diff options
Diffstat (limited to 'tools/testing/selftests/net')
| -rw-r--r-- | tools/testing/selftests/net/.gitignore | 1 | ||||
| -rw-r--r-- | tools/testing/selftests/net/Makefile | 3 | ||||
| -rwxr-xr-x | tools/testing/selftests/net/fib_rule_tests.sh | 34 | ||||
| -rwxr-xr-x | tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh | 96 | ||||
| -rwxr-xr-x | tools/testing/selftests/net/forwarding/tc_taprio.sh | 421 | ||||
| -rw-r--r-- | tools/testing/selftests/net/forwarding/tsn_lib.sh | 26 | ||||
| -rwxr-xr-x | tools/testing/selftests/net/gre_ipv6_lladdr.sh | 177 | ||||
| -rwxr-xr-x | tools/testing/selftests/net/mptcp/diag.sh | 5 | ||||
| -rwxr-xr-x | tools/testing/selftests/net/mptcp/mptcp_join.sh | 18 | ||||
| -rwxr-xr-x | tools/testing/selftests/net/netfilter/nft_concat_range.sh | 39 | ||||
| -rw-r--r-- | tools/testing/selftests/net/skf_net_off.c | 244 | ||||
| -rwxr-xr-x | tools/testing/selftests/net/skf_net_off.sh | 30 | ||||
| -rw-r--r-- | tools/testing/selftests/net/tls.c | 36 |
13 files changed, 1125 insertions, 5 deletions
diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore index 679542f565a4..532bb732bc6d 100644 --- a/tools/testing/selftests/net/.gitignore +++ b/tools/testing/selftests/net/.gitignore @@ -39,6 +39,7 @@ scm_rights sk_bind_sendto_listen sk_connect_zero_addr sk_so_peek_off +skf_net_off socket so_incoming_cpu so_netns_cookie diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 6d718b478ed8..70a38f485d4d 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -31,6 +31,7 @@ TEST_PROGS += veth.sh TEST_PROGS += ioam6.sh TEST_PROGS += gro.sh TEST_PROGS += gre_gso.sh +TEST_PROGS += gre_ipv6_lladdr.sh TEST_PROGS += cmsg_so_mark.sh TEST_PROGS += cmsg_so_priority.sh TEST_PROGS += test_so_rcv.sh @@ -106,6 +107,8 @@ TEST_PROGS += ipv6_route_update_soft_lockup.sh TEST_PROGS += busy_poll_test.sh TEST_GEN_PROGS += proc_net_pktgen TEST_PROGS += lwt_dst_cache_ref_loop.sh +TEST_PROGS += skf_net_off.sh +TEST_GEN_FILES += skf_net_off # YNL files, must be before "include ..lib.mk" YNL_GEN_FILES := busy_poller netlink-dumps diff --git a/tools/testing/selftests/net/fib_rule_tests.sh b/tools/testing/selftests/net/fib_rule_tests.sh index b866bab1d92a..c7cea556b416 100755 --- a/tools/testing/selftests/net/fib_rule_tests.sh +++ b/tools/testing/selftests/net/fib_rule_tests.sh @@ -359,6 +359,23 @@ fib_rule6_test() "$getnomatch" "iif flowlabel masked redirect to table" \ "iif flowlabel masked no redirect to table" fi + + $IP link show dev $DEV | grep -q vrf0 + if [ $? -eq 0 ]; then + match="oif vrf0" + getmatch="oif $DEV" + getnomatch="oif lo" + fib_rule6_test_match_n_redirect "$match" "$getmatch" \ + "$getnomatch" "VRF oif redirect to table" \ + "VRF oif no redirect to table" + + match="from $SRC_IP6 iif vrf0" + getmatch="from $SRC_IP6 iif $DEV" + getnomatch="from $SRC_IP6 iif lo" + fib_rule6_test_match_n_redirect "$match" "$getmatch" \ + "$getnomatch" "VRF iif redirect to table" \ + "VRF iif no redirect to table" + fi } fib_rule6_vrf_test() @@ -635,6 +652,23 @@ fib_rule4_test() "$getnomatch" "iif dscp masked redirect to table" \ "iif dscp masked no redirect to table" fi + + $IP link show dev $DEV | grep -q vrf0 + if [ $? -eq 0 ]; then + match="oif vrf0" + getmatch="oif $DEV" + getnomatch="oif lo" + fib_rule4_test_match_n_redirect "$match" "$getmatch" \ + "$getnomatch" "VRF oif redirect to table" \ + "VRF oif no redirect to table" + + match="from $SRC_IP iif vrf0" + getmatch="from $SRC_IP iif $DEV" + getnomatch="from $SRC_IP iif lo" + fib_rule4_test_match_n_redirect "$match" "$getmatch" \ + "$getnomatch" "VRF iif redirect to table" \ + "VRF iif no redirect to table" + fi } fib_rule4_vrf_test() diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh index 90f8a244ea90..e59fba366a0a 100755 --- a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh +++ b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh @@ -1,7 +1,7 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding vlan_deletion extern_learn other_tpid" +ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding vlan_deletion extern_learn other_tpid 8021p drop_untagged" NUM_NETIFS=4 CHECK_TC="yes" source lib.sh @@ -194,6 +194,100 @@ other_tpid() tc qdisc del dev $h2 clsact } +8021p_do() +{ + local should_fail=$1; shift + local mac=de:ad:be:ef:13:37 + + tc filter add dev $h2 ingress protocol all pref 1 handle 101 \ + flower dst_mac $mac action drop + + $MZ -q $h1 -c 1 -b $mac -a own "81:00 00:00 08:00 aa-aa-aa-aa-aa-aa-aa-aa-aa" + sleep 1 + + tc -j -s filter show dev $h2 ingress \ + | jq -e ".[] | select(.options.handle == 101) \ + | select(.options.actions[0].stats.packets == 1)" &> /dev/null + check_err_fail $should_fail $? "802.1p-tagged reception" + + tc filter del dev $h2 ingress pref 1 +} + +8021p() +{ + RET=0 + + tc qdisc add dev $h2 clsact + ip link set $h2 promisc on + + # Test that with the default_pvid, 1, packets tagged with VID 0 are + # accepted. + 8021p_do 0 + + # Test that packets tagged with VID 0 are still accepted after changing + # the default_pvid. + ip link set br0 type bridge vlan_default_pvid 10 + 8021p_do 0 + + log_test "Reception of 802.1p-tagged traffic" + + ip link set $h2 promisc off + tc qdisc del dev $h2 clsact +} + +send_untagged_and_8021p() +{ + ping_do $h1 192.0.2.2 + check_fail $? + + 8021p_do 1 +} + +drop_untagged() +{ + RET=0 + + tc qdisc add dev $h2 clsact + ip link set $h2 promisc on + + # Test that with no PVID, untagged and 802.1p-tagged traffic is + # dropped. + ip link set br0 type bridge vlan_default_pvid 1 + + # First we reconfigure the default_pvid, 1, as a non-PVID VLAN. + bridge vlan add dev $swp1 vid 1 untagged + send_untagged_and_8021p + bridge vlan add dev $swp1 vid 1 pvid untagged + + # Next we try to delete VID 1 altogether + bridge vlan del dev $swp1 vid 1 + send_untagged_and_8021p + bridge vlan add dev $swp1 vid 1 pvid untagged + + # Set up the bridge without a default_pvid, then check that the 8021q + # module, when the bridge port goes down and then up again, does not + # accidentally re-enable untagged packet reception. + ip link set br0 type bridge vlan_default_pvid 0 + ip link set $swp1 down + ip link set $swp1 up + setup_wait + send_untagged_and_8021p + + # Remove swp1 as a bridge port and let it rejoin the bridge while it + # has no default_pvid. + ip link set $swp1 nomaster + ip link set $swp1 master br0 + send_untagged_and_8021p + + # Restore settings + ip link set br0 type bridge vlan_default_pvid 1 + + log_test "Dropping of untagged and 802.1p-tagged traffic with no PVID" + + ip link set $h2 promisc off + tc qdisc del dev $h2 clsact +} + trap cleanup EXIT setup_prepare diff --git a/tools/testing/selftests/net/forwarding/tc_taprio.sh b/tools/testing/selftests/net/forwarding/tc_taprio.sh new file mode 100755 index 000000000000..8992aeabfe0b --- /dev/null +++ b/tools/testing/selftests/net/forwarding/tc_taprio.sh @@ -0,0 +1,421 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" \ + test_clock_jump_backward \ + test_taprio_after_ptp \ + test_max_sdu \ + test_clock_jump_backward_forward \ +" +NUM_NETIFS=4 +source tc_common.sh +source lib.sh +source tsn_lib.sh + +require_command python3 + +# The test assumes the usual topology from the README, where h1 is connected to +# swp1, h2 to swp2, and swp1 and swp2 are together in a bridge. +# Additional assumption: h1 and h2 use the same PHC, and so do swp1 and swp2. +# By synchronizing h1 to swp1 via PTP, h2 is also implicitly synchronized to +# swp1 (and both to CLOCK_REALTIME). +h1=${NETIFS[p1]} +swp1=${NETIFS[p2]} +swp2=${NETIFS[p3]} +h2=${NETIFS[p4]} + +UDS_ADDRESS_H1="/var/run/ptp4l_h1" +UDS_ADDRESS_SWP1="/var/run/ptp4l_swp1" + +H1_IPV4="192.0.2.1" +H2_IPV4="192.0.2.2" +H1_IPV6="2001:db8:1::1" +H2_IPV6="2001:db8:1::2" + +# Tunables +NUM_PKTS=100 +STREAM_VID=10 +STREAM_PRIO_1=6 +STREAM_PRIO_2=5 +STREAM_PRIO_3=4 +# PTP uses TC 0 +ALL_GATES=$((1 << 0 | 1 << STREAM_PRIO_1 | 1 << STREAM_PRIO_2)) +# Use a conservative cycle of 10 ms to allow the test to still pass when the +# kernel has some extra overhead like lockdep etc +CYCLE_TIME_NS=10000000 +# Create two Gate Control List entries, one OPEN and one CLOSE, of equal +# durations +GATE_DURATION_NS=$((CYCLE_TIME_NS / 2)) +# Give 2/3 of the cycle time to user space and 1/3 to the kernel +FUDGE_FACTOR=$((CYCLE_TIME_NS / 3)) +# Shift the isochron base time by half the gate time, so that packets are +# always received by swp1 close to the middle of the time slot, to minimize +# inaccuracies due to network sync +SHIFT_TIME_NS=$((GATE_DURATION_NS / 2)) + +path_delay= + +h1_create() +{ + simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h1_destroy() +{ + simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h2_create() +{ + simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +h2_destroy() +{ + simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +switch_create() +{ + local h2_mac_addr=$(mac_get $h2) + + ip link set $swp1 up + ip link set $swp2 up + + ip link add br0 type bridge vlan_filtering 1 + ip link set $swp1 master br0 + ip link set $swp2 master br0 + ip link set br0 up + + bridge vlan add dev $swp2 vid $STREAM_VID + bridge vlan add dev $swp1 vid $STREAM_VID + bridge fdb add dev $swp2 \ + $h2_mac_addr vlan $STREAM_VID static master +} + +switch_destroy() +{ + ip link del br0 +} + +ptp_setup() +{ + # Set up swp1 as a master PHC for h1, synchronized to the local + # CLOCK_REALTIME. + phc2sys_start $UDS_ADDRESS_SWP1 + ptp4l_start $h1 true $UDS_ADDRESS_H1 + ptp4l_start $swp1 false $UDS_ADDRESS_SWP1 +} + +ptp_cleanup() +{ + ptp4l_stop $swp1 + ptp4l_stop $h1 + phc2sys_stop +} + +txtime_setup() +{ + local if_name=$1 + + tc qdisc add dev $if_name clsact + # Classify PTP on TC 7 and isochron on TC 6 + tc filter add dev $if_name egress protocol 0x88f7 \ + flower action skbedit priority 7 + tc filter add dev $if_name egress protocol 802.1Q \ + flower vlan_ethtype 0xdead action skbedit priority 6 + tc qdisc add dev $if_name handle 100: parent root mqprio num_tc 8 \ + queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ + map 0 1 2 3 4 5 6 7 \ + hw 1 + # Set up TC 5, 6, 7 for SO_TXTIME. tc-mqprio queues count from 1. + tc qdisc replace dev $if_name parent 100:$((STREAM_PRIO_1 + 1)) etf \ + clockid CLOCK_TAI offload delta $FUDGE_FACTOR + tc qdisc replace dev $if_name parent 100:$((STREAM_PRIO_2 + 1)) etf \ + clockid CLOCK_TAI offload delta $FUDGE_FACTOR + tc qdisc replace dev $if_name parent 100:$((STREAM_PRIO_3 + 1)) etf \ + clockid CLOCK_TAI offload delta $FUDGE_FACTOR +} + +txtime_cleanup() +{ + local if_name=$1 + + tc qdisc del dev $if_name clsact + tc qdisc del dev $if_name root +} + +taprio_replace() +{ + local if_name="$1"; shift + local extra_args="$1"; shift + + # STREAM_PRIO_1 always has an open gate. + # STREAM_PRIO_2 has a gate open for GATE_DURATION_NS (half the cycle time) + # STREAM_PRIO_3 always has a closed gate. + tc qdisc replace dev $if_name root stab overhead 24 taprio num_tc 8 \ + queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ + map 0 1 2 3 4 5 6 7 \ + sched-entry S $(printf "%x" $ALL_GATES) $GATE_DURATION_NS \ + sched-entry S $(printf "%x" $((ALL_GATES & ~(1 << STREAM_PRIO_2)))) $GATE_DURATION_NS \ + base-time 0 flags 0x2 $extra_args + taprio_wait_for_admin $if_name +} + +taprio_cleanup() +{ + local if_name=$1 + + tc qdisc del dev $if_name root +} + +probe_path_delay() +{ + local isochron_dat="$(mktemp)" + local received + + log_info "Probing path delay" + + isochron_do "$h1" "$h2" "$UDS_ADDRESS_H1" "" 0 \ + "$CYCLE_TIME_NS" "" "" "$NUM_PKTS" \ + "$STREAM_VID" "$STREAM_PRIO_1" "" "$isochron_dat" + + received=$(isochron_report_num_received "$isochron_dat") + if [ "$received" != "$NUM_PKTS" ]; then + echo "Cannot establish basic data path between $h1 and $h2" + exit $ksft_fail + fi + + printf "pdelay = {}\n" > isochron_data.py + isochron report --input-file "$isochron_dat" \ + --printf-format "pdelay[%u] = %d - %d\n" \ + --printf-args "qRT" \ + >> isochron_data.py + cat <<-'EOF' > isochron_postprocess.py + #!/usr/bin/env python3 + + from isochron_data import pdelay + import numpy as np + + w = np.array(list(pdelay.values())) + print("{}".format(np.max(w))) + EOF + path_delay=$(python3 ./isochron_postprocess.py) + + log_info "Path delay from $h1 to $h2 estimated at $path_delay ns" + + if [ "$path_delay" -gt "$GATE_DURATION_NS" ]; then + echo "Path delay larger than gate duration, aborting" + exit $ksft_fail + fi + + rm -f ./isochron_data.py 2> /dev/null + rm -f ./isochron_postprocess.py 2> /dev/null + rm -f "$isochron_dat" 2> /dev/null +} + +setup_prepare() +{ + vrf_prepare + + h1_create + h2_create + switch_create + + txtime_setup $h1 + + # Temporarily set up PTP just to probe the end-to-end path delay. + ptp_setup + probe_path_delay + ptp_cleanup +} + +cleanup() +{ + pre_cleanup + + isochron_recv_stop + txtime_cleanup $h1 + + switch_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +run_test() +{ + local base_time=$1; shift + local stream_prio=$1; shift + local expected_delay=$1; shift + local should_fail=$1; shift + local test_name=$1; shift + local isochron_dat="$(mktemp)" + local received + local median_delay + + RET=0 + + # Set the shift time equal to the cycle time, which effectively + # cancels the default advance time. Packets won't be sent early in + # software, which ensures that they won't prematurely enter through + # the open gate in __test_out_of_band(). Also, the gate is open for + # long enough that this won't cause a problem in __test_in_band(). + isochron_do "$h1" "$h2" "$UDS_ADDRESS_H1" "" "$base_time" \ + "$CYCLE_TIME_NS" "$SHIFT_TIME_NS" "$GATE_DURATION_NS" \ + "$NUM_PKTS" "$STREAM_VID" "$stream_prio" "" "$isochron_dat" + + received=$(isochron_report_num_received "$isochron_dat") + [ "$received" = "$NUM_PKTS" ] + check_err_fail $should_fail $? "Reception of $NUM_PKTS packets" + + if [ $should_fail = 0 ] && [ "$received" = "$NUM_PKTS" ]; then + printf "pdelay = {}\n" > isochron_data.py + isochron report --input-file "$isochron_dat" \ + --printf-format "pdelay[%u] = %d - %d\n" \ + --printf-args "qRT" \ + >> isochron_data.py + cat <<-'EOF' > isochron_postprocess.py + #!/usr/bin/env python3 + + from isochron_data import pdelay + import numpy as np + + w = np.array(list(pdelay.values())) + print("{}".format(int(np.median(w)))) + EOF + median_delay=$(python3 ./isochron_postprocess.py) + + # If the condition below is true, packets were delayed by a closed gate + [ "$median_delay" -gt $((path_delay + expected_delay)) ] + check_fail $? "Median delay $median_delay is greater than expected delay $expected_delay plus path delay $path_delay" + + # If the condition below is true, packets were sent expecting them to + # hit a closed gate in the switch, but were not delayed + [ "$expected_delay" -gt 0 ] && [ "$median_delay" -lt "$expected_delay" ] + check_fail $? "Median delay $median_delay is less than expected delay $expected_delay" + fi + + log_test "$test_name" + + rm -f ./isochron_data.py 2> /dev/null + rm -f ./isochron_postprocess.py 2> /dev/null + rm -f "$isochron_dat" 2> /dev/null +} + +__test_always_open() +{ + run_test 0.000000000 $STREAM_PRIO_1 0 0 "Gate always open" +} + +__test_always_closed() +{ + run_test 0.000000000 $STREAM_PRIO_3 0 1 "Gate always closed" +} + +__test_in_band() +{ + # Send packets in-band with the OPEN gate entry + run_test 0.000000000 $STREAM_PRIO_2 0 0 "In band with gate" +} + +__test_out_of_band() +{ + # Send packets in-band with the CLOSE gate entry + run_test 0.005000000 $STREAM_PRIO_2 \ + $((GATE_DURATION_NS - SHIFT_TIME_NS)) 0 \ + "Out of band with gate" +} + +run_subtests() +{ + __test_always_open + __test_always_closed + __test_in_band + __test_out_of_band +} + +test_taprio_after_ptp() +{ + log_info "Setting up taprio after PTP" + ptp_setup + taprio_replace $swp2 + run_subtests + taprio_cleanup $swp2 + ptp_cleanup +} + +__test_under_max_sdu() +{ + # Limit max-sdu for STREAM_PRIO_1 + taprio_replace "$swp2" "max-sdu 0 0 0 0 0 0 100 0" + run_test 0.000000000 $STREAM_PRIO_1 0 0 "Under maximum SDU" +} + +__test_over_max_sdu() +{ + # Limit max-sdu for STREAM_PRIO_1 + taprio_replace "$swp2" "max-sdu 0 0 0 0 0 0 20 0" + run_test 0.000000000 $STREAM_PRIO_1 0 1 "Over maximum SDU" +} + +test_max_sdu() +{ + ptp_setup + __test_under_max_sdu + __test_over_max_sdu + taprio_cleanup $swp2 + ptp_cleanup +} + +# Perform a clock jump in the past without synchronization running, so that the +# time base remains where it was set by phc_ctl. +test_clock_jump_backward() +{ + # This is a more complex schedule specifically crafted in a way that + # has been problematic on NXP LS1028A. Not much to test with it other + # than the fact that it passes traffic. + tc qdisc replace dev $swp2 root stab overhead 24 taprio num_tc 8 \ + queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 map 0 1 2 3 4 5 6 7 \ + base-time 0 sched-entry S 20 300000 sched-entry S 10 200000 \ + sched-entry S 20 300000 sched-entry S 48 200000 \ + sched-entry S 20 300000 sched-entry S 83 200000 \ + sched-entry S 40 300000 sched-entry S 00 200000 flags 2 + + log_info "Forcing a backward clock jump" + phc_ctl $swp1 set 0 + + ping_test $h1 192.0.2.2 + taprio_cleanup $swp2 +} + +# Test that taprio tolerates clock jumps. +# Since ptp4l and phc2sys are running, it is expected for the time to +# eventually recover (through yet another clock jump). Isochron waits +# until that is the case. +test_clock_jump_backward_forward() +{ + log_info "Forcing a backward and a forward clock jump" + taprio_replace $swp2 + phc_ctl $swp1 set 0 + ptp_setup + ping_test $h1 192.0.2.2 + run_subtests + ptp_cleanup + taprio_cleanup $swp2 +} + +tc_offload_check +if [[ $? -ne 0 ]]; then + log_test_skip "Could not test offloaded functionality" + exit $EXIT_STATUS +fi + +trap cleanup EXIT + +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/tsn_lib.sh b/tools/testing/selftests/net/forwarding/tsn_lib.sh index b91bcd8008a9..08c044ff6689 100644 --- a/tools/testing/selftests/net/forwarding/tsn_lib.sh +++ b/tools/testing/selftests/net/forwarding/tsn_lib.sh @@ -2,6 +2,8 @@ # SPDX-License-Identifier: GPL-2.0 # Copyright 2021-2022 NXP +tc_testing_scripts_dir=$(dirname $0)/../../tc-testing/scripts + REQUIRE_ISOCHRON=${REQUIRE_ISOCHRON:=yes} REQUIRE_LINUXPTP=${REQUIRE_LINUXPTP:=yes} @@ -18,6 +20,7 @@ fi if [[ "$REQUIRE_LINUXPTP" = "yes" ]]; then require_command phc2sys require_command ptp4l + require_command phc_ctl fi phc2sys_start() @@ -182,6 +185,7 @@ isochron_do() local base_time=$1; shift local cycle_time=$1; shift local shift_time=$1; shift + local window_size=$1; shift local num_pkts=$1; shift local vid=$1; shift local priority=$1; shift @@ -212,6 +216,10 @@ isochron_do() extra_args="${extra_args} --shift-time=${shift_time}" fi + if ! [ -z "${window_size}" ]; then + extra_args="${extra_args} --window-size=${window_size}" + fi + if [ "${use_l2}" = "true" ]; then extra_args="${extra_args} --l2 --etype=0xdead ${vid}" receiver_extra_args="--l2 --etype=0xdead" @@ -247,3 +255,21 @@ isochron_do() cpufreq_restore ${ISOCHRON_CPU} } + +isochron_report_num_received() +{ + local isochron_dat=$1; shift + + # Count all received packets by looking at the non-zero RX timestamps + isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "%u\n" --printf-args "R" | \ + grep -w -v '0' | wc -l +} + +taprio_wait_for_admin() +{ + local if_name="$1"; shift + + "$tc_testing_scripts_dir/taprio_wait_for_admin.sh" "$(which tc)" "$if_name" +} diff --git a/tools/testing/selftests/net/gre_ipv6_lladdr.sh b/tools/testing/selftests/net/gre_ipv6_lladdr.sh new file mode 100755 index 000000000000..5b34f6e1f831 --- /dev/null +++ b/tools/testing/selftests/net/gre_ipv6_lladdr.sh @@ -0,0 +1,177 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +source ./lib.sh + +PAUSE_ON_FAIL="no" + +# The trap function handler +# +exit_cleanup_all() +{ + cleanup_all_ns + + exit "${EXIT_STATUS}" +} + +# Add fake IPv4 and IPv6 networks on the loopback device, to be used as +# underlay by future GRE devices. +# +setup_basenet() +{ + ip -netns "${NS0}" link set dev lo up + ip -netns "${NS0}" address add dev lo 192.0.2.10/24 + ip -netns "${NS0}" address add dev lo 2001:db8::10/64 nodad +} + +# Check if network device has an IPv6 link-local address assigned. +# +# Parameters: +# +# * $1: The network device to test +# * $2: An extra regular expression that should be matched (to verify the +# presence of extra attributes) +# * $3: The expected return code from grep (to allow checking the absence of +# a link-local address) +# * $4: The user visible name for the scenario being tested +# +check_ipv6_ll_addr() +{ + local DEV="$1" + local EXTRA_MATCH="$2" + local XRET="$3" + local MSG="$4" + + RET=0 + set +e + ip -netns "${NS0}" -6 address show dev "${DEV}" scope link | grep "fe80::" | grep -q "${EXTRA_MATCH}" + check_err_fail "${XRET}" $? "" + log_test "${MSG}" + set -e +} + +# Create a GRE device and verify that it gets an IPv6 link-local address as +# expected. +# +# Parameters: +# +# * $1: The device type (gre, ip6gre, gretap or ip6gretap) +# * $2: The local underlay IP address (can be an IPv4, an IPv6 or "any") +# * $3: The remote underlay IP address (can be an IPv4, an IPv6 or "any") +# * $4: The IPv6 interface identifier generation mode to use for the GRE +# device (eui64, none, stable-privacy or random). +# +test_gre_device() +{ + local GRE_TYPE="$1" + local LOCAL_IP="$2" + local REMOTE_IP="$3" + local MODE="$4" + local ADDR_GEN_MODE + local MATCH_REGEXP + local MSG + + ip link add netns "${NS0}" name gretest type "${GRE_TYPE}" local "${LOCAL_IP}" remote "${REMOTE_IP}" + + case "${MODE}" in + "eui64") + ADDR_GEN_MODE=0 + MATCH_REGEXP="" + MSG="${GRE_TYPE}, mode: 0 (EUI64), ${LOCAL_IP} -> ${REMOTE_IP}" + XRET=0 + ;; + "none") + ADDR_GEN_MODE=1 + MATCH_REGEXP="" + MSG="${GRE_TYPE}, mode: 1 (none), ${LOCAL_IP} -> ${REMOTE_IP}" + XRET=1 # No link-local address should be generated + ;; + "stable-privacy") + ADDR_GEN_MODE=2 + MATCH_REGEXP="stable-privacy" + MSG="${GRE_TYPE}, mode: 2 (stable privacy), ${LOCAL_IP} -> ${REMOTE_IP}" + XRET=0 + # Initialise stable_secret (required for stable-privacy mode) + ip netns exec "${NS0}" sysctl -qw net.ipv6.conf.gretest.stable_secret="2001:db8::abcd" + ;; + "random") + ADDR_GEN_MODE=3 + MATCH_REGEXP="stable-privacy" + MSG="${GRE_TYPE}, mode: 3 (random), ${LOCAL_IP} -> ${REMOTE_IP}" + XRET=0 + ;; + esac + + # Check that IPv6 link-local address is generated when device goes up + ip netns exec "${NS0}" sysctl -qw net.ipv6.conf.gretest.addr_gen_mode="${ADDR_GEN_MODE}" + ip -netns "${NS0}" link set dev gretest up + check_ipv6_ll_addr gretest "${MATCH_REGEXP}" "${XRET}" "config: ${MSG}" + + # Now disable link-local address generation + ip -netns "${NS0}" link set dev gretest down + ip netns exec "${NS0}" sysctl -qw net.ipv6.conf.gretest.addr_gen_mode=1 + ip -netns "${NS0}" link set dev gretest up + + # Check that link-local address generation works when re-enabled while + # the device is already up + ip netns exec "${NS0}" sysctl -qw net.ipv6.conf.gretest.addr_gen_mode="${ADDR_GEN_MODE}" + check_ipv6_ll_addr gretest "${MATCH_REGEXP}" "${XRET}" "update: ${MSG}" + + ip -netns "${NS0}" link del dev gretest +} + +test_gre4() +{ + local GRE_TYPE + local MODE + + for GRE_TYPE in "gre" "gretap"; do + printf "\n####\nTesting IPv6 link-local address generation on ${GRE_TYPE} devices\n####\n\n" + + for MODE in "eui64" "none" "stable-privacy" "random"; do + test_gre_device "${GRE_TYPE}" 192.0.2.10 192.0.2.11 "${MODE}" + test_gre_device "${GRE_TYPE}" any 192.0.2.11 "${MODE}" + test_gre_device "${GRE_TYPE}" 192.0.2.10 any "${MODE}" + done + done +} + +test_gre6() +{ + local GRE_TYPE + local MODE + + for GRE_TYPE in "ip6gre" "ip6gretap"; do + printf "\n####\nTesting IPv6 link-local address generation on ${GRE_TYPE} devices\n####\n\n" + + for MODE in "eui64" "none" "stable-privacy" "random"; do + test_gre_device "${GRE_TYPE}" 2001:db8::10 2001:db8::11 "${MODE}" + test_gre_device "${GRE_TYPE}" any 2001:db8::11 "${MODE}" + test_gre_device "${GRE_TYPE}" 2001:db8::10 any "${MODE}" + done + done +} + +usage() +{ + echo "Usage: $0 [-p]" + exit 1 +} + +while getopts :p o +do + case $o in + p) PAUSE_ON_FAIL="yes";; + *) usage;; + esac +done + +setup_ns NS0 + +set -e +trap exit_cleanup_all EXIT + +setup_basenet + +test_gre4 +test_gre6 diff --git a/tools/testing/selftests/net/mptcp/diag.sh b/tools/testing/selftests/net/mptcp/diag.sh index 4f55477ffe08..e7a75341f0f3 100755 --- a/tools/testing/selftests/net/mptcp/diag.sh +++ b/tools/testing/selftests/net/mptcp/diag.sh @@ -206,9 +206,8 @@ chk_dump_one() local token local msg - ss_token="$(ss -inmHMN $ns | grep 'token:' |\ - head -n 1 |\ - sed 's/.*token:\([0-9a-f]*\).*/\1/')" + ss_token="$(ss -inmHMN $ns | + mptcp_lib_get_info_value "token" "token")" token="$(ip netns exec $ns ./mptcp_diag -t $ss_token |\ awk -F':[ \t]+' '/^token/ {print $2}')" diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 13a3b68181ee..befa66f5a366 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -1441,6 +1441,15 @@ chk_join_nr() fi fi + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinSynAckHMacFailure") + if [ -z "$count" ]; then + rc=${KSFT_SKIP} + elif [ "$count" != "0" ]; then + rc=${KSFT_FAIL} + print_check "synack HMAC" + fail_test "got $count JOIN[s] synack HMAC failure expected 0" + fi + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinAckRx") if [ -z "$count" ]; then rc=${KSFT_SKIP} @@ -1450,6 +1459,15 @@ chk_join_nr() fail_test "got $count JOIN[s] ack rx expected $ack_nr" fi + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinAckHMacFailure") + if [ -z "$count" ]; then + rc=${KSFT_SKIP} + elif [ "$count" != "0" ]; then + rc=${KSFT_FAIL} + print_check "ack HMAC" + fail_test "got $count JOIN[s] ack HMAC failure expected 0" + fi + print_results "join Rx" ${rc} join_syn_tx="${join_syn_tx:-${syn_nr}}" \ diff --git a/tools/testing/selftests/net/netfilter/nft_concat_range.sh b/tools/testing/selftests/net/netfilter/nft_concat_range.sh index 47088b005390..1f5979c1510c 100755 --- a/tools/testing/selftests/net/netfilter/nft_concat_range.sh +++ b/tools/testing/selftests/net/netfilter/nft_concat_range.sh @@ -27,7 +27,7 @@ TYPES="net_port port_net net6_port port_proto net6_port_mac net6_port_mac_proto net6_port_net6_port net_port_mac_proto_net" # Reported bugs, also described by TYPE_ variables below -BUGS="flush_remove_add reload net_port_proto_match" +BUGS="flush_remove_add reload net_port_proto_match avx2_mismatch" # List of possible paths to pktgen script from kernel tree for performance tests PKTGEN_SCRIPT_PATHS=" @@ -387,6 +387,25 @@ race_repeat 0 perf_duration 0 " + +TYPE_avx2_mismatch=" +display avx2 false match +type_spec inet_proto . ipv6_addr +chain_spec meta l4proto . ip6 daddr +dst proto addr6 +src +start 1 +count 1 +src_delta 1 +tools ping +proto icmp6 + +race_repeat 0 + +perf_duration 0 +" + + # Set template for all tests, types and rules are filled in depending on test set_template=' flush ruleset @@ -1629,6 +1648,24 @@ test_bug_net_port_proto_match() { nft flush ruleset } +test_bug_avx2_mismatch() +{ + setup veth send_"${proto}" set || return ${ksft_skip} + + local a1="fe80:dead:01ff:0a02:0b03:6007:8009:a001" + local a2="fe80:dead:01fe:0a02:0b03:6007:8009:a001" + + nft "add element inet filter test { icmpv6 . $a1 }" + + dst_addr6="$a2" + send_icmp6 + + if [ "$(count_packets)" -gt "0" ]; then + err "False match for $a2" + return 1 + fi +} + test_reported_issues() { eval test_bug_"${subtest}" } diff --git a/tools/testing/selftests/net/skf_net_off.c b/tools/testing/selftests/net/skf_net_off.c new file mode 100644 index 000000000000..1fdf61d6cd7f --- /dev/null +++ b/tools/testing/selftests/net/skf_net_off.c @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* Open a tun device. + * + * [modifications: use IFF_NAPI_FRAGS, add sk filter] + * + * Expects the device to have been configured previously, e.g.: + * sudo ip tuntap add name tap1 mode tap + * sudo ip link set tap1 up + * sudo ip link set dev tap1 addr 02:00:00:00:00:01 + * sudo ip -6 addr add fdab::1 peer fdab::2 dev tap1 nodad + * + * And to avoid premature pskb_may_pull: + * + * sudo ethtool -K tap1 gro off + * sudo bash -c 'echo 0 > /proc/sys/net/ipv4/ip_early_demux' + */ + +#define _GNU_SOURCE + +#include <arpa/inet.h> +#include <errno.h> +#include <error.h> +#include <fcntl.h> +#include <getopt.h> +#include <linux/filter.h> +#include <linux/if.h> +#include <linux/if_packet.h> +#include <linux/if_tun.h> +#include <linux/ipv6.h> +#include <netinet/if_ether.h> +#include <netinet/in.h> +#include <netinet/ip.h> +#include <netinet/ip6.h> +#include <netinet/udp.h> +#include <poll.h> +#include <signal.h> +#include <stdbool.h> +#include <stddef.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/ioctl.h> +#include <sys/socket.h> +#include <sys/poll.h> +#include <sys/types.h> +#include <sys/uio.h> +#include <unistd.h> + +static bool cfg_do_filter; +static bool cfg_do_frags; +static int cfg_dst_port = 8000; +static char *cfg_ifname; + +static int tun_open(const char *tun_name) +{ + struct ifreq ifr = {0}; + int fd, ret; + + fd = open("/dev/net/tun", O_RDWR); + if (fd == -1) + error(1, errno, "open /dev/net/tun"); + + ifr.ifr_flags = IFF_TAP; + if (cfg_do_frags) + ifr.ifr_flags |= IFF_NAPI | IFF_NAPI_FRAGS; + + strncpy(ifr.ifr_name, tun_name, IFNAMSIZ - 1); + + ret = ioctl(fd, TUNSETIFF, &ifr); + if (ret) + error(1, ret, "ioctl TUNSETIFF"); + + return fd; +} + +static void sk_set_filter(int fd) +{ + const int offset_proto = offsetof(struct ip6_hdr, ip6_nxt); + const int offset_dport = sizeof(struct ip6_hdr) + offsetof(struct udphdr, dest); + + /* Filter UDP packets with destination port cfg_dst_port */ + struct sock_filter filter_code[] = { + BPF_STMT(BPF_LD + BPF_B + BPF_ABS, SKF_AD_OFF + SKF_AD_PKTTYPE), + BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, PACKET_HOST, 0, 4), + BPF_STMT(BPF_LD + BPF_B + BPF_ABS, SKF_NET_OFF + offset_proto), + BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, IPPROTO_UDP, 0, 2), + BPF_STMT(BPF_LD + BPF_H + BPF_ABS, SKF_NET_OFF + offset_dport), + BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, cfg_dst_port, 1, 0), + BPF_STMT(BPF_RET + BPF_K, 0), + BPF_STMT(BPF_RET + BPF_K, 0xFFFF), + }; + + struct sock_fprog filter = { + sizeof(filter_code) / sizeof(filter_code[0]), + filter_code, + }; + + if (setsockopt(fd, SOL_SOCKET, SO_ATTACH_FILTER, &filter, sizeof(filter))) + error(1, errno, "setsockopt attach filter"); +} + +static int raw_open(void) +{ + int fd; + + fd = socket(PF_INET6, SOCK_RAW, IPPROTO_UDP); + if (fd == -1) + error(1, errno, "socket raw (udp)"); + + if (cfg_do_filter) + sk_set_filter(fd); + + return fd; +} + +static void tun_write(int fd) +{ + const char eth_src[] = { 0x02, 0x00, 0x00, 0x00, 0x00, 0x02 }; + const char eth_dst[] = { 0x02, 0x00, 0x00, 0x00, 0x00, 0x01 }; + struct tun_pi pi = {0}; + struct ipv6hdr ip6h = {0}; + struct udphdr uh = {0}; + struct ethhdr eth = {0}; + uint32_t payload; + struct iovec iov[5]; + int ret; + + pi.proto = htons(ETH_P_IPV6); + + memcpy(eth.h_source, eth_src, sizeof(eth_src)); + memcpy(eth.h_dest, eth_dst, sizeof(eth_dst)); + eth.h_proto = htons(ETH_P_IPV6); + + ip6h.version = 6; + ip6h.payload_len = htons(sizeof(uh) + sizeof(uint32_t)); + ip6h.nexthdr = IPPROTO_UDP; + ip6h.hop_limit = 8; + if (inet_pton(AF_INET6, "fdab::2", &ip6h.saddr) != 1) + error(1, errno, "inet_pton src"); + if (inet_pton(AF_INET6, "fdab::1", &ip6h.daddr) != 1) + error(1, errno, "inet_pton src"); + + uh.source = htons(8000); + uh.dest = htons(cfg_dst_port); + uh.len = ip6h.payload_len; + uh.check = 0; + + payload = htonl(0xABABABAB); /* Covered in IPv6 length */ + + iov[0].iov_base = π + iov[0].iov_len = sizeof(pi); + iov[1].iov_base = ð + iov[1].iov_len = sizeof(eth); + iov[2].iov_base = &ip6h; + iov[2].iov_len = sizeof(ip6h); + iov[3].iov_base = &uh; + iov[3].iov_len = sizeof(uh); + iov[4].iov_base = &payload; + iov[4].iov_len = sizeof(payload); + + ret = writev(fd, iov, sizeof(iov) / sizeof(iov[0])); + if (ret <= 0) + error(1, errno, "writev"); +} + +static void raw_read(int fd) +{ + struct timeval tv = { .tv_usec = 100 * 1000 }; + struct msghdr msg = {0}; + struct iovec iov[2]; + struct udphdr uh; + uint32_t payload[2]; + int ret; + + if (setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv))) + error(1, errno, "setsockopt rcvtimeo udp"); + + iov[0].iov_base = &uh; + iov[0].iov_len = sizeof(uh); + + iov[1].iov_base = payload; + iov[1].iov_len = sizeof(payload); + + msg.msg_iov = iov; + msg.msg_iovlen = sizeof(iov) / sizeof(iov[0]); + + ret = recvmsg(fd, &msg, 0); + if (ret <= 0) + error(1, errno, "read raw"); + if (ret != sizeof(uh) + sizeof(payload[0])) + error(1, errno, "read raw: len=%d\n", ret); + + fprintf(stderr, "raw recv: 0x%x\n", payload[0]); +} + +static void parse_opts(int argc, char **argv) +{ + int c; + + while ((c = getopt(argc, argv, "fFi:")) != -1) { + switch (c) { + case 'f': + cfg_do_filter = true; + printf("bpf filter enabled\n"); + break; + case 'F': + cfg_do_frags = true; + printf("napi frags mode enabled\n"); + break; + case 'i': + cfg_ifname = optarg; + break; + default: + error(1, 0, "unknown option %c", optopt); + break; + } + } + + if (!cfg_ifname) + error(1, 0, "must specify tap interface name (-i)"); +} + +int main(int argc, char **argv) +{ + int fdt, fdr; + + parse_opts(argc, argv); + + fdr = raw_open(); + fdt = tun_open(cfg_ifname); + + tun_write(fdt); + raw_read(fdr); + + if (close(fdt)) + error(1, errno, "close tun"); + if (close(fdr)) + error(1, errno, "close udp"); + + fprintf(stderr, "OK\n"); + return 0; +} + diff --git a/tools/testing/selftests/net/skf_net_off.sh b/tools/testing/selftests/net/skf_net_off.sh new file mode 100755 index 000000000000..5da5066fb465 --- /dev/null +++ b/tools/testing/selftests/net/skf_net_off.sh @@ -0,0 +1,30 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +readonly NS="ns-$(mktemp -u XXXXXX)" + +cleanup() { + ip netns del $NS +} + +ip netns add $NS +trap cleanup EXIT + +ip -netns $NS link set lo up +ip -netns $NS tuntap add name tap1 mode tap +ip -netns $NS link set tap1 up +ip -netns $NS link set dev tap1 addr 02:00:00:00:00:01 +ip -netns $NS -6 addr add fdab::1 peer fdab::2 dev tap1 nodad +ip netns exec $NS ethtool -K tap1 gro off + +# disable early demux, else udp_v6_early_demux pulls udp header into linear +ip netns exec $NS sysctl -w net.ipv4.ip_early_demux=0 + +echo "no filter" +ip netns exec $NS ./skf_net_off -i tap1 + +echo "filter, linear skb (-f)" +ip netns exec $NS ./skf_net_off -i tap1 -f + +echo "filter, fragmented skb (-f) (-F)" +ip netns exec $NS ./skf_net_off -i tap1 -f -F diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c index 9a85f93c33d8..5ded3b3a7538 100644 --- a/tools/testing/selftests/net/tls.c +++ b/tools/testing/selftests/net/tls.c @@ -1753,6 +1753,42 @@ TEST_F(tls_basic, rekey_tx) EXPECT_EQ(memcmp(buf, test_str, send_len), 0); } +TEST_F(tls_basic, disconnect) +{ + char const *test_str = "test_message"; + int send_len = strlen(test_str) + 1; + struct tls_crypto_info_keys key; + struct sockaddr_in addr; + char buf[20]; + int ret; + + if (self->notls) + return; + + tls_crypto_info_init(TLS_1_3_VERSION, TLS_CIPHER_AES_GCM_128, + &key, 0); + + ret = setsockopt(self->fd, SOL_TLS, TLS_TX, &key, key.len); + ASSERT_EQ(ret, 0); + + /* Pre-queue the data so that setsockopt parses it but doesn't + * dequeue it from the TCP socket. recvmsg would dequeue. + */ + EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len); + + ret = setsockopt(self->cfd, SOL_TLS, TLS_RX, &key, key.len); + ASSERT_EQ(ret, 0); + + addr.sin_family = AF_UNSPEC; + addr.sin_addr.s_addr = htonl(INADDR_ANY); + addr.sin_port = 0; + ret = connect(self->cfd, &addr, sizeof(addr)); + EXPECT_EQ(ret, -1); + EXPECT_EQ(errno, EOPNOTSUPP); + + EXPECT_EQ(recv(self->cfd, buf, send_len, 0), send_len); +} + TEST_F(tls, rekey) { char const *test_str_1 = "test_message_before_rekey"; |