summaryrefslogtreecommitdiff
path: root/arch/riscv/kernel
AgeCommit message (Collapse)Author
2025-06-30riscv: cpu_ops_sbi: Use static array for boot_dataVivian Wang
Since commit 6b9f29b81b15 ("riscv: Enable pcpu page first chunk allocator"), if NUMA is enabled, the page percpu allocator may be used on very sparse configurations, or when requested on boot with percpu_alloc=page. In that case, percpu data gets put in the vmalloc area. However, sbi_hsm_hart_start() needs the physical address of a sbi_hart_boot_data, and simply assumes that __pa() would work. This causes the just started hart to immediately access an invalid address and hang. Fortunately, struct sbi_hart_boot_data is not too large, so we can simply allocate an array for boot_data statically, putting it in the kernel image. This fixes NUMA=y SMP boot on Sophgo SG2042. To reproduce on QEMU: Set CONFIG_NUMA=y and CONFIG_DEBUG_VIRTUAL=y, then run with: qemu-system-riscv64 -M virt -smp 2 -nographic \ -kernel arch/riscv/boot/Image \ -append "percpu_alloc=page" Kernel output: [ 0.000000] Booting Linux on hartid 0 [ 0.000000] Linux version 6.16.0-rc1 (dram@sakuya) (riscv64-unknown-linux-gnu-gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #11 SMP Tue Jun 24 14:56:22 CST 2025 ... [ 0.000000] percpu: 28 4K pages/cpu s85784 r8192 d20712 ... [ 0.083192] smp: Bringing up secondary CPUs ... [ 0.086722] ------------[ cut here ]------------ [ 0.086849] virt_to_phys used for non-linear address: (____ptrval____) (0xff2000000001d080) [ 0.088001] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xae/0xe8 [ 0.088376] Modules linked in: [ 0.088656] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.16.0-rc1 #11 NONE [ 0.088833] Hardware name: riscv-virtio,qemu (DT) [ 0.088948] epc : __virt_to_phys+0xae/0xe8 [ 0.089001] ra : __virt_to_phys+0xae/0xe8 [ 0.089037] epc : ffffffff80021eaa ra : ffffffff80021eaa sp : ff2000000004bbc0 [ 0.089057] gp : ffffffff817f49c0 tp : ff60000001d60000 t0 : 5f6f745f74726976 [ 0.089076] t1 : 0000000000000076 t2 : 705f6f745f747269 s0 : ff2000000004bbe0 [ 0.089095] s1 : ff2000000001d080 a0 : 0000000000000000 a1 : 0000000000000000 [ 0.089113] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.089131] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 0.089155] s2 : ffffffff8130dc00 s3 : 0000000000000001 s4 : 0000000000000001 [ 0.089174] s5 : ffffffff8185eff8 s6 : ff2000007f1eb000 s7 : ffffffff8002a2ec [ 0.089193] s8 : 0000000000000001 s9 : 0000000000000001 s10: 0000000000000000 [ 0.089211] s11: 0000000000000000 t3 : ffffffff8180a9f7 t4 : ffffffff8180a9f7 [ 0.089960] t5 : ffffffff8180a9f8 t6 : ff2000000004b9d8 [ 0.089984] status: 0000000200000120 badaddr: ffffffff80021eaa cause: 0000000000000003 [ 0.090101] [<ffffffff80021eaa>] __virt_to_phys+0xae/0xe8 [ 0.090228] [<ffffffff8001d796>] sbi_cpu_start+0x6e/0xe8 [ 0.090247] [<ffffffff8001a5da>] __cpu_up+0x1e/0x8c [ 0.090260] [<ffffffff8002a32e>] bringup_cpu+0x42/0x258 [ 0.090277] [<ffffffff8002914c>] cpuhp_invoke_callback+0xe0/0x40c [ 0.090292] [<ffffffff800294e0>] __cpuhp_invoke_callback_range+0x68/0xfc [ 0.090320] [<ffffffff8002a96a>] _cpu_up+0x11a/0x244 [ 0.090334] [<ffffffff8002aae6>] cpu_up+0x52/0x90 [ 0.090384] [<ffffffff80c09350>] bringup_nonboot_cpus+0x78/0x118 [ 0.090411] [<ffffffff80c11060>] smp_init+0x34/0xb8 [ 0.090425] [<ffffffff80c01220>] kernel_init_freeable+0x148/0x2e4 [ 0.090442] [<ffffffff80b83802>] kernel_init+0x1e/0x14c [ 0.090455] [<ffffffff800124ca>] ret_from_fork_kernel+0xe/0xf0 [ 0.090471] [<ffffffff80b8d9c2>] ret_from_fork_kernel_asm+0x16/0x18 [ 0.090560] ---[ end trace 0000000000000000 ]--- [ 1.179875] CPU1: failed to come online [ 1.190324] smp: Brought up 1 node, 1 CPU Cc: stable@vger.kernel.org Reported-by: Han Gao <rabenda.cn@gmail.com> Fixes: 6b9f29b81b15 ("riscv: Enable pcpu page first chunk allocator") Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn> Link: https://lore.kernel.org/r/20250624-riscv-hsm-boot-data-array-v1-1-50b5eeafbe61@iscas.ac.cn Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
2025-06-23riscv: export boot_cpu_hartidKlara Modin
The mailbox controller driver for the Microchip Inter-processor Communication can be built as a module. It uses cpuid_to_hartid_map and commit 4783ce32b080 ("riscv: export __cpuid_to_hartid_map") enables that to work for SMP. However, cpuid_to_hartid_map uses boot_cpu_hartid on non-SMP kernels and this driver can be useful in such configurations[1]. Export boot_cpu_hartid so the driver can be built as a module on non-SMP kernels as well. Link: https://lore.kernel.org/lkml/20250617-confess-reimburse-876101e099cb@spud/ [1] Cc: stable@vger.kernel.org Fixes: e4b1d67e7141 ("mailbox: add Microchip IPC support") Signed-off-by: Klara Modin <klarasmodin@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250617125847.23829-1-klarasmodin@gmail.com Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-23riscv: Fix sparse warning in vendor_extensions/sifive.cAlexandre Ghiti
sparse reports the following warning: arch/riscv/kernel/vendor_extensions/sifive.c:11:33: sparse: sparse: symbol 'riscv_isa_vendor_ext_sifive' was not declared. Should it be static? So as this struct is only used in this file, make it static. Fixes: 2d147d77ae6e ("riscv: Add SiFive xsfvqmaccdod and xsfvqmaccqoq vendor extensions") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505072100.TZlEp8h1-lkp@intel.com/ Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20250620-dev-alex-fix_sparse_sifive_v1-v1-1-efa3a6f93846@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-23Revert "riscv: misaligned: fix sleeping function called during misaligned ↵Nam Cao
access handling" This reverts commit 61a74ad25462 ("riscv: misaligned: fix sleeping function called during misaligned access handling"). The commit addresses a sleeping in atomic context problem, but it is not the correct fix as explained by Clément: "Using nofault would lead to failure to read from user memory that is paged out for instance. This is not really acceptable, we should handle user misaligned access even at an address that would generate a page fault." This bug has been properly fixed by commit 453805f0a28f ("riscv: misaligned: enable IRQs while handling misaligned accesses"). Revert this improper fix. Link: https://lore.kernel.org/linux-riscv/b779beed-e44e-4a5e-9551-4647682b0d21@rivosinc.com/ Signed-off-by: Nam Cao <namcao@linutronix.de> Cc: stable@vger.kernel.org Reviewed-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Fixes: 61a74ad25462 ("riscv: misaligned: fix sleeping function called during misaligned access handling") Link: https://lore.kernel.org/r/20250620110939.1642735-1-namcao@linutronix.de Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-10riscv: vdso: Exclude .rodata from the PT_DYNAMIC segmentFangrui Song
.rodata is implicitly included in the PT_DYNAMIC segment due to inheriting the segment of the preceding .dynamic section (in both GNU ld and LLD). When the .rodata section's size is not a multiple of 16 bytes on riscv64, llvm-readelf will report a "PT_DYNAMIC dynamic table is invalid" warning. Note: in the presence of the .dynamic section, GNU readelf and llvm-readelf's -d option decodes the dynamic section using the section. This issue arose after commit 8f8c1ff879fab60f80f3a7aec3000f47e5b03ba9 ("riscv: vdso.lds.S: remove hardcoded 0x800 .text start addr"), which placed .rodata directly after .dynamic by removing .eh_frame. This patch resolves the implicit inclusion into PT_DYNAMIC by explicitly specifying the :text output section phdr. Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://github.com/ClangBuiltLinux/linux/issues/2093 Signed-off-by: Fangrui Song <i@maskray.me> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250602-riscv-vdso-v1-1-0620cf63cff0@maskray.me Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-07Merge tag 'kbuild-v6.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which exports a symbol only to specified modules - Improve ABI handling in gendwarfksyms - Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n - Add checkers for redundant or missing <linux/export.h> inclusion - Deprecate the extra-y syntax - Fix a genksyms bug when including enum constants from *.symref files * tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits) genksyms: Fix enum consts from a reference affecting new values arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES} efi/libstub: use 'targets' instead of extra-y in Makefile module: make __mod_device_table__* symbols static scripts/misc-check: check unnecessary #include <linux/export.h> when W=1 scripts/misc-check: check missing #include <linux/export.h> when W=1 scripts/misc-check: add double-quotes to satisfy shellcheck kbuild: move W=1 check for scripts/misc-check to top-level Makefile scripts/tags.sh: allow to use alternative ctags implementation kconfig: introduce menu type enum docs: symbol-namespaces: fix reST warning with literal block kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION docs/core-api/symbol-namespaces: drop table of contents and section numbering modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time kbuild: move kbuild syntax processing to scripts/Makefile.build Makefile: remove dependency on archscripts for header installation Documentation/kbuild: Add new gendwarfksyms kABI rules Documentation/kbuild: Drop section numbers ...
2025-06-07arch: use always-$(KBUILD_BUILTIN) for vmlinux.ldsMasahiro Yamada
The extra-y syntax is deprecated. Instead, use always-$(KBUILD_BUILTIN), which behaves equivalently. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2025-06-06Merge tag 'riscv-for-linus-6.16-mw1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for the FWFT SBI extension, which is part of SBI 3.0 and a dependency for many new SBI and ISA extensions - Support for getrandom() in the VDSO - Support for mseal - Optimized routines for raid6 syndrome and recovery calculations - kexec_file() supports loading Image-formatted kernel binaries - Improvements to the instruction patching framework to allow for atomic instruction patching, along with rules as to how systems need to behave in order to function correctly - Support for a handful of new ISA extensions: Svinval, Zicbop, Zabha, some SiFive vendor extensions - Various fixes and cleanups, including: misaligned access handling, perf symbol mangling, module loading, PUD THPs, and improved uaccess routines * tag 'riscv-for-linus-6.16-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (69 commits) riscv: uaccess: Only restore the CSR_STATUS SUM bit RISC-V: vDSO: Wire up getrandom() vDSO implementation riscv: enable mseal sysmap for RV64 raid6: Add RISC-V SIMD syndrome and recovery calculations riscv: mm: Add support for Svinval extension RISC-V: Documentation: Add enough title underlines to CMODX riscv: Improve Kconfig help for RISCV_ISA_V_PREEMPTIVE MAINTAINERS: Update Atish's email address riscv: uaccess: do not do misaligned accesses in get/put_user() riscv: process: use unsigned int instead of unsigned long for put_user() riscv: make unsafe user copy routines use existing assembly routines riscv: hwprobe: export Zabha extension riscv: Make regs_irqs_disabled() more clear perf symbols: Ignore mapping symbols on riscv RISC-V: Kconfig: Fix help text of CMDLINE_EXTEND riscv: module: Optimize PLT/GOT entry counting riscv: Add support for PUD THP riscv: xchg: Prefetch the destination word for sc.w riscv: Add ARCH_HAS_PREFETCH[W] support with Zicbop riscv: Add support for Zicbop ...
2025-06-05Merge patch series "riscv: add SBI FWFT misaligned exception delegation support"Palmer Dabbelt
Clément Léger <cleger@rivosinc.com> says: The SBI Firmware Feature extension allows the S-mode to request some specific features (either hardware or software) to be enabled. This series uses this extension to request misaligned access exception delegation to S-mode in order to let the kernel handle it. It also adds support for the KVM FWFT SBI extension based on the misaligned access handling infrastructure. FWFT SBI extension is part of the SBI V3.0 specifications [1]. It can be tested using the qemu provided at [2] which contains the series from [3]. Upstream kvm-unit-tests can be used inside kvm to tests the correct delegation of misaligned exceptions. Upstream OpenSBI can be used. The tests can be run using the kselftest from series [4]. $ qemu-system-riscv64 \ -cpu rv64,trap-misaligned-access=true,v=true \ -M virt \ -m 1024M \ -bios fw_dynamic.bin \ -kernel Image ... # ./misaligned TAP version 13 1..23 # Starting 23 tests from 1 test cases. # RUN global.gp_load_lh ... # OK global.gp_load_lh ok 1 global.gp_load_lh # RUN global.gp_load_lhu ... # OK global.gp_load_lhu ok 2 global.gp_load_lhu # RUN global.gp_load_lw ... # OK global.gp_load_lw ok 3 global.gp_load_lw # RUN global.gp_load_lwu ... # OK global.gp_load_lwu ok 4 global.gp_load_lwu # RUN global.gp_load_ld ... # OK global.gp_load_ld ok 5 global.gp_load_ld # RUN global.gp_load_c_lw ... # OK global.gp_load_c_lw ok 6 global.gp_load_c_lw # RUN global.gp_load_c_ld ... # OK global.gp_load_c_ld ok 7 global.gp_load_c_ld # RUN global.gp_load_c_ldsp ... # OK global.gp_load_c_ldsp ok 8 global.gp_load_c_ldsp # RUN global.gp_load_sh ... # OK global.gp_load_sh ok 9 global.gp_load_sh # RUN global.gp_load_sw ... # OK global.gp_load_sw ok 10 global.gp_load_sw # RUN global.gp_load_sd ... # OK global.gp_load_sd ok 11 global.gp_load_sd # RUN global.gp_load_c_sw ... # OK global.gp_load_c_sw ok 12 global.gp_load_c_sw # RUN global.gp_load_c_sd ... # OK global.gp_load_c_sd ok 13 global.gp_load_c_sd # RUN global.gp_load_c_sdsp ... # OK global.gp_load_c_sdsp ok 14 global.gp_load_c_sdsp # RUN global.fpu_load_flw ... # OK global.fpu_load_flw ok 15 global.fpu_load_flw # RUN global.fpu_load_fld ... # OK global.fpu_load_fld ok 16 global.fpu_load_fld # RUN global.fpu_load_c_fld ... # OK global.fpu_load_c_fld ok 17 global.fpu_load_c_fld # RUN global.fpu_load_c_fldsp ... # OK global.fpu_load_c_fldsp ok 18 global.fpu_load_c_fldsp # RUN global.fpu_store_fsw ... # OK global.fpu_store_fsw ok 19 global.fpu_store_fsw # RUN global.fpu_store_fsd ... # OK global.fpu_store_fsd ok 20 global.fpu_store_fsd # RUN global.fpu_store_c_fsd ... # OK global.fpu_store_c_fsd ok 21 global.fpu_store_c_fsd # RUN global.fpu_store_c_fsdsp ... # OK global.fpu_store_c_fsdsp ok 22 global.fpu_store_c_fsdsp # RUN global.gen_sigbus ... [12797.988647] misaligned[618]: unhandled signal 7 code 0x1 at 0x0000000000014dc0 in misaligned[4dc0,10000+76000] [12797.988990] CPU: 0 UID: 0 PID: 618 Comm: misaligned Not tainted 6.13.0-rc6-00008-g4ec4468967c9-dirty #51 [12797.989169] Hardware name: riscv-virtio,qemu (DT) [12797.989264] epc : 0000000000014dc0 ra : 0000000000014d00 sp : 00007fffe165d100 [12797.989407] gp : 000000000008f6e8 tp : 0000000000095760 t0 : 0000000000000008 [12797.989544] t1 : 00000000000965d8 t2 : 000000000008e830 s0 : 00007fffe165d160 [12797.989692] s1 : 000000000000001a a0 : 0000000000000000 a1 : 0000000000000002 [12797.989831] a2 : 0000000000000000 a3 : 0000000000000000 a4 : ffffffffdeadbeef [12797.989964] a5 : 000000000008ef61 a6 : 626769735f6e0000 a7 : fffffffffffff000 [12797.990094] s2 : 0000000000000001 s3 : 00007fffe165d838 s4 : 00007fffe165d848 [12797.990238] s5 : 000000000000001a s6 : 0000000000010442 s7 : 0000000000010200 [12797.990391] s8 : 000000000000003a s9 : 0000000000094508 s10: 0000000000000000 [12797.990526] s11: 0000555567460668 t3 : 00007fffe165d070 t4 : 00000000000965d0 [12797.990656] t5 : fefefefefefefeff t6 : 0000000000000073 [12797.990756] status: 0000000200004020 badaddr: 000000000008ef61 cause: 0000000000000006 [12797.990911] Code: 8793 8791 3423 fcf4 3783 fc84 c737 dead 0713 eef7 (c398) 0001 # OK global.gen_sigbus ok 23 global.gen_sigbus # PASSED: 23 / 23 tests passed. # Totals: pass:23 fail:0 xfail:0 xpass:0 skip:0 error:0 With kvm-tools: # lkvm run -k sbi.flat -m 128 Info: # lkvm run -k sbi.flat -m 128 -c 1 --name guest-97 Info: Removed ghost socket file "/root/.lkvm//guest-97.sock". ########################################################################## # kvm-unit-tests ########################################################################## ... [test messages elided] PASS: sbi: fwft: FWFT extension probing no error PASS: sbi: fwft: get/set reserved feature 0x6 error == SBI_ERR_DENIED PASS: sbi: fwft: get/set reserved feature 0x3fffffff error == SBI_ERR_DENIED PASS: sbi: fwft: get/set reserved feature 0x80000000 error == SBI_ERR_DENIED PASS: sbi: fwft: get/set reserved feature 0xbfffffff error == SBI_ERR_DENIED PASS: sbi: fwft: misaligned_deleg: Get misaligned deleg feature no error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature invalid value error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature invalid value error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value no error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value 0 PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value no error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value 1 PASS: sbi: fwft: misaligned_deleg: Verify misaligned load exception trap in supervisor SUMMARY: 50 tests, 2 unexpected failures, 12 skipped This series is available at [5]. [Palmer: slighyt commit text modification, as SBI-3.0 is merged now. Also drop the KVM patches, as they're too late.] * b4-shazam-merge: riscv: misaligned: add a function to check misalign trap delegability riscv: misaligned: move emulated access uniformity check in a function riscv: misaligned: declare misaligned_access_speed under CONFIG_RISCV_MISALIGNED riscv: misaligned: use on_each_cpu() for scalar misaligned access probing riscv: misaligned: request misaligned exception from SBI riscv: sbi: add SBI FWFT extension calls riscv: sbi: add FWFT extension interface riscv: sbi: add new SBI error mappings riscv: sbi: remove useless parenthesis riscv: sbi: add Firmware Feature (FWFT) SBI extensions definitions Link: https://lore.kernel.org/r/20250523101932.1594077-1-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05Merge patch series "riscv: misaligned: fix misaligned accesses handling in ↵Palmer Dabbelt
put/get_user()" Clément Léger <cleger@rivosinc.com> says: While debugging a few problems with the misaligned access kselftest, Alexandre discovered some crash with the current code. Indeed, some misaligned access was done by the kernel using put_user(). This was resulting in trap and a kernel crash since. The path was the following: user -> kernel -> access to user memory -> misaligned trap -> trap -> kernel -> misaligned handling -> memcpy -> crash due to failed page fault while in interrupt disabled section. Last discussion about kernel misaligned handling and interrupt reenabling were actually not to reenable interrupt when handling misaligned access being done by kernel. The best solution being not to do any misaligned accesses to userspace memory, we considered a few options: - Remove any call to put/get_user() potentially doing misaligned accesses - Do not do any misaligned accesses in put/get_user() itself The second solution was the one chosen as there are too many callsites to put/get_user() that could potentially do misaligned accesses. We tried two approaches for that, either split access in two aligned accesses (and do RMW for put_user()) or call copy_from/to_user() which does not do any misaligned accesses. The later one was the simpler to implement (although the performances are probably lower than split aligned accesses but still way better than doing misaligned access emulation) and allows to support what we wanted. These commits are based on top of Alex dev/alex/get_user_misaligned_v1 branch. [Palmer: No idea what that branch is, so I'm basing it on the uaccess optimizations patch series which is the last thing to touch these.] * b4-shazam-merge riscv: uaccess: do not do misaligned accesses in get/put_user() riscv: process: use unsigned int instead of unsigned long for put_user() riscv: make unsafe user copy routines use existing assembly routines Link: https://lore.kernel.org/r/20250602193918.868962-1-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05riscv: uaccess: Only restore the CSR_STATUS SUM bitCyril Bur
During switch to csrs will OR the value of the register into the corresponding csr. In this case we're only interested in restoring the SUM bit not the entire register. Signed-off-by: Cyril Bur <cyrilbur@tenstorrent.com> Link: https://lore.kernel.org/r/20250522160954.429333-1-cyrilbur@tenstorrent.com Co-developed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Fixes: 788aa64c01f1 ("riscv: save the SR_SUM status over switches") Link: https://lore.kernel.org/r/20250602121543.1544278-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05Merge tag 'riscv-mw2-6.16-rc1' of ↵Palmer Dabbelt
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next riscv patches for 6.16-rc1, part 2 * Performance improvements - Add support for vdso getrandom - Implement raid6 calculations using vectors - Introduce svinval tlb invalidation * Cleanup - A bunch of deduplication of the macros we use for manipulating instructions * Misc - Introduce a kunit test for kprobes - Add support for mseal as riscv fits the requirements (thanks to Lorenzo for making sure of that :)) [Palmer: There was a rebase between part 1 and part 2, so I've had to do some more git surgery here... at least two rounds of surgery...] * alex-pr-2: (866 commits) RISC-V: vDSO: Wire up getrandom() vDSO implementation riscv: enable mseal sysmap for RV64 raid6: Add RISC-V SIMD syndrome and recovery calculations riscv: mm: Add support for Svinval extension riscv: Add kprobes KUnit test riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM riscv: kprobes: Remove duplication of RV_EXTRACT_UTYPE_IMM riscv: kprobes: Remove duplication of RV_EXTRACT_RD_REG riscv: kprobes: Remove duplication of RVC_EXTRACT_BTYPE_IMM riscv: kprobes: Remove duplication of RVC_EXTRACT_C2_RS1_REG riscv: kproves: Remove duplication of RVC_EXTRACT_JTYPE_IMM riscv: kprobes: Remove duplication of RV_EXTRACT_BTYPE_IMM riscv: kprobes: Remove duplication of RV_EXTRACT_RS1_REG riscv: kprobes: Remove duplication of RV_EXTRACT_JTYPE_IMM riscv: kprobes: Move branch_funct3 to insn.h riscv: kprobes: Move branch_rs2_idx to insn.h Linux 6.15-rc6 Input: xpad - fix xpad_device sorting Input: xpad - add support for several more controllers Input: xpad - fix Share button on Xbox One controllers ...
2025-06-05RISC-V: vDSO: Wire up getrandom() vDSO implementationXi Ruoyao
Hook up the generic vDSO implementation to the generic vDSO getrandom implementation by providing the required __arch_chacha20_blocks_nostack and getrandom_syscall implementations. Also wire up the selftests. The benchmark result: vdso: 25000000 times in 2.466341333 seconds libc: 25000000 times in 41.447720005 seconds syscall: 25000000 times in 41.043926672 seconds vdso: 25000000 x 256 times in 162.286219353 seconds libc: 25000000 x 256 times in 2953.855018685 seconds syscall: 25000000 x 256 times in 2796.268546000 seconds [ alex: - Fix dynamic relocation - Squash Nathan's fix https://lore.kernel.org/all/20250423-riscv-fix-compat_vdso-lld-v2-1-b7bbbc244501@kernel.org/ - Add comment from Loongarch ] Signed-off-by: Xi Ruoyao <xry111@xry111.site> Link: https://lore.kernel.org/r/20250411024600.16045-1-xry111@xry111.site Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05riscv: enable mseal sysmap for RV64Jisheng Zhang
Provide support for CONFIG_MSEAL_SYSTEM_MAPPINGS for RV64, covering the vdso, vvar. Passed sysmap_is_sealed and mseal_test self tests. Passed booting a buildroot rootfs image and a cli debian rootfs image. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Cc: Jeff Xu <jeffxu@chromium.org> Link: https://lore.kernel.org/r/20250426135954.5614-1-jszhang@kernel.org Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05Merge tag 'riscv-mw1-6.16-rc1' of ↵Palmer Dabbelt
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next riscv patches for 6.16-rc1 * Implement atomic patching support for ftrace which finally allows to get rid of stop_machine(). * Support for kexec_file_load() syscall * Improve module loading time by changing the algorithm that counts the number of plt/got entries in a module. * Zicbop is now used in the kernel to prefetch instructions [Palmer: There's been two rounds of surgery on this one, so as a result it's a bit different than the PR.] * alex-pr: (734 commits) riscv: Improve Kconfig help for RISCV_ISA_V_PREEMPTIVE MAINTAINERS: Update Atish's email address riscv: hwprobe: export Zabha extension riscv: Make regs_irqs_disabled() more clear perf symbols: Ignore mapping symbols on riscv RISC-V: Kconfig: Fix help text of CMDLINE_EXTEND riscv: module: Optimize PLT/GOT entry counting riscv: Add support for PUD THP riscv: xchg: Prefetch the destination word for sc.w riscv: Add ARCH_HAS_PREFETCH[W] support with Zicbop riscv: Add support for Zicbop riscv: Introduce Zicbop instructions riscv/kexec_file: Fix comment in purgatory relocator riscv: kexec_file: Support loading Image binary file riscv: kexec_file: Split the loading of kernel and others riscv: Documentation: add a description about dynamic ftrace riscv: ftrace: support direct call using call_ops riscv: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS riscv: ftrace: support PREEMPT riscv: add a data fence for CMODX in the kernel mode ... Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05Merge patch series "riscv: Add Zicbop & prefetchw support"Alexandre Ghiti
Alexandre Ghiti <alexghiti@rivosinc.com> says: I found this lost series developed by Guo so here is a respin with the comments on v2 applied. This patch series adds Zicbop support and then enables the Linux prefetch features. * patches from https://lore.kernel.org/r/20250421142441.395849-1-alexghiti@rivosinc.com: riscv: xchg: Prefetch the destination word for sc.w riscv: Add ARCH_HAS_PREFETCH[W] support with Zicbop riscv: Add support for Zicbop riscv: Introduce Zicbop instructions Link: https://lore.kernel.org/r/20250421142441.395849-1-alexghiti@rivosinc.com Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05riscv: process: use unsigned int instead of unsigned long for put_user()Clément Léger
The specification of prctl() for GET_UNALIGN_CTL states that the value is returned in an unsigned int * address passed as an unsigned long. Change the type to match that and avoid an unaligned access as well. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20250602193918.868962-3-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05riscv: hwprobe: export Zabha extensionAlexandre Ghiti
Export Zabha through the hwprobe syscall. Reviewed-by: Clément Léger <cleger@rivosinc.com> Link: https://lore.kernel.org/r/20250421141413.394444-1-alexghiti@rivosinc.com Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05Merge patch series "riscv: kexec_file: Support loading Image binary file"Palmer Dabbelt
Björn Töpel <bjorn@kernel.org> says: From: Björn Töpel <bjorn@rivosinc.com> Hi! For over a year ago, Daniel and I was testing the V2 of Song's series. I also promised to take the V2, that had been sitting on the lists for too long, to rebase it on a new kernel, and re-test it. One year later, here's the V3! ;-) There are no changes from V2 other, than some simple checkpatch cleanups. Song's original cover: | This series makes the kexec_file_load() syscall support to load | Image binary file. At the same time, corresponding support for | kexec-tools had been pushed to my repo[2]. | | Now, we can leverage that kexec-tools and this series to use the | kexec_load() or kexec_file_load() syscall to boot both vmlinux and | Image file, as seen in these combo tests: | | ``` | 1. kexec -l vmlinux | 2. kexec -l Image | 3. kexec -s -l vmlinux | 4. kexec -s -l Image | ``` Notably, kexec-tools has still not made it upstream. I've prepared a branch on my GH [3], that I indend to post ASAP. That branch is a collection of fixes/features, including Song's userland Image loading. The V2 is here [2], and V1 [1]. I've tested the kexec-file/Image on qemu-rv64, with following combinations: * ACPI/UEFI * DT/UEFI * DT both "regular" kexec (-s + -e), and crashkernels (-p). Note that there are two purgatory patches that has to be present (part of -rc1, so all good): commit 28093cfef5dd ("riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator") commit 3f7023171df4 ("riscv/purgatory: 4B align purgatory_start") [1] https://lore.kernel.org/linux-riscv/20230914020044.1397356-1-songshuaishuai@tinylab.org/ [2] https://lore.kernel.org/linux-riscv/20231016092006.3347632-1-songshuaishuai@tinylab.org/ [3] https://github.com/bjoto/kexec-tools/tree/rv-on-master * patches from https://lore.kernel.org/r/20250409193004.643839-1-bjorn@kernel.org: riscv: kexec_file: Support loading Image binary file riscv: kexec_file: Split the loading of kernel and others Link: https://lore.kernel.org/r/20250409193004.643839-1-bjorn@kernel.org Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05riscv: module: Optimize PLT/GOT entry countingSamuel Holland
perf reports that 99.63% of the cycles from `modprobe amdgpu` are spent inside module_frob_arch_sections(). This is because amdgpu.ko contains about 300000 relocations in its .rela.text section, and the algorithm in count_max_entries() takes quadratic time. Apply two optimizations from the arm64 code, which together reduce the total execution time by 99.58%. First, sort the relocations so duplicate entries are adjacent. Second, reduce the number of relocations that must be sorted by filtering to only relocations that need PLT/GOT entries, as done in commit d4e0340919fb ("arm64/module: Optimize module load time by optimizing PLT counting"). Unlike the arm64 code, here the filtering and sorting is done in a scratch buffer, because the HI20 relocation search optimization in apply_relocate_add() depends on the original order of the relocations. This allows accumulating PLT/GOT relocations across sections so sorting and counting is only done once per module. Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20250409171526.862481-3-samuel.holland@sifive.com Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05Merge patch series "riscv: ftrace: atmoic patching and preempt improvements"Alexandre Ghiti
Andy Chiu <andybnac@gmail.com> says: This series makes atomic code patching in ftrace possible and eliminates the need of the stop_machine dance. The major difference of this version is that we merge the CALL_OPS support from Puranjay [1] and make direct calls available for practical uses such as BPF. Thanks for the time reviewing the series and suggestions, we hope this version gets a step closer to happening in the upstream. Please reference the link to v3 below for more introductory view of the implementation [2] Added patch: 2, 4, 10, 11, 12 Modified patch: 5, 6 Unchanged patch: 1, 3, 7, 8, 9 (1, 8 has commit msg modified) Special thanks to Björn for his efforts on testing and guiding the series! [1]: https://lore.kernel.org/lkml/20240306165904.108141-1-puranjay12@gmail.com/ [2]: https://lore.kernel.org/linux-riscv/20241127172908.17149-1-andybnac@gmail.com/ * patches from https://lore.kernel.org/r/20250407180838.42877-1-andybnac@gmail.com: riscv: Documentation: add a description about dynamic ftrace riscv: ftrace: support direct call using call_ops riscv: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS riscv: ftrace: support PREEMPT riscv: add a data fence for CMODX in the kernel mode riscv: vector: Support calling schedule() for preemptible Vector riscv: ftrace: do not use stop_machine to update code riscv: ftrace: prepare ftrace for atomic code patching kernel: ftrace: export ftrace_sync_ipi riscv: ftrace: align patchable functions to 4 Byte boundary riscv: ftrace factor out code defined by !WITH_ARG riscv: ftrace: support fastcc in Clang for WITH_ARGS Link: https://lore.kernel.org/r/20250407180838.42877-1-andybnac@gmail.com Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
2025-06-05riscv: Add support for ZicbopAlexandre Ghiti
Zicbop introduces cache blocks prefetching instructions, add the necessary support for the kernel to use it in the coming commits. Co-developed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Guo Ren <guoren@kernel.org> Tested-by: Andrea Parri <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20250421142441.395849-3-alexghiti@rivosinc.com Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05riscv/kexec_file: Fix comment in purgatory relocatorYao Zi
Apparently sec_base doesn't mean relocated symbol value, which seems a copy-pasting error in the comment. Assigned with the address of section indexed by sym->st_shndx, it should represent base address of the relevant section. Let's fix the comment to avoid possible confusion. Fixes: 838b3e28488f ("RISC-V: Load purgatory in kexec_file") Signed-off-by: Yao Zi <ziyao@disroot.org> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20250326073450.57648-2-ziyao@disroot.org Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05riscv: kexec_file: Support loading Image binary fileSong Shuai
This patch creates image_kexec_ops to load Image binary file for kexec_file_load() syscall. Signed-off-by: Song Shuai <songshuaishuai@tinylab.org> Signed-off-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20250409193004.643839-3-bjorn@kernel.org Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05riscv: kexec_file: Split the loading of kernel and othersSong Shuai
This is the preparative patch for kexec_file_load Image support. It separates the elf_kexec_load() as two parts: - the first part loads the vmlinux (or Image) - the second part loads other segments (e.g. initrd,fdt,purgatory) And the second part is exported as the load_extra_segments() function which would be used in both kexec-elf.c and kexec-image.c. No functional change intended. Signed-off-by: Song Shuai <songshuaishuai@tinylab.org> Signed-off-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20250409193004.643839-2-bjorn@kernel.org Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05riscv: ftrace: support direct call using call_opsAndy Chiu
jump to FTRACE_ADDR if distance is out of reach Co-developed-by: Björn Töpel <bjorn@rivosinc.com> Signed-off-by: Björn Töpel <bjorn@rivosinc.com> Signed-off-by: Andy Chiu <andybnac@gmail.com> Link: https://lore.kernel.org/r/20250407180838.42877-11-andybnac@gmail.com Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05riscv: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPSPuranjay Mohan
This patch enables support for DYNAMIC_FTRACE_WITH_CALL_OPS on RISC-V. This allows each ftrace callsite to provide an ftrace_ops to the common ftrace trampoline, allowing each callsite to invoke distinct tracer functions without the need to fall back to list processing or to allocate custom trampolines for each callsite. This significantly speeds up cases where multiple distinct trace functions are used and callsites are mostly traced by a single tracer. The idea and most of the implementation is taken from the ARM64's implementation of the same feature. The idea is to place a pointer to the ftrace_ops as a literal at a fixed offset from the function entry point, which can be recovered by the common ftrace trampoline. We use -fpatchable-function-entry to reserve 8 bytes above the function entry by emitting 2 4 byte or 4 2 byte nops depending on the presence of CONFIG_RISCV_ISA_C. These 8 bytes are patched at runtime with a pointer to the associated ftrace_ops for that callsite. Functions are aligned to 8 bytes to make sure that the accesses to this literal are atomic. This approach allows for directly invoking ftrace_ops::func even for ftrace_ops which are dynamically-allocated (or part of a module), without going via ftrace_ops_list_func. We've benchamrked this with the ftrace_ops sample module on Spacemit K1 Jupiter: Without this patch: baseline (Linux rivos 6.14.0-09584-g7d06015d936c #3 SMP Sat Mar 29 +-----------------------+-----------------+----------------------------+ | Number of tracers | Total time (ns) | Per-call average time | |-----------------------+-----------------+----------------------------| | Relevant | Irrelevant | 100000 calls | Total (ns) | Overhead (ns) | |----------+------------+-----------------+------------+---------------| | 0 | 0 | 1357958 | 13 | - | | 0 | 1 | 1302375 | 13 | - | | 0 | 2 | 1302375 | 13 | - | | 0 | 10 | 1379084 | 13 | - | | 0 | 100 | 1302458 | 13 | - | | 0 | 200 | 1302333 | 13 | - | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 13677833 | 136 | 123 | | 1 | 1 | 18500916 | 185 | 172 | | 1 | 2 | 22856459 | 228 | 215 | | 1 | 10 | 58824709 | 588 | 575 | | 1 | 100 | 505141584 | 5051 | 5038 | | 1 | 200 | 1580473126 | 15804 | 15791 | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 13561000 | 135 | 122 | | 2 | 0 | 19707292 | 197 | 184 | | 10 | 0 | 67774750 | 677 | 664 | | 100 | 0 | 714123125 | 7141 | 7128 | | 200 | 0 | 1918065668 | 19180 | 19167 | +----------+------------+-----------------+------------+---------------+ Note: per-call overhead is estimated relative to the baseline case with 0 relevant tracers and 0 irrelevant tracers. With this patch: v4-rc4 (Linux rivos 6.14.0-09598-gd75747611c93 #4 SMP Sat Mar 29 +-----------------------+-----------------+----------------------------+ | Number of tracers | Total time (ns) | Per-call average time | |-----------------------+-----------------+----------------------------| | Relevant | Irrelevant | 100000 calls | Total (ns) | Overhead (ns) | |----------+------------+-----------------+------------+---------------| | 0 | 0 | 1459917 | 14 | - | | 0 | 1 | 1408000 | 14 | - | | 0 | 2 | 1383792 | 13 | - | | 0 | 10 | 1430709 | 14 | - | | 0 | 100 | 1383791 | 13 | - | | 0 | 200 | 1383750 | 13 | - | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 5238041 | 52 | 38 | | 1 | 1 | 5228542 | 52 | 38 | | 1 | 2 | 5325917 | 53 | 40 | | 1 | 10 | 5299667 | 52 | 38 | | 1 | 100 | 5245250 | 52 | 39 | | 1 | 200 | 5238459 | 52 | 39 | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 5239083 | 52 | 38 | | 2 | 0 | 19449417 | 194 | 181 | | 10 | 0 | 67718584 | 677 | 663 | | 100 | 0 | 709840708 | 7098 | 7085 | | 200 | 0 | 2203580626 | 22035 | 22022 | +----------+------------+-----------------+------------+---------------+ Note: per-call overhead is estimated relative to the baseline case with 0 relevant tracers and 0 irrelevant tracers. As can be seen from the above: a) Whenever there is a single relevant tracer function associated with a tracee, the overhead of invoking the tracer is constant, and does not scale with the number of tracers which are *not* associated with that tracee. b) The overhead for a single relevant tracer has dropped to ~1/3 of the overhead prior to this series (from 122ns to 38ns). This is largely due to permitting calls to dynamically-allocated ftrace_ops without going through ftrace_ops_list_func. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> [update kconfig, asm, refactor] Signed-off-by: Andy Chiu <andybnac@gmail.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20250407180838.42877-10-andybnac@gmail.com Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05riscv: ftrace: do not use stop_machine to update codeAndy Chiu
Now it is safe to remove dependency from stop_machine() for us to patch code in ftrace. Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Link: https://lore.kernel.org/r/20250407180838.42877-6-andybnac@gmail.com Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05riscv: ftrace: prepare ftrace for atomic code patchingAndy Chiu
We use an AUIPC+JALR pair to jump into a ftrace trampoline. Since instruction fetch can break down to 4 byte at a time, it is impossible to update two instructions without a race. In order to mitigate it, we initialize the patchable entry to AUIPC + NOP4. Then, the run-time code patching can change NOP4 to JALR to eable/disable ftrcae from a function. This limits the reach of each ftrace entry to +-2KB displacing from ftrace_caller. Starting from the trampoline, we add a level of indirection for it to reach ftrace caller target. Now, it loads the target address from a memory location, then perform the jump. This enable the kernel to update the target atomically. The new don't-stop-the-world text patching on change only one RISC-V instruction: | -8: &ftrace_ops of the associated tracer function. | <ftrace enable>: | 0: auipc t0, hi(ftrace_caller) | 4: jalr t0, lo(ftrace_caller) | | -8: &ftrace_nop_ops | <ftrace disable>: | 0: auipc t0, hi(ftrace_caller) | 4: nop This means that f+0x0 is fixed, and should not be claimed by ftrace, e.g. kprobe should be able to put a probe in f+0x0. Thus, we adjust the offset and MCOUNT_INSN_SIZE accordingly. [ alex: Fix build errors with !CONFIG_DYNAMIC_FTRACE ] Co-developed-by: Björn Töpel <bjorn@rivosinc.com> Signed-off-by: Björn Töpel <bjorn@rivosinc.com> Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Link: https://lore.kernel.org/r/20250407180838.42877-5-andybnac@gmail.com Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05riscv: ftrace factor out code defined by !WITH_ARGAndy Chiu
DYNAMIC_FTRACE selects DYNAMIC_FTRACE_WITH_ARGS and mcount-dyn.S in riscv, so we can remove ifdef jargons of WITH_ARG when it is known that DYNAMIC_FTRACE is true. Signed-off-by: Andy Chiu <andybnac@gmail.com> Link: https://lore.kernel.org/r/20250407180838.42877-2-andybnac@gmail.com Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-05riscv: ftrace: support fastcc in Clang for WITH_ARGSAndy Chiu
Some caller-saved registers which are not defined as function arguments in the ABI can still be passed as arguments when the kernel is compiled with Clang. As a result, we must save and restore those registers to prevent ftrace from clobbering them. - [1]: https://reviews.llvm.org/D68559 Reported-by: Evgenii Shatokhin <e.shatokhin@yadro.com> Closes: https://lore.kernel.org/linux-riscv/7e7c7914-445d-426d-89a0-59a9199c45b1@yadro.com/ Fixes: 7caa9765465f ("ftrace: riscv: move from REGS to ARGS") Acked-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20250407180838.42877-1-andybnac@gmail.com Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-04riscv: misaligned: add a function to check misalign trap delegabilityClément Léger
Checking for the delegability of the misaligned access trap is needed for the KVM FWFT extension implementation. Add a function to get the delegability of the misaligned trap exception. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Tested-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20250523101932.1594077-11-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-04riscv: misaligned: move emulated access uniformity check in a functionClément Léger
Split the code that check for the uniformity of misaligned accesses performance on all cpus from check_unaligned_access_emulated_all_cpus() to its own function which will be used for delegation check. No functional changes intended. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Tested-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20250523101932.1594077-10-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-04riscv: misaligned: declare misaligned_access_speed under CONFIG_RISCV_MISALIGNEDClément Léger
While misaligned_access_speed was defined in a file compile with CONFIG_RISCV_MISALIGNED, its definition was under CONFIG_RISCV_SCALAR_MISALIGNED. This resulted in compilation problems when using it in a file compiled with CONFIG_RISCV_MISALIGNED. Move the declaration under CONFIG_RISCV_MISALIGNED so that it can be used unconditionnally when compiled with that config and remove the check for that variable in traps_misaligned.c. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Tested-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20250523101932.1594077-9-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-04riscv: misaligned: use on_each_cpu() for scalar misaligned access probingClément Léger
schedule_on_each_cpu() was used without any good reason while documented as very slow. This call was in the boot path, so better use on_each_cpu() for scalar misaligned checking. Vector misaligned check still needs to use schedule_on_each_cpu() since it requires irqs to be enabled but that's less of a problem since this code is ran in a kthread. Add a comment to explicit that. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Tested-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20250523101932.1594077-8-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-04riscv: misaligned: request misaligned exception from SBIClément Léger
Now that the kernel can handle misaligned accesses in S-mode, request misaligned access exception delegation from SBI. This uses the FWFT SBI extension defined in SBI version 3.0. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20250523101932.1594077-7-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-04riscv: sbi: add SBI FWFT extension callsClément Léger
Add FWFT extension calls. This will be ratified in SBI V3.0 hence, it is provided as a separate commit that can be left out if needed. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20250523101932.1594077-6-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-04riscv: sbi: add FWFT extension interfaceClément Léger
This SBI extensions enables supervisor mode to control feature that are under M-mode control (For instance, Svadu menvcfg ADUE bit, Ssdbltrp DTE, etc). Add an interface to set local features for a specific cpu mask as well as for the online cpu mask. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20250523101932.1594077-5-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-04riscv: sbi: remove useless parenthesisClément Léger
A few parenthesis in check for SBI version/extension were useless, remove them. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20250523101932.1594077-3-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-06-02Revert "RISC-V: vDSO: Wire up getrandom() vDSO implementation"Palmer Dabbelt
This has been on -next for a bit, but it's broken and there's already a v2. So I'm reverting it to avoid more rebasing. This reverts commit 89079520cef65d6da1e864eab4464effe5396e23. Link: https://lore.kernel.org/r/20250602173315.20228-1-palmer@dabbelt.com Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2025-05-30Merge tag 'efi-next-for-v6.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI updates from Ard Biesheuvel: "Not a lot going on in the EFI tree this cycle. The only thing that stands out is the new support for SBAT metadata, which was a bit contentious when it was first proposed, because in the initial incarnation, it would have required us to maintain a revocation index, and bump it each time a vulnerability affecting UEFI secure boot got fixed. This was shot down for obvious reasons. This time, only the changes needed to emit the SBAT section into the PE/COFF image are being carried upstream, and it is up to the distros to decide what to put in there when creating and signing the build. This only has the EFI zboot bits (which the distros will be using for arm64); the x86 bzImage changes should be arriving next cycle, presumably via the -tip tree. Summary: - Add support for emitting a .sbat section into the EFI zboot image, so that downstreams can easily include revocation metadata in the signed EFI images - Align PE symbolic constant names with other projects - Bug fix for the efi_test module - Log the physical address and size of the EFI memory map when failing to map it - A kerneldoc fix for the EFI stub code" * tag 'efi-next-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: include: pe.h: Fix PE definitions efi/efi_test: Fix missing pending status update in getwakeuptime efi: zboot specific mechanism for embedding SBAT section efi/libstub: Describe missing 'out' parameter in efi_load_initrd efi: Improve logging around memmap init
2025-05-29Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm updates from Paolo Bonzini: "As far as x86 goes this pull request "only" includes TDX host support. Quotes are appropriate because (at 6k lines and 100+ commits) it is much bigger than the rest, which will come later this week and consists mostly of bugfixes and selftests. s390 changes will also come in the second batch. ARM: - Add large stage-2 mapping (THP) support for non-protected guests when pKVM is enabled, clawing back some performance. - Enable nested virtualisation support on systems that support it, though it is disabled by default. - Add UBSAN support to the standalone EL2 object used in nVHE/hVHE and protected modes. - Large rework of the way KVM tracks architecture features and links them with the effects of control bits. While this has no functional impact, it ensures correctness of emulation (the data is automatically extracted from the published JSON files), and helps dealing with the evolution of the architecture. - Significant changes to the way pKVM tracks ownership of pages, avoiding page table walks by storing the state in the hypervisor's vmemmap. This in turn enables the THP support described above. - New selftest checking the pKVM ownership transition rules - Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests even if the host didn't have it. - Fixes for the address translation emulation, which happened to be rather buggy in some specific contexts. - Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N from the number of counters exposed to a guest and addressing a number of issues in the process. - Add a new selftest for the SVE host state being corrupted by a guest. - Keep HCR_EL2.xMO set at all times for systems running with the kernel at EL2, ensuring that the window for interrupts is slightly bigger, and avoiding a pretty bad erratum on the AmpereOne HW. - Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers from a pretty bad case of TLB corruption unless accesses to HCR_EL2 are heavily synchronised. - Add a per-VM, per-ITS debugfs entry to dump the state of the ITS tables in a human-friendly fashion. - and the usual random cleanups. LoongArch: - Don't flush tlb if the host supports hardware page table walks. - Add KVM selftests support. RISC-V: - Add vector registers to get-reg-list selftest - VCPU reset related improvements - Remove scounteren initialization from VCPU reset - Support VCPU reset from userspace using set_mpstate() ioctl x86: - Initial support for TDX in KVM. This finally makes it possible to use the TDX module to run confidential guests on Intel processors. This is quite a large series, including support for private page tables (managed by the TDX module and mirrored in KVM for efficiency), forwarding some TDVMCALLs to userspace, and handling several special VM exits from the TDX module. This has been in the works for literally years and it's not really possible to describe everything here, so I'll defer to the various merge commits up to and including commit 7bcf7246c42a ('Merge branch 'kvm-tdx-finish-initial' into HEAD')" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (248 commits) x86/tdx: mark tdh_vp_enter() as __flatten Documentation: virt/kvm: remove unreferenced footnote RISC-V: KVM: lock the correct mp_state during reset KVM: arm64: Fix documentation for vgic_its_iter_next() KVM: arm64: np-guest CMOs with PMD_SIZE fixmap KVM: arm64: Stage-2 huge mappings for np-guests KVM: arm64: Add a range to pkvm_mappings KVM: arm64: Convert pkvm_mappings to interval tree KVM: arm64: Add a range to __pkvm_host_test_clear_young_guest() KVM: arm64: Add a range to __pkvm_host_wrprotect_guest() KVM: arm64: Add a range to __pkvm_host_unshare_guest() KVM: arm64: Add a range to __pkvm_host_share_guest() KVM: arm64: Introduce for_each_hyp_page KVM: arm64: Handle huge mappings for np-guest CMOs KVM: arm64: nv: Release faulted-in VNCR page from mmu_lock critical section KVM: arm64: nv: Handle TLBI S1E2 for VNCR invalidation with mmu_lock held KVM: arm64: nv: Hold mmu_lock when invalidating VNCR SW-TLB before translating RISC-V: KVM: add KVM_CAP_RISCV_MP_STATE_RESET RISC-V: KVM: Remove scounteren initialization KVM: RISC-V: remove unnecessary SBI reset state ...
2025-05-27Merge tag 'core-entry-2025-05-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core entry code updates from Thomas Gleixner: "Updates for the generic and architecture entry code: - Move LoongArch and RISC-V ret_from_fork() implementations to C code so that syscall_exit_user_mode() can be inlined - Split the RISC-V ret_from_fork() implementation into return to user and return to kernel, which gives a measurable performance improvement - Inline syscall_exit_user_mode() which benefits all architectures by avoiding a function call and letting the compiler do better optimizations" * tag 'core-entry-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: LoongArch: entry: Fix include order entry: Inline syscall_exit_to_user_mode() LoongArch: entry: Migrate ret_from_fork() to C riscv: entry: Split ret_from_fork() into user and kernel riscv: entry: Convert ret_from_fork() to C
2025-05-26Merge tag 'kvm-riscv-6.16-1' of https://github.com/kvm-riscv/linux into HEADPaolo Bonzini
KVM/riscv changes for 6.16 - Add vector registers to get-reg-list selftest - VCPU reset related improvements - Remove scounteren initialization from VCPU reset - Support VCPU reset from userspace using set_mpstate() ioctl
2025-05-21include: pe.h: Fix PE definitionsPali Rohár
* Rename constants to their standard PE names: - MZ_MAGIC -> IMAGE_DOS_SIGNATURE - PE_MAGIC -> IMAGE_NT_SIGNATURE - PE_OPT_MAGIC_PE32_ROM -> IMAGE_ROM_OPTIONAL_HDR_MAGIC - PE_OPT_MAGIC_PE32 -> IMAGE_NT_OPTIONAL_HDR32_MAGIC - PE_OPT_MAGIC_PE32PLUS -> IMAGE_NT_OPTIONAL_HDR64_MAGIC - IMAGE_DLL_CHARACTERISTICS_NX_COMPAT -> IMAGE_DLLCHARACTERISTICS_NX_COMPAT * Import constants and their description from readpe and file projects which contains current up-to-date information: - IMAGE_FILE_MACHINE_* - IMAGE_FILE_* - IMAGE_SUBSYSTEM_* - IMAGE_DLLCHARACTERISTICS_* - IMAGE_DLLCHARACTERISTICS_EX_* - IMAGE_DEBUG_TYPE_* * Add missing IMAGE_SCN_* constants and update their incorrect description * Fix incorrect value of IMAGE_SCN_MEM_PURGEABLE constant * Add description for win32_version and loader_flags PE fields Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2025-05-21RISC-V: KVM: Remove scounteren initializationAtish Patra
Scounteren CSR controls the direct access the hpmcounters and cycle/ instret/time from the userspace. It's the supervisor's responsibility to set it up correctly for it's user space. They hypervisor doesn't need to decide the policy on behalf of the supervisor. Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20250515-fix_scounteren_vs-v3-1-729dc088943e@rivosinc.com Signed-off-by: Anup Patel <anup@brainfault.org>
2025-05-08Merge patch series "riscv: Add vendor extensions support for SiFive"Palmer Dabbelt
Cyan Yang <cyan.yang@sifive.com> says: This patch set adds four vendor-specific ISA extensions from SiFive: "xsfvqmaccdod", "xsfvqmaccqoq", "xsfvfnrclipxfqf", and "xsfvfwmaccqqq". Additionally, a new hwprobe key, RISCV_HWPROBE_KEY_VENDOR_EXT_SIFIVE_0, has been added to query which SiFive vendor extensions are supported on the current platform. Signed-off-by: Cyan Yang <cyan.yang@sifive.com> Link: https://lore.kernel.org/r/20250418053239.4351-1-cyan.yang@sifive.com * b4-shazam-merge: riscv: hwprobe: Add SiFive xsfvfwmaccqqq vendor extension riscv: hwprobe: Document SiFive xsfvfwmaccqqq vendor extension riscv: Add SiFive xsfvfwmaccqqq vendor extension dt-bindings: riscv: Add xsfvfwmaccqqq ISA extension description riscv: hwprobe: Add SiFive xsfvfnrclipxfqf vendor extension riscv: hwprobe: Document SiFive xsfvfnrclipxfqf vendor extension riscv: Add SiFive xsfvfnrclipxfqf vendor extension dt-bindings: riscv: Add xsfvfnrclipxfqf ISA extension description riscv: hwprobe: Add SiFive vendor extension support and probe for xsfqmaccdod and xsfqmaccqoq riscv: hwprobe: Document SiFive xsfvqmaccdod and xsfvqmaccqoq vendor extensions riscv: Add SiFive xsfvqmaccdod and xsfvqmaccqoq vendor extensions dt-bindings: riscv: Add xsfvqmaccdod and xsfvqmaccqoq ISA extension description Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2025-05-08riscv: hwprobe: Add SiFive xsfvfwmaccqqq vendor extensionCyan Yang
Add hwprobe for SiFive "xsfvfwmaccqqq" vendor extension. Signed-off-by: Cyan Yang <cyan.yang@sifive.com> Link: https://lore.kernel.org/r/20250418053239.4351-13-cyan.yang@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2025-05-08riscv: Add SiFive xsfvfwmaccqqq vendor extensionCyan Yang
Add SiFive vendor extension "xsfvfwmaccqqq" support to the kernel. Signed-off-by: Cyan Yang <cyan.yang@sifive.com> Link: https://lore.kernel.org/r/20250418053239.4351-11-cyan.yang@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2025-05-08riscv: hwprobe: Add SiFive xsfvfnrclipxfqf vendor extensionCyan Yang
Add hwprobe for SiFive "xsfvfnrclipxfqf" vendor extension. Signed-off-by: Cyan Yang <cyan.yang@sifive.com> Link: https://lore.kernel.org/r/20250418053239.4351-9-cyan.yang@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
generated by cgit (git 2.34.1) at 2025-07-15 10:49:26 +0000