| Age | Commit message (Collapse) | Author |
|---|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC driver updates from Arnd Bergmann:
"This is the promised follow-up to the soc drivers branch, adding minor
updates to omap and freescale drivers.
Most notably, Ioana Ciornei takes over maintenance of the DPAA bus
driver used in some NXP (originally Freescale) chips"
* tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
bus: fsl-mc: Remove deadcode
MAINTAINERS: add the linuppc-dev list to the fsl-mc bus entry
MAINTAINERS: fix nonexistent dtbinding file name
MAINTAINERS: add myself as maintainer for the fsl-mc bus
irqdomain: soc: Switch to irq_find_mapping()
Input: tsc2007 - accept standard properties
|
|
soc/drivers-2
FSL SOC Changes for 6.15:
- irqdomain cleanups from Jiry
- Add Ioana as Maintainer of fsl-mc bus and remove Laurentiu and Stuart
- Remove deadcode from fsl-mc bus
* tag 'soc_fsl-6.15-1' of https://github.com/chleroy/linux:
bus: fsl-mc: Remove deadcode
MAINTAINERS: add the linuppc-dev list to the fsl-mc bus entry
MAINTAINERS: fix nonexistent dtbinding file name
MAINTAINERS: add myself as maintainer for the fsl-mc bus
irqdomain: soc: Switch to irq_find_mapping()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
|
|
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware
interfaces, adding support for additional firmware features
including SoC identification and FF-A SRI callbacks as well as
various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung
Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and
Apple chips
There will be a follow up with a few more driver updates that are
still causing build regressions at the moment"
* tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (97 commits)
irqchip: Add support for Amlogic A4 and A5 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
reset: imx: fix incorrect module device table
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM
dt-bindings: firmware: imx: add property reset-controller
dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
memory: mtk-smi: Add ostd setting for mt8192
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
firmware: tegra: bpmp: Fix typo in bpmp-abi.h
soc/tegra: pmc: Use str_enable_disable-like helpers
soc: samsung: include linux/array_size.h where needed
firmware: arm_scmi: use ioread64() instead of ioread64_hi_lo()
soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200
soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0
soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro
soc: mediatek: mt8365-mmsys: Fix routing table masks and values
...
|
|
fsl_mc_allocator_driver_exit() was added explicitly by
commit 1e8ac83b6caf ("bus: fsl-mc: add fsl_mc_allocator cleanup function")
but was never used.
Remove it.
fsl_mc_portal_reset() was added in 2015 by
commit 197f4d6a4a00 ("staging: fsl-mc: fsl-mc object allocator driver")
but was never used.
Remove it.
fsl_mc_portal_reset() was the only caller of dpmcp_reset().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20241115152055.279732-1-linux@treblig.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
'rockchip', 's390', 'core', 'intel/vt-d' and 'amd/amd-vi' into next
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v6.15
Introduce Devicetree binding for providing board-specific firmware-name
for the GENI serial engine block. Add SDM630/636 support in pd-mapper.
Clean up and fix error handling in the SSC block bus driver.
Add missing msm8916-acc compatible to resolve a number of Devicetree
validation errors.
* tag 'qcom-drivers-for-6.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
dt-bindings: qcom: geni-se: Add 'firmware-name' property for firmware loading
Link: https://lore.kernel.org/r/20250319142448.2279164-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI Host
========
- Remove unused mhi_device_get() and mhi_queue_dma() APIs.
- Add support for SA8775p MHI endpoint device with IP_SW0 channel.
- Fix the race between mhi_unprepare_from_transfer() and mhi_queue_buf().
* tag 'mhi-for-v6.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: Fix race between unprepare and queue_buf
bus: mhi: host: pci_generic: Add support for SA8775P endpoint
bus: mhi: host: Remove unused functions
|
|
A client driver may use mhi_unprepare_from_transfer() to quiesce
incoming data during the client driver's tear down. The client driver
might also be processing data at the same time, resulting in a call to
mhi_queue_buf() which will invoke mhi_gen_tre(). If mhi_gen_tre() runs
after mhi_unprepare_from_transfer() has torn down the channel, a panic
will occur due to an invalid dereference leading to a page fault.
This occurs because mhi_gen_tre() does not verify the channel state
after locking it. Fix this by having mhi_gen_tre() confirm the channel
state is valid, or return error to avoid accessing deinitialized data.
Cc: stable@vger.kernel.org # 6.8
Fixes: b89b6a863dd5 ("bus: mhi: host: Add spinlock to protect WP access when queueing TREs")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Reviewed-by: Youssef Samir <quic_yabdulra@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Troy Hanson <quic_thanson@quicinc.com>
Link: https://lore.kernel.org/r/20250306172913.856982-1-jeff.hugo@oss.qualcomm.com
[mani: added stable tag]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
qcom_ssc_block_bus_probe()
If qcom_ssc_block_bus_pds_enable() fails, the previous call to
qcom_ssc_block_bus_pds_attach() must be undone, as already done in the
remove function.
In order to do that, move the code related to the power domains management
to the end of the function, in order to avoid many changes in all the error
handling path that would need to go through the new error handling path.
Fixes: 97d485edc1d9 ("bus: add driver for initializing the SSC bus on (some) qcom SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/1b89ec7438c9a893c09083e8591772c8ad3cb599.1740932040.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
reg_mpm_sscaon_config[01] are allocated with devm_ioremap_resource(). So,
they will be unmapped automatically by the manage resource framework.
Remove the incorrect explicit iounmap() calls from the remove function.
Fixes: 97d485edc1d9 ("bus: add driver for initializing the SSC bus on (some) qcom SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/efd06711b126e761a06eb5ef82daf9ad4e116a10.1740932040.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This is a backmerge from Linux 6.14-rc6, needed for the nova PR.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
In hindsight, there were some crucial subtleties overlooked when moving
{of,acpi}_dma_configure() to driver probe time to allow waiting for
IOMMU drivers with -EPROBE_DEFER, and these have become an
ever-increasing source of problems. The IOMMU API has some fundamental
assumptions that iommu_probe_device() is called for every device added
to the system, in the order in which they are added. Calling it in a
random order or not at all dependent on driver binding leads to
malformed groups, a potential lack of isolation for devices with no
driver, and all manner of unexpected concurrency and race conditions.
We've attempted to mitigate the latter with point-fix bodges like
iommu_probe_device_lock, but it's a losing battle and the time has come
to bite the bullet and address the true source of the problem instead.
The crux of the matter is that the firmware parsing actually serves two
distinct purposes; one is identifying the IOMMU instance associated with
a device so we can check its availability, the second is actually
telling that instance about the relevant firmware-provided data for the
device. However the latter also depends on the former, and at the time
there was no good place to defer and retry that separately from the
availability check we also wanted for client driver probe.
Nowadays, though, we have a proper notion of multiple IOMMU instances in
the core API itself, and each one gets a chance to probe its own devices
upon registration, so we can finally make that work as intended for
DT/IORT/VIOT platforms too. All we need is for iommu_probe_device() to
be able to run the iommu_fwspec machinery currently buried deep in the
wrong end of {of,acpi}_dma_configure(). Luckily it turns out to be
surprisingly straightforward to bootstrap this transformation by pretty
much just calling the same path twice. At client driver probe time,
dev->driver is obviously set; conversely at device_add(), or a
subsequent bus_iommu_probe(), any device waiting for an IOMMU really
should *not* have a driver already, so we can use that as a condition to
disambiguate the two cases, and avoid recursing back into the IOMMU core
at the wrong times.
Obviously this isn't the nicest thing, but for now it gives us a
functional baseline to then unpick the layers in between without many
more awkward cross-subsystem patches. There are some minor side-effects
like dma_range_map potentially being created earlier, and some debug
prints being repeated, but these aren't significantly detrimental. Let's
make things work first, then deal with making them nice.
With the basic flow finally in the right order again, the next step is
probably turning the bus->dma_configure paths inside-out, since all we
really need from bus code is its notion of which device and input ID(s)
to parse the common firmware properties with...
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci-driver.c
Acked-by: Rob Herring (Arm) <robh@kernel.org> # of/device.c
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/e3b191e6fd6ca9a1e84c5e5e40044faf97abb874.1740753261.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add MHI controller config for SA8775P endpoint. SA8775P supports IP_SW
usecase only. Hence use separate configuration to enable IP_SW channels.
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20241205065422.2515086-2-quic_msarkar@quicinc.com
[mani: updated commit message and removed 'modem' reference in config]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
If mhi_fw_load_handler() bails out early because the EE is not capable
of loading firmware, we may reference fw_load_type in cleanup which is
uninitialized at this point. The cleanup code checks fw_load_type as a
proxy for knowing if fbc_image was allocated and needs to be freed, but
we can directly test for that. This avoids the possible uninitialized
access and appears to be clearer code.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/e3148ac4-7bb8-422d-ae0f-18a8eb15e269@stanley.mountain/
Fixes: f88f1d0998ea ("bus: mhi: host: Add a policy to enable image transfer via BHIe in PBL")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214162109.3555300-1-quic_jhugo@quicinc.com
|
|
The simple-pm-bus driver only enables runtime PM for some buses
('simple-pm-bus') yet has started calling pm_runtime_force_suspend() and
pm_runtime_force_resume() during system suspend unconditionally.
This currently works, but that is not obvious and depends on
implementation details which may change at some point.
Add dedicated system sleep ops and only call pm_runtime_force_suspend()
and pm_runtime_force_resume() for buses that use runtime PM to avoid any
future surprises.
Fixes: c45839309c3d ("drivers: bus: simple-pm-bus: Use clocks")
Cc: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250214102130.3000-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-linus
Manivannan writes:
MHI Host
========
- Use pci_try_reset_function() to reset the MHI function during recovery process
to avoid the deadlock reported on the X1E80100 CRD device. The deadlock can
happen if the caller has already acquired the 'device_lock()' while calling
the recovery function. So using pci_try_reset_function() avoids the deadlock
by returning -EAGAIN if the lock was already acquired.
* tag 'mhi-fixes-for-v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
|
|
There are multiple places from where the recovery work gets scheduled
asynchronously. Also, there are multiple places where the caller waits
synchronously for the recovery to be completed. One such place is during
the PM shutdown() callback.
If the device is not alive during recovery_work, it will try to reset the
device using pci_reset_function(). This function internally will take the
device_lock() first before resetting the device. By this time, if the lock
has already been acquired, then recovery_work will get stalled while
waiting for the lock. And if the lock was already acquired by the caller
which waits for the recovery_work to be completed, it will lead to
deadlock.
This is what happened on the X1E80100 CRD device when the device died
before shutdown() callback. Driver core calls the driver's shutdown()
callback while holding the device_lock() leading to deadlock.
And this deadlock scenario can occur on other paths as well, like during
the PM suspend() callback, where the driver core would hold the
device_lock() before calling driver's suspend() callback. And if the
recovery_work was already started, it could lead to deadlock. This is also
observed on the X1E80100 CRD.
So to fix both issues, use pci_try_reset_function() in recovery_work. This
function first checks for the availability of the device_lock() before
trying to reset the device. If the lock is available, it will acquire it
and reset the device. Otherwise, it will return -EAGAIN. If that happens,
recovery_work will fail with the error message "Recovery failed" as not
much could be done.
Cc: stable@vger.kernel.org # 5.12
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/mhi/Z1me8iaK7cwgjL92@hovoldconsulting.com
Fixes: 7389337f0a78 ("mhi: pci_generic: Add suspend/resume/recovery procedure")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Analyzed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/mhi/Z2KKjWY2mPen6GPL@hovoldconsulting.com/
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/20250108-mhi_recovery_fix-v1-1-a0a00a17da46@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.15:
UAPI Changes:
fourcc:
- Add modifiers for MediaTek tiled formats
Cross-subsystem Changes:
bus:
- mhi: Enable image transfer via BHIe in PBL
dma-buf:
- Add fast-path for single-fence merging
Core Changes:
atomic helper:
- Allow full modeset on connector changes
- Clarify semantics of allow_modeset
- Clarify semantics of drm_atomic_helper_check()
buddy allocator:
- Fix multi-root cleanup
ci:
- Update IGT
display:
- dp: Support Extendeds Wake Timeout
- dp_mst: Fix RAD-to-string conversion
panic:
- Encode QR code according to Fido 2.2
probe helper:
- Cleanups
scheduler:
- Cleanups
ttm:
- Refactor pool-allocation code
- Cleanups
Driver Changes:
amdxdma:
- Fix error handling
- Cleanups
ast:
- Refactor detection of transmitter chips
- Refactor support of VBIOS display-mode handling
- astdp: Fix connection status; Filter unsupported display modes
bridge:
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- sn65dsi86: Fix device IDs
- Cleanups
i915:
- Enable Extendeds Wake Timeout
imagination:
- Check job dependencies with DRM-sched helper
ivpu:
- Improve command-queue handling
- Use workqueue for IRQ handling
- Add suport for HW fault injection
- Locking fixes
- Cleanups
mgag200:
- Add support for G200eH5 chips
msm:
- dpu: Add concurrent writeback support for DPU 10.x+
nouveau:
- Move drm_slave_encoder interface into driver
- nvkm: Refactor GSP RPC
omapdrm:
- Cleanups
panel:
- Convert several panels to multi-style functions to improve error
handling
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006,
Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Cleanups
qaic:
- Add support for AIC200
- Cleanups
renesas:
- Fix limits in DT bindings
rockchip:
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- Cleanups
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
xlnx:
- Set correct DMA segment size
- Fix error handling
- Fix docs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212090625.GA24865@linux.fritz.box
|
|
mhi_device_get() and mhi_queue_dma() haven't been used since 2020's
commit 189ff97cca53 ("bus: mhi: core: Add support for data transfer")
added them.
Remove them.
Note that mhi_queue_dma_sync() is used and has been left.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250127215859.261105-1-linux@treblig.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The space separator was factored out from the multiple chip name prints,
but several irq_chip::irq_print_chip() callbacks still print a leading
space. Remove the superfluous double spaces.
Fixes: 9d9f204bdf7243bf ("genirq/proc: Add missing space separator back")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/893f7e9646d8933cd6786d5a1ef3eb076d263768.1738764803.git.geert+renesas@glider.be
|
|
Bring rc1 to start the new release dev.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Currently, MHI host only performs firmware transfer via BHI in PBL and
BHIe from SBL. To support BHIe transfer directly from PBL, a policy
needs to be added.
With this policy, BHIe will be used to transfer firmware in PBL if the
MHI controller has BHIe regs, sets seg_len, and does not set
fbc_download. The intention is to transfer firmware using BHIe in PBL
without further BHIe transfers in SBL.
Signed-off-by: Matthew Leung <quic_mattleun@quicinc.com>
Reviewed-by: Youssef Samir <quic_yabdulra@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117170943.2643280-3-quic_jhugo@quicinc.com
|
|
Refactor the firmware loading code to have distinct helper functions for
BHI and BHIe operations. This lays the foundation for separating the
firmware loading protocol from the firmware being loaded and the EE it
is loaded in.
Signed-off-by: Matthew Leung <quic_mattleun@quicinc.com>
Reviewed-by: Youssef Samir <quic_yabdulra@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117170943.2643280-2-quic_jhugo@quicinc.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
|
|
We need the debugfs / driver-core fixes in here as well for testing and
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the IIO fixes in here as well, and it resolves a merge conflict
in:
drivers/iio/adc/ti-ads1119.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move all the
device_type variables used in the bus to be constant structures as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo.marliere@suse.com>
Link: https://lore.kernel.org/r/20240904-class_cleanup-fsl-mc-bus-v2-1-83fa25cbdc68@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Enable MSI-X if the endpoint supports.
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250108-msix-v2-1-dc4466922350@quicinc.com
[mani: added pci_generic prefix to subject]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Constify the following API:
struct device *device_find_child(struct device *dev, void *data,
int (*match)(struct device *dev, void *data));
To :
struct device *device_find_child(struct device *dev, const void *data,
device_match_t match);
typedef int (*device_match_t)(struct device *dev, const void *data);
with the following reasons:
- Protect caller's match data @*data which is for comparison and lookup
and the API does not actually need to modify @*data.
- Make the API's parameters (@match)() and @data have the same type as
all of other device finding APIs (bus|class|driver)_find_device().
- All kinds of existing device match functions can be directly taken
as the API's argument, they were exported by driver core.
Constify the API and adapt for various existing usages.
BTW, various subsystem changes are squashed into this commit to meet
'git bisect' requirement, and this commit has the minimal and simplest
changes to complement squashing shortcoming, and that may bring extra
code improvement.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for drivers/pwm
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20241224-const_dfc_done-v5-4-6623037414d4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
fsl_mc_device_match() does not modify caller's inputs.
To prepare for constifying API device_find_child() later.
Constify this comparison function by simply changing its
parameter types to const pointer.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241224-const_dfc_done-v5-3-6623037414d4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add MHI controller configuration for QDU100 device.
The Qualcomm X100 5G RAN Accelerator card is designed to enhance Open vRAN
servers by offloading CPUs from intensive 5G baseband functions.
Link: https://docs.qualcomm.com/bundle/publicresource/87-79371-1_REV_A_Qualcomm_X100_5G_RAN_Accelerator_Card_Product_Brief.pdf
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20241212-qdu100_us-v5-1-3349fb23512a@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
A recent change converting the MHI pci_generic driver to use
pcim_iomap_region() failed to update the BAR parameter which is an index
rather than a mask.
This specifically broke the modem on machines like the Lenovo ThinkPad
X13s and x1e80100 CRD:
mhi-pci-generic 0004:01:00.0: failed to map pci region: -22
mhi-pci-generic 0004:01:00.0: probe with driver mhi-pci-generic failed with error -22
Fixes: bd23e836423e ("bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Mayank Rana <quic_mrana@quicinc.com>
Link: https://lore.kernel.org/r/20241201171120.31616-1-johan+linaro@kernel.org
|
|
mhi_alloc_bhie_table() starts by allocating a vector of struct mhi_buf
then it allocates a DMA buffer for each element. If allocation fails,
it will free the allocated DMA buffers, but it neglects freeing the
mhi_buf vector.
Avoid memory leaks by freeing the mhi_buf vector on error.
Fixes: 3000f85b8f47 ("bus: mhi: core: Add support for basic PM operations")
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20241024214715.1208940-1-quic_yabdulra@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char/misc/iio and other small driver
subsystem updates for 6.13-rc1.
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible.
I think this is the tipping point, expect to see way more rust
drivers going forward now that these bindings are present. Next
merge window hopefully we will have pci and platform drivers
working, which will fully enable almost all driver subsystems to
start accepting (or at least getting) rust drivers.
This is the end result of a lot of work from a lot of people,
congrats to all of them for getting this far, you've proved many of
us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
All of these have been in linux-next for a while, with no other
reported issues other than that merge conflict"
* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
mei: vsc: Fix typo "maintstepping" -> "mainstepping"
firmware: Switch back to struct platform_driver::remove()
misc: isl29020: Fix the wrong format specifier
scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
fpga: Switch back to struct platform_driver::remove()
mei: vsc: Improve error logging in vsc_identify_silicon()
mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
spmi: pmic-arb: fix return path in for_each_available_child_of_node()
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
misc: atmel-ssc: Use of_property_present() for non-boolean properties
misc: keba: Add hardware dependency
...
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/bus to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use of both pcim_iomap_regions() and pcim_iomap_table() APIs are
deprecated. Hence, switch to pcim_iomap_region() API which handles both the
request and map of the MHI BAR region.
Cc: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Mayank Rana <quic_mrana@quicinc.com>
Link: https://lore.kernel.org/r/20241004023351.6946-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Each of the __field() macros were triggering sparse warnings similar to:
trace.h:87:1: sparse: sparse: cast to restricted __le64
trace.h:87:1: sparse: sparse: restricted __le64 degrades to integer
trace.h:87:1: sparse: sparse: restricted __le64 degrades to integer
Change each little endian type to its similarly sized native integer.
Convert inputs into native endian.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402071859.8qMhgJEQ-lkp@intel.com/
Fixes: ceeb64f41fe6 ("bus: mhi: host: Add tracing support")
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Mayank Rana <quic_mrana@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20241004170321.4047492-1-quic_carlv@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Correctly spelled comments make it easier for the reader to understand
the code.
Fix typos:
'Normaly' ==> 'Normally',
'gurantee' ==> 'guarantee',
'guranteed' ==> 'guaranteed'.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20240929090334.524543-1-yanzhen@vivo.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of patches for the driver core code for 6.12-rc1.
This set is the one that caused the most delay on my side, due to lots
of last-minute reports of problems in the async shutdown feature that
was added. In the end, I've reverted all of the patches in that series
so we are back to "normal" and the patch set is being reworked for the
next merge window.
Other than the async shutdown patches that were reverted, included in
here are:
- minor driver core cleanups
- minor driver core bus and class api cleanups and simplifications
for some callbacks
- some const markings of structures
- other even more minor cleanups
All of these, including the last minute reverts, have been in
linux-next, but all of the reports of problems in linux-next were
before the reverts happened. After the reverts, all is good"
* tag 'driver-core-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
Revert "driver core: don't always lock parent in shutdown"
Revert "driver core: separate function to shutdown one device"
Revert "driver core: shut down devices asynchronously"
Revert "nvme-pci: Make driver prefer asynchronous shutdown"
Revert "driver core: fix async device shutdown hang"
driver core: fix async device shutdown hang
driver core: attribute_container: Remove unused functions
driver core: Trivially simplify ((struct device_private *)curr)->device->p to @curr
devres: Correclty strip percpu address space of devm_free_percpu() argument
driver core: Make parameter check consistent for API cluster device_(for_each|find)_child()
bus: fsl-mc: make fsl_mc_bus_type const
nvme-pci: Make driver prefer asynchronous shutdown
driver core: shut down devices asynchronously
driver core: separate function to shutdown one device
driver core: don't always lock parent in shutdown
platform: Make platform_bus_type constant
driver core: class: Check namespace relevant parameters in class_register()
driver:base:core: Adding a "Return:" line in comment for device_link_add()
drivers/base: Introduce device_match_t for device finding APIs
firmware_loader: Block path traversal
...
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/drivers
Allwinner SoC driver changes for 6.12
- Simplify sunxi-rsb driver probe function using dev_err_probe()
* tag 'sunxi-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
bus: sunxi-rsb: Simplify code with dev_err_probe()
Link: https://lore.kernel.org/r/ZtnYUswjHdLRYq8Y@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use dev_err_probe() directly in the driver probe phase. This can
simplify the code a bit.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240905114134.80310-1-zhangzekun11@huawei.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/drivers
ARM: OMAP2+: misc driver updates for v6.12
* tag 'omap-for-v6.12/drivers-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: OMAP2+: Remove obsoleted declaration for gpmc_onenand_init
bus: ti-sysc: Remove excess struct member 'disable_on_idle' description
bus: ti-sysc: Use of_property_present()
Link: https://lore.kernel.org/r/7hcyljarit.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers
i.MX drivers changes for 6.12:
- A couple of imx-weim bus driver changes from Wu Bo to support compile
test and use devm_clk_get_enabled() helper to clean up code a bit
* tag 'imx-drivers-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
bus: imx-weim: change to use devm_clk_get_enabled() helper
bus: imx-weim: support compile test
Link: https://lore.kernel.org/r/20240904143439.211552-1-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
All Foxconn modems support generic EDL trigger to flash the firmware.
Hence, enable the EDL trigger using mhi_pci_dev_info::edl_trigger.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240725022941.65948-2-slark_xiao@163.com
[mani: Reworded the subject and description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
