summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/xilinx
AgeCommit message (Collapse)Author
2025-02-21arm64: zynqmp: Use DT header for firmware constantsMichal Simek
Firmware contants do not fit the purpose of bindings because they are not independent IDs for abstractions. They are more or less just contants which better to wire via header with DT which is using it. That's why copy header to platform folder (align macro) and use it locally. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/c3f011812597f4c3095448726f5924b2334c7da1.1738600745.git.michal.simek@amd.com
2025-02-17arm64: versal-net: Add description for b2197-00 revA boardMichal Simek
Add description for VN-X board. The board is using Versal NET SoC which has 16 a78 cores with additional IPs. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/1b23d64107220f5b48fc77ba28c5e59a20d83600.1738657826.git.michal.simek@amd.com
2025-02-03arm64: zynqmp: add clock-output-names property in clock nodesNaman Trivedi
Add clock-output-names property to clock nodes, so that the resulting clock name do not change when clock node name is changed. Also, replace underscores with hyphens in the clock node names as per dt-schema rule. Signed-off-by: Naman Trivedi <naman.trivedimanojbhai@amd.com> Acked-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com> Link: https://lore.kernel.org/r/20241122095712.1166883-1-naman.trivedimanojbhai@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-12-19arm64: dts: zynqmp: Add DMA for DP audioTomi Valkeinen
Add the two DMA channels used for the DisplayPort audio to the zynqmp_dpsub node. Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241023-xilinx-dp-audio-v4-2-5128881457be@ideasonboard.com
2024-10-02arm64: zynqmp: Add thermal zonesSean Anderson
Add some thermal trip points. We can't undervolt the CPUs to save power when we underclock them, so there isn't really a point in throttling them until we are about to overheat. As such, the passive trip point is right below the critical trip point. The critical trip point is the extended/industrial-grade maximum junction temperature of 100C minus the maximum temperature sensor error of 3.5C (in the range -55C to 110C). Automotive- and military-grade parts can go up to 125C, but as far as I can tell there is no way to detect them at runtime. Userspace can adjust the trip points at runtime, but this may not be viable when booting above 100C. I think it's reasonable to ask automotive/military users to edit their device trees to bump the trip points, but if that proves to be an issue we can always go with no default temperatures. However, that wouldn't be too nice for the majority of extended/industrial users. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Link: https://lore.kernel.org/r/20240812215129.3599832-4-sean.anderson@linux.dev Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-10-02arm64: zynqmp: Expose AMS to userspace as HWMONSean Anderson
Expose the AMS to userspace, allowing monitoring of internal voltages and temperatures. For compatibility, we keep the node name the same as on the SM-K26, and we keep the ZCU100 Rev C. around (since it is named differently). Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Link: https://lore.kernel.org/r/20240812215129.3599832-3-sean.anderson@linux.dev Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-10-02arm64: zynqmp: Enable AMS for all boardsSean Anderson
The AMS does not rely on external hardware or features, so it can be enabled unconditionally. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Link: https://lore.kernel.org/r/20240812215129.3599832-2-sean.anderson@linux.dev Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-08-30arm64: zynqmp: Add PCIe phys property for ZCU102Sean Anderson
Add PCIe phy bindings for the ZCU102. Link: https://lore.kernel.org/r/20240531161337.864994-8-sean.anderson@linux.dev Tested-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com> Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michal Simek <michal.simek@amd.com>
2024-06-17arm64: zynqmp: Add pwm-fan node and fix ttc0 pwm-cells propertyVishal Patel
Add pwm-fan node to control fan through hwmon and change pwm-cells property to 3 to allow fancontrol utility to function correctly. Signed-off-by: Vishal Patel <vishal.patel@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/ff6b4dbfc9bb1b53769ffbf7d0e932c7a8be7c08.1716802450.git.michal.simek@amd.com
2024-06-17arm64: zynqmp: Add support for K26 rev2 boardsMichal Simek
Revision 2 is SW compatible with revision 1 but it is necessary to reflect it in model and compatible properties which are parsed by user space. Rev 2 has improved a power on boot reset and MIO34 shutdown glich improvement done via an additional filter in the GreenPak chip. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/458698666fdfcaaac70967d9f755422a480bed99.1716802450.git.michal.simek@amd.com
2024-06-17arm64: zynqmp: Describe DisplayPort connector for KriaVishal Sagar
Add a device tree node to describe the DisplayPort connector, and connect it to the DPSUB output. The patch was tested on kv260-revB/rev2. Signed-off-by: Vishal Sagar <vishal.sagar@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/4f69489c005719d280b8df97f3e82a5ce0cd9660.1716802450.git.michal.simek@amd.com
2024-06-17arm64: zynqmp: Add description for ina260 on kv260Michal Simek
The commit f7ab2d180e6a ("dt-bindings: hwmon: ina2xx: Describe ina260 chip"), commit f29996d0295e ("dt-bindings: hwmon: ina2xx: Describe #io-channel-cells property") and commit eea32fafadd3 ("dt-bindings: hwmon: ina2xx: Add label property") added description for ina260 that's why describe them on kv260 Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/944cba76ef5df932f1bebde6c5e64ec9d201356d.1716802450.git.michal.simek@amd.com
2024-06-17arm64: zynqmp: Add compatible string for kv260Michal Simek
The commit dbcd27526e6a ("dt-bindings: soc: xilinx: Add support for KV260 CC") added description for kv260 kit and it should be also reflected in DTs. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/1e436f82182a92187f3892401664db2507482870.1716802450.git.michal.simek@amd.com
2024-06-17arm64: zynqmp: Disable Tri-state for SDIOTejas Bhumkar
Since the zynqmp pinctrl driver now includes support for the tri-state registers, ensure that the pins needing output-enable are correctly configured for SOMs. Currently, there is an issue with the detection of the MMC for the SOM kv260, resulting in the following error: ZynqMP> mmc dev 1 Card did not respond to voltage select! : -110 To address this problem, configure the SDIO pins for output-enable to enable MMC detection. Signed-off-by: Tejas Bhumkar <tejas.arvind.bhumkar@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/540f83f7d88b80441c9fa3d771dd7b000b0710a4.1716802450.git.michal.simek@amd.com
2024-06-17arm64: zynqmp: Remove address/size-cells from ams nodeMichal Simek
Remove unused address/size-cells properties without defining child. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/39f73999bbec0233264ce40f05c0885c46e423be.1716802450.git.michal.simek@amd.com
2024-06-17arm64: zynqmp: Describe OCM controllerMichal Simek
Describe OCM controller which brings EDAC functionality. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/679736679fdf7897d68684295f6ed8256fb5f18e.1716802450.git.michal.simek@amd.com
2024-06-17arm64: zynqmp: Describe USB wakeup interruptMichal Simek
Describe usb wakeup interrupt. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/8c11ac7d73c822ee207cecd1445205f19fcaf004.1716802450.git.michal.simek@amd.com
2024-06-17arm64: zynqmp: Add missing description for efusesMichal Simek
The commit 737c0c8d07b5 ("nvmem: zynqmp_nvmem: Add support to access efuse") added support for efuses that's why also describe them in DT. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/beb8002f8dae47ce6f38f7f961d024e65372b654.1716802450.git.michal.simek@amd.com
2024-06-17arm64: zynqmp: Use fpga-region as node nameMichal Simek
Based on commit 85f838adad54 ("dt-bindings: fpga: Convert fpga-region binding to yaml") fpga/programmable logic should use fpga-region as node name that's why move to it. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/9133aed74a24ad5cd9af5a6d5aa7ee9a160f94ee.1716802450.git.michal.simek@amd.com
2024-06-17arm64: zynqmp: Align nvmem node with dt schemaMichal Simek
Use new soc-nvmem node name and swich to nvmem fixed layout. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/7796804c7c7dd8bb2c93bdfe028c22746a24fe54.1716802450.git.michal.simek@amd.com
2024-06-04arm64: zynqmp: Add coresight cpu debug supportSean Anderson
Add coresight debug support to the device tree. This can be useful when panicking, especially when a core is hung in EL3. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Link: https://lore.kernel.org/r/20240503153422.1958812-1-sean.anderson@linux.dev Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-05-27dts: zynqmp: add properties for TCM in remoteprocTanmay Shah
Add properties as per new bindings in zynqmp remoteproc node to represent TCM address and size. This patch also adds alternative remoteproc node to represent remoteproc cluster in split mode. By default lockstep mode is enabled and users should disable it before using split mode dts. Both device-tree nodes can't be used simultaneously one of them must be disabled. For zcu102-1.0 and zcu102-1.1 board remoteproc split mode dts node is enabled and lockstep mode dts is disabled. Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20240412183708.4036007-4-tanmay.shah@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-05-22Merge tag 'tty-6.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty/serial driver changes for 6.10-rc1. Included in here are: - Usual good set of api cleanups and evolution by Jiri Slaby to make the serial interfaces move out of the 1990's by using kfifos instead of hand-rolling their own logic. - 8250_exar driver updates - max3100 driver updates - sc16is7xx driver updates - exar driver updates - sh-sci driver updates - tty ldisc api addition to help refuse bindings - other smaller serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (113 commits) serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev() serial: imx: Raise TX trigger level to 8 serial: 8250_pnp: Simplify "line" related code serial: sh-sci: simplify locking when re-issuing RXDMA fails serial: sh-sci: let timeout timer only run when DMA is scheduled serial: sh-sci: describe locking requirements for invalidating RXDMA serial: sh-sci: protect invalidating RXDMA on shutdown tty: add the option to have a tty reject a new ldisc serial: core: Call device_set_awake_path() for console port dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema tty: serial: uartps: Add support for uartps controller reset arm64: zynqmp: Add resets property for UART nodes dt-bindings: serial: cdns,uart: Add optional reset property serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS() serial: 8250_exar: Keep the includes sorted serial: 8250_exar: Make type of bit the same in exar_ee_*_bit() serial: 8250_exar: Use BIT() in exar_ee_read() serial: 8250_exar: Switch to use dev_err_probe() serial: 8250_exar: Return directly from switch-cases serial: 8250_exar: Decrease indentation level ...
2024-05-04arm64: zynqmp: Add resets property for UART nodesManikanta Guntupalli
Add resets property for UART0 and UART1 nodes Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com> Link: https://lore.kernel.org/r/20240425062358.1347684-3-manikanta.guntupalli@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-29arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usageRob Herring
The "arm,armv8-pmuv3" compatible is intended only for s/w models. Primarily, it doesn't provide any detail on uarch specific events. There's still remaining cases for CPUs without any corresponding PMU definition and for big.LITTLE systems which only have a single PMU node (there should be one per core type). Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Bjorn Andersson <andersson@kernel.org> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Acked-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Link: https://lore.kernel.org/r/20240417203853.3212103-1-robh@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-01-22arm64: zynqmp: Align usb clock nodes with bindingMichal Simek
dwc3-xilinx.yaml defines 2 clocks which are not defined that's why define them (bus_early clock is moved to bus_clk in glue logic). With also describing kv260 assigned clock rates with assigned clocks. Also add missing status property to standard dwc3 core. Link: https://lore.kernel.org/r/aa4c65a8997c7a65f23da3a3088bb5eb64281307.1704728353.git.michal.simek@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-01-22arm64: zynqmp: Comment all smmu entriesMichal Simek
SMMU is disabled by default and not all masters can be enabled at the same time because of limited number of entries. That's why comment all iommu properties but keep them for reference in DT. In XEN case they should be added back and Xen should have SMMU enabled by default. Also add IDs for DP and DPDMA. Link: https://lore.kernel.org/r/bdb012b1c86abb0d9aa88954196d886d1283e9b1.1704728353.git.michal.simek@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-01-22arm64: zynqmp: Rename i2c?-gpio to i2c?-gpio-grpMichal Simek
Anything ending with gpio/gpios is taken as gpio phande/description which is reported as the issue coming from gpio-consumer.yaml schema. That's why rename the gpio suffix to gpio-grp to avoid name collision. Link: https://lore.kernel.org/r/94f633e26b7b16cabddb8c7210c2e79208c364da.1704728353.git.michal.simek@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-01-22arm64: zynqmp: Disable Tri-state for MIO38 PinTejas Bhumkar
gpio38 is used in SOM's kv260 to reset the Ethernet PHY. At present, HW reset is not working properly as Tri-state  is enabled for MIO38, causing inappropriate PHY register reads. Disabled Tri-state for MIO38 to make HW reset work. Tri-state disable : ZynqMP> md 0xFF180208 2 ff180208: 00bfe7a3 00000540 Tri-state enable : ZynqMP> md 0xFF180208 2 ff180208: 00bfe7e3 00000540 Signed-off-by: Tejas Bhumkar <tejas.arvind.bhumkar@amd.com> Link: https://lore.kernel.org/r/9f8a0687be407a8ffad610087074e94ebc4f5982.1704728353.git.michal.simek@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-01-22arm64: zynqmp: Remove incorrect comment from kv260sMichal Simek
Remove incorrect comment about required nodes by spec. In past gem3 was the part of SOM specification but it has been revisit by introducting KR260. Link: https://lore.kernel.org/r/0bd166345ce78097a1ff8d4307545f5026c92267.1704728353.git.michal.simek@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-01-22arm64: zynqmp: Introduce u-boot options node with bootscr-addressMichal Simek
Add u-boot options node with details about bootscr-address. c&p description from dtschema/schemas/options/u-boot.yaml: "Holds the full address of the boot script file. It helps in making automated flow easier by fetching the 64bit address directly from DT. Value should be automatically copied to the U-Boot 'scriptaddr' variable. When it is defined, bootscr-ram-offset property should be ignored. Actually only one of them should be present in the DT." Address is generic for all zynqmp boards because all of them have DDR starting from 0. Custom boards should revisit the location and aligned it based on their needs. Link: https://lore.kernel.org/r/4f5978d5a26fe0cd0cc6e54a97da1517bb925c01.1704728353.git.michal.simek@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-01-22arm64: zynqmp: Fix comment to be aligned with board name.Michal Simek
The board was renamed from zc1275 to zcu1275 but name in comment wasn't updated. Fixes: 370b0e900fb0 ("arm64: zynqmp: Change zc1275 board name to zcu1275") Link: https://lore.kernel.org/r/6e4215807f535d2e2b2b8055aa8574c748fe22e4.1704728353.git.michal.simek@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-01-22arm64: zynqmp: Update ECAM size to discover up to 256 busesThippeswamy Havalige
Update ECAM size to discover up to 256 buses. Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com> Link: https://lore.kernel.org/r/4f7621a790f4aa35b3e7f74683d3ae4ffe820667.1704728353.git.michal.simek@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-01-22arm64: zynqmp: Describe assigned-clocks for uartsMichal Simek
Describe assigned-clocks for both uarts. SOM is using this functionality. Link: https://lore.kernel.org/r/21579f273554a19bc95a40f49956793b5261627f.1704728353.git.michal.simek@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-01-22arm64: zynqmp: Setup default si570 frequency to 156.25MHzMichal Simek
All si570 mgt chips have factory default 156.25MHz but DT changed it to 148.5MHz. After tracking it is pretty much c&p fault taken from Zynq zc702/zc706 boards where 148.5MHz was setup as default because it was requirement for AD7511 chip available on these boards. ZynqMP board don't contain this chip that's why factory default frequency can be used. Link: https://lore.kernel.org/r/65a53776cbc5e4586f58da57a4b99e4d5c6c26a7.1704728353.git.michal.simek@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-01-22arm64: zynqmp: Add resets property for CAN nodesSrinivas Neeli
Added resets property for CAN nodes. Signed-off-by: Srinivas Neeli <srinivas.neeli@amd.com> Link: https://lore.kernel.org/r/7bf0cc230f3c25010f9545f3f92f6f15a95d21ec.1704728353.git.michal.simek@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-01-22arm64: zynqmp: Add an OP-TEE node to the device treeIlias Apalodimas
Since the zynqmp boards can run upstream OP-TEE, and having the DT node present doesn't cause any side effects add it in case someone tries to load OP-TEE. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://lore.kernel.org/r/9ee7e8c263c453a8c9e6bc3b91fad78b0f54edc0.1704728353.git.michal.simek@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-01-22arm64: zynqmp: Add output-enable pins to SOMsNeal Frager
Now that the zynqmp pinctrl driver supports the tri-state registers, make sure that the pins requiring output-enable are configured appropriately for SOMs. Without it, all tristate setting for MIOs, which are not related to SOM itself, are using default configuration which is not correct setting. It means SDs, USBs, ethernet, etc. are not working properly. In past it was fixed through calling tristate configuration via bootcmd: usb_init=mw 0xFF180208 2020 kv260_gem3=mw 0xFF18020C 0xFC0 && gpio toggle gpio@ff0a000038 && \ gpio toggle gpio@ff0a000038 Signed-off-by: Neal Frager <neal.frager@amd.com> Link: https://lore.kernel.org/r/9270938b48c8939ac5dca4ac2c59f1c4a8c564d8.1704728353.git.michal.simek@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2024-01-22arm64: zynqmp: Rename zynqmp-power node to power-managementMichal Simek
Rename zynqmp-power node name to power-management which is more aligned with generic node name recommendation. Link: https://lore.kernel.org/r/bf24cde92c2b9e2824847687fab69fc25c533d53.1703161663.git.michal.simek@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-12-13arm64: zynqmp: Add missing destination mailbox compatibleMichal Simek
The commit 81186dc16101 ("dt-bindings: zynqmp: add destination mailbox compatible") make compatible string for child nodes mandatory that's why add it. Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-12-13arm64: zynqmp: Fix clock node name in kv260 cardsMichal Simek
node name shouldn't use '_' that's why convert it to '-'. Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-12-13arm64: zynqmp: Move fixed clock to / for kv260Michal Simek
fixed clock nodes can't be on the bus because they are missing reg property. That's why move them to root. And because it is root it is good to have it as the first node in a file. Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-12-13arm64: xilinx: Remove address/size-cells from gem nodesMichal Simek
Some boards are using one mdio bus which holds multiple phys and also boards are using mdio node for bus description. That's why there are cases where address/size-cells are unnecessary which is also reported by make W=1 dtbs. That's why remove them from zynqmp.dtsi and let board DTSes to handle it based on used description. Error log: /axi/ethernet@ff0e0000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/7252203d52af3ca8867764c8514affc4828e530d.1695040866.git.michal.simek@amd.com
2023-12-13arm64: xilinx: Remove address/size-cells from flash nodeMichal Simek
Partitions are described via fixed-partitions that's why there is no need to have address/size-cells in flash node. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/c4447028f914e77b8c28640dc458b8409198ee30.1695040866.git.michal.simek@amd.com
2023-12-13arm64: xilinx: Put ethernet phys to mdio nodeMichal Simek
All zynqmp boards have been already described via mdio node that's why also convert zc1751. With using mdio node there is an option to add reset property for the whole mdio bus. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/dc228a27579b48f3e768fcb439d118b4a0f0ef5b.1695040866.git.michal.simek@amd.com
2023-12-13arm64: xilinx: Remove mt25qu512a compatible string from SOMMichal Simek
mt25qu512a is not documented in DT binding that's why remove it. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/a1e975f5785dfb6eb04e8d5905dcaa7467ccd585.1695040866.git.michal.simek@amd.com
2023-12-13arm64: xilinx: Use lower case for partition addressMichal Simek
Lower case should be used for register address. Issue is reported as: flash@0: partitions: Unevaluated properties are not allowed ('partition@22A0000' was unexpected) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/a96ac9a32a363b04958157548f290d480c21590c.1695040866.git.michal.simek@amd.com
2023-12-13arm64: xilinx: Do not use '_' in DT node namesMichal Simek
Character '_' not recommended in node name. Use '-' instead. Pretty much run seds below for node names. s/zynqmp_ipi/zynqmp-ipi/ s/nvmem_firmware/nvmem-firmware/ s/soc_revision/soc-revision/ s/si5335_/si5335-/ Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/5137958580c85a35cf6aadd1c33a2f6bcf81a9e5.1695040866.git.michal.simek@amd.com
2023-12-13arm64: dts: xilinx: Apply overlays to base dtbsRob Herring
DT overlays in tree need to be applied to a base DTB to validate they apply, to run schema checks on them, and to catch any errors at compile time. Defining the "-dtbs" variable is not enough as the combined DT must be added to dtbs-y. zynqmp-sck-kr-g-revA.dtso and zynqmp-sck-kr-g-revB.dtso don't exist, so drop them. Signed-off-by: Rob Herring <robh@kernel.org> Fixes: 45fe0dc4ea2e ("arm64: xilinx: Use zynqmp prefix for SOM dt overlays") Link: https://lore.kernel.org/r/20230911214751.2202913-1-robh@kernel.org Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-07-27arm64: zynqmp: Describe interrupts by using macrosMichal Simek
Use arm-gic.h and irq.h for interrupt description. It helps to improve readability of device tree file. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/9d5bd17f37772be186cab17b06cc21351d36ff62.1688986332.git.michal.simek@amd.com
generated by cgit (git 2.34.1) at 2025-07-16 15:35:30 +0000