0 files changed, 0 insertions, 0 deletions
diff --git a/arch/.gitignore b/arch/.gitignore
index 741468920320..756c19c34f99 100644
--- a/arch/.gitignore
+++ b/arch/.gitignore
@@ -1,2 +1,3 @@
-i386
-x86_64
+# SPDX-License-Identifier: GPL-2.0-only
+/i386/
+/x86_64/
diff --git a/arch/Kconfig b/arch/Kconfig
index 05d7a8a458d5..31220f512b16 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -1,44 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # General architecture dependent options
 #
 
-config OPROFILE
-	tristate "OProfile system profiling"
-	depends on PROFILING
-	depends on HAVE_OPROFILE
-	select RING_BUFFER
-	select RING_BUFFER_ALLOW_SWAP
+#
+# Note: arch/$(SRCARCH)/Kconfig needs to be included first so that it can
+# override the default values in this file.
+#
+source "arch/$(SRCARCH)/Kconfig"
+
+config ARCH_CONFIGURES_CPU_MITIGATIONS
+	bool
+
+if !ARCH_CONFIGURES_CPU_MITIGATIONS
+config CPU_MITIGATIONS
+	def_bool y
+endif
+
+#
+# Selected by architectures that need custom DMA operations for e.g. legacy
+# IOMMUs not handled by dma-iommu.  Drivers must never select this symbol.
+#
+config ARCH_HAS_DMA_OPS
+	depends on HAS_DMA
+	select DMA_OPS_HELPERS
+	bool
+
+menu "General architecture-dependent options"
+
+config ARCH_HAS_SUBPAGE_FAULTS
+	bool
 	help
-	  OProfile is a profiling system capable of profiling the
-	  whole system, include the kernel, kernel modules, libraries,
-	  and applications.
+	  Select if the architecture can check permissions at sub-page
+	  granularity (e.g. arm64 MTE). The probe_user_*() functions
+	  must be implemented.
 
-	  If unsure, say N.
+config HOTPLUG_SMT
+	bool
 
-config OPROFILE_EVENT_MULTIPLEX
-	bool "OProfile multiplexing support (EXPERIMENTAL)"
-	default n
-	depends on OPROFILE && X86
+config SMT_NUM_THREADS_DYNAMIC
+	bool
+
+config ARCH_SUPPORTS_SCHED_SMT
+	bool
+
+config ARCH_SUPPORTS_SCHED_CLUSTER
+	bool
+
+config ARCH_SUPPORTS_SCHED_MC
+	bool
+
+config SCHED_SMT
+	bool "SMT (Hyperthreading) scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_SMT
+	default y
 	help
-	  The number of hardware counters is limited. The multiplexing
-	  feature enables OProfile to gather more events than counters
-	  are provided by the hardware. This is realized by switching
-	  between events at an user specified time interval.
+	  Improves the CPU scheduler's decision making when dealing with
+	  MultiThreading at a cost of slightly increased overhead in some
+	  places. If unsure say N here.
+
+config SCHED_CLUSTER
+	bool "Cluster scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_CLUSTER
+	default y
+	help
+	  Cluster scheduler support improves the CPU scheduler's decision
+	  making when dealing with machines that have clusters of CPUs.
+	  Cluster usually means a couple of CPUs which are placed closely
+	  by sharing mid-level caches, last-level cache tags or internal
+	  busses.
+
+config SCHED_MC
+	bool "Multi-Core Cache (MC) scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_MC
+	default y
+	help
+	  Multi-core scheduler support improves the CPU scheduler's decision
+	  making when dealing with multi-core CPU chips at a cost of slightly
+	  increased overhead in some places. If unsure say N here.
 
-	  If unsure, say N.
+# Selected by HOTPLUG_CORE_SYNC_DEAD or HOTPLUG_CORE_SYNC_FULL
+config HOTPLUG_CORE_SYNC
+	bool
 
-config HAVE_OPROFILE
+# Basic CPU dead synchronization selected by architecture
+config HOTPLUG_CORE_SYNC_DEAD
 	bool
+	select HOTPLUG_CORE_SYNC
 
-config OPROFILE_NMI_TIMER
-	def_bool y
-	depends on PERF_EVENTS && HAVE_PERF_EVENTS_NMI
+# Full CPU synchronization with alive state selected by architecture
+config HOTPLUG_CORE_SYNC_FULL
+	bool
+	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
+	select HOTPLUG_CORE_SYNC
+
+config HOTPLUG_SPLIT_STARTUP
+	bool
+	select HOTPLUG_CORE_SYNC_FULL
+
+config HOTPLUG_PARALLEL
+	bool
+	select HOTPLUG_SPLIT_STARTUP
+
+config GENERIC_IRQ_ENTRY
+	bool
+
+config GENERIC_SYSCALL
+	bool
+	depends on GENERIC_IRQ_ENTRY
+
+config GENERIC_ENTRY
+	bool
+	select GENERIC_IRQ_ENTRY
+	select GENERIC_SYSCALL
 
 config KPROBES
 	bool "Kprobes"
-	depends on MODULES
 	depends on HAVE_KPROBES
 	select KALLSYMS
+	select EXECMEM
+	select NEED_TASKS_RCU
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes
@@ -47,47 +128,61 @@ config KPROBES
 	  If in doubt, say "N".
 
 config JUMP_LABEL
-       bool "Optimize very unlikely/likely branches"
-       depends on HAVE_ARCH_JUMP_LABEL
-       help
-         This option enables a transparent branch optimization that
-	 makes certain almost-always-true or almost-always-false branch
-	 conditions even cheaper to execute within the kernel.
-
-	 Certain performance-sensitive kernel code, such as trace points,
-	 scheduler functionality, networking code and KVM have such
-	 branches and include support for this optimization technique.
-
-         If it is detected that the compiler has support for "asm goto",
-	 the kernel will compile such branches with just a nop
-	 instruction. When the condition flag is toggled to true, the
-	 nop will be converted to a jump instruction to execute the
-	 conditional block of instructions.
-
-	 This technique lowers overhead and stress on the branch prediction
-	 of the processor and generally makes the kernel faster. The update
-	 of the condition is slower, but those are always very rare.
-
-	 ( On 32-bit x86, the necessary options added to the compiler
-	   flags may increase the size of the kernel slightly. )
+	bool "Optimize very unlikely/likely branches"
+	depends on HAVE_ARCH_JUMP_LABEL
+	select OBJTOOL if HAVE_JUMP_LABEL_HACK
+	help
+	  This option enables a transparent branch optimization that
+	  makes certain almost-always-true or almost-always-false branch
+	  conditions even cheaper to execute within the kernel.
+
+	  Certain performance-sensitive kernel code, such as trace points,
+	  scheduler functionality, networking code and KVM have such
+	  branches and include support for this optimization technique.
+
+	  If it is detected that the compiler has support for "asm goto",
+	  the kernel will compile such branches with just a nop
+	  instruction. When the condition flag is toggled to true, the
+	  nop will be converted to a jump instruction to execute the
+	  conditional block of instructions.
+
+	  This technique lowers overhead and stress on the branch prediction
+	  of the processor and generally makes the kernel faster. The update
+	  of the condition is slower, but those are always very rare.
+
+	  ( On 32-bit x86, the necessary options added to the compiler
+	    flags may increase the size of the kernel slightly. )
+
+config STATIC_KEYS_SELFTEST
+	bool "Static key selftest"
+	depends on JUMP_LABEL
+	help
+	  Boot time self-test of the branch patching code.
+
+config STATIC_CALL_SELFTEST
+	bool "Static call selftest"
+	depends on HAVE_STATIC_CALL
+	help
+	  Boot time self-test of the call patching code.
 
 config OPTPROBES
 	def_bool y
 	depends on KPROBES && HAVE_OPTPROBES
-	depends on !PREEMPT
+	select NEED_TASKS_RCU
 
 config KPROBES_ON_FTRACE
 	def_bool y
 	depends on KPROBES && HAVE_KPROBES_ON_FTRACE
 	depends on DYNAMIC_FTRACE_WITH_REGS
 	help
-	 If function tracer is enabled and the arch supports full
-	 passing of pt_regs to function tracing, then kprobes can
-	 optimize on top of function tracing.
+	  If function tracer is enabled and the arch supports full
+	  passing of pt_regs to function tracing, then kprobes can
+	  optimize on top of function tracing.
 
 config UPROBES
 	def_bool n
-	select PERCPU_RWSEM
+	depends on ARCH_SUPPORTS_UPROBES
+	select TASKS_TRACE_RCU
 	help
 	  Uprobes is the user-space counterpart to kprobes: they
 	  enable instrumentation applications (such as 'perf probe')
@@ -112,8 +207,8 @@ config HAVE_64BIT_ALIGNED_ACCESS
 	  accesses are required to be 64 bit aligned in this way even
 	  though it is not a 64 bit architecture.
 
-	  See Documentation/unaligned-memory-access.txt for more
-	  information on the topic of unaligned memory accesses.
+	  See Documentation/core-api/unaligned-memory-access.rst for
+	  more information on the topic of unaligned memory accesses.
 
 config HAVE_EFFICIENT_UNALIGNED_ACCESS
 	bool
@@ -131,31 +226,34 @@ config HAVE_EFFICIENT_UNALIGNED_ACCESS
 	  problems with received packets if doing so would not help
 	  much.
 
-	  See Documentation/unaligned-memory-access.txt for more
+	  See Documentation/core-api/unaligned-memory-access.rst for more
 	  information on the topic of unaligned memory accesses.
 
 config ARCH_USE_BUILTIN_BSWAP
-       bool
-       help
-	 Modern versions of GCC (since 4.4) have builtin functions
-	 for handling byte-swapping. Using these, instead of the old
-	 inline assembler that the architecture code provides in the
-	 __arch_bswapXX() macros, allows the compiler to see what's
-	 happening and offers more opportunity for optimisation. In
-	 particular, the compiler will be able to combine the byteswap
-	 with a nearby load or store and use load-and-swap or
-	 store-and-swap instructions if the architecture has them. It
-	 should almost *never* result in code which is worse than the
-	 hand-coded assembler in <asm/swab.h>.  But just in case it
-	 does, the use of the builtins is optional.
-
-	 Any architecture with load-and-swap or store-and-swap
-	 instructions should set this. And it shouldn't hurt to set it
-	 on architectures that don't have such instructions.
+	bool
+	help
+	  GCC and Clang have builtin functions for handling byte-swapping.
+	  Using these allows the compiler to see what's happening and
+	  offers more opportunity for optimisation. In particular, the
+	  compiler will be able to combine the byteswap with a nearby load
+	  or store and use load-and-swap or store-and-swap instructions if
+	  the architecture has them. It should almost *never* result in code
+	  which is worse than the hand-coded assembler in <asm/swab.h>.
+	  But just in case it does, the use of the builtins is optional.
+
+	  Any architecture with load-and-swap or store-and-swap
+	  instructions should set this. And it shouldn't hurt to set it
+	  on architectures that don't have such instructions.
 
 config KRETPROBES
 	def_bool y
-	depends on KPROBES && HAVE_KRETPROBES
+	depends on KPROBES && (HAVE_KRETPROBES || HAVE_RETHOOK)
+
+config KRETPROBE_ON_RETHOOK
+	def_bool y
+	depends on HAVE_RETHOOK
+	depends on KRETPROBES
+	select RETHOOK
 
 config USER_RETURN_NOTIFIER
 	bool
@@ -179,8 +277,29 @@ config HAVE_OPTPROBES
 config HAVE_KPROBES_ON_FTRACE
 	bool
 
-config HAVE_NMI_WATCHDOG
+config ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
+	bool
+	help
+	  Since kretprobes modifies return address on the stack, the
+	  stacktrace may see the kretprobe trampoline address instead
+	  of correct one. If the architecture stacktrace code and
+	  unwinder can adjust such entries, select this configuration.
+
+config HAVE_FUNCTION_ERROR_INJECTION
+	bool
+
+config HAVE_NMI
 	bool
+
+config HAVE_FUNCTION_DESCRIPTORS
+	bool
+
+config TRACE_IRQFLAGS_SUPPORT
+	bool
+
+config TRACE_IRQFLAGS_NMI_SUPPORT
+	bool
+
 #
 # An arch should select this if it provides all these things:
 #
@@ -190,53 +309,134 @@ config HAVE_NMI_WATCHDOG
 #	asm/syscall.h		supplying asm-generic/syscall.h interface
 #	linux/regset.h		user_regset interfaces
 #	CORE_DUMP_USE_REGSET	#define'd in linux/elf.h
-#	TIF_SYSCALL_TRACE	calls tracehook_report_syscall_{entry,exit}
-#	TIF_NOTIFY_RESUME	calls tracehook_notify_resume()
-#	signal delivery		calls tracehook_signal_handler()
+#	TIF_SYSCALL_TRACE	calls ptrace_report_syscall_{entry,exit}
+#	TIF_NOTIFY_RESUME	calls resume_user_mode_work()
 #
 config HAVE_ARCH_TRACEHOOK
 	bool
 
-config HAVE_DMA_ATTRS
-	bool
-
 config HAVE_DMA_CONTIGUOUS
 	bool
 
 config GENERIC_SMP_IDLE_THREAD
-       bool
+	bool
 
 config GENERIC_IDLE_POLL_SETUP
-       bool
+	bool
 
-# Select if arch init_task initializer is different to init/init_task.c
-config ARCH_INIT_TASK
-       bool
+config ARCH_HAS_FORTIFY_SOURCE
+	bool
+	help
+	  An architecture should select this when it can successfully
+	  build and run with CONFIG_FORTIFY_SOURCE.
+
+#
+# Select if the arch provides a historic keepinit alias for the retain_initrd
+# command line option
+#
+config ARCH_HAS_KEEPINITRD
+	bool
+
+# Select if arch has all set_memory_ro/rw/x/nx() functions in asm/cacheflush.h
+config ARCH_HAS_SET_MEMORY
+	bool
+
+# Select if arch has all set_direct_map_invalid/default() functions
+config ARCH_HAS_SET_DIRECT_MAP
+	bool
 
-# Select if arch has its private alloc_task_struct() function
-config ARCH_TASK_STRUCT_ALLOCATOR
+#
+# Select if the architecture provides the arch_dma_set_uncached symbol to
+# either provide an uncached segment alias for a DMA allocation, or
+# to remap the page tables in place.
+#
+config ARCH_HAS_DMA_SET_UNCACHED
+	bool
+
+#
+# Select if the architectures provides the arch_dma_clear_uncached symbol
+# to undo an in-place page table remap for uncached access.
+#
+config ARCH_HAS_DMA_CLEAR_UNCACHED
+	bool
+
+config ARCH_HAS_CPU_FINALIZE_INIT
 	bool
 
-# Select if arch has its private alloc_thread_info() function
-config ARCH_THREAD_INFO_ALLOCATOR
+# The architecture has a per-task state that includes the mm's PASID
+config ARCH_HAS_CPU_PASID
 	bool
+	select IOMMU_MM_DATA
+
+config HAVE_ARCH_THREAD_STRUCT_WHITELIST
+	bool
+	help
+	  An architecture should select this to provide hardened usercopy
+	  knowledge about what region of the thread_struct should be
+	  whitelisted for copying to userspace. Normally this is only the
+	  FPU registers. Specifically, arch_thread_struct_whitelist()
+	  should be implemented. Without this, the entire thread_struct
+	  field in task_struct will be left whitelisted.
+
+# Select if arch wants to size task_struct dynamically via arch_task_struct_size:
+config ARCH_WANTS_DYNAMIC_TASK_STRUCT
+	bool
+
+config ARCH_WANTS_NO_INSTR
+	bool
+	help
+	  An architecture should select this if the noinstr macro is being used on
+	  functions to denote that the toolchain should avoid instrumenting such
+	  functions and is required for correctness.
+
+config ARCH_32BIT_OFF_T
+	bool
+	depends on !64BIT
+	help
+	  All new 32-bit architectures should have 64-bit off_t type on
+	  userspace side which corresponds to the loff_t kernel type. This
+	  is the requirement for modern ABIs. Some existing architectures
+	  still support 32-bit off_t. This option is enabled for all such
+	  architectures explicitly.
+
+# Selected by 64 bit architectures which have a 32 bit f_tinode in struct ustat
+config ARCH_32BIT_USTAT_F_TINODE
+	bool
+
+config HAVE_ASM_MODVERSIONS
+	bool
+	help
+	  This symbol should be selected by an architecture if it provides
+	  <asm/asm-prototypes.h> to support the module versioning for symbols
+	  exported from assembly code.
 
 config HAVE_REGS_AND_STACK_ACCESS_API
 	bool
 	help
-	  This symbol should be selected by an architecure if it supports
+	  This symbol should be selected by an architecture if it supports
 	  the API needed to access registers and stack entries from pt_regs,
 	  declared in asm/ptrace.h
 	  For example the kprobes-based event tracer needs this API.
 
-config HAVE_CLK
+config HAVE_RSEQ
+	bool
+	depends on HAVE_REGS_AND_STACK_ACCESS_API
+	help
+	  This symbol should be selected by an architecture if it
+	  supports an implementation of restartable sequences.
+
+config HAVE_RUST
 	bool
 	help
-	  The <linux/clk.h> calls support software clock gating and
-	  thus are a key power management tool on many systems.
+	  This symbol should be selected by an architecture if it
+	  supports Rust.
 
-config HAVE_DMA_API_DEBUG
+config HAVE_FUNCTION_ARG_ACCESS_API
 	bool
+	help
+	  This symbol should be selected by an architecture if it supports
+	  the API needed to access function arguments from pt_regs,
+	  declared in asm/ptrace.h
 
 config HAVE_HW_BREAKPOINT
 	bool
@@ -263,6 +463,29 @@ config HAVE_PERF_EVENTS_NMI
 	  subsystem.  Also has support for calculating CPU cycle events
 	  to determine how many clock cycles in a given period.
 
+config HAVE_HARDLOCKUP_DETECTOR_PERF
+	bool
+	depends on HAVE_PERF_EVENTS_NMI
+	help
+	  The arch chooses to use the generic perf-NMI-based hardlockup
+	  detector. Must define HAVE_PERF_EVENTS_NMI.
+
+config HAVE_HARDLOCKUP_DETECTOR_ARCH
+	bool
+	help
+	  The arch provides its own hardlockup detector implementation instead
+	  of the generic ones.
+
+	  It uses the same command line parameters, and sysctl interface,
+	  as the generic hardlockup detectors.
+
+config UNWIND_USER
+	bool
+
+config HAVE_UNWIND_USER_FP
+	bool
+	select UNWIND_USER
+
 config HAVE_PERF_REGS
 	bool
 	help
@@ -279,12 +502,87 @@ config HAVE_PERF_USER_STACK_DUMP
 config HAVE_ARCH_JUMP_LABEL
 	bool
 
-config HAVE_RCU_TABLE_FREE
+config HAVE_ARCH_JUMP_LABEL_RELATIVE
+	bool
+
+config MMU_GATHER_TABLE_FREE
+	bool
+
+config MMU_GATHER_RCU_TABLE_FREE
+	bool
+	select MMU_GATHER_TABLE_FREE
+
+config MMU_GATHER_PAGE_SIZE
+	bool
+
+config MMU_GATHER_NO_RANGE
+	bool
+	select MMU_GATHER_MERGE_VMAS
+
+config MMU_GATHER_NO_FLUSH_CACHE
+	bool
+
+config MMU_GATHER_MERGE_VMAS
+	bool
+
+config MMU_GATHER_NO_GATHER
+	bool
+	depends on MMU_GATHER_TABLE_FREE
+
+config ARCH_WANT_IRQS_OFF_ACTIVATE_MM
+	bool
+	help
+	  Temporary select until all architectures can be converted to have
+	  irqs disabled over activate_mm. Architectures that do IPI based TLB
+	  shootdowns should enable this.
+
+# Use normal mm refcounting for MMU_LAZY_TLB kernel thread references.
+# MMU_LAZY_TLB_REFCOUNT=n can improve the scalability of context switching
+# to/from kernel threads when the same mm is running on a lot of CPUs (a large
+# multi-threaded application), by reducing contention on the mm refcount.
+#
+# This can be disabled if the architecture ensures no CPUs are using an mm as a
+# "lazy tlb" beyond its final refcount (i.e., by the time __mmdrop frees the mm
+# or its kernel page tables). This could be arranged by arch_exit_mmap(), or
+# final exit(2) TLB flush, for example.
+#
+# To implement this, an arch *must*:
+# Ensure the _lazy_tlb variants of mmgrab/mmdrop are used when manipulating
+# the lazy tlb reference of a kthread's ->active_mm (non-arch code has been
+# converted already).
+config MMU_LAZY_TLB_REFCOUNT
+	def_bool y
+	depends on !MMU_LAZY_TLB_SHOOTDOWN
+
+# This option allows MMU_LAZY_TLB_REFCOUNT=n. It ensures no CPUs are using an
+# mm as a lazy tlb beyond its last reference count, by shooting down these
+# users before the mm is deallocated. __mmdrop() first IPIs all CPUs that may
+# be using the mm as a lazy tlb, so that they may switch themselves to using
+# init_mm for their active mm. mm_cpumask(mm) is used to determine which CPUs
+# may be using mm as a lazy tlb mm.
+#
+# To implement this, an arch *must*:
+# - At the time of the final mmdrop of the mm, ensure mm_cpumask(mm) contains
+#   at least all possible CPUs in which the mm is lazy.
+# - It must meet the requirements for MMU_LAZY_TLB_REFCOUNT=n (see above).
+config MMU_LAZY_TLB_SHOOTDOWN
 	bool
 
 config ARCH_HAVE_NMI_SAFE_CMPXCHG
 	bool
 
+config ARCH_HAVE_EXTRA_ELF_NOTES
+	bool
+	help
+	  An architecture should select this in order to enable adding an
+	  arch-specific ELF note section to core files. It must provide two
+	  functions: elf_coredump_extra_notes_size() and
+	  elf_coredump_extra_notes_write() which are invoked by the ELF core
+	  dumper.
+
+config ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
+	bool
+
 config HAVE_ALIGNED_STRUCT_PAGE
 	bool
 	help
@@ -299,6 +597,9 @@ config HAVE_CMPXCHG_LOCAL
 config HAVE_CMPXCHG_DOUBLE
 	bool
 
+config ARCH_WEAK_RELEASE_ACQUIRE
+	bool
+
 config ARCH_WANT_IPC_PARSE_VERSION
 	bool
 
@@ -309,10 +610,23 @@ config ARCH_WANT_OLD_COMPAT_IPC
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
 	bool
 
+config HAVE_ARCH_SECCOMP
+	bool
+	help
+	  An arch should select this symbol to support seccomp mode 1 (the fixed
+	  syscall policy), and must provide an overrides for __NR_seccomp_sigreturn,
+	  and compat syscalls if the asm-generic/seccomp.h defaults need adjustment:
+	  - __NR_seccomp_read_32
+	  - __NR_seccomp_write_32
+	  - __NR_seccomp_exit_32
+	  - __NR_seccomp_sigreturn_32
+
 config HAVE_ARCH_SECCOMP_FILTER
 	bool
+	select HAVE_ARCH_SECCOMP
 	help
 	  An arch should select this symbol if it provides all of these things:
+	  - all the requirements for HAVE_ARCH_SECCOMP
 	  - syscall_get_arch()
 	  - syscall_get_arguments()
 	  - syscall_rollback()
@@ -322,17 +636,26 @@ config HAVE_ARCH_SECCOMP_FILTER
 	  - secure_computing return value is checked and a return value of -1
 	    results in the system call being skipped immediately.
 	  - seccomp syscall wired up
+	  - if !HAVE_SPARSE_SYSCALL_NR, have SECCOMP_ARCH_NATIVE,
+	    SECCOMP_ARCH_NATIVE_NR, SECCOMP_ARCH_NATIVE_NAME defined. If
+	    COMPAT is supported, have the SECCOMP_ARCH_COMPAT* defines too.
 
-	  For best performance, an arch should use seccomp_phase1 and
-	  seccomp_phase2 directly.  It should call seccomp_phase1 for all
-	  syscalls if TIF_SECCOMP is set, but seccomp_phase1 does not
-	  need to be called from a ptrace-safe context.  It must then
-	  call seccomp_phase2 if seccomp_phase1 returns anything other
-	  than SECCOMP_PHASE1_OK or SECCOMP_PHASE1_SKIP.
-
-	  As an additional optimization, an arch may provide seccomp_data
-	  directly to seccomp_phase1; this avoids multiple calls
-	  to the syscall_xyz helpers for every syscall.
+config SECCOMP
+	prompt "Enable seccomp to safely execute untrusted bytecode"
+	def_bool y
+	depends on HAVE_ARCH_SECCOMP
+	help
+	  This kernel feature is useful for number crunching applications
+	  that may need to handle untrusted bytecode during their
+	  execution. By using pipes or other transports made available
+	  to the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in their
+	  own address space using seccomp. Once seccomp is enabled via
+	  prctl(PR_SET_SECCOMP) or the seccomp() syscall, it cannot be
+	  disabled and the task is only allowed to execute a few safe
+	  syscalls defined by each seccomp mode.
+
+	  If unsure, say Y.
 
 config SECCOMP_FILTER
 	def_bool y
@@ -342,25 +665,40 @@ config SECCOMP_FILTER
 	  in terms of Berkeley Packet Filter programs which implement
 	  task-defined system call filtering polices.
 
-	  See Documentation/prctl/seccomp_filter.txt for details.
+	  See Documentation/userspace-api/seccomp_filter.rst for details.
+
+config SECCOMP_CACHE_DEBUG
+	bool "Show seccomp filter cache status in /proc/pid/seccomp_cache"
+	depends on SECCOMP_FILTER && !HAVE_SPARSE_SYSCALL_NR
+	depends on PROC_FS
+	help
+	  This enables the /proc/pid/seccomp_cache interface to monitor
+	  seccomp cache data. The file format is subject to change. Reading
+	  the file requires CAP_SYS_ADMIN.
+
+	  This option is for debugging only. Enabling presents the risk that
+	  an adversary may be able to infer the seccomp filter logic.
+
+	  If unsure, say N.
 
-config HAVE_CC_STACKPROTECTOR
+config HAVE_ARCH_KSTACK_ERASE
 	bool
 	help
-	  An arch should select this symbol if:
-	  - its compiler supports the -fstack-protector option
-	  - it has implemented a stack canary (e.g. __stack_chk_guard)
+	  An architecture should select this if it has the code which
+	  fills the used part of the kernel stack with the KSTACK_ERASE_POISON
+	  value before returning from system calls.
 
-config CC_STACKPROTECTOR
-	def_bool n
+config HAVE_STACKPROTECTOR
+	bool
 	help
-	  Set when a stack-protector mode is enabled, so that the build
-	  can enable kernel-side support for the GCC feature.
+	  An arch should select this symbol if:
+	  - it has implemented a stack canary (e.g. __stack_chk_guard)
 
-choice
-	prompt "Stack Protector buffer overflow detection"
-	depends on HAVE_CC_STACKPROTECTOR
-	default CC_STACKPROTECTOR_NONE
+config STACKPROTECTOR
+	bool "Stack Protector buffer overflow detection"
+	depends on HAVE_STACKPROTECTOR
+	depends on $(cc-option,-fstack-protector)
+	default y
 	help
 	  This option turns on the "stack-protector" GCC feature. This
 	  feature puts, at the beginning of functions, a canary value on
@@ -370,15 +708,6 @@ choice
 	  overwrite the canary, which gets detected and the attack is then
 	  neutralized via a kernel panic.
 
-config CC_STACKPROTECTOR_NONE
-	bool "None"
-	help
-	  Disable "stack-protector" GCC feature.
-
-config CC_STACKPROTECTOR_REGULAR
-	bool "Regular"
-	select CC_STACKPROTECTOR
-	help
 	  Functions will have the stack-protector canary logic added if they
 	  have an 8-byte or larger character array on the stack.
 
@@ -389,9 +718,11 @@ config CC_STACKPROTECTOR_REGULAR
 	  about 3% of all kernel functions, which increases kernel code size
 	  by about 0.3%.
 
-config CC_STACKPROTECTOR_STRONG
-	bool "Strong"
-	select CC_STACKPROTECTOR
+config STACKPROTECTOR_STRONG
+	bool "Strong Stack Protector"
+	depends on STACKPROTECTOR
+	depends on $(cc-option,-fstack-protector-strong)
+	default y
 	help
 	  Functions will have the stack-protector canary logic added in any
 	  of the following conditions:
@@ -409,22 +740,305 @@ config CC_STACKPROTECTOR_STRONG
 	  about 20% of all kernel functions, which increases the kernel code
 	  size by about 2%.
 
+config ARCH_SUPPORTS_SHADOW_CALL_STACK
+	bool
+	help
+	  An architecture should select this if it supports the compiler's
+	  Shadow Call Stack and implements runtime support for shadow stack
+	  switching.
+
+config SHADOW_CALL_STACK
+	bool "Shadow Call Stack"
+	depends on ARCH_SUPPORTS_SHADOW_CALL_STACK
+	depends on DYNAMIC_FTRACE_WITH_ARGS || DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
+	depends on MMU
+	help
+	  This option enables the compiler's Shadow Call Stack, which
+	  uses a shadow stack to protect function return addresses from
+	  being overwritten by an attacker. More information can be found
+	  in the compiler's documentation:
+
+	  - Clang: https://clang.llvm.org/docs/ShadowCallStack.html
+	  - GCC: https://gcc.gnu.org/onlinedocs/gcc/Instrumentation-Options.html#Instrumentation-Options
+
+	  Note that security guarantees in the kernel differ from the
+	  ones documented for user space. The kernel must store addresses
+	  of shadow stacks in memory, which means an attacker capable of
+	  reading and writing arbitrary memory may be able to locate them
+	  and hijack control flow by modifying the stacks.
+
+config DYNAMIC_SCS
+	bool
+	help
+	  Set by the arch code if it relies on code patching to insert the
+	  shadow call stack push and pop instructions rather than on the
+	  compiler.
+
+config LTO
+	bool
+	help
+	  Selected if the kernel will be built using the compiler's LTO feature.
+
+config LTO_CLANG
+	bool
+	select LTO
+	help
+	  Selected if the kernel will be built using Clang's LTO feature.
+
+config ARCH_SUPPORTS_LTO_CLANG
+	bool
+	help
+	  An architecture should select this option if it supports:
+	  - compiling with Clang,
+	  - compiling inline assembly with Clang's integrated assembler,
+	  - and linking with LLD.
+
+config ARCH_SUPPORTS_LTO_CLANG_THIN
+	bool
+	help
+	  An architecture should select this option if it can support Clang's
+	  ThinLTO mode.
+
+config HAS_LTO_CLANG
+	def_bool y
+	depends on CC_IS_CLANG && LD_IS_LLD && AS_IS_LLVM
+	depends on $(success,$(NM) --help | head -n 1 | grep -qi llvm)
+	depends on $(success,$(AR) --help | head -n 1 | grep -qi llvm)
+	depends on ARCH_SUPPORTS_LTO_CLANG
+	depends on !FTRACE_MCOUNT_USE_RECORDMCOUNT
+	# https://github.com/ClangBuiltLinux/linux/issues/1721
+	depends on (!KASAN || KASAN_HW_TAGS || CLANG_VERSION >= 170000) || !DEBUG_INFO
+	depends on (!KCOV || CLANG_VERSION >= 170000) || !DEBUG_INFO
+	depends on !GCOV_KERNEL
+	help
+	  The compiler and Kconfig options support building with Clang's
+	  LTO.
+
+choice
+	prompt "Link Time Optimization (LTO)"
+	default LTO_NONE
+	help
+	  This option enables Link Time Optimization (LTO), which allows the
+	  compiler to optimize binaries globally.
+
+	  If unsure, select LTO_NONE. Note that LTO is very resource-intensive
+	  so it's disabled by default.
+
+config LTO_NONE
+	bool "None"
+	help
+	  Build the kernel normally, without Link Time Optimization (LTO).
+
+config LTO_CLANG_FULL
+	bool "Clang Full LTO (EXPERIMENTAL)"
+	depends on HAS_LTO_CLANG
+	depends on !COMPILE_TEST
+	select LTO_CLANG
+	help
+	  This option enables Clang's full Link Time Optimization (LTO), which
+	  allows the compiler to optimize the kernel globally. If you enable
+	  this option, the compiler generates LLVM bitcode instead of ELF
+	  object files, and the actual compilation from bitcode happens at
+	  the LTO link step, which may take several minutes depending on the
+	  kernel configuration. More information can be found from LLVM's
+	  documentation:
+
+	    https://llvm.org/docs/LinkTimeOptimization.html
+
+	  During link time, this option can use a large amount of RAM, and
+	  may take much longer than the ThinLTO option.
+
+config LTO_CLANG_THIN
+	bool "Clang ThinLTO (EXPERIMENTAL)"
+	depends on HAS_LTO_CLANG && ARCH_SUPPORTS_LTO_CLANG_THIN
+	select LTO_CLANG
+	help
+	  This option enables Clang's ThinLTO, which allows for parallel
+	  optimization and faster incremental compiles compared to the
+	  CONFIG_LTO_CLANG_FULL option. More information can be found
+	  from Clang's documentation:
+
+	    https://clang.llvm.org/docs/ThinLTO.html
+
+	  If unsure, say Y.
 endchoice
 
-config HAVE_CONTEXT_TRACKING
+config ARCH_SUPPORTS_AUTOFDO_CLANG
+	bool
+
+config AUTOFDO_CLANG
+	bool "Enable Clang's AutoFDO build (EXPERIMENTAL)"
+	depends on ARCH_SUPPORTS_AUTOFDO_CLANG
+	depends on CC_IS_CLANG && CLANG_VERSION >= 170000
+	help
+	  This option enables Clang’s AutoFDO build. When
+	  an AutoFDO profile is specified in variable
+	  CLANG_AUTOFDO_PROFILE during the build process,
+	  Clang uses the profile to optimize the kernel.
+
+	  If no profile is specified, AutoFDO options are
+	  still passed to Clang to facilitate the collection
+	  of perf data for creating an AutoFDO profile in
+	  subsequent builds.
+
+	  If unsure, say N.
+
+config ARCH_SUPPORTS_PROPELLER_CLANG
+	bool
+
+config PROPELLER_CLANG
+	bool "Enable Clang's Propeller build"
+	depends on ARCH_SUPPORTS_PROPELLER_CLANG
+	depends on CC_IS_CLANG && CLANG_VERSION >= 190000
+	help
+	  This option enables Clang’s Propeller build. When the Propeller
+	  profiles is specified in variable CLANG_PROPELLER_PROFILE_PREFIX
+	  during the build process, Clang uses the profiles to optimize
+	  the kernel.
+
+	  If no profile is specified, Propeller options are still passed
+	  to Clang to facilitate the collection of perf data for creating
+	  the Propeller profiles in subsequent builds.
+
+	  If unsure, say N.
+
+config ARCH_SUPPORTS_CFI
+	bool
+	help
+	  An architecture should select this option if it can support Kernel
+	  Control-Flow Integrity (CFI) checking (-fsanitize=kcfi).
+
+config ARCH_USES_CFI_TRAPS
+	bool
+	help
+	  An architecture should select this option if it requires the
+	  .kcfi_traps section for KCFI trap handling.
+
+config ARCH_USES_CFI_GENERIC_LLVM_PASS
+	bool
+	help
+	  An architecture should select this option if it uses the generic
+	  KCFIPass in LLVM to expand kCFI bundles instead of architecture-specific
+	  lowering.
+
+config CFI
+	bool "Use Kernel Control Flow Integrity (kCFI)"
+	default CFI_CLANG
+	depends on ARCH_SUPPORTS_CFI
+	depends on $(cc-option,-fsanitize=kcfi)
+	help
+	  This option enables forward-edge Control Flow Integrity (CFI)
+	  checking, where the compiler injects a runtime check to each
+	  indirect function call to ensure the target is a valid function with
+	  the correct static type. This restricts possible call targets and
+	  makes it more difficult for an attacker to exploit bugs that allow
+	  the modification of stored function pointers. More information can be
+	  found from Clang's documentation:
+
+	    https://clang.llvm.org/docs/ControlFlowIntegrity.html
+
+config CFI_CLANG
+	bool
+	transitional
+	help
+	  Transitional config for CFI_CLANG to CFI migration.
+
+config CFI_ICALL_NORMALIZE_INTEGERS
+	bool "Normalize CFI tags for integers"
+	depends on CFI
+	depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS
+	help
+	  This option normalizes the CFI tags for integer types so that all
+	  integer types of the same size and signedness receive the same CFI
+	  tag.
+
+	  The option is separate from CONFIG_RUST because it affects the ABI.
+	  When working with build systems that care about the ABI, it is
+	  convenient to be able to turn on this flag first, before Rust is
+	  turned on.
+
+	  This option is necessary for using CFI with Rust. If unsure, say N.
+
+config HAVE_CFI_ICALL_NORMALIZE_INTEGERS
+	def_bool y
+	depends on $(cc-option,-fsanitize=kcfi -fsanitize-cfi-icall-experimental-normalize-integers)
+	# With GCOV/KASAN we need this fix: https://github.com/llvm/llvm-project/pull/104826
+	depends on CLANG_VERSION >= 190103 || (!GCOV_KERNEL && !KASAN_GENERIC && !KASAN_SW_TAGS)
+
+config HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC
+	def_bool y
+	depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS
+	depends on RUSTC_VERSION >= 107900
+	depends on ARM64 || X86_64
+	# With GCOV/KASAN we need this fix: https://github.com/rust-lang/rust/pull/129373
+	depends on (RUSTC_LLVM_VERSION >= 190103 && RUSTC_VERSION >= 108200) || \
+		(!GCOV_KERNEL && !KASAN_GENERIC && !KASAN_SW_TAGS)
+
+config CFI_PERMISSIVE
+	bool "Use CFI in permissive mode"
+	depends on CFI
+	help
+	  When selected, Control Flow Integrity (CFI) violations result in a
+	  warning instead of a kernel panic. This option should only be used
+	  for finding indirect call type mismatches during development.
+
+	  If unsure, say N.
+
+config HAVE_ARCH_WITHIN_STACK_FRAMES
+	bool
+	help
+	  An architecture should select this if it can walk the kernel stack
+	  frames to determine if an object is part of either the arguments
+	  or local variables (i.e. that it excludes saved return addresses,
+	  and similar) by implementing an inline arch_within_stack_frames(),
+	  which is used by CONFIG_HARDENED_USERCOPY.
+
+config HAVE_CONTEXT_TRACKING_USER
 	bool
 	help
 	  Provide kernel/user boundaries probes necessary for subsystems
 	  that need it, such as userspace RCU extended quiescent state.
-	  Syscalls need to be wrapped inside user_exit()-user_enter() through
-	  the slow path using TIF_NOHZ flag. Exceptions handlers must be
-	  wrapped as well. Irqs are already protected inside
-	  rcu_irq_enter/rcu_irq_exit() but preemption or signal handling on
-	  irq exit still need to be protected.
+	  Syscalls need to be wrapped inside user_exit()-user_enter(), either
+	  optimized behind static key or through the slow path using TIF_NOHZ
+	  flag. Exceptions handlers must be wrapped as well. Irqs are already
+	  protected inside ct_irq_enter/ct_irq_exit() but preemption or signal
+	  handling on irq exit still need to be protected.
+
+config HAVE_CONTEXT_TRACKING_USER_OFFSTACK
+	bool
+	help
+	  Architecture neither relies on exception_enter()/exception_exit()
+	  nor on schedule_user(). Also preempt_schedule_notrace() and
+	  preempt_schedule_irq() can't be called in a preemptible section
+	  while context tracking is CT_STATE_USER. This feature reflects a sane
+	  entry implementation where the following requirements are met on
+	  critical entry code, ie: before user_exit() or after user_enter():
+
+	  - Critical entry code isn't preemptible (or better yet:
+	    not interruptible).
+	  - No use of RCU read side critical sections, unless ct_nmi_enter()
+	    got called.
+	  - No use of instrumentation, unless instrumentation_begin() got
+	    called.
+
+config HAVE_TIF_NOHZ
+	bool
+	help
+	  Arch relies on TIF_NOHZ and syscall slow path to implement context
+	  tracking calls to user_enter()/user_exit().
 
 config HAVE_VIRT_CPU_ACCOUNTING
 	bool
 
+config HAVE_VIRT_CPU_ACCOUNTING_IDLE
+	bool
+	help
+	  Architecture has its own way to account idle CPU time and therefore
+	  doesn't implement vtime_account_idle().
+
+config ARCH_HAS_SCALED_CPUTIME
+	bool
+
 config HAVE_VIRT_CPU_ACCOUNTING_GEN
 	bool
 	default y if 64BIT
@@ -436,16 +1050,53 @@ config HAVE_VIRT_CPU_ACCOUNTING_GEN
 	  some 32-bit arches may require multiple accesses, so proper
 	  locking is needed to protect against concurrent accesses.
 
-
 config HAVE_IRQ_TIME_ACCOUNTING
 	bool
 	help
 	  Archs need to ensure they use a high enough resolution clock to
 	  support irq time accounting and then call enable_sched_clock_irqtime().
 
+config HAVE_MOVE_PUD
+	bool
+	help
+	  Architectures that select this are able to move page tables at the
+	  PUD level. If there are only 3 page table levels, the move effectively
+	  happens at the PGD level.
+
+config HAVE_MOVE_PMD
+	bool
+	help
+	  Archs that select this are able to move page tables at the PMD level.
+
 config HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	bool
 
+config HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
+	bool
+
+config HAVE_ARCH_HUGE_VMAP
+	bool
+
+#
+#  Archs that select this would be capable of PMD-sized vmaps (i.e.,
+#  arch_vmap_pmd_supported() returns true). The VM_ALLOW_HUGE_VMAP flag
+#  must be used to enable allocations to use hugepages.
+#
+config HAVE_ARCH_HUGE_VMALLOC
+	depends on HAVE_ARCH_HUGE_VMAP
+	bool
+
+config ARCH_WANT_HUGE_PMD_SHARE
+	bool
+
+# Archs that want to use pmd_mkwrite on kernel memory need it defined even
+# if there are no userspace memory management features that use it
+config ARCH_WANT_KERNEL_PMD_MKWRITE
+	bool
+
+config ARCH_WANT_PMD_MKWRITE
+	def_bool TRANSPARENT_HUGEPAGE || ARCH_WANT_KERNEL_PMD_MKWRITE
+
 config HAVE_ARCH_SOFT_DIRTY
 	bool
 
@@ -468,11 +1119,27 @@ config MODULES_USE_ELF_REL
 	  Modules only use ELF REL relocations.  Modules with ELF RELA
 	  relocations will give an error.
 
-config HAVE_UNDERSCORE_SYMBOL_PREFIX
+config ARCH_WANTS_MODULES_DATA_IN_VMALLOC
 	bool
 	help
-	  Some architectures generate an _ in front of C symbols; things like
-	  module loading and assembly files need to know about this.
+	  For architectures like powerpc/32 which have constraints on module
+	  allocation and need to allocate module data outside of module area.
+
+config ARCH_WANTS_EXECMEM_LATE
+	bool
+	help
+	  For architectures that do not allocate executable memory early on
+	  boot, but rather require its initialization late when there is
+	  enough entropy for module space randomization, for instance
+	  arm64.
+
+config ARCH_HAS_EXECMEM_ROX
+	bool
+	depends on MMU && !HIGHMEM
+	help
+	  For architectures that support allocations of executable memory
+	  with read-only execute permissions. Architecture must implement
+	  execmem_fill_trapping_insns() callback to enable this.
 
 config HAVE_IRQ_EXIT_ON_IRQ_STACK
 	bool
@@ -484,6 +1151,269 @@ config HAVE_IRQ_EXIT_ON_IRQ_STACK
 	  This spares a stack switch and improves cache usage on softirq
 	  processing.
 
+config HAVE_SOFTIRQ_ON_OWN_STACK
+	bool
+	help
+	  Architecture provides a function to run __do_softirq() on a
+	  separate stack.
+
+config SOFTIRQ_ON_OWN_STACK
+	def_bool HAVE_SOFTIRQ_ON_OWN_STACK && !PREEMPT_RT
+
+config ALTERNATE_USER_ADDRESS_SPACE
+	bool
+	help
+	  Architectures set this when the CPU uses separate address
+	  spaces for kernel and user space pointers. In this case, the
+	  access_ok() check on a __user pointer is skipped.
+
+config PGTABLE_LEVELS
+	int
+	default 2
+
+config ARCH_HAS_ELF_RANDOMIZE
+	bool
+	help
+	  An architecture supports choosing randomized locations for
+	  stack, mmap, brk, and ET_DYN. Defined functions:
+	  - arch_mmap_rnd()
+	  - arch_randomize_brk()
+
+config HAVE_ARCH_MMAP_RND_BITS
+	bool
+	help
+	  An arch should select this symbol if it supports setting a variable
+	  number of bits for use in establishing the base address for mmap
+	  allocations, has MMU enabled and provides values for both:
+	  - ARCH_MMAP_RND_BITS_MIN
+	  - ARCH_MMAP_RND_BITS_MAX
+
+config HAVE_EXIT_THREAD
+	bool
+	help
+	  An architecture implements exit_thread.
+
+config ARCH_MMAP_RND_BITS_MIN
+	int
+
+config ARCH_MMAP_RND_BITS_MAX
+	int
+
+config ARCH_MMAP_RND_BITS_DEFAULT
+	int
+
+config ARCH_MMAP_RND_BITS
+	int "Number of bits to use for ASLR of mmap base address" if EXPERT
+	range ARCH_MMAP_RND_BITS_MIN ARCH_MMAP_RND_BITS_MAX
+	default ARCH_MMAP_RND_BITS_DEFAULT if ARCH_MMAP_RND_BITS_DEFAULT
+	default ARCH_MMAP_RND_BITS_MIN
+	depends on HAVE_ARCH_MMAP_RND_BITS
+	help
+	  This value can be used to select the number of bits to use to
+	  determine the random offset to the base address of vma regions
+	  resulting from mmap allocations. This value will be bounded
+	  by the architecture's minimum and maximum supported values.
+
+	  This value can be changed after boot using the
+	  /proc/sys/vm/mmap_rnd_bits tunable
+
+config HAVE_ARCH_MMAP_RND_COMPAT_BITS
+	bool
+	help
+	  An arch should select this symbol if it supports running applications
+	  in compatibility mode, supports setting a variable number of bits for
+	  use in establishing the base address for mmap allocations, has MMU
+	  enabled and provides values for both:
+	  - ARCH_MMAP_RND_COMPAT_BITS_MIN
+	  - ARCH_MMAP_RND_COMPAT_BITS_MAX
+
+config ARCH_MMAP_RND_COMPAT_BITS_MIN
+	int
+
+config ARCH_MMAP_RND_COMPAT_BITS_MAX
+	int
+
+config ARCH_MMAP_RND_COMPAT_BITS_DEFAULT
+	int
+
+config ARCH_MMAP_RND_COMPAT_BITS
+	int "Number of bits to use for ASLR of mmap base address for compatible applications" if EXPERT
+	range ARCH_MMAP_RND_COMPAT_BITS_MIN ARCH_MMAP_RND_COMPAT_BITS_MAX
+	default ARCH_MMAP_RND_COMPAT_BITS_DEFAULT if ARCH_MMAP_RND_COMPAT_BITS_DEFAULT
+	default ARCH_MMAP_RND_COMPAT_BITS_MIN
+	depends on HAVE_ARCH_MMAP_RND_COMPAT_BITS
+	help
+	  This value can be used to select the number of bits to use to
+	  determine the random offset to the base address of vma regions
+	  resulting from mmap allocations for compatible applications This
+	  value will be bounded by the architecture's minimum and maximum
+	  supported values.
+
+	  This value can be changed after boot using the
+	  /proc/sys/vm/mmap_rnd_compat_bits tunable
+
+config HAVE_ARCH_COMPAT_MMAP_BASES
+	bool
+	help
+	  This allows 64bit applications to invoke 32-bit mmap() syscall
+	  and vice-versa 32-bit applications to call 64-bit mmap().
+	  Required for applications doing different bitness syscalls.
+
+config HAVE_PAGE_SIZE_4KB
+	bool
+
+config HAVE_PAGE_SIZE_8KB
+	bool
+
+config HAVE_PAGE_SIZE_16KB
+	bool
+
+config HAVE_PAGE_SIZE_32KB
+	bool
+
+config HAVE_PAGE_SIZE_64KB
+	bool
+
+config HAVE_PAGE_SIZE_256KB
+	bool
+
+choice
+	prompt "MMU page size"
+
+config PAGE_SIZE_4KB
+	bool "4KiB pages"
+	depends on HAVE_PAGE_SIZE_4KB
+	help
+	  This option select the standard 4KiB Linux page size and the only
+	  available option on many architectures. Using 4KiB page size will
+	  minimize memory consumption and is therefore recommended for low
+	  memory systems.
+	  Some software that is written for x86 systems makes incorrect
+	  assumptions about the page size and only runs on 4KiB pages.
+
+config PAGE_SIZE_8KB
+	bool "8KiB pages"
+	depends on HAVE_PAGE_SIZE_8KB
+	help
+	  This option is the only supported page size on a few older
+	  processors, and can be slightly faster than 4KiB pages.
+
+config PAGE_SIZE_16KB
+	bool "16KiB pages"
+	depends on HAVE_PAGE_SIZE_16KB
+	help
+	  This option is usually a good compromise between memory
+	  consumption and performance for typical desktop and server
+	  workloads, often saving a level of page table lookups compared
+	  to 4KB pages as well as reducing TLB pressure and overhead of
+	  per-page operations in the kernel at the expense of a larger
+	  page cache.
+
+config PAGE_SIZE_32KB
+	bool "32KiB pages"
+	depends on HAVE_PAGE_SIZE_32KB
+	help
+	  Using 32KiB page size will result in slightly higher performance
+	  kernel at the price of higher memory consumption compared to
+	  16KiB pages.	This option is available only on cnMIPS cores.
+	  Note that you will need a suitable Linux distribution to
+	  support this.
+
+config PAGE_SIZE_64KB
+	bool "64KiB pages"
+	depends on HAVE_PAGE_SIZE_64KB
+	help
+	  Using 64KiB page size will result in slightly higher performance
+	  kernel at the price of much higher memory consumption compared to
+	  4KiB or 16KiB pages.
+	  This is not suitable for general-purpose workloads but the
+	  better performance may be worth the cost for certain types of
+	  supercomputing or database applications that work mostly with
+	  large in-memory data rather than small files.
+
+config PAGE_SIZE_256KB
+	bool "256KiB pages"
+	depends on HAVE_PAGE_SIZE_256KB
+	help
+	  256KiB pages have little practical value due to their extreme
+	  memory usage.  The kernel will only be able to run applications
+	  that have been compiled with '-zmax-page-size' set to 256KiB
+	  (the default is 64KiB or 4KiB on most architectures).
+
+endchoice
+
+config PAGE_SIZE_LESS_THAN_64KB
+	def_bool y
+	depends on !PAGE_SIZE_64KB
+	depends on PAGE_SIZE_LESS_THAN_256KB
+
+config PAGE_SIZE_LESS_THAN_256KB
+	def_bool y
+	depends on !PAGE_SIZE_256KB
+
+config PAGE_SHIFT
+	int
+	default	12 if PAGE_SIZE_4KB
+	default	13 if PAGE_SIZE_8KB
+	default	14 if PAGE_SIZE_16KB
+	default	15 if PAGE_SIZE_32KB
+	default	16 if PAGE_SIZE_64KB
+	default	18 if PAGE_SIZE_256KB
+
+# This allows to use a set of generic functions to determine mmap base
+# address by giving priority to top-down scheme only if the process
+# is not in legacy mode (compat task, unlimited stack size or
+# sysctl_legacy_va_layout).
+# Architecture that selects this option can provide its own version of:
+# - STACK_RND_MASK
+config ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
+	bool
+	depends on MMU
+	select ARCH_HAS_ELF_RANDOMIZE
+
+config HAVE_OBJTOOL
+	bool
+
+config HAVE_JUMP_LABEL_HACK
+	bool
+
+config HAVE_NOINSTR_HACK
+	bool
+
+config HAVE_NOINSTR_VALIDATION
+	bool
+
+config HAVE_UACCESS_VALIDATION
+	bool
+	select OBJTOOL
+
+config HAVE_STACK_VALIDATION
+	bool
+	help
+	  Architecture supports objtool compile-time frame pointer rule
+	  validation.
+
+config HAVE_RELIABLE_STACKTRACE
+	bool
+	help
+	  Architecture has either save_stack_trace_tsk_reliable() or
+	  arch_stack_walk_reliable() function which only returns a stack trace
+	  if it can guarantee the trace is reliable.
+
+config HAVE_ARCH_HASH
+	bool
+	default n
+	help
+	  If this is set, the architecture provides an <asm/hash.h>
+	  file which provides platform-specific implementations of some
+	  functions in <linux/hash.h> or fs/namei.c.
+
+config HAVE_ARCH_NVRAM_OPS
+	bool
+
+config ISA_BUS_API
+	def_bool ISA
+
 #
 # ABI hall of shame
 #
@@ -530,4 +1460,382 @@ config OLD_SIGACTION
 config COMPAT_OLD_SIGACTION
 	bool
 
+config COMPAT_32BIT_TIME
+	bool "Provide system calls for 32-bit time_t"
+	default !64BIT || COMPAT
+	help
+	  This enables 32 bit time_t support in addition to 64 bit time_t support.
+	  This is relevant on all 32-bit architectures, and 64-bit architectures
+	  as part of compat syscall handling.
+
+config ARCH_NO_PREEMPT
+	bool
+
+config ARCH_SUPPORTS_RT
+	bool
+
+config CPU_NO_EFFICIENT_FFS
+	def_bool n
+
+config HAVE_ARCH_VMAP_STACK
+	def_bool n
+	help
+	  An arch should select this symbol if it can support kernel stacks
+	  in vmalloc space.  This means:
+
+	  - vmalloc space must be large enough to hold many kernel stacks.
+	    This may rule out many 32-bit architectures.
+
+	  - Stacks in vmalloc space need to work reliably.  For example, if
+	    vmap page tables are created on demand, either this mechanism
+	    needs to work while the stack points to a virtual address with
+	    unpopulated page tables or arch code (switch_to() and switch_mm(),
+	    most likely) needs to ensure that the stack's page table entries
+	    are populated before running on a possibly unpopulated stack.
+
+	  - If the stack overflows into a guard page, something reasonable
+	    should happen.  The definition of "reasonable" is flexible, but
+	    instantly rebooting without logging anything would be unfriendly.
+
+config VMAP_STACK
+	default y
+	bool "Use a virtually-mapped stack"
+	depends on HAVE_ARCH_VMAP_STACK
+	depends on !KASAN || KASAN_HW_TAGS || KASAN_VMALLOC
+	help
+	  Enable this if you want the use virtually-mapped kernel stacks
+	  with guard pages.  This causes kernel stack overflows to be
+	  caught immediately rather than causing difficult-to-diagnose
+	  corruption.
+
+	  To use this with software KASAN modes, the architecture must support
+	  backing virtual mappings with real shadow memory, and KASAN_VMALLOC
+	  must be enabled.
+
+config HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
+	def_bool n
+	help
+	  An arch should select this symbol if it can support kernel stack
+	  offset randomization with calls to add_random_kstack_offset()
+	  during syscall entry and choose_random_kstack_offset() during
+	  syscall exit. Careful removal of -fstack-protector-strong and
+	  -fstack-protector should also be applied to the entry code and
+	  closely examined, as the artificial stack bump looks like an array
+	  to the compiler, so it will attempt to add canary checks regardless
+	  of the static branch state.
+
+config RANDOMIZE_KSTACK_OFFSET
+	bool "Support for randomizing kernel stack offset on syscall entry" if EXPERT
+	default y
+	depends on HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
+	help
+	  The kernel stack offset can be randomized (after pt_regs) by
+	  roughly 5 bits of entropy, frustrating memory corruption
+	  attacks that depend on stack address determinism or
+	  cross-syscall address exposures.
+
+	  The feature is controlled via the "randomize_kstack_offset=on/off"
+	  kernel boot param, and if turned off has zero overhead due to its use
+	  of static branches (see JUMP_LABEL).
+
+	  If unsure, say Y.
+
+config RANDOMIZE_KSTACK_OFFSET_DEFAULT
+	bool "Default state of kernel stack offset randomization"
+	depends on RANDOMIZE_KSTACK_OFFSET
+	help
+	  Kernel stack offset randomization is controlled by kernel boot param
+	  "randomize_kstack_offset=on/off", and this config chooses the default
+	  boot state.
+
+config ARCH_OPTIONAL_KERNEL_RWX
+	def_bool n
+
+config ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
+	def_bool n
+
+config ARCH_HAS_STRICT_KERNEL_RWX
+	def_bool n
+
+config STRICT_KERNEL_RWX
+	bool "Make kernel text and rodata read-only" if ARCH_OPTIONAL_KERNEL_RWX
+	depends on ARCH_HAS_STRICT_KERNEL_RWX
+	default !ARCH_OPTIONAL_KERNEL_RWX || ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
+	help
+	  If this is set, kernel text and rodata memory will be made read-only,
+	  and non-text memory will be made non-executable. This provides
+	  protection against certain security exploits (e.g. executing the heap
+	  or modifying text)
+
+	  These features are considered standard security practice these days.
+	  You should say Y here in almost all cases.
+
+config ARCH_HAS_STRICT_MODULE_RWX
+	def_bool n
+
+config STRICT_MODULE_RWX
+	bool "Set loadable kernel module data as NX and text as RO" if ARCH_OPTIONAL_KERNEL_RWX
+	depends on ARCH_HAS_STRICT_MODULE_RWX && MODULES
+	default !ARCH_OPTIONAL_KERNEL_RWX || ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
+	help
+	  If this is set, module text and rodata memory will be made read-only,
+	  and non-text memory will be made non-executable. This provides
+	  protection against certain security exploits (e.g. writing to text)
+
+# select if the architecture provides an asm/dma-direct.h header
+config ARCH_HAS_PHYS_TO_DMA
+	bool
+
+config ARCH_HAS_CPU_RESCTRL
+	bool
+	help
+	  An architecture selects this option to indicate that the necessary
+	  hooks are provided to support the common memory system usage
+	  monitoring and control interfaces provided by the 'resctrl'
+	  filesystem (see RESCTRL_FS).
+
+config HAVE_ARCH_COMPILER_H
+	bool
+	help
+	  An architecture can select this if it provides an
+	  asm/compiler.h header that should be included after
+	  linux/compiler-*.h in order to override macro definitions that those
+	  headers generally provide.
+
+config HAVE_ARCH_LIBGCC_H
+	bool
+	help
+	  An architecture can select this if it provides an
+	  asm/libgcc.h header that should be included after
+	  linux/libgcc.h in order to override macro definitions that
+	  header generally provides.
+
+config HAVE_ARCH_PREL32_RELOCATIONS
+	bool
+	help
+	  May be selected by an architecture if it supports place-relative
+	  32-bit relocations, both in the toolchain and in the module loader,
+	  in which case relative references can be used in special sections
+	  for PCI fixup, initcalls etc which are only half the size on 64 bit
+	  architectures, and don't require runtime relocation on relocatable
+	  kernels.
+
+config ARCH_USE_MEMREMAP_PROT
+	bool
+
+config LOCK_EVENT_COUNTS
+	bool "Locking event counts collection"
+	depends on DEBUG_FS
+	help
+	  Enable light-weight counting of various locking related events
+	  in the system with minimal performance impact. This reduces
+	  the chance of application behavior change because of timing
+	  differences. The counts are reported via debugfs.
+
+# Select if the architecture has support for applying RELR relocations.
+config ARCH_HAS_RELR
+	bool
+
+config RELR
+	bool "Use RELR relocation packing"
+	depends on ARCH_HAS_RELR && TOOLS_SUPPORT_RELR
+	default y
+	help
+	  Store the kernel's dynamic relocations in the RELR relocation packing
+	  format. Requires a compatible linker (LLD supports this feature), as
+	  well as compatible NM and OBJCOPY utilities (llvm-nm and llvm-objcopy
+	  are compatible).
+
+config ARCH_HAS_MEM_ENCRYPT
+	bool
+
+config ARCH_HAS_CC_PLATFORM
+	bool
+
+config HAVE_SPARSE_SYSCALL_NR
+	bool
+	help
+	  An architecture should select this if its syscall numbering is sparse
+	  to save space. For example, MIPS architecture has a syscall array with
+	  entries at 4000, 5000 and 6000 locations. This option turns on syscall
+	  related optimizations for a given architecture.
+
+config ARCH_HAS_VDSO_ARCH_DATA
+	depends on HAVE_GENERIC_VDSO
+	bool
+
+config ARCH_HAS_VDSO_TIME_DATA
+	bool
+
+config HAVE_STATIC_CALL
+	bool
+
+config HAVE_STATIC_CALL_INLINE
+	bool
+	depends on HAVE_STATIC_CALL
+	select OBJTOOL
+
+config HAVE_PREEMPT_DYNAMIC
+	bool
+
+config HAVE_PREEMPT_DYNAMIC_CALL
+	bool
+	depends on HAVE_STATIC_CALL
+	select HAVE_PREEMPT_DYNAMIC
+	help
+	  An architecture should select this if it can handle the preemption
+	  model being selected at boot time using static calls.
+
+	  Where an architecture selects HAVE_STATIC_CALL_INLINE, any call to a
+	  preemption function will be patched directly.
+
+	  Where an architecture does not select HAVE_STATIC_CALL_INLINE, any
+	  call to a preemption function will go through a trampoline, and the
+	  trampoline will be patched.
+
+	  It is strongly advised to support inline static call to avoid any
+	  overhead.
+
+config HAVE_PREEMPT_DYNAMIC_KEY
+	bool
+	depends on HAVE_ARCH_JUMP_LABEL
+	select HAVE_PREEMPT_DYNAMIC
+	help
+	  An architecture should select this if it can handle the preemption
+	  model being selected at boot time using static keys.
+
+	  Each preemption function will be given an early return based on a
+	  static key. This should have slightly lower overhead than non-inline
+	  static calls, as this effectively inlines each trampoline into the
+	  start of its callee. This may avoid redundant work, and may
+	  integrate better with CFI schemes.
+
+	  This will have greater overhead than using inline static calls as
+	  the call to the preemption function cannot be entirely elided.
+
+config ARCH_WANT_LD_ORPHAN_WARN
+	bool
+	help
+	  An arch should select this symbol once all linker sections are explicitly
+	  included, size-asserted, or discarded in the linker scripts. This is
+	  important because we never want expected sections to be placed heuristically
+	  by the linker, since the locations of such sections can change between linker
+	  versions.
+
+config HAVE_ARCH_PFN_VALID
+	bool
+
+config ARCH_SUPPORTS_DEBUG_PAGEALLOC
+	bool
+
+config ARCH_SUPPORTS_PAGE_TABLE_CHECK
+	bool
+
+config ARCH_SPLIT_ARG64
+	bool
+	help
+	  If a 32-bit architecture requires 64-bit arguments to be split into
+	  pairs of 32-bit arguments, select this option.
+
+config ARCH_HAS_ELFCORE_COMPAT
+	bool
+
+config ARCH_HAS_PARANOID_L1D_FLUSH
+	bool
+
+config ARCH_HAVE_TRACE_MMIO_ACCESS
+	bool
+
+config DYNAMIC_SIGFRAME
+	bool
+
+# Select, if arch has a named attribute group bound to NUMA device nodes.
+config HAVE_ARCH_NODE_DEV_GROUP
+	bool
+
+config ARCH_HAS_HW_PTE_YOUNG
+	bool
+	help
+	  Architectures that select this option are capable of setting the
+	  accessed bit in PTE entries when using them as part of linear address
+	  translations. Architectures that require runtime check should select
+	  this option and override arch_has_hw_pte_young().
+
+config ARCH_HAS_NONLEAF_PMD_YOUNG
+	bool
+	help
+	  Architectures that select this option are capable of setting the
+	  accessed bit in non-leaf PMD entries when using them as part of linear
+	  address translations. Page table walkers that clear the accessed bit
+	  may use this capability to reduce their search space.
+
+config ARCH_HAS_KERNEL_FPU_SUPPORT
+	bool
+	help
+	  Architectures that select this option can run floating-point code in
+	  the kernel, as described in Documentation/core-api/floating-point.rst.
+
+config ARCH_VMLINUX_NEEDS_RELOCS
+	bool
+	help
+	  Whether the architecture needs vmlinux to be built with static
+	  relocations preserved. This is used by some architectures to
+	  construct bespoke relocation tables for KASLR.
+
+# Select if architecture uses the common generic TIF bits
+config HAVE_GENERIC_TIF_BITS
+       bool
+
 source "kernel/gcov/Kconfig"
+
+source "scripts/gcc-plugins/Kconfig"
+
+config FUNCTION_ALIGNMENT_4B
+	bool
+
+config FUNCTION_ALIGNMENT_8B
+	bool
+
+config FUNCTION_ALIGNMENT_16B
+	bool
+
+config FUNCTION_ALIGNMENT_32B
+	bool
+
+config FUNCTION_ALIGNMENT_64B
+	bool
+
+config FUNCTION_ALIGNMENT
+	int
+	default 64 if FUNCTION_ALIGNMENT_64B
+	default 32 if FUNCTION_ALIGNMENT_32B
+	default 16 if FUNCTION_ALIGNMENT_16B
+	default 8 if FUNCTION_ALIGNMENT_8B
+	default 4 if FUNCTION_ALIGNMENT_4B
+	default 0
+
+config CC_HAS_MIN_FUNCTION_ALIGNMENT
+	# Detect availability of the GCC option -fmin-function-alignment which
+	# guarantees minimal alignment for all functions, unlike
+	# -falign-functions which the compiler ignores for cold functions.
+	def_bool $(cc-option, -fmin-function-alignment=8)
+
+config CC_HAS_SANE_FUNCTION_ALIGNMENT
+	# Set if the guaranteed alignment with -fmin-function-alignment is
+	# available or extra care is required in the kernel. Clang provides
+	# strict alignment always, even with -falign-functions.
+	def_bool CC_HAS_MIN_FUNCTION_ALIGNMENT || CC_IS_CLANG
+
+config ARCH_NEED_CMPXCHG_1_EMU
+	bool
+
+config ARCH_WANTS_PRE_LINK_VMLINUX
+	bool
+	help
+	  An architecture can select this if it provides arch/<arch>/tools/Makefile
+	  with .arch.vmlinux.o target to be linked into vmlinux.
+
+config ARCH_HAS_CPU_ATTACK_VECTORS
+	bool
+
+endmenu
diff --git a/arch/alpha/Kbuild b/arch/alpha/Kbuild
new file mode 100644
index 000000000000..345d79df24bb
--- /dev/null
+++ b/arch/alpha/Kbuild
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y			+= kernel/ mm/
+obj-$(CONFIG_MATHEMU)	+= math-emu/
+
+# for cleaning
+subdir- += boot
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index b7ff9a318c31..80367f2cf821 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -1,32 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
 config ALPHA
 	bool
 	default y
+	select ARCH_32BIT_USTAT_F_TINODE
+	select ARCH_HAS_CURRENT_STACK_POINTER
+	select ARCH_HAS_DMA_OPS if PCI
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
-	select HAVE_AOUT
-	select HAVE_IDE
-	select HAVE_OPROFILE
+	select ARCH_MODULE_NEEDS_WEAK_PER_CPU if SMP
+	select ARCH_NO_PREEMPT
+	select ARCH_NO_SG_CHAIN
+	select ARCH_USE_CMPXCHG_LOCKREF
+	select FORCE_PCI
+	select PCI_DOMAINS if PCI
+	select PCI_SYSCALL if PCI
+	select HAVE_ASM_MODVERSIONS
+	select HAVE_PAGE_SIZE_8KB
 	select HAVE_PCSPKR_PLATFORM
 	select HAVE_PERF_EVENTS
-	select HAVE_DMA_ATTRS
-	select VIRT_TO_BUS
+	select NEED_DMA_MAP_STATE
+	select NEED_SG_DMA_LENGTH
 	select GENERIC_IRQ_PROBE
+	select GENERIC_PCI_IOMAP
 	select AUTO_IRQ_AFFINITY if SMP
 	select GENERIC_IRQ_SHOW
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
-	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select AUDIT_ARCH
-	select GENERIC_CLOCKEVENTS
+	select GENERIC_CPU_VULNERABILITIES
 	select GENERIC_SMP_IDLE_THREAD
-	select GENERIC_STRNCPY_FROM_USER
-	select GENERIC_STRNLEN_USER
+	select HAS_IOPORT
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_MOD_ARCH_SPECIFIC
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
 	select ODD_RT_SIGACTION
 	select OLD_SIGSUSPEND
+	select CPU_NO_EFFICIENT_FFS if !ALPHA_EV67
+	select MMU_GATHER_NO_RANGE
+	select SPARSEMEM_EXTREME if SPARSEMEM
+	select ZONE_DMA
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,
@@ -40,13 +53,6 @@ config MMU
 	bool
 	default y
 
-config RWSEM_GENERIC_SPINLOCK
-	bool
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default y
-
 config ARCH_HAS_ILOG2_U32
 	bool
 	default n
@@ -59,25 +65,13 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config ZONE_DMA
-	bool
-	default y
-
-config ARCH_DMA_ADDR_T_64BIT
-	def_bool y
-
-config NEED_DMA_MAP_STATE
-       def_bool y
-
-config NEED_SG_DMA_LENGTH
-	def_bool y
-
 config GENERIC_ISA_DMA
 	bool
 	default y
 
-source "init/Kconfig"
-source "kernel/Kconfig.freezer"
+config PGTABLE_LEVELS
+	int
+	default 3
 
 config AUDIT_ARCH
 	bool
@@ -87,7 +81,7 @@ menu "System setup"
 choice
 	prompt "Alpha system type"
 	default ALPHA_GENERIC
-	---help---
+	help
 	  This is the system type of your hardware.  A "generic" kernel will
 	  run on any supported Alpha system. However, if you configure a
 	  kernel for your specific system, it will be faster and smaller.
@@ -97,22 +91,11 @@ choice
 	  <http://www.alphalinux.org/>. In summary:
 
 	  Alcor/Alpha-XLT     AS 600, AS 500, XL-300, XL-366
-	  Alpha-XL            XL-233, XL-266
-	  AlphaBook1          Alpha laptop
-	  Avanti              AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
-	  Cabriolet           AlphaPC64, AlphaPCI64
 	  DP264               DP264 / DS20 / ES40 / DS10 / DS10L
-	  EB164               EB164 21164 evaluation board
-	  EB64+               EB64+ 21064 evaluation board
-	  EB66                EB66 21066 evaluation board
-	  EB66+               EB66+ 21066 evaluation board
-	  Jensen              DECpc 150, DEC 2000 models 300, 500
 	  LX164               AlphaPC164-LX
-	  Lynx                AS 2100A
 	  Miata               Personal Workstation 433/500/600 a/au
 	  Marvel              AlphaServer ES47 / ES80 / GS1280
 	  Mikasa              AS 1000
-	  Noname              AXPpci33, UDB (Multia)
 	  Noritake            AS 1000A, AS 600A, AS 800
 	  PC164               AlphaPC164
 	  Rawhide             AS 1200, AS 4000, AS 4100
@@ -129,11 +112,13 @@ choice
 config ALPHA_GENERIC
 	bool "Generic"
 	depends on TTY
+	select HAVE_EISA
 	help
 	  A generic kernel will run on all supported Alpha hardware.
 
 config ALPHA_ALCOR
 	bool "Alcor/Alpha-XLT"
+	select HAVE_EISA
 	help
 	  For systems using the Digital ALCOR chipset: 5 chips (4, 64-bit data
 	  slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O
@@ -142,27 +127,6 @@ config ALPHA_ALCOR
 	  all the work required to support an external Bcache and to maintain
 	  memory coherence when a PCI device DMAs into (or out of) memory.
 
-config ALPHA_XL
-	bool "Alpha-XL"
-	help
-	  XL-233 and XL-266-based Alpha systems.
-
-config ALPHA_BOOK1
-	bool "AlphaBook1"
-	help
-	  Dec AlphaBook1/Burns Alpha-based laptops.
-
-config ALPHA_AVANTI_CH
-	bool "Avanti"
-
-config ALPHA_CABRIOLET
-	bool "Cabriolet"
-	help
-	  Cabriolet AlphaPC64, AlphaPCI64 systems.  Derived from EB64+ but now
-	  baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
-	  slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
-	  Bcache SIMMs.  Requires power supply with 3.3V output.
-
 config ALPHA_DP264
 	bool "DP264"
 	help
@@ -170,60 +134,18 @@ config ALPHA_DP264
 	  API Networks: 264DP, UP2000(+), CS20;
 	  Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40.
 
-config ALPHA_EB164
-	bool "EB164"
-	help
-	  EB164 21164 evaluation board from DEC.  Uses 21164 and ALCOR.  Has
-	  ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is
-	  shared with an ISA slot) and 2 32-bit PCI slots.  Uses plus-in
-	  Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD,
-	  MOUSE (PS2 style), RTC/NVRAM.  Boot ROM is Flash.  PC-AT-sized
-	  motherboard.  Requires power supply with 3.3V output.
-
-config ALPHA_EB64P_CH
-	bool "EB64+"
-
-config ALPHA_EB66
-	bool "EB66"
-	help
-	  A Digital DS group board.  Uses 21066 or 21066A.  I/O sub-system is
-	  identical to EB64+.  Baby PC-AT size.  Runs from standard PC power
-	  supply.  The EB66 schematic was published as a marketing poster
-	  advertising the 21066 as "the first microprocessor in the world with
-	  embedded PCI".
-
-config ALPHA_EB66P
-	bool "EB66+"
-	help
-	  Later variant of the EB66 board.
-
 config ALPHA_EIGER
 	bool "Eiger"
 	help
 	  Apparently an obscure OEM single-board computer based on the
 	  Typhoon/Tsunami chipset family. Information on it is scanty.
 
-config ALPHA_JENSEN
-	bool "Jensen"
-	help
-	  DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
-	  of the first-generation Alpha systems. A number of these systems
-	  seem to be available on the second- hand market. The Jensen is a
-	  floor-standing tower system which originally used a 150MHz 21064 It
-	  used programmable logic to interface a 486 EISA I/O bridge to the
-	  CPU.
-
 config ALPHA_LX164
 	bool "LX164"
 	help
 	  A technical overview of this board is available at
 	  <http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
 
-config ALPHA_LYNX
-	bool "Lynx"
-	help
-	  AlphaServer 2100A-based systems.
-
 config ALPHA_MARVEL
 	bool "Marvel"
 	help
@@ -231,6 +153,7 @@ config ALPHA_MARVEL
 
 config ALPHA_MIATA
 	bool "Miata"
+	select HAVE_EISA
 	help
 	  The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
 	  or 600au).
@@ -245,11 +168,9 @@ config ALPHA_NAUTILUS
 	help
 	  Alpha systems based on the AMD 751 & ALI 1543C chipsets.
 
-config ALPHA_NONAME_CH
-	bool "Noname"
-
 config ALPHA_NORITAKE
 	bool "Noritake"
+	select HAVE_EISA
 	help
 	  AlphaServer 1000A, AlphaServer 600A, and AlphaServer 800-based
 	  systems.
@@ -257,11 +178,9 @@ config ALPHA_NORITAKE
 config ALPHA_PC164
 	bool "PC164"
 
-config ALPHA_P2K
-	bool "Platform2000"
-
 config ALPHA_RAWHIDE
 	bool "Rawhide"
+	select HAVE_EISA
 	help
 	  AlphaServer 1200, AlphaServer 4000 and AlphaServer 4100 machines.
 	  See HOWTO at
@@ -281,6 +200,7 @@ config ALPHA_SX164
 
 config ALPHA_SABLE
 	bool "Sable"
+	select HAVE_EISA
 	help
 	  Digital AlphaServer 2000 and 2100-based systems.
 
@@ -321,112 +241,18 @@ config ISA_DMA_API
 	bool
 	default y
 
-config PCI
-	bool
-	depends on !ALPHA_JENSEN
-	select GENERIC_PCI_IOMAP
-	default y
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
-config PCI_DOMAINS
-	bool
-	default y
-
-config PCI_SYSCALL
-	def_bool PCI
-
-config IOMMU_HELPER
-	def_bool PCI
-
-config ALPHA_NONAME
-	bool
-	depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
-	default y
-	help
-	  The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
-	  UDB).  This design was produced by Digital's Technical OEM (TOEM)
-	  group. It uses the 21066 processor running at 166MHz or 233MHz. It
-	  is a baby-AT size, and runs from a standard PC power supply. It has
-	  5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
-	  2 versions, with either PS/2 or large DIN connectors for the
-	  keyboard.
-
-config ALPHA_EV4
-	bool
-	depends on ALPHA_JENSEN || (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
-	default y if !ALPHA_LYNX
-
-config ALPHA_LCA
-	bool
-	depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
-	default y
-
-config ALPHA_APECS
-	bool
-	depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
-	default y
-
-config ALPHA_EB64P
-	bool
-	depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
-	default y
-	help
-	  Uses 21064 or 21064A and APECs.  Has ISA and PCI expansion (3 ISA,
-	  2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
-	  ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
-	  (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
-	  SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM.  PC-AT size.
-	  Runs from standard PC power supply.
-
-config ALPHA_EV5
-	bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX
-	default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
-
-config ALPHA_EV4
-	bool
-	default y if ALPHA_LYNX && !ALPHA_EV5
-
 config ALPHA_CIA
 	bool
-	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
+	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_ALCOR
 	default y
 
 config ALPHA_EV56
-	bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR
-	default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA
-
-config ALPHA_EV56
-	prompt "EV56 CPU (speed >= 333MHz)?"
-	depends on ALPHA_NORITAKE || ALPHA_PRIMO
-
-config ALPHA_EV56
-	prompt "EV56 CPU (speed >= 400MHz)?"
-	depends on ALPHA_RAWHIDE
-
-config ALPHA_PRIMO
-	bool "EV5 CPU daughtercard (model 5/xxx)?"
-	depends on ALPHA_NORITAKE || ALPHA_MIKASA
-	help
-	  Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
-
-config ALPHA_GAMMA
-	bool "EV5 CPU(s) (model 5/xxx)?"
-	depends on ALPHA_SABLE
-	help
-	  Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
-
-config ALPHA_GAMMA
 	bool
-	depends on ALPHA_LYNX
-	default y
+	default y if ALPHA_ALCOR || ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_RAWHIDE || ALPHA_SABLE
 
 config ALPHA_T2
 	bool
-	depends on ALPHA_SABLE || ALPHA_LYNX
+	depends on ALPHA_SABLE
 	default y
 
 config ALPHA_PYXIS
@@ -470,15 +296,6 @@ config GENERIC_HWEIGHT
 	bool
 	default y if !ALPHA_EV67
 
-config ALPHA_AVANTI
-	bool
-	depends on ALPHA_XL || ALPHA_AVANTI_CH
-	default y
-	help
-	  Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
-	  Alphas. Info at
-	  <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
-
 config ALPHA_BROKEN_IRQ_MASK
 	bool
 	depends on ALPHA_GENERIC || ALPHA_PC164
@@ -496,22 +313,22 @@ config VGA_HOSE
 config ALPHA_QEMU
 	bool "Run under QEMU emulation"
 	depends on !ALPHA_GENERIC
-	---help---
+	help
 	  Assume the presence of special features supported by QEMU PALcode
 	  that reduce the overhead of system emulation.
 
 	  Generic kernels will auto-detect QEMU.  But when building a
 	  system-specific kernel, the assumption is that we want to
-	  elimiate as many runtime tests as possible.
+	  eliminate as many runtime tests as possible.
 
 	  If unsure, say N.
 
 
 config ALPHA_SRM
-	bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
+	bool "Use SRM as bootloader" if ALPHA_PC164 || ALPHA_TAKARA || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS
 	depends on TTY
-	default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
-	---help---
+	default y if ALPHA_MIKASA || ALPHA_SABLE || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
+	help
 	  There are two different types of booting firmware on Alphas: SRM,
 	  which is command line driven, and ARC, which uses menus and arrow
 	  keys. Details about the Linux/Alpha booting process are contained in
@@ -531,18 +348,13 @@ config ALPHA_SRM
 
 	  If unsure, say N.
 
-config EISA
-	bool
-	depends on ALPHA_GENERIC || ALPHA_JENSEN || ALPHA_ALCOR || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_RAWHIDE
-	default y
-
 config ARCH_MAY_HAVE_PC_FDC
 	def_bool y
 
 config SMP
 	bool "Symmetric multi-processing support"
-	depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
-	---help---
+	depends on ALPHA_SABLE || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
+	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
 	  than one CPU, say Y.
@@ -554,15 +366,10 @@ config SMP
 	  will run faster if you say N here.
 
 	  See also the SMP-HOWTO available at
-	  <http://www.tldp.org/docs.html#howto>.
+	  <https://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
 
-config HAVE_DEC_LOCK
-	bool
-	depends on SMP
-	default y
-
 config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
 	range 2 32
@@ -571,33 +378,21 @@ config NR_CPUS
 	default "4" if !ALPHA_GENERIC && !ALPHA_MARVEL
 	help
 	  MARVEL support can handle a maximum of 32 CPUs, all the others
-          with working support have a maximum of 4 CPUs.
+	  with working support have a maximum of 4 CPUs.
 
-config ARCH_DISCONTIGMEM_ENABLE
-	bool "Discontiguous Memory Support"
+config ARCH_SPARSEMEM_ENABLE
+	bool "Sparse Memory Support"
 	help
 	  Say Y to support efficient handling of discontiguous physical memory,
-	  for architectures which are either NUMA (Non-Uniform Memory Access)
-	  or have huge holes in the physical address space for other reasons.
-	  See <file:Documentation/vm/numa> for more.
-
-source "mm/Kconfig"
-
-config NUMA
-	bool "NUMA Support (EXPERIMENTAL)"
-	depends on DISCONTIGMEM && BROKEN
-	help
-	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
-	  Access).  This option is for configuring high-end multiprocessor
-	  server machines.  If in doubt, say N.
+	  for systems that have huge holes in the physical address space.
 
 config ALPHA_WTINT
 	bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
 	default y if ALPHA_QEMU
-	default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
+	default n if ALPHA_EV56
 	default n if !ALPHA_SRM && !ALPHA_GENERIC
 	default y if SMP
-	---help---
+	help
 	  The Wait for Interrupt (WTINT) PALcall attempts to place the CPU
 	  to sleep until the next interrupt.  This may reduce the power
 	  consumed, and the heat produced by the computer.  However, it has
@@ -615,15 +410,10 @@ config ALPHA_WTINT
 
 	  If unsure, say N.
 
-config NODES_SHIFT
-	int
-	default "7"
-	depends on NEED_MULTIPLE_NODES
-
 # LARGE_VMALLOC is racy, if you *really* need it then fix it first
 config ALPHA_LARGE_VMALLOC
 	bool
-	---help---
+	help
 	  Process creation and other aspects of virtual memory management can
 	  be streamlined if we restrict the kernel to one PGD for all vmalloc
 	  allocations.  This equates to about 8GB.
@@ -642,7 +432,7 @@ config VERBOSE_MCHECK_ON
 	int "Verbose Printing Mode (0=off, 1=on, 2=all)"
 	depends on VERBOSE_MCHECK
 	default 1
-	---help---
+	help
 	  This option allows the default printing mode to be set, and then
 	  possibly overridden by a boot command argument.
 
@@ -661,7 +451,7 @@ choice
 	default HZ_128 if ALPHA_QEMU
 	default HZ_1200 if ALPHA_RAWHIDE
 	default HZ_1024
-	---help---
+	help
 	  The frequency at which timer interrupts occur.  A high frequency
 	  minimizes latency, whereas a low frequency minimizes overhead of
 	  process accounting.  The later effect is especially significant
@@ -685,7 +475,7 @@ choice
 endchoice
 
 config HZ
-	int 
+	int
 	default 32 if HZ_32
 	default 64 if HZ_64
 	default 128 if HZ_128
@@ -693,15 +483,10 @@ config HZ
 	default 1200 if HZ_1200
 	default 1024
 
-source "drivers/pci/Kconfig"
-source "drivers/eisa/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
 config SRM_ENV
 	tristate "SRM environment through procfs"
 	depends on PROC_FS
-	---help---
+	help
 	  If you enable this option, a subdirectory inside /proc called
 	  /proc/srm_environment will give you access to the all important
 	  SRM environment variables (those which have a name) and also
@@ -721,28 +506,11 @@ config SRM_ENV
 	  This driver is also available as a module and will be called
 	  srm_env then.
 
-source "fs/Kconfig.binfmt"
-
 endmenu
 
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/alpha/Kconfig.debug"
-
 # DUMMY_CONSOLE may be defined in drivers/video/console/Kconfig
 # but we also need it if VGA_HOSE is set
 config DUMMY_CONSOLE
 	bool
 	depends on VGA_HOSE
 	default y
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
diff --git a/arch/alpha/Kconfig.debug b/arch/alpha/Kconfig.debug
index 3f6265f2d9d4..f85f4281cc48 100644
--- a/arch/alpha/Kconfig.debug
+++ b/arch/alpha/Kconfig.debug
@@ -1,6 +1,4 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
+# SPDX-License-Identifier: GPL-2.0
 
 config EARLY_PRINTK
 	bool
@@ -11,7 +9,7 @@ config ALPHA_LEGACY_START_ADDRESS
 	bool "Legacy kernel start address"
 	depends on ALPHA_GENERIC
 	default n
-	---help---
+	help
 	  The 2.4 kernel changed the kernel start address from 0x310000
 	  to 0x810000 to make room for the Wildfire's larger SRM console.
 	  Recent consoles on Titan and Marvel machines also require the
@@ -38,5 +36,3 @@ config MATHEMU
 	  This option is required for IEEE compliant floating point arithmetic
 	  on the Alpha. The only time you would ever not say Y is to say M in
 	  order to debug the code. Say Y unless you know what you are doing.
-
-endmenu
diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile
index 2cc3cc519c54..35445ff2e489 100644
--- a/arch/alpha/Makefile
+++ b/arch/alpha/Makefile
@@ -11,22 +11,18 @@
 NM := $(NM) -B
 
 LDFLAGS_vmlinux	:= -static -N #-relax
-CHECKFLAGS	+= -D__alpha__ -m64
+CHECKFLAGS	+= -D__alpha__
 cflags-y	:= -pipe -mno-fp-regs -ffixed-8
 cflags-y	+= $(call cc-option, -fno-jump-tables)
 
-cpuflags-$(CONFIG_ALPHA_EV4)		:= -mcpu=ev4
-cpuflags-$(CONFIG_ALPHA_EV5)		:= -mcpu=ev5
 cpuflags-$(CONFIG_ALPHA_EV56)		:= -mcpu=ev56
 cpuflags-$(CONFIG_ALPHA_POLARIS)	:= -mcpu=pca56
 cpuflags-$(CONFIG_ALPHA_SX164)		:= -mcpu=pca56
 cpuflags-$(CONFIG_ALPHA_EV6)		:= -mcpu=ev6
 cpuflags-$(CONFIG_ALPHA_EV67)		:= -mcpu=ev67
 # If GENERIC, make sure to turn off any instruction set extensions that
-# the host compiler might have on by default.  Given that EV4 and EV5
-# have the same instruction set, prefer EV5 because an EV5 schedule is
-# more likely to keep an EV4 processor busy than vice-versa.
-cpuflags-$(CONFIG_ALPHA_GENERIC)	:= -mcpu=ev5
+# the host compiler might have on by default.
+cpuflags-$(CONFIG_ALPHA_GENERIC)	:= -mcpu=ev56 -mtune=ev6
 
 cflags-y				+= $(cpuflags-y)
 
@@ -36,11 +32,6 @@ cflags-y				+= $(cpuflags-y)
 # BWX is most important, but we don't really want any emulation ever.
 KBUILD_CFLAGS += $(cflags-y) -Wa,-mev6
 
-head-y := arch/alpha/kernel/head.o
-
-core-y				+= arch/alpha/kernel/ arch/alpha/mm/
-core-$(CONFIG_MATHEMU)		+= arch/alpha/math-emu/
-drivers-$(CONFIG_OPROFILE)	+= arch/alpha/oprofile/
 libs-y				+= arch/alpha/lib/
 
 # export what is needed by arch/alpha/boot/Makefile
@@ -58,8 +49,8 @@ $(boot)/vmlinux.gz: vmlinux
 bootimage bootpfile bootpzfile: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
+archheaders:
+	$(Q)$(MAKE) $(build)=arch/alpha/kernel/syscalls all
 
 define archhelp
   echo '* boot		- Compressed kernel image (arch/alpha/boot/vmlinux.gz)'
diff --git a/arch/alpha/boot/Makefile b/arch/alpha/boot/Makefile
index cd143887380a..d8dba85e606c 100644
--- a/arch/alpha/boot/Makefile
+++ b/arch/alpha/boot/Makefile
@@ -8,12 +8,15 @@
 # Copyright (C) 1994 by Linus Torvalds
 #
 
-hostprogs-y	:= tools/mkbb tools/objstrip
+hostprogs	:= tools/mkbb tools/objstrip
 targets		:= vmlinux.gz vmlinux \
 		   vmlinux.nh tools/lxboot tools/bootlx tools/bootph \
 		   tools/bootpzh bootloader bootpheader bootpzheader 
 OBJSTRIP	:= $(obj)/tools/objstrip
 
+KBUILD_HOSTCFLAGS := -Wall -I$(objtree)/usr/include
+BOOTCFLAGS	+= -I$(objtree)/$(obj) -I$(srctree)/$(obj)
+
 # SRM bootable image.  Copy to offset 512 of a partition.
 $(obj)/bootimage: $(addprefix $(obj)/tools/,mkbb lxboot bootlx) $(obj)/vmlinux.nh
 	( cat $(obj)/tools/lxboot $(obj)/tools/bootlx $(obj)/vmlinux.nh ) > $@ 
@@ -96,13 +99,14 @@ $(obj)/tools/bootph: $(obj)/bootpheader $(OBJSTRIP) FORCE
 $(obj)/tools/bootpzh: $(obj)/bootpzheader $(OBJSTRIP) FORCE
 	$(call if_changed,objstrip)
 
-LDFLAGS_bootloader   := -static -uvsprintf -T  #-N -relax
-LDFLAGS_bootpheader  := -static -uvsprintf -T  #-N -relax
-LDFLAGS_bootpzheader := -static -uvsprintf -T  #-N -relax
+LDFLAGS_bootloader   := -static -T # -N -relax
+LDFLAGS_bootloader   := -static -T # -N -relax
+LDFLAGS_bootpheader  := -static -T # -N -relax
+LDFLAGS_bootpzheader := -static -T # -N -relax
 
-OBJ_bootlx   := $(obj)/head.o $(obj)/main.o
-OBJ_bootph   := $(obj)/head.o $(obj)/bootp.o
-OBJ_bootpzh  := $(obj)/head.o $(obj)/bootpz.o $(obj)/misc.o
+OBJ_bootlx   := $(obj)/head.o $(obj)/stdio.o $(obj)/main.o
+OBJ_bootph   := $(obj)/head.o $(obj)/stdio.o $(obj)/bootp.o
+OBJ_bootpzh  := $(obj)/head.o $(obj)/stdio.o $(obj)/bootpz.o $(obj)/misc.o
 
 $(obj)/bootloader: $(obj)/bootloader.lds $(OBJ_bootlx) $(LIBS_Y) FORCE
 	$(call if_changed,ld)
diff --git a/arch/alpha/boot/bootloader.lds b/arch/alpha/boot/bootloader.lds
index 31c081ce1d50..8cdff54c6e41 100644
--- a/arch/alpha/boot/bootloader.lds
+++ b/arch/alpha/boot/bootloader.lds
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 OUTPUT_FORMAT("elf64-alpha")
 ENTRY(__start)
 printk = srm_printk;
diff --git a/arch/alpha/boot/bootp.c b/arch/alpha/boot/bootp.c
index 2a542a506557..842e85776cc0 100644
--- a/arch/alpha/boot/bootp.c
+++ b/arch/alpha/boot/bootp.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * arch/alpha/boot/bootp.c
  *
@@ -15,15 +16,14 @@
 
 #include <asm/console.h>
 #include <asm/hwrpb.h>
-#include <asm/pgtable.h>
 #include <asm/io.h>
 
-#include <stdarg.h>
+#include <linux/stdarg.h>
 
 #include "ksize.h"
 
 extern unsigned long switch_to_osf_pal(unsigned long nr,
-	struct pcb_struct * pcb_va, struct pcb_struct * pcb_pa,
+	struct pcb_struct *pcb_va, struct pcb_struct *pcb_pa,
 	unsigned long *vptb);
 
 extern void move_stack(unsigned long new_stack);
diff --git a/arch/alpha/boot/bootpz.c b/arch/alpha/boot/bootpz.c
index d6ad191698da..c6079308eab3 100644
--- a/arch/alpha/boot/bootpz.c
+++ b/arch/alpha/boot/bootpz.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * arch/alpha/boot/bootpz.c
  *
@@ -17,10 +18,9 @@
 
 #include <asm/console.h>
 #include <asm/hwrpb.h>
-#include <asm/pgtable.h>
 #include <asm/io.h>
 
-#include <stdarg.h>
+#include <linux/stdarg.h>
 
 #include "kzsize.h"
 
@@ -200,7 +200,7 @@ extern char _end;
 	START_ADDR	KSEG address of the entry point of kernel code.
 
 	ZERO_PGE	KSEG address of page full of zeroes, but 
-			upon entry to kerne cvan be expected
+			upon entry to kernel, it can be expected
 			to hold the parameter list and possible
 			INTRD information.
 
diff --git a/arch/alpha/boot/head.S b/arch/alpha/boot/head.S
index 8efb26686d47..06a7c95fe9ad 100644
--- a/arch/alpha/boot/head.S
+++ b/arch/alpha/boot/head.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * arch/alpha/boot/head.S
  *
diff --git a/arch/alpha/boot/main.c b/arch/alpha/boot/main.c
index 3baf2d1e908d..22a1cb0264af 100644
--- a/arch/alpha/boot/main.c
+++ b/arch/alpha/boot/main.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * arch/alpha/boot/main.c
  *
@@ -13,13 +14,11 @@
 
 #include <asm/console.h>
 #include <asm/hwrpb.h>
-#include <asm/pgtable.h>
 
-#include <stdarg.h>
+#include <linux/stdarg.h>
 
 #include "ksize.h"
 
-extern int vsprintf(char *, const char *, va_list);
 extern unsigned long switch_to_osf_pal(unsigned long nr,
 	struct pcb_struct * pcb_va, struct pcb_struct * pcb_pa,
 	unsigned long *vptb);
diff --git a/arch/alpha/boot/misc.c b/arch/alpha/boot/misc.c
index 3ff9a957a25c..1ab91852d9f7 100644
--- a/arch/alpha/boot/misc.c
+++ b/arch/alpha/boot/misc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * misc.c
  * 
@@ -21,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 #define memzero(s,n)	memset ((s),0,(n))
 #define puts		srm_printk
@@ -29,7 +30,7 @@ extern long srm_printk(const char *, ...)
      __attribute__ ((format (printf, 1, 2)));
 
 /*
- * gzip delarations
+ * gzip declarations
  */
 #define OF(args)  args
 #define STATIC static
@@ -88,8 +89,6 @@ static ulg output_ptr;
 static ulg bytes_out;
 
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern int end;
 static ulg free_mem_ptr;
diff --git a/arch/alpha/boot/stdio.c b/arch/alpha/boot/stdio.c
new file mode 100644
index 000000000000..faa5234b90b8
--- /dev/null
+++ b/arch/alpha/boot/stdio.c
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) Paul Mackerras 1997.
+ */
+#include <linux/string.h>
+#include <linux/stdarg.h>
+
+size_t strnlen(const char * s, size_t count)
+{
+	const char *sc;
+
+	for (sc = s; count-- && *sc != '\0'; ++sc)
+		/* nothing */;
+	return sc - s;
+}
+
+# define do_div(n, base) ({						\
+	unsigned int __base = (base);					\
+	unsigned int __rem;						\
+	__rem = ((unsigned long long)(n)) % __base;			\
+	(n) = ((unsigned long long)(n)) / __base;			\
+	__rem;								\
+})
+
+
+static int skip_atoi(const char **s)
+{
+	int i, c;
+
+	for (i = 0; '0' <= (c = **s) && c <= '9'; ++*s)
+		i = i*10 + c - '0';
+	return i;
+}
+
+#define ZEROPAD	1		/* pad with zero */
+#define SIGN	2		/* unsigned/signed long */
+#define PLUS	4		/* show plus */
+#define SPACE	8		/* space if plus */
+#define LEFT	16		/* left justified */
+#define SPECIAL	32		/* 0x */
+#define LARGE	64		/* use 'ABCDEF' instead of 'abcdef' */
+
+static char * number(char * str, unsigned long long num, int base, int size, int precision, int type)
+{
+	char c, sign, tmp[66];
+	const char *digits = "0123456789abcdefghijklmnopqrstuvwxyz";
+	int i;
+
+	if (type & LARGE)
+		digits = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ";
+	if (type & LEFT)
+		type &= ~ZEROPAD;
+	if (base < 2 || base > 36)
+		return 0;
+	c = (type & ZEROPAD) ? '0' : ' ';
+	sign = 0;
+	if (type & SIGN) {
+		if ((signed long long)num < 0) {
+			sign = '-';
+			num = - (signed long long)num;
+			size--;
+		} else if (type & PLUS) {
+			sign = '+';
+			size--;
+		} else if (type & SPACE) {
+			sign = ' ';
+			size--;
+		}
+	}
+	if (type & SPECIAL) {
+		if (base == 16)
+			size -= 2;
+		else if (base == 8)
+			size--;
+	}
+	i = 0;
+	if (num == 0)
+		tmp[i++]='0';
+	else while (num != 0) {
+		tmp[i++] = digits[do_div(num, base)];
+	}
+	if (i > precision)
+		precision = i;
+	size -= precision;
+	if (!(type&(ZEROPAD+LEFT)))
+		while (size-- > 0)
+			*str++ = ' ';
+	if (sign)
+		*str++ = sign;
+	if (type & SPECIAL) {
+		if (base==8)
+			*str++ = '0';
+		else if (base == 16) {
+			*str++ = '0';
+			*str++ = digits[33];
+		}
+	}
+	if (!(type & LEFT))
+		while (size-- > 0)
+			*str++ = c;
+	while (i < precision--)
+		*str++ = '0';
+	while (i-- > 0)
+		*str++ = tmp[i];
+	while (size-- > 0)
+		*str++ = ' ';
+	return str;
+}
+
+int vsprintf(char *buf, const char *fmt, va_list args)
+{
+	int len;
+	unsigned long long num;
+	int i, base;
+	char * str;
+	const char *s;
+
+	int flags;		/* flags to number() */
+
+	int field_width;	/* width of output field */
+	int precision;		/* min. # of digits for integers; max
+				   number of chars for from string */
+	int qualifier;		/* 'h', 'l', or 'L' for integer fields */
+	                        /* 'z' support added 23/7/1999 S.H.    */
+				/* 'z' changed to 'Z' --davidm 1/25/99 */
+
+
+	for (str = buf ; *fmt ; ++fmt) {
+		if (*fmt != '%') {
+			*str++ = *fmt;
+			continue;
+		}
+
+		/* process flags */
+		flags = 0;
+		repeat:
+			++fmt;		/* this also skips first '%' */
+			switch (*fmt) {
+				case '-': flags |= LEFT; goto repeat;
+				case '+': flags |= PLUS; goto repeat;
+				case ' ': flags |= SPACE; goto repeat;
+				case '#': flags |= SPECIAL; goto repeat;
+				case '0': flags |= ZEROPAD; goto repeat;
+				}
+
+		/* get field width */
+		field_width = -1;
+		if ('0' <= *fmt && *fmt <= '9')
+			field_width = skip_atoi(&fmt);
+		else if (*fmt == '*') {
+			++fmt;
+			/* it's the next argument */
+			field_width = va_arg(args, int);
+			if (field_width < 0) {
+				field_width = -field_width;
+				flags |= LEFT;
+			}
+		}
+
+		/* get the precision */
+		precision = -1;
+		if (*fmt == '.') {
+			++fmt;
+			if ('0' <= *fmt && *fmt <= '9')
+				precision = skip_atoi(&fmt);
+			else if (*fmt == '*') {
+				++fmt;
+				/* it's the next argument */
+				precision = va_arg(args, int);
+			}
+			if (precision < 0)
+				precision = 0;
+		}
+
+		/* get the conversion qualifier */
+		qualifier = -1;
+		if (*fmt == 'l' && *(fmt + 1) == 'l') {
+			qualifier = 'q';
+			fmt += 2;
+		} else if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L'
+			|| *fmt == 'Z') {
+			qualifier = *fmt;
+			++fmt;
+		}
+
+		/* default base */
+		base = 10;
+
+		switch (*fmt) {
+		case 'c':
+			if (!(flags & LEFT))
+				while (--field_width > 0)
+					*str++ = ' ';
+			*str++ = (unsigned char) va_arg(args, int);
+			while (--field_width > 0)
+				*str++ = ' ';
+			continue;
+
+		case 's':
+			s = va_arg(args, char *);
+			if (!s)
+				s = "<NULL>";
+
+			len = strnlen(s, precision);
+
+			if (!(flags & LEFT))
+				while (len < field_width--)
+					*str++ = ' ';
+			for (i = 0; i < len; ++i)
+				*str++ = *s++;
+			while (len < field_width--)
+				*str++ = ' ';
+			continue;
+
+		case 'p':
+			if (field_width == -1) {
+				field_width = 2*sizeof(void *);
+				flags |= ZEROPAD;
+			}
+			str = number(str,
+				(unsigned long) va_arg(args, void *), 16,
+				field_width, precision, flags);
+			continue;
+
+
+		case 'n':
+			if (qualifier == 'l') {
+				long * ip = va_arg(args, long *);
+				*ip = (str - buf);
+			} else if (qualifier == 'Z') {
+				size_t * ip = va_arg(args, size_t *);
+				*ip = (str - buf);
+			} else {
+				int * ip = va_arg(args, int *);
+				*ip = (str - buf);
+			}
+			continue;
+
+		case '%':
+			*str++ = '%';
+			continue;
+
+		/* integer number formats - set up the flags and "break" */
+		case 'o':
+			base = 8;
+			break;
+
+		case 'X':
+			flags |= LARGE;
+		case 'x':
+			base = 16;
+			break;
+
+		case 'd':
+		case 'i':
+			flags |= SIGN;
+		case 'u':
+			break;
+
+		default:
+			*str++ = '%';
+			if (*fmt)
+				*str++ = *fmt;
+			else
+				--fmt;
+			continue;
+		}
+		if (qualifier == 'l') {
+			num = va_arg(args, unsigned long);
+			if (flags & SIGN)
+				num = (signed long) num;
+		} else if (qualifier == 'q') {
+			num = va_arg(args, unsigned long long);
+			if (flags & SIGN)
+				num = (signed long long) num;
+		} else if (qualifier == 'Z') {
+			num = va_arg(args, size_t);
+		} else if (qualifier == 'h') {
+			num = (unsigned short) va_arg(args, int);
+			if (flags & SIGN)
+				num = (signed short) num;
+		} else {
+			num = va_arg(args, unsigned int);
+			if (flags & SIGN)
+				num = (signed int) num;
+		}
+		str = number(str, num, base, field_width, precision, flags);
+	}
+	*str = '\0';
+	return str-buf;
+}
+
+int sprintf(char * buf, const char *fmt, ...)
+{
+	va_list args;
+	int i;
+
+	va_start(args, fmt);
+	i = vsprintf(buf, fmt, args);
+	va_end(args);
+	return i;
+}
diff --git a/arch/alpha/boot/tools/mkbb.c b/arch/alpha/boot/tools/mkbb.c
index 1185778e6a1e..fc47f33f8a44 100644
--- a/arch/alpha/boot/tools/mkbb.c
+++ b/arch/alpha/boot/tools/mkbb.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /* This utility makes a bootblock suitable for the SRM console/miniloader */
 
 /* Usage:
diff --git a/arch/alpha/boot/tools/objstrip.c b/arch/alpha/boot/tools/objstrip.c
index 367d53d031fc..7cf92d172dce 100644
--- a/arch/alpha/boot/tools/objstrip.c
+++ b/arch/alpha/boot/tools/objstrip.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * arch/alpha/boot/tools/objstrip.c
  *
@@ -27,6 +28,9 @@
 #include <linux/param.h>
 #ifdef __ELF__
 # include <linux/elf.h>
+# define elfhdr elf64_hdr
+# define elf_phdr elf64_phdr
+# define elf_check_arch(x) ((x)->e_machine == EM_ALPHA)
 #endif
 
 /* bootfile size must be multiple of BLOCK_SIZE: */
@@ -144,7 +148,7 @@ main (int argc, char *argv[])
 #ifdef __ELF__
     elf = (struct elfhdr *) buf;
 
-    if (elf->e_ident[0] == 0x7f && strncmp((char *)elf->e_ident + 1, "ELF", 3) == 0) {
+    if (memcmp(&elf->e_ident[EI_MAG0], ELFMAG, SELFMAG) == 0) {
 	if (elf->e_type != ET_EXEC) {
 	    fprintf(stderr, "%s: %s is not an ELF executable\n",
 		    prog_name, inname);
diff --git a/arch/alpha/configs/defconfig b/arch/alpha/configs/defconfig
new file mode 100644
index 000000000000..3280bd9e6578
--- /dev/null
+++ b/arch/alpha/configs/defconfig
@@ -0,0 +1,69 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_VERBOSE_MCHECK=y
+CONFIG_SRM_ENV=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_VLAN_8021Q=m
+CONFIG_PNP=y
+CONFIG_ISAPNP=y
+CONFIG_BLK_DEV_FD=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_PATA_ALI=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_ATA_GENERIC=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_VORTEX=y
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_TULIP=y
+CONFIG_TULIP_MMIO=y
+CONFIG_YELLOWFIN=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_EXT2_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFSD=m
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_ALPHA_LEGACY_START_ADDRESS=y
+CONFIG_MATHEMU=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_DEVTMPFS=y
diff --git a/arch/alpha/defconfig b/arch/alpha/defconfig
deleted file mode 100644
index 539e8b5a6cbd..000000000000
--- a/arch/alpha/defconfig
+++ /dev/null
@@ -1,76 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_VERBOSE_MCHECK=y
-CONFIG_SRM_ENV=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_VLAN_8021Q=m
-CONFIG_PNP=y
-CONFIG_ISAPNP=y
-CONFIG_BLK_DEV_FD=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_ALI15X3=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_CY82C693=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=y
-CONFIG_NET_TULIP=y
-CONFIG_DE2104X=m
-CONFIG_TULIP=y
-CONFIG_TULIP_MMIO=y
-CONFIG_NET_PCI=y
-CONFIG_YELLOWFIN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_RTC=y
-CONFIG_EXT2_FS=y
-CONFIG_REISERFS_FS=m
-CONFIG_AUTOFS_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_ALPHA_LEGACY_START_ADDRESS=y
-CONFIG_MATHEMU=y
-CONFIG_CRYPTO_HMAC=y
diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild
index 76aeb8fa551a..483965c5a4de 100644
--- a/arch/alpha/include/asm/Kbuild
+++ b/arch/alpha/include/asm/Kbuild
@@ -1,11 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
 
-
-generic-y += clkdev.h
-generic-y += cputime.h
-generic-y += exec.h
-generic-y += irq_work.h
+generated-y += syscall_table.h
+generic-y += agp.h
+generic-y += asm-offsets.h
+generic-y += kvm_para.h
 generic-y += mcs_spinlock.h
-generic-y += preempt.h
-generic-y += scatterlist.h
-generic-y += sections.h
-generic-y += trace_clock.h
+generic-y += text-patching.h
diff --git a/arch/alpha/include/asm/a.out-core.h b/arch/alpha/include/asm/a.out-core.h
deleted file mode 100644
index 9e33e92e524c..000000000000
--- a/arch/alpha/include/asm/a.out-core.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* a.out coredump register dumper
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_A_OUT_CORE_H
-#define _ASM_A_OUT_CORE_H
-
-#ifdef __KERNEL__
-
-#include <linux/user.h>
-
-/*
- * Fill in the user structure for an ECOFF core dump.
- */
-static inline void aout_dump_thread(struct pt_regs *pt, struct user *dump)
-{
-	/* switch stack follows right below pt_regs: */
-	struct switch_stack * sw = ((struct switch_stack *) pt) - 1;
-
-	dump->magic = CMAGIC;
-	dump->start_code  = current->mm->start_code;
-	dump->start_data  = current->mm->start_data;
-	dump->start_stack = rdusp() & ~(PAGE_SIZE - 1);
-	dump->u_tsize = ((current->mm->end_code - dump->start_code)
-			 >> PAGE_SHIFT);
-	dump->u_dsize = ((current->mm->brk + PAGE_SIZE-1 - dump->start_data)
-			 >> PAGE_SHIFT);
-	dump->u_ssize = (current->mm->start_stack - dump->start_stack
-			 + PAGE_SIZE-1) >> PAGE_SHIFT;
-
-	/*
-	 * We store the registers in an order/format that is
-	 * compatible with DEC Unix/OSF/1 as this makes life easier
-	 * for gdb.
-	 */
-	dump->regs[EF_V0]  = pt->r0;
-	dump->regs[EF_T0]  = pt->r1;
-	dump->regs[EF_T1]  = pt->r2;
-	dump->regs[EF_T2]  = pt->r3;
-	dump->regs[EF_T3]  = pt->r4;
-	dump->regs[EF_T4]  = pt->r5;
-	dump->regs[EF_T5]  = pt->r6;
-	dump->regs[EF_T6]  = pt->r7;
-	dump->regs[EF_T7]  = pt->r8;
-	dump->regs[EF_S0]  = sw->r9;
-	dump->regs[EF_S1]  = sw->r10;
-	dump->regs[EF_S2]  = sw->r11;
-	dump->regs[EF_S3]  = sw->r12;
-	dump->regs[EF_S4]  = sw->r13;
-	dump->regs[EF_S5]  = sw->r14;
-	dump->regs[EF_S6]  = sw->r15;
-	dump->regs[EF_A3]  = pt->r19;
-	dump->regs[EF_A4]  = pt->r20;
-	dump->regs[EF_A5]  = pt->r21;
-	dump->regs[EF_T8]  = pt->r22;
-	dump->regs[EF_T9]  = pt->r23;
-	dump->regs[EF_T10] = pt->r24;
-	dump->regs[EF_T11] = pt->r25;
-	dump->regs[EF_RA]  = pt->r26;
-	dump->regs[EF_T12] = pt->r27;
-	dump->regs[EF_AT]  = pt->r28;
-	dump->regs[EF_SP]  = rdusp();
-	dump->regs[EF_PS]  = pt->ps;
-	dump->regs[EF_PC]  = pt->pc;
-	dump->regs[EF_GP]  = pt->gp;
-	dump->regs[EF_A0]  = pt->r16;
-	dump->regs[EF_A1]  = pt->r17;
-	dump->regs[EF_A2]  = pt->r18;
-	memcpy((char *)dump->regs + EF_SIZE, sw->fp, 32 * 8);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_A_OUT_CORE_H */
diff --git a/arch/alpha/include/asm/a.out.h b/arch/alpha/include/asm/a.out.h
deleted file mode 100644
index 9abbd2455306..000000000000
--- a/arch/alpha/include/asm/a.out.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __ALPHA_A_OUT_H__
-#define __ALPHA_A_OUT_H__
-
-#include <uapi/asm/a.out.h>
-
-
-/* Assume that start addresses below 4G belong to a TASO application.
-   Unfortunately, there is no proper bit in the exec header to check.
-   Worse, we have to notice the start address before swapping to use
-   /sbin/loader, which of course is _not_ a TASO application.  */
-#define SET_AOUT_PERSONALITY(BFPM, EX) \
-	set_personality (((BFPM->taso || EX.ah.entry < 0x100000000L \
-			   ? ADDR_LIMIT_32BIT : 0) | PER_OSF4))
-
-#endif /* __A_OUT_GNU_H__ */
diff --git a/arch/alpha/include/asm/agp.h b/arch/alpha/include/asm/agp.h
deleted file mode 100644
index a94d48b8677f..000000000000
--- a/arch/alpha/include/asm/agp.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef AGP_H
-#define AGP_H 1
-
-#include <asm/io.h>
-
-/* dummy for now */
-
-#define map_page_into_agp(page) 
-#define unmap_page_from_agp(page) 
-#define flush_agp_cache() mb()
-
-/* GATT allocation. Returns/accepts GATT kernel virtual address. */
-#define alloc_gatt_pages(order)		\
-	((char *)__get_free_pages(GFP_KERNEL, (order)))
-#define free_gatt_pages(table, order)	\
-	free_pages((unsigned long)(table), (order))
-
-#endif
diff --git a/arch/alpha/include/asm/agp_backend.h b/arch/alpha/include/asm/agp_backend.h
index 55dd44a2cea7..2718802407d6 100644
--- a/arch/alpha/include/asm/agp_backend.h
+++ b/arch/alpha/include/asm/agp_backend.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_AGP_BACKEND_H
 #define _ALPHA_AGP_BACKEND_H 1
 
diff --git a/arch/alpha/include/asm/asm-prototypes.h b/arch/alpha/include/asm/asm-prototypes.h
new file mode 100644
index 000000000000..c8ae46fc2e74
--- /dev/null
+++ b/arch/alpha/include/asm/asm-prototypes.h
@@ -0,0 +1,19 @@
+#include <linux/spinlock.h>
+
+#include <asm/checksum.h>
+#include <asm/console.h>
+#include <asm/page.h>
+#include <asm/string.h>
+#include <linux/uaccess.h>
+
+#include <asm-generic/asm-prototypes.h>
+
+extern void __divl(void);
+extern void __reml(void);
+extern void __divq(void);
+extern void __remq(void);
+extern void __divlu(void);
+extern void __remlu(void);
+extern void __divqu(void);
+extern void __remqu(void);
+extern unsigned long __udiv_qrnnd(unsigned long *, unsigned long, unsigned long , unsigned long);
diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h
index 8f8eafbedd7c..cbd9244571af 100644
--- a/arch/alpha/include/asm/atomic.h
+++ b/arch/alpha/include/asm/atomic.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_ATOMIC_H
 #define _ALPHA_ATOMIC_H
 
@@ -13,15 +14,23 @@
  * than regular operations.
  */
 
+/*
+ * To ensure dependency ordering is preserved for the _relaxed and
+ * _release atomics, an smp_mb() is unconditionally inserted into the
+ * _relaxed variants, which are used to build the barriered versions.
+ * Avoid redundant back-to-back fences in the _acquire and _fence
+ * versions.
+ */
+#define __atomic_acquire_fence()
+#define __atomic_post_full_fence()
 
-#define ATOMIC_INIT(i)		{ (i) }
 #define ATOMIC64_INIT(i)	{ (i) }
 
-#define atomic_read(v)		ACCESS_ONCE((v)->counter)
-#define atomic64_read(v)	ACCESS_ONCE((v)->counter)
+#define arch_atomic_read(v)	READ_ONCE((v)->counter)
+#define arch_atomic64_read(v)	READ_ONCE((v)->counter)
 
-#define atomic_set(v,i)		((v)->counter = (i))
-#define atomic64_set(v,i)	((v)->counter = (i))
+#define arch_atomic_set(v,i)	WRITE_ONCE((v)->counter, (i))
+#define arch_atomic64_set(v,i)	WRITE_ONCE((v)->counter, (i))
 
 /*
  * To get proper branch prediction for the main line, we must branch
@@ -29,13 +38,13 @@
  * branch back to restart the operation.
  */
 
-#define ATOMIC_OP(op)							\
-static __inline__ void atomic_##op(int i, atomic_t * v)			\
+#define ATOMIC_OP(op, asm_op)						\
+static __inline__ void arch_atomic_##op(int i, atomic_t * v)		\
 {									\
 	unsigned long temp;						\
 	__asm__ __volatile__(						\
 	"1:	ldl_l %0,%1\n"						\
-	"	" #op "l %0,%2,%0\n"					\
+	"	" #asm_op " %0,%2,%0\n"					\
 	"	stl_c %0,%1\n"						\
 	"	beq %0,2f\n"						\
 	".subsection 2\n"						\
@@ -45,15 +54,14 @@ static __inline__ void atomic_##op(int i, atomic_t * v)			\
 	:"Ir" (i), "m" (v->counter));					\
 }									\
 
-#define ATOMIC_OP_RETURN(op)						\
-static inline int atomic_##op##_return(int i, atomic_t *v)		\
+#define ATOMIC_OP_RETURN(op, asm_op)					\
+static inline int arch_atomic_##op##_return_relaxed(int i, atomic_t *v)	\
 {									\
 	long temp, result;						\
-	smp_mb();							\
 	__asm__ __volatile__(						\
 	"1:	ldl_l %0,%1\n"						\
-	"	" #op "l %0,%3,%2\n"					\
-	"	" #op "l %0,%3,%0\n"					\
+	"	" #asm_op " %0,%3,%2\n"					\
+	"	" #asm_op " %0,%3,%0\n"					\
 	"	stl_c %0,%1\n"						\
 	"	beq %0,2f\n"						\
 	".subsection 2\n"						\
@@ -65,13 +73,31 @@ static inline int atomic_##op##_return(int i, atomic_t *v)		\
 	return result;							\
 }
 
-#define ATOMIC64_OP(op)							\
-static __inline__ void atomic64_##op(long i, atomic64_t * v)		\
+#define ATOMIC_FETCH_OP(op, asm_op)					\
+static inline int arch_atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
 {									\
-	unsigned long temp;						\
+	long temp, result;						\
+	__asm__ __volatile__(						\
+	"1:	ldl_l %2,%1\n"						\
+	"	" #asm_op " %2,%3,%0\n"					\
+	"	stl_c %0,%1\n"						\
+	"	beq %0,2f\n"						\
+	".subsection 2\n"						\
+	"2:	br 1b\n"						\
+	".previous"							\
+	:"=&r" (temp), "=m" (v->counter), "=&r" (result)		\
+	:"Ir" (i), "m" (v->counter) : "memory");			\
+	smp_mb();							\
+	return result;							\
+}
+
+#define ATOMIC64_OP(op, asm_op)						\
+static __inline__ void arch_atomic64_##op(s64 i, atomic64_t * v)	\
+{									\
+	s64 temp;							\
 	__asm__ __volatile__(						\
 	"1:	ldq_l %0,%1\n"						\
-	"	" #op "q %0,%2,%0\n"					\
+	"	" #asm_op " %0,%2,%0\n"					\
 	"	stq_c %0,%1\n"						\
 	"	beq %0,2f\n"						\
 	".subsection 2\n"						\
@@ -81,15 +107,15 @@ static __inline__ void atomic64_##op(long i, atomic64_t * v)		\
 	:"Ir" (i), "m" (v->counter));					\
 }									\
 
-#define ATOMIC64_OP_RETURN(op)						\
-static __inline__ long atomic64_##op##_return(long i, atomic64_t * v)	\
+#define ATOMIC64_OP_RETURN(op, asm_op)					\
+static __inline__ s64							\
+arch_atomic64_##op##_return_relaxed(s64 i, atomic64_t * v)		\
 {									\
-	long temp, result;						\
-	smp_mb();							\
+	s64 temp, result;						\
 	__asm__ __volatile__(						\
 	"1:	ldq_l %0,%1\n"						\
-	"	" #op "q %0,%3,%2\n"					\
-	"	" #op "q %0,%3,%0\n"					\
+	"	" #asm_op " %0,%3,%2\n"					\
+	"	" #asm_op " %0,%3,%0\n"					\
 	"	stq_c %0,%1\n"						\
 	"	beq %0,2f\n"						\
 	".subsection 2\n"						\
@@ -101,37 +127,80 @@ static __inline__ long atomic64_##op##_return(long i, atomic64_t * v)	\
 	return result;							\
 }
 
-#define ATOMIC_OPS(opg)							\
-	ATOMIC_OP(opg)							\
-	ATOMIC_OP_RETURN(opg)						\
-	ATOMIC64_OP(opg)						\
-	ATOMIC64_OP_RETURN(opg)
+#define ATOMIC64_FETCH_OP(op, asm_op)					\
+static __inline__ s64							\
+arch_atomic64_fetch_##op##_relaxed(s64 i, atomic64_t * v)		\
+{									\
+	s64 temp, result;						\
+	__asm__ __volatile__(						\
+	"1:	ldq_l %2,%1\n"						\
+	"	" #asm_op " %2,%3,%0\n"					\
+	"	stq_c %0,%1\n"						\
+	"	beq %0,2f\n"						\
+	".subsection 2\n"						\
+	"2:	br 1b\n"						\
+	".previous"							\
+	:"=&r" (temp), "=m" (v->counter), "=&r" (result)		\
+	:"Ir" (i), "m" (v->counter) : "memory");			\
+	smp_mb();							\
+	return result;							\
+}
+
+#define ATOMIC_OPS(op)							\
+	ATOMIC_OP(op, op##l)						\
+	ATOMIC_OP_RETURN(op, op##l)					\
+	ATOMIC_FETCH_OP(op, op##l)					\
+	ATOMIC64_OP(op, op##q)						\
+	ATOMIC64_OP_RETURN(op, op##q)					\
+	ATOMIC64_FETCH_OP(op, op##q)
 
 ATOMIC_OPS(add)
 ATOMIC_OPS(sub)
 
+#define arch_atomic_add_return_relaxed		arch_atomic_add_return_relaxed
+#define arch_atomic_sub_return_relaxed		arch_atomic_sub_return_relaxed
+#define arch_atomic_fetch_add_relaxed		arch_atomic_fetch_add_relaxed
+#define arch_atomic_fetch_sub_relaxed		arch_atomic_fetch_sub_relaxed
+
+#define arch_atomic64_add_return_relaxed	arch_atomic64_add_return_relaxed
+#define arch_atomic64_sub_return_relaxed	arch_atomic64_sub_return_relaxed
+#define arch_atomic64_fetch_add_relaxed		arch_atomic64_fetch_add_relaxed
+#define arch_atomic64_fetch_sub_relaxed		arch_atomic64_fetch_sub_relaxed
+
+#define arch_atomic_andnot			arch_atomic_andnot
+#define arch_atomic64_andnot			arch_atomic64_andnot
+
 #undef ATOMIC_OPS
+#define ATOMIC_OPS(op, asm)						\
+	ATOMIC_OP(op, asm)						\
+	ATOMIC_FETCH_OP(op, asm)					\
+	ATOMIC64_OP(op, asm)						\
+	ATOMIC64_FETCH_OP(op, asm)
+
+ATOMIC_OPS(and, and)
+ATOMIC_OPS(andnot, bic)
+ATOMIC_OPS(or, bis)
+ATOMIC_OPS(xor, xor)
+
+#define arch_atomic_fetch_and_relaxed		arch_atomic_fetch_and_relaxed
+#define arch_atomic_fetch_andnot_relaxed	arch_atomic_fetch_andnot_relaxed
+#define arch_atomic_fetch_or_relaxed		arch_atomic_fetch_or_relaxed
+#define arch_atomic_fetch_xor_relaxed		arch_atomic_fetch_xor_relaxed
+
+#define arch_atomic64_fetch_and_relaxed		arch_atomic64_fetch_and_relaxed
+#define arch_atomic64_fetch_andnot_relaxed	arch_atomic64_fetch_andnot_relaxed
+#define arch_atomic64_fetch_or_relaxed		arch_atomic64_fetch_or_relaxed
+#define arch_atomic64_fetch_xor_relaxed		arch_atomic64_fetch_xor_relaxed
+
+#undef ATOMIC_OPS
+#undef ATOMIC64_FETCH_OP
 #undef ATOMIC64_OP_RETURN
 #undef ATOMIC64_OP
+#undef ATOMIC_FETCH_OP
 #undef ATOMIC_OP_RETURN
 #undef ATOMIC_OP
 
-#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
-
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-/**
- * __atomic_add_unless - add unless the number is a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
- */
-static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
+static __inline__ int arch_atomic_fetch_add_unless(atomic_t *v, int a, int u)
 {
 	int c, new, old;
 	smp_mb();
@@ -152,49 +221,34 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
 	smp_mb();
 	return old;
 }
+#define arch_atomic_fetch_add_unless arch_atomic_fetch_add_unless
 
-
-/**
- * atomic64_add_unless - add unless the number is a given value
- * @v: pointer of type atomic64_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns true iff @v was not @u.
- */
-static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
+static __inline__ s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
 {
-	long c, tmp;
+	s64 c, new, old;
 	smp_mb();
 	__asm__ __volatile__(
-	"1:	ldq_l	%[tmp],%[mem]\n"
-	"	cmpeq	%[tmp],%[u],%[c]\n"
-	"	addq	%[tmp],%[a],%[tmp]\n"
+	"1:	ldq_l	%[old],%[mem]\n"
+	"	cmpeq	%[old],%[u],%[c]\n"
+	"	addq	%[old],%[a],%[new]\n"
 	"	bne	%[c],2f\n"
-	"	stq_c	%[tmp],%[mem]\n"
-	"	beq	%[tmp],3f\n"
+	"	stq_c	%[new],%[mem]\n"
+	"	beq	%[new],3f\n"
 	"2:\n"
 	".subsection 2\n"
 	"3:	br	1b\n"
 	".previous"
-	: [tmp] "=&r"(tmp), [c] "=&r"(c)
+	: [old] "=&r"(old), [new] "=&r"(new), [c] "=&r"(c)
 	: [mem] "m"(*v), [a] "rI"(a), [u] "rI"(u)
 	: "memory");
 	smp_mb();
-	return !c;
+	return old;
 }
+#define arch_atomic64_fetch_add_unless arch_atomic64_fetch_add_unless
 
-/*
- * atomic64_dec_if_positive - decrement by 1 if old value positive
- * @v: pointer of type atomic_t
- *
- * The function returns the old value of *v minus 1, even if
- * the atomic variable, v, was not decremented.
- */
-static inline long atomic64_dec_if_positive(atomic64_t *v)
+static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
 {
-	long old, tmp;
+	s64 old, tmp;
 	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldq_l	%[old],%[mem]\n"
@@ -212,31 +266,6 @@ static inline long atomic64_dec_if_positive(atomic64_t *v)
 	smp_mb();
 	return old - 1;
 }
-
-#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
-
-#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
-#define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0)
-
-#define atomic_dec_return(v) atomic_sub_return(1,(v))
-#define atomic64_dec_return(v) atomic64_sub_return(1,(v))
-
-#define atomic_inc_return(v) atomic_add_return(1,(v))
-#define atomic64_inc_return(v) atomic64_add_return(1,(v))
-
-#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
-#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0)
-
-#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
-#define atomic64_inc_and_test(v) (atomic64_add_return(1, (v)) == 0)
-
-#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
-#define atomic64_dec_and_test(v) (atomic64_sub_return(1, (v)) == 0)
-
-#define atomic_inc(v) atomic_add(1,(v))
-#define atomic64_inc(v) atomic64_add(1,(v))
-
-#define atomic_dec(v) atomic_sub(1,(v))
-#define atomic64_dec(v) atomic64_sub(1,(v))
+#define arch_atomic64_dec_if_positive arch_atomic64_dec_if_positive
 
 #endif /* _ALPHA_ATOMIC_H */
diff --git a/arch/alpha/include/asm/barrier.h b/arch/alpha/include/asm/barrier.h
index 77516c87255d..c56bfffc9918 100644
--- a/arch/alpha/include/asm/barrier.h
+++ b/arch/alpha/include/asm/barrier.h
@@ -1,64 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __BARRIER_H
 #define __BARRIER_H
 
-#include <asm/compiler.h>
-
 #define mb()	__asm__ __volatile__("mb": : :"memory")
 #define rmb()	__asm__ __volatile__("mb": : :"memory")
 #define wmb()	__asm__ __volatile__("wmb": : :"memory")
 
-/**
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier.  All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads.  This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies.  See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	b = 2;
- *	memory_barrier();
- *	p = &b;				q = p;
- *					read_barrier_depends();
- *					d = *q;
- * </programlisting>
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends().  However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	a = 2;
- *	memory_barrier();
- *	b = 3;				y = b;
- *					read_barrier_depends();
- *					x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b".  Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
- * in cases like this where there are no data dependencies.
- */
-#define read_barrier_depends() __asm__ __volatile__("mb": : :"memory")
+#define __smp_load_acquire(p)						\
+({									\
+	compiletime_assert_atomic_type(*p);				\
+	__READ_ONCE(*p);						\
+})
 
 #ifdef CONFIG_SMP
 #define __ASM_SMP_MB	"\tmb\n"
diff --git a/arch/alpha/include/asm/bitops.h b/arch/alpha/include/asm/bitops.h
index 4bdfbd444e63..76e4343c090f 100644
--- a/arch/alpha/include/asm/bitops.h
+++ b/arch/alpha/include/asm/bitops.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_BITOPS_H
 #define _ALPHA_BITOPS_H
 
@@ -45,8 +46,8 @@ set_bit(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static inline void
-__set_bit(unsigned long nr, volatile void * addr)
+static __always_inline void
+arch___set_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	int *m = ((int *) addr) + (nr >> 5);
 
@@ -81,8 +82,8 @@ clear_bit_unlock(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static __inline__ void
-__clear_bit(unsigned long nr, volatile void * addr)
+static __always_inline void
+arch___clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	int *m = ((int *) addr) + (nr >> 5);
 
@@ -93,7 +94,7 @@ static inline void
 __clear_bit_unlock(unsigned long nr, volatile void * addr)
 {
 	smp_mb();
-	__clear_bit(nr, addr);
+	arch___clear_bit(nr, addr);
 }
 
 static inline void
@@ -117,8 +118,8 @@ change_bit(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static __inline__ void
-__change_bit(unsigned long nr, volatile void * addr)
+static __always_inline void
+arch___change_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	int *m = ((int *) addr) + (nr >> 5);
 
@@ -185,8 +186,8 @@ test_and_set_bit_lock(unsigned long nr, volatile void *addr)
 /*
  * WARNING: non atomic version.
  */
-static inline int
-__test_and_set_bit(unsigned long nr, volatile void * addr)
+static __always_inline bool
+arch___test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = 1 << (nr & 0x1f);
 	int *m = ((int *) addr) + (nr >> 5);
@@ -229,8 +230,8 @@ test_and_clear_bit(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static inline int
-__test_and_clear_bit(unsigned long nr, volatile void * addr)
+static __always_inline bool
+arch___test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = 1 << (nr & 0x1f);
 	int *m = ((int *) addr) + (nr >> 5);
@@ -271,8 +272,8 @@ test_and_change_bit(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static __inline__ int
-__test_and_change_bit(unsigned long nr, volatile void * addr)
+static __always_inline bool
+arch___test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = 1 << (nr & 0x1f);
 	int *m = ((int *) addr) + (nr >> 5);
@@ -282,10 +283,27 @@ __test_and_change_bit(unsigned long nr, volatile void * addr)
 	return (old & mask) != 0;
 }
 
-static inline int
-test_bit(int nr, const volatile void * addr)
+#define arch_test_bit generic_test_bit
+#define arch_test_bit_acquire generic_test_bit_acquire
+
+static inline bool xor_unlock_is_negative_byte(unsigned long mask,
+		volatile unsigned long *p)
 {
-	return (1UL & (((const int *) addr)[nr >> 5] >> (nr & 31))) != 0UL;
+	unsigned long temp, old;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%4\n"
+	"	mov %0,%2\n"
+	"	xor %0,%3,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (*p), "=&r" (old)
+	:"Ir" (mask), "m" (*p));
+
+	return (old & BIT(7)) != 0;
 }
 
 /*
@@ -310,7 +328,7 @@ static inline unsigned long ffz_b(unsigned long x)
 	return sum;
 }
 
-static inline unsigned long ffz(unsigned long word)
+static inline unsigned long __attribute_const__ ffz(unsigned long word)
 {
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
 	/* Whee.  EV67 can calculate it directly.  */
@@ -330,7 +348,7 @@ static inline unsigned long ffz(unsigned long word)
 /*
  * __ffs = Find First set bit in word.  Undefined if no set bit exists.
  */
-static inline unsigned long __ffs(unsigned long word)
+static inline __attribute_const__ unsigned long __ffs(unsigned long word)
 {
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
 	/* Whee.  EV67 can calculate it directly.  */
@@ -355,7 +373,7 @@ static inline unsigned long __ffs(unsigned long word)
  * differs in spirit from the above __ffs.
  */
 
-static inline int ffs(int word)
+static inline __attribute_const__ int ffs(int word)
 {
 	int result = __ffs(word) + 1;
 	return word ? result : 0;
@@ -365,14 +383,14 @@ static inline int ffs(int word)
  * fls: find last bit set.
  */
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
-static inline int fls64(unsigned long word)
+static inline __attribute_const__ int fls64(unsigned long word)
 {
 	return 64 - __kernel_ctlz(word);
 }
 #else
 extern const unsigned char __flsm1_tab[256];
 
-static inline int fls64(unsigned long x)
+static inline __attribute_const__ int fls64(unsigned long x)
 {
 	unsigned long t, a, r;
 
@@ -385,14 +403,14 @@ static inline int fls64(unsigned long x)
 }
 #endif
 
-static inline unsigned long __fls(unsigned long x)
+static inline __attribute_const__ unsigned long __fls(unsigned long x)
 {
 	return fls64(x) - 1;
 }
 
-static inline int fls(int x)
+static inline __attribute_const__ int fls(unsigned int x)
 {
-	return fls64((unsigned int) x);
+	return fls64(x);
 }
 
 /*
@@ -429,8 +447,6 @@ static inline unsigned int __arch_hweight8(unsigned int w)
 
 #endif /* __KERNEL__ */
 
-#include <asm-generic/bitops/find.h>
-
 #ifdef __KERNEL__
 
 /*
@@ -451,6 +467,8 @@ sched_find_first_bit(const unsigned long b[2])
 	return __ffs(tmp) + ofs;
 }
 
+#include <asm-generic/bitops/non-instrumented-non-atomic.h>
+
 #include <asm-generic/bitops/le.h>
 
 #include <asm-generic/bitops/ext2-atomic-setbit.h>
diff --git a/arch/alpha/include/asm/bug.h b/arch/alpha/include/asm/bug.h
index f091682e3cc8..b88ebdfedf7c 100644
--- a/arch/alpha/include/asm/bug.h
+++ b/arch/alpha/include/asm/bug.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_BUG_H
 #define _ALPHA_BUG_H
 
diff --git a/arch/alpha/include/asm/bugs.h b/arch/alpha/include/asm/bugs.h
deleted file mode 100644
index 78030d1c7e7e..000000000000
--- a/arch/alpha/include/asm/bugs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  include/asm-alpha/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-/*
- * I don't know of any alpha bugs yet.. Nice chip
- */
-
-static void check_bugs(void)
-{
-}
diff --git a/arch/alpha/include/asm/cache.h b/arch/alpha/include/asm/cache.h
index ad368a93a46a..6ce508c68907 100644
--- a/arch/alpha/include/asm/cache.h
+++ b/arch/alpha/include/asm/cache.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * include/asm-alpha/cache.h
  */
diff --git a/arch/alpha/include/asm/cacheflush.h b/arch/alpha/include/asm/cacheflush.h
index a9cb6aa447aa..36a7e924c3b9 100644
--- a/arch/alpha/include/asm/cacheflush.h
+++ b/arch/alpha/include/asm/cacheflush.h
@@ -1,21 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_CACHEFLUSH_H
 #define _ALPHA_CACHEFLUSH_H
 
 #include <linux/mm.h>
 
-/* Caches aren't brain-dead on the Alpha. */
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_cache_vmap(start, end)		do { } while (0)
-#define flush_cache_vunmap(start, end)		do { } while (0)
-
 /* Note that the following two definitions are _highly_ dependent
    on the contexts in which they are used in the kernel.  I personally
    think it is criminal how loosely defined these macros are.  */
@@ -47,7 +35,7 @@ extern void smp_imb(void);
 
 extern void __load_new_mm_context(struct mm_struct *);
 static inline void
-flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+flush_icache_user_page(struct vm_area_struct *vma, struct page *page,
 			unsigned long addr, int len)
 {
 	if (vma->vm_flags & VM_EXEC) {
@@ -58,20 +46,24 @@ flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
 			mm->context[smp_processor_id()] = 0;
 	}
 }
-#else
-extern void flush_icache_user_range(struct vm_area_struct *vma,
+#define flush_icache_user_page flush_icache_user_page
+#else /* CONFIG_SMP */
+extern void flush_icache_user_page(struct vm_area_struct *vma,
 		struct page *page, unsigned long addr, int len);
-#endif
+#define flush_icache_user_page flush_icache_user_page
+#endif /* CONFIG_SMP */
 
-/* This is used only in __do_fault and do_swap_page.  */
-#define flush_icache_page(vma, page) \
-  flush_icache_user_range((vma), (page), 0, 0)
+/*
+ * Both implementations of flush_icache_user_page flush the entire
+ * address space, so one call, no matter how many pages.
+ */
+static inline void flush_icache_pages(struct vm_area_struct *vma,
+		struct page *page, unsigned int nr)
+{
+	flush_icache_user_page(vma, page, 0, 0);
+}
+#define flush_icache_pages flush_icache_pages
 
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-do { memcpy(dst, src, len); \
-     flush_icache_user_range(vma, page, vaddr, len); \
-} while (0)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
+#include <asm-generic/cacheflush.h>
 
 #endif /* _ALPHA_CACHEFLUSH_H */
diff --git a/arch/alpha/include/asm/checksum.h b/arch/alpha/include/asm/checksum.h
index d3854bbf0a9e..99d631e146b2 100644
--- a/arch/alpha/include/asm/checksum.h
+++ b/arch/alpha/include/asm/checksum.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_CHECKSUM_H
 #define _ALPHA_CHECKSUM_H
 
@@ -13,14 +14,11 @@ extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
  * computes the checksum of the TCP/UDP pseudo-header
  * returns a 16-bit checksum, already complemented
  */
-extern __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-					   unsigned short len,
-					   unsigned short proto,
-					   __wsum sum);
+__sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+			  __u32 len, __u8 proto, __wsum sum);
 
 __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-				unsigned short len, unsigned short proto,
-				__wsum sum);
+			  __u32 len, __u8 proto, __wsum sum);
 
 /*
  * computes the checksum of a memory block at buff, length len,
@@ -43,9 +41,11 @@ extern __wsum csum_partial(const void *buff, int len, __wsum sum);
  * here even more important to align src and dst on a 32-bit (or even
  * better 64-bit) boundary
  */
-__wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *errp);
+#define _HAVE_ARCH_COPY_AND_CSUM_FROM_USER
+#define _HAVE_ARCH_CSUM_AND_COPY
+__wsum csum_and_copy_from_user(const void __user *src, void *dst, int len);
 
-__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
+__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len);
 
 
 /*
@@ -70,6 +70,5 @@ static inline __sum16 csum_fold(__wsum csum)
 #define _HAVE_ARCH_IPV6_CSUM
 extern __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 			       const struct in6_addr *daddr,
-			       __u32 len, unsigned short proto,
-			       __wsum sum);
+			       __u32 len, __u8 proto, __wsum sum);
 #endif
diff --git a/arch/alpha/include/asm/cmpxchg.h b/arch/alpha/include/asm/cmpxchg.h
index 429e8cd0d78e..ae1b96479d0c 100644
--- a/arch/alpha/include/asm/cmpxchg.h
+++ b/arch/alpha/include/asm/cmpxchg.h
@@ -1,71 +1,283 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_CMPXCHG_H
 #define _ALPHA_CMPXCHG_H
 
 /*
- * Atomic exchange routines.
+ * Atomic exchange.
+ * Since it can be used to implement critical sections
+ * it must clobber "memory" (also for interrupts in UP).
  */
 
-#define __ASM__MB
-#define ____xchg(type, args...)		__xchg ## type ## _local(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ## type ## _local(args)
-#include <asm/xchg.h>
+static inline unsigned long
+____xchg_u8(volatile char *m, unsigned long val)
+{
+	unsigned long ret, tmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%4,7,%3\n"
+	"	insbl	%1,%4,%1\n"
+	"1:	ldq_l	%2,0(%3)\n"
+	"	extbl	%2,%4,%0\n"
+	"	mskbl	%2,%4,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%3)\n"
+	"	beq	%2,2f\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+	: "r" ((long)m), "1" (val) : "memory");
+
+	return ret;
+}
+
+static inline unsigned long
+____xchg_u16(volatile short *m, unsigned long val)
+{
+	unsigned long ret, tmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%4,7,%3\n"
+	"	inswl	%1,%4,%1\n"
+	"1:	ldq_l	%2,0(%3)\n"
+	"	extwl	%2,%4,%0\n"
+	"	mskwl	%2,%4,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%3)\n"
+	"	beq	%2,2f\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+	: "r" ((long)m), "1" (val) : "memory");
+
+	return ret;
+}
+
+static inline unsigned long
+____xchg_u32(volatile int *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%4\n"
+	"	bis $31,%3,%1\n"
+	"	stl_c %1,%2\n"
+	"	beq %1,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	: "=&r" (val), "=&r" (dummy), "=m" (*m)
+	: "rI" (val), "m" (*m) : "memory");
+
+	return val;
+}
+
+static inline unsigned long
+____xchg_u64(volatile long *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%4\n"
+	"	bis $31,%3,%1\n"
+	"	stq_c %1,%2\n"
+	"	beq %1,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	: "=&r" (val), "=&r" (dummy), "=m" (*m)
+	: "rI" (val), "m" (*m) : "memory");
+
+	return val;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid xchg().  */
+extern void __xchg_called_with_bad_pointer(void);
+
+static __always_inline unsigned long
+____xchg(volatile void *ptr, unsigned long x, int size)
+{
+	return
+		size == 1 ? ____xchg_u8(ptr, x) :
+		size == 2 ? ____xchg_u16(ptr, x) :
+		size == 4 ? ____xchg_u32(ptr, x) :
+		size == 8 ? ____xchg_u64(ptr, x) :
+			(__xchg_called_with_bad_pointer(), x);
+}
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+static inline unsigned long
+____cmpxchg_u8(volatile char *m, unsigned char old, unsigned char new)
+{
+	unsigned long prev, tmp, cmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%5,7,%4\n"
+	"	insbl	%1,%5,%1\n"
+	"1:	ldq_l	%2,0(%4)\n"
+	"	extbl	%2,%5,%0\n"
+	"	cmpeq	%0,%6,%3\n"
+	"	beq	%3,2f\n"
+	"	mskbl	%2,%5,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%4)\n"
+	"	beq	%2,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+____cmpxchg_u16(volatile short *m, unsigned short old, unsigned short new)
+{
+	unsigned long prev, tmp, cmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%5,7,%4\n"
+	"	inswl	%1,%5,%1\n"
+	"1:	ldq_l	%2,0(%4)\n"
+	"	extwl	%2,%5,%0\n"
+	"	cmpeq	%0,%6,%3\n"
+	"	beq	%3,2f\n"
+	"	mskwl	%2,%5,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%4)\n"
+	"	beq	%2,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+____cmpxchg_u32(volatile int *m, int old, int new)
+{
+	unsigned long prev, cmp;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%5\n"
+	"	cmpeq %0,%3,%1\n"
+	"	beq %1,2f\n"
+	"	mov %4,%1\n"
+	"	stl_c %1,%2\n"
+	"	beq %1,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
+	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+____cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
+{
+	unsigned long prev, cmp;
+
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%5\n"
+	"	cmpeq %0,%3,%1\n"
+	"	beq %1,2f\n"
+	"	mov %4,%1\n"
+	"	stq_c %1,%2\n"
+	"	beq %1,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
+	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+	return prev;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static __always_inline unsigned long
+____cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
+	      int size)
+{
+	return
+		size == 1 ? ____cmpxchg_u8(ptr, old, new) :
+		size == 2 ? ____cmpxchg_u16(ptr, old, new) :
+		size == 4 ? ____cmpxchg_u32(ptr, old, new) :
+		size == 8 ? ____cmpxchg_u64(ptr, old, new) :
+			(__cmpxchg_called_with_bad_pointer(), old);
+}
 
 #define xchg_local(ptr, x)						\
 ({									\
 	__typeof__(*(ptr)) _x_ = (x);					\
-	(__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_,	\
-				       sizeof(*(ptr)));			\
+	(__typeof__(*(ptr))) ____xchg((ptr), (unsigned long)_x_,	\
+					       sizeof(*(ptr)));		\
 })
 
-#define cmpxchg_local(ptr, o, n)					\
+#define arch_cmpxchg_local(ptr, o, n)					\
 ({									\
 	__typeof__(*(ptr)) _o_ = (o);					\
 	__typeof__(*(ptr)) _n_ = (n);					\
-	(__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	\
+	(__typeof__(*(ptr))) ____cmpxchg((ptr), (unsigned long)_o_,	\
 					  (unsigned long)_n_,		\
 					  sizeof(*(ptr)));		\
 })
 
-#define cmpxchg64_local(ptr, o, n)					\
+#define arch_cmpxchg64_local(ptr, o, n)					\
 ({									\
 	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
 	cmpxchg_local((ptr), (o), (n));					\
 })
 
-#ifdef CONFIG_SMP
-#undef __ASM__MB
-#define __ASM__MB	"\tmb\n"
-#endif
-#undef ____xchg
-#undef ____cmpxchg
-#define ____xchg(type, args...)		__xchg ##type(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ##type(args)
-#include <asm/xchg.h>
-
-#define xchg(ptr, x)							\
+/*
+ * The leading and the trailing memory barriers guarantee that these
+ * operations are fully ordered.
+ */
+#define arch_xchg(ptr, x)						\
 ({									\
+	__typeof__(*(ptr)) __ret;					\
 	__typeof__(*(ptr)) _x_ = (x);					\
-	(__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_,		\
-				 sizeof(*(ptr)));			\
+	smp_mb();							\
+	__ret = (__typeof__(*(ptr)))					\
+		____xchg((ptr), (unsigned long)_x_, sizeof(*(ptr)));	\
+	smp_mb();							\
+	__ret;								\
 })
 
-#define cmpxchg(ptr, o, n)						\
+#define arch_cmpxchg(ptr, o, n)						\
 ({									\
+	__typeof__(*(ptr)) __ret;					\
 	__typeof__(*(ptr)) _o_ = (o);					\
 	__typeof__(*(ptr)) _n_ = (n);					\
-	(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,	\
-				    (unsigned long)_n_,	sizeof(*(ptr)));\
+	smp_mb();							\
+	__ret = (__typeof__(*(ptr))) ____cmpxchg((ptr),			\
+		(unsigned long)_o_, (unsigned long)_n_, sizeof(*(ptr)));\
+	smp_mb();							\
+	__ret;								\
 })
 
-#define cmpxchg64(ptr, o, n)						\
+#define arch_cmpxchg64(ptr, o, n)					\
 ({									\
 	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg((ptr), (o), (n));					\
+	arch_cmpxchg((ptr), (o), (n));					\
 })
 
-#undef __ASM__MB
-#undef ____cmpxchg
-
-#define __HAVE_ARCH_CMPXCHG 1
-
 #endif /* _ALPHA_CMPXCHG_H */
diff --git a/arch/alpha/include/asm/compiler.h b/arch/alpha/include/asm/compiler.h
index a7720b96bcc9..ae645959018a 100644
--- a/arch/alpha/include/asm/compiler.h
+++ b/arch/alpha/include/asm/compiler.h
@@ -1,17 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_COMPILER_H
 #define __ALPHA_COMPILER_H
 
 #include <uapi/asm/compiler.h>
 
-/* Some idiots over in <linux/compiler.h> thought inline should imply
-   always_inline.  This breaks stuff.  We'll include this file whenever
-   we run into such problems.  */
-
-#include <linux/compiler.h>
-#undef inline
-#undef __inline__
-#undef __inline
-#undef __always_inline
-#define __always_inline		inline __attribute__((always_inline))
-
 #endif /* __ALPHA_COMPILER_H */
diff --git a/arch/alpha/include/asm/console.h b/arch/alpha/include/asm/console.h
index f2b584fe0994..088b7b9eb15a 100644
--- a/arch/alpha/include/asm/console.h
+++ b/arch/alpha/include/asm/console.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __AXP_CONSOLE_H
 #define __AXP_CONSOLE_H
 
diff --git a/arch/alpha/include/asm/core_apecs.h b/arch/alpha/include/asm/core_apecs.h
deleted file mode 100644
index 6785ff7e02bc..000000000000
--- a/arch/alpha/include/asm/core_apecs.h
+++ /dev/null
@@ -1,517 +0,0 @@
-#ifndef __ALPHA_APECS__H__
-#define __ALPHA_APECS__H__
-
-#include <linux/types.h>
-#include <asm/compiler.h>
-
-/*
- * APECS is the internal name for the 2107x chipset which provides
- * memory controller and PCI access for the 21064 chip based systems.
- *
- * This file is based on:
- *
- * DECchip 21071-AA and DECchip 21072-AA Core Logic Chipsets
- * Data Sheet
- *
- * EC-N0648-72
- *
- *
- * david.rusling@reo.mts.dec.com Initial Version.
- *
- */
-
-/*
-   An AVANTI *might* be an XL, and an XL has only 27 bits of ISA address
-   that get passed through the PCI<->ISA bridge chip. So we've gotta use
-   both windows to max out the physical memory we can DMA to. Sigh...
-
-   If we try a window at 0 for 1GB as a work-around, we run into conflicts
-   with ISA/PCI bus memory which can't be relocated, like VGA aperture and
-   BIOS ROMs. So we must put the windows high enough to avoid these areas.
-
-   We put window 1 at BUS 64Mb for 64Mb, mapping physical 0 to 64Mb-1,
-   and window 2 at BUS 1Gb for 1Gb, mapping physical 0 to 1Gb-1.
-   Yes, this does map 0 to 64Mb-1 twice, but only window 1 will actually
-   be used for that range (via virt_to_bus()).
-
-   Note that we actually fudge the window 1 maximum as 48Mb instead of 64Mb,
-   to keep virt_to_bus() from returning an address in the first window, for
-   a data area that goes beyond the 64Mb first DMA window.  Sigh...
-   The fudge factor MUST match with <asm/dma.h> MAX_DMA_ADDRESS, but
-   we can't just use that here, because of header file looping... :-(
-
-   Window 1 will be used for all DMA from the ISA bus; yes, that does
-   limit what memory an ISA floppy or sound card or Ethernet can touch, but
-   it's also a known limitation on other platforms as well. We use the
-   same technique that is used on INTEL platforms with similar limitation:
-   set MAX_DMA_ADDRESS and clear some pages' DMAable flags during mem_init().
-   We trust that any ISA bus device drivers will *always* ask for DMAable
-   memory explicitly via kmalloc()/get_free_pages() flags arguments.
-
-   Note that most PCI bus devices' drivers do *not* explicitly ask for
-   DMAable memory; they count on being able to DMA to any memory they
-   get from kmalloc()/get_free_pages(). They will also use window 1 for
-   any physical memory accesses below 64Mb; the rest will be handled by
-   window 2, maxing out at 1Gb of memory. I trust this is enough... :-)
-
-   We hope that the area before the first window is large enough so that
-   there will be no overlap at the top end (64Mb). We *must* locate the
-   PCI cards' memory just below window 1, so that there's still the
-   possibility of being able to access it via SPARSE space. This is
-   important for cards such as the Matrox Millennium, whose Xserver
-   wants to access memory-mapped registers in byte and short lengths.
-
-   Note that the XL is treated differently from the AVANTI, even though
-   for most other things they are identical. It didn't seem reasonable to
-   make the AVANTI support pay for the limitations of the XL. It is true,
-   however, that an XL kernel will run on an AVANTI without problems.
-
-   %%% All of this should be obviated by the ability to route
-   everything through the iommu.
-*/
-
-/*
- * 21071-DA Control and Status registers.
- * These are used for PCI memory access.
- */
-#define APECS_IOC_DCSR                  (IDENT_ADDR + 0x1A0000000UL)
-#define APECS_IOC_PEAR                  (IDENT_ADDR + 0x1A0000020UL)
-#define APECS_IOC_SEAR                  (IDENT_ADDR + 0x1A0000040UL)
-#define APECS_IOC_DR1                   (IDENT_ADDR + 0x1A0000060UL)
-#define APECS_IOC_DR2                   (IDENT_ADDR + 0x1A0000080UL)
-#define APECS_IOC_DR3                   (IDENT_ADDR + 0x1A00000A0UL)
-
-#define APECS_IOC_TB1R                  (IDENT_ADDR + 0x1A00000C0UL)
-#define APECS_IOC_TB2R                  (IDENT_ADDR + 0x1A00000E0UL)
-
-#define APECS_IOC_PB1R                  (IDENT_ADDR + 0x1A0000100UL)
-#define APECS_IOC_PB2R                  (IDENT_ADDR + 0x1A0000120UL)
-
-#define APECS_IOC_PM1R                  (IDENT_ADDR + 0x1A0000140UL)
-#define APECS_IOC_PM2R                  (IDENT_ADDR + 0x1A0000160UL)
-
-#define APECS_IOC_HAXR0                 (IDENT_ADDR + 0x1A0000180UL)
-#define APECS_IOC_HAXR1                 (IDENT_ADDR + 0x1A00001A0UL)
-#define APECS_IOC_HAXR2                 (IDENT_ADDR + 0x1A00001C0UL)
-
-#define APECS_IOC_PMLT                  (IDENT_ADDR + 0x1A00001E0UL)
-
-#define APECS_IOC_TLBTAG0               (IDENT_ADDR + 0x1A0000200UL)
-#define APECS_IOC_TLBTAG1               (IDENT_ADDR + 0x1A0000220UL)
-#define APECS_IOC_TLBTAG2               (IDENT_ADDR + 0x1A0000240UL)
-#define APECS_IOC_TLBTAG3               (IDENT_ADDR + 0x1A0000260UL)
-#define APECS_IOC_TLBTAG4               (IDENT_ADDR + 0x1A0000280UL)
-#define APECS_IOC_TLBTAG5               (IDENT_ADDR + 0x1A00002A0UL)
-#define APECS_IOC_TLBTAG6               (IDENT_ADDR + 0x1A00002C0UL)
-#define APECS_IOC_TLBTAG7               (IDENT_ADDR + 0x1A00002E0UL)
-
-#define APECS_IOC_TLBDATA0              (IDENT_ADDR + 0x1A0000300UL)
-#define APECS_IOC_TLBDATA1              (IDENT_ADDR + 0x1A0000320UL)
-#define APECS_IOC_TLBDATA2              (IDENT_ADDR + 0x1A0000340UL)
-#define APECS_IOC_TLBDATA3              (IDENT_ADDR + 0x1A0000360UL)
-#define APECS_IOC_TLBDATA4              (IDENT_ADDR + 0x1A0000380UL)
-#define APECS_IOC_TLBDATA5              (IDENT_ADDR + 0x1A00003A0UL)
-#define APECS_IOC_TLBDATA6              (IDENT_ADDR + 0x1A00003C0UL)
-#define APECS_IOC_TLBDATA7              (IDENT_ADDR + 0x1A00003E0UL)
-
-#define APECS_IOC_TBIA                  (IDENT_ADDR + 0x1A0000400UL)
-
-
-/*
- * 21071-CA Control and Status registers.
- * These are used to program memory timing,
- *  configure memory and initialise the B-Cache.
- */
-#define APECS_MEM_GCR		        (IDENT_ADDR + 0x180000000UL)
-#define APECS_MEM_EDSR		        (IDENT_ADDR + 0x180000040UL)
-#define APECS_MEM_TAR  		        (IDENT_ADDR + 0x180000060UL)
-#define APECS_MEM_ELAR		        (IDENT_ADDR + 0x180000080UL)
-#define APECS_MEM_EHAR  		(IDENT_ADDR + 0x1800000a0UL)
-#define APECS_MEM_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)
-#define APECS_MEM_LDxLAR 		(IDENT_ADDR + 0x1800000e0UL)
-#define APECS_MEM_LDxHAR 		(IDENT_ADDR + 0x180000100UL)
-#define APECS_MEM_GTR    		(IDENT_ADDR + 0x180000200UL)
-#define APECS_MEM_RTR    		(IDENT_ADDR + 0x180000220UL)
-#define APECS_MEM_VFPR   		(IDENT_ADDR + 0x180000240UL)
-#define APECS_MEM_PDLDR  		(IDENT_ADDR + 0x180000260UL)
-#define APECS_MEM_PDhDR  		(IDENT_ADDR + 0x180000280UL)
-
-/* Bank x Base Address Register */
-#define APECS_MEM_B0BAR  		(IDENT_ADDR + 0x180000800UL)
-#define APECS_MEM_B1BAR  		(IDENT_ADDR + 0x180000820UL)
-#define APECS_MEM_B2BAR  		(IDENT_ADDR + 0x180000840UL)
-#define APECS_MEM_B3BAR  		(IDENT_ADDR + 0x180000860UL)
-#define APECS_MEM_B4BAR  		(IDENT_ADDR + 0x180000880UL)
-#define APECS_MEM_B5BAR  		(IDENT_ADDR + 0x1800008A0UL)
-#define APECS_MEM_B6BAR  		(IDENT_ADDR + 0x1800008C0UL)
-#define APECS_MEM_B7BAR  		(IDENT_ADDR + 0x1800008E0UL)
-#define APECS_MEM_B8BAR  		(IDENT_ADDR + 0x180000900UL)
-
-/* Bank x Configuration Register */
-#define APECS_MEM_B0BCR  		(IDENT_ADDR + 0x180000A00UL)
-#define APECS_MEM_B1BCR  		(IDENT_ADDR + 0x180000A20UL)
-#define APECS_MEM_B2BCR  		(IDENT_ADDR + 0x180000A40UL)
-#define APECS_MEM_B3BCR  		(IDENT_ADDR + 0x180000A60UL)
-#define APECS_MEM_B4BCR  		(IDENT_ADDR + 0x180000A80UL)
-#define APECS_MEM_B5BCR  		(IDENT_ADDR + 0x180000AA0UL)
-#define APECS_MEM_B6BCR  		(IDENT_ADDR + 0x180000AC0UL)
-#define APECS_MEM_B7BCR  		(IDENT_ADDR + 0x180000AE0UL)
-#define APECS_MEM_B8BCR  		(IDENT_ADDR + 0x180000B00UL)
-
-/* Bank x Timing Register A */
-#define APECS_MEM_B0TRA  		(IDENT_ADDR + 0x180000C00UL)
-#define APECS_MEM_B1TRA  		(IDENT_ADDR + 0x180000C20UL)
-#define APECS_MEM_B2TRA  		(IDENT_ADDR + 0x180000C40UL)
-#define APECS_MEM_B3TRA  		(IDENT_ADDR + 0x180000C60UL)
-#define APECS_MEM_B4TRA  		(IDENT_ADDR + 0x180000C80UL)
-#define APECS_MEM_B5TRA  		(IDENT_ADDR + 0x180000CA0UL)
-#define APECS_MEM_B6TRA  		(IDENT_ADDR + 0x180000CC0UL)
-#define APECS_MEM_B7TRA  		(IDENT_ADDR + 0x180000CE0UL)
-#define APECS_MEM_B8TRA  		(IDENT_ADDR + 0x180000D00UL)
-
-/* Bank x Timing Register B */
-#define APECS_MEM_B0TRB                 (IDENT_ADDR + 0x180000E00UL)
-#define APECS_MEM_B1TRB  		(IDENT_ADDR + 0x180000E20UL)
-#define APECS_MEM_B2TRB  		(IDENT_ADDR + 0x180000E40UL)
-#define APECS_MEM_B3TRB  		(IDENT_ADDR + 0x180000E60UL)
-#define APECS_MEM_B4TRB  		(IDENT_ADDR + 0x180000E80UL)
-#define APECS_MEM_B5TRB  		(IDENT_ADDR + 0x180000EA0UL)
-#define APECS_MEM_B6TRB  		(IDENT_ADDR + 0x180000EC0UL)
-#define APECS_MEM_B7TRB  		(IDENT_ADDR + 0x180000EE0UL)
-#define APECS_MEM_B8TRB  		(IDENT_ADDR + 0x180000F00UL)
-
-
-/*
- * Memory spaces:
- */
-#define APECS_IACK_SC		        (IDENT_ADDR + 0x1b0000000UL)
-#define APECS_CONF		        (IDENT_ADDR + 0x1e0000000UL)
-#define APECS_IO			(IDENT_ADDR + 0x1c0000000UL)
-#define APECS_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)
-#define APECS_DENSE_MEM		        (IDENT_ADDR + 0x300000000UL)
-
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define APECS_IOC_STAT0_CMD		0xf
-#define APECS_IOC_STAT0_ERR		(1<<4)
-#define APECS_IOC_STAT0_LOST		(1<<5)
-#define APECS_IOC_STAT0_THIT		(1<<6)
-#define APECS_IOC_STAT0_TREF		(1<<7)
-#define APECS_IOC_STAT0_CODE_SHIFT	8
-#define APECS_IOC_STAT0_CODE_MASK	0x7
-#define APECS_IOC_STAT0_P_NBR_SHIFT	13
-#define APECS_IOC_STAT0_P_NBR_MASK	0x7ffff
-
-#define APECS_HAE_ADDRESS		APECS_IOC_HAXR1
-
-
-/*
- * Data structure for handling APECS machine checks:
- */
-
-struct el_apecs_mikasa_sysdata_mcheck
-{
-	unsigned long coma_gcr;
-	unsigned long coma_edsr;
-	unsigned long coma_ter;
-	unsigned long coma_elar;
-	unsigned long coma_ehar;
-	unsigned long coma_ldlr;
-	unsigned long coma_ldhr;
-	unsigned long coma_base0;
-	unsigned long coma_base1;
-	unsigned long coma_base2;
-	unsigned long coma_base3;
-	unsigned long coma_cnfg0;
-	unsigned long coma_cnfg1;
-	unsigned long coma_cnfg2;
-	unsigned long coma_cnfg3;
-	unsigned long epic_dcsr;
-	unsigned long epic_pear;
-	unsigned long epic_sear;
-	unsigned long epic_tbr1;
-	unsigned long epic_tbr2;
-	unsigned long epic_pbr1;
-	unsigned long epic_pbr2;
-	unsigned long epic_pmr1;
-	unsigned long epic_pmr2;
-	unsigned long epic_harx1;
-	unsigned long epic_harx2;
-	unsigned long epic_pmlt;
-	unsigned long epic_tag0;
-	unsigned long epic_tag1;
-	unsigned long epic_tag2;
-	unsigned long epic_tag3;
-	unsigned long epic_tag4;
-	unsigned long epic_tag5;
-	unsigned long epic_tag6;
-	unsigned long epic_tag7;
-	unsigned long epic_data0;
-	unsigned long epic_data1;
-	unsigned long epic_data2;
-	unsigned long epic_data3;
-	unsigned long epic_data4;
-	unsigned long epic_data5;
-	unsigned long epic_data6;
-	unsigned long epic_data7;
-
-	unsigned long pceb_vid;
-	unsigned long pceb_did;
-	unsigned long pceb_revision;
-	unsigned long pceb_command;
-	unsigned long pceb_status;
-	unsigned long pceb_latency;
-	unsigned long pceb_control;
-	unsigned long pceb_arbcon;
-	unsigned long pceb_arbpri;
-
-	unsigned long esc_id;
-	unsigned long esc_revision;
-	unsigned long esc_int0;
-	unsigned long esc_int1;
-	unsigned long esc_elcr0;
-	unsigned long esc_elcr1;
-	unsigned long esc_last_eisa;
-	unsigned long esc_nmi_stat;
-
-	unsigned long pci_ir;
-	unsigned long pci_imr;
-	unsigned long svr_mgr;
-};
-
-/* This for the normal APECS machines.  */
-struct el_apecs_sysdata_mcheck
-{
-	unsigned long coma_gcr;
-	unsigned long coma_edsr;
-	unsigned long coma_ter;
-	unsigned long coma_elar;
-	unsigned long coma_ehar;
-	unsigned long coma_ldlr;
-	unsigned long coma_ldhr;
-	unsigned long coma_base0;
-	unsigned long coma_base1;
-	unsigned long coma_base2;
-	unsigned long coma_cnfg0;
-	unsigned long coma_cnfg1;
-	unsigned long coma_cnfg2;
-	unsigned long epic_dcsr;
-	unsigned long epic_pear;
-	unsigned long epic_sear;
-	unsigned long epic_tbr1;
-	unsigned long epic_tbr2;
-	unsigned long epic_pbr1;
-	unsigned long epic_pbr2;
-	unsigned long epic_pmr1;
-	unsigned long epic_pmr2;
-	unsigned long epic_harx1;
-	unsigned long epic_harx2;
-	unsigned long epic_pmlt;
-	unsigned long epic_tag0;
-	unsigned long epic_tag1;
-	unsigned long epic_tag2;
-	unsigned long epic_tag3;
-	unsigned long epic_tag4;
-	unsigned long epic_tag5;
-	unsigned long epic_tag6;
-	unsigned long epic_tag7;
-	unsigned long epic_data0;
-	unsigned long epic_data1;
-	unsigned long epic_data2;
-	unsigned long epic_data3;
-	unsigned long epic_data4;
-	unsigned long epic_data5;
-	unsigned long epic_data6;
-	unsigned long epic_data7;
-};
-
-struct el_apecs_procdata
-{
-	unsigned long paltemp[32];  /* PAL TEMP REGS. */
-	/* EV4-specific fields */
-	unsigned long exc_addr;     /* Address of excepting instruction. */
-	unsigned long exc_sum;      /* Summary of arithmetic traps. */
-	unsigned long exc_mask;     /* Exception mask (from exc_sum). */
-	unsigned long iccsr;        /* IBox hardware enables. */
-	unsigned long pal_base;     /* Base address for PALcode. */
-	unsigned long hier;         /* Hardware Interrupt Enable. */
-	unsigned long hirr;         /* Hardware Interrupt Request. */
-	unsigned long csr;          /* D-stream fault info. */
-	unsigned long dc_stat;      /* D-cache status (ECC/Parity Err). */
-	unsigned long dc_addr;      /* EV3 Phys Addr for ECC/DPERR. */
-	unsigned long abox_ctl;     /* ABox Control Register. */
-	unsigned long biu_stat;     /* BIU Status. */
-	unsigned long biu_addr;     /* BUI Address. */
-	unsigned long biu_ctl;      /* BIU Control. */
-	unsigned long fill_syndrome;/* For correcting ECC errors. */
-	unsigned long fill_addr;    /* Cache block which was being read */
-	unsigned long va;           /* Effective VA of fault or miss. */
-	unsigned long bc_tag;       /* Backup Cache Tag Probe Results.*/
-};
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the APECS machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here.  In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip	volatile int __force *
-#define vuip	volatile unsigned int __force *
-#define vulp	volatile unsigned long __force *
-
-#define APECS_SET_HAE						\
-	do {							\
-		if (addr >= (1UL << 24)) {			\
-			unsigned long msb = addr & 0xf8000000;	\
-			addr -= msb;				\
-			set_hae(msb);				\
-		}						\
-	} while (0)
-
-__EXTERN_INLINE unsigned int apecs_ioread8(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x00;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x00;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite8(u8 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x00;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x00;
-	}
-
-	w = __kernel_insbl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int apecs_ioread16(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x08;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x08;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite16(u16 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x08;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x08;
-	}
-
-	w = __kernel_inswl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int apecs_ioread32(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < APECS_DENSE_MEM)
-		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
-	return *(vuip)addr;
-}
-
-__EXTERN_INLINE void apecs_iowrite32(u32 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < APECS_DENSE_MEM)
-		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
-	*(vuip)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + APECS_IO);
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioremap(unsigned long addr,
-					    unsigned long size)
-{
-	return (void __iomem *)(addr + APECS_DENSE_MEM);
-}
-
-__EXTERN_INLINE int apecs_is_ioaddr(unsigned long addr)
-{
-	return addr >= IDENT_ADDR + 0x180000000UL;
-}
-
-__EXTERN_INLINE int apecs_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= APECS_DENSE_MEM;
-}
-
-#undef APECS_SET_HAE
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		apecs
-#define apecs_trivial_io_bw	0
-#define apecs_trivial_io_lq	0
-#define apecs_trivial_rw_bw	2
-#define apecs_trivial_rw_lq	1
-#define apecs_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_APECS__H__ */
diff --git a/arch/alpha/include/asm/core_cia.h b/arch/alpha/include/asm/core_cia.h
index 9e0516c0ca27..d26bdfb7ca3b 100644
--- a/arch/alpha/include/asm/core_cia.h
+++ b/arch/alpha/include/asm/core_cia.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_CIA__H__
 #define __ALPHA_CIA__H__
 
@@ -341,7 +342,7 @@ struct el_CIA_sysdata_mcheck {
 #define vuip	volatile unsigned int __force *
 #define vulp	volatile unsigned long __force *
 
-__EXTERN_INLINE unsigned int cia_ioread8(void __iomem *xaddr)
+__EXTERN_INLINE u8 cia_ioread8(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	unsigned long result, base_and_type;
@@ -373,7 +374,7 @@ __EXTERN_INLINE void cia_iowrite8(u8 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + base_and_type) = w;
 }
 
-__EXTERN_INLINE unsigned int cia_ioread16(void __iomem *xaddr)
+__EXTERN_INLINE u16 cia_ioread16(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	unsigned long result, base_and_type;
@@ -403,7 +404,7 @@ __EXTERN_INLINE void cia_iowrite16(u16 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + base_and_type) = w;
 }
 
-__EXTERN_INLINE unsigned int cia_ioread32(void __iomem *xaddr)
+__EXTERN_INLINE u32 cia_ioread32(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	if (addr < CIA_DENSE_MEM)
@@ -419,6 +420,22 @@ __EXTERN_INLINE void cia_iowrite32(u32 b, void __iomem *xaddr)
 	*(vuip)addr = b;
 }
 
+__EXTERN_INLINE u64 cia_ioread64(const void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < CIA_DENSE_MEM)
+		addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18;
+	return *(vulp)addr;
+}
+
+__EXTERN_INLINE void cia_iowrite64(u64 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < CIA_DENSE_MEM)
+		addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18;
+	*(vulp)addr = b;
+}
+
 __EXTERN_INLINE void __iomem *cia_ioportmap(unsigned long addr)
 {
 	return (void __iomem *)(addr + CIA_IO);
diff --git a/arch/alpha/include/asm/core_irongate.h b/arch/alpha/include/asm/core_irongate.h
index 24b2db541501..1c8906bf76c6 100644
--- a/arch/alpha/include/asm/core_irongate.h
+++ b/arch/alpha/include/asm/core_irongate.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_IRONGATE__H__
 #define __ALPHA_IRONGATE__H__
 
diff --git a/arch/alpha/include/asm/core_lca.h b/arch/alpha/include/asm/core_lca.h
deleted file mode 100644
index 8ee6c516279c..000000000000
--- a/arch/alpha/include/asm/core_lca.h
+++ /dev/null
@@ -1,361 +0,0 @@
-#ifndef __ALPHA_LCA__H__
-#define __ALPHA_LCA__H__
-
-#include <asm/compiler.h>
-#include <asm/mce.h>
-
-/*
- * Low Cost Alpha (LCA) definitions (these apply to 21066 and 21068,
- * for example).
- *
- * This file is based on:
- *
- *	DECchip 21066 and DECchip 21068 Alpha AXP Microprocessors
- *	Hardware Reference Manual; Digital Equipment Corp.; May 1994;
- *	Maynard, MA; Order Number: EC-N2681-71.
- */
-
-/*
- * NOTE: The LCA uses a Host Address Extension (HAE) register to access
- *	 PCI addresses that are beyond the first 27 bits of address
- *	 space.  Updating the HAE requires an external cycle (and
- *	 a memory barrier), which tends to be slow.  Instead of updating
- *	 it on each sparse memory access, we keep the current HAE value
- *	 cached in variable cache_hae.  Only if the cached HAE differs
- *	 from the desired HAE value do we actually updated HAE register.
- *	 The HAE register is preserved by the interrupt handler entry/exit
- *	 code, so this scheme works even in the presence of interrupts.
- *
- * Dense memory space doesn't require the HAE, but is restricted to
- * aligned 32 and 64 bit accesses.  Special Cycle and Interrupt
- * Acknowledge cycles may also require the use of the HAE.  The LCA
- * limits I/O address space to the bottom 24 bits of address space,
- * but this easily covers the 16 bit ISA I/O address space.
- */
-
-/*
- * NOTE 2! The memory operations do not set any memory barriers, as
- * it's not needed for cases like a frame buffer that is essentially
- * memory-like.  You need to do them by hand if the operations depend
- * on ordering.
- *
- * Similarly, the port I/O operations do a "mb" only after a write
- * operation: if an mb is needed before (as in the case of doing
- * memory mapped I/O first, and then a port I/O operation to the same
- * device), it needs to be done by hand.
- *
- * After the above has bitten me 100 times, I'll give up and just do
- * the mb all the time, but right now I'm hoping this will work out.
- * Avoiding mb's may potentially be a noticeable speed improvement,
- * but I can't honestly say I've tested it.
- *
- * Handling interrupts that need to do mb's to synchronize to
- * non-interrupts is another fun race area.  Don't do it (because if
- * you do, I'll have to do *everything* with interrupts disabled,
- * ugh).
- */
-
-/*
- * Memory Controller registers:
- */
-#define LCA_MEM_BCR0		(IDENT_ADDR + 0x120000000UL)
-#define LCA_MEM_BCR1		(IDENT_ADDR + 0x120000008UL)
-#define LCA_MEM_BCR2		(IDENT_ADDR + 0x120000010UL)
-#define LCA_MEM_BCR3		(IDENT_ADDR + 0x120000018UL)
-#define LCA_MEM_BMR0		(IDENT_ADDR + 0x120000020UL)
-#define LCA_MEM_BMR1		(IDENT_ADDR + 0x120000028UL)
-#define LCA_MEM_BMR2		(IDENT_ADDR + 0x120000030UL)
-#define LCA_MEM_BMR3		(IDENT_ADDR + 0x120000038UL)
-#define LCA_MEM_BTR0		(IDENT_ADDR + 0x120000040UL)
-#define LCA_MEM_BTR1		(IDENT_ADDR + 0x120000048UL)
-#define LCA_MEM_BTR2		(IDENT_ADDR + 0x120000050UL)
-#define LCA_MEM_BTR3		(IDENT_ADDR + 0x120000058UL)
-#define LCA_MEM_GTR		(IDENT_ADDR + 0x120000060UL)
-#define LCA_MEM_ESR		(IDENT_ADDR + 0x120000068UL)
-#define LCA_MEM_EAR		(IDENT_ADDR + 0x120000070UL)
-#define LCA_MEM_CAR		(IDENT_ADDR + 0x120000078UL)
-#define LCA_MEM_VGR		(IDENT_ADDR + 0x120000080UL)
-#define LCA_MEM_PLM		(IDENT_ADDR + 0x120000088UL)
-#define LCA_MEM_FOR		(IDENT_ADDR + 0x120000090UL)
-
-/*
- * I/O Controller registers:
- */
-#define LCA_IOC_HAE		(IDENT_ADDR + 0x180000000UL)
-#define LCA_IOC_CONF		(IDENT_ADDR + 0x180000020UL)
-#define LCA_IOC_STAT0		(IDENT_ADDR + 0x180000040UL)
-#define LCA_IOC_STAT1		(IDENT_ADDR + 0x180000060UL)
-#define LCA_IOC_TBIA		(IDENT_ADDR + 0x180000080UL)
-#define LCA_IOC_TB_ENA		(IDENT_ADDR + 0x1800000a0UL)
-#define LCA_IOC_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)
-#define LCA_IOC_PAR_DIS		(IDENT_ADDR + 0x1800000e0UL)
-#define LCA_IOC_W_BASE0		(IDENT_ADDR + 0x180000100UL)
-#define LCA_IOC_W_BASE1		(IDENT_ADDR + 0x180000120UL)
-#define LCA_IOC_W_MASK0		(IDENT_ADDR + 0x180000140UL)
-#define LCA_IOC_W_MASK1		(IDENT_ADDR + 0x180000160UL)
-#define LCA_IOC_T_BASE0		(IDENT_ADDR + 0x180000180UL)
-#define LCA_IOC_T_BASE1		(IDENT_ADDR + 0x1800001a0UL)
-#define LCA_IOC_TB_TAG0		(IDENT_ADDR + 0x188000000UL)
-#define LCA_IOC_TB_TAG1		(IDENT_ADDR + 0x188000020UL)
-#define LCA_IOC_TB_TAG2		(IDENT_ADDR + 0x188000040UL)
-#define LCA_IOC_TB_TAG3		(IDENT_ADDR + 0x188000060UL)
-#define LCA_IOC_TB_TAG4		(IDENT_ADDR + 0x188000070UL)
-#define LCA_IOC_TB_TAG5		(IDENT_ADDR + 0x1880000a0UL)
-#define LCA_IOC_TB_TAG6		(IDENT_ADDR + 0x1880000c0UL)
-#define LCA_IOC_TB_TAG7		(IDENT_ADDR + 0x1880000e0UL)
-
-/*
- * Memory spaces:
- */
-#define LCA_IACK_SC		(IDENT_ADDR + 0x1a0000000UL)
-#define LCA_CONF		(IDENT_ADDR + 0x1e0000000UL)
-#define LCA_IO			(IDENT_ADDR + 0x1c0000000UL)
-#define LCA_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)
-#define LCA_DENSE_MEM		(IDENT_ADDR + 0x300000000UL)
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define LCA_IOC_STAT0_CMD		0xf
-#define LCA_IOC_STAT0_ERR		(1<<4)
-#define LCA_IOC_STAT0_LOST		(1<<5)
-#define LCA_IOC_STAT0_THIT		(1<<6)
-#define LCA_IOC_STAT0_TREF		(1<<7)
-#define LCA_IOC_STAT0_CODE_SHIFT	8
-#define LCA_IOC_STAT0_CODE_MASK		0x7
-#define LCA_IOC_STAT0_P_NBR_SHIFT	13
-#define LCA_IOC_STAT0_P_NBR_MASK	0x7ffff
-
-#define LCA_HAE_ADDRESS		LCA_IOC_HAE
-
-/* LCA PMR Power Management register defines */
-#define LCA_PMR_ADDR	(IDENT_ADDR + 0x120000098UL)
-#define LCA_PMR_PDIV    0x7                     /* Primary clock divisor */
-#define LCA_PMR_ODIV    0x38                    /* Override clock divisor */
-#define LCA_PMR_INTO    0x40                    /* Interrupt override */
-#define LCA_PMR_DMAO    0x80                    /* DMA override */
-#define LCA_PMR_OCCEB   0xffff0000L             /* Override cycle counter - even bits */
-#define LCA_PMR_OCCOB   0xffff000000000000L     /* Override cycle counter - even bits */
-#define LCA_PMR_PRIMARY_MASK    0xfffffffffffffff8L
-
-/* LCA PMR Macros */
-
-#define LCA_READ_PMR        (*(volatile unsigned long *)LCA_PMR_ADDR)
-#define LCA_WRITE_PMR(d)    (*((volatile unsigned long *)LCA_PMR_ADDR) = (d))
-
-#define LCA_GET_PRIMARY(r)  ((r) & LCA_PMR_PDIV)
-#define LCA_GET_OVERRIDE(r) (((r) >> 3) & LCA_PMR_PDIV)
-#define LCA_SET_PRIMARY_CLOCK(r, c) ((r) = (((r) & LCA_PMR_PRIMARY_MASK)|(c)))
-
-/* LCA PMR Divisor values */
-#define LCA_PMR_DIV_1   0x0
-#define LCA_PMR_DIV_1_5 0x1
-#define LCA_PMR_DIV_2   0x2
-#define LCA_PMR_DIV_4   0x3
-#define LCA_PMR_DIV_8   0x4
-#define LCA_PMR_DIV_16  0x5
-#define LCA_PMR_DIV_MIN DIV_1
-#define LCA_PMR_DIV_MAX DIV_16
-
-
-/*
- * Data structure for handling LCA machine checks.  Correctable errors
- * result in a short logout frame, uncorrectable ones in a long one.
- */
-struct el_lca_mcheck_short {
-	struct el_common	h;		/* common logout header */
-	unsigned long		esr;		/* error-status register */
-	unsigned long		ear;		/* error-address register */
-	unsigned long		dc_stat;	/* dcache status register */
-	unsigned long		ioc_stat0;	/* I/O controller status register 0 */
-	unsigned long		ioc_stat1;	/* I/O controller status register 1 */
-};
-
-struct el_lca_mcheck_long {
-	struct el_common	h;		/* common logout header */
-	unsigned long		pt[31];		/* PAL temps */
-	unsigned long		exc_addr;	/* exception address */
-	unsigned long		pad1[3];
-	unsigned long		pal_base;	/* PALcode base address */
-	unsigned long		hier;		/* hw interrupt enable */
-	unsigned long		hirr;		/* hw interrupt request */
-	unsigned long		mm_csr;		/* MMU control & status */
-	unsigned long		dc_stat;	/* data cache status */
-	unsigned long		dc_addr;	/* data cache addr register */
-	unsigned long		abox_ctl;	/* address box control register */
-	unsigned long		esr;		/* error status register */
-	unsigned long		ear;		/* error address register */
-	unsigned long		car;		/* cache control register */
-	unsigned long		ioc_stat0;	/* I/O controller status register 0 */
-	unsigned long		ioc_stat1;	/* I/O controller status register 1 */
-	unsigned long		va;		/* virtual address register */
-};
-
-union el_lca {
-	struct el_common *		c;
-	struct el_lca_mcheck_long *	l;
-	struct el_lca_mcheck_short *	s;
-};
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the Noname machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here.  In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip	volatile int __force *
-#define vuip	volatile unsigned int __force *
-#define vulp	volatile unsigned long __force *
-
-#define LCA_SET_HAE						\
-	do {							\
-		if (addr >= (1UL << 24)) {			\
-			unsigned long msb = addr & 0xf8000000;	\
-			addr -= msb;				\
-			set_hae(msb);				\
-		}						\
-	} while (0)
-
-
-__EXTERN_INLINE unsigned int lca_ioread8(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x00;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x00;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x00;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x00;
-	}
-
-	w = __kernel_insbl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int lca_ioread16(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x08;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x08;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x08;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x08;
-	}
-
-	w = __kernel_inswl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int lca_ioread32(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < LCA_DENSE_MEM)
-		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
-	return *(vuip)addr;
-}
-
-__EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < LCA_DENSE_MEM)
-		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
-	*(vuip)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + LCA_IO);
-}
-
-__EXTERN_INLINE void __iomem *lca_ioremap(unsigned long addr,
-					  unsigned long size)
-{
-	return (void __iomem *)(addr + LCA_DENSE_MEM);
-}
-
-__EXTERN_INLINE int lca_is_ioaddr(unsigned long addr)
-{
-	return addr >= IDENT_ADDR + 0x120000000UL;
-}
-
-__EXTERN_INLINE int lca_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= LCA_DENSE_MEM;
-}
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		lca
-#define lca_trivial_rw_bw	2
-#define lca_trivial_rw_lq	1
-#define lca_trivial_io_bw	0
-#define lca_trivial_io_lq	0
-#define lca_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_LCA__H__ */
diff --git a/arch/alpha/include/asm/core_marvel.h b/arch/alpha/include/asm/core_marvel.h
index dad300fa14ce..d99f3a82e0e5 100644
--- a/arch/alpha/include/asm/core_marvel.h
+++ b/arch/alpha/include/asm/core_marvel.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Marvel systems use the IO7 I/O chip provides PCI/PCIX/AGP access
  *
@@ -312,7 +313,7 @@ struct io7 {
 	io7_port7_csrs *csrs;
 	struct io7_port ports[IO7_NUM_PORTS];
 
-	spinlock_t irq_lock;
+	raw_spinlock_t irq_lock;
 };
 
 #ifndef __EXTERN_INLINE
@@ -331,10 +332,10 @@ struct io7 {
 #define vucp	volatile unsigned char __force *
 #define vusp	volatile unsigned short __force *
 
-extern unsigned int marvel_ioread8(void __iomem *);
+extern u8 marvel_ioread8(const void __iomem *);
 extern void marvel_iowrite8(u8 b, void __iomem *);
 
-__EXTERN_INLINE unsigned int marvel_ioread16(void __iomem *addr)
+__EXTERN_INLINE u16 marvel_ioread16(const void __iomem *addr)
 {
 	return __kernel_ldwu(*(vusp)addr);
 }
diff --git a/arch/alpha/include/asm/core_mcpcia.h b/arch/alpha/include/asm/core_mcpcia.h
index ad44bef29fba..ed2bf8ad40ed 100644
--- a/arch/alpha/include/asm/core_mcpcia.h
+++ b/arch/alpha/include/asm/core_mcpcia.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_MCPCIA__H__
 #define __ALPHA_MCPCIA__H__
 
@@ -247,6 +248,7 @@ struct el_MCPCIA_uncorrected_frame_mcheck {
 
 #define vip	volatile int __force *
 #define vuip	volatile unsigned int __force *
+#define vulp	volatile unsigned long __force *
 
 #ifndef MCPCIA_ONE_HAE_WINDOW
 #define MCPCIA_FROB_MMIO						\
@@ -266,7 +268,7 @@ extern inline int __mcpcia_is_mmio(unsigned long addr)
 	return (addr & 0x80000000UL) == 0;
 }
 
-__EXTERN_INLINE unsigned int mcpcia_ioread8(void __iomem *xaddr)
+__EXTERN_INLINE u8 mcpcia_ioread8(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
 	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
@@ -290,7 +292,7 @@ __EXTERN_INLINE void mcpcia_iowrite8(u8 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + hose + 0x00) = w;
 }
 
-__EXTERN_INLINE unsigned int mcpcia_ioread16(void __iomem *xaddr)
+__EXTERN_INLINE u16 mcpcia_ioread16(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
 	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
@@ -314,7 +316,7 @@ __EXTERN_INLINE void mcpcia_iowrite16(u16 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + hose + 0x08) = w;
 }
 
-__EXTERN_INLINE unsigned int mcpcia_ioread32(void __iomem *xaddr)
+__EXTERN_INLINE u32 mcpcia_ioread32(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long)xaddr;
 
@@ -334,6 +336,26 @@ __EXTERN_INLINE void mcpcia_iowrite32(u32 b, void __iomem *xaddr)
 	*(vuip)addr = b;
 }
 
+__EXTERN_INLINE u64 mcpcia_ioread64(const void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr;
+
+	if (!__mcpcia_is_mmio(addr))
+		addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
+
+	return *(vulp)addr;
+}
+
+__EXTERN_INLINE void mcpcia_iowrite64(u64 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr;
+
+	if (!__mcpcia_is_mmio(addr))
+		addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
+
+	*(vulp)addr = b;
+}
+
 
 __EXTERN_INLINE void __iomem *mcpcia_ioportmap(unsigned long addr)
 {
@@ -361,6 +383,7 @@ __EXTERN_INLINE int mcpcia_is_mmio(const volatile void __iomem *xaddr)
 
 #undef vip
 #undef vuip
+#undef vulp
 
 #undef __IO_PREFIX
 #define __IO_PREFIX		mcpcia
diff --git a/arch/alpha/include/asm/core_polaris.h b/arch/alpha/include/asm/core_polaris.h
index 2f966b64659d..1c56dea647b5 100644
--- a/arch/alpha/include/asm/core_polaris.h
+++ b/arch/alpha/include/asm/core_polaris.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_POLARIS__H__
 #define __ALPHA_POLARIS__H__
 
diff --git a/arch/alpha/include/asm/core_t2.h b/arch/alpha/include/asm/core_t2.h
index ade9d92e68b4..ca9b091d9c5f 100644
--- a/arch/alpha/include/asm/core_t2.h
+++ b/arch/alpha/include/asm/core_t2.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_T2__H__
 #define __ALPHA_T2__H__
 
@@ -24,16 +25,8 @@
 #define T2_MEM_R1_MASK 0x07ffffff  /* Mem sparse region 1 mask is 27 bits */
 
 /* GAMMA-SABLE is a SABLE with EV5-based CPUs */
-/* All LYNX machines, EV4 or EV5, use the GAMMA bias also */
 #define _GAMMA_BIAS		0x8000000000UL
-
-#if defined(CONFIG_ALPHA_GENERIC)
-#define GAMMA_BIAS		alpha_mv.sys.t2.gamma_bias
-#elif defined(CONFIG_ALPHA_GAMMA)
 #define GAMMA_BIAS		_GAMMA_BIAS
-#else
-#define GAMMA_BIAS		0
-#endif
 
 /*
  * Memory spaces:
@@ -359,6 +352,7 @@ struct el_t2_frame_corrected {
 
 #define vip	volatile int *
 #define vuip	volatile unsigned int *
+#define vulp	volatile unsigned long *
 
 extern inline u8 t2_inb(unsigned long addr)
 {
@@ -401,6 +395,17 @@ extern inline void t2_outl(u32 b, unsigned long addr)
 	mb();
 }
 
+extern inline u64 t2_inq(unsigned long addr)
+{
+	return *(vulp) ((addr << 5) + T2_IO + 0x18);
+}
+
+extern inline void t2_outq(u64 b, unsigned long addr)
+{
+	*(vulp) ((addr << 5) + T2_IO + 0x18) = b;
+	mb();
+}
+
 
 /*
  * Memory functions.
@@ -571,7 +576,7 @@ __EXTERN_INLINE int t2_is_mmio(const volatile void __iomem *addr)
    it doesn't make sense to merge the pio and mmio routines.  */
 
 #define IOPORT(OS, NS)							\
-__EXTERN_INLINE unsigned int t2_ioread##NS(void __iomem *xaddr)		\
+__EXTERN_INLINE u##NS t2_ioread##NS(const void __iomem *xaddr)		\
 {									\
 	if (t2_is_mmio(xaddr))						\
 		return t2_read##OS(xaddr);				\
@@ -589,11 +594,13 @@ __EXTERN_INLINE void t2_iowrite##NS(u##NS b, void __iomem *xaddr)	\
 IOPORT(b, 8)
 IOPORT(w, 16)
 IOPORT(l, 32)
+IOPORT(q, 64)
 
 #undef IOPORT
 
 #undef vip
 #undef vuip
+#undef vulp
 
 #undef __IO_PREFIX
 #define __IO_PREFIX		t2
diff --git a/arch/alpha/include/asm/core_titan.h b/arch/alpha/include/asm/core_titan.h
index 8cf79d1219e1..dcc02682c1e1 100644
--- a/arch/alpha/include/asm/core_titan.h
+++ b/arch/alpha/include/asm/core_titan.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_TITAN__H__
 #define __ALPHA_TITAN__H__
 
diff --git a/arch/alpha/include/asm/core_tsunami.h b/arch/alpha/include/asm/core_tsunami.h
index 8e39ecf09419..3391e95754f2 100644
--- a/arch/alpha/include/asm/core_tsunami.h
+++ b/arch/alpha/include/asm/core_tsunami.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_TSUNAMI__H__
 #define __ALPHA_TSUNAMI__H__
 
diff --git a/arch/alpha/include/asm/core_wildfire.h b/arch/alpha/include/asm/core_wildfire.h
index cd562f544ba2..5d1b37f412cd 100644
--- a/arch/alpha/include/asm/core_wildfire.h
+++ b/arch/alpha/include/asm/core_wildfire.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_WILDFIRE__H__
 #define __ALPHA_WILDFIRE__H__
 
diff --git a/arch/alpha/include/asm/current.h b/arch/alpha/include/asm/current.h
deleted file mode 100644
index 094d285a1b34..000000000000
--- a/arch/alpha/include/asm/current.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _ALPHA_CURRENT_H
-#define _ALPHA_CURRENT_H
-
-#include <linux/thread_info.h>
-
-#define get_current()	(current_thread_info()->task)
-#define current		get_current()
-
-#endif /* _ALPHA_CURRENT_H */
diff --git a/arch/alpha/include/asm/delay.h b/arch/alpha/include/asm/delay.h
index 2aa3f410f7e6..868aa61aba2f 100644
--- a/arch/alpha/include/asm/delay.h
+++ b/arch/alpha/include/asm/delay.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_DELAY_H
 #define __ALPHA_DELAY_H
 
diff --git a/arch/alpha/include/asm/device.h b/arch/alpha/include/asm/device.h
index d8f9872b0e2d..9ca75a7db23e 100644
--- a/arch/alpha/include/asm/device.h
+++ b/arch/alpha/include/asm/device.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
  */
 #include <asm-generic/device.h>
 
diff --git a/arch/alpha/include/asm/div64.h b/arch/alpha/include/asm/div64.h
deleted file mode 100644
index 6cd978cefb28..000000000000
--- a/arch/alpha/include/asm/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h
index dfa32f061320..ad5a59b035cb 100644
--- a/arch/alpha/include/asm/dma-mapping.h
+++ b/arch/alpha/include/asm/dma-mapping.h
@@ -1,53 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_DMA_MAPPING_H
 #define _ALPHA_DMA_MAPPING_H
 
-#include <linux/dma-attrs.h>
+extern const struct dma_map_ops alpha_pci_ops;
 
-extern struct dma_map_ops *dma_ops;
-
-static inline struct dma_map_ops *get_dma_ops(struct device *dev)
-{
-	return dma_ops;
-}
-
-#include <asm-generic/dma-mapping-common.h>
-
-#define dma_alloc_coherent(d,s,h,f)	dma_alloc_attrs(d,s,h,f,NULL)
-
-static inline void *dma_alloc_attrs(struct device *dev, size_t size,
-				    dma_addr_t *dma_handle, gfp_t gfp,
-				    struct dma_attrs *attrs)
+static inline const struct dma_map_ops *get_arch_dma_ops(void)
 {
-	return get_dma_ops(dev)->alloc(dev, size, dma_handle, gfp, attrs);
+	return &alpha_pci_ops;
 }
 
-#define dma_free_coherent(d,s,c,h) dma_free_attrs(d,s,c,h,NULL)
-
-static inline void dma_free_attrs(struct device *dev, size_t size,
-				  void *vaddr, dma_addr_t dma_handle,
-				  struct dma_attrs *attrs)
-{
-	get_dma_ops(dev)->free(dev, size, vaddr, dma_handle, attrs);
-}
-
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return get_dma_ops(dev)->mapping_error(dev, dma_addr);
-}
-
-static inline int dma_supported(struct device *dev, u64 mask)
-{
-	return get_dma_ops(dev)->dma_supported(dev, mask);
-}
-
-static inline int dma_set_mask(struct device *dev, u64 mask)
-{
-	return get_dma_ops(dev)->set_dma_mask(dev, mask);
-}
-
-#define dma_alloc_noncoherent(d, s, h, f)	dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h)	dma_free_coherent(d, s, v, h)
-
-#define dma_cache_sync(dev, va, size, dir)		  ((void)0)
-
 #endif	/* _ALPHA_DMA_MAPPING_H */
diff --git a/arch/alpha/include/asm/dma.h b/arch/alpha/include/asm/dma.h
index 87cfdbdf08fc..3a88812b7165 100644
--- a/arch/alpha/include/asm/dma.h
+++ b/arch/alpha/include/asm/dma.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * include/asm-alpha/dma.h
  *
@@ -81,11 +82,6 @@
   just a wiring limit.
 */
 
-/* The maximum address for ISA DMA transfer on Alpha XL, due to an
-   hardware SIO limitation, is 64MB.
-*/
-#define ALPHA_XL_MAX_ISA_DMA_ADDRESS		0x04000000UL
-
 /* The maximum address for ISA DMA transfer on RUFFIAN,
    due to an hardware SIO limitation, is 16MB.
 */
@@ -106,9 +102,7 @@
 #ifdef CONFIG_ALPHA_GENERIC
 # define MAX_ISA_DMA_ADDRESS		(alpha_mv.max_isa_dma_address)
 #else
-# if defined(CONFIG_ALPHA_XL)
-#  define MAX_ISA_DMA_ADDRESS		ALPHA_XL_MAX_ISA_DMA_ADDRESS
-# elif defined(CONFIG_ALPHA_RUFFIAN)
+# if defined(CONFIG_ALPHA_RUFFIAN)
 #  define MAX_ISA_DMA_ADDRESS		ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS
 # elif defined(CONFIG_ALPHA_SABLE)
 #  define MAX_ISA_DMA_ADDRESS		ALPHA_SABLE_MAX_ISA_DMA_ADDRESS
@@ -364,13 +358,4 @@ extern void free_dma(unsigned int dmanr);	/* release it again */
 #define KERNEL_HAVE_CHECK_DMA
 extern int check_dma(unsigned int dmanr);
 
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy 	(0)
-#endif
-
-
 #endif /* _ASM_DMA_H */
diff --git a/arch/alpha/include/asm/elf.h b/arch/alpha/include/asm/elf.h
index 968d9991f5ee..50c82187e60e 100644
--- a/arch/alpha/include/asm/elf.h
+++ b/arch/alpha/include/asm/elf.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ASM_ALPHA_ELF_H
 #define __ASM_ALPHA_ELF_H
 
@@ -73,7 +74,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 /*
  * This is used to ensure we don't load something for the wrong architecture.
  */
-#define elf_check_arch(x) ((x)->e_machine == EM_ALPHA)
+#define elf_check_arch(x) (((x)->e_machine == EM_ALPHA) && !((x)->e_flags & EF_ALPHA_32BIT))
 
 /*
  * These are used to set parameters in the core dumps.
@@ -119,12 +120,6 @@ extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task);
 #define ELF_CORE_COPY_TASK_REGS(TASK, DEST) \
 	dump_elf_task(*(DEST), TASK)
 
-/* Similar, but for the FP registers.  */
-
-extern int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task);
-#define ELF_CORE_COPY_FPREGS(TASK, DEST) \
-	dump_elf_task_fp(*(DEST), TASK)
-
 /* This yields a mask that user programs can use to figure out what
    instruction set this CPU supports.  This is trivial on Alpha, 
    but not so on other machines. */
@@ -138,16 +133,10 @@ extern int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task);
 #define ELF_PLATFORM				\
 ({						\
 	enum implver_enum i_ = implver();	\
-	( i_ == IMPLVER_EV4 ? "ev4"		\
-	: i_ == IMPLVER_EV5			\
-	  ? (amask(AMASK_BWX) ? "ev5" : "ev56")	\
+	( i_ == IMPLVER_EV5 ? "ev56"			\
 	: amask (AMASK_CIX) ? "ev6" : "ev67");	\
 })
 
-#define SET_PERSONALITY(EX)					\
-	set_personality(((EX).e_flags & EF_ALPHA_32BIT)		\
-	   ? PER_LINUX_32BIT : PER_LINUX)
-
 extern int alpha_l1i_cacheshape;
 extern int alpha_l1d_cacheshape;
 extern int alpha_l2_cacheshape;
diff --git a/arch/alpha/include/asm/err_common.h b/arch/alpha/include/asm/err_common.h
index c25095942107..610e01fe73ab 100644
--- a/arch/alpha/include/asm/err_common.h
+++ b/arch/alpha/include/asm/err_common.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  *	linux/include/asm-alpha/err_common.h
  *
diff --git a/arch/alpha/include/asm/err_ev7.h b/arch/alpha/include/asm/err_ev7.h
index 87f99777c2e4..ab17e6333764 100644
--- a/arch/alpha/include/asm/err_ev7.h
+++ b/arch/alpha/include/asm/err_ev7.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_ERR_EV7_H
 #define __ALPHA_ERR_EV7_H 1
 
diff --git a/arch/alpha/include/asm/extable.h b/arch/alpha/include/asm/extable.h
new file mode 100644
index 000000000000..e42592390ee0
--- /dev/null
+++ b/arch/alpha/include/asm/extable.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_EXTABLE_H
+#define _ASM_EXTABLE_H
+
+/*
+ * About the exception table:
+ *
+ * - insn is a 32-bit pc-relative offset from the faulting insn.
+ * - nextinsn is a 16-bit offset off of the faulting instruction
+ *   (not off of the *next* instruction as branches are).
+ * - errreg is the register in which to place -EFAULT.
+ * - valreg is the final target register for the load sequence
+ *   and will be zeroed.
+ *
+ * Either errreg or valreg may be $31, in which case nothing happens.
+ *
+ * The exception fixup information "just so happens" to be arranged
+ * as in a MEM format instruction.  This lets us emit our three
+ * values like so:
+ *
+ *      lda valreg, nextinsn(errreg)
+ *
+ */
+
+struct exception_table_entry
+{
+	signed int insn;
+	union exception_fixup {
+		unsigned unit;
+		struct {
+			signed int nextinsn : 16;
+			unsigned int errreg : 5;
+			unsigned int valreg : 5;
+		} bits;
+	} fixup;
+};
+
+/* Returns the new pc */
+#define fixup_exception(map_reg, _fixup, pc)			\
+({								\
+	if ((_fixup)->fixup.bits.valreg != 31)			\
+		map_reg((_fixup)->fixup.bits.valreg) = 0;	\
+	if ((_fixup)->fixup.bits.errreg != 31)			\
+		map_reg((_fixup)->fixup.bits.errreg) = -EFAULT;	\
+	(pc) + (_fixup)->fixup.bits.nextinsn;			\
+})
+
+#define ARCH_HAS_RELATIVE_EXTABLE
+
+#define swap_ex_entry_fixup(a, b, tmp, delta)			\
+	do {							\
+		(a)->fixup.unit = (b)->fixup.unit;		\
+		(b)->fixup.unit = (tmp).fixup.unit;		\
+	} while (0)
+
+#endif
diff --git a/arch/alpha/include/asm/fb.h b/arch/alpha/include/asm/fb.h
deleted file mode 100644
index fa9bbb96b2b3..000000000000
--- a/arch/alpha/include/asm/fb.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-#include <linux/device.h>
-
-/* Caching is off in the I/O space quadrant by design.  */
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/arch/alpha/include/asm/floppy.h b/arch/alpha/include/asm/floppy.h
index bae97eb19d26..5a6239e65097 100644
--- a/arch/alpha/include/asm/floppy.h
+++ b/arch/alpha/include/asm/floppy.h
@@ -11,8 +11,8 @@
 #define __ASM_ALPHA_FLOPPY_H
 
 
-#define fd_inb(port)			inb_p(port)
-#define fd_outb(value,port)		outb_p(value,port)
+#define fd_inb(base, reg)		inb_p((base) + (reg))
+#define fd_outb(value, base, reg)	outb_p(value, (base) + (reg))
 
 #define fd_enable_dma()         enable_dma(FLOPPY_DMA)
 #define fd_disable_dma()        disable_dma(FLOPPY_DMA)
@@ -20,11 +20,10 @@
 #define fd_free_dma()           free_dma(FLOPPY_DMA)
 #define fd_clear_dma_ff()       clear_dma_ff(FLOPPY_DMA)
 #define fd_set_dma_mode(mode)   set_dma_mode(FLOPPY_DMA,mode)
-#define fd_set_dma_addr(addr)   set_dma_addr(FLOPPY_DMA,virt_to_bus(addr))
+#define fd_set_dma_addr(addr)   set_dma_addr(FLOPPY_DMA,isa_virt_to_bus(addr))
 #define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA,count)
 #define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
 #define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
-#define fd_cacheflush(addr,size) /* nothing */
 #define fd_request_irq()        request_irq(FLOPPY_IRQ, floppy_interrupt,\
 					    0, "floppy", NULL)
 #define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL)
@@ -44,17 +43,18 @@ alpha_fd_dma_setup(char *addr, unsigned long size, int mode, int io)
 	static int prev_dir;
 	int dir;
 
-	dir = (mode != DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;
+	dir = (mode != DMA_MODE_READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
 
 	if (bus_addr 
 	    && (addr != prev_addr || size != prev_size || dir != prev_dir)) {
 		/* different from last time -- unmap prev */
-		pci_unmap_single(isa_bridge, bus_addr, prev_size, prev_dir);
+		dma_unmap_single(&isa_bridge->dev, bus_addr, prev_size,
+				 prev_dir);
 		bus_addr = 0;
 	}
 
 	if (!bus_addr)	/* need to map it */
-		bus_addr = pci_map_single(isa_bridge, addr, size, dir);
+		bus_addr = dma_map_single(&isa_bridge->dev, addr, size, dir);
 
 	/* remember this one as prev */
 	prev_addr = addr;
@@ -62,7 +62,6 @@ alpha_fd_dma_setup(char *addr, unsigned long size, int mode, int io)
 	prev_dir = dir;
 
 	fd_clear_dma_ff();
-	fd_cacheflush(addr, size);
 	fd_set_dma_mode(mode);
 	set_dma_addr(FLOPPY_DMA, bus_addr);
 	fd_set_dma_count(size);
@@ -91,25 +90,6 @@ static int FDC2 = -1;
 #define N_FDC 2
 #define N_DRIVE 8
 
-/*
- * Most Alphas have no problems with floppy DMA crossing 64k borders,
- * except for certain ones, like XL and RUFFIAN.
- *
- * However, the test is simple and fast, and this *is* floppy, after all,
- * so we do it for all platforms, just to make sure.
- *
- * This is advantageous in other circumstances as well, as in moving
- * about the PCI DMA windows and forcing the floppy to start doing
- * scatter-gather when it never had before, and there *is* a problem
- * on that platform... ;-}
- */
-
-static inline unsigned long CROSS_64KB(void *a, unsigned long s)
-{
-	unsigned long p = (unsigned long)a;
-	return ((p + s - 1) ^ p) & ~0xffffUL;
-}
-
 #define EXTRA_FLOPPY_PARAMS
 
 #endif /* __ASM_ALPHA_FLOPPY_H */
diff --git a/arch/alpha/include/asm/fpu.h b/arch/alpha/include/asm/fpu.h
index 71c20956b905..30b24135dd7a 100644
--- a/arch/alpha/include/asm/fpu.h
+++ b/arch/alpha/include/asm/fpu.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ASM_ALPHA_FPU_H
 #define __ASM_ALPHA_FPU_H
 
@@ -14,21 +15,27 @@ rdfpcr(void)
 {
 	unsigned long tmp, ret;
 
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		ret = current_thread_info()->fp[31];
+	} else {
 #if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
-	__asm__ __volatile__ (
-		"ftoit $f0,%0\n\t"
-		"mf_fpcr $f0\n\t"
-		"ftoit $f0,%1\n\t"
-		"itoft %0,$f0"
-		: "=r"(tmp), "=r"(ret));
+		__asm__ __volatile__ (
+			"ftoit $f0,%0\n\t"
+			"mf_fpcr $f0\n\t"
+			"ftoit $f0,%1\n\t"
+			"itoft %0,$f0"
+			: "=r"(tmp), "=r"(ret));
 #else
-	__asm__ __volatile__ (
-		"stt $f0,%0\n\t"
-		"mf_fpcr $f0\n\t"
-		"stt $f0,%1\n\t"
-		"ldt $f0,%0"
-		: "=m"(tmp), "=m"(ret));
+		__asm__ __volatile__ (
+			"stt $f0,%0\n\t"
+			"mf_fpcr $f0\n\t"
+			"stt $f0,%1\n\t"
+			"ldt $f0,%0"
+			: "=m"(tmp), "=m"(ret));
 #endif
+	}
+	preempt_enable();
 
 	return ret;
 }
@@ -38,21 +45,28 @@ wrfpcr(unsigned long val)
 {
 	unsigned long tmp;
 
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		current_thread_info()->status |= TS_RESTORE_FP;
+		current_thread_info()->fp[31] = val;
+	} else {
 #if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
-	__asm__ __volatile__ (
-		"ftoit $f0,%0\n\t"
-		"itoft %1,$f0\n\t"
-		"mt_fpcr $f0\n\t"
-		"itoft %0,$f0"
-		: "=&r"(tmp) : "r"(val));
+		__asm__ __volatile__ (
+			"ftoit $f0,%0\n\t"
+			"itoft %1,$f0\n\t"
+			"mt_fpcr $f0\n\t"
+			"itoft %0,$f0"
+			: "=&r"(tmp) : "r"(val));
 #else
-	__asm__ __volatile__ (
-		"stt $f0,%0\n\t"
-		"ldt $f0,%1\n\t"
-		"mt_fpcr $f0\n\t"
-		"ldt $f0,%0"
-		: "=m"(tmp) : "m"(val));
+		__asm__ __volatile__ (
+			"stt $f0,%0\n\t"
+			"ldt $f0,%1\n\t"
+			"mt_fpcr $f0\n\t"
+			"ldt $f0,%0"
+			: "=m"(tmp) : "m"(val));
 #endif
+	}
+	preempt_enable();
 }
 
 static inline unsigned long