diff options
Diffstat (limited to 'net/bluetooth/hci_sync.c')
-rw-r--r-- | net/bluetooth/hci_sync.c | 235 |
1 files changed, 223 insertions, 12 deletions
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c index dd770ef5ec36..62d1ff951ebe 100644 --- a/net/bluetooth/hci_sync.c +++ b/net/bluetooth/hci_sync.c @@ -1910,7 +1910,7 @@ int hci_schedule_adv_instance_sync(struct hci_dev *hdev, u8 instance, hdev->adv_instance_timeout = timeout; queue_delayed_work(hdev->req_workqueue, &hdev->adv_instance_expire, - msecs_to_jiffies(timeout * 1000)); + secs_to_jiffies(timeout)); } /* If we're just re-scheduling the same instance again then do not @@ -2693,16 +2693,16 @@ static u8 hci_update_accept_list_sync(struct hci_dev *hdev) /* Force address filtering if PA Sync is in progress */ if (hci_dev_test_flag(hdev, HCI_PA_SYNC)) { - struct hci_cp_le_pa_create_sync *sent; + struct hci_conn *conn; - sent = hci_sent_cmd_data(hdev, HCI_OP_LE_PA_CREATE_SYNC); - if (sent) { + conn = hci_conn_hash_lookup_create_pa_sync(hdev); + if (conn) { struct conn_params pa; memset(&pa, 0, sizeof(pa)); - bacpy(&pa.addr, &sent->addr); - pa.addr_type = sent->addr_type; + bacpy(&pa.addr, &conn->dst); + pa.addr_type = conn->dst_type; /* Clear first since there could be addresses left * behind. @@ -2860,7 +2860,7 @@ static int hci_le_set_ext_scan_param_sync(struct hci_dev *hdev, u8 type, if (sent) { struct hci_conn *conn; - conn = hci_conn_hash_lookup_ba(hdev, ISO_LINK, + conn = hci_conn_hash_lookup_ba(hdev, BIS_LINK, &sent->bdaddr); if (conn) { struct bt_iso_qos *qos = &conn->iso_qos; @@ -3696,6 +3696,9 @@ static int hci_read_local_name_sync(struct hci_dev *hdev) /* Read Voice Setting */ static int hci_read_voice_setting_sync(struct hci_dev *hdev) { + if (!read_voice_setting_capable(hdev)) + return 0; + return __hci_cmd_sync_status(hdev, HCI_OP_READ_VOICE_SETTING, 0, NULL, HCI_CMD_TIMEOUT); } @@ -3766,6 +3769,28 @@ static int hci_write_ca_timeout_sync(struct hci_dev *hdev) sizeof(param), ¶m, HCI_CMD_TIMEOUT); } +/* Enable SCO flow control if supported */ +static int hci_write_sync_flowctl_sync(struct hci_dev *hdev) +{ + struct hci_cp_write_sync_flowctl cp; + int err; + + /* Check if the controller supports SCO and HCI_OP_WRITE_SYNC_FLOWCTL */ + if (!lmp_sco_capable(hdev) || !(hdev->commands[10] & BIT(4)) || + !test_bit(HCI_QUIRK_SYNC_FLOWCTL_SUPPORTED, &hdev->quirks)) + return 0; + + memset(&cp, 0, sizeof(cp)); + cp.enable = 0x01; + + err = __hci_cmd_sync_status(hdev, HCI_OP_WRITE_SYNC_FLOWCTL, + sizeof(cp), &cp, HCI_CMD_TIMEOUT); + if (!err) + hci_dev_set_flag(hdev, HCI_SCO_FLOWCTL); + + return err; +} + /* BR Controller init stage 2 command sequence */ static const struct hci_init_stage br_init2[] = { /* HCI_OP_READ_BUFFER_SIZE */ @@ -3784,6 +3809,8 @@ static const struct hci_init_stage br_init2[] = { HCI_INIT(hci_clear_event_filter_sync), /* HCI_OP_WRITE_CA_TIMEOUT */ HCI_INIT(hci_write_ca_timeout_sync), + /* HCI_OP_WRITE_SYNC_FLOWCTL */ + HCI_INIT(hci_write_sync_flowctl_sync), {} }; @@ -4129,7 +4156,8 @@ static int hci_read_page_scan_type_sync(struct hci_dev *hdev) * support the Read Page Scan Type command. Check support for * this command in the bit mask of supported commands. */ - if (!(hdev->commands[13] & 0x01)) + if (!(hdev->commands[13] & 0x01) || + test_bit(HCI_QUIRK_BROKEN_READ_PAGE_SCAN_TYPE, &hdev->quirks)) return 0; return __hci_cmd_sync_status(hdev, HCI_OP_READ_PAGE_SCAN_TYPE, @@ -5449,7 +5477,7 @@ static int hci_connect_cancel_sync(struct hci_dev *hdev, struct hci_conn *conn, if (conn->type == LE_LINK) return hci_le_connect_cancel_sync(hdev, conn, reason); - if (conn->type == ISO_LINK) { + if (conn->type == CIS_LINK) { /* BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E * page 1857: * @@ -5462,9 +5490,10 @@ static int hci_connect_cancel_sync(struct hci_dev *hdev, struct hci_conn *conn, return hci_disconnect_sync(hdev, conn, reason); /* CIS with no Create CIS sent have nothing to cancel */ - if (bacmp(&conn->dst, BDADDR_ANY)) - return HCI_ERROR_LOCAL_HOST_TERM; + return HCI_ERROR_LOCAL_HOST_TERM; + } + if (conn->type == BIS_LINK) { /* There is no way to cancel a BIS without terminating the BIG * which is done later on connection cleanup. */ @@ -5526,9 +5555,12 @@ static int hci_reject_conn_sync(struct hci_dev *hdev, struct hci_conn *conn, { struct hci_cp_reject_conn_req cp; - if (conn->type == ISO_LINK) + if (conn->type == CIS_LINK) return hci_le_reject_cis_sync(hdev, conn, reason); + if (conn->type == BIS_LINK) + return -EINVAL; + if (conn->type == SCO_LINK || conn->type == ESCO_LINK) return hci_reject_sco_sync(hdev, conn, reason); @@ -6867,3 +6899,182 @@ int hci_le_conn_update_sync(struct hci_dev *hdev, struct hci_conn *conn, return __hci_cmd_sync_status(hdev, HCI_OP_LE_CONN_UPDATE, sizeof(cp), &cp, HCI_CMD_TIMEOUT); } + +static void create_pa_complete(struct hci_dev *hdev, void *data, int err) +{ + struct hci_conn *conn = data; + struct hci_conn *pa_sync; + + bt_dev_dbg(hdev, "err %d", err); + + if (err == -ECANCELED) + return; + + hci_dev_lock(hdev); + + hci_dev_clear_flag(hdev, HCI_PA_SYNC); + + if (!hci_conn_valid(hdev, conn)) + clear_bit(HCI_CONN_CREATE_PA_SYNC, &conn->flags); + + if (!err) + goto unlock; + + /* Add connection to indicate PA sync error */ + pa_sync = hci_conn_add_unset(hdev, BIS_LINK, BDADDR_ANY, + HCI_ROLE_SLAVE); + + if (IS_ERR(pa_sync)) + goto unlock; + + set_bit(HCI_CONN_PA_SYNC_FAILED, &pa_sync->flags); + + /* Notify iso layer */ + hci_connect_cfm(pa_sync, bt_status(err)); + +unlock: + hci_dev_unlock(hdev); +} + +static int hci_le_pa_create_sync(struct hci_dev *hdev, void *data) +{ + struct hci_cp_le_pa_create_sync cp; + struct hci_conn *conn = data; + struct bt_iso_qos *qos = &conn->iso_qos; + int err; + + if (!hci_conn_valid(hdev, conn)) + return -ECANCELED; + + if (conn->sync_handle != HCI_SYNC_HANDLE_INVALID) + return -EINVAL; + + if (hci_dev_test_and_set_flag(hdev, HCI_PA_SYNC)) + return -EBUSY; + + /* Stop scanning if SID has not been set and active scanning is enabled + * so we use passive scanning which will be scanning using the allow + * list programmed to contain only the connection address. + */ + if (conn->sid == HCI_SID_INVALID && + hci_dev_test_flag(hdev, HCI_LE_SCAN)) { + hci_scan_disable_sync(hdev); + hci_dev_set_flag(hdev, HCI_LE_SCAN_INTERRUPTED); + hci_discovery_set_state(hdev, DISCOVERY_STOPPED); + } + + /* Mark HCI_CONN_CREATE_PA_SYNC so hci_update_passive_scan_sync can + * program the address in the allow list so PA advertisements can be + * received. + */ + set_bit(HCI_CONN_CREATE_PA_SYNC, &conn->flags); + + hci_update_passive_scan_sync(hdev); + + /* SID has not been set listen for HCI_EV_LE_EXT_ADV_REPORT to update + * it. + */ + if (conn->sid == HCI_SID_INVALID) + __hci_cmd_sync_status_sk(hdev, HCI_OP_NOP, 0, NULL, + HCI_EV_LE_EXT_ADV_REPORT, + conn->conn_timeout, NULL); + + memset(&cp, 0, sizeof(cp)); + cp.options = qos->bcast.options; + cp.sid = conn->sid; + cp.addr_type = conn->dst_type; + bacpy(&cp.addr, &conn->dst); + cp.skip = cpu_to_le16(qos->bcast.skip); + cp.sync_timeout = cpu_to_le16(qos->bcast.sync_timeout); + cp.sync_cte_type = qos->bcast.sync_cte_type; + + /* The spec allows only one pending LE Periodic Advertising Create + * Sync command at a time so we forcefully wait for PA Sync Established + * event since cmd_work can only schedule one command at a time. + * + * BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E + * page 2493: + * + * If the Host issues this command when another HCI_LE_Periodic_ + * Advertising_Create_Sync command is pending, the Controller shall + * return the error code Command Disallowed (0x0C). + */ + err = __hci_cmd_sync_status_sk(hdev, HCI_OP_LE_PA_CREATE_SYNC, + sizeof(cp), &cp, + HCI_EV_LE_PA_SYNC_ESTABLISHED, + conn->conn_timeout, NULL); + if (err == -ETIMEDOUT) + __hci_cmd_sync_status(hdev, HCI_OP_LE_PA_CREATE_SYNC_CANCEL, + 0, NULL, HCI_CMD_TIMEOUT); + + return err; +} + +int hci_connect_pa_sync(struct hci_dev *hdev, struct hci_conn *conn) +{ + return hci_cmd_sync_queue_once(hdev, hci_le_pa_create_sync, conn, + create_pa_complete); +} + +static void create_big_complete(struct hci_dev *hdev, void *data, int err) +{ + struct hci_conn *conn = data; + + bt_dev_dbg(hdev, "err %d", err); + + if (err == -ECANCELED) + return; + + if (hci_conn_valid(hdev, conn)) + clear_bit(HCI_CONN_CREATE_BIG_SYNC, &conn->flags); +} + +static int hci_le_big_create_sync(struct hci_dev *hdev, void *data) +{ + DEFINE_FLEX(struct hci_cp_le_big_create_sync, cp, bis, num_bis, 0x11); + struct hci_conn *conn = data; + struct bt_iso_qos *qos = &conn->iso_qos; + int err; + + if (!hci_conn_valid(hdev, conn)) + return -ECANCELED; + + set_bit(HCI_CONN_CREATE_BIG_SYNC, &conn->flags); + + memset(cp, 0, sizeof(*cp)); + cp->handle = qos->bcast.big; + cp->sync_handle = cpu_to_le16(conn->sync_handle); + cp->encryption = qos->bcast.encryption; + memcpy(cp->bcode, qos->bcast.bcode, sizeof(cp->bcode)); + cp->mse = qos->bcast.mse; + cp->timeout = cpu_to_le16(qos->bcast.timeout); + cp->num_bis = conn->num_bis; + memcpy(cp->bis, conn->bis, conn->num_bis); + + /* The spec allows only one pending LE BIG Create Sync command at + * a time, so we forcefully wait for BIG Sync Established event since + * cmd_work can only schedule one command at a time. + * + * BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E + * page 2586: + * + * If the Host sends this command when the Controller is in the + * process of synchronizing to any BIG, i.e. the HCI_LE_BIG_Sync_ + * Established event has not been generated, the Controller shall + * return the error code Command Disallowed (0x0C). + */ + err = __hci_cmd_sync_status_sk(hdev, HCI_OP_LE_BIG_CREATE_SYNC, + struct_size(cp, bis, cp->num_bis), cp, + HCI_EVT_LE_BIG_SYNC_ESTABLISHED, + conn->conn_timeout, NULL); + if (err == -ETIMEDOUT) + hci_le_big_terminate_sync(hdev, cp->handle); + + return err; +} + +int hci_connect_big_sync(struct hci_dev *hdev, struct hci_conn *conn) +{ + return hci_cmd_sync_queue_once(hdev, hci_le_big_create_sync, conn, + create_big_complete); +} |