 
 source "arch/arm/mach-meson/Kconfig"
 
-source "arch/arm/mach-msm/Kconfig"
+source "arch/arm/mach-milbeaut/Kconfig"
+
+source "arch/arm/mach-mmp/Kconfig"
 
-source "arch/arm/mach-moxart/Kconfig"
+source "arch/arm/mach-mstar/Kconfig"
 
 source "arch/arm/mach-mv78xx0/Kconfig"
 
-source "arch/arm/mach-imx/Kconfig"
-
-source "arch/arm/mach-mediatek/Kconfig"
+source "arch/arm/mach-mvebu/Kconfig"
 
 source "arch/arm/mach-mxs/Kconfig"
 
-source "arch/arm/mach-netx/Kconfig"
-
 source "arch/arm/mach-nomadik/Kconfig"
 
-source "arch/arm/mach-nspire/Kconfig"
-
-source "arch/arm/plat-omap/Kconfig"
+source "arch/arm/mach-npcm/Kconfig"
 
 source "arch/arm/mach-omap1/Kconfig"
 
@@ -922,71 +425,75 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
-source "arch/arm/mach-picoxcell/Kconfig"
-
 source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
-
-source "arch/arm/mach-mmp/Kconfig"
 
 source "arch/arm/mach-qcom/Kconfig"
 
-source "arch/arm/mach-realview/Kconfig"
+source "arch/arm/mach-realtek/Kconfig"
+
+source "arch/arm/mach-rpc/Kconfig"
 
 source "arch/arm/mach-rockchip/Kconfig"
 
+source "arch/arm/mach-s3c/Kconfig"
+
+source "arch/arm/mach-s5pv210/Kconfig"
+
 source "arch/arm/mach-sa1100/Kconfig"
 
+source "arch/arm/mach-shmobile/Kconfig"
+
 source "arch/arm/mach-socfpga/Kconfig"
 
 source "arch/arm/mach-spear/Kconfig"
 
 source "arch/arm/mach-sti/Kconfig"
 
-source "arch/arm/mach-s3c24xx/Kconfig"
-
-source "arch/arm/mach-s3c64xx/Kconfig"
-
-source "arch/arm/mach-s5pv210/Kconfig"
-
-source "arch/arm/mach-exynos/Kconfig"
-source "arch/arm/plat-samsung/Kconfig"
-
-source "arch/arm/mach-shmobile/Kconfig"
+source "arch/arm/mach-stm32/Kconfig"
 
 source "arch/arm/mach-sunxi/Kconfig"
 
-source "arch/arm/mach-prima2/Kconfig"
-
 source "arch/arm/mach-tegra/Kconfig"
 
-source "arch/arm/mach-u300/Kconfig"
-
 source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
 
-source "arch/arm/mach-vexpress/Kconfig"
-source "arch/arm/plat-versatile/Kconfig"
-
 source "arch/arm/mach-vt8500/Kconfig"
 
-source "arch/arm/mach-w90x900/Kconfig"
-
 source "arch/arm/mach-zynq/Kconfig"
 
+# ARMv7-M architecture
+config ARCH_LPC18XX
+	bool "NXP LPC18xx/LPC43xx"
+	depends on ARM_SINGLE_ARMV7M
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_AMBA
+	select CLKSRC_LPC32XX
+	select PINCTRL
+	help
+	  Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4
+	  high performance microcontrollers.
+
+config ARCH_MPS2
+	bool "ARM MPS2 platform"
+	depends on ARM_SINGLE_ARMV7M
+	select ARM_AMBA
+	select CLKSRC_MPS2
+	help
+	  Support for Cortex-M Prototyping System (or V2M-MPS2) which comes
+	  with a range of available cores like Cortex-M3/M4/M7.
+
+	  Please, note that depends which Application Note is used memory map
+	  for the platform may vary, so adjustment of RAM base might be needed.
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
 
-config PLAT_IOP
-	bool
-	select GENERIC_CLOCKEVENTS
-
 config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
-	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
 
@@ -994,34 +501,19 @@ config PLAT_ORION_LEGACY
 	bool
 	select PLAT_ORION
 
-config PLAT_PXA
-	bool
-
 config PLAT_VERSATILE
 	bool
 
-config ARM_TIMER_SP804
-	bool
-	select CLKSRC_MMIO
-	select CLKSRC_OF if OF
-
-source "arch/arm/firmware/Kconfig"
-
-source arch/arm/mm/Kconfig
+source "arch/arm/mm/Kconfig"
 
 config IWMMXT
 	bool "Enable iWMMXt support"
-	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
-	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
+	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
+	default y if PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
 
-config MULTI_IRQ_HANDLER
-	bool
-	help
-	  Allow each machine to specify it's own IRQ handler at run time.
-
 if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
@@ -1063,7 +555,7 @@ config ARM_ERRATA_430973
 	depends on CPU_V7
 	help
 	  This option enables the workaround for the 430973 Cortex-A8
-	  (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
+	  r1p* erratum. If a code sequence containing an ARM/Thumb
 	  interworking branch is replaced with another code sequence at the
 	  same virtual address, whether due to self-modifying code or virtual
 	  to physical address re-mapping, Cortex-A8 does not recover from the
@@ -1086,7 +578,9 @@ config ARM_ERRATA_458693
 	  hazard might then cause a processor deadlock. The workaround enables
 	  the L1 caching of the NEON accesses and disables the PLD instruction
 	  in the ACTLR register. Note that setting specific bits in the ACTLR
-	  register may not be available in non-secure mode.
+	  register may not be available in non-secure mode and thus is not
+	  available on a multiplatform kernel. This should be applied by the
+	  bootloader instead.
 
 config ARM_ERRATA_460075
 	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
@@ -1099,7 +593,9 @@ config ARM_ERRATA_460075
 	  and overwritten with stale memory contents from external memory. The
 	  workaround disables the write-allocate mode for the L2 cache via the
 	  ACTLR register. Note that setting specific bits in the ACTLR register
-	  may not be available in non-secure mode.
+	  may not be available in non-secure mode and thus is not available on
+	  a multiplatform kernel. This should be applied by the bootloader
+	  instead.
 
 config ARM_ERRATA_742230
 	bool "ARM errata: DMB operation may be faulty"
@@ -1112,7 +608,10 @@ config ARM_ERRATA_742230
 	  ordering of the two writes. This workaround sets a specific bit in
 	  the diagnostic register of the Cortex-A9 which causes the DMB
 	  instruction to behave as a DSB, ensuring the correct behaviour of
-	  the two writes.
+	  the two writes. Note that setting specific bits in the diagnostics
+	  register may not be available in non-secure mode and thus is not
+	  available on a multiplatform kernel. This should be applied by the
+	  bootloader instead.
 
 config ARM_ERRATA_742231
 	bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
@@ -1127,11 +626,15 @@ config ARM_ERRATA_742231
 	  replaced from one of the CPUs at the same time as another CPU is
 	  accessing it. This workaround sets specific bits in the diagnostic
 	  register of the Cortex-A9 which reduces the linefill issuing
-	  capabilities of the processor.
+	  capabilities of the processor. Note that setting specific bits in the
+	  diagnostics register may not be available in non-secure mode and thus
+	  is not available on a multiplatform kernel. This should be applied by
+	  the bootloader instead.
 
 config ARM_ERRATA_643719
 	bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
 	depends on CPU_V7 && SMP
+	default y
 	help
 	  This option enables the workaround for the 643719 Cortex-A9 (prior to
 	  r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR
@@ -1163,7 +666,9 @@ config ARM_ERRATA_743622
 	  register of the Cortex-A9 which disables the Store Buffer
 	  optimisation, preventing the defect from occurring. This has no
 	  visible impact on the overall performance or power consumption of the
-	  processor.
+	  processor. Note that setting specific bits in the diagnostics register
+	  may not be available in non-secure mode and thus is not available on a
+	  multiplatform kernel. This should be applied by the bootloader instead.
 
 config ARM_ERRATA_751472
 	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
@@ -1175,6 +680,10 @@ config ARM_ERRATA_751472
 	  completion of a following broadcasted operation if the second
 	  operation is received by a CPU before the ICIALLUIS has completed,
 	  potentially leading to corrupted entries in the cache or TLB.
+	  Note that setting specific bits in the diagnostics register may
+	  not be available in non-secure mode and thus is not available on
+	  a multiplatform kernel. This should be applied by the bootloader
+	  instead.
 
 config ARM_ERRATA_754322
 	bool "ARM errata: possible faulty MMU translations following an ASID switch"
@@ -1224,12 +733,23 @@ config ARM_ERRATA_764369
 	  relevant cache maintenance functions and sets a specific bit
 	  in the diagnostic control register of the SCU.
 
+config ARM_ERRATA_764319
+	bool "ARM errata: Read to DBGPRSR and DBGOSLSR may generate Undefined instruction"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 764319 Cortex-A9 erratum.
+	  CP14 read accesses to the DBGPRSR and DBGOSLSR registers generate an
+	  unexpected Undefined Instruction exception when the DBGSWENABLE
+	  external pin is set to 0, even when the CP14 accesses are performed
+	  from a privileged mode. This work around catches the exception in a
+	  way the kernel does not stop execution.
+
 config ARM_ERRATA_775420
        bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
        depends on CPU_V7
        help
 	 This option enables the workaround for the 775420 Cortex-A9 (r2p2,
-	 r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
+	 r2p6,r2p8,r2p10,r3p0) erratum. In case a data cache maintenance
 	 operation aborts with MMU exception, it might cause the processor
 	 to deadlock. This workaround puts DSB before executing ISB if
 	 an abort may occur on cache maintenance.
@@ -1253,15 +773,84 @@ config ARM_ERRATA_773022
 	  loop buffer may deliver incorrect instructions. This
 	  workaround disables the loop buffer to avoid the erratum.
 
+config ARM_ERRATA_818325_852422
+	bool "ARM errata: A12: some seqs of opposed cond code instrs => deadlock or corruption"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for:
+	  - Cortex-A12 818325: Execution of an UNPREDICTABLE STR or STM
+	    instruction might deadlock.  Fixed in r0p1.
+	  - Cortex-A12 852422: Execution of a sequence of instructions might
+	    lead to either a data corruption or a CPU deadlock.  Not fixed in
+	    any Cortex-A12 cores yet.
+	  This workaround for all both errata involves setting bit[12] of the
+	  Feature Register. This bit disables an optimisation applied to a
+	  sequence of 2 instructions that use opposing condition codes.
+
+config ARM_ERRATA_821420
+	bool "ARM errata: A12: sequence of VMOV to core registers might lead to a dead lock"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 821420 Cortex-A12
+	  (all revs) erratum. In very rare timing conditions, a sequence
+	  of VMOV to Core registers instructions, for which the second
+	  one is in the shadow of a branch or abort, can lead to a
+	  deadlock when the VMOV instructions are issued out-of-order.
+
+config ARM_ERRATA_825619
+	bool "ARM errata: A12: DMB NSHST/ISHST mixed ... might cause deadlock"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 825619 Cortex-A12
+	  (all revs) erratum. Within rare timing constraints, executing a
+	  DMB NSHST or DMB ISHST instruction followed by a mix of Cacheable
+	  and Device/Strongly-Ordered loads and stores might cause deadlock
+
+config ARM_ERRATA_857271
+	bool "ARM errata: A12: CPU might deadlock under some very rare internal conditions"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 857271 Cortex-A12
+	  (all revs) erratum. Under very rare timing conditions, the CPU might
+	  hang. The workaround is expected to have a < 1% performance impact.
+
+config ARM_ERRATA_852421
+	bool "ARM errata: A17: DMB ST might fail to create order between stores"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 852421 Cortex-A17
+	  (r1p0, r1p1, r1p2) erratum. Under very rare timing conditions,
+	  execution of a DMB ST instruction might fail to properly order
+	  stores from GroupA and stores from GroupB.
+
+config ARM_ERRATA_852423
+	bool "ARM errata: A17: some seqs of opposed cond code instrs => deadlock or corruption"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for:
+	  - Cortex-A17 852423: Execution of a sequence of instructions might
+	    lead to either a data corruption or a CPU deadlock.  Not fixed in
+	    any Cortex-A17 cores yet.
+	  This is identical to Cortex-A12 erratum 852422.  It is a separate
+	  config option from the A12 erratum due to the way errata are checked
+	  for and handled.
+
+config ARM_ERRATA_857272
+	bool "ARM errata: A17: CPU might deadlock under some very rare internal conditions"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 857272 Cortex-A17 erratum.
+	  This erratum is not known to be fixed in any A17 revision.
+	  This is identical to Cortex-A12 erratum 857271.  It is a separate
+	  config option from the A12 erratum due to the way errata are checked
+	  for and handled.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
 
 menu "Bus support"
 
-config ARM_AMBA
-	bool
-
 config ISA
 	bool
 	help
@@ -1271,46 +860,21 @@ config ISA
 	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
 	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
 
-# Select ISA DMA controller support
-config ISA_DMA
-	bool
-	select ISA_DMA_API
-
 # Select ISA DMA interface
 config ISA_DMA_API
 	bool
 
-config PCI
-	bool "PCI support" if MIGHT_HAVE_PCI
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
-config PCI_DOMAINS
-	bool
-	depends on PCI
-
-config PCI_NANOENGINE
-	bool "BSE nanoEngine PCI support"
-	depends on SA1100_NANOENGINE
+config ARM_ERRATA_814220
+	bool "ARM errata: Cache maintenance by set/way operations can execute out of order"
+	depends on CPU_V7
 	help
-	  Enable PCI on the BSE nanoEngine board.
-
-config PCI_SYSCALL
-	def_bool PCI
-
-config PCI_HOST_ITE8152
-	bool
-	depends on PCI && MACH_ARMCORE
-	default y
-	select DMABOUNCE
-
-source "drivers/pci/Kconfig"
-source "drivers/pci/pcie/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
+	  The v7 ARM states that all cache and branch predictor maintenance
+	  operations that do not specify an address execute, relative to
+	  each other, in program order.
+	  However, because of this erratum, an L2 set/way cache maintenance
+	  operation can overtake an L1 set/way cache maintenance operation.
+	  This ERRATA only affected the Cortex-A7 and present in r0p2, r0p3,
+	  r0p4, r0p5.
 
 endmenu
 
@@ -1328,9 +892,9 @@ config HAVE_SMP
 config SMP
 	bool "Symmetric Multi-Processing"
 	depends on CPU_V6K || CPU_V7
-	depends on GENERIC_CLOCKEVENTS
 	depends on HAVE_SMP
 	depends on MMU || ARM_MPU
+	select IRQ_WORK
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
@@ -1342,15 +906,15 @@ config SMP
 	  uniprocessor machines. On a uniprocessor machine, the kernel
 	  will run faster if you say N here.
 
-	  See also <file:Documentation/x86/i386/IO-APIC.txt>,
-	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+	  See also <file:Documentation/arch/x86/i386/IO-APIC.rst>,
+	  <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at
 	  <http://tldp.org/HOWTO/SMP-HOWTO.html>.
 
 	  If you don't know what to do here, say N.
 
 config SMP_ON_UP
-	bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)"
-	depends on SMP && !XIP_KERNEL && MMU
+	bool "Allow booting SMP kernel on uniprocessor systems"
+	depends on SMP && MMU
 	default y
 	help
 	  SMP kernels contain instructions which fail on non-SMP processors.
@@ -1360,48 +924,41 @@ config SMP_ON_UP
 
 	  If you don't know what to do here, say Y.
 
+
+config CURRENT_POINTER_IN_TPIDRURO
+	def_bool y
+	depends on CPU_32v6K && !CPU_V6
+
+config IRQSTACKS
+	def_bool y
+	select HAVE_IRQ_EXIT_ON_IRQ_STACK
+	select HAVE_SOFTIRQ_ON_OWN_STACK
+
 config ARM_CPU_TOPOLOGY
 	bool "Support cpu topology definition"
 	depends on SMP && CPU_V7
+	select ARCH_SUPPORTS_SCHED_MC
+	select ARCH_SUPPORTS_SCHED_SMT
 	default y
 	help
 	  Support ARM cpu topology definition. The MPIDR register defines
 	  affinity between processors which is then used to describe the cpu
 	  topology of an ARM System.
 
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SCHED_SMT
-	bool "SMT scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Improves the CPU scheduler's decision making when dealing with
-	  MultiThreading at a cost of slightly increased overhead in some
-	  places. If unsure say N here.
-
 config HAVE_ARM_SCU
 	bool
 	help
-	  This option enables support for the ARM system coherency unit
+	  This option enables support for the ARM snoop control unit
 
 config HAVE_ARM_ARCH_TIMER
 	bool "Architected timer support"
 	depends on CPU_V7
 	select ARM_ARCH_TIMER
-	select GENERIC_CLOCKEVENTS
 	help
 	  This option enables support for the ARM architected timer
 
 config HAVE_ARM_TWD
 	bool
-	depends on SMP
-	select CLKSRC_OF if OF
 	help
 	  This options enables support for the ARM timer and watchdog unit
 
@@ -1432,8 +989,7 @@ config BIG_LITTLE
 
 config BL_SWITCHER
 	bool "big.LITTLE switcher support"
-	depends on BIG_LITTLE && MCPM && HOTPLUG_CPU
-	select ARM_CPU_SUSPEND
+	depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC
 	select CPU_PM
 	help
 	  The big.LITTLE "switcher" provides the core functionality to
@@ -1460,6 +1016,9 @@ choice
 
 	config VMSPLIT_3G
 		bool "3G/1G user/kernel split"
+	config VMSPLIT_3G_OPT
+		depends on !ARM_LPAE
+		bool "3G/1G user/kernel split (for full 1G low memory)"
 	config VMSPLIT_2G
 		bool "2G/2G user/kernel split"
 	config VMSPLIT_1G
@@ -1471,24 +1030,42 @@ config PAGE_OFFSET
 	default PHYS_OFFSET if !MMU
 	default 0x40000000 if VMSPLIT_1G
 	default 0x80000000 if VMSPLIT_2G
+	default 0xB0000000 if VMSPLIT_3G_OPT
 	default 0xC0000000
 
+config KASAN_SHADOW_OFFSET
+	hex
+	depends on KASAN
+	default 0x1f000000 if PAGE_OFFSET=0x40000000
+	default 0x5f000000 if PAGE_OFFSET=0x80000000
+	default 0x9f000000 if PAGE_OFFSET=0xC0000000
+	default 0x8f000000 if PAGE_OFFSET=0xB0000000
+	default 0xffffffff
+
 config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
-	range 2 32
+	range 2 16 if DEBUG_KMAP_LOCAL
+	range 2 32 if !DEBUG_KMAP_LOCAL
 	depends on SMP
 	default "4"
+	help
+	  The maximum number of CPUs that the kernel can support.
+	  Up to 32 CPUs can be supported, or up to 16 if kmap_local()
+	  debugging is enabled, which uses half of the per-CPU fixmap
+	  slots as guard regions.
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SMP
+	select GENERIC_IRQ_MIGRATION
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
 
 config ARM_PSCI
 	bool "Support for the ARM Power State Coordination Interface (PSCI)"
-	depends on CPU_V7
+	depends on HAVE_ARM_SMCCC
+	select ARM_PSCI_FW
 	help
 	  Say Y here if you want Linux to communicate with system firmware
 	  implementing the PSCI specification for CPU-centric power
@@ -1496,33 +1073,9 @@ config ARM_PSCI
 	  0022A ("Power State Coordination Interface System Software on
 	  ARM processors").
 
-# The GPIO number here must be sorted by descending number. In case of
-# a multiplatform kernel, we just want the highest value required by the
-# selected platforms.
-config ARCH_NR_GPIO
-	int
-	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
-	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
-		SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
-	default 416 if ARCH_SUNXI
-	default 392 if ARCH_U8500
-	default 352 if ARCH_VT8500
-	default 288 if ARCH_ROCKCHIP
-	default 264 if MACH_H4700
-	default 0
-	help
-	  Maximum number of GPIOs in the system.
-
-	  If unsure, leave the default value.
-
-source kernel/Kconfig.preempt
-
 config HZ_FIXED
 	int
-	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
-		ARCH_S5PV210 || ARCH_EXYNOS4
-	default AT91_TIMER_HZ if ARCH_AT91
-	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
+	default 128 if SOC_AT91RM9200
 	default 0
 
 choice
@@ -1566,52 +1119,35 @@ config THUMB2_KERNEL
 	bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY
 	depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K
 	default y if CPU_THUMBONLY
-	select AEABI
-	select ARM_ASM_UNIFIED
 	select ARM_UNWIND
 	help
 	  By enabling this option, the kernel will be compiled in
-	  Thumb-2 mode. A compiler/assembler that understand the unified
-	  ARM-Thumb syntax is needed.
+	  Thumb-2 mode.
 
 	  If unsure, say N.
 
-config THUMB2_AVOID_R_ARM_THM_JUMP11
-	bool "Work around buggy Thumb-2 short branch relocations in gas"
-	depends on THUMB2_KERNEL && MODULES
+config ARM_PATCH_IDIV
+	bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
+	depends on CPU_32v7
 	default y
 	help
-	  Various binutils versions can resolve Thumb-2 branches to
-	  locally-defined, preemptible global symbols as short-range "b.n"
-	  branch instructions.
+	  The ARM compiler inserts calls to __aeabi_idiv() and
+	  __aeabi_uidiv() when it needs to perform division on signed
+	  and unsigned integers. Some v7 CPUs have support for the sdiv
+	  and udiv instructions that can be used to implement those
+	  functions.
 
-	  This is a problem, because there's no guarantee the final
-	  destination of the symbol, or any candidate locations for a
-	  trampoline, are within range of the branch.  For this reason, the
-	  kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
-	  relocation in modules at all, and it makes little sense to add
-	  support.
-
-	  The symptom is that the kernel fails with an "unsupported
-	  relocation" error when loading some modules.
-
-	  Until fixed tools are available, passing
-	  -fno-optimize-sibling-calls to gcc should prevent gcc generating
-	  code which hits this problem, at the cost of a bit of extra runtime
-	  stack usage in some cases.
-
-	  The problem is described in more detail at:
-	      https://bugs.launchpad.net/binutils-linaro/+bug/725126
-
-	  Only Thumb-2 kernels are affected.
-
-	  Unless you are sure your tools don't have this problem, say Y.
-
-config ARM_ASM_UNIFIED
-	bool
+	  Enabling this option allows the kernel to modify itself to
+	  replace the first two instructions of these library functions
+	  with the sdiv or udiv plus "bx lr" instructions when the CPU
+	  it is running on supports them. Typically this will be faster
+	  and less power intensive than running the original library
+	  code to do integer division.
 
 config AEABI
-	bool "Use the ARM EABI to compile the kernel"
+	bool "Use the ARM EABI to compile the kernel" if !CPU_V7 && \
+		!CPU_V7M && !CPU_V6 && !CPU_V6K && !CC_IS_CLANG
+	default CPU_V7 || CPU_V7M || CPU_V6 || CPU_V6K || CC_IS_CLANG
 	help
 	  This option allows for the kernel to be compiled using the latest
 	  ARM ABI (aka EABI).  This is only useful if you are using a user
@@ -1646,28 +1182,21 @@ config OABI_COMPAT
 	  UNPREDICTABLE (in fact it can be predicted that it won't work
 	  at all). If in doubt say N.
 
-config ARCH_HAS_HOLES_MEMORYMODEL
-	bool
-
-config ARCH_SPARSEMEM_ENABLE
-	bool
-
-config ARCH_SPARSEMEM_DEFAULT
-	def_bool ARCH_SPARSEMEM_ENABLE
-
 config ARCH_SELECT_MEMORY_MODEL
-	def_bool ARCH_SPARSEMEM_ENABLE
+	def_bool y
 
-config HAVE_ARCH_PFN_VALID
-	def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
+config ARCH_FLATMEM_ENABLE
+	def_bool !(ARCH_RPC || ARCH_SA1100)
 
-config HAVE_GENERIC_RCU_GUP
-	def_bool y
-	depends on ARM_LPAE
+config ARCH_SPARSEMEM_ENABLE
+	def_bool !ARCH_FOOTBRIDGE
+	select SPARSEMEM_STATIC if SPARSEMEM
 
 config HIGHMEM
 	bool "High Memory Support"
 	depends on MMU
+	select KMAP_LOCAL
+	select KMAP_LOCAL_NON_LINEAR_PTE_ARRAY
 	help
 	  The address space of ARM processors is only 4 Gigabytes large
 	  and it has to accommodate user address space, kernel address
@@ -1683,51 +1212,86 @@ config HIGHMEM
 	  If unsure, say n.
 
 config HIGHPTE
-	bool "Allocate 2nd-level pagetables from highmem"
-	depends on HIGHMEM
-
-config HW_PERF_EVENTS
-	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS
+	bool "Allocate 2nd-level pagetables from highmem" if EXPERT
+	depends on HIGHMEM && !PREEMPT_RT
 	default y
 	help
-	  Enable hardware performance counter support for perf events. If
-	  disabled, perf events will use software events only.
+	  The VM uses one page of physical memory for each page table.
+	  For systems with a lot of processes, this can use a lot of
+	  precious low memory, eventually leading to low memory being
+	  consumed by page tables.  Setting this option will allow
+	  user-space 2nd level page tables to reside in high memory.
 
-config SYS_SUPPORTS_HUGETLBFS
-       def_bool y
-       depends on ARM_LPAE
+config ARM_PAN
+	bool "Enable privileged no-access"
+	depends on MMU
+	default y
+	help
+	  Increase kernel security by ensuring that normal kernel accesses
+	  are unable to access userspace addresses.  This can help prevent
+	  use-after-free bugs becoming an exploitable privilege escalation
+	  by ensuring that magic values (such as LIST_POISON) will always
+	  fault when dereferenced.
 
-config HAVE_ARCH_TRANSPARENT_HUGEPAGE
-       def_bool y
-       depends on ARM_LPAE
+	  The implementation uses CPU domains when !CONFIG_ARM_LPAE and
+	  disabling of TTBR0 page table walks with CONFIG_ARM_LPAE.
 
-config ARCH_WANT_GENERAL_HUGETLB
+config CPU_SW_DOMAIN_PAN
 	def_bool y
+	depends on ARM_PAN && !ARM_LPAE
+	help
+	  Enable use of CPU domains to implement privileged no-access.
 
-source "mm/Kconfig"
+	  CPUs with low-vector mappings use a best-efforts implementation.
+	  Their lower 1MB needs to remain accessible for the vectors, but
+	  the remainder of userspace will become appropriately inaccessible.
 
-config FORCE_MAX_ZONEORDER
-	int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
-	range 11 64 if ARCH_SHMOBILE_LEGACY
-	default "12" if SOC_AM33XX
-	default "9" if SA1111 || ARCH_EFM32
-	default "11"
+config CPU_TTBR0_PAN
+	def_bool y
+	depends on ARM_PAN && ARM_LPAE
 	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
+	  Enable privileged no-access by disabling TTBR0 page table walks when
+	  running in kernel mode.
+
+config HW_PERF_EVENTS
+	def_bool y
+	depends on ARM_PMU
 
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
+config ARM_MODULE_PLTS
+	bool "Use PLTs to allow module memory to spill over into vmalloc area"
+	depends on MODULES
+	select KASAN_VMALLOC if KASAN
+	default y
+	help
+	  Allocate PLTs when loading modules so that jumps and calls whose
+	  targets are too far away for their relative offsets to be encoded
+	  in the instructions themselves can be bounced via veneers in the
+	  module's PLT. This allows modules to be allocated in the generic
+	  vmalloc area after the dedicated module memory area has been
+	  exhausted. The modules will use slightly more memory, but after
+	  rounding up to page size, the actual memory footprint is usually
+	  the same.
+
+	  Disabling this is usually safe for small single-platform
+	  configurations. If unsure, say y.
+
+config ARCH_FORCE_MAX_ORDER
+	int "Order of maximal physically contiguous allocations"
+	default "11" if SOC_AM33XX
+	default "8" if SA1111
+	default "10"
+	help
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
+
+	  Don't change if unsure.
 
 config ALIGNMENT_TRAP
-	bool
-	depends on CPU_CP15_MMU
-	default y if !ARCH_EBSA110
+	def_bool CPU_CP15_MMU
 	select HAVE_PROC_CPU if PROC_FS
 	help
 	  ARM processors cannot fetch/store information which is not
@@ -1754,25 +1318,23 @@ config UACCESS_WITH_MEMCPY
 	  However, if the CPU data cache is using a write-allocate mode,
 	  this option is unlikely to provide any performance gain.
 
-config SECCOMP
-	bool
-	prompt "Enable seccomp to safely compute untrusted bytecode"
-	---help---
-	  This kernel feature is useful for number crunching applications
-	  that may need to compute untrusted bytecode during their
-	  execution. By using pipes or other transports made available to
-	  the process as file descriptors supporting the read/write
-	  syscalls, it's possible to isolate those applications in
-	  their own address space using seccomp. Once seccomp is
-	  enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
-	  and the task is only allowed to execute a few safe syscalls
-	  defined by each seccomp mode.
-
-config SWIOTLB
-	def_bool y
+config PARAVIRT
+	bool "Enable paravirtualization code"
+	help
+	  This changes the kernel so it can modify itself when it is run
+	  under a hypervisor, potentially improving performance significantly
+	  over full virtualization.
 
-config IOMMU_HELPER
-	def_bool SWIOTLB
+config PARAVIRT_TIME_ACCOUNTING
+	bool "Paravirtual steal time accounting"
+	select PARAVIRT
+	help
+	  Select this option to enable fine granularity task steal time
+	  accounting. Time spent executing other tasks in parallel with
+	  the current vCPU is discounted from the vCPU power. To account for
+	  that, there can be a small performance impact.
+
+	  If in doubt, say N here.
 
 config XEN_DOM0
 	def_bool y
@@ -1786,10 +1348,30 @@ config XEN
 	depends on MMU
 	select ARCH_DMA_ADDR_T_64BIT
 	select ARM_PSCI
+	select SWIOTLB
 	select SWIOTLB_XEN
+	select PARAVIRT
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
+config CC_HAVE_STACKPROTECTOR_TLS
+	def_bool $(cc-option,-mtp=cp15 -mstack-protector-guard=tls -mstack-protector-guard-offset=0)
+
+config STACKPROTECTOR_PER_TASK
+	bool "Use a unique stack canary value for each task"
+	depends on STACKPROTECTOR && CURRENT_POINTER_IN_TPIDRURO && !XIP_DEFLATED_DATA
+	depends on CC_HAVE_STACKPROTECTOR_TLS
+	default y
+	help
+	  Due to the fact that GCC uses an ordinary symbol reference from
+	  which to load the value of the stack canary, this value can only
+	  change at reboot time on SMP systems, and all tasks running in the
+	  kernel's address space are forced to use the same canary value for
+	  the entire duration that the system is up.
+
+	  Enable this option to switch to a different method that uses a
+	  different canary value for each task.
+
 endmenu
 
 menu "Boot options"
@@ -1798,20 +1380,20 @@ config USE_OF
 	bool "Flattened Device Tree support"
 	select IRQ_DOMAIN
 	select OF
-	select OF_EARLY_FLATTREE
-	select OF_RESERVED_MEM
 	help
 	  Include support for flattened device tree machine descriptions.
 
+config ARCH_WANT_FLAT_DTB_INSTALL
+	def_bool y
+
 config ATAGS
-	bool "Support for the traditional ATAGS boot data passing" if USE_OF
+	bool "Support for the traditional ATAGS boot data passing"
 	default y
 	help
 	  This is the traditional way of passing data to the kernel at boot
 	  time. If you are solely relying on the flattened device tree (or
 	  the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
-	  to remove ATAGS support from your kernel binary.  If unsure,
-	  leave this to y.
+	  to remove ATAGS support from your kernel binary.
 
 config DEPRECATED_PARAM_STRUCT
 	bool "Provide old way to pass kernel parameters"
@@ -1824,7 +1406,7 @@ config DEPRECATED_PARAM_STRUCT
 # TEXT and BSS so we preserve their values in the config files.
 config ZBOOT_ROM_TEXT
 	hex "Compressed ROM boot loader base address"
-	default "0"
+	default 0x0
 	help
 	  The physical address at which the ROM-able zImage is to be
 	  placed in the target.  Platforms which normally make use of
@@ -1835,7 +1417,7 @@ config ZBOOT_ROM_TEXT
 
 config ZBOOT_ROM_BSS
 	hex "Compressed ROM boot loader BSS address"
-	default "0"
+	default 0x0
 	help
 	  The base address of an area of read/write memory in the target
 	  for the ROM-able zImage which must be available while the
@@ -1854,35 +1436,6 @@ config ZBOOT_ROM
 	  Say Y here if you intend to execute your compressed kernel image
 	  (zImage) directly from ROM or flash.  If unsure, say N.
 
-choice
-	prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)"
-	depends on ZBOOT_ROM && ARCH_SH7372
-	default ZBOOT_ROM_NONE
-	help
-	  Include experimental SD/MMC loading code in the ROM-able zImage.
-	  With this enabled it is possible to write the ROM-able zImage
-	  kernel image to an MMC or SD card and boot the kernel straight
-	  from the reset vector. At reset the processor Mask ROM will load
-	  the first part of the ROM-able zImage which in turn loads the
-	  rest the kernel image to RAM.
-
-config ZBOOT_ROM_NONE
-	bool "No SD/MMC loader in zImage (EXPERIMENTAL)"
-	help
-	  Do not load image from SD or MMC
-
-config ZBOOT_ROM_MMCIF
-	bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
-	help
-	  Load image from MMCIF hardware block.
-
-config ZBOOT_ROM_SH_MOBILE_SDHI
-	bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)"
-	help
-	  Load image from SDHI hardware block
-
-endchoice
-
 config ARM_APPENDED_DTB
 	bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
 	depends on OF
@@ -1916,7 +1469,8 @@ config ARM_ATAG_DTB_COMPAT
 	  from the ATAG list and store it at run time into the appended DTB.
 
 choice
-	prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT
+	prompt "Kernel command line type"
+	depends on ARM_ATAG_DTB_COMPAT
 	default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
 
 config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
@@ -1938,16 +1492,16 @@ config CMDLINE
 	string "Default kernel command string"
 	default ""
 	help
-	  On some architectures (EBSA110 and CATS), there is currently no way
+	  On some architectures (e.g. CATS), there is currently no way
 	  for the boot loader to pass arguments to the kernel. For these
 	  architectures, you should supply some command-line options at build
 	  time by entering them here. As a minimum, you should specify the
 	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
 
 choice
-	prompt "Kernel command line type" if CMDLINE != ""
+	prompt "Kernel command line type"
+	depends on CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
-	depends on ATAGS
 
 config CMDLINE_FROM_BOOTLOADER
 	bool "Use bootloader kernel arguments if available"
@@ -1974,6 +1528,7 @@ endchoice
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
 	depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
+	depends on !ARM_PATCH_IDIV && !ARM_PATCH_PHYS_VIRT && !SMP_ON_UP
 	help
 	  Execute-In-Place allows the kernel to run from non-volatile storage
 	  directly addressable by the CPU, such as NOR flash. This saves RAM
@@ -2001,18 +1556,19 @@ config XIP_PHYS_ADDR
 	  be linked for and stored to.  This address is dependent on your
 	  own flash usage.
 
-config KEXEC
-	bool "Kexec system call (EXPERIMENTAL)"
-	depends on (!SMP || PM_SLEEP_SMP)
+config XIP_DEFLATED_DATA
+	bool "Store kernel .data section compressed in ROM"
+	depends on XIP_KERNEL
+	select ZLIB_INFLATE
 	help
-	  kexec is a system call that implements the ability to shutdown your
-	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is independent of the system firmware.   And like a reboot
-	  you can start any kernel with it, not just Linux.
+	  Before the kernel is actually executed, its .data section has to be
+	  copied to RAM from ROM. This option allows for storing that data
+	  in compressed form and decompressed to RAM rather than merely being
+	  copied, saving some precious ROM space. A possible drawback is a
+	  slightly longer boot delay.
 
-	  It is an ongoing process to be certain the hardware in a machine
-	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.
+config ARCH_SUPPORTS_KEXEC
+	def_bool (!SMP || PM_SLEEP_SMP) && MMU
 
 config ATAGS_PROC
 	bool "Export atags in procfs"
@@ -2022,26 +1578,58 @@ config ATAGS_PROC
 	  Should the atags used to boot the kernel be exported in an "atags"
 	  file in procfs. Useful with kexec.
 
-config CRASH_DUMP
-	bool "Build kdump crash kernel (EXPERIMENTAL)"
-	help
-	  Generate crash dump after being started by kexec. This should
-	  be normally only set in special crash dump kernels which are
-	  loaded in the main kernel with kexec-tools into a specially
-	  reserved region and then later executed after a crash by
-	  kdump/kexec. The crash dump kernel must be compiled to a
-	  memory address not used by the main kernel
+config ARCH_SUPPORTS_CRASH_DUMP
+	def_bool y
 
-	  For more details see Documentation/kdump/kdump.txt
+config ARCH_DEFAULT_CRASH_DUMP
+	def_bool y
 
 config AUTO_ZRELADDR
-	bool "Auto calculation of the decompressed kernel image address"
+	bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM
+	default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	help
 	  ZRELADDR is the physical address where the decompressed kernel
 	  image will be placed. If AUTO_ZRELADDR is selected, the address
-	  will be determined at run-time by masking the current IP with
-	  0xf8000000. This assumes the zImage being placed in the first 128MB
-	  from start of memory.
+	  will be determined at run-time, either by masking the current IP
+	  with 0xf8000000, or, if invalid, from the DTB passed in r2.
+	  This assumes the zImage being placed in the first 128MB from
+	  start of memory.
+
+config EFI_STUB
+	bool
+
+config EFI
+	bool "UEFI runtime support"
+	depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL
+	select UCS2_STRING
+	select EFI_PARAMS_FROM_FDT
+	select EFI_STUB
+	select EFI_GENERIC_STUB
+	select EFI_RUNTIME_WRAPPERS
+	help
+	  This option provides support for runtime services provided
+	  by UEFI firmware (such as non-volatile variables, realtime
+	  clock, and platform reset). A UEFI stub is also provided to
+	  allow the kernel to be booted as an EFI application. This
+	  is only useful for kernels that may run on systems that have
+	  UEFI firmware.
+
+config DMI
+	bool "Enable support for SMBIOS (DMI) tables"
+	depends on EFI
+	default y
+	help
+	  This enables SMBIOS/DMI feature for systems.
+
+	  This option is only useful on systems that have UEFI firmware.
+	  However, even with this option, the resultant kernel should
+	  continue to boot on existing non-UEFI platforms.
+
+	  NOTE: This does *NOT* enable or encourage the use of DMI quirks,
+	  i.e., the the practice of identifying the platform via DMI to
+	  decide whether certain workarounds for buggy hardware and/or
+	  firmware need to be enabled. This would require the DMI subsystem
+	  to be enabled much earlier than we do on ARM, which is non-trivial.
 
 endmenu
 
@@ -2060,7 +1648,7 @@ comment "At least one emulation must be selected"
 config FPE_NWFPE
 	bool "NWFPE math emulation"
 	depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
-	---help---
+	help
 	  Say Y to include the NWFPE floating point emulator in the kernel.
 	  This is necessary to run most binaries. Linux does not currently
 	  support floating point hardware so you need to say Y here even if
@@ -2084,7 +1672,7 @@ config FPE_NWFPE_XP
 config FPE_FASTFPE
 	bool "FastFPE math emulation (EXPERIMENTAL)"
 	depends on (!AEABI || OABI_COMPAT) && !CPU_32v3
-	---help---
+	help
 	  Say Y here to include the FAST floating point emulator in the kernel.
 	  This is an experimental much faster emulator which now also has full
 	  precision for the mantissa.  It does not support any exceptions.
@@ -2102,7 +1690,7 @@ config VFP
 	  Say Y to include VFP support code in the kernel. This is needed
 	  if your hardware includes a VFP unit.
 
-	  Please see <file:Documentation/arm/VFP/release-notes.txt> for
+	  Please see <file:Documentation/arch/arm/vfp/release-notes.rst> for
 	  release notes and additional status information.
 
 	  Say N if your target does not have VFP hardware.
@@ -2127,22 +1715,6 @@ config KERNEL_MODE_NEON
 
 endmenu
 
-menu "Userspace binary formats"
-
-source "fs/Kconfig.binfmt"
-
-config ARTHUR
-	tristate "RISC OS personality"
-	depends on !AEABI
-	help
-	  Say Y here to include the kernel code necessary if you want to run
-	  Acorn RISC OS/Arthur binaries under Linux. This code is still very
-	  experimental; if this sounds frightening, say N and sleep in peace.
-	  You can also say M here to compile this support as a module (which
-	  will be called arthur).
-
-endmenu
-
 menu "Power management options"
 
 source "kernel/power/Kconfig"
@@ -2153,7 +1725,8 @@ config ARCH_SUSPEND_POSSIBLE
 	def_bool y
 
 config ARM_CPU_SUSPEND
-	def_bool PM_SLEEP
+	def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW
+	depends on ARCH_SUSPEND_POSSIBLE
 
 config ARCH_HIBERNATION_POSSIBLE
 	bool
@@ -2161,19 +1734,3 @@ config ARCH_HIBERNATION_POSSIBLE
 	default y if ARCH_SUSPEND_POSSIBLE
 
 endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/arm/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
-source "arch/arm/kvm/Kconfig"
diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu
index aed66d5df7f1..36c80d3dd93f 100644
--- a/arch/arm/Kconfig-nommu
+++ b/arch/arm/Kconfig-nommu
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # Kconfig for uClinux(non-paged MM) depend configurations
 # Hyok S. Choi <hyok.choi@samsung.com>
@@ -19,10 +20,12 @@ config DRAM_SIZE
 
 config FLASH_MEM_BASE
 	hex 'FLASH Base Address' if SET_MEM_PARAM
+	depends on CPU_ARM740T || CPU_ARM946E || CPU_ARM940T
 	default 0x00400000
 
 config FLASH_SIZE
 	hex 'FLASH Size' if SET_MEM_PARAM
+	depends on CPU_ARM740T || CPU_ARM946E || CPU_ARM940T
 	default 0x00400000
 
 config PROCESSOR_ID
@@ -34,8 +37,7 @@ config PROCESSOR_ID
 	  used instead of the auto-probing which utilizes the register.
 
 config REMAP_VECTORS_TO_RAM
-	bool 'Install vectors to the beginning of RAM' if DRAM_BASE
-	depends on DRAM_BASE
+	bool 'Install vectors to the beginning of RAM'
 	help
 	  The kernel needs to change the hardware exception vectors.
 	  In nommu mode, the hardware exception vectors are normally
@@ -53,8 +55,8 @@ config REMAP_VECTORS_TO_RAM
 
 config ARM_MPU
        bool 'Use the ARM v7 PMSA Compliant MPU'
-       depends on CPU_V7
-       default y
+       depends on CPU_V7 || CPU_V7M
+       default y if CPU_V7
        help
          Some ARM systems without an MMU have instead a Memory Protection
          Unit (MPU) that defines the type and permissions for regions of
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 03dc4c1a8736..366f162e147d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1,12 +1,15 @@
-menu "Kernel hacking"
+# SPDX-License-Identifier: GPL-2.0
 
-source "lib/Kconfig.debug"
+config ARM_PTDUMP_CORE
+	def_bool n
 
-config ARM_PTDUMP
+config ARM_PTDUMP_DEBUGFS
 	bool "Export kernel pagetable layout to userspace via debugfs"
 	depends on DEBUG_KERNEL
+	depends on MMU
+	select ARM_PTDUMP_CORE
 	select DEBUG_FS
-	---help---
+	help
 	  Say Y here if you want to show the kernel pagetable layout in a
 	  debugfs file. This information is only useful for kernel developers
 	  who are working in architecture specific areas of the kernel.
@@ -14,49 +17,78 @@ config ARM_PTDUMP
 	  kernel.
 	  If in doubt, say "N"
 
-config STRICT_DEVMEM
-	bool "Filter access to /dev/mem"
+config ARM_DEBUG_WX
+	bool "Warn on W+X mappings at boot"
 	depends on MMU
-	---help---
-	  If this option is disabled, you allow userspace (root) access to all
-	  of memory, including kernel and userspace memory. Accidental
-	  access to this is obviously disastrous, but specific access can
-	  be used by people debugging the kernel.
-
-	  If this option is switched on, the /dev/mem file only allows
-	  userspace access to memory mapped peripherals.
-
-          If in doubt, say Y.
-
-# RMK wants arm kernels compiled with frame pointers or stack unwinding.
-# If you know what you are doing and are willing to live without stack
-# traces, you can get a slightly smaller kernel by setting this option to
-# n, but then RMK will have to kill you ;).
-config FRAME_POINTER
-	bool
+	select ARM_PTDUMP_CORE
+	help
+		Generate a warning if any W+X mappings are found at boot.
+
+		This is useful for discovering cases where the kernel is leaving
+		W+X mappings after applying NX, as such mappings are a security risk.
+
+		Look for a message in dmesg output like this:
+
+			arm/mm: Checked W+X mappings: passed, no W+X pages found.
+
+		or like this, if the check failed:
+
+			arm/mm: Checked W+X mappings: FAILED, <N> W+X pages found.
+
+		Note that even if the check fails, your kernel is possibly
+		still fine, as W+X mappings are not a security hole in
+		themselves, what they do is that they make the exploitation
+		of other unfixed kernel bugs easier.
+
+		There is no runtime or memory usage effect of this option
+		once the kernel has booted up - it's a one time check.
+
+		If in doubt, say "Y".
+
+choice
+	prompt "Choose kernel unwinder"
+	default UNWINDER_ARM if AEABI
+	default UNWINDER_FRAME_POINTER if !AEABI
+	help
+	  This determines which method will be used for unwinding kernel stack
+	  traces for panics, oopses, bugs, warnings, perf, /proc/<pid>/stack,
+	  livepatch, lockdep, and more.
+
+config UNWINDER_FRAME_POINTER
+	bool "Frame pointer unwinder"
 	depends on !THUMB2_KERNEL
-	default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
+	select ARCH_WANT_FRAME_POINTERS
+	select FRAME_POINTER
 	help
-	  If you say N here, the resulting kernel will be slightly smaller and
-	  faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
-	  when a problem occurs with the kernel, the information that is
-	  reported is severely limited.
+	  This option enables the frame pointer unwinder for unwinding
+	  kernel stack traces.
 
-config ARM_UNWIND
-	bool "Enable stack unwinding support (EXPERIMENTAL)"
+config UNWINDER_ARM
+	bool "ARM EABI stack unwinder"
 	depends on AEABI
-	default y
+	select ARM_UNWIND
 	help
 	  This option enables stack unwinding support in the kernel
 	  using the information automatically generated by the
 	  compiler. The resulting kernel image is slightly bigger but
 	  the performance is not affected. Currently, this feature
-	  only works with EABI compilers. If unsure say Y.
+	  only works with EABI compilers.
 
-config OLD_MCOUNT
+endchoice
+
+config ARM_UNWIND
 	bool
-	depends on FUNCTION_TRACER && FRAME_POINTER
-	default y
+
+config BACKTRACE_VERBOSE
+	bool "Verbose backtrace"
+	depends on EXPERT
+	help
+	  When the kernel produces a warning or oops, the kernel prints a
+	  trace of the call chain. This option controls whether we include
+	  the numeric addresses or only include the symbolic information.
+
+	  In most cases, say N here, unless you are intending to debug the
+	  kernel and have access to the kernel binary image.
 
 config DEBUG_USER
 	bool "Verbose user fault messages"
@@ -93,28 +125,140 @@ choice
 	prompt "Kernel low-level debugging port"
 	depends on DEBUG_LL
 
-	config AT91_DEBUG_LL_DBGU0
-		bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
-		depends on HAVE_AT91_DBGU0
+	config DEBUG_ALPINE_UART0
+		bool "Kernel low-level debugging messages via Alpine UART0"
+		depends on ARCH_ALPINE
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Alpine based platforms.
+
+	config DEBUG_ASM9260_UART
+		bool "Kernel low-level debugging via asm9260 UART"
+		depends on MACH_ASM9260
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to an UART or USART port on asm9260 based
+		  machines.
+
+		    DEBUG_UART_PHYS | DEBUG_UART_VIRT
+
+		    0x80000000      | 0xf0000000     | UART0
+		    0x80004000      | 0xf0004000     | UART1
+		    0x80008000      | 0xf0008000     | UART2
+		    0x8000c000      | 0xf000c000     | UART3
+		    0x80010000      | 0xf0010000     | UART4
+		    0x80014000      | 0xf0014000     | UART5
+		    0x80018000      | 0xf0018000     | UART6
+		    0x8001c000      | 0xf001c000     | UART7
+		    0x80020000      | 0xf0020000     | UART8
+		    0x80024000      | 0xf0024000     | UART9
+
+	config DEBUG_AT91_RM9200_DBGU
+		bool "Kernel low-level debugging on AT91RM9200, AT91SAM9, SAM9X60 DBGU"
+		select DEBUG_AT91_UART
+		depends on SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the DBGU port of:
+		    at91rm9200, at91sam9260, at91sam9g20, at91sam9261,
+		    at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5, sam9x60
+
+	config DEBUG_AT91_SAM9263_DBGU
+		bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU"
+		select DEBUG_AT91_UART
+		depends on SOC_AT91SAM9 || SOC_SAMA5D3
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the DBGU port of:
+		    at91sam9263, at91sam9g45, at91sam9m10,
+		    sama5d3
+
+	config DEBUG_AT91_SAMA5D2_UART1
+		bool "Kernel low-level debugging on SAMA5D2 UART1"
+		select DEBUG_AT91_UART
+		depends on SOC_SAMA5D2
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the UART1 port of sama5d2.
+
+	config DEBUG_AT91_SAMA5D4_USART3
+		bool "Kernel low-level debugging on SAMA5D4 USART3"
+		select DEBUG_AT91_UART
+		depends on SOC_SAMA5D4
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the USART3 port of sama5d4.
+
+	config DEBUG_AT91_SAMV7_USART1
+		bool "Kernel low-level debugging via SAMV7 USART1"
+		select DEBUG_AT91_UART
+		depends on SOC_SAMV7
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the USART1 port on SAMV7 based
+		  machines.
+
+	config DEBUG_AT91_SAMA7G5_FLEXCOM3
+		bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3"
+		select DEBUG_AT91_UART
+		depends on SOC_SAMA7G5
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the FLEXCOM3 port of SAMA7G5.
+
+	config DEBUG_AT91_LAN966_FLEXCOM
+		bool "Kernel low-level debugging on LAN966 FLEXCOM USART"
+		select DEBUG_AT91_UART
+		depends on SOC_LAN966
+		help
+		Say Y here if you want kernel low-level debugging support
+		on the FLEXCOM port of LAN966.
+
+		DEBUG_UART_PHYS | DEBUG_UART_VIRT
 
-	config AT91_DEBUG_LL_DBGU1
-		bool "Kernel low-level debugging on 9263 and 9g45"
-		depends on HAVE_AT91_DBGU1
+		0xe0040200      | 0xfd040200     | FLEXCOM0
+		0xe0044200      | 0xfd044200     | FLEXCOM1
+		0xe0060200      | 0xfd060200     | FLEXCOM2
+		0xe0064200      | 0xfd064200     | FLEXCOM3
+		0xe0070200      | 0xfd070200     | FLEXCOM4
 
-	config AT91_DEBUG_LL_DBGU2
-		bool "Kernel low-level debugging on sama5d4"
-		depends on HAVE_AT91_DBGU2
+		By default, enabling FLEXCOM3 port. Based on requirement, use
+		DEBUG_UART_PHYS and DEBUG_UART_VIRT configurations from above
+		table.
 
 	config DEBUG_BCM2835
 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
-		depends on ARCH_BCM2835
+		depends on ARCH_BCM2835 && ARCH_MULTI_V6
 		select DEBUG_UART_PL01X
 
-	config DEBUG_BCM_5301X
-		bool "Kernel low-level debugging on BCM5301X UART1"
-		depends on ARCH_BCM_5301X
+	config DEBUG_BCM2836
+		bool "Kernel low-level debugging on BCM2836 PL011 UART"
+		depends on ARCH_BCM2835 && ARCH_MULTI_V7
 		select DEBUG_UART_PL01X
 
+	config DEBUG_BCM_5301X
+		bool "Kernel low-level debugging on BCM5301X/NSP UART1"
+		depends on ARCH_BCM_5301X || ARCH_BCM_NSP
+		select DEBUG_UART_8250
+
+	config DEBUG_BCMBCA
+		bool "Kernel low-level debugging on BCMBCA UART0"
+		depends on ARCH_BCMBCA
+
+	config DEBUG_BCM_HR2
+		bool "Kernel low-level debugging on Hurricane 2 UART2"
+		depends on ARCH_BCM_HR2
+		select DEBUG_UART_8250
+
+	config DEBUG_BCM_IPROC_UART3
+		bool "Kernel low-level debugging on BCM IPROC UART3"
+		depends on ARCH_BCM_CYGNUS
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the third serial port on these devices.
+
 	config DEBUG_BCM_KONA_UART
 		bool "Kernel low-level debugging messages via BCM KONA UART"
 		depends on ARCH_BCM_MOBILE
@@ -126,10 +270,9 @@ choice
 		  mobile SoCs in the Kona family of chips (e.g. bcm28155,
 		  bcm11351, etc...)
 
-	config DEBUG_BCM63XX
+	config DEBUG_BCM63XX_UART
 		bool "Kernel low-level debugging on BCM63XX UART"
-		depends on ARCH_BCM_63XX
-		select DEBUG_UART_BCM63XX
+		depends on ARCH_BCMBCA
 
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
@@ -139,6 +282,18 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Marvell Berlin SoC based platforms.
 
+	config DEBUG_BRCMSTB_UART
+		bool "Use BRCMSTB UART for low-level debug"
+		depends on ARCH_BRCMSTB
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the first serial port on these devices. The
+		  UART physical and virtual address is automatically provided
+		  based on the chip identification register value.
+
+		  If you have a Broadcom STB chip and would like early print
+		  messages to appear over the UART, select this option.
+
 	config DEBUG_CLPS711X_UART1
 		bool "Kernel low-level debugging messages via UART1"
 		depends on ARCH_CLPS711X
@@ -153,14 +308,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
-	config DEBUG_CNS3XXX
-		bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
-		depends on ARCH_CNS3XXX
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-                  their output to the CNS3xxx UART0.
-
 	config DEBUG_DAVINCI_DA8XX_UART1
 		bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
 		depends on ARCH_DAVINCI_DA8XX
@@ -177,60 +324,51 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART2 serial port on DaVinci DA8XX devices.
 
-	config DEBUG_DAVINCI_DMx_UART0
-		bool "Kernel low-level debugging on DaVinci DMx using UART0"
-		depends on ARCH_DAVINCI_DMx
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART0 serial port on DaVinci DMx devices.
-
-	config DEBUG_ZYNQ_UART0
-		bool "Kernel low-level debugging on Xilinx Zynq using UART0"
-		depends on ARCH_ZYNQ
+	config DEBUG_DC21285_PORT
+		bool "Kernel low-level debugging messages via footbridge serial port"
+		depends on FOOTBRIDGE
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to UART0 on the Zynq platform.
+		  their output to the serial port in the DC21285 (Footbridge).
 
-	config DEBUG_ZYNQ_UART1
-		bool "Kernel low-level debugging on Xilinx Zynq using UART1"
-		depends on ARCH_ZYNQ
+	config DEBUG_DIGICOLOR_UA0
+		bool "Kernel low-level debugging messages via Digicolor UA0"
+		depends on ARCH_DIGICOLOR
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to UART1 on the Zynq platform.
+		  their output to the UA0 serial port in the CX92755.
 
-		  If you have a ZC702 board and want early boot messages to
-		  appear on the USB serial adaptor, select this option.
-
-	config DEBUG_DC21285_PORT
-		bool "Kernel low-level debugging messages via footbridge serial port"
-		depends on FOOTBRIDGE
+	config DEBUG_EP93XX
+		bool "Kernel low-level debugging messages via ep93xx UART"
+		depends on ARCH_EP93XX
+		select DEBUG_UART_PL01X
 		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port in the DC21285 (Footbridge).
+		  Say Y here if you want kernel low-level debugging support
+		  on Cirrus Logic EP93xx based platforms.
 
 	config DEBUG_FOOTBRIDGE_COM1
 		bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
 		depends on FOOTBRIDGE
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the 8250 at PCI COM1.
 
-	config DEBUG_HI3620_UART
-		bool "Hisilicon HI3620 Debug UART"
-		depends on ARCH_HI3xxx
-		select DEBUG_UART_PL01X
+	config DEBUG_GEMINI
+		bool "Kernel low-level debugging messages via Cortina Systems Gemini UART"
+		depends on ARCH_GEMINI
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on HI3620 UART.
+		  on Cortina Gemini based platforms.
 
-	config DEBUG_HI3716_UART
-		bool "Hisilicon Hi3716 Debug UART"
+	config DEBUG_HI3620_UART
+		bool "Hisilicon HI3620 Debug UART"
 		depends on ARCH_HI3xxx
 		select DEBUG_UART_PL01X
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on HI3716 UART.
+		  on HI3620 UART.
 
 	config DEBUG_HIGHBANK_UART
 		bool "Kernel low-level debugging messages via Highbank UART"
@@ -240,6 +378,14 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the UART on Highbank based devices.
 
+	config DEBUG_HIP01_UART
+		bool "Hisilicon Hip01 Debug UART"
+		depends on ARCH_HIP01
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on HIP01 UART.
+
 	config DEBUG_HIP04_UART
 		bool "Hisilicon HiP04 Debug UART"
 		depends on ARCH_HIP04
@@ -278,12 +424,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX25.
 
-	config DEBUG_IMX21_IMX27_UART
-		bool "i.MX21 and i.MX27 Debug UART"
-		depends on SOC_IMX21 || SOC_IMX27
+	config DEBUG_IMX27_UART
+		bool "i.MX27 Debug UART"
+		depends on SOC_IMX27
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX21 or i.MX27.
+		  on i.MX27.
 
 	config DEBUG_IMX28_UART
 		bool "i.MX28 Debug UART"
@@ -349,6 +495,28 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX6SX.
 
+	config DEBUG_IMX6UL_UART
+		bool "i.MX6UL Debug UART"
+		depends on SOC_IMX6UL
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX6UL.
+
+	config DEBUG_IMX7D_UART
+		bool "i.MX7D Debug UART"
+		depends on SOC_IMX7D
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX7D.
+
+	config DEBUG_INTEGRATOR
+		bool "Kernel low-level debugging messages via ARM Integrator UART"
+		depends on ARCH_INTEGRATOR
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on ARM Integrator platforms.
+
 	config DEBUG_KEYSTONE_UART0
 		bool "Kernel low-level debugging on KEYSTONE2 using UART0"
 		depends on ARCH_KEYSTONE
@@ -365,6 +533,22 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART1 serial port on KEYSTONE2 devices.
 
+	config DEBUG_LPC18XX_UART0
+		bool "Kernel low-level debugging via LPC18xx/43xx UART0"
+		depends on ARCH_LPC18XX
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on NXP LPC18xx/43xx UART0.
+
+	config DEBUG_LPC32XX
+		bool "Kernel low-level debugging messages via NXP LPC32xx UART"
+		depends on ARCH_LPC32XX
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on NXP LPC32xx based platforms.
+
 	config DEBUG_MESON_UARTAO
 		bool "Kernel low-level debugging via Meson6 UARTAO"
 		depends on ARCH_MESON
@@ -388,48 +572,14 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on MMP UART3.
 
-	config DEBUG_MSM_UART
-		bool "Kernel low-level debugging messages via MSM UART"
-		depends on ARCH_MSM
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM devices.
-
-		  ARCH                DEBUG_UART_PHYS   DEBUG_UART_BASE   #
-		  MSM7X00A, QSD8X50   0xa9a00000        0xe1000000        UART1
-		  MSM7X00A, QSD8X50   0xa9b00000        0xe1000000        UART2
-		  MSM7X00A, QSD8X50   0xa9c00000        0xe1000000        UART3
-
-		  MSM7X30             0xaca00000        0xe1000000        UART1
-		  MSM7X30             0xacb00000        0xe1000000        UART2
-		  MSM7X30             0xacc00000        0xe1000000        UART3
-
-		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
-		  options based on your needs.
-
-	config DEBUG_QCOM_UARTDM
-		bool "Kernel low-level debugging messages via QCOM UARTDM"
-		depends on ARCH_QCOM
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on Qualcomm devices.
-
-		  ARCH      DEBUG_UART_PHYS   DEBUG_UART_BASE
-		  APQ8084   0xf995e000        0xfa75e000
-		  MSM8X60   0x19c40000        0xf0040000
-		  MSM8960   0x16440000        0xf0040000
-		  MSM8974   0xf991e000        0xfa71e000
-
-		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
-		  options based on your needs.
-
-	config DEBUG_MVEBU_UART
-		bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
+	config DEBUG_MVEBU_UART0
+		bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)"
 		depends on ARCH_MVEBU
+		depends on ARCH_MVEBU && CPU_V7
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on MVEBU based platforms.
+		  on MVEBU based platforms on UART0.
 
 		  This option should be used with the old bootloaders
 		  that left the internal registers mapped at
@@ -438,31 +588,80 @@ choice
 		  Plathome OpenBlocks AX3, when using the original
 		  bootloader.
 
+		  This option will not work on older Marvell platforms
+		  (Kirkwood, Dove, MV78xx0, Orion5x), which should pick
+		  the "new bootloader" variant.
+
 		  If the wrong DEBUG_MVEBU_UART* option is selected,
 		  when u-boot hands over to the kernel, the system
 		  silently crashes, with no serial output at all.
 
-	config DEBUG_MVEBU_UART_ALTERNATE
-		bool "Kernel low-level debugging messages via MVEBU UART (new bootloaders)"
+	config DEBUG_MVEBU_UART0_ALTERNATE
+		bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)"
+		depends on ARCH_MVEBU || ARCH_DOVE || ARCH_MV78XX0 || ARCH_ORION5X
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on MVEBU based platforms on UART0. (Armada XP, Armada 3xx,
+		  Kirkwood, Dove, MV78xx0, Orion5x).
+
+
+		  This option should be used with the new bootloaders
+		  that remap the internal registers at 0xf1000000.
+
+		  If the wrong DEBUG_MVEBU_UART* option is selected,
+		  when u-boot hands over to the kernel, the system
+		  silently crashes, with no serial output at all.
+
+	config DEBUG_MVEBU_UART1_ALTERNATE
+		bool "Kernel low-level debugging messages via MVEBU UART1 (new bootloaders)"
 		depends on ARCH_MVEBU
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on MVEBU based platforms.
+		  on MVEBU based platforms on UART1. (Armada XP, Armada 3xx,
+		  Kirkwood, Dove, MV78xx0, Orion5x).
 
 		  This option should be used with the new bootloaders
 		  that remap the internal registers at 0xf1000000.
+		  All of the older (pre Armada XP/370) platforms also use
+		  this address, regardless of the boot loader version.
 
 		  If the wrong DEBUG_MVEBU_UART* option is selected,
 		  when u-boot hands over to the kernel, the system
 		  silently crashes, with no serial output at all.
 
-	config DEBUG_VF_UART
-		bool "Vybrid UART"
-		depends on SOC_VF610
+	config DEBUG_MSTARV7_PMUART
+		bool "Kernel low-level debugging messages via MSTARV7 PM UART"
+		depends on ARCH_MSTARV7
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on Vybrid based platforms.
+		  for MSTAR ARMv7-based platforms on PM UART.
+
+	config DEBUG_MT6589_UART0
+		bool "Mediatek mt6589 UART0"
+		depends on ARCH_MEDIATEK
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  for Mediatek mt6589 based platforms on UART0.
+
+	config DEBUG_MT8127_UART0
+		bool "Mediatek mt8127/mt6592 UART0"
+		depends on ARCH_MEDIATEK
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  for Mediatek mt8127 based platforms on UART0.
+
+	config DEBUG_MT8135_UART3
+		bool "Mediatek mt8135 UART3"
+		depends on ARCH_MEDIATEK
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  for Mediatek mt8135 based platforms on UART3.
 
 	config DEBUG_NOMADIK_UART
 		bool "Kernel low-level debugging messages via NOMADIK UART"
@@ -488,10 +687,34 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on TI-NSPIRE CX models.
 
+	config DEBUG_OMAP1UART1
+		bool "Kernel low-level debugging via OMAP1 UART1"
+		depends on ARCH_OMAP1
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on OMAP1 based platforms (except OMAP730) on the UART1.
+
+	config DEBUG_OMAP1UART2
+		bool "Kernel low-level debugging via OMAP1 UART2"
+		depends on ARCH_OMAP1
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on OMAP1 based platforms (except OMAP730) on the UART2.
+
+	config DEBUG_OMAP1UART3
+		bool "Kernel low-level debugging via OMAP1 UART3"
+		depends on ARCH_OMAP1
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on OMAP1 based platforms (except OMAP730) on the UART3.
+
 	config DEBUG_OMAP2UART1
 		bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 		help
 		  This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
 		  omap3 torpedo and 3530 lv som.
@@ -499,17 +722,17 @@ choice
 	config DEBUG_OMAP2UART2
 		bool "Kernel low-level debugging messages via OMAP2/3/4 UART2"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_OMAP2UART3
 		bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_OMAP3UART3
 		bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 		help
 		  This covers at least cm_t3x, beagle, crane, devkit8000,
 		  igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
@@ -518,51 +741,43 @@ choice
 	config DEBUG_OMAP4UART3
 		bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_OMAP3UART4
 		bool "Kernel low-level debugging messages via OMAP36XX UART4"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_OMAP4UART4
 		bool "Kernel low-level debugging messages via OMAP4/5 UART4"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_TI81XXUART1
 		bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_TI81XXUART2
 		bool "Kernel low-level debugging messages via TI81XX UART2"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_TI81XXUART3
 		bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_AM33XXUART1
 		bool "Kernel low-level debugging messages via AM33XX UART1"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_ZOOM_UART
 		bool "Kernel low-level debugging messages via Zoom2/3 UART"
 		depends on ARCH_OMAP2PLUS
 		select DEBUG_OMAP2PLUS_UART
 
-	config DEBUG_PICOXCELL_UART
-		depends on ARCH_PICOXCELL
-		bool "Use PicoXcell UART for low-level debug"
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on PicoXcell based platforms.
-
 	config DEBUG_PXA_UART1
 		depends on ARCH_PXA
 		bool "Use PXA UART1 for low-level debug"
@@ -571,6 +786,24 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on PXA UART1.
 
+	config DEBUG_QCOM_UARTDM
+		bool "Kernel low-level debugging messages via QCOM UARTDM"
+		depends on ARCH_QCOM
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on Qualcomm devices.
+
+		  ARCH      DEBUG_UART_PHYS   DEBUG_UART_VIRT
+		  APQ8064   0x16640000        0xf0040000
+		  APQ8084   0xf995e000        0xfa75e000
+		  IPQ4019   0x078af000        0xf78af000
+		  MSM8X60   0x19c40000        0xf0040000
+		  MSM8960   0x16440000        0xf0040000
+		  MSM8974   0xf991e000        0xfa71e000
+
+		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
+		  options based on your needs.
+
 	config DEBUG_REALVIEW_STD_PORT
 		bool "RealView Default UART"
 		depends on ARCH_REALVIEW
@@ -589,6 +822,30 @@ choice
 		  their output to the standard serial port on the RealView
 		  PB1176 platform.
 
+	config DEBUG_RV1108_UART0
+		bool "Kernel low-level debugging messages via Rockchip RV1108 UART0"
+		depends on ARCH_ROCKCHIP
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+                  on Rockchip RV1108 based platforms.
+
+	config DEBUG_RV1108_UART1
+		bool "Kernel low-level debugging messages via Rockchip RV1108 UART1"
+		depends on ARCH_ROCKCHIP
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Rockchip RV1108 based platforms.
+
+	config DEBUG_RV1108_UART2
+		bool "Kernel low-level debugging messages via Rockchip RV1108 UART2"
+		depends on ARCH_ROCKCHIP
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Rockchip RV1108 based platforms.
+
 	config DEBUG_RK29_UART0
 		bool "Kernel low-level debugging messages via Rockchip RK29 UART0"
 		depends on ARCH_ROCKCHIP
@@ -653,10 +910,104 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Rockchip RK32xx based platforms.
 
+	config DEBUG_R7S72100_SCIF2
+		bool "Kernel low-level debugging messages via SCIF2 on R7S72100"
+		depends on ARCH_R7S72100
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF2 on Renesas RZ/A1H (R7S72100).
+
+	config DEBUG_R7S9210_SCIF2
+		bool "Kernel low-level debugging messages via SCIF2 on R7S9210"
+		depends on ARCH_R7S9210
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF2 on Renesas RZ/A2M (R7S9210).
+
+	config DEBUG_R7S9210_SCIF4
+		bool "Kernel low-level debugging messages via SCIF4 on R7S9210"
+		depends on ARCH_R7S9210
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF4 on Renesas RZ/A2M (R7S9210).
+
+	config DEBUG_RCAR_GEN1_SCIF0
+		bool "Kernel low-level debugging messages via SCIF0 on R8A7778"
+		depends on ARCH_R8A7778
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF0 on Renesas R-Car M1A (R8A7778).
+
+	config DEBUG_RCAR_GEN1_SCIF2
+		bool "Kernel low-level debugging messages via SCIF2 on R8A7779"
+		depends on ARCH_R8A7779
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF2 on Renesas R-Car H1 (R8A7779).
+
+	config DEBUG_RCAR_GEN2_SCIF0
+		bool "Kernel low-level debugging messages via SCIF0 on R-Car Gen2 and RZ/G1"
+		depends on ARCH_R8A7743 || ARCH_R8A7744 || ARCH_R8A7790 || \
+			ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF0 on Renesas RZ/G1M (R8A7743), RZ/G1N (R8A7744),
+		  R-Car H2 (R8A7790), M2-W (R8A7791), V2H (R8A7792), or
+		  M2-N (R8A7793).
+
+	config DEBUG_RCAR_GEN2_SCIF1
+		bool "Kernel low-level debugging messages via SCIF1 on R8A77470"
+		depends on ARCH_R8A77470
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF1 on Renesas RZ/G1C (R8A77470).
+
+	config DEBUG_RCAR_GEN2_SCIF2
+		bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
+		depends on ARCH_R8A7794
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF2 on Renesas R-Car E2 (R8A7794).
+
+	config DEBUG_RCAR_GEN2_SCIF4
+		bool "Kernel low-level debugging messages via SCIF4 on R8A7745"
+		depends on ARCH_R8A7745
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF4 on Renesas RZ/G1E (R8A7745).
+
+	config DEBUG_RCAR_GEN2_SCIFA2
+		bool "Kernel low-level debugging messages via SCIFA2 on R8A7742"
+		depends on ARCH_R8A7742
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIFA2 on Renesas RZ/G1H (R8A7742).
+
+	config DEBUG_RMOBILE_SCIFA0
+		bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4"
+		depends on ARCH_R8A73A4
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4).
+
+	config DEBUG_RMOBILE_SCIFA1
+		bool "Kernel low-level debugging messages via SCIFA1 on R8A7740"
+		depends on ARCH_R8A7740
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIFA1 on Renesas R-Mobile A1 (R8A7740).
+
+	config DEBUG_RMOBILE_SCIFA4
+		bool "Kernel low-level debugging messages via SCIFA4 on SH73A0"
+		depends on ARCH_SH73A0
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
+
 	config DEBUG_S3C_UART0
-		depends on PLAT_SAMSUNG
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 0 for low-level debug"
 		help
@@ -665,9 +1016,9 @@ choice
 		  by the boot-loader before use.
 
 	config DEBUG_S3C_UART1
-		depends on PLAT_SAMSUNG
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 1 for low-level debug"
 		help
@@ -676,9 +1027,9 @@ choice
 		  by the boot-loader before use.
 
 	config DEBUG_S3C_UART2
-		depends on PLAT_SAMSUNG
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 2 for low-level debug"
 		help
@@ -687,8 +1038,9 @@ choice
 		  by the boot-loader before use.
 
 	config DEBUG_S3C_UART3
-		depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
+		depends on ARCH_EXYNOS || ARCH_S5PV210
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 3 for low-level debug"
 		help
@@ -696,40 +1048,53 @@ choice
 		  their output to UART 3. The port must have been initialised
 		  by the boot-loader before use.
 
-	config DEBUG_S3C2410_UART0
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
+	config DEBUG_SA1100
+		depends on ARCH_SA1100
+		bool "Use SA1100 UARTs for low-level debug"
 		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 0. The port must have been initialised
-		  by the boot-loader before use.
+		  Say Y here if you want kernel low-level debugging support
+		  on SA-11x0 UART ports. The kernel will check for the first
+		  enabled UART in a sequence 3-1-2.
 
-	config DEBUG_S3C2410_UART1
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
+	config DEBUG_SD5203_UART
+		bool "Hisilicon SD5203 Debug UART"
+		depends on ARCH_SD5203
+		select DEBUG_UART_8250
 		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 1. The port must have been initialised
-		  by the boot-loader before use.
+		  Say Y here if you want kernel low-level debugging support
+		  on SD5203 UART.
 
-	config DEBUG_S3C2410_UART2
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
+	config DEBUG_SOCFPGA_UART0
+		depends on ARCH_INTEL_SOCFPGA
+		bool "Use SOCFPGA UART0 for low-level debug"
+		select DEBUG_UART_8250
 		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 2. The port must have been initialised
-		  by the boot-loader before use.
+		  Say Y here if you want kernel low-level debugging support
+		  on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
+
+	config DEBUG_SOCFPGA_ARRIA10_UART1
+		depends on ARCH_INTEL_SOCFPGA
+		bool "Use SOCFPGA Arria10 UART1 for low-level debug"
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on SOCFPGA(Arria 10) based platforms.
+
+	config DEBUG_SOCFPGA_CYCLONE5_UART1
+		depends on ARCH_INTEL_SOCFPGA
+		bool "Use SOCFPGA Cyclone 5 UART1 for low-level debug"
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
 
-	config DEBUG_SOCFPGA_UART
-		depends on ARCH_SOCFPGA
-		bool "Use SOCFPGA UART for low-level debug"
+	config DEBUG_SUN9I_UART0
+		bool "Kernel low-level debugging messages via sun9i UART0"
+		depends on MACH_SUN9I
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on SOCFPGA based platforms.
+		  on Allwinner A80 based platforms on the UART0.
 
 	config DEBUG_SUNXI_UART0
 		bool "Kernel low-level debugging messages via sunXi UART0"
@@ -755,6 +1120,100 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Allwinner A31/A23 based platforms on the R_UART.
 
+	config DEBUG_SPEAR3XX
+		bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART"
+		depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on ST SPEAr based platforms.
+
+	config DEBUG_SPEAR13XX
+		bool "Kernel low-level debugging messages via ST SPEAr 13xx UART"
+		depends on ARCH_SPEAR13XX
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on ST SPEAr13xx based platforms.
+
+	config DEBUG_STIH41X_ASC2
+		bool "Use StiH415/416 ASC2 UART for low-level debug"
+		depends on ARCH_STI
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STiH415/416 based platforms like b2000, which has
+		  default UART wired up to ASC2.
+
+		  If unsure, say N.
+
+	config DEBUG_STIH41X_SBC_ASC1
+		bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
+		depends on ARCH_STI
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STiH415/416 based platforms like b2020. which has
+		  default UART wired up to SBC ASC1.
+
+		  If unsure, say N.
+
+	config DEBUG_STIH418_SBC_ASC0
+		bool "Use StiH418 SBC ASC0 UART for low-level debug"
+		depends on ARCH_STI
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STiH418 based platforms which has default UART wired
+		  up to SBC ASC0.
+
+		  If unsure, say N.
+
+	config STM32F4_DEBUG_UART
+		bool "Use STM32F4 UART for low-level debug"
+		depends on MACH_STM32F429 || MACH_STM32F469
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32F4 based platforms, which default UART is wired on
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
+
+		  If unsure, say N.
+
+	config STM32F7_DEBUG_UART
+		bool "Use STM32F7 UART for low-level debug"
+		depends on MACH_STM32F746 || MACH_STM32F769
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32F7 based platforms, which default UART is wired on
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
+
+		  If unsure, say N.
+
+	config STM32H7_DEBUG_UART
+		bool "Use STM32H7 UART for low-level debug"
+		depends on MACH_STM32H743
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32H7 based platforms, which default UART is wired on
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
+
+		  If unsure, say N.
+
+	config STM32MP1_DEBUG_UART
+		bool "Use STM32MP1 UART for low-level debug"
+		depends on MACH_STM32MP157
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support on
+		  STM32MP1-based platforms, where the default UART is wired to
+		  UART4, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT.
+
+		  If unsure, say N.
+
 	config TEGRA_DEBUG_UART_AUTO_ODMDATA
 		bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
 		depends on ARCH_TEGRA
@@ -807,50 +1266,6 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Tegra based platforms.
 
-	config DEBUG_SIRFPRIMA2_UART1
-		bool "Kernel low-level debugging messages via SiRFprimaII UART1"
-		depends on ARCH_PRIMA2
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart1 port on SiRFprimaII devices.
-
-	config DEBUG_SIRFMARCO_UART1
-		bool "Kernel low-level debugging messages via SiRFmarco UART1"
-		depends on ARCH_MARCO
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart1 port on SiRFmarco devices.
-
-	config STIH41X_DEBUG_ASC2
-		bool "Use StiH415/416 ASC2 UART for low-level debug"
-		depends on ARCH_STI
-		select DEBUG_STI_UART
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on STiH415/416 based platforms like b2000, which has
-		  default UART wired up to ASC2.
-
-		  If unsure, say N.
-
-	config STIH41X_DEBUG_SBC_ASC1
-		bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
-		depends on ARCH_STI
-		select DEBUG_STI_UART
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on STiH415/416 based platforms like b2020. which has
-		  default UART wired up to SBC ASC1.
-
-		  If unsure, say N.
-
-	config DEBUG_U300_UART
-		bool "Kernel low-level debugging messages via U300 UART0"
-		depends on ARCH_U300
-		select DEBUG_UART_PL01X
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart port on U300 devices.
-
 	config DEBUG_UX500_UART
 		depends on ARCH_U8500
 		bool "Use Ux500 UART for low-level debug"
@@ -858,13 +1273,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Ux500 based platforms.
 
-	config DEBUG_MT6589_UART0
-		bool "Mediatek mt6589 UART0"
-		depends on ARCH_MEDIATEK
-		select DEBUG_UART_8250
+	config DEBUG_VERSATILE
+		bool "Kernel low-level debugging messages via ARM Versatile UART"
+		depends on ARCH_VERSATILE
+		select DEBUG_UART_PL01X
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  for Mediatek mt6589 based platforms on UART0.
+		  on ARM Versatile platforms.
 
 	config DEBUG_VEXPRESS_UART0_DETECT
 		bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
@@ -902,6 +1317,13 @@ choice
 		  This option selects UART0 at 0xb0090000. This is appropriate for
 		  Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7
 
+	config DEBUG_VF_UART
+		bool "Vybrid UART"
+		depends on SOC_VF610
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Vybrid based platforms.
+
 	config DEBUG_VT8500_UART0
 		bool "Use UART0 on VIA/Wondermedia SoCs"
 		depends on ARCH_VT8500
@@ -909,14 +1331,22 @@ choice
 		  This option selects UART0 on VIA/Wondermedia System-on-a-chip
 		  devices, including VT8500, WM8505, WM8650 and WM8850.
 
-	config DEBUG_LL_UART_NONE
-		bool "No low-level debugging UART"
-		depends on !ARCH_MULTIPLATFORM
+	config DEBUG_ZYNQ_UART0
+		bool "Kernel low-level debugging on Xilinx Zynq using UART0"
+		depends on ARCH_ZYNQ
 		help
-		  Say Y here if your platform doesn't provide a UART option
-		  above. This relies on your platform choosing the right UART
-		  definition internally in order for low-level debugging to
-		  work.
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART0 on the Zynq platform.
+
+	config DEBUG_ZYNQ_UART1
+		bool "Kernel low-level debugging on Xilinx Zynq using UART1"
+		depends on ARCH_ZYNQ
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART1 on the Zynq platform.
+
+		  If you have a ZC702 board and want early boot messages to
+		  appear on the USB serial adaptor, select this option.
 
 	config DEBUG_ICEDCC
 		bool "Kernel low-level debugging via EmbeddedICE DCC channel"
@@ -958,20 +1388,6 @@ choice
 		  options; the platform specific options are deprecated
 		  and will be soon removed.
 
-	config DEBUG_LL_UART_EFM32
-		bool "Kernel low-level debugging via efm32 UART"
-		depends on ARCH_EFM32
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to an UART or USART port on efm32 based
-		  machines. Use the following addresses for DEBUG_UART_PHYS:
-
-		    0x4000c000 | USART0
-		    0x4000c400 | USART1
-		    0x4000c800 | USART2
-		    0x4000e000 | UART0
-		    0x4000e400 | UART1
-
 	config DEBUG_LL_UART_PL01X
 		bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
 		help
@@ -987,37 +1403,48 @@ choice
 
 endchoice
 
-config DEBUG_EXYNOS_UART
+config DEBUG_AT91_UART
 	bool
+	depends on ARCH_AT91
 
-config DEBUG_S3C2410_UART
+config DEBUG_EXYNOS_UART
 	bool
-	select DEBUG_S3C24XX_UART
 
-config DEBUG_S3C24XX_UART
+config DEBUG_S3C64XX_UART
 	bool
 
 config DEBUG_S5PV210_UART
 	bool
 
+config DEBUG_S3C_UART
+	depends on DEBUG_S3C64XX_UART ||  DEBUG_S5PV210_UART || \
+		   DEBUG_EXYNOS_UART
+	int
+	default "0" if DEBUG_S3C_UART0
+	default "1" if DEBUG_S3C_UART1
+	default "2" if DEBUG_S3C_UART2
+	default "3" if DEBUG_S3C_UART3
+
 config DEBUG_OMAP2PLUS_UART
 	bool
 	depends on ARCH_OMAP2PLUS
 
 config DEBUG_IMX_UART_PORT
-	int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
-						DEBUG_IMX25_UART || \
-						DEBUG_IMX21_IMX27_UART || \
-						DEBUG_IMX31_UART || \
-						DEBUG_IMX35_UART || \
-						DEBUG_IMX50_UART || \
-						DEBUG_IMX51_UART || \
-						DEBUG_IMX53_UART || \
-						DEBUG_IMX6Q_UART || \
-						DEBUG_IMX6SL_UART || \
-						DEBUG_IMX6SX_UART
+	int "i.MX Debug UART Port Selection"
+	depends on DEBUG_IMX1_UART || \
+		   DEBUG_IMX25_UART || \
+		   DEBUG_IMX27_UART || \
+		   DEBUG_IMX31_UART || \
+		   DEBUG_IMX35_UART || \
+		   DEBUG_IMX50_UART || \
+		   DEBUG_IMX51_UART || \
+		   DEBUG_IMX53_UART || \
+		   DEBUG_IMX6Q_UART || \
+		   DEBUG_IMX6SL_UART || \
+		   DEBUG_IMX6SX_UART || \
+		   DEBUG_IMX6UL_UART || \
+		   DEBUG_IMX7D_UART
 	default 1
-	depends on ARCH_MXC
 	help
 	  Choose UART port on which kernel low-level debug messages
 	  should be output.
@@ -1035,69 +1462,89 @@ config DEBUG_TEGRA_UART
 	bool
 	depends on ARCH_TEGRA
 
-config DEBUG_STI_UART
+config DEBUG_STM32_UART
 	bool
-	depends on ARCH_STI
+	depends on ARCH_STM32
+
+config DEBUG_UART_FLOW_CONTROL
+	bool "Enable flow control (CTS) for the debug UART"
+	depends on DEBUG_LL
+	default y if DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
+	help
+	  Some UART ports are connected to terminals that will use modem
+	  control signals to indicate whether they are ready to receive text.
+	  In practice this means that the terminal is asserting the special
+	  control signal CTS (Clear To Send). If your debug UART supports
+	  this and your debug terminal will require it, enable this option.
 
 config DEBUG_LL_INCLUDE
 	string
+	default "debug/sa1100.S" if DEBUG_SA1100
+	default "debug/palmchip.S" if DEBUG_UART_8250_PALMCHIP
 	default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
+	default "debug/at91.S" if DEBUG_AT91_UART
+	default "debug/asm9260.S" if DEBUG_ASM9260_UART
 	default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
+	default "debug/dc21285.S" if DEBUG_DC21285_PORT
 	default "debug/meson.S" if DEBUG_MESON_UARTAO
 	default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
 	default "debug/exynos.S" if DEBUG_EXYNOS_UART
-	default "debug/efm32.S" if DEBUG_LL_UART_EFM32
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
-				 DEBUG_IMX21_IMX27_UART || \
+				 DEBUG_IMX27_UART || \
 				 DEBUG_IMX31_UART || \
 				 DEBUG_IMX35_UART || \
 				 DEBUG_IMX50_UART || \
 				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX53_UART ||\
+				 DEBUG_IMX53_UART || \
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
-				 DEBUG_IMX6SX_UART
-	default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
+				 DEBUG_IMX6SX_UART || \
+				 DEBUG_IMX6UL_UART || \
+				 DEBUG_IMX7D_UART
+	default "debug/msm.S" if DEBUG_QCOM_UARTDM
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
-	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
+	default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
+	default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF2
+	default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF4
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF1
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIFA2
+	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
+	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
+	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
+	default "debug/s3c24xx.S" if DEBUG_S3C64XX_UART
 	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
-	default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
-	default "debug/sti.S" if DEBUG_STI_UART
+	default "debug/sti.S" if DEBUG_STIH41X_ASC2
+	default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
+	default "debug/sti.S" if DEBUG_STIH418_SBC_ASC0
+	default "debug/stm32.S" if DEBUG_STM32_UART
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
 	default "debug/ux500.S" if DEBUG_UX500_UART
 	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT
 	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
-	default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX
+	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART || DEBUG_BCMBCA
+	default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
+	default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART
 	default "mach/debug-macro.S"
 
 # Compatibility options for PL01x
 config DEBUG_UART_PL01X
-	def_bool ARCH_EP93XX || \
-		ARCH_INTEGRATOR || \
-		ARCH_SPEAR3XX || \
-		ARCH_SPEAR6XX || \
-		ARCH_SPEAR13XX || \
-		ARCH_VERSATILE
+	bool
 
 # Compatibility options for 8250
 config DEBUG_UART_8250
-	def_bool ARCH_DOVE || ARCH_EBSA110 || \
-		(FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
-		ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
-		ARCH_IOP33X || ARCH_IXP4XX || \
-		ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
-
-# Compatibility options for BCM63xx
-config DEBUG_UART_BCM63XX
-	def_bool ARCH_BCM_63XX
+	def_bool ARCH_IXP4XX || ARCH_RPC
 
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
-	default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
 	default 0x01c28000 if DEBUG_SUNXI_UART0
 	default 0x01c28400 if DEBUG_SUNXI_UART1
 	default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
@@ -1106,188 +1553,272 @@ config DEBUG_UART_PHYS
 	default 0x02530c00 if DEBUG_KEYSTONE_UART0
 	default 0x02531000 if DEBUG_KEYSTONE_UART1
 	default 0x03010fe0 if ARCH_RPC
+	default 0x07000000 if DEBUG_SUN9I_UART0
+	default 0x09530000 if DEBUG_STIH418_SBC_ASC0
 	default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
 				DEBUG_VEXPRESS_UART0_CA9
 	default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0x10124000 if DEBUG_RK3X_UART0
 	default 0x10126000 if DEBUG_RK3X_UART1
-	default 0x101f1000 if ARCH_VERSATILE
+	default 0x101f1000 if DEBUG_VERSATILE
 	default 0x101fb000 if DEBUG_NOMADIK_UART
+	default 0x10210000 if DEBUG_RV1108_UART2
+	default 0x10220000 if DEBUG_RV1108_UART1
+	default 0x10230000 if DEBUG_RV1108_UART0
+	default 0x11002000 if DEBUG_MT8127_UART0
 	default 0x11006000 if DEBUG_MT6589_UART0
-	default 0x16000000 if ARCH_INTEGRATOR
+	default 0x11009000 if DEBUG_MT8135_UART3
+	default 0x16000000 if DEBUG_INTEGRATOR
+	default 0x1600d000 if DEBUG_SD5203_UART
 	default 0x18000300 if DEBUG_BCM_5301X
+	default 0x18000400 if DEBUG_BCM_HR2
+	default 0x18023000 if DEBUG_BCM_IPROC_UART3
 	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
+	default 0x1f221000 if DEBUG_MSTARV7_PMUART
+	default 0x20001000 if DEBUG_HIP01_UART
 	default 0x20060000 if DEBUG_RK29_UART0
 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
 	default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
 	default 0x20201000 if DEBUG_BCM2835
 	default 0x3e000000 if DEBUG_BCM_KONA_UART
-	default 0x4000e400 if DEBUG_LL_UART_EFM32
-	default 0x40090000 if ARCH_LPC32XX
+	default 0x3f201000 if DEBUG_BCM2836
+	default 0x40010000 if STM32MP1_DEBUG_UART
+	default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \
+				STM32H7_DEBUG_UART
+	default 0x40028000 if DEBUG_AT91_SAMV7_USART1
+	default 0x40081000 if DEBUG_LPC18XX_UART0
+	default 0x40090000 if DEBUG_LPC32XX
 	default 0x40100000 if DEBUG_PXA_UART1
-	default 0x42000000 if ARCH_GEMINI
-	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
-				DEBUG_S3C2410_UART0)
-	default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
-				DEBUG_S3C2410_UART1)
-	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
-				DEBUG_S3C2410_UART2)
-	default 0x78000000 if DEBUG_CNS3XXX
-	default 0x7c0003f8 if FOOTBRIDGE
-	default 0x78000000 if DEBUG_CNS3XXX
+	default 0x42000000 if DEBUG_GEMINI
+	default 0x44e09000 if DEBUG_AM33XXUART1
+	default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
+	default 0x48022000 if DEBUG_TI81XXUART2
+	default 0x48024000 if DEBUG_TI81XXUART3
+	default 0x4806a000 if DEBUG_OMAP2UART1
+	default 0x4806c000 if DEBUG_OMAP2UART2
+	default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
+	default 0x49020000 if DEBUG_OMAP3UART3
+	default 0x49042000 if DEBUG_OMAP3UART4
+	default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
+	default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
+	default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
+	default 0x7f005800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
+	default 0x7f005c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
+	default 0x80010000 if DEBUG_ASM9260_UART
 	default 0x80070000 if DEBUG_IMX23_UART
 	default 0x80074000 if DEBUG_IMX28_UART
-	default 0x80230000 if DEBUG_PICOXCELL_UART
-	default 0x808c0000 if ARCH_EP93XX
+	default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX
 	default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
-	default 0xa9a00000 if DEBUG_MSM_UART
 	default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
-	default 0xc0013000 if DEBUG_U300_UART
 	default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
 	default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
-	default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
-	default 0xd0012000 if DEBUG_MVEBU_UART
+	default 0xd0000000 if DEBUG_SPEAR3XX
+	default 0xd0012000 if DEBUG_MVEBU_UART0
 	default 0xc81004c0 if DEBUG_MESON_UARTAO
 	default 0xd4017000 if DEBUG_MMP_UART2
 	default 0xd4018000 if DEBUG_MMP_UART3
-	default 0xe0000000 if ARCH_SPEAR13XX
+	default 0xe0000000 if DEBUG_SPEAR13XX
+	default 0xe0064200 if DEBUG_AT91_LAN966_FLEXCOM
+	default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
 	default 0xe4007000 if DEBUG_HIP04_UART
-	default 0xf0000be0 if ARCH_EBSA110
-	default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE
-	default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \
-				ARCH_ORION5X
+	default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
+	default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
+	default 0xe6c60000 if DEBUG_RCAR_GEN2_SCIFA2
+	default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4
+	default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2
+	default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
+	default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1
+	default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4
+	default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2
+	default 0xe8009000 if DEBUG_R7S9210_SCIF4
+	default 0xf0000000 if DEBUG_DIGICOLOR_UA0
+	default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
+	default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
+	default 0xf8020000 if DEBUG_AT91_SAMA5D2_UART1
 	default 0xf8b00000 if DEBUG_HIX5HD2_UART
 	default 0xf991e000 if DEBUG_QCOM_UARTDM
+	default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfcb00000 if DEBUG_HI3620_UART
-	default 0xfe800000 if ARCH_IOP32X
+	default 0xfd883000 if DEBUG_ALPINE_UART0
+	default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1
+	default 0xfed32000 if DEBUG_STIH41X_ASC2
 	default 0xff690000 if DEBUG_RK32_UART2
-	default 0xffc02000 if DEBUG_SOCFPGA_UART
-	default 0xffd82340 if ARCH_IOP13XX
+	default 0xff800640 if DEBUG_BCMBCA
+	default 0xffc02000 if DEBUG_SOCFPGA_UART0
+	default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1
+	default 0xffc03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
+	default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
+	default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
 	default 0xfff36000 if DEBUG_HIGHBANK_UART
-	default 0xfffe8600 if DEBUG_UART_BCM63XX
-	default 0xfffff700 if ARCH_IOP33X
-	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
-		DEBUG_LL_UART_EFM32 || \
+	default 0xfffb0000 if DEBUG_OMAP1UART1
+	default 0xfffb0800 if DEBUG_OMAP1UART2
+	default 0xfffb9800 if DEBUG_OMAP1UART3
+	default 0xfffe8600 if DEBUG_BCM63XX_UART
+	default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
+	default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
+	depends on ARCH_EP93XX || \
+	        DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX
+		DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
+		DEBUG_R7S9210_SCIF2 || DEBUG_R7S9210_SCIF4 || \
+		DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
+		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \
+		DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \
+		DEBUG_RCAR_GEN2_SCIFA2 || \
+		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
+		DEBUG_RMOBILE_SCIFA4 || \
+		DEBUG_S3C64XX_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_BCMBCA || DEBUG_ASM9260_UART || \
+		DEBUG_DIGICOLOR_UA0 || \
+		DEBUG_AT91_UART || DEBUG_STM32_UART || \
+		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
+		DEBUG_STIH418_SBC_ASC0
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
+	default 0xc881f000 if DEBUG_RV1108_UART2
+	default 0xc8821000 if DEBUG_RV1108_UART1
+	default 0xc8912000 if DEBUG_RV1108_UART0
 	default 0xe0010fe0 if ARCH_RPC
-	default 0xe1000000 if DEBUG_MSM_UART
-	default 0xf0000be0 if ARCH_EBSA110
+	default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
+	default 0xf0010000 if DEBUG_ASM9260_UART
+	default 0xf0100000 if DEBUG_DIGICOLOR_UA0
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
-	default 0xf0201000 if DEBUG_BCM2835
+	default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
+	default 0xf0221000 if DEBUG_MSTARV7_PMUART
 	default 0xf1000300 if DEBUG_BCM_5301X
+	default 0xf1000400 if DEBUG_BCM_HR2
+	default 0xf1002000 if DEBUG_MT8127_UART0
 	default 0xf1006000 if DEBUG_MT6589_UART0
-	default 0xf11f1000 if ARCH_VERSATILE
-	default 0xf1600000 if ARCH_INTEGRATOR
+	default 0xf1009000 if DEBUG_MT8135_UART3
+	default 0xf1023000 if DEBUG_BCM_IPROC_UART3
+	default 0xf11f1000 if DEBUG_VERSATILE
+	default 0xf1600000 if DEBUG_INTEGRATOR
 	default 0xf1c28000 if DEBUG_SUNXI_UART0
 	default 0xf1c28400 if DEBUG_SUNXI_UART1
 	default 0xf1f02800 if DEBUG_SUNXI_R_UART
-	default 0xf2100000 if DEBUG_PXA_UART1
-	default 0xf4090000 if ARCH_LPC32XX
-	default 0xf4200000 if ARCH_GEMINI
-	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
-				DEBUG_S3C2410_UART0)
-	default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
-				DEBUG_S3C2410_UART1)
-	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
-				DEBUG_S3C2410_UART2)
+	default 0xf31004c0 if DEBUG_MESON_UARTAO
+	default 0xf4090000 if DEBUG_LPC32XX
+	default 0xf4200000 if DEBUG_GEMINI
+	default 0xf6200000 if DEBUG_PXA_UART1
+	default 0xf7000000 if DEBUG_SUN9I_UART0
+	default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
+	default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
+	default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
+	default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
+	default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8007000 if DEBUG_HIP04_UART
 	default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
 	default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
+	default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
+	default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
+	default 0xf9530000 if DEBUG_STIH418_SBC_ASC0
+	default 0xf9e09000 if DEBUG_AM33XXUART1
+	default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
+	default 0xfa022000 if DEBUG_TI81XXUART2
+	default 0xfa024000 if DEBUG_TI81XXUART3
+	default 0xfa06a000 if DEBUG_OMAP2UART1
+	default 0xfa06c000 if DEBUG_OMAP2UART2
+	default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0xfa71e000 if DEBUG_QCOM_UARTDM
-	default 0xfb002000 if DEBUG_CNS3XXX
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
+	default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
+	default 0xfb020000 if DEBUG_OMAP3UART3
+	default 0xfb042000 if DEBUG_OMAP3UART4
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
-	default 0xfcfe8600 if DEBUG_UART_BCM63XX
-	default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
-	default 0xfd000000 if ARCH_SPEAR13XX
-	default 0xfd012000 if ARCH_MV78XX0
-	default 0xfde12000 if ARCH_DOVE
-	default 0xfe012000 if ARCH_ORION5X
-	default 0xf31004c0 if DEBUG_MESON_UARTAO
+	default 0xfcfe8600 if DEBUG_BCM63XX_UART
+	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
+	default 0xfd064200 if DEBUG_AT91_LAN966_FLEXCOM
+	default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1
+	default 0xfd883000 if DEBUG_ALPINE_UART0
+	default 0xfdd32000 if DEBUG_STIH41X_ASC2
+	default 0xfe010000 if STM32MP1_DEBUG_UART
 	default 0xfe017000 if DEBUG_MMP_UART2
 	default 0xfe018000 if DEBUG_MMP_UART3
 	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
-	default 0xfe230000 if DEBUG_PICOXCELL_UART
 	default 0xfe300000 if DEBUG_BCM_KONA_UART
-	default 0xfe800000 if ARCH_IOP32X
+	default 0xfe300640 if DEBUG_BCMBCA
 	default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
 	default 0xfeb24000 if DEBUG_RK3X_UART0
 	default 0xfeb26000 if DEBUG_RK3X_UART1
 	default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
 	default 0xfeb31000 if DEBUG_KEYSTONE_UART1
-	default 0xfec02000 if DEBUG_SOCFPGA_UART
-	default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE
-	default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
+	default 0xfec02000 if DEBUG_SOCFPGA_UART0
+	default 0xfec02100 if DEBUG_SOCFPGA_ARRIA10_UART1
+	default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
+	default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
+	default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
 	default 0xfec90000 if DEBUG_RK32_UART2
 	default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
-	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
+	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART
 	default 0xfed60000 if DEBUG_RK29_UART0
 	default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
 	default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
-	default 0xfedc0000 if ARCH_EP93XX
-	default 0xfee003f8 if FOOTBRIDGE
+	default 0xfedc0000 if DEBUG_EP93XX
+	default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1
 	default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
-	default 0xfee82340 if ARCH_IOP13XX
-	default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
-	default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
+	default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
+	default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xfef36000 if DEBUG_HIGHBANK_UART
-	default 0xfefff700 if ARCH_IOP33X
-	default 0xff003000 if DEBUG_U300_UART
+	default 0xff0b0000 if DEBUG_OMAP1UART1
+	default 0xff0b0800 if DEBUG_OMAP1UART2
+	default 0xff0b9800 if DEBUG_OMAP1UART3
+	default 0xffd01000 if DEBUG_HIP01_UART
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX
+		DEBUG_QCOM_UARTDM || \
+		DEBUG_S3C64XX_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_BCMBCA || DEBUG_ASM9260_UART || \
+		DEBUG_DIGICOLOR_UA0 || \
+		DEBUG_AT91_UART || DEBUG_STM32_UART || \
+		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
+		DEBUG_STIH418_SBC_ASC0
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default 0 if FOOTBRIDGE || ARCH_IOP32X
+	default 0 if DEBUG_FOOTBRIDGE_COM1 || DEBUG_BCM_5301X || \
+		DEBUG_BCM_HR2
+	default 3 if DEBUG_MSTARV7_PMUART
 	default 2
 
 config DEBUG_UART_8250_WORD
 	bool "Use 32-bit accesses for 8250 UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	depends on DEBUG_UART_8250_SHIFT >= 2
-	default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
-		ARCH_KEYSTONE || \
-		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
-		DEBUG_DAVINCI_DA8XX_UART2 || \
-		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
-
-config DEBUG_UART_8250_FLOW_CONTROL
-	bool "Enable flow control for 8250 UART"
+	default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \
+		DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \
+		DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \
+		DEBUG_DAVINCI_DA8XX_UART1 || DEBUG_DAVINCI_DA8XX_UART2 || \
+		DEBUG_BCM_IPROC_UART3 || DEBUG_BCM_KONA_UART || \
+		DEBUG_RK32_UART2
+
+config DEBUG_UART_8250_PALMCHIP
+	bool "8250 UART is Palmchip BK-310x"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_GEMINI || ARCH_RPC
+	help
+	  Palmchip provides a UART implementation compatible with 16550
+	  except for having a different register layout.  Say Y here if
+	  the debug UART is of this type.
 
 config DEBUG_UNCOMPRESS
-	bool
-	depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG
-	default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
-		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM)
+	bool "Enable decompressor debugging via DEBUG_LL output"
+	depends on !ARCH_MULTIPLATFORM
+	depends on !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
+	depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
+		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
+		     !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING
 	help
-	  This option influences the normal decompressor output for
-	  multiplatform kernels.  Normally, multiplatform kernels disable
-	  decompressor output because it is not possible to know where to
-	  send the decompressor output.
-
-	  When this option is set, the selected DEBUG_LL output method
-	  will be re-used for normal decompressor output on multiplatform
-	  kernels.
-	  
+	  Say Y here to enable debug output in the decompressor code, using
+	  the selected DEBUG_LL output method.
 
 config UNCOMPRESS_INCLUDE
 	string
-	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
-					PLAT_SAMSUNG || ARCH_EFM32
-	default "mach/uncompress.h"
+	default "mach/uncompress.h" if ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100
+	default "debug/uncompress.h"
 
 config EARLY_PRINTK
 	bool "Early printk"
@@ -1297,14 +1828,6 @@ config EARLY_PRINTK
 	  kernel low-level debugging functions. Add earlyprintk to your
 	  kernel parameters to enable this console.
 
-config OC_ETM
-	bool "On-chip ETM and ETB"
-	depends on ARM_AMBA
-	help
-	  Enables the on-chip embedded trace macrocell and embedded trace
-	  buffer driver that will allow you to collect traces of the
-	  kernel code.
-
 config ARM_KPROBES_TEST
 	tristate "Kprobes test module"
 	depends on KPROBES && MODULES
@@ -1320,15 +1843,4 @@ config PID_IN_CONTEXTIDR
 	  additional instructions during context switch. Say Y here only if you
 	  are planning to use hardware trace tools with this kernel.
 
-config DEBUG_SET_MODULE_RONX
-	bool "Set loadable kernel module data as NX and text as RO"
-	depends on MODULES
-	---help---
-	  This option helps catch unintended modifications to loadable
-	  kernel module's text and read-only data. It also prevents execution
-	  of module data. Such protection may interfere with run-time code
-	  patching and dynamic kernel tracing - and they might also protect
-	  against certain classes of kernel exploits.
-	  If in doubt, say "N".
-
-endmenu
+source "drivers/hwtracing/coresight/Kconfig"
diff --git a/arch/arm/Kconfig.platforms b/arch/arm/Kconfig.platforms
new file mode 100644
index 000000000000..5c19c1f2cff6
--- /dev/null
+++ b/arch/arm/Kconfig.platforms
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+menu "Platform selection"
+	depends on MMU
+
+comment "CPU Core family selection"
+
+config ARCH_MULTI_V4
+	bool "ARMv4 based platforms (FA526, StrongARM)"
+	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
+	select ARCH_MULTI_V4_V5
+	select CPU_FA526 if !(CPU_SA110 || CPU_SA1100)
+
+config ARCH_MULTI_V4T
+	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
+	select ARCH_MULTI_V4_V5
+	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
+		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
+		CPU_ARM925T || CPU_ARM940T)
+
+config ARCH_MULTI_V5
+	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
+	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
+		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
+		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
+
+config ARCH_MULTI_V4_V5
+	bool
+
+config ARCH_MULTI_V6
+	bool "ARMv6 based platforms (ARM11)"
+	select ARCH_MULTI_V6_V7
+	select CPU_V6K
+
+config ARCH_MULTI_V7
+	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
+	default y
+	select ARCH_MULTI_V6_V7
+	select CPU_V7
+	select HAVE_SMP
+
+config ARCH_MULTI_V6_V7
+	bool
+	select MIGHT_HAVE_CACHE_L2X0
+
+config ARCH_MULTI_CPU_AUTO
+	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
+	select ARCH_MULTI_V5
+
+endmenu
+
+config ARCH_VIRT
+	bool "Dummy Virtual Machine"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V2M if PCI
+	select ARM_GIC_V3
+	select ARM_GIC_V3_ITS if PCI
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V3
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  Support for Airoha EN7523 SoCs
+
+config MACH_ASM9260
+	bool "Alphascale ASM9260"
+	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
+	select ASM9260_TIMER
+	help
+	  Support for Alphascale ASM9260 based platform.
+
+menuconfig ARCH_HPE
+	bool "HPE SoC support"
+	depends on ARCH_MULTI_V7
+	help
+	  This enables support for HPE ARM based BMC chips.
+
+if ARCH_HPE
+
+config ARCH_HPE_GXP
+	bool "HPE GXP SoC"
+	depends on ARCH_MULTI_V7
+	select ARM_VIC
+	select GENERIC_IRQ_CHIP
+	select CLKSRC_MMIO
+	help
+	  HPE GXP is the name of the HPE Soc. This SoC is used to implement many
+	  BMC features at HPE. It supports ARMv7 architecture based on the Cortex
+	  A9 core. It is capable of using an AXI bus to which a memory controller
+	  is attached. It has multiple SPI interfaces to connect boot flash and
+	  BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It
+	  has multiple i2c engines to drive connectivity with a host
+	  infrastructure.
+
+endif
+
+menuconfig ARCH_MOXART
+	bool "MOXA ART SoC"
+	depends on ARCH_MULTI_V4
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_FA526
+	select ARM_DMA_MEM_BUFFERABLE
+	select FARADAY_FTINTC010
+	select FTTMR010_TIMER
+	select GPIOLIB
+	select PHYLIB if NETDEVICES
+	help
+	  Say Y here if you want to run your kernel on hardware with a
+	  MOXA ART SoC.
+	  The MOXA ART SoC is based on a Faraday FA526 ARMv4 32-bit
+	  192 MHz CPU with MMU and 16KB/8KB D/I-cache (UC-7112-LX).
+	  Used on models UC-7101, UC-7112/UC-7110, IA240/IA241, IA3341.
+
+if ARCH_MOXART
+
+config MACH_UC7112LX
+	bool "MOXA UC-7112-LX"
+	depends on ARCH_MOXART
+	help
+	  Say Y here if you intend to run this kernel on a MOXA
+	  UC-7112-LX embedded computer.
+
+endif
+
+config ARCH_NSPIRE
+	bool "TI-NSPIRE based"
+	depends on ARCH_MULTI_V4T
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
+	select GENERIC_IRQ_CHIP
+	select ARM_AMBA
+	select ARM_VIC
+	select ARM_TIMER_SP804
+	select NSPIRE_TIMER
+	select POWER_RESET
+	select POWER_RESET_SYSCON
+	help
+	  This enables support for systems using the TI-NSPIRE CPU
+
+config ARCH_RDA
+	bool "RDA Micro SoCs"
+	depends on ARCH_MULTI_V7
+	select RDA_INTC
+	select RDA_TIMER
+	help
+	  This enables support for the RDA Micro 8810PL SoC family.
+
+menuconfig ARCH_SUNPLUS
+	bool "Sunplus SoCs"
+	depends on ARCH_MULTI_V7
+	help
+	  Support for Sunplus SoC family: SP7021 and succeeding SoC-based systems,
+	  such as the Banana Pi BPI-F2S development board (and derivatives).
+	  (<http://www.sinovoip.com.cn/ecp_view.asp?id=586>)
+	  (<https://tibbo.com/store/plus1.html>)
+
+if ARCH_SUNPLUS
+
+config SOC_SP7021
+	bool "Sunplus SP7021 SoC support"
+	default ARCH_SUNPLUS
+	select HAVE_ARM_ARCH_TIMER
+	select ARM_GIC
+	select ARM_PSCI
+	select PINCTRL
+	select PINCTRL_SPPCTL
+	select SERIAL_SUNPLUS if TTY
+	select SERIAL_SUNPLUS_CONSOLE if TTY
+	help
+	  Support for Sunplus SP7021 SoC. It is based on ARM 4-core
+	  Cortex-A7 with various peripherals (e.g.: I2C, SPI, SDIO,
+	  Ethernet, etc.), FPGA interface,  chip-to-chip bus.
+	  It is designed for industrial control.
+
+endif
+
+config ARCH_UNIPHIER
+	bool "Socionext UniPhier SoCs"
+	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_AMBA
+	select ARM_GLOBAL_TIMER
+	select ARM_GIC
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
+	select PINCTRL
+	select RESET_CONTROLLER
+	help
+	  Support for UniPhier SoC family developed by Socionext Inc.
+	  (formerly, System LSI Business Division of Panasonic Corporation)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 034a94904d69..b7de4b6b284c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -10,25 +10,23 @@
 #
 # Copyright (C) 1995-2001 by Russell King
 
-# Ensure linker flags are correct
-LDFLAGS		:=
-
-LDFLAGS_vmlinux	:=-p --no-undefined -X
+LDFLAGS_vmlinux	:= --no-undefined -X --pic-veneer -z norelro
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux	+= --be8
-LDFLAGS_MODULE	+= --be8
+KBUILD_LDFLAGS_MODULE	+= --be8
 endif
 
-OBJCOPYFLAGS	:=-O binary -R .comment -S
 GZFLAGS		:=-9
 #KBUILD_CFLAGS	+=-pipe
 
 # Never generate .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
 
-# Do not use arch/arm/defconfig - it's always outdated.
-# Select a platform tht is kept up-to-date
-KBUILD_DEFCONFIG := versatile_defconfig
+# Disable FDPIC ABI
+KBUILD_CFLAGS	+= $(call cc-option,-mno-fdpic)
+
+# This should work on most of the modern platforms
+KBUILD_DEFCONFIG := multi_v7_defconfig
 
 # defines filename extension depending memory management type.
 ifeq ($(CONFIG_MMU),)
@@ -37,64 +35,82 @@ KBUILD_CFLAGS	+= $(call cc-option,-mno-unaligned-access)
 endif
 
 ifeq ($(CONFIG_FRAME_POINTER),y)
-KBUILD_CFLAGS	+=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
+KBUILD_CFLAGS	+=-fno-omit-frame-pointer
+ifeq ($(CONFIG_CC_IS_GCC),y)
+KBUILD_CFLAGS += -mapcs -mno-sched-prolog
+endif
 endif
 
 ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
 KBUILD_CPPFLAGS	+= -mbig-endian
-AS		+= -EB
-LD		+= -EB
+CHECKFLAGS	+= -D__ARMEB__
+KBUILD_LDFLAGS	+= -EB
 else
 KBUILD_CPPFLAGS	+= -mlittle-endian
-AS		+= -EL
-LD		+= -EL
+CHECKFLAGS	+= -D__ARMEL__
+KBUILD_LDFLAGS	+= -EL
 endif
 
+#
+# The Scalar Replacement of Aggregates (SRA) optimization pass in GCC 4.9 and
+# later may result in code being generated that handles signed short and signed
+# char struct members incorrectly. So disable it.
+# (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65932)
+#
+KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
+
 # This selects which instruction set is used.
+arch-$(CONFIG_CPU_32v7M)	:=-march=armv7-m
+arch-$(CONFIG_CPU_32v7)		:=-march=armv7-a
+arch-$(CONFIG_CPU_32v6)		:=-march=armv6
+# Only override the compiler option if ARMv6. The ARMv6K extensions are
+# always available in ARMv7
+ifeq ($(CONFIG_CPU_32v6),y)
+arch-$(CONFIG_CPU_32v6K)	:=-march=armv6k
+endif
+arch-$(CONFIG_CPU_32v5)		:=-march=armv5te
+arch-$(CONFIG_CPU_32v4T)	:=-march=armv4t
+arch-$(CONFIG_CPU_32v4)		:=-march=armv4
+arch-$(CONFIG_CPU_32v3)		:=-march=armv3m
+
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+cpp-$(CONFIG_CPU_32v7M)		:=-D__LINUX_ARM_ARCH__=7
+cpp-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7
+cpp-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7
 ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+cpp-$(CONFIG_CPU_32v6K)		:=-D__LINUX_ARM_ARCH__=6
 endif
-arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
-arch-$(CONFIG_CPU_32v4T)	=-D__LINUX_ARM_ARCH__=4 -march=armv4t
-arch-$(CONFIG_CPU_32v4)		=-D__LINUX_ARM_ARCH__=4 -march=armv4
-arch-$(CONFIG_CPU_32v3)		=-D__LINUX_ARM_ARCH__=3 -march=armv3
-
-# Evaluate arch cc-option calls now
-arch-y := $(arch-y)
+cpp-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5
+cpp-$(CONFIG_CPU_32v4T)		:=-D__LINUX_ARM_ARCH__=4
+cpp-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4
+cpp-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3
 
 # This selects how we optimise for the processor.
-tune-$(CONFIG_CPU_ARM7TDMI)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM720T)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM740T)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM9TDMI)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM940T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E)	=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
-tune-$(CONFIG_CPU_ARM920T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM922T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM925T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM926T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_FA526)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_SA110)	=-mtune=strongarm110
-tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3)		=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON)	=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-
-# Evaluate tune cc-option calls now
-tune-y := $(tune-y)
+tune-$(CONFIG_CPU_ARM7TDMI)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM720T)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM740T)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM9TDMI)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM940T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM946E)	:=-mtune=arm9e
+tune-$(CONFIG_CPU_ARM920T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM925T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_FA526)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
+tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
+tune-$(CONFIG_CPU_XSCALE)	:=-mtune=xscale
+tune-$(CONFIG_CPU_XSC3)		:=-mtune=xscale
+tune-$(CONFIG_CPU_FEROCEON)	:=-mtune=xscale
+tune-$(CONFIG_CPU_V6)		:=-mtune=arm1136j-s
+tune-$(CONFIG_CPU_V6K)		:=-mtune=arm1136j-s
 
 ifeq ($(CONFIG_AEABI),y)
-CFLAGS_ABI	:=-mabi=aapcs-linux -mno-thumb-interwork -mfpu=vfp
+CFLAGS_ABI	:=-mabi=aapcs-linux -mfpu=vfp
 else
 CFLAGS_ABI	:=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
 endif
@@ -103,196 +119,171 @@ ifeq ($(CONFIG_ARM_UNWIND),y)
 CFLAGS_ABI	+=-funwind-tables
 endif
 
-ifeq ($(CONFIG_THUMB2_KERNEL),y)
-AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
+ifeq ($(CONFIG_CC_IS_CLANG),y)
+CFLAGS_ABI	+= -meabi gnu
+endif
+
+ifeq ($(CONFIG_CURRENT_POINTER_IN_TPIDRURO),y)
+KBUILD_CFLAGS	+= -mtp=cp15
+endif
+
+# Accept old syntax despite ".syntax unified"
 AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
-CFLAGS_ISA	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
+
+# The GCC option -ffreestanding is required in order to compile code containing
+# ARM/NEON intrinsics in a non C99-compliant environment (such as the kernel)
+CC_FLAGS_FPU	:= -ffreestanding
+# Enable <arm_neon.h>
+CC_FLAGS_FPU	+= -isystem $(shell $(CC) -print-file-name=include)
+CC_FLAGS_FPU	+= -march=armv7-a -mfloat-abi=softfp -mfpu=neon
+
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+CFLAGS_ISA	:=-Wa,-mimplicit-it=always $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA) -Wa$(comma)-mthumb
-# Work around buggy relocation from gas if requested:
-ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y)
-CFLAGS_MODULE	+=-fno-optimize-sibling-calls
-endif
+CFLAGS_ISA	+=-mthumb
 else
-CFLAGS_ISA	:=$(call cc-option,-marm,)
+CFLAGS_ISA	:=$(call cc-option,-marm,) $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA)
 endif
 
 # Need -Uarm for gcc < 3.x
+KBUILD_CPPFLAGS	+=$(cpp-y)
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) -Wa,$(arch-y) $(tune-y) -include $(srctree)/arch/arm/include/asm/unified.h -msoft-float
+KBUILD_RUSTFLAGS += --target=arm-unknown-linux-gnueabi
 
 CHECKFLAGS	+= -D__arm__
 
-#Default value
-head-y		:= arch/arm/kernel/head$(MMUEXT).o
-
 # Text offset. This list is sorted numerically by address in order to
 # provide a means to avoid/resolve conflicts in multi-arch kernels.
+# Note: the 32kB below this value is reserved for use by the kernel
+# during boot, and this offset is critical to the functioning of
+# kexec-tools.
 textofs-y	:= 0x00008000
-textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
-# We don't want the htc bootloader to corrupt kernel during resume
-textofs-$(CONFIG_PM_H1940)      := 0x00108000
+# RTD1195 has Boot ROM at start of address space
+textofs-$(CONFIG_ARCH_REALTEK)  := 0x00108000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
 ifeq ($(CONFIG_ARCH_SA1100),y)
 textofs-$(CONFIG_SA1111) := 0x00208000
 endif
-textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000
-textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
-textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
+textofs-$(CONFIG_ARCH_QCOM_RESERVE_SMEM) := 0x00208000
+textofs-$(CONFIG_ARCH_MESON) := 0x00208000
 textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_ACTIONS)		+= actions
+machine-$(CONFIG_ARCH_ALPINE)		+= alpine
+machine-$(CONFIG_ARCH_ARTPEC)		+= artpec
+machine-$(CONFIG_ARCH_ASPEED)           += aspeed
 machine-$(CONFIG_ARCH_AT91)		+= at91
 machine-$(CONFIG_ARCH_AXXIA)		+= axxia
 machine-$(CONFIG_ARCH_BCM)		+= bcm
 machine-$(CONFIG_ARCH_BERLIN)		+= berlin
 machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
-machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
 machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
+machine-$(CONFIG_ARCH_DIGICOLOR)	+= digicolor
 machine-$(CONFIG_ARCH_DOVE)		+= dove
-machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
-machine-$(CONFIG_ARCH_EFM32)		+= efm32
-machine-$(CONFIG_ARCH_EP93XX)		+= ep93xx
 machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
 machine-$(CONFIG_ARCH_FOOTBRIDGE)	+= footbridge
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_HISI)		+= hisi
-machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
-machine-$(CONFIG_ARCH_IOP13XX)		+= iop13xx
-machine-$(CONFIG_ARCH_IOP32X)		+= iop32x
-machine-$(CONFIG_ARCH_IOP33X)		+= iop33x
 machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
 machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
-machine-$(CONFIG_ARCH_KS8695)		+= ks8695
+machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MMP)		+= mmp
-machine-$(CONFIG_ARCH_MOXART)		+= moxart
-machine-$(CONFIG_ARCH_MSM)		+= msm
 machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 machine-$(CONFIG_ARCH_MXC)		+= imx
 machine-$(CONFIG_ARCH_MEDIATEK)		+= mediatek
+machine-$(CONFIG_ARCH_MILBEAUT)		+= milbeaut
 machine-$(CONFIG_ARCH_MXS)		+= mxs
-machine-$(CONFIG_ARCH_NETX)		+= netx
+machine-$(CONFIG_ARCH_MSTARV7)		+= mstar
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
-machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
+machine-$(CONFIG_ARCH_NPCM)		+= npcm
 machine-$(CONFIG_ARCH_OMAP1)		+= omap1
 machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
-machine-$(CONFIG_ARCH_PICOXCELL)	+= picoxcell
 machine-$(CONFIG_ARCH_PXA)		+= pxa
 machine-$(CONFIG_ARCH_QCOM)		+= qcom
-machine-$(CONFIG_ARCH_REALVIEW)		+= realview
+machine-$(CONFIG_ARCH_REALTEK)		+= realtek
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_ARCH_RPC)		+= rpc
-machine-$(CONFIG_ARCH_S3C24XX)		+= s3c24xx
-machine-$(CONFIG_ARCH_S3C64XX)		+= s3c64xx
+machine-$(CONFIG_PLAT_SAMSUNG)		+= s3c
 machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
-machine-$(CONFIG_ARCH_SHMOBILE) 	+= shmobile
-machine-$(CONFIG_ARCH_SIRF)		+= prima2
-machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
+machine-$(CONFIG_ARCH_RENESAS)	 	+= shmobile
+machine-$(CONFIG_ARCH_INTEL_SOCFPGA)	+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
+machine-$(CONFIG_ARCH_STM32)		+= stm32
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
-machine-$(CONFIG_ARCH_U300)		+= u300
 machine-$(CONFIG_ARCH_U8500)		+= ux500
-machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
-machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
 machine-$(CONFIG_ARCH_VT8500)		+= vt8500
-machine-$(CONFIG_ARCH_W90X900)		+= w90x900
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
+machine-$(CONFIG_PLAT_VERSATILE)	+= versatile
 machine-$(CONFIG_PLAT_SPEAR)		+= spear
 
-# Platform directory name.  This list is sorted alphanumerically
-# by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_EXYNOS)	+= samsung
-plat-$(CONFIG_ARCH_OMAP)	+= omap
-plat-$(CONFIG_ARCH_S3C64XX)	+= samsung
-plat-$(CONFIG_ARCH_S5PV210)	+= samsung
-plat-$(CONFIG_PLAT_IOP)		+= iop
-plat-$(CONFIG_PLAT_ORION)	+= orion
-plat-$(CONFIG_PLAT_PXA)		+= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	+= samsung
-plat-$(CONFIG_PLAT_VERSATILE)	+= versatile
-
-ifeq ($(CONFIG_ARCH_EBSA110),y)
-# This is what happens if you forget the IOCS16 line.
-# PCMCIA cards stop working.
-CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL
-export CFLAGS_3c589_cs.o
-endif
+# legacy platforms provide their own mach/*.h headers globally,
+# these three are mutually exclusive
+machdirs-$(CONFIG_ARCH_FOOTBRIDGE)	+= arch/arm/mach-footbridge
+machdirs-$(CONFIG_ARCH_RPC)		+= arch/arm/mach-rpc
+machdirs-$(CONFIG_ARCH_SA1100)		+= arch/arm/mach-sa1100
+KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%/include,$(machdirs-y))
 
 # The byte offset of the kernel image in RAM from the start of RAM.
 TEXT_OFFSET := $(textofs-y)
 
-# The first directory contains additional information for the boot setup code
-ifneq ($(machine-y),)
-MACHINE  := arch/arm/mach-$(word 1,$(machine-y))/
-else
-MACHINE  :=
-endif
-ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
-MACHINE  :=
-endif
-
-machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
-platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
-
-ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
-ifeq ($(KBUILD_SRC),)
-KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
-else
-KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
-endif
-endif
-
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
-# Do we have FASTFPE?
-FASTFPE		:=arch/arm/fastfpe
-ifeq ($(FASTFPE),$(wildcard $(FASTFPE)))
-FASTFPE_OBJ	:=$(FASTFPE)/
-endif
-
-core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
-core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
-core-$(CONFIG_VFP)		+= arch/arm/vfp/
-core-$(CONFIG_XEN)		+= arch/arm/xen/
-core-$(CONFIG_KVM_ARM_HOST) 	+= arch/arm/kvm/
-
 # If we have a machine-specific directory, then include it in the build.
-core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
-core-y				+= arch/arm/net/
-core-y				+= arch/arm/crypto/
-core-y				+= arch/arm/firmware/
-core-y				+= $(machdirs) $(platdirs)
+core-y				+= $(patsubst %,arch/arm/mach-%/,$(machine-y))
+# For cleaning
+core-				+= $(patsubst %,arch/arm/mach-%/,$(machine-))
 
-drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
+core-$(CONFIG_PLAT_ORION)	+= arch/arm/plat-orion/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
 
 # Default target when executing plain make
+boot := arch/arm/boot
 ifeq ($(CONFIG_XIP_KERNEL),y)
-KBUILD_IMAGE := xipImage
+KBUILD_IMAGE := $(boot)/xipImage
 else
-KBUILD_IMAGE := zImage
+KBUILD_IMAGE := $(boot)/zImage
 endif
 
-# Build the DT binary blobs if we have OF configured
-ifeq ($(CONFIG_USE_OF),y)
-KBUILD_DTBS := dtbs
+ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
+prepare: stack_protector_prepare
+ifeq ($(CONFIG_CC_HAVE_STACKPROTECTOR_TLS),y)
+stack_protector_prepare: prepare0
+	$(eval KBUILD_CFLAGS += \
+		-mstack-protector-guard=tls \
+		-mstack-protector-guard-offset=$(shell	\
+			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\
+				$(objtree)/include/generated/asm-offsets.h))
+else
+stack_protector_prepare: prepare0
+	$(eval SSP_PLUGIN_CFLAGS := \
+		-fplugin-arg-arm_ssp_per_task_plugin-offset=$(shell	\
+			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\
+				$(objtree)/include/generated/asm-offsets.h))
+	$(eval KBUILD_CFLAGS += $(SSP_PLUGIN_CFLAGS))
+	$(eval GCC_PLUGINS_CFLAGS += $(SSP_PLUGIN_CFLAGS))
+endif
 endif
 
-all:	$(KBUILD_IMAGE) $(KBUILD_DTBS)
+all:	$(notdir $(KBUILD_IMAGE))
 
-boot := arch/arm/boot
+
+archheaders:
+	$(Q)$(MAKE) $(build)=arch/arm/tools uapi
 
 archprepare:
-	$(Q)$(MAKE) $(build)=arch/arm/tools include/generated/mach-types.h
+	$(Q)$(MAKE) $(build)=arch/arm/tools kapi
 
 # Convert bzImage to zImage
 bzImage: zImage
@@ -302,27 +293,26 @@ INSTALL_TARGETS	= zinstall uinstall install
 
 PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS)
 
+bootpImage uImage: zImage
+zImage: Image
+
 $(BOOT_TARGETS): vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+	@$(kecho) '  Kernel: $(boot)/$@ is ready'
 
+$(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@)
 $(INSTALL_TARGETS):
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
-
-%.dtb: | scripts
-	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
-
-PHONY += dtbs dtbs_install
-dtbs dtbs_install: prepare scripts
-	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $@
+	$(call cmd,install)
 
-# We use MRPROPER_FILES and CLEAN_FILES now
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
+vdso-install-$(CONFIG_VDSO) += arch/arm/vdso/vdso.so.dbg
 
 # My testing targets (bypasses dependencies)
-bp:;	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage
-i zi:;	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
+bp:;	$(Q)$(MAKE) $(build)=$(boot) $(boot)/bootpImage
 
+include $(srctree)/scripts/Makefile.defconf
+PHONY += multi_v7_lpae_defconfig
+multi_v7_lpae_defconfig:
+	$(call merge_into_defconfig,multi_v7_defconfig,lpae)
 
 define archhelp
   echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
@@ -331,12 +321,12 @@ define archhelp
   echo  '  uImage        - U-Boot wrapped zImage'
   echo  '  bootpImage    - Combined zImage and initial RAM disk'
   echo  '                  (supply initrd image via make variable INITRD=<path>)'
-  echo  '* dtbs          - Build device tree blobs for enabled boards'
-  echo  '  dtbs_install  - Install dtbs to $(INSTALL_DTBS_PATH)'
   echo  '  install       - Install uncompressed kernel'
   echo  '  zinstall      - Install compressed kernel'
   echo  '  uinstall      - Install U-Boot wrapped compressed kernel'
   echo  '                  Install using (your) ~/bin/$(INSTALLKERNEL) or'
   echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
+  echo
+  echo  '  multi_v7_lpae_defconfig     - multi_v7_defconfig with CONFIG_ARM_LPAE enabled'
 endef
diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore
index 3c79f85975aa..8c759326baf4 100644
--- a/arch/arm/boot/.gitignore
+++ b/arch/arm/boot/.gitignore
@@ -1,6 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
 Image
 zImage
 xipImage
 bootpImage
 uImage
-*.dtb
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index ec2f8065f955..ba9b9a802469 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -10,28 +10,34 @@
 #
 # Copyright (C) 1995-2002 Russell King
 #
+OBJCOPYFLAGS	:=-O binary -R .comment -S
 
-ifneq ($(MACHINE),)
-include $(srctree)/$(MACHINE)/Makefile.boot
-endif
-
-# Note: the following conditions must always be true:
 #   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
-#   PARAMS_PHYS must be within 4MB of ZRELADDR
-#   INITRD_PHYS must be in RAM
-ZRELADDR    := $(zreladdr-y)
-PARAMS_PHYS := $(params_phys-y)
-INITRD_PHYS := $(initrd_phys-y)
+ifdef CONFIG_PHYS_OFFSET
+add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
+ZRELADDR    := $(call add_hex, $(CONFIG_PHYS_OFFSET), $(TEXT_OFFSET))
+endif
 
-export ZRELADDR INITRD_PHYS PARAMS_PHYS
+PHYS_OFFSET := $(CONFIG_PHYS_OFFSET)
+export ZRELADDR PARAMS_PHYS PHYS_OFFSET
 
 targets := Image zImage xipImage bootpImage uImage
 
 ifeq ($(CONFIG_XIP_KERNEL),y)
 
+cmd_deflate_xip_data = $(CONFIG_SHELL) -c '$(src)/deflate_xip_data.sh $< $@'
+
+ifeq ($(CONFIG_XIP_DEFLATED_DATA),y)
+quiet_cmd_mkxip = XIPZ    $@
+cmd_mkxip = $(cmd_objcopy) && $(cmd_deflate_xip_data)
+else
+quiet_cmd_mkxip = $(quiet_cmd_objcopy)
+cmd_mkxip = $(cmd_objcopy)
+endif
+
 $(obj)/xipImage: vmlinux FORCE
-	$(call if_changed,objcopy)
-	@$(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
+	$(call if_changed,mkxip)
+	@$(kecho) '  Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
 
 $(obj)/Image $(obj)/zImage: FORCE
 	@echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
@@ -46,14 +52,12 @@ $(obj)/xipImage: FORCE
 
 $(obj)/Image: vmlinux FORCE
 	$(call if_changed,objcopy)
-	@$(kecho) '  Kernel: $@ is ready'
 
 $(obj)/compressed/vmlinux: $(obj)/Image FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
 $(obj)/zImage:	$(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
-	@$(kecho) '  Kernel: $@ is ready'
 
 endif
 
@@ -78,41 +82,11 @@ fi
 $(obj)/uImage:	$(obj)/zImage FORCE
 	@$(check_for_multiple_loadaddr)
 	$(call if_changed,uimage)
-	@$(kecho) '  Image $@ is ready'
 
-$(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
+$(obj)/bootp/bootp: $(obj)/zImage FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
-	@:
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
-	@$(kecho) '  Kernel: $@ is ready'
-
-PHONY += initrd FORCE
-initrd:
-	@test "$(INITRD_PHYS)" != "" || \
-	(echo This machine does not support INITRD; exit -1)
-	@test "$(INITRD)" != "" || \
-	(echo You must specify INITRD; exit -1)
-
-install:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/Image System.map "$(INSTALL_PATH)"
-
-zinstall:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/zImage System.map "$(INSTALL_PATH)"
-
-uinstall:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/uImage System.map "$(INSTALL_PATH)"
-
-zi:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/zImage System.map "$(INSTALL_PATH)"
-
-i:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/Image System.map "$(INSTALL_PATH)"
 
 subdir-	    := bootp compressed dts
diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile
index 5761f0039133..f3443f7d7b02 100644
--- a/arch/arm/boot/bootp/Makefile
+++ b/arch/arm/boot/bootp/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # linux/arch/arm/boot/bootp/Makefile
 #
@@ -5,9 +6,39 @@
 # architecture-specific flags and dependencies.
 #
 
-GCOV_PROFILE	:= n
+ifdef PHYS_OFFSET
+add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
 
-LDFLAGS_bootp	:=-p --no-undefined -X \
+# If PHYS_OFFSET is set, INITRD_PHYS and PARAMS_PHYS can be derived,
+# otherwise they must be passed on the command line.
+#
+# Note: the following conditions must always be true:
+#   PARAMS_PHYS must be within 4MB of ZRELADDR
+#   INITRD_PHYS must be in RAM
+
+PARAMS_PHYS := $(call add_hex, $(PHYS_OFFSET), 0x100)
+
+# guess an initrd location if possible
+initrd_offset-$(CONFIG_ARCH_FOOTBRIDGE)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_SA1100)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_RPC)	+= 0x08000000
+INITRD_OFFSET := $(initrd_offset-y)
+ifdef INITRD_OFFSET
+INITRD_PHYS := $(call add_hex, $(PHYS_OFFSET), $(INITRD_OFFSET))
+endif
+
+endif
+
+PHONY += initrd
+initrd:
+	@test "$(PARAMS_PHYS)" != "" || \
+	(echo bootpImage: You must specify PHYS_OFFSET of PARAMS_PHYS ; exit -1)
+	@test "$(INITRD_PHYS)" != "" || \
+	(echo bootpImage: You must specify INITRD_OFFSET or INITRD_PHYS ; exit -1)
+	@test "$(INITRD)" != "" || \
+	(echo bootpImage: You must specify INITRD; exit -1)
+
+LDFLAGS_bootp	:= --no-undefined -X \
 		 --defsym initrd_phys=$(INITRD_PHYS) \
 		 --defsym params_phys=$(PARAMS_PHYS) -T
 AFLAGS_initrd.o :=-DINITRD=\"$(INITRD)\"
@@ -17,13 +48,12 @@ targets	:= bootp init.o kernel.o initrd.o
 # Note that bootp.lds picks up kernel.o and initrd.o
 $(obj)/bootp:	$(src)/bootp.lds $(addprefix $(obj)/,init.o kernel.o initrd.o) FORCE
 	$(call if_changed,ld)
-	@:
 
 # kernel.o and initrd.o includes a binary image using
 # .incbin, a dependency which is not tracked automatically
 
 $(obj)/kernel.o: arch/arm/boot/zImage FORCE
 
-$(obj)/initrd.o: $(INITRD) FORCE
+$(obj)/initrd.o: initrd $(INITRD) FORCE
 
-PHONY += $(INITRD) FORCE
+PHONY += $(INITRD)
diff --git a/arch/arm/boot/bootp/bootp.lds b/arch/arm/boot/bootp/bootp.lds
index fc54394f4340..160128186bf8 100644
--- a/arch/arm/boot/bootp/bootp.lds
+++ b/arch/arm/boot/bootp/bootp.lds
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/boot/bootp/bootp.lds
  *
  *  Copyright (C) 2000-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 OUTPUT_ARCH(arm)
 ENTRY(_start)
diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S
index 78b508075161..b562da2f7040 100644
--- a/arch/arm/boot/bootp/init.S
+++ b/arch/arm/boot/bootp/init.S
@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/boot/bootp/init.S
  *
  *  Copyright (C) 2000-2003 Russell King.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  *  "Header" file for splitting kernel + initrd.  Note that we pass
  *  r0 through to r3 straight through.
  *
@@ -16,7 +13,7 @@
  *  size immediately following the kernel, we could build this into
  *  a binary blob, and concatenate the zImage using the cat command.
  */
-		.section .start,#alloc,#execinstr
+		.section .start, "ax"
 		.type	_start, #function
 		.globl	_start
 
@@ -44,7 +41,7 @@ _start:		add	lr, pc, #-0x8		@ lr = current load addr
  */
 		movne	r10, #0			@ terminator
 		movne	r4, #2			@ Size of this entry (2 words)
-		stmneia	r9, {r4, r5, r10}	@ Size, ATAG_CORE, terminator
+		stmiane	r9, {r4, r5, r10}	@ Size, ATAG_CORE, terminator
 
 /*
  * find the end of the tag list, and then add an INITRD tag on the end.
diff --git a/arch/arm/boot/bootp/initrd.S b/arch/arm/boot/bootp/initrd.S
index d81ea183785c..dd3d04971c42 100644
--- a/arch/arm/boot/bootp/initrd.S
+++ b/arch/arm/boot/bootp/initrd.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 	.type	initrd_start,#object
 	.globl	initrd_start
 initrd_start:
diff --git a/arch/arm/boot/bootp/kernel.S b/arch/arm/boot/bootp/kernel.S
index b87a25c7ef88..dc6236c173d2 100644
--- a/arch/arm/boot/bootp/kernel.S
+++ b/arch/arm/boot/bootp/kernel.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 	.globl	kernel_start
 kernel_start:
 	.incbin	"arch/arm/boot/zImage"
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index 0714e0334e33..d32f41778437 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1,21 +1,4 @@
-ashldi3.S
-bswapsdi2.S
-font.c
-lib1funcs.S
-hyp-stub.S
-piggy.gzip
-piggy.lzo
-piggy.lzma
-piggy.xzkern
-piggy.lz4
+# SPDX-License-Identifier: GPL-2.0-only
+piggy_data
 vmlinux
 vmlinux.lds
-
-# borrowed libfdt files
-fdt.c
-fdt.h
-fdt_ro.c
-fdt_rw.c
-fdt_wip.c
-libfdt.h
-libfdt_internal.h
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 3ea230aa94b7..a159120d1e42 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # linux/arch/arm/boot/compressed/Makefile
 #
@@ -6,28 +7,12 @@
 
 OBJS		=
 
-# Ensure that MMCIF loader code appears early in the image
-# to minimise that number of bocks that have to be read in
-# order to load it.
-ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y)
-OBJS		+= mmcif-sh7372.o
-endif
-
-# Ensure that SDHI loader code appears early in the image
-# to minimise that number of bocks that have to be read in
-# order to load it.
-ifeq ($(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI),y)
-OBJS		+= sdhi-shmobile.o
-OBJS		+= sdhi-sh7372.o
-endif
-
-AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
 HEAD	= head.o
 OBJS	+= misc.o decompress.o
 ifeq ($(CONFIG_DEBUG_UNCOMPRESS),y)
 OBJS	+= debug.o
+AFLAGS_head.o += -DDEBUG
 endif
-FONTC	= $(srctree)/lib/fonts/font_acorn_8x8.c
 
 # string library code (-Os is enforced to keep it much smaller)
 OBJS		+= string.o
@@ -37,8 +22,6 @@ ifeq ($(CONFIG_ARM_VIRT_EXT),y)
 OBJS		+= hyp-stub.o
 endif
 
-GCOV_PROFILE		:= n
-
 #
 # Architecture dependencies
 #
@@ -66,10 +49,6 @@ else
 endif
 endif
 
-ifeq ($(CONFIG_ARCH_SHMOBILE_LEGACY),y)
-OBJS		+= head-shmobile.o
-endif
-
 #
 # We now have a PIC decompressor implementation.  Decompressors running
 # from RAM should not define ZTEXTADDR.  Decompressors running directly
@@ -83,52 +62,48 @@ ZTEXTADDR	:= 0
 ZBSSADDR	:= ALIGN(8)
 endif
 
-CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)"
-
-suffix_$(CONFIG_KERNEL_GZIP) = gzip
-suffix_$(CONFIG_KERNEL_LZO)  = lzo
-suffix_$(CONFIG_KERNEL_LZMA) = lzma
-suffix_$(CONFIG_KERNEL_XZ)   = xzkern
-suffix_$(CONFIG_KERNEL_LZ4)  = lz4
+MALLOC_SIZE	:= 65536
 
-# Borrowed libfdt files for the ATAG compatibility mode
-
-libfdt		:= fdt_rw.c fdt_ro.c fdt_wip.c fdt.c
-libfdt_hdrs	:= fdt.h libfdt.h libfdt_internal.h
-
-libfdt_objs	:= $(addsuffix .o, $(basename $(libfdt)))
+AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET) -DMALLOC_SIZE=$(MALLOC_SIZE)
+CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)"
+CPPFLAGS_vmlinux.lds += -DTEXT_OFFSET="$(TEXT_OFFSET)"
+CPPFLAGS_vmlinux.lds += -DMALLOC_SIZE="$(MALLOC_SIZE)"
 
-$(addprefix $(obj)/,$(libfdt) $(libfdt_hdrs)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
-	$(call cmd,shipped)
+compress-$(CONFIG_KERNEL_GZIP) = gzip
+compress-$(CONFIG_KERNEL_LZO)  = lzo_with_size
+compress-$(CONFIG_KERNEL_LZMA) = lzma_with_size
+compress-$(CONFIG_KERNEL_XZ)   = xzkern_with_size
+compress-$(CONFIG_KERNEL_LZ4)  = lz4_with_size
 
-$(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \
-	$(addprefix $(obj)/,$(libfdt_hdrs))
+libfdt_objs := fdt_rw.o fdt_ro.o fdt_wip.o fdt.o
 
 ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+CFLAGS_REMOVE_atags_to_fdt.o += -Wframe-larger-than=${CONFIG_FRAME_WARN}
+CFLAGS_atags_to_fdt.o += -Wframe-larger-than=1280
 OBJS	+= $(libfdt_objs) atags_to_fdt.o
 endif
+ifeq ($(CONFIG_USE_OF),y)
+OBJS	+= $(libfdt_objs) fdt_check_mem_start.o
+endif
 
-targets       := vmlinux vmlinux.lds \
-		 piggy.$(suffix_y) piggy.$(suffix_y).o \
-		 lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S bswapsdi2.o \
-		 bswapsdi2.S font.o font.c head.o misc.o $(OBJS)
+OBJS	+= lib1funcs.o ashldi3.o bswapsdi2.o
 
-# Make sure files are removed during clean
-extra-y       += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \
-		 lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \
-		 hyp-stub.S
+targets       := vmlinux vmlinux.lds piggy_data piggy.o \
+		 head.o $(OBJS)
 
-ifeq ($(CONFIG_FUNCTION_TRACER),y)
-ORIG_CFLAGS := $(KBUILD_CFLAGS)
-KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
-endif
+KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 
-ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
+ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \
+	     -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
+	     $(DISABLE_KSTACK_ERASE) \
+	     -I$(obj)
+ccflags-remove-$(CONFIG_FUNCTION_TRACER) += -pg
 asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
-		awk 'END{print $$3}')
+KBSS_SZ = $(shell echo $$(($$($(NM) vmlinux | \
+		sed -n -e 's/^\([^ ]*\) [ABD] __bss_start$$/-0x\1/p' \
+		       -e 's/^\([^ ]*\) [ABD] __bss_stop$$/+0x\1/p') )) )
 LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)
@@ -137,33 +112,17 @@ endif
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux += --be8
 endif
-# ?
-LDFLAGS_vmlinux += -p
 # Report unresolved symbol references
 LDFLAGS_vmlinux += --no-undefined
 # Delete all temporary local symbols
 LDFLAGS_vmlinux += -X
+# Report orphan sections
+ifdef CONFIG_LD_ORPHAN_WARN
+LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
+endif
 # Next argument is a linker script
 LDFLAGS_vmlinux += -T
 
-# For __aeabi_uidivmod
-lib1funcs = $(obj)/lib1funcs.o
-
-$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S
-	$(call cmd,shipped)
-
-# For __aeabi_llsl
-ashldi3 = $(obj)/ashldi3.o
-
-$(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S
-	$(call cmd,shipped)
-
-# For __bswapsi2, __bswapdi2
-bswapsdi2 = $(obj)/bswapsdi2.o
-
-$(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S
-	$(call cmd,shipped)
-
 # We need to prevent any GOTOFF relocs being used with references
 # to symbols in the .bss section since we cannot relocate them
 # independently from the rest at run time.  This can be achieved by
@@ -172,10 +131,10 @@ $(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S
 # The .data section is already discarded by the linker script so no need
 # to bother about it here.
 check_for_bad_syms = \
-bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
+bad_syms=$$($(NM) $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
 [ -z "$$bad_syms" ] || \
   ( echo "following symbols must have non local/private scope:" >&2; \
-    echo "$$bad_syms" >&2; rm -f $@; false )
+    echo "$$bad_syms" >&2; false )
 
 check_for_multiple_zreladdr = \
 if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
@@ -184,22 +143,18 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
 	false; \
 fi
 
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
-		$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
-		$(bswapsdi2) FORCE
+efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a
+
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
+		$(addprefix $(obj)/, $(OBJS)) \
+		$(efi-obj-y) FORCE
 	@$(check_for_multiple_zreladdr)
 	$(call if_changed,ld)
 	@$(check_for_bad_syms)
 
-$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
-	$(call if_changed,$(suffix_y))
+$(obj)/piggy_data: $(obj)/../Image FORCE
+	$(call if_changed,$(compress-y))
 
-$(obj)/piggy.$(suffix_y).o:  $(obj)/piggy.$(suffix_y) FORCE
+$(obj)/piggy.o: $(obj)/piggy_data
 
 CFLAGS_font.o := -Dstatic=
-
-$(obj)/font.c: $(FONTC)
-	$(call cmd,shipped)
-
-$(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S
-	$(call cmd,shipped)
diff --git a/arch/arm/boot/compressed/ashldi3.S b/arch/arm/boot/compressed/ashldi3.S
new file mode 100644
index 000000000000..216f82eda609
--- /dev/null
+++ b/arch/arm/boot/compressed/ashldi3.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __aeabi_llsl */
+#include "../../lib/ashldi3.S"
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
index 9448aa0c6686..627752f18661 100644
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -1,5 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/libfdt_env.h>
 #include <asm/setup.h>
 #include <libfdt.h>
+#include "misc.h"
 
 #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
 #define do_extend_cmdline 1
@@ -13,12 +16,13 @@ static int node_offset(void *fdt, const char *node_path)
 {
 	int offset = fdt_path_offset(fdt, node_path);
 	if (offset == -FDT_ERR_NOTFOUND)
-		offset = fdt_add_subnode(fdt, 0, node_path);
+		/* Add the node to root if not found, dropping the leading '/' */
+		offset = fdt_add_subnode(fdt, 0, node_path + 1);
 	return offset;
 }
 
 static int setprop(void *fdt, const char *node_path, const char *property,
-		   uint32_t *val_array, int size)
+		   void *val_array, int size)
 {
 	int offset = node_offset(fdt, node_path);
 	if (offset < 0)
@@ -59,7 +63,7 @@ static uint32_t get_cell_size(const void *fdt)
 {
 	int len;
 	uint32_t cell_size = 1;
-	const uint32_t *size_len =  getprop(fdt, "/", "#size-cells", &len);
+	const __be32 *size_len =  getprop(fdt, "/", "#size-cells", &len);
 
 	if (size_len)
 		cell_size = fdt32_to_cpu(*size_len);
@@ -97,10 +101,28 @@ static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
 	setprop_string(fdt, "/chosen", "bootargs", cmdline);
 }
 
+static void hex_str(char *out, uint32_t value)
+{
+	uint32_t digit;
+	int idx;
+
+	for (idx = 7; idx >= 0; idx--) {
+		digit = value >> 28;
+		value <<= 4;
+		digit &= 0xf;
+		if (digit < 10)
+			digit += '0';
+		else
+			digit += 'A'-10;
+		*out++ = digit;
+	}
+	*out = '\0';
+}
+
 /*
  * Convert and fold provided ATAGs into the provided FDT.
  *
- * REturn values:
+ * Return values:
  *    = 0 -> pretend success
  *    = 1 -> bad ATAG (may retry with another possible ATAG pointer)
  *    < 0 -> error from libfdt
@@ -110,7 +132,7 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 	struct tag *atag = atag_list;
 	/* In the case of 64 bits memory size, need to reserve 2 cells for
 	 * address and size for each bank */
-	uint32_t mem_reg_property[2 * 2 * NR_BANKS];
+	__be32 mem_reg_property[2 * 2 * NR_BANKS];
 	int memcount = 0;
 	int ret, memsize;
 
@@ -119,7 +141,7 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 		return 1;
 
 	/* if we get a DTB here we're done already */
-	if (*(u32 *)atag_list == fdt32_to_cpu(FDT_MAGIC))
+	if (*(__be32 *)atag_list == cpu_to_fdt32(FDT_MAGIC))
 	       return 0;
 
 	/* validate the ATAG */
@@ -158,8 +180,8 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 				/* if memsize is 2, that means that
 				 * each data needs 2 cells of 32 bits,
 				 * so the data are 64 bits */
-				uint64_t *mem_reg_prop64 =
-					(uint64_t *)mem_reg_property;
+				__be64 *mem_reg_prop64 =
+					(__be64 *)mem_reg_property;
 				mem_reg_prop64[memcount++] =
 					cpu_to_fdt64(atag->u.mem.start);
 				mem_reg_prop64[memcount++] =
@@ -179,6 +201,11 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 					initrd_start);
 			setprop_cell(fdt, "/chosen", "linux,initrd-end",
 					initrd_start + initrd_size);
+		} else if (atag->hdr.tag == ATAG_SERIAL) {
+			char serno[16+2];
+			hex_str(serno, atag->u.serialnr.high);
+			hex_str(serno+8, atag->u.serialnr.low);
+			setprop_string(fdt, "/", "serial-number", serno);
 		}
 	}
 
diff --git a/arch/arm/boot/compressed/big-endian.S b/arch/arm/boot/compressed/big-endian.S
index 25ab26f1c6f0..0e092c36da2f 100644
--- a/arch/arm/boot/compressed/big-endian.S
+++ b/arch/arm/boot/compressed/big-endian.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  *  linux/arch/arm/boot/compressed/big-endian.S
  *
@@ -5,7 +6,7 @@
  *  Author: Nicolas Pitre
  */
 
-	.section ".start", #alloc, #execinstr
+	.section ".start", "ax"
 
 	mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 	orr	r0, r0, #(1 << 7)	@ enable big endian mode
diff --git a/arch/arm/boot/compressed/bswapsdi2.S b/arch/arm/boot/compressed/bswapsdi2.S
new file mode 100644
index 000000000000..b2156b378c7b
--- /dev/null
+++ b/arch/arm/boot/compressed/bswapsdi2.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __bswapsi2, __bswapdi2 */
+#include "../../lib/bswapsdi2.S"
diff --git a/arch/arm/boot/compressed/debug.S b/arch/arm/boot/compressed/debug.S
index 5392ee63338f..fac40a717fcf 100644
--- a/arch/arm/boot/compressed/debug.S
+++ b/arch/arm/boot/compressed/debug.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
@@ -7,7 +8,10 @@
 
 ENTRY(putc)
 	addruart r1, r2, r3
-	waituart r3, r1
+#ifdef CONFIG_DEBUG_UART_FLOW_CONTROL
+	waituartcts r3, r1
+#endif
+	waituarttxrdy r3, r1
 	senduart r0, r1
 	busyuart r3, r1
 	mov	 pc, lr
@@ -23,7 +27,11 @@ ENTRY(putc)
 	strb	r0, [r1]
 	mov	r0, #0x03		@ SYS_WRITEC
    ARM(	svc	#0x123456	)
+#ifdef CONFIG_CPU_V7M
+ THUMB(	bkpt	#0xab		)
+#else
  THUMB(	svc	#0xab		)
+#endif
 	mov	pc, lr
 	.align	2
 1:	.word	_GLOBAL_OFFSET_TABLE_ - .
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
index bd245d34952d..0669851394f0 100644
--- a/arch/arm/boot/compressed/decompress.c
+++ b/arch/arm/boot/compressed/decompress.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #define _LINUX_STRING_H_
 
 #include <linux/compiler.h>	/* for inline */
@@ -5,10 +6,7 @@
 #include <linux/stddef.h>	/* for NULL */
 #include <linux/linkage.h>
 #include <asm/string.h>
-
-extern unsigned long free_mem_ptr;
-extern unsigned long free_mem_end_ptr;
-extern void error(char *);
+#include "misc.h"
 
 #define STATIC static
 #define STATIC_RW_DATA	/* non-static please */
@@ -32,6 +30,10 @@ extern void error(char *);
 
 /* Not needed, but used in some headers pulled in by decompressors */
 extern char * strstr(const char * s1, const char *s2);
+extern size_t strlen(const char *s);
+extern int strcmp(const char *cs, const char *ct);
+extern int memcmp(const void *cs, const void *ct, size_t count);
+extern char * strchrnul(const char *, int);
 
 #ifdef CONFIG_KERNEL_GZIP
 #include "../../../../lib/decompress_inflate.c"
@@ -46,7 +48,10 @@ extern char * strstr(const char * s1, const char *s2);
 #endif
 
 #ifdef CONFIG_KERNEL_XZ
+/* Prevent KASAN override of string helpers in decompressor */
+#undef memmove
 #define memmove memmove
+#undef memcpy
 #define memcpy memcpy
 #include "../../../../lib/decompress_unxz.c"
 #endif
@@ -57,5 +62,5 @@ extern char * strstr(const char * s1, const char *s2);
 
 int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
 {
-	return decompress(input, len, NULL, NULL, output, NULL, error);
+	return __decompress(input, len, NULL, NULL, output, 0, NULL, error);
 }
diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S
new file mode 100644
index 000000000000..65a3025c0e13
--- /dev/null
+++ b/arch/arm/boot/compressed/efi-header.S
@@ -0,0 +1,136 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013-2017 Linaro Ltd
+ * Authors: Roy Franz <roy.franz@linaro.org>
+ *          Ard Biesheuvel <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/pe.h>
+#include <linux/sizes.h>
+
+		.macro	__nop
+ AR_CLASS(	mov	r0, r0		)
+  M_CLASS(	nop.w			)
+		.endm
+
+		.macro __initial_nops
+#ifdef CONFIG_EFI_STUB
+		@ This is a two-instruction NOP, which happens to bear the
+		@ PE/COFF signature "MZ" in the first two bytes, so the kernel
+		@ is accepted as an EFI binary. Booting via the UEFI stub
+		@ will not execute those instructions, but the ARM/Linux
+		@ boot protocol does, so we need some NOPs here.
+		.inst	IMAGE_DOS_SIGNATURE | (0xe225 << 16) @ eor r5, r5, 0x4d000
+		eor	r5, r5, 0x4d000			@ undo previous insn
+#else
+		__nop
+		__nop
+#endif
+		.endm
+
+		.macro	__EFI_HEADER
+#ifdef CONFIG_EFI_STUB
+		.set	start_offset, __efi_start - start
+		.org	start + 0x3c
+		@
+		@ The PE header can be anywhere in the file, but for
+		@ simplicity we keep it together with the MSDOS header
+		@ The offset to the PE/COFF header needs to be at offset
+		@ 0x3C in the MSDOS header.
+		@ The only 2 fields of the MSDOS header that are used are this
+		@ PE/COFF offset, and the "MZ" bytes at offset 0x0.
+		@
+		.long	pe_header - start		@ Offset to the PE header.
+
+pe_header:
+		.long	IMAGE_NT_SIGNATURE
+
+coff_header:
+		.short	IMAGE_FILE_MACHINE_THUMB	@ Machine
+		.short	section_count			@ NumberOfSections
+		.long	0 				@ TimeDateStamp
+		.long	0				@ PointerToSymbolTable
+		.long	0				@ NumberOfSymbols
+		.short	section_table - optional_header	@ SizeOfOptionalHeader
+		.short	IMAGE_FILE_32BIT_MACHINE | \
+			IMAGE_FILE_DEBUG_STRIPPED | \
+			IMAGE_FILE_EXECUTABLE_IMAGE | \
+			IMAGE_FILE_LINE_NUMS_STRIPPED	@ Characteristics
+
+#define __pecoff_code_size (__pecoff_data_start - __efi_start)
+
+optional_header:
+		.short	IMAGE_NT_OPTIONAL_HDR32_MAGIC	@ PE32 format
+		.byte	0x02				@ MajorLinkerVersion
+		.byte	0x14				@ MinorLinkerVersion
+		.long	__pecoff_code_size		@ SizeOfCode
+		.long	__pecoff_data_size		@ SizeOfInitializedData
+		.long	0				@ SizeOfUninitializedData
+		.long	efi_pe_entry - start		@ AddressOfEntryPoint
+		.long	start_offset			@ BaseOfCode
+		.long	__pecoff_data_start - start	@ BaseOfData
+
+extra_header_fields:
+		.long	0				@ ImageBase
+		.long	SZ_4K				@ SectionAlignment
+		.long	SZ_512				@ FileAlignment
+		.short	0				@ MajorOsVersion
+		.short	0				@ MinorOsVersion
+		.short	LINUX_EFISTUB_MAJOR_VERSION	@ MajorImageVersion
+		.short	LINUX_EFISTUB_MINOR_VERSION	@ MinorImageVersion
+		.short	0				@ MajorSubsystemVersion
+		.short	0				@ MinorSubsystemVersion
+		.long	0				@ Win32VersionValue
+
+		.long	__pecoff_end - start		@ SizeOfImage
+		.long	start_offset			@ SizeOfHeaders
+		.long	0				@ CheckSum
+		.short	IMAGE_SUBSYSTEM_EFI_APPLICATION	@ Subsystem
+		.short	0				@ DllCharacteristics
+		.long	0				@ SizeOfStackReserve
+		.long	0				@ SizeOfStackCommit
+		.long	0				@ SizeOfHeapReserve
+		.long	0				@ SizeOfHeapCommit
+		.long	0				@ LoaderFlags
+		.long	(section_table - .) / 8		@ NumberOfRvaAndSizes
+
+		.quad	0				@ ExportTable
+		.quad	0				@ ImportTable
+		.quad	0				@ ResourceTable
+		.quad	0				@ ExceptionTable
+		.quad	0				@ CertificationTable
+		.quad	0				@ BaseRelocationTable
+
+section_table:
+		.ascii	".text\0\0\0"
+		.long	__pecoff_code_size		@ VirtualSize
+		.long	__efi_start			@ VirtualAddress
+		.long	__pecoff_code_size		@ SizeOfRawData
+		.long	__efi_start			@ PointerToRawData
+		.long	0				@ PointerToRelocations
+		.long	0				@ PointerToLineNumbers
+		.short	0				@ NumberOfRelocations
+		.short	0				@ NumberOfLineNumbers
+		.long	IMAGE_SCN_CNT_CODE | \
+			IMAGE_SCN_MEM_READ | \
+			IMAGE_SCN_MEM_EXECUTE		@ Characteristics
+
+		.ascii	".data\0\0\0"
+		.long	__pecoff_data_size		@ VirtualSize
+		.long	__pecoff_data_start - start	@ VirtualAddress
+		.long	__pecoff_data_rawsize		@ SizeOfRawData
+		.long	__pecoff_data_start - start	@ PointerToRawData
+		.long	0				@ PointerToRelocations
+		.long	0				@ PointerToLineNumbers
+		.short	0				@ NumberOfRelocations
+		.short	0				@ NumberOfLineNumbers
+		.long	IMAGE_SCN_CNT_INITIALIZED_DATA | \
+			IMAGE_SCN_MEM_READ | \
+			IMAGE_SCN_MEM_WRITE		@ Characteristics
+
+		.set	section_count, (. - section_table) / 40
+
+		.align	12
+__efi_start:
+#endif
+		.endm
diff --git a/arch/arm/boot/compressed/fdt.c b/arch/arm/boot/compressed/fdt.c
new file mode 100644
index 000000000000..f8ea7a201ab1
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt.c"
diff --git a/arch/arm/boot/compressed/fdt_check_mem_start.c b/arch/arm/boot/compressed/fdt_check_mem_start.c
new file mode 100644
index 000000000000..aa856567fd33
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_check_mem_start.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/kernel.h>
+#include <linux/libfdt.h>
+#include <linux/sizes.h>
+#include "misc.h"
+
+static const void *get_prop(const void *fdt, const char *node_path,
+			    const char *property, int minlen)
+{
+	const void *prop;
+	int offset, len;
+
+	offset = fdt_path_offset(fdt, node_path);
+	if (offset < 0)
+		return NULL;
+
+	prop = fdt_getprop(fdt, offset, property, &len);
+	if (!prop || len < minlen)
+		return NULL;
+
+	return prop;
+}
+
+static uint32_t get_cells(const void *fdt, const char *name)
+{
+	const fdt32_t *prop = get_prop(fdt, "/", name, sizeof(fdt32_t));
+
+	if (!prop) {
+		/* default */
+		return 1;
+	}
+
+	return fdt32_ld(prop);
+}
+
+static uint64_t get_val(const fdt32_t *cells, uint32_t ncells)
+{
+	uint64_t r;
+
+	r = fdt32_ld(cells);
+	if (ncells > 1)
+		r = (r << 32) | fdt32_ld(cells + 1);
+
+	return r;
+}
+
+/*
+ * Check the start of physical memory
+ *
+ * Traditionally, the start address of physical memory is obtained by masking
+ * the program counter.  However, this does require that this address is a
+ * multiple of 128 MiB, precluding booting Linux on platforms where this
+ * requirement is not fulfilled.
+ * Hence validate the calculated address against the memory information in the
+ * DTB, and, if out-of-range, replace it by the real start address.
+ * To preserve backwards compatibility (systems reserving a block of memory
+ * at the start of physical memory, kdump, ...), the traditional method is
+ * used if it yields a valid address, unless the "linux,usable-memory-range"
+ * property is present.
+ *
+ * Return value: start address of physical memory to use
+ */
+uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
+{
+	uint32_t addr_cells, size_cells, usable_base, base;
+	uint32_t fdt_mem_start = 0xffffffff;
+	const fdt32_t *usable, *reg, *endp;
+	uint64_t size, usable_end, end;
+	const char *type;
+	int offset, len;
+
+	if (!fdt)
+		return mem_start;
+
+	if (fdt_magic(fdt) != FDT_MAGIC)
+		return mem_start;
+
+	/* There may be multiple cells on LPAE platforms */
+	addr_cells = get_cells(fdt, "#address-cells");
+	size_cells = get_cells(fdt, "#size-cells");
+	if (addr_cells > 2 || size_cells > 2)
+		return mem_start;
+
+	/*
+	 * Usable memory in case of a crash dump kernel
+	 * This property describes a limitation: memory within this range is
+	 * only valid when also described through another mechanism
+	 */
+	usable = get_prop(fdt, "/chosen", "linux,usable-memory-range",
+			  (addr_cells + size_cells) * sizeof(fdt32_t));
+	if (usable) {
+		size = get_val(usable + addr_cells, size_cells);
+		if (!size)
+			return mem_start;
+
+		if (addr_cells > 1 && fdt32_ld(usable)) {
+			/* Outside 32-bit address space */
+			return mem_start;
+		}
+
+		usable_base = fdt32_ld(usable + addr_cells - 1);
+		usable_end = usable_base + size;
+	}
+
+	/* Walk all memory nodes and regions */
+	for (offset = fdt_next_node(fdt, -1, NULL); offset >= 0;
+	     offset = fdt_next_node(fdt, offset, NULL)) {
+		type = fdt_getprop(fdt, offset, "device_type", NULL);
+		if (!type || strcmp(type, "memory"))
+			continue;
+
+		reg = fdt_getprop(fdt, offset, "linux,usable-memory", &len);
+		if (!reg)
+			reg = fdt_getprop(fdt, offset, "reg", &len);
+		if (!reg)
+			continue;
+
+		for (endp = reg + (len / sizeof(fdt32_t));
+		     endp - reg >= addr_cells + size_cells;
+		     reg += addr_cells + size_cells) {
+			size = get_val(reg + addr_cells, size_cells);
+			if (!size)
+				continue;
+
+			if (addr_cells > 1 && fdt32_ld(reg)) {
+				/* Outside 32-bit address space, skipping */
+				continue;
+			}
+
+			base = fdt32_ld(reg + addr_cells - 1);
+			end = base + size;
+			if (usable) {
+				/*
+				 * Clip to usable range, which takes precedence
+				 * over mem_start
+				 */
+				if (base < usable_base)
+					base = usable_base;
+
+				if (end > usable_end)
+					end = usable_end;
+
+				if (end <= base)
+					continue;
+			} else if (mem_start >= base && mem_start < end) {
+				/* Calculated address is valid, use it */
+				return mem_start;
+			}
+
+			if (base < fdt_mem_start)
+				fdt_mem_start = base;
+		}
+	}
+
+	if (fdt_mem_start == 0xffffffff) {
+		/* No usable memory found, falling back to default */
+		return mem_start;
+	}
+
+	/*
+	 * The calculated address is not usable, or was overridden by the
+	 * "linux,usable-memory-range" property.
+	 * Use the lowest usable physical memory address from the DTB instead,
+	 * and make sure this is a multiple of 2 MiB for phys/virt patching.
+	 */
+	return round_up(fdt_mem_start, SZ_2M);
+}
diff --git a/arch/arm/boot/compressed/fdt_ro.c b/arch/arm/boot/compressed/fdt_ro.c
new file mode 100644
index 000000000000..93970a4ad5ae
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_ro.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_ro.c"
diff --git a/arch/arm/boot/compressed/fdt_rw.c b/arch/arm/boot/compressed/fdt_rw.c
new file mode 100644
index 000000000000..f7c6b8b7e01c
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_rw.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_rw.c"
diff --git a/arch/arm/boot/compressed/fdt_wip.c b/arch/arm/boot/compressed/fdt_wip.c
new file mode 100644
index 000000000000..048d2c7a088d
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_wip.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_wip.c"
diff --git a/arch/arm/boot/compressed/font.c b/arch/arm/boot/compressed/font.c
new file mode 100644
index 000000000000..46a677649db4
--- /dev/null
+++ b/arch/arm/boot/compressed/font.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fonts/font_acorn_8x8.c"
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 3115e313d9f6..23eae1a65064 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /* 
  * linux/arch/arm/boot/compressed/head-sa1100.S
  * 
@@ -19,10 +20,6 @@ __SA1100_start:
 #ifdef CONFIG_SA1100_COLLIE
 		mov	r7, #MACH_TYPE_COLLIE
 #endif
-#ifdef CONFIG_SA1100_SIMPAD
-		@ UNTIL we've something like an open bootldr
-		mov	r7, #MACH_TYPE_SIMPAD	@should be 87
-#endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		ands	r0, r0, #0x0d
 		beq	99f
diff --git a/arch/arm/boot/compressed/head-sharpsl.S b/arch/arm/boot/compressed/head-sharpsl.S
index eb0084ea1ec4..992e784500fa 100644
--- a/arch/arm/boot/compressed/head-sharpsl.S
+++ b/arch/arm/boot/compressed/head-sharpsl.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * linux/arch/arm/boot/compressed/head-sharpsl.S
  *
diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S
deleted file mode 100644
index e7f80928949c..000000000000
--- a/arch/arm/boot/compressed/head-shmobile.S
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * The head-file for SH-Mobile ARM platforms
- *
- * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Simon Horman <horms@verge.net.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifdef CONFIG_ZBOOT_ROM
-
-	.section	".start", "ax"
-
-	/* load board-specific initialization code */
-#include <mach/zboot.h>
-
-#if defined(CONFIG_ZBOOT_ROM_MMCIF) || defined(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI)
-	/* Load image from MMC/SD */
-	adr	sp, __tmp_stack + 256
-	ldr	r0, __image_start
-	ldr	r1, __image_end
-	subs	r1, r1, r0
-	ldr	r0, __load_base
-	bl	mmc_loader
-
-	/* Jump to loaded code */
-	ldr	r0, __loaded
-	ldr	r1, __image_start
-	sub	r0, r0, r1
-	ldr	r1, __load_base
-	add	pc, r0, r1
-
-__image_start:
-	.long	_start
-__image_end:
-	.long	_got_end
-__load_base:
-	.long	MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM
-__loaded:
-	.long	__continue
-	.align
-__tmp_stack:
-	.space	256
-__continue:
-#endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */
-
-	adr	r0, dtb_info
-	ldmia	r0, {r1, r3, r4, r5, r7}
-
-	sub	r0, r0, r1		@ calculate the delta offset
-	add	r5, r5, r0		@ _edata
-
-	ldr	lr, [r5, #0]		@ check if valid DTB is present
-	cmp	lr, r3
-	bne	0f
-
-	add	r9, r7, #31		@ rounded up to a multiple
-	bic	r9, r9, #31		@ ... of 32 bytes
-
-	add	r6, r9, r5		@ copy from _edata
-	add	r9, r9, r4		@ to MEMORY_START
-
-1:	ldmdb	r6!, {r0 - r3, r10 - r12, lr}
-	cmp	r6, r5
-	stmdb	r9!, {r0 - r3, r10 - r12, lr}
-	bhi	1b
-
-	/* Success: Zero board ID, pointer to start of memory for atag/dtb */
-	mov	r7, #0
-	mov	r8, r4
-	b	2f
-
-	.align	2
-dtb_info:
-	.word	dtb_info
-#ifndef __ARMEB__
-	.word	0xedfe0dd0		@ sig is 0xd00dfeed big endian
-#else
-	.word	0xd00dfeed
-#endif
-	.word	MEMORY_START
-	.word	_edata
-	.word	0x4000			@ maximum DTB size
-0:
-	/* Failure: Zero board ID, NULL atag/dtb */
-	mov 	r7, #0
-	mov	r8, #0			@ pass null pointer as atag
-2 :
-
-#endif /* CONFIG_ZBOOT_ROM */
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index 6ab0599c02dd..20fa44d59f82 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * linux/arch/arm/boot/compressed/head-xscale.S
  *
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 68be9017593d..9f406e9c0ea6 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -1,17 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/boot/compressed/head.S
  *
  *  Copyright (C) 1996-2002 Russell King
  *  Copyright (C) 2004 Hyok S. Choi (MPU support)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/v7m.h>
+
+#include "efi-header.S"
+
+#ifdef __ARMEB__
+#define OF_DT_MAGIC 0xd00dfeed
+#else
+#define OF_DT_MAGIC 0xedfe0dd0
+#endif
+
+ AR_CLASS(	.arch	armv7-a	)
+ M_CLASS(	.arch	armv7-m	)
 
-	.arch	armv7-a
 /*
  * Debugging stuff
  *
@@ -24,21 +32,21 @@
 #if defined(CONFIG_DEBUG_ICEDCC)
 
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
-		.macro	writeb, ch, rb
+		.macro	writeb, ch, rb, tmp
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
 #elif defined(CONFIG_CPU_XSCALE)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
-		.macro	writeb, ch, rb
+		.macro	writeb, ch, rb, tmp
 		mcr	p14, 0, \ch, c8, c0, 0
 		.endm
 #else
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
-		.macro	writeb, ch, rb
+		.macro	writeb, ch, rb, tmp
 		mcr	p14, 0, \ch, c1, c0, 0
 		.endm
 #endif
@@ -47,22 +55,23 @@
 
 #include CONFIG_DEBUG_LL_INCLUDE
 
-		.macro	writeb,	ch, rb
+		.macro	writeb,	ch, rb, tmp
+#ifdef CONFIG_DEBUG_UART_FLOW_CONTROL
+		waituartcts \tmp, \rb
+#endif
+		waituarttxrdy \tmp, \rb
 		senduart \ch, \rb
+		busyuart \tmp, \rb
 		.endm
 
 #if defined(CONFIG_ARCH_SA1100)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		mov	\rb, #0x80000000	@ physical base address
-#ifdef CONFIG_DEBUG_LL_SER3
-		add	\rb, \rb, #0x00050000	@ Ser3
-#else
 		add	\rb, \rb, #0x00010000	@ Ser1
-#endif
 		.endm
 #else
-		.macro	loadsp,	rb, tmp
-		addruart \rb, \tmp
+		.macro	loadsp,	rb, tmp1, tmp2
+		addruart \rb, \tmp1, \tmp2
 		.endm
 #endif
 #endif
@@ -79,67 +88,148 @@
 		bl	phex
 		.endm
 
-		.macro	debug_reloc_start
+		/*
+		 * Debug kernel copy by printing the memory addresses involved
+		 */
+		.macro dbgkc, begin, end, cbegin, cend
 #ifdef DEBUG
-		kputc	#'\n'
-		kphex	r6, 8		/* processor id */
-		kputc	#':'
-		kphex	r7, 8		/* architecture id */
-#ifdef CONFIG_CPU_CP15
-		kputc	#':'
-		mrc	p15, 0, r0, c1, c0
-		kphex	r0, 8		/* control reg */
-#endif
-		kputc	#'\n'
-		kphex	r5, 8		/* decompressed kernel start */
+		kputc   #'C'
+		kputc   #':'
+		kputc   #'0'
+		kputc   #'x'
+		kphex   \begin, 8	/* Start of compressed kernel */
+		kputc	#'-'
+		kputc	#'0'
+		kputc	#'x'
+		kphex	\end, 8		/* End of compressed kernel */
 		kputc	#'-'
-		kphex	r9, 8		/* decompressed kernel end  */
 		kputc	#'>'
-		kphex	r4, 8		/* kernel execution address */
+		kputc   #'0'
+		kputc   #'x'
+		kphex   \cbegin, 8	/* Start of kernel copy */
+		kputc	#'-'
+		kputc	#'0'
+		kputc	#'x'
+		kphex	\cend, 8	/* End of kernel copy */
 		kputc	#'\n'
 #endif
 		.endm
 
-		.macro	debug_reloc_end
+		/*
+		 * Debug print of the final appended DTB location
+		 */
+		.macro dbgadtb, begin, size
 #ifdef DEBUG
-		kphex	r5, 8		/* end of kernel */
+		kputc   #'D'
+		kputc   #'T'
+		kputc   #'B'
+		kputc   #':'
+		kputc   #'0'
+		kputc   #'x'
+		kphex   \begin, 8	/* Start of appended DTB */
+		kputc	#' '
+		kputc	#'('
+		kputc	#'0'
+		kputc	#'x'
+		kphex	\size, 8	/* Size of appended DTB */
+		kputc	#')'
 		kputc	#'\n'
-		mov	r0, r4
-		bl	memdump		/* dump 256 bytes at start of kernel */
 #endif
 		.endm
 
-		.section ".start", #alloc, #execinstr
+		.macro	enable_cp15_barriers, reg
+		mrc	p15, 0, \reg, c1, c0, 0	@ read SCTLR
+		tst	\reg, #(1 << 5)		@ CP15BEN bit set?
+		bne	.L_\@
+		orr	\reg, \reg, #(1 << 5)	@ CP15 barrier instructions
+		mcr	p15, 0, \reg, c1, c0, 0	@ write SCTLR
+ ARM(		.inst   0xf57ff06f		@ v7+ isb	)
+ THUMB(		isb						)
+.L_\@:
+		.endm
+
+		/*
+		 * The kernel build system appends the size of the
+		 * decompressed kernel at the end of the compressed data
+		 * in little-endian form.
+		 */
+		.macro	get_inflated_image_size, res:req, tmp1:req, tmp2:req
+		adr	\res, .Linflated_image_size_offset
+		ldr	\tmp1, [\res]
+		add	\tmp1, \tmp1, \res	@ address of inflated image size
+
+		ldrb	\res, [\tmp1]		@ get_unaligned_le32
+		ldrb	\tmp2, [\tmp1, #1]
+		orr	\res, \res, \tmp2, lsl #8
+		ldrb	\tmp2, [\tmp1, #2]
+		ldrb	\tmp1, [\tmp1, #3]
+		orr	\res, \res, \tmp2, lsl #16
+		orr	\res, \res, \tmp1, lsl #24
+		.endm
+
+		.macro	be32tocpu, val, tmp
+#ifndef __ARMEB__
+		/* convert to little endian */
+		rev_l	\val, \tmp
+#endif
+		.endm
+
+		.section ".start", "ax"
 /*
  * sort out different calling conventions
  */
 		.align
-		.arm				@ Always enter in ARM state
+		/*
+		 * Always enter in ARM state for CPUs that support the ARM ISA.
+		 * As of today (2014) that's exactly the members of the A and R
+		 * classes.
+		 */
+ AR_CLASS(	.arm	)
 start:
 		.type	start,#function
-		.rept	7
-		mov	r0, r0
+		/*
+		 * These 7 nops along with the 1 nop immediately below for
+		 * !THUMB2 form 8 nops that make the compressed kernel bootable
+		 * on legacy ARM systems that were assuming the kernel in a.out
+		 * binary format. The boot loaders on these systems would
+		 * jump 32 bytes into the image to skip the a.out header.
+		 * with these 8 nops filling exactly 32 bytes, things still
+		 * work as expected on these legacy systems. Thumb2 mode keeps
+		 * 7 of the nops as it turns out that some boot loaders
+		 * were patching the initial instructions of the kernel, i.e
+		 * had started to exploit this "patch area".
+		 */
+		__initial_nops
+		.rept	5
+		__nop
 		.endr
-   ARM(		mov	r0, r0		)
-   ARM(		b	1f		)
- THUMB(		adr	r12, BSYM(1f)	)
- THUMB(		bx	r12		)
+#ifndef CONFIG_THUMB2_KERNEL
+		__nop
+#else
+ AR_CLASS(	sub	pc, pc, #3	)	@ A/R: switch to Thumb2 mode
+  M_CLASS(	nop.w			)	@ M: already in Thumb2 mode
+		.thumb
+#endif
+		W(b)	1f
 
 		.word	_magic_sig	@ Magic numbers to help the loader
 		.word	_magic_start	@ absolute load/run zImage address
 		.word	_magic_end	@ zImage end address
 		.word	0x04030201	@ endianness flag
+		.word	0x45454545	@ another magic number to indicate
+		.word	_magic_table	@ additional data table
 
- THUMB(		.thumb			)
+		__EFI_HEADER
 1:
- ARM_BE8(	setend	be )			@ go BE8 if compiled for BE8
-		mrs	r9, cpsr
+ ARM_BE8(	setend	be		)	@ go BE8 if compiled for BE8
+ AR_CLASS(	mrs	r9, cpsr	)
 #ifdef CONFIG_ARM_VIRT_EXT
 		bl	__hyp_stub_install	@ get into SVC mode, reversibly
 #endif
 		mov	r7, r1			@ save architecture ID
 		mov	r8, r2			@ save atags pointer
 
+#ifndef CONFIG_CPU_V7M
 		/*
 		 * Booting from Angel - need to enter SVC mode and disable
 		 * FIQs/IRQs (numeric definitions from angel arm.h source).
@@ -155,6 +245,7 @@ not_angel:
 		safe_svcmode_maskall r0
 		msr	spsr_cxsf, r9		@ Save the CPU boot mode in
 						@ SPSR
+#endif
 		/*
 		 * Note that some cache flushing and other stuff may
 		 * be needed here - is there an Angel SWI call for this?
@@ -168,57 +259,86 @@ not_angel:
 		.text
 
 #ifdef CONFIG_AUTO_ZRELADDR
-		@ determine final kernel image address
-		mov	r4, pc
-		and	r4, r4, #0xf8000000
-		add	r4, r4, #TEXT_OFFSET
+		/*
+		 * Find the start of physical memory.  As we are executing
+		 * without the MMU on, we are in the physical address space.
+		 * We just need to get rid of any offset by aligning the
+		 * address.
+		 *
+		 * This alignment is a balance between the requirements of
+		 * different platforms - we have chosen 128MB to allow
+		 * platforms which align the start of their physical memory
+		 * to 128MB to use this feature, while allowing the zImage
+		 * to be placed within the first 128MB of memory on other
+		 * platforms.  Increasing the alignment means we place
+		 * stricter alignment requirements on the start of physical
+		 * memory, but relaxing it means that we break people who
+		 * are already placing their zImage in (eg) the top 64MB
+		 * of this range.
+		 */
+		mov	r0, pc
+		and	r0, r0, #0xf8000000
+#ifdef CONFIG_USE_OF
+		adr	r1, LC1
+#ifdef CONFIG_ARM_APPENDED_DTB
+		/*
+		 * Look for an appended DTB.  If found, we cannot use it to
+		 * validate the calculated start of physical memory, as its
+		 * memory nodes may need to be augmented by ATAGS stored at
+		 * an offset from the same start of physical memory.
+		 */
+		ldr	r2, [r1, #4]	@ get &_edata
+		add	r2, r2, r1	@ relocate it
+		ldr	r2, [r2]	@ get DTB signature
+		ldr	r3, =OF_DT_MAGIC
+		cmp	r2, r3		@ do we have a DTB there?
+		beq	1f		@ if yes, skip validation
+#endif /* CONFIG_ARM_APPENDED_DTB */
+
+		/*
+		 * Make sure we have some stack before calling C code.
+		 * No GOT fixup has occurred yet, but none of the code we're
+		 * about to call uses any global variables.
+		 */
+		ldr	sp, [r1]	@ get stack location
+		add	sp, sp, r1	@ apply relocation
+
+		/* Validate calculated start against passed DTB */
+		mov	r1, r8
+		bl	fdt_check_mem_start
+1:
+#endif /* CONFIG_USE_OF */
+		/* Determine final kernel image address. */
+		add	r4, r0, #TEXT_OFFSET
 #else
 		ldr	r4, =zreladdr
 #endif
 
 		/*
 		 * Set up a page table only if it won't overwrite ourself.
-		 * That means r4 < pc && r4 - 16k page directory > &_end.
+		 * That means r4 < pc || r4 - 16k page directory > &_end.
 		 * Given that r4 > &_end is most unfrequent, we add a rough
 		 * additional 1MB of room for a possible appended DTB.
 		 */
 		mov	r0, pc
 		cmp	r0, r4
-		ldrcc	r0, LC0+32
+		ldrcc	r0, .Lheadroom
 		addcc	r0, r0, pc
 		cmpcc	r4, r0
 		orrcc	r4, r4, #1		@ remember we skipped cache_on
 		blcs	cache_on
 
-restart:	adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r6, r10, r11, r12}
-		ldr	sp, [r0, #28]
+restart:	adr	r0, LC1
+		ldr	sp, [r0]
+		ldr	r6, [r0, #4]
+		add	sp, sp, r0
+		add	r6, r6, r0
 
-		/*
-		 * We might be running at a different address.  We need
-		 * to fix up various pointers.
-		 */
-		sub	r0, r0, r1		@ calculate the delta offset
-		add	r6, r6, r0		@ _edata
-		add	r10, r10, r0		@ inflated kernel size location
-
-		/*
-		 * The kernel build system appends the size of the
-		 * decompressed kernel at the end of the compressed data
-		 * in little-endian form.
-		 */
-		ldrb	r9, [r10, #0]
-		ldrb	lr, [r10, #1]
-		orr	r9, r9, lr, lsl #8
-		ldrb	lr, [r10, #2]
-		ldrb	r10, [r10, #3]
-		orr	r9, r9, lr, lsl #16
-		orr	r9, r9, r10, lsl #24
+		get_inflated_image_size	r9, r10, lr
 
 #ifndef CONFIG_ZBOOT_ROM
 		/* malloc space is above the relocated stack (64k max) */
-		add	sp, sp, r0
-		add	r10, sp, #0x10000
+		add	r10, sp, #MALLOC_SIZE
 #else
 		/*
 		 * With ZBOOT_ROM the bss/stack is non relocatable,
@@ -231,9 +351,6 @@ restart:	adr	r0, LC0
 		mov	r5, #0			@ init dtb size to 0
 #ifdef CONFIG_ARM_APPENDED_DTB
 /*
- *   r0  = delta
- *   r2  = BSS start
- *   r3  = BSS end
  *   r4  = final kernel address (possibly with LSB set)
  *   r5  = appended dtb size (still unknown)
  *   r6  = _edata
@@ -241,8 +358,6 @@ restart:	adr	r0, LC0
  *   r8  = atags/device tree pointer
  *   r9  = size of decompressed image
  *   r10 = end of this image, including  bss/stack/malloc space if non XIP
- *   r11 = GOT start
- *   r12 = GOT end
  *   sp  = stack pointer
  *
  * if there are device trees (dtb) appended to zImage, advance r10 so that the
@@ -250,11 +365,7 @@ restart:	adr	r0, LC0
  */
 
 		ldr	lr, [r6, #0]
-#ifndef __ARMEB__
-		ldr	r1, =0xedfe0dd0		@ sig is 0xd00dfeed big endian
-#else
-		ldr	r1, =0xd00dfeed
-#endif
+		ldr	r1, =OF_DT_MAGIC
 		cmp	lr, r1
 		bne	dtb_check_done		@ not found
 
@@ -263,16 +374,31 @@ restart:	adr	r0, LC0
 		 * OK... Let's do some funky business here.
 		 * If we do have a DTB appended to zImage, and we do have
 		 * an ATAG list around, we want the later to be translated
-		 * and folded into the former here.  To be on the safe side,
-		 * let's temporarily move  the stack away into the malloc
-		 * area.  No GOT fixup has occurred yet, but none of the
-		 * code we're about to call uses any global variable.
+		 * and folded into the former here. No GOT fixup has occurred
+		 * yet, but none of the code we're about to call uses any
+		 * global variable.
 		*/
-		add	sp, sp, #0x10000
-		stmfd	sp!, {r0-r3, ip, lr}
+
+		/* Get the initial DTB size */
+		ldr	r5, [r6, #4]
+		be32tocpu r5, r1
+		dbgadtb	r6, r5
+		/* 50% DTB growth should be good enough */
+		add	r5, r5, r5, lsr #1
+		/* preserve 64-bit alignment */
+		add	r5, r5, #7
+		bic	r5, r5, #7
+		/* clamp to 32KB min and 1MB max */
+		cmp	r5, #(1 << 15)
+		movlo	r5, #(1 << 15)
+		cmp	r5, #(1 << 20)
+		movhi	r5, #(1 << 20)
+		/* temporarily relocate the stack past the DTB work space */
+		add	sp, sp, r5
+
 		mov	r0, r8
 		mov	r1, r6
-		sub	r2, sp, r6
+		mov	r2, r5
 		bl	atags_to_fdt
 
 		/*
@@ -285,11 +411,10 @@ restart:	adr	r0, LC0
 		bic	r0, r0, #1
 		add	r0, r0, #0x100
 		mov	r1, r6
-		sub	r2, sp, r6
+		mov	r2, r5
 		bleq	atags_to_fdt
 
-		ldmfd	sp!, {r0-r3, ip, lr}
-		sub	sp, sp, #0x10000
+		sub	sp, sp, r5
 #endif
 
 		mov	r8, r6			@ use the appended device tree
@@ -306,15 +431,9 @@ restart:	adr	r0, LC0
 		subs	r1, r5, r1
 		addhi	r9, r9, r1
 
-		/* Get the dtb's size */
+		/* Get the current DTB size */
 		ldr	r5, [r6, #4]
-#ifndef __ARMEB__
-		/* convert r5 (dtb size) to little endian */
-		eor	r1, r5, r5, ror #16
-		bic	r1, r1, #0x00ff0000
-		mov	r5, r5, ror #8
-		eor	r5, r5, r1, lsr #8
-#endif
+		be32tocpu r5, r1
 
 		/* preserve 64-bit alignment */
 		add	r5, r5, #7
@@ -371,7 +490,12 @@ dtb_check_done:
 		cmp	r0, #HYP_MODE
 		bne	1f
 
-		bl	__hyp_get_vectors
+		/*
+		 * Compute the address of the hyp vectors after relocation.
+		 * Call __hyp_set_vectors with the new address so that we
+		 * can HVC again after the copy.
+		 */
+		adr_l	r0, __hyp_stub_vectors
 		sub	r0, r0, r5
 		add	r0, r0, r10
 		bl	__hyp_set_vectors
@@ -384,6 +508,20 @@ dtb_check_done:
 		add	r6, r9, r5
 		add	r9, r9, r10
 
+#ifdef DEBUG
+		sub     r10, r6, r5
+		sub     r10, r9, r10
+		/*
+		 * We are about to copy the kernel to a new memory area.
+		 * The boundaries of the new memory area can be found in
+		 * r10 and r9, whilst r5 and r6 contain the boundaries
+		 * of the memory we are going to copy.
+		 * Calling dbgkc will help with the printing of this
+		 * information.
+		 */
+		dbgkc	r5, r6, r10, r9
+#endif
+
 1:		ldmdb	r6!, {r0 - r3, r10 - r12, lr}
 		cmp	r6, r5
 		stmdb	r9!, {r0 - r3, r10 - r12, lr}
@@ -392,18 +530,19 @@ dtb_check_done:
 		/* Preserve offset to relocated code. */
 		sub	r6, r9, r6
 
-#ifndef CONFIG_ZBOOT_ROM
-		/* cache_clean_flush may use the stack, so relocate it */
-		add	sp, sp, r6
-#endif
-
+		mov	r0, r9			@ start of relocated zImage
+		add	r1, sp, r6		@ end of relocated zImage
 		bl	cache_clean_flush
 
-		adr	r0, BSYM(restart)
+		badr	r0, restart
 		add	r0, r0, r6
 		mov	pc, r0
 
 wont_overwrite:
+		adr	r0, LC0
+		ldmia	r0, {r1, r2, r3, r11, r12}
+		sub	r0, r0, r1		@ calculate the delta offset
+
 /*
  * If delta is zero, we are running at the address we were linked at.
  *   r0  = delta
@@ -490,13 +629,16 @@ not_relocated:	mov	r0, #0
  */
 		mov	r0, r4
 		mov	r1, sp			@ malloc space above stack
-		add	r2, sp, #0x10000	@ 64k max
+		add	r2, sp, #MALLOC_SIZE	@ 64k max
 		mov	r3, r7
 		bl	decompress_kernel
+
+		get_inflated_image_size	r1, r2, r3
+
+		mov	r0, r4			@ start of inflated image
+		add	r1, r1, r0		@ end of inflated image
 		bl	cache_clean_flush
 		bl	cache_off
-		mov	r1, r7			@ restore architecture number
-		mov	r2, r8			@ restore atags pointer
 
 #ifdef CONFIG_ARM_VIRT_EXT
 		mrs	r0, spsr		@ Get saved CPU boot mode
@@ -504,17 +646,11 @@ not_relocated:	mov	r0, #0
 		cmp	r0, #HYP_MODE		@ if not booted in HYP mode...
 		bne	__enter_kernel		@ boot kernel directly
 
-		adr	r12, .L__hyp_reentry_vectors_offset
-		ldr	r0, [r12]
-		add	r0, r0, r12
-
+		adr_l	r0, __hyp_reentry_vectors
 		bl	__hyp_set_vectors
 		__HVC(0)			@ otherwise bounce to hyp mode
 
 		b	.			@ should never be reached
-
-		.align	2
-.L__hyp_reentry_vectors_offset:	.long	__hyp_reentry_vectors - .
 #else
 		b	__enter_kernel
 #endif
@@ -524,14 +660,21 @@ not_relocated:	mov	r0, #0
 LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
 		.word	_end			@ r3
-		.word	_edata			@ r6
-		.word	input_data_end - 4	@ r10 (inflated size location)
 		.word	_got_start		@ r11
 		.word	_got_end		@ ip
-		.word	.L_user_stack_end	@ sp
-		.word	_end - restart + 16384 + 1024*1024
 		.size	LC0, . - LC0
 
+		.type	LC1, #object
+LC1:		.word	.L_user_stack_end - LC1	@ sp
+		.word	_edata - LC1		@ r6
+		.size	LC1, . - LC1
+
+.Lheadroom:
+		.word	_end - restart + 16384 + 1024*1024
+
+.Linflated_image_size_offset:
+		.long	(input_data_end - 4) - .
+
 #ifdef CONFIG_ARCH_RPC
 		.globl	params
 params:		ldr	r0, =0x10000100		@ params_phys for RPC
@@ -541,6 +684,24 @@ params:		ldr	r0, =0x10000100		@ params_phys for RPC
 #endif
 
 /*
+ * dcache_line_size - get the minimum D-cache line size from the CTR register
+ * on ARMv7.
+ */
+		.macro	dcache_line_size, reg, tmp
+#ifdef CONFIG_CPU_V7M
+		movw	\tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+		movt	\tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+		ldr	\tmp, [\tmp]
+#else
+		mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
+#endif
+		lsr	\tmp, \tmp, #16
+		and	\tmp, \tmp, #0xf		@ cache line size encoding
+		mov	\reg, #4			@ bytes per word
+		mov	\reg, \reg, lsl \tmp		@ actual cache line size
+		.endm
+
+/*
  * Turn on the cache.  We need to setup some page tables so that we
  * can have both the I and D caches on.
  *
@@ -704,6 +865,7 @@ __armv4_mmu_cache_on:
 		mov	pc, r12
 
 __armv7_mmu_cache_on:
+		enable_cp15_barriers	r11
 		mov	r12, lr
 #ifdef CONFIG_MMU
 		mrc	p15, 0, r11, c0, c1, 4	@ read ID_MMFR0
@@ -728,7 +890,7 @@ __armv7_mmu_cache_on:
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client
 		bic     r6, r6, #1 << 31        @ 32-bit translation system
-		bic     r6, r6, #3 << 0         @ use only ttbr0
+		bic     r6, r6, #(7 << 0) | (1 << 4)	@ use only ttbr0
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
 		mcrne   p15, 0, r6, c2, c0, 2   @ load ttb control
@@ -789,6 +951,16 @@ __common_mmu_cache_on:
 call_cache_fn:	adr	r12, proc_types
 #ifdef CONFIG_CPU_CP15
 		mrc	p15, 0, r9, c0, c0	@ get processor ID
+#elif defined(CONFIG_CPU_V7M)
+		/*
+		 * On v7-M the processor id is located in the V7M_SCB_CPUID
+		 * register, but as cache handling is IMPLEMENTATION DEFINED on
+		 * v7-M (if existant at all) we just return early here.
+		 * If V7M_SCB_CPUID were used the cpu ID functions (i.e.
+		 * __armv7_mmu_cache_{on,off,flush}) would be selected which
+		 * use cp15 registers that are not implemented on v7-M.
+		 */
+		bx	lr
 #else
 		ldr	r9, =CONFIG_PROCESSOR_ID
 #endif
@@ -1016,13 +1188,11 @@ __armv4_mmu_cache_off:
 __armv7_mmu_cache_off:
 		mrc	p15, 0, r0, c1, c0
 #ifdef CONFIG_MMU
-		bic	r0, r0, #0x000d
+		bic	r0, r0, #0x0005
 #else
-		bic	r0, r0, #0x000c
+		bic	r0, r0, #0x0004
 #endif
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
-		mov	r12, lr
-		bl	__armv7_mmu_cache_flush
 		mov	r0, #0
 #ifdef CONFIG_MMU
 		mcr	p15, 0, r0, c8, c7, 0	@ invalidate whole TLB
@@ -1030,11 +1200,14 @@ __armv7_mmu_cache_off:
 		mcr	p15, 0, r0, c7, c5, 6	@ invalidate BTC
 		mcr	p15, 0, r0, c7, c10, 4	@ DSB
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
-		mov	pc, r12
+		mov	pc, lr
 
 /*
  * Clean and flush the cache to maintain consistency.
  *
+ * On entry,
+ *  r0 = start address
+ *  r1 = end address (exclusive)
  * On exit,
  *  r1, r2, r3, r9, r10, r11, r12 corrupted
  * This routine must preserve:
@@ -1043,6 +1216,7 @@ __armv7_mmu_cache_off:
 		.align	5
 cache_clean_flush:
 		mov	r3, #16
+		mov	r11, r1
 		b	call_cache_fn
 
 __armv4_mpu_cache_flush:
@@ -1083,6 +1257,7 @@ __armv6_mmu_cache_flush:
 		mov	pc, lr
 
 __armv7_mmu_cache_flush:
+		enable_cp15_barriers	r10
 		tst	r4, #1
 		bne	iflush
 		mrc	p15, 0, r10, c0, c1, 5	@ read ID_MMFR1
@@ -1092,51 +1267,16 @@ __armv7_mmu_cache_flush:
 		mcr	p15, 0, r10, c7, c14, 0	@ clean+invalidate D
 		b	iflush
 hierarchical:
-		mcr	p15, 0, r10, c7, c10, 5	@ DMB
-		stmfd	sp!, {r0-r7, r9-r11}
-		mrc	p15, 1, r0, c0, c0, 1	@ read clidr
-		ands	r3, r0, #0x7000000	@ extract loc from clidr
-		mov	r3, r3, lsr #23		@ left align loc bit field
-		beq	finished		@ if loc is 0, then no need to clean
-		mov	r10, #0			@ start clean at cache level 0
-loop1:
-		add	r2, r10, r10, lsr #1	@ work out 3x current cache level
-		mov	r1, r0, lsr r2		@ extract cache type bits from clidr
-		and	r1, r1, #7		@ mask of the bits for current cache only
-		cmp	r1, #2			@ see what cache we have at this level
-		blt	skip			@ skip if no cache, or just i-cache
-		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
-		mcr	p15, 0, r10, c7, c5, 4	@ isb to sych the new cssr&csidr
-		mrc	p15, 1, r1, c0, c0, 0	@ read the new csidr
-		and	r2, r1, #7		@ extract the length of the cache lines
-		add	r2, r2, #4		@ add 4 (line length offset)
-		ldr	r4, =0x3ff
-		ands	r4, r4, r1, lsr #3	@ find maximum number on the way size
-		clz	r5, r4			@ find bit position of way size increment
-		ldr	r7, =0x7fff
-		ands	r7, r7, r1, lsr #13	@ extract max number of the index size
-loop2:
-		mov	r9, r4			@ create working copy of max way size
-loop3:
- ARM(		orr	r11, r10, r9, lsl r5	) @ factor way and cache number into r11
- ARM(		orr	r11, r11, r7, lsl r2	) @ factor index number into r11
- THUMB(		lsl	r6, r9, r5		)
- THUMB(		orr	r11, r10, r6		) @ factor way and cache number into r11
- THUMB(		lsl	r6, r7, r2		)
- THUMB(		orr	r11, r11, r6		) @ factor index number into r11
-		mcr	p15, 0, r11, c7, c14, 2	@ clean & invalidate by set/way
-		subs	r9, r9, #1		@ decrement the way
-		bge	loop3
-		subs	r7, r7, #1		@ decrement the index
-		bge	loop2
-skip:
-		add	r10, r10, #2		@ increment cache number
-		cmp	r3, r10
-		bgt	loop1
-finished:
-		ldmfd	sp!, {r0-r7, r9-r11}
-		mov	r10, #0			@ swith back to cache level 0
-		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
+		dcache_line_size r1, r2		@ r1 := dcache min line size
+		sub	r2, r1, #1		@ r2 := line size mask
+		bic	r0, r0, r2		@ round down start to line size
+		sub	r11, r11, #1		@ end address is exclusive
+		bic	r11, r11, r2		@ round down end to line size
+0:		cmp	r0, r11			@ finished?
+		bgt	iflush
+		mcr	p15, 0, r0, c7, c14, 1	@ Dcache clean/invalidate by VA
+		add	r0, r0, r1
+		b	0b
 iflush:
 		mcr	p15, 0, r10, c7, c10, 4	@ DSB
 		mcr	p15, 0, r10, c7, c5, 0	@ invalidate I+BTB
@@ -1147,7 +1287,7 @@ iflush:
 __armv5tej_mmu_cache_flush:
 		tst	r4, #1
 		movne	pc, lr
-1:		mrc	p15, 0, r15, c7, c14, 3	@ test,clean,invalidate D cache
+1:		mrc	p15, 0, APSR_nzcv, c7, c14, 3	@ test,clean,invalidate D cache
 		bne	1b
 		mcr	p15, 0, r0, c7, c5, 0	@ flush I cache
 		mcr	p15, 0, r0, c7, c10, 4	@ drain WB
@@ -1221,11 +1361,11 @@ phex:		adr	r3, phexbuf
 		b	1b
 
 @ puts corrupts {r0, r1, r2, r3}
-puts:		loadsp	r3, r1
+puts:		loadsp	r3, r2, r1
 1:		ldrb	r2, [r0], #1
 		teq	r2, #0
 		moveq	pc, lr
-2:		writeb	r2, r3
+2:		writeb	r2, r3, r1
 		mov	r1, #0x00020000
 3:		subs	r1, r1, #1
 		bne	3b
@@ -1238,8 +1378,8 @@ puts:		loadsp	r3, r1
 @ putc corrupts {r0, r1, r2, r3}
 putc:
 		mov	r2, r0
+		loadsp	r3, r1, r0
 		mov	r0, #0
-		loadsp	r3, r1
 		b	2b
 
 @ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr}
@@ -1279,7 +1419,11 @@ memdump:	mov	r12, r0
 __hyp_reentry_vectors:
 		W(b)	.			@ reset
 		W(b)	.			@ undef
+#ifdef CONFIG_EFI_STUB
+		W(b)	__enter_kernel_from_hyp	@ hvc from HYP
+#else
 		W(b)	.			@ svc
+#endif
 		W(b)	.			@ pabort
 		W(b)	.			@ dabort
 		W(b)	__enter_kernel		@ hyp
@@ -1289,11 +1433,98 @@ __hyp_reentry_vectors:
 
 __enter_kernel:
 		mov	r0, #0			@ must be 0
- ARM(		mov	pc, r4	)		@ call kernel
- THUMB(		bx	r4	)		@ entry point is always ARM
+		mov	r1, r7			@ restore architecture number
+		mov	r2, r8			@ restore atags pointer
+ ARM(		mov	pc, r4		)	@ call kernel
+ M_CLASS(	add	r4, r4, #1	)	@ enter in Thumb mode for M class
+ THUMB(		bx	r4		)	@ entry point is always ARM for A/R classes
 
 reloc_code_end:
 
+#ifdef CONFIG_EFI_STUB
+__enter_kernel_from_hyp:
+		mrc	p15, 4, r0, c1, c0, 0	@ read HSCTLR
+		bic	r0, r0, #0x5		@ disable MMU and caches
+		mcr	p15, 4, r0, c1, c0, 0	@ write HSCTLR
+		isb
+		b	__enter_kernel
+
+ENTRY(efi_enter_kernel)
+		mov	r4, r0			@ preserve image base
+		mov	r8, r1			@ preserve DT pointer
+
+		adr_l	r0, call_cache_fn
+		adr	r1, 0f			@ clean the region of code we
+		bl	cache_clean_flush	@ may run with the MMU off
+
+#ifdef CONFIG_ARM_VIRT_EXT
+		@
+		@ The EFI spec does not support booting on ARM in HYP mode,
+		@ since it mandates that the MMU and caches are on, with all
+		@ 32-bit addressable DRAM mapped 1:1 using short descriptors.
+		@
+		@ While the EDK2 reference implementation adheres to this,
+		@ U-Boot might decide to enter the EFI stub in HYP mode
+		@ anyway, with the MMU and caches either on or off.
+		@
+		mrs	r0, cpsr		@ get the current mode
+		msr	spsr_cxsf, r0		@ record boot mode
+		and	r0, r0, #MODE_MASK	@ are we running in HYP mode?
+		cmp	r0, #HYP_MODE
+		bne	.Lefi_svc
+
+		mrc	p15, 4, r1, c1, c0, 0	@ read HSCTLR
+		tst	r1, #0x1		@ MMU enabled at HYP?
+		beq	1f
+
+		@
+		@ When running in HYP mode with the caches on, we're better
+		@ off just carrying on using the cached 1:1 mapping that the
+		@ firmware provided. Set up the HYP vectors so HVC instructions
+		@ issued from HYP mode take us to the correct handler code. We
+		@ will disable the MMU before jumping to the kernel proper.
+		@
+ ARM(		bic	r1, r1, #(1 << 30)	) @ clear HSCTLR.TE
+ THUMB(		orr	r1, r1, #(1 << 30)	) @ set HSCTLR.TE
+		mcr	p15, 4, r1, c1, c0, 0
+		adr	r0, __hyp_reentry_vectors
+		mcr	p15, 4, r0, c12, c0, 0	@ set HYP vector base (HVBAR)
+		isb
+		b	.Lefi_hyp
+
+		@
+		@ When running in HYP mode with the caches off, we need to drop
+		@ into SVC mode now, and let the decompressor set up its cached
+		@ 1:1 mapping as usual.
+		@
+1:		mov	r9, r4			@ preserve image base
+		bl	__hyp_stub_install	@ install HYP stub vectors
+		safe_svcmode_maskall	r1	@ drop to SVC mode
+		msr	spsr_cxsf, r0		@ record boot mode
+		orr	r4, r9, #1		@ restore image base and set LSB
+		b	.Lefi_hyp
+.Lefi_svc:
+#endif
+		mrc	p15, 0, r0, c1, c0, 0	@ read SCTLR
+		tst	r0, #0x1		@ MMU enabled?
+		orreq	r4, r4, #1		@ set LSB if not
+
+.Lefi_hyp:
+		mov	r0, r8			@ DT start
+		add	r1, r8, r2		@ DT end
+		bl	cache_clean_flush
+
+		adr	r0, 0f			@ switch to our stack
+		ldr	sp, [r0]
+		add	sp, sp, r0
+
+		mov	r5, #0			@ appended DTB size
+		mov	r7, #0xFFFFFFFF		@ machine ID
+		b	wont_overwrite
+ENDPROC(efi_enter_kernel)
+0:		.long	.L_user_stack_end - .
+#endif
+
 		.align
 		.section ".stack", "aw", %nobits
 .L_user_stack:	.space	4096
diff --git a/arch/arm/boot/compressed/hyp-stub.S b/arch/arm/boot/compressed/hyp-stub.S
new file mode 100644
index 000000000000..a703eaa86f10
--- /dev/null
+++ b/arch/arm/boot/compressed/hyp-stub.S
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#include "../../kernel/hyp-stub.S"
diff --git a/arch/arm/boot/compressed/lib1funcs.S b/arch/arm/boot/compressed/lib1funcs.S
new file mode 100644
index 000000000000..815dec73ba4d
--- /dev/null
+++ b/arch/arm/boot/compressed/lib1funcs.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __aeabi_uidivmod */
+#include "../../lib/lib1funcs.S"
diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h
deleted file mode 100644
index 1f4e71876b00..000000000000
--- a/arch/arm/boot/compressed/libfdt_env.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ARM_LIBFDT_ENV_H
-#define _ARM_LIBFDT_ENV_H
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/byteorder.h>
-
-#define fdt16_to_cpu(x)		be16_to_cpu(x)
-#define cpu_to_fdt16(x)		cpu_to_be16(x)
-#define fdt32_to_cpu(x)		be32_to_cpu(x)
-#define cpu_to_fdt32(x)		cpu_to_be32(x)
-#define fdt64_to_cpu(x)		be64_to_cpu(x)
-#define cpu_to_fdt64(x)		cpu_to_be64(x)
-
-#endif
diff --git a/arch/arm/boot/compressed/ll_char_wr.S b/arch/arm/boot/compressed/ll_char_wr.S
index 8517c8606b4a..1ec8cb2898b1 100644
--- a/arch/arm/boot/compressed/ll_char_wr.S
+++ b/arch/arm/boot/compressed/ll_char_wr.S
@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/lib/ll_char_wr.S
  *
  *  Copyright (C) 1995, 1996 Russell King.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  *  Speedups & 1bpp code (C) 1996 Philip Blundell & Russell King.
  *
  *  10-04-96	RMK	Various cleanups & reduced register usage.
@@ -75,7 +72,7 @@ Lrow4bpplp:
 	tst	r1, #7				@ avoid using r7 directly after
 	str	r7, [r0, -r5]!
 	subne	r1, r1, #1
-	ldrneb	r7, [r6, r1]
+	ldrbne	r7, [r6, r1]
 	bne	Lrow4bpplp
 	ldmfd	sp!, {r4 - r7, pc}
 
@@ -103,7 +100,7 @@ Lrow8bpplp:
 	sub	r0, r0, r5			@ avoid ip
 	stmia	r0, {r4, ip}
 	subne	r1, r1, #1
-	ldrneb	r7, [r6, r1]
+	ldrbne	r7, [r6, r1]
 	bne	Lrow8bpplp
 	ldmfd	sp!, {r4 - r7, pc}
 
diff --git a/arch/arm/boot/compressed/misc-ep93xx.h b/arch/arm/boot/compressed/misc-ep93xx.h
new file mode 100644
index 000000000000..65b4121d1490
--- /dev/null
+++ b/arch/arm/boot/compressed/misc-ep93xx.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ */
+
+#include <asm/mach-types.h>
+
+static inline unsigned int __raw_readl(unsigned int ptr)
+{
+	return *((volatile unsigned int *)ptr);
+}
+
+static inline void __raw_writeb(unsigned char value, unsigned int ptr)
+{
+	*((volatile unsigned char *)ptr) = value;
+}
+
+static inline void __raw_writel(unsigned int value, unsigned int ptr)
+{
+	*((volatile unsigned int *)ptr) = value;
+}
+
+/*
+ * Some bootloaders don't turn off DMA from the ethernet MAC before
+ * jumping to linux, which means that we might end up with bits of RX
+ * status and packet data scribbled over the uncompressed kernel image.
+ * Work around this by resetting the ethernet MAC before we uncompress.
+ */
+#define PHYS_ETH_SELF_CTL		0x80010020
+#define ETH_SELF_CTL_RESET		0x00000001
+
+static inline void ep93xx_ethernet_reset(void)
+{
+	unsigned int v;
+
+	/* Reset the ethernet MAC.  */
+	v = __raw_readl(PHYS_ETH_SELF_CTL);
+	__raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
+
+	/* Wait for reset to finish.  */
+	while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
+		;
+}
+
+#define TS72XX_WDT_CONTROL_PHYS_BASE	0x23800000
+#define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
+#define TS72XX_WDT_FEED_VAL		0x05
+
+static inline void __maybe_unused ts72xx_watchdog_disable(void)
+{
+	__raw_writeb(TS72XX_WDT_FEED_VAL, TS72XX_WDT_FEED_PHYS_BASE);
+	__raw_writeb(0, TS72XX_WDT_CONTROL_PHYS_BASE);
+}
+
+static inline void ep93xx_decomp_setup(void)
+{
+	if (machine_is_ts72xx())
+		ts72xx_watchdog_disable();
+
+	if (machine_is_edb9301() ||
+	    machine_is_edb9302() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9307() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9312() ||
+	    machine_is_edb9315() ||
+	    machine_is_edb9315a() ||
+	    machine_is_edb9315a() ||
+	    machine_is_ts72xx() ||
+	    machine_is_bk3() ||
+	    machine_is_vision_ep9307())
+		ep93xx_ethernet_reset();
+}
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index d4f891f56996..6c41b270560e 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * misc.c
  * 
@@ -21,9 +22,12 @@ unsigned int __machine_arch_type;
 #include <linux/compiler.h>	/* for inline */
 #include <linux/types.h>
 #include <linux/linkage.h>
+#include "misc.h"
+#ifdef CONFIG_ARCH_EP93XX
+#include "misc-ep93xx.h"
+#endif
 
 static void putstr(const char *ptr);
-extern void error(char *x);
 
 #include CONFIG_UNCOMPRESS_INCLUDE
 
@@ -99,9 +103,6 @@ static void putstr(const char *ptr)
 /*
  * gzip declarations
  */
-extern char input_data[];
-extern char input_data_end[];
-
 unsigned char *output_data;
 
 unsigned long free_mem_ptr;
@@ -127,21 +128,6 @@ asmlinkage void __div0(void)
 	error("Attempting division by 0!");
 }
 
-unsigned long __stack_chk_guard;
-
-void __stack_chk_guard_setup(void)
-{
-	__stack_chk_guard = 0x000a0dff;
-}
-
-void __stack_chk_fail(void)
-{
-	error("stack-protector: Kernel stack is corrupted\n");
-}
-
-extern int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
-
-
 void
 decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 		unsigned long free_mem_ptr_end_p,
@@ -149,13 +135,14 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 {
 	int ret;
 
-	__stack_chk_guard_setup();
-
 	output_data		= (unsigned char *)output_start;
 	free_mem_ptr		= free_mem_ptr_p;
 	free_mem_end_ptr	= free_mem_ptr_end_p;
 	__machine_arch_type	= arch_id;
 
+#ifdef CONFIG_ARCH_EP93XX
+	ep93xx_decomp_setup();
+#endif
 	arch_decomp_setup();
 
 	putstr("Uncompressing Linux...");
@@ -166,3 +153,8 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 	else
 		putstr(" done, booting the kernel.\n");
 }
+
+void __fortify_panic(const u8 reason, size_t avail, size_t size)
+{
+	error("detected buffer overflow");
+}
diff --git a/arch/arm/boot/compressed/misc.h b/arch/arm/boot/compressed/misc.h
new file mode 100644
index 000000000000..8c73940b5fe4
--- /dev/null
+++ b/arch/arm/boot/compressed/misc.h
@@ -0,0 +1,21 @@
+#ifndef MISC_H
+#define MISC_H
+
+#include <linux/compiler.h>
+
+void error(char *x) __noreturn;
+extern unsigned long free_mem_ptr;
+extern unsigned long free_mem_end_ptr;
+void __div0(void);
+void
+decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
+		  unsigned long free_mem_ptr_end_p, int arch_id);
+void __fortify_panic(const u8 reason, size_t avail, size_t size);
+int atags_to_fdt(void *atag_list, void *fdt, int total_space);
+uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt);
+int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
+
+extern char input_data[];
+extern char input_data_end[];
+
+#endif
diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c
deleted file mode 100644
index 672ae95db5c3..000000000000
--- a/arch/arm/boot/compressed/mmcif-sh7372.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * sh7372 MMCIF loader
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/boot.h>
-#include <mach/mmc.h>
-
-#define MMCIF_BASE      (void __iomem *)0xe6bd0000
-
-#define PORT84CR	(void __iomem *)0xe6050054
-#define PORT85CR	(void __iomem *)0xe6050055
-#define PORT86CR	(void __iomem *)0xe6050056
-#define PORT87CR	(void __iomem *)0xe6050057
-#define PORT88CR	(void __iomem *)0xe6050058
-#define PORT89CR	(void __iomem *)0xe6050059
-#define PORT90CR	(void __iomem *)0xe605005a
-#define PORT91CR	(void __iomem *)0xe605005b
-#define PORT92CR	(void __iomem *)0xe605005c
-#define PORT99CR	(void __iomem *)0xe6050063
-
-#define SMSTPCR3	(void __iomem *)0xe615013c
-
-/* SH7372 specific MMCIF loader
- *
- * loads the zImage from an MMC card starting from block 1.
- *
- * The image must be start with a vrl4 header and
- * the zImage must start at offset 512 of the image. That is,
- * at block 2 (=byte 1024) on the media
- *
- * Use the following line to write the vrl4 formated zImage
- * to an MMC card
- * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1
- */
-asmlinkage void mmc_loader(unsigned char *buf, unsigned long len)
-{
-	mmc_init_progress();
-	mmc_update_progress(MMC_PROGRESS_ENTER);
-
-	/* Initialise MMC
-	 * registers: PORT84CR-PORT92CR
-	 *            (MMCD0_0-MMCD0_7,MMCCMD0 Control)
-	 * value: 0x04 - select function 4
-	 */
-	 __raw_writeb(0x04, PORT84CR);
-	 __raw_writeb(0x04, PORT85CR);
-	 __raw_writeb(0x04, PORT86CR);
-	 __raw_writeb(0x04, PORT87CR);
-	 __raw_writeb(0x04, PORT88CR);
-	 __raw_writeb(0x04, PORT89CR);
-	 __raw_writeb(0x04, PORT90CR);
-	 __raw_writeb(0x04, PORT91CR);
-	 __raw_writeb(0x04, PORT92CR);
-
-	/* Initialise MMC
-	 * registers: PORT99CR (MMCCLK0 Control)
-	 * value: 0x10 | 0x04 - enable output | select function 4
-	 */
-	__raw_writeb(0x14, PORT99CR);
-
-	/* Enable clock to MMC hardware block */
-	__raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3);
-
-	mmc_update_progress(MMC_PROGRESS_INIT);
-
-	/* setup MMCIF hardware */
-	sh_mmcif_boot_init(MMCIF_BASE);
-
-	mmc_update_progress(MMC_PROGRESS_LOAD);
-
-	/* load kernel via MMCIF interface */
-	sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */
-			      (len + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS, buf);
-
-
-	/* Disable clock to MMC hardware block */
-	__raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3);
-
-	mmc_update_progress(MMC_PROGRESS_DONE);
-}
diff --git a/arch/arm/boot/compressed/piggy.S b/arch/arm/boot/compressed/piggy.S
new file mode 100644
index 000000000000..27577644ee72
--- /dev/null
+++ b/arch/arm/boot/compressed/piggy.S
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+	.section .piggydata, "a"
+	.globl	input_data
+input_data:
+	.incbin	"arch/arm/boot/compressed/piggy_data"
+	.globl	input_data_end
+input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.gzip.S b/arch/arm/boot/compressed/piggy.gzip.S
deleted file mode 100644
index a68adf91a165..000000000000
--- a/arch/arm/boot/compressed/piggy.gzip.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.gzip"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.lz4.S b/arch/arm/boot/compressed/piggy.lz4.S
deleted file mode 100644
index 3d9a575618a3..000000000000
--- a/arch/arm/boot/compressed/piggy.lz4.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.lz4"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.lzma.S b/arch/arm/boot/compressed/piggy.lzma.S
deleted file mode 100644
index d7e69cffbc0a..000000000000
--- a/arch/arm/boot/compressed/piggy.lzma.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.lzma"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.lzo.S b/arch/arm/boot/compressed/piggy.lzo.S
deleted file mode 100644
index a425ad95959a..000000000000
--- a/arch/arm/boot/compressed/piggy.lzo.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.lzo"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.xzkern.S b/arch/arm/boot/compressed/piggy.xzkern.S
deleted file mode 100644
index 5703f300d027..000000000000
--- a/arch/arm/boot/compressed/piggy.xzkern.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.xzkern"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c
deleted file mode 100644
index d279294f2381..000000000000
--- a/arch/arm/boot/compressed/sdhi-sh7372.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * SuperH Mobile SDHI
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 Kuninori Morimoto
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Parts inspired by u-boot
- */
-
-#include <linux/io.h>
-#include <mach/mmc.h>
-#include <linux/mmc/boot.h>
-#include <linux/mmc/tmio.h>
-
-#include "sdhi-shmobile.h"
-
-#define PORT179CR       0xe60520b3
-#define PORT180CR       0xe60520b4
-#define PORT181CR       0xe60520b5
-#define PORT182CR       0xe60520b6
-#define PORT183CR       0xe60520b7
-#define PORT184CR       0xe60520b8
-
-#define SMSTPCR3        0xe615013c
-
-#define CR_INPUT_ENABLE 0x10
-#define CR_FUNCTION1    0x01
-
-#define SDHI1_BASE	(void __iomem *)0xe6860000
-#define SDHI_BASE	SDHI1_BASE
-
-/*  SuperH Mobile SDHI loader
- *
- * loads the zImage from an SD card starting from block 0
- * on physical partition 1
- *
- * The image must be start with a vrl4 header and
- * the zImage must start at offset 512 of the image. That is,
- * at block 1 (=byte 512) of physical partition 1
- *
- * Use the following line to write the vrl4 formated zImage
- * to an SD card
- * # dd if=vrl4.out of=/dev/sdx bs=512
- */
-asmlinkage void mmc_loader(unsigned short *buf, unsigned long len)
-{
-	int high_capacity;
-
-	mmc_init_progress();
-
-	mmc_update_progress(MMC_PROGRESS_ENTER);
-        /* Initialise SDHI1 */
-        /* PORT184CR: GPIO_FN_SDHICMD1 Control */
-        __raw_writeb(CR_FUNCTION1, PORT184CR);
-        /* PORT179CR: GPIO_FN_SDHICLK1 Control */
-        __raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR);
-        /* PORT181CR: GPIO_FN_SDHID1_3 Control */
-        __raw_writeb(CR_FUNCTION1, PORT183CR);
-        /* PORT182CR: GPIO_FN_SDHID1_2 Control */
-        __raw_writeb(CR_FUNCTION1, PORT182CR);
-        /* PORT183CR: GPIO_FN_SDHID1_1 Control */
-        __raw_writeb(CR_FUNCTION1, PORT181CR);
-        /* PORT180CR: GPIO_FN_SDHID1_0 Control */
-        __raw_writeb(CR_FUNCTION1, PORT180CR);
-
-        /* Enable clock to SDHI1 hardware block */
-        __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3);
-
-	/* setup SDHI hardware */
-	mmc_update_progress(MMC_PROGRESS_INIT);
-	high_capacity = sdhi_boot_init(SDHI_BASE);
-	if (high_capacity < 0)
-		goto err;
-
-	mmc_update_progress(MMC_PROGRESS_LOAD);
-	/* load kernel */
-	if (sdhi_boot_do_read(SDHI_BASE, high_capacity,
-			      0, /* Kernel is at block 1 */
-			      (len + TMIO_BBS - 1) / TMIO_BBS, buf))
-		goto err;
-
-        /* Disable clock to SDHI1 hardware block */
-        __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3);
-
-	mmc_update_progress(MMC_PROGRESS_DONE);
-
-	return;
-err:
-	for(;;);
-}
diff --git a/arch/arm/boot/compressed/sdhi-shmobile.c b/arch/arm/boot/compressed/sdhi-shmobile.c
deleted file mode 100644
index bd3d46980955..000000000000
--- a/arch/arm/boot/compressed/sdhi-shmobile.c
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- * SuperH Mobile SDHI
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 Kuninori Morimoto
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Parts inspired by u-boot
- */
-
-#include <linux/io.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/core.h>
-#include <linux/mmc/mmc.h>
-#include <linux/mmc/sd.h>
-#include <linux/mmc/tmio.h>
-#include <mach/sdhi.h>
-
-#define OCR_FASTBOOT		(1<<29)
-#define OCR_HCS			(1<<30)
-#define OCR_BUSY		(1<<31)
-
-#define RESP_CMD12		0x00000030
-
-static inline u16 sd_ctrl_read16(void __iomem *base, int addr)
-{
-        return __raw_readw(base + addr);
-}
-
-static inline u32 sd_ctrl_read32(void __iomem *base, int addr)
-{
-	return __raw_readw(base + addr) |
-	       __raw_readw(base + addr + 2) << 16;
-}
-
-static inline void sd_ctrl_write16(void __iomem *base, int addr, u16 val)
-{
-	__raw_writew(val, base + addr);
-}
-
-static inline void sd_ctrl_write32(void __iomem *base, int addr, u32 val)
-{
-	__raw_writew(val, base + addr);
-	__raw_writew(val >> 16, base + addr + 2);
-}
-
-#define ALL_ERROR (TMIO_STAT_CMD_IDX_ERR | TMIO_STAT_CRCFAIL |		\
-		   TMIO_STAT_STOPBIT_ERR | TMIO_STAT_DATATIMEOUT |	\
-		   TMIO_STAT_RXOVERFLOW | TMIO_STAT_TXUNDERRUN |	\
-		   TMIO_STAT_CMDTIMEOUT | TMIO_STAT_ILL_ACCESS |	\
-		   TMIO_STAT_ILL_FUNC)
-
-static int sdhi_intr(void __iomem *base)
-{
-	unsigned long state = sd_ctrl_read32(base, CTL_STATUS);
-
-	if (state & ALL_ERROR) {
-		sd_ctrl_write32(base, CTL_STATUS, ~ALL_ERROR);
-		sd_ctrl_write32(base, CTL_IRQ_MASK,
-				ALL_ERROR |
-				sd_ctrl_read32(base, CTL_IRQ_MASK));
-		return -EINVAL;
-	}
-	if (state & TMIO_STAT_CMDRESPEND) {
-		sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND);
-		sd_ctrl_write32(base, CTL_IRQ_MASK,
-				TMIO_STAT_CMDRESPEND |
-				sd_ctrl_read32(base, CTL_IRQ_MASK));
-		return 0;
-	}
-	if (state & TMIO_STAT_RXRDY) {
-		sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_RXRDY);
-		sd_ctrl_write32(base, CTL_IRQ_MASK,
-				TMIO_STAT_RXRDY | TMIO_STAT_TXUNDERRUN |
-				sd_ctrl_read32(base, CTL_IRQ_MASK));
-		return 0;
-	}
-	if (state & TMIO_STAT_DATAEND) {
-		sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_DATAEND);
-		sd_ctrl_write32(base, CTL_IRQ_MASK,
-				TMIO_STAT_DATAEND |
-				sd_ctrl_read32(base, CTL_IRQ_MASK));
-		return 0;
-	}
-
-	return -EAGAIN;
-}
-
-static int sdhi_boot_wait_resp_end(void __iomem *base)
-{
-	int err = -EAGAIN, timeout = 10000000;
-
-	while (timeout--) {
-		err = sdhi_intr(base);
-		if (err != -EAGAIN)
-			break;
-		udelay(1);
-	}
-
-	return err;
-}
-
-/* SDHI_CLK_CTRL */
-#define CLK_MMC_ENABLE                 (1 << 8)
-#define CLK_MMC_INIT                   (1 << 6)        /* clk / 256 */
-
-static void sdhi_boot_mmc_clk_stop(void __iomem *base)
-{
-	sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, 0x0000);
-	msleep(10);
-	sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, ~CLK_MMC_ENABLE &
-		sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL));
-	msleep(10);
-}
-
-static void sdhi_boot_mmc_clk_start(void __iomem *base)
-{
-	sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, CLK_MMC_ENABLE |
-		sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL));
-	msleep(10);
-	sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, CLK_MMC_ENABLE);
-	msleep(10);
-}
-
-static void sdhi_boot_reset(void __iomem *base)
-{
-	sd_ctrl_write16(base, CTL_RESET_SD, 0x0000);
-	msleep(10);
-	sd_ctrl_write16(base, CTL_RESET_SD, 0x0001);
-	msleep(10);
-}
-
-/* Set MMC clock / power.
- * Note: This controller uses a simple divider scheme therefore it cannot
- * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
- * MMC wont run that fast, it has to be clocked at 12MHz which is the next
- * slowest setting.
- */
-static int sdhi_boot_mmc_set_ios(void __iomem *base, struct mmc_ios *ios)
-{
-	if (sd_ctrl_read32(base, CTL_STATUS) & TMIO_STAT_CMD_BUSY)
-		return -EBUSY;
-
-	if (ios->clock)
-		sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL,
-				ios->clock | CLK_MMC_ENABLE);
-
-	/* Power sequence - OFF -> ON -> UP */
-	switch (ios->power_mode) {
-	case MMC_POWER_OFF: /* power down SD bus */
-		sdhi_boot_mmc_clk_stop(base);
-		break;
-	case MMC_POWER_ON: /* power up SD bus */
-		break;
-	case MMC_POWER_UP: /* start bus clock */
-		sdhi_boot_mmc_clk_start(base);
-		break;
-	}
-
-	switch (ios->bus_width) {
-	case MMC_BUS_WIDTH_1:
-		sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x80e0);
-	break;
-	case MMC_BUS_WIDTH_4:
-		sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x00e0);
-	break;
-	}
-
-	/* Let things settle. delay taken from winCE driver */
-	udelay(140);
-
-	return 0;
-}
-
-/* These are the bitmasks the tmio chip requires to implement the MMC response
- * types. Note that R1 and R6 are the same in this scheme. */
-#define RESP_NONE      0x0300
-#define RESP_R1        0x0400
-#define RESP_R1B       0x0500
-#define RESP_R2        0x0600
-#define RESP_R3        0x0700
-#define DATA_PRESENT   0x0800
-#define TRANSFER_READ  0x1000
-
-static int sdhi_boot_request(void __iomem *base, struct mmc_command *cmd)
-{
-	int err, c = cmd->opcode;
-
-	switch (mmc_resp_type(cmd)) {
-	case MMC_RSP_NONE: c |= RESP_NONE; break;
-	case MMC_RSP_R1:   c |= RESP_R1;   break;
-	case MMC_RSP_R1B:  c |= RESP_R1B;  break;
-	case MMC_RSP_R2:   c |= RESP_R2;   break;
-	case MMC_RSP_R3:   c |= RESP_R3;   break;
-	default:
-		return -EINVAL;
-	}
-
-	/* No interrupts so this may not be cleared */
-	sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND);
-
-	sd_ctrl_write32(base, CTL_IRQ_MASK, TMIO_STAT_CMDRESPEND |
-			sd_ctrl_read32(base, CTL_IRQ_MASK));
-	sd_ctrl_write32(base, CTL_ARG_REG, cmd->arg);
-	sd_ctrl_write16(base, CTL_SD_CMD, c);
-
-
-	sd_ctrl_write32(base, CTL_IRQ_MASK,
-			~(TMIO_STAT_CMDRESPEND | ALL_ERROR) &
-			sd_ctrl_read32(base, CTL_IRQ_MASK));
-
-	err = sdhi_boot_wait_resp_end(base);
-	if (err)
-		return err;
-
-	cmd->resp[0] = sd_ctrl_read32(base, CTL_RESPONSE);
-
-	return 0;
-}
-
-static int sdhi_boot_do_read_single(void __iomem *base, int high_capacity,
-				    unsigned long block, unsigned short *buf)
-{
-	int err, i;
-
-	/* CMD17 - Read */
-	{
-		struct mmc_command cmd;
-
-		cmd.opcode = MMC_READ_SINGLE_BLOCK | \
-			     TRANSFER_READ | DATA_PRESENT;
-		if (high_capacity)
-			cmd.arg = block;
-		else
-			cmd.arg = block * TMIO_BBS;
-		cmd.flags = MMC_RSP_R1;
-		err = sdhi_boot_request(base, &cmd);
-		if (err)
-			return err;
-	}
-
-	sd_ctrl_write32(base, CTL_IRQ_MASK,
-			~(TMIO_STAT_DATAEND | TMIO_STAT_RXRDY |
-			  TMIO_STAT_TXUNDERRUN) &
-			sd_ctrl_read32(base, CTL_IRQ_MASK));
-	err = sdhi_boot_wait_resp_end(base);
-	if (err)
-		return err;
-
-	sd_ctrl_write16(base, CTL_SD_XFER_LEN, TMIO_BBS);
-	for (i = 0; i < TMIO_BBS / sizeof(*buf); i++)
-		*buf++ = sd_ctrl_read16(base, RESP_CMD12);
-
-	err = sdhi_boot_wait_resp_end(base);
-	if (err)
-		return err;
-
-	return 0;
-}
-
-int sdhi_boot_do_read(void __iomem *base, int high_capacity,
-		      unsigned long offset, unsigned short count,
-		      unsigned short *buf)
-{
-	unsigned long i;
-	int err = 0;
-
-	for (i = 0; i < count; i++) {
-		err = sdhi_boot_do_read_single(base, high_capacity, offset + i,
-					       buf + (i * TMIO_BBS /
-						      sizeof(*buf)));
-		if (err)
-			return err;
-	}
-
-	return 0;
-}
-
-#define VOLTAGES (MMC_VDD_32_33 | MMC_VDD_33_34)
-
-int sdhi_boot_init(void __iomem *base)
-{
-	bool sd_v2 = false, sd_v1_0 = false;
-	unsigned short cid;
-	int err, high_capacity = 0;
-
-	sdhi_boot_mmc_clk_stop(base);
-	sdhi_boot_reset(base);
-
-	/* mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 */
-	{
-		struct mmc_ios ios;
-		ios.power_mode = MMC_POWER_ON;
-		ios.bus_width = MMC_BUS_WIDTH_1;
-		ios.clock = CLK_MMC_INIT;
-		err = sdhi_boot_mmc_set_ios(base, &ios);
-		if (err)
-			return err;
-	}
-
-	/* CMD0 */
-	{
-		struct mmc_command cmd;
-		msleep(1);
-		cmd.opcode = MMC_GO_IDLE_STATE;
-		cmd.arg = 0;
-		cmd.flags = MMC_RSP_NONE;
-		err = sdhi_boot_request(base, &cmd);
-		if (err)
-			return err;
-		msleep(2);
-	}
-
-	/* CMD8 - Test for SD version 2 */
-	{
-		struct mmc_command cmd;
-		cmd.opcode = SD_SEND_IF_COND;
-		cmd.arg = (VOLTAGES != 0) << 8 | 0xaa;
-		cmd.flags = MMC_RSP_R1;
-		err = sdhi_boot_request(base, &cmd); /* Ignore error */
-		if ((cmd.resp[0] & 0xff) == 0xaa)
-			sd_v2 = true;
-	}
-
-	/* CMD55 - Get OCR (SD) */
-	{
-		int timeout = 1000;
-		struct mmc_command cmd;
-
-		cmd.arg = 0;
-
-		do {
-			cmd.opcode = MMC_APP_CMD;
-			cmd.flags = MMC_RSP_R1;
-			cmd.arg = 0;
-			err = sdhi_boot_request(base, &cmd);
-			if (err)
-				break;
-
-			cmd.opcode = SD_APP_OP_COND;
-			cmd.flags = MMC_RSP_R3;
-			cmd.arg = (VOLTAGES & 0xff8000);
-			if (sd_v2)
-				cmd.arg |= OCR_HCS;
-			cmd.arg |= OCR_FASTBOOT;
-			err = sdhi_boot_request(base, &cmd);
-			if (err)
-				break;
-
-			msleep(1);
-		} while((!(cmd.resp[0] & OCR_BUSY)) && --timeout);
-
-		if (!err && timeout) {
-			if (!sd_v2)
-				sd_v1_0 = true;
-			high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS;
-		}
-	}
-
-	/* CMD1 - Get OCR (MMC) */
-	if (!sd_v2 && !sd_v1_0) {
-		int timeout = 1000;
-		struct mmc_command cmd;
-
-		do {
-			cmd.opcode = MMC_SEND_OP_COND;
-			cmd.arg = VOLTAGES | OCR_HCS;
-			cmd.flags = MMC_RSP_R3;
-			err = sdhi_boot_request(base, &cmd);
-			if (err)
-				return err;
-
-			msleep(1);
-		} while((!(cmd.resp[0] & OCR_BUSY)) && --timeout);
-
-		if (!timeout)
-			return -EAGAIN;
-
-		high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS;
-	}
-
-	/* CMD2 - Get CID */
-	{
-		struct mmc_command cmd;
-		cmd.opcode = MMC_ALL_SEND_CID;
-		cmd.arg = 0;
-		cmd.flags = MMC_RSP_R2;
-		err = sdhi_boot_request(base, &cmd);
-		if (err)
-			return err;
-	}
-
-	/* CMD3
-	 * MMC: Set the relative address
-	 * SD:  Get the relative address
-	 * Also puts the card into the standby state
-	 */
-	{
-		struct mmc_command cmd;
-		cmd.opcode = MMC_SET_RELATIVE_ADDR;
-		cmd.arg = 0;
-		cmd.flags = MMC_RSP_R1;
-		err = sdhi_boot_request(base, &cmd);
-		if (err)
-			return err;
-		cid = cmd.resp[0] >> 16;
-	}
-
-	/* CMD9 - Get CSD */
-	{
-		struct mmc_command cmd;
-		cmd.opcode = MMC_SEND_CSD;
-		cmd.arg = cid << 16;
-		cmd.flags = MMC_RSP_R2;
-		err = sdhi_boot_request(base, &cmd);
-		if (err)
-			return err;
-	}
-
-	/* CMD7 - Select the card */
-	{
-		struct mmc_command cmd;
-		cmd.opcode = MMC_SELECT_CARD;
-		//cmd.arg = rca << 16;
-		cmd.arg = cid << 16;
-		//cmd.flags = MMC_RSP_R1B;
-		cmd.flags = MMC_RSP_R1;
-		err = sdhi_boot_request(base, &cmd);
-		if (err)
-			return err;
-	}
-
-	/* CMD16 - Set the block size */
-	{
-		struct mmc_command cmd;
-		cmd.opcode = MMC_SET_BLOCKLEN;
-		cmd.arg = TMIO_BBS;
-		cmd.flags = MMC_RSP_R1;
-		err = sdhi_boot_request(base, &cmd);
-		if (err)
-			return err;
-	}
-
-	return high_capacity;
-}
diff --git a/arch/arm/boot/compressed/sdhi-shmobile.h b/arch/arm/boot/compressed/sdhi-shmobile.h
deleted file mode 100644
index 92eaa09f985e..000000000000
--- a/arch/arm/boot/compressed/sdhi-shmobile.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef SDHI_MOBILE_H
-#define SDHI_MOBILE_H
-
-#include <linux/compiler.h>
-
-int sdhi_boot_do_read(void __iomem *base, int high_capacity,
-		      unsigned long offset, unsigned short count,
-		      unsigned short *buf);
-int sdhi_boot_init(void __iomem *base);
-
-#endif
diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c
index 36e53ef9200f..fcc678fce045 100644
--- a/arch/arm/boot/compressed/string.c
+++ b/arch/arm/boot/compressed/string.c
@@ -1,11 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * arch/arm/boot/compressed/string.c
  *
  * Small subset of simple string routines
  */
 
+#define __NO_FORTIFY
 #include <linux/string.h>
 
+/*
+ * The decompressor is built without KASan but uses the same redirects as the
+ * rest of the kernel when CONFIG_KASAN is enabled, defining e.g. memcpy()
+ * to __memcpy() but since we are not linking with the main kernel string
+ * library in the decompressor, that will lead to link failures.
+ *
+ * Undefine KASan's versions, define the wrapped functions and alias them to
+ * the right names so that when e.g. __memcpy() appear in the code, it will
+ * still be linked to this local version of memcpy().
+ */
+#ifdef CONFIG_KASAN
+#undef memcpy
+#undef memmove
+#undef memset
+void *__memcpy(void *__dest, __const void *__src, size_t __n) __alias(memcpy);
+void *__memmove(void *__dest, __const void *__src, size_t count) __alias(memmove);
+void *__memset(void *s, int c, size_t count) __alias(memset);
+#endif
+
 void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
 	int i = 0;
@@ -65,6 +86,15 @@ size_t strlen(const char *s)
 	return sc - s;
 }
 
+size_t strnlen(const char *s, size_t count)
+{
+	const char *sc;
+
+	for (sc = s; count-- && *sc != '\0'; ++sc)
+		/* nothing */;
+	return sc - s;
+}
+
 int memcmp(const void *cs, const void *ct, size_t count)
 {
 	const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count;
@@ -111,6 +141,16 @@ char *strchr(const char *s, int c)
 	return (char *)s;
 }
 
+char *strrchr(const char *s, int c)
+{
+	const char *last = NULL;
+	do {
+		if (*s == (char)c)
+			last = s;
+	} while (*s++);
+	return (char *)last;
+}
+
 #undef memset
 
 void *memset(void *s, int c, size_t count)
@@ -120,8 +160,3 @@ void *memset(void *s, int c, size_t count)
 		*xs++ = c;
 	return s;
 }
-
-void __memzero(void *s, size_t count)
-{
-	memset(s, 0, count);
-}
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S
index 2b60b843ac5e..d411abd4310e 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -1,10 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
+#include <asm/vmlinux.lds.h>
 
 #ifdef CONFIG_CPU_ENDIAN_BE8
 #define ZIMAGE_MAGIC(x) ( (((x) >> 24) & 0x000000ff) | \
@@ -20,8 +18,12 @@ ENTRY(_start)
 SECTIONS
 {
   /DISCARD/ : {
+    COMMON_DISCARDS
     *(.ARM.exidx*)
     *(.ARM.extab*)
+    *(.note.*)
+    *(.rel.*)
+    *(.printk_index)
     /*
      * Discard any r/w data - this produces a link error if we have any,
      * which is required for PIC decompression.  Local data generates
@@ -39,49 +41,103 @@ SECTIONS
     *(.start)
     *(.text)
     *(.text.*)
-    *(.fixup)
-    *(.gnu.warning)
-    *(.glue_7t)
-    *(.glue_7)
+    ARM_STUBS_TEXT
+  }
+  .table : ALIGN(4) {
+    _table_start = .;
+    LONG(ZIMAGE_MAGIC(6))
+    LONG(ZIMAGE_MAGIC(0x5a534c4b))
+    LONG(ZIMAGE_MAGIC(__piggy_size_addr - _start))
+    LONG(ZIMAGE_MAGIC(_kernel_bss_size))
+    LONG(ZIMAGE_MAGIC(TEXT_OFFSET))
+    LONG(ZIMAGE_MAGIC(MALLOC_SIZE))
+    LONG(0)
+    _table_end = .;
   }
   .rodata : {
     *(.rodata)
     *(.rodata.*)
+    *(.data.rel.ro)
+    *(.data.rel.ro.*)
   }
   .piggydata : {
     *(.piggydata)
+    __piggy_size_addr = . - 4;
   }
 
   . = ALIGN(4);
   _etext = .;
 
   .got.plt		: { *(.got.plt) }
+#ifndef CONFIG_EFI_STUB
   _got_start = .;
   .got			: { *(.got) }
   _got_end = .;
+#endif
 
   /* ensure the zImage file size is always a multiple of 64 bits */
   /* (without a dummy byte, ld just ignores the empty section) */
   .pad			: { BYTE(0); . = ALIGN(8); }
+
+#ifdef CONFIG_EFI_STUB
+  .data : ALIGN(4096) {
+    __pecoff_data_start = .;
+    _got_start = .;
+    *(.got)
+    _got_end = .;
+    /*
+     * The EFI stub always executes from RAM, and runs strictly before the
+     * decompressor, so we can make an exception for its r/w data, and keep it
+     */
+    *(.data.efistub .bss.efistub)
+    __pecoff_data_end = .;
+
+    /*
+     * PE/COFF mandates a file size which is a multiple of 512 bytes if the
+     * section size equals or exceeds 4 KB
+     */
+    . = ALIGN(512);
+  }
+  __pecoff_data_rawsize = . - ADDR(.data);
+#endif
+
   _edata = .;
 
+  /*
+   * The image_end section appears after any additional loadable sections
+   * that the linker may decide to insert in the binary image.  Having
+   * this symbol allows further debug in the near future.
+   */
+  .image_end (NOLOAD) : {
+    /*
+     * EFI requires that the image is aligned to 512 bytes, and appended
+     * DTB requires that we know where the end of the image is.  Ensure
+     * that both are satisfied by ensuring that there are no additional
+     * sections emitted into the decompressor image.
+     */
+    _edata_real = .;
+  }
+
   _magic_sig = ZIMAGE_MAGIC(0x016f2818);
   _magic_start = ZIMAGE_MAGIC(_start);
   _magic_end = ZIMAGE_MAGIC(_edata);
+  _magic_table = ZIMAGE_MAGIC(_table_start - _start);
 
   . = BSS_START;
   __bss_start = .;
-  .bss			: { *(.bss) }
+  .bss			: { *(.bss .bss.*) }
   _end = .;
 
   . = ALIGN(8);		/* the stack must be 64-bit aligned */
   .stack		: { *(.stack) }
 
-  .stab 0		: { *(.stab) }
-  .stabstr 0		: { *(.stabstr) }
-  .stab.excl 0		: { *(.stab.excl) }
-  .stab.exclstr 0	: { *(.stab.exclstr) }
-  .stab.index 0		: { *(.stab.index) }
-  .stab.indexstr 0	: { *(.stab.indexstr) }
-  .comment 0		: { *(.comment) }
+  PROVIDE(__pecoff_data_size = ALIGN(512) - ADDR(.data));
+  PROVIDE(__pecoff_end = ALIGN(512));
+
+  STABS_DEBUG
+  DWARF_DEBUG
+  ARM_DETAILS
+
+  ARM_ASSERTS
 }
+ASSERT(_edata_real == _edata, "error: zImage file size is incorrect");
diff --git a/arch/arm/boot/deflate_xip_data.sh b/arch/arm/boot/deflate_xip_data.sh
new file mode 100755
index 000000000000..304495c3c2c5
--- /dev/null
+++ b/arch/arm/boot/deflate_xip_data.sh
@@ -0,0 +1,62 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-only
+
+# XIP kernel .data segment compressor
+#
+# Created by:	Nicolas Pitre, August 2017
+# Copyright:	(C) 2017  Linaro Limited
+#
+
+# This script locates the start of the .data section in xipImage and
+# substitutes it with a compressed version. The needed offsets are obtained
+# from symbol addresses in vmlinux. It is expected that .data extends to
+# the end of xipImage.
+
+set -e
+
+VMLINUX="$1"
+XIPIMAGE="$2"
+
+DD="dd status=none"
+
+# Use "make V=1" to debug this script.
+case "$KBUILD_VERBOSE" in
+*1*)
+	set -x
+	;;
+esac
+
+sym_val() {
+	# extract hex value for symbol in $1
+	local val=$($NM "$VMLINUX" 2>/dev/null | sed -n "/ $1\$/{s/ .*$//p;q}")
+	[ "$val" ] || { echo "can't find $1 in $VMLINUX" 1>&2; exit 1; }
+	# convert from hex to decimal
+	echo $((0x$val))
+}
+
+__data_loc=$(sym_val __data_loc)
+_edata_loc=$(sym_val _edata_loc)
+base_offset=$(sym_val _xiprom)
+
+# convert to file based offsets
+data_start=$(($__data_loc - $base_offset))
+data_end=$(($_edata_loc - $base_offset))
+
+# Make sure data occupies the last part of the file.
+file_end=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" "$XIPIMAGE")
+if [ "$file_end" != "$data_end" ]; then
+	printf "end of xipImage doesn't match with _edata_loc (%#x vs %#x)\n" \
+	       $(($file_end + $base_offset)) $_edata_loc 1>&2
+	exit 1;
+fi
+
+# be ready to clean up
+trap 'rm -f "$XIPIMAGE.tmp"; exit 1' 1 2 3
+
+# substitute the data section by a compressed version
+$DD if="$XIPIMAGE" count=$data_start iflag=count_bytes of="$XIPIMAGE.tmp"
+$DD if="$XIPIMAGE"  skip=$data_start iflag=skip_bytes |
+$KGZIP -9 >> "$XIPIMAGE.tmp"
+
+# replace kernel binary
+mv -f "$XIPIMAGE.tmp" "$XIPIMAGE"
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 38c89cafa1ab..efe38eb25301 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1,531 +1,41 @@
-ifeq ($(CONFIG_OF),y)
-
-# Keep at91 dtb files sorted alphabetically for each SoC
-# rm9200
-dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += mpa1600.dtb
-# sam9260
-dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91-qil_a9260.dtb
-dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb
-dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
-dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
-dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb
-dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb
-# sam9261
-dtb-$(CONFIG_ARCH_AT91) += at91sam9261ek.dtb
-# sam9263
-dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
-dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb
-# sam9g20
-dtb-$(CONFIG_ARCH_AT91) += at91-foxg20.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb
-dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb
-dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb
-dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
-dtb-$(CONFIG_ARCH_AT91) += usb_a9g20_lpw.dtb
-# sam9g45
-dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
-# sam9n12
-dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
-# sam9rl
-dtb-$(CONFIG_ARCH_AT91) += at91sam9rlek.dtb
-# sam9x5
-dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
-# sama5d3
-dtb-$(CONFIG_ARCH_AT91)	+= at91-sama5d3_xplained.dtb
-dtb-$(CONFIG_ARCH_AT91)	+= sama5d31ek.dtb
-dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
-dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
-dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
-dtb-$(CONFIG_ARCH_AT91)	+= sama5d36ek.dtb
-# sama5d4
-dtb-$(CONFIG_ARCH_AT91)	+= at91-sama5d4ek.dtb
-
-dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
-dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
-dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
-dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
-dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
-dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
-	bcm21664-garnet.dtb
-dtb-$(CONFIG_ARCH_BERLIN) += \
-	berlin2-sony-nsz-gs7.dtb	\
-	berlin2cd-google-chromecast.dtb	\
-	berlin2q-marvell-dmp.dtb
-dtb-$(CONFIG_ARCH_BRCMSTB) += \
-	bcm7445-bcm97445svmb.dtb
-dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
-	da850-evm.dtb
-dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
-dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
-	exynos4210-smdkv310.dtb \
-	exynos4210-trats.dtb \
-	exynos4210-universal_c210.dtb \
-	exynos4412-odroidu3.dtb \
-	exynos4412-odroidx.dtb \
-	exynos4412-odroidx2.dtb \
-	exynos4412-origen.dtb \
-	exynos4412-smdk4412.dtb \
-	exynos4412-tiny4412.dtb \
-	exynos4412-trats2.dtb \
-	exynos5250-arndale.dtb \
-	exynos5250-smdk5250.dtb \
-	exynos5250-snow.dtb \
-	exynos5260-xyref5260.dtb \
-	exynos5410-smdk5410.dtb \
-	exynos5420-arndale-octa.dtb \
-	exynos5420-peach-pit.dtb \
-	exynos5420-smdk5420.dtb \
-	exynos5440-sd5v1.dtb \
-	exynos5440-ssdk5440.dtb \
-	exynos5800-peach-pi.dtb
-dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb
-dtb-$(CONFIG_ARCH_HIX5HD2) += hisi-x5hd2-dkb.dtb
-dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
-	ecx-2000.dtb
-dtb-$(CONFIG_ARCH_HIP04) += hip04-d01.dtb
-dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
-	integratorcp.dtb
-dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \
-	k2l-evm.dtb \
-	k2e-evm.dtb
-dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
-	kirkwood-cloudbox.dtb \
-	kirkwood-d2net.dtb \
-	kirkwood-db-88f6281.dtb \
-	kirkwood-db-88f6282.dtb \
-	kirkwood-dns320.dtb \
-	kirkwood-dns325.dtb \
-	kirkwood-dockstar.dtb \
-	kirkwood-dreamplug.dtb \
-	kirkwood-ds109.dtb \
-	kirkwood-ds110jv10.dtb \
-	kirkwood-ds111.dtb \
-	kirkwood-ds209.dtb \
-	kirkwood-ds210.dtb \
-	kirkwood-ds212.dtb \
-	kirkwood-ds212j.dtb \
-	kirkwood-ds409.dtb \
-	kirkwood-ds409slim.dtb \
-	kirkwood-ds411.dtb \
-	kirkwood-ds411j.dtb \
-	kirkwood-ds411slim.dtb \
-	kirkwood-goflexnet.dtb \
-	kirkwood-guruplug-server-plus.dtb \
-	kirkwood-ib62x0.dtb \
-	kirkwood-iconnect.dtb \
-	kirkwood-iomega_ix2_200.dtb \
-	kirkwood-is2.dtb \
-	kirkwood-km_kirkwood.dtb \
-	kirkwood-laplug.dtb \
-	kirkwood-lschlv2.dtb \
-	kirkwood-lsxhl.dtb \
-	kirkwood-mplcec4.dtb \
-	kirkwood-mv88f6281gtw-ge.dtb \
-	kirkwood-net2big.dtb \
-	kirkwood-net5big.dtb \
-	kirkwood-netgear_readynas_duo_v2.dtb \
-	kirkwood-netgear_readynas_nv+_v2.dtb \
-	kirkwood-ns2.dtb \
-	kirkwood-ns2lite.dtb \
-	kirkwood-ns2max.dtb \
-	kirkwood-ns2mini.dtb \
-	kirkwood-nsa310.dtb \
-	kirkwood-nsa310a.dtb \
-	kirkwood-openblocks_a6.dtb \
-	kirkwood-openblocks_a7.dtb \
-	kirkwood-openrd-base.dtb \
-	kirkwood-openrd-client.dtb \
-	kirkwood-openrd-ultimate.dtb \
-	kirkwood-rd88f6192.dtb \
-	kirkwood-rd88f6281-z0.dtb \
-	kirkwood-rd88f6281-a.dtb \
-	kirkwood-rs212.dtb \
-	kirkwood-rs409.dtb \
-	kirkwood-rs411.dtb \
-	kirkwood-sheevaplug.dtb \
-	kirkwood-sheevaplug-esata.dtb \
-	kirkwood-t5325.dtb \
-	kirkwood-topkick.dtb \
-	kirkwood-ts219-6281.dtb \
-	kirkwood-ts219-6282.dtb \
-	kirkwood-ts419-6281.dtb \
-	kirkwood-ts419-6282.dtb
-dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
-dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
-dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb
-dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
-dtb-$(CONFIG_ARCH_MXC) += \
-	imx1-ads.dtb \
-	imx1-apf9328.dtb \
-	imx25-eukrea-mbimxsd25-baseboard.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
-	imx25-karo-tx25.dtb \
-	imx25-pdk.dtb \
-	imx27-apf27.dtb \
-	imx27-apf27dev.dtb \
-	imx27-eukrea-mbimxsd27-baseboard.dtb \
-	imx27-pdk.dtb \
-	imx27-phytec-phycore-rdk.dtb \
-	imx27-phytec-phycard-s-rdk.dtb \
-	imx31-bug.dtb \
-	imx35-eukrea-mbimxsd35-baseboard.dtb \
-	imx35-pdk.dtb \
-	imx50-evk.dtb \
-	imx51-apf51.dtb \
-	imx51-apf51dev.dtb \
-	imx51-babbage.dtb \
-	imx51-digi-connectcore-jsk.dtb \
-	imx51-eukrea-mbimxsd51-baseboard.dtb \
-	imx53-ard.dtb \
-	imx53-m53evk.dtb \
-	imx53-mba53.dtb \
-	imx53-qsb.dtb \
-	imx53-qsrb.dtb \
-	imx53-smd.dtb \
-	imx53-tx53-x03x.dtb \
-	imx53-tx53-x13x.dtb \
-	imx53-voipac-bsb.dtb \
-	imx6dl-aristainetos_4.dtb \
-	imx6dl-aristainetos_7.dtb \
-	imx6dl-cubox-i.dtb \
-	imx6dl-dfi-fs700-m60.dtb \
-	imx6dl-gw51xx.dtb \
-	imx6dl-gw52xx.dtb \
-	imx6dl-gw53xx.dtb \
-	imx6dl-gw54xx.dtb \
-	imx6dl-gw552x.dtb \
-	imx6dl-hummingboard.dtb \
-	imx6dl-nitrogen6x.dtb \
-	imx6dl-phytec-pbab01.dtb \
-	imx6dl-rex-basic.dtb \
-	imx6dl-riotboard.dtb \
-	imx6dl-sabreauto.dtb \
-	imx6dl-sabrelite.dtb \
-	imx6dl-sabresd.dtb \
-	imx6dl-tx6dl-comtft.dtb \
-	imx6dl-tx6u-801x.dtb \
-	imx6dl-tx6u-811x.dtb \
-	imx6dl-wandboard.dtb \
-	imx6dl-wandboard-revb1.dtb \
-	imx6q-arm2.dtb \
-	imx6q-cm-fx6.dtb \
-	imx6q-cubox-i.dtb \
-	imx6q-dfi-fs700-m60.dtb \
-	imx6q-dmo-edmqmx6.dtb \
-	imx6q-gk802.dtb \
-	imx6q-gw51xx.dtb \
-	imx6q-gw52xx.dtb \
-	imx6q-gw53xx.dtb \
-	imx6q-gw5400-a.dtb \
-	imx6q-gw54xx.dtb \
-	imx6q-gw552x.dtb \
-	imx6q-hummingboard.dtb \
-	imx6q-nitrogen6x.dtb \
-	imx6q-phytec-pbab01.dtb \
-	imx6q-rex-pro.dtb \
-	imx6q-sabreauto.dtb \
-	imx6q-sabrelite.dtb \
-	imx6q-sabresd.dtb \
-	imx6q-sbc6x.dtb \
-	imx6q-udoo.dtb \
-	imx6q-wandboard.dtb \
-	imx6q-wandboard-revb1.dtb \
-	imx6q-tx6q-1010.dtb \
-	imx6q-tx6q-1010-comtft.dtb \
-	imx6q-tx6q-1020.dtb \
-	imx6q-tx6q-1020-comtft.dtb \
-	imx6q-tx6q-1110.dtb \
-	imx6sl-evk.dtb \
-	imx6sx-sdb.dtb \
-	vf610-colibri-eval-v3.dtb \
-	vf610-cosmic.dtb \
-	vf610-twr.dtb
-dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
-	imx23-olinuxino.dtb \
-	imx23-stmp378x_devb.dtb \
-	imx28-apf28.dtb \
-	imx28-apf28dev.dtb \
-	imx28-apx4devkit.dtb \
-	imx28-cfa10036.dtb \
-	imx28-cfa10037.dtb \
-	imx28-cfa10049.dtb \
-	imx28-cfa10055.dtb \
-	imx28-cfa10056.dtb \
-	imx28-cfa10057.dtb \
-	imx28-cfa10058.dtb \
-	imx28-duckbill.dtb \
-	imx28-eukrea-mbmx283lc.dtb \
-	imx28-eukrea-mbmx287lc.dtb \
-	imx28-evk.dtb \
-	imx28-m28cu3.dtb \
-	imx28-m28evk.dtb \
-	imx28-sps1.dtb \
-	imx28-tx28.dtb
-dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
-dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \
-	nspire-tp.dtb \
-	nspire-clp.dtb
-dtb-$(CONFIG_ARCH_OMAP2) += omap2420-h4.dtb \
-	omap2420-n800.dtb \
-	omap2420-n810.dtb \
-	omap2420-n810-wimax.dtb \
-	omap2430-sdp.dtb
-dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \
-	am3517-evm.dtb \
-	am3517_mt_ventoux.dtb \
-	omap3430-sdp.dtb \
-	omap3-beagle.dtb \
-	omap3-beagle-xm.dtb \
-	omap3-beagle-xm-ab.dtb \
-	omap3-cm-t3517.dtb \
-	omap3-cm-t3530.dtb \
-	omap3-cm-t3730.dtb \
-	omap3-devkit8000.dtb \
-	omap3-evm.dtb \
-	omap3-evm-37xx.dtb \
-	omap3-gta04a3.dtb \
-	omap3-gta04a4.dtb \
-	omap3-gta04a5.dtb \
-	omap3-ha.dtb \
-	omap3-ha-lcd.dtb \
-	omap3-igep0020.dtb \
-	omap3-igep0030.dtb \
-	omap3-ldp.dtb \
-	omap3-lilly-dbb056.dtb \
-	omap3-n900.dtb \
-	omap3-n9.dtb \
-	omap3-n950.dtb \
-	omap3-overo-alto35.dtb \
-	omap3-overo-chestnut43.dtb \
-	omap3-overo-gallop43.dtb \
-	omap3-overo-palo43.dtb \
-	omap3-overo-storm-alto35.dtb \
-	omap3-overo-storm-chestnut43.dtb \
-	omap3-overo-storm-gallop43.dtb \
-	omap3-overo-storm-palo43.dtb \
-	omap3-overo-storm-summit.dtb \
-	omap3-overo-storm-tobi.dtb \
-	omap3-overo-summit.dtb \
-	omap3-overo-tobi.dtb \
-	omap3-sbc-t3517.dtb \
-	omap3-sbc-t3530.dtb \
-	omap3-sbc-t3730.dtb \
-	omap3-thunder.dtb \
-	omap3-zoom3.dtb
-dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \
-	am335x-bone.dtb \
-	am335x-boneblack.dtb \
-	am335x-evm.dtb \
-	am335x-evmsk.dtb \
-	am335x-nano.dtb \
-	am335x-pepper.dtb
-dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \
-	omap4-panda.dtb \
-	omap4-panda-a4.dtb \
-	omap4-panda-es.dtb \
-	omap4-sdp.dtb \
-	omap4-sdp-es23plus.dtb \
-	omap4-var-dvk-om44.dtb \
-	omap4-var-stk-om44.dtb
-dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \
-	am437x-sk-evm.dtb \
-	am437x-gp-evm.dtb
-dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \
-	omap5-sbc-t54.dtb \
-	omap5-uevm.dtb
-dtb-$(CONFIG_SOC_DRA7XX) += dra7-evm.dtb \
-	dra72-evm.dtb
-dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
-	orion5x-lacie-ethernet-disk-mini-v2.dtb \
-	orion5x-maxtor-shared-storage-2.dtb \
-	orion5x-rd88f5182-nas.dtb
-dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
-dtb-$(CONFIG_ARCH_QCOM) += \
-	qcom-apq8064-cm-qs600.dtb \
-	qcom-apq8064-ifc6410.dtb \
-	qcom-apq8074-dragonboard.dtb \
-	qcom-apq8084-ifc6540.dtb \
-	qcom-apq8084-mtp.dtb \
-	qcom-ipq8064-ap148.dtb \
-	qcom-msm8660-surf.dtb \
-	qcom-msm8960-cdp.dtb \
-	qcom-msm8974-sony-xperia-honami.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += \
-	rk3066a-bqcurie2.dtb \
-	rk3188-radxarock.dtb \
-	rk3288-evb-act8846.dtb \
-	rk3288-evb-rk808.dtb
-dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
-dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
-	s3c6410-smdk6410.dtb
-dtb-$(CONFIG_ARCH_S5PV210) += s5pv210-aquila.dtb \
-	s5pv210-goni.dtb \
-	s5pv210-smdkc110.dtb \
-	s5pv210-smdkv210.dtb \
-	s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \
-	r8a7740-armadillo800eva.dtb \
-	r8a7778-bockw.dtb \
-	r8a7778-bockw-reference.dtb \
-	r8a7779-marzen.dtb \
-	r8a7791-koelsch.dtb \
-	r8a7790-lager.dtb \
-	sh73a0-kzm9g.dtb \
-	sh73a0-kzm9g-reference.dtb \
-	r8a73a4-ape6evm.dtb \
-	r8a73a4-ape6evm-reference.dtb \
-	sh7372-mackerel.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
-	r7s72100-genmai.dtb \
-	r8a7740-armadillo800eva.dtb \
-	r8a7791-henninger.dtb \
-	r8a7791-koelsch.dtb \
-	r8a7790-lager.dtb \
-	r8a7779-marzen.dtb \
-	r8a7794-alt.dtb
-dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
-	socfpga_cyclone5_socdk.dtb \
-	socfpga_cyclone5_sockit.dtb \
-	socfpga_cyclone5_socrates.dtb \
-	socfpga_vt.dtb
-dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
-	spear1340-evb.dtb
-dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
-	spear310-evb.dtb \
-	spear320-evb.dtb \
-	spear320-hmi.dtb
-dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
-dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
-	stih415-b2000.dtb \
-	stih415-b2020.dtb \
-	stih416-b2000.dtb \
-	stih416-b2020.dtb \
-	stih416-b2020e.dtb
-dtb-$(CONFIG_MACH_SUN4I) += \
-	sun4i-a10-a1000.dtb \
-	sun4i-a10-ba10-tvbox.dtb \
-	sun4i-a10-cubieboard.dtb \
-	sun4i-a10-mini-xplus.dtb \
-	sun4i-a10-hackberry.dtb \
-	sun4i-a10-inet97fv2.dtb \
-	sun4i-a10-olinuxino-lime.dtb \
-	sun4i-a10-pcduino.dtb
-dtb-$(CONFIG_MACH_SUN5I) += \
-	sun5i-a10s-olinuxino-micro.dtb \
-	sun5i-a10s-r7-tv-dongle.dtb \
-	sun5i-a13-hsg-h702.dtb \
-	sun5i-a13-olinuxino.dtb \
-	sun5i-a13-olinuxino-micro.dtb
-dtb-$(CONFIG_MACH_SUN6I) += \
-	sun6i-a31-app4-evb1.dtb \
-	sun6i-a31-colombus.dtb \
-	sun6i-a31-hummingbird.dtb \
-	sun6i-a31-m9.dtb
-dtb-$(CONFIG_MACH_SUN7I) += \
-	sun7i-a20-cubieboard2.dtb \
-	sun7i-a20-cubietruck.dtb \
-	sun7i-a20-hummingbird.dtb \
-	sun7i-a20-i12-tvbox.dtb \
-	sun7i-a20-olinuxino-lime.dtb \
-	sun7i-a20-olinuxino-micro.dtb \
-	sun7i-a20-pcduino3.dtb
-dtb-$(CONFIG_MACH_SUN8I) += \
-	sun8i-a23-ippo-q8h-v5.dtb
-dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
-	tegra20-iris-512.dtb \
-	tegra20-medcom-wide.dtb \
-	tegra20-paz00.dtb \
-	tegra20-plutux.dtb \
-	tegra20-seaboard.dtb \
-	tegra20-tec.dtb \
-	tegra20-trimslice.dtb \
-	tegra20-ventana.dtb \
-	tegra20-whistler.dtb \
-	tegra30-apalis-eval.dtb \
-	tegra30-beaver.dtb \
-	tegra30-cardhu-a02.dtb \
-	tegra30-cardhu-a04.dtb \
-	tegra30-colibri-eval-v3.dtb \
-	tegra114-dalmore.dtb \
-	tegra114-roth.dtb \
-	tegra114-tn7.dtb \
-	tegra124-jetson-tk1.dtb \
-	tegra124-nyan-big.dtb \
-	tegra124-venice2.dtb
-dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
-dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
-	ste-hrefprev60-stuib.dtb \
-	ste-hrefprev60-tvk.dtb \
-	ste-hrefv60plus-stuib.dtb \
-	ste-hrefv60plus-tvk.dtb \
-	ste-ccu8540.dtb \
-	ste-ccu9540.dtb
-dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
-	versatile-pb.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
-	vexpress-v2p-ca9.dtb \
-	vexpress-v2p-ca15-tc1.dtb \
-	vexpress-v2p-ca15_a7.dtb
-dtb-$(CONFIG_ARCH_VIRT) += xenvm-4.2.dtb
-dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
-	wm8505-ref.dtb \
-	wm8650-mid.dtb \
-	wm8750-apc8750.dtb \
-	wm8850-w70v2.dtb
-dtb-$(CONFIG_ARCH_ZYNQ) += \
-	zynq-parallella.dtb \
-	zynq-zc702.dtb \
-	zynq-zc706.dtb \
-	zynq-zed.dtb
-dtb-$(CONFIG_MACH_ARMADA_370) += \
-	armada-370-db.dtb \
-	armada-370-mirabox.dtb \
-	armada-370-netgear-rn102.dtb \
-	armada-370-netgear-rn104.dtb \
-	armada-370-rd.dtb
-dtb-$(CONFIG_MACH_ARMADA_375) += \
-	armada-375-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_38X) += \
-	armada-385-db.dtb \
-	armada-385-rd.dtb
-dtb-$(CONFIG_MACH_ARMADA_XP) += \
-	armada-xp-axpwifiap.dtb \
-	armada-xp-db.dtb \
-	armada-xp-gp.dtb \
-	armada-xp-lenovo-ix4-300d.dtb \
-	armada-xp-matrix.dtb \
-	armada-xp-netgear-rn2120.dtb \
-	armada-xp-openblocks-ax3-4.dtb
-dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
-	dove-cubox.dtb \
-	dove-cubox-es.dtb \
-	dove-d2plug.dtb \
-	dove-d3plug.dtb \
-	dove-dove-db.dtb
-dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb
-
-targets += dtbs dtbs_install
-targets += $(dtb-y)
-endif
-
-# *.dtb used to be generated in the directory above. Clean out the
-# old build results so people don't accidentally use them.
-dtbs: $(addprefix $(obj)/, $(dtb-y))
-	$(Q)rm -f $(obj)/../*.dtb
-
-clean-files := *.dtb
-
-dtbs_install: $(addsuffix _dtbinst_, $(dtb-y))
+# SPDX-License-Identifier: GPL-2.0
+subdir-y += actions
+subdir-y += airoha
+subdir-y += allwinner
+subdir-y += alphascale
+subdir-y += amazon
+subdir-y += amlogic
+subdir-y += arm
+subdir-y += aspeed
+subdir-y += axis
+subdir-y += broadcom
+subdir-y += calxeda
+subdir-y += cirrus
+subdir-y += cnxt
+subdir-y += gemini
+subdir-y += hisilicon
+subdir-y += hpe
+subdir-y += intel
+subdir-y += marvell
+subdir-y += mediatek
+subdir-y += microchip
+subdir-y += moxa
+subdir-y += nspire
+subdir-y += nuvoton
+subdir-y += nvidia
+subdir-y += nxp
+subdir-y += qcom
+subdir-y += realtek
+subdir-y += renesas
+subdir-y += rockchip
+subdir-y += samsung
+subdir-y += sigmastar
+subdir-y += socionext
+subdir-y += st
+subdir-y += sunplus
+subdir-y += synaptics
+subdir-y += ti
+subdir-y += unisoc
+subdir-y += vt8500
+subdir-y += xen
+subdir-y += xilinx
diff --git a/arch/arm/boot/dts/actions/Makefile b/arch/arm/boot/dts/actions/Makefile
new file mode 100644
index 000000000000..f384e4a48e6f
--- /dev/null
+++ b/arch/arm/boot/dts/actions/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ACTIONS) += \
+	owl-s500-cubieboard6.dtb \
+	owl-s500-guitar-bb-rev-b.dtb \
+	owl-s500-labrador-base-m.dtb \
+	owl-s500-roseapplepi.dtb \
+	owl-s500-sparky.dtb
diff --git a/arch/arm/boot/dts/actions/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/actions/owl-s500-cubieboard6.dts
new file mode 100644
index 000000000000..c2b02895910c
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-cubieboard6.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Cubietech CubieBoard6
+ *
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "cubietech,cubieboard6", "actions,s500";
+	model = "CubieBoard6";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/actions/owl-s500-guitar-bb-rev-b.dts
new file mode 100644
index 000000000000..7ae34a23e320
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-guitar-bb-rev-b.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "owl-s500-guitar.dtsi"
+
+/ {
+	compatible = "lemaker,guitar-bb-rev-b", "lemaker,guitar", "actions,s500";
+	model = "LeMaker Guitar Base Board rev. B";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500-guitar.dtsi b/arch/arm/boot/dts/actions/owl-s500-guitar.dtsi
new file mode 100644
index 000000000000..81cc39871f17
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-guitar.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * LeMaker Guitar SoM
+ *
+ * Copyright (c) 2016-2017 Andreas Färber
+ */
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "lemaker,guitar", "actions,s500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500-labrador-base-m.dts b/arch/arm/boot/dts/actions/owl-s500-labrador-base-m.dts
new file mode 100644
index 000000000000..1585e33f703b
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-labrador-base-m.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador Base Board
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+/dts-v1/;
+
+#include "owl-s500-labrador-v2.dtsi"
+
+/ {
+	model = "Caninos Labrador Core v2 on Labrador Base-M v1";
+	compatible = "caninos,labrador-base-m",
+		     "caninos,labrador-v2", "actions,s500";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/actions/owl-s500-labrador-v2.dtsi
new file mode 100644
index 000000000000..883ff2f9886d
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-labrador-v2.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador SoM V2
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+#include "owl-s500.dtsi"
+
+/ {
+	model = "Caninos Labrador Core V2.1";
+	compatible = "caninos,labrador-v2", "actions,s500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/actions/owl-s500-roseapplepi.dts
new file mode 100644
index 000000000000..eb555f385283
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-roseapplepi.dts
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Roseapple Pi
+ *
+ * Copyright (C) 2020-2021 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "roseapplepi,roseapplepi", "actions,s500";
+	model = "Roseapple Pi";
+
+	aliases {
+		mmc0 = &mmc0;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>; /* 2GB */
+	};
+
+	syspwr: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "SYSPWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	atc260x: pmic@65 {
+		compatible = "actions,atc2603c";
+		reg = <0x65>;
+		interrupt-parent = <&sirq>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+		reset-time-sec = <6>;
+
+		regulators {
+			compatible = "actions,atc2603c-regulator";
+
+			dcdc1-supply = <&syspwr>;
+			dcdc2-supply = <&syspwr>;
+			dcdc3-supply = <&syspwr>;
+			ldo1-supply = <&syspwr>;
+			ldo2-supply = <&syspwr>;
+			ldo3-supply = <&syspwr>;
+			ldo5-supply = <&syspwr>;
+			ldo6-supply = <&syspwr>;
+			ldo7-supply = <&syspwr>;
+			ldo8-supply = <&syspwr>;
+			ldo11-supply = <&syspwr>;
+			ldo12-supply = <&syspwr>;
+			switchldo1-supply = <&vcc>;
+
+			vdd_cpu: dcdc1 {
+				regulator-name = "VDD_CPU";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			vddq: dcdc2 {
+				regulator-name = "VDDQ";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <2150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc: dcdc3 {
+				regulator-name = "VCC";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_3v3: ldo1 {
+				regulator-name = "VCC_3V3";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			avcc: ldo2 {
+				regulator-name = "AVCC";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_1v8: ldo3 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vcc_3v1: ldo5 {
+				regulator-name = "VCC_3V1";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			avdd: ldo6 {
+				regulator-name = "AVDD";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			sens_1v8: ldo7 {
+				regulator-name = "SENS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8: ldo8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			svcc: ldo11 {
+				regulator-name = "SVCC";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			rtc_vdd: ldo12 {
+				regulator-name = "RTC_VDD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			sd_vcc: switchldo1 {
+				regulator-name = "SD_VCC";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&pinctrl {
+	i2c0_pins: i2c0-pins {
+		pinmux {
+			groups = "i2c0_mfp";
+			function = "i2c0";
+		};
+
+		pinconf {
+			pins = "i2c0_sclk", "i2c0_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pinconf {
+			pins = "i2c1_sclk", "i2c1_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pinconf {
+			pins = "i2c2_sclk", "i2c2_sdata";
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins: mmc0-pins {
+		pinmux {
+			groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
+				 "sd0_cmd_mfp", "sd0_clk_mfp";
+			function = "sd0";
+		};
+
+		drv-pinconf {
+			groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv";
+			drive-strength = <8>;
+		};
+
+		bias0-pinconf {
+			pins = "sd0_d0", "sd0_d1", "sd0_d2",
+			       "sd0_d3", "sd0_cmd";
+			bias-pull-up;
+		};
+
+		bias1-pinconf {
+			pins = "sd0_clk";
+			bias-pull-down;
+		};
+	};
+
+	ethernet_pins: ethernet-pins {
+		eth_rmii-pinmux {
+			groups = "rmii_txd0_mfp", "rmii_txd1_mfp",
+				 "rmii_rxd0_mfp", "rmii_rxd1_mfp",
+				 "rmii_txen_mfp", "rmii_rxen_mfp",
+				 "rmii_crs_dv_mfp", "rmii_ref_clk_mfp";
+			function = "eth_rmii";
+		};
+
+		phy_clk-pinmux {
+			groups = "clko_25m_mfp";
+			function = "clko_25m";
+		};
+
+		ref_clk-pinconf {
+			groups = "rmii_ref_clk_drv";
+			drive-strength = <2>;
+		};
+
+	};
+};
+
+/* uSD */
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	no-sdio;
+	no-mmc;
+	no-1-8-v;
+	cd-gpios = <&pinctrl 117 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&sd_vcc>;
+	vqmmc-supply = <&sd_vcc>;
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	phy-mode = "rmii";
+	phy-handle = <&eth_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&pinctrl 88 GPIO_ACTIVE_LOW>; /* GPIOC24 */
+		reset-delay-us = <10000>;
+		reset-post-delay-us = <150000>;
+
+		eth_phy: ethernet-phy@3 {
+			reg = <0x3>;
+			max-speed = <100>;
+			interrupt-parent = <&sirq>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&twd_timer {
+	status = "okay";
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500-sparky.dts b/arch/arm/boot/dts/actions/owl-s500-sparky.dts
new file mode 100644
index 000000000000..9d8f7336bec0
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-sparky.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Allo.com Sparky
+ *
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "allo,sparky", "actions,s500";
+	model = "Allo.com Sparky";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1 or 2 GiB */
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500.dtsi b/arch/arm/boot/dts/actions/owl-s500.dtsi
new file mode 100644
index 000000000000..739b4b9cec8c
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500.dtsi
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Actions Semi S500 SoC
+ *
+ * Copyright (c) 2016-2017 Andreas Färber
+ */
+
+#include <dt-bindings/clock/actions,s500-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/owl-s500-powergate.h>
+#include <dt-bindings/reset/actions,s500-reset.h>
+
+/ {
+	compatible = "actions,s500";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+	};
+
+	chosen {
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x0>;
+			enable-method = "actions,s500-smp";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x1>;
+			enable-method = "actions,s500-smp";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x2>;
+			enable-method = "actions,s500-smp";
+			power-domains = <&sps S500_PD_CPU2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x3>;
+			enable-method = "actions,s500-smp";
+			power-domains = <&sps S500_PD_CPU3>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	losc: losc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		scu: scu@b0020000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xb0020000 0x100>;
+		};
+
+		global_timer: timer@b0020200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0xb0020200 0x100>;
+			interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		twd_timer: timer@b0020600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xb0020600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		twd_wdt: wdt@b0020620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0xb0020620 0xe0>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@b0021000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xb0021000 0x1000>,
+			      <0xb0020100 0x0100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		l2: cache-controller@b0022000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xb0022000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			arm,tag-latency = <3 3 2>;
+			arm,data-latency = <5 3 3>;
+		};
+
+		uart0: serial@b0120000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0120000 0x2000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@b0122000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0122000 0x2000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@b0124000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0124000 0x2000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@b0126000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0126000 0x2000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@b0128000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0128000 0x2000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@b012a000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb012a000 0x2000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@b012c000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb012c000 0x2000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART6>;
+			status = "disabled";
+		};
+
+		cmu: clock-controller@b0160000 {
+			compatible = "actions,s500-cmu";
+			reg = <0xb0160000 0x8000>;
+			clocks = <&hosc>, <&losc>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c@b0170000 {
+			compatible = "actions,s500-i2c";
+			reg = <0xb0170000 0x4000>;
+			clocks = <&cmu CLK_I2C0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@b0174000 {
+			compatible = "actions,s500-i2c";
+			reg = <0xb0174000 0x4000>;
+			clocks = <&cmu CLK_I2C1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@b0178000 {
+			compatible = "actions,s500-i2c";
+			reg = <0xb0178000 0x4000>;
+			clocks = <&cmu CLK_I2C2>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@b017c000 {
+			compatible = "actions,s500-i2c";
+			reg = <0xb017c000 0x4000>;
+			clocks = <&cmu CLK_I2C3>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sirq: interrupt-controller@b01b0200 {
+			compatible = "actions,s500-sirq";
+			reg = <0xb01b0200 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ0 */
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ1 */
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; /* SIRQ2 */
+		};
+
+		timer: timer@b0168000 {
+			compatible = "actions,s500-timer";
+			reg = <0xb0168000 0x8000>;
+			interrupts = <GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "2hz0", "2hz1", "timer0", "timer1";
+		};
+
+		sps: power-controller@b01b0100 {
+			compatible = "actions,s500-sps";
+			reg = <0xb01b0100 0x100>;
+			#power-domain-cells = <1>;
+		};
+
+		pinctrl: pinctrl@b01b0000 {
+			compatible = "actions,s500-pinctrl";
+			reg = <0xb01b0000 0x40>, /* GPIO */
+			      <0xb01b0040 0x10>, /* Multiplexing Control */
+			      <0xb01b0060 0x18>, /* PAD Control */
+			      <0xb01b0080 0xc>;  /* PAD Drive Capacity */
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 132>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* GPIOA */
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* GPIOB */
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* GPIOC */
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, /* GPIOD */
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; /* GPIOE */
+		};
+
+		dma: dma-controller@b0260000 {
+			compatible = "actions,s500-dma";
+			reg = <0xb0260000 0xd00>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <12>;
+			dma-requests = <46>;
+			clocks = <&cmu CLK_DMAC>;
+			power-domains = <&sps S500_PD_DMA>;
+		};
+
+		mmc0: mmc@b0230000 {
+			compatible = "actions,s500-mmc", "actions,owl-mmc";
+			reg = <0xb0230000 0x38>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD0>;
+			resets = <&cmu RESET_SD0>;
+			dmas = <&dma 2>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc1: mmc@b0234000 {
+			compatible = "actions,s500-mmc", "actions,owl-mmc";
+			reg = <0xb0234000 0x38>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD1>;
+			resets = <&cmu RESET_SD1>;
+			dmas = <&dma 3>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc2: mmc@b0238000 {
+			compatible = "actions,s500-mmc", "actions,owl-mmc";
+			reg = <0xb0238000 0x38>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD2>;
+			resets = <&cmu RESET_SD2>;
+			dmas = <&dma 4>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		ethernet: ethernet@b0310000 {
+			compatible = "actions,s500-emac", "actions,owl-emac";
+			reg = <0xb0310000 0x10000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_ETHERNET>, <&cmu CLK_RMII_REF>;
+			clock-names = "eth", "rmii";
+			resets = <&cmu RESET_ETHERNET>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/airoha/Makefile b/arch/arm/boot/dts/airoha/Makefile
new file mode 100644
index 000000000000..00c31389f622
--- /dev/null
+++ b/arch/arm/boot/dts/airoha/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_AIROHA) += \
+	en7523-evb.dtb
diff --git a/arch/arm/boot/dts/airoha/en7523-evb.dts b/arch/arm/boot/dts/airoha/en7523-evb.dts
new file mode 100644
index 000000000000..f23a25cce119
--- /dev/null
+++ b/arch/arm/boot/dts/airoha/en7523-evb.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7523.dtsi"
+
+/ {
+	model = "Airoha EN7523 Evaluation Board";
+	compatible = "airoha,en7523-evb", "airoha,en7523";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+		stdout-path = "serial0:115200n8";
+		linux,usable-memory-range = <0x80200000 0x1fe00000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/airoha/en7523.dtsi b/arch/arm/boot/dts/airoha/en7523.dtsi
new file mode 100644
index 000000000000..b523a868c4ad
--- /dev/null
+++ b/arch/arm/boot/dts/airoha/en7523.dtsi
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/en7523-clk.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		npu_binary@84000000 {
+			no-map;
+			reg = <0x84000000 0xA00000>;
+		};
+
+		npu_flag@84B0000 {
+			no-map;
+			reg = <0x84B00000 0x100000>;
+		};
+
+		npu_pkt@85000000 {
+			no-map;
+			reg = <0x85000000 0x1A00000>;
+		};
+
+		npu_phyaddr@86B00000 {
+			no-map;
+			reg = <0x86B00000 0x100000>;
+		};
+
+		npu_rxdesc@86D00000 {
+			no-map;
+			reg = <0x86D00000 0x100000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	scu: system-controller@1fa20000 {
+		compatible = "airoha,en7523-scu";
+		reg = <0x1fa20000 0x400>,
+		      <0x1fb00000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@9000000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x09000000 0x20000>,
+		      <0x09080000 0x80000>,
+		      <0x09400000 0x2000>,
+		      <0x09500000 0x2000>,
+		      <0x09600000 0x20000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	uart1: serial@1fbf0000 {
+		compatible = "ns16550";
+		reg = <0x1fbf0000 0x30>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <1843200>;
+		status = "okay";
+	};
+
+	gpio0: gpio@1fbf0200 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0204 0x4>,
+		      <0x1fbf0200 0x4>,
+		      <0x1fbf0220 0x4>,
+		      <0x1fbf0214 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio1: gpio@1fbf0270 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0270 0x4>,
+		      <0x1fbf0260 0x4>,
+		      <0x1fbf0264 0x4>,
+		      <0x1fbf0278 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pcie0: pcie@1fa91000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa91000 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000  0x20000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie1: pcie@1fa92000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa92000 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck1";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x28000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts
deleted file mode 100644
index d9c50fbb49d2..000000000000
--- a/arch/arm/boot/dts/aks-cdu.dts
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * aks-cdu.dts - Device Tree file for AK signal CDU
- *
- * Copyright (C) 2012 AK signal Brno a.s.
- *               2012 Jiri Prchal <jiri.prchal@aksignal.cz>
- *
- * Licensed under GPLv2 or later.
- */
-
-/dts-v1/;
-
-#include "ge863-pro3.dtsi"
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs";
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-	};
-
-	ahb {
-		apb {
-			usart0: serial@fffb0000 {
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				status = "okay";
-				linux,rs485-enabled-at-boot-time;
-				rs485-rts-delay = <0 0>;
-				};
-
-			usart2: serial@fffb8000 {
-				status = "okay";
-				linux,rs485-enabled-at-boot-time;
-				rs485-rts-delay = <0 0>;
-			};
-
-			usart3: serial@fffd0000 {
-				status = "okay";
-				linux,rs485-enabled-at-boot-time;
-				rs485-rts-delay = <0 0>;
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@00500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			status = "okay";
-
-			bootstrap@0 {
-				label = "bootstrap";
-				reg = <0x0 0x40000>;
-			};
-
-			uboot@40000 {
-				label = "uboot";
-				reg = <0x40000 0x80000>;
-			};
-			ubootenv@c0000 {
-				label = "ubootenv";
-				reg = <0xc0000 0x40000>;
-			};
-			kernel@100000 {
-				label = "kernel";
-				reg = <0x100000 0x400000>;
-			};
-			rootfs@500000 {
-				label = "rootfs";
-				reg = <0x500000 0x7b00000>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		red {
-			gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
-		};
-
-		green {
-			gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-			default-state = "on";
-		};
-
-		yellow {
-			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		blue {
-			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile
new file mode 100644
index 000000000000..f71392a55df8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/Makefile
@@ -0,0 +1,283 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_SUN4I) += \
+	sun4i-a10-a1000.dtb \
+	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
+	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-dserve-dsrv9703c.dtb \
+	sun4i-a10-gemei-g9.dtb \
+	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
+	sun4i-a10-itead-iteaduino-plus.dtb \
+	sun4i-a10-jesurun-q5.dtb \
+	sun4i-a10-marsboard.dtb \
+	sun4i-a10-mini-xplus.dtb \
+	sun4i-a10-mk802.dtb \
+	sun4i-a10-mk802ii.dtb \
+	sun4i-a10-olinuxino-lime.dtb \
+	sun4i-a10-pcduino.dtb \
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb \
+	sun4i-a10-topwise-a721.dtb
+dtb-$(CONFIG_MACH_SUN4I) += \
+	sun4i-a10-a1000.dtb \
+	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
+	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-dserve-dsrv9703c.dtb \
+	sun4i-a10-gemei-g9.dtb \
+	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
+	sun4i-a10-itead-iteaduino-plus.dtb \
+	sun4i-a10-jesurun-q5.dtb \
+	sun4i-a10-marsboard.dtb \
+	sun4i-a10-mini-xplus.dtb \
+	sun4i-a10-mk802.dtb \
+	sun4i-a10-mk802ii.dtb \
+	sun4i-a10-olinuxino-lime.dtb \
+	sun4i-a10-pcduino.dtb \
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb \
+	sun4i-a10-topwise-a721.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t003.dtb \
+	sun5i-a10s-auxtek-t004.dtb \
+	sun5i-a10s-mk802.dtb \
+	sun5i-a10s-olinuxino-micro.dtb \
+	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
+	sun5i-a13-difrnce-dit4350.dtb \
+	sun5i-a13-empire-electronix-d709.dtb \
+	sun5i-a13-empire-electronix-m712.dtb \
+	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
+	sun5i-a13-licheepi-one.dtb \
+	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-pocketbook-touch-lux-3.dtb \
+	sun5i-a13-pocketbook-614-plus.dtb \
+	sun5i-a13-q8-tablet.dtb \
+	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-chip-pro.dtb \
+	sun5i-gr8-evb.dtb \
+	sun5i-r8-chip.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t003.dtb \
+	sun5i-a10s-auxtek-t004.dtb \
+	sun5i-a10s-mk802.dtb \
+	sun5i-a10s-olinuxino-micro.dtb \
+	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
+	sun5i-a13-difrnce-dit4350.dtb \
+	sun5i-a13-empire-electronix-d709.dtb \
+	sun5i-a13-empire-electronix-m712.dtb \
+	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
+	sun5i-a13-licheepi-one.dtb \
+	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-pocketbook-touch-lux-3.dtb \
+	sun5i-a13-q8-tablet.dtb \
+	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-chip-pro.dtb \
+	sun5i-gr8-evb.dtb \
+	sun5i-r8-chip.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-app4-evb1.dtb \
+	sun6i-a31-colombus.dtb \
+	sun6i-a31-hummingbird.dtb \
+	sun6i-a31-i7.dtb \
+	sun6i-a31-m9.dtb \
+	sun6i-a31-mele-a1000g-quad.dtb \
+	sun6i-a31s-colorfly-e708-q1.dtb \
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
+	sun6i-a31s-sinovoip-bpi-m2.dtb \
+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-app4-evb1.dtb \
+	sun6i-a31-colombus.dtb \
+	sun6i-a31-hummingbird.dtb \
+	sun6i-a31-i7.dtb \
+	sun6i-a31-m9.dtb \
+	sun6i-a31-mele-a1000g-quad.dtb \
+	sun6i-a31s-colorfly-e708-q1.dtb \
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
+	sun6i-a31s-sinovoip-bpi-m2.dtb \
+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
+	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapi-m1-plus.dtb \
+	sun7i-a20-bananapro.dtb \
+	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-haoyu-marsboard.dtb \
+	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-itead-ibox.dtb \
+	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-icnova-a20-adb4006.dtb \
+	sun7i-a20-icnova-swac.dtb \
+	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
+	sun7i-a20-m3.dtb \
+	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som-evb-emmc.dtb \
+	sun7i-a20-olimex-som204-evb.dtb \
+	sun7i-a20-olimex-som204-evb-emmc.dtb \
+	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime-emmc.dtb \
+	sun7i-a20-olinuxino-lime2.dtb \
+	sun7i-a20-olinuxino-lime2-emmc.dtb \
+	sun7i-a20-olinuxino-micro.dtb \
+	sun7i-a20-olinuxino-micro-emmc.dtb \
+	sun7i-a20-orangepi.dtb \
+	sun7i-a20-orangepi-mini.dtb \
+	sun7i-a20-pcduino3.dtb \
+	sun7i-a20-pcduino3-nano.dtb \
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
+	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapi-m1-plus.dtb \
+	sun7i-a20-bananapro.dtb \
+	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-haoyu-marsboard.dtb \
+	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-itead-ibox.dtb \
+	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-icnova-a20-adb4006.dtb \
+	sun7i-a20-icnova-swac.dtb \
+	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
+	sun7i-a20-m3.dtb \
+	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som-evb-emmc.dtb \
+	sun7i-a20-olimex-som204-evb.dtb \
+	sun7i-a20-olimex-som204-evb-emmc.dtb \
+	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime-emmc.dtb \
+	sun7i-a20-olinuxino-lime2.dtb \
+	sun7i-a20-olinuxino-lime2-emmc.dtb \
+	sun7i-a20-olinuxino-micro.dtb \
+	sun7i-a20-olinuxino-micro-emmc.dtb \
+	sun7i-a20-orangepi.dtb \
+	sun7i-a20-orangepi-mini.dtb \
+	sun7i-a20-pcduino3.dtb \
+	sun7i-a20-pcduino3-nano.dtb \
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb
+
+# Enables support for device-tree overlays for all pis
+DTC_FLAGS_sun8i-h2-plus-orangepi-zero := -@
+DTC_FLAGS_sun8i-h3-orangepi-lite := -@
+DTC_FLAGS_sun8i-h3-bananapi-m2-plus := -@
+DTC_FLAGS_sun8i-h3-nanopi-m1-plus := -@
+DTC_FLAGS_sun8i-h3-nanopi-m1 := -@
+DTC_FLAGS_sun8i-h3-nanopi-duo2 := -@
+DTC_FLAGS_sun8i-h3-orangepi-plus2e := -@
+DTC_FLAGS_sun8i-h3-orangepi-one := -@
+DTC_FLAGS_sun8i-h3-orangepi-plus := -@
+DTC_FLAGS_sun8i-h3-orangepi-2 := -@
+DTC_FLAGS_sun8i-h3-orangepi-zero-plus2 := -@
+DTC_FLAGS_sun8i-h3-nanopi-neo-air := -@
+DTC_FLAGS_sun8i-h3-zeropi := -@
+DTC_FLAGS_sun8i-h3-nanopi-neo := -@
+DTC_FLAGS_sun8i-h3-nanopi-r1 := -@
+DTC_FLAGS_sun8i-h3-orangepi-pc := -@
+DTC_FLAGS_sun8i-h3-bananapi-m2-plus-v1.2 := -@
+DTC_FLAGS_sun8i-h3-orangepi-pc-plus := -@
+DTC_FLAGS_sun8i-t113s-netcube-nagami-basic-carrier := -@
+DTC_FLAGS_sun8i-v3s-netcube-kumquat := -@
+dtb-$(CONFIG_MACH_SUN8I) += \
+	sun8i-a23-evb.dtb \
+	sun8i-a23-gt90h-v4.dtb \
+	sun8i-a23-inet86dz.dtb \
+	sun8i-a23-ippo-q8h-v5.dtb \
+	sun8i-a23-ippo-q8h-v1.2.dtb \
+	sun8i-a23-polaroid-mid2407pxe03.dtb \
+	sun8i-a23-polaroid-mid2809pxe04.dtb \
+	sun8i-a23-q8-tablet.dtb \
+	sun8i-a33-et-q8-v1.6.dtb \
+	sun8i-a33-ga10h-v1.1.dtb \
+	sun8i-a33-inet-d978-rev2.dtb \
+	sun8i-a33-ippo-q8h-v1.2.dtb \
+	sun8i-a33-olinuxino.dtb \
+	sun8i-a33-q8-tablet.dtb \
+	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-a33-vstar.dtb \
+	sun8i-a83t-allwinner-h8homlet-v2.dtb \
+	sun8i-a83t-bananapi-m3.dtb \
+	sun8i-a83t-cubietruck-plus.dtb \
+	sun8i-a83t-tbs-a711.dtb \
+	sun8i-h2-plus-bananapi-m2-zero.dtb \
+	sun8i-h2-plus-libretech-all-h3-cc.dtb \
+	sun8i-h2-plus-orangepi-r1.dtb \
+	sun8i-h2-plus-orangepi-zero.dtb \
+	sun8i-h2-plus-orangepi-zero-interface-board.dtb \
+	sun8i-h3-bananapi-m2-plus.dtb \
+	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
+	sun8i-h3-beelink-x2.dtb \
+	sun8i-h3-libretech-all-h3-cc.dtb \
+	sun8i-h3-mapleboard-mp130.dtb \
+	sun8i-h3-nanopi-duo2.dtb \
+	sun8i-h3-nanopi-m1.dtb \
+	sun8i-h3-nanopi-m1-plus.dtb \
+	sun8i-h3-nanopi-neo.dtb \
+	sun8i-h3-nanopi-neo-air.dtb \
+	sun8i-h3-nanopi-r1.dtb \
+	sun8i-h3-orangepi-2.dtb \
+	sun8i-h3-orangepi-lite.dtb \
+	sun8i-h3-orangepi-one.dtb \
+	sun8i-h3-orangepi-pc.dtb \
+	sun8i-h3-orangepi-pc-plus.dtb \
+	sun8i-h3-orangepi-plus.dtb \
+	sun8i-h3-orangepi-plus2e.dtb \
+	sun8i-h3-orangepi-zero-plus2.dtb \
+	sun8i-h3-orangepi-zero-plus2-interface-board.dtb \
+	sun8i-h3-rervision-dvk.dtb \
+	sun8i-h3-zeropi.dtb \
+	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
+	sun8i-r16-bananapi-m2m.dtb \
+	sun8i-r16-nintendo-nes-classic.dtb \
+	sun8i-r16-nintendo-super-nes-classic.dtb \
+	sun8i-r16-parrot.dtb \
+	sun8i-r40-bananapi-m2-ultra.dtb \
+	sun8i-r40-oka40i-c.dtb \
+	sun8i-s3-elimo-initium.dtb \
+	sun8i-s3-lichee-zero-plus.dtb \
+	sun8i-s3-pinecube.dtb \
+	sun8i-t113s-mangopi-mq-r-t113.dtb \
+	sun8i-t113s-netcube-nagami-basic-carrier.dtb \
+	sun8i-t113s-netcube-nagami-keypad-carrier.dtb \
+	sun8i-t3-cqa3t-bv3.dtb \
+	sun8i-v3-sl631-imx179.dtb \
+	sun8i-v3s-anbernic-rg-nano.dtb \
+	sun8i-v3s-licheepi-zero.dtb \
+	sun8i-v3s-licheepi-zero-dock.dtb \
+	sun8i-v3s-netcube-kumquat.dtb \
+	sun8i-v40-bananapi-m2-berry.dtb
+sun8i-h2-plus-orangepi-zero-interface-board-dtbs += \
+	sun8i-h2-plus-orangepi-zero.dtb sun8i-orangepi-zero-interface-board.dtbo
+sun8i-h3-orangepi-zero-plus2-interface-board-dtbs += \
+	sun8i-h3-orangepi-zero-plus2.dtb sun8i-orangepi-zero-interface-board.dtbo
+dtb-$(CONFIG_MACH_SUN9I) += \
+	sun9i-a80-optimus.dtb \
+	sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_MACH_SUNIV) += \
+	suniv-f1c100s-licheepi-nano.dtb \
+	suniv-f1c200s-lctech-pi.dtb \
+	suniv-f1c200s-popstick-v1.1.dtb
diff --git a/arch/arm/boot/dts/allwinner/axp152.dtsi b/arch/arm/boot/dts/allwinner/axp152.dtsi
new file mode 100644
index 000000000000..f90ad6c64a07
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/axp152.dtsi
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&axp152 {
+	compatible = "x-powers,axp152";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};
diff --git a/arch/arm/boot/dts/allwinner/axp209.dtsi b/arch/arm/boot/dts/allwinner/axp209.dtsi
new file mode 100644
index 000000000000..469d0f7d5185
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/axp209.dtsi
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP202/209 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP20X.php
+ * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
+ */
+
+/ {
+	pmic-temp {
+		compatible = "iio-hwmon";
+		io-channels = <&axp_adc 4>; /* Internal temperature */
+	};
+};
+
+&axp209 {
+	compatible = "x-powers,axp209";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	ac_power_supply: ac-power {
+		compatible = "x-powers,axp202-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp209-adc";
+		#io-channel-cells = <1>;
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp209-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	battery_power_supply: battery-power {
+		compatible = "x-powers,axp209-battery-power-supply";
+		status = "disabled";
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <1500>;
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_ldo1: ldo1 {
+			/* LDO1 is a fixed output regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-name = "ldo1";
+		};
+
+		reg_ldo2: ldo2 {
+			regulator-name = "ldo2";
+		};
+
+		reg_ldo3: ldo3 {
+			regulator-name = "ldo3";
+		};
+
+		reg_ldo4: ldo4 {
+			regulator-name = "ldo4";
+		};
+
+		reg_ldo5: ldo5 {
+			regulator-name = "ldo5";
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb-power {
+		compatible = "x-powers,axp202-usb-power-supply";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/axp223.dtsi b/arch/arm/boot/dts/allwinner/axp223.dtsi
new file mode 100644
index 000000000000..b91b6c1278c7
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/axp223.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2016 Free Electrons
+ *
+ * Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP223 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP22X.php
+ * http://dl.linux-sunxi.org/AXP/AXP223-en.pdf
+ *
+ * The AXP223 shares most of its logic with the AXP221 but it has some
+ * differences, for the VBUS driver for example.
+ */
+
+#include "axp22x.dtsi"
+
+&usb_power_supply {
+	compatible = "x-powers,axp223-usb-power-supply";
+};
diff --git a/arch/arm/boot/dts/allwinner/axp22x.dtsi b/arch/arm/boot/dts/allwinner/axp22x.dtsi
new file mode 100644
index 000000000000..f79650afd0a7
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/axp22x.dtsi
@@ -0,0 +1,176 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP221/221s/223 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP22X.php
+ * http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf
+ */
+
+&axp22x {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	ac_power_supply: ac-power {
+		compatible = "x-powers,axp221-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp221-adc";
+		#io-channel-cells = <1>;
+	};
+
+	battery_power_supply: battery-power {
+		compatible = "x-powers,axp221-battery-power-supply";
+		status = "disabled";
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_dcdc1: dcdc1 {
+			regulator-name = "dcdc1";
+		};
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_dcdc4: dcdc4 {
+			regulator-name = "dcdc4";
+		};
+
+		reg_dcdc5: dcdc5 {
+			regulator-name = "dcdc5";
+		};
+
+		reg_dc1sw: dc1sw {
+			regulator-name = "dc1sw";
+		};
+
+		reg_dc5ldo: dc5ldo {
+			regulator-name = "dc5ldo";
+		};
+
+		reg_aldo1: aldo1 {
+			regulator-name = "aldo1";
+		};
+
+		reg_aldo2: aldo2 {
+			regulator-name = "aldo2";
+		};
+
+		reg_aldo3: aldo3 {
+			regulator-name = "aldo3";
+		};
+
+		reg_dldo1: dldo1 {
+			regulator-name = "dldo1";
+		};
+
+		reg_dldo2: dldo2 {
+			regulator-name = "dldo2";
+		};
+
+		reg_dldo3: dldo3 {
+			regulator-name = "dldo3";
+		};
+
+		reg_dldo4: dldo4 {
+			regulator-name = "dldo4";
+		};
+
+		reg_eldo1: eldo1 {
+			regulator-name = "eldo1";
+		};
+
+		reg_eldo2: eldo2 {
+			regulator-name = "eldo2";
+		};
+
+		reg_eldo3: eldo3 {
+			regulator-name = "eldo3";
+		};
+
+		reg_ldo_io0: ldo_io0 {
+			regulator-name = "ldo_io0";
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo_io1 {
+			regulator-name = "ldo_io1";
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc_ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-name = "rtc_ldo";
+		};
+
+		reg_drivevbus: drivevbus {
+			regulator-name = "drivevbus";
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb-power {
+		compatible = "x-powers,axp221-usb-power-supply";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/axp809.dtsi b/arch/arm/boot/dts/allwinner/axp809.dtsi
new file mode 100644
index 000000000000..d134d4c00bd8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/axp809.dtsi
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP809 Integrated Power Management Chip
+ */
+
+&axp809 {
+	compatible = "x-powers,axp809";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp809-gpio",
+			     "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/axp81x.dtsi b/arch/arm/boot/dts/allwinner/axp81x.dtsi
new file mode 100644
index 000000000000..ebaf1c3ce8db
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/axp81x.dtsi
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* AXP813/818 Integrated Power Management Chip */
+
+&axp81x {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	ac_power_supply: ac-power {
+		compatible = "x-powers,axp813-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp813-adc";
+		#io-channel-cells = <1>;
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp813-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	battery_power_supply: battery-power {
+		compatible = "x-powers,axp813-battery-power-supply";
+		status = "disabled";
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_dcdc1: dcdc1 {
+		};
+
+		reg_dcdc2: dcdc2 {
+		};
+
+		reg_dcdc3: dcdc3 {
+		};
+
+		reg_dcdc4: dcdc4 {
+		};
+
+		reg_dcdc5: dcdc5 {
+		};
+
+		reg_dcdc6: dcdc6 {
+		};
+
+		reg_dcdc7: dcdc7 {
+		};
+
+		reg_aldo1: aldo1 {
+		};
+
+		reg_aldo2: aldo2 {
+		};
+
+		reg_aldo3: aldo3 {
+		};
+
+		reg_dldo1: dldo1 {
+		};
+
+		reg_dldo2: dldo2 {
+		};
+
+		reg_dldo3: dldo3 {
+		};
+
+		reg_dldo4: dldo4 {
+		};
+
+		reg_eldo1: eldo1 {
+		};
+
+		reg_eldo2: eldo2 {
+		};
+
+		reg_eldo3: eldo3 {
+		};
+
+		reg_fldo1: fldo1 {
+		};
+
+		reg_fldo2: fldo2 {
+		};
+
+		reg_fldo3: fldo3 {
+		};
+
+		reg_ldo_io0: ldo-io0 {
+			/* Disable by default to avoid conflicts with GPIO */
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo-io1 {
+			/* Disable by default to avoid conflicts with GPIO */
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc-ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		reg_sw: sw {
+		};
+
+		reg_drivevbus: drivevbus {
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb-power {
+		compatible = "x-powers,axp813-usb-power-supply";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-a1000.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-a1000.dts
new file mode 100644
index 000000000000..20f9ed244851
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-a1000.dts
@@ -0,0 +1,255 @@
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Mele A1000";
+	compatible = "mele,a1000", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "a1000:red:usr";
+			gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "a1000:blue:pwr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-ba10-tvbox.dts
new file mode 100644
index 000000000000..816d534ac093
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-ba10-tvbox.dts
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "BA10 tvbox";
+	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-chuwi-v7-cw0825.dts
new file mode 100644
index 000000000000..74262988881c
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-chuwi-v7-cw0825.dts
@@ -0,0 +1,159 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Chuwi V7 CW0825";
+	compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5306de4: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-800 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-1000 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-cubieboard.dts
new file mode 100644
index 000000000000..0645d6064235
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-cubieboard.dts
@@ -0,0 +1,255 @@
+/*
+ * Copyright 2012 Stefan Roese
+ * Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cubietech Cubieboard";
+	compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubieboard>;
+
+		led-0 {
+			label = "cubieboard:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */
+		};
+
+		led-1 {
+			label = "cubieboard:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_cubieboard: led-pins {
+		pins = "PH20", "PH21";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
new file mode 100644
index 000000000000..63e77c05bfda
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
@@ -0,0 +1,218 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Dserve DSRV9703C";
+	compatible = "dserve,dsrv9703c", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	haptics {
+		compatible = "regulator-haptic";
+		haptic-supply = <&reg_motor>;
+		min-microvolt = <3000000>;
+		max-microvolt = <3000000>;
+	};
+
+	reg_motor: reg-motor {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-motor";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	/* pull-ups and devices require AXP209 LDO3 */
+	status = "failed";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button-800 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts
new file mode 100644
index 000000000000..ea7a59dcf8f9
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts
@@ -0,0 +1,192 @@
+/*
+ * Copyright 2015 Priit Laes
+ *
+ * Priit Laes <plaes@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Gemei G9 Tablet";
+	compatible = "gemei,g9", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/*
+ * TODO:
+ *   2x cameras via CSI
+ *   AXP battery management
+ *   NAND
+ *   OTG
+ *   Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
+ */
+&codec {
+	/* PH15 controls power to external amplifier (ft2012q) */
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+
+	status = "okay";
+
+	button-158 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button-349 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+
+	button-1142 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1142856>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+
+&uart0  {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-hackberry.dts
new file mode 100644
index 000000000000..47dea0922501
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-hackberry.dts
@@ -0,0 +1,140 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Miniand Hackberry";
+	compatible = "miniand,hackberry", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy0>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-hyundai-a7hd.dts
new file mode 100644
index 000000000000..bf2044bac42f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-hyundai-a7hd.dts
@@ -0,0 +1,115 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Hyundai A7HD";
+	compatible = "hyundai,a7hd", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts
new file mode 100644
index 000000000000..60e432a0ef1c
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts
@@ -0,0 +1,229 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "iNet-1";
+	compatible = "inet-tek,inet1", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0  {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5x: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
+		touchscreen-size-x = <600>;
+		touchscreen-size-y = <1024>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-1000 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0  {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet97fv2.dts
new file mode 100644
index 000000000000..76016f2ca29d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet97fv2.dts
@@ -0,0 +1,203 @@
+/*
+ * Copyright 2014 Open Source Support GmbH
+ *
+ * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "INet-97F Rev 02";
+	compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-600 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet9f-rev03.dts
new file mode 100644
index 000000000000..62e7aa587f89
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet9f-rev03.dts
@@ -0,0 +1,357 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "iNet-9F Rev 03";
+	compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		event-left-joystick-left {
+			label = "Left Joystick Left";
+			linux,code = <ABS_X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */
+		};
+
+		event-left-joystick-right {
+			label = "Left Joystick Right";
+			linux,code = <ABS_X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */
+		};
+
+		event-left-joystick-up {
+			label = "Left Joystick Up";
+			linux,code = <ABS_Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */
+		};
+
+		event-left-joystick-down {
+			label = "Left Joystick Down";
+			linux,code = <ABS_Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */
+		};
+
+		event-right-joystick-left {
+			label = "Right Joystick Left";
+			linux,code = <ABS_Z>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */
+		};
+
+		event-right-joystick-right {
+			label = "Right Joystick Right";
+			linux,code = <ABS_Z>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */
+		};
+
+		event-right-joystick-up {
+			label = "Right Joystick Up";
+			linux,code = <ABS_RZ>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */
+		};
+
+		event-right-joystick-down {
+			label = "Right Joystick Down";
+			linux,code = <ABS_RZ>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */
+		};
+
+		event-dpad-left {
+			label = "DPad Left";
+			linux,code = <ABS_HAT0X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */
+		};
+
+		event-dpad-right {
+			label = "DPad Right";
+			linux,code = <ABS_HAT0X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */
+		};
+
+		event-dpad-up {
+			label = "DPad Up";
+			linux,code = <ABS_HAT0Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */
+		};
+
+		event-dpad-down {
+			label = "DPad Down";
+			linux,code = <ABS_HAT0Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */
+		};
+
+		event-x {
+			label = "Button X";
+			linux,code = <BTN_X>;
+			gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */
+		};
+
+		event-y {
+			label = "Button Y";
+			linux,code = <BTN_Y>;
+			gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */
+		};
+
+		event-a {
+			label = "Button A";
+			linux,code = <BTN_A>;
+			gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */
+		};
+
+		event-b {
+			label = "Button B";
+			linux,code = <BTN_B>;
+			gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */
+		};
+
+		event-select {
+			label = "Select Button";
+			linux,code = <BTN_SELECT>;
+			gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */
+		};
+
+		event-start {
+			label = "Start Button";
+			linux,code = <BTN_START>;
+			gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */
+		};
+
+		event-top-left {
+			label = "Top Left Button";
+			linux,code = <BTN_TL>;
+			gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */
+		};
+
+		event-top-right {
+			label = "Top Right Button";
+			linux,code = <BTN_TR>;
+			gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-600 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-itead-iteaduino-plus.dts
new file mode 100644
index 000000000000..d4e319d16aae
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-itead-iteaduino-plus.dts
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2015 Josef Gajdusek <atx@atx.name>
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-itead-core-common.dtsi"
+
+/ {
+	model = "Iteaduino Plus A10";
+	compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10";
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins>;
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	axp209: pmic@34 {
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-jesurun-q5.dts
new file mode 100644
index 000000000000..1aeb0bd5519e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-jesurun-q5.dts
@@ -0,0 +1,181 @@
+/*
+ * Copyright 2015 Gábor Nyers
+ *
+ * Gábor Nyers <gabor.nyers@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Jesurun Q5";
+	compatible = "jesurun,q5", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "q5:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;  /* PH20 */
+		};
+
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;   /* PH19 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-marsboard.dts
new file mode 100644
index 000000000000..81fdb217d339
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-marsboard.dts
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2015 Aleksei Mamlin
+ * Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "HAOYU Electronics Marsboard A10";
+	compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "marsboard:red1:usr";
+			gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "marsboard:red2:usr";
+			gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "marsboard:red3:usr";
+			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "marsboard:red4:usr";
+			gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mini-xplus.dts
new file mode 100644
index 000000000000..f9d74e21031d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mini-xplus.dts
@@ -0,0 +1,144 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "PineRiver Mini X-Plus";
+	compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&ir0_rx_pins {
+	/* The ir receiver is not always populated */
+	bias-pull-up;
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-mk802.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802.dts
new file mode 100644
index 000000000000..059fe9c5d024
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802.dts
@@ -0,0 +1,144 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802";
+	compatible = "allwinner,mk802", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802ii.dts
new file mode 100644
index 000000000000..17dcdf031118
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802ii.dts
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802ii";
+	compatible = "allwinner,mk802ii", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
new file mode 100644
index 000000000000..d425d9ee83db
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
@@ -0,0 +1,225 @@
+/*
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Olimex A10-OLinuXino-LIME";
+	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		led {
+			label = "a10-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&cpu0 {
+	/*
+	 * The A10-Lime is known to be unstable when running at 1008 MHz
+	 */
+	operating-points =
+		/* kHz	  uV */
+		<912000	1350000>,
+		<864000	1300000>,
+		<624000	1250000>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxinolime: led-pin {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino.dts
new file mode 100644
index 000000000000..a332d61fd561
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino.dts
@@ -0,0 +1,200 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "LinkSprite pcDuino";
+	compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "pcduino:green:tx";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			label = "pcduino:green:rx";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-back {
+			label = "Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+		};
+
+		key-home {
+			label = "Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+		};
+
+		key-menu {
+			label = "Key Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
+	usb2_vbus-supply = <&reg_vcc5v0>; /* USB2 VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino2.dts
new file mode 100644
index 000000000000..bc4f128965ed
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino2.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2015 Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The LinkSprite pcDuino2 board is almost identical to the older
+ * LinkSprite pcDuino1 board. The only software visible difference
+ * is that the pcDuino2 board got a USB VBUS voltage regulator, which
+ * is controlled by the PD2 pin (pulled-up by default). Also one of
+ * the USB host ports has been replaced with a USB WIFI chip.
+ */
+
+#include "sun4i-a10-pcduino.dts"
+
+/ {
+	model = "LinkSprite pcDuino2";
+	compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc3v3>; /* USB WIFI is always on */
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
new file mode 100644
index 000000000000..c32596947647
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
@@ -0,0 +1,206 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Point of View Protab2-IPS9";
+	compatible = "pov,protab2-ips9", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	/* pull-ups and devices require AXP209 LDO3 */
+	status = "failed";
+};
+
+&i2c2 {
+	status = "okay";
+
+	touchscreen@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		reg = <0x5c>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
+		attb-gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
+		enable-gpios = <&pio 0 5 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-400 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button-800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-topwise-a721.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-topwise-a721.dts
new file mode 100644
index 000000000000..3628f12d2521
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-topwise-a721.dts
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 Pascal Roeleven <dev@pascalroeleven.nl>
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Topwise A721";
+	compatible = "topwise,a721", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 100000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_vbat>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		brightness-levels = <0 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	panel {
+		compatible = "starry,kr070pe2t";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_power>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_panel>;
+			};
+		};
+	};
+
+	reg_lcd_power: reg-lcd-power {
+		compatible = "regulator-fixed";
+		regulator-name = "reg-lcd-power";
+		gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+		enable-active-high;
+	};
+
+	reg_vbat: reg-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	accelerometer@4c {
+		compatible = "fsl,mma7660";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-571 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <571428>;
+	};
+
+	button-761 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <761904>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-ph-supply = <&reg_vcc3v3>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi b/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi
new file mode 100644
index 000000000000..51a6464aab9a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi
@@ -0,0 +1,1271 @@
+/*
+ * Copyright 2012 Stefan Roese
+ * Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+				 <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0-tve0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
+			clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1400000>,
+				<912000	1350000>,
+				<864000	1300000>,
+				<624000	1250000>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu-alert0 {
+					/* milliCelsius */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun4i-a10-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		default-pool {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@0 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
+			};
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ccu CLK_AHB_DMA>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand-controller@1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <37>;
+			clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>, <&spi1_cs0_pin>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <55>;
+			clocks = <&ccu CLK_AHB_EMAC>;
+			allwinner,sram = <&emac_sram 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins>;
+			status = "disabled";
+		};
+
+		mdio: mdio@1c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun4i-a10-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <44>;
+			resets = <&ccu RST_TCON0>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_TCON0_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+
+					tcon0_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun4i-a10-tcon";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <45>;
+			resets = <&ccu RST_TCON1>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD1>,
+				 <&ccu CLK_TCON1_CH0>,
+				 <&ccu CLK_TCON1_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon1-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 15>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon1>;
+					};
+
+					tcon1_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun4i-a10-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_VE>;
+			interrupts = <53>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			interrupts = <32>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			interrupts = <33>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			interrupts = <34>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC3>, <&ccu CLK_MMC3>;
+			clock-names = "ahb", "mmc";
+			interrupts = <35>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_AHB_OTG>;
+			interrupts = <38>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun4i-a10-usb-phy";
+			reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
+			reg-names = "phy_ctrl", "pmu1", "pmu2";
+			clocks = <&ccu CLK_USB_PHY>;
+			clock-names = "usb_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@1c14000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ccu CLK_AHB_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c14400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <64>;
+			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <86>;
+			clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+		};
+
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun4i-a10-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <58>;
+			clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "pll-0", "pll-1";
+			dmas = <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_DEDICATED 24>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+
+					hdmi_in_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun4i-a10-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <56>;
+			clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1c000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <40>;
+			clocks = <&ccu CLK_AHB_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1c400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <65>;
+			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		csi1: csi@1c1d000 {
+			compatible = "allwinner,sun4i-a10-csi1";
+			reg = <0x01c1d000 0x1000>;
+			interrupts = <43>;
+			clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "ram";
+			resets = <&ccu RST_CSI1>;
+			status = "disabled";
+		};
+
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <50>;
+			clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+			       <&dma SUN4I_DMA_DEDICATED 30>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun4i-a10-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun4i-a10-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			can0_ph_pins: can0-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			/omit-if-no-ref/
+			csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+				pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+				       "PG6", "PG7", "PG8", "PG9", "PG10",
+				       "PG11";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH8", "PH9",
+				       "PH10", "PH11", "PH12", "PH13", "PH14",
+				       "PH15", "PH16", "PH17", "PH18", "PH19",
+				       "PH20", "PH21", "PH22", "PH23", "PH24",
+				       "PH25", "PH26", "PH27";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_clk_pg_pin: csi1-clk-pg-pin {
+				pins = "PG1";
+				function = "csi1";
+			};
+
+			emac_pins: emac0-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				       "PA7", "PA8", "PA9", "PA10",
+				       "PA11", "PA12", "PA13", "PA14",
+				       "PA15", "PA16";
+				function = "emac";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			ir0_rx_pins: ir0-rx-pin {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			ir0_tx_pins: ir0-tx-pin {
+				pins = "PB3";
+				function = "ir0";
+			};
+
+			ir1_rx_pins: ir1-rx-pin {
+				pins = "PB23";
+				function = "ir1";
+			};
+
+			ir1_tx_pins: ir1-tx-pin {
+				pins = "PB22";
+				function = "ir1";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			ps2_ch0_pins: ps2-ch0-pins {
+				pins = "PI20", "PI21";
+				function = "ps2";
+			};
+
+			ps2_ch1_ph_pins: ps2-ch1-ph-pins {
+				pins = "PH12", "PH13";
+				function = "ps2";
+			};
+
+			pwm0_pin: pwm0-pin {
+				pins = "PB2";
+				function = "pwm";
+			};
+
+			pwm1_pin: pwm1-pin {
+				pins = "PI3";
+				function = "pwm";
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PB13";
+				function = "spdif";
+				bias-pull-up;
+			};
+
+			spi0_pi_pins: spi0-pi-pins {
+				pins = "PI11", "PI12", "PI13";
+				function = "spi0";
+			};
+
+			spi0_cs0_pi_pin: spi0-cs0-pi-pin {
+				pins = "PI10";
+				function = "spi0";
+			};
+
+			spi1_pins: spi1-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			spi1_cs0_pin: spi1-cs0-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			spi2_pb_pins: spi2-pb-pins {
+				pins = "PB15", "PB16", "PB17";
+				function = "spi2";
+			};
+
+			spi2_pc_pins: spi2-pc-pins {
+				pins = "PC20", "PC21", "PC22";
+				function = "spi2";
+			};
+
+			spi2_cs0_pb_pin: spi2-cs0-pb-pin {
+				pins = "PB14";
+				function = "spi2";
+			};
+
+			spi2_cs0_pc_pins: spi2-cs0-pc-pin {
+				pins = "PC19";
+				function = "spi2";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+			};
+
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PA10", "PA11";
+				function = "uart1";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>,
+				     <23>,
+				     <24>,
+				     <25>,
+				     <67>,
+				     <68>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <24>;
+			clocks = <&osc24M>;
+		};
+
+		rtc: rtc@1c20d00 {
+			compatible = "allwinner,sun4i-a10-rtc";
+			reg = <0x01c20d00 0x20>;
+			interrupts = <24>;
+		};
+
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun4i-a10-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <13>;
+			clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
+			clock-names = "apb", "ir";
+			interrupts = <5>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir@1c21c00 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
+			clock-names = "apb", "ir";
+			interrupts = <6>;
+			reg = <0x01c21c00 0x40>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <16>;
+			clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sid: eeprom@1c23800 {
+			compatible = "allwinner,sun4i-a10-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun4i-a10-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <17>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <18>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@1c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <19>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@1c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART7>;
+			status = "disabled";
+		};
+
+		ps20: ps2@1c2a000 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a000 0x400>;
+			interrupts = <62>;
+			clocks = <&ccu CLK_APB1_PS20>;
+			status = "disabled";
+		};
+
+		ps21: ps2@1c2a400 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a400 0x400>;
+			interrupts = <63>;
+			clocks = <&ccu CLK_APB1_PS21>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_APB1_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_APB1_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_APB1_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun4i-a10-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <26>;
+			clocks = <&ccu CLK_APB1_CAN>;
+			status = "disabled";
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <69>,
+				     <70>,
+				     <71>,
+				     <72>,
+				     <73>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pmu";
+			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_GPU>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun4i-a10-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_DRAM_DE_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+
+					fe0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@1e20000 {
+			compatible = "allwinner,sun4i-a10-display-frontend";
+			reg = <0x01e20000 0x20000>;
+			interrupts = <48>;
+			clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
+				 <&ccu CLK_DRAM_DE_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe1>;
+					};
+
+					fe1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@1e40000 {
+			compatible = "allwinner,sun4i-a10-display-backend";
+			reg = <0x01e40000 0x10000>;
+			interrupts = <48>;
+			clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
+				 <&ccu CLK_DRAM_DE_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be1>;
+					};
+
+					be1_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be1>;
+					};
+
+					be1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun4i-a10-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_DRAM_DE_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+
+					be0_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+
+					be0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t003.dts
new file mode 100644
index 000000000000..04b0e6d28769
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t003.dts
@@ -0,0 +1,137 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Auxtek t003 A10s hdmi tv-stick";
+	compatible = "allwinner,auxtek-t003", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_t003>;
+
+		led {
+			label = "t003-tv-dongle:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_t003: led-pin {
+		pins = "PB2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t004.dts
new file mode 100644
index 000000000000..667bc2dc1ea9
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t004.dts
@@ -0,0 +1,149 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Auxtek t004 A10s hdmi tv-stick";
+	compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_t004>;
+
+		led {
+			label = "t004-tv-dongle:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+			default-state = "on";
+		};
+	};
+
+	reg_vmmc1: vmmc1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vmmc1>;
+	bus-width = <4>;
+	non-removable;
+	cap-sdio-irq;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_t004: led-pin {
+		pins = "PB2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-mk802.dts
new file mode 100644
index 000000000000..d0219404c231
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-mk802.dts
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802-A10s";
+	compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "mk802:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-olinuxino-micro.dts
new file mode 100644
index 000000000000..5832bb31fc51
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-olinuxino-micro.dts
@@ -0,0 +1,272 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Olimex A10s-Olinuxino Micro";
+	compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		led {
+			label = "a10s-olinuxino-micro:green:usr";
+			gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pa_pins>;
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp152: pmic@30 {
+		reg = <0x30>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp152.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c16";
+		pagesize = <16>;
+		reg = <0x50>;
+		read-only;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
+
+	button-392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
+
+	button-601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
+
+	button-795 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button-987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxino: led-pin {
+		pins = "PE3";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pb_pins>,
+		    <&spi2_cs0_pb_pin>;
+	status = "okay";
+};
+
+&tcon0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pc_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-r7-tv-dongle.dts
new file mode 100644
index 000000000000..964360f0610a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-r7-tv-dongle.dts
@@ -0,0 +1,118 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "R7 A10s hdmi tv-stick";
+	compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_r7>;
+
+		led {
+			label = "r7-tv-dongle:green:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_r7: led-pin {
+		pins = "PB2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-wobo-i5.dts
new file mode 100644
index 000000000000..ef8baa992687
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-wobo-i5.dts
@@ -0,0 +1,195 @@
+/*
+ * Copyright 2015 Jelle van der Waa <jelle@vdwaa.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "A10s-Wobo i5";
+	compatible = "wobo,a10s-wobo-i5", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "a10s-wobo-i5:blue:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pd_pins>;
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_ldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi2";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a10s.dtsi b/arch/arm/boot/dts/allwinner/sun5i-a10s.dtsi
new file mode 100644
index 000000000000..09c486b608b2
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s.dtsi
@@ -0,0 +1,173 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun5i.dtsi"
+
+#include <dt-bindings/dma/sun4i-a10.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_HDMI>,
+				 <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DRAM_DE_BE>,
+				 <&ccu CLK_DE_BE>, <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+	};
+
+	display-engine {
+		compatible = "allwinner,sun5i-a10s-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
+	soc {
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun5i-a10s-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <58>;
+			clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "pll-0", "pll-1";
+			dmas = <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_DEDICATED 24>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint {
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun5i-a10s-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&ccu CLK_HOSC>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun5i-a10s-ccu";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&pio {
+	compatible = "allwinner,sun5i-a10s-pinctrl";
+
+	uart0_pb_pins: uart0-pb-pins {
+		pins = "PB19", "PB20";
+		function = "uart0";
+	};
+
+	uart2_pc_pins: uart2-pc-pins {
+		pins = "PC18", "PC19";
+		function = "uart2";
+	};
+
+	emac_pa_pins: emac-pa-pins {
+		pins = "PA0", "PA1", "PA2",
+				"PA3", "PA4", "PA5", "PA6",
+				"PA7", "PA8", "PA9", "PA10",
+				"PA11", "PA12", "PA13", "PA14",
+				"PA15", "PA16";
+		function = "emac";
+	};
+
+	mmc1_pins: mmc1-pins {
+		pins = "PG3", "PG4", "PG5",
+				 "PG6", "PG7", "PG8";
+		function = "mmc1";
+		drive-strength = <30>;
+	};
+
+	spi2_pb_pins: spi2-pb-pins {
+		pins = "PB12", "PB13", "PB14";
+		function = "spi2";
+	};
+
+	spi2_cs0_pb_pin: spi2-cs0-pb-pin {
+		pins = "PB11";
+		function = "spi2";
+	};
+};
+
+&tcon0_out {
+	tcon0_out_hdmi: endpoint@2 {
+		reg = <2>;
+		remote-endpoint = <&hdmi_in_tcon0>;
+		allwinner,tcon-channel = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-difrnce-dit4350.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-difrnce-dit4350.dts
new file mode 100644
index 000000000000..894c4c4f9a1f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-difrnce-dit4350.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Difrnce DIT4350";
+	compatible = "difrnce,dit4350", "allwinner,sun5i-a13";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-d709.dts
new file mode 100644
index 000000000000..d059388d7252
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-d709.dts
@@ -0,0 +1,190 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Empire Electronix D709 tablet";
+	compatible = "empire-electronix,d709", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_vcc3v3>;
+		/* TODO: backlight uses axp gpio1 as enable pin */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-m712.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-m712.dts
new file mode 100644
index 000000000000..b1e2afd9de52
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-m712.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Empire Electronix M712 tablet";
+	compatible = "empire-electronix,m712", "allwinner,sun5i-a13";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-hsg-h702.dts
new file mode 100644
index 000000000000..9b9f2a574851
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-hsg-h702.dts
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "HSG H702";
+	compatible = "hsg,h702", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-inet-98v-rev2.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-inet-98v-rev2.dts
new file mode 100644
index 000000000000..439ae3b537df
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-inet-98v-rev2.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+
+/ {
+	model = "INet-98V Rev 02";
+	compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-licheepi-one.dts
new file mode 100644
index 000000000000..3a6c4bd0a44f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-licheepi-one.dts
@@ -0,0 +1,214 @@
+/*
+ * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun5i-a13-olinuxino.dts, which is
+ *   Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *   Copyright 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Lichee Pi One";
+	compatible = "licheepi,licheepi-one", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "licheepi:red:usr";
+			gpios = <&pio 2 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			label = "licheepi:green:usr";
+			gpios = <&pio 2 19 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-2 {
+			label = "licheepi:blue:usr";
+			gpios = <&pio 2 4 GPIO_ACTIVE_LOW>;
+		};
+
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-984 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <984126>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "csi-1.8v";
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "csi-2.8v";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino-micro.dts
new file mode 100644
index 000000000000..bfe1075e62cc
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino-micro.dts
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
+ * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Olimex A13-Olinuxino Micro";
+	compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinom>;
+
+		led {
+			label = "a13-olinuxino-micro:green:power";
+			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxinom: led-pin {
+		pins = "PG9";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino.dts
new file mode 100644
index 000000000000..fadeae3cd8bb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino.dts
@@ -0,0 +1,247 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Olimex A13-Olinuxino";
+	compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		led {
+			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	bridge {
+		compatible = "dumb-vga-dac";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
+
+	button-392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
+
+	button-601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
+
+	button-795 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button-987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxino: led-pin {
+		pins = "PG9";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vga_bridge_in>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts
new file mode 100644
index 000000000000..ab8d138dc11d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 Denis Burkov <hitechshell@mail.ru>
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "PocketBook 614 Plus";
+	compatible = "pocketbook,614-plus", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			linux,default-trigger = "default-on";
+			gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "Right";
+			linux,code = <KEY_NEXT>;
+			gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */
+		};
+
+		key-1 {
+			label = "Left";
+			linux,code = <KEY_PREVIOUS>;
+			gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
+		};
+	};
+
+	reg_3v3_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-mmc0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
+		vin-supply = <&reg_vcc3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-300 {
+		label = "Down";
+		linux,code = <KEY_DOWN>;
+		channel = <0>;
+		voltage = <300000>;
+	};
+
+	button-700 {
+		label = "Up";
+		linux,code = <KEY_UP>;
+		channel = <0>;
+		voltage = <700000>;
+	};
+
+	button-1000 {
+		label = "Left";
+		linux,code = <KEY_LEFT>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+
+	button-1500 {
+		label = "Right";
+		linux,code = <KEY_RIGHT>;
+		channel = <0>;
+		voltage = <1500000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_3v3_mmc0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
new file mode 100644
index 000000000000..d60407772e5d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2019 Ondrej Jirman <megous@megous.com>
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "PocketBook Touch Lux 3";
+	compatible = "pocketbook,touch-lux-3", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_vcc3v3>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		label = "GPIO Keys";
+
+		key-right {
+			label = "Right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&pio 6 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG9 */
+		};
+
+		key-left {
+			label = "Left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&pio 6 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG10 */
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-1v8-nor-ctp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_1v8_nor: regulator-nor {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-nor";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v8>;
+		regulator-always-on;
+	};
+
+	reg_1v8_ctp: regulator-ctp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-ctp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v8>;
+	};
+
+	reg_3v3_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-mmc0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
+		vin-supply = <&reg_vcc3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* Touchpanel is connected here. */
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_3v3_mmc0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+	/* We need this otherwise the LDO3 would overload */
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pe_pins>, <&spi2_cs0_pe_pin>;
+	status = "okay";
+
+	epd_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "macronix,mx25u4033", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-q8-tablet.dts
new file mode 100644
index 000000000000..f9fc1c8b60b8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-q8-tablet.dts
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Q8 A13 Tablet";
+	compatible = "allwinner,q8-a13", "allwinner,sun5i-a13";
+
+	panel: panel {
+		compatible = "bananapi,s070wv20-ct16";
+		power-supply = <&reg_vcc3v3>;
+		enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */
+		backlight = <&backlight>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
new file mode 100644
index 000000000000..be486d28d04f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
@@ -0,0 +1,116 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Utoo P66";
+	compatible = "utoo,p66", "allwinner,sun5i-a13";
+
+	/* The P66 uses the uart pins as gpios */
+	aliases {
+		/delete-property/serial0;
+	};
+
+	chosen {
+		/delete-property/stdout-path;
+	};
+
+	i2c_lcd: i2c {
+		/* The lcd panel i2c interface is hooked up via gpios */
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
+		scl-gpios = <&pio 6 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG10 */
+		i2c-gpio,delay-us = <5>;
+	};
+};
+
+&backlight {
+	/* Note levels of 10 / 20% result in backlight off */
+	brightness-levels = <0 30 40 50 60 70 80 90 100>;
+	default-brightness-level = <6>;
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+
+	mmccard: mmccard@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+};
+
+&touchscreen {
+	compatible = "chipone,icn8318";
+	reg = <0x40>;
+	/* The P66 uses a different EINT then the reference design */
+	interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+	/* The icn8318 binding expects wake-gpios instead of power-gpios */
+	wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	touchscreen-size-x = <800>;
+	touchscreen-size-y = <480>;
+	touchscreen-inverted-x;
+	touchscreen-swapped-x-y;
+	status = "okay";
+};
+
+&uart1 {
+	/* The P66 uses the uart pins as gpios */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi b/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi
new file mode 100644
index 000000000000..2c9152b151be
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi
@@ -0,0 +1,118 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun5i.dtsi"
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		cpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu-alert0 {
+					/* milliCelsius */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	display-engine {
+		compatible = "allwinner,sun5i-a13-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
+	soc {
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun5i-a13-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&ccu CLK_HOSC>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun5i-a13-ccu";
+};
+
+&cpu0 {
+	clock-latency = <244144>; /* 8 32k periods */
+	operating-points =
+		/* kHz	  uV */
+		<1008000 1400000>,
+		<912000 1350000>,
+		<864000 1300000>,
+		<624000 1200000>,
+		<576000 1200000>,
+		<432000 1200000>;
+	#cooling-cells = <2>;
+};
+
+&pio {
+	compatible = "allwinner,sun5i-a13-pinctrl";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts
new file mode 100644
index 000000000000..ffbd99c176db
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts
@@ -0,0 +1,238 @@
+/*
+ * Copyright 2016 Free Electrons
+ * Copyright 2016 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-gr8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing C.H.I.P. Pro";
+	compatible = "nextthing,chip-pro", "nextthing,gr8";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "chip-pro:white:status";
+			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc0_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		* The interrupt is routed through the "External Fast
+		* Interrupt Request" pin (ball G13 of the module)
+		* directly to the main interrupt controller, without
+		* any other controller interfering.
+		*/
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>;
+	status = "disabled";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc0_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		allwinner,rb = <0>;
+		nand-ecc-mode = "hw";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>, <&pwm1_pins>;
+	status = "disabled";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+/*
+ * Both LDO3 and LDO4 are used in parallel to power up the
+ * WiFi/BT chip.
+ */
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-1";
+	regulator-always-on;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+	regulator-always-on;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pd_pins>, <&uart2_cts_rts_pd_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The CHIP Pro doesn't have a controllable VBUS, nor does it
+	 * have any 5v rail on the board itself.
+	 *
+	 * If one wants to use it as a true OTG port, it should be
+	 * done in the baseboard, and its DT / overlay will add it.
+	 */
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-gr8-evb.dts b/arch/arm/boot/dts/allwinner/sun5i-gr8-evb.dts
new file mode 100644
index 000000000000..f4fe258ef06d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8-evb.dts
@@ -0,0 +1,333 @@
+/*
+ * Copyright 2016 Free Electrons
+ * Copyright 2016 NextThing Co
+ *
+ * Mylène Josserand <mylene.josserand@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-gr8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing GR8-EVB";
+	compatible = "nextthing,gr8-evb", "nextthing,gr8";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 10000 0>;
+		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_vcc3v3>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+	};
+
+	sound-analog {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "gr8-evb-wm8978";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8978>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		* The interrupt is routed through the "External Fast
+		* Interrupt Request" pin (ball G13 of the module)
+		* directly to the main interrupt controller, without
+		* any other controller interfering.
+		*/
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	wm8978: codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8978";
+		reg = <0x1a>;
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button-390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button-600 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-980 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <980000>;
+	};
+
+	button-1180 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1180000>;
+	};
+
+	button-1400 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
+
+	/* MLC Support sucks for now */
+	status = "disabled";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&rtp {
+	allwinner,ts-attached;
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&tve0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The GR8-EVB has a somewhat interesting design. There's a
+	 * pin supposed to control VBUS, an ID pin, a VBUS detect pin,
+	 * so everything should work just fine.
+	 *
+	 * Except that the pin supposed to control VBUS is not
+	 * connected to any controllable output, neither to the SoC
+	 * through a GPIO or to the PMIC, and it is pulled down,
+	 * meaning that we will never be able to enable VBUS on this
+	 * board.
+	 */
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-gr8.dtsi b/arch/arm/boot/dts/allwinner/sun5i-gr8.dtsi
new file mode 100644
index 000000000000..98a8fd5e89e8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8.dtsi
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2016 Mylène Josserand
+ *
+ * Mylène Josserand <mylene.josserand@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun5i.dtsi"
+
+#include <dt-bindings/clock/sun5i-ccu.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/reset/sun5i-ccu.h>
+
+/ {
+	display-engine {
+		compatible = "allwinner,sun5i-a13-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
+	soc {
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun5i-a10s-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&ccu CLK_HOSC>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <13>;
+			clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <16>;
+			clocks = <&ccu CLK_APB0_I2S>, <&ccu CLK_I2S>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+	};
+};
+
+&ccu {
+	compatible = "nextthing,gr8-ccu";
+};
+
+&pio {
+	compatible = "nextthing,gr8-pinctrl";
+
+	i2s0_data_pins: i2s0-data-pins {
+		pins = "PB6", "PB7", "PB8", "PB9";
+		function = "i2s0";
+	};
+
+	i2s0_mclk_pin: i2s0-mclk-pin {
+		pins = "PB5";
+		function = "i2s0";
+	};
+
+	pwm1_pins: pwm1-pin {
+		pins = "PG13";
+		function = "pwm1";
+	};
+
+	spdif_tx_pin: spdif-tx-pin {
+		pins = "PB10";
+		function = "spdif";
+		bias-pull-up;
+	};
+
+	uart1_cts_rts_pins: uart1-cts-rts-pins {
+		pins = "PG5", "PG6";
+		function = "uart1";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts b/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts
new file mode 100644
index 000000000000..8c784a2c086e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts
@@ -0,0 +1,282 @@
+/*
+ * Copyright 2015 Free Electrons
+ * Copyright 2015 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-r8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing C.H.I.P.";
+	compatible = "nextthing,chip", "allwinner,sun5i-r8", "allwinner,sun5i-a13";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart3;
+		spi0 = &spi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "chip:white:status";
+			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc0_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&pio 3 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD2 */
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		 * The interrupt is routed through the "External Fast
+		 * Interrupt Request" pin (ball G13 of the module)
+		 * directly to the main interrupt controller, without
+		 * any other controller interfering.
+		 */
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "okay";
+
+	xio: gpio@38 {
+		compatible = "nxp,pcf8574a";
+		reg = <0x38>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&pio>;
+		interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&mmc0_pins {
+	bias-pull-up;
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc0_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "cpuvdd";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "corevdd";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "rtcvdd";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+/*
+ * Both LDO3 and LDO4 are used in parallel to power up the WiFi/BT
+ * Chip.
+ *
+ * If those are not enabled, the SDIO part will not enumerate, and
+ * since there's no way currently to pass DT infos to an SDIO device,
+ * we cannot really do better than this ugly hack for now.
+ */
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-1";
+	regulator-always-on;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+	regulator-always-on;
+};
+
+&reg_ldo5 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_usb0_vbus {
+	vin-supply = <&reg_vcc5v0>;
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pe_pins>;
+	status = "disabled";
+};
+
+&tcon0 {
+	status = "okay";
+};
+
+&tve0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>,
+		    <&uart3_cts_rts_pg_pins>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&axp_gpio 3 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-r8.dtsi b/arch/arm/boot/dts/allwinner/sun5i-r8.dtsi
new file mode 100644
index 000000000000..de35dbcd1191
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-r8.dtsi
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2015 Free Electrons
+ * Copyright 2015 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun5i-a13.dtsi"
+
diff --git a/arch/arm/boot/dts/allwinner/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun5i-reference-design-tablet.dtsi
new file mode 100644
index 000000000000..6847f66699ac
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-reference-design-tablet.dtsi
@@ -0,0 +1,194 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; /* AXP GPIO1 */
+		power-supply = <&reg_vcc3v0>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	/*
+	 * The gsl1680 is rated at 400KHz and it will not work reliable at
+	 * 100KHz, this has been confirmed on multiple different q8 tablets.
+	 * All other devices on this bus are also rated for 400KHz.
+	 */
+	clock-frequency = <400000>;
+
+	touchscreen: touchscreen@40 {
+		reg = <0x40>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */
+		power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+		/* Tablet dts must provide reg and compatible */
+		status = "disabled";
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i.dtsi b/arch/arm/boot/dts/allwinner/sun5i.dtsi
new file mode 100644
index 000000000000..d7c7b454a11a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i.dtsi
@@ -0,0 +1,819 @@
+/*
+ * Copyright 2012-2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun5i-ccu.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/reset/sun5i-ccu.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&ccu CLK_CPU>;
+		};
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>;
+			status = "disabled";
+		};
+
+		framebuffer-lcd0-tve0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-tve0";
+			clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>,
+				 <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		default-pool {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		dma-ranges;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun5i-a13-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@0 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun5i-a13-sram-a3-a4",
+						     "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
+			};
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,sun5i-a13-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun5i-a13-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		mbus: dram-controller@1c01000 {
+			compatible = "allwinner,sun5i-a13-mbus";
+			reg = <0x01c01000 0x1000>;
+			clocks = <&ccu CLK_MBUS>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0x20000000>;
+			#interconnect-cells = <1>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ccu CLK_AHB_DMA>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand-controller@1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <37>;
+			clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tve0: tv-encoder@1c0a000 {
+			compatible = "allwinner,sun4i-a10-tv-encoder";
+			reg = <0x01c0a000 0x1000>;
+			clocks = <&ccu CLK_AHB_TVE>;
+			resets = <&ccu RST_TVE>;
+			status = "disabled";
+
+			port {
+
+				tve0_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_tve0>;
+				};
+			};
+		};
+
+		emac: ethernet@1c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <55>;
+			clocks = <&ccu CLK_AHB_EMAC>;
+			allwinner,sram = <&emac_sram 1>;
+			status = "disabled";
+		};
+
+		mdio: mdio@1c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun5i-a13-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <44>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+			resets = <&ccu RST_LCD>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD>,
+				 <&ccu CLK_TCON_CH0>,
+				 <&ccu CLK_TCON_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon-data-clock";
+			#clock-cells = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_be0: endpoint {
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_tve0: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tve0_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun5i-a13-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_VE>;
+			interrupts = <53>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			interrupts = <32>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			interrupts = <33>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			interrupts = <34>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_AHB_OTG>;
+			interrupts = <38>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-phy";
+			reg = <0x01c13400 0x10>, <0x01c14800 0x4>;
+			reg-names = "phy_ctrl", "pmu1";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb_phy";
+			resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset", "usb1_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@1c14000 {
+			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ccu CLK_AHB_EHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c14400 {
+			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <40>;
+			clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun5i-a13-crypto",
+				     "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <54>;
+			clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@1c20000 {
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			emac_pd_pins: emac-pd-pins {
+				pins = "PD6", "PD7", "PD10",
+				       "PD11", "PD12", "PD13", "PD14",
+				       "PD15", "PD18", "PD19", "PD20",
+				       "PD21", "PD22", "PD23", "PD24",
+				       "PD25", "PD26", "PD27";
+				function = "emac";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PB15", "PB16";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB17", "PB18";
+				function = "i2c2";
+			};
+
+			ir0_rx_pin: ir0-rx-pin {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			lcd_rgb565_pins: lcd-rgb565-pins {
+				pins = "PD3", "PD4", "PD5", "PD6", "PD7",
+						 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+						 "PD19", "PD20", "PD21", "PD22", "PD23",
+						 "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			lcd_rgb666_pins: lcd-rgb666-pins {
+				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				       "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+				       "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_4bit_pc_pins: mmc2-4bit-pc-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc2_4bit_pe_pins: mmc2-4bit-pe-pins {
+				pins = "PE4", "PE5", "PE6", "PE7",
+				       "PE8", "PE9";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11", "PC12", "PC13",
+				       "PC14", "PC15";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			nand_pins: nand-pins {
+				pins = "PC0", "PC1", "PC2",
+				       "PC5", "PC8", "PC9", "PC10",
+				       "PC11", "PC12", "PC13", "PC14",
+				       "PC15";
+				function = "nand0";
+			};
+
+			nand_cs0_pin: nand-cs0-pin {
+				pins = "PC4";
+				function = "nand0";
+			};
+
+			nand_rb0_pin: nand-rb0-pin {
+				pins = "PC6";
+				function = "nand0";
+			};
+
+			pwm0_pin: pwm0-pin {
+				pins = "PB2";
+				function = "pwm";
+			};
+
+			spi2_pe_pins: spi2-pe-pins {
+				pins = "PE1", "PE2", "PE3";
+				function = "spi2";
+			};
+
+			spi2_cs0_pe_pin: spi2-cs0-pe-pin {
+				pins = "PE0";
+				function = "spi2";
+			};
+
+			uart1_pe_pins: uart1-pe-pins {
+				pins = "PE10", "PE11";
+				function = "uart1";
+			};
+
+			uart1_pg_pins: uart1-pg-pins {
+				pins = "PG3", "PG4";
+				function = "uart1";
+			};
+
+			uart2_pd_pins: uart2-pd-pins {
+				pins = "PD2", "PD3";
+				function = "uart2";
+			};
+
+			uart2_cts_rts_pd_pins: uart2-cts-rts-pd-pins {
+				pins = "PD4", "PD5";
+				function = "uart2";
+			};
+
+			uart3_pg_pins: uart3-pg-pins {
+				pins = "PG9", "PG10";
+				function = "uart3";
+			};
+
+			uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
+				pins = "PG11", "PG12";
+				function = "uart3";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>,
+				     <23>,
+				     <24>,
+				     <25>,
+				     <67>,
+				     <68>;
+			clocks = <&ccu CLK_HOSC>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <24>;
+			clocks = <&osc24M>;
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			interrupts = <5>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sid: eeprom@1c23800 {
+			compatible = "allwinner,sun4i-a10-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun5i-a13-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART3>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_APB1_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_APB1_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_APB1_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <69>, <70>, <71>, <72>,  <73>;
+			interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pmu";
+			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_GPU>;
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <320000000>;
+		};
+
+		timer@1c60000 {
+			compatible = "allwinner,sun5i-a13-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <82>, <83>;
+			clocks = <&ccu CLK_AHB_HSTIMER>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun5i-a13-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_DE_FE>, <&ccu CLK_DE_FE>,
+				 <&ccu CLK_DRAM_DE_FE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE>;
+			interconnects = <&mbus 19>;
+			interconnect-names = "dma-mem";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					reg = <1>;
+
+					fe0_out_be0: endpoint {
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun5i-a13-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE>;
+			interconnects = <&mbus 18>;
+			interconnect-names = "dma-mem";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					reg = <0>;
+
+					be0_in_fe0: endpoint {
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					reg = <1>;
+
+					be0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-app4-evb1.dts
new file mode 100644
index 000000000000..32d22025ac99
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-app4-evb1.dts
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2014 Boris Brezillon
+ *
+ * Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Allwinner A31 APP4 EVB1 Evaluation Board";
+	compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31-colombus.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-colombus.dts
new file mode 100644
index 000000000000..93a15eaaa8cb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-colombus.dts
@@ -0,0 +1,130 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "WITS A31 Colombus Evaluation Board";
+	compatible = "wits,colombus", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2c_lcd: i2c {
+		/* The lcd panel i2c interface is hooked up via gpios */
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 0 23 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA23 */
+		scl-gpios = <&pio 0 24 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA24 */
+		i2c-gpio,delay-us = <5>;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "fail";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	mma8452: mma8452@1d {
+		compatible = "fsl,mma8452";
+		reg = <0x1d>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PA9 */
+	};
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
new file mode 100644
index 000000000000..5bce7a32651e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
@@ -0,0 +1,338 @@
+/*
+ * Copyright 2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Merrii A31 Hummingbird";
+	compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
+
+	aliases {
+		rtc0 = &pcf8563;
+		rtc1 = &rtc;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vga-connector {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_dac_out>;
+			};
+		};
+	};
+
+	vga-dac {
+		compatible = "dumb-vga-dac";
+		vdd-supply = <&reg_vga_3v3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_dac_in: endpoint {
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_dac_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	reg_vga_3v3: vga-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vga-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Speaker", "LINEOUT",
+		"LINEIN", "Line In",
+		"MIC1", "Mic",
+		"MIC2", "Headset Mic",
+		"Mic",	"MBIAS",
+		"Headset Mic", "HBIAS";
+	allwinner,pa-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	/* pull-ups and devices require AXP221 DLDO3 */
+	status = "failed";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd0_rgb888_pins>;
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vga_dac_in>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31-i7.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-i7.dts
new file mode 100644
index 000000000000..744723d956f0
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-i7.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2015 Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Mele I7 Quad top set box";
+	compatible = "mele,i7", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "i7:blue:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&tcon0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31-m9.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-m9.dts
new file mode 100644
index 000000000000..7d2eaaf5c33e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-m9.dts
@@ -0,0 +1,212 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Mele M9 top set box";
+	compatible = "mele,m9", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "m9:blue:pwr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ethernet-phy";
+};
+
+/*
+ * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached
+ * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is
+ * marked as regulator-always-on.
+ */
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-hub";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_aldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-mele-a1000g-quad.dts
new file mode 100644
index 000000000000..83611434270c
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-mele-a1000g-quad.dts
@@ -0,0 +1,217 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Mele A1000G Quad top set box";
+	compatible = "mele,a1000g-quad", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "a1000g:blue:pwr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ethernet-phy";
+};
+
+/*
+ * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached
+ * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is
+ * marked as regulator-always-on.
+ */
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-hub";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_aldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi
new file mode 100644
index 000000000000..f0145d6b9c53
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi
@@ -0,0 +1,1422 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include <dt-bindings/clock/sun6i-a31-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/reset/sun6i-a31-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &gmac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		simplefb_hdmi: framebuffer-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_AHB1_HDMI>, <&ccu CLK_DRAM_BE0>,
+				 <&ccu CLK_IEP_DRC0>, <&ccu CLK_BE0>,
+				 <&ccu CLK_LCD0_CH1>, <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+
+		simplefb_lcd: framebuffer-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_DRAM_BE0>, <&ccu CLK_IEP_DRC0>,
+				 <&ccu CLK_BE0>, <&ccu CLK_LCD0_CH0>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	cpus {
+		enable-method = "allwinner,sun6i-a31";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu-alert0 {
+					/* milliCelsius */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext_osc32k";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
+		 */
+		mii_phy_tx_clk: clk-mii-phy-tx {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: clk-gmac-int-tx {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@1c200d0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x01c200d0 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun6i-a31-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun6i-a31-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_DMA>;
+			resets = <&ccu RST_AHB1_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun6i-a31-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma 11>;
+			resets = <&ccu RST_AHB1_LCD0>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
+			clocks = <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_LCD0_CH0>,
+				 <&ccu CLK_LCD0_CH1>,
+				 <&ccu 15>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1",
+				      "lvds-alt";
+			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+
+					tcon0_in_drc1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&drc1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun6i-a31-tcon";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma 12>;
+			resets = <&ccu RST_AHB1_LCD1>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd", "lvds";
+			clocks = <&ccu CLK_AHB1_LCD1>,
+				 <&ccu CLK_LCD1_CH0>,
+				 <&ccu CLK_LCD1_CH1>,
+				 <&ccu 15>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1",
+				      "lvds-alt";
+			clock-output-names = "tcon1-pixel-clock";
+			#clock-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_out_tcon1>;
+					};
+
+					tcon1_in_drc1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&drc1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB1_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_AHB1_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB1_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_AHB1_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB1_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_AHB1_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_AHB1_MMC3>,
+				 <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_AHB1_MMC3>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun6i-a31-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
+			resets = <&ccu RST_AHB1_HDMI>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			dmas = <&dma 13>, <&dma 13>, <&dma 14>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+
+					hdmi_in_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun6i-a31-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_AHB1_OTG>;
+			resets = <&ccu RST_AHB1_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun6i-a31-usb-phy";
+			reg = <0x01c19400 0x10>,
+			      <0x01c1a800 0x4>,
+			      <0x01c1b800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_EHCI0>;
+			resets = <&ccu RST_AHB1_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_AHB1_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1b000 {
+			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_EHCI1>;
+			resets = <&ccu RST_AHB1_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1b400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1b400 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_AHB1_OHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@1c1c400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_OHCI2>, <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_AHB1_OHCI2>;
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun6i-a31-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun6i-a31-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			gmac_gmii_pins: gmac-gmii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3",
+						"PA4", "PA5", "PA6", "PA7",
+						"PA8", "PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14",	"PA15",
+						"PA16", "PA17", "PA18", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA25", "PA26", "PA27";
+				function = "gmac";
+				/*
+				 * data lines in GMII mode run at 125MHz and
+				 * might need a higher signal drive strength
+				 */
+				drive-strength = <30>;
+			};
+
+			gmac_mii_pins: gmac-mii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3",
+						"PA8", "PA9", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA26", "PA27";
+				function = "gmac";
+			};
+
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3",
+						"PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA25", "PA26", "PA27";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PH14", "PH15";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH16", "PH17";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PH18", "PH19";
+				function = "i2c2";
+			};
+
+			lcd0_rgb888_pins: lcd0-rgb888-pins {
+				pins = "PD0", "PD1", "PD2", "PD3",
+						 "PD4", "PD5", "PD6", "PD7",
+						 "PD8", "PD9", "PD10", "PD11",
+						 "PD12", "PD13", "PD14", "PD15",
+						 "PD16", "PD17", "PD18", "PD19",
+						 "PD20", "PD21", "PD22", "PD23",
+						 "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+						 "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_4bit_pins: mmc2-4bit-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11", "PC12",
+						 "PC13", "PC14", "PC15",
+						 "PC24";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc3_8bit_emmc_pins: mmc3-8bit-emmc-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11", "PC12",
+						 "PC13", "PC14", "PC15",
+						 "PC24";
+				function = "mmc3";
+				drive-strength = <40>;
+				bias-pull-up;
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PH28";
+				function = "spdif";
+			};
+
+			uart0_ph_pins: uart0-ph-pins {
+				pins = "PH20", "PH21";
+				function = "uart0";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt1: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_APB1_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>, <&dma 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_DAUDIO0>, <&ccu CLK_DAUDIO0>;
+			resets = <&ccu RST_APB1_DAUDIO0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_DAUDIO1>, <&ccu CLK_DAUDIO1>;
+			resets = <&ccu RST_APB1_DAUDIO1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun6i-a31-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART0>;
+			resets = <&ccu RST_APB2_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART1>;
+			resets = <&ccu RST_APB2_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART2>;
+			resets = <&ccu RST_APB2_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART3>;
+			resets = <&ccu RST_APB2_UART3>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART4>;
+			resets = <&ccu RST_APB2_UART4>;
+			dmas = <&dma 10>, <&dma 10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART5>;
+			resets = <&ccu RST_APB2_UART5>;
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB2_I2C0>;
+			resets = <&ccu RST_APB2_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB2_I2C1>;
+			resets = <&ccu RST_APB2_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB2_I2C2>;
+			resets = <&ccu RST_APB2_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@1c2b800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB2_I2C3>;
+			resets = <&ccu RST_APB2_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gmac: ethernet@1c30000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x01c30000 0x1054>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_AHB1_EMAC>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			resets = <&ccu RST_AHB1_EMAC>;
+			reset-names = "stmmaceth";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun6i-a31-crypto",
+				     "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_AHB1_SS>;
+			reset-names = "ahb";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_APB1_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		timer@1c60000 {
+			compatible = "allwinner,sun6i-a31-hstimer",
+				     "allwinner,sun7i-a20-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_HSTIMER>;
+			resets = <&ccu RST_AHB1_HSTIMER>;
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_AHB1_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c69000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c69000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_AHB1_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi2: spi@1c6a000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c6a000 0x1000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 25>, <&dma 25>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_AHB1_SPI2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi3: spi@1c6b000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c6b000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 26>, <&dma 26>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_AHB1_SPI3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun6i-a31-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_FE0>, <&ccu CLK_FE0>,
+				 <&ccu CLK_DRAM_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+
+					fe0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@1e20000 {
+			compatible = "allwinner,sun6i-a31-display-frontend";
+			reg = <0x01e20000 0x20000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_FE1>, <&ccu CLK_FE1>,
+				 <&ccu CLK_DRAM_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_FE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe1>;
+					};
+
+					fe1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@1e40000 {
+			compatible = "allwinner,sun6i-a31-display-backend";
+			reg = <0x01e40000 0x10000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_BE1>, <&ccu CLK_BE1>,
+				 <&ccu CLK_DRAM_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be1>;
+					};
+
+					be1_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be1_out_drc1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&drc1_in_be1>;
+					};
+				};
+			};
+		};
+
+		drc1: drc@1e50000 {
+			compatible = "allwinner,sun6i-a31-drc";
+			reg = <0x01e50000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_DRC1>, <&ccu CLK_IEP_DRC1>,
+				 <&ccu CLK_DRAM_DRC1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_DRC1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					drc1_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_drc1>;
+					};
+				};
+
+				drc1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					drc1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_drc1>;
+					};
+
+					drc1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_drc1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun6i-a31-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_BE0>,
+				 <&ccu CLK_DRAM_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+
+					be0_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					reg = <1>;
+
+					be0_out_drc0: endpoint {
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@1e70000 {
+			compatible = "allwinner,sun6i-a31-drc";
+			reg = <0x01e70000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>,
+				 <&ccu CLK_DRAM_DRC0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_DRC0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					reg = <0>;
+
+					drc0_in_be0: endpoint {
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+
+					drc0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_drc0>;
+					};
+				};
+			};
+		};
+
+		rtc: rtc@1f00000 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01f00000 0x54>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc32k>;
+			clock-output-names = "osc32k";
+		};
+
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prcm@1f01400 {
+			compatible = "allwinner,sun6i-a31-prcm";
+			reg = <0x01f01400 0x200>;
+
+			ar100: ar100-clk {
+				compatible = "allwinner,sun6i-a31-ar100-clk";
+				#clock-cells = <0>;
+				clocks = <&rtc CLK_OSC32K>, <&osc24M>,
+					 <&ccu CLK_PLL_PERIPH>,
+					 <&ccu CLK_PLL_PERIPH>;
+				clock-output-names = "ar100";
+			};
+
+			ahb0: ahb0-clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&ar100>;
+				clock-output-names = "ahb0";
+			};
+
+			apb0: apb0-clk {
+				compatible = "allwinner,sun6i-a31-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahb0>;
+				clock-output-names = "apb0";
+			};
+
+			apb0_gates: apb0-gates-clk {
+				compatible = "allwinner,sun6i-a31-apb0-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apb0>;
+				clock-output-names = "apb0_pio", "apb0_ir",
+						"apb0_timer", "apb0_p2wi",
+						"apb0_uart", "apb0_1wire",
+						"apb0_i2c";
+			};
+
+			ir_clk: ir-clk {
+				#clock-cells = <0>;
+				compatible = "allwinner,sun4i-a10-mod0-clk";
+				clocks = <&rtc CLK_OSC32K>, <&osc24M>;
+				clock-output-names = "ir";
+			};
+
+			apb0_rst: apb0-rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		cpucfg@1f01c00 {
+			compatible = "allwinner,sun6i-a31-cpuconfig";
+			reg = <0x01f01c00 0x300>;
+		};
+
+		ir: ir@1f02000 {
+			compatible = "allwinner,sun6i-a31-ir";
+			clocks = <&apb0_gates 1>, <&ir_clk>;
+			clock-names = "apb", "ir";
+			resets = <&apb0_rst 1>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x40>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun6i-a31-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			s_ir_rx_pin: s-ir-rx-pin {
+				pins = "PL4";
+				function = "s_ir";
+			};
+
+			s_p2wi_pins: s-p2wi-pins {
+				pins = "PL0", "PL1";
+				function = "s_p2wi";
+			};
+		};
+
+		p2wi: i2c@1f03400 {
+			compatible = "allwinner,sun6i-a31-p2wi";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>;
+			clock-frequency = <100000>;
+			resets = <&apb0_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&s_p2wi_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-colorfly-e708-q1.dts
new file mode 100644
index 000000000000..a2ef7846e2c8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-colorfly-e708-q1.dts
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sun6i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Colorfly E708 Q1 tablet";
+	compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pg";
+};
+
+&simplefb_lcd {
+	vcc-pg-supply = <&reg_dldo2>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-cs908.dts
new file mode 100644
index 000000000000..1d15e15011c6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-cs908.dts
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+
+/ {
+	model = "CSQ CS908 top set box";
+	compatible = "csq,cs908", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-inet-q972.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-inet-q972.dts
new file mode 100644
index 000000000000..c5e2c55cdc63
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-inet-q972.dts
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sun6i-reference-design-tablet.dtsi"
+
+/ {
+	model = "iNet Q972 tablet";
+	compatible = "inet-tek,inet-q972", "allwinner,sun6i-a31s";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+		touchscreen-size-x = <768>;
+		touchscreen-size-y = <1024>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-900 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <900000>;
+	};
+
+	button-1200 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
new file mode 100644
index 000000000000..b32b70ada7fd
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
@@ -0,0 +1,267 @@
+/*
+ * Copyright 2014 Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ * Copyright 2015 Karsten Merker <merker@debian.org>
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "MSI Primo81 tablet";
+	compatible = "msi,primo81", "allwinner,sun6i-a31s";
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	/* rtl8188etv wifi is connected here */
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	/* pull-ups and device VDDIO use AXP221 DLDO3 */
+	status = "failed";
+};
+
+&i2c1 {
+	status = "okay";
+
+	ctp@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+		touchscreen-swapped-x-y;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	accelerometer@1c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mma8452_int_primo81>;
+		compatible = "fsl,mma8452";
+		reg = <0x1c>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-158 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button-349 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&pio {
+	mma8452_int_primo81: mma8452-int-pin {
+		pins = "PA9";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-mipi-bridge";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+	vdd-mipi-bridge-supply = <&reg_eldo3>;
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_dldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s-core.dtsi
new file mode 100644
index 000000000000..227ad489731c
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s-core.dtsi
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sinlinx SinA31s Core Board";
+	compatible = "sinlinx,sina31s", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+/* eMMC on core board */
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+/* AXP221s PMIC on core board */
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+/* UART0 pads available on core board */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s.dts
new file mode 100644
index 000000000000..56956352914d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s.dts
@@ -0,0 +1,195 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The SinA31s development board has the SinA31s core board soldered on */
+#include "sun6i-a31s-sina31s-core.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Sinlinx SinA31s Development Board";
+	compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "sina31s:status:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",	"MBIAS";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	/* USB 2.0 4 port hub IC */
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-158 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button-349 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-gmac-phy";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
new file mode 100644
index 000000000000..f63d67ec9887
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -0,0 +1,334 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sinovoip BPI-M2";
+	compatible = "sinovoip,bpi-m2", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bpi-m2:blue:usr";
+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		};
+
+		led-1 {
+			label = "bpi-m2:green:usr";
+			gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+		};
+
+		led-2 {
+			label = "bpi-m2:red:usr";
+			gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */
+		};
+	};
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>; /* PA21 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-gmac";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vdd-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-mac";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pb";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-csi";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pm-cpus";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&pio {
+	gpio-line-names =
+		/* PA */
+		"ETXD0", "ETXD1", "ETXD2", "ETXD3", "SDC0-DET", "", "",
+		"", "ETXCLK", "ETXEN", "EGTXCLK", "ERXD0", "ERXD1",
+		"ERXD2", "ERXD3", "", "", "", "", "ERXDV", "ERXCK",
+		"ETXERR", "ERXERR", "ECOL", "ECRS", "ECLKIN", "EMDC",
+		"EMDIO", "", "", "", "",
+
+		/* PB */
+		"CN7-P29", "CN7-P31", "CN7-P33", "CN7-P35", "CN7-P37",
+		"CN7-P28", "CN7-P27", "CN7-P32", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "",
+
+		/* PC */
+		"", "", "", "", "", "", "WL-SDIO-CMD", "WL-SDIO-CLK",
+		"WL-SDIO-D0", "WL-SDIO-D2", "WL-SDIO-D2", "WL-SDIO-D3",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "USB-DRV", "", "", "", "",
+
+		/* PD */
+		"CN9-P09", "CN9-P11", "CN9-P13", "CN9-P15", "CN9-P17",
+		"CN9-P19", "CN9-P21", "CN9-P23", "CN9-P25", "CN9-P27",
+		"CN9-P29", "CN9-P31", "CN9-P33", "CN9-P35", "CN9-P37",
+		"CN9-P39", "CN9-P40", "CN9-P38", "CN9-P36", "CN9-P34",
+		"CN9-P32", "CN9-P30", "CN9-P28", "CN9-P26", "CN9-P22",
+		"CN9-P14", "CN9-P18", "CN9-P16", "", "", "", "",
+
+		/* PE */
+		"CN6-P20", "CN6-P24", "CN6-P30", "CN6-P28", "CN7-P08",
+		"CN7-P10", "CN7-P36", "CN7-P38", "CN6-P17", "CN6-P19",
+		"CN6-P21", "CN6-P23", "CN6-P25", "CN6-P27", "CN6-P29",
+		"CN6-P31", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "",
+
+		/* PF */
+		"SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
+		"SDC0-D2", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"",
+
+		/* PG */
+		"CN9-P06", "CN9-P08", "CN9-P20", "CN9-P12", "CN9-P07",
+		"LED-PWR", "CN7-P13", "CN7-P11", "CN7-P22", "CN7-P15",
+		"LED-G", "LED-B", "CN7-P26", "CN7-P24", "CN7-P23",
+		"CN7-P19", "CN7-P21", "HCEC", "CN6-P22", "", "", "", "",
+		"", "", "", "", "", "", "", "", "",
+
+		/* PH */
+		"", "", "", "", "", "", "", "", "", "CN7-P07",
+		"CN7-P12", "CN7-P16", "CN7-P18", "CN9-P10", "CN6-P16",
+		"CN6-P14", "CN9-P04", "CN9-P02", "CN7-P05", "CN7-P03",
+		"CN8-P03", "CN8-P02", "", "", "CN6-P34", "CN6-P32",
+		"CN6-P26", "CN6-P18", "", "", "", "";
+};
+
+&r_pio {
+	gpio-line-names =
+		/* PL */
+		"PMU-SCK", "PMU-SDA", "VBAT-EN", "", "IR-RX",
+		"WL-WAKE-HOST", "BT-WAKE_HOST", "BT-ENABLE",
+		"WL-PMU-EN", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "",
+
+		/* PM */
+		"CN6-P12", "CN6-P35", "CN7-P40", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-yones-toptech-bs1078-v2.dts
new file mode 100644
index 000000000000..0b61f5368d44
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2015 Lawrence Yu <lyu@micile.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Yones TopTech BS1078 v2 Tablet";
+	compatible = "yones-toptech,bs1078-v2", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd-usb2";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+/* Voltage source for I2C pullup resistors for I2C Bus 0 */
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+	usb2_vbus-supply = <&reg_dc1sw>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31s.dtsi
new file mode 100644
index 000000000000..97e2c51d0aea
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s.dtsi
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The A31s is the same die as the A31 in a different package, this is
+ * reflected by it having different pinctrl compatible everything else is
+ * identical.
+ */
+
+#include "sun6i-a31.dtsi"
+
+&de {
+	compatible = "allwinner,sun6i-a31s-display-engine";
+};
+
+&pio {
+	compatible = "allwinner,sun6i-a31s-pinctrl";
+};
+
+&tcon0 {
+	compatible = "allwinner,sun6i-a31s-tcon";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun6i-reference-design-tablet.dtsi
new file mode 100644
index 000000000000..f38d19c6be8c
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-reference-design-tablet.dtsi
@@ -0,0 +1,173 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	/* Wifi is connected here */
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 0 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA15 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_dldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts
new file mode 100644
index 000000000000..f2d7fab9978d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts
@@ -0,0 +1,264 @@
+/*
+ * Copyright 2016 Luo Yi <luoyi.ly@gmail.com>
+ *
+ * Thanks to the original work by Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Banana Pi BPI-M1-Plus";
+	compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bananapi-m1-plus:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "bananapi-m1-plus:pwr:usr";
+			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc3_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&mmc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	/* VBUS on usb host ports are tied to DC5V and therefore always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
new file mode 100644
index 000000000000..d8b362c9661a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
@@ -0,0 +1,360 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "LeMaker Banana Pi";
+	compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart3;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "bananapi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+	operating-points =
+		/* kHz	  uV */
+		<960000	1400000>,
+		<912000	1400000>,
+		<864000	1350000>,
+		<720000	1250000>,
+		<528000	1150000>,
+		<312000	1100000>,
+		<144000	1050000>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+		};
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+	gpio-line-names =
+		/* PA */
+		"ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3",
+			"ETXD2", "ETXD1", "ETXD0",
+		"ERXCK", "ERXERR", "ERXDV", "EMDC", "EMDIO",
+			"ETXEN", "ETXCK", "ECRS",
+		"ECOL", "ETXERR", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PB */
+		"PMU-SCK", "PMU-SDA", "", "", "", "", "", "",
+		"", "USB0-DRV", "", "", "", "", "", "",
+		"", "", "", "", "SCL", "SDA", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PC */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PD */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PE */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PF */
+		"SD0-D1", "SD0-D0", "SD0-CLK", "SD0-CMD", "SD0-D3",
+			"SD0-D2", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PG */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PH */
+		"TXD0", "RXD0", "IO-1", "PH3", "USB0-IDDET", "PH5", "", "",
+		"", "", "SD0-DET", "", "", "", "", "",
+		"", "", "", "", "IO-4", "IO-5", "", "EMAC-PWR-EN",
+		"LED1", "", "", "", "", "", "", "",
+		/* PI */
+		"", "", "", "IO-GCLK", "", "", "", "",
+		"", "", "SPI-CE0", "SPI-CLK", "SPI-MOSI",
+			"SPI-MISO", "SPI-CE1", "",
+		"IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>,
+		    <&spi0_cs1_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapro.dts
new file mode 100644
index 000000000000..e22f0e8bb17a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapro.dts
@@ -0,0 +1,219 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "LeMaker Banana Pro";
+	compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bananapro:blue:usr";
+			gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "bananapro:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>,
+		    <&spi0_cs1_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-cubieboard2.dts
new file mode 100644
index 000000000000..e35e6990c4b2
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-cubieboard2.dts
@@ -0,0 +1,237 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Cubietech Cubieboard2";
+	compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "cubieboard2:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "cubieboard2:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts
new file mode 100644
index 000000000000..be9b31d0f4b5
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts
@@ -0,0 +1,345 @@
+/*
+ * Copyright 2013 Oliver Schinagl
+ *
+ * Oliver Schinagl <oliver@schinagl.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Cubietech Cubietruck";
+	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "cubietruck:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "cubietruck:orange:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "cubietruck:white:usr";
+			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "cubietruck:green:usr";
+			gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	mmc3_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
+		clocks = <&ccu CLK_OUT_A>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	/* Pin outputs low power clock for WiFi and BT */
+	pinctrl-0 = <&clk_out_a_pin>;
+	pinctrl-names = "default";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>;
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm20702a1";
+		clocks = <&ccu CLK_OUT_A>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
+		host-wakeup-gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
+		shutdown-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
+		max-speed = <1500000>;
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
+	usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-haoyu-marsboard.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-haoyu-marsboard.dts
new file mode 100644
index 000000000000..097e479c2772
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-haoyu-marsboard.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Conley Lee
+ * Conley Lee <conleylee@foxmail.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "HAOYU Electronics Marsboard A20";
+	compatible = "haoyu,a20-marsboard", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+	phy-handle = <&phy0>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	gmac_txerr: gmac-txerr-pin {
+		pins = "PA17";
+		function = "gmac";
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts
new file mode 100644
index 000000000000..f1e26b75cd90
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts
@@ -0,0 +1,233 @@
+/*
+ * Copyright 2013 Wills Wang
+ *
+ * Wills Wang <wills.wang.open@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Merrii A20 Hummingbird";
+	compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_mmc3_vdd: regulator-mmc3-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc3_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	};
+
+	reg_gmac_vdd: regulator-gmac-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_vdd>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+		reset-assert-us = <10000>;
+		/* wait 1s after reset, otherwise fail to read phy id */
+		reset-deassert-us = <1000000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_mmc3_vdd>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pb_pins>,
+		    <&spi2_cs0_pb_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pg_pins>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pi_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-i12-tvbox.dts
new file mode 100644
index 000000000000..b21ddd0ec1c2
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-i12-tvbox.dts
@@ -0,0 +1,198 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "I12 / Q5 / QT840A A20 tvbox";
+	compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "i12_tvbox:red:usr";
+			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			label = "i12_tvbox:blue:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vmmc3: vmmc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vmmc3_io: vmmc3-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc3-io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* This controls VCC-PI, must be always on! */
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		enable-active-high;
+		gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vmmc3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts
new file mode 100644
index 000000000000..577ead1d02a0
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2023 In-Circuit GmbH
+
+/dts-v1/;
+
+#include "sun7i-a20-icnova-a20.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "In-Circuit ICnova A20 ADB4006";
+	compatible = "incircuit,icnova-a20-adb4006", "incircuit,icnova-a20",
+		     "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
+			default-state = "on";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi
new file mode 100644
index 000000000000..46616c6bc899
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2023 In-Circuit GmbH
+
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-swac.dts
new file mode 100644
index 000000000000..413505f45a81
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-swac.dts
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2015 Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "ICnova-A20 SWAC";
+	compatible = "incircuit,icnova-a20-swac", "incircuit,icnova-a20",
+		     "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 5 GPIO_ACTIVE_LOW>; /* PI5 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-ibox.dts
new file mode 100644
index 000000000000..8ff83016ff5a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-ibox.dts
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-itead-core-common.dtsi"
+
+/ {
+	model = "Itead Ibox A20";
+	compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_itead_core>;
+
+		led-0 {
+			label = "itead_core:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "itead_core:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	axp209: pmic@34 {
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&pio {
+	led_pins_itead_core: led-pins {
+		pins = "PH20","PH21";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-lamobo-r1.dts
new file mode 100644
index 000000000000..97518afe4658
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-lamobo-r1.dts
@@ -0,0 +1,320 @@
+/*
+ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Lamobo R1";
+	compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart3;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "lamobo_r1:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch: ethernet-switch@1e {
+			compatible = "brcm,bcm53125";
+			reg = <30>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port0: port@0 {
+					reg = <0>;
+					label = "lan2";
+				};
+
+				port1: port@1 {
+					reg = <1>;
+					label = "lan3";
+				};
+
+				port2: port@2 {
+					reg = <2>;
+					label = "lan4";
+				};
+
+				port3: port@3 {
+					reg = <3>;
+					label = "wan";
+				};
+
+				port4: port@4 {
+					reg = <4>;
+					label = "lan1";
+				};
+
+				port8: port@8 {
+					reg = <8>;
+					label = "cpu";
+					ethernet = <&gmac>;
+					phy-mode = "rgmii-txid";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>,
+		    <&spi0_cs1_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-linutronix-testbox-v2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-linutronix-testbox-v2.dts
new file mode 100644
index 000000000000..da5a2eea4ce3
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-linutronix-testbox-v2.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2020 Linutronix GmbH
+ * Author: Benedikt Spranger <b.spranger@linutronix.de>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-lamobo-r1.dts"
+
+/ {
+	model = "Lamobo R1";
+	compatible = "linutronix,testbox-v2", "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+	leds {
+		led-opto1 {
+			label = "lamobo_r1:opto:powerswitch";
+			gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-opto2 {
+			label = "lamobo_r1:opto:relay";
+			gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		status = "okay";
+	};
+
+	atecc508a@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can_ph_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-m3.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-m3.dts
new file mode 100644
index 000000000000..f161d5238860
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-m3.dts
@@ -0,0 +1,156 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Mele M3";
+	compatible = "mele,m3", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "m3:blue:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-mk808c.dts
new file mode 100644
index 000000000000..1491c603f661
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-mk808c.dts
@@ -0,0 +1,184 @@
+/*
+ * Copyright 2015 Marcus Cooper
+ *
+ * Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "mk808c";
+	compatible = "allwinner,mk808c", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+	remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
new file mode 100644
index 000000000000..fb835730bbc4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-Olimex-SOM-EVB-eMMC Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-olimex-som-evb.dts"
+
+/ {
+
+	model = "Olimex A20-Olimex-SOM-EVB-eMMC";
+	compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb.dts
new file mode 100644
index 000000000000..f05ee32bc9cb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb.dts
@@ -0,0 +1,329 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ * Copyright 2015 - Karsten Merker <merker@debian.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Olimex A20-Olimex-SOM-EVB";
+	compatible = "olimex,a20-olimex-som-evb", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "a20-olimex-som-evb:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&codec {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button-390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button-600 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-980 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <980000>;
+	};
+
+	button-1180 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1180000>;
+	};
+
+	button-1400 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1400000>;
+	};
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 0 GPIO_ACTIVE_LOW>; /* PH0 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olimex_som_evb: led-pins {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pi_pins>,
+		    <&spi1_cs0_pi_pin>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pc_pins>,
+		    <&spi2_cs0_pc_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6_pi_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
new file mode 100644
index 000000000000..e8977c2fe798
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-SOM204-EVB-eMMC Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-olimex-som204-evb.dts"
+
+/ {
+	model = "Olimex A20-SOM204-EVB-eMMC";
+	compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq-1 {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts
new file mode 100644
index 000000000000..a55406657449
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-SOM204-EVB Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Olimex A20-SOM204-EVB";
+	compatible = "olimex,a20-olimex-som204-evb", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+		serial2 = &uart7;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		ethernet1 = &rtl8723bs;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "a20-som204-evb:green:stat";
+			gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "a20-som204-evb:green:led1";
+			gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-2 {
+			label = "a20-som204-evb:yellow:led2";
+			gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	rtl_pwrseq: pwrseq-0 {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can_ph_pins>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy3>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* Exposed to UEXT1 */
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/* Exposed to UEXT2 */
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+		reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+		reset-assert-us = <10000>;
+		/* wait 1s after reset, otherwise fail to read phy id */
+		reset-deassert-us = <1000000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&rtl_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	uart3_rts_pin: uart3-rts-pin {
+		pins = "PG8";
+		function = "uart3";
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1300000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pg";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+/* Exposed to UEXT1 */
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pi_pins>,
+		    <&spi1_cs0_pi_pin>;
+	status = "okay";
+};
+
+/* Exposed to UEXT2 */
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pc_pins>,
+		    <&spi2_cs0_pc_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* Used for RTL8723BS bluetooth */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_pin>;
+	status = "okay";
+};
+
+/* Exposed to UEXT1 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pg_pins>;
+	status = "okay";
+};
+
+/* Exposed to UEXT2 */
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime-emmc.dts
new file mode 100644
index 000000000000..033cab3443f8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime-emmc.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+#include "sun7i-a20-olinuxino-lime.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME-eMMC";
+	compatible = "olimex,a20-olinuxino-lime-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime.dts
new file mode 100644
index 000000000000..92938d022295
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime.dts
@@ -0,0 +1,216 @@
+/*
+ * This is based on sun4i-a10-olinuxino-lime.dts
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ * Copyright (c) 2014 FUKAUMI Naoki <naobsd@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME";
+	compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		led {
+			label = "a20-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxinolime: led-pins {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2-emmc.dts
new file mode 100644
index 000000000000..decb014a382b
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2-emmc.dts
@@ -0,0 +1,69 @@
+ /*
+ * Copyright 2015 - Ultimaker B.V.
+ * Author Olliver Schinagl <oliver@schinagl.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun7i-a20-olinuxino-lime2.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME2-eMMC";
+	compatible = "olimex,a20-olinuxino-lime2-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts
new file mode 100644
index 000000000000..435a189332e8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts
@@ -0,0 +1,280 @@
+/*
+ * Copyright 2014 - Iain Paton <ipaton0@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME2";
+	compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		led {
+			label = "a20-olinuxino-lime2:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_axp_ipsout: regulator-axp-ipsout {
+		compatible = "regulator-fixed";
+		regulator-name = "axp-ipsout";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_ldo3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_ldo4>;
+
+	led_pins_olinuxinolime: led-pins {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1300000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi0";
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi1";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro-emmc.dts
new file mode 100644
index 000000000000..2337b44a88aa
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro-emmc.dts
@@ -0,0 +1,68 @@
+ /*
+ * Copyright 2017 Olimex Ltd.
+ * Stefan Mavrodiev <stefan@olimex.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun7i-a20-olinuxino-micro.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-MICRO-eMMC";
+	compatible = "olimex,a20-olinuxino-micro-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
new file mode 100644
index 000000000000..a1b89b2a2999
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
@@ -0,0 +1,354 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Olimex A20-Olinuxino Micro";
+	compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart6;
+		serial2 = &uart7;
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		led {
+			label = "a20-olinuxino-micro:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
+
+	button-392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
+
+	button-601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
+
+	button-795 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button-987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+
+	button-1184 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1184678>;
+	};
+
+	button-1398 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1398804>;
+	};
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	gmac_txerr: gmac-txerr-pin {
+		pins = "PA17";
+		function = "gmac";
+	};
+
+	led_pins_olinuxino: led-pins {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pi_pins>,
+		    <&spi1_cs0_pi_pin>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pc_pins>,
+		    <&spi2_cs0_pc_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6_pi_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi-mini.dts
new file mode 100644
index 000000000000..84efa01e7cba
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi-mini.dts
@@ -0,0 +1,242 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Orange Pi Mini";
+	compatible = "xunlong,orangepi-mini", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+		};
+
+		led-1 {
+			label = "orangepi:blue:usr";
+			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi.dts
new file mode 100644
index 000000000000..5d77f1d9818f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi.dts
@@ -0,0 +1,201 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Orange Pi";
+	compatible = "xunlong,orangepi", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "orangepi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3-nano.dts
new file mode 100644
index 000000000000..e40ecb48d726
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3-nano.dts
@@ -0,0 +1,225 @@
+/*
+ * Copyright 2015-2020 Adam Sampson <ats@offog.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "LinkSprite pcDuino3 Nano";
+	compatible = "linksprite,pcduino3-nano", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-3 {
+			label = "pcduino3-nano:green:usr1";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
+		};
+
+		led-4 {
+			label = "pcduino3-nano:green:usr2";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+/* A single regulator (U24) powers both USB host ports. */
+&reg_usb1_vbus {
+	gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3.dts
new file mode 100644
index 000000000000..928b86a95f34
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3.dts
@@ -0,0 +1,227 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "LinkSprite pcDuino3";
+	compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "pcduino3:green:tx";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			label = "pcduino3:green:rx";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-back {
+			label = "Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+		};
+
+		key-home {
+			label = "Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+		};
+
+		key-menu {
+			label = "Key Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-wexler-tab7200.dts
new file mode 100644
index 000000000000..fef02fcbbdf8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-wexler-tab7200.dts
@@ -0,0 +1,225 @@
+/*
+ * Copyright 2015 Aleksei Mamlin
+ * Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Wexler TAB7200";
+	compatible = "wexler,tab7200", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	gt911: touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
+		irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */
+		reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */
+		touchscreen-swapped-x-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-571 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <571428>;
+	};
+
+	button-761 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <761904>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
new file mode 100644
index 000000000000..29199b6a3b4a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Wits Pro A20 DKT";
+	compatible = "wits,pro-a20-dkt", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	mmc3_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi b/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi
new file mode 100644
index 000000000000..5f44f09c5545
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi
@@ -0,0 +1,1710 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/clock/sun7i-a20-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &gmac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>,
+				 <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+
+		framebuffer-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-lcd0-tve0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-tve0";
+			clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_AHB_DE_BE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH1>,
+				 <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<960000	1400000>,
+				<912000	1400000>,
+				<864000	1300000>,
+				<720000	1200000>,
+				<528000	1100000>,
+				<312000	1000000>,
+				<144000	1000000>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<960000	1400000>,
+				<912000	1400000>,
+				<864000	1300000>,
+				<720000	1200000>,
+				<528000	1100000>,
+				<312000	1000000>,
+				<144000	1000000>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu-alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		default-pool {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
+		 */
+		mii_phy_tx_clk: clk-mii-phy-tx {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: clk-gmac-int-tx {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@1c20164 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x01c20164 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+	};
+
+
+	de: display-engine {
+		compatible = "allwinner,sun7i-a20-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun7i-a20-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@0 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun7i-a20-sram-a3-a4",
+						     "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
+			};
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,sun7i-a20-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun7i-a20-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		nmi_intc: interrupt-controller@1c00030 {
+			compatible = "allwinner,sun7i-a20-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c00030 0x0c>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DMA>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand-controller@1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <4>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+		};
+
+		csi0: csi@1c09000 {
+			compatible = "allwinner,sun7i-a20-csi0";
+			reg = <0x01c09000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "isp", "ram";
+			resets = <&ccu RST_CSI0>;
+			status = "disabled";
+		};
+
+		emac: ethernet@1c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_EMAC>;
+			allwinner,sram = <&emac_sram 1>;
+			status = "disabled";
+		};
+
+		mdio: mdio@1c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun7i-a20-tcon0",
+				     "allwinner,sun7i-a20-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>;
+			reset-names = "lcd", "lvds";
+			clocks = <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_TCON0_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+
+					tcon0_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun7i-a20-tcon1",
+				     "allwinner,sun7i-a20-tcon";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_TCON1>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD1>,
+				 <&ccu CLK_TCON1_CH0>,
+				 <&ccu CLK_TCON1_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon1-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 15>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon1>;
+					};
+
+					tcon1_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun7i-a20-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_VE>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC3>,
+				 <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc3_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_AHB_OTG>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun7i-a20-usb-phy";
+			reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
+			reg-names = "phy_ctrl", "pmu1", "pmu2";
+			clocks = <&ccu CLK_USB_PHY>;
+			clock-names = "usb_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@1c14000 {
+			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c14400 {
+			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun7i-a20-crypto",
+				     "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+		};
+
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun7i-a20-hdmi",
+				     "allwinner,sun5i-a10s-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "pll-0", "pll-1";
+			dmas = <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_DEDICATED 24>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+
+					hdmi_in_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun4i-a10-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1c000 {
+			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1c400 {
+			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		csi1: csi@1c1d000 {
+			compatible = "allwinner,sun7i-a20-csi1",
+				     "allwinner,sun4i-a10-csi1";
+			reg = <0x01c1d000 0x1000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "ram";
+			resets = <&ccu RST_CSI1>;
+			status = "disabled";
+		};
+
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+			       <&dma SUN4I_DMA_DEDICATED 30>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun7i-a20-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun7i-a20-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			/omit-if-no-ref/
+			can_pa_pins: can-pa-pins {
+				pins = "PA16", "PA17";
+				function = "can";
+			};
+
+			/omit-if-no-ref/
+			can_ph_pins: can-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			/omit-if-no-ref/
+			clk_out_a_pin: clk-out-a-pin {
+				pins = "PI12";
+				function = "clk_out_a";
+			};
+
+			/omit-if-no-ref/
+			clk_out_b_pin: clk-out-b-pin {
+				pins = "PI13";
+				function = "clk_out_b";
+			};
+
+			/omit-if-no-ref/
+			csi0_8bits_pins: csi-8bits-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi0_clk_pin: csi-clk-pin {
+				pins = "PE1";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+				pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+				       "PG6", "PG7", "PG8", "PG9", "PG10",
+				       "PG11";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH8", "PH9",
+				       "PH10", "PH11", "PH12", "PH13", "PH14",
+				       "PH15", "PH16", "PH17", "PH18", "PH19",
+				       "PH20", "PH21", "PH22", "PH23", "PH24",
+				       "PH25", "PH26", "PH27";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_clk_pg_pin: csi1-clk-pg-pin {
+				pins = "PG1";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			emac_pa_pins: emac-pa-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				       "PA7", "PA8", "PA9", "PA10",
+				       "PA11", "PA12", "PA13", "PA14",
+				       "PA15", "PA16";
+				function = "emac";
+			};
+
+			/omit-if-no-ref/
+			emac_ph_pins: emac-ph-pins {
+				pins = "PH8", "PH9", "PH10", "PH11",
+				       "PH14", "PH15", "PH16", "PH17",
+				       "PH18", "PH19", "PH20", "PH21",
+				       "PH22", "PH23", "PH24", "PH25",
+				       "PH26";
+				function = "emac";
+			};
+
+			/omit-if-no-ref/
+			gmac_mii_pins: gmac-mii-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				       "PA7", "PA8", "PA9", "PA10",
+				       "PA11", "PA12", "PA13", "PA14",
+				       "PA15", "PA16";
+				function = "gmac";
+			};
+
+			/omit-if-no-ref/
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				        "PA7", "PA8", "PA10",
+				       "PA11", "PA12", "PA13",
+				       "PA15", "PA16";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			/omit-if-no-ref/
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			/omit-if-no-ref/
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			/omit-if-no-ref/
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			/omit-if-no-ref/
+			i2c3_pins: i2c3-pins {
+				pins = "PI0", "PI1";
+				function = "i2c3";
+			};
+
+			/omit-if-no-ref/
+			ir0_rx_pin: ir0-rx-pin {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			/omit-if-no-ref/
+			ir0_tx_pin: ir0-tx-pin {
+				pins = "PB3";
+				function = "ir0";
+			};
+
+			/omit-if-no-ref/
+			ir1_rx_pin: ir1-rx-pin {
+				pins = "PB23";
+				function = "ir1";
+			};
+
+			/omit-if-no-ref/
+			ir1_tx_pin: ir1-tx-pin {
+				pins = "PB22";
+				function = "ir1";
+			};
+
+			/omit-if-no-ref/
+			lcd_lvds0_pins: lcd-lvds0-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD6", "PD7", "PD8", "PD9";
+				function = "lvds0";
+			};
+
+			/omit-if-no-ref/
+			lcd_lvds1_pins: lcd-lvds1-pins {
+				pins = "PD10", "PD11", "PD12", "PD13", "PD14",
+				       "PD15", "PD16", "PD17", "PD18", "PD19";
+				function = "lvds1";
+			};
+
+			/omit-if-no-ref/
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc2_pins: mmc2-pins {
+				pins = "PC6", "PC7", "PC8",
+				       "PC9", "PC10", "PC11";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc3_pins: mmc3-pins {
+				pins = "PI4", "PI5", "PI6",
+				       "PI7", "PI8", "PI9";
+				function = "mmc3";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			ps2_0_pins: ps2-0-pins {
+				pins = "PI20", "PI21";
+				function = "ps2";
+			};
+
+			/omit-if-no-ref/
+			ps2_1_ph_pins: ps2-1-ph-pins {
+				pins = "PH12", "PH13";
+				function = "ps2";
+			};
+
+			/omit-if-no-ref/
+			pwm0_pin: pwm0-pin {
+				pins = "PB2";
+				function = "pwm";
+			};
+
+			/omit-if-no-ref/
+			pwm1_pin: pwm1-pin {
+				pins = "PI3";
+				function = "pwm";
+			};
+
+			/omit-if-no-ref/
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PB13";
+				function = "spdif";
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			spi0_pi_pins: spi0-pi-pins {
+				pins = "PI11", "PI12", "PI13";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs0_pi_pin: spi0-cs0-pi-pin {
+				pins = "PI10";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs1_pi_pin: spi0-cs1-pi-pin {
+				pins = "PI14";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pi_pins: spi1-pi-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs0_pi_pin: spi1-cs0-pi-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi2_pb_pins: spi2-pb-pins {
+				pins = "PB15", "PB16", "PB17";
+				function = "spi2";
+			};
+
+			/omit-if-no-ref/
+			spi2_cs0_pb_pin: spi2-cs0-pb-pin {
+				pins = "PB14";
+				function = "spi2";
+			};
+
+			/omit-if-no-ref/
+			spi2_pc_pins: spi2-pc-pins {
+				pins = "PC20", "PC21", "PC22";
+				function = "spi2";
+			};
+
+			/omit-if-no-ref/
+			spi2_cs0_pc_pin: spi2-cs0-pc-pin {
+				pins = "PC19";
+				function = "spi2";
+			};
+
+			/omit-if-no-ref/
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pa_pins: uart1-pa-pins {
+				pins = "PA10", "PA11";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart1_cts_rts_pa_pins: uart1-cts-rts-pa-pins {
+				pins = "PA12", "PA13";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart2_pa_pins: uart2-pa-pins {
+				pins = "PA2", "PA3";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_cts_rts_pa_pins: uart2-cts-rts-pa-pins {
+				pins = "PA0", "PA1";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_pi_pins: uart2-pi-pins {
+				pins = "PI18", "PI19";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins {
+				pins = "PI16", "PI17";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart3_pg_pins: uart3-pg-pins {
+				pins = "PG6", "PG7";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
+				pins = "PG8", "PG9";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart3_ph_pins: uart3-ph-pins {
+				pins = "PH0", "PH1";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart3_cts_rts_ph_pins: uart3-cts-rts-ph-pins {
+				pins = "PH2", "PH3";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart4_pg_pins: uart4-pg-pins {
+				pins = "PG10", "PG11";
+				function = "uart4";
+			};
+
+			/omit-if-no-ref/
+			uart4_ph_pins: uart4-ph-pins {
+				pins = "PH4", "PH5";
+				function = "uart4";
+			};
+
+			/omit-if-no-ref/
+			uart5_ph_pins: uart5-ph-pins {
+				pins = "PH6", "PH7";
+				function = "uart5";
+			};
+
+			/omit-if-no-ref/
+			uart5_pi_pins: uart5-pi-pins {
+				pins = "PI10", "PI11";
+				function = "uart5";
+			};
+
+			/omit-if-no-ref/
+			uart6_pa_pins: uart6-pa-pins {
+				pins = "PA12", "PA13";
+				function = "uart6";
+			};
+
+			/omit-if-no-ref/
+			uart6_pi_pins: uart6-pi-pins {
+				pins = "PI12", "PI13";
+				function = "uart6";
+			};
+
+			/omit-if-no-ref/
+			uart7_pa_pins: uart7-pa-pins {
+				pins = "PA14", "PA15";
+				function = "uart7";
+			};
+
+			/omit-if-no-ref/
+			uart7_pi_pins: uart7-pi-pins {
+				pins = "PI20", "PI21";
+				function = "uart7";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		rtc: rtc@1c20d00 {
+			compatible = "allwinner,sun7i-a20-rtc";
+			reg = <0x01c20d00 0x20>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun7i-a20-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir@1c21c00 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c21c00 0x40>;
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 4>,
+			       <&dma SUN4I_DMA_NORMAL 4>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun7i-a20-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sid: eeprom@1c23800 {
+			compatible = "allwinner,sun7i-a20-sid";
+			reg = <0x01c23800 0x200>;
+		};
+
+		i2s2: i2s@1c24400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c24400 0x400>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 6>,
+			       <&dma SUN4I_DMA_NORMAL 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun5i-a13-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@1c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@1c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART7>;
+			status = "disabled";
+		};
+
+		ps20: ps2@1c2a000 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a000 0x400>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_PS20>;
+			status = "disabled";
+		};
+
+		ps21: ps2@1c2a400 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a400 0x400>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_PS21>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@1c2b800 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun7i-a20-can",
+				     "allwinner,sun4i-a10-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_CAN>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@1c2c000 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2c000 0x400>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun7i-a20-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_GPU>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		gmac: ethernet@1c50000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x01c50000 0x10000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+
+			gmac_mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		hstimer@1c60000 {
+			compatible = "allwinner,sun7i-a20-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_HSTIMER>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun7i-a20-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_DRAM_DE_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+
+					fe0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@1e20000 {
+			compatible = "allwinner,sun7i-a20-display-frontend";
+			reg = <0x01e20000 0x20000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
+				 <&ccu CLK_DRAM_DE_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe1>;
+					};
+
+					fe1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@1e40000 {
+			compatible = "allwinner,sun7i-a20-display-backend";
+			reg = <0x01e40000 0x10000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
+				 <&ccu CLK_DRAM_DE_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be1>;
+					};
+
+					be1_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be1>;
+					};
+
+					be1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun7i-a20-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_DRAM_DE_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+
+					be0_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+
+					be0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi
new file mode 100644
index 000000000000..2af8382ccdf5
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi
@@ -0,0 +1,855 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
+#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		simplefb_lcd: framebuffer-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_BUS_LCD>, <&ccu CLK_BUS_DE_BE>,
+				 <&ccu CLK_LCD_CH0>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_DRC>;
+			status = "disabled";
+		};
+	};
+
+	de: display-engine {
+		/* compatible gets set in SoC specific dtsi file */
+		allwinner,pipelines = <&fe0>;
+		status = "disabled";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	cpus {
+		enable-method = "allwinner,sun8i-a23";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		ext_osc32k: ext-osc32k-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext-osc32k";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun8i-a23-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0x80000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0x80000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-a23-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-a23-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		nfc: nand-controller@1c03000 {
+			compatible = "allwinner,sun8i-a23-nand-controller";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_NAND>;
+			reset-names = "ahb";
+			dmas = <&dma 5>;
+			dma-names = "rxtx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma 12>;
+			clocks = <&ccu CLK_BUS_LCD>,
+				 <&ccu CLK_LCD_CH0>,
+				 <&ccu 13>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "lvds-alt";
+			clock-output-names = "tcon-data-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_LCD>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint {
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c19000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			/*
+			 * compatible and address regions get set in
+			 * SoC specific dtsi file
+			 */
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI>;
+			resets = <&ccu RST_BUS_EHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
+			resets = <&ccu RST_BUS_OHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c20800 0x400>;
+			interrupt-parent = <&r_intc>;
+			/* interrupts get set in SoC specific dtsi file */
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			i2c0_pins: i2c0-pins {
+				pins = "PH2", "PH3";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH4", "PH5";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PE12", "PE13";
+				function = "i2c2";
+			};
+
+			lcd_rgb666_pins: lcd-rgb666-pins {
+				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				       "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+				       "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pg_pins: mmc1-pg-pins {
+				pins = "PG0", "PG1", "PG2",
+				       "PG3", "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC5", "PC6", "PC8",
+				       "PC9", "PC10", "PC11",
+				       "PC12", "PC13", "PC14",
+				       "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			nand_pins: nand-pins {
+				pins = "PC0", "PC1", "PC2", "PC5",
+				       "PC8", "PC9", "PC10", "PC11",
+				       "PC12", "PC13", "PC14", "PC15";
+				function = "nand0";
+			};
+
+			nand_cs0_pin: nand-cs0-pin {
+				pins = "PC4";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_cs1_pin: nand-cs1-pin {
+				pins = "PC3";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_rb0_pin: nand-rb0-pin {
+				pins = "PC6";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_rb1_pin: nand-rb1-pin {
+				pins = "PC7";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			pwm0_pin: pwm0-pin {
+				pins = "PH0";
+				function = "pwm0";
+			};
+
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			uart1_pg_pins: uart1-pg-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_cts_rts_pg_pins: uart1-cts-rts-pg-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-a23-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21400 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			dmas = <&dma 10>, <&dma 10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-a23-mali",
+				     "allwinner,sun7i-a20-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+			#cooling-cells = <2>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
+				 <&ccu CLK_DRAM_DE_FE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_BUS_DE_FE>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					reg = <1>;
+
+					fe0_out_be0: endpoint {
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01e60000 0x10000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_BUS_DE_BE>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					reg = <0>;
+
+					be0_in_fe0: endpoint {
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					reg = <1>;
+
+					be0_out_drc0: endpoint {
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@1e70000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01e70000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
+				 <&ccu CLK_DRAM_DRC>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_DRC>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					reg = <0>;
+
+					drc0_in_be0: endpoint {
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
+		};
+
+		rtc: rtc@1f00000 {
+			compatible = "allwinner,sun8i-a23-rtc";
+			reg = <0x01f00000 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out";
+			clocks = <&ext_osc32k>;
+			#clock-cells = <1>;
+		};
+
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prcm@1f01400 {
+			compatible = "allwinner,sun8i-a23-prcm";
+			reg = <0x01f01400 0x200>;
+
+			ar100: ar100-clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&osc24M>;
+				clock-output-names = "ar100";
+			};
+
+			ahb0: ahb0-clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&ar100>;
+				clock-output-names = "ahb0";
+			};
+
+			apb0: apb0-clk {
+				compatible = "allwinner,sun8i-a23-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahb0>;
+				clock-output-names = "apb0";
+			};
+
+			apb0_gates: apb0-gates-clk {
+				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apb0>;
+				clock-output-names = "apb0_pio", "apb0_timer",
+						"apb0_rsb", "apb0_uart",
+						"apb0_i2c";
+			};
+
+			apb0_rst: apb0-rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+
+			codec_analog: codec-analog {
+				compatible = "allwinner,sun8i-a23-codec-analog";
+			};
+		};
+
+		cpucfg@1f01c00 {
+			compatible = "allwinner,sun8i-a23-cpuconfig";
+			reg = <0x01f01c00 0x300>;
+		};
+
+		r_uart: serial@1f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb0_gates 4>;
+			resets = <&apb0_rst 4>;
+			status = "disabled";
+		};
+
+		r_i2c: i2c@1f02400 {
+			compatible = "allwinner,sun8i-a23-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01f02400 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			clocks = <&apb0_gates 6>;
+			resets = <&apb0_rst 6>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun8i-a23-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+				bias-pull-up;
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+				drive-strength = <20>;
+				bias-pull-up;
+			};
+
+			r_uart_pins_a: r-uart-pins {
+				pins = "PL2", "PL3";
+				function = "s_uart";
+			};
+		};
+
+		r_rsb: rsb@1f03400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apb0_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-evb.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-evb.dts
new file mode 100644
index 000000000000..53fb1be0401a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-evb.dts
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Allwinner A23 Evaluation Board";
+	compatible = "allwinner,sun8i-a23-evb", "allwinner,sun8i-a23";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &r_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button-390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button-600 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+/*
+ * The RX line has a non-populated resistance. In order to use it, you
+ * need to solder R207 on the back of the board in order to close the
+ * line and get a working UART.
+ */
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-gt90h-v4.dts
new file mode 100644
index 000000000000..bcbc9b0758f9
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-gt90h-v4.dts
@@ -0,0 +1,76 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Allwinner GT90H Dual Core Tablet (v4)";
+	compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a23";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3675";
+	firmware-name = "gsl3675-gt90h.fw";
+	touchscreen-size-x = <1792>;
+	touchscreen-size-y = <1024>;
+	status = "okay";
+};
+
+&lradc {
+	button-600 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-inet86dz.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-inet86dz.dts
new file mode 100644
index 000000000000..d4405752a414
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-inet86dz.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "INet-86DZ Rev 01";
+	compatible = "primux,inet86dz", "allwinner,sun8i-a23";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl1680";
+	firmware-name = "gsl1680-inet86dz.fw";
+	touchscreen-size-x = <960>;
+	touchscreen-size-y = <640>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v1.2.dts
new file mode 120000
index 000000000000..c2f22fc33811
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v1.2.dts
@@ -0,0 +1 @@
+sun8i-a23-q8-tablet.dts
+\ No newline at end of file
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v5.dts
new file mode 120000
index 000000000000..c2f22fc33811
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v5.dts
@@ -0,0 +1 @@
+sun8i-a23-q8-tablet.dts
+\ No newline at end of file
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
new file mode 100644
index 000000000000..0c585a6d990d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Polaroid MID2407PXE03 tablet";
+	compatible = "polaroid,mid2407pxe03", "allwinner,sun8i-a23";
+
+	aliases {
+		ethernet0 = &esp8089;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&i2c1 {
+	mma7660: accelerometer@4c {
+		reg = <0x4c>;
+		compatible = "fsl,mma7660";
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	esp8089: wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+		esp,crystal-26M-en = <2>;
+	};
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl1680";
+	firmware-name = "gsl1680-polaroid-mid2407pxe03.fw";
+	touchscreen-size-x = <960>;
+	touchscreen-size-y = <640>;
+	touchscreen-inverted-x;
+	touchscreen-inverted-y;
+	vddio-supply = <&reg_ldo_io1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
new file mode 100644
index 000000000000..63cb4e194a03
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Polaroid MID2809PXE04 tablet";
+	compatible = "polaroid,mid2809pxe04", "allwinner,sun8i-a23";
+
+	aliases {
+		ethernet0 = &esp8089;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	esp8089: wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+		esp,crystal-26M-en = <2>;
+	};
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3670";
+	firmware-name = "gsl3670-polaroid-mid2809pxe04.fw";
+	touchscreen-size-x = <1660>;
+	touchscreen-size-y = <890>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-q8-tablet.dts
new file mode 100644
index 000000000000..51097c77a152
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-q8-tablet.dts
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-q8-common.dtsi"
+
+/ {
+	model = "Q8 A23 Tablet";
+	compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"Speaker", "HP",
+		"MIC1", "Mic",
+		"MIC2", "Headset Mic",
+		"Mic",  "MBIAS",
+		"Headset Mic", "HBIAS";
+	status = "okay";
+};
+
+&panel {
+	compatible = "bananapi,s070wv20-ct16";
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint {
+		remote-endpoint = <&panel_input>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a23.dtsi
new file mode 100644
index 000000000000..a5e884a8b2ae
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23.dtsi
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-a23-a33.dtsi"
+
+/ {
+	soc {
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a23-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
+			status = "disabled";
+		};
+	};
+};
+
+&be0 {
+	compatible = "allwinner,sun8i-a23-display-backend";
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-a23-ccu";
+};
+
+&de {
+	compatible = "allwinner,sun8i-a23-display-engine";
+};
+
+&drc0 {
+	compatible = "allwinner,sun8i-a23-drc";
+};
+
+&fe0 {
+	compatible = "allwinner,sun8i-a23-display-frontend";
+};
+
+&pio {
+	compatible = "allwinner,sun8i-a23-pinctrl";
+	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&tcon0 {
+	compatible = "allwinner,sun8i-a23-tcon";
+};
+
+&usb_otg {
+	compatible = "allwinner,sun6i-a31-musb";
+};
+
+&usbphy {
+	compatible = "allwinner,sun8i-a23-usb-phy";
+	reg = <0x01c19400 0x10>, <0x01c1a800 0x4>;
+	reg-names = "phy_ctrl", "pmu1";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-et-q8-v1.6.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-et-q8-v1.6.dts
new file mode 120000
index 000000000000..4519fd791a8f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-et-q8-v1.6.dts
@@ -0,0 +1 @@
+sun8i-a33-q8-tablet.dts
+\ No newline at end of file
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts
new file mode 100644
index 000000000000..f00ce03ffc84
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Allwinner GA10H Quad Core Tablet (v1.1)";
+	compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33";
+
+	aliases {
+		/* Make u-boot set mac-address for rtl8703as (no eeprom) */
+		ethernet0 = &rtl8703as;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3675";
+	firmware-name = "gsl3675-ga10h.fw";
+	touchscreen-size-x = <1630>;
+	touchscreen-size-y = <990>;
+	touchscreen-inverted-y;
+	status = "okay";
+};
+
+&lradc {
+	button-600 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8703as: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts
new file mode 100644
index 000000000000..162ba93f7484
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "INet-D978 Rev 02";
+	compatible = "primux,inet-d978-rev2", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		/* Delete debug UART as serial0 is the UART for bluetooth */
+		/delete-property/stdout-path;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_d978>;
+
+		led {
+			label = "d978:blue:home";
+			gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		};
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&r_pio {
+	led_pin_d978: led-pin {
+		pins = "PL5";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&r_uart {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>,
+		    <&uart1_cts_rts_pg_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-ippo-q8h-v1.2.dts
new file mode 120000
index 000000000000..4519fd791a8f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-ippo-q8h-v1.2.dts
@@ -0,0 +1 @@
+sun8i-a33-q8-tablet.dts
+\ No newline at end of file
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-olinuxino.dts
new file mode 100644
index 000000000000..6fee8f133508
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-olinuxino.dts
@@ -0,0 +1,226 @@
+/*
+ * Copyright 2016 - Stefan Mavrodiev <stefan.mavrodiev@gmail.com>
+ *                  Olimex LTD. <support@olimex.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Olimex A33-OLinuXino";
+	compatible = "olimex,a33-olinuxino","allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "a33-olinuxino:green:usr";
+			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&sound {
+	/* Board level jack widgets */
+	simple-audio-card,widgets = "Microphone", "Microphone Jack",
+				    "Headphone", "Headphone Jack";
+	/* Board level routing. First 2 routes copied from SoC level */
+	simple-audio-card,routing =
+		"Left DAC", "DACL",
+		"Right DAC", "DACR",
+		"HP", "HPCOM",
+		"Headphone Jack", "HP",
+		"MIC1", "Microphone Jack",
+		"Microphone Jack", "MBIAS";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-q8-tablet.dts
new file mode 100644
index 000000000000..9c5750c25613
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-q8-tablet.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-q8-common.dtsi"
+
+/ {
+	model = "Q8 A33 Tablet";
+	compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-sinlinx-sina33.dts
new file mode 100644
index 000000000000..0c82ff3c7cb4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-sinlinx-sina33.dts
@@ -0,0 +1,275 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Sinlinx SinA33";
+	compatible = "sinlinx,sina33", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	panel {
+		compatible = "netron-dy,e231732";
+		power-supply = <&reg_vcc3v3>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_panel>;
+			};
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&cpu0_opp_table {
+	opp-1104000000 {
+		opp-hz = /bits/ 64 <1104000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+
+	opp-1200000000 {
+		opp-hz = /bits/ 64 <1200000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_dcdc1>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191011>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <391304>;
+	};
+
+	button-600 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+	};
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi
new file mode 100644
index 000000000000..ba794b842ec4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+#include "sun8i-a33.dtsi"
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts
new file mode 100644
index 000000000000..9f5c29b3df46
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "sun8i-a33-vstar-core1.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Rervision A33-Vstar";
+	compatible = "rervision,a33-vstar",
+		     "rervision,a33-core1",
+		     "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &r8152;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub@1 {
+		/* Onboard GL850G hub which needs no extra power sequence */
+		compatible = "usb5e3,608";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		r8152: ethernet@4 {
+			/*
+			 * Onboard Realtek RTL8152 USB Ethernet,
+			 * with no MAC address programmed
+			 */
+			compatible = "usbbda,8152";
+			reg = <4>;
+		};
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-191 {
+		label = "V+";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191011>;
+	};
+
+	button-391 {
+		label = "V-";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <391304>;
+	};
+
+	button-600 {
+		label = "BACK";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+/*
+ * Our WiFi chip needs both DLDO1 and DLDO2 to be powered at the same
+ * time, with the two being in sync. Since this is not really
+ * supported right now, just use the two as always on, and we will fix
+ * it later.
+ */
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&sound {
+	/* TODO: on-board microphone */
+
+	simple-audio-card,widgets = "Headphone", "Headphone Jack";
+	simple-audio-card,routing =
+		"Left DAC", "DACL",
+		"Right DAC", "DACR",
+		"Headphone Jack", "HP";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+		host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi
new file mode 100644
index 000000000000..36b2d78cdab9
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi
@@ -0,0 +1,432 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-a23-a33.dtsi"
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&ths>;
+	};
+
+	mali_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-144000000 {
+			opp-hz = /bits/ 64 <144000000>;
+		};
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+		};
+
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+		};
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun8i-a33-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&link_codec>;
+		simple-audio-card,bitclock-master = <&link_codec>;
+		simple-audio-card,mclk-fs = <128>;
+		simple-audio-card,aux-devs = <&codec_analog>;
+		simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&dai>;
+		};
+
+		link_codec: simple-audio-card,codec {
+			sound-dai = <&codec 0>;
+		};
+	};
+
+	soc {
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun8i-a33-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun8i-a33-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SS>;
+			reset-names = "ahb";
+		};
+
+		dai: dai@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-i2s";
+			reg = <0x01c22c00 0x200>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		codec: codec@1c22e00 {
+			#sound-dai-cells = <1>;
+			compatible = "allwinner,sun8i-a33-codec";
+			reg = <0x01c22e00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "bus", "mod";
+			status = "disabled";
+		};
+
+		ths: ths@1c25000 {
+			compatible = "allwinner,sun8i-a33-ths";
+			reg = <0x01c25000 0x100>;
+			#thermal-sensor-cells = <0>;
+			#io-channel-cells = <0>;
+		};
+
+		dsi: dsi@1ca0000 {
+			compatible = "allwinner,sun6i-a31-mipi-dsi";
+			reg = <0x01ca0000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_SCLK>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			phys = <&dphy>;
+			phy-names = "dphy";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port {
+				dsi_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_dsi>;
+				};
+			};
+		};
+
+		dphy: d-phy@1ca1000 {
+			compatible = "allwinner,sun6i-a31-mipi-dphy";
+			reg = <0x01ca1000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map2 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&mali 1 THERMAL_NO_LIMIT>;
+				};
+
+				map3 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&mali 2 THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu-alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert0: gpu-alert0 {
+					/* milliCelsius */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_alert1: cpu-alert1 {
+					/* milliCelsius */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpu_alert1: gpu-alert1 {
+					/* milliCelsius */
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_crit: cpu-crit {
+					/* milliCelsius */
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&be0 {
+	compatible = "allwinner,sun8i-a33-display-backend";
+	/* A33 has an extra "SAT" module packed inside the display backend */
+	reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
+	reg-names = "be", "sat";
+	clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+		 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
+	clock-names = "ahb", "mod",
+		      "ram", "sat";
+	resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
+	reset-names = "be", "sat";
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-a33-ccu";
+};
+
+&de {
+	compatible = "allwinner,sun8i-a33-display-engine";
+};
+
+&drc0 {
+	compatible = "allwinner,sun8i-a33-drc";
+};
+
+&fe0 {
+	compatible = "allwinner,sun8i-a33-display-frontend";
+};
+
+&mali {
+	operating-points-v2 = <&mali_opp_table>;
+};
+
+&pio {
+	compatible = "allwinner,sun8i-a33-pinctrl";
+	interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+
+	uart0_pb_pins: uart0-pb-pins {
+		pins = "PB0", "PB1";
+		function = "uart0";
+	};
+
+};
+
+&tcon0 {
+	compatible = "allwinner,sun8i-a33-tcon";
+};
+
+&tcon0_out {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	tcon0_out_dsi: endpoint@1 {
+		reg = <1>;
+		remote-endpoint = <&dsi_in_tcon0>;
+	};
+};
+
+&usb_otg {
+	compatible = "allwinner,sun8i-a33-musb";
+};
+
+&usbphy {
+	compatible = "allwinner,sun8i-a33-usb-phy";
+	reg = <0x01c19400 0x14>, <0x01c1a800 0x4>;
+	reg-names = "phy_ctrl", "pmu1";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-allwinner-h8homlet-v2.dts
new file mode 100644
index 000000000000..c31c97d16024
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -0,0 +1,281 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
+	compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_usb0_vbus: reg-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+	};
+
+	reg_usb1_vbus: reg-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp818", "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		swin-supply = <&reg_dcdc1>;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp81x.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo4 {
+	/*
+	 * The PHY requires 20ms after all voltages are applied until core
+	 * logic is ready and 30ms after the reset pin is de-asserted.
+	 * Set a 100ms delay to account for PMIC ramp time and board traces.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ephy";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+	/*
+	 * Despite the embedded CPUs core not being used in any way,
+	 * this must remain on or the system will hang.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&reg_sw {
+	regulator-name = "vcc-wifi";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts
new file mode 100644
index 000000000000..32e811fa23e2
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts
@@ -0,0 +1,422 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Banana Pi BPI-M3";
+	compatible = "sinovoip,bpi-m3", "allwinner,sun8i-a83t";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bananapi-m3:blue:usr";
+			gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "bananapi-m3:green:usr";
+			gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb1_vbus: reg-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* The WiFi low power clock must be 32768 Hz */
+		assigned-clocks = <&ac100_rtc 1>;
+		assigned-clock-rates = <32768>;
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+
+	/*
+	 * Power supply for the SATA disk, behind a USB-SATA bridge.
+	 * Since it is a USB device, there is no consumer in the DT, so we
+	 * have to keep this always on.
+	 */
+	regulator-sata-disk-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "sata-disk-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	/* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
+	status = "okay";
+
+	/* TODO GL830 USB-to-SATA bridge downstream w/ GPIO power controls */
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_sw>;
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	allwinner,rx-delay-ps = <700>;
+	allwinner,tx-delay-ps = <700>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&r_cir {
+	clock-frequency = <3000000>;
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		fldoin-supply = <&reg_dcdc5>;
+		swin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp81x.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	/* schematics says 3.1V but FEX file says 3.3V */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	/*
+	 * This powers both the WiFi/BT module's main power, I/O supply,
+	 * and external pull-ups on all the data lines. It should be set
+	 * to the same voltage as the I/O supply (DCDC1 in this case) to
+	 * avoid any leakage or mismatch.
+	 */
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pd";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+	/*
+	 * Despite the embedded CPUs core not being used in any way,
+	 * this must remain on or the system will hang.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&reg_sw {
+	/*
+	 * The PHY requires 20ms after all voltages
+	 * are applied until core logic is ready and
+	 * 30ms after the reset pin is de-asserted.
+	 * Set a 100ms delay to account for PMIC
+	 * ramp time and board traces.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-name = "vcc-ephy";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+		host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts
new file mode 100644
index 000000000000..d5e6ddaffbce
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts
@@ -0,0 +1,464 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cubietech Cubietruck Plus";
+	compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "cubietruck-plus:blue:usr";
+			gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
+		};
+
+		led-1 {
+			label = "cubietruck-plus:orange:usr";
+			gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */
+		};
+
+		led-2 {
+			label = "cubietruck-plus:white:usr";
+			gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */
+		};
+
+		led-3 {
+			label = "cubietruck-plus:green:usr";
+			gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
+		};
+	};
+
+	usb-hub {
+		/* I2C is not connected */
+		compatible = "smsc,usb3503";
+		initial-mode = <1>; /* initialize in HUB mode */
+		disabled-ports = <1>;
+		intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+		reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
+		connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+		refclk-frequency = <19200000>;
+	};
+
+	reg_usb1_vbus: reg-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */
+	};
+
+	reg_usb2_vbus: reg-usb2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* The WiFi low power clock must be 32768 Hz */
+		assigned-clocks = <&ac100_rtc 1>;
+		assigned-clock-rates = <32768>;
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	/* GL830 USB-to-SATA bridge here */
+	status = "okay";
+};
+
+&ehci1 {
+	/* USB3503 HSIC USB 2.0 hub here */
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_dldo4>;
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_sw>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp818", "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		swin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp81x.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	/*
+	 * The schematics say this should be 3.3V, but the FEX file says
+	 * it should be 3V. The latter makes sense, as the WiFi module's
+	 * I/O is indirectly powered from DCDC1, through SW. It is rated
+	 * at 2.98V maximum.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "dp-pwr";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "ephy-io";
+};
+
+&reg_dldo4 {
+	/*
+	 * The PHY requires 20ms after all voltages are applied until core
+	 * logic is ready and 30ms after the reset pin is de-asserted.
+	 * Set a 100ms delay to account for PMIC ramp time and board traces.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "ephy";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "dp-bridge-1";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "dp-bridge-2";
+};
+
+&reg_fldo1 {
+	/* TODO should be handled by USB PHY */
+	regulator-always-on;
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+	/*
+	 * Despite the embedded CPUs core not being used in any way,
+	 * this must remain on or the system will hang.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&reg_sw {
+	regulator-name = "vcc-wifi-io";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dcdc1>;
+		vddio-supply = <&reg_sw>;
+		device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+		host-wakeup-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
new file mode 100644
index 000000000000..43982b106a4d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
@@ -0,0 +1,506 @@
+/*
+ * Copyright (C) 2017 Touchless Biometric Systems AG
+ * Tomas Novotny <tomas@novotny.cz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TBS A711 Tablet";
+	compatible = "tbs-biometrics,a711", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_sw>;
+		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
+		default-brightness-level = <9>;
+	};
+
+	panel {
+		compatible = "tbs,a711-panel", "panel-lvds";
+		backlight = <&backlight>;
+		power-supply = <&reg_sw>;
+
+		width-mm = <153>;
+		height-mm = <90>;
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			/* 1024x600 @60Hz */
+			clock-frequency = <52000000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hsync-len = <20>;
+			hfront-porch = <180>;
+			hback-porch = <160>;
+			vfront-porch = <12>;
+			vback-porch = <23>;
+			vsync-len = <5>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+
+	reg_gps: reg-gps {
+		compatible = "regulator-fixed";
+		regulator-name = "gps";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	reg_vbat: reg-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	reg_vmain: reg-vmain {
+		compatible = "regulator-fixed";
+		regulator-name = "vmain";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vbat>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+
+		/*
+		 * This is actually Bluetooth's clock, but we have to
+		 * hook it up somewheere
+		 */
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+/*
+ * An USB-2 hub is connected here, which also means we don't need to
+ * enable the OHCI controller.
+ */
+&ehci0 {
+	status = "okay";
+};
+
+/*
+ * There's a modem connected here that needs to be initialised before
+ * being able to be enumerated.
+ */
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5206";
+		reg = <0x38>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */
+		reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>; /* PD5 */
+		vcc-supply = <&reg_ldo_io0>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	accelerometer@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 WL_WAKE_UP */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pin>;
+	status = "okay";
+};
+
+&r_lradc {
+	vref-supply = <&reg_aldo2>;
+	status = "okay";
+
+	button-210 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <210000>;
+	};
+
+	button-410 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <410000>;
+	};
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		swin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 12 IRQ_TYPE_LEVEL_LOW>; /* PL12 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+
+};
+
+#include "axp81x.dtsi"
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1.8";
+};
+
+&reg_aldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+	regulator-name = "vdd-drampll";
+};
+
+&reg_aldo3 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-always-on;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-always-on;
+	regulator-name = "vcc-io";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-always-on;
+	regulator-name = "vdd-cpu-A";
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-always-on;
+	regulator-name = "vdd-cpu-B";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-always-on;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-always-on;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <4200000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi-r";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dsi";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi-f";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-hsic";
+};
+
+&reg_fldo2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-always-on;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-ctp";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-vb";
+	status = "okay";
+};
+
+&reg_sw {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-lcd";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_lvds_pins>;
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint {
+		remote-endpoint = <&panel_input>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* There's the BT part of the AP6210 connected to that UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm20702a1";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vbat>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+		host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		max-speed = <1500000>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pb_pins>;
+	status = "okay";
+
+	gnss {
+		compatible = "u-blox,neo-6m";
+
+		v-bckp-supply = <&reg_rtc_ldo>;
+		vcc-supply = <&reg_gps>;
+		current-speed = <9600>;
+	};
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_vmain>;
+	usb2_vbus-supply = <&reg_vmain>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
new file mode 100644
index 000000000000..6f88d8764e6a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
@@ -0,0 +1,1274 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ *
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/clock/sun8i-a83t-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/reset/sun8i-a83t-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C0CPUX>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C0CPUX>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C0CPUX>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C0CPUX>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <3>;
+			#cooling-cells = <2>;
+		};
+
+		cpu100: cpu@100 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C1CPUX>;
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x100>;
+			#cooling-cells = <2>;
+		};
+
+		cpu101: cpu@101 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C1CPUX>;
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x101>;
+			#cooling-cells = <2>;
+		};
+
+		cpu102: cpu@102 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C1CPUX>;
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x102>;
+			#cooling-cells = <2>;
+		};
+
+		cpu103: cpu@103 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C1CPUX>;
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x103>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* TODO: PRCM block has a mux for this. */
+		osc24M: osc24M-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		/*
+		 * This is called "internal OSC" in some places.
+		 * It is an internal RC-based oscillator.
+		 * TODO: Its controls are in the PRCM block.
+		 */
+		osc16M: osc16M-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <16000000>;
+			clock-output-names = "osc16M";
+		};
+
+		osc16Md512: osc16Md512-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <512>;
+			clock-mult = <1>;
+			clocks = <&osc16M>;
+			clock-output-names = "osc16M-d512";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-a83t-display-engine";
+		allwinner,pipelines = <&mixer0>, <&mixer1>;
+		status = "disabled";
+	};
+
+	cpu0_opp_table: opp-table-cluster0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-864000000 {
+			opp-hz = /bits/ 64 <864000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1128000000 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	cpu1_opp_table: opp-table-cluster1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-864000000 {
+			opp-hz = /bits/ 64 <864000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1128000000 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-a83t-de2-clk";
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_PLL_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rotate: rotate@1020000 {
+			compatible = "allwinner,sun8i-a83t-de2-rotate";
+			reg = <0x1020000 0x10000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&display_clocks CLK_BUS_ROT>,
+				 <&display_clocks CLK_ROT>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_ROT>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-a83t-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+
+					mixer0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		mixer1: mixer@1200000 {
+			compatible = "allwinner,sun8i-a83t-de2-mixer-1";
+			reg = <0x01200000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER1>,
+				 <&display_clocks CLK_MIXER1>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_WB>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					mixer1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_mixer1>;
+					};
+
+					mixer1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_mixer1>;
+					};
+				};
+			};
+		};
+
+		cpucfg@1700000 {
+			compatible = "allwinner,sun8i-a83t-cpucfg";
+			reg = <0x01700000 0x400>;
+		};
+
+		cci@1790000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01790000 0x10000>;
+			ranges = <0x0 0x01790000 0x10000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1";
+				reg = <0x9000 0x5000>;
+				interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		syscon: syscon@1c00000 {
+			compatible = "allwinner,sun8i-a83t-system-controller",
+				"syscon";
+			reg = <0x01c00000 0x1000>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-a83t-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-a83t-tcon-lcd";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+			clock-names = "ahb", "tcon-ch0";
+			clock-output-names = "tcon-data-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd", "lvds";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+
+					tcon0_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun8i-a83t-tcon-tv";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON1>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon1>;
+					};
+
+					tcon1_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun8i-a83t-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun8i-a83t-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun8i-a83t-emmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		sid: eeprom@1c14000 {
+			compatible = "allwinner,sun8i-a83t-sid";
+			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 8>;
+			};
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun8i-a83t-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_SS>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+			clock-names = "bus", "mod";
+		};
+
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun8i-a83t-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-a83t-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun8i-a83t-usb-phy";
+			reg = <0x01c19400 0x10>,
+			      <0x01c1a800 0x14>,
+			      <0x01c1b800 0x14>;
+			reg-names = "phy_ctrl",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_HSIC>,
+				 <&ccu CLK_USB_HSIC_12M>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb2_hsic_12M";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_HSIC>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun8i-a83t-ehci",
+				     "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun8i-a83t-ohci",
+				     "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1b000 {
+			compatible = "allwinner,sun8i-a83t-ehci",
+				     "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-a83t-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc16Md512>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-a83t-pinctrl";
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c20800 0x400>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			/omit-if-no-ref/
+			csi_8bit_parallel_pins: csi-8bit-parallel-pins {
+				pins = "PE0", "PE2", "PE3", "PE6", "PE7",
+				       "PE8", "PE9", "PE10", "PE11",
+				       "PE12", "PE13";
+				function = "csi";
+			};
+
+			/omit-if-no-ref/
+			csi_mclk_pin: csi-mclk-pin {
+				pins = "PE1";
+				function = "csi";
+			};
+
+			emac_rgmii_pins: emac-rgmii-pins {
+				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				       "PD11", "PD12", "PD13", "PD14", "PD18",
+				       "PD19", "PD21", "PD22", "PD23";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			hdmi_pins: hdmi-pins {
+				pins = "PH6", "PH7", "PH8";
+				function = "hdmi";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PH0", "PH1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH2", "PH3";
+				function = "i2c1";
+			};
+
+			/omit-if-no-ref/
+			i2c2_pe_pins: i2c2-pe-pins {
+				pins = "PE14", "PE15";
+				function = "i2c2";
+			};
+
+			i2c2_ph_pins: i2c2-ph-pins {
+				pins = "PH4", "PH5";
+				function = "i2c2";
+			};
+
+			i2s1_pins: i2s1-pins {
+				/* I2S1 does not have external MCLK pin */
+				pins = "PG10", "PG11", "PG12", "PG13";
+				function = "i2s1";
+			};
+
+			lcd_lvds_pins: lcd-lvds-pins {
+				pins = "PD18", "PD19", "PD20", "PD21", "PD22",
+				       "PD23", "PD24", "PD25", "PD26", "PD27";
+				function = "lvds0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2",
+				       "PG3", "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins {
+				pins = "PC5", "PC6", "PC8", "PC9",
+				       "PC10", "PC11", "PC12", "PC13",
+				       "PC14", "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			pwm_pin: pwm-pin {
+				pins = "PD28";
+				function = "pwm";
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PE18";
+				function = "spdif";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB9", "PB10";
+				function = "uart0";
+			};
+
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart2_pb_pins: uart2-pb-pins {
+				pins = "PB0", "PB1";
+				function = "uart2";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-a23-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-spdif",
+				     "allwinner,sun8i-h3-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_BUS_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			resets = <&ccu RST_BUS_I2S0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_pins>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 27>;
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun8i-a83t-pwm",
+				     "allwinner,sun8i-h3-pwm";
+			reg = <0x01c21400 0x400>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun8i-a83t-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun8i-a83t-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun8i-a83t-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-a83t-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x104>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		csi: camera@1cb0000 {
+			compatible = "allwinner,sun8i-a83t-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			status = "disabled";
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_HDMI>;
+			clock-names = "iahb", "isfr", "tmds";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pins>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon1: endpoint {
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-a83t-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun8i-a83t-r-intc",
+				     "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ccu: clock@1f01400 {
+			compatible = "allwinner,sun8i-a83t-r-ccu";
+			reg = <0x01f01400 0x400>;
+			clocks = <&osc24M>, <&osc16Md512>, <&osc16M>,
+				 <&ccu CLK_PLL_PERIPH>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		cpucfg@1f01c00 {
+			compatible = "allwinner,sun8i-a83t-r-cpucfg";
+			reg = <0x1f01c00 0x400>;
+		};
+
+		r_cir: ir@1f02000 {
+			compatible = "allwinner,sun8i-a83t-ir",
+				"allwinner,sun6i-a31-ir";
+			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_APB0_IR>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x400>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_cir_pin>;
+			status = "disabled";
+		};
+
+		r_lradc: lradc@1f03c00 {
+			compatible = "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01f03c00 0x100>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun8i-a83t-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
+				 <&osc16Md512>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_cir_pin: r-cir-pin {
+				pins = "PL12";
+				function = "s_cir_rx";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+				drive-strength = <20>;
+				bias-pull-up;
+			};
+		};
+
+		r_rsb: rsb@1f03400 {
+			compatible = "allwinner,sun8i-a83t-rsb",
+				     "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_RSB>;
+			clock-frequency = <3000000>;
+			resets = <&r_ccu RST_APB0_RSB>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ths: thermal-sensor@1f04000 {
+			compatible = "allwinner,sun8i-a83t-ths";
+			reg = <0x01f04000 0x100>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu0_hot: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_very_hot: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1_thermal: cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+
+			trips {
+				cpu1_hot: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_very_hot: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_hot>;
+					cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
new file mode 100644
index 000000000000..d3a7c9fa23e4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * Based on sun8i-h3-bananapi-m2-plus.dts, which is:
+ *   Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Banana Pi BPI-M2-Zero";
+	compatible = "sinovoip,bpi-m2-zero", "allwinner,sun8i-h2-plus";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "bananapi-m2-zero:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		switch-4 {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+		enable-active-high;
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	reg_vcc1v2: vcc1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	poweroff {
+		compatible = "regulator-poweroff";
+		cpu-supply = <&reg_vcc1v2>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	/*
+	 * On the production batch of this board the card detect GPIO is
+	 * high active (card inserted), although on the early samples it's
+	 * low active.
+	 */
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <1500000>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+		host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	};
+
+};
+
+&pio {
+	gpio-line-names =
+		/* PA */
+		"CON2-P13", "CON2-P11", "CON2-P22", "CON2-P15",
+			"CON3-P03", "CON3-P02", "CON2-P07", "CON2-P29",
+		"CON2-P31", "CON2-P33", "CON2-P35", "CON2-P05",
+			"CON2-P03", "CON2-P08", "CON2-P10", "CON2-P16",
+		"CON2-P12", "CON2-P37", "CON2-P28", "CON2-P27",
+			"CON2-P40", "CON2-P38", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PB */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PC */
+		"CON2-P19", "CON2-P21", "CON2-P23", "CON2-P24",
+			"CON2-P18", "", "", "CON2-P26",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PD */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "CSI-PWR-EN", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PE */
+		"CN3-P17", "CN3-P13", "CN3-P09", "CN3-P07",
+			"CN3-P19", "CN3-P21", "CN3-P22", "CN3-P20",
+		"CN3-P18", "CN3-P16", "CN3-P14", "CN3-P12",
+			"CN3-P05", "CN3-P03", "CN3-P06", "CN3-P08",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PF */
+		"SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
+			"SDC0-D2", "SDC0-DET", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PG */
+		"WL-SDIO-CLK", "WL-SDIO-CMD", "WL-SDIO-D0", "WL-SDIO-D1",
+			"WL-SDIO-D2", "WL-SDIO-D3", "BT-UART-TX", "BT-UART-RX",
+		"BT-UART-RTS", "BT-UART-CTS", "WL-WAKE-AP", "BT-WAKE-AP",
+			"BT-RST-N", "AP-WAKE-BT", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&r_pio {
+	gpio-line-names =
+		/* PL */
+		"", "CPUX-SET", "CON2-P32", "POWER-KEY", "CON2-P36",
+			"VCC-IO-EN", "USB0-ID", "WL-PWR-EN",
+		"PWR-STB", "PWR-DRAM", "PWR-LED", "IR-RX", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	/*
+	 * There're two micro-USB connectors, one is power-only and another is
+	 * OTG. The Vbus of these two connectors are connected together, so
+	 * the external USB device will be powered just by the power input
+	 * from the power-only USB port.
+	 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-libretech-all-h3-cc.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-libretech-all-h3-cc.dts
new file mode 100644
index 000000000000..4db0d4bb65eb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-libretech-all-h3-cc.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-libretech-all-h3-cc.dtsi"
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H2+";
+	compatible = "libretech,all-h3-cc-h2-plus", "allwinner,sun8i-h2-plus";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts
new file mode 100644
index 000000000000..79b03b31c5eb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* Orange Pi R1 is based on Orange Pi Zero design */
+#include "sun8i-h2-plus-orangepi-zero.dts"
+
+/delete-node/ &reg_vcc_wifi;
+
+/ {
+	model = "Xunlong Orange Pi R1";
+	compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
+
+
+	/*
+	 * Ths pin of this regulator is the same with the Wi-Fi extra
+	 * regulator on the original Zero. However it's used for USB
+	 * Ethernet rather than the Wi-Fi now.
+	 */
+	reg_vcc_usb_eth: reg-vcc-usb-ethernet {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc-usb-ethernet";
+		enable-active-high;
+		gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+	};
+
+	aliases {
+		ethernet1 = &rtl8189etv;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
+	};
+};
+
+&ohci1 {
+	/*
+	 * RTL8152B USB-Ethernet adapter is connected to USB1,
+	 * and it's a USB 2.0 device. So the OHCI1 controller
+	 * can be left disabled.
+	 */
+	status = "disabled";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+
+	rtl8189etv: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc_usb_eth>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
new file mode 100644
index 000000000000..b23cec5b89eb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
@@ -0,0 +1,223 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun8i-h3-orangepi-one.dts, which is:
+ *   Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi Zero";
+	compatible = "xunlong,orangepi-zero", "allwinner,sun8i-h2-plus";
+
+	aliases {
+		serial0 = &uart0;
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet0 = &emac;
+		ethernet1 = &xr819;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc_wifi: reg-vcc-wifi {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc-wifi";
+		enable-active-high;
+		gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		enable-active-high;
+		gpios-states = <1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+/*
+ * Audio input/output is exposed on the 13-pin header and can't be used for
+ * anything else. However, adapter boards may use different audio routing.
+ * - https://linux-sunxi.org/Xunlong_Orange_Pi_Zero#Expansion_Port
+ * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics
+ */
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "disabled";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	xr819: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&spi0 {
+	/* Disable SPI NOR by default: it optional on Orange Pi Zero boards */
+	status = "disabled";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	/*
+	 * USB Type-A port VBUS is always on. However, MicroUSB VBUS can only
+	 * power up the board; when it's used as OTG port, this VBUS is
+	 * always off even if the board is powered via GPIO pins.
+	 */
+	status = "okay";
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus-v1.2.dts
new file mode 100644
index 000000000000..fc4a8c3d084d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus-v1.2.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-bananapi-m2-plus-v1.2.dtsi"
+
+/ {
+	model = "Banana Pi BPI-M2-Plus v1.2 H3";
+	compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun8i-h3";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus.dts
new file mode 100644
index 000000000000..195a75da13f1
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-bananapi-m2-plus.dtsi"
+
+/ {
+	model = "Banana Pi BPI-M2-Plus H3";
+	compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts
new file mode 100644
index 000000000000..5b77300307de
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts
@@ -0,0 +1,238 @@
+/*
+ * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Beelink X2";
+	compatible = "roofull,beelink-x2", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &emac;
+		ethernet1 = &sdiowifi;
+	};
+
+	cec {
+		compatible = "cec-gpio";
+		cec-gpios = <&pio 0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PA14 */
+		hdmi-phandle = <&hdmi>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "beelink-x2:blue:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "beelink-x2:red:standby";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	sound_spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-tanix-tx3mini";
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	sdiowifi: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on except for the OTG port */
+	status = "okay";
+	usb0_id_det-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA07 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3-devboard.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3-devboard.dts
new file mode 100644
index 000000000000..02fbe00cde97
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3-devboard.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTS for Emlid Neutis N5 Dev board.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgiii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3-emlid-neutis-n5h3.dtsi"
+
+/ {
+	model = "Emlid Neutis N5H3 Developer board";
+	compatible = "emlid,neutis-n5h3-devboard",
+		     "emlid,neutis-n5h3",
+		     "allwinner,sun8i-h3";
+
+	vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0x0>, <1300000 0x1>;
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&codec {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3.dtsi
new file mode 100644
index 000000000000..35e71f46c197
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis N5 SoM.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+#include "sunxi-h3-h5-emlid-neutis.dtsi"
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-libretech-all-h3-cc.dts
new file mode 100644
index 000000000000..a8b2f0f1c11d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-libretech-all-h3-cc.dts
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-libretech-all-h3-cc.dtsi"
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H3";
+	compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-mapleboard-mp130.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-mapleboard-mp130.dts
new file mode 100644
index 000000000000..f5c8ccc5b872
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-mapleboard-mp130.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Centrum Embedded Systems, Jia-Bin Huang <jb@ces.com.tw>
+ * Copyright (C) 2018 Jonathan McDowell <noodles@earth.li>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "MapleBoard MP130";
+	compatible = "mapleboard,mp130", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "mp130:orange:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "mp130:orange:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
+		};
+
+		key-user {
+			label = "user";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"LINEIN", "Line In";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
new file mode 100644
index 000000000000..2b0566d4b386
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Karl Palsson <karlp@tweak.net.au>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "FriendlyARM NanoPi Duo2";
+	compatible = "friendlyarm,nanopi-duo2", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "nanopi:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "nanopi:green:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "k1";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
+		};
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		enable-active-high;
+		enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		vin-supply = <&reg_vcc5v0>;
+        };
+
+	reg_vdd_sys: vdd-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-sys";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		vin-supply = <&reg_vcc5v0>;
+        };
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts
new file mode 100644
index 000000000000..59bd0746acf8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyArm NanoPi M1 Plus";
+	compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		serial1 = &uart3;
+		ethernet0 = &emac;
+		ethernet1 = &sdio_wifi;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1.dts
new file mode 100644
index 000000000000..69243dcb30a6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1.dts
@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyArm NanoPi M1";
+	compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
new file mode 100644
index 000000000000..9a2742363cd0
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2017 Jelle van der Waa <jelle@vdwaa.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "FriendlyARM NanoPi NEO Air";
+	compatible = "friendlyarm,nanopi-neo-air", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+		};
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts
new file mode 100644
index 000000000000..df71fab3cf4e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyARM NanoPi NEO";
+	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts
new file mode 100644
index 000000000000..870649760f70
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
+ * Copyright (C) 2020 Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
+ * Copyright (C) 2020 Yu-Tung Chang <mtwget@gmail.com>
+*/
+
+#include "sun8i-h3-nanopi.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "FriendlyARM NanoPi R1";
+	compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
+
+	aliases {
+		serial1 = &uart1;
+		ethernet0 = &emac;
+		ethernet1 = &wifi;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+	};
+
+	reg_vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>;
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0x0>,
+			 <1300000 0x1>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+
+	leds {
+		led-2 {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		};
+
+		led-3 {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; /* PA9 */
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	wifi: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi.dtsi
new file mode 100644
index 000000000000..cf8413fba6c1
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi.dtsi
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "k1";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts
new file mode 100644
index 000000000000..d2ae47b074bf
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi 2";
+	compatible = "xunlong,orangepi-2", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet0 = &emac;
+		ethernet1 = &rtl8189;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		switch-2 {
+			label = "sw2";
+			linux,code = <BTN_1>;
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-4 {
+			label = "sw4";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+	allwinner,audio-routing =
+		"Speaker", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts
new file mode 100644
index 000000000000..6a4316a52469
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi Lite";
+	compatible = "xunlong,orangepi-lite", "allwinner,sun8i-h3";
+
+	aliases {
+		/* The H3 emac is not used so the wifi is ethernet0 */
+		ethernet0 = &rtl8189ftv;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		switch-4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-one.dts
new file mode 100644
index 000000000000..59f6f6d5e7ca
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-one.dts
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi One";
+	compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		switch-4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		enable-active-high;
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A port's VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts
new file mode 100644
index 000000000000..8a49b3376dfc
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The Orange Pi PC Plus is an extended version of the regular PC */
+#include "sun8i-h3-orangepi-pc.dts"
+
+/ {
+	model = "Xunlong Orange Pi PC Plus";
+	compatible = "xunlong,orangepi-pc-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet1 = &rtl8189ftv;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+	/* eMMC is missing pull-ups */
+	bias-pull-up;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc.dts
new file mode 100644
index 000000000000..b96e015f54ee
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc.dts
@@ -0,0 +1,242 @@
+/*
+ * Copyright (C) 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi PC";
+	compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		switch-4 {
+			label = "sw4";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	reg_vdd_cpux: regulator@65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		silergy,fixed-microvolt = <1200000>;
+		/*
+		 * The datasheet uses 1.1V as the minimum value of VDD-CPUX,
+		 * however both the Armbian DVFS table and the official one
+		 * have operating points with voltage under 1.1V, and both
+		 * DVFS table are known to work properly at the lowest
+		 * operating point.
+		 *
+		 * Use 1.0V as the minimum voltage instead.
+		 */
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	/* VBUS on USB host ports are always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus.dts
new file mode 100644
index 000000000000..d05fa679dcd3
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus.dts
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The Orange Pi Plus is an extended version of the Orange Pi 2 */
+#include "sun8i-h3-orangepi-2.dts"
+
+/ {
+	model = "Xunlong Orange Pi Plus / Plus 2";
+	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+	/* eMMC is missing pull-ups */
+	bias-pull-up;
+};
+
+&r_i2c {
+	status = "okay";
+
+	reg_vdd_cpux: regulator@65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		silergy,fixed-microvolt = <1200000>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <200>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&usbphy {
+	usb3_vbus-supply = <&reg_usb3_vbus>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus2e.dts
new file mode 100644
index 000000000000..b6ca45d18e51
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus2e.dts
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The Orange Pi Plus 2E is an extended version of the Orange Pi PC Plus,
+ * with 2G RAM and an external gbit ethernet phy.
+ */
+
+#include "sun8i-h3-orangepi-pc-plus.dts"
+
+/ {
+	model = "Xunlong Orange Pi Plus 2E";
+	compatible = "xunlong,orangepi-plus2e", "allwinner,sun8i-h3";
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+	};
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
new file mode 100644
index 000000000000..97a3565ac7a8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
@@ -0,0 +1,191 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ * Copyright (C) 2018 Diego Rondini <diego.rondini@kynetics.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi Zero Plus2 H3";
+	compatible = "xunlong,orangepi-zero-plus2-h3", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+/*
+ * Audio input/output is exposed on the 13-pin header and can't be used for
+ * anything else. However, adapter boards may use different audio routing.
+ * - http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-Plus-2.html
+ * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics
+ */
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "disabled";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>;	/* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * According to schematics CN1 MicroUSB port can be used to take
+	 * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
+	 * port cannot provide power externally even if the board is powered
+	 * via GPIO pins. It thus makes sense to force peripheral mode.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-rervision-dvk.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-rervision-dvk.dts
new file mode 100644
index 000000000000..4738f3a9efe4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-rervision-dvk.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Bootlin
+ * Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "RerVision H3-DVK";
+	compatible = "rervision,h3-dvk", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-zeropi.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-zeropi.dts
new file mode 100644
index 000000000000..7d3e7323b661
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-zeropi.dts
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2020 Yu-Tung Chang <mtwget@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyARM ZeroPi";
+	compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+	};
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
new file mode 100644
index 000000000000..cfd039840b43
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
@@ -0,0 +1,335 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-h3-h5.dtsi"
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000 1040000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000 1100000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000 1200000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+		};
+
+		opp-432000000 {
+			opp-hz = /bits/ 64 <432000000>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		deinterlace: deinterlace@1400000 {
+			compatible = "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01400000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 <&ccu CLK_DRAM_DEINTERLACE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-h3-system-control";
+			reg = <0x01c00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0x80000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0x80000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-h3-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun8i-h3-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun8i-h3-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-h3-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun8i-h3-ths";
+			reg = <0x01c25000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-h3-ccu";
+};
+
+&display_clocks {
+	compatible = "allwinner,sun8i-h3-de2-clk";
+};
+
+&mbus {
+	compatible = "allwinner,sun8i-h3-mbus";
+};
+
+&mmc0 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC0>,
+		 <&ccu CLK_MMC0>,
+		 <&ccu CLK_MMC0_OUTPUT>,
+		 <&ccu CLK_MMC0_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&mmc1 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC1>,
+		 <&ccu CLK_MMC1>,
+		 <&ccu CLK_MMC1_OUTPUT>,
+		 <&ccu CLK_MMC1_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&mmc2 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC2>,
+		 <&ccu CLK_MMC2>,
+		 <&ccu CLK_MMC2_OUTPUT>,
+		 <&ccu CLK_MMC2_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&pio {
+	compatible = "allwinner,sun8i-h3-pinctrl";
+};
+
+&rtc {
+	compatible = "allwinner,sun8i-h3-rtc";
+};
+
+&sid {
+	compatible = "allwinner,sun8i-h3-sid";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso
new file mode 100644
index 000000000000..e137eefee341
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ *
+ * Devicetree overlay for the Orange Pi Zero Interface board (OP0014).
+ *
+ *   https://orangepi.com/index.php?route=product/product&product_id=871
+ *
+ * This overlay applies to the following base files:
+ *
+ * - arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
+ * - arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
+ */
+
+/dts-v1/;
+/plugin/;
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
new file mode 100644
index 000000000000..a0f787581dd9
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
@@ -0,0 +1,118 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	aliases {
+		serial0 = &r_uart;
+		/* Make u-boot set mac-address for wifi without an eeprom */
+		ethernet0 = &sdio_wifi;
+	};
+
+	panel: panel {
+		/* Tablet dts should provide panel compatible */
+		backlight = <&backlight>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_dc1sw>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		/*
+		 * Q8 boards use various PL# pins as wifi-en. On other boards
+		 * these may be connected to a wifi module output pin. To avoid
+		 * short-circuits we configure these as inputs with pull-ups via
+		 * pinctrl, instead of listing them as active-low reset-gpios.
+		 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pin_q8>;
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&r_pio {
+	wifi_pwrseq_pin_q8: wifi-pwrseq-pins {
+		pins = "PL6", "PL7", "PL11";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts
new file mode 100644
index 000000000000..f4bf46b35bec
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts
@@ -0,0 +1,311 @@
+/*
+ * Copyright (c) 2017 Free Electrons <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "BananaPi M2 Magic";
+	compatible = "sinovoip,bananapi-m2m", "allwinner,sun8i-a33";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bpi-m2m:blue:usr";
+			gpios = <&pio 2 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			label = "bpi-m2m:green:usr";
+			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			label = "bpi-m2m:red:power";
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&cpu0_opp_table {
+	opp-1104000000 {
+		opp-hz = /bits/ 64 <1104000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+
+	opp-1200000000 {
+		opp-hz = /bits/ 64 <1200000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+/*
+ * Our WiFi chip needs both DLDO1 and DLDO2 to be powered at the same
+ * time, with the two being in sync. Since this is not really
+ * supported right now, just use the two as always on, and we will fix
+ * it later.
+ */
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_aldo3>;
+		device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+		host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-nes-classic.dts
new file mode 100644
index 000000000000..246dec5846a4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-nes-classic.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/* Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com> */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Nintendo NES Classic Edition";
+	compatible = "nintendo,nes-classic", "allwinner,sun8i-r16",
+		     "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	/*
+	 * UART0 is available on two ports: PB and PF, both are accessible.
+	 * PF can also be used for the SD card so PB is preferred.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pf_pins>;
+	status = "okay";
+};
+
+&nfc {
+	status = "okay";
+
+	/* 2Gb Macronix MX30LF2G18AC (3V) */
+	nand@0 {
+		reg = <0>;
+		allwinner,rb = <0>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <16>;
+		nand-ecc-step-size = <1024>;
+	};
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbphy {
+	/* VBUS is always on because it is wired to the power supply */
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-super-nes-classic.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-super-nes-classic.dts
new file mode 100644
index 000000000000..80761d7904ec
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-super-nes-classic.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/* Copyright (c) 2018 Miquèl RAYNAL <miquel.raynal@bootlin.com> */
+
+/dts-v1/;
+#include "sun8i-r16-nintendo-nes-classic.dts"
+
+/ {
+	model = "Nintendo SuperNES Classic Edition";
+	compatible = "nintendo,super-nes-classic", "nintendo,nes-classic",
+		     "allwinner,sun8i-r16", "allwinner,sun8i-a33";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts
new file mode 100644
index 000000000000..75067522ff59
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts
@@ -0,0 +1,313 @@
+/*
+ * Copyright 2016 Quentin Schulz
+ *
+ * Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Allwinner R16 EVB (Parrot)";
+	compatible = "allwinner,parrot", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			label = "parrot:led1:usr";
+			gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+		};
+
+		led-2 {
+			label = "parrot:led2:usr";
+			gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+		};
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
+	};
+
+};
+
+&codec {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/*
+	 * FIXME: An as-yet-unknown accelerometer is connected to this
+	 * i2c bus.
+	 */
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-190 {
+		label = "V+";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button-390 {
+		label = "V-";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	drive-strength = <40>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	/*
+	 * TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.
+	 * Remove next line once it is possible to sync two regulators.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+	/*
+	 * TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.
+	 * Remove next line once it is possible to sync two regulators.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0-csi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-dsp";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "eldo3";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */
+	status = "okay";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb0_id_det-gpios = <&pio 3 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD10 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts
new file mode 100644
index 000000000000..cd2351acc32f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts
@@ -0,0 +1,340 @@
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Banana Pi BPI-M2-Ultra";
+	compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40";
+
+	aliases {
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr-led {
+			label = "bananapi:red:pwr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user-led-green {
+			label = "bananapi:green:user";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led-blue {
+			label = "bananapi:blue:user";
+			gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+		enable-active-high;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo3>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&ir0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo2>;
+	vqmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-gmac-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+/*
+ * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same
+ * time, with the two being in sync, to be able to meet maximum power
+ * consumption during transmits. Since this is not really supported
+ * right now, just use the two as always on, and we will fix it later.
+ */
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd1v2-sata";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo2>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		/* TODO host wake line connected to PMIC GPIO pins */
+		shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+		max-speed = <1500000>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-cpu-opp.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40-cpu-opp.dtsi
new file mode 100644
index 000000000000..649928b361af
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-cpu-opp.dtsi
@@ -0,0 +1,52 @@
+/{
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1000000 1000000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1100000 1100000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1160000 1160000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1240000 1240000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1300000 1300000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi
new file mode 100644
index 000000000000..c12361d0317f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// Copyright (C) 2021 Ivan Uvarov <i.uvarov@cognitivepilot.com>
+// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is:
+//  Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+//  Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_aldo2>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_aldo2>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pf-supply = <&reg_dldo4>;
+	vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3-tv-usb";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd1v2-sata";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts b/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts
new file mode 100644
index 000000000000..15b0b4de626a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// Copyright (C) 2021 Ivan Uvarov <i.uvarov@cognitivepilot.com>
+// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is:
+//	Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+//	Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+/dts-v1/;
+#include "sun8i-r40-feta40i.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Forlinx OKA40i-C";
+	compatible = "forlinx,oka40i-c", "forlinx,feta40i-c", "allwinner,sun8i-r40";
+
+	aliases {
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5; /* RS485 */
+		serial7 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5 { /* this is how the leds are labeled on the board */
+			gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led-6 {
+			gpios = <&pio 8 15 GPIO_ACTIVE_LOW>; /* PI15 */
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo2>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 11 GPIO_ACTIVE_LOW>; // PI11
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 10 GPIO_ACTIVE_LOW>; // PI10
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_rts_cts_pi_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pg_pins>;
+	status = "okay";
+};
+
+&uart5 { /* RS485 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
new file mode 100644
index 000000000000..f0ed802a9d08
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
@@ -0,0 +1,1328 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
+#include <dt-bindings/reset/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <20000>;
+			clock-output-names = "ext-osc32k";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-r40-display-engine";
+		allwinner,pipelines = <&mixer0>, <&mixer1>;
+		status = "disabled";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-r40-de2-clk",
+				     "allwinner,sun8i-h3-de2-clk";
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-r40-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+					mixer0_out_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		mixer1: mixer@1200000 {
+			compatible = "allwinner,sun8i-r40-de2-mixer-1";
+			reg = <0x01200000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER1>,
+				 <&display_clocks CLK_MIXER1>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_WB>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer1_out: port@1 {
+					reg = <1>;
+					mixer1_out_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
+					};
+				};
+			};
+		};
+
+		deinterlace: deinterlace@1400000 {
+			compatible = "allwinner,sun8i-r40-deinterlace",
+				     "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01400000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 /*
+				  * NOTE: Contrary to what datasheet claims,
+				  * DRAM deinterlace gate doesn't exist and
+				  * it's shared with CSI1.
+				  */
+				 <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-r40-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-r40-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		nmi_intc: interrupt-controller@1c00030 {
+			compatible = "allwinner,sun7i-a20-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c00030 0x0c>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-r40-dma",
+				     "allwinner,sun50i-a64-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			dma-channels = <16>;
+			dma-requests = <31>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		csi0: csi@1c09000 {
+			compatible = "allwinner,sun8i-r40-csi0",
+				     "allwinner,sun7i-a20-csi0";
+			reg = <0x01c09000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "isp", "ram";
+			resets = <&ccu RST_BUS_CSI0>;
+			interconnects = <&mbus 5>;
+			interconnect-names = "dma-mem";
+			status = "disabled";
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun8i-r40-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+			<&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+			interconnects = <&mbus 4>;
+			interconnect-names = "dma-mem";
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			pinctrl-0 = <&mmc0_pins>;
+			pinctrl-names = "default";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun8i-r40-emmc",
+				     "allwinner,sun50i-a64-emmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			pinctrl-0 = <&mmc2_pins>;
+			pinctrl-names = "default";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC3>;
+			reset-names = "ahb";
+			pinctrl-0 = <&mmc3_pins>;
+			pinctrl-names = "default";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,sun8i-r40-usb-phy";
+			reg = <0x01c13400 0x14>,
+			      <0x01c14800 0x4>,
+			      <0x01c19800 0x4>,
+			      <0x01c1c800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun8i-r40-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun8i-r40-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+			resets = <&ccu RST_BUS_SATA>;
+			reset-names = "ahci";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c19000 {
+			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+			reg = <0x01c19000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c19400 {
+			compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+			reg = <0x01c19400 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@1c1c000 {
+			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@1c1c400 {
+			compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-r40-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@1c20400 {
+			compatible = "allwinner,sun8i-r40-rtc";
+			reg = <0x01c20400 0x400>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out";
+			clocks = <&osc32k>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-r40-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			can_ph_pins: can-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			can_pa_pins: can-pa-pins {
+				pins = "PA16", "PA17";
+				function = "can";
+			};
+
+			clk_out_a_pin: clk-out-a-pin {
+				pins = "PI12";
+				function = "clk_out_a";
+			};
+
+			/omit-if-no-ref/
+			csi0_8bits_pins: csi0-8bits-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi0_mclk_pin: csi0-mclk-pin {
+				pins = "PE1";
+				function = "csi0";
+			};
+
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3",
+				       "PA4", "PA5", "PA6", "PA7",
+				       "PA8", "PA10", "PA11", "PA12",
+				       "PA13", "PA15", "PA16";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			i2c3_pins: i2c3-pins {
+				pins = "PI0", "PI1";
+				function = "i2c3";
+			};
+
+			i2c4_pins: i2c4-pins {
+				pins = "PI2", "PI3";
+				function = "i2c4";
+			};
+
+			ir0_pins: ir0-pins {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			ir1_pins: ir1-pins {
+				pins = "PB23";
+				function = "ir1";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pg_pins: mmc1-pg-pins {
+				pins = "PG0", "PG1", "PG2",
+				       "PG3", "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC5", "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11", "PC12", "PC13", "PC14",
+				       "PC15", "PC24";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc3_pins: mmc3-pins {
+				pins = "PI4", "PI5", "PI6",
+				       "PI7", "PI8", "PI9";
+				function = "mmc3";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			spi0_pc_pins: spi0-pc-pins {
+				pins = "PC0", "PC1", "PC2";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs0_pc_pin: spi0-cs0-pc-pin {
+				pins = "PC23";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pi_pins: spi1-pi-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs0_pi_pin: spi1-cs0-pi-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs1_pi_pin: spi1-cs1-pi-pin {
+				pins = "PI15";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart2_pi_pins: uart2-pi-pins {
+				pins = "PI18", "PI19";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins {
+				pins = "PI16", "PI17";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart3_pg_pins: uart3-pg-pins {
+				pins = "PG6", "PG7";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins {
+				pins = "PG8", "PG9";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart4_pg_pins: uart4-pg-pins {
+				pins = "PG10", "PG11";
+				function = "uart4";
+			};
+
+			/omit-if-no-ref/
+			uart5_ph_pins: uart5-ph-pins {
+				pins = "PH6", "PH7";
+				function = "uart5";
+			};
+
+			/omit-if-no-ref/
+			uart7_pi_pins: uart7-pi-pins {
+				pins = "PI20", "PI21";
+				function = "uart7";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun8i-r40-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c21800 0x400>;
+			pinctrl-0 = <&ir0_pins>;
+			pinctrl-names = "default";
+			clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_IR0>;
+			status = "disabled";
+		};
+
+		ir1: ir@1c21c00 {
+			compatible = "allwinner,sun8i-r40-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c21c00 0x400>;
+			pinctrl-0 = <&ir1_pins>;
+			pinctrl-names = "default";
+			clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_IR1>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S0>;
+			dmas = <&dma 3>, <&dma 3>;
+			dma-names = "rx", "tx";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S1>;
+			dmas = <&dma 4>, <&dma 4>;
+			dma-names = "rx", "tx";
+		};
+
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S2>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+		};
+
+		ths: thermal-sensor@1c24c00 {
+			compatible = "allwinner,sun8i-r40-ths";
+			reg = <0x01c24c00 0x100>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			/* TODO: add nvmem-cells for calibration */
+			#thermal-sensor-cells = <1>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@1c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART6>;
+			resets = <&ccu RST_BUS_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@1c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART7>;
+			resets = <&ccu RST_BUS_UART7>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@1c2b800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun8i-r40-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CAN>;
+			resets = <&ccu RST_BUS_CAN>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@1c2c000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2c000 0x400>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-r40-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+		};
+
+		gmac: ethernet@1c50000 {
+			compatible = "allwinner,sun8i-r40-gmac";
+			syscon = <&ccu>;
+			reg = <0x01c50000 0x10000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_GMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_GMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			gmac_mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		mbus: dram-controller@1c62000 {
+			compatible = "allwinner,sun8i-r40-mbus";
+			reg = <0x01c62000 0x1000>;
+			clocks = <&ccu 155>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0x80000000>;
+			#interconnect-cells = <1>;
+		};
+
+		tcon_top: tcon-top@1c70000 {
+			compatible = "allwinner,sun8i-r40-tcon-top";
+			reg = <0x01c70000 0x1000>;
+			clocks = <&ccu CLK_BUS_TCON_TOP>,
+				 <&ccu CLK_TCON_TV0>,
+				 <&ccu CLK_TVE0>,
+				 <&ccu CLK_TCON_TV1>,
+				 <&ccu CLK_TVE1>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus",
+				      "tcon-tv0",
+				      "tve0",
+				      "tcon-tv1",
+				      "tve1",
+				      "dsi";
+			clock-output-names = "tcon-top-tv0",
+					     "tcon-top-tv1",
+					     "tcon-top-dsi";
+			resets = <&ccu RST_BUS_TCON_TOP>;
+			#clock-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_top_mixer0_in: port@0 {
+					reg = <0>;
+
+					tcon_top_mixer0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon_top>;
+					};
+				};
+
+				tcon_top_mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
+						reg = <0>;
+					};
+
+					tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
+						reg = <1>;
+					};
+
+					tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
+					};
+
+					tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
+					};
+				};
+
+				tcon_top_mixer1_in: port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					tcon_top_mixer1_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon_top>;
+					};
+				};
+
+				tcon_top_mixer1_out: port@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
+						reg = <0>;
+					};
+
+					tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
+						reg = <1>;
+					};
+
+					tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
+					};
+
+					tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
+					};
+				};
+
+				tcon_top_hdmi_in: port@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+
+					tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_tv0_out_tcon_top>;
+					};
+
+					tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_tv1_out_tcon_top>;
+					};
+				};
+
+				tcon_top_hdmi_out: port@5 {
+					reg = <5>;
+
+					tcon_top_hdmi_out_hdmi: endpoint {
+						remote-endpoint = <&hdmi_in_tcon_top>;
+					};
+				};
+			};
+		};
+
+		tcon_tv0: lcd-controller@1c73000 {
+			compatible = "allwinner,sun8i-r40-tcon-tv";
+			reg = <0x01c73000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV0>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
+					};
+
+					tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
+					};
+				};
+
+				tcon_tv0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_tv0_out_tcon_top: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
+					};
+				};
+			};
+		};
+
+		tcon_tv1: lcd-controller@1c74000 {
+			compatible = "allwinner,sun8i-r40-tcon-tv";
+			reg = <0x01c74000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV1>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_tv1_in_tcon_top_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>;
+					};
+
+					tcon_tv1_in_tcon_top_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>;
+					};
+				};
+
+				tcon_tv1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_tv1_out_tcon_top: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>;
+					};
+				};
+			};
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-r40-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
+			clock-names = "iahb", "isfr", "tmds", "cec";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-r40-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>;
+			clock-names = "bus", "mod", "pll-0", "pll-1";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun8i-reference-design-tablet.dtsi
new file mode 100644
index 000000000000..872d56caa9ce
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-reference-design-tablet.dtsi
@@ -0,0 +1,224 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &r_uart;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		power-supply = <&reg_dc1sw>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	/*
+	 * The gsl1680 is rated at 400KHz and it will not work reliable at
+	 * 100KHz, this has been confirmed on multiple different q8 tablets.
+	 * The gsl1680 is the only device on this bus.
+	 */
+	clock-frequency = <400000>;
+
+	touchscreen: touchscreen@40 {
+		reg = <0x40>;
+		interrupt-parent = <&pio>;
+		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
+		power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+		/* Tablet dts must provide reg and compatible */
+		status = "disabled";
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-touchscreen";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH8 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-impetus.dtsi b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-impetus.dtsi
new file mode 100644
index 000000000000..052b010a5607
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-impetus.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Elimo Impetus SoM";
+	compatible = "elimo,impetus", "sochip,s3", "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-initium.dts
new file mode 100644
index 000000000000..039677c2cc65
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-initium.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
+ */
+
+/dts-v1/;
+#include "sun8i-s3-elimo-impetus.dtsi"
+
+/ {
+	model = "Elimo Initium";
+	compatible = "elimo,initium", "elimo,impetus", "sochip,s3",
+		     "allwinner,sun8i-v3";
+
+	aliases {
+		serial1 = &uart1;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pg_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-s3-lichee-zero-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-lichee-zero-plus.dts
new file mode 100644
index 000000000000..d18192d51d1b
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-lichee-zero-plus.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sipeed Lichee Zero Plus";
+	compatible = "sipeed,lichee-zero-plus", "sochip,s3",
+		     "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
new file mode 100644
index 000000000000..e0d4404b5957
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "PineCube IP Camera";
+	compatible = "pine64,pinecube", "sochip,s3", "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "pine64:ir:led1";
+			gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
+		};
+
+		led2 {
+			label = "pine64:ir:led2";
+			gpios = <&pio 1 12 GPIO_ACTIVE_LOW>; /* PB12 */
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_wifi: vcc-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 1 2 GPIO_ACTIVE_LOW>; /* PB2 WIFI-EN */
+		vin-supply = <&reg_dcdc3>;
+		startup-delay-us = <200000>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&csi1_8bit_pins>;
+	status = "okay";
+
+	port {
+		csi1_ep: endpoint {
+			remote-endpoint = <&ov5640_ep>;
+			bus-width = <8>;
+			hsync-active = <1>; /* Active high */
+			vsync-active = <0>; /* Active low */
+			data-active = <1>;  /* Active high */
+			pclk-sample = <1>;  /* Rising */
+		};
+	};
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pe_pins>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&csi1_mclk_pin>;
+		clocks = <&ccu CLK_CSI1_MCLK>;
+		clock-names = "xclk";
+
+		AVDD-supply = <&reg_ldo3>;
+		DOVDD-supply = <&reg_ldo3>;
+		DVDD-supply = <&reg_ldo4>;
+		reset-gpios = <&pio 4 23 GPIO_ACTIVE_LOW>; /* PE23 */
+		powerdown-gpios = <&pio 4 24 GPIO_ACTIVE_HIGH>; /* PE24 */
+
+		port {
+			ov5640_ep: endpoint {
+				remote-endpoint = <&csi1_ep>;
+				bus-width = <8>;
+				hsync-active = <1>; /* Active high */
+				vsync-active = <0>; /* Active low */
+				data-active = <1>;  /* Active high */
+				pclk-sample = <1>;  /* Rising */
+			};
+		};
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Setup";
+		linux,code = <KEY_SETUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc_wifi>;
+	vqmmc-supply = <&reg_dcdc3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	vcc-pd-supply = <&reg_dcdc3>;
+	vcc-pe-supply = <&reg_ldo3>;
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-sys-cpu-ephy";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-dovdd-2v8-csi";
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts
new file mode 100644
index 000000000000..8b3a75383816
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+
+#include "sun8i-t113s.dtsi"
+#include "sunxi-d1s-t113-mangopi-mq-r.dtsi"
+
+/ {
+	model = "MangoPi MQ-R-T113";
+	compatible = "widora,mangopi-mq-r-t113", "allwinner,sun8i-t113s";
+
+	aliases {
+		ethernet0 = &rtl8189ftv;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&mmc1 {
+	rtl8189ftv: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 = WL_WAKE_AP */
+		interrupt-names = "host-wake";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts
new file mode 100644
index 000000000000..5262102a85f6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s-netcube-nagami.dtsi"
+
+/ {
+	model = "NetCube Systems Nagami Basic Carrier Board";
+	compatible = "netcube,nagami-basic-carrier", "netcube,nagami",
+		     "allwinner,sun8i-t113s";
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	broken-cd;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts
new file mode 100644
index 000000000000..4ffa6a0216d8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s-netcube-nagami.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "NetCube Systems Nagami Keypad Carrier Board";
+	compatible = "netcube,nagami-keypad-carrier", "netcube,nagami",
+		     "allwinner,sun8i-t113s";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status_red: led-status-red {
+			gpios = <&pio 3 16 GPIO_ACTIVE_HIGH>;  /* PD16 */
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led_status_green: led-status-green {
+			gpios = <&pio 3 22 GPIO_ACTIVE_HIGH>;  /* PD22 */
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tca8418: keypad@34 {
+		compatible = "ti,tca8418";
+		reg = <0x34>;
+		interrupts-extended = <&pio 5 6 IRQ_TYPE_EDGE_FALLING>;  /* PF6 */
+		linux,keymap = <MATRIX_KEY(0x03, 0x00, KEY_NUMERIC_A)
+				MATRIX_KEY(0x03, 0x01, KEY_NUMERIC_1)
+				MATRIX_KEY(0x03, 0x02, KEY_NUMERIC_2)
+				MATRIX_KEY(0x03, 0x03, KEY_NUMERIC_3)
+				MATRIX_KEY(0x02, 0x00, KEY_NUMERIC_B)
+				MATRIX_KEY(0x02, 0x01, KEY_NUMERIC_4)
+				MATRIX_KEY(0x02, 0x02, KEY_NUMERIC_5)
+				MATRIX_KEY(0x02, 0x03, KEY_NUMERIC_6)
+				MATRIX_KEY(0x01, 0x00, KEY_NUMERIC_C)
+				MATRIX_KEY(0x01, 0x01, KEY_NUMERIC_7)
+				MATRIX_KEY(0x01, 0x02, KEY_NUMERIC_8)
+				MATRIX_KEY(0x01, 0x03, KEY_NUMERIC_9)
+				MATRIX_KEY(0x00, 0x00, KEY_NUMERIC_D)
+				MATRIX_KEY(0x00, 0x01, KEY_CLEAR)
+				MATRIX_KEY(0x00, 0x02, KEY_NUMERIC_0)
+				MATRIX_KEY(0x00, 0x03, KEY_OK)
+		>;
+		keypad,num-rows = <4>;
+		keypad,num-columns = <4>;
+	};
+};
+
+&pio {
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PB
+			  "", "", "UART3_TX", "UART3_RX",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "eMMC_CLK", "eMMC_CMD", // PC
+			  "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "USB_SEC_EN", "", "",
+			  "", "", "", "",
+			  "LED_STATUS_RED", "", "", "",
+			  "I2C2_SCL", "I2C2_SDA", "LED_STATUS_GREEN", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE
+			  "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "",
+			  "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PF
+			  "", "", "KEY_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD",
+			  "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi
new file mode 100644
index 000000000000..544d60cfc32e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NetCube Systems Nagami SoM";
+	compatible = "netcube,nagami", "allwinner,sun8i-t113s";
+
+	aliases {
+		serial1 = &uart1; // ESP32 Bootloader UART
+		serial3 = &uart3; // Console UART on Card Edge
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	/* module wide 3.3V supply directly from the card edge */
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
+	reg_vcc_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-core";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		vin-supply = <&reg_vcc3v3>;
+	};
+
+	/* USB0 MUX to switch connect to Card-Edge only after BootROM */
+	usb0_sec_mux: mux-controller{
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&pio 3 9 GPIO_ACTIVE_HIGH>; /* PD9 */
+		idle-state = <1>; /* USB connected to Card-Edge by default */
+	};
+
+	/* Reset of ESP32 */
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */
+		post-power-on-delay-ms = <1500>;
+		power-off-delay-us = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&emac {
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+	phy-handle = <&lan8720a>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&rmii_pe_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Default I2C Interface on Card-Edge */
+&i2c2 {
+	pinctrl-0 = <&i2c2_pd_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Exposed as the QWIIC connector and used by the internal EEPROM */
+&i2c3 {
+	pinctrl-0 = <&i2c3_pg_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c02";		/* actually it's a 24AA02E48 */
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@fa {
+			reg = <0xfa 0x06>;
+		};
+	};
+};
+
+/* Default I2S Interface on Card-Edge */
+&i2s1 {
+	pinctrl-0 = <&i2s1_pins>, <&i2s1_din0_pin>, <&i2s1_dout0_pin>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Phy is on SoM. MDI signals pre-magnetics are on the card edge */
+&mdio {
+	lan8720a: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+/* Default SD Interface on Card-Edge */
+&mmc0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Connected to the on-board ESP32 */
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+};
+
+/* Connected to the on-board eMMC */
+&mmc2 {
+	pinctrl-0 = <&mmc2_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pd-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "CAN0_TX", "CAN0_RX", // PB
+			  "CAN1_TX", "CAN1_RX", "UART3_TX", "UART3_RX",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "eMMC_CLK", "eMMC_CMD", // PC
+			  "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "USB_SEC_EN", "SPI1_CS", "SPI1_CLK",
+			  "SPI1_MOSI", "SPI1_MISO", "SPI1_HOLD", "SPI1_WP",
+			  "PD16", "", "", "",
+			  "I2C2_SCL", "I2C2_SDA", "PD22", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE
+			  "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "",
+			  "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SD_D1", "SD_D0", "SD_CLK", "SD_CLK", // PF
+			  "SD_D3", "SD_D2", "PF6", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD",
+			  "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA",
+			  "I2S1_WS", "I2S1_CLK", "I2S1_DIN0", "I2S1_DOUT0",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+/* Remove the unused CK pin from the pinctl as it is unconnected */
+&rmii_pe_pins {
+	pins = "PE0", "PE1", "PE2", "PE3", "PE4",
+	       "PE5", "PE6", "PE8", "PE9";
+};
+
+/* Default SPI Interface on Card-Edge */
+&spi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&spi1_pins>, <&spi1_hold_pin>, <&spi1_wp_pin>;
+	pinctrl-names = "default";
+	cs-gpios = <0>;
+	status = "disabled";
+};
+
+/* Connected to the Bootloader/Console of the ESP32 */
+&uart1 {
+	pinctrl-0 = <&uart1_pg6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Console/Debug UART on Card-Edge */
+&uart3 {
+	pinctrl-0 = <&uart3_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi
new file mode 100644
index 000000000000..c7181308ae6f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#define SOC_PERIPHERAL_IRQ(nr) GIC_SPI nr
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <riscv/allwinner/sunxi-d1s-t113.dtsi>
+#include <riscv/allwinner/sunxi-d1-t113.dtsi>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+		};
+	};
+
+	gic: interrupt-controller@1c81000 {
+		compatible = "arm,gic-400";
+		reg = <0x03021000 0x1000>,
+		      <0x03022000 0x2000>,
+		      <0x03024000 0x2000>,
+		      <0x03026000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/allwinner/sun8i-t3-cqa3t-bv3.dts
new file mode 100644
index 000000000000..9f472521f4a4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t3-cqa3t-bv3.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright (C) 2018 Hao Zhang <hao5781286@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "t3-cqa3t-bv3";
+	compatible = "qihua,t3-cqa3t-bv3", "allwinner,sun8i-t3",
+		     "allwinner,sun8i-r40";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+		enable-active-high;
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo3>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pg";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-dldo3";
+};
+
+&reg_eldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3-sl631-imx179.dts b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631-imx179.dts
new file mode 100644
index 000000000000..117aeece4e55
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631-imx179.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2020 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+#include "sun8i-v3-sl631.dtsi"
+
+/ {
+	model = "SL631 Action Camera with IMX179";
+	compatible = "allwinner,sl631-imx179", "allwinner,sl631",
+		     "allwinner,sun8i-v3";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3-sl631.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631.dtsi
new file mode 100644
index 000000000000..6f93f8c49f84
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2020 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+/dts-v1/;
+
+#include "sun8i-v3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SL631 Action Camera";
+	compatible = "allwinner,sl631", "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pb_pins>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-174 {
+		label = "Down";
+		linux,code = <KEY_DOWN>;
+		channel = <0>;
+		voltage = <174603>;
+	};
+
+	button-384 {
+		label = "Up";
+		linux,code = <KEY_UP>;
+		channel = <0>;
+		voltage = <384126>;
+	};
+
+	button-593 {
+		label = "OK";
+		linux,code = <KEY_OK>;
+		channel = <0>;
+		voltage = <593650>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	vmmc-supply = <&reg_dcdc3>;
+	status = "okay";
+};
+
+&pio {
+	vcc-pd-supply = <&reg_dcdc3>;
+	vcc-pe-supply = <&reg_dcdc3>;
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-sys-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vdd-3v3";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pg_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi
new file mode 100644
index 000000000000..95bd0b616349
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
+ */
+
+#include "sun8i-v3s.dtsi"
+
+/ {
+	soc {
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-v3-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_pins>;
+			resets = <&ccu RST_BUS_I2S0>;
+			status = "disabled";
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-v3-ccu";
+};
+
+&codec_analog {
+	compatible = "allwinner,sun8i-v3-codec-analog",
+		     "allwinner,sun8i-h3-codec-analog";
+};
+
+&emac {
+	/delete-property/ phy-handle;
+	/delete-property/ phy-mode;
+};
+
+&mdio_mux {
+	external_mdio: mdio@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&pio {
+	compatible = "allwinner,sun8i-v3-pinctrl";
+
+	i2s0_pins: i2s0-pins {
+		pins = "PG10", "PG11", "PG12", "PG13";
+		function = "i2s";
+	};
+
+	/omit-if-no-ref/
+	lcd_rgb666_pd_pins: lcd-rgb666-pd-pins {
+		pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
+		       "PD6", "PD7", "PD8", "PD9", "PD10", "PD11",
+		       "PD12", "PD13", "PD14", "PD15", "PD16", "PD17",
+		       "PD18", "PD19", "PD20", "PD21";
+		function = "lcd";
+	};
+
+	uart1_pg_pins: uart1-pg-pins {
+		pins = "PG6", "PG7";
+		function = "uart1";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-anbernic-rg-nano.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-anbernic-rg-nano.dts
new file mode 100644
index 000000000000..f34dfdf1566d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-anbernic-rg-nano.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include "sun8i-v3s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Anbernic RG Nano";
+	compatible = "anbernic,rg-nano", "allwinner,sun8i-v3s";
+
+	aliases {
+		rtc0 = &pcf8563;
+		rtc1 = &rtc;
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1 2 3 8 14 21 32 46 60 80 100>;
+		default-brightness-level = <11>;
+		power-supply = <&reg_vcc5v0>;
+		pwms = <&pwm 0 40000 1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		button-a {
+			gpios = <&gpio_expander 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-A";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio_expander 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-B";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio_expander 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-left {
+			gpios = <&gpio_expander 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-right {
+			gpios = <&gpio_expander 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-se {
+			gpios = <&gpio_expander 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-st {
+			gpios = <&gpio_expander 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-START";
+			linux,code = <BTN_START>;
+		};
+
+		button-tl {
+			gpios = <&gpio_expander 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-L";
+			linux,code = <BTN_TL>;
+		};
+
+		button-tr {
+			gpios = <&gpio_expander 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-R";
+			linux,code = <BTN_TR>;
+		};
+
+		button-up {
+			gpios = <&gpio_expander 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio_expander 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-X";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio_expander 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-Y";
+			linux,code = <BTN_WEST>;
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Speaker", "HP",
+				  "MIC1", "Mic",
+				  "Mic", "HBIAS";
+	allwinner,pa-gpios = <&pio 5 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PF6 */
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	gpio_expander: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <1 3 IRQ_TYPE_EDGE_BOTH>; /* PB3/EINT3 */
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&pio>;
+		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5/EINT5 */
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	spi0_no_miso_pins: spi0-no-miso-pins {
+		pins = "PC1", "PC2", "PC3";
+		function = "spi0";
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm0_pin>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* DCDC2 wired into vdd-cpu, vdd-sys, and vdd-ephy. */
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-max-microvolt = <1250000>;
+	regulator-min-microvolt = <1250000>;
+	regulator-name = "vdd-cpu";
+};
+
+/* DCDC3 wired into every 3.3v input that isn't the RTC. */
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-max-microvolt = <3300000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+/* LDO1 wired into RTC, voltage is hard-wired at 3.3v. */
+&reg_ldo1 {
+	regulator-always-on;
+	regulator-name = "vcc-rtc";
+};
+
+/* LDO2 wired into VCC-PLL and audio codec. */
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-max-microvolt = <3000000>;
+	regulator-min-microvolt = <3000000>;
+	regulator-name = "vcc-pll";
+};
+
+/* LDO3, LDO4, and LDO5 unused. */
+&reg_ldo3 {
+	status = "disabled";
+};
+
+&reg_ldo4 {
+	status = "disabled";
+};
+
+/* RTC uses internal oscillator */
+&rtc {
+	/delete-property/ clocks;
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_no_miso_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display@0 {
+		compatible = "saef,sftc154b", "panel-mipi-dbi-spi";
+		reg = <0>;
+		backlight = <&backlight>;
+		dc-gpios = <&pio 2 0 GPIO_ACTIVE_HIGH>; /* PC0 */
+		reset-gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+		spi-max-frequency = <100000000>;
+
+		height-mm = <39>;
+		width-mm = <39>;
+
+		/* Set hb-porch to compensate for non-visible area */
+		panel-timing {
+			hactive = <240>;
+			vactive = <240>;
+			hback-porch = <80>;
+			vback-porch = <0>;
+			clock-frequency = <0>;
+			hfront-porch = <0>;
+			hsync-len = <0>;
+			vfront-porch = <0>;
+			vsync-len = <0>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG5 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero-dock.dts
new file mode 100644
index 000000000000..752ad05c8f83
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero-dock.dts
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-v3s-licheepi-zero.dts"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Lichee Pi Zero with Dock";
+	compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero",
+		     "allwinner,sun8i-v3s";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	leds {
+		/* The LEDs use PG0~2 pins, which conflict with MMC1 */
+		status = "disabled";
+	};
+};
+
+&emac {
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button-600 {
+		label = "Select";
+		linux,code = <KEY_SELECT>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Start";
+		linux,code = <KEY_OK>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+};
+
+&mmc1 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero.dts
new file mode 100644
index 000000000000..2e4587d26ce5
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-v3s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Lichee Pi Zero";
+	compatible = "licheepi,licheepi-zero", "allwinner,sun8i-v3s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue_led {
+			label = "licheepi:blue:usr";
+			gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+		};
+
+		green_led {
+			label = "licheepi:green:usr";
+			gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+			default-state = "on";
+		};
+
+		red_led {
+			label = "licheepi:red:usr";
+			gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */
+		};
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
new file mode 100644
index 000000000000..cb6292319f39
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-v3s.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/{
+	model = "NetCube Systems Kumquat";
+	compatible = "netcube,kumquat", "allwinner,sun8i-v3s";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &emac;
+		rtc0 = &ds3232;
+		rtc1 = &rtc; /* not battery backed */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* 40 MHz Crystal Oscillator on PCB */
+	clk_can0: clock-can0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-user {
+			label = "GPIO Key User";
+			linux,code = <KEY_PROG1>;
+			gpios = <&pio 1 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PB2 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-heartbeat {
+			gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
+			linux,default-trigger = "heartbeat";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-mmc0-act {
+			gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+			linux,default-trigger = "mmc0";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK;
+		};
+	};
+
+	/* EA3036C Switching 3 Channel Regulator - Channel 2 */
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* K7805-1000R3 Switching Regulator supplied from main 12/24V terminal block */
+	reg_vcc5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"MIC1", "Mic",
+		"Mic", "HBIAS";
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&emac {
+	allwinner,leds-active-low;
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c02";		/* actually it's a 24AA02E48 */
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@fa {
+			reg = <0xfa 0x06>;
+		};
+	};
+
+	tusb320: typec@60 {
+		compatible = "ti,tusb320";
+		reg = <0x60>;
+		interrupts-extended = <&pio 1 5 IRQ_TYPE_LEVEL_LOW>;  /* PB5 */
+	};
+
+	ds3232: rtc@68 {
+		compatible = "dallas,ds3232";
+		reg = <0x68>;
+	};
+};
+
+/* Exposed as the Flash/SD Header on the board */
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+/* Connected to the on-board ESP32 */
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+/* Disable external 32k osc as it is broken on current revision */
+&osc32k {
+	status = "disabled";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "CAN_nCS", "CAN_nINT", "USER_SW", "PB3", // PB
+			  "USB_ID", "USBC_nINT", "I2C0_SCL", "I2C0_SDA",
+			  "UART0_TX", "UART0_RX", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SPI_MISO", "SPI_SCK", "FLASH_nCS", "SPI_MOSI", // PC
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "Q12", "Q11", "Q10", "Q9", // PE
+			  "LED_SYS0", "I1", "Q1", "Q2",
+			  "I2", "I3", "Q3", "Q4",
+			  "I4", "I5", "Q5", "Q6",
+			  "I6", "I7", "Q7", "Q8",
+			  "I8", "UART1_TXD", "UART1_RXD", "ESP_nRST",
+			  "ESP_nBOOT", "", "", "",
+			  "", "", "", "",
+			  "SD_D1", "SD_D0", "SD_CLK", "SD_CMD", // PF
+			  "SD_D3", "SD_D2", "LED_SYS1", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+/* Disable external 32k osc as it is broken on current revision */
+&rtc {
+	/delete-property/ clocks;
+};
+
+/* Exposed as a USB-C connector with USB-Serial converter */
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Connected to the Bootloader/Console of the ESP32 */
+&uart1 {
+	pinctrl-0 = <&uart1_pe_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	extcon = <&tusb320 0>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	status = "okay";
+};
+
+&spi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <0>, <&pio 1 0 GPIO_ACTIVE_LOW>; /* PB0 */
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		label = "firmware";
+		spi-max-frequency = <40000000>;
+	};
+
+	can@1 {
+		compatible = "microchip,mcp2518fd";
+		reg = <1>;
+		clocks = <&clk_can0>;
+		interrupts-extended = <&pio 1 1 IRQ_TYPE_LEVEL_LOW>;  /* PB1 */
+		spi-max-frequency = <20000000>;
+		vdd-supply = <&reg_vcc3v3>;
+		xceiver-supply = <&reg_vcc3v3>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
new file mode 100644
index 000000000000..fa54510319ac
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
@@ -0,0 +1,671 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-v3s-ccu.h>
+#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer0-lcd0";
+			clocks = <&display_clocks CLK_MIXER0>,
+				 <&ccu CLK_TCON0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-v3s-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext-osc32k";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-v3s-de2-clk";
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-v3s-de2-mixer";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks 0>,
+				 <&display_clocks 6>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-v3s-system-control",
+				     "allwinner,sun8i-h3-system-control";
+			reg = <0x01c00000 0xd0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+		};
+
+		nmi_intc: interrupt-controller@1c000d0 {
+			compatible = "allwinner,sun8i-v3s-nmi",
+				     "allwinner,sun9i-a80-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c000d0 0x0c>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-v3s-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-v3s-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>,
+				 <&ccu CLK_TCON0>;
+			clock-names = "ahb",
+				      "tcon-ch0";
+			clock-output-names = "tcon-data-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		crypto@1c15000 {
+			compatible = "allwinner,sun8i-v3s-crypto",
+				     "allwinner,sun8i-a33-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 16>, <&dma 16>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_CE>;
+			reset-names = "ahb";
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-h3-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun8i-v3s-usb-phy";
+			reg = <0x01c19400 0x2c>,
+			      <0x01c1a800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci: usb@1c1a000 {
+			compatible = "allwinner,sun8i-v3s-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci: usb@1c1a400 {
+			compatible = "allwinner,sun8i-v3s-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-v3s-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@1c20400 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-v3-rtc";
+			reg = <0x01c20400 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc32k>;
+			clock-output-names = "osc32k", "osc32k-out";
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-v3s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			/omit-if-no-ref/
+			csi0_mclk_pin: csi0-mclk-pin {
+				pins = "PE20";
+				function = "csi_mipi";
+			};
+
+			/omit-if-no-ref/
+			csi1_8bit_pins: csi1-8bit-pins {
+				pins = "PE0", "PE2", "PE3", "PE8", "PE9",
+				       "PE10", "PE11", "PE12", "PE13", "PE14",
+				       "PE15";
+				function = "csi";
+			};
+
+			/omit-if-no-ref/
+			csi1_mclk_pin: csi1-mclk-pin {
+				pins = "PE1";
+				function = "csi";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB6", "PB7";
+				function = "i2c0";
+			};
+
+			/omit-if-no-ref/
+			i2c1_pb_pins: i2c1-pb-pins {
+				pins = "PB8", "PB9";
+				function = "i2c1";
+			};
+
+			/omit-if-no-ref/
+			i2c1_pe_pins: i2c1-pe-pins {
+				pins = "PE21", "PE22";
+				function = "i2c1";
+			};
+
+			/omit-if-no-ref/
+			lcd_rgb666_pe_pins: lcd-rgb666-pe-pins {
+				pins = "PE0", "PE1", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10", "PE11",
+				       "PE12", "PE13", "PE14", "PE15", "PE16", "PE17",
+				       "PE18", "PE19", "PE23", "PE24";
+				function = "lcd";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB8", "PB9";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pe_pins: uart1-pe-pins {
+				pins = "PE21", "PE22";
+				function = "uart1";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "PB0", "PB1";
+				function = "uart2";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			pwm0_pin: pwm0-pin {
+				pins = "PB4";
+				function = "pwm0";
+			};
+
+			/omit-if-no-ref/
+			pwm1_pin: pwm1-pin {
+				pins = "PB5";
+				function = "pwm1";
+			};
+
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-v3s-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun8i-v3s-pwm",
+				     "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21400 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-v3s-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
+			status = "disabled";
+		};
+
+		codec_analog: codec-analog@1c23000 {
+			compatible = "allwinner,sun8i-v3s-codec-analog";
+			reg = <0x01c23000 0x4>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "tx", "rx";
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "tx", "rx";
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "tx", "rx";
+			resets = <&ccu RST_BUS_UART2>;
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-v3s-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			phy-handle = <&int_mii_phy>;
+			phy-mode = "mii";
+			status = "disabled";
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+
+			mdio_mux: mdio-mux {
+				compatible = "allwinner,sun8i-h3-mdio-mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio-parent-bus = <&mdio>;
+				/* Only one MDIO is usable at the time */
+				internal_mdio: mdio@1 {
+					compatible = "allwinner,sun8i-h3-mdio-internal";
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					int_mii_phy: ethernet-phy@1 {
+						compatible = "ethernet-phy-ieee802.3-c22";
+						reg = <1>;
+						clocks = <&ccu CLK_BUS_EPHY>;
+						resets = <&ccu RST_BUS_EPHY>;
+					};
+				};
+			};
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		csi1: camera@1cb4000 {
+			compatible = "allwinner,sun8i-v3s-csi";
+			reg = <0x01cb4000 0x3000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts
new file mode 100644
index 000000000000..6575ef274453
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts
@@ -0,0 +1,310 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Banana Pi M2 Berry";
+	compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40";
+
+	aliases {
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr-led {
+			label = "bananapi:red:pwr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user-led {
+			label = "bananapi:green:user";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+		enable-active-high;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo3>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	/* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo2>;
+	vqmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-gmac-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+/*
+ * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same
+ * time, with the two being in sync, to be able to meet maximum power
+ * consumption during transmits. Since this is not really supported
+ * right now, just use the two as always on, and we will fix it later.
+ */
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd1v2-sata";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo2>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		/* TODO host wake line connected to PMIC GPIO pins */
+		shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+		max-speed = <1500000>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
new file mode 100644
index 000000000000..52ad95a2063a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
@@ -0,0 +1,508 @@
+/*
+ * Copyright 2015 Tyler Baker
+ *
+ * Tyler Baker <tyler.baker@linaro.org>
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun9i-a80.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cubietech Cubieboard4";
+	compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "cubieboard4:green:usr";
+			gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
+		};
+
+		led-1 {
+			label = "cubieboard4:red:usr";
+			gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		};
+	};
+
+	vga-connector {
+		compatible = "vga-connector";
+		label = "vga";
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_dac_out>;
+			};
+		};
+	};
+
+	vga-dac {
+		compatible = "corpro,gm7123", "adi,adv7123";
+		vdd-supply = <&reg_dcdc1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_dac_in: endpoint {
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_dac_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_cldo1>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH18 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_cldo3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc1_pins {
+	bias-pull-up;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+};
+
+&osc32k {
+	/* osc32k input is from AC100 */
+	clocks = <&ac100_rtc 0>;
+};
+
+&pio {
+	vcc-pa-supply = <&reg_ldo_io1>;
+	vcc-pb-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dc1sw>;
+	vcc-pe-supply = <&reg_eldo2>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_ldo_io0>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_dldo2>;
+	vcc-pm-supply = <&reg_eldo3>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp809: pmic@3a3 {
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				/*
+				 * TODO: This should be handled by the
+				 * USB PHY driver.
+				 */
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc33-usbh";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pb-io-cam";
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_dc1sw: dc1sw {
+				regulator-name = "vcc-pd";
+			};
+
+			reg_dc5ldo: dc5ldo {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpus-09-usbh";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-3v";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpua";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-sys-usb0-hdmi";
+			};
+
+			reg_dcdc5: dcdc5 {
+				regulator-always-on;
+				regulator-min-microvolt = <1450000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dldo1: dldo1 {
+				/*
+				 * The WiFi chip supports a wide range
+				 * (3.0 ~ 4.8V) of voltages, and so does
+				 * this regulator (3.0 ~ 4.2V), but
+				 * Allwinner SDK always sets it to 3.3V.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_dldo2: dldo2 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_eldo1: eldo1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dvdd-cam";
+			};
+
+			reg_eldo2: eldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_eldo3: eldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pm-codec-io1";
+			};
+
+			reg_ldo_io0: ldo_io0 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pg";
+			};
+
+			reg_ldo_io1: ldo_io1 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vcc-pa-gmac-2v5";
+			};
+
+			reg_rtc_ldo: rtc_ldo {
+				regulator-name = "vcc-rtc-vdd1v8-io";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
+	axp806: pmic@745 {
+		compatible = "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		bldoin-supply = <&reg_dcdce>;
+
+		regulators {
+			reg_s_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "avcc";
+			};
+
+			aldo2 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo2";
+			};
+
+			aldo3 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo3";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name = "vcc18-efuse-adc-display-csi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name =
+					"vdd18-drampll-vcc18-pll-cpvdd";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			reg_bldo4: bldo4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vcc12-hsic";
+			};
+
+			reg_cldo1: cldo1 {
+				/*
+				 * This was 3V in the original design, but
+				 * 3.3V is the recommended supply voltage
+				 * for the Ethernet PHY.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				/*
+				 * The PHY requires 20ms after all voltages
+				 * are applied until core logic is ready and
+				 * 30ms after the reset pin is de-asserted.
+				 * Set a 100ms delay to account for PMIC
+				 * ramp time and board traces.
+				 */
+				regulator-enable-ramp-delay = <100000>;
+				regulator-name = "vcc-gmac-phy";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "afvcc-cam";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-io-wifi-codec-io2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-vpu";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-name = "vcc-bldo-codec-ldoin";
+			};
+
+			sw {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's sw
+				 */
+				regulator-name = "s_sw";
+			};
+		};
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&nmi_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp809.dtsi"
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd0_rgb888_pins>;
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint {
+		remote-endpoint = <&vga_dac_in>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun9i-a80-optimus.dts b/arch/arm/boot/dts/allwinner/sun9i-a80-optimus.dts
new file mode 100644
index 000000000000..5c3580d712e4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80-optimus.dts
@@ -0,0 +1,510 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun9i-a80.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Merrii A80 Optimus Board";
+	compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* The LED names match those found on the board */
+		led2 {
+			label = "optimus:led2:usr";
+			gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led3 {
+			label = "optimus:led3:usr";
+			gpios = <&r_pio 1 15 GPIO_ACTIVE_HIGH>; /* PM15 */
+		};
+
+		led4 {
+			label = "optimus:led4:usr";
+			gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	};
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	/* Enable if HSIC peripheral is connected */
+	status = "disabled";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_cldo1>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH8 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_cldo3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc1_pins {
+	bias-pull-up;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&osc32k {
+	/* osc32k input is from AC100 */
+	clocks = <&ac100_rtc 0>;
+};
+
+&pio {
+	vcc-pa-supply = <&reg_ldo_io1>;
+	vcc-pb-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_eldo2>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_ldo_io0>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_dldo2>;
+	vcc-pm-supply = <&reg_eldo3>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp809: pmic@3a3 {
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				/*
+				 * TODO: This should be handled by the
+				 * USB PHY driver.
+				 */
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc33-usbh";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pb-io-cam";
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_dc5ldo: dc5ldo {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpus-09-usbh";
+			};
+
+			dc1sw {
+				/* unused */
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-3v";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpua";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-sys-usb0-hdmi";
+			};
+
+			reg_dcdc5: dcdc5 {
+				regulator-always-on;
+				regulator-min-microvolt = <1425000>;
+				regulator-max-microvolt = <1575000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dldo1: dldo1 {
+				/*
+				 * The WiFi chip supports a wide range
+				 * (3.0 ~ 4.8V) of voltages, and so does
+				 * this regulator (3.0 ~ 4.2V), but
+				 * Allwinner SDK always sets it to 3.3V.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_dldo2: dldo2 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_eldo1: eldo1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dvdd-cam";
+			};
+
+			reg_eldo2: eldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_eldo3: eldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pm-codec-io1";
+			};
+
+			reg_ldo_io0: ldo_io0 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pg";
+			};
+
+			reg_ldo_io1: ldo_io1 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vcc-pa-gmac-2v5";
+			};
+
+			reg_rtc_ldo: rtc_ldo {
+				regulator-name = "vcc-rtc-vdd1v8-io";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
+	axp806: pmic@745 {
+		compatible = "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		bldoin-supply = <&reg_dcdce>;
+
+		regulators {
+			reg_s_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "avcc";
+			};
+
+			aldo2 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo2";
+			};
+
+			aldo3 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo3";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name = "vcc18-efuse-adc-display-csi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name =
+					"vdd18-drampll-vcc18-pll-cpvdd";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			reg_bldo4: bldo4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vcc12-hsic";
+			};
+
+			reg_cldo1: cldo1 {
+				/*
+				 * This was 3V in the original design, but
+				 * 3.3V is the recommended supply voltage
+				 * for the Ethernet PHY.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				/*
+				 * The PHY requires 20ms after all voltages
+				 * are applied until core logic is ready and
+				 * 30ms after the reset pin is de-asserted.
+				 * Set a 100ms delay to account for PMIC
+				 * ramp time and board traces.
+				 */
+				regulator-enable-ramp-delay = <100000>;
+				regulator-name = "vcc-gmac-phy";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "afvcc-cam";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-io-wifi-codec-io2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-vpu";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-name = "vcc-bldo-codec-ldoin";
+			};
+
+			sw {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's sw
+				 */
+				regulator-name = "s_sw";
+			};
+		};
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&nmi_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp809.dtsi"
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy1 {
+	phy-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy2 {
+	phy-supply = <&reg_bldo4>;
+	/* Enable if HSIC peripheral is connected */
+	status = "disabled";
+};
+
+&usbphy3 {
+	phy-supply = <&reg_usb3_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
new file mode 100644
index 000000000000..a1ae0929cec9
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
@@ -0,0 +1,1253 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/clock/sun9i-a80-ccu.h>
+#include <dt-bindings/clock/sun9i-a80-de.h>
+#include <dt-bindings/clock/sun9i-a80-usb.h>
+#include <dt-bindings/reset/sun9i-a80-ccu.h>
+#include <dt-bindings/reset/sun9i-a80-de.h>
+#include <dt-bindings/reset/sun9i-a80-usb.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		ethernet0 = &gmac;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x1>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x3>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x100>;
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x101>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x102>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x103>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/*
+		 * map 64 bit address range down to 32 bits,
+		 * as the peripherals are all under 512MB.
+		 */
+		ranges = <0 0 0 0x20000000>;
+
+		/*
+		 * This clock is actually configurable from the PRCM address
+		 * space. The external 24M oscillator can be turned off, and
+		 * the clock switched to an internal 16M RC oscillator. Under
+		 * normal operation there's no reason to do this, and the
+		 * default is to use the external good one, so just model this
+		 * as a fixed clock. Also it is not entirely clear if the
+		 * osc24M mux in the PRCM affects the entire clock tree, which
+		 * would also throw all the PLL clock rates off, or just the
+		 * downstream clocks in the PRCM.
+		 */
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		/*
+		 * The 32k clock is from an external source, normally the
+		 * AC100 codec/RTC chip. This serves as a placeholder for
+		 * board dts files to specify the source.
+		 */
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clock-output-names = "osc32k";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
+		 */
+		mii_phy_tx_clk: mii-phy-tx-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: gmac-int-tx-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@800030 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x00800030 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+
+		cpus_clk: clk@8001410 {
+			compatible = "allwinner,sun9i-a80-cpus-clk";
+			reg = <0x08001410 0x4>;
+			#clock-cells = <0>;
+			clocks = <&osc32k>, <&osc24M>,
+				 <&ccu CLK_PLL_PERIPH0>,
+				 <&ccu CLK_PLL_AUDIO>;
+			clock-output-names = "cpus";
+		};
+
+		ahbs: clk-ahbs {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&cpus_clk>;
+			clock-output-names = "ahbs";
+		};
+
+		apbs: clk@800141c {
+			compatible = "allwinner,sun8i-a23-apb0-clk";
+			reg = <0x0800141c 0x4>;
+			#clock-cells = <0>;
+			clocks = <&ahbs>;
+			clock-output-names = "apbs";
+		};
+
+		apbs_gates: clk@8001428 {
+			compatible = "allwinner,sun9i-a80-apbs-gates-clk";
+			reg = <0x08001428 0x4>;
+			#clock-cells = <1>;
+			clocks = <&apbs>;
+			clock-indices = <0>, <1>,
+					<2>, <3>,
+					<4>, <5>,
+					<6>, <7>,
+					<12>, <13>,
+					<16>, <17>,
+					<18>, <20>;
+			clock-output-names = "apbs_pio", "apbs_ir",
+					"apbs_timer", "apbs_rsb",
+					"apbs_uart", "apbs_1wire",
+					"apbs_i2c0", "apbs_i2c1",
+					"apbs_ps2_0", "apbs_ps2_1",
+					"apbs_dma", "apbs_i2s0",
+					"apbs_i2s1", "apbs_twd";
+		};
+
+		r_1wire_clk: clk@8001450 {
+			reg = <0x08001450 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_1wire";
+		};
+
+		r_ir_clk: clk@8001454 {
+			reg = <0x08001454 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_ir";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun9i-a80-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	soc@20000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/*
+		 * map 64 bit address range down to 32 bits,
+		 * as the peripherals are all under 512MB.
+		 */
+		ranges = <0 0 0 0x20000000>;
+
+		sram_b: sram@20000 {
+			/* 256 KiB secure SRAM at 0x20000 */
+			compatible = "mmio-sram";
+			reg = <0x00020000 0x40000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00020000 0x40000>;
+
+			smp-sram@1000 {
+				/*
+				 * This is checked by BROM to determine if
+				 * cpu0 should jump to SMP entry vector
+				 */
+				compatible = "allwinner,sun9i-a80-smp-sram";
+				reg = <0x1000 0x8>;
+			};
+		};
+
+		gmac: ethernet@830000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x00830000 0x1054>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_BUS_GMAC>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			resets = <&ccu RST_BUS_GMAC>;
+			reset-names = "stmmaceth";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		ehci0: usb@a00000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a00000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI0>;
+			resets = <&usb_clocks RST_USB0_HCI>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@a00400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a00400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI0>,
+				 <&usb_clocks CLK_USB_OHCI0>;
+			resets = <&usb_clocks RST_USB0_HCI>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy1: phy@a00800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a00800 0x4>;
+			clocks = <&usb_clocks CLK_USB0_PHY>;
+			clock-names = "phy";
+			resets = <&usb_clocks RST_USB0_PHY>;
+			reset-names = "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		ehci1: usb@a01000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a01000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI1>;
+			resets = <&usb_clocks RST_USB1_HCI>;
+			phys = <&usbphy2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy2: phy@a01800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a01800 0x4>;
+			clocks = <&usb_clocks CLK_USB1_PHY>,
+				 <&usb_clocks CLK_USB_HSIC>,
+				 <&usb_clocks CLK_USB1_HSIC>;
+			clock-names = "phy",
+				      "hsic_12M",
+				      "hsic_480M";
+			resets = <&usb_clocks RST_USB1_PHY>,
+				 <&usb_clocks RST_USB1_HSIC>;
+			reset-names = "phy",
+				      "hsic";
+			status = "disabled";
+			#phy-cells = <0>;
+			/* usb1 is always used with HSIC */
+			phy_type = "hsic";
+		};
+
+		ehci2: usb@a02000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a02000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI2>;
+			resets = <&usb_clocks RST_USB2_HCI>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@a02400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a02400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI2>,
+				 <&usb_clocks CLK_USB_OHCI2>;
+			resets = <&usb_clocks RST_USB2_HCI>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy3: phy@a02800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a02800 0x4>;
+			clocks = <&usb_clocks CLK_USB2_PHY>,
+				 <&usb_clocks CLK_USB_HSIC>,
+				 <&usb_clocks CLK_USB2_HSIC>;
+			clock-names = "phy",
+				      "hsic_12M",
+				      "hsic_480M";
+			resets = <&usb_clocks RST_USB2_PHY>,
+				 <&usb_clocks RST_USB2_HSIC>;
+			reset-names = "phy",
+				      "hsic";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		usb_clocks: clock@a08000 {
+			compatible = "allwinner,sun9i-a80-usb-clks";
+			reg = <0x00a08000 0x8>;
+			clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+			clock-names = "bus", "hosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		cpucfg@1700000 {
+			compatible = "allwinner,sun9i-a80-cpucfg";
+			reg = <0x01700000 0x100>;
+		};
+
+		crypto: crypto@1c02000 {
+			compatible = "allwinner,sun9i-a80-crypto";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_SS>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+			clock-names = "bus", "mod";
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 3>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc_config_clk: clk@1c13000 {
+			compatible = "allwinner,sun9i-a80-mmc-config-clk";
+			reg = <0x01c13000 0x10>;
+			clocks = <&ccu CLK_BUS_MMC>;
+			resets = <&ccu RST_BUS_MMC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clock-output-names = "mmc0_config", "mmc1_config",
+					     "mmc2_config", "mmc3_config";
+		};
+
+		gic: interrupt-controller@1c41000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c41000 0x1000>,
+			      <0x01c42000 0x2000>,
+			      <0x01c44000 0x2000>,
+			      <0x01c46000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		cci: cci@1c90000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01c90000 0x1000>;
+			ranges = <0x0 0x01c90000 0x10000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				 compatible = "arm,cci-400-pmu,r1";
+				 reg = <0x9000 0x5000>;
+				 interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		de_clocks: clock@3000000 {
+			compatible = "allwinner,sun9i-a80-de-clks";
+			reg = <0x03000000 0x30>;
+			clocks = <&ccu CLK_DE>,
+				 <&ccu CLK_SDRAM>,
+				 <&ccu CLK_BUS_DE>;
+			clock-names = "mod",
+				      "dram",
+				      "bus";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		fe0: display-frontend@3100000 {
+			compatible = "allwinner,sun9i-a80-display-frontend";
+			reg = <0x03100000 0x40000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_FE0>, <&de_clocks CLK_FE0>,
+				 <&de_clocks CLK_DRAM_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					reg = <1>;
+
+					fe0_out_deu0: endpoint {
+						remote-endpoint = <&deu0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@3140000 {
+			compatible = "allwinner,sun9i-a80-display-frontend";
+			reg = <0x03140000 0x40000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_FE1>, <&de_clocks CLK_FE1>,
+				 <&de_clocks CLK_DRAM_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					reg = <1>;
+
+					fe1_out_deu1: endpoint {
+						remote-endpoint = <&deu1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@3200000 {
+			compatible = "allwinner,sun9i-a80-display-backend";
+			reg = <0x03200000 0x40000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_BE0>, <&de_clocks CLK_BE0>,
+				 <&de_clocks CLK_DRAM_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_deu0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&deu0_out_be0>;
+					};
+
+					be0_in_deu1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&deu1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					reg = <1>;
+
+					be0_out_drc0: endpoint {
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@3240000 {
+			compatible = "allwinner,sun9i-a80-display-backend";
+			reg = <0x03240000 0x40000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_BE1>, <&de_clocks CLK_BE1>,
+				 <&de_clocks CLK_DRAM_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_deu0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&deu0_out_be1>;
+					};
+
+					be1_in_deu1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&deu1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					reg = <1>;
+
+					be1_out_drc1: endpoint {
+						remote-endpoint = <&drc1_in_be1>;
+					};
+				};
+			};
+		};
+
+		deu0: deu@3300000 {
+			compatible = "allwinner,sun9i-a80-deu";
+			reg = <0x03300000 0x40000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DEU0>,
+				 <&de_clocks CLK_IEP_DEU0>,
+				 <&de_clocks CLK_DRAM_DEU0>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DEU0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				deu0_in: port@0 {
+					reg = <0>;
+
+					deu0_in_fe0: endpoint {
+						remote-endpoint = <&fe0_out_deu0>;
+					};
+				};
+
+				deu0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					deu0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_deu0>;
+					};
+
+					deu0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_deu0>;
+					};
+				};
+			};
+		};
+
+		deu1: deu@3340000 {
+			compatible = "allwinner,sun9i-a80-deu";
+			reg = <0x03340000 0x40000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DEU1>,
+				 <&de_clocks CLK_IEP_DEU1>,
+				 <&de_clocks CLK_DRAM_DEU1>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DEU1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				deu1_in: port@0 {
+					reg = <0>;
+
+					deu1_in_fe1: endpoint {
+						remote-endpoint = <&fe1_out_deu1>;
+					};
+				};
+
+				deu1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					deu1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_deu1>;
+					};
+
+					deu1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_deu1>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@3400000 {
+			compatible = "allwinner,sun9i-a80-drc";
+			reg = <0x03400000 0x40000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DRC0>,
+				 <&de_clocks CLK_IEP_DRC0>,
+				 <&de_clocks CLK_DRAM_DRC0>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DRC0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					reg = <0>;
+
+					drc0_in_be0: endpoint {
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
+		};
+
+		drc1: drc@3440000 {
+			compatible = "allwinner,sun9i-a80-drc";
+			reg = <0x03440000 0x40000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DRC1>,
+				 <&de_clocks CLK_IEP_DRC1>,
+				 <&de_clocks CLK_DRAM_DRC1>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DRC1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc1_in: port@0 {
+					reg = <0>;
+
+					drc1_in_be1: endpoint {
+						remote-endpoint = <&be1_out_drc1>;
+					};
+				};
+
+				drc1_out: port@1 {
+					reg = <1>;
+
+					drc1_out_tcon1: endpoint {
+						remote-endpoint = <&tcon1_in_drc1>;
+					};
+				};
+			};
+		};
+
+		tcon0: lcd-controller@3c00000 {
+			compatible = "allwinner,sun9i-a80-tcon-lcd";
+			reg = <0x03c00000 0x10000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
+			clock-names = "ahb", "tcon-ch0";
+			resets = <&ccu RST_BUS_LCD0>,
+				 <&ccu RST_BUS_EDP>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "edp",
+				      "lvds";
+			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint {
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		tcon1: lcd-controller@3c10000 {
+			compatible = "allwinner,sun9i-a80-tcon-tv";
+			reg = <0x03c10000 0x10000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LCD1>, <&ccu CLK_LCD1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_LCD1>, <&ccu RST_BUS_EDP>;
+			reset-names = "lcd", "edp";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					reg = <0>;
+
+					tcon1_in_drc1: endpoint {
+						remote-endpoint = <&drc1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		ccu: clock@6000000 {
+			compatible = "allwinner,sun9i-a80-ccu";
+			reg = <0x06000000 0x800>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		timer@6000c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x06000c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@6000ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x06000ca0 0x20>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		pio: pinctrl@6000800 {
+			compatible = "allwinner,sun9i-a80-pinctrl";
+			reg = <0x06000800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5",
+				       "PA7", "PA8", "PA9", "PA10", "PA12",
+				       "PA13", "PA15", "PA16", "PA17";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pins = "PG10", "PG11";
+				function = "i2c3";
+			};
+
+			lcd0_rgb888_pins: lcd0-rgb888-pins {
+				pins = "PD0", "PD1", "PD2", "PD3",
+				       "PD4", "PD5", "PD6", "PD7",
+				       "PD8", "PD9", "PD10", "PD11",
+				       "PD12", "PD13", "PD14", "PD15",
+				       "PD16", "PD17", "PD18", "PD19",
+				       "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1" ,"PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1" ,"PG2", "PG3",
+						 "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11", "PC12",
+				       "PC13", "PC14", "PC15",
+				       "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			uart0_ph_pins: uart0-ph-pins {
+				pins = "PH12", "PH13";
+				function = "uart0";
+			};
+
+			uart4_pins: uart4-pins {
+				pins = "PG12", "PG13", "PG14", "PG15";
+				function = "uart4";
+			};
+		};
+
+		uart0: serial@7000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@7000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@7000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@7000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@7001000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07001000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@7001400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07001400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7002800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07002800 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@7002c00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07002c00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@7003000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@7003400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@7003800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003800 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_wdt: watchdog@8001000 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x08001000 0x20>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		prcm@8001400 {
+			compatible = "allwinner,sun9i-a80-prcm";
+			reg = <0x08001400 0x200>;
+		};
+
+		apbs_rst: reset@80014b0 {
+			reg = <0x080014b0 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
+		nmi_intc: interrupt-controller@80015a0 {
+			compatible = "allwinner,sun9i-a80-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x080015a0 0xc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ir: ir@8002000 {
+			compatible = "allwinner,sun6i-a31-ir";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_ir_pins>;
+			clocks = <&apbs_gates 1>, <&r_ir_clk>;
+			clock-names = "apb", "ir";
+			resets = <&apbs_rst 1>;
+			reg = <0x08002000 0x40>;
+			status = "disabled";
+		};
+
+		r_uart: serial@8002800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x08002800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apbs_gates 4>;
+			resets = <&apbs_rst 4>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@8002c00 {
+			compatible = "allwinner,sun9i-a80-r-pinctrl";
+			reg = <0x08002c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			r_ir_pins: r-ir-pins {
+				pins = "PL6";
+				function = "s_cir_rx";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PN0", "PN1";
+				function = "s_rsb";
+				drive-strength = <20>;
+				bias-pull-up;
+			};
+		};
+
+		r_rsb: rsb@8003400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x08003400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apbs_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts
new file mode 100644
index 000000000000..472ded0aafcf
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lichee Pi Nano";
+	compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
+
+	aliases {
+		mmc0 = &mmc0;
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pe_pins>;
+	status = "okay";
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"MIC", "Mic";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
new file mode 100644
index 000000000000..e4b41bc93852
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
+ */
+
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	clocks {
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0x0>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram-controller@1c00000 {
+			compatible = "allwinner,suniv-f1c100s-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,suniv-f1c100s-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,suniv-f1c100s-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,suniv-f1c100s-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,suniv-f1c100s-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <23>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,suniv-f1c100s-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <24>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,suniv-f1c100s-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <26>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,suniv-f1c100s-usb-phy";
+			reg = <0x01c13400 0x10>;
+			reg-names = "phy_ctrl";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,suniv-f1c100s-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <18>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <2>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,suniv-f1c100s-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,suniv-f1c100s-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,suniv-f1c100s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <38>, <39>, <40>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+			};
+
+			/omit-if-no-ref/
+			i2c0_pd_pins: i2c0-pd-pins {
+				pins = "PD0", "PD12";
+				function = "i2c0";
+			};
+
+			spi0_pc_pins: spi0-pc-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			uart0_pe_pins: uart0-pe-pins {
+				pins = "PE0", "PE1";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pa_pins: uart1-pa-pins {
+				pins = "PA2", "PA3";
+				function = "uart1";
+			};
+		};
+
+		i2c0: i2c@1c27000 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27000 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@1c27400 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27400 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1c27800 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27800 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,suniv-f1c100s-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <13>, <14>, <15>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20ca0 {
+			compatible = "allwinner,suniv-f1c100s-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <16>;
+			clocks = <&osc32k>;
+		};
+
+		pwm: pwm@1c21000 {
+			compatible = "allwinner,suniv-f1c100s-pwm",
+				     "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21000 0x400>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		ir: ir@1c22c00 {
+			compatible = "allwinner,suniv-f1c100s-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c22c00 0x400>;
+			clocks = <&ccu CLK_BUS_IR>, <&ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&ccu RST_BUS_IR>;
+			interrupts = <6>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c23400 {
+			compatible = "allwinner,suniv-f1c100s-lradc",
+				     "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01c23400 0x400>;
+			interrupts = <22>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c25000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c25400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c25800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		codec: codec@1c23c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,suniv-f1c100s-codec";
+			reg = <0x01c23c00 0x400>;
+			interrupts = <21>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 12>,
+			       <&dma SUN4I_DMA_NORMAL 12>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_CODEC>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts b/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts
new file mode 100644
index 000000000000..2d2a3f026df3
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Arm Ltd,
+ * based on work:
+ *   Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lctech Pi F1C200s";
+	compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s",
+		     "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pa_pins>;
+	status = "okay";
+};
+
+/*
+ * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected
+ * to Vin, which supplies the board. Host mode works (if the board is powered
+ * otherwise), but peripheral is probably the intention.
+ */
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts b/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts
new file mode 100644
index 000000000000..184c245041a6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Popcorn Computer PopStick v1.1";
+	compatible = "sourceparts,popstick-v1.1", "sourceparts,popstick",
+		     "allwinner,suniv-f1c200s", "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 4 6 GPIO_ACTIVE_HIGH>; /* PE6 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pe_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi
new file mode 100644
index 000000000000..235994a4a2eb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include "sunxi-bananapi-m2-plus.dtsi"
+
+/ {
+	/*
+	 * Bananapi M2+ v1.2 uses a GPIO line to change the effective
+	 * resistance on the CPU regulator's feedback pin.
+	 */
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1108475>;
+		regulator-max-microvolt = <1308475>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+		gpios-states = <0x1>;
+		states = <1108475 0>, <1308475 1>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi
new file mode 100644
index 000000000000..873817ddb4ea
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "bananapi-m2-plus:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		switch-4 {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <1500000>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+		host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	/* USB host VBUS is on as long as VCC-IO is on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/allwinner/sunxi-common-regulators.dtsi
new file mode 100644
index 000000000000..d8e5826fb3de
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-common-regulators.dtsi
@@ -0,0 +1,111 @@
+/*
+ * sunxi boards common regulator (ahci target power supply, usb-vbus) code
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	reg_ahci_5v: ahci-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "ahci-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 1 8 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 1 9 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_vcc3v0: vcc3v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v0";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi b/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi
new file mode 100644
index 000000000000..a415c4a78a70
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Arm Ltd.
+/*
+ * Common peripherals and configurations for MangoPi MQ-R boards.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */
+		};
+	};
+
+	/* board wide 5V supply directly from the USB-C socket */
+	reg_vcc5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	/* SY8008 DC/DC regulator on the board */
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	/* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
+	reg_vcc_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-core";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	/* XC6206 LDO on the board */
+	reg_avdd2v8: regulator-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_3v3>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+	};
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3v3>;
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_3v3>;
+	vcc-pd-supply = <&reg_3v3>;
+	vcc-pe-supply = <&reg_avdd2v8>;
+	vcc-pf-supply = <&reg_3v3>;
+	vcc-pg-supply = <&reg_3v3>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pb_pins>;
+	status = "okay";
+};
+
+/* The USB-C socket has its CC pins pulled to GND, so is hardwired as a UFP. */
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
new file mode 100644
index 000000000000..be5f5528a118
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis SoMs.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
+		post-power-on-delay-ms = <200>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;   /* PL9 */
+	status = "okay";
+};
+
+
+&de {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>;	/* PL5 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
+		device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"LINEIN", "Line In",
+		"MIC1", "Mic",
+		"MIC2", "Mic",
+		"Mic",  "MBIAS";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi
new file mode 100644
index 000000000000..7df60515a903
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi
@@ -0,0 +1,979 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-h3-ccu.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-h3-ccu.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer0-lcd0-hdmi";
+			clocks = <&display_clocks CLK_MIXER0>,
+				 <&ccu CLK_TCON0>, <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+
+		framebuffer-tve {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer1-lcd1-tve";
+			clocks = <&display_clocks CLK_MIXER1>,
+				 <&ccu CLK_TVE>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext_osc32k";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-h3-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		dma-ranges;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-h3-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-h3-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-h3-tcon-tv",
+				     "allwinner,sun8i-a83t-tcon-tv";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			/* compatible and clocks are in per SoC .dtsi file */
+			reg = <0x01c0f000 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			/* compatible and clocks are in per SoC .dtsi file */
+			reg = <0x01c10000 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			/* compatible and clocks are in per SoC .dtsi file */
+			reg = <0x01c11000 0x1000>;
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		sid: eeprom@1c14000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 4>;
+			};
+		};
+
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun8i-h3-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-h3-musb";
+			reg = <0x01c19000 0x400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun8i-h3-usb-phy";
+			reg = <0x01c19400 0x2c>,
+			      <0x01c1a800 0x4>,
+			      <0x01c1b800 0x4>,
+			      <0x01c1c800 0x4>,
+			      <0x01c1d800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2",
+				    "pmu3";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>,
+				 <&ccu CLK_USB_PHY3>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb3_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>,
+				 <&ccu RST_USB_PHY3>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset",
+				      "usb3_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1b000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1b400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1b400 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@1c1c000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@1c1c400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci3: usb@1c1d000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1d000 0x100>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
+			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci3: usb@1c1d400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1d400 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01c20800 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			csi_pins: csi-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi";
+			};
+
+			emac_rgmii_pins: emac-rgmii-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD7", "PD8", "PD9", "PD10",
+				       "PD12", "PD13", "PD15", "PD16", "PD17";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PA11", "PA12";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PA18", "PA19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PE12", "PE13";
+				function = "i2c2";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC5", "PC6", "PC8",
+				       "PC9", "PC10", "PC11",
+				       "PC12", "PC13", "PC14",
+				       "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PA17";
+				function = "spdif";
+			};
+
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			spi1_pins: spi1-pins {
+				pins = "PA15", "PA16", "PA14", "PA13";
+				function = "spi1";
+			};
+
+			uart0_pa_pins: uart0-pa-pins {
+				pins = "PA4", "PA5";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "PA0", "PA1";
+				function = "uart2";
+			};
+
+			uart2_rts_cts_pins: uart2-rts-cts-pins {
+				pins = "PA2", "PA3";
+				function = "uart2";
+			};
+
+			uart3_pins: uart3-pins {
+				pins = "PA13", "PA14";
+				function = "uart3";
+			};
+
+			uart3_rts_cts_pins: uart3-rts-cts-pins {
+				pins = "PA15", "PA16";
+				function = "uart3";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-a23-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-h3-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+
+			mdio-mux {
+				compatible = "allwinner,sun8i-h3-mdio-mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio-parent-bus = <&mdio>;
+				/* Only one MDIO is usable at the time */
+				internal_mdio: mdio@1 {
+					compatible = "allwinner,sun8i-h3-mdio-internal";
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					int_mii_phy: ethernet-phy@1 {
+						compatible = "ethernet-phy-ieee802.3-c22";
+						reg = <1>;
+						clocks = <&ccu CLK_BUS_EPHY>;
+						resets = <&ccu RST_BUS_EPHY>;
+					};
+				};
+
+				external_mdio: mdio@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		mbus: dram-controller@1c62000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01c62000 0x1000>,
+			      <0x01c63000 0x1000>;
+			reg-names = "mbus", "dram";
+			clocks = <&ccu CLK_MBUS>,
+				 <&ccu CLK_DRAM>,
+				 <&ccu CLK_BUS_DRAM>;
+			clock-names = "mbus", "dram", "bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+			#interconnect-cells = <1>;
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c69000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c69000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>;
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_BUS_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun8i-h3-pwm";
+			reg = <0x01c21400 0x8>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			resets = <&ccu RST_BUS_I2S0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 27>;
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		csi: camera@1cb0000 {
+			compatible = "allwinner,sun8i-h3-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_pins>;
+			status = "disabled";
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-h3-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
+			clock-names = "iahb", "isfr", "tmds", "cec";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint {
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-h3-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_PLL_VIDEO>;
+			clock-names = "bus", "mod", "pll-0";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
+		rtc: rtc@1f00000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01f00000 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out", "iosc";
+			clocks = <&osc32k>;
+			#clock-cells = <1>;
+		};
+
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun8i-h3-r-intc",
+				     "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ccu: clock@1f01400 {
+			compatible = "allwinner,sun8i-h3-r-ccu";
+			reg = <0x01f01400 0x100>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		codec_analog: codec-analog@1f015c0 {
+			compatible = "allwinner,sun8i-h3-codec-analog";
+			reg = <0x01f015c0 0x4>;
+		};
+
+		ir: ir@1f02000 {
+			compatible = "allwinner,sun6i-a31-ir";
+			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_APB0_IR>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x400>;
+			status = "disabled";
+		};
+
+		r_i2c: i2c@1f02400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01f02400 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			clocks = <&r_ccu CLK_APB0_I2C>;
+			resets = <&r_ccu RST_APB0_I2C>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_uart: serial@1f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&r_ccu CLK_APB0_UART>;
+			resets = <&r_ccu RST_APB0_UART>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_uart_pins>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun8i-h3-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_ir_rx_pin: r-ir-rx-pin {
+				pins = "PL11";
+				function = "s_cir_rx";
+			};
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+			};
+
+			r_pwm_pin: r-pwm-pin {
+				pins = "PL10";
+				function = "s_pwm";
+			};
+
+			r_uart_pins: r-uart-pins {
+				pins = "PL2", "PL3";
+				function = "s_uart";
+			};
+		};
+
+		r_pwm: pwm@1f03800 {
+			compatible = "allwinner,sun8i-h3-pwm";
+			reg = <0x01f03800 0x8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_pwm_pin>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/allwinner/sunxi-itead-core-common.dtsi
new file mode 100644
index 000000000000..0d002f83a259
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-itead-core-common.dtsi
@@ -0,0 +1,132 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-cc.dtsi
new file mode 100644
index 000000000000..89731bb34c6b
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-cc.dtsi
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "librecomputer:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		status_led {
+			label = "librecomputer:blue:status";
+			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+			wakeup-source;
+		};
+	};
+
+	reg_vcc1v2: vcc1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* This represents the board's 5V input */
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		enable-active-high;
+	};
+
+	reg_vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc3v3>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+	};
+
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	/* VBUS on USB ports are always on */
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	usb3_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-it.dtsi b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-it.dtsi
new file mode 100644
index 000000000000..50d328c2a84d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-it.dtsi
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_led {
+			label = "librecomputer:blue:status";
+			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* This represents the board's 5V input */
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		enable-active-high;
+	};
+
+	reg_vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-io";
+		/* This is simply a MOSFET switch */
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc3v3>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+	};
+
+	reg_vcc_usbwifi: vcc-usbwifi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-usbwifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&pio 6 4 GPIO_ACTIVE_HIGH>; /* PG4 */
+		enable-active-high;
+	};
+
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_vcc_io>;
+	vcc-pc-supply = <&reg_vcc_io>;
+	vcc-pd-supply = <&reg_vcc_io>;
+	vcc-pe-supply = <&reg_vcc_io>;
+	vcc-pf-supply = <&reg_vcc_io>;
+	vcc-pg-supply = <&reg_vcc_io>;
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc_usbwifi>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sunxi-reference-design-tablet.dtsi
new file mode 100644
index 000000000000..117198c52e1f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-reference-design-tablet.dtsi
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "sunxi-common-regulators.dtsi"
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/alphascale/Makefile b/arch/arm/boot/dts/alphascale/Makefile
new file mode 100644
index 000000000000..8d1314fc79d0
--- /dev/null
+++ b/arch/arm/boot/dts/alphascale/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_ASM9260) += \
+	alphascale-asm9260-devkit.dtb
+dtb-$(CONFIG_MACH_ASM9260) += \
+	alphascale-asm9260-devkit.dtb
diff --git a/arch/arm/boot/dts/alphascale/alphascale-asm9260-devkit.dts b/arch/arm/boot/dts/alphascale/alphascale-asm9260-devkit.dts
new file mode 100644
index 000000000000..c77e2c902fb6
--- /dev/null
+++ b/arch/arm/boot/dts/alphascale/alphascale-asm9260-devkit.dts
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+/dts-v1/;
+#include "alphascale-asm9260.dtsi"
+
+/ {
+	model = "Alphascale asm9260 Development Kit";
+	compatible = "alphascale,asm9260devkit", "alphascale,asm9260";
+};
diff --git a/arch/arm/boot/dts/alphascale/alphascale-asm9260.dtsi b/arch/arm/boot/dts/alphascale/alphascale-asm9260.dtsi
new file mode 100644
index 000000000000..2ce6038536fd
--- /dev/null
+++ b/arch/arm/boot/dts/alphascale/alphascale-asm9260.dtsi
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&icoll>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x20000000 0x2000000>;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			clocks = <&acc CLKID_SYS_CPU>;
+		};
+	};
+
+	osc24m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-accuracy = <30000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		acc: clock-controller@80040000 {
+			compatible = "alphascale,asm9260-clock-controller";
+			#clock-cells = <1>;
+			clocks = <&osc24m>;
+			reg = <0x80040000 0x204>;
+		};
+
+		icoll: interrupt-controller@80054000 {
+			compatible = "alphascale,asm9260-icoll";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x80054000 0x200>;
+		};
+
+		timer0: timer@80088000 {
+			compatible = "alphascale,asm9260-timer";
+			reg = <0x80088000 0x4000>;
+			clocks = <&acc CLKID_AHB_TIMER0>;
+			interrupts = <29>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
deleted file mode 100644
index 72a9b3fc4251..000000000000
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION
- *
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "am335x-igep0033.dtsi"
-
-/ {
-	model = "IGEP COM AM335x on AQUILA Expansion";
-	compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
-
-	hdmi {
-		compatible = "ti,tilcdc,slave";
-		i2c = <&i2c0>;
-		pinctrl-names = "default", "off";
-		pinctrl-0 = <&nxp_hdmi_pins>;
-		pinctrl-1 = <&nxp_hdmi_off_pins>;
-		status = "okay";
-	};
-
-	leds_base {
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_base_pins>;
-
-		compatible = "gpio-leds";
-
-		led@0 {
-			label = "base:red:user";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;	/* gpio1_21 */
-			default-state = "off";
-		};
-
-		led@1 {
-			label = "base:green:user";
-			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;	/* gpio2_0 */
-			default-state = "off";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
-		pinctrl-single,pins = <
-			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en */
-		>;
-	};
-	nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
-		pinctrl-single,pins = <
-			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
-		>;
-	};
-
-	leds_base_pins: pinmux_leds_base_pins {
-		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
-		>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-};
-
-&i2c0 {
-	eeprom: eeprom@50 {
-		compatible = "at,24c256";
-		reg = <0x50>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
deleted file mode 100644
index 6cc25ed912ee..000000000000
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led@2 {
-			label = "beaglebone:green:heartbeat";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "beaglebone:green:mmc0";
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@4 {
-			label = "beaglebone:green:usr2";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		led@5 {
-			label = "beaglebone:green:usr3";
-			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc1";
-			default-state = "off";
-		};
-	};
-
-	vmmcsd_fixed: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&clkout2_pin>;
-
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
-		>;
-	};
-
-	emmc_pins: pinmux_emmc_pins {
-		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-name = "vdds_dpr";
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-name = "vio,vrtc,vdds";
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-name = "vdd_3v3aux";
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-name = "vdd_1v8";
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-name = "vdd_3v3a";
-			regulator-always-on;
-		};
-	};
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "mii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "mii";
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&mmc1 {
-	status = "okay";
-	bus-width = <0x4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
-};
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
deleted file mode 100644
index 83d40f7655e5..000000000000
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-
-/ {
-	model = "TI AM335x BeagleBone";
-	compatible = "ti,am335x-bone", "ti,am33xx";
-};
-
-&ldo3_reg {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-always-on;
-};
-
-&mmc1 {
-	vmmc-supply = <&ldo3_reg>;
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
deleted file mode 100644
index 901739fcb85a..000000000000
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-
-/ {
-	model = "TI AM335x BeagleBone Black";
-	compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
-};
-
-&ldo3_reg {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmcsd_fixed>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vmmcsd_fixed>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&am33xx_pinmux {
-	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
-		pinctrl-single,pins = <
-			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
-			0xa0 0x08       /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xa4 0x08       /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xa8 0x08       /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xac 0x08       /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb0 0x08       /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb4 0x08       /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb8 0x08       /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xbc 0x08       /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc0 0x08       /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc4 0x08       /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc8 0x08       /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xcc 0x08       /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd0 0x08       /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd4 0x08       /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd8 0x08       /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xdc 0x08       /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xe0 0x00       /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xe4 0x00       /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xe8 0x00       /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xec 0x00       /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-		>;
-	};
-	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
-		pinctrl-single,pins = <
-			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
-		>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-};
-
-/ {
-	hdmi {
-		compatible = "ti,tilcdc,slave";
-		i2c = <&i2c0>;
-		pinctrl-names = "default", "off";
-		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
-		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
deleted file mode 100644
index e2156a583de7..000000000000
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ /dev/null
@@ -1,666 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	model = "TI AM335x EVM";
-	compatible = "ti,am335x-evm", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	lis3_reg: fixedregulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "lis3_reg";
-		regulator-boot-on;
-	};
-
-	matrix_keypad: matrix_keypad@0 {
-		compatible = "gpio-matrix-keypad";
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <2>;
-
-		row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH		/* Bank1, pin25 */
-			     &gpio1 26 GPIO_ACTIVE_HIGH		/* Bank1, pin26 */
-			     &gpio1 27 GPIO_ACTIVE_HIGH>;	/* Bank1, pin27 */
-
-		col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH		/* Bank1, pin21 */
-			     &gpio1 22 GPIO_ACTIVE_HIGH>;	/* Bank1, pin22 */
-
-		linux,keymap = <0x0000008b	/* MENU */
-				0x0100009e	/* BACK */
-				0x02000069	/* LEFT */
-				0x0001006a	/* RIGHT */
-				0x0101001c	/* ENTER */
-				0x0201006c>;	/* DOWN */
-	};
-
-	gpio_keys: volume_keys@0 {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		switch@9 {
-			label = "volume-up";
-			linux,code = <115>;
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
-		};
-
-		switch@10 {
-			label = "volume-down";
-			linux,code = <114>;
-			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 0>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	panel {
-		compatible = "ti,tilcdc,panel";
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins_s0>;
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
-
-		display-timings {
-			800x480p62 {
-				clock-frequency = <30000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <39>;
-				hback-porch = <39>;
-				hsync-len = <47>;
-				vback-porch = <29>;
-				vfront-porch = <13>;
-				vsync-len = <2>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-EVM";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <12000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT",
-			"LINE1L",               "Line In",
-			"LINE1R",               "Line In";
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
-
-	matrix_keypad_s0: matrix_keypad_s0 {
-		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
-		>;
-	};
-
-	volume_keys_s0: volume_keys_s0 {
-		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
-			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
-			0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	nandflash_pins_s0: nandflash_pins_s0 {
-		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-
-	ecap0_pins: backlight_pins {
-		pinctrl-single,pins = <
-			0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	lcd_pins_s0: lcd_pins_s0 {
-		pinctrl-single,pins = <
-			0x20 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)		/* lcd_ac_bias_en.lcd_ac_bias_en */
-		>;
-	};
-
-	am335x_evm_audio_pins: am335x_evm_audio_pins {
-		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	status = "okay";
-	clock-frequency = <100000>;
-
-	lis331dlh: lis331dlh@18 {
-		compatible = "st,lis331dlh", "st,lis3lv02d";
-		reg = <0x18>;
-		Vdd-supply = <&lis3_reg>;
-		Vdd_IO-supply = <&lis3_reg>;
-
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-		st,click-thresh-x = <10>;
-		st,click-thresh-y = <10>;
-		st,click-thresh-z = <10>;
-		st,irq1-click;
-		st,irq2-click;
-		st,wakeup-x-lo;
-		st,wakeup-x-hi;
-		st,wakeup-y-lo;
-		st,wakeup-y-hi;
-		st,wakeup-z-lo;
-		st,wakeup-z-hi;
-		st,min-limit-x = <120>;
-		st,min-limit-y = <120>;
-		st,min-limit-z = <140>;
-		st,max-limit-x = <550>;
-		st,max-limit-y = <550>;
-		st,max-limit-z = <750>;
-	};
-
-	tsl2550: tsl2550@39 {
-		compatible = "taos,tsl2550";
-		reg = <0x39>;
-	};
-
-	tmp275: tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tlv320aic3106: tlv320aic3106@1b {
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
-		IOVDD-supply = <&vaux2_reg>;
-		DRVDD-supply = <&vaux2_reg>;
-		DVDD-supply = <&vbat>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-};
-
-&elm {
-	status = "okay";
-};
-
-&epwmss0 {
-	status = "okay";
-
-	ecap0: ecap@48300100 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap0_pins>;
-	};
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins_s0>;
-	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-	nand@0,0 {
-		reg = <0 0 0>; /* CS0, offset 0 */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00020000 0x00020000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00040000 0x00020000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x00060000 0x00020000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x000C0000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x001C0000 0x00020000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x001E0000 0x00020000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00200000 0x00800000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00A00000 0x0F600000>;
-		};
-	};
-};
-
-#include "tps65910.dtsi"
-
-&mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&am335x_evm_audio_pins>;
-
-		status = "okay";
-
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 4 serializers */
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 2
-		>;
-		tx-num-evt = <32>;
-		rx-num-evt = <32>;
-};
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii-txid";
-};
-
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-	};
-
-	adc {
-		ti,adc-channels = <4 5 6 7>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
deleted file mode 100644
index df5fee6b6b4b..000000000000
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ /dev/null
@@ -1,680 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * AM335x Starter Kit
- * http://www.ti.com/tool/tmdssk3358
- */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "TI AM335x EVM-SK";
-	compatible = "ti,am335x-evmsk", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	lis3_reg: fixedregulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "lis3_reg";
-		regulator-boot-on;
-	};
-
-	wl12xx_vmmc: fixedregulator@2 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 29 0>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	vtt_fixed: fixedregulator@3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vtt";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led@1 {
-			label = "evmsk:green:usr0";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led@2 {
-			label = "evmsk:green:usr1";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "evmsk:green:mmc0";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@4 {
-			label = "evmsk:green:heartbeat";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	gpio_buttons: gpio_buttons@0 {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch@1 {
-			label = "button0";
-			linux,code = <0x100>;
-			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		switch@2 {
-			label = "button1";
-			linux,code = <0x101>;
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		switch@3 {
-			label = "button2";
-			linux,code = <0x102>;
-			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
-		};
-
-		switch@4 {
-			label = "button3";
-			linux,code = <0x103>;
-			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 58 61 66 75 90 125 170 255>;
-		default-brightness-level = <8>;
-	};
-
-	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-EVMSK";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT";
-	};
-
-	panel {
-		compatible = "ti,tilcdc,panel";
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&lcd_pins_default>;
-		pinctrl-1 = <&lcd_pins_sleep>;
-		status = "okay";
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
-		display-timings {
-			480x272 {
-				hactive         = <480>;
-				vactive         = <272>;
-				hback-porch     = <43>;
-				hfront-porch    = <8>;
-				hsync-len       = <4>;
-				vback-porch     = <12>;
-				vfront-porch    = <4>;
-				vsync-len       = <10>;
-				clock-frequency = <9000000>;
-				hsync-active    = <0>;
-				vsync-active    = <0>;
-			};
-		};
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
-
-	lcd_pins_default: lcd_pins_default {
-		pinctrl-single,pins = <
-			0x20 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
-		>;
-	};
-
-	lcd_pins_sleep: lcd_pins_sleep {
-		pinctrl-single,pins = <
-			0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad15.lcd_data16 */
-			0xa0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data0.lcd_data0 */
-			0xa4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data1.lcd_data1 */
-			0xa8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data2.lcd_data2 */
-			0xac (PULL_DISABLE | MUX_MODE7)	/* lcd_data3.lcd_data3 */
-			0xb0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data4.lcd_data4 */
-			0xb4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data5.lcd_data5 */
-			0xb8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data6.lcd_data6 */
-			0xbc (PULL_DISABLE | MUX_MODE7)	/* lcd_data7.lcd_data7 */
-			0xc0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data8.lcd_data8 */
-			0xc4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data9.lcd_data9 */
-			0xc8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data10.lcd_data10 */
-			0xcc (PULL_DISABLE | MUX_MODE7)	/* lcd_data11.lcd_data11 */
-			0xd0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data12.lcd_data12 */
-			0xd4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data13.lcd_data13 */
-			0xd8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data14.lcd_data14 */
-			0xdc (PULL_DISABLE | MUX_MODE7)	/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_ac_bias_en.lcd_ac_bias_en */
-		>;
-	};
-
-
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
-			0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
-			0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
-			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
-		>;
-	};
-
-	gpio_keys_s0: gpio_keys_s0 {
-		pinctrl-single,pins = <
-			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
-			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
-			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)		/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	ecap2_pins: backlight_pins {
-		pinctrl-single,pins = <
-			0x19c 0x4	/* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-
-			/* Slave 2 */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-
-			/* Slave 2 reset value*/
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	mcasp1_pins: mcasp1_pins {
-		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-		>;
-	};
-
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-
-	lis331dlh: lis331dlh@18 {
-		compatible = "st,lis331dlh", "st,lis3lv02d";
-		reg = <0x18>;
-		Vdd-supply = <&lis3_reg>;
-		Vdd_IO-supply = <&lis3_reg>;
-
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-		st,click-thresh-x = <10>;
-		st,click-thresh-y = <10>;
-		st,click-thresh-z = <10>;
-		st,irq1-click;
-		st,irq2-click;
-		st,wakeup-x-lo;
-		st,wakeup-x-hi;
-		st,wakeup-y-lo;
-		st,wakeup-y-hi;
-		st,wakeup-z-lo;
-		st,wakeup-z-hi;
-		st,min-limit-x = <120>;
-		st,min-limit-y = <120>;
-		st,min-limit-z = <140>;
-		st,max-limit-x = <550>;
-		st,max-limit-y = <550>;
-		st,max-limit-z = <750>;
-	};
-
-	tlv320aic3106: tlv320aic3106@1b {
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
-		IOVDD-supply = <&vaux2_reg>;
-		DRVDD-supply = <&vaux2_reg>;
-		DVDD-supply = <&vbat>;
-	};
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&epwmss2 {
-	status = "okay";
-
-	ecap2: ecap@48304100 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap2_pins>;
-	};
-};
-
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <2>;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&gpio0 {
-	ti,no-reset-on-init;
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&wl12xx_vmmc>;
-	ti,non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-};
-
-&mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&mcasp1_pins>;
-
-		status = "okay";
-
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 4 serializers */
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 2
-		>;
-		tx-num-evt = <32>;
-		rx-num-evt = <32>;
-};
-
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-	};
-};
-
-&lcdc {
-      status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
deleted file mode 100644
index a1a0cc5eb35c..000000000000
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
- *
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-
-		compatible = "gpio-leds";
-
-		led@0 {
-			label = "com:green:user";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	vmmc: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&am33xx_pinmux {
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	nandflash_pins: pinmux_nandflash_pins {
-		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	leds_pins: pinmux_leds_pins {
-		pinctrl-single,pins = <
-			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-		>;
-	};
-};
-
-&mac {
-	status = "okay";
-};
-
-&davinci_mdio {
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rmii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rmii";
-};
-
-&phy_sel {
-	rmii-clock-ext;
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins>;
-
-	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-
-	nand@0,0 {
-		reg = <0 0 0>; /* CS0, offset 0 */
-		nand-bus-width = <8>;
-		ti,nand-ecc-opt = "bch8";
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		elm_id = <&elm>;
-
-		/* MTD partition table */
-		partition@0 {
-			label = "SPL";
-			reg = <0x00000000 0x000080000>;
-		};
-
-		partition@1 {
-			label = "U-boot";
-			reg = <0x00080000 0x001e0000>;
-		};
-
-		partition@2 {
-			label = "U-Boot Env";
-			reg = <0x00260000 0x00020000>;
-		};
-
-		partition@3 {
-			label = "Kernel";
-			reg = <0x00280000 0x00500000>;
-		};
-
-		partition@4 {
-			label = "File System";
-			reg = <0x00780000 0x007880000>;
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc>;
-	bus-width = <4>;
-};
-
-&uart0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-always-on;
-		};
-	};
-};
-
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
deleted file mode 100644
index a3466455b171..000000000000
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	model = "Newflow AM335x NanoBone";
-	compatible = "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led@0 {
-			label = "nanobone:green:usr1";
-			gpios = <&gpio1 5 0>;
-			default-state = "off";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&misc_pins>;
-
-	misc_pins: misc_pins {
-		pinctrl-single,pins = <
-			0x15c (PIN_OUTPUT | MUX_MODE7)	/* spi0_cs0.gpio0_5 */
-		>;
-	};
-
-	gpmc_pins: gpmc_pins {
-		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x20 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad8.gpmc_ad8 */
-			0x24 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad9.gpmc_ad9 */
-			0x28 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad10.gpmc_ad10 */
-			0x2c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad11.gpmc_ad11 */
-			0x30 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad12.gpmc_ad12 */
-			0x34 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad13.gpmc_ad13 */
-			0x38 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad14.gpmc_ad14 */
-			0x3c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad15.gpmc_ad15 */
-
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			0x80 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn1.gpmc_csn1 */
-			0x84 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn2.gpmc_csn2 */
-			0x88 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn3.gpmc_csn3 */
-
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ben0_cle.gpmc_ben0_cle */
-
-			0xa4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data1.gpmc_a1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data2.gpmc_a2 */
-			0xac (PIN_OUTPUT | MUX_MODE1)		/* lcd_data3.gpmc_a3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data4.gpmc_a4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data5.gpmc_a5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data6.gpmc_a6 */
-			0xbc (PIN_OUTPUT | MUX_MODE1)		/* lcd_data7.gpmc_a7 */
-
-			0xe0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
-			0xe4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
-			0xe8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
-		>;
-	};
-
-	i2c0_pins: i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	uart0_pins: uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT | MUX_MODE0)		/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	uart1_pins: uart1_pins {
-		pinctrl-single,pins = <
-			0x178 (PIN_OUTPUT | MUX_MODE7)		/* uart1_ctsn.uart1_ctsn */
-			0x17c (PIN_OUTPUT | MUX_MODE7)		/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT | MUX_MODE0)		/* uart1_txd.uart1_txd */
-		>;
-	};
-
-	uart2_pins: uart2_pins {
-		pinctrl-single,pins = <
-			0xc0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* lcd_data8.gpio2[14] */
-			0xc4 (PIN_OUTPUT | MUX_MODE7)		/* lcd_data9.gpio2[15] */
-			0x150 (PIN_INPUT | MUX_MODE1)		/* spi0_sclk.uart2_rxd */
-			0x154 (PIN_OUTPUT | MUX_MODE1)		/* spi0_d0.uart2_txd */
-		>;
-	};
-
-	uart3_pins: uart3_pins {
-		pinctrl-single,pins = <
-			0xc8 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data10.uart3_ctsn */
-			0xcc (PIN_OUTPUT | MUX_MODE6)		/* lcd_data11.uart3_rtsn */
-			0x160 (PIN_INPUT | MUX_MODE1)		/* spi0_cs1.uart3_rxd */
-			0x164 (PIN_OUTPUT | MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
-		>;
-	};
-
-	uart4_pins: uart4_pins {
-		pinctrl-single,pins = <
-			0xd0 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data12.uart4_ctsn */
-			0xd4 (PIN_OUTPUT | MUX_MODE6)		/* lcd_data13.uart4_rtsn */
-			0x168 (PIN_INPUT | MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
-			0x16c (PIN_OUTPUT | MUX_MODE1)		/* uart0_rtsn.uart4_txd */
-		>;
-	};
-
-	uart5_pins: uart5_pins {
-		pinctrl-single,pins = <
-			0xd8 (PIN_INPUT | MUX_MODE4)		/* lcd_data14.uart5_rxd */
-			0x144 (PIN_OUTPUT | MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
-		>;
-	};
-
-	mmc1_pins: mmc1_pins {
-		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7)	/* emu1.gpio3[8] */
-			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	status = "okay";
-	rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-	rs485-rts-active-high;
-	rs485-rx-during-tx;
-	rs485-rts-delay = <1 1>;
-	linux,rs485-enabled-at-boot-time;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-	rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
-	rs485-rts-active-high;
-	rs485-rts-delay = <1 1>;
-	linux,rs485-enabled-at-boot-time;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart5_pins>;
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	gpio@20 {
-		compatible = "mcp,mcp23017";
-		reg = <0x20>;
-	};
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-	eeprom@53 {
-		compatible = "mcp,24c02";
-		reg = <0x53>;
-		pagesize = <8>;
-	};
-
-	rtc@68 {
-		compatible = "dallas,ds1307";
-		reg = <0x68>;
-	};
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	compatible = "ti,am3352-gpmc";
-	ti,hwmods = "gpmc";
-	status = "okay";
-	gpmc,num-waitpins = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmc_pins>;
-
-	#address-cells = <2>;
-	#size-cells = <1>;
-	ranges = <0 0 0x08000000 0x08000000>;	/* CS0: NOR 128M */
-
-	nor@0,0 {
-		reg = <0 0x00000000 0x08000000>;
-		compatible = "cfi-flash";
-		linux,mtd-name = "spansion,s29gl010p11t";
-		bank-width = <2>;
-
-		gpmc,mux-add-data = <2>;
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <160>;
-		gpmc,cs-wr-off-ns = <160>;
-		gpmc,adv-on-ns = <10>;
-		gpmc,adv-rd-off-ns = <30>;
-		gpmc,adv-wr-off-ns = <30>;
-		gpmc,oe-on-ns = <40>;
-		gpmc,oe-off-ns = <160>;
-		gpmc,we-on-ns = <40>;
-		gpmc,we-off-ns = <160>;
-		gpmc,rd-cycle-ns = <160>;
-		gpmc,wr-cycle-ns = <160>;
-		gpmc,access-ns = <150>;
-		gpmc,page-burst-access-ns = <10>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-delay-ns = <20>;
-		gpmc,wr-data-mux-bus-ns = <70>;
-		gpmc,wr-access-ns = <80>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/*
-		MTD partition table
-		===================
-		+------------+-->0x00000000-> U-Boot start
-		|            |
-		|            |-->0x000BFFFF-> U-Boot end
-		|            |-->0x000C0000-> ENV1 start
-		|            |
-		|            |-->0x000DFFFF-> ENV1 end
-		|            |-->0x000E0000-> ENV2 start
-		|            |
-		|            |-->0x000FFFFF-> ENV2 end
-		|            |-->0x00100000-> Kernel start
-		|            |
-		|            |-->0x004FFFFF-> Kernel end
-		|            |-->0x00500000-> File system start
-		|            |
-		|            |-->0x014FFFFF-> File system end
-		|            |-->0x01500000-> User data start
-		|            |
-		|            |-->0x03FFFFFF-> User data end
-		|            |-->0x04000000-> Data storage start
-		|            |
-		+------------+-->0x08000000-> NOR end (Free end)
-		*/
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x000c0000>; /* 768KB */
-		};
-
-		partition@1 {
-			label = "env1";
-			reg = <0x000c0000 0x00020000>; /* 128KB */
-		};
-
-		partition@2 {
-			label = "env2";
-			reg = <0x000e0000 0x00020000>; /* 128KB */
-		};
-
-		partition@3 {
-			label = "kernel";
-			reg = <0x00100000 0x00400000>; /* 4MB */
-		};
-
-		partition@4 {
-			label = "rootfs";
-			reg = <0x00500000 0x01000000>; /* 16MB */
-		};
-
-		partition@5 {
-			label = "user";
-			reg = <0x01500000 0x02b00000>; /* 43MB */
-		};
-
-		partition@6 {
-			label = "data";
-			reg = <0x04000000 0x04000000>; /* 64MB */
-		};
-	};
-};
-
-&mac {
-	dual_emac = <1>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	dual_emac_res_vlan = <2>;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&ldo4_reg>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	bus-width = <4>;
-	cd-gpios = <&gpio3 8 0>;
-	wp-gpios = <&gpio3 18 0>;
-};
-
-#include "tps65217.dtsi"
-
-&tps {
-	regulators {
-		dcdc1_reg: regulator@0 {
-			/* +1.5V voltage with ±4% tolerance */
-			regulator-min-microvolt = <1450000>;
-			regulator-max-microvolt = <1550000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <915000>;
-			regulator-max-microvolt = <1140000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <915000>;
-			regulator-max-microvolt = <1140000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			/* +1.8V voltage with ±4% tolerance */
-			regulator-min-microvolt = <1750000>;
-			regulator-max-microvolt = <1870000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			/* +3.3V voltage with ±4% tolerance */
-			regulator-min-microvolt = <3175000>;
-			regulator-max-microvolt = <3430000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			/* +1.8V voltage with ±4% tolerance */
-			regulator-min-microvolt = <1750000>;
-			regulator-max-microvolt = <1870000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			/* +3.3V voltage with ±4% tolerance */
-			regulator-min-microvolt = <3175000>;
-			regulator-max-microvolt = <3430000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
deleted file mode 100644
index 0d35ab64641c..000000000000
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ /dev/null
@@ -1,653 +0,0 @@
-/*
- * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "am33xx.dtsi"
-
-/ {
-	model = "Gumstix Pepper";
-	compatible = "gumstix,am335x-pepper", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc3_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	buttons: user_buttons {
-		compatible = "gpio-keys";
-	};
-
-	leds: user_leds {
-		compatible = "gpio-leds";
-	};
-
-	panel: lcd_panel {
-		compatible = "ti,tilcdc,panel";
-	};
-
-	sound: sound_iface {
-		compatible = "ti,da830-evm-audio";
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-	};
-
-	v3v3c_reg: fixedregulator@1 {
-		compatible = "regulator-fixed";
-	};
-
-	vdd5_reg: fixedregulator@2 {
-		compatible = "regulator-fixed";
-	};
-};
-
-/* I2C Busses */
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "at,24c256";
-		reg = <0x50>;
-	};
-
-	audio_codec: tlv320aic3106@1b {
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-	};
-
-	accel: lis331dlh@1d {
-		compatible = "st,lis3lv02d";
-		reg = <0x1d>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <400000>;
-};
-
-&am33xx_pinmux {
-	i2c0_pins: pinmux_i2c0 {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-	i2c1_pins: pinmux_i2c1 {
-		pinctrl-single,pins = <
-			0x10C (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_crs,i2c1_sda */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
-		>;
-	};
-};
-
-/* Accelerometer */
-&accel {
-	pinctrl-names = "default";
-	pinctrl-0 = <&accel_pins>;
-
-	Vdd-supply = <&ldo3_reg>;
-	Vdd_IO-supply = <&ldo3_reg>;
-	st,irq1-click;
-	st,wakeup-x-lo;
-	st,wakeup-x-hi;
-	st,wakeup-y-lo;
-	st,wakeup-y-hi;
-	st,wakeup-z-lo;
-	st,wakeup-z-hi;
-	st,min-limit-x = <92>;
-	st,max-limit-x = <14>;
-	st,min-limit-y = <14>;
-	st,max-limit-y = <92>;
-	st,min-limit-z = <92>;
-	st,max-limit-z = <14>;
-};
-
-&am33xx_pinmux {
-	accel_pins: pinmux_accel {
-		pinctrl-single,pins = <
-			0x98 (PIN_INPUT | MUX_MODE7)   /* gpmc_wen.gpio2_4 */
-		>;
-	};
-};
-
-/* Audio */
-&audio_codec {
-	status = "okay";
-
-	gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>;
-	AVDD-supply = <&ldo3_reg>;
-	IOVDD-supply = <&ldo3_reg>;
-	DRVDD-supply = <&ldo3_reg>;
-	DVDD-supply = <&dcdc1_reg>;
-};
-
-&sound {
-	ti,model = "AM335x-EVM";
-	ti,audio-codec = <&audio_codec>;
-	ti,mcasp-controller = <&mcasp0>;
-	ti,codec-clock-rate = <12000000>;
-	ti,audio-routing =
-		"Headphone Jack",	"HPLOUT",
-		"Headphone Jack",	"HPROUT",
-		"LINE1L",		"Line In";
-};
-
-&mcasp0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&audio_pins>;
-
-	op-mode = <0>;	/* MCASP_ISS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <
-		1 2 0 0
-		0 0 0 0
-		0 0 0 0
-		0 0 0 0
-	>;
-	tx-num-evt = <1>;
-	rx-num-evt = <1>;
-};
-
-&am33xx_pinmux {
-	audio_pins: pinmux_audio {
-		pinctrl-single,pins = <
-			0x1AC (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
-			0x194 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
-			0x190 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
-			0x198 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
-			0x1A8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr1.mcasp0_axr1 */
-			0x40 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
-		>;
-	};
-};
-
-/* Display: 24-bit LCD Screen */
-&panel {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcd_pins>;
-	panel-info {
-		ac-bias = <255>;
-		ac-bias-intrpt = <0>;
-		dma-burst-sz = <16>;
-		bpp = <32>;
-		fdd = <0x80>;
-		sync-edge = <0>;
-		sync-ctrl = <1>;
-		raster-order = <0>;
-		fifo-th = <0>;
-	};
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: 480x272 {
-			clock-frequency = <18400000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <8>;
-			hback-porch = <4>;
-			hsync-len = <41>;
-			vfront-porch = <4>;
-			vback-porch = <2>;
-			vsync-len = <10>;
-			hsync-active = <1>;
-			vsync-active = <1>;
-		};
-	};
-};
-
-&lcdc {
-	status = "okay";
-};
-
-&am33xx_pinmux {
-	lcd_pins: pinmux_lcd {
-		pinctrl-single,pins = <
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
-			0x20 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data16 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data17 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data18 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data19 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data20 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data21 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data22 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data23 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
-			/* Display Enable */
-			0x6c (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
-		>;
-	};
-};
-
-/* Ethernet */
-&cpsw_emac0 {
-	status = "okay";
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii";
-};
-
-&cpsw_emac1 {
-	status = "okay";
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii";
-};
-
-&davinci_mdio {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-};
-
-&mac {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ethernet_pins>;
-};
-
-
-&am33xx_pinmux {
-	ethernet_pins: pinmux_ethernet {
-		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd3.rgmii1_rxd3 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd2.rgmii1_rxd2 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
-			/* ethernet interrupt */
-			0x144 (PIN_INPUT_PULLUP | MUX_MODE7)	/* rmii2_refclk.gpio0_29 */
-			/* ethernet PHY nReset */
-			0x108 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* mii1_col.gpio3_0 */
-		>;
-	};
-
-	mdio_pins: pinmux_mdio {
-		pinctrl-single,pins = <
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-};
-
-/* MMC */
-&mmc1 {
-	/* Bootable SD card slot */
-	status = "okay";
-	vmmc-supply = <&ldo3_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&mmc2 {
-	/* eMMC (not populated) on MMC #2 */
-	status = "disabled";
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	vmmc-supply = <&ldo3_reg>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&edma {
-	/* Map eDMA MMC2 Events from Crossbar */
-	ti,edma-xbar-event-map = /bits/ 16 <1 12
-                                            2 13>;
-};
-
-
-&mmc3 {
-	/* Wifi & Bluetooth on MMC #3 */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&wireless_pins>;
-	vmmmc-supply = <&v3v3c_reg>;
-	bus-width = <4>;
-	ti,non-removable;
-	dmas = <&edma 12
-		&edma 13>;
-	dma-names = "tx", "rx";
-};
-
-
-&am33xx_pinmux {
-	sd_pins: pinmux_sd_card {
-		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT | MUX_MODE7)		/* spi0_cs1.gpio0_6 */
-		>;
-	};
-	emmc_pins: pinmux_emmc {
-		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
-			/* EMMC nReset */
-			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
-		>;
-	};
-	wireless_pins: pinmux_wireless {
-		pinctrl-single,pins = <
-			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
-			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
-			0x4c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2 */
-			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3 */
-			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc1_clk */
-			/* WLAN nReset */
-			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-			/* WLAN nPower down */
-			0x70 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-			/* 32kHz Clock */
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-};
-
-/* Power */
-&vbat {
-	regulator-name = "vbat";
-	regulator-min-microvolt = <5000000>;
-	regulator-max-microvolt = <5000000>;
-};
-
-&v3v3c_reg {
-	regulator-name = "v3v3c_reg";
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	vin-supply = <&vbat>;
-};
-
-&vdd5_reg {
-	regulator-name = "vdd5_reg";
-	regulator-min-microvolt = <5000000>;
-	regulator-max-microvolt = <5000000>;
-	vin-supply = <&vbat>;
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	backlight {
-		isel = <1>; /* ISET1 */
-		fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
-		default-brightness = <80>;
-	};
-
-	regulators {
-		dcdc1_reg: regulator@0 {
-			/* VDD_1V8 system supply */
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
-			regulator-boot-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			/* VRTC 1.8V always-on supply */
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			/* 3.3V rail */
-		};
-
-		ldo3_reg: regulator@5 {
-			/* VDD_3V3A 3.3V rail */
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		ldo4_reg: regulator@6 {
-			/* VDD_3V3B 3.3V rail */
-		};
-	};
-};
-
-/* SPI Busses */
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-};
-
-&am33xx_pinmux {
-	spi0_pins: pinmux_spi0 {
-		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
-			0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
-			0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
-		>;
-	};
-};
-
-/* Touch Screen */
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-	};
-
-	adc {
-		ti,adc-channels = <4 5 6 7>;
-	};
-};
-
-/* UARTs */
-&uart0 {
-	/* Serial Console */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
-
-&uart1 {
-	/* Broken out to J6 header */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-	uart1_pins: pinmux_uart1 {
-		pinctrl-single,pins = <
-			0x178 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */
-			0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
-		>;
-	};
-};
-
-/* USB */
-&usb {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb_pins>;
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-        dr_mode = "host";
-};
-
-&usb1 {
-	status = "okay";
-        dr_mode = "host";
-};
-
-&cppi41dma {
-	status = "okay";
-};
-
-&am33xx_pinmux {
-	usb_pins: pinmux_usb {
-		pinctrl-single,pins = <
-			/* USB0 Over-Current (active low) */
-			0x64 (PIN_INPUT | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-			/* USB1 Over-Current (active low) */
-			0x68 (PIN_INPUT | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-		>;
-	};
-};
-
-/* User IO */
-&leds {
-	pinctrl-names = "default";
-	pinctrl-0 = <&user_leds_pins>;
-
-	led@0 {
-		label = "pepper:user0:blue";
-		gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
-		linux,default-trigger = "none";
-		default-state = "off";
-	};
-
-	led@1 {
-		label = "pepper:user1:red";
-		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-		linux,default-trigger = "none";
-		default-state = "off";
-	};
-};
-
-&buttons {
-	pinctrl-names = "default";
-	pinctrl-0 = <&user_buttons_pins>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	button@0 {
-		label = "home";
-		linux,code = <KEY_HOME>;
-		gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
-	};
-
-	button@1 {
-		label = "menu";
-		linux,code = <KEY_MENU>;
-		gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
-	};
-
-	buttons@2 {
-		label = "power";
-		linux,code = <KEY_POWER>;
-		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
-	};
-};
-
-&am33xx_pinmux {
-	user_leds_pins: pinmux_user_leds {
-		pinctrl-single,pins = <
-			0x50 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
-			0x54 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-		>;
-	};
-
-	user_buttons_pins: pinmux_user_buttons {
-		pinctrl-single,pins = <
-			0x58 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x5C (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a7.gpio1_21 */
-			0x164 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio0_7 */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
deleted file mode 100644
index 712edce7d6fb..000000000000
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ /dev/null
@@ -1,646 +0,0 @@
-/*
- * Device Tree Source for AM33xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&scrm_clocks {
-	sys_clkin_ck: sys_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0040>;
-	};
-
-	adc_tsc_fck: adc_tsc_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan0_fck: dcan0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan1_fck: dcan1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp0_fck: mcasp0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp1_fck: mcasp1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex0_fck: smartreflex0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex1_fck: smartreflex1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sha0_fck: sha0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	aes0_fck: aes0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	rng_fck: rng_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0664>;
-	};
-};
-&prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	clk_rc32k_ck: clk_rc32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_24000000_ck: virt_24000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	virt_25000000_ck: virt_25000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	tclkin_ck: tclkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	dpll_core_ck: dpll_core_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-core-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0490>, <0x045c>, <0x0468>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_m4_ck: dpll_core_m4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0480>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m5_ck: dpll_core_m5_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0484>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m6_ck: dpll_core_m6_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x04d8>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0488>, <0x0420>, <0x042c>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a8>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_ddr_ck: dpll_ddr_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0494>, <0x0434>, <0x0440>;
-	};
-
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a0>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_ddr_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_disp_ck: dpll_disp_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0498>, <0x0448>, <0x0454>;
-	};
-
-	dpll_disp_m2_ck: dpll_disp_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_disp_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a4>;
-		ti,index-starts-at-one;
-		ti,set-rate-parent;
-	};
-
-	dpll_per_ck: dpll_per_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-j-type-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x048c>, <0x0470>, <0x049c>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		reg = <0x04ac>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	cefuse_fck: cefuse_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_clkin_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0a20>;
-	};
-
-	clk_24mhz: clk_24mhz {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	clkdiv32k_ck: clkdiv32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&clk_24mhz>;
-		clock-mult = <1>;
-		clock-div = <732>;
-	};
-
-	clkdiv32k_ick: clkdiv32k_ick {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x014c>;
-	};
-
-	l3_gclk: l3_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	pruss_ocp_gclk: pruss_ocp_gclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
-		reg = <0x0530>;
-	};
-
-	mmu_fck: mmu_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_core_m4_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0914>;
-	};
-
-	timer1_fck: timer1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
-		reg = <0x0528>;
-	};
-
-	timer2_fck: timer2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x0508>;
-	};
-
-	timer3_fck: timer3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x050c>;
-	};
-
-	timer4_fck: timer4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x0510>;
-	};
-
-	timer5_fck: timer5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x0518>;
-	};
-
-	timer6_fck: timer6_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x051c>;
-	};
-
-	timer7_fck: timer7_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x0504>;
-	};
-
-	usbotg_fck: usbotg_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x047c>;
-	};
-
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	ieee5000_fck: ieee5000_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x00e4>;
-	};
-
-	wdt1_fck: wdt1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
-		reg = <0x0538>;
-	};
-
-	l4_rtc_gclk: l4_rtc_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l4hs_gclk: l4hs_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3s_gclk: l3s_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4fw_gclk: l4fw_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4ls_gclk: l4ls_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sysclk_div_ck: sysclk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
-		reg = <0x0520>;
-	};
-
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>;
-		reg = <0x053c>;
-	};
-
-	gpio0_dbclk: gpio0_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&gpio0_dbclk_mux_ck>;
-		ti,bit-shift = <18>;
-		reg = <0x0408>;
-	};
-
-	gpio1_dbclk: gpio1_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <18>;
-		reg = <0x00ac>;
-	};
-
-	gpio2_dbclk: gpio2_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <18>;
-		reg = <0x00b0>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <18>;
-		reg = <0x00b4>;
-	};
-
-	lcd_gclk: lcd_gclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
-		reg = <0x0534>;
-		ti,set-rate-parent;
-	};
-
-	mmc_clk: mmc_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x052c>;
-	};
-
-	gfx_fck_div_ck: gfx_fck_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&gfx_fclk_clksel_ck>;
-		reg = <0x052c>;
-		ti,max-div = <2>;
-	};
-
-	sysclkout_pre_ck: sysclkout_pre_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
-		reg = <0x0700>;
-	};
-
-	clkout2_div_ck: clkout2_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sysclkout_pre_ck>;
-		ti,bit-shift = <3>;
-		ti,max-div = <8>;
-		reg = <0x0700>;
-	};
-
-	dbg_sysclk_ck: dbg_sysclk_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_clkin_ck>;
-		ti,bit-shift = <19>;
-		reg = <0x0414>;
-	};
-
-	dbg_clka_ck: dbg_clka_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_core_m4_ck>;
-		ti,bit-shift = <30>;
-		reg = <0x0414>;
-	};
-
-	stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0414>;
-	};
-
-	trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0414>;
-	};
-
-	stm_clk_div_ck: stm_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&stm_pmd_clock_mux_ck>;
-		ti,bit-shift = <27>;
-		ti,max-div = <64>;
-		reg = <0x0414>;
-		ti,index-power-of-two;
-	};
-
-	trace_clk_div_ck: trace_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&trace_pmd_clk_mux_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <64>;
-		reg = <0x0414>;
-		ti,index-power-of-two;
-	};
-
-	clkout2_ck: clkout2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkout2_div_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0700>;
-	};
-};
-
-&prcm_clockdomains {
-	clk_24mhz_clkdm: clk_24mhz_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&clkdiv32k_ick>;
-	};
-};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
deleted file mode 100644
index 831810583823..000000000000
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ /dev/null
@@ -1,853 +0,0 @@
-/*
- * Device Tree Source for AM33XX SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/am33xx.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "ti,am33xx";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		d_can0 = &dcan0;
-		d_can1 = &dcan1;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		phy0 = &usb0_phy;
-		phy1 = &usb1_phy;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			device_type = "cpu";
-			reg = <0>;
-
-			/*
-			 * To consider voltage drop between PMIC and SoC,
-			 * tolerance value is reduced to 2% from 4% and
-			 * voltage value is increased as a precaution.
-			 */
-			operating-points = <
-				/* kHz    uV */
-				720000  1285000
-				600000  1225000
-				500000  1125000
-				275000  1125000
-			>;
-			voltage-tolerance = <2>; /* 2 percentage */
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a8-pmu";
-		interrupts = <3>;
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap3-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	am33xx_pinmux: pinmux@44e10800 {
-		compatible = "pinctrl-single";
-		reg = <0x44e10800 0x0238>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x7f>;
-	};
-
-	/*
-	 * XXX: Use a flat representation of the AM33XX interconnect.
-	 * The real AM33XX interconnect network is quite complex. Since
-	 * it will not bring real advantage to represent that in DT
-	 * for the moment, just use a fake OCP bus entry to represent
-	 * the whole bus hierarchy.
-	 */
-	ocp {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-
-		prcm: prcm@44e00000 {
-			compatible = "ti,am3-prcm";
-			reg = <0x44e00000 0x4000>;
-
-			prcm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prcm_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@44e10000 {
-			compatible = "ti,am3-scrm";
-			reg = <0x44e10000 0x2000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		cm: syscon@44e10000 {
-			compatible = "ti,am33xx-controlmodule", "syscon";
-			reg = <0x44e10000 0x800>;
-		};
-
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,am33xx-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x48200000 0x1000>;
-		};
-
-		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x40>;
-			interrupts = <12 13 14>;
-			#dma-cells = <1>;
-		};
-
-		gpio0: gpio@44e07000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio1";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x44e07000 0x1000>;
-			interrupts = <96>;
-		};
-
-		gpio1: gpio@4804c000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio2";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x4804c000 0x1000>;
-			interrupts = <98>;
-		};
-
-		gpio2: gpio@481ac000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio3";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x481ac000 0x1000>;
-			interrupts = <32>;
-		};
-
-		gpio3: gpio@481ae000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio4";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x481ae000 0x1000>;
-			interrupts = <62>;
-		};
-
-		uart0: serial@44e09000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-			reg = <0x44e09000 0x2000>;
-			interrupts = <72>;
-			status = "disabled";
-		};
-
-		uart1: serial@48022000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-			reg = <0x48022000 0x2000>;
-			interrupts = <73>;
-			status = "disabled";
-		};
-
-		uart2: serial@48024000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-			reg = <0x48024000 0x2000>;
-			interrupts = <74>;
-			status = "disabled";
-		};
-
-		uart3: serial@481a6000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-			reg = <0x481a6000 0x2000>;
-			interrupts = <44>;
-			status = "disabled";
-		};
-
-		uart4: serial@481a8000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart5";
-			clock-frequency = <48000000>;
-			reg = <0x481a8000 0x2000>;
-			interrupts = <45>;
-			status = "disabled";
-		};
-
-		uart5: serial@481aa000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart6";
-			clock-frequency = <48000000>;
-			reg = <0x481aa000 0x2000>;
-			interrupts = <46>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@44e0b000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-			reg = <0x44e0b000 0x1000>;
-			interrupts = <70>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@4802a000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-			reg = <0x4802a000 0x1000>;
-			interrupts = <71>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@4819c000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-			reg = <0x4819c000 0x1000>;
-			interrupts = <30>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@48060000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			ti,needs-special-hs-handling;
-			dmas = <&edma 24
-				&edma 25>;
-			dma-names = "tx", "rx";
-			interrupts = <64>;
-			interrupt-parent = <&intc>;
-			reg = <0x48060000 0x1000>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@481d8000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&edma 2
-				&edma 3>;
-			dma-names = "tx", "rx";
-			interrupts = <28>;
-			interrupt-parent = <&intc>;
-			reg = <0x481d8000 0x1000>;
-			status = "disabled";
-		};
-
-		mmc3: mmc@47810000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			interrupts = <29>;
-			interrupt-parent = <&intc>;
-			reg = <0x47810000 0x1000>;
-			status = "disabled";
-		};
-
-		hwspinlock: spinlock@480ca000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x480ca000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
-		};
-
-		wdt2: wdt@44e35000 {
-			compatible = "ti,omap3-wdt";
-			ti,hwmods = "wd_timer2";
-			reg = <0x44e35000 0x1000>;
-			interrupts = <91>;
-		};
-
-		dcan0: d_can@481cc000 {
-			compatible = "bosch,d_can";
-			ti,hwmods = "d_can0";
-			reg = <0x481cc000 0x2000
-				0x44e10644 0x4>;
-			interrupts = <52>;
-			status = "disabled";
-		};
-
-		dcan1: d_can@481d0000 {
-			compatible = "bosch,d_can";
-			ti,hwmods = "d_can1";
-			reg = <0x481d0000 0x2000
-				0x44e10644 0x4>;
-			interrupts = <55>;
-			status = "disabled";
-		};
-
-		mailbox: mailbox@480C8000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x480C8000 0x200>;
-			interrupts = <77>;
-			ti,hwmods = "mailbox";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <8>;
-			mbox_wkupm3: wkup_m3 {
-				ti,mbox-tx = <0 0 0>;
-				ti,mbox-rx = <0 0 3>;
-			};
-		};
-
-		timer1: timer@44e31000 {
-			compatible = "ti,am335x-timer-1ms";
-			reg = <0x44e31000 0x400>;
-			interrupts = <67>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		timer2: timer@48040000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48040000 0x400>;
-			interrupts = <68>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48042000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48042000 0x400>;
-			interrupts = <69>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@48044000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48044000 0x400>;
-			interrupts = <92>;
-			ti,hwmods = "timer4";
-			ti,timer-pwm;
-		};
-
-		timer5: timer@48046000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48046000 0x400>;
-			interrupts = <93>;
-			ti,hwmods = "timer5";
-			ti,timer-pwm;
-		};
-
-		timer6: timer@48048000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48048000 0x400>;
-			interrupts = <94>;
-			ti,hwmods = "timer6";
-			ti,timer-pwm;
-		};
-
-		timer7: timer@4804a000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x4804a000 0x400>;
-			interrupts = <95>;
-			ti,hwmods = "timer7";
-			ti,timer-pwm;
-		};
-
-		rtc: rtc@44e3e000 {
-			compatible = "ti,da830-rtc";
-			reg = <0x44e3e000 0x1000>;
-			interrupts = <75
-				      76>;
-			ti,hwmods = "rtc";
-		};
-
-		spi0: spi@48030000 {
-			compatible = "ti,omap4-mcspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x48030000 0x400>;
-			interrupts = <65>;
-			ti,spi-num-cs = <2>;
-			ti,hwmods = "spi0";
-			dmas = <&edma 16
-				&edma 17
-				&edma 18
-				&edma 19>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-			status = "disabled";
-		};
-
-		spi1: spi@481a0000 {
-			compatible = "ti,omap4-mcspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x481a0000 0x400>;
-			interrupts = <125>;
-			ti,spi-num-cs = <2>;
-			ti,hwmods = "spi1";
-			dmas = <&edma 42
-				&edma 43
-				&edma 44
-				&edma 45>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-			status = "disabled";
-		};
-
-		usb: usb@47400000 {
-			compatible = "ti,am33xx-usb";
-			reg = <0x47400000 0x1000>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ti,hwmods = "usb_otg_hs";
-			status = "disabled";
-
-			usb_ctrl_mod: control@44e10620 {
-				compatible = "ti,am335x-usb-ctrl-module";
-				reg = <0x44e10620 0x10
-					0x44e10648 0x4>;
-				reg-names = "phy_ctrl", "wakeup";
-				status = "disabled";
-			};
-
-			usb0_phy: usb-phy@47401300 {
-				compatible = "ti,am335x-usb-phy";
-				reg = <0x47401300 0x100>;
-				reg-names = "phy";
-				status = "disabled";
-				ti,ctrl_mod = <&usb_ctrl_mod>;
-			};
-
-			usb0: usb@47401000 {
-				compatible = "ti,musb-am33xx";
-				status = "disabled";
-				reg = <0x47401400 0x400
-					0x47401000 0x200>;
-				reg-names = "mc", "control";
-
-				interrupts = <18>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb0_phy>;
-
-				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
-					&cppi41dma  2 0 &cppi41dma  3 0
-					&cppi41dma  4 0 &cppi41dma  5 0
-					&cppi41dma  6 0 &cppi41dma  7 0
-					&cppi41dma  8 0 &cppi41dma  9 0
-					&cppi41dma 10 0 &cppi41dma 11 0
-					&cppi41dma 12 0 &cppi41dma 13 0
-					&cppi41dma 14 0 &cppi41dma  0 1
-					&cppi41dma  1 1 &cppi41dma  2 1
-					&cppi41dma  3 1 &cppi41dma  4 1
-					&cppi41dma  5 1 &cppi41dma  6 1
-					&cppi41dma  7 1 &cppi41dma  8 1
-					&cppi41dma  9 1 &cppi41dma 10 1
-					&cppi41dma 11 1 &cppi41dma 12 1
-					&cppi41dma 13 1 &cppi41dma 14 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			usb1_phy: usb-phy@47401b00 {
-				compatible = "ti,am335x-usb-phy";
-				reg = <0x47401b00 0x100>;
-				reg-names = "phy";
-				status = "disabled";
-				ti,ctrl_mod = <&usb_ctrl_mod>;
-			};
-
-			usb1: usb@47401800 {
-				compatible = "ti,musb-am33xx";
-				status = "disabled";
-				reg = <0x47401c00 0x400
-					0x47401800 0x200>;
-				reg-names = "mc", "control";
-				interrupts = <19>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb1_phy>;
-
-				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
-					&cppi41dma 17 0 &cppi41dma 18 0
-					&cppi41dma 19 0 &cppi41dma 20 0
-					&cppi41dma 21 0 &cppi41dma 22 0
-					&cppi41dma 23 0 &cppi41dma 24 0
-					&cppi41dma 25 0 &cppi41dma 26 0
-					&cppi41dma 27 0 &cppi41dma 28 0
-					&cppi41dma 29 0 &cppi41dma 15 1
-					&cppi41dma 16 1 &cppi41dma 17 1
-					&cppi41dma 18 1 &cppi41dma 19 1
-					&cppi41dma 20 1 &cppi41dma 21 1
-					&cppi41dma 22 1 &cppi41dma 23 1
-					&cppi41dma 24 1 &cppi41dma 25 1
-					&cppi41dma 26 1 &cppi41dma 27 1
-					&cppi41dma 28 1 &cppi41dma 29 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			cppi41dma: dma-controller@47402000 {
-				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
-				reg-names = "glue", "controller", "scheduler", "queuemgr";
-				interrupts = <17>;
-				interrupt-names = "glue";
-				#dma-cells = <2>;
-				#dma-channels = <30>;
-				#dma-requests = <256>;
-				status = "disabled";
-			};
-		};
-
-		epwmss0: epwmss@48300000 {
-			compatible = "ti,am33xx-pwmss";
-			reg = <0x48300000 0x10>;
-			ti,hwmods = "epwmss0";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges = <0x48300100 0x48300100 0x80   /* ECAP */
-				  0x48300180 0x48300180 0x80   /* EQEP */
-				  0x48300200 0x48300200 0x80>; /* EHRPWM */
-
-			ecap0: ecap@48300100 {
-				compatible = "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48300100 0x80>;
-				interrupts = <31>;
-				interrupt-names = "ecap0";
-				ti,hwmods = "ecap0";
-				status = "disabled";
-			};
-
-			ehrpwm0: ehrpwm@48300200 {
-				compatible = "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48300200 0x80>;
-				ti,hwmods = "ehrpwm0";
-				status = "disabled";
-			};
-		};
-
-		epwmss1: epwmss@48302000 {
-			compatible = "ti,am33xx-pwmss";
-			reg = <0x48302000 0x10>;
-			ti,hwmods = "epwmss1";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges = <0x48302100 0x48302100 0x80   /* ECAP */
-				  0x48302180 0x48302180 0x80   /* EQEP */
-				  0x48302200 0x48302200 0x80>; /* EHRPWM */
-
-			ecap1: ecap@48302100 {
-				compatible = "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48302100 0x80>;
-				interrupts = <47>;
-				interrupt-names = "ecap1";
-				ti,hwmods = "ecap1";
-				status = "disabled";
-			};
-
-			ehrpwm1: ehrpwm@48302200 {
-				compatible = "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48302200 0x80>;
-				ti,hwmods = "ehrpwm1";
-				status = "disabled";
-			};
-		};
-
-		epwmss2: epwmss@48304000 {
-			compatible = "ti,am33xx-pwmss";
-			reg = <0x48304000 0x10>;
-			ti,hwmods = "epwmss2";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges = <0x48304100 0x48304100 0x80   /* ECAP */
-				  0x48304180 0x48304180 0x80   /* EQEP */
-				  0x48304200 0x48304200 0x80>; /* EHRPWM */
-
-			ecap2: ecap@48304100 {
-				compatible = "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48304100 0x80>;
-				interrupts = <61>;
-				interrupt-names = "ecap2";
-				ti,hwmods = "ecap2";
-				status = "disabled";
-			};
-
-			ehrpwm2: ehrpwm@48304200 {
-				compatible = "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48304200 0x80>;
-				ti,hwmods = "ehrpwm2";
-				status = "disabled";
-			};
-		};
-
-		mac: ethernet@4a100000 {
-			compatible = "ti,cpsw";
-			ti,hwmods = "cpgmac0";
-			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-			clock-names = "fck", "cpts";
-			cpdma_channels = <8>;
-			ale_entries = <1024>;
-			bd_ram_size = <0x2000>;
-			no_bd_ram = <0>;
-			rx_descs = <64>;
-			mac_control = <0x20>;
-			slaves = <2>;
-			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
-			cpts_clock_shift = <29>;
-			reg = <0x4a100000 0x800
-			       0x4a101200 0x100>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			interrupt-parent = <&intc>;
-			/*
-			 * c0_rx_thresh_pend
-			 * c0_rx_pend
-			 * c0_tx_pend
-			 * c0_misc_pend
-			 */
-			interrupts = <40 41 42 43>;
-			ranges;
-			syscon = <&cm>;
-			status = "disabled";
-
-			davinci_mdio: mdio@4a101000 {
-				compatible = "ti,davinci_mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "davinci_mdio";
-				bus_freq = <1000000>;
-				reg = <0x4a101000 0x100>;
-				status = "disabled";
-			};
-
-			cpsw_emac0: slave@4a100200 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			cpsw_emac1: slave@4a100300 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			phy_sel: cpsw-phy-sel@44e10650 {
-				compatible = "ti,am3352-cpsw-phy-sel";
-				reg= <0x44e10650 0x4>;
-				reg-names = "gmii-sel";
-			};
-		};
-
-		ocmcram: ocmcram@40300000 {
-			compatible = "mmio-sram";
-			reg = <0x40300000 0x10000>; /* 64k */
-		};
-
-		wkup_m3: wkup_m3@44d00000 {
-			compatible = "ti,am3353-wkup-m3";
-			reg = <0x44d00000 0x4000	/* M3 UMEM */
-			       0x44d80000 0x2000>;	/* M3 DMEM */
-			ti,hwmods = "wkup_m3";
-			ti,no-reset-on-init;
-		};
-
-		elm: elm@48080000 {
-			compatible = "ti,am3352-elm";
-			reg = <0x48080000 0x2000>;
-			interrupts = <4>;
-			ti,hwmods = "elm";
-			status = "disabled";
-		};
-
-		lcdc: lcdc@4830e000 {
-			compatible = "ti,am33xx-tilcdc";
-			reg = <0x4830e000 0x1000>;
-			interrupt-parent = <&intc>;
-			interrupts = <36>;
-			ti,hwmods = "lcdc";
-			status = "disabled";
-		};
-
-		tscadc: tscadc@44e0d000 {
-			compatible = "ti,am3359-tscadc";
-			reg = <0x44e0d000 0x1000>;
-			interrupt-parent = <&intc>;
-			interrupts = <16>;
-			ti,hwmods = "adc_tsc";
-			status = "disabled";
-
-			tsc {
-				compatible = "ti,am3359-tsc";
-			};
-			am335x_adc: adc {
-				#io-channel-cells = <1>;
-				compatible = "ti,am3359-adc";
-			};
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			ti,no-idle-on-init;
-			reg = <0x50000000 0x2000>;
-			interrupts = <100>;
-			gpmc,num-cs = <7>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
-
-		sham: sham@53100000 {
-			compatible = "ti,omap4-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x200>;
-			interrupts = <109>;
-			dmas = <&edma 36>;
-			dma-names = "rx";
-		};
-
-		aes: aes@53500000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53500000 0xa0>;
-			interrupts = <103>;
-			dmas = <&edma 6>,
-			       <&edma 5>;
-			dma-names = "tx", "rx";
-		};
-
-		mcasp0: mcasp@48038000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp0";
-			reg = <0x48038000 0x2000>,
-			      <0x46000000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <80>, <81>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 8>,
-				<&edma 9>;
-			dma-names = "tx", "rx";
-		};
-
-		mcasp1: mcasp@4803C000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp1";
-			reg = <0x4803C000 0x2000>,
-			      <0x46400000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <82>, <83>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 10>,
-				<&edma 11>;
-			dma-names = "tx", "rx";
-		};
-
-		rng: rng@48310000 {
-			compatible = "ti,omap4-rng";
-			ti,hwmods = "rng";
-			reg = <0x48310000 0x2000>;
-			interrupts = <111>;
-		};
-	};
-};
-
-/include/ "am33xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
deleted file mode 100644
index b4127c6493a2..000000000000
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am3517.dtsi"
-
-/ {
-	model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
-	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-        vmmc_fixed: vmmc {
-                compatible = "regulator-fixed";
-                regulator-name = "vmmc_fixed";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-        };
-};
-
-&davinci_emac {
-	     status = "okay";
-};
-
-&davinci_mdio {
-	     status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc_fixed>;
-	bus-width = <4>;
-};
-
-&mmc2 {
-      status = "disabled";
-};
-
-&mmc3 {
-      status = "disabled";
-};
-
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
deleted file mode 100644
index 5a452fdd7c5d..000000000000
--- a/arch/arm/boot/dts/am3517.dtsi
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Device Tree Source for am3517 SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "omap3.dtsi"
-
-/ {
-	aliases {
-		serial3 = &uart4;
-	};
-
-	ocp {
-		am35x_otg_hs: am35x_otg_hs@5c040000 {
-			compatible = "ti,omap3-musb";
-			ti,hwmods = "am35x_otg_hs";
-			status = "disabled";
-			reg = <0x5c040000 0x1000>;
-			interrupts = <71>;
-			interrupt-names = "mc";
-		};
-
-		davinci_emac: ethernet@0x5c000000 {
-			compatible = "ti,am3517-emac";
-			ti,hwmods = "davinci_emac";
-			status = "disabled";
-			reg = <0x5c000000 0x30000>;
-			interrupts = <67 68 69 70>;
-			ti,davinci-ctrl-reg-offset = <0x10000>;
-			ti,davinci-ctrl-mod-reg-offset = <0>;
-			ti,davinci-ctrl-ram-offset = <0x20000>;
-			ti,davinci-ctrl-ram-size = <0x2000>;
-			ti,davinci-rmii-en = /bits/ 8 <1>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-		};
-
-		davinci_mdio: ethernet@0x5c030000 {
-			compatible = "ti,davinci_mdio";
-			ti,hwmods = "davinci_mdio";
-			status = "disabled";
-			reg = <0x5c030000 0x1000>;
-			bus_freq = <1000000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		uart4: serial@4809e000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart4";
-			status = "disabled";
-			reg = <0x4809e000 0x400>;
-			interrupts = <84>;
-			dmas = <&sdma 55 &sdma 54>;
-			dma-names = "tx", "rx";
-			clock-frequency = <48000000>;
-		};
-	};
-};
-
-&iva {
-	status = "disabled";
-};
-
-&mailbox {
-	status = "disabled";
-};
-
-&mmu_isp {
-	status = "disabled";
-};
-
-&smartreflex_mpu_iva {
-	status = "disabled";
-};
-
-/include/ "am35xx-clocks.dtsi"
-/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts
deleted file mode 100644
index fdf5ce63c8e6..000000000000
--- a/arch/arm/boot/dts/am3517_mt_ventoux.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-
-/ {
-	model = "TeeJet Mt.Ventoux";
-	compatible = "teejet,mt_ventoux", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	/* AM35xx doesn't have IVA */
-	soc {
-		iva {
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
deleted file mode 100644
index df489d310b50..000000000000
--- a/arch/arm/boot/dts/am35xx-clocks.dtsi
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Device Tree Source for OMAP3 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&scrm_clocks {
-	emac_ick: emac_ick {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x059c>;
-		ti,bit-shift = <1>;
-	};
-
-	emac_fck: emac_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&rmii_ck>;
-		reg = <0x059c>;
-		ti,bit-shift = <9>;
-	};
-
-	vpfe_ick: vpfe_ick {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x059c>;
-		ti,bit-shift = <2>;
-	};
-
-	vpfe_fck: vpfe_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&pclk_ck>;
-		reg = <0x059c>;
-		ti,bit-shift = <10>;
-	};
-
-	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x059c>;
-		ti,bit-shift = <0>;
-	};
-
-	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x059c>;
-		ti,bit-shift = <8>;
-	};
-
-	hecc_ck: hecc_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x059c>;
-		ti,bit-shift = <3>;
-	};
-};
-&cm_clocks {
-	ipss_ick: ipss_ick {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
-	};
-
-	rmii_ck: rmii_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <50000000>;
-	};
-
-	pclk_ck: pclk_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-	};
-
-	uart4_ick_am35xx: uart4_ick_am35xx {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <23>;
-	};
-
-	uart4_fck_am35xx: uart4_fck_am35xx {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <23>;
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>, <&ipss_ick>, <&emac_ick>, <&vpfe_ick>,
-			 <&hsotgusb_ick_am35xx>, <&hsotgusb_fck_am35xx>,
-			 <&hecc_ck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
-			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
-			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&uart4_ick_am35xx>, <&uart4_fck_am35xx>;
-	};
-};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
deleted file mode 100644
index 46660ffd2b65..000000000000
--- a/arch/arm/boot/dts/am4372.dtsi
+++ /dev/null
@@ -1,902 +0,0 @@
-/*
- * Device Tree Source for AM4372 SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "ti,am4372", "ti,am43";
-	interrupt-parent = <&gic>;
-
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		serial0 = &uart0;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu: cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-	};
-
-	gic: interrupt-controller@48241000 {
-		compatible = "arm,cortex-a9-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x48241000 0x1000>,
-		      <0x48240100 0x0100>;
-	};
-
-	l2-cache-controller@48242000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x48242000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	am43xx_pinmux: pinmux@44e10800 {
-		compatible = "ti,am437-padconf", "pinctrl-single";
-		reg = <0x44e10800 0x31c>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0xffffffff>;
-	};
-
-	ocp {
-		compatible = "ti,am4372-l3-noc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-		reg = <0x44000000 0x400000
-		       0x44800000 0x400000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-
-		prcm: prcm@44df0000 {
-			compatible = "ti,am4-prcm";
-			reg = <0x44df0000 0x11000>;
-
-			prcm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prcm_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@44e10000 {
-			compatible = "ti,am4-scrm";
-			reg = <0x44e10000 0x2000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x10>;
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-		};
-
-		uart0: serial@44e09000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x44e09000 0x2000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart1";
-		};
-
-		uart1: serial@48022000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x48022000 0x2000>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart2";
-			status = "disabled";
-		};
-
-		uart2: serial@48024000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x48024000 0x2000>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart3";
-			status = "disabled";
-		};
-
-		uart3: serial@481a6000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x481a6000 0x2000>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart4";
-			status = "disabled";
-		};
-
-		uart4: serial@481a8000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x481a8000 0x2000>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart5";
-			status = "disabled";
-		};
-
-		uart5: serial@481aa000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x481aa000 0x2000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart6";
-			status = "disabled";
-		};
-
-		mailbox: mailbox@480C8000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x480C8000 0x200>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <8>;
-			mbox_wkupm3: wkup_m3 {
-				ti,mbox-tx = <0 0 0>;
-				ti,mbox-rx = <0 0 3>;
-			};
-		};
-
-		timer1: timer@44e31000 {
-			compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
-			reg = <0x44e31000 0x400>;
-			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-alwon;
-			ti,hwmods = "timer1";
-		};
-
-		timer2: timer@48040000  {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48040000  0x400>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48042000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48042000 0x400>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer3";
-			status = "disabled";
-		};
-
-		timer4: timer@48044000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48044000 0x400>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer4";
-			status = "disabled";
-		};
-
-		timer5: timer@48046000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48046000 0x400>;
-			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer5";
-			status = "disabled";
-		};
-
-		timer6: timer@48048000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48048000 0x400>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer6";
-			status = "disabled";
-		};
-
-		timer7: timer@4804a000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x4804a000 0x400>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer7";
-			status = "disabled";
-		};
-
-		timer8: timer@481c1000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x481c1000 0x400>;
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer8";
-			status = "disabled";
-		};
-
-		timer9: timer@4833d000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x4833d000 0x400>;
-			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer9";
-			status = "disabled";
-		};
-
-		timer10: timer@4833f000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x4833f000 0x400>;
-			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer10";
-			status = "disabled";
-		};
-
-		timer11: timer@48341000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48341000 0x400>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer11";
-			status = "disabled";
-		};
-
-		counter32k: counter@44e86000 {
-			compatible = "ti,am4372-counter32k","ti,omap-counter32k";
-			reg = <0x44e86000 0x40>;
-			ti,hwmods = "counter_32k";
-		};
-
-		rtc: rtc@44e3e000 {
-			compatible = "ti,am4372-rtc","ti,da830-rtc";
-			reg = <0x44e3e000 0x1000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "rtc";
-			status = "disabled";
-		};
-
-		wdt: wdt@44e35000 {
-			compatible = "ti,am4372-wdt","ti,omap3-wdt";
-			reg = <0x44e35000 0x1000>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "wd_timer2";
-		};
-
-		gpio0: gpio@44e07000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x44e07000 0x1000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio1";
-			status = "disabled";
-		};
-
-		gpio1: gpio@4804c000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x4804c000 0x1000>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio2";
-			status = "disabled";
-		};
-
-		gpio2: gpio@481ac000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x481ac000 0x1000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio3";
-			status = "disabled";
-		};
-
-		gpio3: gpio@481ae000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x481ae000 0x1000>;
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio4";
-			status = "disabled";
-		};
-
-		gpio4: gpio@48320000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x48320000 0x1000>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio5";
-			status = "disabled";
-		};
-
-		gpio5: gpio@48322000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x48322000 0x1000>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio6";
-			status = "disabled";
-		};
-
-		hwspinlock: spinlock@480ca000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x480ca000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
-		};
-
-		i2c0: i2c@44e0b000 {
-			compatible = "ti,am4372-i2c","ti,omap4-i2c";
-			reg = <0x44e0b000 0x1000>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "i2c1";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@4802a000 {
-			compatible = "ti,am4372-i2c","ti,omap4-i2c";
-			reg = <0x4802a000 0x1000>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "i2c2";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@4819c000 {
-			compatible = "ti,am4372-i2c","ti,omap4-i2c";
-			reg = <0x4819c000 0x1000>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "i2c3";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi0: spi@48030000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x48030000 0x400>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi0";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@48060000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x48060000 0x1000>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			dmas = <&edma 24
-				&edma 25>;
-			dma-names = "tx", "rx";
-			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@481d8000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x481d8000 0x1000>;
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&edma 2
-				&edma 3>;
-			dma-names = "tx", "rx";
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		mmc3: mmc@47810000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x47810000 0x1000>;
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		spi1: spi@481a0000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x481a0000 0x400>;
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi1";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi2: spi@481a2000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x481a2000 0x400>;
-			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi2";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi3: spi@481a4000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x481a4000 0x400>;
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi3";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi4: spi@48345000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x48345000 0x400>;
-			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi4";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mac: ethernet@4a100000 {
-			compatible = "ti,am4372-cpsw","ti,cpsw";
-			reg = <0x4a100000 0x800
-			       0x4a101200 0x100>;
-			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ti,hwmods = "cpgmac0";
-			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-			clock-names = "fck", "cpts";
-			status = "disabled";
-			cpdma_channels = <8>;
-			ale_entries = <1024>;
-			bd_ram_size = <0x2000>;
-			no_bd_ram = <0>;
-			rx_descs = <64>;
-			mac_control = <0x20>;
-			slaves = <2>;
-			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
-			cpts_clock_shift = <29>;
-			ranges;
-
-			davinci_mdio: mdio@4a101000 {
-				compatible = "ti,am4372-mdio","ti,davinci_mdio";
-				reg = <0x4a101000 0x100>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "davinci_mdio";
-				bus_freq = <1000000>;
-				status = "disabled";
-			};
-
-			cpsw_emac0: slave@4a100200 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			cpsw_emac1: slave@4a100300 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			phy_sel: cpsw-phy-sel@44e10650 {
-				compatible = "ti,am43xx-cpsw-phy-sel";
-				reg= <0x44e10650 0x4>;
-				reg-names = "gmii-sel";
-			};
-		};
-
-		epwmss0: epwmss@48300000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48300000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss0";
-			status = "disabled";
-
-			ecap0: ecap@48300100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48300100 0x80>;
-				ti,hwmods = "ecap0";
-				status = "disabled";
-			};
-
-			ehrpwm0: ehrpwm@48300200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48300200 0x80>;
-				ti,hwmods = "ehrpwm0";
-				status = "disabled";
-			};
-		};
-
-		epwmss1: epwmss@48302000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48302000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss1";
-			status = "disabled";
-
-			ecap1: ecap@48302100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48302100 0x80>;
-				ti,hwmods = "ecap1";
-				status = "disabled";
-			};
-
-			ehrpwm1: ehrpwm@48302200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48302200 0x80>;
-				ti,hwmods = "ehrpwm1";
-				status = "disabled";
-			};
-		};
-
-		epwmss2: epwmss@48304000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48304000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss2";
-			status = "disabled";
-
-			ecap2: ecap@48304100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48304100 0x80>;
-				ti,hwmods = "ecap2";
-				status = "disabled";
-			};
-
-			ehrpwm2: ehrpwm@48304200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48304200 0x80>;
-				ti,hwmods = "ehrpwm2";
-				status = "disabled";
-			};
-		};
-
-		epwmss3: epwmss@48306000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48306000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss3";
-			status = "disabled";
-
-			ehrpwm3: ehrpwm@48306200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48306200 0x80>;
-				ti,hwmods = "ehrpwm3";
-				status = "disabled";
-			};
-		};
-
-		epwmss4: epwmss@48308000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48308000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss4";
-			status = "disabled";
-
-			ehrpwm4: ehrpwm@48308200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48308200 0x80>;
-				ti,hwmods = "ehrpwm4";
-				status = "disabled";
-			};
-		};
-
-		epwmss5: epwmss@4830a000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x4830a000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss5";
-			status = "disabled";
-
-			ehrpwm5: ehrpwm@4830a200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x4830a200 0x80>;
-				ti,hwmods = "ehrpwm5";
-				status = "disabled";
-			};
-		};
-
-		sham: sham@53100000 {
-			compatible = "ti,omap5-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x300>;
-			dmas = <&edma 36>;
-			dma-names = "rx";
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		aes: aes@53501000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53501000 0xa0>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 6
-				&edma 5>;
-			dma-names = "tx", "rx";
-		};
-
-		des: des@53701000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x53701000 0xa0>;
-			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 34
-				&edma 33>;
-			dma-names = "tx", "rx";
-		};
-
-		mcasp0: mcasp@48038000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp0";
-			reg = <0x48038000 0x2000>,
-			      <0x46000000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <80>, <81>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 8>,
-			       <&edma 9>;
-			dma-names = "tx", "rx";
-		};
-
-		mcasp1: mcasp@4803C000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp1";
-			reg = <0x4803C000 0x2000>,
-			      <0x46400000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <82>, <83>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 10>,
-			       <&edma 11>;
-			dma-names = "tx", "rx";
-		};
-
-		elm: elm@48080000 {
-			compatible = "ti,am3352-elm";
-			reg = <0x48080000 0x2000>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "elm";
-			clocks = <&l4ls_gclk>;
-			clock-names = "fck";
-			status = "disabled";
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			clocks = <&l3s_gclk>;
-			clock-names = "fck";
-			reg = <0x50000000 0x2000>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			gpmc,num-cs = <7>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
-
-		am43xx_control_usb2phy1: control-phy@44e10620 {
-			compatible = "ti,control-phy-usb2-am437";
-			reg = <0x44e10620 0x4>;
-			reg-names = "power";
-		};
-
-		am43xx_control_usb2phy2: control-phy@0x44e10628 {
-			compatible = "ti,control-phy-usb2-am437";
-			reg = <0x44e10628 0x4>;
-			reg-names = "power";
-		};
-
-		ocp2scp0: ocp2scp@483a8000 {
-			compatible = "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "ocp2scp0";
-
-			usb2_phy1: phy@483a8000 {
-				compatible = "ti,am437x-usb2";
-				reg = <0x483a8000 0x8000>;
-				ctrl-module = <&am43xx_control_usb2phy1>;
-				clocks = <&usb_phy0_always_on_clk32k>,
-					 <&usb_otg_ss0_refclk960m>;
-				clock-names = "wkupclk", "refclk";
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		ocp2scp1: ocp2scp@483e8000 {
-			compatible = "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "ocp2scp1";
-
-			usb2_phy2: phy@483e8000 {
-				compatible = "ti,am437x-usb2";
-				reg = <0x483e8000 0x8000>;
-				ctrl-module = <&am43xx_control_usb2phy2>;
-				clocks = <&usb_phy1_always_on_clk32k>,
-					 <&usb_otg_ss1_refclk960m>;
-				clock-names = "wkupclk", "refclk";
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		dwc3_1: omap_dwc3@48380000 {
-			compatible = "ti,am437x-dwc3";
-			ti,hwmods = "usb_otg_ss0";
-			reg = <0x48380000 0x10000>;
-			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <1>;
-			ranges;
-
-			usb1: usb@48390000 {
-				compatible = "synopsys,dwc3";
-				reg = <0x48390000 0x10000>;
-				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy1>;
-				phy-names = "usb2-phy";
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-				status = "disabled";
-			};
-		};
-
-		dwc3_2: omap_dwc3@483c0000 {
-			compatible = "ti,am437x-dwc3";
-			ti,hwmods = "usb_otg_ss1";
-			reg = <0x483c0000 0x10000>;
-			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <1>;
-			ranges;
-
-			usb2: usb@483d0000 {
-				compatible = "synopsys,dwc3";
-				reg = <0x483d0000 0x10000>;
-				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy2>;
-				phy-names = "usb2-phy";
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-				status = "disabled";
-			};
-		};
-
-		qspi: qspi@47900000 {
-			compatible = "ti,am4372-qspi";
-			reg = <0x47900000 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "qspi";
-			interrupts = <0 138 0x4>;
-			num-cs = <4>;
-			status = "disabled";
-		};
-
-		hdq: hdq@48347000 {
-			compatible = "ti,am43xx-hdq";
-			reg = <0x48347000 0x1000>;
-			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&func_12m_clk>;
-			clock-names = "fck";
-			ti,hwmods = "hdq1w";
-			status = "disabled";
-		};
-
-		dss: dss@4832a000 {
-			compatible = "ti,omap3-dss";
-			reg = <0x4832a000 0x200>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			clocks = <&disp_clk>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc: dispc@4832a400 {
-				compatible = "ti,omap3-dispc";
-				reg = <0x4832a400 0x400>;
-				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&disp_clk>;
-				clock-names = "fck";
-			};
-
-			rfbi: rfbi@4832a800 {
-				compatible = "ti,omap3-rfbi";
-				reg = <0x4832a800 0x100>;
-				ti,hwmods = "dss_rfbi";
-				clocks = <&disp_clk>;
-				clock-names = "fck";
-			};
-		};
-
-		ocmcram: ocmcram@40300000 {
-			compatible = "mmio-sram";
-			reg = <0x40300000 0x40000>; /* 256k */
-		};
-	};
-};
-
-/include/ "am43xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
deleted file mode 100644
index e7ac47fa6615..000000000000
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ /dev/null
@@ -1,513 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* AM437x GP EVM */
-
-/dts-v1/;
-
-#include "am4372.dtsi"
-#include <dt-bindings/pinctrl/am43xx.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "TI AM437x GP EVM";
-	compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
-
-	aliases {
-		display0 = &lcd0;
-	};
-
-	vmmcsd_fixed: fixedregulator-sd {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-	};
-
-	vtt_fixed: fixedregulator-vtt {
-		compatible = "regulator-fixed";
-		regulator-name = "vtt_fixed";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-		gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	matrix_keypad: matrix_keypad@0 {
-		compatible = "gpio-matrix-keypad";
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <2>;
-
-		row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
-				&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
-				&gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
-
-		col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
-				&gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
-
-		linux,keymap = <0x00000201      /* P1 */
-				0x00010202      /* P2 */
-				0x01000067      /* UP */
-				0x0101006a      /* RIGHT */
-				0x02000069      /* LEFT */
-				0x0201006c>;      /* DOWN */
-		};
-
-	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
-		label = "lcd";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		/*
-		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
-		 * panel's enable GPIO, but we don't have HDMI driver support nor
-		 * support to switch between two displays, so using this gpio as
-		 * panel's enable should be safe.
-		 */
-		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
-
-		panel-timing {
-			clock-frequency = <33000000>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <210>;
-			hback-porch = <16>;
-			hsync-len = <30>;
-			vback-porch = <10>;
-			vfront-porch = <22>;
-			vsync-len = <13>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-};
-
-&am43xx_pinmux {
-	i2c0_pins: i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c1_pins: i2c1_pins {
-		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	ecap0_pins: backlight_pins {
-		pinctrl-single,pins = <
-			0x164 MUX_MODE0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
-		>;
-	};
-
-	pixcir_ts_pins: pixcir_ts_pins {
-		pinctrl-single,pins = <
-			0x264 (PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	nand_flash_x8: nand_flash_x8 {
-		pinctrl-single,pins = <
-			0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* spi2_cs0.gpio/eMMCorNANDsel */
-			0x0  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-
-	dss_pins: dss_pins {
-		pinctrl-single,pins = <
-			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
-			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
-			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
-
-		>;
-	};
-
-	lcd_pins: lcd_pins {
-		pinctrl-single,pins = <
-			/* GPIO 5_8 to select LCD / HDMI */
-			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
-		>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <100000>;
-
-	tps65218: tps65218@24 {
-		reg = <0x24>;
-		compatible = "ti,tps65218";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
-		interrupt-parent = <&gic>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
-			regulator-name = "vdcdc3";
-			regulator-min-microvolt = <1350000>;
-			regulator-max-microvolt = <1350000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
-			regulator-name = "v1_0bat";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-		};
-
-		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
-			regulator-name = "v1_8bat";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	pixcir_ts@5c {
-		compatible = "pixcir,pixcir_tangoc";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pixcir_ts_pins>;
-		reg = <0x5c>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <22 0>;
-
-		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-
-		touchscreen-size-x = <1024>;
-		touchscreen-size-y = <600>;
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&ecap0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ecap0_pins>;
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&gpio4 {
-	status = "okay";
-};
-
-&gpio5 {
-	status = "okay";
-	ti,no-reset-on-init;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-};
-
-&usb2_phy1 {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usb2_phy2 {
-	status = "okay";
-};
-
-&usb2 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&mac {
-	slaves = <1>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii";
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_flash_x8>;
-	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
-	nand@0,0 {
-		reg = <0 0 4>;		/* device IO registers */
-		ti,nand-ecc-opt = "bch16";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <40>;
-		gpmc,cs-wr-off-ns = <40>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <25>;
-		gpmc,adv-wr-off-ns = <25>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <20>;
-		gpmc,oe-on-ns = <3>;
-		gpmc,oe-off-ns = <30>;
-		gpmc,access-ns = <30>;
-		gpmc,rd-cycle-ns = <40>;
-		gpmc,wr-cycle-ns = <40>;
-		gpmc,wait-pin = <0>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x00040000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00040000 0x00040000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x000c0000 0x00040000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00100000 0x00080000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x00180000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x00280000 0x00040000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x002c0000 0x00040000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00300000 0x00700000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00a00000 0x1f600000>;
-		};
-	};
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_pins>;
-
-	port {
-		dpi_out: endpoint@0 {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
deleted file mode 100644
index 859ff3d620ee..000000000000
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ /dev/null
@@ -1,613 +0,0 @@
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* AM437x SK EVM */
-
-/dts-v1/;
-
-#include "am4372.dtsi"
-#include <dt-bindings/pinctrl/am43xx.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "TI AM437x SK EVM";
-	compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
-
-	aliases {
-		display0 = &lcd0;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM437x-SK-EVM";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT";
-	};
-
-	matrix_keypad: matrix_keypad@0 {
-		compatible = "gpio-matrix-keypad";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&matrix_keypad_pins>;
-
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <1500>;
-
-		row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH		/* Bank5, pin5 */
-				&gpio5 6 GPIO_ACTIVE_HIGH>;	/* Bank5, pin6 */
-
-		col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH		/* Bank5, pin13 */
-				&gpio5 4 GPIO_ACTIVE_HIGH>;	/* Bank5, pin4 */
-
-		linux,keymap = <
-				MATRIX_KEY(0, 0, KEY_DOWN)
-				MATRIX_KEY(0, 1, KEY_RIGHT)
-				MATRIX_KEY(1, 0, KEY_LEFT)
-				MATRIX_KEY(1, 1, KEY_UP)
-			>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-
-		led@0 {
-			label = "am437x-sk:red:heartbeat";
-			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 0 */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led@1 {
-			label = "am437x-sk:green:mmc1";
-			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 1 */
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@2 {
-			label = "am437x-sk:blue:cpu0";
-			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 2 */
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "am437x-sk:blue:usr3";
-			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 3 */
-			default-state = "off";
-		};
-	};
-
-	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
-		label = "lcd";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-
-		panel-timing {
-			clock-frequency = <9000000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <8>;
-			hback-porch = <43>;
-			hsync-len = <4>;
-			vback-porch = <12>;
-			vfront-porch = <4>;
-			vsync-len = <10>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-};
-
-&am43xx_pinmux {
-	matrix_keypad_pins: matrix_keypad_pins {
-		pinctrl-single,pins = <
-			0x24c (PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
-			0x250 (PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
-			0x254 (PIN_INPUT | MUX_MODE7)	/* spi4_d0.gpio5_5 */
-			0x258 (PIN_INPUT | MUX_MODE7)	/* spi4_d1.gpio5_5 */
-		>;
-	};
-
-	leds_pins: leds_pins {
-		pinctrl-single,pins = <
-			0x228 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
-			0x22c (PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
-			0x230 (PIN_OUTPUT | MUX_MODE7)	/* uart3_ctsn.gpio5_0 */
-			0x234 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rtsn.gpio5_1 */
-		>;
-	};
-
-	i2c0_pins: i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c1_pins: i2c1_pins {
-		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	ecap0_pins: backlight_pins {
-		pinctrl-single,pins = <
-			0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
-		>;
-	};
-
-	edt_ft5306_ts_pins: edt_ft5306_ts_pins {
-		pinctrl-single,pins = <
-			0x74 (PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
-			0x78 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
-
-			/* Slave 2 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-
-			/* Slave 2 reset value */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	dss_pins: dss_pins {
-		pinctrl-single,pins = <
-			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
-			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
-			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS DATA 0 */
-			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS DATA 15 */
-			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS VSYNC */
-			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS HSYNC */
-			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS PCLK */
-			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS AC BIAS EN */
-
-		>;
-	};
-
-	qspi_pins: qspi_pins {
-		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
-			0x88 (PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
-			0x90 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
-			0x94 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
-			0x98 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
-			0x9c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
-		>;
-	};
-
-	mcasp1_pins: mcasp1_pins {
-		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
-		>;
-	};
-
-	lcd_pins: lcd_pins {
-		pinctrl-single,pins = <
-			/* GPIO 5_8 to select LCD / HDMI */
-			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
-		>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-
-	tps@24 {
-		compatible = "ti,tps65218";
-		reg = <0x24>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
-			/* VDD_CORE limits min of OPP50 and max of OPP100 */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
-			/* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
-			regulator-name = "vdds_ddr";
-			regulator-min-microvolt = <1350000>;
-			regulator-max-microvolt = <1350000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc4: regulator-dcdc4 {
-			compatible = "ti,tps65218-dcdc4";
-			regulator-name = "v3_3d";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
-			regulator-name = "v1_8d";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-	};
-
-	at24@50 {
-		compatible = "at24,24c256";
-		pagesize = <64>;
-		reg = <0x50>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <400000>;
-
-	edt-ft5306@38 {
-		status = "okay";
-		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
-		pinctrl-names = "default";
-		pinctrl-0 = <&edt_ft5306_ts_pins>;
-
-		reg = <0x38>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <31 0>;
-
-		wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-
-		touchscreen-size-x = <480>;
-		touchscreen-size-y = <272>;
-	};
-
-	tlv320aic3106: tlv320aic3106@1b {
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&dcdc4>;
-		IOVDD-supply = <&dcdc4>;
-		DRVDD-supply = <&dcdc4>;
-		DVDD-supply = <&ldo1>;
-	};
-
-	lis331dlh@18 {
-		compatible = "st,lis331dlh";
-		reg = <0x18>;
-		status = "okay";
-
-		Vdd-supply = <&dcdc4>;
-		Vdd_IO-supply = <&dcdc4>;
-		interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&ecap0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ecap0_pins>;
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio5 {
-	status = "okay";
-};
-
-&mmc1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-
-	vmmc-supply = <&dcdc4>;
-	bus-width = <4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-};
-
-&usb2_phy1 {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usb2_phy2 {
-	status = "okay";
-};
-
-&usb2 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&qspi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi_pins>;
-
-	spi-max-frequency = <48000000>;
-	m25p80@0 {
-		compatible = "mx66l51235l";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-cpol;
-		spi-cpha;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first 512KiB
-		 * for a valid file to boot(XIP).
-		 */
-		partition@0 {
-			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
-		};
-		partition@1 {
-			label = "QSPI.U_BOOT.backup";
-			reg = <0x00080000 0x00080000>;
-		};
-		partition@2 {
-			label = "QSPI.U-BOOT-SPL_OS";
-			reg = <0x00100000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.U_BOOT_ENV";
-			reg = <0x00110000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.U-BOOT-ENV.backup";
-			reg = <0x00120000 0x00010000>;
-		};
-		partition@5 {
-			label = "QSPI.KERNEL";
-			reg = <0x00130000 0x0800000>;
-		};
-		partition@6 {
-			label = "QSPI.FILESYSTEM";
-			reg = <0x00930000 0x36D0000>;
-		};
-	};
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <4>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <5>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <2>;
-};
-
-&elm {
-	status = "okay";
-};
-
-&mcasp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcasp1_pins>;
-
-	status = "okay";
-
-	op-mode = <0>;
-	tdm-slots = <2>;
-	serial-dir = <
-		0 0 1 2
-	>;
-
-	tx-num-evt = <1>;
-	rx-num-evt = <1>;
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_pins>;
-
-	port {
-		dpi_out: endpoint@0 {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
deleted file mode 100644
index ac3e4859935f..000000000000
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ /dev/null
@@ -1,628 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* AM43x EPOS EVM */
-
-/dts-v1/;
-
-#include "am4372.dtsi"
-#include <dt-bindings/pinctrl/am43xx.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "TI AM43x EPOS EVM";
-	compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
-
-	aliases {
-		display0 = &lcd0;
-	};
-
-	vmmcsd_fixed: fixedregulator-sd {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-	};
-
-	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
-		label = "lcd";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		/*
-		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
-		 * panel's enable GPIO, but we don't have HDMI driver support nor
-		 * support to switch between two displays, so using this gpio as
-		 * panel's enable should be safe.
-		 */
-		enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-
-		panel-timing {
-			clock-frequency = <33000000>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <210>;
-			hback-porch = <16>;
-			hsync-len = <30>;
-			vback-porch = <10>;
-			vfront-porch = <22>;
-			vsync-len = <13>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-	am43xx_pinmux: pinmux@44e10800 {
-		cpsw_default: cpsw_default {
-			pinctrl-single,pins = <
-				/* Slave 1 */
-				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
-			>;
-		};
-
-		cpsw_sleep: cpsw_sleep {
-			pinctrl-single,pins = <
-				/* Slave 1 reset value */
-				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		davinci_mdio_default: davinci_mdio_default {
-			pinctrl-single,pins = <
-				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-			>;
-		};
-
-		davinci_mdio_sleep: davinci_mdio_sleep {
-			pinctrl-single,pins = <
-				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		i2c0_pins: pinmux_i2c0_pins {
-			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			>;
-		};
-
-		nand_flash_x8: nand_flash_x8 {
-			pinctrl-single,pins = <
-				0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
-				0x0  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-				0x4  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-				0x8  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-				0xc  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-				0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-				0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-				0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-				0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-				0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-				0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
-				0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-				0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-				0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-				0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-				0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-			>;
-		};
-
-		ecap0_pins: backlight_pins {
-			pinctrl-single,pins = <
-				0x164 MUX_MODE0         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
-			>;
-		};
-
-		i2c2_pins: pinmux_i2c2_pins {
-			pinctrl-single,pins = <
-				0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
-				0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
-			>;
-		};
-
-		spi0_pins: pinmux_spi0_pins {
-			pinctrl-single,pins = <
-				0x150 (PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
-				0x154 (PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
-				0x158 (PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
-				0x15c (PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
-			>;
-		};
-
-		spi1_pins: pinmux_spi1_pins {
-			pinctrl-single,pins = <
-				0x190 (PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
-				0x194 (PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
-				0x198 (PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
-				0x19c (PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
-			>;
-		};
-
-		mmc1_pins: pinmux_mmc1_pins {
-			pinctrl-single,pins = <
-				0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-			>;
-		};
-
-		qspi1_default: qspi1_default {
-			pinctrl-single,pins = <
-				0x7c (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x88 (PIN_INPUT_PULLUP | MUX_MODE2)
-				0x90 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x94 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x98 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x9c (PIN_INPUT_PULLUP | MUX_MODE3)
-			>;
-		};
-
-		pixcir_ts_pins: pixcir_ts_pins {
-			pinctrl-single,pins = <
-				0x44 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
-			>;
-		};
-
-		hdq_pins: pinmux_hdq_pins {
-			pinctrl-single,pins = <
-				0x234 (PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
-			>;
-		};
-
-		dss_pins: dss_pins {
-			pinctrl-single,pins = <
-				0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
-				0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
-				0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-				0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-				0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-				0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-				0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-				0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
-			>;
-		};
-
-		lcd_pins: lcd_pins {
-			pinctrl-single,pins = <
-				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
-				0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
-			>;
-		};
-	};
-
-	matrix_keypad: matrix_keypad@0 {
-			compatible = "gpio-matrix-keypad";
-			debounce-delay-ms = <5>;
-			col-scan-delay-us = <2>;
-
-			row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
-				     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
-				     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
-				     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
-
-			col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
-				     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
-				     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
-				     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
-
-			linux,keymap = <0x00000201	/* P1 */
-				0x01000204	/* P4 */
-				0x02000207	/* P7 */
-				0x0300020a	/* NUMERIC_STAR */
-				0x00010202	/* P2 */
-				0x01010205	/* P5 */
-				0x02010208	/* P8 */
-				0x03010200	/* P0 */
-				0x00020203	/* P3 */
-				0x01020206	/* P6 */
-				0x02020209	/* P9 */
-				0x0302020b	/* NUMERIC_POUND */
-				0x00030067	/* UP */
-				0x0103006a	/* RIGHT */
-				0x0203006c	/* DOWN */
-				0x03030069>;	/* LEFT */
-		};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <16>;
-	phy-mode = "rmii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rmii";
-};
-
-&phy_sel {
-	rmii-clock-ext;
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-
-	tps65218: tps65218@24 {
-		reg = <0x24>;
-		compatible = "ti,tps65218";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
-		interrupt-parent = <&gic>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
-			regulator-name = "vdcdc3";
-			regulator-min-microvolt = <1350000>;
-			regulator-max-microvolt = <1350000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
-			regulator-name = "v1_0bat";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-		};
-
-		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
-			regulator-name = "v1_8bat";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-
-	at24@50 {
-		compatible = "at24,24c256";
-		pagesize = <64>;
-		reg = <0x50>;
-	};
-
-	pixcir_ts@5c {
-		compatible = "pixcir,pixcir_tangoc";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pixcir_ts_pins>;
-		reg = <0x5c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 0>;
-
-		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-
-		touchscreen-size-x = <1024>;
-		touchscreen-size-y = <600>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	status = "okay";
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio2 {
-	status = "okay";
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";	/* Disable QSPI when enabling GPMC (NAND) */
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_flash_x8>;
-	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-	nand@0,0 {
-		reg = <0 0 0>; /* CS0, offset 0 */
-		ti,nand-ecc-opt = "bch16";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */
-		gpmc,cs-wr-off-ns = <40>;
-		gpmc,adv-on-ns = <0>;  /* cs-on-ns */
-		gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */
-		gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */
-		gpmc,we-on-ns = <0>;   /* cs-on-ns */
-		gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */
-		gpmc,oe-on-ns = <3>;  /* cs-on-ns + tRR + 2 */
-		gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */
-		gpmc,access-ns = <30>; /* tCEA + 4*/
-		gpmc,rd-cycle-ns = <40>;
-		gpmc,wr-cycle-ns = <40>;
-		gpmc,wait-pin = <0>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x00040000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00040000 0x00040000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x000C0000 0x00040000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00100000 0x00080000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x00180000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x00280000 0x00040000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x002C0000 0x00040000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00300000 0x00700000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00a00000 0x1f600000>;
-		};
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&ecap0 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap0_pins>;
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-	status = "okay";
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
-	status = "okay";
-};
-
-&usb2_phy1 {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usb2_phy2 {
-	status = "okay";
-};
-
-&usb2 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&qspi {
-	status = "disabled";	/* Disable GPMC (NAND) when enabling QSPI */
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi1_default>;
-
-	spi-max-frequency = <48000000>;
-	m25p80@0 {
-		compatible = "mx66l51235l";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-cpol;
-		spi-cpha;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first 512KiB
-		 * for a valid file to boot(XIP).
-		 */
-		partition@0 {
-			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
-		};
-		partition@1 {
-			label = "QSPI.U_BOOT.backup";
-			reg = <0x00080000 0x00080000>;
-		};
-		partition@2 {
-			label = "QSPI.U-BOOT-SPL_OS";
-			reg = <0x00100000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.U_BOOT_ENV";
-			reg = <0x00110000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.U-BOOT-ENV.backup";
-			reg = <0x00120000 0x00010000>;
-		};
-		partition@5 {
-			label = "QSPI.KERNEL";
-			reg = <0x00130000 0x0800000>;
-		};
-		partition@6 {
-			label = "QSPI.FILESYSTEM";
-			reg = <0x00930000 0x36D0000>;
-		};
-	};
-};
-
-&hdq {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdq_pins>;
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_pins>;
-
-	port {
-		dpi_out: endpoint@0 {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
deleted file mode 100644
index c7dc9dab93a4..000000000000
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ /dev/null
@@ -1,757 +0,0 @@
-/*
- * Device Tree Source for AM43xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&scrm_clocks {
-	sys_clkin_ck: sys_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
-		ti,bit-shift = <31>;
-		reg = <0x0040>;
-	};
-
-	crystal_freq_sel_ck: crystal_freq_sel_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <29>;
-		reg = <0x0040>;
-	};
-
-	sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0040>;
-	};
-
-	adc_tsc_fck: adc_tsc_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan0_fck: dcan0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan1_fck: dcan1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp0_fck: mcasp0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp1_fck: mcasp1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex0_fck: smartreflex0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex1_fck: smartreflex1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sha0_fck: sha0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	aes0_fck: aes0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ehrpwm0_tbclk: ehrpwm0_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm1_tbclk: ehrpwm1_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm3_tbclk: ehrpwm3_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm4_tbclk: ehrpwm4_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm5_tbclk: ehrpwm5_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0664>;
-	};
-};
-&prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	clk_rc32k_ck: clk_rc32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_24000000_ck: virt_24000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	virt_25000000_ck: virt_25000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	tclkin_ck: tclkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	dpll_core_ck: dpll_core_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-core-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d20>, <0x2d24>, <0x2d2c>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_m4_ck: dpll_core_m4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d38>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m5_ck: dpll_core_m5_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d3c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m6_ck: dpll_core_m6_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d40>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d70>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_ddr_ck: dpll_ddr_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2da0>, <0x2da4>, <0x2dac>;
-	};
-
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2db0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_disp_ck: dpll_disp_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
-	};
-
-	dpll_disp_m2_ck: dpll_disp_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_disp_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e30>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		ti,set-rate-parent;
-	};
-
-	dpll_per_ck: dpll_per_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-j-type-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2de0>, <0x2de4>, <0x2dec>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2df0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	clk_24mhz: clk_24mhz {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	clkdiv32k_ck: clkdiv32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&clk_24mhz>;
-		clock-mult = <1>;
-		clock-div = <732>;
-	};
-
-	clkdiv32k_ick: clkdiv32k_ick {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x2a38>;
-	};
-
-	sysclk_div: sysclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	pruss_ocp_gclk: pruss_ocp_gclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
-		reg = <0x4248>;
-	};
-
-	clk_32k_tpm_ck: clk_32k_tpm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	timer1_fck: timer1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4200>;
-	};
-
-	timer2_fck: timer2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4204>;
-	};
-
-	timer3_fck: timer3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4208>;
-	};
-
-	timer4_fck: timer4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x420c>;
-	};
-
-	timer5_fck: timer5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4210>;
-	};
-
-	timer6_fck: timer6_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4214>;
-	};
-
-	timer7_fck: timer7_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4218>;
-	};
-
-	wdt1_fck: wdt1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
-		reg = <0x422c>;
-	};
-
-	l3_gclk: l3_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sysclk_div>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l4hs_gclk: l4hs_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3s_gclk: l3s_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4ls_gclk: l4ls_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
-		reg = <0x4238>;
-	};
-
-	clk_32k_mosc_ck: clk_32k_mosc_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4240>;
-	};
-
-	gpio0_dbclk: gpio0_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&gpio0_dbclk_mux_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x2b68>;
-	};
-
-	gpio1_dbclk: gpio1_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c78>;
-	};
-
-	gpio2_dbclk: gpio2_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c80>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c88>;
-	};
-
-	gpio4_dbclk: gpio4_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c90>;
-	};
-
-	gpio5_dbclk: gpio5_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c98>;
-	};
-
-	mmc_clk: mmc_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x423c>;
-	};
-
-	gfx_fck_div_ck: gfx_fck_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&gfx_fclk_clksel_ck>;
-		reg = <0x423c>;
-		ti,max-div = <2>;
-	};
-
-	disp_clk: disp_clk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
-		reg = <0x4244>;
-		ti,set-rate-parent;
-	};
-
-	dpll_extdev_ck: dpll_extdev_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
-	};
-
-	dpll_extdev_m2_ck: dpll_extdev_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_extdev_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e70>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mux_synctimer32k_ck: mux_synctimer32k_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
-		reg = <0x4230>;
-	};
-
-	synctimer_32kclk: synctimer_32kclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&mux_synctimer32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x2a30>;
-	};
-
-	timer8_fck: timer8_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x421c>;
-	};
-
-	timer9_fck: timer9_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4220>;
-	};
-
-	timer10_fck: timer10_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4224>;
-	};
-
-	timer11_fck: timer11_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4228>;
-	};
-
-	cpsw_50m_clkdiv: cpsw_50m_clkdiv {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_5m_clkdiv: cpsw_5m_clkdiv {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&cpsw_50m_clkdiv>;
-		clock-mult = <1>;
-		clock-div = <10>;
-	};
-
-	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_ddr_ck>;
-	};
-
-	dpll_ddr_m4_ck: dpll_ddr_m4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2db8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_clkdcoldo: dpll_per_clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll_per_ck>;
-		ti,clock-mult = <1>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e14>;
-		ti,invert-autoidle-bit;
-	};
-
-	dll_aging_clk_div: dll_aging_clk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin_ck>;
-		reg = <0x4250>;
-		ti,dividers = <8>, <16>, <32>;
-	};
-
-	div_core_25m_ck: div_core_25m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sysclk_div>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	func_12m_clk: func_12m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	vtp_clk_div: vtp_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usbphy_32khz_clkmux: usbphy_32khz_clkmux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4260>;
-	};
-
-	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&usbphy_32khz_clkmux>;
-		ti,bit-shift = <8>;
-		reg = <0x2a40>;
-	};
-
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&usbphy_32khz_clkmux>;
-		ti,bit-shift = <8>;
-		reg = <0x2a48>;
-	};
-
-	usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x8a60>;
-	};
-
-	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x8a68>;
-	};
-};
diff --git a/arch/arm/boot/dts/amazon/Makefile b/arch/arm/boot/dts/amazon/Makefile
new file mode 100644
index 000000000000..58af5c4846ef
--- /dev/null
+++ b/arch/arm/boot/dts/amazon/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ALPINE) += \
+	alpine-db.dtb
+dtb-$(CONFIG_ARCH_ALPINE) += \
+	alpine-db.dtb
diff --git a/arch/arm/boot/dts/amazon/alpine-db.dts b/arch/arm/boot/dts/amazon/alpine-db.dts
new file mode 100644
index 000000000000..dfb5a0802273
--- /dev/null
+++ b/arch/arm/boot/dts/amazon/alpine-db.dts
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2015 Annapurna Labs Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * Alternatively, redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   *   Redistributions of source code must retain the above copyright notice,
+ *       this list of conditions and the following disclaimer.
+ *
+ *   *   Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+/dts-v1/;
+
+#include "alpine.dtsi"
+
+/ {
+	model = "Annapurna Labs Alpine Dev Board";
+	/* no need for anything outside SOC */
+};
+
diff --git a/arch/arm/boot/dts/amazon/alpine.dtsi b/arch/arm/boot/dts/amazon/alpine.dtsi
new file mode 100644
index 000000000000..90bd12feac01
--- /dev/null
+++ b/arch/arm/boot/dts/amazon/alpine.dtsi
@@ -0,0 +1,175 @@
+/*
+ * Copyright 2015 Annapurna Labs Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * Alternatively, redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   *   Redistributions of source code must retain the above copyright notice,
+ *       this list of conditions and the following disclaimer.
+ *
+ *   *   Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	/* SOC compatibility */
+	compatible = "al,alpine";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;
+	};
+
+	/* CPU Configuration */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "al,alpine-smp";
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <1700000000>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+			clock-frequency = <1700000000>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+			clock-frequency = <1700000000>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+			clock-frequency = <1700000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		arch-timer {
+			compatible = "arm,cortex-a15-timer",
+				     "arm,armv7-timer";
+			interrupts =
+				<GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			clock-frequency = <50000000>;
+		};
+
+		/* Interrupt Controller */
+		gic: interrupt-controller@fb001000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			#size-cells = <0>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfb001000 0x0 0x1000>,
+			      <0x0 0xfb002000 0x0 0x2000>,
+			      <0x0 0xfb004000 0x0 0x2000>,
+			      <0x0 0xfb006000 0x0 0x2000>;
+			interrupts =
+				<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		/* CPU Resume registers */
+		cpu-resume@fbff5ec0 {
+			compatible = "al,alpine-cpu-resume";
+			reg = <0x0 0xfbff5ec0 0x0 0x30>;
+		};
+
+		/* North Bridge Service Registers */
+		sysfabric-service@fb070000 {
+			compatible = "al,alpine-sysfabric-service", "syscon";
+			reg = <0x0 0xfb070000 0x0 0x10000>;
+		};
+
+		/* Performance Monitor Unit */
+		pmu {
+			compatible = "arm,cortex-a15-pmu";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		uart0: serial@fd883000 {
+			compatible = "ns16550a";
+			reg = <0x0 0xfd883000 0x0 0x1000>;
+			clock-frequency = <375000000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uart1: serial@fd884000 {
+			compatible = "ns16550a";
+			reg = <0x0 0xfd884000 0x0 0x1000>;
+			clock-frequency = <375000000>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		/* Internal PCIe Controller */
+		pcie@fbc00000 {
+			compatible = "pci-host-ecam-generic";
+			device_type = "pci";
+			#size-cells = <2>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			reg = <0x0 0xfbc00000 0x0 0x100000>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			/* Add legacy interrupts for SATA devices only */
+			interrupt-map = <0x4000 0 0 1 &gic 0 43 4>,
+					<0x4800 0 0 1 &gic 0 44 4>;
+
+			/* 32 bit non prefetchable memory space */
+			ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
+
+			bus-range = <0x00 0x00>;
+			msi-parent = <&msix>;
+		};
+
+		msix: msix@fbe00000 {
+			compatible = "al,alpine-msix";
+			reg = <0x0 0xfbe00000 0x0 0x100000>;
+			msi-controller;
+			al,msi-base-spi = <96>;
+			al,msi-num-spis = <64>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/amlogic/Makefile b/arch/arm/boot/dts/amlogic/Makefile
new file mode 100644
index 000000000000..3c8a1e88b386
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_MESON8) += \
+	meson8-minix-neo-x8.dtb \
+	meson8-fernsehfee3.dtb \
+	meson8b-ec100.dtb \
+	meson8b-mxq.dtb \
+	meson8b-odroidc1.dtb \
+	meson8m2-mxiii-plus.dtb
diff --git a/arch/arm/boot/dts/amlogic/meson.dtsi b/arch/arm/boot/dts/amlogic/meson.dtsi
new file mode 100644
index 000000000000..28ec2c821cdc
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson.dtsi
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&saradc 8>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		cbus: bus@c1100000 {
+			compatible = "simple-bus";
+			reg = <0xc1100000 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc1100000 0x200000>;
+
+			hhi: system-controller@4000 {
+				compatible = "amlogic,meson-hhi-sysctrl",
+					     "simple-mfd",
+					     "syscon";
+				reg = <0x4000 0x400>;
+			};
+
+			aiu: audio-controller@5400 {
+				compatible = "amlogic,aiu";
+				#sound-dai-cells = <2>;
+				sound-name-prefix = "AIU";
+				reg = <0x5400 0x2ac>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "i2s", "spdif";
+				status = "disabled";
+			};
+
+			assist: assist@7c00 {
+				compatible = "amlogic,meson-mx-assist", "syscon";
+				reg = <0x7c00 0x200>;
+			};
+
+			hwrng: rng@8100 {
+				compatible = "amlogic,meson-rng";
+				reg = <0x8100 0x8>;
+			};
+
+			uart_A: serial@84c0 {
+				compatible = "amlogic,meson6-uart";
+				reg = <0x84c0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				fifo-size = <128>;
+				status = "disabled";
+			};
+
+			uart_B: serial@84dc {
+				compatible = "amlogic,meson6-uart";
+				reg = <0x84dc 0x18>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_A: i2c@8500 {
+				compatible = "amlogic,meson6-i2c";
+				reg = <0x8500 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@8550 {
+				compatible = "amlogic,meson-pwm";
+				reg = <0x8550 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@8650 {
+				compatible = "amlogic,meson-pwm";
+				reg = <0x8650 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			saradc: adc@8680 {
+				compatible = "amlogic,meson-saradc";
+				reg = <0x8680 0x34>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			uart_C: serial@8700 {
+				compatible = "amlogic,meson6-uart";
+				reg = <0x8700 0x18>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_B: i2c@87c0 {
+				compatible = "amlogic,meson6-i2c";
+				reg = <0x87c0 0x20>;
+				interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			usb0_phy: phy@8800 {
+				compatible = "amlogic,meson-mx-usb2-phy";
+				#phy-cells = <0>;
+				reg = <0x8800 0x20>;
+				status = "disabled";
+			};
+
+			usb1_phy: phy@8820 {
+				compatible = "amlogic,meson-mx-usb2-phy";
+				#phy-cells = <0>;
+				reg = <0x8820 0x20>;
+				status = "disabled";
+			};
+
+			sdio: mmc@8c20 {
+				compatible = "amlogic,meson-mx-sdio";
+				reg = <0x8c20 0x20>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spifc: spi@8c80 {
+				compatible = "amlogic,meson6-spifc";
+				reg = <0x8c80 0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			sdhc: mmc@8e00 {
+				compatible = "amlogic,meson-mx-sdhc";
+				reg = <0x8e00 0x42>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			gpio_intc: interrupt-controller@9880 {
+				compatible = "amlogic,meson-gpio-intc";
+				reg = <0x9880 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+				status = "disabled";
+			};
+
+			wdt: watchdog@9900 {
+				compatible = "amlogic,meson6-wdt";
+				reg = <0x9900 0x8>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			timer_abcde: timer@9940 {
+				compatible = "amlogic,meson6-timer";
+				reg = <0x9940 0x18>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		L2: cache-controller@c4200000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xc4200000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		periph: bus@c4300000 {
+			compatible = "simple-bus";
+			reg = <0xc4300000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc4300000 0x10000>;
+
+			gic: interrupt-controller@1000 {
+				compatible = "arm,cortex-a9-gic";
+				reg = <0x1000 0x1000>,
+				      <0x100 0x100>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+		};
+
+		aobus: bus@c8100000 {
+			compatible = "simple-bus";
+			reg = <0xc8100000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc8100000 0x100000>;
+
+			ao_arc_rproc: remoteproc@1c {
+				compatible = "amlogic,meson-mx-ao-arc";
+				reg = <0x1c 0x8>, <0x38 0x8>;
+				reg-names = "remap", "cpu";
+				status = "disabled";
+			};
+
+			ir_receiver: ir-receiver@480 {
+				compatible = "amlogic,meson6-ir";
+				reg = <0x480 0x20>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			uart_AO: serial@4c0 {
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
+				reg = <0x4c0 0x18>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_AO: i2c@500 {
+				compatible = "amlogic,meson6-i2c";
+				reg = <0x500 0x20>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			rtc: rtc@740 {
+				compatible = "amlogic,meson6-rtc";
+				reg = <0x740 0x14>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		usb0: usb@c9040000 {
+			compatible = "snps,dwc2";
+			reg = <0xc9040000 0x40000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			g-rx-fifo-size = <512>;
+			g-np-tx-fifo-size = <500>;
+			g-tx-fifo-size = <256 192 128 128 128>;
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		usb1: usb@c90c0000 {
+			compatible = "snps,dwc2";
+			reg = <0xc90c0000 0x40000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		ethmac: ethernet@c9410000 {
+			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
+			reg = <0xc9410000 0x10000
+			       0xc1108108 0x4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		ahb_sram: sram@d9000000 {
+			compatible = "mmio-sram";
+			reg = <0xd9000000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xd9000000 0x20000>;
+		};
+
+		bootrom: bootrom@d9040000 {
+			compatible = "amlogic,meson-mx-bootrom", "syscon";
+			reg = <0xd9040000 0x10000>;
+		};
+
+		secbus: bus@da000000 {
+			compatible = "simple-bus";
+			reg = <0xda000000 0x6000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xda000000 0x6000>;
+
+			efuse: nvmem@0 {
+				compatible = "amlogic,meson6-efuse";
+				reg = <0x0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+		};
+	};
+
+	thermal_sensor: thermal-sensor {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&saradc 8>;
+		io-channel-names = "sensor-channel";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+}; /* end of / */
diff --git a/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts b/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts
new file mode 100644
index 000000000000..4e52447d51bd
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+// Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+#include "meson8.dtsi"
+
+/ {
+	model = "Fernsehfee 3.0";
+	compatible = "tcu,fernsehfee3", "amlogic,meson8";
+
+	aliases {
+		serial0 = &uart_AO;
+		gpiochip0 = &gpio;
+		gpiochip1 = &gpio_ao;
+		i2c0 = &i2c_AO;
+		i2c1 = &i2c_B;
+		mmc0 = &sdhc;
+		mmc1 = &sdio;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;  /* 1 GiB */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/*
+			 * The power LED can be turned red, otherwise it is green.
+			 */
+			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+
+	vcc_5v: regulator-5v {
+		/* 5V rail, always on as long as the system is running */
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-3v3 {
+		/* Chipown AP2420 step-down converter */
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v>;
+	};
+
+	wifi_3v3: regulator-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V-WIFI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+		gpio = <&gpio GPIOX_11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101A (0x02430c54) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_pins>;
+	pinctrl-names = "default";
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+		system-power-controller;
+
+		regulators {
+			vcck: DCDC1 {
+				regulator-name = "VCCK";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddee: DCDC2 {
+				/* the output is also used as VDDAO */
+				regulator-name = "VDD_EE";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			DCDC3 {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "VDDIO_AO28";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO2 {
+				regulator-name = "VDDIO_AO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc1v8_usb: LDO3 {
+				regulator-name = "VCC1V8_USB";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			LDO4 {
+				/* This one appears to be unused */
+				regulator-name = "VCC2V8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+			};
+
+			LDO5 {
+				regulator-name = "AVDD1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC1 {
+				regulator-name = "VDD_LDO";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC2 {
+				regulator-name = "RTC_0V9";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		/* Fairchild FM24C08A */
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+		wp-gpios = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		num-addresses = <4>;
+	};
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+
+	/* TODO: SiI9293 HDMI receiver @ 0x39 */
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&sdhc {
+	status = "okay";
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	/* eMMC */
+	bus-width = <8>;
+	max-frequency = <100000000>;
+
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sdio;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+&sdio {
+	status = "okay";
+	pinctrl-0 = <&sd_b_pins>;
+
+	/* SD card */
+	slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&vcc1v8_usb>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi: wifi@1 {
+		/* Realtek RTL8188 2.4GHz WiFi module */
+		compatible = "usbbda,179";
+		reg = <1>;
+		vdd-supply = <&wifi_3v3>;
+	};
+};
+
+&usb1_phy {
+	status = "okay";
+	phy-supply = <&vcc1v8_usb>;
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts
new file mode 100644
index 000000000000..62987eadc747
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2014 Beniamino Galvani <b.galvani@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "meson8.dtsi"
+
+/ {
+	model = "MINIX NEO-X8";
+	compatible = "minix,neo-x8", "amlogic,meson8";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			label = "x8:blue:power";
+			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_pins>;
+	pinctrl-names = "default";
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+		system-power-controller;
+
+		regulators {
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&spifc {
+	status = "okay";
+	pinctrl-0 = <&spi_nor_pins>;
+	pinctrl-names = "default";
+
+	flash@0 {
+		compatible = "mxicy,mx25l1606e";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x100000>;
+		};
+
+		partition@100000 {
+			label = "env";
+			reg = <0x100000 0x10000>;
+		};
+	};
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8.dtsi b/arch/arm/boot/dts/amlogic/meson8.dtsi
new file mode 100644
index 000000000000..a609b5a0fda4
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8.dtsi
@@ -0,0 +1,833 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ */
+
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
+#include <dt-bindings/clock/meson8b-clkc.h>
+#include <dt-bindings/gpio/meson8-gpio.h>
+#include <dt-bindings/power/meson8-power.h>
+#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
+#include <dt-bindings/reset/amlogic,meson8b-reset.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "meson.dtsi"
+
+/ {
+	model = "Amlogic Meson8 SoC";
+	compatible = "amlogic,meson8";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x200>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x201>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu2: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x202>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu3: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x203>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-96000000 {
+			opp-hz = /bits/ 64 <96000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-192000000 {
+			opp-hz = /bits/ 64 <192000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <875000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <925000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <975000>;
+		};
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1025000>;
+		};
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-1800000000 {
+			status = "disabled";
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1125000>;
+		};
+		opp-1992000000 {
+			status = "disabled";
+			opp-hz = /bits/ 64 <1992000000>;
+			opp-microvolt = <1150000>;
+		};
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-182142857 {
+			opp-hz = /bits/ 64 <182142857>;
+			opp-microvolt = <1150000>;
+		};
+		opp-318750000 {
+			opp-hz = /bits/ 64 <318750000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-425000000 {
+			opp-hz = /bits/ 64 <425000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-510000000 {
+			opp-hz = /bits/ 64 <510000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-637500000 {
+			opp-hz = /bits/ 64 <637500000>;
+			opp-microvolt = <1150000>;
+			turbo-mode;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* 2 MiB reserved for Hardware ROM Firmware? */
+		hwrom@0 {
+			reg = <0x0 0x200000>;
+			no-map;
+		};
+
+		/*
+		 * 1 MiB reserved for the "ARM Power Firmware": this is ARM
+		 * code which is responsible for system suspend. It loads a
+		 * piece of ARC code ("arc_power" in the vendor u-boot tree)
+		 * into SRAM, executes that and shuts down the (last) ARM core.
+		 * The arc_power firmware then checks various wakeup sources
+		 * (IR remote receiver, HDMI CEC, WIFI and Bluetooth wakeup or
+		 * simply the power key) and re-starts the ARM core once it
+		 * detects a wakeup request.
+		 */
+		power-firmware@4f00000 {
+			reg = <0x4f00000 0x100000>;
+			no-map;
+		};
+	};
+
+	thermal-zones {
+		soc-thermal {
+			polling-delay-passive = <250>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&thermal_sensor>;
+
+			cooling-maps {
+				map0 {
+					trip = <&soc_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&soc_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				soc_passive: soc-passive {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				soc_hot: soc-hot {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				soc_critical: soc-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	mmcbus: bus@c8000000 {
+		compatible = "simple-bus";
+		reg = <0xc8000000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xc8000000 0x8000>;
+
+		ddr_clkc: clock-controller@400 {
+			compatible = "amlogic,meson8-ddr-clkc";
+			reg = <0x400 0x20>;
+			clocks = <&xtal>;
+			clock-names = "xtal";
+			#clock-cells = <1>;
+		};
+
+		dmcbus: bus@6000 {
+			compatible = "simple-bus";
+			reg = <0x6000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x400>;
+
+			canvas: video-lut@20 {
+				compatible = "amlogic,meson8-canvas",
+					     "amlogic,canvas";
+				reg = <0x20 0x14>;
+			};
+		};
+	};
+
+	apb: bus@d0000000 {
+		compatible = "simple-bus";
+		reg = <0xd0000000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xd0000000 0x200000>;
+
+		mali: gpu@c0000 {
+			compatible = "amlogic,meson8-mali", "arm,mali-450";
+			reg = <0xc0000 0x40000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp", "gpmmu", "pp", "pmu",
+					  "pp0", "ppmmu0", "pp1", "ppmmu1",
+					  "pp2", "ppmmu2", "pp4", "ppmmu4",
+					  "pp5", "ppmmu5", "pp6", "ppmmu6";
+			resets = <&reset RESET_MALI>;
+
+			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+			clock-names = "bus", "core";
+
+			assigned-clocks = <&clkc CLKID_MALI>;
+			assigned-clock-rates = <318750000>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+}; /* end of / */
+
+&aiu {
+	compatible = "amlogic,aiu-meson8", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
+&aobus {
+	pmu: pmu@e0 {
+		compatible = "amlogic,meson8-pmu", "syscon";
+		reg = <0xe0 0x18>;
+	};
+
+	pinctrl_aobus: pinctrl@14 {
+		compatible = "amlogic,meson8-aobus-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x14 0x1c>;
+
+		gpio_ao: bank@0 {
+			reg = <0x0 0x4>,
+			      <0x18 0x4>,
+			      <0x10 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 16>;
+		};
+
+		i2s_am_clk_pins: i2s-am-clk-out {
+			mux {
+				groups = "i2s_am_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s-ao-clk-out {
+			mux {
+				groups = "i2s_ao_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s-lr-clk-out {
+			mux {
+				groups = "i2s_lr_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_ao_pins: i2s-out-ch01 {
+			mux {
+				groups = "i2s_out_ch01_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+				bias-pull-up;
+			};
+		};
+
+		i2c_ao_pins: i2c_mst_ao {
+			mux {
+				groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
+				function = "i2c_mst_ao";
+				bias-disable;
+			};
+		};
+
+		ir_recv_pins: remote {
+			mux {
+				groups = "remote_input";
+				function = "remote";
+				bias-disable;
+			};
+		};
+
+		pwm_f_ao_pins: pwm-f-ao {
+			mux {
+				groups = "pwm_f_ao";
+				function = "pwm_f_ao";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ao_arc_rproc {
+	compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
+	amlogic,secbus2 = <&secbus2>;
+	sram = <&ao_arc_sram>;
+	resets = <&reset RESET_MEDIA_CPU>;
+	clocks = <&clkc CLKID_AO_MEDIA_CPU>;
+};
+
+&cbus {
+	reset: reset-controller@4404 {
+		compatible = "amlogic,meson8b-reset";
+		reg = <0x4404 0x9c>;
+		#reset-cells = <1>;
+	};
+
+	analog_top: analog-top@81a8 {
+		compatible = "amlogic,meson8-analog-top", "syscon";
+		reg = <0x81a8 0x14>;
+	};
+
+	pwm_ef: pwm@86c0 {
+		compatible = "amlogic,meson8-pwm-v2";
+		clocks = <&xtal>,
+			 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+			 <&clkc CLKID_FCLK_DIV4>,
+			 <&clkc CLKID_FCLK_DIV3>;
+		reg = <0x86c0 0x10>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	clock-measure@8758 {
+		compatible = "amlogic,meson8-clk-measure";
+		reg = <0x8758 0x1c>;
+	};
+
+	pinctrl_cbus: pinctrl@8030 {
+		compatible = "amlogic,meson8-cbus-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x8030 0x108>;
+
+		gpio: bank@80 {
+			reg = <0x80 0x28>,
+			      <0xb8 0x18>,
+			      <0xf0 0x18>,
+			      <0x00 0x30>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_cbus 0 0 120>;
+		};
+
+		i2c_b_pins: i2c-b {
+			mux {
+				groups = "i2c_sda_b", "i2c_sck_b";
+				function = "i2c_b";
+				bias-disable;
+			};
+		};
+
+		sd_a_pins: sd-a {
+			mux {
+				groups = "sd_d0_a", "sd_d1_a", "sd_d2_a",
+					"sd_d3_a", "sd_clk_a", "sd_cmd_a";
+				function = "sd_a";
+				bias-disable;
+			};
+		};
+
+		sd_b_pins: sd-b {
+			mux {
+				groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
+					"sd_d3_b", "sd_clk_b", "sd_cmd_b";
+				function = "sd_b";
+				bias-disable;
+			};
+		};
+
+		sd_c_pins: sd-c {
+			mux {
+				groups = "sd_d0_c", "sd_d1_c", "sd_d2_c",
+					"sd_d3_c", "sd_clk_c", "sd_cmd_c";
+				function = "sd_c";
+				bias-disable;
+			};
+		};
+
+		sdxc_a_pins: sdxc-a {
+			mux {
+				groups = "sdxc_d0_a", "sdxc_d13_a",
+					 "sdxc_clk_a", "sdxc_cmd_a";
+				function = "sdxc_a";
+				bias-pull-up;
+			};
+		};
+
+		sdxc_b_pins: sdxc-b {
+			mux {
+				groups = "sdxc_d0_b", "sdxc_d13_b",
+					 "sdxc_clk_b", "sdxc_cmd_b";
+				function = "sdxc_b";
+				bias-pull-up;
+			};
+		};
+
+		sdxc_c_pins: sdxc-c {
+			mux {
+				groups = "sdxc_d0_c", "sdxc_d13_c",
+					"sdxc_clk_c", "sdxc_cmd_c",
+					"sdxc_d47_c";
+				function = "sdxc_c";
+				bias-pull-up;
+			};
+		};
+
+		spdif_out_pins: spdif-out {
+			mux {
+				groups = "spdif_out";
+				function = "spdif";
+				bias-disable;
+			};
+		};
+
+		spi_nor_pins: nor {
+			mux {
+				groups = "nor_d", "nor_q", "nor_c", "nor_cs";
+				function = "nor";
+				bias-disable;
+			};
+		};
+
+		eth_pins: ethernet {
+			mux {
+				groups = "eth_tx_clk_50m", "eth_tx_en",
+					 "eth_txd1", "eth_txd0",
+					 "eth_rx_clk_in", "eth_rx_dv",
+					 "eth_rxd1", "eth_rxd0", "eth_mdio",
+					 "eth_mdc";
+				function = "ethernet";
+				bias-disable;
+			};
+		};
+
+		pwm_e_pins: pwm-e {
+			mux {
+				groups = "pwm_e";
+				function = "pwm_e";
+				bias-disable;
+			};
+		};
+
+		uart_a1_pins: uart-a1 {
+			mux {
+				groups = "uart_tx_a1",
+				       "uart_rx_a1";
+				function = "uart_a";
+				bias-pull-up;
+			};
+		};
+
+		uart_a1_cts_rts_pins: uart-a1-cts-rts {
+			mux {
+				groups = "uart_cts_a1",
+				       "uart_rts_a1";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		xtal_32k_out_pins: xtal-32k-out {
+			mux {
+				groups = "xtal_32k_out";
+				function = "xtal";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ahb_sram {
+	ao_arc_sram: aoarc-sram@0 {
+		compatible = "amlogic,meson8-ao-arc-sram";
+		reg = <0x0 0x8000>;
+		pool;
+	};
+
+	smp-sram@1ff80 {
+		compatible = "amlogic,meson8-smp-sram";
+		reg = <0x1ff80 0x8>;
+	};
+};
+
+&efuse {
+	compatible = "amlogic,meson8-efuse";
+	clocks = <&clkc CLKID_EFUSE>;
+	clock-names = "core";
+
+	temperature_calib: calib@1f4 {
+		/* only the upper two bytes are relevant */
+		reg = <0x1f4 0x4>;
+	};
+};
+
+&ethmac {
+	clocks = <&clkc CLKID_ETH>;
+	clock-names = "stmmaceth";
+
+	power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson8-gpio-intc", "amlogic,meson-gpio-intc";
+	status = "okay";
+};
+
+&hhi {
+	clkc: clock-controller {
+		compatible = "amlogic,meson8-clkc";
+		clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+		clock-names = "xtal", "ddr_pll";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pwrc: power-controller {
+		compatible = "amlogic,meson8-pwrc";
+		#power-domain-cells = <1>;
+		amlogic,ao-sysctrl = <&pmu>;
+		clocks = <&clkc CLKID_VPU>;
+		clock-names = "vpu";
+		assigned-clocks = <&clkc CLKID_VPU>;
+		assigned-clock-rates = <364285714>;
+	};
+};
+
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&L2 {
+	arm,data-latency = <3 3 3>;
+	arm,tag-latency = <2 2 2>;
+	arm,filter-ranges = <0x100000 0xc0000000>;
+	prefetch-data = <1>;
+	prefetch-instr = <1>;
+	arm,prefetch-offset = <7>;
+	arm,double-linefill = <1>;
+	arm,prefetch-drop = <1>;
+	arm,shared-override;
+};
+
+&periph {
+	scu@0 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x0 0x100>;
+	};
+
+	timer@200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x200 0x20>;
+		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+
+		/*
+		 * the arm_global_timer driver currently does not handle clock
+		 * rate changes. Keep it disabled for now.
+		 */
+		status = "disabled";
+	};
+
+	timer@600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x600 0x20>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+	};
+};
+
+&pwm_ab {
+	compatible = "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_cd {
+	compatible = "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&rtc {
+	compatible = "amlogic,meson8-rtc";
+	resets = <&reset RESET_RTC>;
+};
+
+&saradc {
+	compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
+	clock-names = "clkin", "core";
+	amlogic,hhi-sysctrl = <&hhi>;
+	nvmem-cells = <&temperature_calib>;
+	nvmem-cell-names = "temperature_calib";
+};
+
+&sdhc {
+	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV5>,
+		 <&clkc CLKID_SDHC>;
+	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+};
+
+&secbus {
+	secbus2: system-controller@4000 {
+		compatible = "amlogic,meson8-secbus2", "syscon";
+		reg = <0x4000 0x2000>;
+	};
+};
+
+&sdio {
+	compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
+	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+	clock-names = "core", "clkin";
+};
+
+&spifc {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&timer_abcde {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk";
+};
+
+&uart_AO {
+	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_A {
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&usb0 {
+	compatible = "amlogic,meson8-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb1 {
+	compatible = "amlogic,meson8-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb0_phy {
+	compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
+
+&usb1_phy {
+	compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8b-ec100.dts b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts
new file mode 100644
index 000000000000..236999548094
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts
@@ -0,0 +1,479 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "meson8b.dtsi"
+
+/ {
+	model = "Endless Computers Endless Mini";
+	compatible = "endless,ec100", "amlogic,meson8b";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		pal-switch {
+			label = "pal";
+			linux,input-type = <EV_SW>;
+			linux,code = <KEY_SWITCHVIDEOMODE>;
+			gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
+		};
+
+		ntsc-switch {
+			label = "ntsc";
+			linux,input-type = <EV_SW>;
+			linux,code = <KEY_SWITCHVIDEOMODE>;
+			gpios = <&gpio GPIOH_8 GPIO_ACTIVE_HIGH>;
+		};
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio GPIOH_9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		/*
+		 * shutdown is managed by the EC (embedded micro-controller)
+		 * which is configured through GPIOAO_2 (poweroff GPIO) and
+		 * GPIOAO_7 (power LED, which has to go LOW as well).
+		 */
+		gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		timeout-ms = <20000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "ec100:red:power";
+			/*
+			 * Needs to go LOW (together with the poweroff GPIO)
+			 * during shutdown to allow the EC (embedded
+			 * micro-controller) to shutdown the system. Setting
+			 * the output to LOW signals the EC to start a
+			 * "breathing"/pulsing effect until the power is fully
+			 * turned off.
+			 */
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	rtc32k_xtal: rtc32k-xtal-clk {
+		/* X2 in the schematics */
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "RTC32K";
+		#clock-cells = <0>;
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "M8B-EC100";
+
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-rates = <270950400>,
+				       <294912000>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&rt5640>;
+			};
+		};
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		/*
+		 * Silergy SY6288CCAC-GP 2A Power Distribution Switch.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&vcc_5v>;
+
+		/*
+		 * signal name from the schematics: USB_PWR_EN
+		 */
+		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_5v: regulator-vcc5v {
+		/*
+		 * supplied by the main power input which called PWR_5V_STB
+		 * in the schematics
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC5V";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		/*
+		 * signal name from the schematics: 3V3_5V_EN
+		 */
+		gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcck: regulator-vcck {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 0 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc1v8 {
+		/*
+		 * ABLIC S-1339D18-M5001-GP
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_3v3: regulator-vcc3v3 {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator. Also called
+		 * VDDIO_AO3.3V in the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_ddr3: regulator-vcc-ddr3 {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator. Also called
+		 * DDR3_1.5V in the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_DDR3_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		vin-supply = <&vcc_5v>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_rtc: regulator-vcc-rtc {
+		/*
+		 * Global Mixed-mode Technology Inc. G918T12U-GP
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_RTC";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		/*
+		 * When the board is powered then the input is VCC3V3,
+		 * otherwise power is taken from the coin cell battery.
+		 */
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vddee: regulator-vddee {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator. Also called VDDAO
+		 * in a part of the schematics.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDEE";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 1 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&aiu {
+	status = "okay";
+
+	pinctrl-0 = <&i2s_am_clk_pins>, <&i2s_out_ao_clk_pins>,
+		    <&i2s_out_lr_clk_pins>, <&i2s_out_ch01_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101A/G (0x02430c54) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+
+			icplus,select-interrupt;
+			interrupt-parent = <&gpio_intc>;
+			/* GPIOH_3 */
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+
+	rt5640: codec@1c {
+		compatible = "realtek,rt5640";
+
+		reg = <0x1c>;
+
+		#sound-dai-cells = <0>;
+
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */
+
+		/*
+		 * TODO: realtek,ldo1-en-gpios is connected to GPIO_BSD_EN.
+		 * We currently cannot configure this pin correctly.
+		 * Luckily for us it's in the "right" state by default.
+		 */
+		realtek,in1-differential;
+	};
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	max-frequency = <50000000>;
+
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	no-sdio;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+&gpio_ao {
+	gpio-line-names = "Linux_TX", "Linux_RX",
+			  "SLP_S5_N", "USB2_OC_FLAG#",
+			  "HUB_RST", "USB_PWR_EN",
+			  "I2S_IN", "SLP_S1_N",
+			  "TCK", "TMS", "TDI", "TDO",
+			  "HDMI_CEC", "5640_IRQ",
+			  "MUTE", "S805_TEST#";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOX */
+			  "WIFI_SD_D0", "WIFI_SD_D1", "WIFI_SD_D2",
+			  "WIFI_SD_D3", "BTPCM_DOUT", "BTPCM_DIN",
+			  "BTPCM_SYNC", "BTPCM_CLK", "WIFI_SD_CLK",
+			  "WIFI_SD_CMD", "WIFI_32K", "WIFI_PWREN",
+			  "UART_B_TX", "UART_B_RX", "UART_B_CTS_N",
+			  "UART_B_RTS_N", "BT_EN", "WIFI_WAKE_HOST",
+			  /* Bank GPIOY */
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "",
+			  /* Bank GPIODV */
+			  "VCCK_PWM_C", "I2C_SDA_A", "I2C_SCL_A",
+			  "I2C_SDA_B", "I2C_SCL_B", "VDDEE_PWM_D",
+			  "VDDEE_PWM 3V3_5V_EN",
+			  /* Bank GPIOH */
+			  "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL",
+			  "RMII_IRQ", "RMII_RST#", "RMII_TXD1",
+			  "RMII_TXD0", "AV_select_1", "AV_select_2",
+			  "MCU_Control_S",
+			  /* Bank CARD */
+			  "SD_D1_B", "SD_D0_B", "SD_CLK_8726MX",
+			  "SD_CMD_8726MX", "SD_D3_B", "SD_D2_B",
+			  "CARD_EN_DET (CARD_DET)",
+			  /* Bank BOOT */
+			  "NAND_D0 (EMMC)", "NAND_D1 (EMMC)",
+			  "NAND_D2 (EMMC)", "NAND_D3 (EMMC)",
+			  "NAND_D4 (EMMC)", "NAND_D5 (EMMC)",
+			  "NAND_D6 (EMMC)", "NAND_D7 (EMMC)",
+			  "NAND_CS1 (EMMC)", "NAND_CS2 iNAND_RS1 (EMMC)",
+			  "NAND_nR/B iNAND_CMD (EMMC)", "NAND_ALE (EMMC)",
+			  "NAND_CLE (EMMC)", "nRE_S1 NAND_nRE (EMMC)",
+			  "nWE_S1 NAND_nWE (EMMC)",  "", "", "", "SPI_CS",
+			  /* Bank DIF */
+			  "RMII_RXD1", "RMII_RXD0", "RMII_CRS_DV",
+			  "RMII_50M_IN", "GPIODIF_4", "GPIODIF_5",
+			  "RMII_TXEN", "CPUETH_25MOUT", "RMII_MDC",
+			  "RMII_MDIO";
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
+	pinctrl-names = "default";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&rtc32k_xtal>;
+	vdd-supply = <&vcc_rtc>;
+};
+
+/* exposed through the pin headers labeled "URDUG1" on the top of the PCB */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/*
+ * connected to the Bluetooth part of the RTL8723BS SDIO wifi / Bluetooth
+ * combo chip. This is only available on the variant with 2GB RAM.
+ */
+&uart_B {
+	status = "okay";
+	pinctrl-0 = <&uart_b0_pins>, <&uart_b0_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&usb1 {
+	status = "okay";
+	vbus-supply = <&usb_vbus>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8b-mxq.dts b/arch/arm/boot/dts/amlogic/meson8b-mxq.dts
new file mode 100644
index 000000000000..0bca0b33eea2
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8b-mxq.dts
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "meson8b.dtsi"
+
+/ {
+	model = "TRONFY MXQ S805";
+	compatible = "tronfy,mxq", "amlogic,meson8b";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	vcck: regulator-vcck {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 0 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_5v: regulator-vcc5v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddee: regulator-vddee {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDEE";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 1 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101A/G (0x02430c54) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+
+			icplus,select-interrupt;
+			interrupt-parent = <&gpio_intc>;
+			/* GPIOH_3 */
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
+	pinctrl-names = "default";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
new file mode 100644
index 000000000000..1cd2093202ca
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+#include "meson8b.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Hardkernel ODROID-C1";
+	compatible = "hardkernel,odroid-c1", "amlogic,meson8b";
+
+	aliases {
+		serial0 = &uart_AO;
+		mmc0 = &sd_card_slot;
+		mmc1 = &sdhc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-blue {
+			label = "c1:blue:alive";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	p5v0: regulator-p5v0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "P5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		/*
+		 * signal name from schematics: TFLASH_VDD_EN
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vcc_3v3>;
+
+		gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	tf_io: gpio-regulator-tf_io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vcc_3v3>;
+
+		/*
+		 * signal name from schematics: TF_3V3N_1V8_EN
+		 */
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0
+			  1800000 1>;
+	};
+
+	rtc32k_xtal: rtc32k-xtal-clk {
+		/* X3 in the schematics */
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "RTC32K";
+		#clock-cells = <0>;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		/*
+		 * RICHTEK RT9179 configured for a fixed output voltage of
+		 * 1.8V. This supplies not only VCC1V8 but also IOREF_1V8 and
+		 * VDD1V8 according to the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&p5v0>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		/*
+		 * Monolithic Power Systems MP2161 configured for a fixed
+		 * output voltage of 3.3V. This supplies not only VCC3V3 but
+		 * also VDD3V3 and VDDIO_AO3V3 according to the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&p5v0>;
+	};
+
+	vcck: regulator-vcck {
+		/* Monolithic Power Systems MP2161 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&p5v0>;
+
+		pwms = <&pwm_cd 0 12218 0>;
+		pwm-dutycycle-range = <91 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddc_ddr: regulator-vddc-ddr {
+		/*
+		 * Monolithic Power Systems MP2161 configured for a fixed
+		 * output voltage of 1.5V. This supplies not only DDR_VDDC but
+		 * also DDR3_1V5 according to the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "DDR_VDDC";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		vin-supply = <&p5v0>;
+	};
+
+	vddee: regulator-vddee {
+		/* Monolithic Power Systems MP2161 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDEE";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&p5v0>;
+
+		pwms = <&pwm_cd 1 12218 0>;
+		pwm-dutycycle-range = <91 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vdd_rtc: regulator-vdd-rtc {
+		/*
+		 * Torex Semiconductor XC6215 configured for a fixed output of
+		 * 0.9V.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_RTC";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&vcc_3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&efuse {
+	ethernet_mac_address: mac@1b4 {
+		reg = <0x1b4 0x6>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy>;
+	phy-mode = "rgmii-id";
+
+	nvmem-cells = <&ethernet_mac_address>;
+	nvmem-cell-names = "mac-address";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Realtek RTL8211F (0x001cc916) */
+		eth_phy: ethernet-phy@0 {
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+
+			interrupt-parent = <&gpio_intc>;
+			/* GPIOH_3 */
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOX */
+			  "J2 Header Pin 35", "J2 Header Pin 36",
+			  "J2 Header Pin 32", "J2 Header Pin 31",
+			  "J2 Header Pin 29", "J2 Header Pin 18",
+			  "J2 Header Pin 22", "J2 Header Pin 16",
+			  "J2 Header Pin 23", "J2 Header Pin 21",
+			  "J2 Header Pin 19", "J2 Header Pin 33",
+			  "J2 Header Pin 8", "J2 Header Pin 10",
+			  "J2 Header Pin 15", "J2 Header Pin 13",
+			  "J2 Header Pin 24", "J2 Header Pin 26",
+			  /* Bank GPIOY */
+			  "Revision (upper)", "Revision (lower)",
+			  "J2 Header Pin 7", "", "J2 Header Pin 12",
+			  "J2 Header Pin 11", "", "", "",
+			  "TFLASH_VDD_EN", "", "",
+			  /* Bank GPIODV */
+			  "VCCK_PWM (PWM_C)", "I2CA_SDA", "I2CA_SCL",
+			  "I2CB_SDA", "I2CB_SCL", "VDDEE_PWM (PWM_D)",
+			  "",
+			  /* Bank GPIOH */
+			  "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL",
+			  "ETH_PHY_INTR", "ETH_PHY_NRST", "ETH_TXD1",
+			  "ETH_TXD0", "ETH_TXD3", "ETH_TXD2",
+			  "ETH_RGMII_TX_CLK",
+			  /* Bank CARD */
+			  "SD_DATA1 (SDB_D1)", "SD_DATA0 (SDB_D0)",
+			  "SD_CLK",  "SD_CMD", "SD_DATA3 (SDB_D3)",
+			  "SD_DATA2 (SDB_D2)", "SD_CDN (SD_DET_N)",
+			  /* Bank BOOT */
+			  "SDC_D0 (EMMC)", "SDC_D1 (EMMC)",
+			  "SDC_D2 (EMMC)", "SDC_D3 (EMMC)",
+			  "SDC_D4 (EMMC)", "SDC_D5 (EMMC)",
+			  "SDC_D6 (EMMC)", "SDC_D7 (EMMC)",
+			  "SDC_CLK (EMMC)", "SDC_RSTn (EMMC)",
+			  "SDC_CMD (EMMC)", "BOOT_SEL", "", "", "",
+			  "", "", "", "",
+			  /* Bank DIF */
+			  "ETH_RXD1", "ETH_RXD0", "ETH_RX_DV",
+			  "RGMII_RX_CLK", "ETH_RXD3", "ETH_RXD2",
+			  "ETH_TXEN", "ETH_PHY_REF_CLK_25MOUT",
+			  "ETH_MDC", "ETH_MDIO";
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX", "UART RX", "",
+			  "TF_3V3N_1V8_EN", "USB_HUB_RST_N",
+			  "USB_OTG_PWREN", "J7 Header Pin 2",
+			  "IR_IN", "J7 Header Pin 4",
+			  "J7 Header Pin 6", "J7 Header Pin 5",
+			  "J7 Header Pin 7", "HDMI_CEC",
+			  "SYS_LED", "", "";
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	max-frequency = <100000000>;
+
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sdio;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&tflash_vdd>;
+		vqmmc-supply = <&tf_io>;
+	};
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
+	pinctrl-names = "default";
+};
+
+&rtc {
+	/* needs to be enabled manually when a battery is connected */
+	clocks = <&rtc32k_xtal>;
+	vdd-supply = <&vdd_rtc>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub@1 {
+		/* Genesys Logic GL852G usb hub */
+		compatible = "usb5e3,610";
+		reg = <1>;
+		vdd-supply = <&p5v0>;
+		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8b.dtsi b/arch/arm/boot/dts/amlogic/meson8b.dtsi
new file mode 100644
index 000000000000..2d77b9876bf4
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8b.dtsi
@@ -0,0 +1,790 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
+#include <dt-bindings/clock/meson8b-clkc.h>
+#include <dt-bindings/gpio/meson8b-gpio.h>
+#include <dt-bindings/power/meson8-power.h>
+#include <dt-bindings/reset/amlogic,meson8b-reset.h>
+#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "meson.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x200>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x201>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu2: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x202>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu3: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x203>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-96000000 {
+			opp-hz = /bits/ 64 <96000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-192000000 {
+			opp-hz = /bits/ 64 <192000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1320000000 {
+			opp-hz = /bits/ 64 <1320000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1488000000 {
+			opp-hz = /bits/ 64 <1488000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-microvolt = <1140000>;
+		};
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-255000000 {
+			opp-hz = /bits/ 64 <255000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-364285714 {
+			opp-hz = /bits/ 64 <364285714>;
+			opp-microvolt = <1100000>;
+		};
+		opp-425000000 {
+			opp-hz = /bits/ 64 <425000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-510000000 {
+			opp-hz = /bits/ 64 <510000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-637500000 {
+			opp-hz = /bits/ 64 <637500000>;
+			opp-microvolt = <1100000>;
+			turbo-mode;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* 2 MiB reserved for Hardware ROM Firmware? */
+		hwrom@0 {
+			reg = <0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	thermal-zones {
+		soc-thermal {
+			polling-delay-passive = <250>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&thermal_sensor>;
+
+			cooling-maps {
+				map0 {
+					trip = <&soc_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&soc_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				soc_passive: soc-passive {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				soc_hot: soc-hot {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				soc_critical: soc-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	mmcbus: bus@c8000000 {
+		compatible = "simple-bus";
+		reg = <0xc8000000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xc8000000 0x8000>;
+
+		ddr_clkc: clock-controller@400 {
+			compatible = "amlogic,meson8b-ddr-clkc";
+			reg = <0x400 0x20>;
+			clocks = <&xtal>;
+			clock-names = "xtal";
+			#clock-cells = <1>;
+		};
+
+		dmcbus: bus@6000 {
+			compatible = "simple-bus";
+			reg = <0x6000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x400>;
+
+			canvas: video-lut@48 {
+				compatible = "amlogic,meson8b-canvas",
+					     "amlogic,canvas";
+				reg = <0x48 0x14>;
+			};
+		};
+	};
+
+	apb: bus@d0000000 {
+		compatible = "simple-bus";
+		reg = <0xd0000000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xd0000000 0x200000>;
+
+		mali: gpu@c0000 {
+			compatible = "amlogic,meson8b-mali", "arm,mali-450";
+			reg = <0xc0000 0x40000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp", "gpmmu", "pp", "pmu",
+					  "pp0", "ppmmu0", "pp1", "ppmmu1";
+			resets = <&reset RESET_MALI>;
+			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+			clock-names = "bus", "core";
+			operating-points-v2 = <&gpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+}; /* end of / */
+
+&aiu {
+	compatible = "amlogic,aiu-meson8b", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
+&aobus {
+	pmu: pmu@e0 {
+		compatible = "amlogic,meson8b-pmu", "syscon";
+		reg = <0xe0 0x18>;
+	};
+
+	pinctrl_aobus: pinctrl@14 {
+		compatible = "amlogic,meson8b-aobus-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x14 0x1c>;
+
+		gpio_ao: bank@0 {
+			reg = <0x0 0x4>,
+			      <0x18 0x4>,
+			      <0x10 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 16>;
+		};
+
+		i2s_am_clk_pins: i2s-am-clk-out {
+			mux {
+				groups = "i2s_am_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s-ao-clk-out {
+			mux {
+				groups = "i2s_ao_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s-lr-clk-out {
+			mux {
+				groups = "i2s_lr_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_ao_pins: i2s-out-ch01 {
+			mux {
+				groups = "i2s_out_01";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		spdif_out_1_pins: spdif-out-1 {
+			mux {
+				groups = "spdif_out_1";
+				function = "spdif_1";
+				bias-disable;
+			};
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+				bias-pull-up;
+			};
+		};
+
+		ir_recv_pins: remote {
+			mux {
+				groups = "remote_input";
+				function = "remote";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ao_arc_rproc {
+	compatible = "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
+	amlogic,secbus2 = <&secbus2>;
+	sram = <&ao_arc_sram>;
+	resets = <&reset RESET_MEDIA_CPU>;
+	clocks = <&clkc CLKID_AO_MEDIA_CPU>;
+};
+
+&cbus {
+	reset: reset-controller@4404 {
+		compatible = "amlogic,meson8b-reset";
+		reg = <0x4404 0x9c>;
+		#reset-cells = <1>;
+	};
+
+	analog_top: analog-top@81a8 {
+		compatible = "amlogic,meson8b-analog-top", "syscon";
+		reg = <0x81a8 0x14>;
+	};
+
+	pwm_ef: pwm@86c0 {
+		compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
+		reg = <0x86c0 0x10>;
+		clocks = <&xtal>,
+			 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+			 <&clkc CLKID_FCLK_DIV4>,
+			 <&clkc CLKID_FCLK_DIV3>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	clock-measure@8758 {
+		compatible = "amlogic,meson8b-clk-measure";
+		reg = <0x8758 0x1c>;
+	};
+
+	pinctrl_cbus: pinctrl@8030 {
+		compatible = "amlogic,meson8b-cbus-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x8030 0x108>;
+
+		gpio: bank@80 {
+			reg = <0x80 0x28>,
+			      <0xb8 0x18>,
+			      <0xf0 0x18>,
+			      <0x00 0x38>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_cbus 0 0 83>;
+		};
+
+		eth_rgmii_pins: eth-rgmii {
+			mux {
+				groups = "eth_tx_clk",
+					 "eth_tx_en",
+					 "eth_txd1_0",
+					 "eth_txd0_0",
+					 "eth_rx_clk",
+					 "eth_rx_dv",
+					 "eth_rxd1",
+					 "eth_rxd0",
+					 "eth_mdio_en",
+					 "eth_mdc",
+					 "eth_ref_clk",
+					 "eth_txd2",
+					 "eth_txd3",
+					 "eth_rxd3",
+					 "eth_rxd2";
+				function = "ethernet";
+				bias-disable;
+			};
+		};
+
+		eth_rmii_pins: eth-rmii {
+			mux {
+				groups = "eth_tx_en",
+					 "eth_txd1_0",
+					 "eth_txd0_0",
+					 "eth_rx_clk",
+					 "eth_rx_dv",
+					 "eth_rxd1",
+					 "eth_rxd0",
+					 "eth_mdio_en",
+					 "eth_mdc";
+				function = "ethernet";
+				bias-disable;
+			};
+		};
+
+		i2c_a_pins: i2c-a {
+			mux {
+				groups = "i2c_sda_a", "i2c_sck_a";
+				function = "i2c_a";
+				bias-disable;
+			};
+		};
+
+		sd_b_pins: sd-b {
+			mux {
+				groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
+					"sd_d3_b", "sd_clk_b", "sd_cmd_b";
+				function = "sd_b";
+				bias-disable;
+			};
+		};
+
+		sdxc_c_pins: sdxc-c {
+			mux {
+				groups = "sdxc_d0_c", "sdxc_d13_c",
+					 "sdxc_d47_c", "sdxc_clk_c",
+					 "sdxc_cmd_c";
+				function = "sdxc_c";
+				bias-pull-up;
+			};
+		};
+
+		pwm_c1_pins: pwm-c1 {
+			mux {
+				groups = "pwm_c1";
+				function = "pwm_c";
+				bias-disable;
+			};
+		};
+
+		pwm_d_pins: pwm-d {
+			mux {
+				groups = "pwm_d";
+				function = "pwm_d";
+				bias-disable;
+			};
+		};
+
+		uart_b0_pins: uart-b0 {
+			mux {
+				groups = "uart_tx_b0",
+				       "uart_rx_b0";
+				function = "uart_b";
+				bias-pull-up;
+			};
+		};
+
+		uart_b0_cts_rts_pins: uart-b0-cts-rts {
+			mux {
+				groups = "uart_cts_b0",
+				       "uart_rts_b0";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ahb_sram {
+	ao_arc_sram: aoarc-sram@0 {
+		compatible = "amlogic,meson8b-ao-arc-sram";
+		reg = <0x0 0x8000>;
+		pool;
+	};
+
+	smp-sram@1ff80 {
+		compatible = "amlogic,meson8b-smp-sram";
+		reg = <0x1ff80 0x8>;
+	};
+};
+
+
+&efuse {
+	compatible = "amlogic,meson8b-efuse";
+	clocks = <&clkc CLKID_EFUSE>;
+	clock-names = "core";
+
+	temperature_calib: calib@1f4 {
+		/* only the upper two bytes are relevant */
+		reg = <0x1f4 0x4>;
+	};
+};
+
+&ethmac {
+	compatible = "amlogic,meson8b-dwmac", "snps,dwmac-3.70a", "snps,dwmac";
+
+	reg = <0xc9410000 0x10000
+	       0xc1108140 0x4>;
+
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+	rx-fifo-depth = <4096>;
+	tx-fifo-depth = <2048>;
+
+	resets = <&reset RESET_ETHERNET>;
+	reset-names = "stmmaceth";
+
+	power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson8b-gpio-intc",
+		     "amlogic,meson-gpio-intc";
+	status = "okay";
+};
+
+&hhi {
+	clkc: clock-controller {
+		compatible = "amlogic,meson8b-clkc";
+		clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+		clock-names = "xtal", "ddr_pll";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pwrc: power-controller {
+		compatible = "amlogic,meson8b-pwrc";
+		#power-domain-cells = <1>;
+		amlogic,ao-sysctrl = <&pmu>;
+		resets = <&reset RESET_DBLK>,
+			 <&reset RESET_PIC_DC>,
+			 <&reset RESET_HDMI_APB>,
+			 <&reset RESET_HDMI_SYSTEM_RESET>,
+			 <&reset RESET_VENCI>,
+			 <&reset RESET_VENCP>,
+			 <&reset RESET_VDAC_4>,
+			 <&reset RESET_VENCL>,
+			 <&reset RESET_VIU>,
+			 <&reset RESET_VENC>,
+			 <&reset RESET_RDMA>;
+		reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system",
+			      "venci", "vencp", "vdac", "vencl", "viu",
+			      "venc", "rdma";
+		clocks = <&clkc CLKID_VPU>;
+		clock-names = "vpu";
+		assigned-clocks = <&clkc CLKID_VPU>;
+		assigned-clock-rates = <182142857>;
+	};
+};
+
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&L2 {
+	arm,data-latency = <3 3 3>;
+	arm,tag-latency = <2 2 2>;
+	arm,filter-ranges = <0x100000 0xc0000000>;
+	prefetch-data = <1>;
+	prefetch-instr = <1>;
+	arm,prefetch-offset = <7>;
+	arm,double-linefill = <1>;
+	arm,prefetch-drop = <1>;
+	arm,shared-override;
+};
+
+&periph {
+	scu@0 {
+		compatible = "arm,cortex-a5-scu";
+		reg = <0x0 0x100>;
+	};
+
+	timer@200 {
+		compatible = "arm,cortex-a5-global-timer";
+		reg = <0x200 0x20>;
+		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+
+		/*
+		 * the arm_global_timer driver currently does not handle clock
+		 * rate changes. Keep it disabled for now.
+		 */
+		status = "disabled";
+	};
+
+	timer@600 {
+		compatible = "arm,cortex-a5-twd-timer";
+		reg = <0x600 0x20>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+	};
+};
+
+&pwm_ab {
+	compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_cd {
+	compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&rtc {
+	compatible = "amlogic,meson8b-rtc";
+	resets = <&reset RESET_RTC>;
+};
+
+&saradc {
+	compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
+	clock-names = "clkin", "core";
+	amlogic,hhi-sysctrl = <&hhi>;
+	nvmem-cells = <&temperature_calib>;
+	nvmem-cell-names = "temperature_calib";
+};
+
+&sdhc {
+	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV5>,
+		 <&clkc CLKID_SDHC>;
+	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+};
+
+&secbus {
+	secbus2: system-controller@4000 {
+		compatible = "amlogic,meson8b-secbus2", "syscon";
+		reg = <0x4000 0x2000>;
+	};
+};
+
+&sdio {
+	compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
+	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+	clock-names = "core", "clkin";
+};
+
+&timer_abcde {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk";
+};
+
+&uart_AO {
+	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_A {
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&usb0 {
+	compatible = "amlogic,meson8b-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb1 {
+	compatible = "amlogic,meson8b-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb0_phy {
+	compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
+
+&usb1_phy {
+	compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
+
+&wdt {
+	compatible = "amlogic,meson8b-wdt";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts
new file mode 100644
index 000000000000..08aa661e17ad
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Oleg Ivanov <balbes-150@yandex.ru>
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+/dts-v1/;
+
+#include "meson8m2.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Tronsmart MXIII Plus";
+	compatible = "tronsmart,mxiii-plus", "amlogic,meson8m2";
+
+	aliases {
+		ethernet0 = &ethmac;
+		i2c0 = &i2c_AO;
+		serial0 = &uart_AO;
+		mmc0 = &sd_card_slot;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		pinctrl-0 = <&xtal_32k_out_pins>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>,
+			      <&gpio_ao GPIOAO_6 GPIO_ACTIVE_LOW>;
+
+		clocks = <&xtal_32k_out>;
+		clock-names = "ext_clock";
+	};
+
+	vcc_3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	xtal_32k_out: xtal-32k-out-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32k_out";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii-id";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_pins>;
+	pinctrl-names = "default";
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+		system-power-controller;
+
+		regulators {
+			vcck: DCDC1 {
+				regulator-name = "VCCK";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddee: DCDC2 {
+				/* the output is also used as VDDAO */
+				regulator-name = "VDD_EE";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			DCDC3 {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "VDDIO_AO28";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddio_ao1v8: LDO2 {
+				regulator-name = "VDDIO_AO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO3 {
+				regulator-name = "VCC1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "VCC2V8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO5 {
+				regulator-name = "AVDD1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC1 {
+				regulator-name = "VDD_LDO";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC2 {
+				regulator-name = "RTC_0V9";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO wifi */
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_a_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	disable-wp;
+	non-removable;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+/* connected to the Bluetooth module */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm20702a1";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8m2.dtsi b/arch/arm/boot/dts/amlogic/meson8m2.dtsi
new file mode 100644
index 000000000000..6725dd9fd825
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8m2.dtsi
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+#include "meson8.dtsi"
+
+/ {
+	model = "Amlogic Meson8m2 SoC";
+	compatible = "amlogic,meson8m2";
+}; /* end of / */
+
+&clkc {
+	compatible = "amlogic,meson8m2-clkc", "amlogic,meson8-clkc";
+};
+
+&dmcbus {
+	/* the offset of the canvas registers has changed compared to Meson8 */
+	/delete-node/ video-lut@20;
+
+	canvas: video-lut@48 {
+		compatible = "amlogic,meson8m2-canvas", "amlogic,canvas";
+		reg = <0x48 0x14>;
+	};
+};
+
+&ethmac {
+	compatible = "amlogic,meson8m2-dwmac", "snps,dwmac";
+	reg = <0xc9410000 0x10000
+		0xc1108140 0x8>;
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+	resets = <&reset RESET_ETHERNET>;
+	reset-names = "stmmaceth";
+};
+
+&pinctrl_aobus {
+	compatible = "amlogic,meson8m2-aobus-pinctrl",
+		     "amlogic,meson8-aobus-pinctrl";
+};
+
+&pinctrl_cbus {
+	compatible = "amlogic,meson8m2-cbus-pinctrl",
+		     "amlogic,meson8-cbus-pinctrl";
+
+	eth_rgmii_pins: ethernet {
+		mux {
+			groups = "eth_tx_clk_50m", "eth_tx_en",
+				 "eth_txd3", "eth_txd2",
+				 "eth_txd1", "eth_txd0",
+				 "eth_rx_clk_in", "eth_rx_dv",
+				 "eth_rxd3", "eth_rxd2",
+				 "eth_rxd1", "eth_rxd0",
+				 "eth_mdio", "eth_mdc";
+			function = "ethernet";
+			bias-disable;
+		};
+	};
+};
+
+&pwrc {
+	compatible = "amlogic,meson8m2-pwrc";
+	resets = <&reset RESET_DBLK>,
+		 <&reset RESET_PIC_DC>,
+		 <&reset RESET_HDMI_APB>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_VENCI>,
+		 <&reset RESET_VENCP>,
+		 <&reset RESET_VDAC_4>,
+		 <&reset RESET_VENCL>,
+		 <&reset RESET_VIU>,
+		 <&reset RESET_VENC>,
+		 <&reset RESET_RDMA>;
+	reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system", "venci",
+		      "vencp", "vdac", "vencl", "viu", "venc", "rdma";
+	assigned-clocks = <&clkc CLKID_VPU>;
+	assigned-clock-rates = <364000000>;
+};
+
+&saradc {
+	compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc";
+};
+
+&sdhc {
+	compatible = "amlogic,meson8m2-sdhc", "amlogic,meson-mx-sdhc";
+};
+
+&usb0_phy {
+	compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy";
+};
+
+&usb1_phy {
+	compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy";
+};
+
+&wdt {
+	compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt";
+};
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
deleted file mode 100644
index 4e0ad3b82796..000000000000
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
- *
- *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 only.
- */
-
-/dts-v1/;
-#include "at91sam9260.dtsi"
-
-/ {
-	model = "Somfy Animeo IP";
-	compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";
-
-	aliases {
-		serial0 = &usart1;
-		serial1 = &usart2;
-		serial2 = &usart0;
-		serial3 = &dbgu;
-		serial4 = &usart3;
-		serial5 = &uart0;
-		serial6 = &uart1;
-	};
-
-	chosen {
-		linux,stdout-path = &usart2;
-	};
-
-	memory {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			usart0: serial@fffb0000 {
-				pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
-				linux,rs485-enabled-at-boot-time;
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;
-				linux,rs485-enabled-at-boot-time;
-				status = "okay";
-			};
-
-			usart2: serial@fffb8000 {
-				pinctrl-0 = <&pinctrl_usart2>;
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;
-				phy-mode = "mii";
-				status = "okay";
-			};
-
-			mmc0: mmc@fffa8000 {
-				pinctrl-0 = <&pinctrl_mmc0_clk
-					     &pinctrl_mmc0_slot1_cmd_dat0
-					     &pinctrl_mmc0_slot1_dat1_3>;
-				status = "okay";
-
-				slot@1 {
-					reg = <1>;
-					bus-width = <4>;
-				};
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			status = "okay";
-
-			barebox@0 {
-				label = "barebox";
-				reg = <0x0 0x58000>;
-			};
-
-			u_boot_env@58000 {
-				label = "u_boot_env";
-				reg = <0x58000 0x8000>;
-			};
-
-			ubi@60000 {
-				label = "ubi";
-				reg = <0x60000 0x1FA0000>;
-			};
-		};
-
-		usb0: ohci@00500000 {
-			num-ports = <2>;
-			atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power_green {
-			label = "power_green";
-			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		power_red {
-			label = "power_red";
-			gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		tx_green {
-			label = "tx_green";
-			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
-		};
-
-		tx_red {
-			label = "tx_red";
-			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		keyswitch_in {
-			label = "keyswitch_in";
-			gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <28>;
-			gpio-key,wakeup;
-		};
-
-		error_in {
-			label = "error_in";
-			gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
-			linux,code = <29>;
-			gpio-key,wakeup;
-		};
-
-		btn {
-			label = "btn";
-			gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
-			linux,code = <31>;
-			gpio-key,wakeup;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/arm/Makefile b/arch/arm/boot/dts/arm/Makefile
new file mode 100644
index 000000000000..07ebb64e2cd0
--- /dev/null
+++ b/arch/arm/boot/dts/arm/Makefile
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_INTEGRATOR) += \
+	integratorap.dtb \
+	integratorap-im-pd1.dtb \
+	integratorcp.dtb
+dtb-$(CONFIG_ARCH_MPS2) += \
+	mps2-an385.dtb \
+	mps2-an399.dtb
+dtb-$(CONFIG_ARCH_REALVIEW) += \
+	arm-realview-pb1176.dtb \
+	arm-realview-pb11mp.dtb \
+	arm-realview-eb.dtb \
+	arm-realview-eb-bbrevd.dtb \
+	arm-realview-eb-11mp.dtb \
+	arm-realview-eb-11mp-bbrevd.dtb \
+	arm-realview-eb-11mp-ctrevb.dtb \
+	arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
+	arm-realview-eb-a9mp.dtb \
+	arm-realview-eb-a9mp-bbrevd.dtb \
+	arm-realview-pba8.dtb \
+	arm-realview-pbx-a9.dtb
+dtb-$(CONFIG_ARCH_VERSATILE) += \
+	versatile-ab.dtb \
+	versatile-ab-ib2.dtb \
+	versatile-pb.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += \
+	vexpress-v2p-ca5s.dtb \
+	vexpress-v2p-ca9.dtb \
+	vexpress-v2p-ca15-tc1.dtb \
+	vexpress-v2p-ca15_a7.dtb
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd-ctrevb.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd-ctrevb.dts
new file mode 100644
index 000000000000..e18769df9fd9
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd-ctrevb.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp-ctrevb.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/*
+ * This is the EB with the new Revision D baseboard with SMSC9118 ethernet and
+ * the Rev B core tile.
+ */
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Core Tile Rev B";
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd.dts
new file mode 100644
index 000000000000..26b1c69e9f43
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Rev C Core Tile";
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-11mp-ctrevb.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-ctrevb.dts
new file mode 100644
index 000000000000..e68527b0d552
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-ctrevb.dts
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp.dts"
+
+/ {
+	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev B";
+};
+
+/*
+ * The revision B has a distinctly different layout of the syscon, so
+ * append a specific compatible-string.
+ */
+&syscon {
+	compatible = "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon", "simple-mfd";
+};
+
+&intc {
+	reg = <0x10101000 0x1000>,
+	      <0x10100100 0x100>;
+};
+
+&L2 {
+	reg = <0x10102000 0x1000>;
+};
+
+&scu {
+	reg = <0x10100000 0x100>;
+};
+
+&twd_timer {
+	reg = <0x10100600 0x20>;
+};
+
+&twd_wdog {
+	reg = <0x10100620 0x20>;
+};
+
+/*
+ * On revision B, we cannot reach the secondary interrupt
+ * controller, as a result, some peripherals that are dependent
+ * on their IRQ cannot be reached, so disable them.
+ */
+&intc_second {
+	status = "disabled";
+};
+
+&gpio0 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&gpio2 {
+	status = "disabled";
+};
+
+&serial2 {
+	status = "disabled";
+};
+
+&serial3 {
+	status = "disabled";
+};
+
+&ssp {
+	status = "disabled";
+};
+
+&wdog {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-11mp.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp.dts
new file mode 100644
index 000000000000..aac1edd4b227
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-eb-mp.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C Core Tile";
+	arm,hbi = <0x146>;
+
+	/*
+	 * This is the ARM11 MPCore tile (HBI-0146) used with the RealView EB.
+	 * Reference: ARM DUI 0318F
+	 *
+	 * To run this machine with QEMU, specify the following:
+	 * qemu-system-arm -M realview-eb-mpcore -smp cpus=4
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		MP11_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
+
+&pmu {
+	interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-a9mp-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp-bbrevd.dts
new file mode 100644
index 000000000000..42efac7496ef
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp-bbrevd.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-a9mp.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView EB Baseboard Rev D Cortex A9 MPCore";
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-a9mp.dts b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp.dts
new file mode 100644
index 000000000000..967684b3636c
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp.dts
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-eb-mp.dtsi"
+
+/ {
+	model = "ARM RealView EB Cortex A9 MPCore";
+
+	/*
+	 * This is the Cortex A9 MPCore tile used with the
+	 * RealView EB.
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		A9_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
+
+&pmu {
+	interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dts
new file mode 100644
index 000000000000..f533c8b49d97
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/* This derives from the Realview Baseboard, and overlays the new ethernet */
+#include "arm-realview-eb.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D";
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi
new file mode 100644
index 000000000000..7f62aef9ca8a
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/ {
+	/* Introduce a fixed regulator for the new ethernet controller */
+	veth: regulator-veth {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+};
+
+/*
+ * The revision D has a different ethernet controller that the elder boards:
+ * the older board uses LAN91C111 but the new one uses LAN9118.
+ */
+&ethernet {
+	compatible = "smsc,lan9118", "smsc,lan9115";
+	phy-mode = "mii";
+	smsc,irq-active-high;
+	smsc,irq-push-pull;
+	vdd33a-supply = <&veth>;
+	vddvario-supply = <&veth>;
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi
new file mode 100644
index 000000000000..40f7515aa068
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi
@@ -0,0 +1,220 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "arm-realview-eb.dtsi"
+
+/*
+ * This is the common include file for all MPCore variants of the
+ * Evaluation Baseboard, i.e. ARM11MPCore, ARM11MPCore Revision B
+ * and Cortex-A9 MPCore.
+ */
+/ {
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-eb-soc", "simple-bus";
+		regmap = <&syscon>;
+		ranges;
+
+		/* Primary interrupt controller in the test chip */
+		intc: interrupt-controller@1f000100 {
+			compatible = "arm,eb11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x1f001000 0x1000>,
+			      <0x1f000100 0x100>;
+		};
+
+		/* Secondary interrupt controller on the FPGA */
+		intc_second: interrupt-controller@10040000 {
+			compatible = "arm,pl390";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10041000 0x1000>,
+			      <0x10040000 0x100>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		L2: cache-controller {
+			compatible = "arm,l220-cache";
+			reg = <0x1f002000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			/*
+			 * Override default cache size, sets and
+			 * associativity as these may be erroneously set
+			 * up by boot loader(s), probably for safety
+			 * since th outer sync operation can cause the
+			 * cache to hang unless disabled.
+			 */
+			cache-size = <1048576>; // 1MB
+			cache-sets = <4096>;
+			cache-line-size = <32>;
+			arm,shared-override;
+			arm,parity-enable;
+			arm,outer-sync-disable;
+		};
+
+		scu: scu@1f000000 {
+			compatible = "arm,arm11mp-scu";
+			reg = <0x1f000000 0x100>;
+		};
+
+		twd_timer: timer@1f000600 {
+			compatible = "arm,arm11mp-twd-timer";
+			reg = <0x1f000600 0x20>;
+			interrupt-parent = <&intc>;
+			interrupts = <1 13 0xf04>;
+		};
+
+		twd_wdog: watchdog@1f000620 {
+			compatible = "arm,arm11mp-twd-wdt";
+			reg = <0x1f000620 0x20>;
+			interrupt-parent = <&intc>;
+			interrupts = <1 14 0xf04>;
+		};
+
+		/* PMU with one IRQ line per core */
+		pmu: pmu {
+			compatible = "arm,arm11mpcore-pmu";
+			interrupt-parent = <&intc>;
+			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
+
+/*
+ * This adapts all the peripherals to the interrupt routing
+ * to the GIC on the core tile.
+ */
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
+			<0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/*
+ * On revision A, these peripherals does not have their IRQ lines
+ * routed to the core tile, but they can be reached on the secondary
+ * GIC.
+ */
+&gpio0 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&serial3 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&ssp {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&wdog {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb.dts b/arch/arm/boot/dts/arm/arm-realview-eb.dts
new file mode 100644
index 000000000000..15431077f00c
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb.dts
@@ -0,0 +1,166 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "arm-realview-eb.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard";
+	compatible = "arm,realview-eb";
+	arm,hbi = <0x140>;
+
+	/*
+	 * This is the core tile with the CPU and GIC etc for the
+	 * ARM926EJ-S, ARM1136, ARM1176 that does not have L2 cache
+	 * or PMU.
+	 *
+	 * To run this machine with QEMU, specify the following:
+	 * qemu-system-arm -M realview-eb
+	 * Unless specified, QEMU will emulate an ARM926EJ-S core tile.
+	 * Switches -cpu arm1136 or -cpu arm1176 emulates the other
+	 * core tiles.
+	 */
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-eb-soc", "simple-bus";
+		regmap = <&syscon>;
+		ranges;
+
+		intc: interrupt-controller@10040000 {
+			compatible = "arm,pl390";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10041000 0x1000>,
+			      <0x10040000 0x100>;
+		};
+	};
+};
+
+/*
+ * This adapts all the peripherals to the interrupt routing
+ * to the GIC on the core tile.
+ */
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			<0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&charlcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+	interrupt-parent = <&intc>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
new file mode 100644
index 000000000000..16f784da5a55
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
@@ -0,0 +1,444 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "arm,realview-eb";
+
+	chosen { };
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c;
+	};
+
+	memory {
+		device_type = "memory";
+		/* 128 MiB memory @ 0x0 */
+		reg = <0x00000000 0x08000000>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	timclk: clock-1000000 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: clock-pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash0@40000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x40000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	flash1@44000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x44000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	/* SMSC LAN91C111 ethernet with PHY and EEPROM */
+	ethernet: ethernet@4e000000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x4e000000 0x10000>;
+		/*
+		 * This means the adapter can be accessed with 8, 16 or
+		 * 32 bit reads/writes.
+		 */
+		reg-io-width = <7>;
+	};
+
+	usb: usb@4f000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x4f000000 0x20000>;
+		dr_mode = "peripheral";
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	/* These peripherals are inside the FPGA */
+	fpga {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		syscon: syscon@10000000 {
+			compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@8,0 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@8,1 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@8,2 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@8,3 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				default-state = "off";
+			};
+			led@8,4 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				default-state = "off";
+			};
+			led@8,5 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				default-state = "off";
+			};
+			led@8,6 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@8,7 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+			oscclk0: clock-controller@c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: clock-controller@10 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: clock-controller@14 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: clock-controller@18 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: clock-controller@1c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		i2c: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mmc: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		charlcd: fpga_charlcd: charlcd@10008000 {
+			compatible = "arm,versatile-lcd";
+			reg = <0x10008000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		serial0: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial1: serial@1000a000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000a000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial2: serial@1000b000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000b000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial3: serial@1000c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000c000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		ssp: spi@1000d000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1000d000 0x1000>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+
+		wdog: watchdog@10010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x10010000 0x1000>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer01: timer@10011000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10011000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer23: timer@10012000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10012000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		gpio0: gpio@10013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10013000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		clcd: clcd@10020000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10020000 0x1000>;
+			interrupt-names = "combined";
+			clocks = <&oscclk0>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
new file mode 100644
index 000000000000..b9b10cbd65aa
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
@@ -0,0 +1,576 @@
+/*
+ * Copyright 2014 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "ARM RealView PB1176";
+	compatible = "arm,realview-pb1176";
+
+	chosen { };
+
+	aliases {
+		serial0 = &pb1176_serial0;
+		serial1 = &pb1176_serial1;
+		serial2 = &pb1176_serial2;
+		serial3 = &pb1176_serial3;
+		serial4 = &fpga_serial;
+	};
+
+	memory {
+		device_type = "memory";
+		/* 128 MiB memory @ 0x0 */
+		reg = <0x00000000 0x08000000>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	veth: regulator-veth {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: clock-24000000 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	timclk: clock-1000000 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: clock-pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash@30000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x30000000 0x4000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	fpga_flash@38000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x38000000 0x800000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	/*
+	 * The "secure flash" contains things like the boot
+	 * monitor so we don't want people to accidentally
+	 * screw this up. Mark the device tree node disabled
+	 * by default.
+	 */
+	secflash@3c000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x3c000000 0x4000000>;
+		bank-width = <4>;
+		status = "disabled";
+	};
+
+	/* SMSC 9118 ethernet with PHY and EEPROM */
+	ethernet@3a000000 {
+		compatible = "smsc,lan9118", "smsc,lan9115";
+		reg = <0x3a000000 0x10000>;
+		interrupt-parent = <&intc_fpga1176>;
+		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&veth>;
+		vddvario-supply = <&veth>;
+	};
+
+	usb@3b000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x3b000000 0x20000>;
+		interrupt-parent = <&intc_fpga1176>;
+		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+		dr_mode = "peripheral";
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-pb1176-soc", "simple-bus";
+		regmap = <&syscon>;
+		ranges;
+
+		syscon: syscon@10000000 {
+			compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@8,0 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@8,1 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@8,2 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@8,3 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				default-state = "off";
+			};
+			led@8,4 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				default-state = "off";
+			};
+			led@8,5 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				default-state = "off";
+			};
+			led@8,6 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@8,7 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+			oscclk0: clock-controller@c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: clock-controller@10 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: clock-controller@14 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: clock-controller@18 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: clock-controller@1c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		/* Primary DevChip GIC synthesized with the CPU */
+		intc_dc1176: interrupt-controller@10120000 {
+			compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10121000 0x1000>,
+			      <0x10120000 0x100>;
+		};
+
+		L2: cache-controller {
+			compatible = "arm,l220-cache";
+			reg = <0x10110000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			/*
+			 * Override default cache size, sets and
+			 * associativity as these may be erroneously set
+			 * up by boot loader(s).
+			 */
+			arm,override-auxreg;
+			cache-size = <131072>; // 128kB
+			cache-sets = <512>;
+			cache-line-size = <32>;
+		};
+
+		pmu {
+			compatible = "arm,arm1176-pmu";
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer01: timer@10104000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10104000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer23: timer@10105000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10105000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+			arm,sp804-has-irq = <1>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		pb1176_rtc: rtc@10108000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10108000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		pb1176_gpio0: gpio@1010a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x1010a000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		pb1176_ssp: spi@1010b000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1010b000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+
+		pb1176_serial0: serial@1010c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010c000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb1176_serial1: serial@1010d000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010d000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb1176_serial2: serial@1010e000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010e000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb1176_serial3: serial@1010f000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010f000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		/* Direct-mapped development chip ROM */
+		pb1176_rom@10200000 {
+			compatible = "mtd-rom";
+			reg = <0x10200000 0x4000>;
+			bank-width = <1>;
+		};
+
+		clcd@10112000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10112000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupt-names = "combined";
+			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&oscclk0>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+	};
+
+	/* These peripherals are inside the FPGA rather than the DevChip */
+	fpga {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		i2c0: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		fpga_aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_mci: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>,
+					<0 2 IRQ_TYPE_LEVEL_HIGH>;
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&fpga_gpio1 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&fpga_gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		fpga_kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		fpga_kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		fpga_charlcd: charlcd@10008000 {
+			compatible = "arm,versatile-lcd";
+			reg = <0x10008000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_serial: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		/* This GIC on the board is cascaded off the DevChip GIC */
+		intc_fpga1176: interrupt-controller@10040000 {
+			compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10041000 0x1000>,
+			      <0x10040000 0x100>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		fpga_gpio0: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_gpio1: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
new file mode 100644
index 000000000000..db1b6793cd2c
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
@@ -0,0 +1,696 @@
+/*
+ * Copyright 2015 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "ARM RealView PB11MPcore";
+	compatible = "arm,realview-pb11mp";
+
+	chosen { };
+
+	aliases {
+		serial0 = &pb11mp_serial0;
+		serial1 = &pb11mp_serial1;
+		serial2 = &pb11mp_serial2;
+		serial3 = &pb11mp_serial3;
+	};
+
+	memory {
+		device_type = "memory";
+		/*
+		 * The PB11MPCore has 512 MiB memory @ 0x70000000
+		 * and the first 256 are also remapped @ 0x00000000
+		 */
+		reg = <0x70000000 0x20000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		MP11_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	/* Primary TestChip GIC synthesized with the CPU */
+	intc_tc11mp: interrupt-controller@1f000100 {
+		compatible = "arm,tc11mp-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x1f001000 0x1000>,
+		      <0x1f000100 0x100>;
+	};
+
+	L2: cache-controller@1f002000 {
+		compatible = "arm,l220-cache";
+		reg = <0x1f002000 0x1000>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		cache-unified;
+		cache-level = <2>;
+		/*
+		 * Override default cache size, sets and
+		 * associativity as these may be erroneously set
+		 * up by boot loader(s), probably for safety
+		 * since th outer sync operation can cause the
+		 * cache to hang unless disabled.
+		 */
+		cache-size = <1048576>; // 1MB
+		cache-sets = <4096>;
+		cache-line-size = <32>;
+		arm,shared-override;
+		arm,parity-enable;
+		arm,outer-sync-disable;
+	};
+
+	scu@1f000000 {
+		compatible = "arm,arm11mp-scu";
+		reg = <0x1f000000 0x100>;
+	};
+
+	timer@1f000600 {
+		compatible = "arm,arm11mp-twd-timer";
+		reg = <0x1f000600 0x20>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	watchdog@1f000620 {
+		compatible = "arm,arm11mp-twd-wdt";
+		reg = <0x1f000620 0x20>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <1 14 0xf04>;
+	};
+
+	/* PMU with one IRQ line per core */
+	pmu {
+		compatible = "arm,arm11mpcore-pmu";
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	veth: regulator-veth {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	refclk32khz: clock-32768 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	timclk: clock-1000000 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: clock-pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash0@40000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x40000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	flash1@44000000 {
+		// 2 * 32MiB NOR Flash memory
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x44000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		/*
+		 * This DDC I2C is connected directly to the DVI portions
+		 * of the connector, so it's not really working when the
+		 * monitor is connected to the VGA connector.
+		 */
+		compatible = "vga-connector";
+		ddc-i2c-bus = <&i2c1>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-pb11mp-soc", "simple-bus";
+		regmap = <&pb11mp_syscon>;
+		ranges;
+
+		pb11mp_syscon: syscon@10000000 {
+			compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@8,0 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@8,1 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@8,2 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@8,3 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				linux,default-trigger = "cpu1";
+				default-state = "off";
+			};
+			led@8,4 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				linux,default-trigger = "cpu2";
+				default-state = "off";
+			};
+			led@8,5 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				linux,default-trigger = "cpu3";
+				default-state = "off";
+			};
+			led@8,6 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@8,7 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+
+			oscclk0: clock-controller@c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: clock-controller@10 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: clock-controller@14 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: clock-controller@18 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: clock-controller@1c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk5: clock-controller@d4 {
+				compatible = "arm,syscon-icst307";
+				reg = <0xd4 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0xd4>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk6: clock-controller@d8 {
+				compatible = "arm,syscon-icst307";
+				reg = <0xd8 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0xd8>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		sp810_syscon: sysctl@10001000 {
+			compatible = "arm,sp810", "arm,primecell";
+			reg = <0x10001000 0x1000>;
+			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+			clock-names = "refclk", "timclk", "apb_pclk";
+			#clock-cells = <1>;
+			clock-output-names = "timerclk0",
+					     "timerclk1",
+					     "timerclk2",
+					     "timerclk3";
+			assigned-clocks = <&sp810_syscon 0>,
+					  <&sp810_syscon 1>,
+					  <&sp810_syscon 2>,
+					  <&sp810_syscon 3>;
+			assigned-clock-parents = <&timclk>,
+					       <&timclk>,
+					       <&timclk>,
+					       <&timclk>;
+		};
+
+		i2c0: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mci: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
+					<0 15 IRQ_TYPE_LEVEL_HIGH>;
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		pb11mp_serial0: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial1: serial@1000a000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000a000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial2: serial@1000b000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000b000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial3: serial@1000c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000c000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		spi@1000d000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1000d000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+
+		watchdog@1000f000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x1000f000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		watchdog@10010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x10010000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		timer01: timer@10011000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10011000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+			arm,sp804-has-irq = <1>;
+			clocks = <&sp810_syscon 0>,
+			         <&sp810_syscon 1>,
+				 <&pclk>;
+			clock-names = "timer0clk",
+				    "timer1clk",
+				    "apb_pclk";
+		};
+
+		timer23: timer@10012000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10012000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+			arm,sp804-has-irq = <1>;
+			clocks = <&sp810_syscon 2>,
+			         <&sp810_syscon 3>,
+				 <&pclk>;
+			clock-names = "timer0clk",
+				    "timer1clk",
+				    "apb_pclk";
+		};
+
+		gpio0: gpio@10013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10013000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		i2c1: i2c@10016000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10016000 0x1000>;
+		};
+
+		rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		timer45: timer@10018000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10018000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer67: timer@10019000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10019000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+
+		clcd@10020000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10020000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupt-names = "combined";
+			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&oscclk4>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+
+		/*
+		 * This GIC on the Platform Baseboard is cascaded off the
+		 * TestChip GIC
+		 */
+		intc_pb11mp: interrupt-controller@1e000000 {
+			compatible = "arm,arm11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x1e001000 0x1000>,
+			      <0x1e000000 0x100>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		/* SMSC 9118 ethernet with PHY and EEPROM */
+		ethernet@4e000000 {
+			compatible = "smsc,lan9118", "smsc,lan9115";
+			reg = <0x4e000000 0x10000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,irq-active-high;
+			smsc,irq-push-pull;
+			vdd33a-supply = <&veth>;
+			vddvario-supply = <&veth>;
+		};
+
+		usb@4f000000 {
+			compatible = "nxp,usb-isp1761";
+			reg = <0x4f000000 0x20000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "peripheral";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-pba8.dts b/arch/arm/boot/dts/arm/arm-realview-pba8.dts
new file mode 100644
index 000000000000..d2e0082245f9
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-pba8.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-pbx.dtsi"
+
+/ {
+	model = "ARM RealView Platform Baseboard for Cortex-A8";
+	compatible = "arm,realview-pba8";
+	arm,hbi = <0x178>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0>;
+		};
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupt-parent = <&intc>;
+		interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	/* Primary GIC PL390 interrupt controller in the test chip */
+	intc: interrupt-controller@1e000000 {
+		compatible = "arm,pl390";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x1e001000 0x1000>,
+		      <0x1e000000 0x100>;
+	};
+};
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&soc {
+	compatible = "arm,realview-pba8-soc", "simple-bus";
+};
+
+&syscon {
+	compatible = "arm,realview-pba8-syscon", "syscon", "simple-mfd";
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+	interrupt-parent = <&intc>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer45 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer67 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+		     <0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts
new file mode 100644
index 000000000000..507ad7ac4974
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts
@@ -0,0 +1,228 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-pbx.dtsi"
+
+/ {
+	/*
+	 * This is the RealView Platform Baseboard Explore for Cortex-A9
+	 * (HBI0182 + HBI0183) as described in ARM DUI 0440B
+	 */
+	model = "ARM RealView Platform Baseboard Explore for Cortex-A9";
+	arm,hbi = <0x182>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+		};
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	L2: cache-controller {
+		compatible = "arm,pl310-cache";
+		reg = <0x1f002000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+		/*
+		 * Override default cache size, sets and
+		 * associativity as these may be erroneously set
+		 * up by boot loader(s).
+		 */
+		cache-size = <131072>; // 128KB
+		cache-sets = <512>;
+		cache-line-size = <32>;
+		arm,parity-disable;
+		arm,tag-latency = <1 1 1>;
+		arm,data-latency = <1 1 1>;
+	};
+
+	scu: scu@1f000000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x1f000000 0x100>;
+	};
+
+	twd_timer: timer@1f000600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x1f000600 0x20>;
+		interrupt-parent = <&intc>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	twd_wdog: watchdog@1f000620 {
+		compatible = "arm,cortex-a9-twd-wdt";
+		reg = <0x1f000620 0x20>;
+		interrupt-parent = <&intc>;
+		interrupts = <1 14 0xf04>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&intc>;
+		interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 45 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CPU0>, <&CPU1>;
+	};
+
+	/* Primary GIC PL390 interrupt controller in the test chip */
+	intc: interrupt-controller@1f000000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x1f001000 0x1000>,
+		      <0x1f000100 0x100>;
+	};
+};
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+	interrupt-parent = <&intc>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer45 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer67 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+		     <0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
new file mode 100644
index 000000000000..e625403a9456
--- /dev/null
+++ b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
@@ -0,0 +1,553 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "arm,realview-pbx";
+
+	chosen { };
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	memory {
+		device_type = "memory";
+		/* 128 MiB memory @ 0x0 */
+		reg = <0x00000000 0x08000000>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	veth: regulator-veth {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	refclk32khz: clock-32768 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	timclk: clock-1000000 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: clock-pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash0@40000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x40000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	flash1@44000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x44000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	/* SMSC 9118 ethernet with PHY and EEPROM */
+	ethernet: ethernet@4e000000 {
+		compatible = "smsc,lan9118", "smsc,lan9115";
+		reg = <0x4e000000 0x10000>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&veth>;
+		vddvario-supply = <&veth>;
+	};
+
+	usb: usb@4f000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x4f000000 0x20000>;
+		dr_mode = "peripheral";
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		/*
+		 * This DDC I2C is connected directly to the DVI portions
+		 * of the connector, so it's not really working when the
+		 * monitor is connected to the VGA connector.
+		 */
+		compatible = "vga-connector";
+		ddc-i2c-bus = <&i2c1>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	soc: soc {
+		compatible = "arm,realview-pbx-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		regmap = <&syscon>;
+		ranges;
+
+		syscon: syscon@10000000 {
+			compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@8,0 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@8,1 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@8,2 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@8,3 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				default-state = "off";
+			};
+			led@8,4 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				default-state = "off";
+			};
+			led@8,5 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				default-state = "off";
+			};
+			led@8,6 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@8,7 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+			oscclk0: clock-controller@c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: clock-controller@10 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: clock-controller@14 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: clock-controller@18 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: clock-controller@1c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		sp810_syscon0: sysctl@10001000 {
+			compatible = "arm,sp810", "arm,primecell";
+			reg = <0x10001000 0x1000>;
+			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+			clock-names = "refclk", "timclk", "apb_pclk";
+			#clock-cells = <1>;
+			clock-output-names = "timerclk0",
+					     "timerclk1",
+					     "timerclk2",
+					     "timerclk3";
+			assigned-clocks = <&sp810_syscon0 0>,
+					  <&sp810_syscon0 1>,
+					  <&sp810_syscon0 2>,
+					  <&sp810_syscon0 3>;
+			assigned-clock-parents = <&timclk>,
+					       <&timclk>,
+					       <&timclk>,
+					       <&timclk>;
+		};
+
+		i2c0: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		serial0: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial1: serial@1000a000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000a000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial2: serial@1000b000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000b000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		ssp: spi@1000d000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1000d000 0x1000>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+
+		wdog0: watchdog@1000f000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x1000f000 0x1000>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		wdog1: watchdog@10010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x10010000 0x1000>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer01: timer@10011000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10011000 0x1000>;
+			clocks = <&sp810_syscon0 0>,
+			         <&sp810_syscon0 1>,
+				 <&pclk>;
+			clock-names = "timerclk0",
+				    "timerclk1",
+				    "apb_pclk";
+		};
+
+		timer23: timer@10012000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10012000 0x1000>;
+			clocks = <&sp810_syscon0 2>,
+			         <&sp810_syscon0 3>,
+				 <&pclk>;
+			clock-names = "timerclk2",
+				    "timerclk3",
+				    "apb_pclk";
+		};
+
+		gpio0: gpio@10013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10013000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		i2c1: i2c@10016000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10016000 0x1000>;
+		};
+
+		rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		timer45: timer@10018000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10018000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timerclk4", "timerclk5", "apb_pclk";
+		};
+
+		timer67: timer@10019000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10019000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timerclk6", "timerclk7", "apb_pclk";
+		};
+
+		sp810_syscon1: sysctl@1001a000 {
+			compatible = "arm,sp810", "arm,primecell";
+			reg = <0x1001a000 0x1000>;
+			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+			clock-names = "refclk", "timclk", "apb_pclk";
+			#clock-cells = <1>;
+			clock-output-names = "timerclk4",
+					     "timerclk5",
+					     "timerclk6",
+					     "timerclk7";
+			assigned-clocks = <&sp810_syscon1 0>,
+					  <&sp810_syscon1 1>,
+					  <&sp810_syscon1 2>,
+					  <&sp810_syscon1 3>;
+			assigned-clock-parents = <&timclk>,
+					       <&timclk>,
+					       <&timclk>,
+					       <&timclk>;
+		};
+	};
+
+
+	/* These peripherals are inside the FPGA */
+	fpga {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mmc: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		serial3: serial@1000c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000c000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+	};
+
+	/* These peripherals are inside the NEC ISSP */
+	issp {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		clcd: clcd@10020000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10020000 0x1000>;
+			interrupt-names = "combined";
+			clocks = <&oscclk4>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/integrator.dtsi b/arch/arm/boot/dts/arm/integrator.dtsi
new file mode 100644
index 000000000000..7f1c8ee9dd8a
--- /dev/null
+++ b/arch/arm/boot/dts/arm/integrator.dtsi
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SoC core Device Tree for the ARM Integrator platforms
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	core-module@10000000 {
+		compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
+		reg = <0x10000000 0x200>;
+		ranges = <0x0 0x10000000 0x200>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* Use core module LED to indicate CPU load */
+		led@c,0 {
+			compatible = "register-bit-led";
+			reg = <0x0c 0x04>;
+			offset = <0x0c>;
+			mask = <0x01>;
+			label = "integrator:core_module";
+			linux,default-trigger = "cpu0";
+			default-state = "on";
+		};
+	};
+
+	ebi@12000000 {
+		compatible = "arm,external-bus-interface";
+		reg = <0x12000000 0x100>;
+	};
+
+	timer@13000000 {
+		reg = <0x13000000 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <5>;
+	};
+
+	timer@13000100 {
+		reg = <0x13000100 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <6>;
+	};
+
+	timer@13000200 {
+		reg = <0x13000200 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <7>;
+	};
+
+	pic@14000000 {
+		compatible = "arm,versatile-fpga-irq";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0x14000000 0x100>;
+		clear-mask = <0xffffffff>;
+	};
+
+	flash@24000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x24000000 0x02000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&pic>;
+
+		/*
+		 * These PrimeCells are in the same locations and using the
+		 * same interrupts in all Integrators, however the silicon
+		 * version deployed is different.
+		 */
+		rtc@15000000 {
+			reg = <0x15000000 0x1000>;
+			interrupts = <8>;
+		};
+
+		serial@16000000 {
+			reg = <0x16000000 0x1000>;
+			interrupts = <1>;
+		};
+
+		serial@17000000 {
+			reg = <0x17000000 0x1000>;
+			interrupts = <2>;
+		};
+
+		kmi@18000000 {
+			reg = <0x18000000 0x1000>;
+			interrupts = <3>;
+		};
+
+		kmi@19000000 {
+			reg = <0x19000000 0x1000>;
+			interrupts = <4>;
+		};
+
+		syscon@1a000000 {
+			/* Debug registers mapped as syscon */
+			compatible = "syscon", "simple-mfd";
+			reg = <0x1a000000 0x10>;
+			ranges = <0x0 0x1a000000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@4,0 {
+				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
+				offset = <0x04>;
+				mask = <0x01>;
+				label = "integrator:green0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@4,1 {
+				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
+				offset = <0x04>;
+				mask = <0x02>;
+				label = "integrator:yellow";
+				default-state = "off";
+			};
+			led@4,2 {
+				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
+				offset = <0x04>;
+				mask = <0x04>;
+				label = "integrator:red";
+				default-state = "off";
+			};
+			led@4,3 {
+				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
+				offset = <0x04>;
+				mask = <0x08>;
+				label = "integrator:green1";
+				default-state = "off";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/integratorap-im-pd1.dts b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
new file mode 100644
index 000000000000..db13e09f2fab
--- /dev/null
+++ b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ARM Integrator/AP platform
+ * with the IM-PD1 example logical module mounted.
+ */
+
+#include "integratorap.dts"
+
+/ {
+	model = "ARM Integrator/AP with IM-PD1";
+	compatible = "arm,integrator-ap";
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		impd1_ram: vram@c2000000 {
+			/* 1 MB of designated video RAM on the IM-PD1 */
+			compatible = "shared-dma-pool";
+			reg = <0xc2000000 0x00100000>;
+			no-map;
+		};
+	};
+};
+
+&lm0 {
+	syscon@0 {
+		compatible = "arm,im-pd1-syscon", "syscon";
+		reg = <0x00000000 0x1000>;
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		vco1: clock-controller@0 {
+			compatible = "arm,impd1-vco1";
+			reg = <0x00 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x08>;
+			vco-offset = <0x00>;
+			clocks = <&sysclk>;
+			clock-output-names = "IM-PD1-VCO1";
+		};
+
+		vco2: clock-controller@4 {
+			compatible = "arm,impd1-vco2";
+			reg = <0x04 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x08>;
+			vco-offset = <0x04>;
+			clocks = <&sysclk>;
+			clock-output-names = "IM-PD1-VCO2";
+		};
+	};
+
+	/* Also used for the Smart Card Interface SCI */
+	impd1_uartclk: clock-uart {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clocks = <&vco2>;
+		clock-output-names = "VCO2_DIV4";
+	};
+
+	/* For the SSP the clock is divided by 64 */
+	impd1_sspclk: clock-ssp {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clock-div = <64>;
+		clock-mult = <1>;
+		clocks = <&vco2>;
+		clock-output-names = "VCO2_DIV64";
+	};
+
+	/* Fixed regulator for the MMC */
+	impd1_3v3: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* Push buttons on the IM-PD1 */
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			debounce-interval = <50>;
+			linux,code = <KEY_UP>;
+			label = "UP";
+			gpios = <&impd1_gpio1 0 GPIO_ACTIVE_HIGH>;
+		};
+		button@1 {
+			debounce-interval = <50>;
+			linux,code = <KEY_DOWN>;
+			label = "DOWN";
+			gpios = <&impd1_gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+		button@2 {
+			debounce-interval = <50>;
+			linux,code = <KEY_LEFT>;
+			label = "LEFT";
+			gpios = <&impd1_gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+		button@3 {
+			debounce-interval = <50>;
+			linux,code = <KEY_RIGHT>;
+			label = "UP";
+			gpios = <&impd1_gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+		button@4 {
+			debounce-interval = <50>;
+			linux,code = <KEY_ESC>;
+			label = "ESC";
+			gpios = <&impd1_gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+		button@5 {
+			debounce-interval = <50>;
+			linux,code = <KEY_ENTER>;
+			label = "ENTER";
+			gpios = <&impd1_gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+
+	bridge {
+		compatible = "ti,ths8134b", "ti,ths8134";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+					vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads_vga_dac>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+		label = "J30";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	serial@100000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x00100000 0x1000>;
+		interrupts-extended = <&impd1_vic 1>;
+		clocks = <&impd1_uartclk>, <&sysclk>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	serial@200000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x00200000 0x1000>;
+		interrupts-extended = <&impd1_vic 2>;
+		clocks = <&impd1_uartclk>, <&sysclk>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	spi@300000 {
+		compatible = "arm,pl022", "arm,primecell";
+		reg = <0x00300000 0x1000>;
+		interrupts-extended = <&impd1_vic 3>;
+		clocks = <&impd1_sspclk>, <&sysclk>;
+		clock-names = "sspclk", "apb_pclk";
+	};
+
+	impd1_gpio0: gpio@400000 {
+		compatible = "arm,pl061", "arm,primecell";
+		reg = <0x00400000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts-extended = <&impd1_vic 4>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	impd1_gpio1: gpio@500000 {
+		compatible = "arm,pl061", "arm,primecell";
+		reg = <0x00500000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts-extended = <&impd1_vic 5>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	rtc@600000 {
+		compatible = "arm,pl030", "arm,primecell";
+		reg = <0x00600000 0x1000>;
+		interrupts-extended = <&impd1_vic 6>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	mmc@700000 {
+		compatible = "arm,pl181", "arm,primecell";
+		reg = <0x00700000 0x1000>;
+		interrupts-extended = <&impd1_vic 7>,
+				    <&impd1_vic 8>;
+		clocks = <&sysclk>, <&sysclk>;
+		clock-names = "mclk", "apb_pclk";
+		bus-width = <1>;
+		max-frequency = <515633>;
+		vmmc-supply = <&impd1_3v3>;
+		wp-gpios = <&impd1_gpio0 3 GPIO_ACTIVE_HIGH>;
+		cd-gpios = <&impd1_gpio0 4 GPIO_ACTIVE_LOW>;
+	};
+
+	aaci@800000 {
+		compatible = "arm,pl041", "arm,primecell";
+		reg = <0x00800000 0x1000>;
+		interrupts-extended = <&impd1_vic 9>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	display@1000000 {
+		compatible = "arm,pl110", "arm,primecell";
+		reg = <0x01000000 0x1000>;
+		interrupts-extended = <&impd1_vic 11>;
+		clocks = <&vco1>, <&sysclk>;
+		clock-names = "clcdclk", "apb_pclk";
+		/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
+		max-memory-bandwidth = <40000000>;
+		memory-region = <&impd1_ram>;
+		dma-ranges;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clcd_pads_vga_dac: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vga_bridge_in>;
+				arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+			};
+		};
+	};
+
+	impd1_vic: interrupt-controller@3000000 {
+		compatible = "arm,pl192-vic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x03000000 0x1000>;
+		/* Valid interrupts, 0-9 and 11 */
+		valid-mask = <0x00000bff>;
+		/* LM site 0 has IRQ 9 on the PIC */
+		interrupts-extended = <&pic 9>;
+	};
+};
diff --git a/arch/arm/boot/dts/arm/integratorap.dts b/arch/arm/boot/dts/arm/integratorap.dts
new file mode 100644
index 000000000000..9b6a1dbaf265
--- /dev/null
+++ b/arch/arm/boot/dts/arm/integratorap.dts
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ARM Integrator/AP platform
+ */
+
+/dts-v1/;
+#include "integrator.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "ARM Integrator/AP";
+	compatible = "arm,integrator-ap";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			/*
+			 * Since the board has pluggable CPU modules, we
+			 * cannot define a proper compatible here. Let the
+			 * boot loader fill in the apropriate compatible
+			 * string if necessary.
+			 */
+			/* compatible = "arm,arm926ej-s"; */
+			reg = <0>;
+			/*
+			 * The documentation in ARM DUI 0138E page 3-12 states
+			 * that the maximum frequency for this clock is 200 MHz
+			 * but painful trial-and-error has proved to me that it
+			 * is actually just hanging the system above 71 MHz.
+			 * Sad but true.
+			 */
+					 /* kHz     uV   */
+			operating-points = <71000  0
+					    66000  0
+					    60000  0
+					    48000  0
+					    36000  0
+					    24000  0
+					    12000  0>;
+			clocks = <&cmosc>;
+			clock-names = "cpu";
+			clock-latency = <1000000>; /* 1 ms */
+		};
+	};
+
+	aliases {
+		arm,timer-primary = &timer2;
+		arm,timer-secondary = &timer1;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
+	};
+
+	/* 24 MHz chrystal on the Integrator/AP development board */
+	xtal24mhz: pclk: clock-24000000 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	/* The UART clock is 14.74 MHz divided by an ICS525 */
+	uartclk: clock-14745600 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <14745600>;
+		clocks = <&xtal24mhz>;
+	};
+
+	core-module@10000000 {
+		/* 24 MHz chrystal on the core module */
+		cm24mhz: clock-24000000 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		/* Oscillator on the core module, clocks the CPU core */
+		cmosc: clock-controller@8 {
+			compatible = "arm,syscon-icst525-integratorap-cm";
+			reg = <0x08 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Auxilary oscillator on the core module, 32.369MHz at boot */
+		auxosc: clock-controller@1c {
+			compatible = "arm,syscon-icst525";
+			reg = <0x1c 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x1c>;
+			clocks = <&cm24mhz>;
+		};
+	};
+
+	syscon {
+		compatible = "arm,integrator-ap-syscon", "syscon";
+		reg = <0x11000000 0x100>;
+		ranges = <0x0 0x11000000 0x100>;
+		#size-cells = <1>;
+		#address-cells = <1>;
+
+		/*
+		 * SYSCLK clocks PCIv3 bridge, system controller and the
+		 * logic modules.
+		 */
+		sysclk: clock-controller@4 {
+			compatible = "arm,syscon-icst525-integratorap-sys";
+			reg = <0x04 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x1c>;
+			vco-offset = <0x04>;
+			clocks = <&xtal24mhz>;
+		};
+
+		/* One-bit control for the PCI bus clock (33 or 25 MHz) */
+		pciclk: clock-controller@4,8 {
+			compatible = "arm,syscon-icst525-integratorap-pci";
+			reg = <0x04 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x1c>;
+			vco-offset = <0x04>;
+			clocks = <&xtal24mhz>;
+		};
+	};
+
+	timer0: timer@13000000 {
+		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
+	};
+
+	timer1: timer@13000100 {
+		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
+	};
+
+	timer2: timer@13000200 {
+		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
+	};
+
+	pic: pic@14000000 {
+		valid-mask = <0x003fffff>;
+	};
+
+	pci: pci@62000000 {
+		compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		/* Bridge registers and config access space */
+		reg = <0x62000000 0x10000>, <0x61000000 0x01000000>;
+		interrupt-parent = <&pic>;
+		interrupts = <17>; /* Bus error IRQ */
+		clocks = <&pciclk>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x01000000 0 0x0000000 /* I/O space @00000000 */
+			0x60000000 0 0x00010000 /* 64 KB @ LB 60000000 */
+			0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */
+			0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */
+			0x42000000 0 0x50000000 /* prefetchable memory @50000000 */
+			0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */
+		dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */
+			0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
+			0x02000000 0 0x80000000 /* Core module alias memory */
+			0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */
+		interrupt-map-mask = <0xf800 0 0 0x7>;
+		interrupt-map = <
+		/* IDSEL 9 */
+		0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
+		0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
+		0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
+		0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
+		/* IDSEL 10 */
+		0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
+		0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
+		0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
+		0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
+		/* IDSEL 11 */
+		0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
+		0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
+		0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
+		0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
+		/* IDSEL 12 */
+		0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
+		0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
+		0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
+		0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
+		>;
+	};
+
+	fpga {
+		/*
+		 * The Integator/AP predates the idea to have magic numbers
+		 * identifying the PrimeCell in hardware, thus we have to
+		 * supply these from the device tree.
+		 */
+		rtc: rtc@15000000 {
+			compatible = "arm,pl030", "arm,primecell";
+			arm,primecell-periphid = <0x00041030>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		uart0: serial@16000000 {
+			compatible = "arm,pl010", "arm,primecell";
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart1: serial@17000000 {
+			compatible = "arm,pl010", "arm,primecell";
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		kmi0: kmi@18000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			arm,primecell-periphid = <0x00041050>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@19000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			arm,primecell-periphid = <0x00041050>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+	};
+
+	/*
+	 * Logic module bus, we support up to 4 logical modules
+	 * They appear at 0xc0000000, 0xd0000000, 0xe0000000 and 0xf0000000
+	 * and use interrupts 9, 10, 11 and 12 respectively.
+	 */
+	bus@c0000000 {
+		compatible = "arm,integrator-ap-lm";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0xc0000000 0xc0000000 0x40000000>;
+		dma-ranges;
+
+		lm0: bus@c0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xc0000000 0x10000000>;
+			dma-ranges = <0x00000000 0xc0000000 0x10000000>;
+			reg = <0xc0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm1: bus@d0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xd0000000 0x10000000>;
+			dma-ranges = <0x00000000 0xd0000000 0x10000000>;
+			reg = <0xd0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm2: bus@e0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xe0000000 0x10000000>;
+			dma-ranges = <0x00000000 0xe0000000 0x10000000>;
+			reg = <0xe0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm3: bus@f0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xf0000000 0x10000000>;
+			dma-ranges = <0x00000000 0xf0000000 0x10000000>;
+			reg = <0xf0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/integratorcp.dts b/arch/arm/boot/dts/arm/integratorcp.dts
new file mode 100644
index 000000000000..8ad1a8957ace
--- /dev/null
+++ b/arch/arm/boot/dts/arm/integratorcp.dts
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ARM Integrator/CP platform
+ */
+
+/dts-v1/;
+/include/ "integrator.dtsi"
+
+/ {
+	model = "ARM Integrator/CP";
+	compatible = "arm,integrator-cp";
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			/*
+			 * Since the board has pluggable CPU modules, we
+			 * cannot define a proper compatible here. Let the
+			 * boot loader fill in the apropriate compatible
+			 * string if necessary.
+			 */
+			/* compatible = "arm,arm920t"; */
+			reg = <0>;
+			/*
+			 * TBD comment.
+			 */
+					 /* kHz     uV   */
+			operating-points = <50000  0
+					    48000  0>;
+			clocks = <&cmcore>;
+			clock-names = "cpu";
+			clock-latency = <1000000>; /* 1 ms */
+		};
+	};
+
+	/*
+	 * The Integrator/CP overall clocking architecture can be found in
+	 * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which
+	 * appear to illustrate the layout used in most configurations.
+	 */
+
+	/* The codec chrystal operates at 24.576 MHz */
+	xtal_codec: clock-24576000 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24576000>;
+	};
+
+	/* The chrystal is divided by 2 by the codec for the AACI bit clock */
+	aaci_bitclk: clock-12288000 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <2>;
+		clock-mult = <1>;
+		clocks = <&xtal_codec>;
+	};
+
+	/* This is a 25MHz chrystal on the base board */
+	xtal25mhz: clock-25000000 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
+	uartclk: clock-14745600 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <14745600>;
+	};
+
+	/* Actually sysclk I think */
+	pclk: clock-pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	core-module@10000000 {
+		/* 24 MHz chrystal on the core module */
+		cm24mhz: clock-24000000 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		/* Oscillator on the core module, clocks the CPU core */
+		cmcore: clock-controller@8 {
+			compatible = "arm,syscon-icst525-integratorcp-cm-core";
+			reg = <0x08 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Oscillator on the core module, clocks the memory bus */
+		cmmem: clock-controller@8,12 {
+			compatible = "arm,syscon-icst525-integratorcp-cm-mem";
+			reg = <0x08 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Auxilary oscillator on the core module, clocks the CLCD */
+		auxosc: clock-controller@1c {
+			compatible = "arm,syscon-icst525";
+			reg = <0x1c 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x1c>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* The KMI clock is the 24 MHz oscillator divided to 8MHz */
+		kmiclk: kmiclk@1M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <3>;
+			clock-mult = <1>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
+		timclk: clock-1000000 {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <24>;
+			clock-mult = <1>;
+			clocks = <&cm24mhz>;
+		};
+	};
+
+	syscon {
+		compatible = "arm,integrator-cp-syscon", "syscon";
+		reg = <0xcb000000 0x100>;
+	};
+
+	timer0: timer@13000000 {
+		/* TIMER0 runs directly on the 25MHz chrystal */
+		compatible = "arm,integrator-cp-timer";
+		clocks = <&xtal25mhz>;
+	};
+
+	timer1: timer@13000100 {
+		/* TIMER1 runs @ 1MHz */
+		compatible = "arm,integrator-cp-timer";
+		clocks = <&timclk>;
+	};
+
+	timer2: timer@13000200 {
+		/* TIMER2 runs @ 1MHz */
+		compatible = "arm,integrator-cp-timer";
+		clocks = <&timclk>;
+	};
+
+	pic: pic@14000000 {
+		valid-mask = <0x1fc003ff>;
+	};
+
+	cic: cic@10000040 {
+		compatible = "arm,versatile-fpga-irq";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0x10000040 0x100>;
+		clear-mask = <0xffffffff>;
+		valid-mask = <0x00000007>;
+	};
+
+	/* The SIC is cascaded off IRQ 26 on the PIC */
+	sic: sic@ca000000 {
+		compatible = "arm,versatile-fpga-irq";
+		interrupt-parent = <&pic>;
+		interrupts = <26>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0xca000000 0x100>;
+		clear-mask = <0x00000fff>;
+		valid-mask = <0x00000fff>;
+	};
+
+	ethernet@c8000000 {
+		compatible = "smsc,lan91c111";
+		reg = <0xc8000000 0x10>;
+		interrupt-parent = <&pic>;
+		interrupts = <27>;
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads_vga_dac>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	fpga {
+		/*
+		 * These PrimeCells are at the same location and using
+		 * the same interrupts in all Integrators, but in the CP
+		 * slightly newer versions are deployed.
+		 */
+		rtc@15000000 {
+			compatible = "arm,pl031", "arm,primecell";
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		serial@16000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial@17000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		kmi@18000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi@19000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		/*
+		 * These PrimeCells are only available on the Integrator/CP
+		 */
+		mmc@1c000000 {
+			compatible = "arm,pl180", "arm,primecell";
+			reg = <0x1c000000 0x1000>;
+			interrupts = <23 24>;
+			max-frequency = <515633>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+		};
+
+		aaci@1d000000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x1d000000 0x1000>;
+			interrupts = <25>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		clcd@c0000000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0xC0000000 0x1000>;
+			interrupts = <22>;
+			clocks = <&auxosc>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
+			max-memory-bandwidth = <40000000>;
+
+			/*
+			 * This port is routed through a PLD (Programmable
+			 * Logic Device) that routes the output from the CLCD
+			 * (after transformations) to the VGA DAC and also an
+			 * external panel connector. The PLD is essential for
+			 * supporting RGB565/BGR565.
+			 *
+			 * The signals from the port thus reaches two endpoints.
+			 * The PLD is managed through a few special bits in the
+			 * FPGA "sysreg".
+			 *
+			 * This arrangement can be clearly seen in
+			 * ARM DUI 0225D, page 3-41, figure 3-19.
+			 */
+			port@0 {
+				clcd_pads_vga_dac: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/mps2-an385.dts b/arch/arm/boot/dts/arm/mps2-an385.dts
new file mode 100644
index 000000000000..aebbebfc25d1
--- /dev/null
+++ b/arch/arm/boot/dts/arm/mps2-an385.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "mps2.dtsi"
+
+/ {
+	model = "ARM MPS2 Application Note 385/386";
+	compatible = "arm,mps2";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:9600n8";
+	};
+
+	memory@21000000 {
+		device_type = "memory";
+		reg = <0x21000000 0x1000000>;
+	};
+
+	smb {
+		ethernet@0,0 {
+			compatible = "smsc,lan9220", "smsc,lan9115";
+			reg = <0 0x0 0x10000>;
+			interrupts = <13>;
+			interrupt-parent = <&nvic>;
+			smsc,irq-active-high;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&timer0 {
+	status = "okay";
+};
+
+&timer1 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/arm/mps2-an399.dts b/arch/arm/boot/dts/arm/mps2-an399.dts
new file mode 100644
index 000000000000..349abf70b2a5
--- /dev/null
+++ b/arch/arm/boot/dts/arm/mps2-an399.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "mps2.dtsi"
+
+/ {
+	model = "ARM MPS2 Application Note 399/400";
+	compatible = "arm,mps2";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:9600n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x1000000>;
+	};
+
+	smb {
+		ethernet@1,0 {
+			compatible = "smsc,lan9220", "smsc,lan9115";
+			reg = <1 0x0 0x10000>;
+			interrupts = <13>;
+			interrupt-parent = <&nvic>;
+			smsc,irq-active-high;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&timer0 {
+	status = "okay";
+};
+
+&timer1 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/arm/mps2.dtsi b/arch/arm/boot/dts/arm/mps2.dtsi
new file mode 100644
index 000000000000..e240bc8aa605
--- /dev/null
+++ b/arch/arm/boot/dts/arm/mps2.dtsi
@@ -0,0 +1,220 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "../armv7-m.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	oscclk0: clock-50000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	oscclk1: clock-24576000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	oscclk2: clock-25000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	cfgclk: clock-5000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <5000000>;
+	};
+
+	spicfgclk: clock-75000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <75000000>;
+	};
+
+	sysclk: spiclcd: spicon: i2cclcd: i2caud: clock-sys {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk0>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	audmclk: clk-12388000 {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk1>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	audsclk: clk-3072000 {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk1>;
+		#clock-cells = <0>;
+		clock-div = <8>;
+		clock-mult = <1>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+
+		apb@40000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x40000000 0x10000>;
+
+			timer0: mps2-timer0@0 {
+				compatible = "arm,mps2-timer";
+				reg = <0x0 0x1000>;
+				interrupts = <8>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			timer1: mps2-timer1@1000 {
+				compatible = "arm,mps2-timer";
+				reg = <0x1000 0x1000>;
+				interrupts = <9>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			timer2: dual-timer@2000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x2000 0x1000>;
+				clocks = <&sysclk>, <&sysclk>, <&sysclk>;
+				clock-names = "timer0clk", "timer1clk",
+					       "apb_pclk";
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			uart0: serial@4000 {
+				compatible = "arm,mps2-uart";
+				reg = <0x4000 0x1000>;
+				interrupts = <0>, <1>, <12>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			uart1: serial@5000 {
+				compatible = "arm,mps2-uart";
+				reg = <0x5000 0x1000>;
+				interrupts = <2>, <3>, <12>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			uart2: serial@6000 {
+				compatible = "arm,mps2-uart";
+				reg = <0x6000 0x1000>;
+				interrupts = <4>, <5>, <12>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			wdt: watchdog@8000 {
+				compatible = "arm,sp805", "arm,primecell";
+				arm,primecell-periphid = <0x00141805>;
+				reg = <0x8000 0x1000>;
+				interrupts = <0>;
+				clocks = <&sysclk>, <&sysclk>;
+				clock-names = "wdog_clk", "apb_pclk";
+				status = "disabled";
+			};
+		};
+	};
+
+	fpga@40020000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40020000 0x10000>;
+
+		fpgaio@8000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x8000 0x10>;
+
+			ranges = <0x0 0x8000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@0,0 {
+				compatible = "register-bit-led";
+				reg = <0x00 0x04>;
+				offset = <0x0>;
+				mask = <0x01>;
+				label = "userled:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+
+			led@0,1 {
+				compatible = "register-bit-led";
+				reg = <0x00 0x04>;
+				offset = <0x0>;
+				mask = <0x02>;
+				label = "userled:1";
+				linux,default-trigger = "usr";
+				default-state = "off";
+			};
+		};
+	};
+
+	smb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x40200000 0x10000>,
+			 <1 0 0xa0000000 0x10000>;
+	};
+};
diff --git a/arch/arm/boot/dts/arm/versatile-ab-ib2.dts b/arch/arm/boot/dts/arm/versatile-ab-ib2.dts
new file mode 100644
index 000000000000..7ebb0dfd0467
--- /dev/null
+++ b/arch/arm/boot/dts/arm/versatile-ab-ib2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The Versatile AB with the IB2 expansion board mounted.
+ * This works as a superset of the Versatile AB.
+ */
+
+#include "versatile-ab.dts"
+
+/ {
+	model = "ARM Versatile AB + IB2 board";
+
+	/* Special IB2 control register */
+	syscon@27000000 {
+		compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd";
+		reg = <0x27000000 0x4>;
+		ranges = <0x0 0x27000000 0x4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		led@0,4 {
+			compatible = "register-bit-led";
+			reg = <0x00 0x04>;
+			offset = <0x00>;
+			mask = <0x10>;
+			label = "versatile-ib2:0";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/versatile-ab.dts b/arch/arm/boot/dts/arm/versatile-ab.dts
new file mode 100644
index 000000000000..635ab9268899
--- /dev/null
+++ b/arch/arm/boot/dts/arm/versatile-ab.dts
@@ -0,0 +1,449 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/ {
+	model = "ARM Versatile AB";
+	compatible = "arm,versatile-ab";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		i2c0 = &i2c0;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	xtal24mhz: clock-24000000 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	bridge {
+		compatible = "ti,ths8134b", "ti,ths8134";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads_vga_dac>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+		label = "J1";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	core-module@10000000 {
+		compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
+		reg = <0x10000000 0x200>;
+		ranges = <0x0 0x10000000 0x200>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		led@8,0 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x01>;
+			label = "versatile:0";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+		led@8,1 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x02>;
+			label = "versatile:1";
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+		led@8,2 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x04>;
+			label = "versatile:2";
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+		led@8,3 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x08>;
+			label = "versatile:3";
+			default-state = "off";
+		};
+		led@8,4 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x10>;
+			label = "versatile:4";
+			default-state = "off";
+		};
+		led@8,5 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x20>;
+			label = "versatile:5";
+			default-state = "off";
+		};
+		led@8,6 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x40>;
+			label = "versatile:6";
+			default-state = "off";
+		};
+		led@8,7 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x80>;
+			label = "versatile:7";
+			default-state = "off";
+		};
+
+		/* OSC1 on AB, OSC4 on PB */
+		osc1: clock-osc {
+			#clock-cells = <0>;
+			compatible = "arm,versatile-cm-auxosc";
+			clocks = <&xtal24mhz>;
+		};
+
+		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
+		timclk: clock-1000000 {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <24>;
+			clock-mult = <1>;
+			clocks = <&xtal24mhz>;
+		};
+
+		pclk: clock-pclk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&xtal24mhz>;
+		};
+	};
+
+	flash@34000000 {
+		/* 64 MiB NOR flash in non-interleaved chips */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x34000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	i2c0: i2c@10002000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "arm,versatile-i2c";
+		reg = <0x10002000 0x1000>;
+
+		rtc@68 {
+			compatible = "dallas,ds1338";
+			reg = <0x68>;
+		};
+	};
+
+	net@10010000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x10010000 0x10000>;
+		interrupts = <25>;
+	};
+
+	lcd@10008000 {
+		compatible = "arm,versatile-lcd";
+		reg = <0x10008000 0x1000>;
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vic: interrupt-controller@10140000 {
+			compatible = "arm,versatile-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10140000 0x1000>;
+			valid-mask = <0xffffffff>;
+		};
+
+		sic: interrupt-controller@10003000 {
+			compatible = "arm,versatile-sic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10003000 0x1000>;
+			interrupt-parent = <&vic>;
+			interrupts = <31>; /* Cascaded to vic */
+			clear-mask = <0xffffffff>;
+			/*
+			 * Valid interrupt lines mask according to
+			 * table 4-36 page 4-50 of ARM DUI 0225D
+			 */
+			valid-mask = <0x0760031b>;
+		};
+
+		dma@10130000 {
+			compatible = "arm,pl081", "arm,primecell";
+			reg = <0x10130000 0x1000>;
+			interrupts = <17>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		uart0: serial@101f1000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f1000 0x1000>;
+			interrupts = <12>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart1: serial@101f2000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f2000 0x1000>;
+			interrupts = <13>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart2: serial@101f3000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f3000 0x1000>;
+			interrupts = <14>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		smc@10100000 {
+			compatible = "arm,primecell";
+			reg = <0x10100000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mpmc@10110000 {
+			compatible = "arm,primecell";
+			reg = <0x10110000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		display@10120000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x10120000 0x1000>;
+			interrupts = <16>;
+			clocks = <&osc1>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 800x600 16bpp @ 36MHz works fine */
+			max-memory-bandwidth = <54000000>;
+
+			/*
+			 * This port is routed through a PLD (Programmable
+			 * Logic Device) that routes the output from the CLCD
+			 * (after transformations) to the VGA DAC and also an
+			 * external panel connector. The PLD is essential for
+			 * supporting RGB565/BGR565.
+			 *
+			 * The signals from the port thus reaches two endpoints.
+			 * The PLD is managed through a few special bits in the
+			 * FPGA "sysreg".
+			 *
+			 * This arrangement can be clearly seen in
+			 * ARM DUI 0225D, page 3-41, figure 3-19.
+			 */
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				clcd_pads_panel: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&panel_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+				clcd_pads_vga_dac: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+
+		sctl@101e0000 {
+			compatible = "arm,primecell";
+			reg = <0x101e0000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		watchdog@101e1000 {
+			compatible = "arm,primecell";
+			reg = <0x101e1000 0x1000>;
+			interrupts = <0>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		timer@101e2000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x101e2000 0x1000>;
+			interrupts = <4>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0", "timer1", "apb_pclk";
+		};
+
+		timer@101e3000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x101e3000 0x1000>;
+			interrupts = <5>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0", "timer1", "apb_pclk";
+		};
+
+		gpio0: gpio@101e4000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e4000 0x1000>;
+			gpio-controller;
+			interrupts = <6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@101e5000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e5000 0x1000>;
+			interrupts = <7>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc@101e8000 {
+			compatible = "arm,pl030", "arm,primecell";
+			reg = <0x101e8000 0x1000>;
+			interrupts = <10>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		sci@101f0000 {
+			compatible = "arm,primecell";
+			reg = <0x101f0000 0x1000>;
+			interrupts = <15>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		spi@101f4000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x101f4000 0x1000>;
+			interrupts = <11>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+
+		fpga {
+			compatible = "arm,versatile-fpga", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x10000000 0x10000>;
+
+			sysreg@0 {
+				compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
+				reg = <0x00000 0x1000>;
+
+				panel: display@0 {
+					compatible = "arm,versatile-tft-panel";
+
+					port {
+						panel_in: endpoint {
+							remote-endpoint = <&clcd_pads_panel>;
+						};
+					};
+				};
+			};
+
+			aaci@4000 {
+				compatible = "arm,primecell";
+				reg = <0x4000 0x1000>;
+				interrupts = <24>;
+				clocks = <&pclk>;
+				clock-names = "apb_pclk";
+			};
+			mmc@5000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = <0x5000 0x1000>;
+				interrupts-extended = <&vic 22 &sic 1>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "mclk", "apb_pclk";
+			};
+			kmi@6000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x6000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <3>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+			kmi@7000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x7000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <4>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/versatile-pb.dts b/arch/arm/boot/dts/arm/versatile-pb.dts
new file mode 100644
index 000000000000..fc21ce54b33a
--- /dev/null
+++ b/arch/arm/boot/dts/arm/versatile-pb.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "versatile-ab.dts"
+
+/ {
+	model = "ARM Versatile PB";
+	compatible = "arm,versatile-pb";
+
+	amba {
+		/* The Versatile PB is using more SIC IRQ lines than the AB */
+		sic: interrupt-controller@10003000 {
+			clear-mask = <0xffffffff>;
+			/*
+			 * Valid interrupt lines mask according to
+			 * figure 3-30 page 3-74 of ARM DUI 0224B
+			 */
+			valid-mask = <0x7fe003ff>;
+		};
+
+		gpio2: gpio@101e6000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e6000 0x1000>;
+			interrupts = <8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@101e7000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e7000 0x1000>;
+			interrupts = <9>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		pci@10001000 {
+			compatible = "arm,versatile-pci";
+			device_type = "pci";
+			reg = <0x10001000 0x1000
+			       0x41000000 0x10000
+			       0x42000000 0x100000>;
+			bus-range = <0 0xff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			ranges = <0x01000000 0 0x00000000 0x43000000 0 0x00010000   /* downstream I/O */
+				  0x02000000 0 0x50000000 0x50000000 0 0x10000000   /* non-prefetchable memory */
+				  0x42000000 0 0x60000000 0x60000000 0 0x10000000>; /* prefetchable memory */
+
+			interrupt-map-mask = <0x1800 0 0 7>;
+			interrupt-map = <0x1800 0 0 1 &sic 28
+					 0x1800 0 0 2 &sic 29
+					 0x1800 0 0 3 &sic 30
+					 0x1800 0 0 4 &sic 27
+
+					 0x1000 0 0 1 &sic 27
+					 0x1000 0 0 2 &sic 28
+					 0x1000 0 0 3 &sic 29
+					 0x1000 0 0 4 &sic 30
+
+					 0x0800 0 0 1 &sic 30
+					 0x0800 0 0 2 &sic 27
+					 0x0800 0 0 3 &sic 28
+					 0x0800 0 0 4 &sic 29
+
+					 0x0000 0 0 1 &sic 29
+					 0x0000 0 0 2 &sic 30
+					 0x0000 0 0 3 &sic 27
+					 0x0000 0 0 4 &sic 28>;
+		};
+
+		fpga {
+			mmc@5000 {
+				/*
+				 * Overrides the interrupt assignment from
+				 * the Versatile AB board file.
+				 */
+				interrupts-extended = <&sic 22 &sic 23>;
+			};
+			serial@9000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x9000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <6>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+			sci@a000 {
+				compatible = "arm,primecell";
+				reg = <0xa000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <5>;
+				clocks = <&xtal24mhz>;
+				clock-names = "apb_pclk";
+			};
+			mmc@b000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = <0xb000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <1>, <2>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "mclk", "apb_pclk";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi
new file mode 100644
index 000000000000..158b3923eae3
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * original variant (vexpress-v2m.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m.dtsi!
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	v2m_fixed_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	v2m_clk24mhz: clock-24000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "v2m:clk24mhz";
+	};
+
+	v2m_refclk1mhz: clock-1000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+		clock-output-names = "v2m:refclk1mhz";
+	};
+
+	v2m_refclk32khz: clock-32768 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "v2m:refclk32khz";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			label = "v2m:green:user1";
+			gpios = <&v2m_led_gpios 0 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			label = "v2m:green:user2";
+			gpios = <&v2m_led_gpios 1 0>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		led-3 {
+			label = "v2m:green:user3";
+			gpios = <&v2m_led_gpios 2 0>;
+			linux,default-trigger = "cpu0";
+		};
+
+		led-4 {
+			label = "v2m:green:user4";
+			gpios = <&v2m_led_gpios 3 0>;
+			linux,default-trigger = "cpu1";
+		};
+
+		led-5 {
+			label = "v2m:green:user5";
+			gpios = <&v2m_led_gpios 4 0>;
+			linux,default-trigger = "cpu2";
+		};
+
+		led-6 {
+			label = "v2m:green:user6";
+			gpios = <&v2m_led_gpios 5 0>;
+			linux,default-trigger = "cpu3";
+		};
+
+		led-7 {
+			label = "v2m:green:user7";
+			gpios = <&v2m_led_gpios 6 0>;
+			linux,default-trigger = "cpu4";
+		};
+
+		led-8 {
+			label = "v2m:green:user8";
+			gpios = <&v2m_led_gpios 7 0>;
+			linux,default-trigger = "cpu5";
+		};
+	};
+
+	bus@8000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 63>;
+		interrupt-map = <0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		motherboard-bus@8000000 {
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			ranges = <0 0 0x08000000 0x04000000>,
+				 <1 0 0x14000000 0x04000000>,
+				 <2 0 0x18000000 0x04000000>,
+				 <3 0 0x1c000000 0x04000000>,
+				 <4 0 0x0c000000 0x04000000>,
+				 <5 0 0x10000000 0x04000000>;
+
+			nor_flash: flash@0 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <4 0x00000000 0x04000000>;
+				bank-width = <4>;
+				partitions {
+					compatible = "arm,arm-firmware-suite";
+				};
+			};
+
+			psram@100000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <1 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
+
+			ethernet@202000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <2 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
+
+			usb@203000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <2 0x03000000 0x20000>;
+				interrupts = <16>;
+				dr_mode = "peripheral";
+			};
+
+			iofpga-bus@300000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 3 0 0x200000>;
+
+				v2m_sysreg: sysreg@10000 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x010000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x10000 0x1000>;
+
+					v2m_led_gpios: gpio@8 {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						reg = <0x008 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: gpio@48 {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						reg = <0x048 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: gpio@4c {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						reg = <0x04c 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+				};
+
+				v2m_sysctl: sysctl@20000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x020000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@30000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x030000 0x1000>;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
+
+				aaci@40000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x040000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				mmc@50000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x050000 0x1000>;
+					interrupts = <9>, <10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@60000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x060000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@70000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x070000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				v2m_serial0: serial@90000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x090000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial1: serial@a0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a0000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial2: serial@b0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b0000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial3: serial@c0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c0000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				watchdog@f0000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f0000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdog_clk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@110000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x110000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@120000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x120000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@160000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x160000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+
+						ports {
+							#address-cells = <1>;
+							#size-cells = <0>;
+
+							port@0 {
+								reg = <0>;
+								dvi_bridge_in: endpoint {
+									remote-endpoint = <&clcd_pads>;
+								};
+							};
+						};
+					};
+
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
+				};
+
+				rtc@170000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x170000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				compact-flash@1a0000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a0000 0x100
+					       0x1a0100 0xf00>;
+					reg-shift = <2>;
+				};
+
+				clcd@1f0000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f0000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					/* 800x600 16bpp @36MHz works fine */
+					max-memory-bandwidth = <54000000>;
+					memory-region = <&vram>;
+
+					port {
+						clcd_pads: endpoint {
+							remote-endpoint = <&dvi_bridge_in>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+						};
+					};
+				};
+
+				mcc {
+					compatible = "arm,vexpress,config-bus";
+					arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+					oscclk0 {
+						/* MCC static memory clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 0>;
+						freq-range = <25000000 60000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk0";
+					};
+
+					v2m_oscclk1: oscclk1 {
+						/* CLCD clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 1>;
+						freq-range = <23750000 65000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk1";
+					};
+
+					v2m_oscclk2: oscclk2 {
+						/* IO FPGA peripheral clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 2>;
+						freq-range = <24000000 24000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk2";
+					};
+
+					volt-vio {
+						/* Logic level voltage */
+						compatible = "arm,vexpress-volt";
+						arm,vexpress-sysreg,func = <2 0>;
+						regulator-name = "VIO";
+						regulator-always-on;
+						label = "VIO";
+					};
+
+					temp-mcc {
+						/* MCC internal operating temperature */
+						compatible = "arm,vexpress-temp";
+						arm,vexpress-sysreg,func = <4 0>;
+						label = "MCC";
+					};
+
+					reset {
+						compatible = "arm,vexpress-reset";
+						arm,vexpress-sysreg,func = <5 0>;
+					};
+
+					muxfpga {
+						compatible = "arm,vexpress-muxfpga";
+						arm,vexpress-sysreg,func = <7 0>;
+					};
+
+					shutdown {
+						compatible = "arm,vexpress-shutdown";
+						arm,vexpress-sysreg,func = <8 0>;
+					};
+
+					reboot {
+						compatible = "arm,vexpress-reboot";
+						arm,vexpress-sysreg,func = <9 0>;
+					};
+
+					dvimode {
+						compatible = "arm,vexpress-dvimode";
+						arm,vexpress-sysreg,func = <11 0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/vexpress-v2m.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
new file mode 100644
index 000000000000..be03f2a8a57a
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
@@ -0,0 +1,509 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * Original memory map ("Legacy memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m-rs1.dtsi!
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	bus@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x40000000 0x40000000 0x10000000>,
+			 <0x10000000 0x10000000 0x00020000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 63>;
+		interrupt-map = <0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		motherboard-bus@40000000 {
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			ranges = <0 0 0x40000000 0x04000000>,
+				 <1 0 0x44000000 0x04000000>,
+				 <2 0 0x48000000 0x04000000>,
+				 <3 0 0x4c000000 0x04000000>,
+				 <7 0 0x10000000 0x00020000>;
+
+			flash@0,00000000 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <1 0x00000000 0x04000000>;
+				bank-width = <4>;
+				partitions {
+					compatible = "arm,arm-firmware-suite";
+				};
+			};
+
+			psram@2,00000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <2 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
+
+			ethernet@3,02000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <3 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
+
+			usb@3,03000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <3 0x03000000 0x20000>;
+				interrupts = <16>;
+				dr_mode = "peripheral";
+			};
+
+			iofpga@7,00000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 7 0 0x20000>;
+
+				v2m_sysreg: sysreg@0 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x00000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0 0x1000>;
+
+					v2m_led_gpios: gpio@8 {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						reg = <0x008 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: gpio@48 {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						reg = <0x048 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: gpio@4c {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						reg = <0x04c 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+				};
+
+				v2m_sysctl: sysctl@1000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x01000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@2000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x02000 0x1000>;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
+
+				aaci@4000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x04000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				mmci@5000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x05000 0x1000>;
+					interrupts = <9>, <10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@6000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x06000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@7000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x07000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				v2m_serial0: serial@9000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x09000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial1: serial@a000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial2: serial@b000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial3: serial@c000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				wdt@f000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdog_clk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@11000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x11000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@12000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x12000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@16000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x16000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+
+						ports {
+							#address-cells = <1>;
+							#size-cells = <0>;
+
+							/*
+							 * Both the core tile and the motherboard routes their output
+							 * pads to this transmitter. The motherboard system controller
+							 * can select one of them as input using a mux register in
+							 * "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is
+							 * the only platform with this specific set-up.
+							 */
+							port@0 {
+								reg = <0>;
+								dvi_bridge_in_ct: endpoint {
+									remote-endpoint = <&clcd_pads_ct>;
+								};
+							};
+							port@1 {
+								reg = <1>;
+								dvi_bridge_in_mb: endpoint {
+									remote-endpoint = <&clcd_pads_mb>;
+								};
+							};
+						};
+					};
+
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
+				};
+
+				rtc@17000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x17000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				compact-flash@1a000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a000 0x100
+					       0x1a100 0xf00>;
+					reg-shift = <2>;
+				};
+
+
+				clcd@1f000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					/* 800x600 16bpp @36MHz works fine */
+					max-memory-bandwidth = <54000000>;
+					memory-region = <&vram>;
+
+					port {
+						clcd_pads_mb: endpoint {
+							remote-endpoint = <&dvi_bridge_in_mb>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+						};
+					};
+				};
+			};
+
+			v2m_fixed_3v3: regulator-3v3 {
+				compatible = "regulator-fixed";
+				regulator-name = "3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			v2m_clk24mhz: clock-24000000 {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+				clock-output-names = "v2m:clk24mhz";
+			};
+
+			v2m_refclk1mhz: clock-1000000 {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <1000000>;
+				clock-output-names = "v2m:refclk1mhz";
+			};
+
+			v2m_refclk32khz: clock-32768 {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <32768>;
+				clock-output-names = "v2m:refclk32khz";
+			};
+
+			leds {
+				compatible = "gpio-leds";
+
+				led-user1 {
+					label = "v2m:green:user1";
+					gpios = <&v2m_led_gpios 0 0>;
+					linux,default-trigger = "heartbeat";
+				};
+
+				led-user2 {
+					label = "v2m:green:user2";
+					gpios = <&v2m_led_gpios 1 0>;
+					linux,default-trigger = "mmc0";
+				};
+
+				led-user3 {
+					label = "v2m:green:user3";
+					gpios = <&v2m_led_gpios 2 0>;
+					linux,default-trigger = "cpu0";
+				};
+
+				led-user4 {
+					label = "v2m:green:user4";
+					gpios = <&v2m_led_gpios 3 0>;
+					linux,default-trigger = "cpu1";
+				};
+
+				led-user5 {
+					label = "v2m:green:user5";
+					gpios = <&v2m_led_gpios 4 0>;
+					linux,default-trigger = "cpu2";
+				};
+
+				led-user6 {
+					label = "v2m:green:user6";
+					gpios = <&v2m_led_gpios 5 0>;
+					linux,default-trigger = "cpu3";
+				};
+
+				led-user7 {
+					label = "v2m:green:user7";
+					gpios = <&v2m_led_gpios 6 0>;
+					linux,default-trigger = "cpu4";
+				};
+
+				led-user8 {
+					label = "v2m:green:user8";
+					gpios = <&v2m_led_gpios 7 0>;
+					linux,default-trigger = "cpu5";
+				};
+			};
+
+			mcc {
+				compatible = "arm,vexpress,config-bus";
+				arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+				clock-controller-0 {
+					/* MCC static memory clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 0>;
+					freq-range = <25000000 60000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk0";
+				};
+
+				v2m_oscclk1: clock-controller-1 {
+					/* CLCD clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 1>;
+					freq-range = <23750000 65000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk1";
+				};
+
+				v2m_oscclk2: clock-controller-2 {
+					/* IO FPGA peripheral clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 2>;
+					freq-range = <24000000 24000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk2";
+				};
+
+				regulator-vio {
+					/* Logic level voltage */
+					compatible = "arm,vexpress-volt";
+					arm,vexpress-sysreg,func = <2 0>;
+					regulator-name = "VIO";
+					regulator-always-on;
+					label = "VIO";
+				};
+
+				temp-mcc {
+					/* MCC internal operating temperature */
+					compatible = "arm,vexpress-temp";
+					arm,vexpress-sysreg,func = <4 0>;
+					label = "MCC";
+				};
+
+				reset {
+					compatible = "arm,vexpress-reset";
+					arm,vexpress-sysreg,func = <5 0>;
+				};
+
+				muxfpga {
+					compatible = "arm,vexpress-muxfpga";
+					arm,vexpress-sysreg,func = <7 0>;
+				};
+
+				shutdown {
+					compatible = "arm,vexpress-shutdown";
+					arm,vexpress-sysreg,func = <8 0>;
+				};
+
+				reboot {
+					compatible = "arm,vexpress-reboot";
+					arm,vexpress-sysreg,func = <9 0>;
+				};
+
+				dvimode {
+					compatible = "arm,vexpress-dvimode";
+					arm,vexpress-sysreg,func = <11 0>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts
new file mode 100644
index 000000000000..5a91e936edef
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A15x2 (version with Test Chip 1)
+ * Cortex-A15 MPCore (V2P-CA15)
+ *
+ * HBI-0237A
+ */
+
+/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
+
+/ {
+	model = "V2P-CA15";
+	arm,hbi = <0x237>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Chipselect 2 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0 0x18000000 0 0x00800000>;
+			no-map;
+		};
+	};
+
+	hdlcd@2b000000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x2b000000 0 0x1000>;
+		interrupts = <0 85 4>;
+		clocks = <&hdlcd_clk>;
+		clock-names = "pxlclk";
+	};
+
+	memory-controller@2b0a0000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0 0x2b0a0000 0 0x1000>;
+		clocks = <&sys_pll>;
+		clock-names = "apb_pclk";
+	};
+
+	wdt@2b060000 {
+		compatible = "arm,sp805", "arm,primecell";
+		status = "disabled";
+		reg = <0 0x2b060000 0 0x1000>;
+		interrupts = <0 98 4>;
+		clocks = <&sys_pll>, <&sys_pll>;
+		clock-names = "wdog_clk", "apb_pclk";
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
+		      <0 0x2c004000 0 0x2000>,
+		      <0 0x2c006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	memory-controller@7ffd0000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0 0x7ffd0000 0 0x1000>;
+		interrupts = <0 86 4>,
+			     <0 87 4>;
+		clocks = <&sys_pll>;
+		clock-names = "apb_pclk";
+	};
+
+	dma@7ffb0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0 0x7ffb0000 0 0x1000>;
+		interrupts = <0 92 4>,
+			     <0 88 4>,
+			     <0 89 4>,
+			     <0 90 4>,
+			     <0 91 4>;
+		clocks = <&sys_pll>;
+		clock-names = "apb_pclk";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <0 68 4>,
+			     <0 69 4>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		clock-controller-0 {
+			/* CPU PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <50000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		clock-controller-4 {
+			/* Multiplexed AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		hdlcd_clk: clock-controller-5 {
+			/* HDLCD PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		smbclk: clock-controller-6 {
+			/* SMB clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 6>;
+			freq-range = <20000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk6";
+		};
+
+		sys_pll: clock-controller-7 {
+			/* SYS PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 7>;
+			freq-range = <20000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk7";
+		};
+
+		clock-controller-8 {
+			/* DDR2 PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 8>;
+			freq-range = <40000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk8";
+		};
+
+		regulator-cores {
+			/* CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "Cores";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			label = "Cores";
+		};
+
+		amp-cores {
+			/* Total current for the two cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "Cores";
+		};
+
+		temp-dcc {
+			/* DCC internal temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+
+		power-cores {
+			/* Total power */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "Cores";
+		};
+
+		energy {
+			/* Total energy */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 0>;
+			label = "Cores";
+		};
+	};
+
+	bus@8000000 {
+		ranges = <0x8000000 0 0x8000000 0x18000000>;
+	};
+
+	site2: hsb@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x40000000 0x3fef0000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
new file mode 100644
index 000000000000..6ef23c53d2d8
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
@@ -0,0 +1,636 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A15x2 A7x3
+ * Cortex-A15_A7 MPCore (V2P-CA15_A7)
+ *
+ * HBI-0249A
+ */
+
+/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
+
+/ {
+	model = "V2P-CA15_CA7";
+	arm,hbi = <0x249>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			cci-control-port = <&cci_control1>;
+			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <990>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			cci-control-port = <&cci_control1>;
+			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <990>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			cci-control-port = <&cci_control2>;
+			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
+			dynamic-power-coefficient = <133>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			cci-control-port = <&cci_control2>;
+			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
+			dynamic-power-coefficient = <133>;
+		};
+
+		cpu4: cpu@4 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			cci-control-port = <&cci_control2>;
+			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
+			dynamic-power-coefficient = <133>;
+		};
+
+		idle-states {
+			CLUSTER_SLEEP_BIG: cluster-sleep-big {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_SLEEP_LITTLE: cluster-sleep-little {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <500>;
+				min-residency-us = <2500>;
+			};
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Chipselect 2 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0 0x18000000 0 0x00800000>;
+			no-map;
+		};
+	};
+
+	wdt@2a490000 {
+		compatible = "arm,sp805", "arm,primecell";
+		reg = <0 0x2a490000 0 0x1000>;
+		interrupts = <0 98 4>;
+		clocks = <&oscclk6a>, <&oscclk6a>;
+		clock-names = "wdog_clk", "apb_pclk";
+	};
+
+	hdlcd@2b000000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x2b000000 0 0x1000>;
+		interrupts = <0 85 4>;
+		clocks = <&hdlcd_clk>;
+		clock-names = "pxlclk";
+	};
+
+	memory-controller@2b0a0000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0 0x2b0a0000 0 0x1000>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
+		      <0 0x2c004000 0 0x2000>,
+		      <0 0x2c006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	cci@2c090000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0x2c090000 0 0x1000>;
+		ranges = <0x0 0x0 0x2c090000 0x10000>;
+
+		cci_control1: slave-if@4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+
+		cci_control2: slave-if@5000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+
+		pmu@9000 {
+			 compatible = "arm,cci-400-pmu,r0";
+			 reg = <0x9000 0x5000>;
+			 interrupts = <0 105 4>,
+				      <0 101 4>,
+				      <0 102 4>,
+				      <0 103 4>,
+				      <0 104 4>;
+		};
+	};
+
+	memory-controller@7ffd0000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0 0x7ffd0000 0 0x1000>;
+		interrupts = <0 86 4>,
+			     <0 87 4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+	};
+
+	dma@7ff00000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0 0x7ff00000 0 0x1000>;
+		interrupts = <0 92 4>,
+			     <0 88 4>,
+			     <0 89 4>,
+			     <0 90 4>,
+			     <0 91 4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+	};
+
+        scc@7fff0000 {
+		compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
+		reg = <0 0x7fff0000 0 0x1000>;
+		interrupts = <0 95 4>;
+        };
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	pmu-a15 {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <0 68 4>,
+			     <0 69 4>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>;
+	};
+
+	pmu-a7 {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <0 128 4>,
+			     <0 129 4>,
+			     <0 130 4>;
+		interrupt-affinity = <&cpu2>,
+				     <&cpu3>,
+				     <&cpu4>;
+	};
+
+	oscclk6a: oscclk6a {
+		/* Reference 24MHz clock */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "oscclk6a";
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		clock-controller-0 {
+			/* A15 PLL 0 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		clock-controller-1 {
+			/* A15 PLL 1 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk1";
+		};
+
+		clock-controller-2 {
+			/* A7 PLL 0 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk2";
+		};
+
+		clock-controller-3 {
+			/* A7 PLL 1 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 3>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk3";
+		};
+
+		clock-controller-4 {
+			/* External AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		hdlcd_clk: clock-controller-5 {
+			/* HDLCD PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		smbclk: clock-controller-6 {
+			/* Static memory controller clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 6>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk6";
+		};
+
+		clock-controller-7 {
+			/* SYS PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 7>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk7";
+		};
+
+		clock-controller-8 {
+			/* DDR2 PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 8>;
+			freq-range = <20000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk8";
+		};
+
+		regulator-a15 {
+			/* A15 CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "A15 Vcore";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			label = "A15 Vcore";
+		};
+
+		regulator-a7 {
+			/* A7 CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "A7 Vcore";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			label = "A7 Vcore";
+		};
+
+		amp-a15 {
+			/* Total current for the two A15 cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "A15 Icore";
+		};
+
+		amp-a7 {
+			/* Total current for the three A7 cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 1>;
+			label = "A7 Icore";
+		};
+
+		temp-dcc {
+			/* DCC internal temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+
+		power-a15 {
+			/* Total power for the two A15 cores */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "A15 Pcore";
+		};
+
+		power-a7 {
+			/* Total power for the three A7 cores */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 1>;
+			label = "A7 Pcore";
+		};
+
+		energy-a15 {
+			/* Total energy for the two A15 cores */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 0>, <13 1>;
+			label = "A15 Jcore";
+		};
+
+		energy-a7 {
+			/* Total energy for the three A7 cores */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 2>, <13 3>;
+			label = "A7 Jcore";
+		};
+	};
+
+	etb@20010000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0x20010000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb_in_port: endpoint {
+					remote-endpoint = <&replicator_out_port0>;
+				};
+			};
+		};
+	};
+
+	tpiu@20030000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0x20030000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				tpiu_in_port: endpoint {
+					remote-endpoint = <&replicator_out_port1>;
+				};
+			};
+		};
+	};
+
+	replicator {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&etb_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator_in_port0: endpoint {
+					remote-endpoint = <&funnel_out_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@20040000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x20040000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel_in_port0: endpoint {
+					remote-endpoint = <&ptm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel_in_port1: endpoint {
+					remote-endpoint = <&ptm1_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel_in_port2: endpoint {
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+			/* Input port #3 is for ITM, not supported here */
+
+			port@4 {
+				reg = <4>;
+				funnel_in_port4: endpoint {
+					remote-endpoint = <&etm1_out_port>;
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+				funnel_in_port5: endpoint {
+					remote-endpoint = <&etm2_out_port>;
+				};
+			};
+		};
+	};
+
+	ptm@2201c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201c000 0 0x1000>;
+
+		cpu = <&cpu0>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				ptm0_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port0>;
+				};
+			};
+		};
+	};
+
+	ptm@2201d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201d000 0 0x1000>;
+
+		cpu = <&cpu1>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				ptm1_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port1>;
+				};
+			};
+		};
+	};
+
+	etm@2203c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203c000 0 0x1000>;
+
+		cpu = <&cpu2>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm0_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port2>;
+				};
+			};
+		};
+	};
+
+	etm@2203d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203d000 0 0x1000>;
+
+		cpu = <&cpu3>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm1_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port4>;
+				};
+			};
+		};
+	};
+
+	etm@2203e000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203e000 0 0x1000>;
+
+		cpu = <&cpu4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm2_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port5>;
+				};
+			};
+		};
+	};
+
+	smb: bus@8000000 {
+		ranges = <0x8000000 0 0x8000000 0x18000000>;
+	};
+
+	site2: hsb@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x40000000 0x3fef0000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
+
+&nor_flash {
+	/*
+	 * Unfortunately, accessing the flash disturbs the CPU idle states
+	 * (suspend) and CPU hotplug of this platform. For this reason, flash
+	 * hardware access is disabled by default on this platform alone.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts
new file mode 100644
index 000000000000..e3896253f33e
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A5x2
+ * Cortex-A5 MPCore (V2P-CA5s)
+ *
+ * HBI-0225B
+ */
+
+/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
+
+/ {
+	model = "V2P-CA5s";
+	arm,hbi = <0x225>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Chipselect 2 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0x18000000 0x00800000>;
+			no-map;
+		};
+	};
+
+	hdlcd@2a110000 {
+		compatible = "arm,hdlcd";
+		reg = <0x2a110000 0x1000>;
+		interrupts = <0 85 4>;
+		clocks = <&hdlcd_clk>;
+		clock-names = "pxlclk";
+	};
+
+	memory-controller@2a150000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0x2a150000 0x1000>;
+		clocks = <&axi_clk>;
+		clock-names = "apb_pclk";
+	};
+
+	memory-controller@2a190000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0x2a190000 0x1000>;
+		interrupts = <0 86 4>,
+			     <0 87 4>;
+		clocks = <&axi_clk>;
+		clock-names = "apb_pclk";
+	};
+
+	scu@2c000000 {
+		compatible = "arm,cortex-a5-scu";
+		reg = <0x2c000000 0x58>;
+	};
+
+	timer@2c000600 {
+		compatible = "arm,cortex-a5-twd-timer";
+		reg = <0x2c000600 0x20>;
+		interrupts = <1 13 0x304>;
+	};
+
+	timer@2c000200 {
+		compatible = "arm,cortex-a5-global-timer",
+		             "arm,cortex-a9-global-timer";
+		reg = <0x2c000200 0x20>;
+		interrupts = <1 11 0x304>;
+		clocks = <&cpu_clk>;
+	};
+
+	watchdog@2c000620 {
+		compatible = "arm,cortex-a5-twd-wdt";
+		reg = <0x2c000620 0x20>;
+		interrupts = <1 14 0x304>;
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a5-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x2c001000 0x1000>,
+		      <0x2c000100 0x100>;
+	};
+
+	L2: cache-controller@2c0f0000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x2c0f0000 0x1000>;
+		interrupts = <0 84 4>;
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <0 68 4>,
+			     <0 69 4>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		cpu_clk: clock-controller-0 {
+			/* CPU and internal AXI reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <50000000 100000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		axi_clk: clock-controller-1 {
+			/* Multiplexed AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <5000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk1";
+		};
+
+		clock-controller-2 {
+			/* DDR2 */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <80000000 120000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk2";
+		};
+
+		hdlcd_clk: clock-controller-3 {
+			/* HDLCD */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 3>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk3";
+		};
+
+		clock-controller-4 {
+			/* Test chip gate configuration */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <80000000 80000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		smbclk: clock-controller-5 {
+			/* SMB clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <25000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		temp-dcc {
+			/* DCC internal operating temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+	};
+
+	smb: bus@8000000 {
+		ranges = <0 0x8000000 0x18000000>;
+	};
+
+	site2: hsb@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
new file mode 100644
index 000000000000..43a5a4ab6ff0
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A9x4
+ * Cortex-A9 MPCore (V2P-CA9)
+ *
+ * HBI-0191B
+ */
+
+/dts-v1/;
+#include "vexpress-v2m.dtsi"
+
+/ {
+	model = "V2P-CA9";
+	arm,hbi = <0x191>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		stdout-path = &v2m_serial0;
+	};
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A9_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Chipselect 3 is physically at 0x4c000000 */
+		vram: vram@4c000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0x4c000000 0x00800000>;
+			no-map;
+		};
+	};
+
+	clcd@10020000 {
+		compatible = "arm,pl111", "arm,primecell";
+		reg = <0x10020000 0x1000>;
+		interrupt-names = "combined";
+		interrupts = <0 44 4>;
+		clocks = <&oscclk1>, <&oscclk2>;
+		clock-names = "clcdclk", "apb_pclk";
+		/* 1024x768 16bpp @65MHz */
+		max-memory-bandwidth = <95000000>;
+
+		port {
+			clcd_pads_ct: endpoint {
+				remote-endpoint = <&dvi_bridge_in_ct>;
+				arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+			};
+		};
+	};
+
+	memory-controller@100e0000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0x100e0000 0x1000>;
+		clocks = <&oscclk2>;
+		clock-names = "apb_pclk";
+	};
+
+	memory-controller@100e1000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0x100e1000 0x1000>;
+		interrupts = <0 45 4>,
+			     <0 46 4>;
+		clocks = <&oscclk2>;
+		clock-names = "apb_pclk";
+	};
+
+	timer@100e4000 {
+		compatible = "arm,sp804", "arm,primecell";
+		reg = <0x100e4000 0x1000>;
+		interrupts = <0 48 4>,
+			     <0 49 4>;
+		clocks = <&oscclk2>, <&oscclk2>, <&oscclk2>;
+		clock-names = "timer0clk", "timer1clk", "apb_pclk";
+		status = "disabled";
+	};
+
+	watchdog@100e5000 {
+		compatible = "arm,sp805", "arm,primecell";
+		reg = <0x100e5000 0x1000>;
+		interrupts = <0 51 4>;
+		clocks = <&oscclk2>, <&oscclk2>;
+		clock-names = "wdog_clk", "apb_pclk";
+	};
+
+	scu@1e000000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x1e000000 0x58>;
+	};
+
+	timer@1e000600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x1e000600 0x20>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	watchdog@1e000620 {
+		compatible = "arm,cortex-a9-twd-wdt";
+		reg = <0x1e000620 0x20>;
+		interrupts = <1 14 0xf04>;
+	};
+
+	gic: interrupt-controller@1e001000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x1e001000 0x1000>,
+		      <0x1e000100 0x100>;
+	};
+
+	L2: cache-controller@1e00a000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x1e00a000 0x1000>;
+		interrupts = <0 43 4>;
+		cache-unified;
+		cache-level = <2>;
+		arm,data-latency = <1 1 1>;
+		arm,tag-latency = <1 1 1>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 60 4>,
+			     <0 61 4>,
+			     <0 62 4>,
+			     <0 63 4>;
+		interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
+
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		oscclk0: clock-controller-0 {
+			/* ACLK clock to the AXI master port on the test chip */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <30000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "extsaxiclk";
+		};
+
+		oscclk1: clock-controller-1 {
+			/* Reference clock for the CLCD */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <10000000 80000000>;
+			#clock-cells = <0>;
+			clock-output-names = "clcdclk";
+		};
+
+		smbclk: oscclk2: clock-controller-2 {
+			/* Reference clock for the test chip internal PLLs */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <33000000 100000000>;
+			#clock-cells = <0>;
+			clock-output-names = "tcrefclk";
+		};
+
+		regulator-vd10 {
+			/* Test Chip internal logic voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "VD10";
+			regulator-always-on;
+			label = "VD10";
+		};
+
+		regulator-vd10-s2 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "VD10_S2";
+			regulator-always-on;
+			label = "VD10_S2";
+		};
+
+		regulator-vd10-s3 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 2>;
+			regulator-name = "VD10_S3";
+			regulator-always-on;
+			label = "VD10_S3";
+		};
+
+		regulator-vcc1v8 {
+			/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 3>;
+			regulator-name = "VCC1V8";
+			regulator-always-on;
+			label = "VCC1V8";
+		};
+
+		regulator-ddr2vtt {
+			/* DDR2 SDRAM VTT termination voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 4>;
+			regulator-name = "DDR2VTT";
+			regulator-always-on;
+			label = "DDR2VTT";
+		};
+
+		regulator-vcc3v3 {
+			/* Local board supply for miscellaneous logic external to the Test Chip */
+			arm,vexpress-sysreg,func = <2 5>;
+			compatible = "arm,vexpress-volt";
+			regulator-name = "VCC3V3";
+			regulator-always-on;
+			label = "VCC3V3";
+		};
+
+		amp-vd10-s2 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "VD10_S2";
+		};
+
+		amp-vd10-s3 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 1>;
+			label = "VD10_S3";
+		};
+
+		power-vd10-s2 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "PVD10_S2";
+		};
+
+		power-vd10-s3 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 1>;
+			label = "PVD10_S3";
+		};
+	};
+
+	site2: hsb@e0000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xe0000000 0x20000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
deleted file mode 100644
index a495e5821ab8..000000000000
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 370 evaluation board
- * (DB-88F6710-BP-DDR3)
- *
- *  Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "armada-370.dtsi"
-
-/ {
-	model = "Marvell Armada 370 Evaluation Board";
-	compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			i2c@11000 {
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-				clock-frequency = <100000>;
-				status = "okay";
-				audio_codec: audio-codec@4a {
-					compatible = "cirrus,cs42l51";
-					reg = <0x4a>;
-				};
-			};
-
-			audio-controller@30000 {
-				pinctrl-0 = <&i2s_pins2>;
-				pinctrl-names = "default";
-				status = "okay";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins1>;
-				pinctrl-names = "default";
-				/*
-				 * This device is disabled by default, because
-				 * using the SD card connector requires
-				 * changing the default CON40 connector
-				 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
-				 * different connector
-				 * "DB-88F6710_MPP_RGMII_SD_Jumper".
-				 */
-				status = "disabled";
-				/* No CD or WP GPIOs */
-				broken-cd;
-			};
-
-			pinctrl {
-				/*
-				 * These pins might be muxed as I2S by
-				 * the bootloader, but it conflicts
-				 * with the real I2S pins that are
-				 * muxed using i2s_pins. We must mux
-				 * those pins to a function other than
-				 * I2S.
-				 */
-				pinctrl-0 = <&hog_pins1 &hog_pins2>;
-				pinctrl-names = "default";
-
-				hog_pins1: hog-pins1 {
-					marvell,pins = "mpp6",  "mpp8", "mpp10",
-						       "mpp12", "mpp13";
-					marvell,function = "gpio";
-				};
-
-				hog_pins2: hog-pins2 {
-					marvell,pins = "mpp5", "mpp7", "mpp9";
-					marvell,function = "gpo";
-				};
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "mx25l25635e";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <50000000>;
-				};
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * both standard PCIe slots and mini-PCIe
-			 * slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-
-	sound {
-	      compatible = "marvell,a370db-audio";
-	      marvell,audio-controller = <&audio_controller>;
-	      marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>;
-	      status = "okay";
-	};
-
-	spdif_out: spdif-out {
-	      compatible = "linux,spdif-dit";
-	};
-
-	spdif_in: spdif-in {
-	      compatible = "linux,spdif-dir";
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
deleted file mode 100644
index 2b6d24e0d1e8..000000000000
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Device Tree file for Globalscale Mirabox
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "Globalscale Mirabox";
-	compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected on the PCB to a USB 3.0 XHCI controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			timer@20300 {
-				clock-frequency = <600000000>;
-				status = "okay";
-			};
-
-			pinctrl {
-				pwr_led_pin: pwr-led-pin {
-					marvell,pins = "mpp63";
-					marvell,function = "gpo";
-				};
-
-				stat_led_pins: stat-led-pins {
-					marvell,pins = "mpp64", "mpp65";
-					marvell,function = "gpio";
-				};
-			};
-
-			gpio_leds {
-				compatible = "gpio-leds";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwr_led_pin &stat_led_pins>;
-
-				green_pwr_led {
-					label = "mirabox:green:pwr";
-					gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-					default-state = "keep";
-				};
-
-				blue_stat_led {
-					label = "mirabox:blue:stat";
-					gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-
-				green_stat_led {
-					label = "mirabox:green:stat";
-					gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-			};
-
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-			ethernet@70000 {
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins3>;
-				pinctrl-names = "default";
-				status = "okay";
-				/*
-				 * No CD or WP GPIOs: SDIO interface used for
-				 * Wifi/Bluetooth chip
-				 */
-				 broken-cd;
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-				pca9505: pca9505@25 {
-					compatible = "nxp,pca9505";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x25>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x400000>;
-				};
-				partition@400000 {
-					label = "Linux";
-					reg = <0x400000 0x400000>;
-				};
-				partition@800000 {
-					label = "Filesystem";
-					reg = <0x800000 0x3f800000>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
deleted file mode 100644
index 3aebd93cc33c..000000000000
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Device Tree file for NETGEAR ReadyNAS 102
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS 102";
-	compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to Marvell SATA controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected to FL1009 USB 3.0 controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			pinctrl {
-				power_led_pin: power-led-pin {
-					marvell,pins = "mpp57";
-					marvell,function = "gpio";
-				};
-
-				sata1_led_pin: sata1-led-pin {
-					marvell,pins = "mpp15";
-					marvell,function = "gpio";
-				};
-
-				sata2_led_pin: sata2-led-pin {
-					marvell,pins = "mpp14";
-					marvell,function = "gpio";
-				};
-
-				backup_led_pin: backup-led-pin {
-					marvell,pins = "mpp56";
-					marvell,function = "gpio";
-				};
-
-				backup_button_pin: backup-button-pin {
-					marvell,pins = "mpp58";
-					marvell,function = "gpio";
-				};
-
-				power_button_pin: power-button-pin {
-					marvell,pins = "mpp62";
-					marvell,function = "gpio";
-				};
-
-				reset_button_pin: reset-button-pin {
-					marvell,pins = "mpp6";
-					marvell,function = "gpio";
-				};
-
-				poweroff: poweroff {
-					marvell,pins = "mpp8";
-					marvell,function = "gpio";
-				};
-			};
-
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-			};
-
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				clock-frequency = <100000>;
-				status = "okay";
-
-				isl12057: isl12057@68 {
-					compatible = "isil,isl12057";
-					reg = <0x68>;
-				};
-
-				g762: g762@3e {
-					compatible = "gmt,g762";
-					reg = <0x3e>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				/* Use Hardware BCH ECC */
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x180000>;  /* 1.5MB */
-					read-only;
-				};
-
-				partition@180000 {
-					label = "u-boot-env";
-					reg = <0x180000 0x20000>;    /* 128KB */
-					read-only;
-				};
-
-				partition@200000 {
-					label = "uImage";
-					reg = <0x0200000 0x600000>;    /* 6MB */
-				};
-
-				partition@800000 {
-					label = "minirootfs";
-					reg = <0x0800000 0x400000>;    /* 4MB */
-				};
-
-				/* Last MB is for the BBT, i.e. not writable */
-				partition@c00000 {
-					label = "ubifs";
-					reg = <0x0c00000 0x7400000>; /* 116MB */
-				};
-			};
-		};
-	};
-
-	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&power_led_pin
-			     &sata1_led_pin
-			     &sata2_led_pin
-			     &backup_led_pin>;
-		pinctrl-names = "default";
-
-		blue-power-led {
-			label = "rn102:blue:pwr";
-			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		green-sata1-led {
-			label = "rn102:green:sata1";
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		green-sata2-led {
-			label = "rn102:green:sata2";
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		green-backup-led {
-			label = "rn102:green:backup";
-			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&power_button_pin
-			     &reset_button_pin
-			     &backup_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-		};
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
deleted file mode 100644
index c2f414bb9aba..000000000000
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Device Tree file for NETGEAR ReadyNAS 104
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS 104";
-	compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to FL1009 USB 3.0 controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected to Marvell 88SE9215 SATA controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-
-			pinctrl {
-				poweroff: poweroff {
-					marvell,pins = "mpp60";
-					marvell,function = "gpio";
-				};
-
-				backup_button_pin: backup-button-pin {
-					marvell,pins = "mpp52";
-					marvell,function = "gpio";
-				};
-
-				power_button_pin: power-button-pin {
-					marvell,pins = "mpp62";
-					marvell,function = "gpio";
-				};
-
-				backup_led_pin: backup-led-pin {
-					marvell,pins = "mpp63";
-					marvell,function = "gpo";
-				};
-
-				power_led_pin: power-led-pin {
-					marvell,pins = "mpp64";
-					marvell,function = "gpio";
-				};
-
-				reset_button_pin: reset-button-pin {
-					marvell,pins = "mpp65";
-					marvell,function = "gpio";
-				};
-			};
-
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				clock-frequency = <100000>;
-				status = "okay";
-
-				isl12057: isl12057@68 {
-					compatible = "isil,isl12057";
-					reg = <0x68>;
-				};
-
-				g762: g762@3e {
-					compatible = "gmt,g762";
-					reg = <0x3e>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				pca9554: pca9554@23 {
-					compatible = "nxp,pca9554";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x23>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				/* Use Hardware BCH ECC */
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x180000>;  /* 1.5MB */
-					read-only;
-				};
-
-				partition@180000 {
-					label = "u-boot-env";
-					reg = <0x180000 0x20000>;    /* 128KB */
-					read-only;
-				};
-
-				partition@200000 {
-					label = "uImage";
-					reg = <0x0200000 0x600000>;    /* 6MB */
-				};
-
-				partition@800000 {
-					label = "minirootfs";
-					reg = <0x0800000 0x400000>;    /* 4MB */
-				};
-
-				/* Last MB is for the BBT, i.e. not writable */
-				partition@c00000 {
-					label = "ubifs";
-					reg = <0x0c00000 0x7400000>; /* 116MB */
-				};
-			};
-		};
-	};
-
-	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&backup_led_pin &power_led_pin>;
-		pinctrl-names = "default";
-
-		blue-backup-led {
-			label = "rn104:blue:backup";
-			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		blue-power-led {
-			label = "rn104:blue:pwr";
-			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "keep";
-		};
-
-		blue-sata1-led {
-			label = "rn104:blue:sata1";
-			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		blue-sata2-led {
-			label = "rn104:blue:sata2";
-			gpios = <&pca9554 1 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		blue-sata3-led {
-			label = "rn104:blue:sata3";
-			gpios = <&pca9554 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		blue-sata4-led {
-			label = "rn104:blue:sata4";
-			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&backup_button_pin
-			     &power_button_pin
-			     &reset_button_pin>;
-		pinctrl-names = "default";
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-		};
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
deleted file mode 100644
index f57a8f841498..000000000000
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 370 Reference Design board
- * (RD-88F6710-A1)
- *
- *  Copied from arch/arm/boot/dts/armada-370-db.dts
- *
- *  Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "Marvell Armada 370 Reference Design";
-	compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Internal mini-PCIe connector */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				fan_pins: fan-pins {
-					marvell,pins = "mpp8";
-					marvell,function = "gpio";
-				};
-
-				led_pins: led-pins {
-					marvell,pins = "mpp32";
-					marvell,function = "gpio";
-				};
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "sgmii";
-			};
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins1>;
-				pinctrl-names = "default";
-				status = "okay";
-				/* No CD or WP GPIOs */
-				broken-cd;
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			gpio-keys {
-				compatible = "gpio-keys";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				button@1 {
-					label = "Software Button";
-					linux,code = <KEY_POWER>;
-					gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-				};
-			};
-
-			gpio-fan {
-				compatible = "gpio-fan";
-				gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-				gpio-fan,speed-map = <0 0 3000 1>;
-				pinctrl-0 = <&fan_pins>;
-				pinctrl-names = "default";
-			};
-
-			gpio_leds {
-				compatible = "gpio-leds";
-				pinctrl-names = "default";
-				pinctrl-0 = <&led_pins>;
-
-				sw_led {
-					label = "370rd:green:sw";
-					gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-					default-state = "keep";
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
-			};
-		};
-	};
- };
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
deleted file mode 100644
index 83286ec9702c..000000000000
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 370 and Armada XP SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Ben Dooks <ben.dooks@codethink.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are common to the Armada
- * 370 and Armada XP SoC.
- */
-
-/include/ "skeleton64.dtsi"
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	model = "Marvell Armada 370 and XP SoC";
-	compatible = "marvell,armada-370-xp";
-
-	aliases {
-		eth0 = &eth0;
-		eth1 = &eth1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "marvell,sheeva-v7";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	soc {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-		interrupt-parent = <&mpic>;
-		pcie-mem-aperture = <0xf8000000 0x7e00000>;
-		pcie-io-aperture  = <0xffe00000 0x100000>;
-
-		devbus-bootcs {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs0 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs1 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs2 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs3 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
-
-			rtc@10300 {
-				compatible = "marvell,orion-rtc";
-				reg = <0x10300 0x20>;
-				interrupts = <50>;
-			};
-
-			spi0: spi@10600 {
-				compatible = "marvell,armada-370-spi", "marvell,orion-spi";
-				reg = <0x10600 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <30>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-370-spi", "marvell,orion-spi";
-				reg = <0x10680 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <92>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <31>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <32>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			serial@12000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <41>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-			serial@12100 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <42>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			coredivclk: corediv-clock@18740 {
-				compatible = "marvell,armada-370-corediv-clock";
-				reg = <0x18740 0xc>;
-				#clock-cells = <1>;
-				clocks = <&mainpll>;
-				clock-output-names = "nand";
-			};
-
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
-			};
-
-			mpic: interrupt-controller@20000 {
-				compatible = "marvell,mpic";
-				#interrupt-cells = <1>;
-				#size-cells = <1>;
-				interrupt-controller;
-				msi-controller;
-			};
-
-			coherency-fabric@20200 {
-				compatible = "marvell,coherency-fabric";
-				reg = <0x20200 0xb0>, <0x21010 0x1c>;
-			};
-
-			timer@20300 {
-				reg = <0x20300 0x30>, <0x21040 0x30>;
-				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
-			};
-
-			watchdog@20300 {
-				reg = <0x20300 0x34>, <0x20704 0x4>;
-			};
-
-			pmsu@22000 {
-				compatible = "marvell,armada-370-pmsu";
-				reg = <0x22000 0x1000>;
-			};
-
-			usb@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x50000 0x500>;
-				interrupts = <45>;
-				status = "disabled";
-			};
-
-			usb@51000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x51000 0x500>;
-				interrupts = <46>;
-				status = "disabled";
-			};
-
-			eth0: ethernet@70000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x70000 0x4000>;
-				interrupts = <8>;
-				clocks = <&gateclk 4>;
-				status = "disabled";
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,orion-mdio";
-				reg = <0x72004 0x4>;
-				clocks = <&gateclk 4>;
-			};
-
-			eth1: ethernet@74000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x74000 0x4000>;
-				interrupts = <10>;
-				clocks = <&gateclk 3>;
-				status = "disabled";
-			};
-
-			sata@a0000 {
-				compatible = "marvell,armada-370-sata";
-				reg = <0xa0000 0x5000>;
-				interrupts = <55>;
-				clocks = <&gateclk 15>, <&gateclk 30>;
-				clock-names = "0", "1";
-				status = "disabled";
-			};
-
-			nand@d0000 {
-				compatible = "marvell,armada370-nand";
-				reg = <0xd0000 0x54>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				interrupts = <113>;
-				clocks = <&coredivclk 0>;
-				status = "disabled";
-			};
-
-			mvsdio@d4000 {
-				compatible = "marvell,orion-sdio";
-				reg = <0xd4000 0x200>;
-				interrupts = <54>;
-				clocks = <&gateclk 17>;
-				bus-width = <4>;
-				cap-sdio-irq;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				status = "disabled";
-			};
-		};
-	};
-
-	clocks {
-		/* 2 GHz fixed main PLL */
-		mainpll: mainpll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <2000000000>;
-		};
-	};
- };
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
deleted file mode 100644
index 6b3c23b1e138..000000000000
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 370 family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Contains definitions specific to the Armada 370 SoC that are not
- * common to all Armada SoCs.
- */
-
-#include "armada-370-xp.dtsi"
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "Marvell Armada 370 family SoC";
-	compatible = "marvell,armada370", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-	soc {
-		compatible = "marvell,armada370-mbus", "simple-bus";
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
-		};
-
-		pcie-controller {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x08, 0xe8) 0       1 0 /* Port 1.0 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x08, 0xe0) 0       1 0 /* Port 1.0 IO  */>;
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-                                ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-                                          0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			L2: l2-cache {
-				compatible = "marvell,aurora-outer-cache";
-				reg = <0x08000 0x1000>;
-				cache-id-part = <0x100>;
-				wt-override;
-			};
-
-			i2c0: i2c@11000 {
-				reg = <0x11000 0x20>;
-			};
-
-			i2c1: i2c@11100 {
-				reg = <0x11100 0x20>;
-			};
-
-			system-controller@18200 {
-				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x100>;
-			};
-
-			pinctrl {
-				compatible = "marvell,mv88f6710-pinctrl";
-				reg = <0x18000 0x38>;
-
-				sdio_pins1: sdio-pins1 {
-					marvell,pins = "mpp9",  "mpp11", "mpp12",
-							"mpp13", "mpp14", "mpp15";
-					marvell,function = "sd0";
-				};
-
-				sdio_pins2: sdio-pins2 {
-					marvell,pins = "mpp47", "mpp48", "mpp49",
-							"mpp50", "mpp51", "mpp52";
-					marvell,function = "sd0";
-				};
-
-				sdio_pins3: sdio-pins3 {
-					marvell,pins = "mpp48", "mpp49", "mpp50",
-							"mpp51", "mpp52", "mpp53";
-					marvell,function = "sd0";
-				};
-
-				i2c0_pins: i2c0-pins {
-					marvell,pins = "mpp2", "mpp3";
-					marvell,function = "i2c0";
-				};
-
-				i2s_pins1: i2s-pins1 {
-					marvell,pins = "mpp5", "mpp6", "mpp7",
-						       "mpp8", "mpp9", "mpp10",
-						       "mpp12", "mpp13";
-					marvell,function = "audio";
-				};
-
-				i2s_pins2: i2s-pins2 {
-					marvell,pins = "mpp49", "mpp47", "mpp50",
-						       "mpp59", "mpp57", "mpp61",
-						       "mpp62", "mpp60", "mpp58";
-					marvell,function = "audio";
-				};
-
-				mdio_pins: mdio-pins {
-					marvell,pins = "mpp17", "mpp18";
-					marvell,function = "ge";
-				};
-
-				ge0_rgmii_pins: ge0-rgmii-pins {
-					marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
-						       "mpp9", "mpp10", "mpp11", "mpp12",
-						       "mpp13", "mpp14", "mpp15", "mpp16";
-					marvell,function = "ge0";
-				};
-
-				ge1_rgmii_pins: ge1-rgmii-pins {
-					marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
-						       "mpp23", "mpp24", "mpp25", "mpp26",
-						       "mpp27", "mpp28", "mpp29", "mpp30";
-					marvell,function = "ge1";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-370-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			coreclk: mvebu-sar@18230 {
-				compatible = "marvell,armada-370-core-clock";
-				reg = <0x18230 0x08>;
-				#clock-cells = <1>;
-			};
-
-			thermal@18300 {
-				compatible = "marvell,armada370-thermal";
-				reg = <0x18300 0x4
-					0x18304 0x4>;
-				status = "okay";
-			};
-
-			sscg@18330 {
-				reg = <0x18330 0x4>;
-			};
-
-			interrupt-controller@20000 {
-				reg = <0x20a00 0x1d0>, <0x21870 0x58>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-370-timer";
-				clocks = <&coreclk 2>;
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-370-wdt";
-				clocks = <&coreclk 2>;
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x8>;
-			};
-
-			audio_controller: audio-controller@30000 {
-				compatible = "marvell,armada370-audio";
-				reg = <0x30000 0x4000>;
-				interrupts = <93>;
-				clocks = <&gateclk 0>;
-				clock-names = "internal";
-				status = "disabled";
-			};
-
-			usb@50000 {
-				clocks = <&coreclk 0>;
-			};
-
-			usb@51000 {
-				clocks = <&coreclk 0>;
-			};
-
-			xor@60800 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60A00 0x100>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <51>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <52>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			xor@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <94>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <95>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
deleted file mode 100644
index 929ae00b4063..000000000000
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 375 evaluation board
- * (DB-88F6720)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-375.dtsi"
-
-/ {
-	model = "Marvell Armada 375 Development Board";
-	compatible = "marvell,a375-db", "marvell,armada375";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			spi@10600 {
-				pinctrl-0 = <&spi0_pins>;
-				pinctrl-names = "default";
-				/*
-				 * SPI conflicts with NAND, so we disable it
-				 * here, and select NAND as the enabled device
-				 * by default.
-				 */
-				status = "disabled";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-			};
-
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <100000>;
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			pinctrl {
-				sdio_st_pins: sdio-st-pins {
-					marvell,pins = "mpp44", "mpp45";
-					marvell,function = "gpio";
-				};
-			};
-
-			sata@a0000 {
-				status = "okay";
-				nr-ports = <2>;
-			};
-
-			nand: nand@d0000 {
-				pinctrl-0 = <&nand_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
-			};
-
-			usb@54000 {
-				status = "okay";
-			};
-
-			usb3@58000 {
-				status = "okay";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins &sdio_st_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-				wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <3>;
-				};
-			};
-
-			ethernet@f0000 {
-				status = "okay";
-
-				eth0@c4000 {
-					status = "okay";
-					phy = <&phy0>;
-					phy-mode = "rgmii-id";
-				};
-
-				eth1@c5000 {
-					status = "okay";
-					phy = <&phy3>;
-					phy-mode = "gmii";
-				};
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
deleted file mode 100644
index de6571445cef..000000000000
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ /dev/null
@@ -1,559 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 375 family SoC
- *
- * Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	model = "Marvell Armada 375 family SoC";
-	compatible = "marvell,armada375";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		ethernet0 = &eth0;
-		ethernet1 = &eth1;
-	};
-
-	clocks {
-		/* 2 GHz fixed main PLL */
-		mainpll: mainpll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <2000000000>;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-375-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	soc {
-		compatible = "marvell,armada375-mbus", "marvell,armada370-mbus", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-		interrupt-parent = <&gic>;
-		pcie-mem-aperture = <0xe0000000 0x8000000>;
-		pcie-io-aperture  = <0xe8000000 0x100000>;
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
-		};
-
-		devbus-bootcs {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs0 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs1 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs2 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs3 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
-
-			L2: cache-controller@8000 {
-				compatible = "arm,pl310-cache";
-				reg = <0x8000 0x1000>;
-				cache-unified;
-				cache-level = <2>;
-			};
-
-			scu@c000 {
-				compatible = "arm,cortex-a9-scu";
-				reg = <0xc000 0x58>;
-			};
-
-			timer@c600 {
-				compatible = "arm,cortex-a9-twd-timer";
-				reg = <0xc600 0x20>;
-				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
-				clocks = <&coreclk 2>;
-			};
-
-			gic: interrupt-controller@d000 {
-				compatible = "arm,cortex-a9-gic";
-				#interrupt-cells = <3>;
-				#size-cells = <0>;
-				interrupt-controller;
-				reg = <0xd000 0x1000>,
-				      <0xc100 0x100>;
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,orion-mdio";
-				reg = <0xc0054 0x4>;
-				clocks = <&gateclk 19>;
-			};
-
-			/* Network controller */
-			ethernet@f0000 {
-				compatible = "marvell,armada-375-pp2";
-				reg = <0xf0000 0xa000>, /* Packet Processor regs */
-				      <0xc0000 0x3060>, /* LMS regs */
-				      <0xc4000 0x100>,  /* eth0 regs */
-				      <0xc5000 0x100>;  /* eth1 regs */
-				clocks = <&gateclk 3>, <&gateclk 19>;
-				clock-names = "pp_clk", "gop_clk";
-				status = "disabled";
-
-				eth0: eth0@c4000 {
-					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <0>;
-					status = "disabled";
-				};
-
-				eth1: eth1@c5000 {
-					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <1>;
-					status = "disabled";
-				};
-			};
-
-			rtc@10300 {
-				compatible = "marvell,orion-rtc";
-				reg = <0x10300 0x20>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			spi0: spi@10600 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			serial@12000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			serial@12100 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			pinctrl {
-				compatible = "marvell,mv88f6720-pinctrl";
-				reg = <0x18000 0x24>;
-
-				i2c0_pins: i2c0-pins {
-					marvell,pins = "mpp14",  "mpp15";
-					marvell,function = "i2c0";
-				};
-
-				i2c1_pins: i2c1-pins {
-					marvell,pins = "mpp61",  "mpp62";
-					marvell,function = "i2c1";
-				};
-
-				nand_pins: nand-pins {
-					marvell,pins = "mpp0", "mpp1", "mpp2",
-						"mpp3", "mpp4", "mpp5",
-						"mpp6", "mpp7", "mpp8",
-						"mpp9", "mpp10", "mpp11",
-						"mpp12", "mpp13";
-					marvell,function = "nand";
-				};
-
-				sdio_pins: sdio-pins {
-					marvell,pins = "mpp24",  "mpp25", "mpp26",
-						     "mpp27", "mpp28", "mpp29";
-					marvell,function = "sd";
-				};
-
-				spi0_pins: spi0-pins {
-					marvell,pins = "mpp0",  "mpp1", "mpp4",
-						     "mpp5", "mpp8", "mpp9";
-					marvell,function = "spi0";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			system-controller@18200 {
-				compatible = "marvell,armada-375-system-controller";
-				reg = <0x18200 0x100>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-375-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
-			};
-
-			mpic: interrupt-controller@20000 {
-				compatible = "marvell,mpic";
-				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-				#interrupt-cells = <1>;
-				#size-cells = <1>;
-				interrupt-controller;
-				msi-controller;
-				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
-				reg = <0x20300 0x30>, <0x21040 0x30>;
-				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-						      <&mpic 5>,
-						      <&mpic 6>;
-				clocks = <&coreclk 0>;
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-375-wdt";
-				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
-				clocks = <&coreclk 0>;
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x10>;
-			};
-
-			coherency-fabric@21010 {
-				compatible = "marvell,armada-375-coherency-fabric";
-				reg = <0x21010 0x1c>;
-			};
-
-			usb@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x50000 0x500>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 18>;
-				status = "disabled";
-			};
-
-			usb@54000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x54000 0x500>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-
-			usb3@58000 {
-				compatible = "marvell,armada-375-xhci";
-				reg = <0x58000 0x20000>,<0x5b880 0x80>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 16>;
-				status = "disabled";
-			};
-
-			xor@60800 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60A00 0x100>;
-				clocks = <&gateclk 22>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			xor@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gateclk 23>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			sata@a0000 {
-				compatible = "marvell,orion-sata";
-				reg = <0xa0000 0x5000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 14>, <&gateclk 20>;
-				clock-names = "0", "1";
-				status = "disabled";
-			};
-
-			nand@d0000 {
-				compatible = "marvell,armada370-nand";
-				reg = <0xd0000 0x54>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			mvsdio@d4000 {
-				compatible = "marvell,orion-sdio";
-				reg = <0xd4000 0x200>;
-				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 17>;
-				bus-width = <4>;
-				cap-sdio-irq;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				status = "disabled";
-			};
-
-			thermal@e8078 {
-				compatible = "marvell,armada375-thermal";
-				reg = <0xe8078 0x4>, <0xe807c 0x8>;
-				status = "okay";
-			};
-
-			coreclk: mvebu-sar@e8204 {
-				compatible = "marvell,armada-375-core-clock";
-				reg = <0xe8204 0x04>;
-				#clock-cells = <1>;
-			};
-
-			coredivclk: corediv-clock@e8250 {
-				compatible = "marvell,armada-375-corediv-clock";
-				reg = <0xe8250 0xc>;
-				#clock-cells = <1>;
-				clocks = <&mainpll>;
-				clock-output-names = "nand";
-			};
-		};
-
-		pcie-controller {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
deleted file mode 100644
index 4173a8ab34e7..000000000000
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 380 SoC.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "armada-38x.dtsi"
-
-/ {
-	model = "Marvell Armada 380 family SoC";
-	compatible = "marvell,armada380";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-380-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-	};
-
-	soc {
-		internal-regs {
-			pinctrl {
-				compatible = "marvell,mv88f6810-pinctrl";
-				reg = <0x18000 0x20>;
-			};
-		};
-
-		pcie-controller {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
-
-			/* x1 port */
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts
deleted file mode 100644
index 1af886f1e486..000000000000
--- a/arch/arm/boot/dts/armada-385-db.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 385 evaluation board
- * (DB-88F6820)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "armada-385.dtsi"
-
-/ {
-	model = "Marvell Armada 385 Development Board";
-	compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "w25q32";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "ok";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			sata@a8000 {
-				status = "okay";
-			};
-
-			sata@e0000 {
-				status = "okay";
-			};
-
-			flash@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
-			};
-
-			sdhci@d8000 {
-				clock-frequency = <200000000>;
-				broken-cd;
-				wp-inverted;
-				bus-width = <8>;
-				status = "okay";
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				status = "okay";
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts
deleted file mode 100644
index aaca2861dc87..000000000000
--- a/arch/arm/boot/dts/armada-385-rd.dts
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 385 Reference Design board
- * (RD-88F6820-AP)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "armada-385.dtsi"
-
-/ {
-	model = "Marvell Armada 385 Reference Design";
-	compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * One PCIe units is accessible through
-			 * standard PCIe slot on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
deleted file mode 100644
index 6283d7912f71..000000000000
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 385 SoC.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "armada-38x.dtsi"
-
-/ {
-	model = "Marvell Armada 385 family SoC";
-	compatible = "marvell,armada385", "marvell,armada380";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-380-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	soc {
-		internal-regs {
-			pinctrl {
-				compatible = "marvell,mv88f6820-pinctrl";
-				reg = <0x18000 0x20>;
-			};
-		};
-
-		pcie-controller {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
-
-			/*
-			 * This port can be either x4 or x1. When
-			 * configured in x4 by the bootloader, then
-			 * pcie@4,0 is not available.
-			 */
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			/*
-			 * x1 port only available when pcie@1,0 is
-			 * configured as a x1 port
-			 */
-			pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <3>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
deleted file mode 100644
index 242d0ecc99f3..000000000000
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ /dev/null
@@ -1,466 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 38x family of SoCs.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	model = "Marvell Armada 38x family SoC";
-	compatible = "marvell,armada380";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		eth0 = &eth0;
-		eth1 = &eth1;
-		eth2 = &eth2;
-	};
-
-	soc {
-		compatible = "marvell,armada380-mbus", "marvell,armada370-mbus",
-			     "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-		interrupt-parent = <&gic>;
-		pcie-mem-aperture = <0xe0000000 0x8000000>;
-		pcie-io-aperture  = <0xe8000000 0x100000>;
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
-		};
-
-		devbus-bootcs {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs0 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs1 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs2 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs3 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
-
-			L2: cache-controller@8000 {
-				compatible = "arm,pl310-cache";
-				reg = <0x8000 0x1000>;
-				cache-unified;
-				cache-level = <2>;
-			};
-
-			scu@c000 {
-				compatible = "arm,cortex-a9-scu";
-				reg = <0xc000 0x58>;
-			};
-
-			timer@c600 {
-				compatible = "arm,cortex-a9-twd-timer";
-				reg = <0xc600 0x20>;
-				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
-				clocks = <&coreclk 2>;
-			};
-
-			gic: interrupt-controller@d000 {
-				compatible = "arm,cortex-a9-gic";
-				#interrupt-cells = <3>;
-				#size-cells = <0>;
-				interrupt-controller;
-				reg = <0xd000 0x1000>,
-				      <0xc100 0x100>;
-			};
-
-			spi0: spi@10600 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			serial@12000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			serial@12100 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			pinctrl {
-				compatible = "marvell,mv88f6820-pinctrl";
-				reg = <0x18000 0x20>;
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <28>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			system-controller@18200 {
-				compatible = "marvell,armada-380-system-controller",
-					     "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x100>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-380-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			coreclk: mvebu-sar@18600 {
-				compatible = "marvell,armada-380-core-clock";
-				reg = <0x18600 0x04>;
-				#clock-cells = <1>;
-			};
-
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
-			};
-
-			mpic: interrupt-controller@20000 {
-				compatible = "marvell,mpic";
-				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-				#interrupt-cells = <1>;
-				#size-cells = <1>;
-				interrupt-controller;
-				msi-controller;
-				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-380-timer",
-					     "marvell,armada-xp-timer";
-				reg = <0x20300 0x30>, <0x21040 0x30>;
-				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-						      <&mpic 5>,
-						      <&mpic 6>;
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-380-wdt";
-				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x10>;
-			};
-
-			mpcore-soc-ctrl@20d20 {
-				compatible = "marvell,armada-380-mpcore-soc-ctrl";
-				reg = <0x20d20 0x6c>;
-			};
-
-			coherency-fabric@21010 {
-				compatible = "marvell,armada-380-coherency-fabric";
-				reg = <0x21010 0x1c>;
-			};
-
-			pmsu@22000 {
-				compatible = "marvell,armada-380-pmsu";
-				reg = <0x22000 0x1000>;
-			};
-
-			eth1: ethernet@30000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x30000 0x4000>;
-				interrupts-extended = <&mpic 10>;
-				clocks = <&gateclk 3>;
-				status = "disabled";
-			};
-
-			eth2: ethernet@34000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x34000 0x4000>;
-				interrupts-extended = <&mpic 12>;
-				clocks = <&gateclk 2>;
-				status = "disabled";
-			};
-
-			usb@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x58000 0x500>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 18>;
-				status = "disabled";
-			};
-
-			xor@60800 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60a00 0x100>;
-				clocks = <&gateclk 22>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			xor@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gateclk 28>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			eth0: ethernet@70000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x70000 0x4000>;
-				interrupts-extended = <&mpic 8>;
-				clocks = <&gateclk 4>;
-				status = "disabled";
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,orion-mdio";
-				reg = <0x72004 0x4>;
-				clocks = <&gateclk 4>;
-			};
-
-			sata@a8000 {
-				compatible = "marvell,armada-380-ahci";
-				reg = <0xa8000 0x2000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 15>;
-				status = "disabled";
-			};
-
-			sata@e0000 {
-				compatible = "marvell,armada-380-ahci";
-				reg = <0xe0000 0x2000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 30>;
-				status = "disabled";
-			};
-
-			coredivclk: clock@e4250 {
-				compatible = "marvell,armada-380-corediv-clock";
-				reg = <0xe4250 0xc>;
-				#clock-cells = <1>;
-				clocks = <&mainpll>;
-				clock-output-names = "nand";
-			};
-
-			thermal@e8078 {
-				compatible = "marvell,armada380-thermal";
-				reg = <0xe4078 0x4>, <0xe4074 0x4>;
-				status = "okay";
-			};
-
-			flash@d0000 {
-				compatible = "marvell,armada370-nand";
-				reg = <0xd0000 0x54>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coredivclk 0>;
-				status = "disabled";
-			};
-
-			sdhci@d8000 {
-				compatible = "marvell,armada-380-sdhci";
-				reg = <0xd8000 0x1000>, <0xdc000 0x100>;
-				interrupts = <0 25 0x4>;
-				clocks = <&gateclk 17>;
-				mrvl,clk-delay-cycles = <0x1F>;
-				status = "disabled";
-			};
-
-			usb3@f0000 {
-				compatible = "marvell,armada-380-xhci";
-				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			usb3@f8000 {
-				compatible = "marvell,armada-380-xhci";
-				reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-		};
-	};
-
-	clocks {
-		/* 2 GHz fixed main PLL */
-		mainpll: mainpll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <2000000000>;
-		};
-
-		/* 25 MHz reference crystal */
-		refclk: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
deleted file mode 100644
index a55a97a70505..000000000000
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Device Tree file for Marvell RD-AXPWiFiAP.
- *
- * Note: this board is shipped with a new generation boot loader that
- * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
- * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
- * used.
- *
- * Copyright (C) 2013 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "Marvell RD-AXPWiFiAP";
-	compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* First mini-PCIe port */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Second mini-PCIe port */
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-
-			/* Renesas uPD720202 USB 3.0 controller */
-			pcie@3,0 {
-				/* Port 0, Lane 3 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				pinctrl-0 = <&pmx_phy_int>;
-				pinctrl-names = "default";
-
-				pmx_ge0: pmx-ge0 {
-					marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
-						       "mpp4", "mpp5", "mpp6", "mpp7",
-						       "mpp8", "mpp9", "mpp10", "mpp11";
-					marvell,function = "ge0";
-				};
-
-				pmx_ge1: pmx-ge1 {
-					marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
-						       "mpp16", "mpp17", "mpp18", "mpp19",
-						       "mpp20", "mpp21", "mpp22", "mpp23";
-					marvell,function = "ge1";
-				};
-
-				pmx_keys: pmx-keys {
-					marvell,pins = "mpp33";
-					marvell,function = "gpio";
-				};
-
-				pmx_spi: pmx-spi {
-					marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
-					marvell,function = "spi";
-				};
-
-				pmx_phy_int: pmx-phy-int {
-					marvell,pins = "mpp32";
-					marvell,function = "gpio";
-				};
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			serial@12100 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <1>;
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&pmx_ge0>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				pinctrl-0 = <&pmx_ge1>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			spi0: spi@10600 {
-				status = "okay";
-				pinctrl-0 = <&pmx_spi>;
-				pinctrl-names = "default";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_keys>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "Factory Reset Button";
-			linux,code = <KEY_SETUP>;
-			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
deleted file mode 100644
index 42ddb2864365..000000000000
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * Device Tree file for Marvell Armada XP evaluation board
- * (DB-78460-BP)
- *
- * Copyright (C) 2012-2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-  *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include "armada-xp-mv78460.dtsi"
-
-/ {
-	model = "Marvell Armada XP Evaluation Board";
-	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
-
-		devbus-bootcs {
-			status = "okay";
-
-			/* Device Bus parameters are required */
-
-			/* Read parameters */
-			devbus,bus-width    = <16>;
-			devbus,turn-off-ps  = <60000>;
-			devbus,badr-skew-ps = <0>;
-			devbus,acc-first-ps = <124000>;
-			devbus,acc-next-ps  = <248000>;
-			devbus,rd-setup-ps  = <0>;
-			devbus,rd-hold-ps   = <0>;
-
-			/* Write parameters */
-			devbus,sync-enable = <0>;
-			devbus,wr-high-ps  = <60000>;
-			devbus,wr-low-ps   = <60000>;
-			devbus,ale-wr-ps   = <60000>;
-
-			/* NOR 16 MiB */
-			nor@0 {
-				compatible = "cfi-flash";
-				reg = <0 0x1000000>;
-				bank-width = <2>;
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * All 6 slots are physically present as
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-			pcie@3,0 {
-				/* Port 0, Lane 2 */
-				status = "okay";
-			};
-			pcie@4,0 {
-				/* Port 0, Lane 3 */
-				status = "okay";
-			};
-			pcie@9,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-			pcie@10,0 {
-				/* Port 3, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			serial@12200 {
-				status = "okay";
-			};
-			serial@12300 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <25>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <27>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy2>;
-				phy-mode = "sgmii";
-			};
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy3>;
-				phy-mode = "sgmii";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				/* No CD or WP GPIOs */
-				broken-cd;
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			usb@52000 {
-				status = "okay";
-			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "m25p64";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
deleted file mode 100644
index 0478c55ca656..000000000000
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * Device Tree file for Marvell Armada XP development board
- * (DB-MV784MP-GP)
- *
- * Copyright (C) 2013-2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include "armada-xp-mv78460.dtsi"
-
-/ {
-	model = "Marvell Armada XP Development Board DB-MV784MP-GP";
-	compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		/*
-                 * 8 GB of plug-in RAM modules by default.The amount
-                 * of memory available can be changed by the
-                 * bootloader according the size of the module
-                 * actually plugged. However, memory between
-                 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
-                 * the address range used for I/O (internal registers,
-                 * MBus windows).
-		 */
-		reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
-		      <0x00000001 0x00000000 0x00000001 0x00000000>;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
-
-		devbus-bootcs {
-			status = "okay";
-
-			/* Device Bus parameters are required */
-
-			/* Read parameters */
-			devbus,bus-width    = <16>;
-			devbus,turn-off-ps  = <60000>;
-			devbus,badr-skew-ps = <0>;
-			devbus,acc-first-ps = <124000>;
-			devbus,acc-next-ps  = <248000>;
-			devbus,rd-setup-ps  = <0>;
-			devbus,rd-hold-ps   = <0>;
-
-			/* Write parameters */
-			devbus,sync-enable = <0>;
-			devbus,wr-high-ps  = <60000>;
-			devbus,wr-low-ps   = <60000>;
-			devbus,ale-wr-ps   = <60000>;
-
-			/* NOR 16 MiB */
-			nor@0 {
-				compatible = "cfi-flash";
-				reg = <0 0x1000000>;
-				bank-width = <2>;
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * The 3 slots are physically present as
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@9,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-			pcie@10,0 {
-				/* Port 3, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			serial@12200 {
-				status = "okay";
-			};
-			serial@12300 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <16>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <17>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <18>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <19>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "qsgmii";
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "qsgmii";
-			};
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy2>;
-				phy-mode = "qsgmii";
-			};
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy3>;
-				phy-mode = "qsgmii";
-			};
-
-			/* Front-side USB slot */
-			usb@50000 {
-				status = "okay";
-			};
-
-			/* Back-side USB slot */
-			usb@51000 {
-				status = "okay";
-			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
deleted file mode 100644
index 469cf7137595..000000000000
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Device Tree file for Lenovo Iomega ix4-300d
- *
- * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "Lenovo Iomega ix4-300d";
-	compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230",
-		     "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-		stdout-path = "/soc/internal-regs/serial@12000";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x20000000>; /* 512MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Quad port sata: Marvell 88SX7042 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* USB 3.0 xHCI controller: NEC D720200F1 */
-			pcie@5,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				poweroff_pin: poweroff-pin {
-					marvell,pins = "mpp24";
-					marvell,function = "gpio";
-				};
-
-				power_button_pin: power-button-pin {
-					marvell,pins = "mpp44";
-					marvell,function = "gpio";
-				};
-
-				reset_button_pin: reset-button-pin {
-					marvell,pins = "mpp45";
-					marvell,function = "gpio";
-				};
-				select_button_pin: select-button-pin {
-					marvell,pins = "mpp41";
-					marvell,function = "gpio";
-				};
-
-				scroll_button_pin: scroll-button-pin {
-					marvell,pins = "mpp42";
-					marvell,function = "gpio";
-				};
-
-				hdd_led_pin: hdd-led-pin {
-					marvell,pins = "mpp26";
-					marvell,function = "gpio";
-				};
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				clock-frequency = <400000>;
-				status = "okay";
-
-				adt7473@2e {
-					compatible = "adi,adt7473";
-					reg = <0x2e>;
-				};
-
-				pcf8563@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0xe0000>;
-					read-only;
-				};
-
-				partition@e0000 {
-					label = "u-boot-env";
-					reg = <0xe0000 0x20000>;
-					read-only;
-				};
-
-				partition@100000 {
-					label = "u-boot-env2";
-					reg = <0x100000 0x20000>;
-					read-only;
-				};
-
-				partition@120000 {
-					label = "zImage";
-					reg = <0x120000 0x400000>;
-				};
-
-				partition@520000 {
-					label = "initrd";
-					reg = <0x520000 0x400000>;
-				};
-
-				partition@xE00000 {
-					label = "boot";
-					reg = <0xE00000 0x3F200000>;
-				};
-
-				partition@flash {
-					label = "flash";
-					reg = <0x0 0x40000000>;
-				};
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&power_button_pin &reset_button_pin
-			&select_button_pin &scroll_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-
-		select-button {
-			label = "Select Button";
-			linux,code = <BTN_SELECT>;
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-
-		scroll-button {
-			label = "Scroll Button";
-			linux,code = <KEY_SCROLLDOWN>;
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	spi3 {
-		compatible = "spi-gpio";
-		status = "okay";
-		gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>;
-		gpio-mosi = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
-		cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio_spi: gpio_spi@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <2>;
-			spi-max-frequency = <100000>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&hdd_led_pin>;
-		pinctrl-names = "default";
-
-		hdd-led {
-			label = "ix4-300d:hdd:blue";
-			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		power-led {
-			label = "ix4-300d:power:white";
-			gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
-			/* init blinking while booting */
-			linux,default-trigger = "timer";
-			default-state = "on";
-		};
-
-		sysfail-led {
-			label = "ix4-300d:sysfail:red";
-			gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		sys-led {
-			label = "ix4-300d:sys:blue";
-			gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		hddfail-led {
-			label = "ix4-300d:hddfail:red";
-			gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-	};
-
-	/*
-	 * Warning: you need both eth1 & 0 PHY initialized (i.e having
-	 * them up does the tweak) for poweroff to shutdown otherwise it
-	 * reboots
-	 */
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff_pin>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
deleted file mode 100644
index 7e291e2ef4b3..000000000000
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Device Tree file for Marvell Armada XP Matrix board
- *
- * Copyright (C) 2013 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "armada-xp-mv78460.dtsi"
-
-/ {
-	model = "Marvell Armada XP Matrix Board";
-	compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		/*
-		 * This board has 4 GB of RAM, but the last 256 MB of
-		 * RAM are not usable due to the overlap with the MBus
-		 * Window address range
-		 */
-		reg = <0 0x00000000 0 0xf0000000>;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			serial@12200 {
-				status = "okay";
-			};
-			serial@12300 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy-mode = "sgmii";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			pcie-controller {
-				status = "okay";
-
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
deleted file mode 100644
index 2592e1c13560..000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Contains definitions specific to the Armada XP MV78230 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78230 SoC";
-	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
-		 * configured as x4 or quad x1 lanes. One unit is
-		 * x1 only.
-		 */
-		pcie-controller {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				compatible = "marvell,mv78230-pinctrl";
-				reg = <0x18000 0x38>;
-
-				sdio_pins: sdio-pins {
-					marvell,pins = "mpp30", "mpp31", "mpp32",
-						       "mpp33", "mpp34", "mpp35";
-					marvell,function = "sd0";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <17>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
deleted file mode 100644
index 480e237a870f..000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Contains definitions specific to the Armada XP MV78260 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78260 SoC";
-	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		eth3 = &eth3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
-		 * configured as x4 or quad x1 lanes. One unit is
-		 * x4 only.
-		 */
-		pcie-controller {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
-				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
-				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-
-				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
-				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
-				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
-
-				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			pcie@6,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
-				reg = <0x3000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-
-			pcie@7,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
-				reg = <0x3800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			pcie@8,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
-				reg = <0x4000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 12>;
-				status = "disabled";
-			};
-
-			pcie@9,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				compatible = "marvell,mv78260-pinctrl";
-				reg = <0x18000 0x38>;
-
-				sdio_pins: sdio-pins {
-					marvell,pins = "mpp30", "mpp31", "mpp32",
-						       "mpp33", "mpp34", "mpp35";
-					marvell,function = "sd0";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			eth3: ethernet@34000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x34000 0x4000>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
deleted file mode 100644
index 2c7b1fef4703..000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ /dev/null
@@ -1,345 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Contains definitions specific to the Armada XP MV78460 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78460 SoC";
-	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		eth3 = &eth3;
-	};
-
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <2>;
-			clocks = <&cpuclk 2>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <3>;
-			clocks = <&cpuclk 3>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
-		 * configured as x4 or quad x1 lanes. Two units are
-		 * x4/x1.
-		 */
-		pcie-controller {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
-				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
-				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
-				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-
-				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
-				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
-				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
-
-				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
-
-				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
-				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			pcie@6,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
-				reg = <0x3000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-
-			pcie@7,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
-				reg = <0x3800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			pcie@8,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
-				reg = <0x4000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 12>;
-				status = "disabled";
-			};
-
-			pcie@9,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-
-			pcie@10,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
-				reg = <0x5000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
-					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 103>;
-				marvell,pcie-port = <3>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 27>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				compatible = "marvell,mv78460-pinctrl";
-				reg = <0x18000 0x38>;
-
-				sdio_pins: sdio-pins {
-					marvell,pins = "mpp30", "mpp31", "mpp32",
-						       "mpp33", "mpp34", "mpp35";
-					marvell,function = "sd0";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			eth3: ethernet@34000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x34000 0x4000>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
deleted file mode 100644
index 7d8f32873e82..000000000000
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- * Device Tree file for NETGEAR ReadyNAS 2120
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS 2120";
-	compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x80000000>; /* 2GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to first Marvell 88SE9170 SATA controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected to second Marvell 88SE9170 SATA controller */
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-
-			/* Connected to Fresco Logic FL1009 USB 3.0 controller */
-			pcie@5,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				poweroff: poweroff {
-					marvell,pins = "mpp42";
-					marvell,function = "gpio";
-				};
-
-				power_button_pin: power-button-pin {
-					marvell,pins = "mpp27";
-					marvell,function = "gpio";
-				};
-
-				reset_button_pin: reset-button-pin {
-					marvell,pins = "mpp41";
-					marvell,function = "gpio";
-				};
-
-				sata1_led_pin: sata1-led-pin {
-					marvell,pins = "mpp31";
-					marvell,function = "gpio";
-				};
-
-				sata2_led_pin: sata2-led-pin {
-					marvell,pins = "mpp40";
-					marvell,function = "gpio";
-				};
-
-				sata3_led_pin: sata3-led-pin {
-					marvell,pins = "mpp44";
-					marvell,function = "gpio";
-				};
-
-				sata4_led_pin: sata4-led-pin {
-					marvell,pins = "mpp47";
-					marvell,function = "gpio";
-				};
-
-				sata1_power_pin: sata1-power-pin {
-					marvell,pins = "mpp24";
-					marvell,function = "gpio";
-				};
-
-				sata2_power_pin: sata2-power-pin {
-					marvell,pins = "mpp25";
-					marvell,function = "gpio";
-				};
-
-				sata3_power_pin: sata3-power-pin {
-					marvell,pins = "mpp26";
-					marvell,function = "gpio";
-				};
-
-				sata4_power_pin: sata4-power-pin {
-					marvell,pins = "mpp28";
-					marvell,function = "gpio";
-				};
-
-				sata1_pres_pin: sata1-pres-pin {
-					marvell,pins = "mpp32";
-					marvell,function = "gpio";
-				};
-
-				sata2_pres_pin: sata2-pres-pin {
-					marvell,pins = "mpp33";
-					marvell,function = "gpio";
-				};
-
-				sata3_pres_pin: sata3-pres-pin {
-					marvell,pins = "mpp34";
-					marvell,function = "gpio";
-				};
-
-				sata4_pres_pin: sata4-pres-pin {
-					marvell,pins = "mpp35";
-					marvell,function = "gpio";
-				};
-
-				err_led_pin: err-led-pin {
-					marvell,pins = "mpp45";
-					marvell,function = "gpio";
-				};
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			/* Front USB 2.0 port */
-			usb@50000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				clock-frequency = <400000>;
-				status = "okay";
-
-				isl12057: isl12057@68 {
-					compatible = "isil,isl12057";
-					reg = <0x68>;
-				};
-
-				/* Controller for rear fan #1 of 3 (Protechnic
-				 * MGT4012XB-O20, 8000RPM) near eSATA port */
-				g762_fan1: g762@3e {
-					compatible = "gmt,g762";
-					reg = <0x3e>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				/*  Controller for rear (center) fan #2 of 3 */
-				g762_fan2: g762@48 {
-					compatible = "gmt,g762";
-					reg = <0x48>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				/*  Controller for rear fan #3 of 3 */
-				g762_fan3: g762@49 {
-					compatible = "gmt,g762";
-					reg = <0x49>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				/* Temperature sensor */
-				g751: g751@4c {
-					compatible = "gmt,g751";
-					reg = <0x4c>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				/* Use Hardware BCH ECC */
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x180000>;  /* 1.5MB */
-					read-only;
-				};
-
-				partition@180000 {
-					label = "u-boot-env";
-					reg = <0x180000 0x20000>;    /* 128KB */
-					read-only;
-				};
-
-				partition@200000 {
-					label = "uImage";
-					reg = <0x0200000 0x600000>;    /* 6MB */
-				};
-
-				partition@800000 {
-					label = "minirootfs";
-					reg = <0x0800000 0x400000>;    /* 4MB */
-				};
-
-				/* Last MB is for the BBT, i.e. not writable */
-				partition@c00000 {
-					label = "ubifs";
-					reg = <0x0c00000 0x7400000>; /* 116MB */
-				};
-			};
-		};
-	};
-
-	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin
-			     &sata3_led_pin &sata4_led_pin>;
-		pinctrl-names = "default";
-
-		red-sata1-led {
-			label = "rn2120:red:sata1";
-			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-sata2-led {
-			label = "rn2120:red:sata2";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-sata3-led {
-			label = "rn2120:red:sata3";
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-sata4-led {
-			label = "rn2120:red:sata4";
-			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-err-led {
-			label = "rn2120:red:err";
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&power_button_pin &reset_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
deleted file mode 100644
index 4e5a59ee1501..000000000000
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Device Tree file for OpenBlocks AX3-4 board
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-xp-mv78260.dtsi"
-
-/ {
-	model = "PlatHome OpenBlocks AX3-4 board";
-	compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
-
-		devbus-bootcs {
-			status = "okay";
-
-			/* Device Bus parameters are required */
-
-			/* Read parameters */
-			devbus,bus-width    = <16>;
-			devbus,turn-off-ps  = <60000>;
-			devbus,badr-skew-ps = <0>;
-			devbus,acc-first-ps = <124000>;
-			devbus,acc-next-ps  = <248000>;
-			devbus,rd-setup-ps  = <0>;
-			devbus,rd-hold-ps   = <0>;
-
-			/* Write parameters */
-			devbus,sync-enable = <0>;
-			devbus,wr-high-ps  = <60000>;
-			devbus,wr-low-ps   = <60000>;
-			devbus,ale-wr-ps   = <60000>;
-
-			/* NOR 128 MiB */
-			nor@0 {
-				compatible = "cfi-flash";
-				reg = <0 0x8000000>;
-				bank-width = <2>;
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			pinctrl {
-				led_pins: led-pins-0 {
-					marvell,pins = "mpp49", "mpp51", "mpp53";
-					marvell,function = "gpio";
-				};
-			};
-			leds {
-				compatible = "gpio-leds";
-				pinctrl-names = "default";
-				pinctrl-0 = <&led_pins>;
-
-				red_led {
-					label = "red_led";
-					gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-
-				yellow_led {
-					label = "yellow_led";
-					gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-
-				green_led {
-					label = "green_led";
-					gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-					default-state = "keep";
-				};
-			};
-
-			gpio_keys {
-				compatible = "gpio-keys";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				button@1 {
-					label = "Init Button";
-					linux,code = <KEY_POWER>;
-					gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <2>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <3>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "sgmii";
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "sgmii";
-			};
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy2>;
-				phy-mode = "sgmii";
-			};
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy3>;
-				phy-mode = "sgmii";
-			};
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <400000>;
-			};
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <400000>;
-
-				s35390a: s35390a@30 {
-					compatible = "s35390a";
-					reg = <0x30>;
-				};
-			};
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			/* Front side USB 0 */
-			usb@50000 {
-				status = "okay";
-			};
-
-			/* Front side USB 1 */
-			usb@51000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
deleted file mode 100644
index bff9f6c18db1..000000000000
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Ben Dooks <ben.dooks@codethink.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Contains definitions specific to the Armada XP SoC that are not
- * common to all Armada SoCs.
- */
-
-#include "armada-370-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP family SoC";
-	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		eth2 = &eth2;
-	};
-
-	soc {
-		compatible = "marvell,armadaxp-mbus", "simple-bus";
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
-		};
-
-		internal-regs {
-			L2: l2-cache {
-				compatible = "marvell,aurora-system-cache";
-				reg = <0x08000 0x1000>;
-				cache-id-part = <0x100>;
-				wt-override;
-			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x100>;
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x100>;
-			};
-
-			serial@12200 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12200 0x100>;
-				reg-shift = <2>;
-				interrupts = <43>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-			serial@12300 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12300 0x100>;
-				reg-shift = <2>;
-				interrupts = <44>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			system-controller@18200 {
-				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x500>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-xp-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			coreclk: mvebu-sar@18230 {
-				compatible = "marvell,armada-xp-core-clock";
-				reg = <0x18230 0x08>;
-				#clock-cells = <1>;
-			};
-
-			thermal@182b0 {
-				compatible = "marvell,armadaxp-thermal";
-				reg = <0x182b0 0x4
-					0x184d0 0x4>;
-				status = "okay";
-			};
-
-			cpuclk: clock-complex@18700 {
-				#clock-cells = <1>;
-				compatible = "marvell,armada-xp-cpu-clock";
-				reg = <0x18700 0xA0>, <0x1c054 0x10>;
-				clocks = <&coreclk 1>;
-			};
-
-			interrupt-controller@20000 {
-			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-xp-timer";
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-xp-wdt";
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x20>;
-			};
-
-			eth2: ethernet@30000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x30000 0x4000>;
-				interrupts = <12>;
-				clocks = <&gateclk 2>;
-				status = "disabled";
-			};
-
-			usb@50000 {
-				clocks = <&gateclk 18>;
-			};
-
-			usb@51000 {
-				clocks = <&gateclk 19>;
-			};
-
-			usb@52000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x52000 0x500>;
-				interrupts = <47>;
-				clocks = <&gateclk 20>;
-				status = "disabled";
-			};
-
-			xor@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gateclk 22>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <51>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <52>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			xor@f0900 {
-				compatible = "marvell,orion-xor";
-				reg = <0xF0900 0x100
-				       0xF0B00 0x100>;
-				clocks = <&gateclk 28>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <94>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <95>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-		};
-	};
-
-	clocks {
-		/* 25 MHz reference crystal */
-		refclk: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi
index 5a660d0faf42..26f5443d85e1 100644
--- a/arch/arm/boot/dts/armv7-m.dtsi
+++ b/arch/arm/boot/dts/armv7-m.dtsi
@@ -1,13 +1,18 @@
-#include "skeleton.dtsi"
-
+// SPDX-License-Identifier: GPL-2.0
 / {
-	nvic: nv-interrupt-controller  {
+	nvic: interrupt-controller@e000e100  {
 		compatible = "arm,armv7m-nvic";
 		interrupt-controller;
 		#interrupt-cells = <1>;
 		reg = <0xe000e100 0xc00>;
 	};
 
+	systick: timer@e000e010 {
+		compatible = "arm,armv7m-systick";
+		reg = <0xe000e010 0x10>;
+		status = "disabled";
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
new file mode 100644
index 000000000000..0f0b5b707654
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ASPEED) += \
+	aspeed-ast2500-evb.dtb \
+	aspeed-ast2600-evb-a1.dtb \
+	aspeed-ast2600-evb.dtb \
+	aspeed-bmc-amd-daytonax.dtb \
+	aspeed-bmc-amd-ethanolx.dtb \
+	aspeed-bmc-ampere-mtjade.dtb \
+	aspeed-bmc-ampere-mtjefferson.dtb \
+	aspeed-bmc-ampere-mtmitchell.dtb \
+	aspeed-bmc-arm-stardragon4800-rep2.dtb \
+	aspeed-bmc-asrock-e3c246d4i.dtb \
+	aspeed-bmc-asrock-e3c256d4i.dtb \
+	aspeed-bmc-asrock-romed8hm3.dtb \
+	aspeed-bmc-asrock-spc621d8hm3.dtb \
+	aspeed-bmc-asrock-x570d4u.dtb \
+	aspeed-bmc-asus-x4tf.dtb \
+	aspeed-bmc-bytedance-g220a.dtb \
+	aspeed-bmc-delta-ahe50dc.dtb \
+	aspeed-bmc-facebook-bletchley.dtb \
+	aspeed-bmc-facebook-catalina.dtb \
+	aspeed-bmc-facebook-clemente.dtb \
+	aspeed-bmc-facebook-cmm.dtb \
+	aspeed-bmc-facebook-darwin.dtb \
+	aspeed-bmc-facebook-elbert.dtb \
+	aspeed-bmc-facebook-fuji-data64.dtb \
+	aspeed-bmc-facebook-fuji.dtb \
+	aspeed-bmc-facebook-galaxy100.dtb \
+	aspeed-bmc-facebook-greatlakes.dtb \
+	aspeed-bmc-facebook-harma.dtb \
+	aspeed-bmc-facebook-minerva.dtb \
+	aspeed-bmc-facebook-minipack.dtb \
+	aspeed-bmc-facebook-santabarbara.dtb \
+	aspeed-bmc-facebook-tiogapass.dtb \
+	aspeed-bmc-facebook-wedge40.dtb \
+	aspeed-bmc-facebook-wedge100.dtb \
+	aspeed-bmc-facebook-wedge400-data64.dtb \
+	aspeed-bmc-facebook-wedge400.dtb \
+	aspeed-bmc-facebook-yamp.dtb \
+	aspeed-bmc-facebook-yosemitev2.dtb \
+	aspeed-bmc-facebook-yosemite4.dtb \
+	aspeed-bmc-ibm-blueridge.dtb \
+	aspeed-bmc-ibm-bonnell.dtb \
+	aspeed-bmc-ibm-everest.dtb \
+	aspeed-bmc-ibm-fuji.dtb \
+	aspeed-bmc-ibm-rainier.dtb \
+	aspeed-bmc-ibm-rainier-1s4u.dtb \
+	aspeed-bmc-ibm-rainier-4u.dtb \
+	aspeed-bmc-ibm-sbp1.dtb \
+	aspeed-bmc-ibm-system1.dtb \
+	aspeed-bmc-intel-s2600wf.dtb \
+	aspeed-bmc-inspur-fp5280g2.dtb \
+	aspeed-bmc-inspur-nf5280m6.dtb \
+	aspeed-bmc-inspur-on5263m5.dtb \
+	aspeed-bmc-lenovo-hr630.dtb \
+	aspeed-bmc-lenovo-hr855xg2.dtb \
+	aspeed-bmc-microsoft-olympus.dtb \
+	aspeed-bmc-nvidia-gb200nvl-bmc.dtb \
+	aspeed-bmc-opp-lanyang.dtb \
+	aspeed-bmc-opp-mowgli.dtb \
+	aspeed-bmc-opp-nicole.dtb \
+	aspeed-bmc-opp-palmetto.dtb \
+	aspeed-bmc-opp-romulus.dtb \
+	aspeed-bmc-opp-tacoma.dtb \
+	aspeed-bmc-opp-vesnin.dtb \
+	aspeed-bmc-opp-witherspoon.dtb \
+	aspeed-bmc-opp-zaius.dtb \
+	aspeed-bmc-portwell-neptune.dtb \
+	aspeed-bmc-qcom-dc-scm-v1.dtb \
+	aspeed-bmc-quanta-q71l.dtb \
+	aspeed-bmc-quanta-s6q.dtb \
+	aspeed-bmc-supermicro-x11spi.dtb \
+	aspeed-bmc-inventec-starscream.dtb \
+	aspeed-bmc-inventec-transformers.dtb \
+	aspeed-bmc-tyan-s7106.dtb \
+	aspeed-bmc-tyan-s8036.dtb \
+	aspeed-bmc-ufispace-ncplite.dtb \
+	aspeed-bmc-vegman-n110.dtb \
+	aspeed-bmc-vegman-rx20.dtb \
+	aspeed-bmc-vegman-sx20.dtb
diff --git a/arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dts
new file mode 100644
index 000000000000..a497dd135491
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	model = "AST2500 EVB";
+	compatible = "aspeed,ast2500-evb", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd1_default>;
+};
+
+/*
+ * Enable port A as device (via the virtual hub) and port B as
+ * host by default on the eval board. This can be easily changed
+ * by replacing the override below with &ehci0 { ... } to enable
+ * host on both ports.
+ */
+&vhub {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gfx {
+     status = "okay";
+     memory-region = <&gfx_memory>;
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dts
new file mode 100644
index 000000000000..f34a2b1ec2f0
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 IBM Corp.
+
+#include "aspeed-ast2600-evb.dts"
+
+/ {
+	model = "AST2600 A1 EVB";
+	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600-evb", "aspeed,ast2600";
+
+	/delete-node/regulator-vcc-sdhci0;
+	/delete-node/regulator-vcc-sdhci1;
+	/delete-node/regulator-vccq-sdhci0;
+	/delete-node/regulator-vccq-sdhci1;
+};
+
+/delete-node/ &sdc;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
new file mode 100644
index 000000000000..de83c0eb1d6e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "AST2600 EVB";
+	compatible = "aspeed,ast2600-evb", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	vcc_sdhci0: regulator-vcc-sdhci0 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHCI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhci0: regulator-vccq-sdhci0 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHCI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>,
+			 <1800000 0>;
+	};
+
+	vcc_sdhci1: regulator-vcc-sdhci1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHCI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhci1: regulator-vccq-sdhci1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHCI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>,
+			 <1800000 0>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+
+&mac1 {
+	status = "okay";
+
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&ethphy1>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default>;
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <100000000>;
+	clk-phase-mmc-hs200 = <9>, <225>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart5 {
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	temp@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&fsim0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&sdc {
+	status = "okay";
+};
+
+/*
+ * The signal voltage of sdhci0 and sdhci1 on AST2600-A2 EVB is able to be
+ * toggled by GPIO pins.
+ * In the reference design, GPIOV0 of AST2600-A2 EVB is connected to the
+ * power load switch that provides 3.3v to sdhci0 vdd, GPIOV1 is connected to
+ * a 1.8v and a 3.3v power load switch that provides signal voltage to
+ * sdhci0 bus.
+ * If GPIOV0 is active high, sdhci0 is enabled, otherwise, sdhci0 is disabled.
+ * If GPIOV1 is active high, 3.3v power load switch is enabled, sdhci0 signal
+ * voltage is 3.3v, otherwise, 1.8v power load switch will be enabled,
+ * sdhci0 signal voltage becomes 1.8v.
+ * AST2600-A2 EVB also supports toggling signal voltage for sdhci1.
+ * The design is the same as sdhci0, it uses GPIOV2 as power-gpio and GPIOV3
+ * as power-switch-gpio.
+ */
+&sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <100000000>;
+	sdhci-drive-type = /bits/ 8 <3>;
+	sdhci-caps-mask = <0x7 0x0>;
+	sdhci,wp-inverted;
+	vmmc-supply = <&vcc_sdhci0>;
+	vqmmc-supply = <&vccq_sdhci0>;
+	clk-phase-sd-hs = <7>, <200>;
+};
+
+&sdhci1 {
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <100000000>;
+	sdhci-drive-type = /bits/ 8 <3>;
+	sdhci-caps-mask = <0x7 0x0>;
+	sdhci,wp-inverted;
+	vmmc-supply = <&vcc_sdhci1>;
+	vqmmc-supply = <&vccq_sdhci1>;
+	clk-phase-sd-hs = <7>, <200>;
+};
+
+&vhub {
+	status = "okay";
+	pinctrl-names = "default";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts
new file mode 100644
index 000000000000..64bb9bf92de2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "AMD DaytonaX BMC";
+	compatible = "amd,daytonax-bmc", "aspeed,ast2500";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-fault {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		led-identify {
+			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>,
+			<&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&uart1 {
+	//Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		&pinctrl_rxd1_default
+		&pinctrl_nrts1_default
+		&pinctrl_ndtr1_default
+		&pinctrl_ndsr1_default
+		&pinctrl_ncts1_default
+		&pinctrl_ndcd1_default
+		&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	//BMC Console
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x3f8>;
+	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"","","led-fault","led-identify","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"id-button","","","","","","","",
+	/*D0-D7*/	"","","ASSERT_BMC_READY","","","","","",
+	/*E0-E7*/	"reset-button","reset-control","power-button","power-control","",
+			"power-good","power-ok","",
+	/*F0-F7*/	"","","","","","","BATTERY_DETECT","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"FM_BMC_READ_SPD_TEMP","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm1_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default
+		&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@14 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@15 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-ethanolx.dts
new file mode 100644
index 000000000000..6bded774c457
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-ethanolx.dts
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 AMD Inc.
+// Author: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "AMD EthanolX BMC";
+	compatible = "amd,ethanolx-bmc", "aspeed,ast2500";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&uart1 {
+	//Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default
+		     &pinctrl_nrts1_default
+		     &pinctrl_ncts1_default>;
+};
+
+&uart5 {
+	//BMC Console
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		     &pinctrl_adc1_default
+		     &pinctrl_adc2_default
+		     &pinctrl_adc3_default
+		     &pinctrl_adc4_default>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"","","FAULT_LED","CHASSIS_ID_LED","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"CHASSIS_ID_BTN","INTRUDER","AC_LOSS","","","","","",
+	/*D0-D7*/	"HDT_DBREQ","LOCAL_SPI_ROM_SEL","FPGA_SPI_ROM_SEL","JTAG_MUX_S",
+			"JTAG_MUX_OE","HDT_SEL","ASERT_WARM_RST_BTN","FPGA_RSVD",
+	/*E0-E7*/	"","","MON_P0_PWR_BTN","MON_P0_RST_BTN","MON_P0_NMI_BTN",
+			"MON_P0_PWR_GOOD","MON_PWROK","MON_RESET",
+	/*F0-F7*/	"MON_P0_PROCHOT","MON_P1_PROCHOT","MON_P0_THERMTRIP",
+			"MON_P1_THERMTRIP","P0_PRESENT","P1_PRESENT","MON_ATX_PWR_OK","",
+	/*G0-G7*/	"BRD_REV_ID_3","BRD_REV_ID_2","BRD_REV_ID_1","BRD_REV_ID_0",
+			"P0_APML_ALERT","P1_APML_ALERT","FPGA ALERT","",
+	/*H0-H7*/	"BRD_ID_0","BRD_ID_1","BRD_ID_2","BRD_ID_3",
+			"PCIE_DISCONNECTED","USB_DISCONNECTED","SPARE_0","SPARE_1",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"ASSERT_PWR_BTN","ASSERT_RST_BTN","ASSERT_NMI_BTN",
+			"ASSERT_LOCAL_LOCK","ASSERT_P0_PROCHOT","ASSERT_P1_PROCHOT",
+			"ASSERT_CLR_CMOS","ASSERT_BMC_READY",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"P0_VDD_CORE_RUN_VRHOT","P0_VDD_SOC_RUN_VRHOT",
+			"P0_VDD_MEM_ABCD_SUS_VRHOT","P0_VDD_MEM_EFGH_SUS_VRHOT",
+			"P1_VDD_CORE_RUN_VRHOT","P1_VDD_SOC_RUN_VRHOT",
+			"P1_VDD_MEM_ABCD_SUS_VRHOT","P1_VDD_MEM_EFGH_SUS_VRHOT",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","SENSOR THERM","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+//APML for P0
+&i2c0 {
+	status = "okay";
+};
+
+//APML for P1
+&i2c1 {
+	status = "okay";
+};
+
+//FPGA
+&i2c2 {
+	status = "okay";
+};
+
+//24LC128 EEPROM
+&i2c3 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+//P0 Power regulators
+&i2c4 {
+	status = "okay";
+};
+
+//P1 Power regulators
+&i2c5 {
+	status = "okay";
+};
+
+//P0/P1 Thermal diode
+&i2c6 {
+	status = "okay";
+};
+
+// Thermal Sensors
+&i2c7 {
+	status = "okay";
+
+	lm75a@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+	};
+
+	lm75a@49 {
+		compatible = "national,lm75a";
+		reg = <0x49>;
+	};
+
+	lm75a@4a {
+		compatible = "national,lm75a";
+		reg = <0x4a>;
+	};
+
+	lm75a@4b {
+		compatible = "national,lm75a";
+		reg = <0x4b>;
+	};
+
+	lm75a@4c {
+		compatible = "national,lm75a";
+		reg = <0x4c>;
+	};
+
+	lm75a@4d {
+		compatible = "national,lm75a";
+		reg = <0x4d>;
+	};
+
+	lm75a@4e {
+		compatible = "national,lm75a";
+		reg = <0x4e>;
+	};
+
+	lm75a@4f {
+		compatible = "national,lm75a";
+		reg = <0x4f>;
+	};
+};
+
+//BMC I2C
+&i2c8 {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x60>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x62>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA2>;
+};
+
+&kcs4 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x97DE>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&lpc_ctrl {
+	//Enable lpc clock
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x3f8>;
+	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default
+	&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
new file mode 100644
index 000000000000..263702599767
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
@@ -0,0 +1,834 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt. Jade BMC";
+	compatible = "ampere,mtjade-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 *  i2c bus 50-57 assigned to NVMe slot 0-7
+		 */
+		i2c50 = &nvmeslot_0;
+		i2c51 = &nvmeslot_1;
+		i2c52 = &nvmeslot_2;
+		i2c53 = &nvmeslot_3;
+		i2c54 = &nvmeslot_4;
+		i2c55 = &nvmeslot_5;
+		i2c56 = &nvmeslot_6;
+		i2c57 = &nvmeslot_7;
+
+		/*
+		 *  i2c bus 60-67 assigned to NVMe slot 8-15
+		 */
+		i2c60 = &nvmeslot_8;
+		i2c61 = &nvmeslot_9;
+		i2c62 = &nvmeslot_10;
+		i2c63 = &nvmeslot_11;
+		i2c64 = &nvmeslot_12;
+		i2c65 = &nvmeslot_13;
+		i2c66 = &nvmeslot_14;
+		i2c67 = &nvmeslot_15;
+
+		/*
+		 *  i2c bus 70-77 assigned to NVMe slot 16-23
+		 */
+		i2c70 = &nvmeslot_16;
+		i2c71 = &nvmeslot_17;
+		i2c72 = &nvmeslot_18;
+		i2c73 = &nvmeslot_19;
+		i2c74 = &nvmeslot_20;
+		i2c75 = &nvmeslot_21;
+		i2c76 = &nvmeslot_22;
+		i2c77 = &nvmeslot_23;
+
+		/*
+		 *  i2c bus 80-81 assigned to NVMe M2 slot 0-1
+		 */
+		i2c80 = &nvme_m2_0;
+		i2c81 = &nvme_m2_1;
+
+		/*
+		 *  i2c bus 82 assigned to OCP slot
+		 */
+		i2c82 = &ocpslot;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpioA0mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_LOW>;
+	};
+
+	adc0mux: adc0mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc1mux: adc1mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc2mux: adc2mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc3mux: adc3mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc4mux: adc4mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc5mux: adc5mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc6mux: adc6mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc7mux: adc7mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc8mux: adc8mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 8>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc9mux: adc9mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 9>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc10mux: adc10mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 10>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc11mux: adc11mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 11>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc12mux: adc12mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 12>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc13mux: adc13mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 13>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0mux 0>, <&adc0mux 1>,
+			<&adc1mux 0>, <&adc1mux 1>,
+			<&adc2mux 0>, <&adc2mux 1>,
+			<&adc3mux 0>, <&adc3mux 1>,
+			<&adc4mux 0>, <&adc4mux 1>,
+			<&adc5mux 0>, <&adc5mux 1>,
+			<&adc6mux 0>, <&adc6mux 1>,
+			<&adc7mux 0>, <&adc7mux 1>,
+			<&adc8mux 0>, <&adc8mux 1>,
+			<&adc9mux 0>, <&adc9mux 1>,
+			<&adc10mux 0>, <&adc10mux 1>,
+			<&adc11mux 0>, <&adc11mux 1>,
+			<&adc12mux 0>, <&adc12mux 1>,
+			<&adc13mux 0>, <&adc13mux 1>,
+			<&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		/* spi-max-frequency = <50000000>; */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		/* spi-max-frequency = <100000000>; */
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			uefi@400000 {
+				reg = <0x400000 0x1C00000>;
+				label = "pnor-uefi";
+			};
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			 &pinctrl_rxd1_default
+			 &pinctrl_ncts1_default
+			 &pinctrl_nrts1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			 &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+			 &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+			 &pinctrl_rxd4_default>;
+};
+
+/* The BMC's uart */
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	smpro@4f {
+		compatible = "ampere,smpro";
+		reg = <0x4f>;
+	};
+	smpro@4e {
+		compatible = "ampere,smpro";
+		reg = <0x4e>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "microchip,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	inlet_mem2: tmp175@28 {
+		compatible = "ti,tmp175";
+		reg = <0x28>;
+	};
+
+	inlet_cpu: tmp175@29 {
+		compatible = "ti,tmp175";
+		reg = <0x29>;
+	};
+
+	inlet_mem1: tmp175@2a {
+		compatible = "ti,tmp175";
+		reg = <0x2a>;
+	};
+
+	outlet_cpu: tmp175@2b {
+		compatible = "ti,tmp175";
+		reg = <0x2b>;
+	};
+
+	outlet1: tmp175@2c {
+		compatible = "ti,tmp175";
+		reg = <0x2c>;
+	};
+
+	outlet2: tmp175@2d {
+		compatible = "ti,tmp175";
+		reg = <0x2d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		ocpslot: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ocpslot_temp: temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		nvmeslot_0_7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_8_15: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		nvmeslot_16_23: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		i2c-mux-idle-disconnect;
+
+		nvme_m2_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		nvme_m2_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+	};
+};
+
+&nvmeslot_0_7 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+
+	};
+};
+
+&nvmeslot_8_15 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_8: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_9: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_10: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_11: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_12: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_13: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_14: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_15: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&nvmeslot_16_23 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	psu@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+	adm1278@10 {
+		compatible = "adi,adm1278";
+		reg = <0x10>;
+	};
+
+	adm1278@11 {
+		compatible = "adi,adm1278";
+		reg = <0x11>;
+	};
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2_default &pinctrl_pwm3_default
+			&pinctrl_pwm4_default &pinctrl_pwm5_default
+			&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@1 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@5 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@6 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@7 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@8 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@9 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@10 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@11 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","","","host0-special-boot","","","","",
+	/*B0-B7*/	"i2c-backup-sel","","","",
+			"power-button","presence-cpu0","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"ps0-pgood","ps1-pgood","power-chassis-control","s0-ddr-save",
+			"power-chassis-good", "s1-ddr-save","","",
+	/*G0-G7*/	"host0-ready","host0-shd-req-n","host0-shd-ack-n",
+			"s0-overtemp-n","","","","",
+	/*H0-H7*/	"uart1-mode1","uart2-mode1","uart3-mode1","uart4-mode1",
+			"ps0-vin-good","ps1-vin-good","","i2c6-reset-n",
+	/*I0-I7*/	"presence-ps0","presence-ps1","s1-special-boot","","","","","",
+	/*J0-J7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","host0-sysreset-n","s0-spi-auth-fail-n","","","",
+	/*M0-M7*/	"","","","","s0-i2c9-alert-n","s1-i2c9-alert-n","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","identify-button","led-identify","",
+	/*R0-R7*/	"","","ext-hightemp-n","","ocp-main-pwren","reset-button","","",
+	/*S0-S7*/	"s0-vr-hot-n","s1-vr-hot-n","","",
+			"rtc-battery-voltage-read-enable","vr-pmbus-sel-n","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","bmc-vga-en-n","","","","",
+	/*Z0-Z7*/	"s0-plimit","s1-fault-alert","s1-fw-boot-ok","s0-rtc-lock","",
+			"s1-sys-auth-failure-n","s1-overtemp-n","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"s1-hightemp-n","s1-plimit","s0-ddr-addr","s1-ddr-addr","","",
+			"","",
+	/*AC0-AC7*/	"sys-pwr-gd","","spi0-program-sel","spi0-backup-sel","bmc-ok",
+			"","presence-cpu1","ocp-pgood";
+
+	i2c4-o-en-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "i2c4-o-en";
+	};
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+
+	bmc-ready-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AC, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "bmc-ready";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
new file mode 100644
index 000000000000..53b4372f1a08
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
@@ -0,0 +1,622 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright 2024 Ampere Computing LLC.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt. Jefferson BMC";
+	compatible = "ampere,mtjefferson-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c20 = &i2c4_bus70_chn0;
+		i2c22 = &i2c4_bus70_chn2;
+
+		/*
+		 *  I2C OCP alias port
+		 */
+		i2c30 = &ocpslot;
+
+		/*
+		 *  I2C NVMe alias port
+		 */
+		i2c48 = &nvmeslot_0;
+		i2c49 = &nvmeslot_1;
+		i2c50 = &nvmeslot_2;
+		i2c51 = &nvmeslot_3;
+		i2c52 = &nvmeslot_4;
+		i2c53 = &nvmeslot_5;
+		i2c54 = &nvmeslot_6;
+		i2c55 = &nvmeslot_7;
+		i2c56 = &nvmeslot_8;
+		i2c57 = &nvmeslot_9;
+		i2c58 = &nvmeslot_10;
+		i2c59 = &nvmeslot_11;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	voltage_mon_reg: voltage-mon-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ltc2497_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>;
+		};
+
+		led-sw-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-identify {
+			gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fault {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels =   <&adc0 0>, <&adc0 1>, <&adc0 2>,
+				<&adc_i2c_2 0>, <&adc_i2c_2 1>,
+				<&adc_i2c_2 2>, <&adc_i2c_2 3>,
+				<&adc_i2c_2 4>, <&adc_i2c_2 5>,
+				<&adc_i2c_2 6>, <&adc_i2c_2 7>,
+				<&adc_i2c_2 8>, <&adc_i2c_2 9>,
+				<&adc_i2c_2 10>, <&adc_i2c_2 11>,
+				<&adc_i2c_2 12>, <&adc_i2c_2 13>,
+				<&adc_i2c_2 14>, <&adc_i2c_2 15>,
+				<&adc_i2c_0 0>, <&adc_i2c_0 1>,
+				<&adc_i2c_0 2>, <&adc_i2c_0 3>,
+				<&adc_i2c_0 4>, <&adc_i2c_0 5>,
+				<&adc_i2c_0 6>, <&adc_i2c_0 7>,
+				<&adc_i2c_0 8>, <&adc_i2c_0 9>,
+				<&adc_i2c_0 10>, <&adc_i2c_0 11>,
+				<&adc_i2c_0 12>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <1000000>;
+	multi-master;
+	mctp-controller;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c4_bus70_chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c256";
+				reg = <0x52>;
+				pagesize = <32>;
+			};
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+			temperature-sensor@4a {
+				compatible = "ti,tmp75";
+				reg = <0x4a>;
+			};
+			temperature-sensor@4b {
+				compatible = "ti,tmp464";
+				reg = <0x4b>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				channel@0 {
+					reg = <0x0>;
+					status = "disabled";
+				};
+				channel@1 {
+					reg = <0x1>;
+					status = "disabled";
+				};
+				channel@2 {
+					reg = <0x2>;
+					status = "disabled";
+				};
+				channel@3 {
+					reg = <0x3>;
+					status = "disabled";
+				};
+				channel@4 {
+					reg = <0x4>;
+				};
+			};
+			temperature-sensor@4d {
+				compatible = "ti,tmp75";
+				reg = <0x4d>;
+			};
+			temperature-sensor@4e {
+				compatible = "ti,tmp75";
+				reg = <0x4e>;
+			};
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+			temperature-sensor@28 {
+				compatible = "nuvoton,nct7802";
+				reg = <0x28>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel@1 { /* RTD1 */
+					reg = <1>;
+					sensor-type = "temperature";
+					temperature-mode = "thermistor";
+				};
+			};
+			adc_i2c_0: adc@14 {
+				compatible = "lltc,ltc2497";
+				reg = <0x14>;
+				vref-supply = <&voltage_mon_reg>;
+				#io-channel-cells = <1>;
+			};
+		};
+
+		i2c4_bus70_chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			adc_i2c_2: adc@14 {
+				compatible = "lltc,ltc2497";
+				reg = <0x14>;
+				vref-supply = <&voltage_mon_reg>;
+				#io-channel-cells = <1>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_8: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_9: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_10: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_11: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				ocpslot: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					ocpslot_temp: temperature-sensor@1f {
+						compatible = "ti,tmp421";
+						reg = <0x1f>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						channel@0 {
+							reg = <0x0>;
+							status = "disabled";
+						};
+						channel@1 {
+							reg = <0x1>;
+						};
+					};
+				};
+
+				nvmeslot_0: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_1: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_2: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_3: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	fan-controller@5c {
+		compatible = "onnn,adt7462";
+		reg = <0x5c>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+
+	temperature-sensor@18 {
+		compatible = "jedec,jc-42.4-temp";
+		reg = <0x18>;
+	};
+
+	temperature-sensor@1a {
+		compatible = "jedec,jc-42.4-temp";
+		reg = <0x1a>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	bmc_ast2600_cpu: temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	gpio_expander1: gpio-expander@22 {
+		compatible = "nxp,pca9535";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"presence-ocp1","presence-ocp2",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","";
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","cpu-type-detect","i2c2-reset-n","i2c6-reset-n","i2c5-reset-n",
+	/*B0-B7*/	"","","","","host0-sysreset-n","host0-pmin-n","fru-rd-complete",
+			"chassis-id-sel",
+	/*C0-C7*/	"s0-vrd-fault-n","","bmc-debug-mode","","cpld-3v3-irq-n","","vrd-sel",
+			"spd-sel",
+	/*D0-D7*/	"presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
+			"","","","",
+	/*E0-E7*/	"eth-phy-rst-n","eth-phy-int-n","","","","","","",
+	/*F0-F7*/	"s0-pcp-oc-warn-n","","power-chassis-control",
+			"cpu-bios-recover","s0-heartbeat","hs-scout-proc-hot","s0-vr-hot-n","",
+	/*G0-G7*/	"","","hsc-12vmain-alt1-n","","","bp-cpld-program-en","led-fp-sta-gr",
+			"led-fp-sta-amb",
+	/*H0-H7*/	"jtag-program-sel","jtag-cmpl2","wd-disable-n","power-chassis-good","","",
+			"","",
+	/*I0-I7*/	"","","","","","","power-button","rtc-battery-voltage-read-enable",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","reset-button","","","",
+	/*M0-M7*/	"nmi-n","s0-ddr-save","soc-spi-nor-access","presence-cpu0","s0-rtc-lock",
+			"","","",
+	/*N0-N7*/	"hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
+			"jtag-dbgr-prsnt-n","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"ps0-ac-loss-n","ps1-ac-loss-n","","","led-fault","user-mode","jtag-srst-n",
+			"led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","identify-button","led-identify","","spi-nor-access","host0-ready","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n",
+			"host0-shd-ack-n","s0-overtemp-n",
+	/*W0-W7*/	"ocp-aux-pwren","ocp-main-pwren","ocp-pgood","",
+			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","vrd-prg-en-n","","","","host0-special-boot",
+	/*Z0-Z7*/	"","ps0-pgood","ps1-pgood","","","","","";
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","s0-soc-pgood","vga-ft-press-n","emmc-rst-n","s01-uart1-sel",
+	/*18C0-18C7*/	"uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
+			"","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
new file mode 100644
index 000000000000..2b336aa0146d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
@@ -0,0 +1,1061 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2022, Ampere Computing LLC
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt.Mitchell BMC";
+	compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial7 = &uart8;
+		serial8 = &uart9;
+
+		/*
+		 * I2C temperature alias port
+		 */
+		i2c20 = &i2c4_bus70_chn0;
+		i2c21 = &i2c4_bus70_chn1;
+		i2c22 = &i2c4_bus70_chn2;
+		i2c23 = &i2c4_bus70_chn3;
+
+		/*
+		 *  i2c bus 30-31 assigned to OCP slot 0-1
+		 */
+		i2c30 = &ocpslot_0;
+		i2c31 = &ocpslot_1;
+
+		/*
+		 *  i2c bus 32-33 assigned to Riser slot 0-1
+		 */
+		i2c32 = &i2c_riser0;
+		i2c33 = &i2c_riser1;
+
+		/*
+		 *  i2c bus 38-39 assigned to FRU on Riser slot 0-1
+		 */
+		i2c38 = &i2c_riser0_chn_0;
+		i2c39 = &i2c_riser1_chn_0;
+
+		/*
+		 *  I2C NVMe alias port
+		 */
+		i2c100 = &backplane_0;
+		i2c48 = &nvmeslot_0;
+		i2c49 = &nvmeslot_1;
+		i2c50 = &nvmeslot_2;
+		i2c51 = &nvmeslot_3;
+		i2c52 = &nvmeslot_4;
+		i2c53 = &nvmeslot_5;
+		i2c54 = &nvmeslot_6;
+		i2c55 = &nvmeslot_7;
+
+		i2c101 = &backplane_1;
+		i2c56 = &nvmeslot_8;
+		i2c57 = &nvmeslot_9;
+		i2c58 = &nvmeslot_10;
+		i2c59 = &nvmeslot_11;
+		i2c60 = &nvmeslot_12;
+		i2c61 = &nvmeslot_13;
+		i2c62 = &nvmeslot_14;
+		i2c63 = &nvmeslot_15;
+
+		i2c102 = &backplane_2;
+		i2c64 = &nvmeslot_16;
+		i2c65 = &nvmeslot_17;
+		i2c66 = &nvmeslot_18;
+		i2c67 = &nvmeslot_19;
+		i2c68 = &nvmeslot_20;
+		i2c69 = &nvmeslot_21;
+		i2c70 = &nvmeslot_22;
+		i2c71 = &nvmeslot_23;
+
+		i2c80 = &nvme_m2_0;
+		i2c81 = &nvme_m2_1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		/*
+		 * Use gpio-leds to configure GPIOW5 (bmc-ready) pin to be reseted when
+		 * watchdog timeout.
+		 */
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>;
+		};
+
+		led-sw-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-identify {
+			gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fault {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fan-fault {
+			gpios = <&gpio_expander1 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-psu-fault {
+			gpios = <&gpio_expander1 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	voltage_mon_reg: voltage-mon-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ltc2497_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpioI5mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(I, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	adc0mux: adc0mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc1mux: adc1mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc2mux: adc2mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc3mux: adc3mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc4mux: adc4mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc5mux: adc5mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc6mux: adc6mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc7mux: adc7mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc8mux: adc8mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 8>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc9mux: adc9mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 9>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc10mux: adc10mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 10>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc11mux: adc11mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 11>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc12mux: adc12mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 12>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc13mux: adc13mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 13>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc14mux: adc14mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 14>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc15mux: adc15mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 15>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels =	<&adc0mux 0>, <&adc0mux 1>,
+				<&adc1mux 0>, <&adc1mux 1>,
+				<&adc2mux 0>, <&adc2mux 1>,
+				<&adc3mux 0>, <&adc3mux 1>,
+				<&adc4mux 0>, <&adc4mux 1>,
+				<&adc5mux 0>, <&adc5mux 1>,
+				<&adc6mux 0>, <&adc6mux 1>,
+				<&adc7mux 0>, <&adc7mux 1>,
+				<&adc8mux 0>, <&adc8mux 1>,
+				<&adc9mux 0>, <&adc9mux 1>,
+				<&adc10mux 0>, <&adc10mux 1>,
+				<&adc11mux 0>, <&adc11mux 1>,
+				<&adc12mux 0>, <&adc12mux 1>,
+				<&adc13mux 0>, <&adc13mux 1>,
+				<&adc14mux 0>, <&adc14mux 1>,
+				<&adc15mux 0>, <&adc15mux 1>,
+				<&adc_i2c_1 0>, <&adc_i2c_1 1>,
+				<&adc_i2c_1 2>, <&adc_i2c_1 3>,
+				<&adc_i2c_1 4>, <&adc_i2c_1 5>,
+				<&adc_i2c_1 6>, <&adc_i2c_1 7>,
+				<&adc_i2c_1 8>, <&adc_i2c_1 9>,
+				<&adc_i2c_1 10>, <&adc_i2c_1 11>,
+				<&adc_i2c_1 12>, <&adc_i2c_1 13>,
+				<&adc_i2c_1 14>, <&adc_i2c_1 15>,
+				<&adc0 0>, <&adc0 1>,
+				<&adc0 2>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	temperature-sensor@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	psu@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <1000000>;
+	multi-master;
+	mctp-controller;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	adc_i2c_0: adc@14 {
+		compatible = "lltc,ltc2497";
+		reg = <0x14>;
+		vref-supply = <&voltage_mon_reg>;
+		#io-channel-cells = <1>;
+	 };
+
+	adc_i2c_1: adc@16 {
+		compatible = "lltc,ltc2497";
+		reg = <0x16>;
+		vref-supply = <&voltage_mon_reg>;
+		#io-channel-cells = <1>;
+	 };
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c4_bus70_chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			outlet_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu1_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			pcie_zone_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu0_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			pcie_zone_temp2: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			outlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			mb_inlet_temp1: temperature-sensor@7c {
+				compatible = "microchip,emc1413";
+				reg = <0x7c>;
+			};
+			mb_inlet_temp2: temperature-sensor@4c {
+				compatible = "microchip,emc1413";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		ocpslot_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ocpslot_0_temp: temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		ocpslot_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			ocpslot_1_temp: temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c_riser0: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				i2c_riser0_chn_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					eeprom@50 {
+						compatible = "atmel,24c02";
+						reg = <0x50>;
+						pagesize = <16>;
+					};
+				};
+			};
+		};
+
+		i2c_riser1: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				i2c_riser1_chn_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					eeprom@50 {
+						compatible = "atmel,24c02";
+						reg = <0x50>;
+						pagesize = <16>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+	};
+
+	gpio@77 {
+		compatible = "nxp,pca9539";
+		reg = <0x77>;
+		gpio-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"ext-vref-sel","","presence-hdd-bp5-n","presence-hdd-bp6-n",
+		"","bmc-riser-en-n","bmc-ocp1-en-n","bmc-ocp0-en-n",
+		"","","","",
+		"","","","";
+
+		bmc-ocp0-en-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "bmc-ocp0-en-n";
+		};
+	};
+
+	fan-controller0@20 {
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	fan-controller1@2f {
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		backplane_1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_8: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_9: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_10: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_11: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+				nvmeslot_12: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_13: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_14: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_15: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			tmp432@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+		};
+
+		backplane_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_16: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_17: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_18: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_19: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+				nvmeslot_20: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_21: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_22: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_23: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			tmp432@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+		};
+
+		backplane_0: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+				nvmeslot_4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			tmp432@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvme_m2_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+
+				nvme_m2_1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+			};
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	bmc_ast2600_cpu: temperature-sensor@35 {
+		compatible = "ti,tmp175";
+		reg = <0x35>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	gpio_expander1: gpio-expander@22 {
+		compatible = "nxp,pca9535";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"fan-fault","psu-fault",
+			"","",
+			"","",
+			"gpi0","gpi1",
+			"","",
+			"","",
+			"","",
+			"","";
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","i2c2-reset-n","i2c6-reset-n","i2c4-reset-n",
+	/*B0-B7*/	"","","","","host0-sysreset-n","host0-pmin-n","","",
+	/*C0-C7*/	"s0-vrd-fault-n","s1-vrd-fault-n","bmc-debug-mode","",
+			"irq-n","","vrd-sel","spd-sel",
+	/*D0-D7*/	"presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
+			"","bmc-ncsi-txen","","",
+	/*E0-E7*/	"","eth-phy-int-n","clk50m-bmc-ncsi","","","","","",
+	/*F0-F7*/	"s0-pcp-oc-warn-n","s1-pcp-oc-warn-n","power-chassis-control",
+			"cpu-bios-recover","s0-heartbeat","hs-csout-prochot",
+			"s0-vr-hot-n","s1-vr-hot-n",
+	/*G0-G7*/	"","","hsc-12vmain-alt1-n","","","","","",
+	/*H0-H7*/	"jtag-program-sel","fpga-program-b","wd-disable-n",
+			"power-chassis-good","","","","",
+	/*I0-I7*/	"","","","","","adc-sw","power-button","rtc-battery-voltage-read-enable",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","s0-ddr-save","soc-spi-nor-access","presence-cpu0",
+			"s0-rtc-lock","","","",
+	/*N0-N7*/	"hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
+			"jtag-dbgr-prsnt-n","s1-heartbeat","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"ps0-ac-loss-n","ps1-ac-loss-n","","",
+			"led-fault","cpld-user-mode","jtag-srst-n","led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","identify-button","led-identify",
+			"s1-ddr-save","spi-nor-access","host0-ready","presence-cpu1",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n",
+			"host0-shd-ack-n","s0-overtemp-n",
+	/*W0-W7*/	"ocp-aux-pwren","ocp-main-pwren","ocp-pgood","s1-pcp-pgood",
+			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
+	/*X0-X7*/	"i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok",
+			"s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n",
+			"s1-overtemp-n","cpld-s1-spi-auth-fail-n",
+	/*Y0-Y7*/	"","","","","","","","host0-special-boot",
+	/*Z0-Z7*/	"reset-button","ps0-pgood","ps1-pgood","","","","","";
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","","","s0-soc-pgood","",
+	/*18C0-18C7*/	"uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
+			"uart3-mode0","uart3-mode1","uart4-mode0","uart4-mode1",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
new file mode 100644
index 000000000000..b550a48f48f0
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HXT StarDragon 4800 REP2 AST2520";
+	compatible = "hxt,stardragon4800-rep2-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+						<&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		system_fault1 {
+			label = "System_fault1";
+			gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		system_fault2 {
+			label = "System_fault2";
+			gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+			&pinctrl_spi2miso_default
+			&pinctrl_spi2mosi_default
+			&pinctrl_spi2cs0_default>;
+};
+
+&uart3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+	current-speed = <115200>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>,
+		 <&syscon ASPEED_CLK_MAC2RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp421@1e {
+		compatible = "ti,tmp421";
+		reg = <0x1e>;
+	};
+	tmp421@2a {
+		compatible = "ti,tmp421";
+		reg = <0x2a>;
+	};
+	tmp421@1c {
+		compatible = "ti,tmp421";
+		reg = <0x1c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	nvt210@4c {
+		compatible = "nvt210";
+		reg = <0x4c>;
+	};
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca9641@70 {
+		compatible = "nxp,pca9641";
+		reg = <0x70>;
+		i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+			dps650ab@58 {
+				compatible = "delta,dps650ab";
+				reg = <0x58>;
+			};
+		};
+	};
+
+	dps650ab@58 {
+		compatible = "delta,dps650ab";
+		reg = <0x58>;
+	};
+
+	dps650ab@59 {
+		compatible = "delta,dps650ab";
+		reg = <0x59>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&gpio {
+	pin-gpio-c7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BIOS_SPI_MUX_S";
+	};
+	pin-gpio-d1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PHY2_RESET_N";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
new file mode 100644
index 000000000000..3ebd80db06f9
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+	model = "ASRock E3C246D4I BMC";
+	compatible = "asrock,e3c246d4i-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			/* BMC_HB_LED_N */
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		system-fault {
+			/* SYSTEM_FAULT_LED_N */
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		uid-button {
+			label = "uid-button";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* thermal sensor, one diode run to a disconnected header */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* FRU EEPROM */
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "BMC_MAC1_INTB", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+			"", "", "", "",
+		/*  B */ "", "", "", "", "", "IRQ_BMC_PCH_SMI_LPC_N", "", "",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
+			"", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "SML0ALERT",
+		/*  H */ "FM_ME_RCVR_N", "O_PWROK", "SKL_CNL_R", "D4_DIMM_EVENT_3V_N",
+			"MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "",
+			"", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "BMC_CTS1", "BMC_DCD1", "BMC_DSR1", "BMC_RI1",
+			"BMC_DTR1", "BMC_RTS1", "BMC_TXD1", "BMC_RXD1",
+		/*  M */ "BMC_LAN0_DIS_N", "BMC_LAN1_DIS_N", "", "",
+			"", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "",
+			"BMC_SBM_PRESENT_1_N", "BMC_SBM_PRESENT_2_N",
+			"BMC_SBM_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "PCHHOT_BMC_N", "", "RSMRST",
+			"", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "PS_PWROK", /* dummy always-high signal */
+			"", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
+		/*  Z */ "CPU_CATERR_BMC_PCH_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
+			"", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
+		/* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY",
+			"", "", "", "",
+		/* AC */ "LAD0", "LAD1", "LAD2", "LAD3",
+			"CK_33M_BMC", "LFRAME", "SERIRQ", "S_PLTRST";
+
+	/* Assert BMC_READY so BIOS doesn't sit around waiting for it */
+	bmc-ready-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
new file mode 100644
index 000000000000..8c57a071f488
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/watchdog/aspeed-wdt.h>
+
+/{
+	model = "ASRock E3C256D4I BMC";
+	compatible = "asrock,e3c256d4i-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+
+		i2c20 = &i2c2mux0ch0;
+		i2c21 = &i2c2mux0ch1;
+		i2c22 = &i2c2mux0ch2;
+		i2c23 = &i2c2mux0ch3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC heartbeat */
+		led-0 {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "timer";
+		};
+
+		/* system fault */
+		led-1 {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <100000000>; /* 100 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c2mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c2mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c2mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c2mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	vrm@60 {
+		compatible = "isil,isl69269";
+		reg = <0x60>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	/* FRU eeprom */
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&wdt1 {
+	aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>;
+};
+
+&wdt2 {
+	aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default /* CPU */
+		&pinctrl_pwm2_default      /* rear */
+		&pinctrl_pwm4_default>;    /* front */
+
+	/* CPU */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* rear */
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	/* front */
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "", "", "NMI_BTN_N", "BMC_NMI", "", "", "", "",
+		/*  B */ "", "", "", "", "", "", "", "",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
+			"", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"", "", "", "",
+		/*  H */ "FM_ME_RCVR_N", "O_PWROK", "", "D4_DIMM_EVENT_3V_N",
+			"MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "", "", "", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "", "",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "PCHHOT_BMC_N", "", "RSMRST", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
+		/*  Z */ "CPU_CATERR_BMC_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
+			"", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
+		/* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY", "", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
+		&pinctrl_adc1_default	   /* 5VSB */
+		&pinctrl_adc2_default	   /* CPU1 */
+		&pinctrl_adc3_default	   /* VCCSA */
+		&pinctrl_adc4_default	   /* VCCM */
+		&pinctrl_adc5_default	   /* V10M */
+		&pinctrl_adc6_default	   /* VCCIO */
+		&pinctrl_adc7_default	   /* VCCGT */
+		&pinctrl_adc8_default	   /* VPPM */
+		&pinctrl_adc9_default	   /* BAT */
+		&pinctrl_adc10_default	   /* 3V */
+		&pinctrl_adc11_default	   /* 5V */
+		&pinctrl_adc12_default	   /* 12V */
+		&pinctrl_adc13_default	   /* GND */
+		&pinctrl_adc14_default	   /* GND */
+		&pinctrl_adc15_default>;   /* GND */
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
new file mode 100644
index 000000000000..e306655ce4a3
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+	model = "ASRock ROMED8HM3 BMC v1.00";
+	compatible = "asrock,romed8hm3-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		system-fault {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* inlet temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* IPB temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+
+	/* IPB PMIC */
+	lm25066@40 {
+		compatible = "ti,lm25066";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	/* 12VSB PMIC */
+	lm25066@41 {
+		compatible = "ti,lm25066";
+		reg = <0x41>;
+		shunt-resistor-micro-ohms = <10000>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Baseboard FRU eeprom */
+	eeprom@50 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default>;
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0b>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0c>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0d>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0e>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+			"", "", "", "",
+		/*  B */ "POST_COMPLETE_N", "", "", "", "", "", "", "",
+		/*  C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "PSU_FAN_FAIL_N",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "NIC_PWR_GOOD", "PRSNTB0", "PRSNTB1", "PRSNTB2",
+			"PRSNTB3", "", "3VSB_PCIE1_PG", "12V_PCIE1_PG",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "BMC_ALERT4_N",
+		/*  H */ "X24_C1_PRSNT", "X24_C2_PRSNT", "X24_C3_PRSNT", "FM_MEM_THERM_EVENT_BMC_R_N",
+			"FACMODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "", "P0_MA_DDR_QS_CS_N",
+			"", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "MEZZ_PWRBRK_N", "OCP_HP_RST_EN",
+			"MAIN_PWR_EN_G", "BMC_MAIN_EN", "AUX_PWR_EN_G", "BMC_AUX_EN",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "",
+			"BMC_SMB_PRESENT_1_N", "BMC_SMB_PRESENT_2_N",
+			"BMC_SMB_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+		/*  R */ "", "", "THERMALTRIP_CLEAR_N", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S4_S5", "NODE_ID_1", "NODE_ID_2", "", "", "", "",
+		/*  Z */ "", "", "SYSTEM_FAULT_LED_N", "FAST_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "FM_CPU0_IBMC_THERMTRIP_N", "", "PROCHOT_L_G", "",
+			"", "", "", "",
+		/* AB */ "BMC_FORCE_SELFREFRESH", "PWRGD_OUT", "", "IRQ_BMC_PCH_SMI_LPC_N",
+			"", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
new file mode 100644
index 000000000000..c4097e4f2ca4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/{
+	model = "ASRock SPC621D8HM3 BMC";
+	compatible = "asrock,spc621d8hm3-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+
+		i2c20 = &i2c1mux0ch0;
+		i2c21 = &i2c1mux0ch1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC heartbeat */
+		led-0 {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "timer";
+		};
+
+		/* system fault */
+		led-1 {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* hardware monitor/thermal sensor */
+	temperature-sensor@29 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x29>;
+	};
+
+	/* motherboard temp sensor (TMP1, near BMC) */
+	temperature-sensor@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+
+	/* motherboard FRU eeprom */
+	eeprom@50 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+
+	/* M.2 slot smbus mux */
+	i2c-mux@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default
+		&pinctrl_pwm4_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "LOCATORLED_STATUS_N", "LOCATORBTN_N",
+			"BMC_READY_N", "FM_SPD_DDRCPU_LVLSHFT_EN",
+			"", "", "", "",
+		/*  B */ "NODE_ID_1", "NODE_ID_2", "PSU_FAN_FAIL_N", "",
+			"", "", "", "GPIO_RST",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "FP_PWR_BTN_MUX_N", "FM_BMC_PWRBTN_OUT_N",
+			"FP_RST_BTN_N", "RST_BMC_RSTBTN_OUT_N",
+			"NMI_BTN_N", "BMC_NMI",
+			"", "",
+		/*  E */ "", "", "", "FM_ME_RCVR_N", "", "", "", "",
+		/*  F */ "BMC_SMB_SEL_N", "FM_CPU2_DISABLE_COD_N",
+			"FM_REMOTE_DEBUG_BMC_EN", "FM_CPU_ERR0_LVT3_EN",
+			"FM_CPU_ERR1_LVT3_EN", "FM_CPU_ERR2_LVT3_EN",
+			"FM_MEM_THERM_EVENT_CPU1_LVT3_N", "FM_MEM_THERM_EVENT_CPU2_LVT3_N",
+		/*  G */ "HWM_BAT_EN", "", "BMC_PHYRST_N", "FM_BIOS_SPI_BMC_CTRL",
+			"BMC_ALERT1_N", "BMC_ALERT2_N", "BMC_ALERT3_N", "IRQ_SML0_ALERT_N",
+		/*  H */ "BMC_SMB_PRESENT_1_N", "FM_PCH_CORE_VID_0", "FM_PCH_CORE_VID_1", "",
+			"FM_MFG_MODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "IRQ_PVDDQ_ABCD_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_ABCD_CPU2_VRHOT_LVC3_N",
+			"IRQ_PVDDQ_EFGH_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_EFGH_CPU2_VRHOT_LVC3_N",
+			"", "", "", "",
+		/*  J */ "", "", "", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "FM_PVCCIN_CPU1_PWR_IN_ALERT_N", "FM_PVCCIN_CPU2_PWR_IN_ALERT_N",
+			"IRQ_PVCCIN_CPU1_VRHOT_LVC3_N", "IRQ_PVCCIN_CPU2_VRHOT_LVC3_N",
+			"FM_CPU1_PROCHOT_BMC_LVC3_N", "",
+			"FM_CPU1_MEMHOT_OUT_N", "FM_CPU2_MEMHOT_OUT_N",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "RST_GLB_RST_WARN_N", "PCIE_WAKE_N",
+		/*  R */ "", "", "FM_BMC_SUSACK_N", "FM_BMC_EUP_LOT6_N",
+			"", "FM_BMC_PCH_SCI_LPC_N", "", "",
+		/*  S */ "FM_DBP_PRESENT_N", "FM_CPU2_SKTOCC_LCT3_N",
+			"FM_CPU1_FIVR_FAULT_LVT3", "FM_CPU2_FIVR_FAULT_LVT3",
+			 "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "FM_SLPS3_N", "FM_SLPS4_N", "", "FM_BMC_ONCTL_N_PLD",
+			"", "", "", "",
+		/*  Z */ "FM_CPU_MSMI_CATERR_LVT3_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "FM_CPU1_THERMTRIP_LATCH_LVT3_N", "FM_CPU2_THERMTRIP_LATCH_LVT3_N",
+			"FM_BIOS_POST_COMPLT_N", "DBP_BMC_SYSPWROK",
+			"", "IRQ_SML0_ALERT_MUX_N",
+			"IRQ_SMI_ACTIVE_N", "IRQ_NMI_EVENT_N",
+		/* AB */ "FM_PCH_BMC_THERMTRIP_N", "PWRGD_SYS_PWROK",
+			"ME_OVERRIDE", "IRQ_BMC_PCH_SMI_LPC_N",
+			"", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
+		&pinctrl_adc1_default	   /* 5VSB */
+		&pinctrl_adc2_default	   /* CPU1 */
+		&pinctrl_adc3_default	   /* NC */
+		&pinctrl_adc4_default	   /* VCCMABCD */
+		&pinctrl_adc5_default	   /* VCCMEFGH */
+		&pinctrl_adc6_default	   /* NC */
+		&pinctrl_adc7_default	   /* NC */
+		&pinctrl_adc8_default	   /* PVNN_PCH */
+		&pinctrl_adc9_default	   /* 1P05PCH */
+		&pinctrl_adc10_default	   /* 1P8PCH */
+		&pinctrl_adc11_default	   /* BAT */
+		&pinctrl_adc12_default	   /* 3V */
+		&pinctrl_adc13_default	   /* 5V */
+		&pinctrl_adc14_default	   /* 12V */
+		&pinctrl_adc15_default>;   /* GND */
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
new file mode 100644
index 000000000000..e61a6cb43438
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Asrock Rack X570D4U BMC";
+	compatible = "asrock,x570d4u-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c40 = &i2c4mux0ch0;
+		i2c41 = &i2c4mux0ch1;
+		i2c42 = &i2c4mux0ch2;
+		i2c43 = &i2c4mux0ch3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pci_memory: region@9a000000 {
+			no-map;
+			reg = <0x9a000000 0x00010000>; /* 64K */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02800000>;	/* 40M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* led-heartbeat-n */
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "timer";
+		};
+
+		led-1 {
+			/* led-fault-n */
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_FAULT;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*  A */ "input-locatorled-n", "", "", "", "", "", "", "",
+	/*  B */ "input-bios-post-cmplt-n", "", "", "", "", "", "", "",
+	/*  C */ "", "", "", "", "", "", "control-locatorbutton-n", "",
+	/*  D */ "button-power-n", "control-power-n", "button-reset-n",
+		 "control-reset-n", "", "", "", "",
+	/*  E */ "", "", "", "", "", "", "", "",
+	/*  F */ "", "", "", "", "", "", "", "",
+	/*  G */ "output-hwm-vbat-enable", "input-id0-n", "input-id1-n",
+		 "input-id2-n", "input-aux-smb-alert-n", "",
+		 "input-psu-smb-alert-n", "",
+	/*  H */ "", "", "", "", "input-mfg-mode-n", "",
+		 "led-heartbeat-n", "input-case-open-n",
+	/*  I */ "", "", "", "", "", "", "", "",
+	/*  J */ "output-bmc-ready-n", "", "", "", "", "", "", "",
+	/*  K */ "", "", "", "", "", "", "", "",
+	/*  L */ "", "", "", "", "", "", "", "",
+	/*  M */ "", "", "", "", "", "", "", "",
+	/*  N */ "", "", "", "", "", "", "", "",
+	/*  O */ "", "", "", "", "", "", "", "",
+	/*  P */ "", "", "", "", "", "", "", "",
+	/*  Q */ "", "", "", "", "input-bmc-smb-present-n", "", "",
+		 "input-pcie-wake-n",
+	/*  R */ "", "", "", "", "", "", "", "",
+	/*  S */ "input-bmc-pchhot-n", "", "", "", "", "", "", "",
+	/*  T */ "", "", "", "", "", "", "", "",
+	/*  U */ "", "", "", "", "", "", "", "",
+	/*  V */ "", "", "", "", "", "", "", "",
+	/*  W */ "", "", "", "", "", "", "", "",
+	/*  X */ "", "", "", "", "", "", "", "",
+	/*  Y */ "input-sleep-s3-n", "input-sleep-s5-n", "", "", "", "",
+		 "", "",
+	/*  Z */ "", "", "led-fault-n", "output-bmc-throttle-n", "", "",
+		 "", "",
+	/* AA */ "input-cpu1-thermtrip-latch-n", "",
+		 "input-cpu1-prochot-n", "", "", "", "", "",
+	/* AB */ "", "input-power-good", "", "", "", "", "", "",
+	/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <10000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default &pinctrl_mdio2_default>;
+	use-ncsi;
+
+	nvmem-cells = <&eth1_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	/* SMBus on auxiliary panel header (AUX_PANEL1) */
+	status = "okay";
+};
+
+&i2c1 {
+	/* Hardware monitoring SMBus */
+	status = "okay";
+
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	/* PSU SMBus (PSU_SMB1) */
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c4mux0ch0: i2c@0 {
+			/* SMBus on PCI express 16x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c4mux0ch1: i2c@1 {
+			/* SMBus on PCI express 8x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c4mux0ch2: i2c@2 {
+			/* Unknown */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c4mux0ch3: i2c@3 {
+			/* SMBus on PCI express 1x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c5 {
+	/* SMBus on BMC connector (BMC_SMB_1) */
+	status = "okay";
+};
+
+&i2c7 {
+	/* FRU and SPD EEPROM SMBus */
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+
+			eth1_macaddress: macaddress@3f88 {
+				reg = <0x3f88 6>;
+			};
+		};
+	};
+};
+
+&i2c8 {
+	/* SMBus on intelligent platform management bus header (IPMB_1) */
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&pci_memory>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+				&pinctrl_pwm1_default
+				&pinctrl_pwm2_default
+				&pinctrl_pwm3_default
+				&pinctrl_pwm4_default
+				&pinctrl_pwm5_default>;
+
+	fan@0 {
+		/* FAN1 (4-pin) */
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		/* FAN2 (4-pin) */
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		/* FAN3 (4-pin) */
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		/* FAN4 (6-pin) */
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0b>;
+	};
+
+	fan@4 {
+		/* FAN6 (6-pin) */
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0d>;
+	};
+
+	fan@5 {
+		/* FAN5 (6-pin) */
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0c>;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default       /* 3VSB */
+			&pinctrl_adc1_default    /* 5VSB */
+			&pinctrl_adc2_default    /* VCPU */
+			&pinctrl_adc3_default    /* VSOC */
+			&pinctrl_adc4_default    /* VCCM */
+			&pinctrl_adc5_default    /* APU-VDDP */
+			&pinctrl_adc6_default    /* PM-VDD-CLDO */
+			&pinctrl_adc7_default    /* PM-VDDCR-S5 */
+			&pinctrl_adc8_default    /* PM-VDDCR */
+			&pinctrl_adc9_default    /* VBAT */
+			&pinctrl_adc10_default   /* 3V */
+			&pinctrl_adc11_default   /* 5V */
+			&pinctrl_adc12_default>; /* 12V */
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
new file mode 100644
index 000000000000..64f4ed07c7d2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 ASUS Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "ASUS-X4TF";
+	compatible = "asus,x4tf-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial4:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+				<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-uid {
+			gpios = <&gpio0 ASPEED_GPIO(P, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+			default-state = "off";
+		};
+
+		led-status_Y {
+			gpios = <&gpio1 ASPEED_GPIO(B, 1) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-sys_boot_status {
+			gpios = <&gpio1 ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "bios";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	pca9555_4_20: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_4_22: gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_4_24: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*A0 - A3 0*/	"", "STRAP_BMC_BATTERY_GPIO1", "", "",
+		/*A4 - A7 4*/	"", "", "", "",
+		/*B0 - B7 8*/	"", "", "", "", "", "", "", "";
+	};
+
+	pca9555_4_26: gpio@26 {
+		compatible = "nxp,pca9555";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca9555_5_24: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2c-mux@70  {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70 >;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_5: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			pca9555_5_5_20: gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"", "", "", "", "", "", "", "",
+					"", "", "SYS_FAN6", "SYS_FAN5",
+					"SYS_FAN4", "SYS_FAN3",
+					"SYS_FAN2", "SYS_FAN1";
+			};
+
+			pca9555_5_5_21: gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina219";
+				reg = <0x44>;
+				shunt-resistor = <2>;
+			};
+		};
+
+		channel_6: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_7: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_8: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	pca9555_6_27: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_6_20: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*A0 0*/	"", "", "", "", "", "", "", "",
+		/*B0 8*/	"Drive_NVMe1", "Drive_NVMe2", "", "",
+		/*B4 12*/	"", "", "", "";
+	};
+
+	pca9555_6_21: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		idle-state = <1>;
+
+		channel_9: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina219";
+				reg = <0x40>;
+				shunt-resistor = <2>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina219";
+				reg = <0x41>;
+				shunt-resistor = <5>;
+			};
+		};
+
+		channel_10: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_11: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_12: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		channel_13: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_14: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_15: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_16: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		channel_17: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_18: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina219";
+				reg = <0x41>;
+				shunt-resistor = <5>;
+			};
+		};
+
+		channel_19: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_20: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c08";
+		reg = <0x51>;
+	};
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&sdc {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs1 {
+	aspeed,lpc-io-reg = <0xca0>;
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0 0*/	"", "", "", "", "", "", "", "",
+	/*B0 8*/	"", "", "", "", "", "", "PS_PWROK", "",
+	/*C0 16*/	"", "", "", "", "", "", "", "",
+	/*D0 24*/	"", "", "", "", "", "", "", "",
+	/*E0 32*/	"", "", "", "", "", "", "", "",
+	/*F0 40*/	"", "", "", "", "", "", "", "",
+	/*G0 48*/	"", "", "", "", "", "", "", "",
+	/*H0 56*/	"", "", "", "", "", "", "", "",
+	/*I0 64*/	"", "", "", "", "", "", "", "",
+	/*J0 72*/	"", "", "", "", "", "", "", "",
+	/*K0 80*/	"", "", "", "", "", "", "", "",
+	/*L0 88*/	"", "", "", "", "", "", "", "",
+	/*M0 96*/	"", "", "", "", "", "", "", "",
+	/*N0 104*/	"", "", "", "",
+	/*N4 108*/	"POST_COMPLETE", "ESR1_GPIO_AST_SPISEL", "", "",
+	/*O0 112*/	"", "", "", "", "", "", "", "",
+	/*P0 120*/	"ID_BUTTON", "ID_OUT", "POWER_BUTTON", "POWER_OUT",
+	/*P4 124*/	"RESET_BUTTON", "RESET_OUT", "", "HEARTBEAT",
+	/*Q0 128*/	"", "", "", "", "", "", "", "",
+	/*R0 136*/	"", "", "", "", "", "", "", "",
+	/*S0 144*/	"", "", "", "", "", "", "", "",
+	/*T0 152*/	"", "", "", "", "", "", "", "",
+	/*U0 160*/	"", "", "", "", "", "", "", "",
+	/*V0 168*/	"", "", "", "", "", "", "", "",
+	/*W0 176*/	"", "", "", "", "", "", "", "",
+	/*X0 184*/	"", "", "", "", "", "", "", "",
+	/*Y0 192*/	"", "", "", "", "", "", "", "",
+	/*Z0 200*/	"", "", "", "", "", "", "", "";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
new file mode 100644
index 000000000000..54a5509b04f1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
@@ -0,0 +1,940 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2020 Bytedance.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Bytedance G220A BMC";
+	compatible = "bytedance,g220a-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+		i2c14 = &channel_3_0;
+		i2c15 = &channel_3_1;
+		i2c16 = &channel_3_2;
+		i2c17 = &channel_3_3;
+		i2c18 = &channel_6_0;
+		i2c19 = &channel_6_1;
+		i2c20 = &channel_6_2;
+		i2c21 = &channel_6_3;
+		i2c22 = &channel_6_4;
+		i2c23 = &channel_6_5;
+		i2c24 = &channel_6_6;
+		i2c25 = &channel_6_7;
+		i2c26 = &channel_6_8;
+		i2c27 = &channel_6_9;
+		i2c28 = &channel_6_10;
+		i2c29 = &channel_6_11;
+		i2c30 = &channel_6_12;
+		i2c31 = &channel_6_13;
+		i2c32 = &channel_6_14;
+		i2c33 = &channel_6_15;
+		i2c34 = &channel_6_16;
+		i2c35 = &channel_6_17;
+		i2c36 = &channel_6_18;
+		i2c37 = &channel_6_19;
+		i2c38 = &channel_6_20;
+		i2c39 = &channel_6_21;
+		i2c40 = &channel_6_22;
+		i2c41 = &channel_6_23;
+		i2c42 = &channel_6_24;
+		i2c43 = &channel_6_25;
+		i2c44 = &channel_10_0;
+		i2c45 = &channel_10_1;
+		i2c46 = &channel_10_2;
+		i2c47 = &channel_10_3;
+		i2c48 = &channel_10_4;
+		i2c49 = &channel_10_5;
+		i2c50 = &channel_10_6;
+		i2c51 = &channel_10_7;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@bc000000 {
+			no-map;
+			reg = <0xbc000000 0x04000000>; /* 64M */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		bmc_alive {
+			label = "bmc_alive";
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+			led-pattern = <1000 1000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		event-burn-in-signal {
+			label = "burn-in";
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(R, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-rear-riser1-presence {
+			label = "rear-riser1-presence";
+			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		event-alrt-pvddq-cpu0 {
+			label = "alrt-pvddq-cpu0";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		event-rear-riser0-presence {
+			label = "rear-riser0-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+
+		event-fault-pvddq-cpu0 {
+			label = "fault-pvddq-cpu0";
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-alrt-pvddq-cpu1 {
+			label = "alrt-pvddq-cpu1";
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fault-pvddq-cpu1 {
+			label = "alrt-pvddq-cpu1";
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fault-pvccin-cpu1 {
+			label = "fault-pvccin-cpuq";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-bmc-rom0-wp {
+			label = "bmc-rom0-wp";
+			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		event-bmc-rom1-wp {
+			label = "bmc-rom1-wp";
+			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <15>;
+		};
+
+		event-front-bp1-presence {
+			label = "front-bp1-presence";
+			gpios = <&pca1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <16>;
+		};
+
+		event-rear-bp-presence {
+			label = "rear-bp-presence";
+			gpios = <&pca1 9 GPIO_ACTIVE_LOW>;
+			linux,code = <17>;
+		};
+
+		event-fault-pvccin-cpu0 {
+			label = "fault-pvccin-cpu0";
+			gpios = <&pca1 10 GPIO_ACTIVE_LOW>;
+			linux,code = <18>;
+		};
+
+		event-alrt-p1v05-pvcc {
+			label = "alrt-p1v05-pvcc1";
+			gpios = <&pca1 11 GPIO_ACTIVE_LOW>;
+			linux,code = <19>;
+		};
+
+		event-fault-p1v05-pvccio {
+			label = "alrt-p1v05-pvcc1";
+			gpios = <&pca1 12 GPIO_ACTIVE_LOW>;
+			linux,code = <20>;
+		};
+
+		event-alrt-p1v8-pvccio {
+			label = "alrt-p1v8-pvccio";
+			gpios = <&pca1 13 GPIO_ACTIVE_LOW>;
+			linux,code = <21>;
+		};
+
+		event-fault-p1v8-pvccio {
+			label = "fault-p1v8-pvccio";
+			gpios = <&pca1 14 GPIO_ACTIVE_LOW>;
+			linux,code = <22>;
+		};
+
+		event-front-bp0-presence {
+			label = "front-bp0-presence";
+			gpios = <&pca1 15 GPIO_ACTIVE_LOW>;
+			linux,code = <23>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,alt-boot;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"SMRST_OCP_N","MAC2_LINK","BMC_CPLD_SMB_RST_R_N","BMC_CPLD_GPIO0",
+			"","","","",
+	/*B0-B7*/	"BMC_INIT_R_OK","FM_BOARD_REV_ID2","FM_PROJECT_ID7","FAULT_P12V_STBY_N",
+			"","CPU0_PROCHOT_LVT3_N","","BIOS_LOAD_DEFAULT_R_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"FM_PROJECT_ID0","FM_PROJECT_ID1","FM_PROJECT_ID2","FM_PROJECT_ID3",
+			"FM_PROJECT_ID4","FM_PROJECT_ID5","","",
+	/*F0-F7*/	"PSU0_PRSNT_N","PSU1_PRSNT_N","","FAULT_P12V_NVME_N",
+			"BIOS_DEBUG_MODE_R_N","DISABLE_CPU_DDR_R_SPD","COOLING_STRATEGY",
+			"PCH_GLB_RST_N",
+	/*G0-G7*/	"P12V_PMBUS_ALERT_N","CPLD_ALERT_N","BMC_RELOAD_N",
+			"P12V_PVDDQ_PMBUS_ALERT_N","BMC_JTAG_TCK_MUX_R_SEL","","NMI_OUT",
+			"NMI_BUTTON",
+	/*H0-H7*/	"BMC_CPLD_JTAG_TDI","BMC_CPLD_JTAG_TDO","BMC_CPLD_JTAG_TCK",
+			"BMC_CPLD_JTAG_TMS","FM_PROJECT_ID6","FM_BOARD_REV_ID0",
+			"PCA9546_U70_RST_N","IRQ_SML0_ALERT_N",
+	/*I0-I7*/	"FAULT_FRONT_RISER_P12V_N","FAULT_OCP_P12V_N","FM_BMC_PCH_SCI_R_N",
+			"","","","","",
+	/*J0-J7*/	"FM_CPU0_SKTOCC_N","FM_CPU1_SKTOCC_N","FM_CPU1_DISABLE_COD_N",
+			"","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"P12V_FAULT_N","PWRGD_P12V_PCIE_RISER","","LEAKAGE_DETECT_INPUT_N",
+			"","IRQ_SML1_PMBUS_ALERT_N","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","FM_PCH_THERMTRIP_N","CHASSIS_INTRUSION",
+	/*R0-R7*/	"","PVCCIN_CPU1_SMBALERT_N","BMC_PREQ_R_N","FAULT_P12V_PCIE_RISER_N",
+			"ALT_P12V_PCIE_RISER_N","BURN_BOARD_N","PVCCIN_CPU0_SMBALERT_N","",
+	/*S0-S7*/	"BMC_PRDY_N","SIO_POWER_GOOD","FM_BMC_PWR_DEBUG_R_N",
+			"FM_BMC_XDP_DEBUG_EN","","STRAP_BMC_BATTERY_GPIOS5","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","PWRGD_PSU0_PWROK","CPU1_PROCHOT_LVT3_N","IRQ_BMC_PCH_SMI_LPC_N",
+			"","","","",
+	/*Z0-Z7*/	"XDP_PRSNT_N","BMC_XDP_SYS_PWROK","BMC_XDP_JTAG_SEL",
+			"PCH_BMC_SMI_ACTIVE_R_N","","","","",
+	/*AA0-AA7*/	"PWRGD_P12V_STBY_OCP","PS_PWROK","RST_PLTRST_BMC_R_N","HDA_SDO_R",
+			"FM_SLPS4_R_N","PWRGD_PSU1_PWROK","POWER_BUTTON","POWER_OUT",
+	/*AB0-AB7*/	"","RESET_OUT","SPI_BIOS_MODE_SELECT","POST_COMPLETE","","","","",
+	/*AC0-AC7*/	"","","","","","","","CPLD_PLTRST_B_N";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xCA2>;
+	status = "okay";
+};
+
+&kcs4 {
+	aspeed,lpc-io-reg = <0xCA4>;
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default
+			&pinctrl_nrts2_default
+			&pinctrl_ndtr2_default
+			&pinctrl_ndsr2_default
+			&pinctrl_ncts2_default
+			&pinctrl_ndcd2_default
+			&pinctrl_nri2_default>;
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_3_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_3_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_3_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_3_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	i2c-mux@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_6_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_6_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_6_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_6_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+		channel_6_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		channel_6_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		channel_6_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		channel_6_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_6_8: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			i2c-mux@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_12: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+				};
+
+				channel_6_13: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_14: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_15: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_9: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			i2c-mux@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_16: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+				};
+
+				channel_6_17: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_18: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_19: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_10: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			i2c-mux@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_20: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				channel_6_21: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_22: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_23: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_11: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			i2c-mux@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_24: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				channel_6_25: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			 };
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+	pca0:pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca1:pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_10_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_10_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_10_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_10_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_10_4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_10_5: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_10_6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_10_7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+};
+
+&gpio {
+	pin-gpio-i3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "NCSI_BMC_R_SEL";
+	};
+
+	pin-gpio-b6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "EN_NCSI_SWITCH_N";
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts
new file mode 100644
index 000000000000..cce8d0416dc8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+#define EFUSE_OUTPUT(n)					\
+	efuse##n {					\
+		compatible = "regulator-output";	\
+		vout-supply = <&efuse##n>;		\
+	}
+
+#define __stringify(x) #x
+
+#define EFUSE(hexaddr, num)							\
+	efuse@##hexaddr {							\
+		compatible = "ti,lm25066";					\
+		reg = <0x##hexaddr>;						\
+		shunt-resistor-micro-ohms = <675>;				\
+		regulators {							\
+			efuse##num: vout {					\
+				regulator-name = __stringify(efuse##num##-reg);	\
+			};							\
+		};								\
+	}
+
+/{
+	model = "Delta Power AHE-50DC";
+	compatible = "delta,ahe50dc-bmc", "aspeed,ast2400";
+
+	aliases {
+		serial4 = &uart5;
+
+		/*
+		 * pca9541-arbitrated logical i2c buses are numbered as the
+		 * corresponding physical bus plus 20
+		 */
+		i2c20 = &i2carb0;
+		i2c21 = &i2carb1;
+		i2c22 = &i2carb2;
+		i2c23 = &i2carb3;
+		i2c24 = &i2carb4;
+		i2c26 = &i2carb6;
+		i2c27 = &i2carb7;
+		i2c28 = &i2carb8;
+		i2c32 = &i2carb12;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,115200n8 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		panic {
+			gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "panic";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+
+	EFUSE_OUTPUT(01);
+	EFUSE_OUTPUT(02);
+	EFUSE_OUTPUT(03);
+	EFUSE_OUTPUT(04);
+	EFUSE_OUTPUT(05);
+	EFUSE_OUTPUT(06);
+	EFUSE_OUTPUT(07);
+	EFUSE_OUTPUT(08);
+	EFUSE_OUTPUT(09);
+	EFUSE_OUTPUT(10);
+	EFUSE_OUTPUT(11);
+	EFUSE_OUTPUT(12);
+	EFUSE_OUTPUT(13);
+	EFUSE_OUTPUT(14);
+	EFUSE_OUTPUT(15);
+	EFUSE_OUTPUT(16);
+	EFUSE_OUTPUT(17);
+	EFUSE_OUTPUT(18);
+	EFUSE_OUTPUT(19);
+	EFUSE_OUTPUT(20);
+	EFUSE_OUTPUT(21);
+	EFUSE_OUTPUT(22);
+	EFUSE_OUTPUT(23);
+	EFUSE_OUTPUT(24);
+	EFUSE_OUTPUT(25);
+	EFUSE_OUTPUT(26);
+	EFUSE_OUTPUT(27);
+	EFUSE_OUTPUT(28);
+	EFUSE_OUTPUT(29);
+	EFUSE_OUTPUT(30);
+	EFUSE_OUTPUT(31);
+	EFUSE_OUTPUT(32);
+	EFUSE_OUTPUT(33);
+	EFUSE_OUTPUT(34);
+	EFUSE_OUTPUT(35);
+	EFUSE_OUTPUT(36);
+	EFUSE_OUTPUT(37);
+	EFUSE_OUTPUT(38);
+	EFUSE_OUTPUT(39);
+	EFUSE_OUTPUT(40);
+	EFUSE_OUTPUT(41);
+	EFUSE_OUTPUT(42);
+	EFUSE_OUTPUT(43);
+	EFUSE_OUTPUT(44);
+	EFUSE_OUTPUT(45);
+	EFUSE_OUTPUT(46);
+	EFUSE_OUTPUT(47);
+	EFUSE_OUTPUT(48);
+	EFUSE_OUTPUT(49);
+	EFUSE_OUTPUT(50);
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "flash0";
+		spi-max-frequency = <50000000>; // 50 MHz
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@79 {
+		compatible = "nxp,pca9541";
+		reg = <0x79>;
+
+		i2carb0: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57 */
+			EFUSE(10, 03);
+			EFUSE(11, 04);
+			EFUSE(12, 01);
+			EFUSE(13, 02);
+			EFUSE(14, 13);
+			EFUSE(15, 14);
+			EFUSE(16, 15);
+			EFUSE(17, 16);
+			EFUSE(40, 12);
+			EFUSE(41, 11);
+			EFUSE(42, 10);
+			EFUSE(43, 09);
+			EFUSE(44, 08);
+			EFUSE(45, 07);
+			EFUSE(46, 05);
+			EFUSE(47, 06);
+			EFUSE(50, 17);
+			EFUSE(51, 18);
+			EFUSE(52, 20);
+			EFUSE(53, 19);
+			EFUSE(54, 22);
+			EFUSE(55, 21);
+			EFUSE(56, 24);
+			EFUSE(57, 23);
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@72 {
+		compatible = "nxp,pca9541";
+		reg = <0x72>;
+
+		i2carb1: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@73 {
+		compatible = "nxp,pca9541";
+		reg = <0x73>;
+
+		i2carb2: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@74 {
+		compatible = "nxp,pca9541";
+		reg = <0x74>;
+
+		i2carb3: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7a {
+		compatible = "nxp,pca9541";
+		reg = <0x7a>;
+
+		i2carb4: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9534";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57, 59, 5a */
+			EFUSE(10, 27);
+			EFUSE(11, 28);
+			EFUSE(12, 25);
+			EFUSE(13, 26);
+			EFUSE(14, 37);
+			EFUSE(15, 38);
+			EFUSE(16, 39);
+			EFUSE(17, 40);
+			EFUSE(40, 36);
+			EFUSE(41, 35);
+			EFUSE(42, 34);
+			EFUSE(43, 33);
+			EFUSE(44, 32);
+			EFUSE(45, 31);
+			EFUSE(46, 29);
+			EFUSE(47, 30);
+			EFUSE(50, 41);
+			EFUSE(51, 42);
+			EFUSE(52, 44);
+			EFUSE(53, 43);
+			EFUSE(54, 46);
+			EFUSE(55, 45);
+			EFUSE(56, 48);
+			EFUSE(57, 47);
+			EFUSE(59, 49);
+			EFUSE(5a, 50);
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@75 {
+		compatible = "nxp,pca9541";
+		reg = <0x75>;
+
+		i2carb6: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@76 {
+		compatible = "nxp,pca9541";
+		reg = <0x76>;
+
+		i2carb7: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7c {
+		compatible = "nxp,pca9541";
+		reg = <0x7c>;
+
+		i2carb8: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fancontrol@30 {
+				compatible = "delta,ahe50dc-fan";
+				reg = <0x30>;
+			};
+
+			/* Baseboard FRU eeprom */
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@71 {
+		compatible = "nxp,pca9541";
+		reg = <0x71>;
+
+		i2carb12: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "", "", "", "", "", "", "", "",
+		/*  B */ "", "", "", "", "", "", "", "",
+		/*  C */ "RESET_PEER_N", "HEARTBEAT_OUT", "", "", "", "", "", "",
+		/*  D */ "", "", "", "", "", "", "", "",
+		/*  E */ "DOOM_N", "", "", "", "", "LED_PWR_BLUE", "", "",
+		/*  F */ "", "", "", "", "", "", "", "",
+		/*  G */ "", "", "", "", "", "", "", "",
+		/*  H */ "", "", "", "", "", "", "", "",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "", "", "BMC_ID", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "", "", "", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "LED_GREEN", "", "LED_RED", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "", "",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "HEARTBEAT_IN", "BOARDREV0", "BOARDREV1", "",
+		/*  Z */ "", "", "", "", "", "", "", "",
+		/* AA */ "", "", "", "", "", "", "", "",
+		/* AB */ "", "", "", "";
+
+	/*
+	 * I don't rightly know what this GPIO really *is*, but setting it to
+	 * zero causes the fans to run at full speed, after which setting it
+	 * back to one causes a power output glitch, so install a hog to keep
+	 * it at one as a failsafe to ensure nothing accidentally touches it.
+	 */
+	doom-guardrail-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
new file mode 100644
index 000000000000..24969c82d05e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -0,0 +1,1090 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Bletchley BMC";
+	compatible = "facebook,bletchley-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		bootargs = "console=ttyS4,57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	spi1_gpio: spi1-gpio {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+
+	front_gpio_leds {
+		compatible = "gpio-leds";
+		sys_log_id {
+			default-state = "off";
+			gpios = <&front_leds 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fan_gpio_leds {
+		compatible = "gpio-leds";
+		fan0_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 8 GPIO_ACTIVE_HIGH>;
+		};
+		fan1_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 9 GPIO_ACTIVE_HIGH>;
+		};
+		fan2_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 10 GPIO_ACTIVE_HIGH>;
+		};
+		fan3_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 11 GPIO_ACTIVE_HIGH>;
+		};
+		fan0_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 12 GPIO_ACTIVE_HIGH>;
+		};
+		fan1_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 13 GPIO_ACTIVE_HIGH>;
+		};
+		fan2_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 14 GPIO_ACTIVE_HIGH>;
+		};
+		fan3_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sled1_gpio_leds {
+		compatible = "gpio-leds";
+		sled1_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled1_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled2_gpio_leds {
+		compatible = "gpio-leds";
+		sled2_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled2_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled3_gpio_leds {
+		compatible = "gpio-leds";
+		sled3_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled3_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled4_gpio_leds {
+		compatible = "gpio-leds";
+		sled4_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled4_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled5_gpio_leds {
+		compatible = "gpio-leds";
+		sled5_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled5_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled6_gpio_leds {
+		compatible = "gpio-leds";
+		sled6_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled6_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		presence-sled1 {
+			label = "presence-sled1";
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 2)>;
+		};
+		presence-sled2 {
+			label = "presence-sled2";
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 3)>;
+		};
+		presence-sled3 {
+			label = "presence-sled3";
+			gpios = <&gpio0 ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 4)>;
+		};
+		presence-sled4 {
+			label = "presence-sled4";
+			gpios = <&gpio0 ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 5)>;
+		};
+		presence-sled5 {
+			label = "presence-sled5";
+			gpios = <&gpio0 ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 6)>;
+		};
+		presence-sled6 {
+			label = "presence-sled6";
+			gpios = <&gpio0 ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 7)>;
+		};
+	};
+
+	vbus_sled1: vbus_sled1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled1_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled2: vbus_sled2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled2_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled3: vbus_sled3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled3_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled4: vbus_sled4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled4";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled4_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled5: vbus_sled5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled5";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled5_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled6: vbus_sled6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled6";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled6_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled1_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED1_SWD_MUX", "SLED1_XRES_SWD_N",
+		"SLED1_CLKREQ_N", "SLED1_PCIE_PWR_EN";
+	};
+
+	sled1_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 0) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
+		"SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
+		"SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
+		"SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
+	};
+
+	sled1_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","SLED1_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled1_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 0) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled1>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled2_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED2_SWD_MUX", "SLED2_XRES_SWD_N",
+		"SLED2_CLKREQ_N", "SLED2_PCIE_PWR_EN";
+	};
+
+	sled2_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 1) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
+		"SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
+		"SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
+		"SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
+	};
+
+	sled2_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled2_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 1) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled2>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled3_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED3_SWD_MUX", "SLED3_XRES_SWD_N",
+		"SLED3_CLKREQ_N", "SLED3_PCIE_PWR_EN";
+	};
+
+	sled3_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 2) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
+		"SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
+		"SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
+		"SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
+	};
+
+	sled3_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled3_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled3>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled4_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED4_SWD_MUX", "SLED4_XRES_SWD_N",
+		"SLED4_CLKREQ_N", "SLED4_PCIE_PWR_EN";
+	};
+
+	sled4_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 3) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
+		"SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
+		"SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
+		"SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
+	};
+
+	sled4_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled4_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(S, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled4>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled5_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED5_SWD_MUX", "SLED5_XRES_SWD_N",
+		"SLED5_CLKREQ_N", "SLED5_PCIE_PWR_EN";
+	};
+
+	sled5_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 4) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
+		"SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
+		"SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
+		"SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
+	};
+
+	sled5_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled5_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(Y, 3) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled5>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled6_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED6_SWD_MUX", "SLED6_XRES_SWD_N",
+		"SLED6_CLKREQ_N", "SLED6_PCIE_PWR_EN";
+	};
+
+	sled6_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT",
+		"SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT",
+		"SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY",
+		"SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6";
+	};
+
+	sled6_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","SLED6_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled6_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled6>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+
+	rtc@51 {
+		/* in-chip rtc disabled, use external rtc (battery-backed) */
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	front_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-fault-identify","power-p5v-stby-good",
+		"power-p1v0-dvdd-good","power-p1v0-avdd-good",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	adm1278@11 {
+		compatible = "adi,adm1278";
+		reg = <0x11>;
+		shunt-resistor-micro-ohms = <300>;
+		adi,volt-curr-sample-average = <128>;
+		adi,power-sample-average = <128>;
+	};
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+
+	tmp421@4d {
+		compatible = "ti,tmp421";
+		reg = <0x4d>;
+	};
+
+	fan_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"presence-fan0","presence-fan1",
+		"presence-fan2","presence-fan3",
+		"power-fan0-good","power-fan1-good",
+		"power-fan2-good","power-fan3-good",
+		"","","","",
+		"","","","";
+	};
+};
+
+&i2c13 {
+	multi-master;
+	aspeed,hw-timeout-ms = <1000>;
+	status = "okay";
+
+	//USB Debug Connector
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiov2_unbiased_default>;
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"FUSB302_SLED1_INT_N","FUSB302_SLED2_INT_N",
+			"SEL_SPI2_MUX","SPI2_MUX1",
+			"SPI2_MUX2","SPI2_MUX3",
+			"","FUSB302_SLED3_INT_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"BMC_SLED1_STCK","BMC_SLED2_STCK",
+			"BMC_SLED3_STCK","BMC_SLED4_STCK",
+			"BMC_SLED5_STCK","BMC_SLED6_STCK",
+			"","",
+	/*G0-G7*/	"BSM_FRU_WP","SWITCH_FRU_MUX","","FM_SOL_UART_CH_SEL",
+			"PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","",
+	/*H0-H7*/	"presence-riser1","presence-riser2",
+			"presence-sled1","presence-sled2",
+			"presence-sled3","presence-sled4",
+			"presence-sled5","presence-sled6",
+	/*I0-I7*/	"REV_ID0","",
+			"REV_ID1","REV_ID2",
+			"","BSM_FLASH_WP_STATUS",
+			"BMC_TPM_PRES_N","FUSB302_SLED6_INT_N",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","BMC_RTC_INT","","",
+	/*M0-M7*/	"ALERT_SLED1_N","ALERT_SLED2_N",
+			"ALERT_SLED3_N","ALERT_SLED4_N",
+			"ALERT_SLED5_N","ALERT_SLED6_N",
+			"","USB_DEBUG_PWR_BTN_N",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"","","","",
+			"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
+	/*P0-P7*/	"","","","","","","","BMC_HEARTBEAT",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","BAT_DETECT",
+			"BMC_BT_WP0_N","BMC_BT_WP1_N","","FUSB302_SLED4_INT_N",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"PWRGD_CNS_PSU","RST_BMC_MVL_N",
+			"P12V_AUX_ALERT1_N","PSU_PRSNT",
+			"USB2_SEL0_A","USB2_SEL1_A",
+			"USB2_SEL0_B","USB2_SEL1_B",
+	/*W0-W7*/	"RST_FRONT_IOEXP_N","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"BMC_SELF_HW_RST","BSM_PRSNT_N",
+			"BSM_FLASH_LATCH_N","FUSB302_SLED5_INT_N",
+			"","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&adc0 {
+	vref = <1800>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&mdio0 {
+	status = "okay";
+	/* TODO: Add Marvell 88E6191X */
+};
+
+&mdio3 {
+	status = "okay";
+	/* TODO: Add Marvell 88X3310 */
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_gpiov2_unbiased_default: gpiov2 {
+		pins = "AD14";
+		bias-disable;
+	};
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
new file mode 100644
index 000000000000..14dd0ab64130
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -0,0 +1,1222 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Catalina BMC";
+	compatible = "facebook,catalina-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c1mux0ch0;
+		i2c17 = &i2c1mux0ch1;
+		i2c18 = &i2c1mux0ch2;
+		i2c19 = &i2c1mux0ch3;
+		i2c20 = &i2c1mux0ch4;
+		i2c21 = &i2c1mux0ch5;
+		i2c22 = &i2c1mux0ch6;
+		i2c23 = &i2c1mux0ch7;
+		i2c24 = &i2c0mux0ch0;
+		i2c25 = &i2c0mux0ch1;
+		i2c26 = &i2c0mux0ch2;
+		i2c27 = &i2c0mux0ch3;
+		i2c28 = &i2c0mux1ch0;
+		i2c29 = &i2c0mux1ch1;
+		i2c30 = &i2c0mux1ch2;
+		i2c31 = &i2c0mux1ch3;
+		i2c32 = &i2c0mux2ch0;
+		i2c33 = &i2c0mux2ch1;
+		i2c34 = &i2c0mux2ch2;
+		i2c35 = &i2c0mux2ch3;
+		i2c36 = &i2c0mux3ch0;
+		i2c37 = &i2c0mux3ch1;
+		i2c38 = &i2c0mux3ch2;
+		i2c39 = &i2c0mux3ch3;
+		i2c40 = &i2c0mux4ch0;
+		i2c41 = &i2c0mux4ch1;
+		i2c42 = &i2c0mux4ch2;
+		i2c43 = &i2c0mux4ch3;
+		i2c44 = &i2c0mux5ch0;
+		i2c45 = &i2c0mux5ch1;
+		i2c46 = &i2c0mux5ch2;
+		i2c47 = &i2c0mux5ch3;
+		i2c48 = &i2c5mux0ch0;
+		i2c49 = &i2c5mux0ch1;
+		i2c50 = &i2c5mux0ch2;
+		i2c51 = &i2c5mux0ch3;
+		i2c52 = &i2c5mux0ch4;
+		i2c53 = &i2c5mux0ch5;
+		i2c54 = &i2c5mux0ch6;
+		i2c55 = &i2c5mux0ch7;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	spi1_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "bmc_ready_noled";
+			gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+
+		led-3 {
+			label = "bmc_ready_cpld_noled";
+			gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+	};
+
+	p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p2v5_bmc_aux";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi4_default>;
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	multi-master;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c0mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			mctp-controller;
+
+			// IOB0 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			mctp-controller;
+
+			// IOB0 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux1ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux1ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 0 IOEXP
+			io_expander7: gpio@20 {
+				compatible = "nxp,pca9535";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// IO Mezz 0 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+		i2c0mux1ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux1ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux2ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux2ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux2ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux2ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c0mux3ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			mctp-controller;
+
+			// IOB1 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux3ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux3ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			mctp-controller;
+
+			// IOB1 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux3ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux4ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux4ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 1 IOEXP
+			io_expander8: gpio@21 {
+				compatible = "nxp,pca9535";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// IO Mezz 1 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+		i2c0mux4ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux4ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux5ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux5ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux5ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux5ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			power-sensor@22 {
+				compatible = "mps,mp5990";
+				reg = <0x22>;
+			};
+		};
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		i2c1mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			fanctl2: fan-controller@1 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x01>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&fanctl2 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-11 {
+					pwms = <&fanctl2 0 40000>;
+					tach-ch = /bits/ 8 <0x0b>;
+				};
+				fan-10 {
+					pwms = <&fanctl2 4 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-13 {
+					pwms = <&fanctl2 4 40000>;
+					tach-ch = /bits/ 8 <0x0d>;
+				};
+				fan-15 {
+					pwms = <&fanctl2 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-1 {
+					pwms = <&fanctl2 6 40000>;
+					tach-ch = /bits/ 8 <0x01>;
+				};
+				fan-0 {
+					pwms = <&fanctl2 10 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-3 {
+					pwms = <&fanctl2 10 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+			};
+			fanctl3: fan-controller@2 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x02>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&fanctl3 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-11 {
+					pwms = <&fanctl3 0 40000>;
+					tach-ch = /bits/ 8 <0x0b>;
+				};
+				fan-10 {
+					pwms = <&fanctl3 4 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-13 {
+					pwms = <&fanctl3 4 40000>;
+					tach-ch = /bits/ 8 <0x0d>;
+				};
+				fan-15 {
+					pwms = <&fanctl3 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-1 {
+					pwms = <&fanctl3 6 40000>;
+					tach-ch = /bits/ 8 <0x01>;
+				};
+				fan-0 {
+					pwms = <&fanctl3 10 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-3 {
+					pwms = <&fanctl3 10 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+			};
+			fanctl0: fan-controller@21 {
+				compatible = "maxim,max31790";
+				reg = <0x21>;
+			};
+			fanctl1: fan-controller@27 {
+				compatible = "maxim,max31790";
+				reg = <0x27>;
+			};
+		};
+		i2c1mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		i2c1mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			power-monitor@13 {
+				compatible = "infineon,xdp710";
+				reg = <0x13>;
+			};
+			power-monitor@1c {
+				compatible = "infineon,xdp710";
+				reg = <0x1c>;
+			};
+			power-monitor@42 {
+				compatible = "lltc,ltc4287";
+				reg = <0x42>;
+				shunt-resistor-micro-ohms = <100>;
+			};
+			power-monitor@43 {
+				compatible = "lltc,ltc4287";
+				reg = <0x43>;
+				shunt-resistor-micro-ohms = <100>;
+			};
+		};
+		i2c1mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+
+			// PDB FRU EEPROM
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			// PDB TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+		};
+		i2c1mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+
+			// PDB IOEXP
+			io_expander5: gpio@27 {
+				compatible = "nxp,pca9554";
+				reg = <0x27>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// OSFP IOEXP
+			io_expander6: gpio@25 {
+				compatible = "nxp,pca9555";
+				reg = <0x25>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// OSFP FRU EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+		i2c1mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			// FIO FRU EEPROM
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			// FIO TEMP SENSOR
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			// FIO REMOTE TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	// Module 0 IOEXP
+	io_expander0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// Module 1 IOEXP
+	io_expander1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// HMC IOEXP
+	io_expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// Module 0 EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Module 1 EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c5mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c5mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c5mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+		i2c5mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+		i2c5mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+		i2c5mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			// HDD FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+		i2c5mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	// BMC IOEXP on Module 0
+	io_expander3: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	rtc@6f {
+		compatible = "nuvoton,nct3018y";
+		reg = <0x6f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	// SCM CPLD IOEXP
+	io_expander4: gpio@4f {
+		compatible = "nxp,pca9555";
+		reg = <0x4f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// SCM TEMP SENSOR
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	// SCM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU EEPROM
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC0 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC0 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	multi-master;
+
+	// Module 1 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Secondary CBC FRU EEPROM
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	multi-master;
+
+	// Module 0 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Primary CBC FRU EEPROM
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+
+	// HMC FRU EEPROM
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	// PDB CPLD IOEXP 0x10
+	io_expander9: gpio@10 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x10>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x11
+	io_expander10: gpio@11 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x12
+	io_expander11: gpio@12 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x13
+	io_expander12: gpio@13 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x14
+	io_expander13: gpio@14 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x14>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x15
+	io_expander14: gpio@15 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x15>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC1 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC1 FRU EEPROM
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&adc0 {
+	vref-supply = <&p1v8_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref-supply = <&p2v5_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&pinctrl {
+	pinctrl_ncsi3_default: ncsi3_default {
+		function = "RMII3";
+		groups = "NCSI3";
+	};
+
+	pinctrl_ncsi4_default: ncsi4_default {
+		function = "RMII4";
+		groups = "NCSI4";
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+			"BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+			"IOEXP_INT_L","FM_ID_LED",
+			"","",
+	/*C0-C7*/	"","","","",
+			"PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+			"","BMC_I2C_SSIF_ALERT_L",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","",
+			"FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+	/*H0-H7*/	"PWR_BRAKE_L","RUN_POWER_EN",
+			"SHDN_FORCE_L","SHDN_REQ_L",
+			"","","","",
+	/*I0-I7*/	"","","","",
+			"","FLASH_WP_STATUS",
+			"FM_PDB_HEALTH_N","RUN_POWER_PG",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"PCIE_EP_RST_EN","BMC_FRU_WP",
+			"SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+			"STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+			"CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+			"PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+			"","USBDBG_IPMI_EN_L",
+	/*P0-P7*/	"PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+			"ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+			"host0-ready","BMC_READY_CPLD","","BMC_HEARTBEAT_N",
+	/*Q0-Q7*/	"IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+			"UART_MUX_SEL","I2C_MUX_RESET_L",
+			"RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+			"CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+	/*R0-R7*/	"THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+			"CPU_BOOT_DONE","PMBUS_GNT_L",
+			"CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+			"PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+	/*S0-S7*/	"","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+			"FM_BMC_DEBUG_SW_N","UID_LED_N",
+			"SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+			"BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+			"SMB_BMC_TMP_ALERT","PWR_LED_N",
+			"SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","RST_BMC_SELF_HW",
+			"FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+			"","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&io_expander0 {
+	gpio-line-names =
+		"FPGA_THERM_OVERT_L","FPGA_READY_BMC",
+		"HMC_BMC_DETECT","HMC_PGOOD",
+		"","BMC_SELF_PWR_CYCLE",
+		"FPGA_EROT_FATAL_ERROR_L","WP_HW_EXT_CTRL_L",
+		"EROT_FPGA_RST_L","FPGA_EROT_RECOVERY_L",
+		"BMC_EROT_FPGA_SPI_MUX_SEL","USB2_HUB_RESET_L",
+		"NCSI_CS1_SEL","SGPIO_EN_L",
+		"B2B_IOEXP_INT_L","I2C_BUS_MUX_RESET_L";
+};
+
+&io_expander1 {
+	gpio-line-names =
+		"SEC_FPGA_THERM_OVERT_L","SEC_FPGA_READY_BMC",
+		"","",
+		"","",
+		"SEC_FPGA_EROT_FATAL_ERROR_L","SEC_WP_HW_EXT_CTRL_L",
+		"SEC_EROT_FPGA_RST_L","SEC_FPGA_EROT_RECOVERY_L",
+		"SEC_BMC_EROT_FPGA_SPI_MUX_SEL","",
+		"","",
+		"","SEC_I2C_BUS_MUX_RESET_L";
+};
+
+&io_expander2 {
+	gpio-line-names =
+		"HMC_PRSNT_L","HMC_READY",
+		"HMC_EROT_FATAL_ERROR_L","I2C_MUX_SEL",
+		"HMC_EROT_SPI_MUX_SEL","HMC_EROT_RECOVERY_L",
+		"HMC_EROT_RST_L","GLOBAL_WP_HMC",
+		"FPGA_RST_L","USB2_HUB_RST",
+		"CPU_UART_MUX_SEL","",
+		"","","","";
+};
+
+&io_expander3 {
+	gpio-line-names =
+		"RTC_MUX_SEL","PCI_MUX_SEL","TPM_MUX_SEL","FAN_MUX-SEL",
+		"SGMII_MUX_SEL","DP_MUX_SEL","UPHY3_USB_SEL","NCSI_MUX_SEL",
+		"BMC_PHY_RST","RTC_CLR_L","BMC_12V_CTRL","PS_RUN_IO0_PG",
+		"","","","";
+};
+
+&io_expander4 {
+	gpio-line-names =
+		"stby_power_en_cpld","stby_power_gd_cpld","","",
+		"","","","",
+		"","","","",
+		"","","","";
+};
+
+&io_expander5 {
+	gpio-line-names =
+		"JTAG_MUX_SEL","IOX_BMC_RESET","","",
+		"","","","";
+};
+
+&io_expander6 {
+	gpio-line-names =
+		"OSFP_PHASE_ID0","OSFP_PHASE_ID1",
+		"OSFP_PHASE_ID2","OSFP_PHASE_ID3",
+		"","","","",
+		"OSFP_BOARD_ID0","OSFP_BOARD_ID1",
+		"OSFP_BOARD_ID2","PWRGD_P3V3_N1",
+		"PWRGD_P3V3_N2","","","";
+};
+
+&io_expander7 {
+	gpio-line-names =
+		"RST_CX7_0","RST_CX7_1",
+		"CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L",
+		"CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1",
+		"CX_TWARN_CX0_L","CX_TWARN_CX1_L",
+		"CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1",
+		"FNP_L_CX0","FNP_L_CX1",
+		"","MCU_GPIO","MCU_RST_N","MCU_RECOVERY_N";
+};
+
+&io_expander8 {
+	gpio-line-names =
+		"SEC_RST_CX7_0","SEC_RST_CX7_1",
+		"SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L",
+		"SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1",
+		"SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L",
+		"SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1",
+		"SEC_FNP_L_CX0","SEC_FNP_L_CX1",
+		"","SEC_MCU_GPIO","SEC_MCU_RST_N","SEC_MCU_RECOVERY_N";
+};
+
+&io_expander9 {
+	gpio-line-names =
+		"LEAK3_DETECT_R","LEAK1_DETECT_R",
+		"LEAK2_DETECT_R","LEAK0_DETECT_R",
+		"CHASSIS3_LEAK_Q_N_PLD","CHASSIS1_LEAK_Q_N_PLD",
+		"CHASSIS2_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD",
+		"P12V_AUX_FAN_ALERT_PLD_N","P12V_AUX_FAN_OC_PLD_N",
+		"P12V_AUX_FAN_FAULT_PLD_N","LEAK_DETECT_RMC_N_R",
+		"RSVD_RMC_GPIO3_R","SMB_RJ45_FIO_TMP_ALERT",
+		"","";
+};
+
+&io_expander10 {
+	gpio-line-names =
+		"FM_P12V_NIC1_FLTB_R_N","FM_P3V3_NIC1_FAULT_R_N",
+		"OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+		"P12V_AUX_NIC1_SENSE_ALERT_R_N",
+		"FM_P12V_NIC0_FLTB_R_N","FM_P3V3_NIC0_FAULT_R_N",
+		"OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N",
+		"P12V_AUX_NIC0_SENSE_ALERT_R_N",
+		"P12V_AUX_PSU_SMB_ALERT_R_L","P12V_SCM_SENSE_ALERT_R_N",
+		"NODEB_PSU_SMB_ALERT_R_L","NODEA_PSU_SMB_ALERT_R_L",
+		"P52V_SENSE_ALERT_PLD_N","P48V_HS2_FAULT_N_PLD",
+		"P48V_HS1_FAULT_N_PLD","";
+};
+
+&io_expander11 {
+	gpio-line-names =
+		"FAN_7_PRESENT_N","FAN_6_PRESENT_N",
+		"FAN_5_PRESENT_N","FAN_4_PRESENT_N",
+		"FAN_3_PRESENT_N","FAN_2_PRESENT_N",
+		"FAN_1_PRESENT_N","FAN_0_PRESENT_N",
+		"PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS1_LEAK_CABLE_R_N",
+		"PRSNT_CHASSIS2_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N",
+		"PRSNT_RJ45_FIO_N_R","PRSNT_HDDBD_POWER_CABLE_N",
+		"PRSNT_OSFP_POWER_CABLE_N","";
+};
+
+&io_expander12 {
+	gpio-line-names =
+		"RST_OCP_V3_1_R_N","NIC0_PERST_N",
+		"OCP_SFF_PERST_FROM_HOST_ISO_PLD_N","OCP_SFF_MAIN_PWR_EN",
+		"FM_OCP_SFF_PWR_GOOD_PLD","OCP_SFF_AUX_PWR_PLD_EN_R",
+		"HP_LVC3_OCP_V3_1_PWRGD_PLD","HP_OCP_V3_1_HSC_PWRGD_PLD_R",
+		"RST_OCP_V3_2_R_N","NIC1_PERST_N",
+		"OCP_V3_2_PERST_FROM_HOST_ISO_PLD_N","OCP_V3_2_MAIN_PWR_EN",
+		"FM_OCP_V3_2_PWR_GOOD_PLD","OCP_V3_2_AUX_PWR_PLD_EN_R",
+		"HP_LVC3_OCP_V3_2_PWRGD_PLD","HP_OCP_V3_2_HSC_PWRGD_PLD_R";
+};
+
+&io_expander13 {
+	gpio-line-names =
+		"NODEA_NODEB_PWOK_PLD_ISO_R","PWR_EN_NICS",
+		"PWRGD_P12V_AUX_FAN_PLD","P12V_AUX_FAN_EN_PLD",
+		"PWRGD_P3V3_AUX_PLD","PWRGD_P12V_AUX_PLD_ISO_R",
+		"FM_MAIN_PWREN_FROM_RMC_R","FM_MAIN_PWREN_RMC_EN_ISO_R",
+		"PWRGD_RMC_R","PWRGD_P12V_AUX_FAN_PLD",
+		"P12V_AUX_FAN_EN_PLD","FM_SYS_THROTTLE_N",
+		"HP_LVC3_OCP_V3_2_PRSNT2_PLD_N","HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+		"","";
+};
+
+&io_expander14 {
+	gpio-line-names =
+		"","","","","","","","",
+		"FM_BOARD_BMC_SKU_ID3","FM_BOARD_BMC_SKU_ID2",
+		"FM_BOARD_BMC_SKU_ID1","FM_BOARD_BMC_SKU_ID0",
+		"FAB_BMC_REV_ID2","FAB_BMC_REV_ID1",
+		"FAB_BMC_REV_ID0","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
new file mode 100644
index 000000000000..ecef44d89977
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
@@ -0,0 +1,1283 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Clemente BMC";
+	compatible = "facebook,clemente-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c1mux0ch0;
+		i2c17 = &i2c1mux0ch1;
+		i2c18 = &i2c1mux0ch2;
+		i2c19 = &i2c1mux0ch3;
+		i2c20 = &i2c1mux0ch4;
+		i2c21 = &i2c1mux0ch5;
+		i2c22 = &i2c1mux0ch6;
+		i2c23 = &i2c1mux0ch7;
+		i2c24 = &i2c0mux0ch0;
+		i2c25 = &i2c0mux0ch1;
+		i2c26 = &i2c0mux0ch2;
+		i2c27 = &i2c0mux0ch3;
+		i2c28 = &i2c0mux1ch0;
+		i2c29 = &i2c0mux1ch1;
+		i2c30 = &i2c0mux1ch2;
+		i2c31 = &i2c0mux1ch3;
+		i2c32 = &i2c0mux2ch0;
+		i2c33 = &i2c0mux2ch1;
+		i2c34 = &i2c0mux2ch2;
+		i2c35 = &i2c0mux2ch3;
+		i2c36 = &i2c0mux3ch0;
+		i2c37 = &i2c0mux3ch1;
+		i2c38 = &i2c0mux3ch2;
+		i2c39 = &i2c0mux3ch3;
+		i2c40 = &i2c0mux4ch0;
+		i2c41 = &i2c0mux4ch1;
+		i2c42 = &i2c0mux4ch2;
+		i2c43 = &i2c0mux4ch3;
+		i2c44 = &i2c0mux5ch0;
+		i2c45 = &i2c0mux5ch1;
+		i2c46 = &i2c0mux5ch2;
+		i2c47 = &i2c0mux5ch3;
+		i2c48 = &i2c0mux0ch1mux0ch0;
+		i2c49 = &i2c0mux0ch1mux0ch1;
+		i2c50 = &i2c0mux0ch1mux0ch2;
+		i2c51 = &i2c0mux0ch1mux0ch3;
+		i2c52 = &i2c0mux3ch1mux0ch0;
+		i2c53 = &i2c0mux3ch1mux0ch1;
+		i2c54 = &i2c0mux3ch1mux0ch2;
+		i2c55 = &i2c0mux3ch1mux0ch3;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "bmc_ready_noled";
+			gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+
+		led-3 {
+			label = "bmc_ready_cpld_noled";
+			gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p2v5_bmc_aux";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xbb000000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>;
+		};
+	};
+
+	spi1_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&adc0 {
+	vref-supply = <&p1v8_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref-supply = <&p2v5_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+			"BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+			"IOEXP_INT_L","FM_ID_LED",
+			"","",
+	/*C0-C7*/	"BMC_GPIOC0","","","",
+			"PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+			"","BMC_I2C_SSIF_ALERT_L",
+	/*D0-D7*/	"","","","","BMC_GPIOD4","","","",
+	/*E0-E7*/	"BMC_GPIOE0","BMC_GPIOE1","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","",
+			"FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+	/*H0-H7*/	"PWR_BRAKE_L","RUN_POWER_EN",
+			"SHDN_FORCE_L","SHDN_REQ_L",
+			"","","","",
+	/*I0-I7*/	"","","","",
+			"","FLASH_WP_STATUS",
+			"FM_PDB_HEALTH_N","RUN_POWER_PG",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"PCIE_EP_RST_EN","BMC_FRU_WP",
+			"SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+			"STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+			"CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+			"PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+			"","USBDBG_IPMI_EN_L",
+	/*P0-P7*/	"PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+			"ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+			"host0-ready","BMC_READY_CPLD","BMC_GPIOP6","BMC_HEARTBEAT_N",
+	/*Q0-Q7*/	"IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+			"UART_MUX_SEL","I2C_MUX_RESET_L",
+			"RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+			"CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+	/*R0-R7*/	"THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+			"CPU_BOOT_DONE","PMBUS_GNT_L",
+			"CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+			"PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+	/*S0-S7*/	"","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+			"FM_BMC_DEBUG_SW_N","UID_LED_N",
+			"SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+			"BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+			"SMB_BMC_TMP_ALERT","PWR_LED_N",
+			"SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","RST_BMC_SELF_HW",
+			"FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+			"BMC_GPIOY4","BMC_GPIOY5","","",
+	/*Z0-Z7*/	"","","","","","","BMC_GPIOZ6","BMC_GPIOZ7";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B3*/	"","","","",
+	/*18B4-18B7*/	"FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+	/*18C0-18C7*/	"","","PI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","AC_PWR_BMC_BTN_N","","","","";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// HDD FRU EEPROM
+			eeprom@56 {
+				compatible = "atmel,24c128";
+				reg = <0x56>;
+			};
+
+			// E1.S Backplane
+			i2c0mux0ch1mux0: i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				reg = <0x74>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c0mux0ch1mux0ch0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c0mux0ch1mux0ch1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c0mux0ch1mux0ch2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c0mux0ch1mux0ch3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		i2c0mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux1ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux1ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 0 IOEXP
+			io_expander7: gpio@20 {
+				compatible = "nxp,pca9535";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"RST_CX7_0",
+					"RST_CX7_1",
+					"CX0_SSD0_PRSNT_L",
+					"CX1_SSD1_PRSNT_L",
+					"CX_BOOT_CMPLT_CX0",
+					"CX_BOOT_CMPLT_CX1",
+					"CX_TWARN_CX0_L",
+					"CX_TWARN_CX1_L",
+					"CX_OVT_SHDN_CX0",
+					"CX_OVT_SHDN_CX1",
+					"FNP_L_CX0",
+					"FNP_L_CX1",
+					"",
+					"MCU_GPIO",
+					"MCU_RST_N",
+					"MCU_RECOVERY_N";
+			};
+
+			// IO Mezz 0 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			// OSFP 0 FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+		};
+
+		i2c0mux1ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux1ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux2ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// IOB0 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c0mux2ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c0mux2ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux2ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			// IOB0 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux3ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux3ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// E1.S Backplane HDD FRU EEPROM
+			eeprom@56 {
+				compatible = "atmel,24c128";
+				reg = <0x56>;
+			};
+
+			// E1.S Backplane MUX
+			i2c0mux3ch1mux0: i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				reg = <0x74>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c0mux3ch1mux0ch0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c0mux3ch1mux0ch1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c0mux3ch1mux0ch2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c0mux3ch1mux0ch3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		i2c0mux3ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux3ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux4ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux4ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 1 IOEXP
+			io_expander8: gpio@21 {
+				compatible = "nxp,pca9535";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"SEC_RST_CX7_0",
+					"SEC_RST_CX7_1",
+					"SEC_CX0_SSD0_PRSNT_L",
+					"SEC_CX1_SSD1_PRSNT_L",
+					"SEC_CX_BOOT_CMPLT_CX0",
+					"SEC_CX_BOOT_CMPLT_CX1",
+					"SEC_CX_TWARN_CX0_L",
+					"SEC_CX_TWARN_CX1_L",
+					"SEC_CX_OVT_SHDN_CX0",
+					"SEC_CX_OVT_SHDN_CX1",
+					"SEC_FNP_L_CX0",
+					"SEC_FNP_L_CX1",
+					"",
+					"SEC_MCU_GPIO",
+					"SEC_MCU_RST_N",
+					"SEC_MCU_RECOVERY_N";
+			};
+
+			// IO Mezz 1 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			// OSFP 1 FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+		};
+
+		i2c0mux4ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux4ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux5ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// IOB1 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c0mux5ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c0mux5ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux5ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			// IOB1 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	// PDB
+	power-monitor@12 {
+		compatible = "ti,lm5066i";
+		reg = <0x12>;
+	};
+
+	// PDB
+	power-monitor@14 {
+		compatible = "ti,lm5066i";
+		reg = <0x14>;
+	};
+
+	// Module 0
+	fanctl0: fan-controller@20{
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	// Module 0
+	fanctl1: fan-controller@23{
+		compatible = "maxim,max31790";
+		reg = <0x23>;
+	};
+
+	// Module 1
+	fanctl2: fan-controller@2c{
+		compatible = "maxim,max31790";
+		reg = <0x2c>;
+	};
+
+	// Module 1
+	fanctl3: fan-controller@2f{
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+
+	// Module 0 Leak Sensor
+	adc@34 {
+		compatible = "maxim,max1363";
+		reg = <0x34>;
+	};
+
+	// Module 1 Leak Sensor
+	adc@35 {
+		compatible = "maxim,max1363";
+		reg = <0x35>;
+	};
+
+	// PDB TEMP SENSOR
+	temperature-sensor@4e {
+		compatible = "ti,tmp1075";
+		reg = <0x4e>;
+	};
+
+	// PDB FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	// PDB
+	vrm@60 {
+		compatible = "renesas,raa228004";
+		reg = <0x60>;
+	};
+
+	// PDB
+	vrm@61 {
+		compatible = "renesas,raa228004";
+		reg = <0x61>;
+	};
+
+	// Interposer
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		i2c1mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		i2c1mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+		i2c1mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		i2c1mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+
+			// Interposer TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+
+			// Interposer FRU EEPROM
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+		};
+
+		i2c1mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+
+			// Interposer IOEXP
+			io_expander5: gpio@27 {
+				compatible = "nxp,pca9554";
+				reg = <0x27>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"JTAG_MUX_SEL",
+					"IOX_BMC_RESET",
+					"RTC_CLR_L",
+					"RTC_U77_ALRT_N",
+					"",
+					"PSU_ALERT_N",
+					"",
+					"RST_P12V_STBY_N";
+			};
+		};
+
+		i2c1mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			// FIO TEMP SENSOR
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			// FIO FRU EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	// Module 0, Expander @0x20
+	io_expander0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FPGA_THERM_OVERT_L-I",
+			"FPGA_READY_BMC-I",
+			"HMC_BMC_DETECT-O",
+			"HMC_PGOOD-O",
+			"",
+			"BMC_STBY_CYCLE-O",
+			"FPGA_EROT_FATAL_ERROR_L-I",
+			"WP_HW_EXT_CTRL_L-O",
+			"EROT_FPGA_RST_L-O",
+			"FPGA_EROT_RECOVERY_L-O",
+			"BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"USB2_HUB_RST_L-O",
+			"",
+			"SGPIO_EN_L-O",
+			"B2B_IOEXP_INT_L-I",
+			"I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// Module 1, Expander @0x21
+	io_expander1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"SEC_FPGA_THERM_OVERT_L",
+			"SEC_FPGA_READY_BMC",
+			"SEC_HMC_BMC_DETECT",
+			"SEC_HMC_PGOOD",
+			"",
+			"SEC_BMC_SELF_POWER_CYCLE",
+			"SEC_SEC_FPGA_EROT_FATAL_ERROR_L",
+			"SEC_WP_HW_EXT_CTRL_L",
+			"SEC_EROT_FPGA_RST_L",
+			"SEC_FPGA_EROT_RECOVERY_L",
+			"SEC_BMC_EROT_FPGA_SPI_MUX_SEL",
+			"SEC_USB2_HUB_RST_L",
+			"",
+			"SEC_SGPIO_EN_L",
+			"SEC_IOB_IOEXP_INT_L",
+			"SEC_I2C_BUS_MUX_RESET_L";
+	};
+
+	// HMC Expander @0x27
+	io_expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"HMC_PRSNT_L-I",
+			"HMC_READY-I",
+			"HMC_EROT_FATAL_ERROR_L-I",
+			"I2C_MUX_SEL-O",
+			"HMC_EROT_SPI_MUX_SEL-O",
+			"HMC_EROT_RECOVERY_L-O",
+			"HMC_EROT_RST_L-O",
+			"GLOBAL_WP_HMC-O",
+			"FPGA_RST_L-O",
+			"USB2_HUB_RST-O",
+			"CPU_UART_MUX_SEL-O",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// Module 0 Aux EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Module 1 Aux EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	io_expander3: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"RTC_MUX_SEL",
+			"PCI_MUX_SEL",
+			"TPM_MUX_SEL",
+			"FAN_MUX-SEL",
+			"SGMII_MUX_SEL",
+			"DP_MUX_SEL",
+			"UPHY3_USB_SEL",
+			"NCSI_MUX_SEL",
+			"BMC_PHY_RST",
+			"RTC_CLR_L",
+			"BMC_12V_CTRL",
+			"PS_RUN_IO0_PG",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	rtc@6f {
+		compatible = "nuvoton,nct3018y";
+		reg = <0x6f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+	// SCM TEMP SENSOR BOARD
+	temperature-sensor@4b {
+		compatible = "national,lm75b";
+		reg = <0x4b>;
+	};
+
+	// SCM CPLD IOEXP
+	io_expander4: gpio@4f {
+		compatible = "nxp,pca9555";
+		reg = <0x4f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"stby_power_en_cpld",
+			"stby_power_gd_cpld",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// SCM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU EEPROM
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC0 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC0 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	multi-master;
+
+	// HPM 1 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+	// CBC 2 FRU
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+	// CBC 3 FRU
+	eeprom@55 {
+		compatible = "atmel,24c02";
+		reg = <0x55>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	multi-master;
+
+	// HPM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// CBC 0 FRU
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+
+	// CBC 1 FRU
+	eeprom@55 {
+		compatible = "atmel,24c02";
+		reg = <0x55>;
+	};
+
+	// HMC FRU EEPROM
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	// PDB CPLD IOEXP 0x10
+	io_expander9: gpio@10 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x10>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"wSequence_Latch_State_N",
+			"wP12V_N1N2_RUNTIME_FLT_N",
+			"wP12V_FAN_RUNTIME_FLT_N",
+			"wP12V_AUX_RUNTIME_FLT_N",
+			"wHost_PERST_SEQPWR_FLT_N",
+			"wP12V_N1N2_SEQPWR_FLT_N",
+			"wP12V_FAN_SEQPWR_FLT_N",
+			"wP12V_AUX_SEQPWR_FLT_N",
+			"wP12V_RUNTIME_FLT_NIC1_N",
+			"wAUX_RUNTIME_FLT_NIC1_N",
+			"wP12V_SEQPWR_FLT_NIC1_N",
+			"wAUX_SEQPWR_FLT_NIC1_N",
+			"wP12V_RUNTIME_FLT_NIC0_N",
+			"wAUX_RUNTIME_FLT_NIC0_N",
+			"wP12V_SEQPWR_FLT_NIC0_N",
+			"wAUX_SEQPWR_FLT_NIC0_N";
+	};
+
+	// PDB CPLD IOEXP 0x11
+	io_expander10: gpio@11 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FM_P12V_NIC1_FLTB_R_N",
+			"FM_P3V3_NIC1_FAULT_R_N",
+			"FM_P12V_NIC0_FLTB_R_N",
+			"FM_P3V3_NIC0_FAULT_R_N",
+			"P48V_HS2_FAULT_N_PLD",
+			"P48V_HS1_FAULT_N_PLD",
+			"P12V_AUX_FAN_OC_PLD_N",
+			"P12V_AUX_FAN_FAULT_PLD_N",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"FM_SYS_THROTTLE_N",
+			"OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+			"OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N";
+	};
+
+	// PDB CPLD IOEXP 0x12
+	io_expander11: gpio@12 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"P12V_AUX_PSU_SMB_ALERT_R_L",
+			"P12V_SCM_SENSE_ALERT_R_N",
+			"P12V_AUX_NIC1_SENSE_ALERT_R_N",
+			"P12V_AUX_NIC0_SENSE_ALERT_R_N",
+			"NODEB_PSU_SMB_ALERT_R_L",
+			"NODEA_PSU_SMB_ALERT_R_L",
+			"P12V_AUX_FAN_ALERT_PLD_N",
+			"P52V_SENSE_ALERT_PLD_N",
+			"PRSNT_RJ45_FIO_N_R",
+			"FM_MAIN_PWREN_RMC_EN_ISO_R",
+			"CHASSIS3_LEAK_Q_N_PLD",
+			"CHASSIS2_LEAK_Q_N_PLD",
+			"CHASSIS1_LEAK_Q_N_PLD",
+			"CHASSIS0_LEAK_Q_N_PLD",
+			"",
+			"SMB_RJ45_FIO_TMP_ALERT";
+	};
+
+	// PDB CPLD IOEXP 0x13
+	io_expander12: gpio@13 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FAN_7_PRESENT_N",
+			"FAN_6_PRESENT_N",
+			"FAN_5_PRESENT_N",
+			"FAN_4_PRESENT_N",
+			"FAN_3_PRESENT_N",
+			"FAN_2_PRESENT_N",
+			"FAN_1_PRESENT_N",
+			"FAN_0_PRESENT_N",
+			"HP_LVC3_OCP_V3_2_PRSNT2_PLD_N",
+			"HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+			"PRSNT_HDDBD_POWER_CABLE_N",
+			"PRSNT_OSFP0_POWER_CABLE_N",
+			"PRSNT_CHASSIS3_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS2_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS1_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS0_LEAK_CABLE_R_N";
+	};
+
+	// PDB CPLD IOEXP 0x14
+	io_expander13: gpio@14 {
+		compatible = "nxp,pca9555";
+		reg = <0x14>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"rmc_en_dc_pwr_on",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"leak_config_0",
+			"leak_config_1",
+			"leak_config_2",
+			"leak_config_3",
+			"mfg_led_test_mode_l",
+			"small_leak_err_inj",
+			"large_leak_err_inj",
+			"";
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC1 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC1 FRU EEPROM
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi4_default>;
+	use-ncsi;
+};
+
+&udma {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts
new file mode 100644
index 000000000000..24153868cc00
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts
@@ -0,0 +1,1590 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Backpack CMM BMC";
+	compatible = "facebook,cmm-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+
+		/*
+		 * PCA9548 (1-0077) provides 8 channels for connecting to
+		 * 4 Line Cards and 4 Fabric Cards.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (2-0071) provides 8 channels for connecting to
+		 * Power Distribution Board.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (8-0077) provides 8 channels and the first 4
+		 * channels are connecting to 4 Fan Control Boards.
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		/*
+		 * 2 PCA9548 (18-0070 & 18-0073), 16 channels connecting
+		 * to Line Card #1.
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * 2 PCA9548 (19-0070 & 19-0073), 16 channels connecting
+		 * to Line Card #2.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * 2 PCA9548 (20-0070 & 20-0073), 16 channels connecting
+		 * to Line Card #3.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * 2 PCA9548 (21-0070 & 21-0073), 16 channels connecting
+		 * to Line Card #4.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * 2 PCA9548 (16-0070 & 16-0073), 16 channels connecting
+		 * to Fabric Card #1.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * 2 PCA9548 (17-0070 & 17-0073), 16 channels connecting
+		 * to Fabric Card #2.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * 2 PCA9548 (22-0070 & 22-0073), 16 channels connecting
+		 * to Fabric Card #3.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+		i2c144 = &imux144;
+		i2c145 = &imux145;
+		i2c146 = &imux146;
+		i2c147 = &imux147;
+		i2c148 = &imux148;
+		i2c149 = &imux149;
+		i2c150 = &imux150;
+		i2c151 = &imux151;
+
+		/*
+		 * 2 PCA9548 (23-0070 & 23-0073), 16 channels connecting
+		 * to Fabric Card #4.
+		 */
+		i2c152 = &imux152;
+		i2c153 = &imux153;
+		i2c154 = &imux154;
+		i2c155 = &imux155;
+		i2c156 = &imux156;
+		i2c157 = &imux157;
+		i2c158 = &imux158;
+		i2c159 = &imux159;
+		i2c160 = &imux160;
+		i2c161 = &imux161;
+		i2c162 = &imux162;
+		i2c163 = &imux163;
+		i2c164 = &imux164;
+		i2c165 = &imux165;
+		i2c166 = &imux166;
+		i2c167 = &imux167;
+
+		/*
+		 * PCA9548 (32-0070), 8 channels connecting to Fan Control
+		 # Board #1.
+		 */
+		i2c168 = &imux168;
+		i2c169 = &imux169;
+		i2c170 = &imux170;
+		i2c171 = &imux171;
+		i2c172 = &imux172;
+		i2c173 = &imux173;
+		i2c174 = &imux174;
+		i2c175 = &imux175;
+
+		/*
+		 * PCA9548 (33-0070), 8 channels connecting to Fan Control
+		 # Board #2.
+		 */
+		i2c176 = &imux176;
+		i2c177 = &imux177;
+		i2c178 = &imux178;
+		i2c179 = &imux179;
+		i2c180 = &imux180;
+		i2c181 = &imux181;
+		i2c182 = &imux182;
+		i2c183 = &imux183;
+
+		/*
+		 * PCA9548 (34-0070), 8 channels connecting to Fan Control
+		 # Board #3.
+		 */
+		i2c184 = &imux184;
+		i2c185 = &imux185;
+		i2c186 = &imux186;
+		i2c187 = &imux187;
+		i2c188 = &imux188;
+		i2c189 = &imux189;
+		i2c190 = &imux190;
+		i2c191 = &imux191;
+
+		/*
+		 * PCA9548 (35-0070), 8 channels connecting to Fan Control
+		 # Board #4.
+		 */
+		i2c192 = &imux192;
+		i2c193 = &imux193;
+		i2c194 = &imux194;
+		i2c195 = &imux195;
+		i2c196 = &imux196;
+		i2c197 = &imux197;
+		i2c198 = &imux198;
+		i2c199 = &imux199;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+		bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlycon";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			      <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default
+		     &pinctrl_ncts1_default
+		     &pinctrl_ndcd1_default
+		     &pinctrl_ndsr1_default
+		     &pinctrl_ndtr1_default
+		     &pinctrl_nrts1_default>;
+};
+
+&uart3 {
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default
+		     &pinctrl_ncts3_default
+		     &pinctrl_ndcd3_default
+		     &pinctrl_nri3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c0 {
+	status = "okay";
+};
+
+/*
+ * I2C bus to Line Cards and Fabric Cards.
+ */
+&i2c1 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		/* To Fabric Card #1 */
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #2 */
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #1 */
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux40: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux41: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux42: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux43: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux44: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux45: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux46: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux47: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #2 */
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To LC3 SCM */
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #4 */
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #3 */
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux144: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux145: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux146: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux147: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux148: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux149: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux150: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux151: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #4 */
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux152: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux153: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux154: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux155: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux156: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux157: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux158: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux159: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux160: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux161: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux162: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux163: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux164: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux165: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux166: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux167: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+	};
+};
+
+/*
+ * I2C bus to Power Distribution Board.
+ */
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/*
+ * I2c bus connected with temperature sensors on CMM.
+ */
+&i2c3 {
+	status = "okay";
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c4 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with ADM1278.
+ */
+&i2c5 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander.
+ */
+&i2c6 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander and EPROMs.
+ */
+&i2c7 {
+	status = "okay";
+};
+
+/*
+ * I2C bus to Fan Control Boards.
+ */
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		/* To Fan Control Board #1 */
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux168: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux169: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux170: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux171: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux172: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux173: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux174: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux175: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #2 */
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux176: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux177: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux178: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux179: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux180: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux181: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux182: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux183: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #3 */
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux184: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux185: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux186: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux187: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux188: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux189: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux190: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux191: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #4 */
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux192: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux193: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux194: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux195: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux196: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux197: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux198: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux199: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/*
+ * I2C bus to CMM CPLD.
+ */
+&i2c13 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&vhub {
+	status = "disabled";
+};
+
+&sdhci0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd1_default>;
+};
+
+&sdhci1 {
+	status = "disabled";
+};
+
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x2000000>;
+			label = "flash1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
new file mode 100644
index 000000000000..58c107a1b6cf
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Darwin BMC";
+	compatible = "facebook,darwin-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c0 {
+	eeprom@50 {
+		compatible = "atmel,24c512";
+		reg = <0x50>;
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		     &pinctrl_adc2_default &pinctrl_adc3_default
+		     &pinctrl_adc4_default &pinctrl_adc5_default
+		     &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		     &pinctrl_adc10_default &pinctrl_adc11_default
+		     &pinctrl_adc12_default &pinctrl_adc13_default
+		     &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
new file mode 100644
index 000000000000..ff1009ea1c49
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Elbert BMC";
+	compatible = "facebook,elbert-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+
+		/*
+		 * 8 child channels of PCA9548 2-0075.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * 8 child channels of PCA9548 5-0075.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c2 {
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c5 {
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+/*
+ * BMC's "mac3" controller is connected to BCM53134P's IMP_RGMII port
+ * directly (fixed link, no PHY in between).
+ * Note: BMC's "mdio0" controller is connected to BCM53134P's MDIO
+ * interface, and the MDIO channel will be enabled in dts later, when
+ * BCM53134 is added to "bcm53xx" DSA driver.
+ */
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
new file mode 100644
index 000000000000..aa9576d8ab56
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
@@ -0,0 +1,1256 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Fuji BMC (64MB Datastore)";
+	compatible = "facebook,fuji-data64-bmc", "aspeed,ast2600";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0077) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * PCA9548 (24-0071) provides 8 channels connecting to
+		 * PDB-Left.
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * PCA9548 (25-0072) provides 8 channels connecting to
+		 * PDB-Right.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+
+		/*
+		 * PCA9548 (26-0076) provides 8 channels connecting to
+		 * FCM1.
+		 */
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * PCA9548 (27-0076) provides 8 channels connecting to
+		 * FCM2.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+
+		/*
+		 * PCA9548 (40-0076) provides 8 channels connecting to
+		 * PIM1.
+		 */
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * PCA9548 (41-0076) provides 8 channels connecting to
+		 * PIM2.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+
+		/*
+		 * PCA9548 (42-0076) provides 8 channels connecting to
+		 * PIM3.
+		 */
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * PCA9548 (43-0076) provides 8 channels connecting to
+		 * PIM4.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+
+		/*
+		 * PCA9548 (44-0076) provides 8 channels connecting to
+		 * PIM5.
+		 */
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * PCA9548 (45-0076) provides 8 channels connecting to
+		 * PIM6.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+
+		/*
+		 * PCA9548 (46-0076) provides 8 channels connecting to
+		 * PIM7.
+		 */
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * PCA9548 (47-0076) provides 8 channels connecting to
+		 * PIM8.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <3>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+			   <0>,	/* device reg=<1> does not exist */
+			   <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+
+		eeprom@2 {
+			compatible = "atmel,at93c46d";
+			spi-max-frequency = <250000>;
+			data-size = <16>;
+			spi-cs-high;
+			reg = <2>;
+		};
+	};
+};
+
+&fmc {
+	flash@0 {
+		/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+	};
+};
+
+&i2c0 {
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c2 {
+	/*
+	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+	 * Controller Module).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adm1278@10 {
+				compatible = "adi,adm1278";
+				reg = <0x10>;
+				shunt-resistor-micro-ohms = <1500>;
+			};
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c8 {
+	/*
+	 * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					lp5012@14 {
+						compatible = "ti,lp5012";
+						reg = <0x14>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						multi-led@0 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <0>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "sys";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@1 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <1>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "fan";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@2 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <2>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "psu";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@3 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <3>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "smb";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+					};
+				};
+
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	/*
+	 * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@13 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0d>;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
new file mode 100644
index 000000000000..5dc2a165e441
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+#include "aspeed-bmc-facebook-fuji-data64.dts"
+
+/ {
+	model = "Facebook Fuji BMC";
+	compatible = "facebook,fuji-bmc", "aspeed,ast2600";
+};
+
+&fmc {
+	flash@0 {
+		/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128.dtsi"
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dts
new file mode 100644
index 000000000000..60e875ac2461
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+/dts-v1/;
+
+#include "ast2400-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Galaxy 100 BMC";
+	compatible = "facebook,galaxy100-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 3>, <&adc 4>, <&adc 8>, <&adc 9>;
+	};
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&fmc {
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1@0 {
+				reg = <0x0 0x2000000>;
+				label = "flash1";
+			};
+		};
+	};
+};
+
+
+&i2c9 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
new file mode 100644
index 000000000000..49914a4a179f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Greatlakes BMC";
+	compatible = "facebook,greatlakes-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 2>, <&adc1 3>, <&adc1 4>,
+				<&adc1 5>, <&adc1 6>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	no-hw-checksum;
+	use-ncsi;
+	mellanox,multi-host;
+	ncsi-ctrl,start-redo-probe;
+	ncsi-ctrl,no-channel-monitor;
+	ncsi-package = <1>;
+	ncsi-channel = <1>;
+	ncsi-rexmit = <1>;
+	ncsi-timeout = <2>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc2";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+	mctp-controller;
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	// NIC EEPROM
+	eeprom@50 {
+		compatible = "st,24c32";
+		reg = <0x50>;
+	};
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	temperature-sensor@4f {
+		compatible = "national,lm75";
+		reg = <0x4f>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+			&pinctrl_adc2_default &pinctrl_adc3_default
+			&pinctrl_adc4_default &pinctrl_adc5_default
+			&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
+			&pinctrl_adc11_default &pinctrl_adc12_default
+			&pinctrl_adc13_default &pinctrl_adc14_default>;
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
+
+	gpio-line-names =
+	/*A0-A7*/ "","","","","","","","",
+	/*B0-B7*/ "power-bmc-nic","presence-ocp-debug",
+		  "power-bmc-slot1","power-bmc-slot2",
+		  "power-bmc-slot3","power-bmc-slot4","","",
+	/*C0-C7*/ "presence-ocp-nic","","","reset-cause-nic-primary",
+		  "reset-cause-nic-secondary","","","",
+	/*D0-D7*/ "","","","","","","","",
+	/*E0-E7*/ "","","","","","","","",
+	/*F0-F7*/ "slot1-bmc-reset-button","slot2-bmc-reset-button",
+		  "slot3-bmc-reset-button","slot4-bmc-reset-button",
+		  "","","","presence-emmc",
+	/*G0-G7*/ "","","","","","","","",
+	/*H0-H7*/ "","","","",
+		  "presence-mb-slot1","presence-mb-slot2",
+		  "presence-mb-slot3","presence-mb-slot4",
+	/*I0-I7*/ "","","","","","","bb-bmc-button","",
+	/*J0-J7*/ "","","","","","","","",
+	/*K0-K7*/ "","","","","","","","",
+	/*L0-L7*/ "","","","","","","","",
+	/*M0-M7*/ "","power-nic-bmc-enable","","usb-bmc-enable","","reset-cause-usb-hub","","",
+	/*N0-N7*/ "","","","","bmc-ready","","","",
+	/*O0-O7*/ "","","","","","","fan0-bmc-cpld-enable","fan1-bmc-cpld-enable",
+	/*P0-P7*/ "fan2-bmc-cpld-enable","fan3-bmc-cpld-enable",
+		  "reset-cause-pcie-slot1","reset-cause-pcie-slot2",
+		  "reset-cause-pcie-slot3","reset-cause-pcie-slot4","","",
+	/*Q0-Q7*/ "","","","","","","","",
+	/*R0-R7*/ "","","","","","","","",
+	/*S0-S7*/ "","","power-p5v-usb","presence-bmc-tpm","","","","",
+	/*T0-T7*/ "","","","","","","","",
+	/*U0-U7*/ "","","","","","","","GND",
+	/*V0-V7*/ "bmc-slot1-ac-button","bmc-slot2-ac-button",
+		  "bmc-slot3-ac-button","bmc-slot4-ac-button",
+		  "","","","",
+	/*W0-W7*/ "","","","","","","","",
+	/*X0-X7*/ "","","","","","","","",
+	/*Y0-Y7*/ "","","","reset-cause-emmc","","","","",
+	/*Z0-Z7*/ "","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
new file mode 100644
index 000000000000..b733efe31e8d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -0,0 +1,822 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Harma";
+	compatible = "facebook,harma-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart4;
+		serial4 = &uart5;
+
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		spi1 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 124 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+// HOST BIOS Debug
+&uart1 {
+	status = "okay";
+};
+
+// SOL Host Console
+&uart2 {
+	status = "okay";
+	pinctrl-0 = <>;
+};
+
+// SOL BMC Console
+&uart4 {
+	status = "okay";
+	pinctrl-0 = <>;
+};
+
+// BMC Debug Console
+&uart5 {
+	status = "okay";
+};
+
+// MTIA
+&uart6 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+// BIOS Flash
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	pwm@5e {
+		compatible = "maxim,max31790";
+		reg = <0x5e>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina238";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina238";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina238";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <116 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","fcb2-activate",
+		"","";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	// MB NIC FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	pwm@5e {
+		compatible = "maxim,max31790";
+		reg = <0x5e>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina238";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina238";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina238";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <114 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","fcb1-activate",
+		"","";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux20: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			//Retimer Flash
+			eeprom@50 {
+				compatible = "atmel,24c2048";
+				reg = <0x50>;
+				pagesize = <128>;
+			};
+		};
+		imux21: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			retimer@24 {
+				compatible = "asteralabs,pt5161l";
+				reg = <0x24>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	// PDB FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	power-monitor@69 {
+		compatible = "pmbus";
+		reg = <0x69>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	power-monitor@44 {
+		compatible = "lltc,ltc4287";
+		reg = <0x44>;
+		shunt-resistor-micro-ohms = <250>;
+	};
+
+	power-monitor@40 {
+		compatible = "infineon,xdp710";
+		reg = <0x40>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <500>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux22: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+		};
+		imux23: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	mctp-controller;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@30 {
+		compatible = "nxp,pca9555";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	gpio@31 {
+		compatible = "nxp,pca9555";
+		reg = <0x31>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PTTV FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	gpio@13 {
+		compatible = "nxp,pca9555";
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <222 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","health-mmc",
+		"","",
+		"","",
+		"","",
+		"","";
+	};
+
+	gpio@30 {
+		compatible = "nxp,pca9555";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	gpio@31 {
+		compatible = "nxp,pca9555";
+		reg = <0x31>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// Aegis FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	retimer@24 {
+		compatible = "asteralabs,pt5161l";
+		reg = <0x24>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			power-sensor@20 {
+				compatible = "mps,mp5990";
+				reg = <0x20>;
+			};
+			power-monitor@61 {
+				compatible = "isil,isl69260";
+				reg = <0x61>;
+			};
+			power-monitor@62 {
+				compatible = "isil,isl69260";
+				reg = <0x62>;
+			};
+			power-monitor@63 {
+				compatible = "isil,isl69260";
+				reg = <0x63>;
+			};
+			power-monitor@64 {
+				compatible = "infineon,xdpe152c4";
+				reg = <0x64>;
+			};
+			power-monitor@66 {
+				compatible = "infineon,xdpe152c4";
+				reg = <0x66>;
+			};
+			power-monitor@68 {
+				compatible = "infineon,xdpe152c4";
+				reg = <0x68>;
+			};
+		};
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			//MB FRU
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			adc@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+		};
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+// To Debug card
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	// SCM FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","",
+			"bmc-spi-mux-select-0","led-identify","","",
+	/*C0-C7*/	"reset-cause-platrst","","","","",
+			"power-hsc-good","power-chassis-good","",
+	/*D0-D7*/	"","","sol-uart-select","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","",
+			"leakage-detect-alert","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"led-postcode-0","led-postcode-1",
+			"led-postcode-2","led-postcode-3",
+			"led-postcode-4","led-postcode-5",
+			"led-postcode-6","led-postcode-7",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"power-button","power-host-control",
+			"reset-button","","led-power","","","",
+	/*Q0-Q7*/
+			"","","","",
+			"","power-chassis-control","","uart-switch-button",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","led-identify-gate","",
+	/*V0-V7*/	"","","","",
+			"","",
+			"","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","presence-post-card","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "ac-power-button","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","","","","","","";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out - in - out */
+	/*A0-A3 line 0-7*/
+	"presence-scm-cable","power-config-disable-e1s-0",
+	"","",
+	"","power-config-disable-e1s-1",
+	"","",
+	/*A4-A7 line 8-15*/
+	"","power-config-asic-module-enable",
+	"power-p3v3-standby","power-config-asic-power-good",
+	"power-p1v8-good","power-config-pdb-power-good",
+	"presence-cpu","smi-control-n",
+	/*B0-B3 line 16-23*/
+	"","nmi-control-n",
+	"power-pvdd33-s5","nmi-control-sync-flood-n",
+	"","",
+	"power-pvdd18-s5","",
+	/*B4-B7 line 24-31*/
+	"","FM_CPU_SP5R1",
+	"reset-cause-rsmrst","FM_CPU_SP5R2",
+	"","FM_CPU_SP5R3",
+	"","FM_CPU_SP5R4",
+	/*C0-C3 line 32-39*/
+	"","FM_CPU0_SA0",
+	"","FM_CPU0_SA1",
+	"","rt-cpu0-p0-enable",
+	"","rt-cpu0-p1-enable",
+	/*C4-C7 line 40-47*/
+	"","smb-rt-rom-p0-select",
+	"","smb-rt-rom-p1-select",
+	"","i3c-cpu-mux0-oe-n",
+	"","i3c-cpu-mux0-select",
+	/*D0-D3 line 48-55*/
+	"","i3c-cpu-mux1-oe-n",
+	"","i3c-cpu-mux1-select",
+	"","reset-control-bmc",
+	"","reset-control-cpu0-p0-mux",
+	/*D4-D7 line 56-63*/
+	"","reset-control-cpu0-p1-mux",
+	"","reset-control-e1s-mux",
+	"power-host-good","reset-control-mb-mux",
+	"host0-ready","reset-control-smb-e1s-0",
+	/*E0-E3 line 64-71*/
+	"","reset-control-smb-e1s-1",
+	"post-end-n","reset-control-srst",
+	"presence-e1s-0","reset-control-usb-hub",
+	"","reset-control",
+	/*E4-E7 line 72-79*/
+	"presence-e1s-1","reset-control-cpu-kbrst",
+	"","reset-control-platrst",
+	"","bmc-jtag-mux-select-0",
+	"","bmc-jtag-mux-select-1",
+	/*F0-F3 line 80-87*/
+	"","bmc-jtag-select",
+	"","bmc-ready-n",
+	"","bmc-ready-sgpio",
+	"","rt-cpu0-p0-force-enable",
+	/*F4-F7 line 88-95*/
+	"presence-asic-modules-0","rt-cpu0-p1-force-enable",
+	"presence-asic-modules-1","bios-debug-msg-disable",
+	"power-asic-good","uart-control-buffer-select",
+	"presence-cmm","ac-control-n",
+	/*G0-G3 line 96-103*/
+	"FM_CPU_CORETYPE2","",
+	"FM_CPU_CORETYPE1","rtc-battery-voltage-read-enable",
+	"FM_CPU_CORETYPE0","",
+	"FM_BOARD_REV_ID5","",
+	/*G4-G7 line 104-111*/
+	"FM_BOARD_REV_ID4","",
+	"FM_BOARD_REV_ID3","",
+	"FM_BOARD_REV_ID2","",
+	"FM_BOARD_REV_ID1","",
+	/*H0-H3 line 112-119*/
+	"FM_BOARD_REV_ID0","reset-control-cmos-clear",
+	"","","","","","",
+	/*H4-H7 line 120-127*/
+	"","",
+	"reset-control-pcie-expansion-3","",
+	"reset-control-pcie-expansion-2","",
+	"reset-control-pcie-expansion-1","",
+	/*I0-I3 line 128-135*/
+	"reset-control-pcie-expansion-0","",
+	"FM_EXP_SLOT_ID1","",
+	"FM_EXP_SLOT_ID0","",
+	"","",
+	/*I4-I7 line 136-143*/
+	"","","","","","","","",
+	/*J0-J3 line 144-151*/
+	"","","power-card-enable","","","","","",
+	/*J4-J7 line 152-159*/
+	"SLOT_ID_BCB_0","",
+	"SLOT_ID_BCB_1","",
+	"SLOT_ID_BCB_2","",
+	"SLOT_ID_BCB_3","",
+	/*K0-K3 line 160-167*/
+	"","","","","","","P0_I3C_APML_ALERT_L","",
+	/*K4-K7 line 168-175*/
+	"","","","","","","irq-uv-detect-alert","",
+	/*L0-L3 line 176-183*/
+	"irq-hsc-alert","",
+	"cpu0-prochot-alert","",
+	"cpu0-thermtrip-alert","",
+	"reset-cause-pcie","",
+	/*L4-L7 line 184-191*/
+	"pvdd11-ocp-alert","",
+	"power-fault-n","",
+	"asic0-card-type-detection0-n","",
+	"asic0-card-type-detection1-n","",
+	/*M0-M3 line 192-199*/
+	"asic0-card-type-detection2-n","",
+	"uart-switch-lsb","",
+	"uart-switch-msb","",
+	"power-12v-memory-good","",
+	/*M4-M7 line 200-207*/
+	"","","","","","","","",
+	/*N0-N3 line 208-215*/
+	"","","","","","","","",
+	/*N4-N7 line 216-223*/
+	"","","","","","","","",
+	/*O0-O3 line 224-231*/
+	"","",
+	"irq-pvddcore0-ocp-alert","",
+	"irq-pvddcore1-ocp-alert","",
+	"","",
+	/*O4-O7 line 232-239*/
+	"","","","","","","","",
+	/*P0-P3 line 240-247*/
+	"","","","","","","","",
+	/*P4-P7 line 248-255*/
+	"","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
new file mode 100644
index 000000000000..eb8d4b95596c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
@@ -0,0 +1,1619 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2023 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Minerva CMM";
+	compatible = "facebook,minerva-cmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		serial5 = &uart6;
+		/*
+		 * PCA9548 (2-0077) provides 8 channels connecting to
+		 * 6 pcs of FCB (Fan Controller Board).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		spi1 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = "serial5:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "fan_status_led";
+			gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-4 {
+			label = "fan_fault_led_n";
+			gpios = <&leds_gpio 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-5 {
+			label = "bmc_ready_noled";
+			gpios = <&sgpiom0 141 (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+	};
+
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&uart6 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	power-monitor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@44 {
+		compatible = "lltc,ltc4287";
+		reg = <0x44>;
+		shunt-resistor-micro-ohms = <2000>;
+	};
+
+	power-monitor@43 {
+		compatible = "infineon,xdp710";
+		reg = <0x43>;
+	};
+
+	leds_gpio: gpio@19 {
+		compatible = "nxp,pca9555";
+		reg = <0x19>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@11 {
+		compatible = "nxp,pca9555";
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <238 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"PWRGD_P24V_SMPWROK", "P1V5_PWROK",
+		"P3V3_PWROK", "P5V_PWROK",
+		"P12V_SCM_PWROK", "P12V_PWROK",
+		"P24V_PWROK", "P48V_HSC_PWROK",
+		"ERR_GPIO_IRQ", "TMP75_ALERT_N",
+		"BMC_PWROK", "P12V_INA230_ALERT_N",
+		"P24V_INA230_ALERT_N","",
+		"P48V_HSC_ALERT_N", "P1V05_PWROK";
+	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <240 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"P1V05_PWR_FAIL", "P1V5_PWR_FAIL",
+		"P24V_PWR_FAIL", "P24V_SM_PWR_FAIL",
+		"IRQ_NW0/1/2_N", "IRQ_NW3/4/5_N",
+		"RTC_INT_N_R", "ERR_GPIO_IRQ",
+		"", "",
+		"", "",
+		"", "",
+		"", "";
+	};
+
+	gpio@13 {
+		compatible = "nxp,pca9555";
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <242 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"", "",
+		"", "",
+		"", "",
+		"", "",
+		"RACKMON_A_1", "RACKMON_A_2",
+		"RACKMON_B_1", "RACKMON_B_2",
+		"", "",
+		"", "";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		// FCB 1
+		imux16: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN1_PWRGD_R", "P48V_FAN2_PWRGD_R",
+				"P48V_FAN3_PWRGD_R", "P48V_FAN4_PWRGD_R",
+				"FCB_1_P48V_ZONE0_PWRGD_R", "FCB_1_P48V_ZONE1_PWRGD_R",
+				"FCB_1_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN1_ALERT_N", "INA238_FAN2_ALERT_N",
+				"INA238_FAN3_ALERT_N", "INA238_FAN4_ALERT_N",
+				"FCB_1_TMP75_ALERT_N", "",
+				"", "",
+				"FAN1_PRSNT", "FAN2_PRSNT",
+				"FAN3_PRSNT", "FAN4_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN1_IL_TACH_ALERT", "FAN1_OL_TACH_ALERT",
+				"FAN2_IL_TACH_ALERT", "FAN2_OL_TACH_ALERT",
+				"FAN3_IL_TACH_ALERT", "FAN3_OL_TACH_ALERT",
+				"FAN4_IL_TACH_ALERT", "FAN4_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_1_P1V0_POWER_FAIL", "FCB_1_P1V8_POWER_FAIL",
+				"FCB_1_P48V_ZONE0_POWER_FAIL", "FAN1_POWER_FAIL",
+				"FAN2_POWER_FAIL", "FAN3_POWER_FAIL",
+				"FAN4_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 2
+		imux17: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN5_PWRGD_R", "P48V_FAN6_PWRGD_R",
+				"P48V_FAN7_PWRGD_R", "P48V_FAN8_PWRGD_R",
+				"FCB_2_P48V_ZONE0_PWRGD_R", "FCB_2_P48V_ZONE1_PWRGD_R",
+				"FCB_2_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN5_ALERT_N", "INA238_FAN6_ALERT_N",
+				"INA238_FAN7_ALERT_N", "INA238_FAN8_ALERT_N",
+				"FCB_2_TMP75_ALERT_N", "",
+				"", "",
+				"FAN5_PRSNT", "FAN6_PRSNT",
+				"FAN7_PRSNT", "FAN8_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN5_IL_TACH_ALERT", "FAN5_OL_TACH_ALERT",
+				"FAN6_IL_TACH_ALERT", "FAN6_OL_TACH_ALERT",
+				"FAN7_IL_TACH_ALERT", "FAN7_OL_TACH_ALERT",
+				"FAN8_IL_TACH_ALERT", "FAN8_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_2_P1V0_POWER_FAIL", "FCB_2_P1V8_POWER_FAIL",
+				"FCB_2_P48V_ZONE0_POWER_FAIL", "FAN5_POWER_FAIL",
+				"FAN6_POWER_FAIL", "FAN7_POWER_FAIL",
+				"FAN8_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 3
+		imux18: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN9_PWRGD_R", "P48V_FAN10_PWRGD_R",
+				"P48V_FAN11_PWRGD_R", "P48V_FAN12_PWRGD_R",
+				"FCB_3_P48V_ZONE0_PWRGD_R", "FCB_3_P48V_ZONE1_PWRGD_R",
+				"FCB_3_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN9_ALERT_N", "INA238_FAN10_ALERT_N",
+				"INA238_FAN11_ALERT_N", "INA238_FAN12_ALERT_N",
+				"FCB_3_TMP75_ALERT_N", "",
+				"", "",
+				"FAN9_PRSNT", "FAN10_PRSNT",
+				"FAN11_PRSNT", "FAN12_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN9_IL_TACH_ALERT", "FAN9_OL_TACH_ALERT",
+				"FAN10_IL_TACH_ALERT", "FAN10_OL_TACH_ALERT",
+				"FAN11_IL_TACH_ALERT", "FAN11_OL_TACH_ALERT",
+				"FAN12_IL_TACH_ALERT", "FAN12_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_3_P1V0_POWER_FAIL", "FCB_3_P1V8_POWER_FAIL",
+				"FCB_3_P48V_ZONE0_POWER_FAIL", "FAN9_POWER_FAIL",
+				"FAN10_POWER_FAIL", "FAN11_POWER_FAIL",
+				"FAN12_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 4
+		imux19: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN13_PWRGD_R", "P48V_FAN14_PWRGD_R",
+				"P48V_FAN15_PWRGD_R", "P48V_FAN16_PWRGD_R",
+				"FCB_4_P48V_ZONE0_PWRGD_R", "FCB_4_P48V_ZONE1_PWRGD_R",
+				"FCB_4_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN13_ALERT_N", "INA238_FAN14_ALERT_N",
+				"INA238_FAN15_ALERT_N", "INA238_FAN16_ALERT_N",
+				"FCB_4_TMP75_ALERT_N", "",
+				"", "",
+				"FAN13_PRSNT", "FAN14_PRSNT",
+				"FAN15_PRSNT", "FAN16_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN13_IL_TACH_ALERT", "FAN13_OL_TACH_ALERT",
+				"FAN14_IL_TACH_ALERT", "FAN14_OL_TACH_ALERT",
+				"FAN15_IL_TACH_ALERT", "FAN15_OL_TACH_ALERT",
+				"FAN16_IL_TACH_ALERT", "FAN16_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_4_P1V0_POWER_FAIL", "FCB_4_P1V8_POWER_FAIL",
+				"FCB_4_P48V_ZONE0_POWER_FAIL", "FAN13_POWER_FAIL",
+				"FAN14_POWER_FAIL", "FAN15_POWER_FAIL",
+				"FAN16_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 5
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN20_PWRGD_R", "P48V_FAN19_PWRGD_R",
+				"P48V_FAN18_PWRGD_R", "P48V_FAN17_PWRGD_R",
+				"FCB_5_P48V_ZONE0_PWRGD_R", "FCB_5_P48V_ZONE1_PWRGD_R",
+				"FCB_5_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN20_ALERT_N", "INA238_FAN19_ALERT_N",
+				"INA238_FAN18_ALERT_N", "INA238_FAN17_ALERT_N",
+				"FCB_5_TMP75_ALERT_N", "",
+				"", "",
+				"FAN20_PRSNT", "FAN19_PRSNT",
+				"FAN18_PRSNT", "FAN17_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN20_IL_TACH_ALERT", "FAN20_OL_TACH_ALERT",
+				"FAN19_IL_TACH_ALERT", "FAN19_OL_TACH_ALERT",
+				"FAN18_IL_TACH_ALERT", "FAN18_OL_TACH_ALERT",
+				"FAN17_IL_TACH_ALERT", "FAN17_OL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_5_P1V0_POWER_FAIL", "FCB_5_P1V8_POWER_FAIL",
+				"FCB_5_P48V_ZONE0_POWER_FAIL", "FAN20_POWER_FAIL",
+				"FAN19_POWER_FAIL", "FAN18_POWER_FAIL",
+				"FAN17_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 6
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN24_PWRGD_R", "P48V_FAN23_PWRGD_R",
+				"P48V_FAN22_PWRGD_R", "P48V_FAN21_PWRGD_R",
+				"FCB_6_P48V_ZONE0_PWRGD_R", "FCB_6_P48V_ZONE1_PWRGD_R",
+				"FCB_6_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN24_ALERT_N", "INA238_FAN23_ALERT_N",
+				"INA238_FAN22_ALERT_N", "INA238_FAN21_ALERT_N",
+				"FCB_6_TMP75_ALERT_N", "",
+				"", "",
+				"FAN24_PRSNT", "FAN23_PRSNT",
+				"FAN22_PRSNT", "FAN21_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN24_IL_TACH_ALERT", "FAN24_OL_TACH_ALERT",
+				"FAN23_IL_TACH_ALERT", "FAN23_OL_TACH_ALERT",
+				"FAN22_IL_TACH_ALERT", "FAN22_OL_TACH_ALERT",
+				"FAN21_IL_TACH_ALERT", "FAN21_OL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_6_P1V0_POWER_FAIL", "FCB_6_P1V8_POWER_FAIL",
+				"FCB_6_P48V_ZONE0_POWER_FAIL", "FAN24_POWER_FAIL",
+				"FAN23_POWER_FAIL", "FAN22_POWER_FAIL",
+				"FAN21_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux36: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux37: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux38: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux39: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux44: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux45: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux46: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux47: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","BLADE_UART_SEL2","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","BLADE_UART_SEL0","","","",
+	/*M0-M7*/	"","","","","","BLADE_UART_SEL1","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","power-chassis-control","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","host0-ready",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","BAT_DETECT","","power-chassis-good","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","BLADE_UART_SEL3","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&sgpiom0 {
+	gpio-line-names =
+	/*"input pin","output pin"*/
+	/*A0 - A7*/
+	"PRSNT_MTIA_BLADE1_N","PWREN_MTIA_BLADE1_EN_N",
+	"PRSNT_MTIA_BLADE2_N","PWREN_MTIA_BLADE2_EN_N",
+	"PRSNT_MTIA_BLADE3_N","PWREN_MTIA_BLADE3_EN_N",
+	"PRSNT_MTIA_BLADE4_N","PWREN_MTIA_BLADE4_EN_N",
+	"PRSNT_MTIA_BLADE5_N","PWREN_MTIA_BLADE5_EN_N",
+	"PRSNT_MTIA_BLADE6_N","PWREN_MTIA_BLADE6_EN_N",
+	"PRSNT_MTIA_BLADE7_N","PWREN_MTIA_BLADE7_EN_N",
+	"PRSNT_MTIA_BLADE8_N","PWREN_MTIA_BLADE8_EN_N",
+	/*B0 - B7*/
+	"PRSNT_MTIA_BLADE9_N","PWREN_MTIA_BLADE9_EN_N",
+	"PRSNT_MTIA_BLADE10_N","PWREN_MTIA_BLADE10_EN_N",
+	"PRSNT_MTIA_BLADE11_N","PWREN_MTIA_BLADE11_EN_N",
+	"PRSNT_MTIA_BLADE12_N","PWREN_MTIA_BLADE12_EN_N",
+	"PRSNT_MTIA_BLADE13_N","PWREN_MTIA_BLADE13_EN_N",
+	"PRSNT_MTIA_BLADE14_N","PWREN_MTIA_BLADE14_EN_N",
+	"PRSNT_MTIA_BLADE15_N","PWREN_MTIA_BLADE15_EN_N",
+	"PRSNT_MTIA_BLADE16_N","PWREN_MTIA_BLADE16_EN_N",
+	/*C0 - C7*/
+	"PRSNT_NW_BLADE1_N","PWREN_NW_BLADE1_EN_N",
+	"PRSNT_NW_BLADE2_N","PWREN_NW_BLADE2_EN_N",
+	"PRSNT_NW_BLADE3_N","PWREN_NW_BLADE3_EN_N",
+	"PRSNT_NW_BLADE4_N","PWREN_NW_BLADE4_EN_N",
+	"PRSNT_NW_BLADE5_N","PWREN_NW_BLADE5_EN_N",
+	"PRSNT_NW_BLADE6_N","PWREN_NW_BLADE6_EN_N",
+	"PRSNT_FCB_1_N","PWREN_MTIA_BLADE1_HSC_EN_N",
+	"PRSNT_FCB_2_N","PWREN_MTIA_BLADE2_HSC_EN_N",
+	/*D0 - D7*/
+	"PRSNT_FCB_3_N","PWREN_MTIA_BLADE3_HSC_EN_N",
+	"PRSNT_FCB_4_N","PWREN_MTIA_BLADE4_HSC_EN_N",
+	"PRSNT_FCB_6_N","PWREN_MTIA_BLADE5_HSC_EN_N",
+	"PRSNT_FCB_5_N","PWREN_MTIA_BLADE6_HSC_EN_N",
+	"PWRGD_MTIA_BLADE1_PWROK_N","PWREN_MTIA_BLADE7_HSC_EN_N",
+	"PWRGD_MTIA_BLADE2_PWROK_N","PWREN_MTIA_BLADE8_HSC_EN_N",
+	"PWRGD_MTIA_BLADE3_PWROK_N","PWREN_MTIA_BLADE9_HSC_EN_N",
+	"PWRGD_MTIA_BLADE4_PWROK_N","PWREN_MTIA_BLADE10_HSC_EN_N",
+	/*E0 - E7*/
+	"PWRGD_MTIA_BLADE5_PWROK_N","PWREN_MTIA_BLADE11_HSC_EN_N",
+	"PWRGD_MTIA_BLADE6_PWROK_N","PWREN_MTIA_BLADE12_HSC_EN_N",
+	"PWRGD_MTIA_BLADE7_PWROK_N","PWREN_MTIA_BLADE13_HSC_EN_N",
+	"PWRGD_MTIA_BLADE8_PWROK_N","PWREN_MTIA_BLADE14_HSC_EN_N",
+	"PWRGD_MTIA_BLADE9_PWROK_N","PWREN_MTIA_BLADE15_HSC_EN_N",
+	"PWRGD_MTIA_BLADE10_PWROK_N","PWREN_MTIA_BLADE16_HSC_EN_N",
+	"PWRGD_MTIA_BLADE11_PWROK_N","PWREN_NW_BLADE1_HSC_EN_N",
+	"PWRGD_MTIA_BLADE12_PWROK_N","PWREN_NW_BLADE2_HSC_EN_N",
+	/*F0 - F7*/
+	"PWRGD_MTIA_BLADE13_PWROK_N","PWREN_NW_BLADE3_HSC_EN_N",
+	"PWRGD_MTIA_BLADE14_PWROK_N","PWREN_NW_BLADE4_HSC_EN_N",
+	"PWRGD_MTIA_BLADE15_PWROK_N","PWREN_NW_BLADE5_HSC_EN_N",
+	"PWRGD_MTIA_BLADE16_PWROK_N","PWREN_NW_BLADE6_HSC_EN_N",
+	"PWRGD_NW_BLADE1_PWROK_N","PWREN_SGPIO_FCB_2_EN_N",
+	"PWRGD_NW_BLADE2_PWROK_N","PWREN_SGPIO_FCB_1_EN_N",
+	"PWRGD_NW_BLADE3_PWROK_N","PWREN_SGPIO_FCB_4_EN_N",
+	"PWRGD_NW_BLADE4_PWROK_N","PWREN_SGPIO_FCB_3_EN_N",
+	/*G0 - G7*/
+	"PWRGD_NW_BLADE5_PWROK_N","PWREN_SGPIO_FCB_5_EN_N",
+	"PWRGD_NW_BLADE6_PWROK_N","PWREN_SGPIO_FCB_6_EN_N",
+	"PWRGD_FCB_1","FM_BMC_RST_RTCRST_R",
+	"PWRGD_FCB_2","",
+	"PWRGD_FCB_3","FM_MDIO_SW_SEL",
+	"PWRGD_FCB_4","FM_P24V_SMPWR_EN",
+	"PWRGD_FCB_6","",
+	"PWRGD_FCB_5","",
+	/*H0 - H7*/
+	"LEAK_DETECT_MTIA_BLADE1_N","",
+	"LEAK_DETECT_MTIA_BLADE2_N","",
+	"LEAK_DETECT_MTIA_BLADE3_N","",
+	"LEAK_DETECT_MTIA_BLADE4_N","",
+	"LEAK_DETECT_MTIA_BLADE5_N","",
+	"LEAK_DETECT_MTIA_BLADE6_N","",
+	"LEAK_DETECT_MTIA_BLADE7_N","ERR_INJECT_CMM_PWR_FAIL_N",
+	"LEAK_DETECT_MTIA_BLADE8_N","",
+	/*I0 - I7*/
+	"LEAK_DETECT_MTIA_BLADE9_N","RST_I2CRST_FCB_5_N",
+	"LEAK_DETECT_MTIA_BLADE10_N","RST_I2CRST_FCB_6_N",
+	"LEAK_DETECT_MTIA_BLADE11_N","RST_I2CRST_FCB_4_N",
+	"LEAK_DETECT_MTIA_BLADE12_N","RST_I2CRST_FCB_3_N",
+	"LEAK_DETECT_MTIA_BLADE13_N","RST_I2CRST_FCB_2_N",
+	"LEAK_DETECT_MTIA_BLADE14_N","RST_I2CRST_FCB_1_N",
+	"LEAK_DETECT_MTIA_BLADE15_N","BMC_READY",
+	"LEAK_DETECT_MTIA_BLADE16_N","FM_88E6393X_BIN_UPDATE_EN_N",
+	/*J0 - J7*/
+	"LEAK_DETECT_NW_BLADE1_N","WATER_VALVE_CLOSED_N",
+	"LEAK_DETECT_NW_BLADE2_N","",
+	"LEAK_DETECT_NW_BLADE3_N","",
+	"LEAK_DETECT_NW_BLADE4_N","",
+	"LEAK_DETECT_NW_BLADE5_N","",
+	"LEAK_DETECT_NW_BLADE6_N","",
+	"PWRGD_MTIA_BLADE1_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE2_HSC_PWROK_N","",
+	/*K0 - K7*/
+	"PWRGD_MTIA_BLADE3_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE4_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE5_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE6_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE7_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE8_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE9_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE10_HSC_PWROK_N","",
+	/*L0 - L7*/
+	"PWRGD_MTIA_BLADE11_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE12_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE13_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE14_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE15_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE16_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE1_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE2_HSC_PWROK_N","",
+	/*M0 - M7*/
+	"PWRGD_NW_BLADE3_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE4_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE5_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE6_HSC_PWROK_N","",
+	"RPU_READY","",
+	"IT_GEAR_RPU_LINK_N","",
+	"IT_GEAR_LEAK","",
+	"WATER_VALVE_CLOSED_N","",
+	/*N0 - N7*/
+	"VALVE_STATUS_0","",
+	"VALVE_STATUS_1","",
+	"PCA9555_IRQ1_N","",
+	"PCA9555_IRQ2_N","",
+	"CR_TOGGLE_BOOT_N","",
+	"IRQ_FCB_1_N","",
+	"IRQ_FCB_2_N","",
+	"CMM_CABLE_CARTRIDGE_PRSNT_BOT_N","",
+	/*O0 - O7*/
+	"CMM_CABLE_CARTRIDGE_PRSNT_TOP_N","",
+	"BOT_BCB_CABLE_PRSNT_N","",
+	"TOP_BCB_CABLE_PRSNT_N","",
+	"IRQ_FCB_3_N","",
+	"IRQ_FCB_4_N","",
+	"CHASSIS_LEAK0_DETECT_N","",
+	"CHASSIS_LEAK1_DETECT_N","",
+	"PCA9555_IRQ3_N","",
+	/*P0 - P7*/
+	"PCA9555_IRQ4_N","",
+	"PCA9555_IRQ5_N","",
+	"CMM_AC_PWR_BTN_N","",
+	"RPU_READY_SPARE","",
+	"IT_GEAR_LEAK_SPARE","",
+	"IT_GEAR_RPU_LINK_SPARE_N","",
+	"IRQ_FCB_6_N","",
+	"IRQ_FCB_5_N","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts
new file mode 100644
index 000000000000..aafd1042b6e5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts
@@ -0,0 +1,1339 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Minipack 100 BMC";
+	compatible = "facebook,minipack-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default serial aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+
+		/*
+		 * i2c switch 2-0070, pca9548, 8 child channels assigned
+		 * with bus number 16-23.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * i2c switch 8-0070, pca9548, 8 child channels assigned
+		 * with bus number 24-31.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * i2c switch 9-0070, pca9548, 8 child channels assigned
+		 * with bus number 32-39.
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		/*
+		 * i2c switch 11-0070, pca9548, 8 child channels assigned
+		 * with bus number 40-47.
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * I2C Switch 24-0071 (channel #0 of 8-0070): 8 channels for
+		 * connecting to left PDB (Power Distribution Board).
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * I2C Switch 25-0072 (channel #1 of 8-0070): 8 channels for
+		 * connecting to right PDB (Power Distribution Board).
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+
+		/*
+		 * I2C Switch 26-0076 (channel #2 of 8-0070): 8 channels for
+		 * connecting to top FCM (Fan Control Module).
+		 */
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * I2C Switch 27-0076 (channel #3 of 8-0070): 8 channels for
+		 * connecting to bottom FCM (Fan Control Module).
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+
+		/*
+		 * I2C Switch 40-0073 (channel #0 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #1 (1-based).
+		 */
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * I2C Switch 41-0073 (channel #1 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #2 (1-based).
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+
+		/*
+		 * I2C Switch 42-0073 (channel #2 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #3 (1-based).
+		 */
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * I2C Switch 43-0073 (channel #3 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #4 (1-based).
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+
+		/*
+		 * I2C Switch 44-0073 (channel #4 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #5 (1-based).
+		 */
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * I2C Switch 45-0073 (channel #5 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #6 (1-based).
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+
+		/*
+		 * I2C Switch 46-0073 (channel #6 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #7 (1-based).
+		 */
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * I2C Switch 47-0073 (channel #7 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #8 (1-based).
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+		bootargs = "debug console=ttyS1,9600n8 root=/dev/ram rw";
+	};
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+/*
+ * Both firmware flashes are 64MB on Minipack BMC.
+ */
+&fmc_flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * u-boot partition: 384KB.
+		 */
+		u-boot@0 {
+			reg = <0x0 0x60000>;
+			label = "u-boot";
+		};
+
+		/*
+		 * u-boot environment variables: 128KB.
+		 */
+		u-boot-env@60000 {
+			reg = <0x60000 0x20000>;
+			label = "env";
+		};
+
+		/*
+		 * FIT image: 55.5 MB.
+		 */
+		fit@80000 {
+			reg = <0x80000 0x3780000>;
+			label = "fit";
+		};
+
+		/*
+		 * "data0" partition (8MB) is reserved for persistent
+		 * data store.
+		 */
+		data0@3800000 {
+			reg = <0x3800000 0x800000>;
+			label = "data0";
+		};
+
+		/*
+		 * "flash0" partition (covering the entire flash) is
+		 * explicitly created to avoid breaking legacy applications.
+		 */
+		flash0@0 {
+			reg = <0x0 0x4000000>;
+			label = "flash0";
+		};
+	};
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x4000000>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default
+		     &pinctrl_ncts1_default
+		     &pinctrl_ndsr1_default
+		     &pinctrl_ndtr1_default
+		     &pinctrl_nrts1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	bus-frequency = <400000>;
+	multi-master;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/*
+	 * I2C Switch 2-0070 is connecting to SCM (System Controller
+	 * Module).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	multi-master;
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		/*
+		 * I2C Switch 8-0070 channel #0: connecting to left PDB
+		 * (Power Distribution Board).
+		 */
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 8-0070 channel #1: connecting to right PDB
+		 * (Power Distribution Board).
+		 */
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 8-0070 channel #2: connecting to top FCM
+		 * (Fan Control Module).
+		 */
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 8-0070 channel #3: connecting to bottom
+		 * FCM (Fan Control Module).
+		 */
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	/*
+	 * I2C Switch 9-0070 is connecting to MAC/PHY EEPROMs on SMB
+	 * (Switch Main Board).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		/*
+		 * I2C Switch 11-0070 channel #0: connecting to PIM
+		 * (Port Interface Module) #1 (1-based).
+		 */
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #1: connecting to PIM
+		 * (Port Interface Module) #2 (1-based).
+		 */
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #2: connecting to PIM
+		 * (Port Interface Module) #3 (1-based).
+		 */
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #3: connecting to PIM
+		 * (Port Interface Module) #4 (1-based).
+		 */
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #4: connecting to PIM
+		 * (Port Interface Module) #5 (1-based).
+		 */
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #5: connecting to PIM
+		 * (Port Interface Module) #6 (1-based).
+		 */
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #6: connecting to PIM
+		 * (Port Interface Module) #7 (1-based).
+		 */
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #7: connecting to PIM
+		 * (Port Interface Module) #8 (1-based).
+		 */
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
new file mode 100644
index 000000000000..72c84f31bdf6
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
@@ -0,0 +1,982 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Santabarbara BMC";
+	compatible = "facebook,santabarbara-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c4mux0ch0;
+		i2c17 = &i2c4mux0ch1;
+		i2c18 = &i2c4mux0ch2;
+		i2c19 = &i2c4mux0ch3;
+		i2c20 = &i2c4mux0ch4;
+		i2c21 = &i2c4mux0ch5;
+		i2c22 = &i2c4mux0ch6;
+		i2c23 = &i2c4mux0ch7;
+		i2c24 = &i2c5mux0ch0;
+		i2c25 = &i2c5mux0ch1;
+		i2c26 = &i2c5mux0ch2;
+		i2c27 = &i2c5mux0ch3;
+		i2c28 = &i2c5mux1ch0;
+		i2c29 = &i2c5mux1ch1;
+		i2c30 = &i2c5mux1ch2;
+		i2c31 = &i2c5mux1ch3;
+		i2c32 = &i2c12mux0ch0;
+		i2c33 = &i2c12mux0ch1;
+		i2c34 = &i2c12mux0ch2;
+		i2c35 = &i2c12mux0ch3;
+		i2c36 = &i2c12mux0ch4;
+		i2c37 = &i2c12mux0ch5;
+		i2c38 = &i2c12mux0ch6;
+		i2c39 = &i2c12mux0ch7;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	p3v3_bmc_aux: regulator-p3v3-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_bmc_aux";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	spi_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		status = "okay";
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+	status = "okay";
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"rtc-battery-voltage-read-enable","","","BMC_READY",
+			"","led-identify","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"FM_MUX1_SEL_R","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"led-postcode-0","led-postcode-1",
+			"led-postcode-2","led-postcode-3",
+			"led-postcode-4","led-postcode-5",
+			"led-postcode-6","led-postcode-7",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"power-button","","reset-button","",
+			"led-power","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","power-host-control","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","",
+				"FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1",
+				"FM_BOARD_BMC_REV_ID2","",
+	/*18C0-18C7*/	"SPI_BMC_BIOS_ROM_IRQ0_R_N","","","","","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_R_N","","";
+};
+
+&i2c0 {
+	status = "okay";
+
+	// MB FRU
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <112 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_NIC_PPS_IN_OE_N","FM_NIC_PPS_OUT_OE_N",
+			"FM_CPU0_TRIGGERTSC_OE_N","FM_NIC_PPS_IN_MUX_OE_N",
+			"FM_CPU0_CORETYPE0","FM_CPU0_CORETYPE1",
+			"FM_CPU0_CORETYPE2","FM_NIC_PPS_OUT_MUX_OE",
+			"CLKMUX_INPUT_LOSS_U45_R_N","FM_CPU0_SP7R1",
+			"FM_CPU0_SP7R2","FM_CPU0_SP7R3",
+			"FM_CPU0_SP7R4","",
+			"FM_NIC_PPS_IN_S0_R","FM_NIC_PPS_IN_S1_R";
+	};
+
+	fan-controller@21 {
+		compatible = "maxim,max31790";
+		reg = <0x21>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <116 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_CBL_PRSNT_0A_N","FM_CBL_PRSNT_0B_N",
+			"FM_CBL_PRSNT_1A_N","FM_CBL_PRSNT_1B_N",
+			"FM_MODULE_PWRGD_0A","FM_MODULE_PWRGD_0B",
+			"CLKMUX_INPUT_LOSS_U88_R_N","FM_MODULE_PWRGD_1B",
+			"","",
+			"CLKMUX_INPUT_LOSS_U83_R_N","CLKMUX_INPUT_LOSS_U84_R_N",
+			"FM_P3V3_E1S_0_FAULT_R_N","FM_P3V3_E1S_1_FAULT_R_N",
+			"E1S_0_P12V_ADC_R_ALERT","E1S_1_P12V_ADC_R_ALERT";
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <114 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_CBL_PRSNT_2A_N","FM_CBL_PRSNT_2B_N",
+			"FM_CBL_PRSNT_3A_N","FM_CBL_PRSNT_3B_N",
+			"FM_CBL_PRSNT_4A_N","FM_CBL_PRSNT_4B_N",
+			"FM_P3V3_NIC_400G_FAULT_R_N","FM_MODULE_PWRGD_2B",
+			"OCP_SFF_P12V_ADC_R_ALERT","FM_MODULE_PWRGD_3B",
+			"FM_THERMAL_ALERT_R_N","FM_MODULE_PWRGD_4B",
+			"FM_CBL_PRSNT_OSFP_A_N","FM_CBL_PRSNT_OSFP_B_N",
+			"FM_JTAG_MCIO_MUX_S0","FM_JTAG_MCIO_MUX_S1";
+	};
+
+	gpio@26 {
+		compatible = "nxp,pca9555";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <118 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FAN_0_PRSNT_R1_N","FAN_1_PRSNT_R1_N",
+			"FAN_2_PRSNT_R1_N","FAN_3_PRSNT_R1_N",
+			"P12V_FAN_0_ADC_ALERT","P12V_FAN_1_ADC_ALERT",
+			"P12V_FAN_2_ADC_ALERT","P12V_FAN_3_ADC_ALERT",
+			"P12V_FAN0_PWRGD_R","P12V_FAN1_PWRGD_R",
+			"P12V_FAN2_PWRGD_R","P12V_FAN3_PWRGD_R",
+			"","","","";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			// HPM Board ID EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			// SCM Board ID EEPROM
+			eeprom@53 {
+				compatible = "atmel,24c128";
+				reg = <0x53>;
+			};
+		};
+		i2c4mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c4mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c4mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@42 {
+				compatible = "ti,ina230";
+				reg = <0x42>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@46 {
+				compatible = "ti,ina230";
+				reg = <0x46>;
+				shunt-resistor = <2000>;
+			};
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+				vref-supply = <&p3v3_bmc_aux>;
+			};
+
+			voltage-sensor@4a {
+				compatible = "ti,ads7830";
+				reg = <0x4a>;
+				vref-supply = <&p3v3_bmc_aux>;
+			};
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+
+			temperature-sensor@4e {
+				compatible = "ti,tmp75";
+				reg = <0x4e>;
+			};
+		};
+		i2c4mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c4mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c4mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@42 {
+				compatible = "ti,ina230";
+				reg = <0x42>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@46 {
+				compatible = "ti,ina230";
+				reg = <0x46>;
+				shunt-resistor = <2000>;
+			};
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+		};
+		i2c4mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+
+			// FIO FRU
+			eeprom@53 {
+				compatible = "atmel,24c512";
+				reg = <0x53>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	// E1S BP FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c5mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c5mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c5mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux1ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+		};
+		i2c5mux1ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+		};
+		i2c5mux1ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+				shunt-resistor = <2000>;
+			};
+		};
+		i2c5mux1ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@74 {
+				compatible = "nxp,pca9539";
+				reg = <0x74>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"P12V_E1S_ADC_ALERT","BUFF0_100M_LOSB_PLD",
+					"E1S_BP_SKU_ID0","E1S_BP_SKU_ID1",
+					"E1S_BP_SKU_ID2","E1S_BP_REV_ID0",
+					"E1S_BP_REV_ID1","E1S_BP_REV_ID2",
+					"P3V3_E1S_1_FAULT_R_N","P3V3_E1S_2_FAULT_R_N",
+					"P3V3_E1S_3_FAULT_R_N","P3V3_E1S_4_FAULT_R_N",
+					"P12V_E1S_1_FAULT_R_N","P12V_E1S_2_FAULT_R_N",
+					"P12V_E1S_3_FAULT_R_N","P12V_E1S_4_FAULT_R_N";
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	// Rainbow0 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	// Rainbow2 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	// SCM FRU
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	// BSM FRU
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	// Rainbow3 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	// OCP NIC TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	// SWB FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c12mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+		};
+		i2c12mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@42 {
+				compatible = "mps,mp2971";
+				reg = <0x42>;
+			};
+
+			power-monitor@43 {
+				compatible = "mps,mp2971";
+				reg = <0x43>;
+			};
+		};
+		i2c12mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+				shunt-resistor = <2000>;
+			};
+		};
+		i2c12mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+				shunt-resistor = <2000>;
+			};
+		};
+		i2c12mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@49 {
+				compatible = "ti,ads7830";
+				reg = <0x49>;
+			};
+		};
+		i2c12mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c12mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c12mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	// Rainbow1 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&mac2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&mac3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&sgpiom0 {
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out - in - out */
+	/*A0-A3 line 0-7*/
+	"PDB1_HSC_PWR_OK","power-chassis-control",
+	"PDB2_HSC_PWR_OK","FM_MODULE_PWRGD_0A_OUT",
+	"PWRGD_P12V_MEM","FM_MODULE_PWRGD_0B_OUT",
+	"PWRGD_P12V_SCM","FM_MODULE_PWRGD_1B_OUT",
+	/*A4-A7 line 8-15*/
+	"PWRGD_P12V_FAN","FM_MODULE_PWRGD_2B_OUT",
+	"PWRGD_P5V_AUX","FM_MODULE_PWRGD_3B_OUT",
+	"power-chassis-good","FM_MODULE_PWRGD_4B_OUT",
+	"PWRGD_P1V8_LDO","FM_CBL_PRSNT_0A_N_OUT",
+	/*B0-B3 line 16-23*/
+	"PWRGD_P1V_LDO","FM_CBL_PRSNT_0B_N_OUT",
+	"PWRGD_PVDD33_S5","FM_CBL_PRSNT_1A_N_OUT",
+	"PWRGD_PVDD18_S5_P0","FM_CBL_PRSNT_1B_N_OUT",
+	"CPU0_SLP_S5_N","FM_CBL_PRSNT_2A_N_OUT",
+	/*B4-B7 line 24-31*/
+	"PWRGD_PVDDIO_MEM_S3_P0","FM_CBL_PRSNT_2B_N_OUT",
+	"CPU0_SLP_S3_N","FM_CBL_PRSNT_3A_N_OUT",
+	"FM_MODULE_PWRGD_1B","FM_CBL_PRSNT_3B_N_OUT",
+	"FM_MODULE_PWRGD_2B","FM_CBL_PRSNT_4A_N_OUT",
+	/*C0-C3 line 32-39*/
+	"FM_MODULE_PWRGD_3B","FM_CBL_PRSNT_4B_N_OUT",
+	"FM_MODULE_PWRGD_4B","P12V_FAN0_PWRGD_OUT",
+	"FM_MODULE_PWRGD_0B","P12V_FAN1_PWRGD_OUT",
+	"PWRGD_PVDDIO_P0","P12V_FAN2_PWRGD_OUT",
+	/*C4-C7 line 40-47*/
+	"PWRGD_PVDDCR_SOC_P0","P12V_FAN3_PWRGD_OUT",
+	"PWRGD_PVDDCR_CPU0_P0","P12V_FAN4_PWRGD_OUT",
+	"PWRGD_PVDDCR_CPU1_P0","P12V_FAN5_PWRGD_OUT",
+	"FM_CPU0_PWR_GOOD","P12V_FAN6_PWRGD_OUT",
+	/*D0-D3 line 48-55*/
+	"host0-ready","P12V_FAN7_PWRGD_OUT",
+	"FM_PWRGD_CPU0_PWROK","FAN_0_PRSNT_R1_N_OUT",
+	"FM_RST_CPU0_RESETL_N","FAN_1_PRSNT_R1_N_OUT",
+	"RST_CPU0_PERST0_R_N","FAN_2_PRSNT_R1_N_OUT",
+	/*D4-D7 line 56-63*/
+	"RST_CPU0_PERST1_R_N","FAN_3_PRSNT_R1_N_OUT",
+	"BIOS_POST_CMPLT","FAN_4_PRSNT_R1_N_OUT",
+	"","FAN_5_PRSNT_R1_N_OUT",
+	"","FAN_6_PRSNT_R1_N_OUT",
+	/*E0-E3 line 64-71*/
+	"FM_PWRGD_CHAD_CPU0","FAN_7_PRSNT_R1_N_OUT",
+	"FM_PWRGD_CHEH_CPU0","TRAY_SLOT_ID0_OUT",
+	"FM_PWRGD_CHIL_CPU0","TRAY_SLOT_ID1_OUT",
+	"FM_PWRGD_CHMP_CPU0","TRAY_SLOT_ID2_OUT",
+	/*E4-E7 line 72-79*/
+	"P12V_E1S_0_PWRGD","TRAY_SLOT_ID3_OUT",
+	"P12V_E1S_1_PWRGD","TRAY_SLOT_ID4_OUT",
+	"P3V3_E1S_0_PWRGD","SCM_JTAG_MUX_S0_R",
+	"P3V3_E1S_1_PWRGD","SCM_JTAG_MUX_S1_R",
+	/*F0-F3 line 80-87*/
+	"FM_MODULE_PWRGD_0A","BMC_SGPIO_READY",
+	"OCP_V3_1_P3V3_PLD_R_PWRGD","CPU0_SYS_RESET_N",
+	"P12V_OCP_V3_1_PLD_PWRGD","RST_CPU0_KBRST_N",
+	"PWRGD_OCP_SFF_PWR_GOOD","BIOS_DEBUG_MODE",
+	/*F4-F7 line 88-95*/
+	"","CLR_CMOS",
+	"","I3C_SPD_MUX_FORCE_SEL",
+	"","FM_JTAG_HOST_SEL",
+	"","TRAY_PRESENT_N",
+	/*G0-G3 line 96-103*/
+	"MB_REV_ID_0","UART_BMC_SEL0",
+	"MB_REV_ID_1","UART_BMC_SEL1",
+	"MB_REV_ID_2","SCM_USB_SEL",
+	"MB_SKU_ID_0","FORCE_ALL_PWRON",
+	/*G4-G7 line 104-111*/
+	"MB_SKU_ID_1","PASSWORD_CLEAR",
+	"MB_SKU_ID_2","",
+	"MB_SKU_ID_3","",
+	"","BIOS_DEBUG_MODE",
+	/*H0-H3 line 112-119*/
+	"FM_IOEXP_U538_INT_N","",
+	"FM_IOEXP_U539_INT_N","",
+	"FM_IOEXP_U540_INT_N","",
+	"FM_IOEXP_U541_INT_N","",
+	/*H4-H7 line 120-127*/
+	"FM_IOEXP_PDB2_U1003_INT_N","",
+	"","","","","","",
+	/*I0-I3 line 128-135*/
+	"","","","",
+	"PDB_IRQ_PMBUS_ALERT_ISO_R_N","",
+	"PDB_UV_ALERT_ISO_R_N","",
+	/*I4-I7 line 136-143*/
+	"P12V_SCM_ADC_ALERT","",
+	"CPU0_REGS_I2C_ALERT_N","",
+	"FM_RTC_ALERT_N","",
+	"APML_CPU0_ALERT_R_N","",
+	/*J0-J3 line 144-151*/
+	"SMB_RJ45_FIO_TMP_ALERT","",
+	"FM_SMB_ALERT_MCIO_0A_N","",
+	"I3C_MCIO_0B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_1A_N","",
+	/*J4-J7 line 152-159*/
+	"I3C_MCIO_1B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_2A_N","",
+	"I3C_MCIO_2B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_3A_N","",
+	/*K0-K3 line 160-167*/
+	"I3C_MCIO_3B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_4A_N","",
+	"I3C_MCIO_4B_ALERT_ISO_R_N","",
+	"","",
+	/*K4-K7 line 168-175*/
+	"","","","","","","","",
+	/*L0-L3 line 176-183*/
+	"FM_CPU0_THERMTRIP_N","",
+	"FM_CPU0_PROCHOT_N","",
+	"FM_CPU0_SMERR_N","",
+	"FM_PVDDCR_CPU0_P0_OCP_N","",
+	/*L4-L7 line 184-191*/
+	"FM_PVDDCR_CPU1_P0_OCP_N","",
+	"FM_PVDDCR_SOC_P0_OCP_N","",
+	"FM_OCP_PWRBRK_R_N","",
+	"PMIC_ERROR_N","",
+	/*M0-M3 line 192-199*/
+	"","","","","","","","",
+	/*M4-M7 line 200-207*/
+	"","","","","","","","",
+	/*N0-N3 line 208-215*/
+	"FM_PRSNT_CPU0_N","",
+	"OCP_SFF_PRSNT_N","",
+	"E1S_0_PRSNT_R_N","",
+	"E1S_BP_0_PRSNT_R_N","",
+	/*N4-N7 line 216-223*/
+	"E1S_BP_1_PRSNT_R_N","",
+	"E1S_BP_2_PRSNT_R_N","",
+	"E1S_BP_3_PRSNT_R_N","",
+	"PDB_PRSNT_J311_N","",
+	/*O0-O3 line 224-231*/
+	"PDB_PRSNT_J312_N","",
+	"PDB_PRSNT_J313_N","",
+	"PDB_PRSNT_J314_N","",
+	"PRSNT_RJ45_FIO_N_R","",
+	/*O4-O7 line 232-239*/
+	"PRSNT_LEAK_CABLE_1_R_N","",
+	"PRSNT_LEAK_CABLE_2_R_N","",
+	"PRSNT_HDT_N","",
+	"","",
+	/*P0-P3 line 240-247*/
+	"","","","","","","","",
+	/*P4-P7 line 248-255*/
+	"","","","","","","","";
+	status = "okay";
+};
+
+// BIOS Flash
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+	status = "okay";
+
+	flash@0 {
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		status = "okay";
+	};
+};
+
+// HOST BIOS Debug
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+// BMC Debug Console
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
new file mode 100644
index 000000000000..5d4c7d979f1e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+// Author: Vijay Khemka <vijaykhemka@fb.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook TiogaPass BMC";
+	compatible = "facebook,tiogapass-bmc", "aspeed,ast2500";
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+
+		/*
+		 * Hardcode the bus number of i2c switches' channels to
+		 * avoid breaking the legacy applications.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			      <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&lpc_ctrl {
+	// Enable lpc clock
+	status = "okay";
+};
+
+&uart1 {
+	// Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	// SoL Host Console
+	status = "okay";
+};
+
+&uart3 {
+	// SoL BMC Console
+	status = "okay";
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&kcs2 {
+	// BMC KCS channel 2
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	// BMC KCS channel 3
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"BMC_CPLD_FPGA_SEL","","","","","","","",
+	/*B0-B7*/	"","BMC_DEBUG_EN","","","","BMC_PPIN","PS_PWROK",
+			"IRQ_PVDDQ_GHJ_VRHOT_LVT3",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"BIOS_MRC_DEBUG_MSG_DIS","BOARD_REV_ID0","",
+			"BOARD_REV_ID1","IRQ_DIMM_SAVE_LVT3","BOARD_REV_ID2",
+			"CPU_ERR0_LVT3_BMC","CPU_ERR1_LVT3_BMC",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON",
+			"POWER_OUT","NMI_BUTTON","","CPU0_PROCHOT_LVT3_ BMC",
+			"CPU1_PROCHOT_LVT3_ BMC",
+	/*F0-F7*/	"IRQ_PVDDQ_ABC_VRHOT_LVT3","",
+			"IRQ_PVCCIN_CPU0_VRHOT_LVC3",
+			"IRQ_PVCCIN_CPU1_VRHOT_LVC3",
+			"IRQ_PVDDQ_KLM_VRHOT_LVT3","","P3VBAT_BRIDGE_EN","",
+	/*G0-G7*/	"CPU_ERR2_LVT3","CPU_CATERR_LVT3","PCH_BMC_THERMTRIP",
+			"CPU0_SKTOCC_LVT3","","","","BIOS_SMI_ACTIVE",
+	/*H0-H7*/	"LED_POST_CODE_0","LED_POST_CODE_1","LED_POST_CODE_2",
+			"LED_POST_CODE_3","LED_POST_CODE_4","LED_POST_CODE_5",
+			"LED_POST_CODE_6","LED_POST_CODE_7",
+	/*I0-I7*/	"CPU0_FIVR_FAULT_LVT3","CPU1_FIVR_FAULT_LVT3",
+			"FORCE_ADR","UV_ADR_TRIGGER_EN","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"IRQ_UV_DETECT","IRQ_OC_DETECT","HSC_TIMER_EXP","",
+			"MEM_THERM_EVENT_PCH","PMBUS_ALERT_BUF_EN","","",
+	/*M0-M7*/	"CPU0_RC_ERROR","CPU1_RC_ERROR","","OC_DETECT_EN",
+			"CPU0_THERMTRIP_LATCH_LVT3",
+			"CPU1_THERMTRIP_LATCH_LVT3","","",
+	/*N0-N7*/	"","","","CPU_MSMI_LVT3","","BIOS_SPI_BMC_CTRL","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"BOARD_SKU_ID0","BOARD_SKU_ID1","BOARD_SKU_ID2",
+			"BOARD_SKU_ID3","BOARD_SKU_ID4","BMC_PREQ",
+			"BMC_PWR_DEBUG","RST_RSMRST",
+	/*Q0-Q7*/	"","","","","UARTSW_LSB","UARTSW_MSB",
+			"POST_CARD_PRES_BMC","PE_BMC_WAKE",
+	/*R0-R7*/	"","","BMC_TCK_MUX_SEL","BMC_PRDY",
+			"BMC_XDP_PRSNT_IN","RST_BMC_PLTRST_BUF","SLT_CFG0",
+			"SLT_CFG1",
+	/*S0-S7*/	"THROTTLE","BMC_READY","","HSC_SMBUS_SWITCH_EN","",
+			"","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","BMC_FAULT","","",
+	/*V0-V7*/	"","","","FAST_PROCHOT_EN","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","GLOBAL_RST_WARN",
+			"CPU0_MEMABC_MEMHOT_LVT3_BMC",
+			"CPU0_MEMDEF_MEMHOT_LVT3_BMC",
+			"CPU1_MEMGHJ_MEMHOT_LVT3_BMC",
+			"CPU1_MEMKLM_MEMHOT_LVT3_BMC",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","BMC_JTAG_SEL","SIO_ONCONTROL","",
+			"","","",
+	/*Z0-Z7*/	"","SIO_POWER_GOOD","IRQ_PVDDQ_DEF_VRHOT_LVT3","",
+			"","","","",
+	/*AA0-AA7*/	"CPU1_SKTOCC_LVT3","IRQ_SML1_PMBUS_ALERT",
+			"SERVER_POWER_LED","","PECI_MUX_SELECT","UV_HIGH_SET",
+			"","POST_COMPLETE",
+	/*AB0-AB7*/	"IRQ_HSC_FAULT","OCP_MEZZA_PRES","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default>;
+	use-ncsi;
+};
+
+&adc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	//Airmax Conn B, CPU0 PIROM, CPU1 PIROM
+};
+
+&i2c1 {
+	status = "okay";
+	//X24 Riser
+	i2c-mux@71 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp75@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux20: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux21: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux22: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux23: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp421@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux24: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux25: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux26: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux27: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp421@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux28: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux29: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux30: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux31: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+			};
+
+			i2c-switch@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+			};
+
+			i2c-switch@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+		};
+
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	// Mezz Management SMBus
+};
+
+&i2c3 {
+	status = "okay";
+	// SMBus to Board ID EEPROM
+};
+
+&i2c4 {
+	status = "okay";
+	// BMC Debug Header
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	// CPU Voltage regulators
+	regulator@48 {
+		compatible = "infineon,pxe1610";
+		reg = <0x48>;
+	};
+	regulator@4a {
+		compatible = "infineon,pxe1610";
+		reg = <0x4a>;
+	};
+	regulator@50 {
+		compatible = "infineon,pxe1610";
+		reg = <0x50>;
+	};
+	regulator@52 {
+		compatible = "infineon,pxe1610";
+		reg = <0x52>;
+	};
+	regulator@58 {
+		compatible = "infineon,pxe1610";
+		reg = <0x58>;
+	};
+	regulator@5a {
+		compatible = "infineon,pxe1610";
+		reg = <0x5a>;
+	};
+	regulator@68 {
+		compatible = "infineon,pxe1610";
+		reg = <0x68>;
+	};
+	regulator@70 {
+		compatible = "infineon,pxe1610";
+		reg = <0x70>;
+	};
+	regulator@72 {
+		compatible = "infineon,pxe1610";
+		reg = <0x72>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	//HSC, AirMax Conn A
+	adm1278@45 {
+		compatible = "adi,adm1275";
+		reg = <0x45>;
+		shunt-resistor-micro-ohms = <250>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	//Mezz Sensor SMBus
+};
+
+&i2c9 {
+	status = "okay";
+	//USB Debug Connector
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts
new file mode 100644
index 000000000000..97cd11c3d9a5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2400-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 100 BMC";
+	compatible = "facebook,wedge100-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&fmc {
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1@0 {
+				reg = <0x0 0x2000000>;
+				label = "flash1";
+			};
+		};
+	};
+};
+
+&i2c7 {
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge40.dts
new file mode 100644
index 000000000000..6624855d8ebd
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge40.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2400-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 40 BMC";
+	compatible = "facebook,wedge40-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+};
+
+&wdt2 {
+	status = "disabled";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		     &pinctrl_pwm1_default
+		     &pinctrl_pwm6_default
+		     &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
new file mode 100644
index 000000000000..1d46eaee8656
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 400 BMC (64MB Datastore)";
+	compatible = "facebook,wedge400-data64-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0076) provides 8 channels connecting to
+		 * FCM (Fan Controller Module).
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		spi2 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			      <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>;
+	};
+
+	/*
+	 * GPIO-based SPI Master is required to access SPI TPM, because
+	 * full-duplex SPI transactions are not supported by ASPEED SPI
+	 * Controllers.
+	 */
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+/*
+ * Both firmware flashes are 128MB on Wedge400 BMC.
+ */
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x8000000>;
+			label = "flash1";
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
+ * communication.
+ */
+&i2c0 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&sdhci1 {
+	max-frequency = <25000000>;
+	/*
+	 * DMA mode needs to be disabled to avoid conflicts with UHCI
+	 * Controller in AST2500 SoC.
+	 */
+	sdhci-caps-mask = <0x0 0x580000>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
new file mode 100644
index 000000000000..ef0cfc51cda4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+
+#include "aspeed-bmc-facebook-wedge400-data64.dts"
+
+/ {
+	model = "Facebook Wedge 400 BMC";
+	compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
+};
+
+&fmc_flash0 {
+	/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128.dtsi"
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts
new file mode 100644
index 000000000000..98fe0d6c8188
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook YAMP 100 BMC";
+	compatible = "facebook,yamp-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+	};
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&mac1 {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x2000000>;
+			label = "flash1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
new file mode 100644
index 000000000000..60b98d602e80
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -0,0 +1,1384 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemite 4 BMC";
+	compatible = "facebook,yosemite4-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		serial8 = &uart9;
+
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 1>, <&adc1 7>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			reg = <0>;
+			spi-max-frequency = <33000000>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart6 {
+	status = "okay";
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&wdt2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst2_default>;
+	aspeed,reset-type = "system";
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+	mellanox,multi-host;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+	mellanox,multi-host;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT1_UART_SEL0","SLOT1_UART_SEL1",
+				"SLOT1_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT2_UART_SEL0","SLOT2_UART_SEL1",
+				"SLOT2_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT3_UART_SEL0","SLOT3_UART_SEL1",
+				"SLOT3_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT4_UART_SEL0","SLOT4_UART_SEL1",
+				"SLOT4_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT5_UART_SEL0","SLOT5_UART_SEL1",
+				"SLOT5_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT6_UART_SEL0","SLOT6_UART_SEL1",
+				"SLOT6_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT7_UART_SEL0","SLOT7_UART_SEL1",
+				"SLOT7_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT8_UART_SEL0","SLOT8_UART_SEL1",
+				"SLOT8_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c8 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux17: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux18: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux19: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@71 {
+		compatible = "nxp,pca9544";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux20: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux21: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux22: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux23: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+	};
+};
+
+&i2c10 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@74 {
+		compatible = "nxp,pca9544";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux28: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9506";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@21 {
+				compatible = "nxp,pca9506";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@22 {
+				compatible = "nxp,pca9506";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@23 {
+				compatible = "nxp,pca9506";
+				reg = <0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@24 {
+				compatible = "nxp,pca9506";
+				reg = <0x24>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names = "","","","",
+						  "NIC0_MAIN_PWR_EN",
+						  "NIC1_MAIN_PWR_EN",
+						  "NIC2_MAIN_PWR_EN",
+						  "NIC3_MAIN_PWR_EN",
+						  "","","","","","","","",
+						  "","","","","","","","",
+						  "","","","","","","","";
+			};
+		};
+
+		imux29: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+	power-sensor@10 {
+		compatible = "adi,adm1272";
+		reg = <0x10>;
+	};
+
+	power-sensor@12 {
+		compatible = "adi,adm1272";
+		reg = <0x12>;
+	};
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "P48V_OCP_GPIO1", "P48V_OCP_GPIO2",
+				  "P48V_OCP_GPIO3", "FAN_BOARD_0_REVISION_0_R",
+				  "FAN_BOARD_0_REVISION_1_R",
+				  "FAN_BOARD_1_REVISION_0_R",
+				  "FAN_BOARD_1_REVISION_1_R", "RST_MUX_R_N",
+				  "RST_LED_CONTROL_FAN_BOARD_0_N",
+				  "RST_LED_CONTROL_FAN_BOARD_1_N",
+				  "RST_IOEXP_FAN_BOARD_0_N",
+				  "RST_IOEXP_FAN_BOARD_1_N",
+				  "PWRGD_LOAD_SWITCH_FAN_BOARD_0_R",
+				  "PWRGD_LOAD_SWITCH_FAN_BOARD_1_R",
+				  "", "";
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "HSC_OCP_SLOT_ODD_GPIO1",
+				  "HSC_OCP_SLOT_ODD_GPIO2",
+				  "HSC_OCP_SLOT_ODD_GPIO3",
+				  "HSC_OCP_SLOT_EVEN_GPIO1",
+				  "HSC_OCP_SLOT_EVEN_GPIO2",
+				  "HSC_OCP_SLOT_EVEN_GPIO3",
+				  "ADC_TYPE_0_R", "ADC_TYPE_1_R",
+				  "MEDUSA_BOARD_REV_0", "MEDUSA_BOARD_REV_1",
+				  "MEDUSA_BOARD_REV_2", "MEDUSA_BOARD_TYPE",
+				  "DELTA_MODULE_TYPE", "P12V_HSC_TYPE",
+				  "", "";
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "CARD_TYPE_SLOT1", "CARD_TYPE_SLOT2",
+				  "CARD_TYPE_SLOT3", "CARD_TYPE_SLOT4",
+				  "CARD_TYPE_SLOT5", "CARD_TYPE_SLOT6",
+				  "CARD_TYPE_SLOT7", "CARD_TYPE_SLOT8",
+				  "OC_P48V_HSC_0_N", "FLT_P48V_HSC_0_N",
+				  "OC_P48V_HSC_1_N", "FLT_P48V_HSC_1_N",
+				  "EN_P48V_AUX_0", "EN_P48V_AUX_1",
+				  "PWRGD_P12V_AUX_0", "PWRGD_P12V_AUX_1";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "HSC1_ALERT1_R_N", "HSC2_ALERT1_R_N",
+				  "HSC3_ALERT1_R_N", "HSC4_ALERT1_R_N",
+				  "HSC5_ALERT1_R_N", "HSC6_ALERT1_R_N",
+				  "HSC7_ALERT1_R_N", "HSC8_ALERT1_R_N",
+				  "HSC1_ALERT2_R_N", "HSC2_ALERT2_R_N",
+				  "HSC3_ALERT2_R_N", "HSC4_ALERT2_R_N",
+				  "HSC5_ALERT2_R_N", "HSC6_ALERT2_R_N",
+				  "HSC7_ALERT2_R_N", "HSC8_ALERT2_R_N";
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c12 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux34: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			rtc@6f {
+				compatible = "nuvoton,nct3018y";
+				reg = <0x6f>;
+			};
+
+			gpio@20 {
+				compatible = "nxp,pca9506";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@21 {
+				compatible = "nxp,pca9506";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@22 {
+				compatible = "nxp,pca9506";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@23 {
+				compatible = "nxp,pca9506";
+				reg = <0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		imux35: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	bus-frequency = <100000>;
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c14 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	adc@1d {
+		compatible = "ti,adc128d818";
+		reg = <0x1d>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	adc@36 {
+		compatible = "ti,adc128d818";
+		reg = <0x36>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	adc@37 {
+		compatible = "ti,adc128d818";
+		reg = <0x37>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+	};
+
+	power-sensor@42 {
+		compatible = "ti,ina230";
+		reg = <0x42>;
+	};
+
+	power-sensor@43 {
+		compatible = "ti,ina230";
+		reg = <0x43>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina230";
+		reg = <0x44>;
+	};
+
+	temperature-sensor@4e {
+		compatible = "ti,tmp75";
+		reg = <0x4e>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9544";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+
+		imux33: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+	};
+
+	i2c-mux@74 {
+		compatible = "nxp,pca9546";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux30: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			pwm@20 {
+				compatible = "maxim,max31790";
+				reg = <0x20>;
+			};
+
+			gpio@22 {
+				compatible = "ti,tca6424";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pwm@2f {
+				compatible = "maxim,max31790";
+				reg = <0x2f>;
+			};
+
+			adc@33 {
+				compatible = "maxim,max11615";
+				reg = <0x33>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+
+			gpio@61 {
+				compatible = "nxp,pca9552";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		imux31: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			pwm@20 {
+				compatible = "maxim,max31790";
+				reg = <0x20>;
+			};
+
+			gpio@22 {
+				compatible = "ti,tca6424";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pwm@2f {
+				compatible = "maxim,max31790";
+				reg = <0x2f>;
+			};
+
+			adc@33 {
+				compatible = "maxim,max11615";
+				reg = <0x33>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+
+			gpio@61 {
+				compatible = "nxp,pca9552";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	multi-master;
+	bus-frequency = <400000>;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9544";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux24: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux25: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux26: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux27: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&adc0 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+			&pinctrl_adc2_default &pinctrl_adc3_default
+			&pinctrl_adc4_default &pinctrl_adc5_default
+			&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+			&pinctrl_adc15_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts
new file mode 100644
index 000000000000..5143f85fbd70
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemitev2 BMC";
+	compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
+	aliases {
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	iio-hwmon {
+		// VOLATAGE SENSOR
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0> , <&adc 1> , <&adc 2> ,  <&adc 3> ,
+		<&adc 4> , <&adc 5> , <&adc 6> ,  <&adc 7> ,
+		<&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
+		<&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+&uart1 {
+	// Host1 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	// Host2 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+
+};
+
+&uart3 {
+	// Host3 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	// Host4 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&vuart {
+	// Virtual UART
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+	mellanox,multi-host;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&i2c1 {
+	//Host1 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb1@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	//Host2 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb3@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	//Host3 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb5@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c7 {
+	//Host4 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb7@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	//FRU EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	tmp421@4e {
+	//INLET TEMP
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	//OUTLET TEMP
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	//HSC
+	adm1278@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+	//MEZZ_TEMP_SENSOR
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+	// Debug Card
+	multi-master;
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	//FSC
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts
new file mode 100644
index 000000000000..839aad4ddd91
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-blueridge.dts"
+
+/ {
+	model = "Blueridge 4U";
+};
+
+&i2c3 {
+	power-supply@6a {
+		compatible = "ibm,cffps";
+		reg = <0x6a>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
new file mode 100644
index 000000000000..bc4c46235421
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
@@ -0,0 +1,1688 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-quad.dtsi"
+
+/ {
+	model = "Blueridge 2U";
+	compatible = "ibm,blueridge-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c2mux0;
+		i2c17 = &i2c2mux1;
+		i2c18 = &i2c2mux2;
+		i2c19 = &i2c2mux3;
+		i2c20 = &i2c4mux0chn0;
+		i2c21 = &i2c4mux0chn1;
+		i2c22 = &i2c4mux0chn2;
+		i2c23 = &i2c5mux0chn0;
+		i2c24 = &i2c5mux0chn1;
+		i2c25 = &i2c6mux0chn0;
+		i2c26 = &i2c6mux0chn1;
+		i2c27 = &i2c6mux0chn2;
+		i2c28 = &i2c6mux0chn3;
+		i2c29 = &i2c11mux0chn0;
+		i2c30 = &i2c11mux0chn1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: region@b3d00000 {
+			reg = <0xb3d00000 0x100000>;
+			no-map;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			reg = <0xb4000000 0x04000000>; /* 64M */
+			no-map;
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+			no-map;
+		};
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c2>;
+		idle-state = <0>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
+			    <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+
+		i2c2mux0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC Card fault LED at the back */
+		led-bmc-ingraham0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure ID LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			label = "fan0-presence";
+			linux,code = <6>;
+		};
+
+		event-fan1-presence {
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			label = "fan1-presence";
+			linux,code = <7>;
+		};
+
+		event-fan2-presence {
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			label = "fan2-presence";
+			linux,code = <8>;
+		};
+
+		event-fan3-presence {
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			label = "fan3-presence";
+			linux,code = <9>;
+		};
+
+		event-fan4-presence {
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			label = "fan4-presence";
+			linux,code = <10>;
+		};
+
+		event-fan5-presence {
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			label = "fan5-presence";
+			linux,code = <11>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"bmc-management-ready","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","",
+			"factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","",
+			"",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","",
+			"",
+	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
+			"power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	i2c3-mux-oe-n-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+		line-name = "I2C3_MUX_OE_N";
+		output-high;
+	};
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	gpio@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"DASD_BP2_PRESENT_N",
+			"DASD_BP1_PRESENT_N",
+			"DASD_BP0_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
+			"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
+			"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
+			"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
+			"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
+			"", "", "", "", "", "";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard0-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard0-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard3-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard3-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard4-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard4-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp275";
+		reg = <0x4b>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "pcieslot0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "pcieslot1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "pcieslot2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "pcieslot3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "pcieslot4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "cpu1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "cpu-vrm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "lcd-russel";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm16";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm17";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm18";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm20";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm21";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm22";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm23";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm24";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm25";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm26";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm27";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm28";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm29";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm30";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm31";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "planar";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "cpu0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "dasd-pyramid0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "dasd-pyramid1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "dasd-pyramid2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "cpu0-vrm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "rtc-battery";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "base-blyth";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "pcieslot6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "pcieslot7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "pcieslot8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "pcieslot9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "pcieslot10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "pcieslot11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "tpm-wilson";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	humidity-sensor@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	pwm@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "front-sys-id0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "front-check-log0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "front-enc-fault1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "front-sys-pwron0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca0: led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "fan0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "fan1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "fan2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "fan3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "fan4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "fan5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	lcd-controller@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	pressure-sensor@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pmic@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES",
+			"", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N",
+			"power-config-full-load", "";
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
+			"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
+			"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
+			"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
+			"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
+			"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
+			"", "", "", "";
+	};
+
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	temperature-sensor@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	temperature-sensor@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard10-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard10-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "nvme4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "nvme5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "nvme6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "nvme7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "nvme12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "nvme13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "nvme14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "nvme15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme16";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme17";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme18";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "nvme20";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "nvme21";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "nvme22";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "nvme23";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
new file mode 100644
index 000000000000..2f5d4075a64a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
@@ -0,0 +1,612 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Bonnell";
+	compatible = "ibm,bonnell-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c11mux0chn0;
+		i2c17 = &i2c11mux0chn1;
+		i2c18 = &i2c11mux0chn2;
+		i2c19 = &i2c11mux0chn3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: tcg_event_log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/	"","","","","","","","",
+		/*B0-B7*/	"","","","","","","checkstop","",
+		/*C0-C7*/	"","","","","","","","",
+		/*D0-D7*/	"","","","","","","","",
+		/*E0-E7*/	"","","","","","","","",
+		/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","","",
+		/*G0-G7*/	"fan0","fan1","","","","","","",
+		/*H0-H7*/	"","","rear-enc-id0","rear-enc-fault0","","","","",
+		/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+		/*J0-J7*/	"","","","","","","","",
+		/*K0-K7*/	"","","","","","","","",
+		/*L0-L7*/	"","","","","","","","",
+		/*M0-M7*/	"","","","","","","","",
+		/*N0-N7*/	"","","","","","","","",
+		/*O0-O7*/	"","","","usb-power","","","","",
+		/*P0-P7*/	"","","","","","","","",
+		/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+		/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+		/*S0-S7*/	"presence-ps0","presence-ps1","","","power-ffs-sync-history","","","",
+		/*T0-T7*/	"","","","","","","","",
+		/*U0-U7*/	"","","","","","","","",
+		/*V0-V7*/	"","","","","","","","",
+		/*W0-W7*/	"","","","","","","","",
+		/*X0-X7*/	"","","","","","","","",
+		/*Y0-Y7*/	"","","","","","","","",
+		/*Z0-Z7*/	"","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"",
+			"",
+			"DASD_BP_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@5a {
+		compatible = "acbel,fsg032";
+		reg = <0x5a>;
+	};
+
+	power-supply@5b {
+		compatible = "acbel,fsg032";
+		reg = <0x5b>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+		};
+
+		fan1: fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"APSS_RESET_N",
+			"",
+			"N_MODE_CPU_N",
+			"",
+			"",
+			"P10_DCM_PRESENT",
+			"";
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "BOOT_RCVRY_TWI",
+			"BOOT_RCVRY_UART",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"PE_SWITCH_RSTB_N";
+	};
+
+	tmp435@4c {
+		compatible = "ti,tmp435";
+		reg = <0x4c>;
+	};
+
+	pca9849@75 {
+		compatible = "nxp,pca9849";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c11mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c11mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme3";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme2";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power10-dual.dtsi"
+
+&cfam0_i2c10 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
+
+&cfam0_i2c11 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
+
+&cfam0_i2c12 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
+
+&cfam0_i2c13 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
new file mode 100644
index 000000000000..9f144f527f03
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
@@ -0,0 +1,4046 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Everest";
+	compatible = "ibm,everest-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c500 = &cfam4_i2c0;
+		i2c501 = &cfam4_i2c1;
+		i2c510 = &cfam4_i2c10;
+		i2c511 = &cfam4_i2c11;
+		i2c512 = &cfam4_i2c12;
+		i2c513 = &cfam4_i2c13;
+		i2c514 = &cfam4_i2c14;
+		i2c515 = &cfam4_i2c15;
+		i2c602 = &cfam5_i2c2;
+		i2c603 = &cfam5_i2c3;
+		i2c610 = &cfam5_i2c10;
+		i2c611 = &cfam5_i2c11;
+		i2c614 = &cfam5_i2c14;
+		i2c615 = &cfam5_i2c15;
+		i2c616 = &cfam5_i2c16;
+		i2c617 = &cfam5_i2c17;
+		i2c700 = &cfam6_i2c0;
+		i2c701 = &cfam6_i2c1;
+		i2c710 = &cfam6_i2c10;
+		i2c711 = &cfam6_i2c11;
+		i2c712 = &cfam6_i2c12;
+		i2c713 = &cfam6_i2c13;
+		i2c714 = &cfam6_i2c14;
+		i2c715 = &cfam6_i2c15;
+		i2c802 = &cfam7_i2c2;
+		i2c803 = &cfam7_i2c3;
+		i2c810 = &cfam7_i2c10;
+		i2c811 = &cfam7_i2c11;
+		i2c814 = &cfam7_i2c14;
+		i2c815 = &cfam7_i2c15;
+		i2c816 = &cfam7_i2c16;
+		i2c817 = &cfam7_i2c17;
+
+		i2c16 = &i2c4mux0chn0;
+		i2c17 = &i2c4mux0chn1;
+		i2c18 = &i2c4mux0chn2;
+		i2c19 = &i2c5mux0chn0;
+		i2c20 = &i2c5mux0chn1;
+		i2c21 = &i2c5mux0chn2;
+		i2c22 = &i2c5mux0chn3;
+		i2c23 = &i2c6mux0chn0;
+		i2c24 = &i2c6mux0chn1;
+		i2c25 = &i2c6mux0chn2;
+		i2c26 = &i2c6mux0chn3;
+		i2c27 = &i2c14mux0chn0;
+		i2c28 = &i2c14mux0chn1;
+		i2c29 = &i2c14mux0chn2;
+		i2c30 = &i2c14mux0chn3;
+		i2c31 = &i2c14mux1chn0;
+		i2c32 = &i2c14mux1chn1;
+		i2c33 = &i2c14mux1chn2;
+		i2c34 = &i2c14mux1chn3;
+		i2c35 = &i2c15mux0chn0;
+		i2c36 = &i2c15mux0chn1;
+		i2c37 = &i2c15mux0chn2;
+		i2c38 = &i2c15mux0chn3;
+		i2c39 = &i2c15mux1chn0;
+		i2c40 = &i2c15mux1chn1;
+		i2c41 = &i2c15mux1chn2;
+		i2c42 = &i2c15mux1chn3;
+		i2c43 = &i2c15mux2chn0;
+		i2c44 = &i2c15mux2chn1;
+		i2c45 = &i2c15mux2chn2;
+		i2c46 = &i2c15mux2chn3;
+		i2c47 = &i2c8mux0chn0;
+		i2c48 = &i2c8mux0chn1;
+
+		serial4 = &uart5;
+
+		sbefifo500 = &sbefifo500;
+		sbefifo501 = &sbefifo501;
+		sbefifo510 = &sbefifo510;
+		sbefifo511 = &sbefifo511;
+		sbefifo512 = &sbefifo512;
+		sbefifo513 = &sbefifo513;
+		sbefifo514 = &sbefifo514;
+		sbefifo515 = &sbefifo515;
+		sbefifo602 = &sbefifo602;
+		sbefifo603 = &sbefifo603;
+		sbefifo610 = &sbefifo610;
+		sbefifo611 = &sbefifo611;
+		sbefifo614 = &sbefifo614;
+		sbefifo615 = &sbefifo615;
+		sbefifo616 = &sbefifo616;
+		sbefifo617 = &sbefifo617;
+		sbefifo700 = &sbefifo700;
+		sbefifo701 = &sbefifo701;
+		sbefifo710 = &sbefifo710;
+		sbefifo711 = &sbefifo711;
+		sbefifo712 = &sbefifo712;
+		sbefifo713 = &sbefifo713;
+		sbefifo714 = &sbefifo714;
+		sbefifo715 = &sbefifo715;
+		sbefifo802 = &sbefifo802;
+		sbefifo803 = &sbefifo803;
+		sbefifo810 = &sbefifo810;
+		sbefifo811 = &sbefifo811;
+		sbefifo814 = &sbefifo814;
+		sbefifo815 = &sbefifo815;
+		sbefifo816 = &sbefifo816;
+		sbefifo817 = &sbefifo817;
+
+		scom500 = &scom500;
+		scom501 = &scom501;
+		scom510 = &scom510;
+		scom511 = &scom511;
+		scom512 = &scom512;
+		scom513 = &scom513;
+		scom514 = &scom514;
+		scom515 = &scom515;
+		scom602 = &scom602;
+		scom603 = &scom603;
+		scom610 = &scom610;
+		scom611 = &scom611;
+		scom614 = &scom614;
+		scom615 = &scom615;
+		scom616 = &scom616;
+		scom617 = &scom617;
+		scom700 = &scom700;
+		scom701 = &scom701;
+		scom710 = &scom710;
+		scom711 = &scom711;
+		scom712 = &scom712;
+		scom713 = &scom713;
+		scom714 = &scom714;
+		scom715 = &scom715;
+		scom802 = &scom802;
+		scom803 = &scom803;
+		scom810 = &scom810;
+		scom811 = &scom811;
+		scom814 = &scom814;
+		scom815 = &scom815;
+		scom816 = &scom816;
+		scom817 = &scom817;
+
+		spi50 = &cfam4_spi0;
+		spi51 = &cfam4_spi1;
+		spi52 = &cfam4_spi2;
+		spi53 = &cfam4_spi3;
+		spi60 = &cfam5_spi0;
+		spi61 = &cfam5_spi1;
+		spi62 = &cfam5_spi2;
+		spi63 = &cfam5_spi3;
+		spi70 = &cfam6_spi0;
+		spi71 = &cfam6_spi1;
+		spi72 = &cfam6_spi2;
+		spi73 = &cfam6_spi3;
+		spi80 = &cfam7_spi0;
+		spi81 = &cfam7_spi1;
+		spi82 = &cfam7_spi2;
+		spi83 = &cfam7_spi3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: tcg_event_log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>; /* 16M */
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+			linux,code = <15>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* RTC battery fault LED at the back */
+		led-rtc-battery {
+			gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		/* BMC Card fault LED at the back */
+		led-bmc {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure Identify LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+				 &pinctrl_adc10_default &pinctrl_adc11_default
+				 &pinctrl_adc12_default &pinctrl_adc13_default
+				 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"USERSPACE_RSTIND_BUFF","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
+	/*S0-S7*/	"","","","","power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/   "","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pca1: pca9552@62 {
+		compatible = "nxp,pca9552";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-ps0",
+			"presence-ps1",
+			"presence-ps2",
+			"presence-ps3",
+			"presence-pdb",
+			"presence-tpm",
+			"", "",
+			"presence-cp0",
+			"presence-cp1",
+			"presence-cp2",
+			"presence-cp3",
+			"presence-dasd",
+			"presence-lcd-op",
+			"presence-base-op",
+			"";
+	};
+
+	led-controller@63 {
+		compatible = "nxp,pca9552";
+		reg = <0x63>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-vrm-c12",
+			"presence-vrm-c13",
+			"presence-vrm-c15",
+			"presence-vrm-c16",
+			"presence-vrm-c17",
+			"presence-vrm-c18",
+			"presence-vrm-c20",
+			"presence-vrm-c21",
+			"presence-vrm-c54",
+			"presence-vrm-c55",
+			"presence-vrm-c57",
+			"presence-vrm-c58",
+			"presence-vrm-c59",
+			"presence-vrm-c60",
+			"presence-vrm-c62",
+			"presence-vrm-c63";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+
+	power-supply@6d {
+		compatible = "ibm,cffps";
+		reg = <0x6d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	pca2: pca9552@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card1",
+			"presence-cable-card2",
+			"presence-cable-card3",
+			"presence-cable-card4",
+			"presence-cable-card5",
+			"expander-cable-card1",
+			"expander-cable-card2",
+			"expander-cable-card3",
+			"expander-cable-card4",
+			"expander-cable-card5";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c01: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c01-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c01-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca_cable_card_c02: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c02-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c02-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c03: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c03-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c03-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca3: pca9552@66 {
+		compatible = "nxp,pca9552";
+		reg = <0x66>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card6",
+			"presence-cable-card7",
+			"presence-cable-card8",
+			"presence-cable-card9",
+			"presence-cable-card10",
+			"presence-cable-card11",
+			"expander-cable-card6",
+			"expander-cable-card7",
+			"expander-cable-card8",
+			"expander-cable-card9",
+			"expander-cable-card10",
+			"expander-cable-card11";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca_cable_card_c04: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c04-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c04-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c05: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c05-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c05-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c06: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c06-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c06-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			pca_cable_card_c07: pca9551@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c07-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c07-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+			};
+
+			pca_cable_card_c08: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c08-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c08-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c09: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c09-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c09-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			pca_cable_card_c10: pca9551@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c11: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c11-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c11-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+
+	pca_pcie_slot: pca9552@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@1 {
+			label = "pcieslot-c01";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "pcieslot-c02";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcieslot-c03";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcieslot-c04";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcieslot-c05";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcieslot-c06";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcieslot-c07";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcieslot-c08";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcieslot-c09";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcieslot-c10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcieslot-c11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	pic0_dimm: pca9552@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm8";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm9";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic1_dimm: pca9552@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm24";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm25";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm26";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm27";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm28";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm29";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm30";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm31";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic2_dimm: pca9552@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm32";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm33";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm34";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm35";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm36";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm37";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm38";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm39";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm40";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm41";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm42";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm43";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm44";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm45";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm46";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm47";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic3_dimm: pca9552@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm48";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm49";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm50";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm51";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm52";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm53";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm54";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm55";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm56";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm57";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm58";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm59";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm60";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm61";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm62";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm63";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic0_vrm_misc: pca9552@34 {
+		compatible = "ibm,pca9552";
+		reg = <0x34>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "planar";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "tpm";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "cpu3-c61";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "cpu0-c14";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "opencapi-connector3";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "opencapi-connector4";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "opencapi-connector5";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "vrm4";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "vrm5";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "vrm6";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "vrm7";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "vrm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "vrm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "vrm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "vrm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic1_vrm_misc: pca9552@35 {
+		compatible = "ibm,pca9552";
+		reg = <0x35>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "dasd-backplane";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "power-distribution";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "cpu1-c19";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "cpu2-c56";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "opencapi-connector0";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "opencapi-connector1";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "opencapi-connector2";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "vrm0";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "vrm1";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "vrm2";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "vrm3";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "vrm8";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "vrm9";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "vrm10";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "vrm11";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	ucd90320@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c8mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c14 {
+	multi-master;
+	status = "okay";
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		idle-state = <1>;
+
+		i2c14mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@51 {
+				compatible = "atmel,24c32";
+				reg = <0x51>;
+			};
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			pca_oppanel: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "front-sys-id0";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "front-check-log0";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "front-enc-fault1";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "front-sys-pwron0";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			max31785@52 {
+				compatible = "maxim,max31785a";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x52>;
+
+				fan@0 {
+					compatible = "pmbus-fan";
+					reg = <0>;
+					tach-pulses = <2>;
+				};
+
+				fan@1 {
+					compatible = "pmbus-fan";
+					reg = <1>;
+					tach-pulses = <2>;
+				};
+
+				fan@2 {
+					compatible = "pmbus-fan";
+					reg = <2>;
+					tach-pulses = <2>;
+				};
+
+				fan@3 {
+					compatible = "pmbus-fan";
+					reg = <3>;
+					tach-pulses = <2>;
+				};
+			};
+
+			pca_fan_nvme: pca9552@60 {
+				compatible = "nxp,pca9552";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "nvme0";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "nvme1";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "nvme2";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "nvme3";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@4 {
+					label = "nvme4";
+					reg = <4>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@5 {
+					label = "nvme5";
+					reg = <5>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@6 {
+					label = "nvme6";
+					reg = <6>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@7 {
+					label = "nvme7";
+					reg = <7>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@8 {
+					label = "nvme8";
+					reg = <8>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@9 {
+					label = "nvme9";
+					reg = <9>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@10 {
+					label = "fan0";
+					reg = <10>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@11 {
+					label = "fan1";
+					reg = <11>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@12 {
+					label = "fan2";
+					reg = <12>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@13 {
+					label = "fan3";
+					reg = <13>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			pca0: pca9552@61 {
+				compatible = "nxp,pca9552";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x61>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				gpio-line-names =
+					"","","","",
+					"","","","",
+					"","","","",
+					"presence-fan3",
+					"presence-fan2",
+					"presence-fan1",
+					"presence-fan0";
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c14mux1chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux1chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux2chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c15mux2chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <210>, <228>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power10-quad.dtsi"
+
+&fsi_hub0 {
+	cfam@4,0 { /* DCM2_C0 */
+		reg = <4 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <4>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OM01 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom500: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo500: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OM23 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom501: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo501: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom510: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo510: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom511: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo511: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom512: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo512: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom513: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo513: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom514: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo514: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom515: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo515: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ4: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub4: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@5,0 { /* DCM2_C1 */
+		reg = <5 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <5>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OM45 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom602: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo602: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OM67 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom603: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo603: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom610: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo610: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom611: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo611: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom614: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo614: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom615: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo615: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom616: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo616: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom617: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo617: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ5: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub5: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@6,0 { /* DCM3_C0 */
+		reg = <6 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <6>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OM01 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom700: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo700: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OM23 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom701: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo701: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom710: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo710: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom711: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo711: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom712: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo712: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom713: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo713: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom714: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo714: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom715: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo715: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ6: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub6: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@7,0 { /* DCM3_C1 */
+		reg = <7 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <7>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OM45 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom802: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo802: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OM67 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom803: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo803: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom810: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo810: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom811: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo811: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom814: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo814: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom815: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo815: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom816: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo816: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom817: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo817: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ7: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub7: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ4 {
+	reg = <5>;
+};
+
+&fsi_occ5 {
+	reg = <6>;
+};
+
+&fsi_occ6 {
+	reg = <7>;
+};
+
+&fsi_occ7 {
+	reg = <8>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
new file mode 100644
index 000000000000..9a43fc7bcebe
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
@@ -0,0 +1,3903 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-quad.dtsi"
+
+/ {
+	model = "Fuji";
+	compatible = "ibm,fuji-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c500 = &cfam4_i2c0;
+		i2c501 = &cfam4_i2c1;
+		i2c510 = &cfam4_i2c10;
+		i2c511 = &cfam4_i2c11;
+		i2c512 = &cfam4_i2c12;
+		i2c513 = &cfam4_i2c13;
+		i2c514 = &cfam4_i2c14;
+		i2c515 = &cfam4_i2c15;
+		i2c602 = &cfam5_i2c2;
+		i2c603 = &cfam5_i2c3;
+		i2c610 = &cfam5_i2c10;
+		i2c611 = &cfam5_i2c11;
+		i2c614 = &cfam5_i2c14;
+		i2c615 = &cfam5_i2c15;
+		i2c616 = &cfam5_i2c16;
+		i2c617 = &cfam5_i2c17;
+		i2c700 = &cfam6_i2c0;
+		i2c701 = &cfam6_i2c1;
+		i2c710 = &cfam6_i2c10;
+		i2c711 = &cfam6_i2c11;
+		i2c712 = &cfam6_i2c12;
+		i2c713 = &cfam6_i2c13;
+		i2c714 = &cfam6_i2c14;
+		i2c715 = &cfam6_i2c15;
+		i2c802 = &cfam7_i2c2;
+		i2c803 = &cfam7_i2c3;
+		i2c810 = &cfam7_i2c10;
+		i2c811 = &cfam7_i2c11;
+		i2c814 = &cfam7_i2c14;
+		i2c815 = &cfam7_i2c15;
+		i2c816 = &cfam7_i2c16;
+		i2c817 = &cfam7_i2c17;
+
+		i2c16 = &i2c4mux0chn0;
+		i2c17 = &i2c4mux0chn1;
+		i2c18 = &i2c4mux0chn2;
+		i2c19 = &i2c5mux0chn0;
+		i2c20 = &i2c5mux0chn1;
+		i2c21 = &i2c5mux0chn2;
+		i2c22 = &i2c5mux0chn3;
+		i2c23 = &i2c6mux0chn0;
+		i2c24 = &i2c6mux0chn1;
+		i2c25 = &i2c6mux0chn2;
+		i2c26 = &i2c6mux0chn3;
+		i2c27 = &i2c14mux0chn0;
+		i2c28 = &i2c14mux0chn1;
+		i2c29 = &i2c14mux0chn2;
+		i2c30 = &i2c14mux0chn3;
+		i2c31 = &i2c14mux1chn0;
+		i2c32 = &i2c14mux1chn1;
+		i2c33 = &i2c14mux1chn2;
+		i2c34 = &i2c14mux1chn3;
+		i2c35 = &i2c15mux0chn0;
+		i2c36 = &i2c15mux0chn1;
+		i2c37 = &i2c15mux0chn2;
+		i2c38 = &i2c15mux0chn3;
+		i2c39 = &i2c15mux1chn0;
+		i2c40 = &i2c15mux1chn1;
+		i2c41 = &i2c15mux1chn2;
+		i2c42 = &i2c15mux1chn3;
+		i2c43 = &i2c15mux2chn0;
+		i2c44 = &i2c15mux2chn1;
+		i2c45 = &i2c15mux2chn2;
+		i2c46 = &i2c15mux2chn3;
+		i2c47 = &i2c8mux0chn0;
+		i2c48 = &i2c8mux0chn1;
+
+		serial4 = &uart5;
+
+		sbefifo500 = &sbefifo500;
+		sbefifo501 = &sbefifo501;
+		sbefifo510 = &sbefifo510;
+		sbefifo511 = &sbefifo511;
+		sbefifo512 = &sbefifo512;
+		sbefifo513 = &sbefifo513;
+		sbefifo514 = &sbefifo514;
+		sbefifo515 = &sbefifo515;
+		sbefifo602 = &sbefifo602;
+		sbefifo603 = &sbefifo603;
+		sbefifo610 = &sbefifo610;
+		sbefifo611 = &sbefifo611;
+		sbefifo614 = &sbefifo614;
+		sbefifo615 = &sbefifo615;
+		sbefifo616 = &sbefifo616;
+		sbefifo617 = &sbefifo617;
+		sbefifo700 = &sbefifo700;
+		sbefifo701 = &sbefifo701;
+		sbefifo710 = &sbefifo710;
+		sbefifo711 = &sbefifo711;
+		sbefifo712 = &sbefifo712;
+		sbefifo713 = &sbefifo713;
+		sbefifo714 = &sbefifo714;
+		sbefifo715 = &sbefifo715;
+		sbefifo802 = &sbefifo802;
+		sbefifo803 = &sbefifo803;
+		sbefifo810 = &sbefifo810;
+		sbefifo811 = &sbefifo811;
+		sbefifo814 = &sbefifo814;
+		sbefifo815 = &sbefifo815;
+		sbefifo816 = &sbefifo816;
+		sbefifo817 = &sbefifo817;
+
+		scom500 = &scom500;
+		scom501 = &scom501;
+		scom510 = &scom510;
+		scom511 = &scom511;
+		scom512 = &scom512;
+		scom513 = &scom513;
+		scom514 = &scom514;
+		scom515 = &scom515;
+		scom602 = &scom602;
+		scom603 = &scom603;
+		scom610 = &scom610;
+		scom611 = &scom611;
+		scom614 = &scom614;
+		scom615 = &scom615;
+		scom616 = &scom616;
+		scom617 = &scom617;
+		scom700 = &scom700;
+		scom701 = &scom701;
+		scom710 = &scom710;
+		scom711 = &scom711;
+		scom712 = &scom712;
+		scom713 = &scom713;
+		scom714 = &scom714;
+		scom715 = &scom715;
+		scom802 = &scom802;
+		scom803 = &scom803;
+		scom810 = &scom810;
+		scom811 = &scom811;
+		scom814 = &scom814;
+		scom815 = &scom815;
+		scom816 = &scom816;
+		scom817 = &scom817;
+
+		spi50 = &cfam4_spi0;
+		spi51 = &cfam4_spi1;
+		spi52 = &cfam4_spi2;
+		spi53 = &cfam4_spi3;
+		spi60 = &cfam5_spi0;
+		spi61 = &cfam5_spi1;
+		spi62 = &cfam5_spi2;
+		spi63 = &cfam5_spi3;
+		spi70 = &cfam6_spi0;
+		spi71 = &cfam6_spi1;
+		spi72 = &cfam6_spi2;
+		spi73 = &cfam6_spi3;
+		spi80 = &cfam7_spi0;
+		spi81 = &cfam7_spi1;
+		spi82 = &cfam7_spi2;
+		spi83 = &cfam7_spi3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: region@b3d00000 {
+			reg = <0xb3d00000 0x100000>;
+			no-map;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			reg = <0xb4000000 0x04000000>; /* 64M */
+			no-map;
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>; /* 16M */
+			no-map;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+			label = "fan0-presence";
+			linux,code = <15>;
+		};
+
+		event-fan1-presence {
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+			label = "fan1-presence";
+			linux,code = <14>;
+		};
+
+		event-fan2-presence {
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			label = "fan2-presence";
+			linux,code = <13>;
+		};
+
+		event-fan3-presence {
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			label = "fan3-presence";
+			linux,code = <12>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* RTC battery fault LED at the back */
+		led-rtc-battery {
+			gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		/* BMC Card fault LED at the back */
+		led-bmc {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure Identify LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+				 &pinctrl_adc10_default &pinctrl_adc11_default
+				 &pinctrl_adc12_default &pinctrl_adc13_default
+				 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"bmc-management-ready","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","",
+			"factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","",
+			"","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","",
+			"I2C_FLASH_MICRO_N","","",
+	/*S0-S7*/	"","","","","power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	led-controller@62 {
+		compatible = "nxp,pca9552";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-ps0",
+			"presence-ps1",
+			"presence-ps2",
+			"presence-ps3",
+			"presence-pdb",
+			"presence-tpm",
+			"", "",
+			"presence-cp0",
+			"presence-cp1",
+			"presence-cp2",
+			"presence-cp3",
+			"presence-dasd",
+			"presence-lcd-op",
+			"presence-base-op",
+			"";
+	};
+
+	led-controller@63 {
+		compatible = "nxp,pca9552";
+		reg = <0x63>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-vrm-c12",
+			"presence-vrm-c13",
+			"presence-vrm-c15",
+			"presence-vrm-c16",
+			"presence-vrm-c17",
+			"presence-vrm-c18",
+			"presence-vrm-c20",
+			"presence-vrm-c21",
+			"presence-vrm-c54",
+			"presence-vrm-c55",
+			"presence-vrm-c57",
+			"presence-vrm-c58",
+			"presence-vrm-c59",
+			"presence-vrm-c60",
+			"presence-vrm-c62",
+			"presence-vrm-c63";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+
+	power-supply@6d {
+		compatible = "ibm,cffps";
+		reg = <0x6d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	led-controller@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card1",
+			"presence-cable-card2",
+			"presence-cable-card3",
+			"presence-cable-card4",
+			"presence-cable-card5",
+			"expander-cable-card1",
+			"expander-cable-card2",
+			"expander-cable-card3",
+			"expander-cable-card4",
+			"expander-cable-card5";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			led-controller@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c01-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c01-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c02-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c02-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c03-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c03-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	led-controller@66 {
+		compatible = "nxp,pca9552";
+		reg = <0x66>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card6",
+			"presence-cable-card7",
+			"presence-cable-card8",
+			"presence-cable-card9",
+			"presence-cable-card10",
+			"presence-cable-card11",
+			"expander-cable-card6",
+			"expander-cable-card7",
+			"expander-cable-card8",
+			"expander-cable-card9",
+			"expander-cable-card10",
+			"expander-cable-card11";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c04-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c04-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c05-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c05-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			led-controller@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c06-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c06-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			led-controller@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c07-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c07-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c08-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c08-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			led-controller@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c09-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c09-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			led-controller@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c10-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c10-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c11-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c11-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+
+	led-controller@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "pcieslot-c01";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "pcieslot-c02";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "pcieslot-c03";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "pcieslot-c04";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "pcieslot-c05";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "pcieslot-c06";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "pcieslot-c07";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "pcieslot-c08";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "pcieslot-c09";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "pcieslot-c10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "pcieslot-c11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	led-controller@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm16";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm17";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm18";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm20";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm21";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm22";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm23";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm24";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm25";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm26";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm27";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm28";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm29";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm30";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm31";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm32";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm33";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm34";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm35";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm36";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm37";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm38";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm39";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm40";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm41";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm42";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm43";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm44";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm45";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm46";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm47";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm48";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm49";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm50";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm51";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm52";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm53";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm54";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm55";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm56";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm57";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm58";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm59";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm60";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm61";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm62";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm63";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@34 {
+		compatible = "ibm,pca9552";
+		reg = <0x34>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "planar";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "tpm";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "cpu3-c61";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "cpu0-c14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "opencapi-connector3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "opencapi-connector4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "opencapi-connector5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "vrm4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "vrm5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "vrm6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "vrm7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "vrm12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "vrm13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "vrm14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "vrm15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@35 {
+		compatible = "ibm,pca9552";
+		reg = <0x35>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "dasd-backplane";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "power-distribution";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "cpu1-c19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "cpu2-c56";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "opencapi-connector0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "opencapi-connector1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "opencapi-connector2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "vrm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "vrm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "vrm2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "vrm3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "vrm8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "vrm9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "vrm10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "vrm11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pmic@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+		reset-gpio = <&gpio0 ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+
+		i2c8mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c14 {
+	multi-master;
+	status = "okay";
+
+	lcd-controller@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		idle-state = <1>;
+
+		i2c14mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c32";
+				reg = <0x51>;
+			};
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "front-sys-id0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "front-check-log0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					reg = <2>;
+					default-state = "keep";
+					label = "front-enc-fault1";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					reg = <3>;
+					default-state = "keep";
+					label = "front-sys-pwron0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pwm@52 {
+				compatible = "maxim,max31785a";
+				reg = <0x52>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9552";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "nvme0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "nvme1";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					reg = <2>;
+					default-state = "keep";
+					label = "nvme2";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					reg = <3>;
+					default-state = "keep";
+					label = "nvme3";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@4 {
+					reg = <4>;
+					default-state = "keep";
+					label = "nvme4";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@5 {
+					reg = <5>;
+					default-state = "keep";
+					label = "nvme5";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@6 {
+					reg = <6>;
+					default-state = "keep";
+					label = "nvme6";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@7 {
+					reg = <7>;
+					default-state = "keep";
+					label = "nvme7";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@8 {
+					reg = <8>;
+					default-state = "keep";
+					label = "nvme8";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@9 {
+					reg = <9>;
+					default-state = "keep";
+					label = "nvme9";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@a {
+					reg = <10>;
+					default-state = "keep";
+					label = "fan0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@b {
+					reg = <11>;
+					default-state = "keep";
+					label = "fan1";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@c {
+					reg = <12>;
+					default-state = "keep";
+					label = "fan2";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@d {
+					reg = <13>;
+					default-state = "keep";
+					label = "fan3";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			pca0: led-controller@61 {
+				compatible = "nxp,pca9552";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x61>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				gpio-line-names =
+					"","","","",
+					"","","","",
+					"","","","",
+					"presence-fan3",
+					"presence-fan2",
+					"presence-fan1",
+					"presence-fan0";
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c14mux1chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux1chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux2chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c15mux2chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <210>, <228>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&fsi_hub0 {
+	cfam@4,0 { /* DCM2_C0 */
+		reg = <4 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <4>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom500: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo500: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom501: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo501: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom510: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo510: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom511: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo511: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom512: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo512: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom513: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo513: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom514: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo514: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom515: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo515: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam4_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam4_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam4_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@5,0 { /* DCM2_C1 */
+		reg = <5 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <5>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom602: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo602: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom603: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo603: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom610: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo610: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom611: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo611: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom614: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo614: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom615: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo615: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom616: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo616: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom617: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo617: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam5_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam5_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam5_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@6,0 { /* DCM3_C0 */
+		reg = <6 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <6>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom700: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo700: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom701: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo701: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom710: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo710: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom711: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo711: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom712: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo712: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom713: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo713: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom714: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo714: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom715: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo715: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam6_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam6_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam6_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@7,0 { /* DCM3_C1 */
+		reg = <7 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <7>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom802: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo802: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom803: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo803: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom810: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo810: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom811: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo811: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom814: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo814: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom815: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo815: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom816: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo816: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom817: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo817: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam7_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam7_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam7_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dts
new file mode 100644
index 000000000000..f5f5b18c113a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-rainier-4u.dts"
+
+/ {
+	model = "Rainier 1S4U";
+};
+
+&max {
+	/delete-node/ fan3;
+	/delete-node/ fan5;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dts
new file mode 100644
index 000000000000..342546a3c0f5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-rainier.dts"
+
+/ {
+	model = "Rainier 4U";
+};
+
+&i2c3 {
+	power-supply@6a {
+		compatible = "ibm,cffps";
+		reg = <0x6a>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
new file mode 100644
index 000000000000..c5fb5d410001
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
@@ -0,0 +1,1737 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Rainier 2U";
+	compatible = "ibm,rainier-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c2mux0;
+		i2c17 = &i2c2mux1;
+		i2c18 = &i2c2mux2;
+		i2c19 = &i2c2mux3;
+		i2c20 = &i2c4mux0chn0;
+		i2c21 = &i2c4mux0chn1;
+		i2c22 = &i2c4mux0chn2;
+		i2c23 = &i2c5mux0chn0;
+		i2c24 = &i2c5mux0chn1;
+		i2c25 = &i2c6mux0chn0;
+		i2c26 = &i2c6mux0chn1;
+		i2c27 = &i2c6mux0chn2;
+		i2c28 = &i2c6mux0chn3;
+		i2c29 = &i2c11mux0chn0;
+		i2c30 = &i2c11mux0chn1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	i2c2mux: i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		i2c-parent = <&i2c2>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
+			    <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+
+		i2c2mux0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c2mux1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c2mux2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c2mux3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC Card fault LED at the back */
+		led-bmc-ingraham0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure ID LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
+	"power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	i2c3-mux-oe-n-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "I2C3_MUX_OE_N";
+	};
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca_pres1: tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"DASD_BP2_PRESENT_N",
+			"DASD_BP1_PRESENT_N",
+			"DASD_BP0_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	pca_pres1: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
+			"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
+			"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
+			"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
+			"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
+			"", "", "", "", "", "";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard0-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard0-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard3-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard3-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard4-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard4-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	tmp275@4b {
+		compatible = "ti,tmp275";
+		reg = <0x4b>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	pca9552@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "pcieslot0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "pcieslot1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "pcieslot2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcieslot3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcieslot4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "cpu1";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "cpu-vrm1";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "lcd-russel";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm8";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm9";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm24";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm25";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm26";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm27";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm28";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm29";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm30";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm31";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "planar";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "cpu0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "dasd-pyramid0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "dasd-pyramid1";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "dasd-pyramid2";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "cpu0-vrm0";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "rtc-battery";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "base-blyth";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcieslot6";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcieslot7";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcieslot8";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "pcieslot9";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "pcieslot10";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pcieslot11";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "tpm-wilson";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	max: max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+		};
+
+		fan1: fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+		};
+
+		fan2: fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+		};
+
+		fan3: fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+		};
+
+		fan4: fan@4 {
+			compatible = "pmbus-fan";
+			reg = <4>;
+			tach-pulses = <2>;
+		};
+
+		fan5: fan@5 {
+			compatible = "pmbus-fan";
+			reg = <5>;
+			tach-pulses = <2>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca0: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "fan0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "fan1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "fan2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "fan3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "fan4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "fan5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	ucd90320@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pca_pres3: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES",
+			"", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N",
+			"power-config-full-load", "";
+	};
+
+	pca_pres2: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
+			"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
+			"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
+			"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
+			"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
+			"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
+			"", "", "", "";
+	};
+
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme8";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme9";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme10";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme11";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme12";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme13";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme14";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme15";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power10-quad.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
new file mode 100644
index 000000000000..dbadba8eb698
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
@@ -0,0 +1,6086 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/i2c/i2c.h>
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "IBM SBP1";
+	compatible = "ibm,sbp1-bmc", "aspeed,ast2600";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "LED_BMC_READY";
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			retain-state-suspended;
+			panic-indicator;
+		};
+
+		led-id-tpm {
+			label = "LED_ID_TPM";
+			gpios = <&smb_pex_vr_ctrl 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-bat {
+			label = "LED_ID_BAT";
+			gpios = <&smb_pex_vr_ctrl 16 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-mgmt-port2 {
+			label = "LED_ID_MGMT_PORT2";
+			gpios = <&smb_pex_vr_ctrl 17 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-mgmt-port1 {
+			label = "LED_ID_MGMT_PORT1";
+			gpios = <&smb_pex_vr_ctrl 18 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic1-port1 {
+			label = "LED_ID_NIC1_PORT1";
+			gpios = <&smb_pex_vr_ctrl 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic1-port2 {
+			label = "LED_ID_NIC1_PORT2";
+			gpios = <&smb_pex_vr_ctrl 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic2-port1 {
+			label = "LED_ID_NIC2_PORT1";
+			gpios = <&smb_pex_vr_ctrl 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic2-port2 {
+			label = "LED_ID_NIC2_PORT2";
+			gpios = <&smb_pex_vr_ctrl 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-m2-ssd2 {
+			label = "LED_ID_M2_SSD2";
+			gpios = <&smb_pex_vr_ctrl 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-m2-ssd1 {
+			label = "LED_ID_M2_SSD1";
+			gpios = <&smb_pex_vr_ctrl 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dwr-frnt-p {
+			label = "LED_ID_DWR_FRNT_P";
+			gpios = <&smb_svc_pex_cpu3_led 37 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+
+			default-state = "on";
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-pwr-dwr-frnt {
+			label = "LED_PWR_DWR_FRNT";
+			gpios = <&smb_svc_pex_cpu3_led 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-pwr-dwr-back {
+			label = "LED_PWR_DWR_BACK";
+			gpios = <&smb_pex_vr_ctrl 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-id-dwr-back-p {
+			label = "LED_ID_DWR_BACK_P";
+			gpios = <&smb_pex_vr_ctrl 35 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+
+			default-state = "on";
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-id-cpu0 {
+			label = "LED_ID_CPU0";
+			gpios = <&smb_svc_pex_cpu0_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu1 {
+			label = "LED_ID_CPU1";
+			gpios = <&smb_svc_pex_cpu1_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu2 {
+			label = "LED_ID_CPU2";
+			gpios = <&smb_svc_pex_cpu2_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu3 {
+			label = "LED_ID_CPU3";
+			gpios = <&smb_svc_pex_cpu3_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0e2 {
+			label = "LED_ID_DIMM_C0E2";
+			gpios = <&smb_svc_pex_cpu0_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0e1 {
+			label = "LED_ID_DIMM_C0E1";
+			gpios = <&smb_svc_pex_cpu0_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0f2 {
+			label = "LED_ID_DIMM_C0F2";
+			gpios = <&smb_svc_pex_cpu0_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0f1 {
+			label = "LED_ID_DIMM_C0F1";
+			gpios = <&smb_svc_pex_cpu0_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0g2 {
+			label = "LED_ID_DIMM_C0G2";
+			gpios = <&smb_svc_pex_cpu0_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0g1 {
+			label = "LED_ID_DIMM_C0G1";
+			gpios = <&smb_svc_pex_cpu0_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0h2 {
+			label = "LED_ID_DIMM_C0H2";
+			gpios = <&smb_svc_pex_cpu0_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0h1 {
+			label = "LED_ID_DIMM_C0H1";
+			gpios = <&smb_svc_pex_cpu0_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0a2 {
+			label = "LED_ID_DIMM_C0A2";
+			gpios = <&smb_svc_pex_cpu0_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0a1 {
+			label = "LED_ID_DIMM_C0A1";
+			gpios = <&smb_svc_pex_cpu0_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0b2 {
+			label = "LED_ID_DIMM_C0B2";
+			gpios = <&smb_svc_pex_cpu0_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0b1 {
+			label = "LED_ID_DIMM_C0B1";
+			gpios = <&smb_svc_pex_cpu0_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0c2 {
+			label = "LED_ID_DIMM_C0C2";
+			gpios = <&smb_svc_pex_cpu0_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0c1 {
+			label = "LED_ID_DIMM_C0C1";
+			gpios = <&smb_svc_pex_cpu0_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0d2 {
+			label = "LED_ID_DIMM_C0D2";
+			gpios = <&smb_svc_pex_cpu0_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0d1 {
+			label = "LED_ID_DIMM_C0D1";
+			gpios = <&smb_svc_pex_cpu0_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1e2 {
+			label = "LED_ID_DIMM_C1E2";
+			gpios = <&smb_svc_pex_cpu1_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1e1 {
+			label = "LED_ID_DIMM_C1E1";
+			gpios = <&smb_svc_pex_cpu1_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1f2 {
+			label = "LED_ID_DIMM_C1F2";
+			gpios = <&smb_svc_pex_cpu1_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1f1 {
+			label = "LED_ID_DIMM_C1F1";
+			gpios = <&smb_svc_pex_cpu1_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1g2 {
+			label = "LED_ID_DIMM_C1G2";
+			gpios = <&smb_svc_pex_cpu1_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1g1 {
+			label = "LED_ID_DIMM_C1G1";
+			gpios = <&smb_svc_pex_cpu1_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1h2 {
+			label = "LED_ID_DIMM_C1H2";
+			gpios = <&smb_svc_pex_cpu1_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1h1 {
+			label = "LED_ID_DIMM_C1H1";
+			gpios = <&smb_svc_pex_cpu1_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1a2 {
+			label = "LED_ID_DIMM_C1A2";
+			gpios = <&smb_svc_pex_cpu1_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1a1 {
+			label = "LED_ID_DIMM_C1A1";
+			gpios = <&smb_svc_pex_cpu1_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1b2 {
+			label = "LED_ID_DIMM_C1B2";
+			gpios = <&smb_svc_pex_cpu1_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1b1 {
+			label = "LED_ID_DIMM_C1B1";
+			gpios = <&smb_svc_pex_cpu1_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1c2 {
+			label = "LED_ID_DIMM_C1C2";
+			gpios = <&smb_svc_pex_cpu1_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1c1 {
+			label = "LED_ID_DIMM_C1C1";
+			gpios = <&smb_svc_pex_cpu1_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1d2 {
+			label = "LED_ID_DIMM_C1D2";
+			gpios = <&smb_svc_pex_cpu1_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1d1 {
+			label = "LED_ID_DIMM_C1D1";
+			gpios = <&smb_svc_pex_cpu1_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2e2 {
+			label = "LED_ID_DIMM_C2E2";
+			gpios = <&smb_svc_pex_cpu2_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2e1 {
+			label = "LED_ID_DIMM_C2E1";
+			gpios = <&smb_svc_pex_cpu2_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2f2 {
+			label = "LED_ID_DIMM_C2F2";
+			gpios = <&smb_svc_pex_cpu2_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2f1 {
+			label = "LED_ID_DIMM_C2F1";
+			gpios = <&smb_svc_pex_cpu2_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2g2 {
+			label = "LED_ID_DIMM_C2G2";
+			gpios = <&smb_svc_pex_cpu2_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2g1 {
+			label = "LED_ID_DIMM_C2G1";
+			gpios = <&smb_svc_pex_cpu2_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2h2 {
+			label = "LED_ID_DIMM_C2H2";
+			gpios = <&smb_svc_pex_cpu2_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2h1 {
+			label = "LED_ID_DIMM_C2H1";
+			gpios = <&smb_svc_pex_cpu2_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2a2 {
+			label = "LED_ID_DIMM_C2A2";
+			gpios = <&smb_svc_pex_cpu2_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2a1 {
+			label = "LED_ID_DIMM_C2A1";
+			gpios = <&smb_svc_pex_cpu2_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2b2 {
+			label = "LED_ID_DIMM_C2B2";
+			gpios = <&smb_svc_pex_cpu2_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2b1 {
+			label = "LED_ID_DIMM_C2B1";
+			gpios = <&smb_svc_pex_cpu2_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2c2 {
+			label = "LED_ID_DIMM_C2C2";
+			gpios = <&smb_svc_pex_cpu2_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2c1 {
+			label = "LED_ID_DIMM_C2C1";
+			gpios = <&smb_svc_pex_cpu2_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2d2 {
+			label = "LED_ID_DIMM_C2D2";
+			gpios = <&smb_svc_pex_cpu2_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2d1 {
+			label = "LED_ID_DIMM_C2D1";
+			gpios = <&smb_svc_pex_cpu2_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3e2 {
+			label = "LED_ID_DIMM_C3E2";
+			gpios = <&smb_svc_pex_cpu3_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3e1 {
+			label = "LED_ID_DIMM_C3E1";
+			gpios = <&smb_svc_pex_cpu3_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3f2 {
+			label = "LED_ID_DIMM_C3F2";
+			gpios = <&smb_svc_pex_cpu3_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3f1 {
+			label = "LED_ID_DIMM_C3F1";
+			gpios = <&smb_svc_pex_cpu3_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3g2 {
+			label = "LED_ID_DIMM_C3G2";
+			gpios = <&smb_svc_pex_cpu3_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3g1 {
+			label = "LED_ID_DIMM_C3G1";
+			gpios = <&smb_svc_pex_cpu3_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3h2 {
+			label = "LED_ID_DIMM_C3H2";
+			gpios = <&smb_svc_pex_cpu3_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3h1 {
+			label = "LED_ID_DIMM_C3H1";
+			gpios = <&smb_svc_pex_cpu3_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3a2 {
+			label = "LED_ID_DIMM_C3A2";
+			gpios = <&smb_svc_pex_cpu3_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3a1 {
+			label = "LED_ID_DIMM_C3A1";
+			gpios = <&smb_svc_pex_cpu3_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3b2 {
+			label = "LED_ID_DIMM_C3B2";
+			gpios = <&smb_svc_pex_cpu3_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3b1 {
+			label = "LED_ID_DIMM_C3B1";
+			gpios = <&smb_svc_pex_cpu3_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3c2 {
+			label = "LED_ID_DIMM_C3C2";
+			gpios = <&smb_svc_pex_cpu3_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3c1 {
+			label = "LED_ID_DIMM_C3C1";
+			gpios = <&smb_svc_pex_cpu3_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3d2 {
+			label = "LED_ID_DIMM_C3D2";
+			gpios = <&smb_svc_pex_cpu3_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3d1 {
+			label = "LED_ID_DIMM_C3D1";
+			gpios = <&smb_svc_pex_cpu3_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd01 {
+			label = "LED_ID_RSSD01";
+			gpios = <&smb_svc_pex_rssd01_16 0 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd02 {
+			label = "LED_ID_RSSD02";
+			gpios = <&smb_svc_pex_rssd01_16 1 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd03 {
+			label = "LED_ID_RSSD03";
+			gpios = <&smb_svc_pex_rssd01_16 2 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd04 {
+			label = "LED_ID_RSSD04";
+			gpios = <&smb_svc_pex_rssd01_16 3 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd05 {
+			label = "LED_ID_RSSD05";
+			gpios = <&smb_svc_pex_rssd01_16 4 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd06 {
+			label = "LED_ID_RSSD06";
+			gpios = <&smb_svc_pex_rssd01_16 5 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd07 {
+			label = "LED_ID_RSSD07";
+			gpios = <&smb_svc_pex_rssd01_16 6 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd08 {
+			label = "LED_ID_RSSD08";
+			gpios = <&smb_svc_pex_rssd01_16 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd09 {
+			label = "LED_ID_RSSD09";
+			gpios = <&smb_svc_pex_rssd01_16 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd10 {
+			label = "LED_ID_RSSD10";
+			gpios = <&smb_svc_pex_rssd01_16 9 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd11 {
+			label = "LED_ID_RSSD11";
+			gpios = <&smb_svc_pex_rssd01_16 10 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd12 {
+			label = "LED_ID_RSSD12";
+			gpios = <&smb_svc_pex_rssd01_16 11 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd13 {
+			label = "LED_ID_RSSD13";
+			gpios = <&smb_svc_pex_rssd01_16 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd14 {
+			label = "LED_ID_RSSD14";
+			gpios = <&smb_svc_pex_rssd01_16 13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd15 {
+			label = "LED_ID_RSSD15";
+			gpios = <&smb_svc_pex_rssd01_16 14 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd16 {
+			label = "LED_ID_RSSD16";
+			gpios = <&smb_svc_pex_rssd01_16 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd17 {
+			label = "LED_ID_RSSD17";
+			gpios = <&smb_svc_pex_rssd17_32 0 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd18 {
+			label = "LED_ID_RSSD18";
+			gpios = <&smb_svc_pex_rssd17_32 1 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd19 {
+			label = "LED_ID_RSSD19";
+			gpios = <&smb_svc_pex_rssd17_32 2 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd20 {
+			label = "LED_ID_RSSD20";
+			gpios = <&smb_svc_pex_rssd17_32 3 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd21 {
+			label = "LED_ID_RSSD21";
+			gpios = <&smb_svc_pex_rssd17_32 4 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd22 {
+			label = "LED_ID_RSSD22";
+			gpios = <&smb_svc_pex_rssd17_32 5 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd23 {
+			label = "LED_ID_RSSD23";
+			gpios = <&smb_svc_pex_rssd17_32 6 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd24 {
+			label = "LED_ID_RSSD24";
+			gpios = <&smb_svc_pex_rssd17_32 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd25 {
+			label = "LED_ID_RSSD25";
+			gpios = <&smb_svc_pex_rssd17_32 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd26 {
+			label = "LED_ID_RSSD26";
+			gpios = <&smb_svc_pex_rssd17_32 9 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd27 {
+			label = "LED_ID_RSSD27";
+			gpios = <&smb_svc_pex_rssd17_32 10 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd28 {
+			label = "LED_ID_RSSD28";
+			gpios = <&smb_svc_pex_rssd17_32 11 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd29 {
+			label = "LED_ID_RSSD29";
+			gpios = <&smb_svc_pex_rssd17_32 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd30 {
+			label = "LED_ID_RSSD30";
+			gpios = <&smb_svc_pex_rssd17_32 13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd31 {
+			label = "LED_ID_RSSD31";
+			gpios = <&smb_svc_pex_rssd17_32 14 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd32 {
+			label = "LED_ID_RSSD32";
+			gpios = <&smb_svc_pex_rssd17_32 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm01 {
+			label = "LED_ID_FAN_ASM01";
+			gpios = <&smb_svc_pex_rssd01_16 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm02 {
+			label = "LED_ID_FAN_ASM02";
+			gpios = <&smb_svc_pex_rssd01_16 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm03 {
+			label = "LED_ID_FAN_ASM03";
+			gpios = <&smb_svc_pex_rssd01_16 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm04 {
+			label = "LED_ID_FAN_ASM04";
+			gpios = <&smb_svc_pex_rssd01_16 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm05 {
+			label = "LED_ID_FAN_ASM05";
+			gpios = <&smb_svc_pex_rssd01_16 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm06 {
+			label = "LED_ID_FAN_ASM06";
+			gpios = <&smb_svc_pex_rssd01_16 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm07 {
+			label = "LED_ID_FAN_ASM07";
+			gpios = <&smb_svc_pex_rssd17_32 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm08 {
+			label = "LED_ID_FAN_ASM08";
+			gpios = <&smb_svc_pex_rssd17_32 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm09 {
+			label = "LED_ID_FAN_ASM09";
+			gpios = <&smb_svc_pex_rssd17_32 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm10 {
+			label = "LED_ID_FAN_ASM10";
+			gpios = <&smb_svc_pex_rssd17_32 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm11 {
+			label = "LED_ID_FAN_ASM11";
+			gpios = <&smb_svc_pex_rssd17_32 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm12 {
+			label = "LED_ID_FAN_ASM12";
+			gpios = <&smb_svc_pex_rssd17_32 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>, <&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>,
+			<&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>, <&adc1 4>, <&adc0 2>, <&adc1 0>,
+			<&p2V5_aux_vd 0>, <&p3v3_rtc_vd 0>;
+	};
+
+	p12v_vd: voltage-divider1 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1127/127 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <15>;
+		full-ohms = <133>;
+	};
+
+	p5v_aux_vd: voltage-divider2 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 5>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p5v_bmc_aux_vd: voltage-divider3 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p3v3_aux_vd: voltage-divider4 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 2>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p3v3_bmc_aux_vd: voltage-divider5 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p1v8_bmc_aux_vd: voltage-divider6 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 6>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 4000/3000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <3>;
+		full-ohms = <4>;
+	};
+
+	p2V5_aux_vd: voltage-divider7 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 1>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 2100/1100 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <11>;
+		full-ohms = <21>;
+	};
+
+	p3v3_rtc_vd: voltage-divider8 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 231000/100000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <100>;
+		full-ohms = <231>;
+	};
+
+	thermistor0: thermistor-0 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor1: thermistor-1 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 1>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor2: thermistor-2 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 4>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor3: thermistor-3 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 5>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	p12v: fixedregulator-p12v {
+		compatible = "regulator-fixed";
+		regulator-name = "p12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p3v3_bmc_aux: fixedregulator-p3v3-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_bmc_aux";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p1v2_bmc_aux: fixedregulator-p1v2-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v2_bmc_aux";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p12v-a-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_a>;
+	};
+
+	p12v-b-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_b>;
+	};
+
+	p12v-c-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_c>;
+	};
+
+	p12v-d-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_d>;
+	};
+
+	pvccinfaon-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu0>;
+	};
+
+	pvccfa-ehv-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu0>;
+	};
+
+	pvnn-main-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu0>;
+	};
+
+	pvccin-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu0>;
+	};
+
+	pvccfa-ehv-fivra-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu0>;
+	};
+
+	pvccd-hv-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu0>;
+	};
+
+	pvpp-hbm-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu0>;
+	};
+
+	pvccinfaon-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu1>;
+	};
+
+	pvccfa-ehv-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu1>;
+	};
+
+	pvnn-main-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu1>;
+	};
+
+	pvccin-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu1>;
+	};
+
+	pvccfa-ehv-fivra-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu1>;
+	};
+
+	pvccd-hv-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu1>;
+	};
+
+	pvpp-hbm-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu1>;
+	};
+
+	pvccinfaon-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu2>;
+	};
+
+	pvccfa-ehv-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu2>;
+	};
+
+	pvnn-main-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu2>;
+	};
+
+	pvccin-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu2>;
+	};
+
+	pvccfa-ehv-fivra-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu2>;
+	};
+
+	pvccd-hv-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu2>;
+	};
+
+	pvpp-hbm-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu2>;
+	};
+
+	pvccinfaon-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu3>;
+	};
+
+	pvccfa-ehv-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu3>;
+	};
+
+	pvnn-main-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu3>;
+	};
+
+	pvccin-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu3>;
+	};
+
+	pvccfa-ehv-fivra-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu3>;
+	};
+
+	pvccd-hv-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu3>;
+	};
+
+	pvpp-hbm-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu3>;
+	};
+
+	p1v05-pch-aux-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v05_pch_aux>;
+	};
+
+	p1v8-pch-aux-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v8_pch_aux>;
+	};
+
+	p3v3-pch-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p3v3_pch>;
+	};
+
+	p5v-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p5v>;
+	};
+
+	smb-m2-ssb-ssd2 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_smb_m2_ssb_ssd2>;
+	};
+
+	smb-m2-ssb-ssd1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_smb_m2_ssb_ssd1>;
+	};
+
+	ssb-rssd01-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd01>;
+	};
+
+	ssb-rssd01-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd01>;
+	};
+
+	ssb-rssd02-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd02>;
+	};
+
+	ssb-rssd02-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd02>;
+	};
+
+	ssb-rssd03-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd03>;
+	};
+
+	ssb-rssd03-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd03>;
+	};
+
+	ssb-rssd04-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd04>;
+	};
+
+	ssb-rssd04-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd04>;
+	};
+
+	ssb-rssd05-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd05>;
+	};
+
+	ssb-rssd05-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd05>;
+	};
+
+	ssb-rssd06-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd06>;
+	};
+
+	ssb-rssd06-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd06>;
+	};
+
+	ssb-rssd07-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd07>;
+	};
+
+	ssb-rssd07-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd07>;
+	};
+
+	ssb-rssd08-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd08>;
+	};
+
+	ssb-rssd08-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd08>;
+	};
+
+	ssb-rssd09-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd09>;
+	};
+
+	ssb-rssd09-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd09>;
+	};
+
+	ssb-rssd10-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd10>;
+	};
+
+	ssb-rssd10-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd10>;
+	};
+
+	ssb-rssd11-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd11>;
+	};
+
+	ssb-rssd11-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd11>;
+	};
+
+	ssb-rssd12-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd12>;
+	};
+
+	ssb-rssd12-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd12>;
+	};
+
+	ssb-rssd13-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd13>;
+	};
+
+	ssb-rssd13-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd13>;
+	};
+
+	ssb-rssd14-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd14>;
+	};
+
+	ssb-rssd14-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd14>;
+	};
+
+	ssb-rssd15-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd15>;
+	};
+
+	ssb-rssd15-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd15>;
+	};
+
+	ssb-rssd16-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd16>;
+	};
+
+	ssb-rssd16-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd16>;
+	};
+
+	ssb-rssd17-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd17>;
+	};
+
+	ssb-rssd17-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd17>;
+	};
+
+	ssb-rssd18-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd18>;
+	};
+
+	ssb-rssd18-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd18>;
+	};
+
+	ssb-rssd19-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd19>;
+	};
+
+	ssb-rssd19-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd19>;
+	};
+
+	ssb-rssd20-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd20>;
+	};
+
+	ssb-rssd20-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd20>;
+	};
+
+	ssb-rssd21-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd21>;
+	};
+
+	ssb-rssd21-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd21>;
+	};
+
+	ssb-rssd22-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd22>;
+	};
+
+	ssb-rssd22-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd22>;
+	};
+
+	ssb-rssd23-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd23>;
+	};
+
+	ssb-rssd23-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd23>;
+	};
+
+	ssb-rssd24-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd24>;
+	};
+
+	ssb-rssd24-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd24>;
+	};
+
+	ssb-rssd25-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd25>;
+	};
+
+	ssb-rssd25-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd25>;
+	};
+
+	ssb-rssd26-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd26>;
+	};
+
+	ssb-rssd26-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd26>;
+	};
+
+	ssb-rssd27-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd27>;
+	};
+
+	ssb-rssd27-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd27>;
+	};
+
+	ssb-rssd28-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd28>;
+	};
+
+	ssb-rssd28-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd28>;
+	};
+
+	ssb-rssd29-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd29>;
+	};
+
+	ssb-rssd29-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd29>;
+	};
+
+	ssb-rssd30-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd30>;
+	};
+
+	ssb-rssd30-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd30>;
+	};
+
+	ssb-rssd31-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd31>;
+	};
+
+	ssb-rssd31-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd31>;
+	};
+
+	ssb-rssd32-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd32>;
+	};
+
+	ssb-rssd32-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd32>;
+	};
+
+	p3v3-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p3v3_nic>;
+	};
+
+	p1v8-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v8_nic>;
+	};
+
+	p1v2-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v2_nic>;
+	};
+
+	pvcore-nic1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvcore_nic1>;
+	};
+
+	pvcore-nic2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvcore_nic2>;
+	};
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default>;
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(V, 7) GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <300>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <300>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		     &pinctrl_adc1_default
+		     &pinctrl_adc2_default
+		     &pinctrl_adc3_default
+		     &pinctrl_adc4_default
+		     &pinctrl_adc5_default
+		     &pinctrl_adc6_default
+		     &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+	aspeed,battery-sensing;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default
+		     &pinctrl_adc9_default
+		     &pinctrl_adc10_default
+		     &pinctrl_adc11_default
+		     &pinctrl_adc12_default
+		     &pinctrl_adc13_default
+		     &pinctrl_adc15_default>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&gpio0 {
+	status = "okay";
+	gpio-line-names =
+	/* A0 - A7 */
+	"", "", "", "", "", "", "", "",
+	/* B0 - B7 */
+	"", "", "FM_ADR_TRIGGER_R_N", "RST_PLTRST_BUF_N", "BMC_TPM_RESET_N", "BMC_TPM_IRQ_N",
+	"PCH_TPM_RESET_N", "PCH_TPM_IRQ_N",
+	/* C0 - C7 */
+	"", "", "", "", "", "", "", "",
+	/* D0 - D7 */
+	"", "", "", "", "", "", "", "",
+	/* E0 - E7 */
+	"", "", "", "", "", "", "", "",
+	/* F0 - F7 */
+	"", "", "", "BMC_MUX_CPU1_RST_INT_N", "BMC_MUX_CPU2_RST_INT_N", "", "", "",
+	/* G0 - G7 */
+	"FM_SSD_CLK_DRVR1_EN", "FM_CK440Q_DEV_EN", "BMC_MAC1_RESET_N", "FM_DB2000_DEV_EN",
+	"FM_CPU_RMCA_LVT3_N", "FM_CPU_CATERR_LVT3_N", "FM_DBP_PRESENT_N", "",
+	/* H0 - H7 */
+	"SMB_SVC_PEX_RSSD17_32_INT", "LED_BMC_RDY", "RST_DBP_N", "", "", "", "", "",
+	/* I0 - I7 */
+	"JTAG_MUX_MODE_SEL", "JTAG_MUX_TRANS_ENBL", "JTAG_MUX_LSP_SEL5", "JTAG_MUX_MSTR_SEL",
+	"JTAG_MUX_LSP_SEL3", "", "JTAG_MUX_ENBL_N", "JTAG_MUX_RST_N",
+	/* J0 - J7 */
+	"", "", "", "", "", "", "", "",
+	/* K0 - K7 */
+	"", "", "", "", "", "", "", "",
+	/* L0 - L7 */
+	"", "", "", "", "RST_RTCRST_N", "RST_SRTCRST_N", "", "",
+	/* M0 - M7 */
+	"BMC_UART1_CTS_N", "BMC_UART1_DCD_N", "BMC_UART1_DSR_N", "BMC_UART1_RI_N",
+	"BMC_UART1_DTR_N", "BMC_UART1_RTS_N", "", "",
+	/* N0 - N7 */
+	"IRQ_BMC_PCH_NMI", "", "FM_PCH_BMC_THERMTRIP_N", "FM_BIOS_POST_CMPLT_N", "RST_PLTRST_N",
+	"FM_FLASH_SEC_OVRD", "FM_SMI_ACTIVE_N", "PWRGD_DBP",
+	/* O0 - O7 */
+	"CATERR_CPU2_EN", "H_LVT1_THERMTRIP_N", "CATERR_CPU3_EN", "SMB_SVC_PEX_CPU0_LED_INT",
+	"H_LVT1_MEMTRIP_N", "", "CATERR_CPU1_EN", "FM_PCH_ADR_COMPLETE_N",
+	/* P0 - P7 */
+	"PWRGD_SYS_PWROK", "PWRGD_PCH_PWROK", "BMC_MUX_CPU3_RST_INT_N", "BMC_MUX_SVC_RSSD_INT",
+	"FM_SLPS4_N", "IRQ_SML0_ALERT_N", "FM_SLPS3_N", "LED_BMC_HB",
+	/* Q0 - Q7 */
+	"", "PEX_BMC_RST", "PEX_VR_CTRL_RST", "PEX_NIC_RST", "PEX_CPU0_LED_RST", "PEX_CPU1_LED_RST",
+	"PEX_CPU2_LED_RST", "PEX_CPU3_LED_RST",
+	/* R0 - R7 */
+	"BMC_MUX_FANSSB_RSSD17_32_RST_INT_N", "BMC_MUX_FANPWM_RSSD01_16_RST_INT_N",
+	"BMC_MUX_SVC_VR_RST_INT_N", "BMC_MUX_NIC_RST_INT_N", "BMC_MUX_SVC_EXP_RST_INT_N",
+	"FM_CPU_ERR2_LVT3_N", "BMC_MUX_CPU0_RST_INT_N", "BMC_MUX_M2_RST_INT_N",
+	/* S0 - S7 */
+	"SMB_SVC_PEX_RSSD01_16_INT", "RST_PCH_RSMRST_R_N", "", "", "BMC_ROT_FPGA_RESET_N",
+	"FM_SSD_CLK_DRVR0_EN", "", "",
+	/* T0 - T7 */
+	"", "", "", "", "", "", "", "",
+	/* U0 - U7 */
+	"", "", "", "", "", "", "", "",
+	/* V0 - V7 */
+	"BMC_PEX_IRQ_INT", "RTC_BATT_TEST", "SMB_PEX_VR_CTRL_INT", "SMB_SVC_PEX_CPU3_LED_INT",
+	"PWRGD_CPUPWRGD", "SMB_SVC_PEX_CPU2_LED_INT", "SMB_SVC_PEX_CPU1_LED_INT",
+	"BMC_MAC0_RESET_N",
+	/* W0 - W7 */
+	"", "", "", "", "", "", "", "",
+	/* X0 - X7 */
+	"", "", "", "", "", "", "", "",
+	/* Y0 - Y7 */
+	"FM_THROTTLE_N", "FM_PASSWORD_CLEAR_N", "H_LVT3_CATERR_DLY_N", "FM_CPU_OL_INT_R_N", "", "",
+	"", "",
+	/* Z0 - Z7 */
+	"FM_CPU_ERR0_LVT3_N", "FM_CPU_ERR1_LVT3_N", "BMC_MUX_VR_PCH_CPU_RST_INT_N",
+	"JTAG_MUX_LSP_SEL1", "", "JTAG_MUX_LSP_SEL4", "JTAG_MUX_LSP_SEL2", "";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_unbiased_default>;
+};
+
+&pinctrl {
+	pinctrl_gpio0_unbiased_default: gpio_default {
+		pins = "AB15", "AD14", "R23", "A18", "AD24", "AD15", "AE14", "AC15", "U25", "AA24",
+		       "V24", "W26", "AA23", "V26", "U24", "V25", "AE15", "C15", "F15";
+		bias-disable;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	bmc_mux_nic: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_nic: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&gpio0 ASPEED_GPIO(Q, 3) GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <19 1>, <22 6>, <30 6>, <38 2>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"IRQ_NIC2_OVT_WRNG", "FM_NIC2_ALLSTANDBY_N", "IRQ_NIC2_OVT_SHTDN",
+				"SMB_VR_PVCORE_NIC2_ALERT_N", "FM_NIC2_PERST1_N",
+				"SMB_NIC2_ALERT_N", "FM_NIC2_PERST3_N", "FM_NIC2_PERST2_N",
+				/* GPORT1 */
+				"FM_NIC1_RST_N", "FM_NIC1_PERST0_N", "FM_NIC1_PERST2_N",
+				"FM_NIC1_PERST3_N", "SMB_NIC1_ALERT_N", "FM_NIC1_PERST1_N",
+				"SMB_VR_PVCORE_NIC1_ALERT_N", "IRQ_NIC1_OVT_SHTDN",
+				/* GPORT2 */
+				"SMB_VR_P3V3_NIC_ALERT_N", "FM_NIC2_FLASH_PRSNT",
+				"FM_NIC1_FLASH_PRSNT", "",
+				/* GPORT3 */
+				"FM_NIC2_PERST0_N", "FM_NIC2_RST_N", "", "", "", "", "", "",
+				/* GPORT4 */
+				"FM_NIC1_ALLSTANDBY_N", "IRQ_NIC1_OVT_WRNG", "", "", "", "", "", "",
+				/* GPORT5 */
+				"SMB_VR_P1V8_NIC_ALERT_N", "SMB_VR_P1V2_NIC_ALERT_N", "", "";
+
+				pinctrl-0 = <&U62160_pins>;
+				pinctrl-names = "default";
+				U62160_pins: cfg-pins {
+					pins = "gp03", "gp16", "gp20", "gp50", "gp51";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvcore_nic2: ir38263-pvcore-nic2@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "pvcore_nic2";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvcore_nic1: ir38263-pvcore-nic1@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "pvcore_nic1";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p3v3_nic: ir38263-p3v3-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p3v3_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v2_nic: ir38263-p1v2-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v2_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v8_nic: ir38263-p1v8-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v8_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2cmux1: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 7) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_m2_ssb_ssd1: regulator@3a {
+				compatible = "maxim,max5978";
+				reg = <0x3a>;
+				vss1-supply = <&p3v3_aux>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						label = "m2_ssb_ssd1:green:power";
+						default-state = "off";
+					};
+				};
+
+				regulators {
+					sw0_smb_m2_ssb_ssd1: sw0 {
+						shunt-resistor-micro-ohms = <12000>;
+						regulator-over-current-protection;
+						regulator-oc-protection-microamp = <2800000>;
+						regulator-name = "p3v3_m2_ssd1";
+						regulator-enable-ramp-delay = <10000>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_m2_ssb_ssd2: regulator@3a {
+				compatible = "maxim,max5978";
+				reg = <0x3a>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <39 IRQ_TYPE_LEVEL_LOW>;
+				vss1-supply = <&p3v3_aux>;
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						label = "m2_ssb_ssd2:green:power";
+						default-state = "off";
+					};
+				};
+
+				regulators {
+					sw0_smb_m2_ssb_ssd2: sw0 {
+						shunt-resistor-micro-ohms = <12000>;
+						regulator-over-current-protection;
+						regulator-oc-protection-microamp = <2800000>;
+						regulator-name = "p3v3_m2_ssd2";
+						regulator-enable-ramp-delay = <10000>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+
+	bmc-slave@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2cmux2: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(Z, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v05_pch_aux: ir38263-p1v05-pch-aux@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v05_pch_aux";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v8_pch_aux: ir38060-p1v8-pch-aux@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+
+				regulator-name = "p1v8_pch_aux";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	i2cmux13: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 6) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu0_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu0_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU0", "PWRGD_CHC_CPU0",
+				"PWRGD_CHB_CPU0", "PWRGD_CHA_CPU0",
+				"PWRGD_CHE_CPU0", "PWRGD_CHF_CPU0",
+				"PWRGD_CHG_CPU0", "PWRGD_CHH_CPU0",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU0_ALERT_N", "SMB_VR_PVCCINFAON_CPU0_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU0_ALERT_N", "SMB_VR_PVCCD_HV_CPU0_ALERT_N",
+				"SMB_VR_PVCCIN_CPU0_ALERT_N", "SEL_SMB_DIMM_CPU0",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU0_AB_DRAM_G", "PWRGD_LVC3_CPU0_CD_DRAM_G",
+				"PWRGD_LVC3_CPU0_EF_DRAM_G", "PWRGD_LVC3_CPU0_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU0_DISABLE_COD_N", "",
+				"RST_LVC3_CPU0_RESET_N", "PWRGD_LVC3_CPU0_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU0_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU0_PROCHOT_N", "H_LVT3_CPU0_MEMHOT_IN_N",
+				"H_LVT3_CPU0_MEMHOT_OUT_N", "H_LVT3_CPU0_MEMTRIP_OUT_N",
+				"H_LVT3_CPU0_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU0_NMI", "FM_S3M_CPU0_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU0_PKG_ID0", "FM_CPU0_PKG_ID1",
+				"FM_CPU0_PROC_ID0", "FM_CPU0_PROC_ID1";
+
+				pinctrl-0 = <&U62080_pins>;
+				pinctrl-names = "default";
+				U62080_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu0@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu0: vout0 {
+						regulator-name = "pvccinfaon_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu0: vout1 {
+						regulator-name = "pvccfa_ehv_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu0: vout {
+						regulator-name = "pvnn_main_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu0@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu0: vout0 {
+						regulator-name = "pvccin_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu0: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu0: vout {
+						regulator-name = "pvccd_hv_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu0: vout {
+						regulator-name = "pvpp_hbm_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2cmux4: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(F, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu1_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu1_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU1", "PWRGD_CHC_CPU1",
+				"PWRGD_CHB_CPU1", "PWRGD_CHA_CPU1",
+				"PWRGD_CHE_CPU1", "PWRGD_CHF_CPU1",
+				"PWRGD_CHG_CPU1", "PWRGD_CHH_CPU1",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU1_ALERT_N", "SMB_VR_PVCCINFAON_CPU1_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU1_ALERT_N", "SMB_VR_PVCCD_HV_CPU1_ALERT_N",
+				"SMB_VR_PVCCIN_CPU1_ALERT_N", "SEL_SMB_DIMM_CPU1",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU1_AB_DRAM_G", "PWRGD_LVC3_CPU1_CD_DRAM_G",
+				"PWRGD_LVC3_CPU1_EF_DRAM_G", "PWRGD_LVC3_CPU1_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU1_DISABLE_COD_N", "",
+				"RST_LVC3_CPU1_RESET_N", "PWRGD_LVC3_CPU1_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU1_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU1_PROCHOT_N", "H_LVT3_CPU1_MEMHOT_IN_N",
+				"H_LVT3_CPU1_MEMHOT_OUT_N", "H_LVT3_CPU1_MEMTRIP_OUT_N",
+				"H_LVT3_CPU1_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU1_NMI", "FM_S3M_CPU1_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU1_PKG_ID0", "FM_CPU1_PKG_ID1",
+				"FM_CPU1_PROC_ID0", "FM_CPU1_PROC_ID1";
+
+				pinctrl-0 = <&U62090_pins>;
+				pinctrl-names = "default";
+				U62090_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu1@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu1: vout0 {
+						regulator-name = "pvccinfaon_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu1: vout1 {
+						regulator-name = "pvccfa_ehv_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu1: vout {
+						regulator-name = "pvnn_main_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu1@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu1: vout0 {
+						regulator-name = "pvccin_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu1: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu1: vout {
+						regulator-name = "pvccd_hv_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu1: vout {
+						regulator-name = "pvpp_hbm_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2cmux3: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu2_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu2_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU2", "PWRGD_CHC_CPU2",
+				"PWRGD_CHB_CPU2", "PWRGD_CHA_CPU2",
+				"PWRGD_CHE_CPU2", "PWRGD_CHF_CPU2",
+				"PWRGD_CHG_CPU2", "PWRGD_CHH_CPU2",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU2_ALERT_N", "SMB_VR_PVCCINFAON_CPU2_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU2_ALERT_N", "SMB_VR_PVCCD_HV_CPU2_ALERT_N",
+				"SMB_VR_PVCCIN_CPU2_ALERT_N", "SEL_SMB_DIMM_CPU2",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU2_AB_DRAM_G", "PWRGD_LVC3_CPU2_CD_DRAM_G",
+				"PWRGD_LVC3_CPU2_EF_DRAM_G", "PWRGD_LVC3_CPU2_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU2_DISABLE_COD_N", "",
+				"RST_LVC3_CPU2_RESET_N", "PWRGD_LVC3_CPU2_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU2_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU2_PROCHOT_N", "H_LVT3_CPU2_MEMHOT_IN_N",
+				"H_LVT3_CPU2_MEMHOT_OUT_N", "H_LVT3_CPU2_MEMTRIP_OUT_N",
+				"H_LVT3_CPU2_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU2_NMI", "FM_S3M_CPU2_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU2_PKG_ID0", "FM_CPU2_PKG_ID1",
+				"FM_CPU2_PROC_ID0", "FM_CPU2_PROC_ID1";
+
+				pinctrl-0 = <&U62100_pins>;
+				pinctrl-names = "default";
+				U62100_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu2@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu2: vout0 {
+						regulator-name = "pvccinfaon_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu2: vout1 {
+						regulator-name = "pvccfa_ehv_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu2: vout {
+						regulator-name = "pvnn_main_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu2@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu2: vout0 {
+						regulator-name = "pvccin_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu2: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu2: vout {
+						regulator-name = "pvccd_hv_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu2: vout {
+						regulator-name = "pvpp_hbm_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	i2cmux22: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(P, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu3_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu3_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU3", "PWRGD_CHC_CPU3",
+				"PWRGD_CHB_CPU3", "PWRGD_CHA_CPU3",
+				"PWRGD_CHE_CPU3", "PWRGD_CHF_CPU3",
+				"PWRGD_CHG_CPU3", "PWRGD_CHH_CPU3",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU3_ALERT_N", "SMB_VR_PVCCINFAON_CPU3_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU3_ALERT_N", "SMB_VR_PVCCD_HV_CPU3_ALERT_N",
+				"SMB_VR_PVCCIN_CPU3_ALERT_N", "SEL_SMB_DIMM_CPU3",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU3_AB_DRAM_G", "PWRGD_LVC3_CPU3_CD_DRAM_G",
+				"PWRGD_LVC3_CPU3_EF_DRAM_G", "PWRGD_LVC3_CPU3_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU3_DISABLE_COD_N", "",
+				"RST_LVC3_CPU3_RESET_N", "PWRGD_LVC3_CPU3_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU3_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU3_PROCHOT_N", "H_LVT3_CPU3_MEMHOT_IN_N",
+				"H_LVT3_CPU3_MEMHOT_OUT_N", "H_LVT3_CPU3_MEMTRIP_OUT_N",
+				"H_LVT3_CPU3_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU3_NMI", "FM_S3M_CPU3_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU3_PKG_ID0", "FM_CPU3_PKG_ID1",
+				"FM_CPU3_PROC_ID0", "FM_CPU3_PROC_ID1";
+
+				pinctrl-0 = <&U62110_pins>;
+				pinctrl-names = "default";
+				U62110_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu3@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu3: vout0 {
+						regulator-name = "pvccinfaon_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu3: vout1 {
+						regulator-name = "pvccfa_ehv_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu3: vout {
+						regulator-name = "pvnn_main_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu3@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu3: vout0 {
+						regulator-name = "pvccin_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu3: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu3: vout {
+						regulator-name = "pvccd_hv_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu3: vout {
+						regulator-name = "pvpp_hbm_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2cmux14: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux15: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 11 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux16: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 2 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux17: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 0 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux18: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 3 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux19: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 9 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_rssd17_32: pinctrl@20 {
+				compatible = "cypress,cy8c9560";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&bmc_pex_irq>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&bmc_pex_irq 19 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <48 12>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"RSSD17_SMBRST_N", "RSSD18_SMBRST_N",
+				"RSSD19_SMBRST_N", "RSSD20_SMBRST_N",
+				"RSSD21_SMBRST_N", "RSSD22_SMBRST_N",
+				"RSSD23_SMBRST_N", "RSSD24_SMBRST_N",
+				/* GPORT1 */
+				"RSSD25_SMBRST_N", "RSSD26_SMBRST_N",
+				"RSSD27_SMBRST_N", "RSSD28_SMBRST_N",
+				"RSSD29_SMBRST_N", "RSSD30_SMBRST_N",
+				"RSSD31_SMBRST_N", "RSSD32_SMBRST_N",
+				/* GPORT2 */
+				"RSSD17_PWRDIS", "RSSD18_PWRDIS",
+				"RSSD19_PWRDIS", "RSSD20_PWRDIS",
+				/* GPORT3 */
+				"RSSD21_PWRDIS", "RSSD22_PWRDIS",
+				"RSSD23_PWRDIS", "RSSD24_PWRDIS",
+				"RSSD25_PWRDIS", "RSSD26_PWRDIS",
+				"RSSD27_PWRDIS", "RSSD28_PWRDIS",
+				/* GPORT4 */
+				"RSSD29_PWRDIS", "RSSD30_PWRDIS",
+				"RSSD31_PWRDIS", "RSSD32_PWRDIS",
+				"RSSD17_RESET_N", "RSSD18_RESET_N",
+				"RSSD19_RESET_N", "RSSD20_RESET_N",
+				/* GPORT5 */
+				"RSSD21_RESET_N", "RSSD22_RESET_N",
+				"RSSD23_RESET_N", "RSSD24_RESET_N",
+				"RSSD25_RESET_N", "RSSD26_RESET_N",
+				"RSSD27_RESET_N", "RSSD28_RESET_N",
+				/* GPORT6 */
+				"RSSD29_RESET_N", "RSSD30_RESET_N",
+				"RSSD31_RESET_N", "RSSD32_RESET_N",
+				"", "",
+				"", "",
+				/* GPORT7 */
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux20: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 4 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux21: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 5 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2cmux5: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 0) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux6: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 16 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux7: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux8: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 1 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux9: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux10: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_rssd_01_16: pinctrl@20 {
+				compatible = "cypress,cy8c9560";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&bmc_pex_irq>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&bmc_pex_irq 18 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <48 12>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"RSSD01_SMBRST_N", "RSSD02_SMBRST_N",
+				"RSSD03_SMBRST_N", "RSSD04_SMBRST_N",
+				"RSSD05_SMBRST_N", "RSSD06_SMBRST_N",
+				"RSSD07_SMBRST_N", "RSSD08_SMBRST_N",
+				/* GPORT1 */
+				"RSSD09_SMBRST_N", "RSSD10_SMBRST_N",
+				"RSSD11_SMBRST_N", "RSSD12_SMBRST_N",
+				"RSSD13_SMBRST_N", "RSSD14_SMBRST_N",
+				"RSSD15_SMBRST_N", "RSSD16_SMBRST_N",
+				/* GPORT2 */
+				"RSSD01_PWRDIS", "RSSD02_PWRDIS",
+				"RSSD03_PWRDIS", "RSSD04_PWRDIS",
+				/* GPORT3 */
+				"RSSD05_PWRDIS", "RSSD06_PWRDIS",
+				"RSSD07_PWRDIS", "RSSD08_PWRDIS",
+				"RSSD09_PWRDIS", "RSSD10_PWRDIS",
+				"RSSD11_PWRDIS", "RSSD12_PWRDIS",
+				/* GPORT4 */
+				"RSSD13_PWRDIS", "RSSD14_PWRDIS",
+				"RSSD15_PWRDIS", "RSSD16_PWRDIS",
+				"RSSD01_RESET_N", "RSSD02_RESET_N",
+				"RSSD03_RESET_N", "RSSD04_RESET_N",
+				/* GPORT5 */
+				"RSSD05_RESET_N", "RSSD06_RESET_N",
+				"RSSD07_RESET_N", "RSSD08_RESET_N",
+				"RSSD09_RESET_N", "RSSD10_RESET_N",
+				"RSSD11_RESET_N", "RSSD12_RESET_N",
+				/* GPORT6 */
+				"RSSD13_RESET_N", "RSSD14_RESET_N",
+				"RSSD15_RESET_N", "RSSD16_RESET_N",
+				"", "",
+				"", "",
+				/* GPORT7 */
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux11: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 12 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux12: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 14 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2cmux23: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 4) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_bmc_aux>;
+	};
+};
+
+&i2cmux23 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_pex_vr_ctrl: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 2) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"BCM0_INPUT_DISABLE_N", "SMB_VR_P3V3_AUX_ALERT_N",
+			"SMB_PEX_CPU1_EVENT_INT", "SMB_PEX_CPU2_EVENT_INT",
+			"DPIC0_VOLTAGE_DETECTB_N", "DPIC0_VOLTAGE_DETECTA_N",
+			"DPIC1_VOLTAGE_DETECTA_N", "DPIC1_VOLTAGE_DETECTB_N",
+			/* GPORT1 */
+			"SMB_PEX_NIC_INT", "SMB_VR_P1V05_PCH_AUX_ALERT_N",
+			"SMB_PEX_CPU0_EVENT_INT", "SMB_PEX_CPU3_EVENT_INT",
+			"LED_ID_TPM", "PLUG_DETECT_TPM",
+			"PLUG_DETECT_M2_SSD_CARRIER1", "RST_M2_SSD1_PERST_N",
+			/* GPORT2 */
+			"LED_ID_BAT", "LED_ID_MGMT_PORT2",
+			"LED_ID_MGMT_PORT1", "SMB_VR_P5V_AUX_ALERT_N",
+			/* GPORT3 */
+			"SMB_VR_AUX_SSB_ALERT_N", "BCM1_INPUT_DISABLE_N",
+			"LED_ID_NIC1_PORT1", "LED_ID_NIC1_PORT2",
+			"LED_ID_NIC2_PORT1", "LED_ID_NIC2_PORT2",
+			"RST_M2_SSD2_PERST_N", "PLUG_DETECT_M2_SSD2",
+			/* GPORT4 */
+			"PLUG_DETECT_BAT", "PLUG_DETECT_M2_SSD1",
+			"M2_SSD1_SSB_ALERT_N", "BCM2_INPUT_DISABLE_N",
+			"SMB_VR_P1V8_PCH_AUX_ALERT_N", "BCM3_INPUT_DISABLE_N",
+			"LED_PWR_DWR_BACK", "LED_ID_DWR_BACK_P",
+			/* GPORT5 */
+			"LED_ID_M2_SSD2", "LED_ID_M2_SSD1",
+			"PLUG_DETECT_M2_SSD_CARRIER2", "M2_SSD2_SSB_ALERT_N";
+
+			pinctrl-0 = <&U62120_input &U62120_input_pullup>;
+			pinctrl-names = "default";
+			U62120_input: input-pins {
+				pins = "gp10";
+				function = "gpio";
+				input-enable;
+				bias-disable;
+			};
+			U62120_input_pullup: input-pullup-pins {
+				pins = "gp01", "gp02", "gp03", "gp11", "gp12", "gp13",
+				"gp23", "gp30", "gp40", "gp42", "gp44", "gp53";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		bmc_pex_irq: pinctrl@20 {
+			compatible = "cypress,cy8c9520";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 1) GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"SMB_MUX_PWM_FANGRP2_RST_INT_N", "SMB_MUX_SSB_FANGRP2_RST_INT_N",
+			"SMB_MUX_PWM_FANGRP1_RST_INT_N", "SMB_MUX_SSB_RSSD01_08_RST_INT_N",
+			"SMB_MUX_RSSD01_08_RST_INT_N", "SMB_MUX_RSSD09_16_RST_INT_N",
+			"SMB_PEX_RSSD01_16_INT", "SMB_MUX_SSB_FANGRP1_RST_INT_N",
+			/* GPORT1 */
+			"SMB_SVC_PEX_FAN_ALERT_INT", "SMB_MUX_SSB_RSSD09_16_RST_INT_N",
+			"SMB_MUX_SSB_RSSD17_24_RST_INT_N", "SMB_MUX_PWM_FANGRP0_RST_INT_N",
+			"SMB_MUX_RSSD17_24_RST_INT_N", "SMB_PEX_RSSD17_32_INT",
+			"SMB_MUX_RSSD25_32_RST_INT_N", "SMB_MUX_SSB_RSSD25_32_RST_INT_N",
+			/* GPORT2 */
+			"SMB_MUX_SSB_FANGRP0_RST_INT_N", "PEX_FAN_ALERT_RST",
+			"PEX_RSSD01_16_RST", "PEX_RSSD17_32_RST";
+			pinctrl-0 = <&U60000_pins>;
+			pinctrl-names = "default";
+			U60000_pins: cfg-pins {
+				pins = "gp06", "gp10", "gp15";
+				function = "gpio";
+				input-enable;
+				bias-disable;
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2cmux24: mux@70 {
+			compatible = "maxim,max7357";
+			reg = <0x70>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdd-supply = <&p3v3_bmc_aux>;
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		eeprom@51 {
+			compatible = "atmel,24c32";
+			reg = <0x51>;
+			pagesize = <32>;
+			vcc-supply = <&p3v3_bmc_aux>;
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2cmux25: mux@70 {
+			compatible = "maxim,max7357";
+			reg = <0x70>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2cmux25 {
+	reset-gpios = <&gpio0 ASPEED_GPIO(R, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+	vdd-supply = <&p3v3_bmc_aux>;
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		p5v_aux: ir38263-p5v-aux@40 {
+			compatible = "infineon,ir38263";
+			reg = <0x40>;
+
+			regulator-name = "p5v_aux";
+			regulator-enable-ramp-delay = <2000>;
+			vin-supply = <&p12v>;
+			vbus-supply = <&p3v3_bmc_aux>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		p3v3_aux: ir38263-p3v3-aux@40 {
+			compatible = "infineon,ir38263";
+			reg = <0x40>;
+
+			vin-supply = <&p12v>;
+			regulator-name = "p3v3_aux";
+			/*
+			 * 2msec for regulator + 18msec for board capacitance
+			 * Note: Every IC has a PTC which slowly charges the bypass
+			 * cap.
+			 */
+			regulator-enable-ramp-delay = <200000>;
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		aux_ssb: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_pex_vr_ctrl>;
+			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+			vss1-supply = <&p5v_aux>;
+			vss2-supply = <&p3v3_aux>;
+			regulators {
+				p5v: sw0 {
+					regulator-name = "p5v";
+					shunt-resistor-micro-ohms = <12000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <100000>;
+				};
+				p3v3_pch: sw1 {
+					regulator-name = "p3v3_pch";
+					shunt-resistor-micro-ohms = <12000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <100000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_a: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_a: vout2 {
+					regulator-name = "bcm0";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_b: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_b: vout2 {
+					regulator-name = "bcm1";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_c: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_c: vout2 {
+					regulator-name = "bcm2";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_d: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_d: vout2 {
+					regulator-name = "bcm3";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux24 {
+
+	reset-gpios = <&gpio0 ASPEED_GPIO(P, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+	i2c@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		smb_svc_pex_rssd01_16: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&smb_svc_pex_cpu0_led 17 GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"LED_ID_RSSD01", "LED_ID_RSSD02",
+			"LED_ID_RSSD03", "LED_ID_RSSD04",
+			"LED_ID_RSSD05", "LED_ID_RSSD06",
+			"LED_ID_RSSD07", "LED_ID_RSSD08",
+			/* GPORT1 */
+			"LED_ID_RSSD09", "LED_ID_RSSD10",
+			"LED_ID_RSSD11", "LED_ID_RSSD12",
+			"LED_ID_RSSD13", "LED_ID_RSSD14",
+			"LED_ID_RSSD15", "LED_ID_RSSD16",
+			/* GPORT2 */
+			"RSSD01_PRESENT_N", "RSSD02_PRESENT_N",
+			"RSSD03_PRESENT_N", "RSSD04_PRESENT_N",
+			/* GPORT3 */
+			"RSSD05_PRESENT_N", "RSSD06_PRESENT_N",
+			"RSSD07_PRESENT_N", "RSSD08_PRESENT_N",
+			"RSSD09_PRESENT_N", "RSSD10_PRESENT_N",
+			"RSSD11_PRESENT_N", "RSSD12_PRESENT_N",
+			/* GPORT4 */
+			"RSSD13_PRESENT_N", "RSSD14_PRESENT_N",
+			"RSSD15_PRESENT_N", "RSSD16_PRESENT_N",
+			"LED_ID_FAN_ASM01", "LED_ID_FAN_ASM02",
+			"LED_ID_FAN_ASM03", "LED_ID_FAN_ASM04",
+			/* GPORT5 */
+			"LED_ID_FAN_ASM05", "LED_ID_FAN_ASM06",
+			"PLUG_DETECT_FAN_ASM01", "PLUG_DETECT_FAN_ASM02",
+			"PLUG_DETECT_FAN_ASM03", "PLUG_DETECT_FAN_ASM04",
+			"PLUG_DETECT_FAN_ASM05", "PLUG_DETECT_FAN_ASM06",
+			/* GPORT6 */
+			"SSB_RSSD01_ALERT_N", "SSB_RSSD02_ALERT_N",
+			"SSB_RSSD03_ALERT_N", "SSB_RSSD04_ALERT_N",
+			"SSB_RSSD05_ALERT_N", "SSB_RSSD06_ALERT_N",
+			"SSB_RSSD07_ALERT_N", "SSB_RSSD08_ALERT_N",
+			/* GPORT7 */
+			"SSB_RSSD09_ALERT_N", "SSB_RSSD10_ALERT_N",
+			"SSB_RSSD11_ALERT_N", "SSB_RSSD12_ALERT_N",
+			"SSB_RSSD13_ALERT_N", "SSB_RSSD14_ALERT_N",
+			"SSB_RSSD15_ALERT_N", "SSB_RSSD16_ALERT_N";
+			pinctrl-0 = <&U65200_pins>;
+			pinctrl-names = "default";
+			U65200_pins: cfg-pins {
+				pins = "gp60", "gp61", "gp62", "gp63", "gp64",
+				       "gp65", "gp66", "gp67", "gp70", "gp71",
+				       "gp72", "gp73", "gp74", "gp75", "gp76",
+				       "gp77";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_rssd17_32: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(H, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&smb_svc_pex_cpu1_led 17 GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"LED_ID_RSSD17", "LED_ID_RSSD18",
+			"LED_ID_RSSD19", "LED_ID_RSSD20",
+			"LED_ID_RSSD21", "LED_ID_RSSD22",
+			"LED_ID_RSSD23", "LED_ID_RSSD24",
+			/* GPORT1 */
+			"LED_ID_RSSD25", "LED_ID_RSSD26",
+			"LED_ID_RSSD27", "LED_ID_RSSD28",
+			"LED_ID_RSSD29", "LED_ID_RSSD30",
+			"LED_ID_RSSD31", "LED_ID_RSSD32",
+			/* GPORT2 */
+			"RSSD17_PRESENT_N", "RSSD18_PRESENT_N",
+			"RSSD19_PRESENT_N", "RSSD20_PRESENT_N",
+			/* GPORT3 */
+			"RSSD21_PRESENT_N", "RSSD22_PRESENT_N",
+			"RSSD23_PRESENT_N", "RSSD24_PRESENT_N",
+			"RSSD25_PRESENT_N", "RSSD26_PRESENT_N",
+			"RSSD27_PRESENT_N", "RSSD28_PRESENT_N",
+			/* GPORT4 */
+			"RSSD29_PRESENT_N", "RSSD30_PRESENT_N",
+			"RSSD31_PRESENT_N", "RSSD32_PRESENT_N",
+			"LED_ID_FAN_ASM07", "LED_ID_FAN_ASM08",
+			"LED_ID_FAN_ASM09", "LED_ID_FAN_ASM10",
+			/* GPORT5 */
+			"LED_ID_FAN_ASM11", "LED_ID_FAN_ASM12",
+			"PLUG_DETECT_FAN_ASM07", "PLUG_DETECT_FAN_ASM08",
+			"PLUG_DETECT_FAN_ASM09", "PLUG_DETECT_FAN_ASM10",
+			"PLUG_DETECT_FAN_ASM11", "PLUG_DETECT_FAN_ASM12",
+			/* GPORT6 */
+			"SSB_RSSD17_ALERT_N", "SSB_RSSD18_ALERT_N",
+			"SSB_RSSD19_ALERT_N", "SSB_RSSD20_ALERT_N",
+			"SSB_RSSD21_ALERT_N", "SSB_RSSD22_ALERT_N",
+			"SSB_RSSD23_ALERT_N", "SSB_RSSD24_ALERT_N",
+			/* GPORT7 */
+			"SSB_RSSD25_ALERT_N", "SSB_RSSD26_ALERT_N",
+			"SSB_RSSD27_ALERT_N", "SSB_RSSD28_ALERT_N",
+			"SSB_RSSD29_ALERT_N", "SSB_RSSD30_ALERT_N",
+			"SSB_RSSD31_ALERT_N", "SSB_RSSD32_ALERT_N";
+			pinctrl-0 = <&U65300_pins>;
+			pinctrl-names = "default";
+			U65300_pins: cfg-pins {
+				pins = "gp60", "gp61", "gp62",
+				"gp63", "gp64", "gp65", "gp66",
+				"gp67", "gp70", "gp71", "gp72",
+				"gp73", "gp74", "gp75", "gp76",
+				"gp77";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu1_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 6) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 5) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <18 2>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C1E2", "PLUG_DETECT_DIMM_C1E1",
+			"PLUG_DETECT_DIMM_C1F2", "PLUG_DETECT_DIMM_C1F1",
+			"PLUG_DETECT_DIMM_C1G2", "PLUG_DETECT_DIMM_C1G1",
+			"PLUG_DETECT_DIMM_C1H2", "PLUG_DETECT_DIMM_C1H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C1D1", "PLUG_DETECT_DIMM_C1D2",
+			"PLUG_DETECT_DIMM_C1C1", "PLUG_DETECT_DIMM_C1C2",
+			"PLUG_DETECT_DIMM_C1B1", "PLUG_DETECT_DIMM_C1B2",
+			"PLUG_DETECT_DIMM_C1A1", "PLUG_DETECT_DIMM_C1A2",
+			/* GPORT2 */
+			"PEX_CPU1_EVENT_RST", "SVC_PEX_RSSD17_32_RST",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C1E2", "LED_ID_DIMM_C1E1",
+			"LED_ID_DIMM_C1F2", "LED_ID_DIMM_C1F1",
+			"LED_ID_DIMM_C1G2", "LED_ID_DIMM_C1G1",
+			"LED_ID_DIMM_C1H2", "LED_ID_DIMM_C1H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C1A2", "LED_ID_DIMM_C1A1",
+			"LED_ID_DIMM_C1B2", "LED_ID_DIMM_C1B1",
+			"LED_ID_DIMM_C1C2", "LED_ID_DIMM_C1C1",
+			"LED_ID_DIMM_C1D2", "LED_ID_DIMM_C1D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU1_SKTOCC_N", "LED_ID_CPU1";
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_fan_alert: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&bmc_pex_irq>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_aux>;
+			reset-gpios = <&bmc_pex_irq 17 GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <24 3>, <51 9>;
+			gpio-line-names =
+			/* GPORT0 */
+			"FAN01_SSB_ALERT_N", "FAN02_SSB_ALERT_N",
+			"FAN03_SSB_ALERT_N", "FAN04_SSB_ALERT_N",
+			"FAN05_SSB_ALERT_N", "FAN06_SSB_ALERT_N",
+			"FAN07_SSB_ALERT_N", "FAN08_SSB_ALERT_N",
+			/* GPORT1 */
+			"FAN09_SSB_ALERT_N", "FAN10_SSB_ALERT_N",
+			"FAN11_SSB_ALERT_N", "FAN12_SSB_ALERT_N",
+			"FAN13_SSB_ALERT_N", "FAN14_SSB_ALERT_N",
+			"FAN15_SSB_ALERT_N", "FAN16_SSB_ALERT_N",
+			/* GPORT2 */
+			"FAN17_SSB_ALERT_N", "FAN18_SSB_ALERT_N",
+			"FAN19_SSB_ALERT_N", "FAN20_SSB_ALERT_N",
+			/* GPORT3 */
+			"FAN21_SSB_ALERT_N", "FAN22_SSB_ALERT_N",
+			"FAN23_SSB_ALERT_N", "FAN24_SSB_ALERT_N",
+			"", "",
+			"", "FAN01_PWM_ALERT_N",
+			/* GPORT4 */
+			"FAN02_PWM_ALERT_N", "FAN03_PWM_ALERT_N",
+			"FAN04_PWM_ALERT_N", "FAN05_PWM_ALERT_N",
+			"FAN06_PWM_ALERT_N", "FAN07_PWM_ALERT_N",
+			"FAN08_PWM_ALERT_N", "FAN09_PWM_ALERT_N",
+			/* GPORT5 */
+			"FAN10_PWM_ALERT_N", "FAN11_PWM_ALERT_N",
+			"FAN12_PWM_ALERT_N", "FAN13_PWM_ALERT_N",
+			"FAN14_PWM_ALERT_N", "FAN15_PWM_ALERT_N",
+			"FAN16_PWM_ALERT_N", "FAN17_PWM_ALERT_N",
+			/* GPORT6 */
+			"FAN18_PWM_ALERT_N", "FAN19_PWM_ALERT_N",
+			"FAN20_PWM_ALERT_N", "FAN21_PWM_ALERT_N",
+			"FAN22_PWM_ALERT_N", "FAN23_PWM_ALERT_N",
+			"FAN24_PWM_ALERT_N", "",
+			/* GPORT7 */
+			"", "",
+			"", "",
+			"", "",
+			"", "";
+			pinctrl-0 = <&U65600_pins>;
+			pinctrl-names = "default";
+			U65600_pins: cfg-pins {
+				pins = "gp00", "gp01", "gp02",
+				"gp03", "gp04", "gp05", "gp06",
+				"gp07", "gp10", "gp11", "gp12",
+				"gp13", "gp14", "gp15", "gp16",
+				"gp17", "gp20", "gp21", "gp22",
+				"gp23", "gp30", "gp31", "gp32",
+				"gp33", "gp37", "gp40", "gp41",
+				"gp42", "gp43", "gp44", "gp45",
+				"gp46", "gp47", "gp50", "gp51",
+				"gp52", "gp53", "gp54", "gp55",
+				"gp56", "gp57", "gp60", "gp61",
+				"gp62", "gp63", "gp64", "gp65",
+				"gp66";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu2_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 5) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <17 3>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C2E2", "PLUG_DETECT_DIMM_C2E1",
+			"PLUG_DETECT_DIMM_C2F2", "PLUG_DETECT_DIMM_C2F1",
+			"PLUG_DETECT_DIMM_C2G2", "PLUG_DETECT_DIMM_C2G1",
+			"PLUG_DETECT_DIMM_C2H2", "PLUG_DETECT_DIMM_C2H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C2D1", "PLUG_DETECT_DIMM_C2D2",
+			"PLUG_DETECT_DIMM_C2C1", "PLUG_DETECT_DIMM_C2C2",
+			"PLUG_DETECT_DIMM_C2B1", "PLUG_DETECT_DIMM_C2B2",
+			"PLUG_DETECT_DIMM_C2A1", "PLUG_DETECT_DIMM_C2A2",
+			/* GPORT2 */
+			"PEX_CPU2_EVENT_RST", "",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C2E2", "LED_ID_DIMM_C2E1",
+			"LED_ID_DIMM_C2F2", "LED_ID_DIMM_C2F1",
+			"LED_ID_DIMM_C2G2", "LED_ID_DIMM_C2G1",
+			"LED_ID_DIMM_C2H2", "LED_ID_DIMM_C2H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C2A2", "LED_ID_DIMM_C2A1",
+			"LED_ID_DIMM_C2B2", "LED_ID_DIMM_C2B1",
+			"LED_ID_DIMM_C2C2", "LED_ID_DIMM_C2C1",
+			"LED_ID_DIMM_C2D2", "LED_ID_DIMM_C2D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU2_SKTOCC_N", "LED_ID_CPU2";
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		smb_svc_pex_cpu3_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 3) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <17 3>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C3E2", "PLUG_DETECT_DIMM_C3E1",
+			"PLUG_DETECT_DIMM_C3F2", "PLUG_DETECT_DIMM_C3F1",
+			"PLUG_DETECT_DIMM_C3G2", "PLUG_DETECT_DIMM_C3G1",
+			"PLUG_DETECT_DIMM_C3H2", "PLUG_DETECT_DIMM_C3H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C3D1", "PLUG_DETECT_DIMM_C3D2",
+			"PLUG_DETECT_DIMM_C3C1", "PLUG_DETECT_DIMM_C3C2",
+			"PLUG_DETECT_DIMM_C3B1", "PLUG_DETECT_DIMM_C3B2",
+			"PLUG_DETECT_DIMM_C3A1", "PLUG_DETECT_DIMM_C3A2",
+			/* GPORT2 */
+			"PEX_CPU3_EVENT_RST", "",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C3E2", "LED_ID_DIMM_C3E1",
+			"LED_ID_DIMM_C3F2", "LED_ID_DIMM_C3F1",
+			"LED_ID_DIMM_C3G2", "LED_ID_DIMM_C3G1",
+			"LED_ID_DIMM_C3H2", "LED_ID_DIMM_C3H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C3A2", "LED_ID_DIMM_C3A1",
+			"LED_ID_DIMM_C3B2", "LED_ID_DIMM_C3B1",
+			"LED_ID_DIMM_C3C2", "LED_ID_DIMM_C3C1",
+			"LED_ID_DIMM_C3D2", "LED_ID_DIMM_C3D1",
+			/* GPORT5 */
+			"LED_PWR_DWR_FRNT", "LED_ID_DWR_FRNT_P",
+			"FM_CPU3_SKTOCC_N", "LED_ID_CPU3";
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu0_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(O, 3) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <18 2>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C0E2", "PLUG_DETECT_DIMM_C0E1",
+			"PLUG_DETECT_DIMM_C0F2", "PLUG_DETECT_DIMM_C0F1",
+			"PLUG_DETECT_DIMM_C0G2", "PLUG_DETECT_DIMM_C0G1",
+			"PLUG_DETECT_DIMM_C0H2", "PLUG_DETECT_DIMM_C0H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C0D1", "PLUG_DETECT_DIMM_C0D2",
+			"PLUG_DETECT_DIMM_C0C1", "PLUG_DETECT_DIMM_C0C2",
+			"PLUG_DETECT_DIMM_C0B1", "PLUG_DETECT_DIMM_C0B2",
+			"PLUG_DETECT_DIMM_C0A1", "PLUG_DETECT_DIMM_C0A2",
+			/* GPORT2 */
+			"PEX_CPU0_EVENT_RST", "SVC_PEX_RSSD01_16_RST",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C0E2", "LED_ID_DIMM_C0E1",
+			"LED_ID_DIMM_C0F2", "LED_ID_DIMM_C0F1",
+			"LED_ID_DIMM_C0G2", "LED_ID_DIMM_C0G1",
+			"LED_ID_DIMM_C0H2", "LED_ID_DIMM_C0H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C0A2", "LED_ID_DIMM_C0A1",
+			"LED_ID_DIMM_C0B2", "LED_ID_DIMM_C0B1",
+			"LED_ID_DIMM_C0C2", "LED_ID_DIMM_C0C1",
+			"LED_ID_DIMM_C0D2", "LED_ID_DIMM_C0D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU0_SKTOCC_N", "LED_ID_CPU0";
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	p1v2_bmc_aux_mon: pmic@60 {
+		compatible = "maxim,max8952";
+		reg = <0x60>;
+		max8952,default-mode = <3>;
+		max8952,dvs-mode-microvolt = <1100000>, <1100000>,
+					     <1100000>, <1100000>;
+		max8952,sync-freq = <0>;
+		max8952,ramp-speed = <0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2cmux8 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan10_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan10_ssb: sw0 {
+					regulator-name = "fan10_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan12_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan12_ssb: sw0 {
+					regulator-name = "fan12_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan14_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan14_ssb: sw0 {
+					regulator-name = "fan14_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan16_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan16_ssb: sw0 {
+					regulator-name = "fan16_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan18_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan18_ssb: sw0 {
+					regulator-name = "fan18_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan20_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan20_ssb: sw0 {
+					regulator-name = "fan20_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan22_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan22_ssb: sw0 {
+					regulator-name = "fan22_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan24_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan24_ssb: sw0 {
+					regulator-name = "fan24_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux7 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan17_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan17_ssb: sw0 {
+					regulator-name = "fan17_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan19_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan19_ssb: sw0 {
+					regulator-name = "fan19_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan21_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan21_ssb: sw0 {
+					regulator-name = "fan21_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan23_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan23_ssb: sw0 {
+					regulator-name = "fan23_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan02_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan02_ssb: sw0 {
+					regulator-name = "fan02_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan04_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan04_ssb: sw0 {
+					regulator-name = "fan04_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan06_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan06_ssb: sw0 {
+					regulator-name = "fan06_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan08_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan08_ssb: sw0 {
+					regulator-name = "fan08_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux6 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan01_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan01_ssb: sw0 {
+					regulator-name = "fan01_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan03_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan03_ssb: sw0 {
+					regulator-name = "fan03_supply";
+
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan05_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan05_ssb: sw0 {
+					regulator-name = "fan05_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan07_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan07_ssb: sw0 {
+					regulator-name = "fan07_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan09_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan09_ssb: sw0 {
+					regulator-name = "fan09_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan11_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan11_ssb: sw0 {
+					regulator-name = "fan11_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan13_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan13_ssb: sw0 {
+					regulator-name = "fan13_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan15_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan15_ssb: sw0 {
+					regulator-name = "fan15_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+};
+
+&i2cmux9 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd19: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <46 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd19:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd19: sw0 {
+					regulator-name = "rssd19_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd19: sw1 {
+					regulator-name = "rssd19_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd18: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd18:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd18: sw0 {
+					regulator-name = "rssd18_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd18: sw1 {
+					regulator-name = "rssd18_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd17: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd17:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd17: sw0 {
+					regulator-name = "rssd17_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd17: sw1 {
+					regulator-name = "rssd17_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd20: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <47 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd20:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd20: sw0 {
+					regulator-name = "rssd20_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd20: sw1 {
+					regulator-name = "rssd20_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd21: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <48 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd21:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd21: sw0 {
+					regulator-name = "rssd21_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd21: sw1 {
+					regulator-name = "rssd21_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd22: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <49 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd22:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd22: sw0 {
+					regulator-name = "rssd22_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd22: sw1 {
+					regulator-name = "rssd22_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd24: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd24:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd24: sw0 {
+					regulator-name = "rssd24_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd24: sw1 {
+					regulator-name = "rssd24_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd23: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <50 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd23:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd23: sw0 {
+					regulator-name = "rssd23_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd23: sw1 {
+					regulator-name = "rssd23_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux10 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd25: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <52 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd25:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd25: sw0 {
+					regulator-name = "rssd25_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd25: sw1 {
+					regulator-name = "rssd25_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd26: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <53 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd26:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd26: sw0 {
+					regulator-name = "rssd26_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd26: sw1 {
+					regulator-name = "rssd26_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd27: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <54 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd27:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd27: sw0 {
+					regulator-name = "rssd27_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd27: sw1 {
+					regulator-name = "rssd27_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd32: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd32:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd32: sw0 {
+					regulator-name = "rssd32_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd32: sw1 {
+					regulator-name = "rssd32_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd31: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <58 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd31:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd31: sw0 {
+					regulator-name = "rssd31_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd31: sw1 {
+					regulator-name = "rssd31_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd30: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <57 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd30:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd30: sw0 {
+					regulator-name = "rssd30_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd30: sw1 {
+					regulator-name = "rssd30_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd29: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd29:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd29: sw0 {
+					regulator-name = "rssd29_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd29: sw1 {
+					regulator-name = "rssd29_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd28: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd28:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd28: sw0 {
+					regulator-name = "rssd28_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd28: sw1 {
+					regulator-name = "rssd28_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux18 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd03: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <46 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd03:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd03: sw0 {
+					regulator-name = "rssd03_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd03: sw1 {
+					regulator-name = "rssd03_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd02: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd02:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd02: sw0 {
+					regulator-name = "rssd02_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd02: sw1 {
+					regulator-name = "rssd02_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd01: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd01:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd01: sw0 {
+					regulator-name = "rssd01_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd01: sw1 {
+					regulator-name = "rssd01_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd04: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <47 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd04:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd04: sw0 {
+					regulator-name = "rssd04_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd04: sw1 {
+					regulator-name = "rssd04_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd05: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <48 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd05:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd05: sw0 {
+					regulator-name = "rssd05_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd05: sw1 {
+					regulator-name = "rssd05_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd08: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd08:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd08: sw0 {
+					regulator-name = "rssd08_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd08: sw1 {
+					regulator-name = "rssd08_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd07: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <50 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd07:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd07: sw0 {
+					regulator-name = "rssd07_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd07: sw1 {
+					regulator-name = "rssd07_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd06: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <49 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd06:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd06: sw0 {
+					regulator-name = "rssd06_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd06: sw1 {
+					regulator-name = "rssd06_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux19 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd14: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <57 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd14:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd14: sw0 {
+					regulator-name = "rssd14_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd14: sw1 {
+					regulator-name = "rssd14_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd13: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd13:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd13: sw0 {
+					regulator-name = "rssd13_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd13: sw1 {
+					regulator-name = "rssd13_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd12: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd12:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd12: sw0 {
+					regulator-name = "rssd12_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd12: sw1 {
+					regulator-name = "rssd12_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd11: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <54 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd11:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd11: sw0 {
+					regulator-name = "rssd11_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd11: sw1 {
+					regulator-name = "rssd11_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd10: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <53 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd10:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd10: sw0 {
+					regulator-name = "rssd10_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd10: sw1 {
+					regulator-name = "rssd10_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd09: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <52 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd09:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd09: sw0 {
+					regulator-name = "rssd09_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd09: sw1 {
+					regulator-name = "rssd09_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd15: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <58 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd15:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd15: sw0 {
+					regulator-name = "rssd15_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd15: sw1 {
+					regulator-name = "rssd15_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd16: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd16:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd16: sw0 {
+					regulator-name = "rssd16_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd16: sw1 {
+					regulator-name = "rssd16_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
new file mode 100644
index 000000000000..c8267c97a44e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -0,0 +1,1671 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "System1";
+	compatible = "ibm,system1-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c16 = &i2c8mux1chn0;
+		i2c17 = &i2c8mux1chn1;
+		i2c18 = &i2c8mux1chn2;
+		i2c19 = &i2c8mux1chn3;
+		i2c20 = &i2c8mux1chn4;
+		i2c21 = &i2c8mux1chn5;
+		i2c22 = &i2c8mux1chn6;
+		i2c23 = &i2c8mux1chn7;
+		i2c24 = &i2c3mux0chn0;
+		i2c25 = &i2c3mux0chn1;
+		i2c26 = &i2c3mux0chn2;
+		i2c27 = &i2c3mux0chn3;
+		i2c28 = &i2c3mux0chn4;
+		i2c29 = &i2c3mux0chn5;
+		i2c30 = &i2c3mux0chn6;
+		i2c31 = &i2c3mux0chn7;
+		i2c32 = &i2c6mux0chn0;
+		i2c33 = &i2c6mux0chn1;
+		i2c34 = &i2c6mux0chn2;
+		i2c35 = &i2c6mux0chn3;
+		i2c36 = &i2c6mux0chn4;
+		i2c37 = &i2c6mux0chn5;
+		i2c38 = &i2c6mux0chn6;
+		i2c39 = &i2c6mux0chn7;
+		i2c40 = &i2c7mux0chn0;
+		i2c41 = &i2c7mux0chn1;
+		i2c42 = &i2c7mux0chn2;
+		i2c43 = &i2c7mux0chn3;
+		i2c44 = &i2c7mux0chn4;
+		i2c45 = &i2c7mux0chn5;
+		i2c46 = &i2c7mux0chn6;
+		i2c47 = &i2c7mux0chn7;
+		i2c48 = &i2c8mux0chn0;
+		i2c49 = &i2c8mux0chn1;
+		i2c50 = &i2c8mux0chn2;
+		i2c51 = &i2c8mux0chn3;
+		i2c52 = &i2c8mux0chn4;
+		i2c53 = &i2c8mux0chn5;
+		i2c54 = &i2c8mux0chn6;
+		i2c55 = &i2c8mux0chn7;
+		i2c56 = &i2c14mux0chn0;
+		i2c57 = &i2c14mux0chn1;
+		i2c58 = &i2c14mux0chn2;
+		i2c59 = &i2c14mux0chn3;
+		i2c60 = &i2c14mux0chn4;
+		i2c61 = &i2c14mux0chn5;
+		i2c62 = &i2c14mux0chn6;
+		i2c63 = &i2c14mux0chn7;
+		i2c64 = &i2c15mux0chn0;
+		i2c65 = &i2c15mux0chn1;
+		i2c66 = &i2c15mux0chn2;
+		i2c67 = &i2c15mux0chn3;
+		i2c68 = &i2c15mux0chn4;
+		i2c69 = &i2c15mux0chn5;
+		i2c70 = &i2c15mux0chn6;
+		i2c71 = &i2c15mux0chn7;
+	};
+
+	chosen {
+		stdout-path = "uart5:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		eventlog: tcg-event-log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bmc-hb {
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fan0-fault {
+			gpios = <&pca3 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan1-fault {
+			gpios = <&pca3 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan2-fault {
+			gpios = <&pca3 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan3-fault {
+			gpios = <&pca3 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan4-fault {
+			gpios = <&pca3 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan5-fault {
+			gpios = <&pca3 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan6-fault {
+			gpios = <&pca3 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-nvmed0-fault {
+			gpios = <&pca4 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-nvmed1-fault {
+			gpios = <&pca4 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-nvmed2-fault {
+			gpios = <&pca4 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-nvmed3-fault {
+			gpios = <&pca4 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-nvme0-presence {
+			label = "nvme0-presence";
+			gpios = <&pca4 0 GPIO_ACTIVE_LOW>;
+			linux,code = <0>;
+		};
+
+		event-nvme1-presence {
+			label = "nvme1-presence";
+			gpios = <&pca4 1 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		event-nvme2-presence {
+			label = "nvme2-presence";
+			gpios = <&pca4 2 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		event-nvme3-presence {
+			label = "nvme3-presence";
+			gpios = <&pca4 3 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>,
+			<&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>,
+			<&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>,
+			<&adc1 4>, <&adc0 2>, <&adc1 0>,
+			<&p2v5_aux_vd 0>, <&adc1 7>;
+	};
+
+	p12v_vd: voltage-divider1 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1127/127 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <15>;
+		full-ohms = <133>;
+	};
+
+	p5v_aux_vd: voltage-divider2 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 5>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p5v_bmc_aux_vd: voltage-divider3 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p3v3_aux_vd: voltage-divider4 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 2>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p3v3_bmc_aux_vd: voltage-divider5 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p1v8_bmc_aux_vd: voltage-divider6 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 6>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 4000/3000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <3>;
+		full-ohms = <4>;
+	};
+
+	p2v5_aux_vd: voltage-divider7 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 1>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 2100/1100 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <11>;
+		full-ohms = <21>;
+	};
+
+	p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+	aspeed,battery-sensing;
+
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_gpiol4_unbiased: gpiol4 {
+		pins = "C15";
+		bias-disable;
+	};
+
+	pinctrl_gpiol5_unbiased: gpiol5 {
+		pins = "F15";
+		bias-disable;
+	};
+
+	pinctrl_gpiol6_unbiased: gpiol6 {
+		pins = "B14";
+		bias-disable;
+	};
+
+	pinctrl_gpiol7_unbiased: gpiol7 {
+		pins = "C14";
+		bias-disable;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiol4_unbiased
+		&pinctrl_gpiol5_unbiased
+		&pinctrl_gpiol6_unbiased
+		&pinctrl_gpiol7_unbiased>;
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","bmc-tpm-reset","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","led-bmc-ready",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"pch-reset","","","","","flash-write-override","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","pch-ready","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","led-rear-enc-fault0","led-rear-enc-id0",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","rtc-battery-voltage-read-enable","","power-chassis-control","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"fpga-pgood","power-chassis-good","pch-pgood","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	pin-gpio-hog-0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "RST_RTCRST_N";
+	};
+
+	pin-gpio-hog-1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "RST_SRTCRST_N";
+	};
+
+	pin-gpio-hog-2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FAN_E3_SVC_PEX_INT_N";
+	};
+
+	pin-gpio-hog-3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 6) GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "isolate_errs_cpu1";
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <500000>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	regulator@42 {
+		compatible = "infineon,ir38263";
+		reg = <0x42>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nic1-perst";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "bmc-perst";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "reset-M2-SSD1-2-perst";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcie-perst1";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcie-perst2";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcie-perst3";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcie-perst4";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcie-perst5";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcie-perst6";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcie-perst7";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcie-perst8";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "PV-cp0-sw1stk4-perst";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "PV-cp0-sw1stk5-perst";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "pe-cp-drv0-perst";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pe-cp-drv1-perst";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "lom-perst";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PLUG_DETECT_PCIE_J101_N",
+			"PLUG_DETECT_PCIE_J102_N",
+			"PLUG_DETECT_PCIE_J103_N",
+			"PLUG_DETECT_PCIE_J104_N",
+			"PLUG_DETECT_PCIE_J105_N",
+			"PLUG_DETECT_PCIE_J106_N",
+			"PLUG_DETECT_PCIE_J107_N",
+			"PLUG_DETECT_PCIE_J108_N",
+			"PLUG_DETECT_M2_SSD1_N",
+			"PLUG_DETECT_NIC1_N",
+			"SEL_SMB_DIMM_CPU0",
+			"presence-ps2",
+			"presence-ps3",
+			"", "",
+			"PWRBRD_PLUG_DETECT2_N";
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "intel,crps185";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "intel,crps185";
+		reg = <0x59>;
+	};
+
+	power-supply@5a {
+		compatible = "intel,crps185";
+		reg = <0x5a>;
+	};
+
+	power-supply@5b {
+		compatible = "intel,crps185";
+		reg = <0x5b>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c3mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c3mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c3mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c3mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c3mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c3mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c3mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c3mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	regulator@42 {
+		compatible = "infineon,ir38263";
+		reg = <0x42>;
+	};
+
+	regulator@43 {
+		compatible = "infineon,ir38060";
+		reg = <0x43>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	fan-controller@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+	};
+
+	fan-controller@54 {
+		compatible = "maxim,max31785a";
+		reg = <0x54>;
+	};
+
+	eeprom@55 {
+		compatible = "atmel,24c64";
+		reg = <0x55>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c6mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			humidity-sensor@40 {
+				compatible = "ti,hdc1080";
+				reg = <0x40>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp275";
+				reg = <0x48>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "enclosure-id-led";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "attention-led";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "enclosure-fault-rollup-led";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "power-on-led";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			temperature-sensor@76 {
+				compatible = "infineon,dps310";
+				reg = <0x76>;
+			};
+		};
+
+		i2c6mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c6mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c6mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+
+	pca3: gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca4: gpio@77 {
+		compatible = "nxp,pca9539";
+		reg = <0x77>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PE_NVMED0_EXP_PRSNT_N",
+			"PE_NVMED1_EXP_PRSNT_N",
+			"PE_NVMED2_EXP_PRSNT_N",
+			"PE_NVMED3_EXP_PRSNT_N",
+			"LED_FAULT_NVMED0",
+			"LED_FAULT_NVMED1",
+			"LED_FAULT_NVMED2",
+			"LED_FAULT_NVMED3",
+			"FAN0_PRESENCE_R_N",
+			"FAN1_PRESENCE_R_N",
+			"FAN2_PRESENCE_R_N",
+			"FAN3_PRESENCE_R_N",
+			"FAN4_PRESENCE_R_N",
+			"FAN5_PRESENCE_N",
+			"FAN6_PRESENCE_N",
+			"";
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c7mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c7mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c7mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c7mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			regulator@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+			};
+		};
+
+		i2c7mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c7mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+		};
+
+		i2c7mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c7mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c8mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+
+			regulator@41 {
+				compatible = "infineon,tda38640";
+				reg = <0x41>;
+			};
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+
+			regulator@5b {
+				compatible = "mps,mp2971";
+				reg = <0x5b>;
+			};
+		};
+
+		i2c8mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c8mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c8mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c8mux1chn0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c8mux1chn1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c8mux1chn2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c8mux1chn3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				i2c8mux1chn4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				i2c8mux1chn5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				i2c8mux1chn6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				i2c8mux1chn7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		i2c8mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c8mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp432";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c8mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			regulator@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	regulator@40 {
+		compatible = "infineon,ir38263";
+		reg = <0x40>;
+	};
+
+	regulator@41 {
+		compatible = "infineon,ir38263";
+		reg = <0x41>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&eventlog>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+
+	regulator@41 {
+		compatible = "infineon,ir38263";
+		reg = <0x41>;
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "efuse-12v-slots";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "efuse-3p3v-slot";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nic2-pert";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcie-perst9";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcie-perst10";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcie-perst11";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcie-perst12";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcie-perst13";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcie-perst14";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcie-perst15";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcie-perst16";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "PV-cp1-sw1stk4-perst";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "PV-cp1-sw1stk5-perst";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pe-cp-drv2-perst";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "pe-cp-drv3-perst";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	gpio@75 {
+		compatible = "nxp,pca9539";
+		reg = <0x75>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PLUG_DETECT_PCIE_J109_N",
+			"PLUG_DETECT_PCIE_J110_N",
+			"PLUG_DETECT_PCIE_J111_N",
+			"PLUG_DETECT_PCIE_J112_N",
+			"PLUG_DETECT_PCIE_J113_N",
+			"PLUG_DETECT_PCIE_J114_N",
+			"PLUG_DETECT_PCIE_J115_N",
+			"PLUG_DETECT_PCIE_J116_N",
+			"PLUG_DETECT_M2_SSD2_N",
+			"PLUG_DETECT_NIC2_N",
+			"SEL_SMB_DIMM_CPU1",
+			"presence-ps0",
+			"presence-ps1",
+			"", "",
+			"PWRBRD_PLUG_DETECT1_N";
+	};
+
+	gpio@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SW1_BOOTRCVRYB1_N",
+			"SW1_BOOTRCVRYB0_N",
+			"SW2_BOOTRCVRYB1_N",
+			"SW2_BOOTRCVRYB0_N",
+			"SW3_4_BOOTRCVRYB1_N",
+			"SW3_4_BOOTRCVRYB0_N",
+			"SW5_BOOTRCVRYB1_N",
+			"SW5_BOOTRCVRYB0_N",
+			"SW6_BOOTRCVRYB1_N",
+			"SW6_BOOTRCVRYB0_N",
+			"SW1_RESET_N",
+			"SW3_RESET_N",
+			"SW4_RESET_N",
+			"SW2_RESET_N",
+			"SW5_RESET_N",
+			"SW6_RESET_N";
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c14mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			regulator@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+			};
+		};
+
+		i2c14mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c14mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+		};
+
+		i2c14mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c14mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+
+			regulator@41 {
+				compatible = "infineon,tda38640";
+				reg = <0x41>;
+			};
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+
+			regulator@5b {
+				compatible = "mps,mp2971";
+				reg = <0x5b>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c15mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c15mux1chn0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c15mux1chn1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c15mux1chn2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c15mux1chn3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				i2c15mux1chn4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				i2c15mux1chn5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				i2c15mux1chn6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				i2c15mux1chn7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		i2c15mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c15mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp432";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c15mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			regulator@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+			};
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp432";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
new file mode 100644
index 000000000000..79c6919b3570
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
@@ -0,0 +1,907 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "FP5280G2 BMC";
+	compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(B, 3)>;
+		};
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 0)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan6-presence {
+			label = "fan6-presence";
+			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-fan7-presence {
+			label = "fan7-presence";
+			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "power";
+			/* TODO: dummy gpio */
+			gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		init-ok {
+			label = "init-ok";
+			gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		front-memory {
+			label = "front-memory";
+			gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		front-syshot {
+			label = "front-syshot";
+			gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		front-syshealth {
+			label = "front-syshealth";
+			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		front-fan {
+			label = "front-fan";
+			gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		front-psu {
+			label = "front-psu";
+			gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			label = "identify";
+			gpios = <&gpio ASPEED_GPIO(Z, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","front-psu","checkstop","cfam-reset","","","init-ok",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"ps0-presence","ps1-presence","","","front-memory","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","front-fan","","","",
+	/*I0-I7*/	"front-syshealth","front-syshot","mux-gpios","enable-gpios","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","power","trans-gpios","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","identify",
+	/*AA0-AA7*/	"clock-gpios","","data-gpios","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* Test Point */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* APSS */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	/* LCD */
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		label = "fru";
+	};
+
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+		label = "inlet";
+	};
+
+	tmp112@49 {
+		compatible = "ti,tmp112";
+		reg = <0x49>;
+		label = "outlet";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "psu_inlet";
+			};
+
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "ocp_zone";
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "bmc_zone";
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			tmp112@7c {
+				compatible = "microchip,emc1413";
+				reg = <0x7c>;
+			};
+		};
+
+	};
+};
+
+&i2c3 {
+	/* Riser Card */
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds3232";
+		reg = <0x68>;
+	};
+};
+
+&i2c5 {
+	/* vr  */
+	status = "okay";
+};
+
+&i2c6 {
+	/* bp card */
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adm1278@10 {
+				compatible = "adi,adm1278";
+				reg = <0x10>;
+			};
+
+			adm1278@13 {
+				compatible = "adi,adm1278";
+				reg = <0x13>;
+			};
+
+			adm1278@50 {
+				compatible = "adi,adm1278";
+				reg = <0x50>;
+			};
+
+			adm1278@53 {
+				compatible = "adi,adm1278";
+				reg = <0x53>;
+			};
+
+		};
+
+		/*pcie riser*/
+
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca0: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+	};
+
+	pca1: pca9555@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca2: pca9555@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca3: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca4: pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca5: pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+};
+
+&i2c9 {
+	/* cpld */
+	status = "okay";
+};
+
+&i2c10 {
+	/* hdd bp */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "inspur,ipsps1";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "inspur,ipsps1";
+		reg = <0x59>;
+	};
+};
+
+&i2c12 {
+	/* odcc */
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&ibt {
+	status = "okay";
+
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+	 &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
+	 &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
+	 &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
+	 &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
+	 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default &pinctrl_pwm5_default
+		&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+	};
+
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts
new file mode 100644
index 000000000000..92b9b3987c92
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "NF5280M6 BMC";
+	compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+	    compatible = "gpio-leds";
+
+		bmc_alive {
+			label = "bmc_alive";
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+			led-pattern = <1000 1000>;
+		};
+
+		front-fan {
+			label = "front-fan";
+			gpios = <&gpio ASPEED_GPIO(F,2) GPIO_ACTIVE_LOW>;
+		};
+
+	    front-psu {
+			label = "front-psu";
+			gpios = <&gpio ASPEED_GPIO(F,3) GPIO_ACTIVE_LOW>;
+		};
+
+	    front-syshot {
+			label = "front-syshot";
+			gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		front-memory {
+			label = "front-memory";
+			gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			label = "identify";
+			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		<&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&gpio {
+	status = "okay";
+	/* Enable GPIOE0 and GPIOE2 pass-through by default */
+	pinctrl-names = "pass-through";
+	pinctrl-0 = <&pinctrl_gpie0_default
+			&pinctrl_gpie2_default>;
+	gpio-line-names =
+	/*A0-A7*/	"","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","",
+	/*B0-B7*/	"BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N",
+				"FM_CPU_MSMI_CATERR_LVT3_BMC_N","","FM_CPU0_PROCHOT_LVT3_N",
+				"FM_CPU_MEM_THERMTRIP_LVT3_N","BIOS_LOAD_DEFAULT_R_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2",
+				"BMC_SD2DAT3","BMC_SD2DET","BMC_SD2WPT",
+	/*E0-E7*/	"FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3",
+				"FM_BOARD_ID4","FM_BOARD_ID5","","",
+	/*F0-F7*/	"PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N",
+				"BIOS_DEBUG_MODE_N","FP_LCD_RESET","FAN_TYPE_SEL",
+				"RST_GLB_RST_WARN_N",
+	/*G0-G7*/	"IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC",
+				"BMC_JTAG_TCK_MUX_SEL","BMC_BIOS_RESERVED","SYS_NMI_N","BMC_NMI_N",
+	/*H0-H7*/	"JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6",
+				"FM_SKU_ID0","IRQ_SML1_PMBUS_ALERT_N","IRQ_SML0_ALERT_MUX_N",
+	/*I0-I7*/	"FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N",
+				"FM_SYS_THROTTLE_LVC3","SPI2_PCH_CS0_N","","","",
+	/*J0-J7*/	"FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N",
+				"VGA_HSYNC","VGA_VSYNC","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","SYS_UART_TXD1","SYS_UART_RXD1",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N",
+	/*R0-R7*/	"SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N",
+				"DBP_CPU_PREQ_N","FM_CPU_ERR2_LVT3_BMC_N",
+				"RISER_NCSI_EN_N","","LOM_NCSI_EN_N","OCP_NCSI_EN_N",
+	/*S0-S7*/	"BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","",
+				"GPIOS5_BMC","","GPIOS7_BMC",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","",
+				"GPIOZ5","","",
+	/*AA0-AA7*/	"FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC",
+				"FM_SLPS4_R_N","","POWER_BUTTON","POWER_OUT",
+	/*AB0-AB7*/	"RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&i2c0 {
+	/* FP_LCD */
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		label = "fru";
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+		label = "inlet";
+	};
+
+	tmp112@49 {
+		compatible = "ti,tmp112";
+		reg = <0x49>;
+		label = "outlet";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+	};
+};
+
+&i2c4 {
+	/* IPMB */
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	adm1278@33 {
+		compatible = "adi,adm1293";
+		reg = <0x33>;
+	};
+
+	adm1278@32 {
+		compatible = "adi,adm1293";
+		reg = <0x32>;
+	};
+
+	adm1278@20 {
+		compatible = "adi,adm1293";
+		reg = <0x20>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca0: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca1: pca9555@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca2: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca3: pca9555@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c9 {
+	/* cpld */
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+
+	pca4: pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca5: pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "inspur,ipsps1";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "inspur,ipsps1";
+		reg = <0x59>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default &pinctrl_pwm5_default
+		&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+	};
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&kcs4 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca4>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+	 &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
+	 &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
+	 &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
+	 &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
+	 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vuart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts
new file mode 100644
index 000000000000..7a78c34cff40
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "ON5263M5 BMC";
+	compatible = "inspur,on5263m5-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "earlycon";
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>;
+		};
+	};
+
+	leds {
+	    compatible = "gpio-leds";
+	    bmc_alive {
+		label = "bmc_alive";
+		gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+		linux,default-trigger = "timer";
+	    };
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	adm1278@11 {
+		  compatible = "adi,adm1278";
+		  reg = <0x11>;
+	};
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+};
+
+&adc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts
new file mode 100644
index 000000000000..da55e7b29fac
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 Intel Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	model = "S2600WF BMC";
+	compatible = "intel,s2600wf-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts
new file mode 100644
index 000000000000..ec82af94e1fb
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 Inventec Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "STARSCREAM BMC";
+	compatible = "inventec,starscream-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-uid {
+			label = "UID_LED";
+			gpios = <&gpio0 186 GPIO_ACTIVE_LOW>;
+		};
+
+		led-heartbeat {
+			label = "HB_LED";
+			gpios = <&gpio0 127 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc2";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+&i2c1 {
+	status = "okay";
+};
+&i2c2 {
+	status = "okay";
+};
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	// I2C EXPANDER
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// AMD SB-TSI CPU1
+			sbtsi@4c {
+				compatible = "amd,sbtsi";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			// AMD SB-TSI CPU2
+			sbtsi@48 {
+				compatible = "amd,sbtsi";
+				reg = <0x48>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	// I2C EXPANDER U153
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		usb_hub: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		riser1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		riser2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	// Motherboard Temp_U89
+	temperature-sensor@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+
+	// RunBMC Temp_U6
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	// I2C EXPANDER U40
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	// FRU RunBMC
+	eeprom@51 {
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+		pagesize = <128>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+	// FRU SCM
+	eeprom@51 {
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+		pagesize = <128>;
+	};
+
+	// SCM Temp_U17
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/   "","","","","","","","",
+	/*B0-B7*/   "alert-psu0-smb-r-n","bmc-ready","","assert-cpu0-prochot-r-n",
+	"","","","",
+	/*C0-C7*/   "","","","","","","","",
+	/*D0-D7*/   "","","","","","","","",
+	/*E0-E7*/   "","","","","","","","",
+	/*F0-F7*/   "","","","","reset-sgpio-r-n","","","",
+	/*G0-G7*/   "","","scm-jtag-mux-select","","","","","",
+	/*H0-H7*/   "","","","","reset-out","power-out","","",
+	/*I0-I7*/   "","","","","","","irq-bmc-cpu0-buf-nmi-n","",
+	/*J0-J7*/   "","","","","","","","",
+	/*K0-K7*/   "","","","","","","","",
+	/*L0-L7*/   "","","","","","","","",
+	/*M0-M7*/   "","","","","","","","",
+	/*N0-N7*/   "","","ncsi-ocp-clk-en-n","","","","","",
+	/*O0-O7*/   "","","","","","","cpu1-thermal-trip-n","",
+	/*P0-P7*/   "","","","","","","","",
+	/*Q0-Q7*/   "cpu0-prochot-n","","cpu1-prochot-n","","cpu0-pe-rst0","","","",
+	/*R0-R7*/   "","","","","","","","",
+	/*S0-S7*/   "","","","",
+	"","PCH_SLP_S4_BMC_N","cpu0-thermtrip-n","alert-psu1-smb-r-n",
+	/*T0-T7*/   "","","","","","","","",
+	/*U0-U7*/   "","","","","","","","",
+	/*V0-V7*/   "bios-recovery-buf-n","","assert-cpu1-prochot-r-n","",
+	"power-chassis-good","","","",
+	/*W0-W7*/   "","","","","","","","",
+	/*X0-X7*/   "","","","","platform-type","","","",
+	/*Y0-Y7*/   "","","","","","","","",
+	/*Z0-Z7*/   "","cpld-power-break-n","","","","","","",
+	/*AA0-AA7*/ "","","","","","","","",
+	/*AB0-AB7*/ "","","","","","","","",
+	/*AC0-AC7*/ "","","","","","","","";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <64>;
+	bus-frequency = <1000000>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+	non-removable;
+	max-frequency = <52000000>;
+	bus-width = <8>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+	aspeed,vhub-downstream-ports = <7>;
+	aspeed,vhub-generic-endpoints = <21>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb2ad_default>;
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
new file mode 100644
index 000000000000..c713cb7a6187
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 Inventec Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+       model = "TRANSFORMERS BMC";
+       compatible = "inventec,transformer-bmc", "aspeed,ast2600";
+
+       aliases {
+               serial4 = &uart5;
+       };
+
+       chosen {
+               stdout-path = &uart5;
+               bootargs = "console=ttyS4,115200n8";
+       };
+
+       memory@80000000 {
+               device_type = "memory";
+               reg = <0x80000000 0x80000000>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               // UID led
+               uid {
+                       label = "UID_LED";
+                       gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+               };
+
+               // Heart beat led
+               heartbeat {
+                       label = "HB_LED";
+                       gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       ethphy0: ethernet-phy@0 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <1>;
+       };
+};
+
+&mac3 {
+       status = "okay";
+       phy-mode = "rgmii";
+       phy-handle = <&ethphy0>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&fmc {
+       status = "okay";
+
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+#include "openbmc-flash-layout.dtsi"
+       };
+
+       flash@1 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc2";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+       };
+};
+
+&spi1 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_spi1_default>;
+
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bios";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <1>;
+               spi-rx-bus-width = <1>;
+       };
+};
+
+&wdt1 {
+       status = "okay";
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&uart5 {
+       status = "okay";
+};
+
+&i2c0 {
+       status = "okay";
+
+       //Set bmc' slave address;
+       bmc_slave@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c2 {
+       status = "okay";
+};
+
+&i2c3 {
+       // FRU AT24C512C-SSHM-T
+       status = "okay";
+       eeprom@50 {
+               compatible = "atmel,24c512";
+               reg = <0x50>;
+               pagesize = <128>;
+       };
+};
+
+&i2c5 {
+       status = "okay";
+};
+
+&i2c6 {
+       status = "okay";
+
+       tmp75@49 {
+               compatible = "ti,tmp75";
+               reg = <0x49>;
+       };
+
+       tmp75@4f {
+               compatible = "ti,tmp75";
+               reg = <0x4f>;
+       };
+
+       tmp468@48 {
+               compatible = "ti,tmp468";
+               reg = <0x48>;
+       };
+};
+
+&i2c7 {
+       status = "okay";
+       adm1278@40 {
+               compatible = "adi,adm1278";
+               reg = <0x40>;
+       };
+};
+
+
+&i2c8 {
+       // FRU AT24C512C-SSHM-T
+       status = "okay";
+
+       eeprom@51 {
+               compatible = "atmel,24c512";
+               reg = <0x51>;
+               pagesize = <128>;
+       };
+
+       eeprom@53 {
+               compatible = "atmel,24c512";
+               reg = <0x53>;
+               pagesize = <128>;
+       };
+};
+
+&i2c9 {
+       // M.2
+       status = "okay";
+};
+
+&i2c10 {
+       // I2C EXPANDER
+       status = "okay";
+
+       i2c-mux@71 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x71>;
+       };
+
+       i2c-mux@73 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x73>;
+       };
+};
+
+&i2c11 {
+       // I2C EXPANDER
+       status = "okay";
+
+       i2c-mux@70 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x70>;
+
+               pcie_eeprom_riser1: i2c@0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+
+               pcie_eeprom_riser2: i2c@1 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <1>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+
+               pcie_eeprom_riser3: i2c@2 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <2>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+       };
+};
+
+&i2c12 {
+       status = "okay";
+
+       psu0:psu0@58 {
+               compatible = "pmbus";
+               reg = <0x58>;
+       };
+};
+
+&gpio0 {
+       status = "okay";
+       gpio-line-names =
+       /*A0-A7*/   "","","","","","","","",
+       /*B0-B7*/   "presence-ps0","power-chassis-good","","","","","presence-ps1","",
+       /*C0-C7*/   "","","","","","","","",
+       /*D0-D7*/   "","","","","","","","",
+       /*E0-E7*/   "","","","","","","","",
+       /*F0-F7*/   "","","","","power-chassis-control","","","",
+       /*G0-G7*/   "","","jtag-mux","","","","","",
+       /*H0-H7*/   "","","","","reset-button","power-button","","",
+       /*I0-I7*/   "","","","","","","","",
+       /*J0-J7*/   "","","","","","","","",
+       /*K0-K7*/   "","","","","","","","",
+       /*L0-L7*/   "","","","","","","","",
+       /*M0-M7*/   "","","","","","","","",
+       /*N0-N7*/   "","","","","","","","",
+       /*O0-O7*/   "","","","","","","","",
+       /*P0-P7*/   "","","","tck-mux","","","","",
+       /*Q0-Q7*/   "","","","","","","","",
+       /*R0-R7*/   "","","","","","","","",
+       /*S0-S7*/   "","","","","","","","",
+       /*T0-T7*/   "","","","","","","","",
+       /*U0-U7*/   "","nmi-button","","","","","","",
+       /*V0-V7*/   "","","","","power-config-full-load","","","",
+       /*W0-W7*/   "","","","","","","","",
+       /*X0-X7*/   "","","","","","","","",
+       /*Y0-Y7*/   "","","","","","","","",
+       /*Z0-Z7*/   "","","","","","","","",
+       /*AA0-AA7*/ "","","","","","","","",
+       /*AB0-AB7*/ "","","","","","","","",
+       /*AC0-AC7*/ "","","","","","","","";
+};
+
+&lpc_snoop {
+       status = "okay";
+       snoop-ports = <0x80>;
+};
+
+&emmc_controller {
+       status = "okay";
+};
+
+&emmc {
+       status = "okay";
+       non-removable;
+       max-frequency = <52000000>;
+       bus-width = <8>;
+};
+
+&vhub {
+       status = "okay";
+       aspeed,vhub-downstream-ports = <7>;
+       aspeed,vhub-generic-endpoints = <21>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usb2ad_default>;
+};
+
+&rtc {
+       status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
new file mode 100644
index 000000000000..4ad0f44af1ab
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
@@ -0,0 +1,569 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Lenovo Hr630 platform
+ *
+ * Copyright (C) 2019-present Lenovo
+ */
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HR630 BMC";
+	compatible = "lenovo,hr630-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c14 = &i2c_rbp;
+		i2c15 = &i2c_fbp1;
+		i2c16 = &i2c_fbp2;
+		i2c17 = &i2c_fbp3;
+		i2c18 = &i2c_riser2;
+		i2c19 = &i2c_pcie4;
+		i2c20 = &i2c_riser1;
+		i2c21 = &i2c_ocp;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x00100000>; /* 1M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+		<&adc 8>, <&adc 9>, <&adc 10>,
+		<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default
+			&pinctrl_nrts2_default
+			&pinctrl_ndtr2_default
+			&pinctrl_ndsr2_default
+			&pinctrl_ncts2_default
+			&pinctrl_ndcd2_default
+			&pinctrl_nri2_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+			&pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	/* temp1 inlet */
+	tmp75@4e {
+		compatible = "national,lm75";
+		reg = <0x4e>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	/* temp2 outlet */
+	tmp75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	/*	Slot 0,
+	 *	Slot 1,
+	 *	Slot 2,
+	 *	Slot 3
+	 */
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;	/* may use mux@70 next. */
+
+		i2c_rbp: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_fbp1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_fbp2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_fbp3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	/*	Slot 0,
+	 *	Slot 1,
+	 *	Slot 2,
+	 *	Slot 3
+	 */
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;  /* may use mux@76 next. */
+
+		i2c_riser2: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_riser1: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_ocp: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "atmel,24c256";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+};
+
+&gpio {
+
+	pin-gpio-b5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
+	};
+
+	pin-gpio-f0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "IRQ_BMC_PCH_NMI_R";
+	};
+
+	pin-gpio-f3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_BUS0_RST_OUT_N";
+	};
+
+	pin-gpio-f4-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_SKT0_FAULT_LED";
+	};
+
+	pin-gpio-f5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_SKT1_FAULT_LED";
+	};
+
+	pin-gpio-g4-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FAN_PWR_CTL_N";
+	};
+
+	pin-gpio-g7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_BMC_PCIE_I2CMUX_N";
+	};
+
+	pin-gpio-h2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PSU1_FFS_N_R";
+	};
+
+	pin-gpio-h3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PSU2_FFS_N_R";
+	};
+
+	pin-gpio-i3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_INTRUDED_COVER";
+	};
+
+	pin-gpio-j2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_BIOS_UPDATE_N";
+	};
+
+	pin-gpio-j3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_BMC_HDD_I2CMUX_N";
+	};
+
+	pin-gpio-s2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_VGA_SW";
+	};
+
+	pin-gpio-s4-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
+		output;
+		line-name = "VBAT_EN_N";
+	};
+
+	pin-gpio-s6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PU_BMC_GPIOS6";
+	};
+
+	pin-gpio-y0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_NCSI_MUX_CTL_S0";
+	};
+
+	pin-gpio-y1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_NCSI_MUX_CTL_S1";
+	};
+
+	pin-gpio-z0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_RISER2_INT_N";
+	};
+
+	pin-gpio-z2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_RISER2_RESET_N";
+	};
+
+	pin-gpio-z3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_PCH_SCI_LPC_N";
+	};
+
+	pin-gpio-z7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_POST_CMPLT_N";
+	};
+
+	pin-gpio-aa0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "HOST_BMC_USB_SEL";
+	};
+
+	pin-gpio-aa5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_BUS1_RST_OUT_N";
+	};
+
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
new file mode 100644
index 000000000000..fdcf4492fb4e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
@@ -0,0 +1,666 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Lenovo Hr855xg2 platform
+ *
+ * Copyright (C) 2019-present Lenovo
+ */
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HR855XG2 BMC";
+	compatible = "lenovo,hr855xg2-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c14 = &i2c_riser1;
+		i2c15 = &i2c_riser2;
+		i2c16 = &i2c_riser3;
+		i2c17 = &i2c_M2;
+		i2c18 = &channel_0;
+		i2c19 = &channel_1;
+		i2c20 = &channel_2;
+		i2c21 = &channel_3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x00100000>; /* 1M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+		<&adc 8>, <&adc 9>, <&adc 10>,<&adc 11>,
+		<&adc 12>,<&adc 13>,<&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default
+			&pinctrl_nrts2_default
+			&pinctrl_ndtr2_default
+			&pinctrl_ndsr2_default
+			&pinctrl_ncts2_default
+			&pinctrl_ndcd2_default
+			&pinctrl_nri2_default>;
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c_riser1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_riser2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_riser3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_M2: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	bus-frequency = <90000>;
+	HotSwap@10 {
+		compatible = "adi,adm1272";
+		reg = <0x10>;
+	};
+
+	VR@45 {
+		compatible = "pmbus";
+		reg = <0x45>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	/* temp1 */
+	tmp75@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	/* temp2 */
+	tmp75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c256";
+		reg = <0x54>;
+		pagesize = <16>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default
+	&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@14 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@15 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+
+	fan@16 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+};
+
+&gpio {
+
+	pin-gpio-a1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "BMC_EMMC_RST_N";
+	};
+
+	pin-gpio-a3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "PCH_PWROK_BMC_FPGA";
+	};
+
+	pin-gpio-b5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
+	};
+
+	pin-gpio-b7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "CPU_SM_WP";
+	};
+
+	pin-gpio-e0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PDB_PSU_SEL";
+	};
+
+	pin-gpio-e2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LOCATOR_LED_N";
+	};
+
+	pin-gpio-e5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_DBP_PRESENT_R1_N";
+	};
+
+	pin-gpio-e6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_ME_SECURITY_OVERRIDE_N";
+	};
+
+	pin-gpio-f0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "IRQ_BMC_PCH_NMI_R";
+	};
+
+	pin-gpio-f1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "CPU2_PROCDIS_BMC_N";
+	};
+
+	pin-gpio-f2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RM_THROTTLE_EN_N";
+	};
+
+	pin-gpio-f3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_PMBUS_ALERT_B_EN";
+	};
+
+	pin-gpio-f4-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FORCE_NM_THROTTLE_N";
+	};
+
+	pin-gpio-f6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_CPU_PWR_DEBUG_N";
+	};
+
+	pin-gpio-g7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_PCIE_I2C_MUX_RST_N";
+	};
+
+	pin-gpio-h6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_DBP_PRESENT_R2_N";
+	};
+
+	pin-gpio-i3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SPI_BMC_BIOS_WP_N";
+	};
+
+	pin-gpio-j1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_USB_SEL";
+	};
+
+	pin-gpio-j2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PDB_SMB_RST_N";
+	};
+
+	pin-gpio-j3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SPI_BMC_BIOS_HOLD_N";
+	};
+
+	pin-gpio-l0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PDB_FAN_TACH_SEL";
+	};
+
+	pin-gpio-l1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SYS_RESET_BMC_FPGA_N";
+	};
+
+	pin-gpio-l4-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_EFUSE_FAN_G1_EN";
+	};
+
+	pin-gpio-l5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_EFUSE_FAN_G2_EN";
+	};
+
+	pin-gpio-r6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "CPU3_PROCDIS_BMC_N";
+	};
+
+	pin-gpio-r7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "CPU4_PROCDIS_BMC_N";
+	};
+
+	pin-gpio-s1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "DBP_SYSPWROK_BMC";
+	};
+
+	pin-gpio-s2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PCH_RST_RSMRST_N";
+	};
+
+	pin-gpio-s6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_HW_STRAP_5";
+	};
+
+	pin-gpio-z3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_PCH_SCI_LPC_N";
+	};
+
+	pin-gpio-aa0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FW_PSU_ALERT_EN_N";
+	};
+
+	pin-gpio-aa4-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "DBP_CPU_PREQ_N";
+	};
+
+	pin-gpio-ab3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_WDTRST";
+	};
+
+	pin-gpio-ac6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AC, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ESPI_BMC_ALERT_N";
+	};
+
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-microsoft-olympus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-microsoft-olympus.dts
new file mode 100644
index 000000000000..3ef8358ff764
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-microsoft-olympus.dts
@@ -0,0 +1,207 @@
+//SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Olympus BMC";
+	compatible = "microsoft,olympus-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@5f000000 {
+			no-map;
+			reg = <0x5f000000 0x01000000>; /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		bmc_heartbeat {
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power_green {
+			gpios = <&gpio ASPEED_GPIO(U, 2) GPIO_ACTIVE_HIGH>;
+		};
+
+		power_amber {
+			gpios = <&gpio ASPEED_GPIO(U, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 =    <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 =    <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm2_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default
+			&pinctrl_pwm5_default
+			&pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
new file mode 100644
index 000000000000..4de38613b0ea
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
@@ -0,0 +1,1178 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "AST2600 GB200NVL BMC";
+	compatible = "nvidia,gb200nvl-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial2 = &uart3;
+		serial4 = &uart5;
+		i2c16   = &imux16;
+		i2c17   = &imux17;
+		i2c18   = &imux18;
+		i2c19   = &imux19;
+		i2c20   = &imux20;
+		i2c21   = &imux21;
+		i2c22   = &imux22;
+		i2c23   = &imux23;
+		i2c24   = &imux24;
+		i2c25   = &imux25;
+		i2c26   = &imux26;
+		i2c27   = &imux27;
+		i2c28   = &imux28;
+		i2c29   = &imux29;
+		i2c30   = &imux30;
+		i2c31   = &imux31;
+		i2c32   = &imux32;
+		i2c33   = &imux33;
+		i2c34   = &imux34;
+		i2c35   = &imux35;
+		i2c36   = &imux36;
+		i2c37   = &imux37;
+		i2c38   = &imux38;
+		i2c39   = &imux39;
+		i2c40	= &e1si2c0;
+		i2c41	= &e1si2c1;
+		i2c42	= &e1si2c2;
+		i2c43	= &e1si2c3;
+		i2c44	= &e1si2c4;
+		i2c45	= &e1si2c5;
+		i2c46	= &e1si2c6;
+		i2c47	= &e1si2c7;
+		i2c48	= &i2c17mux0;
+		i2c49	= &i2c17mux1;
+		i2c50	= &i2c17mux2;
+		i2c51	= &i2c17mux3;
+		i2c52	= &i2c25mux0;
+		i2c53	= &i2c25mux1;
+		i2c54	= &i2c25mux2;
+		i2c55	= &i2c25mux3;
+		i2c56	= &i2c29mux0;
+		i2c57	= &i2c29mux1;
+		i2c58	= &i2c29mux2;
+		i2c59	= &i2c29mux3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		ramoops@a0000000 {
+			compatible = "ramoops";
+			reg = <0xa0000000 0x100000>; /* 1MB */
+			record-size = <0x10000>; /* 64KB */
+			max-reason = <2>; /* KMSG_DUMP_OOPS */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "uid_led";
+			gpios = <&sgpiom0 27 GPIO_ACTIVE_LOW>;
+		};
+		led-1 {
+			label = "fault_led";
+			gpios = <&sgpiom0 29 GPIO_ACTIVE_LOW>;
+		};
+		led-2 {
+			label = "power_led";
+			gpios = <&sgpiom0 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	buttons {
+		button-power {
+			label = "power-btn";
+			gpio = <&sgpiom0 156 GPIO_ACTIVE_LOW>;
+		};
+		button-uid {
+			label = "uid-btn";
+			gpio = <&sgpiom0 154 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	standby_power_regulator: standby-power-regulator {
+		status = "okay";
+		compatible = "regulator-fixed";
+		regulator-name = "standby_power";
+		gpio = <&gpio0 ASPEED_GPIO(M, 3) GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+// Enable Primary flash on FMC for bring up activity
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		compatible = "jedec,spi-nor";
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot@0 {
+				// 896KB
+				reg = <0x0 0xe0000>;
+				label = "u-boot";
+			};
+
+			kernel@100000 {
+				// 9MB
+				reg = <0x100000 0x900000>;
+				label = "kernel";
+			};
+
+			rofs@a00000 {
+				// 55292KB (extends to end of 64MB SPI - 4KB)
+				reg = <0xa00000 0x35FF000>;
+				label = "rofs";
+			};
+		};
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	// Data SPI is 64MB in size
+	flash@0 {
+		status = "okay";
+		label = "config";
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot-env@0 {
+				// 256KB
+				reg = <0x0 0x40000>;
+				label = "u-boot-env";
+			};
+
+			rwfs@40000 {
+				// 16MB
+				reg = <0x40000 0x1000000>;
+				label = "rwfs";
+			};
+
+			log@1040000 {
+				// 40MB
+				reg = <0x1040000 0x2800000>;
+				label = "log";
+			};
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	// Enabling SOL
+	status = "okay";
+};
+
+&uart5 {
+	// BMC Debug Console
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+	ethphy3: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <2>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+};
+
+/*
+ * Enable USB port A as device (via the virtual hub) to host
+ */
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+// USB 2.0 to HMC, on USB Port B
+&ehci1 {
+	status = "okay";
+};
+
+// USB 1.0
+&uhci {
+	status = "okay";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"RUN_POWER_FAULT_L-I","SYS_RST_IN_L-O",
+		"RUN_POWER_PG-I","PWR_BRAKE_L-O",
+		"SYS_RST_OUT_L-I","RUN_POWER_EN-O",
+		"L0L1_RST_REQ_OUT_L-I","SHDN_FORCE_L-O",
+		"L2_RST_REQ_OUT_L-I","SHDN_REQ_L-O",
+		"SHDN_OK_L-I","UID_LED_N-O",
+		"BMC_I2C1_FPGA_ALERT_L-I","SYS_FAULT_LED_N-O",
+		"BMC_I2C0_FPGA_ALERT_L-I","PWR_LED_N-O",
+		"FPGA_RSVD_FFU3-I","",
+		"FPGA_RSVD_FFU2-I","",
+		"FPGA_RSVD_FFU1-I","",
+		"FPGA_RSVD_FFU0-I","BMC_I2C_SSIF_ALERT_L-O",
+		"CPU_BOOT_DONE-I","JTAG_MUX_SELECT-O",
+		"SPI_BMC_FPGA_INT_L-I","RTC_CLR_L-O",
+		"THERM_BB_WARN_L-I","UART_MUX_SEL-O",
+		"THERM_BB_OVERT_L-I","",
+		"CPU0_UPHY3_PRSNT1_L-I","IOBRD0_RUN_POWER_EN-O",
+		"CPU0_UPHY3_PRSNT0_L-I","IOBRD1_RUN_POWER_EN-O",
+		"CPU0_UPHY2_PRSNT1_L-I","FPGA_RSVD_FFU4-O",
+		"CPU0_UPHY2_PRSNT0_L-I","FPGA_RSVD_FFU5-O",
+		"CPU0_UPHY1_PRSNT1_L-I","FPGA_RSVD_FFU6-O",
+		"CPU0_UPHY1_PRSNT0_L-I","FPGA_RSVD_FFU7-O",
+		"CPU0_UPHY0_PRSNT1_L-I","RSVD_NV_PLT_DETECT-O",
+		"CPU0_UPHY0_PRSNT0_L-I","SPI1_INT_L-O",
+		"CPU1_UPHY3_PRSNT1_L-I","",
+		"CPU1_UPHY3_PRSNT0_L-I","HMC_EROT_MUX_STATUS",
+		"CPU1_UPHY2_PRSNT1_L-I","",
+		"CPU1_UPHY2_PRSNT0_L-I","",
+		"CPU1_UPHY1_PRSNT1_L-I","",
+		"CPU1_UPHY1_PRSNT0_L-I","",
+		"CPU1_UPHY0_PRSNT1_L-I","",
+		"CPU1_UPHY0_PRSNT0_L-I","",
+		"FAN1_PRESENT_L-I","",
+		"FAN0_PRESENT_L-I","",
+		"","",
+		"IPEX_CABLE_PRSNT_L-I","",
+		"M2_1_PRSNT_L-I","",
+		"M2_0_PRSNT_L-I","",
+		"CPU1_UPHY4_PRSNT1_L-I","",
+		"CPU0_UPHY4_PRSNT0_L-I","",
+		"","",
+		"I2C_RTC_ALERT_L-I","",
+		"FAN7_PRESENT_L-I","",
+		"FAN6_PRESENT_L-I","",
+		"FAN5_PRESENT_L-I","",
+		"FAN4_PRESENT_L-I","",
+		"FAN3_PRESENT_L-I","",
+		"FAN2_PRESENT_L-I","",
+		"IOBRD0_IOX_INT_L-I","",
+		"IOBRD1_PRSNT_L-I","",
+		"IOBRD0_PRSNT_L-I","",
+		"IOBRD1_PWR_GOOD-I","",
+		"IOBRD0_PWR_GOOD-I","",
+		"","",
+		"","",
+		"FAN_FAIL_IN_L-I","",
+		"","",
+		"","",
+		"","",
+		"PDB_CABLE_PRESENT_L-I","",
+		"","",
+		"CHASSIS_PWR_BRK_L-I","",
+		"","",
+		"IOBRD1_IOX_INT_L-I","",
+		"10GBE_SMBALRT_L-I","",
+		"PCIE_WAKE_L-I","",
+		"I2C_M21_ALERT_L-I","",
+		"I2C_M20_ALERT_L-I","",
+		"TRAY_FAST_SHDN_L-I","",
+		"UID_BTN_N-I","",
+		"PWR_BTN_L-I","",
+		"PSU_SMB_ALERT_L-I","",
+		"","",
+		"","",
+		"NODE_LOC_ID[0]-I","",
+		"NODE_LOC_ID[1]-I","",
+		"NODE_LOC_ID[2]-I","",
+		"NODE_LOC_ID[3]-I","",
+		"NODE_LOC_ID[4]-I","",
+		"NODE_LOC_ID[5]-I","",
+		"FAN10_PRESENT_L-I","",
+		"FAN9_PRESENT_L-I","",
+		"FAN8_PRESENT_L-I","",
+		"FPGA1_READY_HMC-I","",
+		"DP_HPD-I","",
+		"HMC_I2C3_FPGA_ALERT_L-I","",
+		"HMC_I2C2_FPGA_ALERT_L-I","",
+		"FPGA0_READY_HMC-I","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"LEAK_DETECT_ALERT_L-I","",
+		"MOD1_B2B_CABLE_PRESENT_L-I","",
+		"MOD1_CLINK_CABLE_PRESENT_L-I","",
+		"FAN11_PRESENT_L-I","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"RSVD_SGPIO_IN_CRC[0]","RSVD_SGPIO_O_CRC[7]",
+		"RSVD_SGPIO_IN_CRC[1]","RSVD_SGPIO_O_CRC[6]",
+		"RSVD_SGPIO_IN_CRC[2]","RSVD_SGPIO_O_CRC[5]",
+		"RSVD_SGPIO_IN_CRC[3]","RSVD_SGPIO_O_CRC[4]",
+		"RSVD_SGPIO_IN_CRC[4]","RSVD_SGPIO_O_CRC[3]",
+		"RSVD_SGPIO_IN_CRC[5]","RSVD_SGPIO_O_CRC[2]",
+		"RSVD_SGPIO_IN_CRC[6]","RSVD_SGPIO_O_CRC[1]",
+		"RSVD_SGPIO_IN_CRC[7]","RSVD_SGPIO_O_CRC[0]";
+};
+
+// I2C1, SSIF IPMI interface
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+// I2C2
+// BMC_I2C1_FPGA - Secondary FPGA
+// HMC EROT
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C3
+// BMC_I2C0_FPGA - Primary FPGA
+// HMC FRU EEPROM
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C4
+&i2c3 {
+	status = "okay";
+};
+
+// I2C5
+// RTC Driver
+// IO Expander
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// Module 0, Expander @0x21
+	exp4: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"RTC_MUX_SEL-O",
+			"PCI_MUX_SEL-O",
+			"TPM_MUX_SEL-O",
+			"FAN_MUX-SEL-O",
+			"SGMII_MUX_SEL-O",
+			"DP_MUX_SEL-O",
+			"UPHY3_USB_SEL-O",
+			"NCSI_MUX_SEL-O",
+			"BMC_PHY_RST-O",
+			"RTC_CLR_L-O",
+			"BMC_12V_CTRL-O",
+			"PS_RUN_IO0_PG-I",
+			"",
+			"",
+			"",
+			"";
+	};
+};
+
+// I2C6
+// Module 0/1 I2C MUX x3
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				i2c17mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c17mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c17mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c17mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux20: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux21: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				vcc-supply = <&standby_power_regulator>;
+				gpio-line-names =
+					"RST_CX_0_L-O",
+					"RST_CX_1_L-O",
+					"CX0_SSD0_PRSNT_L-I",
+					"CX1_SSD1_PRSNT_L-I",
+					"CX_BOOT_CMPLT_CX0-I",
+					"CX_BOOT_CMPLT_CX1-I",
+					"CX_TWARN_CX0_L-I",
+					"CX_TWARN_CX1_L-I",
+					"CX_OVT_SHDN_CX0-I",
+					"CX_OVT_SHDN_CX1-I",
+					"FNP_L_CX0-O",
+					"FNP_L_CX1-O",
+					"",
+					"MCU_GPIO-I",
+					"MCU_RST_N-O",
+					"MCU_RECOVERY_N-O";
+			};
+		};
+
+		imux22: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux23: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x73>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+				vdd-supply = <&standby_power_regulator>;
+
+				i2c25mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c25mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c25mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c25mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				i2c29mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c29mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c29mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c29mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				vcc-supply = <&standby_power_regulator>;
+				gpio-line-names =
+					"SEC_RST_CX_0_L-O",
+					"SEC_RST_CX_1_L-O",
+					"SEC_CX0_SSD0_PRSNT_L-I",
+					"SEC_CX1_SSD1_PRSNT_L-I",
+					"SEC_CX_BOOT_CMPLT_CX0-I",
+					"SEC_CX_BOOT_CMPLT_CX1-I",
+					"SEC_CX_TWARN_CX0_L-I",
+					"SEC_CX_TWARN_CX1_L-I",
+					"SEC_CX_OVT_SHDN_CX0-I",
+					"SEC_CX_OVT_SHDN_CX1-I",
+					"SEC_FNP_L_CX0-O",
+					"SEC_FNP_L_CX1-O",
+					"",
+					"SEC_MCU_GPIO-I",
+					"SEC_MCU_RST_N-O",
+					"SEC_MCU_RECOVERY_N-O";
+				};
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux36: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux37: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux38: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux39: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+// I2C7
+// Module 0/1 Leak Sensors
+// Module 0/1 Fan Controllers
+&i2c6 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pmic@12 {
+		compatible = "ti,lm5066i";
+		reg = <0x12>;
+		shunt-resistor-micro-ohms = <190>;
+		status = "okay";
+	};
+
+	pmic@14 {
+		compatible = "ti,lm5066i";
+		reg = <0x14>;
+		shunt-resistor-micro-ohms = <190>;
+		status = "okay";
+	};
+
+	pwm@20 {
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	pwm@23 {
+		compatible = "maxim,max31790";
+		reg = <0x23>;
+	};
+
+	pwm@2c {
+		compatible = "maxim,max31790";
+		reg = <0x2c>;
+	};
+
+	pwm@2f {
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+};
+
+// I2C9
+// M.2
+&i2c8 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C10
+// HMC IO Expander
+// Module 0/1 IO Expanders
+&i2c9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// Module 0, Expander @0x20
+	exp0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"FPGA_THERM_OVERT_L-I",
+			"FPGA_READY_BMC-I",
+			"HMC_BMC_DETECT-O",
+			"HMC_PGOOD-O",
+			"",
+			"BMC_STBY_CYCLE-O",
+			"FPGA_EROT_FATAL_ERROR_L-I",
+			"WP_HW_EXT_CTRL_L-O",
+			"EROT_FPGA_RST_L-O",
+			"FPGA_EROT_RECOVERY_L-O",
+			"BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"USB_HUB_RESET_L-O",
+			"NCSI_CS1_SEL-O",
+			"SGPIO_EN_L-O",
+			"B2B_IOEXP_INT_L-I",
+			"I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// Module 1, Expander @0x21
+	exp1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"SEC_FPGA_THERM_OVERT_L-I",
+			"SEC_FPGA_READY_BMC-I",
+			"",
+			"",
+			"",
+			"",
+			"SEC_FPGA_EROT_FATAL_ERROR_L-I",
+			"SEC_WP_HW_EXT_CTRL_L-O",
+			"SEC_EROT_FPGA_RST_L-O",
+			"SEC_FPGA_EROT_RECOVERY_L-O",
+			"SEC_BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"SEC_USB2_HUB_RST_L-O",
+			"",
+			"",
+			"",
+			"SEC_I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// HMC Expander @0x27
+	exp2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"HMC_PRSNT_L-I",
+			"HMC_READY-I",
+			"HMC_EROT_FATAL_ERROR_L-I",
+			"I2C_MUX_SEL-O",
+			"HMC_EROT_SPI_MUX_SEL-O",
+			"HMC_EROT_RECOVERY_L-O",
+			"HMC_EROT_RST_L-O",
+			"GLOBAL_WP_HMC-O",
+			"FPGA_RST_L-O",
+			"USB2_HUB_RST-O",
+			"CPU_UART_MUX_SEL-O",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// HMC Expander @0x74
+	exp3: gpio@74 {
+		compatible = "nxp,pca9555";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"IOB_PRSNT_L",
+			"IOB_DP_HPD",
+			"IOX_BMC_RESET",
+			"IOB_IOEXP_INT_L",
+			"IOB_UID_LED_L",
+			"IOB_UID_BTN_L",
+			"IOB_SYS_RST_BTN_L",
+			"IOB_PWR_LED_L",
+			"IOB_PWR_BTN_L",
+			"IOB_PHY_RST",
+			"CPLD_JTAG_MUX_SEL",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+};
+
+// I2C11
+// BMC FRU EEPROM
+// BMC Temp Sensor
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// BMC FRU EEPROM - 256 bytes
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+// I2C12
+&i2c11 {
+	status = "disabled";
+};
+
+// I2C13
+&i2c12 {
+	status = "disabled";
+};
+
+// I2C14
+// Module 0 UPHY3 SMBus
+&i2c13 {
+	status = "disabled";
+};
+
+// I2C15
+// Module 1 UPHY3 SMBus
+&i2c14 {
+	status = "okay";
+	clock-frequency = <100000>;
+	multi-master;
+
+	//E1.S drive slot 0-3
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		e1si2c0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		e1si2c1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		e1si2c2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		e1si2c3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+// I2C16
+&i2c15 {
+	status = "okay";
+	clock-frequency = <100000>;
+	multi-master;
+
+	//E1.S drive slot 4-7
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		e1si2c4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		e1si2c5: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		e1si2c6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		e1si2c7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&rng {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/ "", "", "", "", "", "", "", "",
+		/*B0-B7*/ "", "", "", "", "", "", "", "",
+		/*C0-C7*/ "SGPIO_I2C_MUX_SEL-O", "", "", "", "", "", "", "",
+		/*D0-D7*/ "", "", "", "UART1_MUX_SEL-O", "", "FPGA_PEX_RST_L-O", "", "",
+		/*E0-E7*/ "RTL8221_PHY_RST_L-O", "RTL8211_PHY_INT_L-I",	"", "UART3_MUX_SEL-O",
+					"", "", "", "SGPIO_BMC_EN-O",
+		/*F0-F7*/ "", "", "", "", "", "", "", "",
+		/*G0-G7*/ "", "", "", "", "", "", "", "",
+		/*H0-H7*/ "", "", "", "", "", "", "", "",
+		/*I0-I7*/ "", "", "", "", "", "QSPI2_RST_L-O", "GLOBAL_WP_BMC-O", "BMC_DDR4_TEN-O",
+		/*J0-J7*/ "", "", "", "", "", "", "", "",
+		/*K0-K7*/ "", "", "", "", "", "", "", "",
+		/*L0-L7*/ "", "", "", "", "", "", "", "",
+		/*M0-M7*/ "PCIE_EP_RST_EN-O", "BMC_FRU_WP-O", "FPGA_RST_L-O", "STBY_POWER_EN-O",
+					"STBY_POWER_PG-I", "PCIE_EP_RST_L-O", "", "",
+		/*N0-N7*/ "", "", "", "", "", "", "", "",
+		/*O0-O7*/ "", "", "", "", "", "", "", "",
+		/*P0-P7*/ "", "", "", "", "", "", "", "",
+		/*Q0-Q7*/ "", "", "", "", "", "", "", "",
+		/*R0-R7*/ "", "", "", "", "", "", "", "",
+		/*S0-S7*/ "", "", "", "", "", "", "", "",
+		/*T0-T7*/ "", "", "", "", "", "", "", "",
+		/*U0-U7*/ "", "", "", "", "", "", "", "",
+		/*V0-V7*/ "AP_EROT_REQ-O", "EROT_AP_GNT-I", "", "","PCB_TEMP_ALERT-I", "","", "",
+		/*W0-W7*/ "", "", "", "", "", "", "", "",
+		/*X0-X7*/ "", "", "TPM_MUX_SEL-O", "", "", "", "", "",
+		/*Y0-Y7*/ "", "", "", "EMMC_RST-O", "","", "", "",
+		/*Z0-Z7*/ "BMC_READY-O","", "", "", "", "", "", "";
+};
+
+&gpio1 {
+	/* 36 1.8V GPIOs */
+	gpio-line-names =
+		/*A0-A7*/ "", "", "", "", "", "", "", "",
+		/*B0-B7*/ "", "", "", "", "", "", "IO_EXPANDER_INT_L-I","",
+		/*C0-C7*/ "", "", "", "", "", "", "", "",
+		/*D0-D7*/ "", "", "", "", "", "", "SPI_HOST_TPM_RST_L-O", "SPI_BMC_FPGA_INT_L-I",
+		/*E0-E7*/ "", "", "", "", "", "", "", "";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
new file mode 100644
index 000000000000..9f2ad551255d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Inventec Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Lanyang BMC";
+	compatible = "inventec,lanyang-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sys_boot_status {
+			label = "System_boot_status";
+			gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		attention {
+			label = "Attention_locator";
+			gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		plt_fault {
+			label = "Platform_fault";
+			gpios = <&gpio ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_fault {
+			label = "Onboard_drive_fault";
+			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
+		};
+		bmc_err {
+			label = "BMC_fault";
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		sys_err {
+			label = "Sys_fault";
+			gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+		     &pinctrl_spi2cs0_default
+		     &pinctrl_spi2cs1_default
+		     &pinctrl_spi2miso_default
+		     &pinctrl_spi2mosi_default>;
+
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@55 {
+		compatible = "atmel,24c64";
+		reg = <0x55>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	tmp75@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&gpio {
+	pin-gpio-b0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_HDD1_PWR_EN";
+	};
+
+	pin-gpio-b5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_USB1_OCI2";
+	};
+
+	pin-gpio-h5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_CP0_PERST_ENABLE_R";
+	};
+
+	pin-gpio-z2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_PCA9546_U177_N";
+	};
+
+	pin-gpio-aa6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_CP0_RESET_N";
+	};
+
+	pin-gpio-aa7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_TPM_RESET_N";
+	};
+
+	pin-gpio-ab0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "BMC_USB_PWRON_N";
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
new file mode 100644
index 000000000000..6c8b966ffccc
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
@@ -0,0 +1,667 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Mowgli BMC";
+	compatible = "ibm,mowgli-bmc", "aspeed,ast2500";
+
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-air-water {
+			label = "air-water";
+			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 6)>;
+		};
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Z, 2)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Z, 0)>;
+		};
+
+		button-id {
+			label = "id-button";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		front-fault {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		front-id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		fan0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
+		};
+
+		fan2 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
+		};
+
+		fan3 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
+		};
+
+		fan4 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon-12v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>;
+	};
+
+	iio-hwmon-5v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 1>;
+	};
+
+	iio-hwmon-3v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 2>;
+	};
+
+	iio-hwmon-vdd {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 3>;
+	};
+
+	iio-hwmon-vcs {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>;
+	};
+
+	iio-hwmon-vdn {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 7>;
+	};
+
+	iio-hwmon-vio {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 9>;
+	};
+
+	iio-hwmon-vddra {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 11>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+	iio-hwmon-vddrb {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 13>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "obmc-ubi";
+			};
+		};
+	};
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "alt-u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "alt-u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "alt-obmc-ubi";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* APSS */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* CPU MFG CONN */
+
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* APSS */
+	/* CPLD */
+
+	/* PCA9516 (repeater) ->
+	 *    CLK Buffer 9FGS9092
+	 *    Power Supply 0
+	 *    Power Supply 1
+	 *    PCA 9552 LED
+	 */
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* CP0 VDD & VCS : IR35221 */
+	/* CP0 VDN & VIO : IR35221 */
+	/* CP0 VDDR : IR35221 */
+
+	ir35221@28 {
+		compatible = "infineon,ir35221";
+		reg = <0x28>;
+	};
+
+	ir35221@29 {
+		compatible = "infineon,ir35221";
+		reg = <0x29>;
+	};
+
+	ir35221@2d {
+		compatible = "infineon,ir35221";
+		reg = <0x2d>;
+	};
+
+};
+
+&i2c5 {
+	status = "disabled";
+};
+
+&i2c6 {
+	status = "disabled";
+};
+
+&i2c7 {
+	status = "disabled";
+};
+
+&i2c8 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	/* PCIe G3 x16 slot */
+};
+
+&i2c10 {
+	status = "disabled";
+};
+
+&i2c11 {
+	status = "okay";
+
+	/* CPLD */
+	/* TPM */
+	/* RTC RX8900CE */
+	/* TMP275A */
+	/* TMP275A */
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+};
+
+&i2c12 {
+	status = "disabled";
+};
+
+&i2c13 {
+	status = "disabled";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
new file mode 100644
index 000000000000..ce6d30ddf07c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 YADRO
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Nicole BMC";
+	compatible = "yadro,nicole-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "platform:green:power";
+			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			label = "platform:blue:indicator";
+			gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		fault {
+			label = "platform:red:fault";
+			gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		attention {
+			label = "platform:yellow:alarm";
+			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	/* CPU0 characterization connector */
+};
+
+&i2c3 {
+	status = "okay";
+	/* CLK GEN SI5338 */
+};
+
+&i2c4 {
+	status = "okay";
+	/* Voltage regulators for CPU0 */
+};
+
+&i2c5 {
+	status = "okay";
+	/* Voltage regulators for CPU1 */
+};
+
+&i2c6 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	/* CPLD */
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","bmc_power_up","sys_pwrok_buf",
+			"func_mode0","func_mode1","func_mode2","","",
+	/*E0-E7*/	"","ncsi_cfg","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","power-button","","","","","",
+	/*P0-P7*/	"","fsi-trans","pm_rtc_adc_en","","","","","",
+	/*Q0-Q7*/	"","","","","","","","id-button",
+	/*R0-R7*/	"","software_pwrgood","","","","","","",
+	/*S0-S7*/	"","","","","","","","seq_cont",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","led-attention","fsi-data","led-fault",
+			"led-power","","","led-identify",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	func-mode0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	func-mode1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	func-mode2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	seq-cont-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	ncsi-cfg-hog {
+		gpio-hog;
+		input;
+		gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
new file mode 100644
index 000000000000..7953059a6c67
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Palmetto BMC";
+	compatible = "tyan,palmetto-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@5f000000 {
+			no-map;
+			reg = <0x5f000000 0x01000000>; /* 16M */
+		};
+
+		coldfire_memory: codefire_memory@5ee00000 {
+			reg = <0x5ee00000 0x00200000>;
+			no-map;
+		};
+
+		flash_memory: region@5c000000 {
+			no-map;
+			reg = <0x5C000000 0x02000000>; /* 32MB */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2400-cf-fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(A, 5) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 5)>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1debug_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		label = "pnor";
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flbusy_default &pinctrl_flwp_default
+
+			&pinctrl_vgahs_default &pinctrl_vgavs_default
+			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+
+	rtc@68 {
+		compatible = "maxim,ds3231";
+		reg = <0x68>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp423@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	occ-hwmon@50 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x50>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi>;
+};
+
+&gpio {
+	pin-func-mode0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode0";
+	};
+
+	pin-func-mode1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 5)  GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode1";
+	};
+
+	pin-func-mode2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode2";
+	};
+
+	pin-gpio-a0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_FAN_RESERVED_N";
+	};
+
+	pin-gpio-a1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_WDT_N";
+	};
+
+	pin-gpio-b1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_BOOT_MODE";
+	};
+
+	pin-gpio-b2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_RESET_N";
+	};
+
+	pin-gpio-b7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SPIVID_STBY_RESET_N";
+	};
+
+	pin-gpio-d1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_POWER_UP";
+	};
+
+	pin-gpio-f1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_BATTERY_TEST";
+	};
+
+	pin-gpio-f4-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "AST_HW_FAULT_N";
+	};
+
+	pin-gpio-f5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "AST_SYS_FAULT_N";
+	};
+
+	pin-gpio-f7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FULL_SPEED_N";
+	};
+
+	pin-gpio-g3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FAN_ERROR_N";
+	};
+
+	pin-gpio-g4-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_WDT_RST1_P";
+	};
+
+	pin-gpio-g5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_WDT_RST2_P";
+	};
+
+	pin-gpio-h0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PE_SLOT_TEST_EN_N";
+	};
+
+	pin-gpio-h1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_RTCRST_N";
+	};
+
+	pin-gpio-h2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SYS_PWROK_BMC";
+	};
+
+	pin-gpio-h7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_TPM_INT_N";
+	};
+};
+
+&fsi {
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "ibm,fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
new file mode 100644
index 000000000000..a0263d969e51
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Romulus BMC";
+	compatible = "ibm,romulus-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		id-button {
+			label = "id-button";
+			gpios = <&gpio ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Q, 7)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	/* PCIe slot 1 (x8) */
+	status = "okay";
+};
+
+&i2c7 {
+	/* PCIe slot 2 (x16) */
+	status = "okay";
+};
+
+&i2c8 {
+	/* PCIe slot 3 (x16) */
+	status = "okay";
+};
+
+&i2c9 {
+	/* PCIe slot 4 (x16) */
+	status = "okay";
+};
+
+&i2c10 {
+	/* PCIe slot 5 (x8) */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","nic_func_mode0","nic_func_mode1","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","power-button","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","led-fault","",
+				"led-identify","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","id-button",
+	/*R0-R7*/	"","","fsi-trans","","","led-power","","",
+	/*S0-S7*/	"","","","","","","","seq_cont",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","","fsi-data","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	nic-func-mode0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	nic-func-mode1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	seq-cont-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@4 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@5 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@6 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
new file mode 100644
index 000000000000..b31eb8e58c6b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -0,0 +1,882 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Tacoma";
+	compatible = "ibm,tacoma-bmc", "aspeed,ast2600";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@b8000000 {
+			no-map;
+			reg = <0xb8000000 0x4000000>; /* 64M */
+		};
+
+		ramoops@bc000000 {
+			compatible = "ramoops";
+			reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;	/* 16M */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 3)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(E, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon-dps310 {
+		compatible = "iio-hwmon";
+		io-channels = <&dps 0>;
+	};
+
+	iio-hwmon-bmp280 {
+		compatible = "iio-hwmon";
+		io-channels = <&bmp 1>;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"fsi-mux","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"power-button","","","checkstop","","presence-ps1","","led-rear-fault",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","presence-ps0","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"led-rear-power","led-rear-id","","usb-power","","","","",
+	/*P0-P7*/	"","","","","","bmc-tpm-reset","","",
+	/*Q0-Q7*/	"cfam-reset","","","","","","","fsi-routing",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <36>, <270>;
+};
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam0_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam0_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam0_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam0_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam0_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam0_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam0_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam0_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam1_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam1_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam1_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam1_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam1_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam1_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam1_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam1_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam1_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c102 = &cfam0_i2c2;
+		i2c103 = &cfam0_i2c3;
+		i2c104 = &cfam0_i2c4;
+		i2c105 = &cfam0_i2c5;
+		i2c106 = &cfam0_i2c6;
+		i2c107 = &cfam0_i2c7;
+		i2c108 = &cfam0_i2c8;
+		i2c109 = &cfam0_i2c9;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c200 = &cfam1_i2c0;
+		i2c201 = &cfam1_i2c1;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c204 = &cfam1_i2c4;
+		i2c205 = &cfam1_i2c5;
+		i2c206 = &cfam1_i2c6;
+		i2c207 = &cfam1_i2c7;
+		i2c208 = &cfam1_i2c8;
+		i2c209 = &cfam1_i2c9;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c212 = &cfam1_i2c12;
+		i2c213 = &cfam1_i2c13;
+		i2c214 = &cfam1_i2c14;
+	};
+
+};
+
+&i2c0 {
+	multi-master;
+	status = "okay";
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	tpm: tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	bmp: bmp280@77 {
+		compatible = "bosch,bmp280";
+		reg = <0x77>;
+		#io-channel-cells = <1>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&uart5 {
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&pinctrl {
+	/* Hog these as no driver is probed for the entire LPC block */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpc_default>,
+		    <&pinctrl_lsirq_default>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
new file mode 100644
index 000000000000..8a7fb55ab489
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 YADRO
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Vesnin BMC";
+	compatible = "yadro,vesnin-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@5f000000 {
+			no-map;
+			reg = <0x5f000000 0x01000000>; /* 16MB */
+		};
+		flash_memory: region@5c000000 {
+			no-map;
+			reg = <0x5c000000 0x02000000>; /* 32M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+		};
+		power_red {
+			gpios = <&gpio ASPEED_GPIO(N, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		power_green {
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		id_blue {
+			gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		alarm_red {
+			gpios = <&gpio ASPEED_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		alarm_yel {
+			gpios = <&gpio ASPEED_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			linux,code = <74>;
+			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		event-identify {
+			label = "identify";
+			linux,code = <152>;
+			gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+        label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt";
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1debug_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp75@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	occ-hwmon@50 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x50>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	occ-hwmon@51 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x51>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	w83795g@2f {
+		compatible = "nuvoton,w83795g";
+		reg = <0x2f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	occ-hwmon@56 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x56>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	occ-hwmon@57 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x57>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "maxim,ds3231";
+		reg = <0x68>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+	cd-inverted;
+	disable-wp;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
new file mode 100644
index 000000000000..89907b628b65
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
@@ -0,0 +1,695 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Witherspoon BMC";
+	compatible = "ibm,witherspoon-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		vga_memory: region@9f000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32MM */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-air-water {
+			label = "air-water";
+			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(B, 5)>;
+		};
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 7)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(N, 0)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		fan2 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		fan3 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		front-fault {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		front-power {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		front-id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		rear-fault {
+			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-id {
+			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-power {
+			gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon-dps310 {
+		compatible = "iio-hwmon";
+		io-channels = <&dps 0>;
+	};
+
+	iio-hwmon-bmp280 {
+		compatible = "iio-hwmon";
+		io-channels = <&bmp 1>;
+	};
+
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","air-water","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","","","",
+	/*E0-E7*/	"fsi-data","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"presence-ps1","","led-rear-fault","led-rear-power",
+		        "led-rear-id","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","presence-ps0",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","fsi-trans","","","power-button","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "obmc-ubi";
+			};
+		};
+	};
+
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "alt-u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "alt-u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "alt-obmc-ubi";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* APSS */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* MUX ->
+	 *    Samtec 1
+	 *    Samtec 2
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	bmp: bmp280@77 {
+		compatible = "bosch,bmp280";
+		reg = <0x77>;
+		#io-channel-cells = <1>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+
+&i2c5 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c10 {
+	/* MUX
+	 *   -> PCIe Slot 3
+	 *   -> PCIe Slot 4
+	 */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
new file mode 100644
index 000000000000..af3a9d39d277
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
@@ -0,0 +1,576 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Zaius BMC";
+	compatible = "ingrasys,zaius-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c15 = &i2cpcie0;
+		i2c16 = &i2cpcie1;
+		i2c17 = &i2cpcie2;
+		i2c19 = &i2cpcie3;
+		i2c20 = &i2cpcie4;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+	};
+
+	onewire0 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire1 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire2 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire3 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 7)>;
+		};
+
+		event-pcie-e2b-present {
+			label = "pcie-e2b-present";
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(E, 7)>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sys_boot_status {
+			label = "System boot status";
+			gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		attention {
+			label = "Attention";
+			gpios = <&gpio ASPEED_GPIO(D, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		plt_fault {
+			label = "Platform fault";
+			gpios = <&gpio ASPEED_GPIO(D, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		hdd_fault {
+			label = "Onboard drive fault";
+			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		clock-gpios = <&gpio ASPEED_GPIO(G, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(G, 1) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+		     &pinctrl_spi2cs0_default
+		     &pinctrl_spi2cs1_default
+		     &pinctrl_spi2miso_default
+		     &pinctrl_spi2mosi_default>;
+
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+
+	/* Power sequencer UCD90160 PMBUS @64h
+	 * FRU AT24C64D @50h
+	 * RTC PCF8523 @68h
+	 * Clock buffer 9DBL04 @6dh
+	 */
+};
+
+&i2c1 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2cpcie0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2cpcie1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2cpcie2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2ctpm: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	/* MUX1 PCA9546A @71h
+	 *   PCIe 0
+	 *   PCIe 1
+	 *   PCIe 2
+	 *   TPM header
+	 */
+};
+
+&i2c2 {
+	status = "disabled";
+
+	/* OCP Mezz Connector A (OOB SMBUS) */
+};
+
+&i2c3 {
+	status = "disabled";
+
+	/* OCP Mezz Connector A (PCIe slot SMBUS) */
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2cpcie3: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2cpcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+
+	/* MUX1 PCA9546A @71h
+	 *   PCIe 3
+	 *   PCIe 4
+	 */
+};
+
+
+&i2c5 {
+	status = "disabled";
+
+	/* CPU0 PRM 0.7V */
+	/* CPU0 PRM 1.2V CH03 */
+	/* CPU0 PRM 0.8V */
+	/* CPU0 PRM 1.2V CH47 */
+};
+
+&i2c6 {
+	status = "disabled";
+
+	/* CPU1 PRM 0.7V */
+	/* CPU1 PRM 1.2V CH03 */
+	/* CPU1 PRM 0.8V */
+	/* CPU1 PRM 1.2V CH47 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	pca9541a@70 {
+		compatible = "nxp,pca9541";
+		reg = <0x70>;
+
+		i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hotswap@54 {
+				compatible = "ti,lm5066i";
+				reg = <0x54>;
+			};
+		};
+
+	};
+
+	vrm@64 {
+		compatible = "isil,isl68137";
+		reg = <0x64>;
+	};
+
+	vrm@40 {
+		compatible = "isil,isl68137";
+		reg = <0x40>;
+	};
+
+	vrm@60 {
+		compatible = "isil,isl68137";
+		reg = <0x60>;
+	};
+
+	vrm@43 {
+		compatible = "infineon,ir38064";
+		reg = <0x43>;
+	};
+
+	vrm@41 {
+		compatible = "isil,isl68137";
+		reg = <0x41>;
+	};
+
+	/* Master selector PCA9541A @70h (other master: CPU0)
+	 *   LM5066I PMBUS @10h
+	 */
+
+	/*
+	 * Brick will be one of these types/addresses.  Depending
+	 * on the board SKU only one is actually present and will successfully
+	 * instantiate while the others will fail the probe operation.
+	 * These are the PVT (and presumably beyond) addresses:
+	 *    12V Quarter Brick DC/DC Converter Q54SJ12050 @6Ah
+	 *    12V Quarter Brick DC/DC Converter Q54SH12050 @30h
+	 */
+	power-brick@6a {
+		compatible = "delta,dps800";
+		reg = <0x6a>;
+	};
+	power-brick@30 {
+		compatible = "delta,dps800";
+		reg = <0x30>;
+	};
+
+	/* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */
+	/* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */
+	/* CPU0 VR ISL68137 0.8V PMBUS @60h */
+	/* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @43h */
+	/* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */
+	/* Master selector PCA9541A @70h (other master: CPU0)
+	 *   LM5066I PMBUS @10h
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	vrm@64 {
+		compatible = "isil,isl68137";
+		reg = <0x64>;
+	};
+
+	vrm@40 {
+		compatible = "isil,isl68137";
+		reg = <0x40>;
+	};
+
+	vrm@41 {
+		compatible = "isil,isl68137";
+		reg = <0x41>;
+	};
+
+	vrm@42 {
+		compatible = "infineon,ir38064";
+		reg = <0x42>;
+	};
+
+	vrm@60 {
+		compatible = "isil,isl68137";
+		reg = <0x60>;
+	};
+
+	/* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @64h */
+	/* CPU1 VR ISL68137 1.2V CH03 PMBUS @40h */
+	/* CPU1 VR ISL68137 1.2V CH47 PMBUS @41h */
+	/* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */
+	/* CPU1 VR ISL68137 0.8V PMBUS @60h */
+};
+
+
+&i2c9 {
+	status = "disabled";
+
+	/* Fan board */
+};
+
+&i2c10 {
+	status = "disabled";
+};
+
+&i2c11 {
+	status = "disabled";
+
+	/* GPU sideband */
+};
+
+&i2c12 {
+	status = "disabled";
+};
+
+&i2c13 {
+	status = "disabled";
+
+	/* MUX PI3USB102
+	 *   CPU0 debug
+	 *   CPU1 debug
+	 */
+};
+
+&pinctrl {
+	pinctrl_gpioh_unbiased: gpioi_unbiased {
+		pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7";
+		bias-disable;
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpioh_unbiased>;
+
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","led-sys-boot-status","led-attention",
+				"led-fault",
+	/*E0-E7*/	"","","","","","","","presence-pcie-e2b",
+	/*F0-F7*/	"","","","","","","","checkstop",
+	/*G0-G7*/	"fsi-clock","fsi-data","","","","","","",
+	/*H0-H7*/	"onewire0","onewire1","onewire2","onewire3","","","","",
+	/*I0-I7*/	"","","","power-button","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","iso_u164_en","","fsi-trans","",
+	/*P0-P7*/	"ncsi_mux_en_n","bmc_i2c2_sw_rst_n","","bmc_i2c5_sw_rst_n","",
+				"","fsi-mux","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","led-hdd-fault","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	line-iso-u146-en-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	ncsi-mux-en-n-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+
+	line-bmc-i2c2-sw-rst-n-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	line-bmc-i2c5-sw-rst-n-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-portwell-neptune.dts
new file mode 100644
index 000000000000..a5e64ccc2b3a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-portwell-neptune.dts
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Portwell Neptune BMC";
+	compatible = "portwell,neptune-bmc", "aspeed,ast2500";
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		postcode0 {
+			label = "BMC_UP";
+			gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		postcode1 {
+			label = "BMC_HB";
+			gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+		postcode2 {
+			label = "FAULT";
+			gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		};
+		// postcode3-7 are GPIOH3-H7
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart1 {
+	// Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default
+		     &pinctrl_mdio1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>,
+		 <&syscon ASPEED_CLK_MAC2RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&i2c1 {
+	status = "okay";
+	// To PCIe slot SMBUS
+};
+
+&i2c2 {
+	status = "okay";
+	// To LAN I210
+};
+
+&i2c3 {
+	status = "okay";
+	// SMBus to COMe AB
+};
+
+&i2c4 {
+	status = "okay";
+	// I2C to COMe AB
+};
+
+&i2c5 {
+	status = "okay";
+// 	USB Debug card
+	pca9555@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
new file mode 100644
index 000000000000..259ef3f54c5c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "Qualcomm DC-SCM V1 BMC";
+	compatible = "qcom,dc-scm-v1-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	/* Bootloader sets up the MAC to insert delay */
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+
+	use-ncsi;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <133000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BMC_FLASH_MUX_SEL","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"BMC_FWSPI_RST_N","","GPIO_1_BMC_3V3","","","","","",
+	/*O0-O7*/	"JTAG_MUX_A","JTAG_MUX_B","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","SCMFPGA_SPARE_GPIO1_3V3",
+			"SCMFPGA_SPARE_GPIO2_3V3","SCMFPGA_SPARE_GPIO3_3V3",
+			"SCMFPGA_SPARE_GPIO4_3V3","SCMFPGA_SPARE_GPIO5_3V3",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*A0-A7*/	"GPI_1_BMC_1V8","","","","","",
+			"SCMFPGA_SPARE_GPIO1_1V8","SCMFPGA_SPARE_GPIO2_1V8",
+	/*B0-B7*/	"SCMFPGA_SPARE_GPIO3_1V8","SCMFPGA_SPARE_GPIO4_1V8",
+			"SCMFPGA_SPARE_GPIO5_1V8","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","BMC_SPI1_RST_N","BIOS_FLASH_MUX_SEL","",
+			"","TPM2_PIRQ_N","TPM2_RST_N","",
+	/*E0-E7*/	"","","","","","","","";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts
new file mode 100644
index 000000000000..fed2791f5994
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts
@@ -0,0 +1,518 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Quanta Q71L BMC";
+	compatible = "quanta,q71l-bmc", "aspeed,ast2400";
+
+	aliases {
+		i2c14 = &i2c_pcie2;
+		i2c15 = &i2c_pcie3;
+		i2c16 = &i2c_pcie6;
+		i2c17 = &i2c_pcie7;
+		i2c18 = &i2c_pcie1;
+		i2c19 = &i2c_pcie4;
+		i2c20 = &i2c_pcie5;
+		i2c21 = &i2c_pcie8;
+		i2c22 = &i2c_pcie9;
+		i2c23 = &i2c_pcie10;
+		i2c24 = &i2c_ssd1;
+		i2c25 = &i2c_ssd2;
+		i2c26 = &i2c_psu4;
+		i2c27 = &i2c_psu1;
+		i2c28 = &i2c_psu3;
+		i2c29 = &i2c_psu2;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x8000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@47800000 {
+			no-map;
+			reg = <0x47800000 0x00800000>; /* 8MB */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 11>;
+	};
+
+	i2c1mux: i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* mux-gpios = <&sgpio 10 GPIO_ACTIVE_HIGH> */
+		i2c-parent = <&i2c1>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default
+			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* temp2 inlet */
+	tmp75@4c {
+		compatible = "ti,tmp75";
+		reg = <0x4c>;
+	};
+
+	/* temp3 */
+	tmp75@4e {
+		compatible = "ti,tmp75";
+		reg = <0x4e>;
+	};
+
+	/* temp1 */
+	tmp75@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	/* Baseboard FRU */
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+
+	/* FP FRU */
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* 0: PCIe Slot 2,
+	 *    Slot 3,
+	 *    Slot 6,
+	 *    Slot 7
+	 */
+	i2c-mux@74 {
+		compatible = "nxp,pca9546";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;  /* may use mux@77 next. */
+
+		i2c_pcie2: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie3: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_pcie6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_pcie7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	/* 0: PCIe Slot 1,
+	 *    Slot 4,
+	 *    Slot 5,
+	 *    Slot 8,
+	 *    Slot 9,
+	 *    Slot 10,
+	 *    SSD 1,
+	 *    SSD 2
+	 */
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;  /* may use mux@74 next. */
+
+		i2c_pcie1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_pcie5: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_pcie8: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c_pcie9: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c_pcie10: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c_ssd1: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c_ssd2: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* BIOS FRU */
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* 0: PSU4
+	 *    PSU1
+	 *    PSU3
+	 *    PSU2
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c_psu4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			psu@59 {
+				compatible = "pmbus";
+				reg = <0x59>;
+			};
+		};
+
+		i2c_psu1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			psu@58 {
+				compatible = "pmbus";
+				reg = <0x58>;
+			};
+		};
+
+		i2c_psu3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			psu@58 {
+				compatible = "pmbus";
+				reg = <0x58>;
+			};
+		};
+
+		i2c_psu2: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			psu@59 {
+				compatible = "pmbus";
+				reg = <0x59>;
+			};
+		};
+	};
+
+	/* PDB FRU */
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* BMC FRU */
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm1_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c1mux {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Memory Riser 1 FRU */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+		};
+
+		/* Memory Riser 2 FRU */
+		eeprom@51 {
+			compatible = "atmel,24c02";
+			reg = <0x51>;
+		};
+
+		/* Memory Riser 3 FRU */
+		eeprom@52 {
+			compatible = "atmel,24c02";
+			reg = <0x52>;
+		};
+
+		/* Memory Riser 4 FRU */
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+		};
+	};
+
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Memory Riser 5 FRU */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+		};
+
+		/* Memory Riser 6 FRU */
+		eeprom@51 {
+			compatible = "atmel,24c02";
+			reg = <0x51>;
+		};
+
+		/* Memory Riser 7 FRU */
+		eeprom@52 {
+			compatible = "atmel,24c02";
+			reg = <0x52>;
+		};
+
+		/* Memory Riser 8 FRU */
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
new file mode 100644
index 000000000000..86451227847b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Quanta Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Quanta S6Q BMC";
+	compatible = "quanta,s6q-bmc", "aspeed,ast2600";
+
+	aliases {
+		// bus 0
+		i2c20 = &SMB_HOST_DB2000_3V3AUX_SCL;
+		i2c21 = &U12_PCA9546_CH1;
+		i2c22 = &SMB_HOST_DB800_B_SCL;
+		i2c23 = &SMB_HOST_DB800_C_SCL;
+
+		// bus 1
+		i2c24 = &SMB_M2_P0_1V8AUX_SCL;
+		i2c25 = &SMB_M2_P1_1V8AUX_SCL;
+		i2c26 = &SMB_CPU_PIROM_3V3AUX_SCL;
+		i2c27 = &SMB_TEMP_3V3AUX_SCL;
+		i2c28 = &SMB_IPMB_3V3AUX_SSDSB_SCL;
+		i2c29 = &SMB_IPMB_3V3AUX_SCL;
+		i2c31 = &SMB_FB_SCL;
+
+		// bus 1 - Fan board
+		i2c32 = &SMB_IOEXP_SCL;
+		i2c33 = &SMB_PROGRAM_SCL;
+		i2c34 = &SMB_FB_SCL_CH2;
+		i2c35 = &SMB_FAN_SENSE_SCL;
+
+		// bus 6
+		i2c36 = &U197_PCA9546_CH0;
+		i2c37 = &U197_PCA9546_CH1;
+		i2c38 = &U197_PCA9546_CH2;
+		i2c39 = &U197_PCA9546_CH3;
+
+		//bus 7
+		i2c40 = &SMB_OCP_SFF_3V3AUX_SCL; //OCP1
+		i2c41 = &SMB_OCP_LFF_3V3AUX_SCL; //OCP2
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		BMC_HEARTBEAT_N {
+			label = "BMC_HEARTBEAT_N";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		BMC_LED_STATUS_AMBER_N {
+			label = "BMC_LED_STATUS_AMBER_N";
+			gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		FM_ID_LED_N {
+			label = "FM_ID_LED_N";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0 - A7*/	"", "", "", "", "", "", "", "",
+	/*B0 - B7*/	"", "", "", "", "", "", "", "",
+	/*C0 - C7*/	"", "", "", "", "", "", "", "",
+	/*D0 - D7*/	"", "", "", "", "", "", "", "",
+	/*E0 - E7*/	"", "", "", "", "", "", "", "",
+	/*F0 - F7*/	"PLTRST_N", "", "PWR_DEBUG_N", "", "", "", "", "",
+	/*G0 - G7*/	"", "", "", "", "", "", "", "",
+	/*H0 - H7*/	"", "", "", "", "", "", "", "",
+	/*I0 - I7*/	"", "", "", "", "", "", "", "",
+	/*J0 - J7*/	"", "", "", "", "", "", "", "",
+	/*K0 - K7*/	"", "", "", "", "", "", "", "",
+	/*L0 - L7*/	"", "", "", "", "PREQ_N", "TCK_MUX_SEL", "", "",
+	/*M0 - M7*/	"", "", "", "PWRGD_SYS_PWROK", "", "PRDY_N", "", "",
+	/*N0 - N7*/	"", "", "", "", "", "", "", "",
+	/*O0 - O7*/	"", "", "", "", "", "", "", "",
+	/*P0 - P7*/	"SYS_BMC_PWRBTN_R_N", "SYS_PWRBTN_N", "FM_MB_RST_BTN", "RST_BMC_RSTBTN_OUT_N", "", "", "", "",
+	/*Q0 - Q7*/	"", "", "", "", "", "", "", "",
+	/*R0 - R7*/	"", "", "", "", "", "", "", "",
+	/*S0 - S7*/	"", "", "", "FP_ID_BTN_SCM_N", "", "", "", "",
+	/*T0 - T7*/	"", "", "", "", "", "", "", "",
+	/*U0 - U7*/	"", "", "", "", "", "", "", "",
+	/*V0 - V7*/	"", "", "", "", "", "SMI", "", "",
+	/*W0 - W7*/	"", "", "", "", "", "", "", "",
+	/*X0 - X7*/	"", "", "", "", "", "", "", "",
+	/*Y0 - Y7*/	"", "", "", "", "", "", "", "",
+	/*Z0 - Z7*/	"FM_BMC_READY_N", "", "", "", "", "", "", "",
+	/*AA0 - AA7*/	"", "", "", "", "", "", "", "",
+	/*AB0 - AB7*/	"", "", "", "", "", "", "", "",
+	/*AC0 - AC7*/	"", "", "", "", "", "", "", "";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <48000>;
+	gpio-line-names =
+	/* SGPIO input lines */
+	/*IOA0-IOA7*/	"","", "SIO_POWER_GOOD","OA1", "XDP_PRST_N","", "","", "FM_SLPS3_PLD_N","", "FM_SLPS4_PLD_N","", "FM_BIOS_POST_CMPLT_BMC_N","", "FM_ADR_TRIGGER_N","OA7",
+	/*IOB0-IOB7*/	"FM_ADR_COMPLETE","", "FM_PMBUS_ALERT_B_EN","", "PSU0_PRESENT_N","", "PSU1_PRESENT_N","", "PSU0_VIN_BUF_GOOD","", "PSU01_VIN_BUF_GOOD","", "PWRGD_PS0_PWROK_R","", "PWRGD_PS1_PWROK_R","",
+	/*IOC0-IOC7*/	"PWRGD_PS_PWROK_PLD_R","", "CHASSIS_INTRUSION","", "BMC_MFG_MODE","", "FM_BMC_EN_DET_R","", "FM_ME_BT_DONE","", "CPU1_PRESENCE","", "CPU2_PRESENCE","", "IRQ_PSYS_CRIT_N","",
+	/*IOD0-IOD7*/	"","", "CPU1_THERMTRIP","", "CPU2_THERMTRIP","", "CPU1_MEM_THERM_EVENT","", "CPU2_MEM_THERM_EVENT","", "CPU1_VRHOT","", "CPU2_VRHOT","", "","",
+	/*IOE0-IOE7*/	"","", "CPU1_MEM_VRHOT","", "CPU2_MEM_VRHOT","", "","", "PCH_BMC_THERMTRIP","", "","", "","", "","",
+	/*IOF0-IOF7*/	"CPU_ERR0","", "CPU_ERR1","", "CPU_ERR2","", "","", "","", "CPU_CATERR","", "","", "","",
+	/*IOG0-IOG7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOH0-IOH7*/	"","", "FP_ID_BTN_R1_N","", "FP_RST_BTN_N","", "","", "","", "FP_PWR_BTN_PLD_N_R","", "","", "","",
+	/*IOI0-IOI7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOJ0-IOJ7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOK0-IOK7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOL0-IOL7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOM0-IOM7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*ION0-ION7*/	"","BMC_SW_HEARTBEAT_N_R", "","FP_LED_FAULT_N", "","FP_ID_LED_N", "","FM_BMC_RSTBTN_OUT_N", "","FM_THERMTRIP_DLY_LVC1_R_N", "","", "","RST_PCA9548_SENSOR_PLD_N", "","USB_OC1_REAR_N",
+	/*IOO0-IOO7*/	"","IRQ_TPM_SPI_N", "","", "","IRQ_PCH_SCI_WHEA_R_N", "","IRQ_BMC_PCH_NMI_R", "","H_CPU_NMI_LVC1_R_N", "","", "","", "","FM_JTAG_BMC_PLD_MUX_SEL",
+	/*IOP0-IOP7*/	"IP0","OP0", "","", "","", "","", "","", "","", "","", "IP7","OP7";
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rmii";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
+		&pinctrl_spi2cs2_default>;
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi2:0";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA0>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA2>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <100000000>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart1 {
+	status = "okay";
+};
+