summaryrefslogtreecommitdiff
path: root/Documentation/networking/device_drivers/ethernet
AgeCommit message (Collapse)Author
2025-06-22Fix typo in marvell octeontx2 documentationFaisal Bukhari
Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst Fixes a spelling mistake: "funcionality" → "functionality". Signed-off-by: Faisal Bukhari <faisalbukhari523@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-05-21hinic3: module initialization and tx/rx logicFan Gong
This is [1/3] part of hinic3 Ethernet driver initial submission. With this patch hinic3 is a valid kernel module but non-functional driver. The driver parts contained in this patch: Module initialization. PCI driver registration but with empty id_table. Auxiliary driver registration. Net device_ops registration but open/stop are empty stubs. tx/rx logic. All major data structures of the driver are fully introduced with the code that uses them but without their initialization code that requires management interface with the hw. Co-developed-by: Xin Guo <guoxin09@huawei.com> Signed-off-by: Xin Guo <guoxin09@huawei.com> Signed-off-by: Fan Gong <gongfan1@huawei.com> Co-developed-by: Gur Stavi <gur.stavi@huawei.com> Signed-off-by: Gur Stavi <gur.stavi@huawei.com> Link: https://patch.msgid.link/76a137ffdfe115c737c2c224f0c93b60ba53cc16.1747736586.git.gur.stavi@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-15eth: fbnic: Add devlink dev flash supportLee Trager
Add support to update the CMRT and control firmware as well as the UEFI driver on fbnic using devlink dev flash. Make sure the shutdown / quiescence paths like suspend take the devlink lock to prevent them from interrupting the FW flashing process. Signed-off-by: Lee Trager <lee@trager.us> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250512190109.2475614-6-lee@trager.us Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-28net: ti: icssg-prueth: Add ICSSG FW StatsMD Danish Anwar
The ICSSG firmware maintains set of stats called PA_STATS. Currently the driver only dumps 4 stats. Add support for dumping more stats. The offset for different stats are defined as MACROs in icssg_switch_map.h file. All the offsets are for Slice0. Slice1 offsets are slice0 + 4. The offset calculation is taken care while reading the stats in emac_update_hardware_stats(). The statistics are documented in Documentation/networking/device_drivers/icssg_prueth.rst Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Link: https://patch.msgid.link/20250424095316.2643573-1-danishanwar@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-15eth: fbnic: add support for TTI HW statsMohsin Bashir
Add coverage for the TX Extension (TEI) Interface (TTI) stats. We are tracking packets and control message drops because of credit exhaustion on the TX interface. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410070859.4160768-6-mohsin.bashr@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-15eth: fbnic: add support for TMI statsMohsin Bashir
This patch add coverage for TMI stats including PTP stats and drop stats. PTP stats include illegal requests, bad timestamp and good timestamps. The bad timestamp and illegal request counters are reported under as `error` via `ethtool -T` Both these counters are individually being reported via `ethtool -S` The good timestamp stats are being reported as `pkts` via `ethtool -T` ethtool -S eth0 | grep "ptp" ptp_illegal_req: 0 ptp_good_ts: 0 ptp_bad_ts: 0 Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410070859.4160768-5-mohsin.bashr@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-15eth: fbnic: add coverage for RXB statsMohsin Bashir
This patch provides coverage to the RXB (RX Buffer) stats. RXB stats are divided into 3 sections: RXB enqueue, RXB FIFO, and RXB dequeue stats. The RXB enqueue/dequeue stats are indexed from 0-3 and cater for the input/output counters whereas, the RXB fifo stats are indexed from 0-7. The RXB also supports pause frame stats counters which we are leaving for a later patch. ethtool -S eth0 | grep rxb rxb_integrity_err0: 0 rxb_mac_err0: 0 rxb_parser_err0: 0 rxb_frm_err0: 0 rxb_drbo0_frames: 1433543 rxb_drbo0_bytes: 775949081 --- --- rxb_intf3_frames: 1195711 rxb_intf3_bytes: 739650210 rxb_pbuf3_frames: 1195711 rxb_pbuf3_bytes: 765948092 Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410070859.4160768-4-mohsin.bashr@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-15eth: fbnic: add coverage for hw queue statsMohsin Bashir
This patch provides support for hardware queue stats and covers packet errors for RX-DMA engine, RCQ drops and BDQ drops. The packet errors are also aggregated with the `rx_errors` stats in the `rtnl_link_stats` as well as with the `hw_drops` in the queue API. The RCQ and BDQ drops are aggregated with `rx_over_errors` in the `rtnl_link_stats` as well as with the `hw_drop_overruns` in the queue API. ethtool -S eth0 | grep -E 'rde' rde_0_pkt_err: 0 rde_0_pkt_cq_drop: 0 rde_0_pkt_bdq_drop: 0 --- --- rde_127_pkt_err: 0 rde_127_pkt_cq_drop: 0 rde_127_pkt_bdq_drop: 0 Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410070859.4160768-3-mohsin.bashr@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-27Merge tag 'powerpc-6.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Madhavan Srinivasan: - Remove support for IBM Cell Blades - SMP support for microwatt platform - Support for inline static calls on PPC32 - Enable pmu selftests for power11 platform - Enable hardware trace macro (HTM) hcall support - Support for limited address mode capability - Changes to RMA size from 512 MB to 768 MB to handle fadump - Misc fixes and cleanups Thanks to Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann, Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom, Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook, Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani (IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav Jain, and Venkat Rao Bagalkote. * tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (61 commits) powerpc/kexec: fix physical address calculation in clear_utlb_entry() crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD powerpc: Fix 'intra_function_call not a direct call' warning powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu' KVM: PPC: Enable CAP_SPAPR_TCE_VFIO on pSeries KVM guests powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7 powerpc/microwatt: Add SMP support powerpc: Define config option for processors with broadcast TLBIE powerpc/microwatt: Define an idle power-save function powerpc/microwatt: Device-tree updates powerpc/microwatt: Select COMMON_CLK in order to get the clock framework net: toshiba: Remove reference to PPC_IBM_CELL_BLADE net: spider_net: Remove powerpc Cell driver cpufreq: ppc_cbe: Remove powerpc Cell driver genirq: Remove IRQ_EDGE_EOI_HANDLER docs: Remove reference to removed CBE_CPUFREQ_SPU_GOVERNOR powerpc: Remove UDBG_RTAS_CONSOLE powerpc/io: Use standard barrier macros in io.c powerpc/io: Rename _insw_ns() etc. powerpc/io: Use generic raw accessors ...
2025-03-21net/mlx5e: Expose port reset cycle recovery counter via ethtoolYael Chemla
Display recovery event of PPCNT recovery counters group. Counts (per link) the number of total successful recovery events of any recovery types during port reset cycle. Signed-off-by: Yael Chemla <ychemla@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/1742112876-2890-5-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-26net: spider_net: Remove powerpc Cell driverMichael Ellerman
This driver can no longer be built since support for IBM Cell Blades was removed, in particular PPC_IBM_CELL_BLADE. Remove the driver and the documentation. Remove the MAINTAINERS entry, and add Ishizaki and Geoff to CREDITS. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241218105523.416573-24-mpe@ellerman.id.au
2025-02-13Documentation: dpaa2 ethernet switch driver: Fix spellingRitvik Gupta
Corrected spelling mistake Signed-off-by: Ritvik Gupta <ritvikfoss@gmail.com> Link: https://patch.msgid.link/20250212021311.13257-1-ritvikfoss@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-07i40e: add ability to reset VF for Tx and Rx MDD eventsAleksandr Loktionov
Implement "mdd-auto-reset-vf" priv-flag to handle Tx and Rx MDD events for VFs. This flag is also used in other network adapters like ICE. Usage: - "on" - The problematic VF will be automatically reset if a malformed descriptor is detected. - "off" - The problematic VF will be disabled. In cases where a VF sends malformed packets classified as malicious, it can cause the Tx queue to freeze, rendering it unusable for several minutes. When an MDD event occurs, this new implementation allows for a graceful VF reset to quickly restore operational state. Currently, VF queues are disabled if an MDD event occurs. This patch adds the ability to reset the VF if a Tx or Rx MDD event occurs. It also includes MDD event logging throttling to avoid dmesg pollution and unifies the format of Tx and Rx MDD messages. Note: Standard message rate limiting functions like dev_info_ratelimited() do not meet our requirements. Custom rate limiting is implemented, please see the code for details. Co-developed-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Co-developed-by: Padraig J Connolly <padraig.j.connolly@intel.com> Signed-off-by: Padraig J Connolly <padraig.j.connolly@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250106221929.956999-13-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18eth: fbnic: add RPC hardware statisticsSanman Pradhan
Report Rx parser statistics via ethtool -S. The parser stats are 32b, so we need to add refresh to the service task to make sure we don't miss overflows. Signed-off-by: Sanman Pradhan <sanman.p211993@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241115015344.757567-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18eth: fbnic: add PCIe hardware statisticsSanman Pradhan
Add PCIe hardware statistics support to the fbnic driver. These stats provide insight into PCIe transaction performance and error conditions. Which includes, read/write and completion TLP counts and DWORD counts and debug counters for tag, completion credit and NP credit exhaustion The stats are exposed via debugfs and can be used to monitor PCIe performance and debug PCIe issues. Signed-off-by: Sanman Pradhan <sanman.p211993@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241115015344.757567-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13Documentation: octeontx2: Add Documentation for RVU representorsGeetha sowjanya
Adds documentation for creating and configuring rvu port representors Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-10-08ice: Implement ethtool reset supportWojciech Drewek
Enable ethtool reset support. Ethtool reset flags are mapped to the E810 reset type: PF reset: $ ethtool --reset <ethX> irq dma filter offload CORE reset: $ ethtool --reset <ethX> irq-shared dma-shared filter-shared \ offload-shared ram-shared GLOBAL reset: $ ethtool --reset <ethX> irq-shared dma-shared filter-shared \ offload-shared mac-shared phy-shared ram-shared Calling the same set of flags as in PF reset case on port representor triggers VF reset. Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-12net/mlx5e: SHAMPO, Add no-split ethtool counters for header/data splitDragos Tatulea
When SHAMPO can't identify the protocol/header of a packet, it will yield a packet that is not split - all the packet is in the data part. Count this value in packets and bytes. Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240911201757.1505453-15-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-12net: ena: Add ENA Express metrics supportDavid Arinzon
ENA Express metrics, called `ena_srd` are exposed to customers via `ethtool`. The metrics allow customers to check the configuration (mode), tx/rx counters as well as resource utilization. The documentation is also updated to provide a general explanation about ENA Express as well as links for further information about metrics and configurations. Signed-off-by: Igor Chauskin <igorch@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://patch.msgid.link/20240909084704.13856-2-darinzon@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10Merge tag 'mlx5-updates-2024-09-02' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2024-08-29 HW-Managed Flow Steering in mlx5 driver Yevgeny Kliteynik says: ======================= 1. Overview ----------- ConnectX devices support packet matching, modification, and redirection. This functionality is referred as Flow Steering. To configure a steering rule, the rule is written to the device-owned memory. This memory is accessed and cached by the device when processing a packet. The first implementation of Flow Steering was done in FW, and it is referred in the mlx5 driver as Device-Managed Flow Steering (DMFS). Later we introduced SW-managed Flow Steering (SWS or SMFS), where the driver is writing directly to the device's configuration memory (ICM) through RC QP using RDMA operations (RDMA-read and RDAM-write), thus achieving higher rates of rule insertion/deletion. Now we introduce a new flow steering implementation: HW-Managed Flow Steering (HWS or HMFS). In this new approach, the driver is configuring steering rules directly to the HW using the WQs with a special new type of WQE. This way we can reach higher rule insertion/deletion rate with much lower CPU utilization compared to SWS. The key benefits of HWS as opposed to SWS: + HW manages the steering decision tree - HW calculates CRC for each entry - HW handles tree hash collisions - HW & FW manage objects refcount + HW keeps cache coherency: - HW provides tree access locking and synchronization - HW provides notification on completion + Insertion rate isn’t affected by background traffic - Dedicated HW components that handle insertion 2. Performance -------------- Measuring Connection Tracking with simple IPv4 flows w/o NAT, we are able to get ~5 times more flows offloaded per second using HWS. 3. Configuration ---------------- The enablement of HWS mode in eswitch manager is done using the same devlink param that is already used for switching between FW-managed steering and SW-managed steering modes: # devlink dev param set pci/<PCI_ID> name flow_steering_mode cmod runtime value hmfs 4. Upstream Submission ---------------------- HWS support consists of 3 main components: + Steering: - The lower layer that exposes HWS API to upper layers and implements all the management of flow steering building blocks + FS-Core - Implementation of fs_hws layer to enable fs_core to use HWS instead of FW or SW steering - Create HW steering action pools to utilize the ability of HWS to share steering actions among different rules - Add support for configuring HWS mode through devlink command, similar to configuring SWS mode + Connection Tracking - Implementation of CT support for HW steering - Hooks up the CT ops for the new steering mode and uses the HWS API to implement connection tracking. Because of the large number of patches, we need to perform the submission in several separate patch series. This series is the first submission that lays the ground work for the next submissions, where an actual user of HWS will be added. 5. Patches in this series ------------------------- This patch series contains implementation of the first bullet from above. ======================= * tag 'mlx5-updates-2024-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: HWS, added API and enabled HWS support net/mlx5: HWS, added send engine and context handling net/mlx5: HWS, added debug dump and internal headers net/mlx5: HWS, added backward-compatible API handling net/mlx5: HWS, added memory management handling net/mlx5: HWS, added vport handling net/mlx5: HWS, added modify header pattern and args handling net/mlx5: HWS, added FW commands handling net/mlx5: HWS, added matchers functionality net/mlx5: HWS, added definers handling net/mlx5: HWS, added rules handling net/mlx5: HWS, added tables handling net/mlx5: HWS, added actions handling net/mlx5: Added missing definitions in preparation for HW Steering net/mlx5: Added missing mlx5_ifc definition for HW Steering ==================== Link: https://patch.msgid.link/20240909181250.41596-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10eth: fbnic: Add devlink firmware version infoLee Trager
This adds support to show firmware version information for both stored and running firmware versions. The version and commit is displayed separately to aid monitoring tools which only care about the version. Example output: # devlink dev info pci/0000:01:00.0: driver fbnic serial_number 88-25-08-ff-ff-01-50-92 versions: running: fw 24.07.15-017 fw.commit h999784ae9df0 fw.bootloader 24.07.10-000 fw.bootloader.commit hfef3ac835ce7 stored: fw 24.07.24-002 fw.commit hc9d14a68b3f2 fw.bootloader 24.07.22-000 fw.bootloader.commit h922f8493eb96 fw.undi 01.00.03-000 Signed-off-by: Lee Trager <lee@trager.us> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240905233820.1713043-1-lee@trager.us Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-09net/mlx5: HWS, added API and enabled HWS supportYevgeny Kliteynik
Enabling HWS support in the mlx5 driver: - added HWS API header - added HWS files in the mlx5 driver makefile - added kconfig flag that enables HWS compilation Reviewed-by: Erez Shitrit <erezsh@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-07-17Merge tag 'devicetree-for-6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT Bindings: - Convert and add a bunch of IBM FSI related bindings - Add a new schema listing legacy compatibles which will (probably) never be documented. This will silence various checks warning about them. - Add bindings for Sierra Wireless mangOH Green SPI IoT interface, new Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75 GPI DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and CSI-2 blocks - Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema - Drop obsolete stericsson,abx500.txt DT core: - Update dtc to upstream version v1.7.0-93-g1df7b047fe43 - Add support to run DT validation on DTs with applied overlays - Add helper for creating boolean properties in dynamic nodes and use that for dynamic PCI nodes - Clean-up early parsing of '#{address,size}-cells'" * tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits) dt-bindings: timer: sprd-timer: convert to YAML dt-bindings: incomplete-devices: document devices without bindings dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43 dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node dt-bindings: soc: fsl: cpm_qe: convert to yaml format dt-bindings: i2c: i2c-fsi: Convert to json-schema dt-bindings: fsi: Document the FSI Hub Controller dt-bindings: fsi: Document the AST2700 FSI controller dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller dt-bindings: fsi: Document the FSI controller common properties dt-bindings: fsi: Document the IBM SBEFIFO engine dt-bindings: fsi: p9-occ: Convert to json-schema dt-bindings: fsi: Document the IBM SCOM engine dt-bindings: fsi: fsi2spi: Document SPI controller child nodes dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yaml dt-bindings: soc: fsl: Convert q(b)man-* to yaml format dt-bindings: misc: fsl,qoriq-mc: convert to yaml format dt-bindings: drop stale Anson Huang from maintainers ...
2024-07-09dt-bindings: misc: fsl,qoriq-mc: convert to yaml formatFrank Li
Convert fsl,qoriq-mc from txt to yaml format. Addition changes: - Child node name allow 'ethernet'. - Use 32bit address in example. - Fixed missed ';' in example. - Allow dma-coherent. - Remove smmu, its part in example. - Change child node name as 'ethernet' Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20240617170934.813321-1-Frank.Li@nxp.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-06-05net/mlx5e: SHAMPO, Add header-only ethtool counters for header data splitTariq Toukan
Count the number of header-only packets and bytes from SHAMPO. Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240603212219.1037656-12-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-05net/mlx5e: SHAMPO, Drop rx_gro_match_packets counterDragos Tatulea
After modifying rx_gro_packets to be more accurate, the rx_gro_match_packets counter is redundant. Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240603212219.1037656-11-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-05net/mlx5e: SHAMPO, Make GRO counters more preciseDragos Tatulea
Don't count non GRO packets. A non GRO packet is a packet with a GRO cb count of 1. Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240603212219.1037656-10-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-05net/mlx5e: Introduce timestamps statistic counter for Tx DMA layerRahul Rameshbabu
Count number of transmitted packets that were hardware timestamped at the device DMA layer. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Link: https://lore.kernel.org/r/20240403212931.128541-4-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-05net/mlx5e: Introduce lost_cqe statistic counter for PTP Tx port timestamping CQRahul Rameshbabu
Track the number of times a CQE was expected to not be delivered on PTP Tx port timestamping CQ. A CQE is expected to not be delivered if a certain amount of time passes since the corresponding CQE containing the DMA timestamp information has arrived. Increment the late_cqe counter when such a CQE does manage to be delivered to the CQ. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20240403212931.128541-3-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-20ionic: update documentation for XDP supportShannon Nelson
Add information to our documentation for the XDP features and related ethtool stats. While we're here, we also add the missing timestamp stats. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240319163534.38796-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-06ice: Implement RSS settings for GTP using ethtoolTakeru Hayasaka
Following the addition of new GTP RSS hash options to ethtool.h, this patch implements the corresponding RSS settings for GTP packets in the Intel ice driver. It enables users to configure RSS for GTP-U and GTP-C traffic over IPv4 and IPv6, utilizing the newly defined hash options. The implementation covers the handling of gtpu(4|6), gtpc(4|6), gtpc(4|6)t, gtpu(4|6)e, gtpu(4|6)u, and gtpu(4|6)d traffic, providing enhanced load distribution for GTP traffic across multiple processing units. Signed-off-by: Takeru Hayasaka <hayatake396@gmail.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-12octeon_ep_vf: Add driver framework and device initializationShinas Rasheed
Add driver framework and device setup and initialization for Octeon PCI Endpoint NIC VF. Add implementation to load module, initialize, register network device, cleanup and unload module. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-01net: ena: Add more documentation for RX copybreakDavid Arinzon
This patch contains more details about the functionality of RX copybreak. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-04Revert "octeon_ep_vf: add octeon_ep_vf driver"Jakub Kicinski
This reverts commit c902ba322cfda8ebe54ffd53392ef7e2ef5d1c65. This reverts commit 50648968b3e3c193b45eaca07840111c9d4fdb74. This reverts commit 77cef1e02104529f54c5b8b4126317eda3ff132d. This reverts commit 8f8d322bc47c1c5ecab1f2238b644e30f69cc475. This reverts commit 6ca7b5486ebd5e7985f0c98a2ac7ae49078043a4. This reverts commit db468f92c3b9437dfeb1dcf55d9b7d1b97769a6c. This reverts commit 5f8c64c2344c888a03fa4b7fd8c3b5e0c235d879. This reverts commit ebdc193b2ce209bfc1ebec2f777cd7bac00b547c. The driver needs more work. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-03net: ena: Move XDP code to its new filesDavid Arinzon
XDP system has a very large footprint in the driver's overall code. makes the whole driver's code much harder to read. Moving XDP code to dedicated files. This patch doesn't make any changes to the code itself and only cut-pastes the code into ena_xdp.c and ena_xdp.h files so the change is purely cosmetic. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://lore.kernel.org/r/20240101190855.18739-2-darinzon@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-02octeon_ep_vf: Add driver framework and device initializationShinas Rasheed
Add driver framework and device setup and initialization for Octeon PCI Endpoint NIC VF. Add implementation to load module, initialize, register network device, cleanup and unload module. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-14ice: add documentation for FW loggingPaul M Stillwell Jr
Add documentation for FW logging in Documentation/networking/device_drivers/ethernet/intel/ice.rst Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-30octeon_ep: support OCTEON CN98 devicesShinas Rasheed
Add PCI Endpoint NIC support for Octeon CN98 devices. CN98 devices are part of Octeon 9 family products with similar PCI NIC characteristics to CN93, already supported driver. Add CN98 card to the device id table, as well as support differences in the register fields and certain usage scenarios such as unload. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://lore.kernel.org/r/20231129045348.2538843-3-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-21octeon_ep: support Octeon CN10K devicesShinas Rasheed
Add PCI Endpoint NIC support for Octeon CN10K devices. CN10K devices are part of Octeon 10 family products with similar PCI NIC characteristics. These include: - CN10KA - CNF10KA - CNF10KB - CN10KB Update supported device list in Documentation Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://lore.kernel.org/r/20231117103817.2468176-1-srasheed@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-01Merge tag 'asm-generic-6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull ia64 removal and asm-generic updates from Arnd Bergmann: - The ia64 architecture gets its well-earned retirement as planned, now that there is one last (mostly) working release that will be maintained as an LTS kernel. - The architecture specific system call tables are updated for the added map_shadow_stack() syscall and to remove references to the long-gone sys_lookup_dcookie() syscall. * tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: hexagon: Remove unusable symbols from the ptrace.h uapi asm-generic: Fix spelling of architecture arch: Reserve map_shadow_stack() syscall number for all architectures syscalls: Cleanup references to sys_lookup_dcookie() Documentation: Drop or replace remaining mentions of IA64 lib/raid6: Drop IA64 support Documentation: Drop IA64 from feature descriptions kernel: Drop IA64 support from sig_fault handlers arch: Remove Itanium (IA-64) architecture
2023-10-14net/mlx5: fix config name in Kconfig parameter documentationLukas Bulwahn
Commit a12ba19269d7 ("net/mlx5: Update Kconfig parameter documentation") adds documentation on Kconfig options for the mlx5 driver. It refers to the config MLX5_EN_MACSEC for MACSec offloading, but the config is actually called MLX5_MACSEC. Fix the reference to the right config name in the documentation. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-09-13idpf: add SRIOV support and other ndo_opsJoshua Hay
Add support for SRIOV: send the requested number of VFs to the device Control Plane, via the virtchnl message and then enable the VFs using 'pci_enable_sriov'. Add other ndo ops supported by the driver such as features_check, set_rx_mode, validate_addr, set_mac_address, change_mtu, get_stats64, set_features, and tx_timeout. Initialize the statistics task which requests the queue related statistics to the CP. Add loopback and promiscuous mode support and the respective virtchnl messages. Finally, add documentation and build support for the driver. Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Co-developed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Co-developed-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-11Documentation: Drop or replace remaining mentions of IA64Ard Biesheuvel
Drop or update mentions of IA64, as appropriate. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-08-30Merge tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: - VFIO direct character device (cdev) interface support. This extracts the vfio device fd from the container and group model, and is intended to be the native uAPI for use with IOMMUFD (Yi Liu) - Enhancements to the PCI hot reset interface in support of cdev usage (Yi Liu) - Fix a potential race between registering and unregistering vfio files in the kvm-vfio interface and extend use of a lock to avoid extra drop and acquires (Dmitry Torokhov) - A new vfio-pci variant driver for the AMD/Pensando Distributed Services Card (PDS) Ethernet device, supporting live migration (Brett Creeley) - Cleanups to remove redundant owner setup in cdx and fsl bus drivers, and simplify driver init/exit in fsl code (Li Zetao) - Fix uninitialized hole in data structure and pad capability structures for alignment (Stefan Hajnoczi) * tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits) vfio/pds: Send type for SUSPEND_STATUS command vfio/pds: fix return value in pds_vfio_get_lm_file() pds_core: Fix function header descriptions vfio: align capability structures vfio/type1: fix cap_migration information leak vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver vfio/pds: Add Kconfig and documentation vfio/pds: Add support for firmware recovery vfio/pds: Add support for dirty page tracking vfio/pds: Add VFIO live migration support vfio/pds: register with the pds_core PF pds_core: Require callers of register/unregister to pass PF drvdata vfio/pds: Initial support for pds VFIO driver vfio: Commonize combine_ranges for use in other VFIO drivers kvm/vfio: avoid bouncing the mutex when adding and deleting groups kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add() docs: vfio: Add vfio device cdev description vfio: Compile vfio_group infrastructure optionally vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev() ...
2023-08-27net/mlx5: Implement devlink port function cmds to control ipsec_packetDima Chumak
Implement devlink port function commands to enable / disable IPsec packet offloads. This is used to control the IPsec capability of the device. When ipsec_offload is enabled for a VF, it prevents adding IPsec packet offloads on the PF, because the two cannot be active simultaneously due to HW constraints. Conversely, if there are any active IPsec packet offloads on the PF, it's not allowed to enable ipsec_packet on a VF, until PF IPsec offloads are cleared. Signed-off-by: Dima Chumak <dchumak@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230825062836.103744-9-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-27net/mlx5: Implement devlink port function cmds to control ipsec_cryptoDima Chumak
Implement devlink port function commands to enable / disable IPsec crypto offloads. This is used to control the IPsec capability of the device. When ipsec_crypto is enabled for a VF, it prevents adding IPsec crypto offloads on the PF, because the two cannot be active simultaneously due to HW constraints. Conversely, if there are any active IPsec crypto offloads on the PF, it's not allowed to enable ipsec_crypto on a VF, until PF IPsec offloads are cleared. Signed-off-by: Dima Chumak <dchumak@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230825062836.103744-8-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-21net/mlx5: Update dead links in Kconfig documentationRahul Rameshbabu
Point to NVIDIA documentation for device specific information now that the Mellanox documentation site is deprecated. Refer to kernel documentation sources for generic information not specific to mlx5 devices. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-08-21net/mlx5e: aRFS, Introduce ethtool statsAdham Faris
Improve aRFS observability by adding new set of counters. Each Rx ring will have this set of counters listed below. These counters are exposed through ethtool -S. 1) arfs_add: number of times a new rule has been created. 2) arfs_request_in: number of times a rule was requested to move from its current Rx ring to a new Rx ring (incremented on the destination Rx ring). 3) arfs_request_out: number of times a rule was requested to move out from its current Rx ring (incremented on source/current Rx ring). 4) arfs_expired: number of times a rule has been expired by the kernel and removed from HW. 5) arfs_err: number of times a rule creation or modification has failed. This patch removes rx[i]_xsk_arfs_err counter and its documentation in mlx5/counters.rst since aRFS activity does not occur in XSK RQ's. Signed-off-by: Adham Faris <afaris@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com>
2023-08-16vfio/pds: Add Kconfig and documentationBrett Creeley
Add Kconfig entries and pds-vfio-pci.rst. Also, add an entry in the MAINTAINERS file for this new driver. It's not clear where documentation for vendor specific VFIO drivers should live, so just re-use the current amd ethernet location. Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20230807205755.29579-9-brett.creeley@amd.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-08-14net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEsRahul Rameshbabu
Use a map structure for associating CQEs containing port timestamping information with the appropriate skb. Track order of WQEs submitted using a FIFO. Check if the corresponding port timestamping CQEs from the lookup values in the FIFO are considered dropped due to time elapsed. Return the lookup value to a freelist after consuming the skb. Reuse the freed lookup in future WQE submission iterations. The map structure uses an integer identifier for the key and returns an skb corresponding to that identifier. Embed the integer identifier in the WQE submitted to the WQ for the transmit path when the SQ is a PTP (port timestamping) SQ. The embedded identifier can then be queried using a field in the CQE of the corresponding port timestamping CQ. In the port timestamping napi_poll context, the identifier is queried from the CQE polled from CQ and used to lookup the corresponding skb from the WQE submit path. The skb reference is removed from map and then embedded with the port HW timestamp information from the CQE and eventually consumed. The metadata freelist FIFO is an array containing integer identifiers that can be pushed and popped in the FIFO. The purpose of this structure is bookkeeping what identifier values can safely be used in a subsequent WQE submission and should not contain identifiers that have still not been reaped by processing a corresponding CQE completion on the port timestamping CQ. The ts_cqe_pending_list structure is a combination of an array and linked list. The array is pre-populated with the nodes that will be added and removed from the head of the linked list. Each node contains the unique identifier value associated with the values submitted in the WQEs and retrieved in the port timestamping CQEs. When a WQE is submitted, the node in the array corresponding to the identifier popped from the metadata freelist is added to the end of the CQE pending list and is marked as "in-use". The node is removed from the linked list under two conditions. The first condition is that the corresponding port timestamping CQE is polled in the PTP napi_poll context. The second condition is that more than a second has elapsed since the DMA timestamp value corresponding to the WQE submission. When the first condition occurs, the "in-use" bit in the linked list node is cleared, and the resources corresponding to the WQE submission are then released. The second condition, however, indicates that the port timestamping CQE will likely never be delivered. It's not impossible for the device to post a CQE after an infinite amount of time though highly improbable. In order to be resilient to this improbable case, resources related to the corresponding WQE submission are still kept, the identifier value is not returned to the freelist, and the "in-use" bit is cleared on the node to indicate that it's no longer part of the linked list of "likely to be delivered" port timestamping CQE identifiers. A count for the number of port timestamping CQEs considered highly likely to never be delivered by the device is maintained. This count gets decremented in the unlikely event a port timestamping CQE considered unlikely to ever be delivered is polled in the PTP napi_poll context. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit (git 2.34.1) at 2025-07-15 19:18:47 +0000