| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of
creating a pte which addresses the first page in a folio and reduces
the amount of plumbing which architecture must implement to provide
this.
- "Misc folio patches for 6.16" from Matthew Wilcox is a shower of
largely unrelated folio infrastructure changes which clean things up
and better prepare us for future work.
- "memory,x86,acpi: hotplug memory alignment advisement" from Gregory
Price adds early-init code to prevent x86 from leaving physical
memory unused when physical address regions are not aligned to memory
block size.
- "mm/compaction: allow more aggressive proactive compaction" from
Michal Clapinski provides some tuning of the (sadly, hard-coded (more
sadly, not auto-tuned)) thresholds for our invokation of proactive
compaction. In a simple test case, the reduction of a guest VM's
memory consumption was dramatic.
- "Minor cleanups and improvements to swap freeing code" from Kemeng
Shi provides some code cleaups and a small efficiency improvement to
this part of our swap handling code.
- "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin
adds the ability for a ptracer to modify syscalls arguments. At this
time we can alter only "system call information that are used by
strace system call tampering, namely, syscall number, syscall
arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from
Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl
against /proc/pid/pagemap. This permits CRIU to more efficiently get
at the info about guard regions.
- "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan
implements that fix. No runtime effect is expected because
validate_page_before_insert() happens to fix up this error.
- "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David
Hildenbrand basically brings uprobe text poking into the current
decade. Remove a bunch of hand-rolled implementation in favor of
using more current facilities.
- "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman
Khandual provides enhancements and generalizations to the pte dumping
code. This might be needed when 128-bit Page Table Descriptors are
enabled for ARM.
- "Always call constructor for kernel page tables" from Kevin Brodsky
ensures that the ctor/dtor is always called for kernel pgtables, as
it already is for user pgtables.
This permits the addition of more functionality such as "insert hooks
to protect page tables". This change does result in various
architectures performing unnecesary work, but this is fixed up where
it is anticipated to occur.
- "Rust support for mm_struct, vm_area_struct, and mmap" from Alice
Ryhl adds plumbing to permit Rust access to core MM structures.
- "fix incorrectly disallowed anonymous VMA merges" from Lorenzo
Stoakes takes advantage of some VMA merging opportunities which we've
been missing for 15 years.
- "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from
SeongJae Park optimizes process_madvise()'s TLB flushing.
Instead of flushing each address range in the provided iovec, we
batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- "Track node vacancy to reduce worst case allocation counts" from
Sidhartha Kumar makes the maple tree smarter about its node
preallocation.
stress-ng mmap performance increased by single-digit percentages and
the amount of unnecessarily preallocated memory was dramaticelly
reduced.
- "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes
a few unnecessary things which Baoquan noted when reading the code.
- ""Enhance sysfs handling for memory hotplug in weighted interleave"
from Rakie Kim "enhances the weighted interleave policy in the memory
management subsystem by improving sysfs handling, fixing memory
leaks, and introducing dynamic sysfs updates for memory hotplug
support". Fixes things on error paths which we are unlikely to hit.
- "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory"
from SeongJae Park introduces new DAMOS quota goal metrics which
eliminate the manual tuning which is required when utilizing DAMON
for memory tiering.
- "mm/vmalloc.c: code cleanup and improvements" from Baoquan He
provides cleanups and small efficiency improvements which Baoquan
found via code inspection.
- "vmscan: enforce mems_effective during demotion" from Gregory Price
changes reclaim to respect cpuset.mems_effective during demotion when
possible. because presently, reclaim explicitly ignores
cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated.
This is useful for isolating workloads on a multi-tenant system from
certain classes of memory more consistently.
- "Clean up split_huge_pmd_locked() and remove unnecessary folio
pointers" from Gavin Guo provides minor cleanups and efficiency gains
in in the huge page splitting and migrating code.
- "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache
for `struct mem_cgroup', yielding improved memory utilization.
- "add max arg to swappiness in memory.reclaim and lru_gen" from
Zhongkun He adds a new "max" argument to the "swappiness=" argument
for memory.reclaim MGLRU's lru_gen.
This directs proactive reclaim to reclaim from only anon folios
rather than file-backed folios.
- "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the
first step on the path to permitting the kernel to maintain existing
VMs while replacing the host kernel via file-based kexec. At this
time only memblock's reserve_mem is preserved.
- "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides
and uses a smarter way of looping over a pfn range. By skipping
ranges of invalid pfns.
- "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via
cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning
when a task is pinned a single NUMA mode.
Dramatic performance benefits were seen in some real world cases.
- "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank
Garg addresses a warning which occurs during memory compaction when
using JFS.
- "move all VMA allocation, freeing and duplication logic to mm" from
Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more
appropriate mm/vma.c.
- "mm, swap: clean up swap cache mapping helper" from Kairui Song
provides code consolidation and cleanups related to the folio_index()
function.
- "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that.
- "memcg: Fix test_memcg_min/low test failures" from Waiman Long
addresses some bogus failures which are being reported by the
test_memcontrol selftest.
- "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo
Stoakes commences the deprecation of file_operations.mmap() in favor
of the new file_operations.mmap_prepare().
The latter is more restrictive and prevents drivers from messing with
things in ways which, amongst other problems, may defeat VMA merging.
- "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples
the per-cpu memcg charge cache from the objcg's one.
This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- "mm/damon: minor fixups and improvements for code, tests, and
documents" from SeongJae Park is yet another batch of miscellaneous
DAMON changes. Fix and improve minor problems in code, tests and
documents.
- "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg
stats to be irq safe. Another step along the way to making memcg
charging and stats updates NMI-safe, a BPF requirement.
- "Let unmap_hugepage_range() and several related functions take folio
instead of page" from Fan Ni provides folio conversions in the
hugetlb code.
* tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits)
mm: pcp: increase pcp->free_count threshold to trigger free_high
mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range()
mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page
mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page
mm/hugetlb: pass folio instead of page to unmap_ref_private()
memcg: objcg stock trylock without irq disabling
memcg: no stock lock for cpu hot-unplug
memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs
memcg: make count_memcg_events re-entrant safe against irqs
memcg: make mod_memcg_state re-entrant safe against irqs
memcg: move preempt disable to callers of memcg_rstat_updated
memcg: memcg_rstat_updated re-entrant safe against irqs
mm: khugepaged: decouple SHMEM and file folios' collapse
selftests/eventfd: correct test name and improve messages
alloc_tag: check mem_profiling_support in alloc_tag_init
Docs/damon: update titles and brief introductions to explain DAMOS
selftests/damon/_damon_sysfs: read tried regions directories in order
mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject()
mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat()
mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull coredump updates from Christian Brauner:
"This adds support for sending coredumps over an AF_UNIX socket. It
also makes (implicit) use of the new SO_PEERPIDFD ability to hand out
pidfds for reaped peer tasks
The new coredump socket will allow userspace to not have to rely on
usermode helpers for processing coredumps and provides a saf way to
handle them instead of relying on super privileged coredumping helpers
This will also be significantly more lightweight since the kernel
doens't have to do a fork()+exec() for each crashing process to spawn
a usermodehelper. Instead the kernel just connects to the AF_UNIX
socket and userspace can process it concurrently however it sees fit.
Support for userspace is incoming starting with systemd-coredump
There's more work coming in that direction next cycle. The rest below
goes into some details and background
Coredumping currently supports two modes:
(1) Dumping directly into a file somewhere on the filesystem.
(2) Dumping into a pipe connected to a usermode helper process
spawned as a child of the system_unbound_wq or kthreadd
For simplicity I'm mostly ignoring (1). There's probably still some
users of (1) out there but processing coredumps in this way can be
considered adventurous especially in the face of set*id binaries
The most common option should be (2) by now. It works by allowing
userspace to put a string into /proc/sys/kernel/core_pattern like:
|/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %h
The "|" at the beginning indicates to the kernel that a pipe must be
used. The path following the pipe indicator is a path to a binary that
will be spawned as a usermode helper process. Any additional
parameters pass information about the task that is generating the
coredump to the binary that processes the coredump
In the example the core_pattern shown causes the kernel to spawn
systemd-coredump as a usermode helper. There's various conceptual
consequences of this (non-exhaustive list):
- systemd-coredump is spawned with file descriptor number 0 (stdin)
connected to the read-end of the pipe. All other file descriptors
are closed. That specifically includes 1 (stdout) and 2 (stderr).
This has already caused bugs because userspace assumed that this
cannot happen (Whether or not this is a sane assumption is
irrelevant)
- systemd-coredump will be spawned as a child of system_unbound_wq.
So it is not a child of any userspace process and specifically not
a child of PID 1. It cannot be waited upon and is in a weird hybrid
upcall which are difficult for userspace to control correctly
- systemd-coredump is spawned with full kernel privileges. This
necessitates all kinds of weird privilege dropping excercises in
userspace to make this safe
- A new usermode helper has to be spawned for each crashing process
This adds a new mode:
(3) Dumping into an AF_UNIX socket
Userspace can set /proc/sys/kernel/core_pattern to:
@/path/to/coredump.socket
The "@" at the beginning indicates to the kernel that an AF_UNIX
coredump socket will be used to process coredumps
The coredump socket must be located in the initial mount namespace.
When a task coredumps it opens a client socket in the initial network
namespace and connects to the coredump socket:
- The coredump server uses SO_PEERPIDFD to get a stable handle on the
connected crashing task. The retrieved pidfd will provide a stable
reference even if the crashing task gets SIGKILLed while generating
the coredump. That is a huge attack vector right now
- By setting core_pipe_limit non-zero userspace can guarantee that
the crashing task cannot be reaped behind it's back and thus
process all necessary information in /proc/<pid>. The SO_PEERPIDFD
can be used to detect whether /proc/<pid> still refers to the same
process
The core_pipe_limit isn't used to rate-limit connections to the
socket. This can simply be done via AF_UNIX socket directly
- The pidfd for the crashing task will contain information how the
task coredumps. The PIDFD_GET_INFO ioctl gained a new flag
PIDFD_INFO_COREDUMP which can be used to retreive the coredump
information
If the coredump gets a new coredump client connection the kernel
guarantees that PIDFD_INFO_COREDUMP information is available.
Currently the following information is provided in the new
@coredump_mask extension to struct pidfd_info:
* PIDFD_COREDUMPED is raised if the task did actually coredump
* PIDFD_COREDUMP_SKIP is raised if the task skipped coredumping
(e.g., undumpable)
* PIDFD_COREDUMP_USER is raised if this is a regular coredump and
doesn't need special care by the coredump server
* PIDFD_COREDUMP_ROOT is raised if the generated coredump should
be treated as sensitive and the coredump server should restrict
access to the generated coredump to sufficiently privileged
users"
* tag 'vfs-6.16-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
mips, net: ensure that SOCK_COREDUMP is defined
selftests/coredump: add tests for AF_UNIX coredumps
selftests/pidfd: add PIDFD_INFO_COREDUMP infrastructure
coredump: validate socket name as it is written
coredump: show supported coredump modes
pidfs, coredump: add PIDFD_INFO_COREDUMP
coredump: add coredump socket
coredump: reflow dump helpers a little
coredump: massage do_coredump()
coredump: massage format_corename()
|
|
As long as recvmsg() or recvmmsg() is used with cmsg, it is not
possible to avoid receiving file descriptors via SCM_RIGHTS.
This behaviour has occasionally been flagged as problematic, as
it can be (ab)used to trigger DoS during close(), for example, by
passing a FUSE-controlled fd or a hung NFS fd.
For instance, as noted on the uAPI Group page [0], an untrusted peer
could send a file descriptor pointing to a hung NFS mount and then
close it. Once the receiver calls recvmsg() with msg_control, the
descriptor is automatically installed, and then the responsibility
for the final close() now falls on the receiver, which may result
in blocking the process for a long time.
Regarding this, systemd calls cmsg_close_all() [1] after each
recvmsg() to close() unwanted file descriptors sent via SCM_RIGHTS.
However, this cannot work around the issue at all, because the final
fput() may still occur on the receiver's side once sendmsg() with
SCM_RIGHTS succeeds. Also, even filtering by LSM at recvmsg() does
not work for the same reason.
Thus, we need a better way to refuse SCM_RIGHTS at sendmsg().
Let's introduce SO_PASSRIGHTS to disable SCM_RIGHTS.
Note that this option is enabled by default for backward
compatibility.
Link: https://uapi-group.org/kernel-features/#disabling-reception-of-scm_rights-for-af_unix-sockets #[0]
Link: https://github.com/systemd/systemd/blob/v257.5/src/basic/fd-util.c#L612-L628 #[1]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For historical reasons mips has to override the socket enum values but
the defines are all the same. So simply move the ARCH_HAS_SOCKET_TYPES
scope.
Fixes: a9194f88782a ("coredump: add coredump socket")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Patch series "Always call constructor for kernel page tables", v2.
There has been much confusion around exactly when page table
constructors/destructors (pagetable_*_[cd]tor) are supposed to be called.
They were initially introduced for user PTEs only (to support split page
table locks), then at the PMD level for the same purpose. Accounting was
added later on, starting at the PTE level and then moving to higher levels
(PMD, PUD). Finally, with my earlier series "Account page tables at all
levels" [1], the ctor/dtor is run for all levels, all the way to PGD.
I thought this was the end of the story, and it hopefully is for user
pgtables, but I was wrong for what concerns kernel pgtables. The current
situation there makes very little sense:
* At the PTE level, the ctor/dtor is not called (at least in the generic
implementation). Specific helpers are used for kernel pgtables at this
level (pte_{alloc,free}_kernel()) and those have never called the
ctor/dtor, most likely because they were initially irrelevant in the
kernel case.
* At all other levels, the ctor/dtor is normally called. This is
potentially wasteful at the PMD level (more on that later).
This series aims to ensure that the ctor/dtor is always called for kernel
pgtables, as it already is for user pgtables. Besides consistency, the
main motivation is to guarantee that ctor/dtor hooks are systematically
called; this makes it possible to insert hooks to protect page tables [2],
for instance. There is however an extra challenge: split locks are not
used for kernel pgtables, and it would therefore be wasteful to initialise
them (ptlock_init()).
It is worth clarifying exactly when split locks are used. They clearly
are for user pgtables, but as illustrated in commit 61444cde9170 ("ARM:
8591/1: mm: use fully constructed struct pages for EFI pgd allocations"),
they also are for special page tables like efi_mm. The one case where
split locks are definitely unused is pgtables owned by init_mm; this is
consistent with the behaviour of apply_to_pte_range().
The approach chosen in this series is therefore to pass the mm associated
to the pgtables being constructed to pagetable_{pte,pmd}_ctor() (patch 1),
and skip ptlock_init() if mm == &init_mm (patch 3 and 7). This makes it
possible to call the PTE ctor/dtor from pte_{alloc,free}_kernel() without
unintended consequences (patch 3). As a result the accounting functions
are now called at all levels for kernel pgtables, and split locks are
never initialised.
In configurations where ptlocks are dynamically allocated (32-bit,
PREEMPT_RT, etc.) and ARCH_ENABLE_SPLIT_PMD_PTLOCK is selected, this
series results in the removal of a kmem_cache allocation for every kernel
PMD. Additionally, for certain architectures that do not use
<asm-generic/pgalloc.h> such as s390, the same optimisation occurs at the
PTE level.
===
Things get more complicated when it comes to special pgtable allocators
(patch 8-12). All architectures need such allocators to create initial
kernel pgtables; we are not concerned with those as the ctor cannot be
called so early in the boot sequence. However, those allocators may also
be used later in the boot sequence or during normal operations. There are
two main use-cases:
1. Mapping EFI memory: efi_mm (arm, arm64, riscv)
2. arch_add_memory(): init_mm
The ctor is already explicitly run (at the PTE/PMD level) in the first
case, as required for pgtables that are not associated with init_mm.
However the same allocators may also be used for the second use-case (or
others), and this is where it gets messy. Patch 1 calls the ctor with
NULL as mm in those situations, as the actual mm isn't available.
Practically this means that ptlocks will be unconditionally initialised.
This is fine on arm - create_mapping_late() is only used for the EFI
mapping. On arm64, __create_pgd_mapping() is also used by
arch_add_memory(); patch 8/9/11 ensure that ctors are called at all levels
with the appropriate mm. The situation is similar on riscv, but
propagating the mm down to the ctor would require significant refactoring.
Since they are already called unconditionally, this series leaves riscv
no worse off - patch 10 adds comments to clarify the situation.
From a cursory look at other architectures implementing arch_add_memory(),
s390 and x86 may also need a similar treatment to add constructor calls.
This is to be taken care of in a future version or as a follow-up.
===
The complications in those special pgtable allocators beg the question:
does it really make sense to treat efi_mm and init_mm differently in e.g.
apply_to_pte_range()? Maybe what we really need is a way to tell if an mm
corresponds to user memory or not, and never use split locks for non-user
mm's. Feedback and suggestions welcome!
This patch (of 12):
In preparation for calling constructors for all kernel page tables while
eliding unnecessary ptlock initialisation, let's pass down the associated
mm to the PTE/PMD level ctors. (These are the two levels where ptlocks
are used.)
In most cases the mm is already around at the point of calling the ctor so
we simply pass it down. This is however not the case for special page
table allocators:
* arch/arm/mm/mmu.c
* arch/arm64/mm/mmu.c
* arch/riscv/mm/init.c
In those cases, the page tables being allocated are either for standard
kernel memory (init_mm) or special page directories, which may not be
associated to any mm. For now let's pass NULL as mm; this will be refined
where possible in future patches.
No functional change in this patch.
Link: https://lore.kernel.org/linux-mm/20250103184415.2744423-1-kevin.brodsky@arm.com/ [1]
Link: https://lore.kernel.org/linux-hardening/20250203101839.1223008-1-kevin.brodsky@arm.com/ [2]
Link: https://lkml.kernel.org/r/20250408095222.860601-1-kevin.brodsky@arm.com
Link: https://lkml.kernel.org/r/20250408095222.860601-2-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: <x86@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Similar to syscall_set_arguments() that complements
syscall_get_arguments(), introduce syscall_set_nr() that complements
syscall_get_nr().
syscall_set_nr() is going to be needed along with syscall_set_arguments()
on all HAVE_ARCH_TRACEHOOK architectures to implement
PTRACE_SET_SYSCALL_INFO API.
Link: https://lkml.kernel.org/r/20250303112020.GD24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> # mips
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This function is going to be needed on all HAVE_ARCH_TRACEHOOK
architectures to implement PTRACE_SET_SYSCALL_INFO API.
This partially reverts commit 7962c2eddbfe ("arch: remove unused function
syscall_set_arguments()") by reusing some of old syscall_set_arguments()
implementations.
[nathan@kernel.org: fix compile time fortify checks]
Link: https://lkml.kernel.org/r/20250408213131.GA2872426@ax162
Link: https://lkml.kernel.org/r/20250303112009.GC24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> [mips]
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are now no callers of mk_huge_pmd() and mk_pmd(). Remove them.
Link: https://lkml.kernel.org/r/20250402181709.2386022-12-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Most architectures simply call pfn_pte(). Centralise that as the normal
definition and remove the definition of mk_pte() from the architectures
which have either that exact definition or something similar.
Link: https://lkml.kernel.org/r/20250402181709.2386022-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390
Cc: Zi Yan <ziy@nvidia.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix MAX_REG_OFFSET to point to the last register in 'pt_regs' and not to
the marker itself, which could allow regs_get_register() to return an
invalid offset.
Fixes: 40e084a506eb ("MIPS: Add uprobes support.")
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Recently the rollback region has been changed into an
idle interrupt region [1]. This patch make the appropriate
changes renaming functions and macro, to reflect the change.
[1] https://lore.kernel.org/linux-mips/20250403161143.361461-2-marco.crivellari@suse.com/
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
MIPS re-enables interrupts on its idle routine and performs
a TIF_NEED_RESCHED check afterwards before putting the CPU to sleep.
The IRQs firing between the check and the 'wait' instruction may set the
TIF_NEED_RESCHED flag. In order to deal with this possible race, IRQs
interrupting __r4k_wait() rollback their return address to the
beginning of __r4k_wait() so that TIF_NEED_RESCHED is checked
again before going back to sleep.
However idle IRQs can also queue timers that may require a tick
reprogramming through a new generic idle loop iteration but those timers
would go unnoticed here because __r4k_wait() only checks
TIF_NEED_RESCHED. It doesn't check for pending timers.
Fix this with fast-forwarding idle IRQs return address to the end of the
idle routine instead of the beginning, so that the generic idle loop
handles both TIF_NEED_RESCHED and pending timers.
CONFIG_CPU_MICROMIPS has been removed along with the nop instructions.
There, NOPs are 2 byte in size, so change the code with 3 _ssnop which are
always 4 byte and remove the ifdef. Added ehb to make sure the hazard
is always cleared.
Fixes: c65a5480ff29 ("[MIPS] Fix potential latency problem due to non-atomic cpu_wait.")
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Now, the nine architectures of csky, hexagon, loongarch, m68k, mips,
nios2, openrisc, sh and um do not select CONFIG_MMU_GATHER_RCU_TABLE_FREE,
and just call pagetable_dtor() + tlb_remove_page_ptdesc() (the wrapper of
tlb_remove_page()). This is the same as the implementation of
tlb_remove_{ptdesc|table}() under !CONFIG_MMU_GATHER_TABLE_FREE, so
convert these architectures to use tlb_remove_ptdesc().
The ultimate goal is to make the architecture only use tlb_remove_ptdesc()
or tlb_remove_table() for page table pages.
[zhengqi.arch@bytedance.com: v2]
Link: https://lkml.kernel.org/r/20250303072603.45423-1-zhengqi.arch@bytedance.com
[akpm@linux-foundation.org: remove trailing semi in arch/loongarch/include/asm/pgalloc.h]
Link: https://lkml.kernel.org/r/19db3e8673b67bad2f1df1ab37f1c89d99eacfea.1740454179.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- Add support for multi-cluster configuration
- Add quirks for enabling multi-cluster mode on EyeQ6
- Add DTS clocks for ralink
- Cleanup realtek DTS
- Other cleanups and fixes
* tag 'mips_6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (35 commits)
MIPS: config: omega2+, vocore2: enable CLK_MTMIPS
arch: mips: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
MIPS: cm: Fix warning if MIPS_CM is disabled
MIPS: Fix Macro name
MIPS: ds1287: Match ds1287_set_base_clock() function types
MIPS: cevt-ds1287: Add missing ds1287.h include
MIPS: dec: Declare which_prom() as static
MIPS: Loongson2ef: Replace deprecated strncpy() with strscpy()
mips: dts: ralink: mt7628a: update system controller node and its consumers
mips: dts: ralink: mt7620a: update system controller node and its consumers
mips: dts: ralink: rt3883: update system controller node and its consumers
mips: dts: ralink: rt3050: update system controller node and its consumers
mips: dts: ralink: rt2880: update system controller node and its consumers
dt-bindings: clock: add clock definitions for Ralink SoCs
MIPS: Use arch specific syscall name match function
mips: dts: realtek: Add restart to Cisco SG220-26P
mips: dts: realtek: Add RTL838x SoC peripherals
mips: dts: realtek: Replace uart clock property
mips: dts: realtek: Correct uart interrupt-parent
mips: dts: realtek: Add SoC IRQ node for RTL838x
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"This is mainly set of cleanups of asm-generic/io.h, resolving problems
with inconsistent semantics of ioread64/iowrite64 that were causing
runtime and build issues.
The "GENERIC_IOMAP" version that switches between inb()/outb() and
readb()/writeb() style accessors is now only used on architectures
that have PC-style ISA devices that are not memory mapped (x86, uml,
m68k-q40 and powerpc-powernv), while alpha and parisc use a more
complicated variant and everything else just maps the ioread
interfaces to plan MMIO (readb/writeb etc).
In addition there are two small changes from Raag Jadav to simplify
the asm-generic/io.h indirect inclusions and from Jann Horn to fix a
corner case with read_word_at_a_time"
* tag 'asm-generic-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
rwonce: fix crash by removing READ_ONCE() for unaligned read
rwonce: handle KCSAN like KASAN in read_word_at_a_time()
m68k: coldfire: select PCI_IOMAP for PCI
mips: export pci_iounmap()
mips: fix PCI_IOBASE definition
m68k/nommu: stop using GENERIC_IOMAP
mips: drop GENERIC_IOMAP wrapper
powerpc: asm/io.h: remove split ioread64/iowrite64 helpers
parisc: stop using asm-generic/iomap.h
sh: remove duplicate ioread/iowrite helpers
alpha: stop using asm-generic/iomap.h
io.h: drop unused headers
drm/draw: include missing headers
asm-generic/io.h: rework split ioread64/iowrite64 helpers
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO infrastructure updates from Thomas Gleixner:
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance
effort and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts
and implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system
timekeeping accessors, which was good enough at the time when it was
designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related
to system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
* tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
sparc/vdso: Always reject undefined references during linking
x86/vdso: Always reject undefined references during linking
vdso: Rework struct vdso_time_data and introduce struct vdso_clock
vdso: Move architecture related data before basetime data
powerpc/vdso: Prepare introduction of struct vdso_clock
arm64/vdso: Prepare introduction of struct vdso_clock
x86/vdso: Prepare introduction of struct vdso_clock
time/namespace: Prepare introduction of struct vdso_clock
vdso/namespace: Rename timens_setup_vdso_data() to reflect new vdso_clock struct
vdso/vsyscall: Prepare introduction of struct vdso_clock
vdso/gettimeofday: Prepare helper functions for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare introduction of struct vdso_clock
vdso/helpers: Prepare introduction of struct vdso_clock
vdso/datapage: Define vdso_clock to prepare for multiple PTP clocks
vdso: Make vdso_time_data cacheline aligned
arm64: Make asm/cache.h compatible with vDSO
...
|
|
The immediate issue being fixed here is a nVMX bug where KVM fails to
detect that, after nested VM-Exit, L1 has a pending IRQ (or NMI).
However, checking for a pending interrupt accesses the legacy PIC, and
x86's kvm_arch_destroy_vm() currently frees the PIC before destroying
vCPUs, i.e. checking for IRQs during the forced nested VM-Exit results
in a NULL pointer deref; that's a prerequisite for the nVMX fix.
The remaining patches attempt to bring a bit of sanity to x86's VM
teardown code, which has accumulated a lot of cruft over the years. E.g.
KVM currently unloads each vCPU's MMUs in a separate operation from
destroying vCPUs, all because when guest SMP support was added, KVM had a
kludgy MMU teardown flow that broke when a VM had more than one 1 vCPU.
And that oddity lived on, for 18 years...
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit e27fbe16af5c ("MIPS: cm: Detect CM quirks from device tree")
introduced
arch/mips/include/asm/mips-cm.h:119:13: error: ‘mips_cm_update_property’
defined but not used [-Werror=unused-function]
Fix this by making empty function implementation inline
Fixes: e27fbe16af5c ("MIPS: cm: Detect CM quirks from device tree")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add missing underscore in PCI_CFGA_BUS macro definition for consistency.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219744
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
After my previous patch, the ioport_map() function changed from
the lib/iomap.c version to the asm-generic/io.h version, which
requires a correct PCI_IOBASE definition.
Unfortunately the types are also different, so add the correct
definition for ioport_map() in asm/io.h and change the machine
specific ones to have the correct type.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Allocating the zero pages from memblock is simpler because the memory is
already reserved.
This will also help with pulling out memblock_free_all() to the generic
code and reducing code duplication in arch::mem_init().
Link: https://lkml.kernel.org/r/20250313135003.836600-6-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Guo Ren (csky) <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ioremap_prot() currently accepts pgprot_val parameter as an unsigned long,
thus implicitly assuming that pgprot_val and pgprot_t could never be
bigger than unsigned long. But this assumption soon will not be true on
arm64 when using D128 pgtables. In 128 bit page table configuration,
unsigned long is 64 bit, but pgprot_t is 128 bit.
Passing platform abstracted pgprot_t argument is better as compared to
size based data types. Let's change the parameter to directly pass
pgprot_t like another similar helper generic_ioremap_prot().
Without this change in place, D128 configuration does not work on arm64 as
the top 64 bits gets silently stripped when passing the protection value
to this function.
Link: https://lkml.kernel.org/r/20250218101954.415331-1-anshuman.khandual@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Co-developed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All PIO on MIPS platforms is memory mapped, so there is no benefit in
the lib/iomap.c wrappers that switch between inb/outb and readb/writeb
style accessses.
In fact, the '#define PIO_RESERVED 0' setting completely disables
the GENERIC_IOMAP functionality, and the '#define PIO_OFFSET
mips_io_port_base' setting is based on a misunderstanding of what the
offset is meant to do.
MIPS started using GENERIC_IOMAP in 2018 with commit b962aeb02205 ("MIPS:
Use GENERIC_IOMAP") replacing a simple custom implementation of the same
interfaces, but at the time the asm-generic/io.h version was not usable
yet. Since the header is now always included, it's now possible to go
back to the even simpler version.
Use the normal GENERIC_PCI_IOMAP functionality for all mips platforms
without the hacky GENERIC_IOMAP, and provide a custom pci_iounmap()
for the CONFIG_PCI_DRIVERS_LEGACY case to ensure the I/O port base never
gets unmapped.
The readsl() prototype needs an extra 'const' keyword to make it
compatible with the generic ioread32_rep() alias.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the huge_pte is being cleared in huge_ptep_get_and_clear().
Provide for this by adding an `unsigned long sz` parameter to the
function. This follows the same pattern as huge_pte_clear() and
set_huge_pte_at().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, loongarch, mips,
parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed
in a separate commit.
Cc: stable@vger.kernel.org
Fixes: 66b3923a1a0f ("arm64: hugetlb: add support for PTE contiguous bit")
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> # riscv
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390
Link: https://lore.kernel.org/r/20250226120656.2400136-2-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Synchronize the declaration of ds1287_set_base_clock() between
cevt-ds1287.c and ds1287.h.
Fix follow error with gcc-14 when -Werror:
arch/mips/kernel/cevt-ds1287.c:21:5: error: conflicting types for ‘ds1287_set_base_clock’; have ‘int(unsigned int)’
21 | int ds1287_set_base_clock(unsigned int hz)
| ^~~~~~~~~~~~~~~~~~~~~
In file included from arch/mips/kernel/cevt-ds1287.c:13:
./arch/mips/include/asm/ds1287.h:11:13: note: previous declaration of ‘ds1287_set_base_clock’ with type ‘void(unsigned int)’
11 | extern void ds1287_set_base_clock(unsigned int clock);
| ^~~~~~~~~~~~~~~~~~~~~
make[7]: *** [scripts/Makefile.build:207: arch/mips/kernel/cevt-ds1287.o] Error 1
make[6]: *** [scripts/Makefile.build:465: arch/mips/kernel] Error 2
make[6]: *** Waiting for unfinished jobs....
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Remove kvm_arch_sync_events() now that x86 no longer uses it (no other
arch has ever used it).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20250224235542.2562848-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
On MIPS system, most of the syscall function name begin with prefix
sys_. Some syscalls are special such as clone/fork, function name of
these begin with __sys_. Since scratch registers need be saved in
stack when these system calls happens.
With ftrace system call method, system call functions are declared with
SYSCALL_DEFINEx, metadata of the system call symbol name begins with
sys_. Here mips specific function arch_syscall_match_sym_name is used to
compare function name between sys_call_table[] and metadata of syscall
symbol.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Some information that should be retrieved at runtime for the Coherence
Manager can be either absent or wrong. This patch allows checking if
some of this information is available from the device tree and updates
the internal variable accordingly.
For now, only the compatible string associated with the broken HCI is
being retrieved.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Probe for & boot CPUs (cores & VPs) in secondary clusters (ie. not the
cluster that began booting Linux) when they are present in systems with
CM 3.5 or higher.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Chao-ying Fu <cfu@wavecomp.com>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
In preparation for supporting multi-cluster systems, introduce a struct
cluster_boot_config as an extra layer in the boot configuration
maintained by the MIPS Coherent Processing System (CPS) SMP
implementation. For now only one struct cluster_boot_config will be
allocated & we'll simply defererence its core_config field to find the
struct core_boot_config array which can be used to boot as usual.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The generic storage implementation provides the same features as the
custom one. However it can be shared between architectures, making
maintenance easier.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-13-13a4669dfc8c@linutronix.de
|
|
This makes ptrace/get_syscall_info selftest pass on mips o32 and
mips64 o32 by fixing the following two test assertions:
1. get_syscall_info test assertion on mips o32:
# get_syscall_info.c:218:get_syscall_info:Expected exp_args[5] (3134521044) == info.entry.args[4] (4911432)
# get_syscall_info.c:219:get_syscall_info:wait #1: entry stop mismatch
2. get_syscall_info test assertion on mips64 o32:
# get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (18446744072548908753)
# get_syscall_info.c:210:get_syscall_info:wait #1: entry stop mismatch
The first assertion happens due to mips_get_syscall_arg() trying to access
another task's context but failing to do it properly because get_user() it
calls just peeks at the current task's context. It usually does not crash
because the default user stack always gets assigned the same VMA, but it
is pure luck which mips_get_syscall_arg() wouldn't have if e.g. the stack
was switched (via setcontext(3) or however) or a non-default process's
thread peeked at, and in any case irrelevant data is obtained just as
observed with the test case.
mips_get_syscall_arg() ought to be using access_remote_vm() instead to
retrieve the other task's stack contents, but given that the data has been
already obtained and saved in `struct pt_regs' it would be an overkill.
The first assertion is fixed for mips o32 by using struct pt_regs.args
instead of get_user() to obtain syscall arguments. This approach works
due to this piece in arch/mips/kernel/scall32-o32.S:
/*
* Ok, copy the args from the luser stack to the kernel stack.
*/
.set push
.set noreorder
.set nomacro
load_a4: user_lw(t5, 16(t0)) # argument #5 from usp
load_a5: user_lw(t6, 20(t0)) # argument #6 from usp
load_a6: user_lw(t7, 24(t0)) # argument #7 from usp
load_a7: user_lw(t8, 28(t0)) # argument #8 from usp
loads_done:
sw t5, PT_ARG4(sp) # argument #5 to ksp
sw t6, PT_ARG5(sp) # argument #6 to ksp
sw t7, PT_ARG6(sp) # argument #7 to ksp
sw t8, PT_ARG7(sp) # argument #8 to ksp
.set pop
.section __ex_table,"a"
PTR_WD load_a4, bad_stack_a4
PTR_WD load_a5, bad_stack_a5
PTR_WD load_a6, bad_stack_a6
PTR_WD load_a7, bad_stack_a7
.previous
arch/mips/kernel/scall64-o32.S has analogous code for mips64 o32 that
allows fixing the issue by obtaining syscall arguments from struct
pt_regs.regs[4..11] instead of the erroneous use of get_user().
The second assertion is fixed by truncating 64-bit values to 32-bit
syscall arguments.
Fixes: c0ff3c53d4f9 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.")
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
We have several places across the kernel where we want to access another
task's syscall arguments, such as ptrace(2), seccomp(2), etc., by making
a call to syscall_get_arguments().
This works for register arguments right away by accessing the task's
`regs' member of `struct pt_regs', however for stack arguments seen with
32-bit/o32 kernels things are more complicated. Technically they ought
to be obtained from the user stack with calls to an access_remote_vm(),
but we have an easier way available already.
So as to be able to access syscall stack arguments as regular function
arguments following the MIPS calling convention we copy them over from
the user stack to the kernel stack in arch/mips/kernel/scall32-o32.S, in
handle_sys(), to the current stack frame's outgoing argument space at
the top of the stack, which is where the handler called expects to see
its incoming arguments. This area is also pointed at by the `pt_regs'
pointer obtained by task_pt_regs().
Make the o32 stack argument space a proper member of `struct pt_regs'
then, by renaming the existing member from `pad0' to `args' and using
generated offsets to access the space. No functional change though.
With the change in place the o32 kernel stack frame layout at the entry
to a syscall handler invoked by handle_sys() is therefore as follows:
$sp + 68 -> | ... | <- pt_regs.regs[9]
+---------------------+
$sp + 64 -> | $t0 | <- pt_regs.regs[8]
+---------------------+
$sp + 60 -> | $a3/argument #4 | <- pt_regs.regs[7]
+---------------------+
$sp + 56 -> | $a2/argument #3 | <- pt_regs.regs[6]
+---------------------+
$sp + 52 -> | $a1/argument #2 | <- pt_regs.regs[5]
+---------------------+
$sp + 48 -> | $a0/argument #1 | <- pt_regs.regs[4]
+---------------------+
$sp + 44 -> | $v1 | <- pt_regs.regs[3]
+---------------------+
$sp + 40 -> | $v0 | <- pt_regs.regs[2]
+---------------------+
$sp + 36 -> | $at | <- pt_regs.regs[1]
+---------------------+
$sp + 32 -> | $zero | <- pt_regs.regs[0]
+---------------------+
$sp + 28 -> | stack argument #8 | <- pt_regs.args[7]
+---------------------+
$sp + 24 -> | stack argument #7 | <- pt_regs.args[6]
+---------------------+
$sp + 20 -> | stack argument #6 | <- pt_regs.args[5]
+---------------------+
$sp + 16 -> | stack argument #5 | <- pt_regs.args[4]
+---------------------+
$sp + 12 -> | psABI space for $a3 | <- pt_regs.args[3]
+---------------------+
$sp + 8 -> | psABI space for $a2 | <- pt_regs.args[2]
+---------------------+
$sp + 4 -> | psABI space for $a1 | <- pt_regs.args[1]
+---------------------+
$sp + 0 -> | psABI space for $a0 | <- pt_regs.args[0]
+---------------------+
holding user data received and with the first 4 frame slots reserved by
the psABI for the compiler to spill the incoming arguments from $a0-$a3
registers (which it sometimes does according to its needs) and the next
4 frame slots designated by the psABI for any stack function arguments
that follow. This data is also available for other tasks to peek/poke
at as reqired and where permitted.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: pci-legacy: Override pci_address_to_pio
MIPS: Loongson64: env: Use str_on_off() helper in prom_lefi_init_env()
MIPS: migrate to generic rule for built-in DTBs
mips: fix shmctl/semctl/msgctl syscall for o32
mips/math-emu: fix emulation of the prefx instruction
MIPS: Loongson: Add comments for interface_info
MIPS: Loongson64: remove ROM Size unit in boardinfo
MIPS: traps: Use str_enabled_disabled() in parity_protection_init()
MIPS: ftrace: Declare ftrace_get_parent_ra_addr() as static
Revert "MIPS: csrc-r4k: Select HAVE_UNSTABLE_SCHED_CLOCK if SMP && 64BIT"
MIPS: Fix the wrong format specifier
MIPS: Add a blank line after __HEAD
MIPS: kernel: Rename read/write_c0_ecc to read/writec0_errctl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs.
- "Allocate and free frozen pages" from Matthew Wilcox reorganizes
the page allocator so we end up with the ability to allocate and
free zero-refcount pages. So that callers (ie, slab) can avoid a
refcount inc & dec
- "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to
use large folios other than PMD-sized ones
- "Fix mm/rodata_test" from Petr Tesarik performs some maintenance
and fixes for this small built-in kernel selftest
- "mas_anode_descend() related cleanup" from Wei Yang tidies up part
of the mapletree code
- "mm: fix format issues and param types" from Keren Sun implements a
few minor code cleanups
- "simplify split calculation" from Wei Yang provides a few fixes and
a test for the mapletree code
- "mm/vma: make more mmap logic userland testable" from Lorenzo
Stoakes continues the work of moving vma-related code into the
(relatively) new mm/vma.c
- "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David
Hildenbrand cleans up and rationalizes handling of gfp flags in the
page allocator
- "readahead: Reintroduce fix for improper RA window sizing" from Jan
Kara is a second attempt at fixing a readahead window sizing issue.
It should reduce the amount of unnecessary reading
- "synchronously scan and reclaim empty user PTE pages" from Qi Zheng
addresses an issue where "huge" amounts of pte pagetables are
accumulated:
https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/
Qi's series addresses this windup by synchronously freeing PTE
memory within the context of madvise(MADV_DONTNEED)
- "selftest/mm: Remove warnings found by adding compiler flags" from
Muhammad Usama Anjum fixes some build warnings in the selftests
code when optional compiler warnings are enabled
- "mm: don't use __GFP_HARDWALL when migrating remote pages" from
David Hildenbrand tightens the allocator's observance of
__GFP_HARDWALL
- "pkeys kselftests improvements" from Kevin Brodsky implements
various fixes and cleanups in the MM selftests code, mainly
pertaining to the pkeys tests
- "mm/damon: add sample modules" from SeongJae Park enhances DAMON to
estimate application working set size
- "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn
provides some cleanups to memcg's hugetlb charging logic
- "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song
removes the global swap cgroup lock. A speedup of 10% for a
tmpfs-based kernel build was demonstrated
- "zram: split page type read/write handling" from Sergey Senozhatsky
has several fixes and cleaups for zram in the area of
zram_write_page(). A watchdog softlockup warning was eliminated
- "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin
Brodsky cleans up the pagetable destructor implementations. A rare
use-after-free race is fixed
- "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes
simplifies and cleans up the debugging code in the VMA merging
logic
- "Account page tables at all levels" from Kevin Brodsky cleans up
and regularizes the pagetable ctor/dtor handling. This results in
improvements in accounting accuracy
- "mm/damon: replace most damon_callback usages in sysfs with new
core functions" from SeongJae Park cleans up and generalizes
DAMON's sysfs file interface logic
- "mm/damon: enable page level properties based monitoring" from
SeongJae Park increases the amount of information which is
presented in response to DAMOS actions
- "mm/damon: remove DAMON debugfs interface" from SeongJae Park
removes DAMON's long-deprecated debugfs interfaces. Thus the
migration to sysfs is completed
- "mm/hugetlb: Refactor hugetlb allocation resv accounting" from
Peter Xu cleans up and generalizes the hugetlb reservation
accounting
- "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino
removes a never-used feature of the alloc_pages_bulk() interface
- "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park
extends DAMOS filters to support not only exclusion (rejecting),
but also inclusion (allowing) behavior
- "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi
introduces a new memory descriptor for zswap.zpool that currently
overlaps with struct page for now. This is part of the effort to
reduce the size of struct page and to enable dynamic allocation of
memory descriptors
- "mm, swap: rework of swap allocator locks" from Kairui Song redoes
and simplifies the swap allocator locking. A speedup of 400% was
demonstrated for one workload. As was a 35% reduction for kernel
build time with swap-on-zram
- "mm: update mips to use do_mmap(), make mmap_region() internal"
from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that
mmap_region() can be made MM-internal
- "mm/mglru: performance optimizations" from Yu Zhao fixes a few
MGLRU regressions and otherwise improves MGLRU performance
- "Docs/mm/damon: add tuning guide and misc updates" from SeongJae
Park updates DAMON documentation
- "Cleanup for memfd_create()" from Isaac Manjarres does that thing
- "mm: hugetlb+THP folio and migration cleanups" from David
Hildenbrand provides various cleanups in the areas of hugetlb
folios, THP folios and migration
- "Uncached buffered IO" from Jens Axboe implements the new
RWF_DONTCACHE flag which provides synchronous dropbehind for
pagecache reading and writing. To permite userspace to address
issues with massive buildup of useless pagecache when
reading/writing fast devices
- "selftests/mm: virtual_address_range: Reduce memory" from Thomas
Weißschuh fixes and optimizes some of the MM selftests"
* tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm/compaction: fix UBSAN shift-out-of-bounds warning
s390/mm: add missing ctor/dtor on page table upgrade
kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags()
tools: add VM_WARN_ON_VMG definition
mm/damon/core: use str_high_low() helper in damos_wmark_wait_us()
seqlock: add missing parameter documentation for raw_seqcount_try_begin()
mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh
mm/page_alloc: remove the incorrect and misleading comment
zram: remove zcomp_stream_put() from write_incompressible_page()
mm: separate move/undo parts from migrate_pages_batch()
mm/kfence: use str_write_read() helper in get_access_type()
selftests/mm/mkdirty: fix memory leak in test_uffdio_copy()
kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags()
selftests/mm: virtual_address_range: avoid reading from VM_IO mappings
selftests/mm: vm_util: split up /proc/self/smaps parsing
selftests/mm: virtual_address_range: unmap chunks after validation
selftests/mm: virtual_address_range: mmap() without PROT_WRITE
selftests/memfd/memfd_test: fix possible NULL pointer dereference
mm: add FGP_DONTCACHE folio creation flag
mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue
...
|
|
We already have a generic implementation of alloc/free up to P4D level, as
well as pgd_free(). Let's finish the work and add a generic PGD-level
alloc helper as well.
Unlike at lower levels, almost all architectures need some specific magic
at PGD level (typically initialising PGD entries), so introducing a
generic pgd_alloc() isn't worth it. Instead we introduce two new helpers,
__pgd_alloc() and __pgd_free(), and make use of them in the arch-specific
pgd_alloc() and pgd_free() wherever possible. To accommodate as many arch
as possible, __pgd_alloc() takes a page allocation order.
Because pagetable_alloc() allocates zeroed pages, explicit zeroing in
pgd_alloc() becomes redundant and we can get rid of it. Some trivial
implementations of pgd_free() also become unnecessary once __pgd_alloc()
is used; remove them.
Another small improvement is consistent accounting of PGD pages by using
GFP_PGTABLE_{USER,KERNEL} as appropriate.
Not all PGD allocations can be handled by the generic helpers. In
particular, multiple architectures allocate PGDs from a kmem_cache, and
those PGDs may not be page-sized.
Link: https://lkml.kernel.org/r/20250103184415.2744423-6-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The pagetable_p*_dtor() are exactly the same except for the handling of
ptlock. If we make ptlock_free() handle the case where ptdesc->ptl is
NULL and remove VM_BUG_ON_PAGE() from pmd_ptlock_free(), we can unify
pagetable_p*_dtor() into one function. Let's introduce pagetable_dtor()
to do this.
Later, pagetable_dtor() will be moved to tlb_remove_ptdesc(), so that
ptlock and page table pages can be freed together (regardless of whether
RCU is used). This prevents the use-after-free problem where the ptlock
is freed immediately but the page table pages is freed later via RCU.
Link: https://lkml.kernel.org/r/47f44fff9dc68d9d9e9a0d6c036df275f820598a.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Clarify meanings of members of interface_info, especially for .size,
which does not define the ROM size.
Suggested-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Kexy Biscuit <kexybiscuit@aosc.io>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
CP0 register 26 is used as ECC register for legacy cores, but newer
cores (MIPS32/MIPS64) use it as an ErrCtl register. Since the kernel only
uses CP0 26 as ErrCtl register rename the access functions to the more
fitting name.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add new socket option, SO_RCVPRIORITY, to include SO_PRIORITY in the
ancillary data returned by recvmsg().
This is analogous to the existing support for SO_RCVMARK,
as implemented in commit 6fd1d51cfa253 ("net: SO_RCVMARK socket option
for SO_MARK with recvmsg()").
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-5-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection
algorithm. This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping
code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of
shadow entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in
the hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page
into small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to
do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio
size rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel
Butt removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations"
from Mike Rapoport teaches x86 to use large pages for
read-only-execute module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
tests over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a
single VMA, rather than requiring that multiple VMAs be created for
this. Improved efficiencies for userspace memory allocators are
expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP
from the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep
is enabled.
* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
mm/kfence: add a new kunit test test_use_after_free_read_nofault()
zram: fix NULL pointer in comp_algorithm_show()
memcg/hugetlb: add hugeTLB counters to memcg
vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
zram: ZRAM_DEF_COMP should depend on ZRAM
MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
Docs/mm/damon: recommend academic papers to read and/or cite
mm: define general function pXd_init()
kmemleak: iommu/iova: fix transient kmemleak false positive
mm/list_lru: simplify the list_lru walk callback function
mm/list_lru: split the lock to per-cgroup scope
mm/list_lru: simplify reparenting and initial allocation
mm/list_lru: code clean up for reparenting
mm/list_lru: don't export list_lru_add
mm/list_lru: don't pass unnecessary key parameters
kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are a number of unrelated cleanups, generally simplifying the
architecture specific header files:
- A series from Al Viro simplifies asm/vga.h, after it turns out that
most of it can be generalized.
- A series from Julian Vetter adds a common version of
memcpy_{to,from}io() and memset_io() and changes most architectures
to use that instead of their own implementation
- A series from Niklas Schnelle concludes his work to make PC style
inb()/outb() optional
- Nicolas Pitre contributes improvements for the generic do_div()
helper
- Christoph Hellwig adds a generic version of page_to_phys() and
phys_to_page(), replacing the slightly different architecture
specific definitions.
- Uwe Kleine-Koenig has a minor cleanup for ioctl definitions"
* tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
empty include/asm-generic/vga.h
sparc: get rid of asm/vga.h
asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to
vt_buffer.h: get rid of dead code in default scr_...() instances
tty: serial: export serial_8250_warn_need_ioport
lib/iomem_copy: fix kerneldoc format style
hexagon: simplify asm/io.h for !HAS_IOPORT
loongarch: Use new fallback IO memcpy/memset
csky: Use new fallback IO memcpy/memset
arm64: Use new fallback IO memcpy/memset
New implementation for IO memcpy and IO memset
watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240
__arch_xprod64(): make __always_inline when optimizing for performance
ARM: div64: improve __arch_xprod_64()
asm-generic/div64: optimize/simplify __div64_const32()
lib/math/test_div64: add some edge cases relevant to __div64_const32()
asm-generic: add an optional pfn_valid check to page_to_phys
asm-generic: provide generic page_to_phys and phys_to_page implementations
asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n
tty: serial: handle HAS_IOPORT dependencies
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vdso data page handling updates from Thomas Gleixner:
"First steps of consolidating the VDSO data page handling.
The VDSO data page handling is architecture specific for historical
reasons, but there is no real technical reason to do so.
Aside of that VDSO data has become a dump ground for various
mechanisms and fail to provide a clear separation of the
functionalities.
Clean this up by:
- consolidating the VDSO page data by getting rid of architecture
specific warts especially in x86 and PowerPC.
- removing the last includes of header files which are pulling in
other headers outside of the VDSO namespace.
- seperating timekeeping and other VDSO data accordingly.
Further consolidation of the VDSO page handling is done in subsequent
changes scheduled for the next merge window.
This also lays the ground for expanding the VDSO time getters for
independent PTP clocks in a generic way without making every
architecture add support seperately"
* tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/vdso: Add missing brackets in switch case
vdso: Rename struct arch_vdso_data to arch_vdso_time_data
powerpc: Split systemcfg struct definitions out from vdso
powerpc: Split systemcfg data out of vdso data page
powerpc: Add kconfig option for the systemcfg page
powerpc/pseries/lparcfg: Use num_possible_cpus() for potential processors
powerpc/pseries/lparcfg: Fix printing of system_active_processors
powerpc/procfs: Propagate error of remap_pfn_range()
powerpc/vdso: Remove offset comment from 32bit vdso_arch_data
x86/vdso: Split virtual clock pages into dedicated mapping
x86/vdso: Delete vvar.h
x86/vdso: Access vdso data without vvar.h
x86/vdso: Move the rng offset to vsyscall.h
x86/vdso: Access rng vdso data without vvar.h
x86/vdso: Access timens vdso data without vvar.h
x86/vdso: Allocate vvar page from C code
x86/vdso: Access rng data from kernel without vvar
x86/vdso: Place vdso_data at beginning of vvar page
x86/vdso: Use __arch_get_vdso_data() to access vdso data
x86/mm/mmap: Remove arch_vma_name()
...
|
|
pud_init(), pmd_init() and kernel_pte_init() are duplicated defined in
file kasan.c and sparse-vmemmap.c as weak functions. Move them to generic
header file pgtable.h, architecture can redefine them.
Link: https://lkml.kernel.org/r/20241104070712.52902-1-maobibo@loongson.cn
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
... if they are identical to fallbacks, just leave them alone.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Implement a new lightweight guard page feature, that is regions of
userland virtual memory that, when accessed, cause a fatal signal to
arise.
Currently users must establish PROT_NONE ranges to achieve this.
However this is very costly memory-wise - we need a VMA for each and every
one of these regions AND they become unmergeable with surrounding VMAs.
In addition repeated mmap() calls require repeated kernel context switches
and contention of the mmap lock to install these ranges, potentially also
having to unmap memory if installed over existing ranges.
The lightweight guard approach eliminates the VMA cost altogether - rather
than establishing a PROT_NONE VMA, it operates at the level of page table
entries - establishing PTE markers such that accesses to them cause a
fault followed by a SIGSGEV signal being raised.
This is achieved through the PTE marker mechanism, which we have already
extended to provide PTE_MARKER_GUARD, which we installed via the generic
page walking logic which we have extended for this purpose.
These guard ranges are established with MADV_GUARD_INSTALL. If the range
in which they are installed contain any existing mappings, they will be
zapped, i.e. free the range and unmap memory (thus mimicking the
behaviour of MADV_DONTNEED in this respect).
Any existing guard entries will be left untouched. There is therefore no
nesting of guarded pages.
Guarded ranges are NOT cleared by MADV_DONTNEED nor MADV_FREE (in both
instances the memory range may be reused at which point a user would
expect guards to still be in place), but they are cleared via
MADV_GUARD_REMOVE, process teardown or unmapping of memory ranges.
The guard property can be removed from ranges via MADV_GUARD_REMOVE. The
ranges over which this is applied, should they contain non-guard entries,
will be untouched, with only guard entries being cleared.
We permit this operation on anonymous memory only, and only VMAs which are
non-special, non-huge and not mlock()'d (if we permitted this we'd have to
drop locked pages which would be rather counterintuitive).
Racing page faults can cause repeated attempts to install guard pages that
are interrupted, result in a zap, and this process can end up being
repeated. If this happens more than would be expected in normal
operation, we rescind locks and retry the whole thing, which avoids lock
contention in this scenario.
Link: https://lkml.kernel.org/r/6aafb5821bf209f277dfae0787abb2ef87a37542.1730123433.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Jann Horn <jannh@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Jann Horn <jannh@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
