| Age | Commit message (Collapse) | Author |
|---|
|
After scanning the devicetree, we remove all entries that have only one
reference, while creating GPIO shared proxies for the remaining, shared
entries. However: for the reset-gpio corner-case, we will have two
references for a "reset-gpios" pin that's not really shared. In this
case one will come from the actual consumer fwnode and the other from
the potential auxiliary reset-gpio device. This causes the GPIO core to
create unnecessary GPIO shared proxy devices for pins that are not
really shared.
Add a function that can detect this situation and remove entries that
have exactly two references but one of them is a reset-gpio.
Fixes: 7b78b26757e0 ("gpio: shared: handle the reset-gpios corner case")
Link: https://lore.kernel.org/r/20260108-gpio-shared-false-positive-v1-1-5dbf8d1b2f7d@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
If on any iteration in gpiod_find(), gpio_desc_table_match() returns
NULL (which is normal and expected), we never reinitialize desc back to
ERR_PTR(-ENOENT) and if we don't find a match later on, we will return
NULL causing a NULL-pointer dereference in users not expecting it. Don't
initialize desc, but return ERR_PTR(-ENOENT) explicitly at the end of
the function.
Fixes: 9700b0fccf38 ("gpiolib: allow multiple lookup tables per consumer")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/00107523-7737-4b92-a785-14ce4e93b8cb@samsung.com/
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260108102314.18816-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
We allocate memory for the GPIO lookup table at the top of
gpio_shared_add_proxy_lookup() but we don't use it until the very end.
Depending on the timing, we may return earlier. Move the allocation
towards the end.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20260106-gpio-shared-fixes-v2-3-c7091d2f7581@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
When matching the reset-gpio reference with the actual firmware node
consuming the GPIO, we also need to lock the structure associated with
the latter as it can change while we're doing it.
Due to triggering lockdep false-positives, we need to use a per-reference
lockdep class but accidentally, this also allows us to remove the
previous lockdep workaround for cleaner code.
Fixes: 49416483a953 ("gpio: shared: allow sharing a reset-gpios pin between reset-gpio and gpiolib")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/00107523-7737-4b92-a785-14ce4e93b8cb@samsung.com/
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20260106-gpio-shared-fixes-v2-2-c7091d2f7581@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
When we defer probe due to unlucky timing of adding the lookup table, we
assign the matching firmware node to the shared reference for the future
probing. However, the fwnode we assign is wrong so fix it and assign the
one associated with the reset-gpio device.
Fixes: 49416483a953 ("gpio: shared: allow sharing a reset-gpios pin between reset-gpio and gpiolib")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/00107523-7737-4b92-a785-14ce4e93b8cb@samsung.com/
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20260106-gpio-shared-fixes-v2-1-c7091d2f7581@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The GPIO controller is configured as non-sleeping but it uses generic
pinctrl helpers which use a mutex for synchronization.
This can cause the following lockdep splat with shared GPIOs enabled on
boards which have multiple devices using the same GPIO:
BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 12, name:
kworker/u16:0
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
6 locks held by kworker/u16:0/12:
#0: ffff0001f0018d48 ((wq_completion)events_unbound#2){+.+.}-{0:0},
at: process_one_work+0x18c/0x604
#1: ffff8000842dbdf0 (deferred_probe_work){+.+.}-{0:0}, at:
process_one_work+0x1b4/0x604
#2: ffff0001f18498f8 (&dev->mutex){....}-{4:4}, at:
__device_attach+0x38/0x1b0
#3: ffff0001f75f1e90 (&gdev->srcu){.+.?}-{0:0}, at:
gpiod_direction_output_raw_commit+0x0/0x360
#4: ffff0001f46e3db8 (&shared_desc->spinlock){....}-{3:3}, at:
gpio_shared_proxy_direction_output+0xd0/0x144 [gpio_shared_proxy]
#5: ffff0001f180ee90 (&gdev->srcu){.+.?}-{0:0}, at:
gpiod_direction_output_raw_commit+0x0/0x360
irq event stamp: 81450
hardirqs last enabled at (81449): [<ffff8000813acba4>]
_raw_spin_unlock_irqrestore+0x74/0x78
hardirqs last disabled at (81450): [<ffff8000813abfb8>]
_raw_spin_lock_irqsave+0x84/0x88
softirqs last enabled at (79616): [<ffff8000811455fc>]
__alloc_skb+0x17c/0x1e8
softirqs last disabled at (79614): [<ffff8000811455fc>]
__alloc_skb+0x17c/0x1e8
CPU: 2 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted
6.19.0-rc4-next-20260105+ #11975 PREEMPT
Hardware name: Hardkernel ODROID-M1 (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x24
__might_resched+0x144/0x248
__might_sleep+0x48/0x98
__mutex_lock+0x5c/0x894
mutex_lock_nested+0x24/0x30
pinctrl_get_device_gpio_range+0x44/0x128
pinctrl_gpio_direction+0x3c/0xe0
pinctrl_gpio_direction_output+0x14/0x20
rockchip_gpio_direction_output+0xb8/0x19c
gpiochip_direction_output+0x38/0x94
gpiod_direction_output_raw_commit+0x1d8/0x360
gpiod_direction_output_nonotify+0x7c/0x230
gpiod_direction_output+0x34/0xf8
gpio_shared_proxy_direction_output+0xec/0x144 [gpio_shared_proxy]
gpiochip_direction_output+0x38/0x94
gpiod_direction_output_raw_commit+0x1d8/0x360
gpiod_direction_output_nonotify+0x7c/0x230
gpiod_configure_flags+0xbc/0x480
gpiod_find_and_request+0x1a0/0x574
gpiod_get_index+0x58/0x84
devm_gpiod_get_index+0x20/0xb4
devm_gpiod_get_optional+0x18/0x30
rockchip_pcie_probe+0x98/0x380
platform_probe+0x5c/0xac
really_probe+0xbc/0x298
Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Cc: stable@vger.kernel.org
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/d035fc29-3b03-4cd6-b8ec-001f93540bc6@samsung.com/
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20260106090011.21603-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The reference obtained by calling usb_get_dev() is not released in the
gpio_mpsse_probe() error paths. Fix that by using device managed helper
functions. Also remove the usb_put_dev() call in the disconnect function
since now it will be released automatically.
Cc: stable@vger.kernel.org
Fixes: c46a74ff05c0 ("gpio: add support for FTDI's MPSSE as GPIO")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://lore.kernel.org/r/20251226060414.20785-1-nihaal@cse.iitm.ac.in
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
GPIO drivers with latch input support may miss short pulses on input
pins even when input latching is enabled. The generic interrupt logic in
the pca953x driver reports interrupts by comparing the current input
value against the previously sampled one and only signals an event when
a level change is observed between two reads.
For short pulses, the first edge is captured when the input register is
read, but if the signal returns to its previous level before the read,
the second edge is not observed. As a result, successive pulses can
produce identical input values at read time and no level change is
detected, causing interrupts to be missed. Below timing diagram shows
this situation where the top signal is the input pin level and the
bottom signal indicates the latched value.
─────┐ ┌──*───────────────┐ ┌──*─────────────────┐ ┌──*───
│ │ . │ │ . │ │ .
│ │ │ │ │ │ │ │ │
└──*──┘ │ └──*──┘ │ └──*──┘ │
Input │ │ │ │ │ │
▼ │ ▼ │ ▼ │
IRQ │ IRQ │ IRQ │
. . .
─────┐ .┌──────────────┐ .┌────────────────┐ .┌──
│ │ │ │ │ │
│ │ │ │ │ │
└────────*┘ └────────*┘ └────────*┘
Latched │ │ │
▼ ▼ ▼
READ 0 READ 0 READ 0
NO CHANGE NO CHANGE
PCAL variants provide an interrupt status register that records which
pins triggered an interrupt, but the status and input registers cannot
be read atomically. The interrupt status is only cleared when the input
port is read, and the input value must also be read to determine the
triggering edge. If another interrupt occurs on a different line after
the status register has been read but before the input register is
sampled, that event will not be reflected in the earlier status
snapshot, so relying solely on the interrupt status register is also
insufficient.
Support for input latching and interrupt status handling was previously
added by [1], but the interrupt status-based logic was reverted by [2]
due to these issues. This patch addresses the original problem by
combining both sources of information. Events indicated by the interrupt
status register are merged with events detected through the existing
level-change logic. As a result:
* short pulses, whose second edges are invisible, are detected via the
interrupt status register, and
* interrupts that occur between the status and input reads are still
caught by the generic level-change logic.
This significantly improves robustness on devices that signal interrupts
as short pulses, while avoiding the issues that led to the earlier
reversion. In practice, even if only the first edge of a pulse is
observable, the interrupt is reliably detected.
This fixes missed interrupts from an Ilitek touch controller with its
interrupt line connected to a PCAL6416A, where active-low pulses are
approximately 200 us long.
[1] commit 44896beae605 ("gpio: pca953x: add PCAL9535 interrupt support for Galileo Gen2")
[2] commit d6179f6c6204 ("gpio: pca953x: Improve interrupt support")
Fixes: d6179f6c6204 ("gpio: pca953x: Improve interrupt support")
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251217153050.142057-1-ernestvanhoecke@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
If two drivers were calling gpiochip_add_data_with_key(), one may be
traversing the srcu-protected list in gpio_name_to_desc(), meanwhile
other has just added its gdev in gpiodev_add_to_list_unlocked().
This creates a non-mutexed and non-protected timeframe, when one
instance is dereferencing and using &gdev->srcu, before the other
has initialized it, resulting in crash:
[ 4.935481] Unable to handle kernel paging request at virtual address ffff800272bcc000
[ 4.943396] Mem abort info:
[ 4.943400] ESR = 0x0000000096000005
[ 4.943403] EC = 0x25: DABT (current EL), IL = 32 bits
[ 4.943407] SET = 0, FnV = 0
[ 4.943410] EA = 0, S1PTW = 0
[ 4.943413] FSC = 0x05: level 1 translation fault
[ 4.943416] Data abort info:
[ 4.943418] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 4.946220] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 4.955261] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 4.955268] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000038e6c000
[ 4.961449] [ffff800272bcc000] pgd=0000000000000000
[ 4.969203] , p4d=1000000039739003
[ 4.979730] , pud=0000000000000000
[ 4.980210] phandle (CPU): 0x0000005e, phandle (BE): 0x5e000000 for node "reset"
[ 4.991736] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
...
[ 5.121359] pc : __srcu_read_lock+0x44/0x98
[ 5.131091] lr : gpio_name_to_desc+0x60/0x1a0
[ 5.153671] sp : ffff8000833bb430
[ 5.298440]
[ 5.298443] Call trace:
[ 5.298445] __srcu_read_lock+0x44/0x98
[ 5.309484] gpio_name_to_desc+0x60/0x1a0
[ 5.320692] gpiochip_add_data_with_key+0x488/0xf00
5.946419] ---[ end trace 0000000000000000 ]---
Move initialization code for gdev fields before it is added to
gpio_devices, with adjacent initialization code.
Adjust goto statements to reflect modified order of operations
Fixes: 47d8b4c1d868 ("gpio: add SRCU infrastructure to struct gpio_device")
Reviewed-by: Jakub Lewalski <jakub.lewalski@nokia.com>
Signed-off-by: Paweł Narewski <pawel.narewski@nokia.com>
[Bartosz: fixed a build issue, removed stray newline]
Link: https://lore.kernel.org/r/20251224082641.10769-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
We currently support sharing GPIOs between multiple devices whose drivers
use either the GPIOLIB API *OR* the reset control API but not both at
the same time.
There's an unlikely corner-case where a reset-gpios pin can be shared by
one driver using the GPIOLIB API and a second using the reset API. This
will currently not work as the reset-gpio consumers are not described in
firmware at the time of scanning so the shared GPIO just chooses one of
the proxies created for the consumers when the reset-gpio driver performs
the lookup. This can of course conflict in the case described above.
In order to fix it: if we deal with the "reset-gpios" pin that's shared
acconding to the firmware node setup, create a proxy for each described
consumer as well as another one for the potential reset-gpio device. To
that end: rework the matching to take this into account.
Fixes: 7b78b26757e0 ("gpio: shared: handle the reset-gpios corner case")
Link: https://lore.kernel.org/r/20251222-gpio-shared-reset-gpio-proxy-v1-3-8d4bba7d8c14@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
When matching the firmware node with the potential consumer, we
currently omit the con_id string. This can lead to false positives in
the unlikely case of the consumer having been assigned more than one
shared GPIO. Check the connector ID before proceeding.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Link: https://lore.kernel.org/r/20251222-gpio-shared-reset-gpio-proxy-v1-2-8d4bba7d8c14@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The GPIO machine lookup mechanism dates back to old ARM board files
where lookup tables would all be defined in a single place. Since then,
lookup tables have also been used to address various DT and ACPI quirks
like missing GPIOs and - as of recently - setting up shared GPIO proxy
devices.
The lookup itself stops when we find the first matching table for a
consumer and - if it doesn't contain the right entry - the lookup fails.
Since the tables can now be defined in multiple places and we can't know
how many there are, effectively limiting a consumer to only a single
lookup table is no longer viable.
Rework the code to always look through all tables matching the consumer.
Link: https://lore.kernel.org/r/20251222-gpio-shared-reset-gpio-proxy-v1-1-8d4bba7d8c14@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
We always call superio_enter() in it87_gpio_direction_out() but only
call superio_exit() if the call to it87_gpio_set() succeeds. Move the
label to balance the calls in error path as well.
Fixes: ef877a159072 ("gpio: it87: use new line value setter callbacks")
Reported-by: Daniel Gibson <daniel@gibson.sh>
Closes: https://lore.kernel.org/all/bd0a00e3-9b8c-43e8-8772-e67b91f4c71e@gibson.sh/
Link: https://lore.kernel.org/r/20251210055026.23146-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
- fix spinlock op type after conversion to lock guards
- fix a memory leak in error path in gpio-regmap
- Kconfig fixes in GPIO drivers
- add a GPIO ACPI quirk for Dell Precision 7780
- set of fixes for shared GPIO management
* tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: shared: make locking more fine-grained
gpio: shared: fix auxiliary device cleanup order
gpio: shared: check if a reference is populated before cleaning its resources
gpio: shared: fix NULL-pointer dereference in teardown path
gpio: shared: ignore disabled nodes when traversing the device-tree
gpiolib: acpi: Add quirk for Dell Precision 7780
gpio: tb10x: fix OF_GPIO dependency
gpio: qixis: select CONFIG_REGMAP_MMIO
gpio: regmap: Fix memleak in error path in gpio_regmap_register()
gpio: mmio: fix bad guard conversion
|
|
The global gpio_shared_lock has caused some issues when recursively
removing GPIO shared proxies. The thing is: we don't really need it.
Once created from an init-call, the shared GPIO data structures are
never removed, there's no need to protect the linked lists of entries
and references. All we need to protect is the shared GPIO descriptor
(which we already do with a per-entry mutex) and the auxiliary device
data in struct gpio_shared_ref.
Remove the global gpio_shared_lock and use a per-reference mutex to
protect shared references when adding/removing the auxiliary devices and
their GPIO lookup entries.
Link: https://lore.kernel.org/r/20251206-gpio-shared-teardown-fixes-v1-4-35ac458cfce1@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Dropping the last reference to the internal struct device should be the
last thing we do so delete the device first and then uninit it which
also involves the final put_device().
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Link: https://lore.kernel.org/r/20251206-gpio-shared-teardown-fixes-v1-3-35ac458cfce1@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
It's possible that not all proxy entries will be set up when the device
gets removed so check if they are before trying to dereference members
which are still NULL. This can happen if some consumers never requested
their shared GPIOs.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Link: https://lore.kernel.org/r/20251206-gpio-shared-teardown-fixes-v1-2-35ac458cfce1@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
We need to actually store the address of the GPIO lookup table in the
reference struct before we try to free it or - worse - dereference its
members.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Link: https://lore.kernel.org/r/20251206-gpio-shared-teardown-fixes-v1-1-35ac458cfce1@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Don't consider disabled devices when traversing the device-tree looking
for shared GPIOs. Even if they do share a phandle to a pin, they can
never be instantiated and request it.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Link: https://lore.kernel.org/r/20251203092309.34737-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Dell Precision 7780 often wakes up on its own from suspend. Sometimes
wake up happens immediately (i. e. within 7 seconds), sometimes it happens
after, say, 30 minutes.
Fixes: 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
Link: https://lore.kernel.org/linux-i2c/197ae95ffd8.dc819e60457077.7692120488609091556@zohomail.com/
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Askar Safin <safinaskar@gmail.com>
Link: https://lore.kernel.org/r/20251206180414.3183334-2-safinaskar@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Pull bitmap updates from Yury Norov:
- Runtime field_{get,prep}() (Geert)
- Rust ID pool updates (Alice)
- min_t() simplification (David)
- __sw_hweightN kernel-doc fixes (Andy)
- cpumask.h headers cleanup (Andy)
* tag 'bitmap-for-6.19' of github.com:/norov/linux: (32 commits)
rust_binder: use bitmap for allocation of handles
rust: id_pool: do not immediately acquire new ids
rust: id_pool: do not supply starting capacity
rust: id_pool: rename IdPool::new() to with_capacity()
rust: bitmap: add BitmapVec::new_inline()
rust: bitmap: add MAX_LEN and MAX_INLINE_LEN constants
cpumask: Don't use "proxy" headers
soc: renesas: Use bitfield helpers
clk: renesas: Use bitfield helpers
ALSA: usb-audio: Convert to common field_{get,prep}() helpers
soc: renesas: rz-sysc: Convert to common field_get() helper
pinctrl: ma35: Convert to common field_{get,prep}() helpers
iio: mlx90614: Convert to common field_{get,prep}() helpers
iio: dac: Convert to common field_prep() helper
gpio: aspeed: Convert to common field_{get,prep}() helpers
EDAC/ie31200: Convert to common field_get() helper
crypto: qat - convert to common field_get() helper
clk: at91: Convert to common field_{get,prep}() helpers
bitfield: Add non-constant field_{prep,get}() helpers
bitfield: Add less-checking __FIELD_{GET,PREP}()
...
|
|
Selecting OF_GPIO is generally not allowed, it always gets enabled
when both GPIOLIB and OF are turned on.
The tb10x driver now warns about this after it was enabled for
compile-testing:
WARNING: unmet direct dependencies detected for OF_GPIO
Depends on [n]: GPIOLIB [=y] && OF [=n] && HAS_IOMEM [=y]
Selected by [y]:
- GPIO_TB10X [=y] && GPIOLIB [=y] && HAS_IOMEM [=y] && (ARC_PLAT_TB10X || COMPILE_TEST [=y])
OF_GPIO is not required for compile-testing and is already enabled
when the driver is usable, so just drop the 'select' line.
Fixes: 682fbb18e14c ("gpio: tb10x: allow building the module with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20251205095429.1291866-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
|
|
The regmap drivers need to be selected by each user, without that there
can be configurations that fail to link:
x86_64-linux-ld: drivers/gpio/gpio-qixis-fpga.o: in function `qixis_cpld_gpio_probe':
gpio-qixis-fpga.c:(.text+0x13a): undefined reference to `__devm_regmap_init_mmio_clk'
Fixes: e88500247dc3 ("gpio: add QIXIS FPGA GPIO controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20251204094928.1031494-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Call gpiochip_remove() to free the resources allocated by
gpiochip_add_data() in error path.
Fixes: 553b75d4bfe9 ("gpio: regmap: Allow to allocate regmap-irq device")
Fixes: ae495810cffe ("gpio: regmap: add the .fixed_direction_output configuration parameter")
CC: stable@vger.kernel.org
Co-developed-by: WangYuli <wangyl5933@chinaunicom.cn>
Signed-off-by: WangYuli <wangyl5933@chinaunicom.cn>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251204101303.30353-1-guanwentao@uniontech.com
[Bartosz: reworked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, lots of various updates to existing ones, some
refactoring support for new models and misc tweaks and fixes.
The biggest new feature in GPIO core is adding support for managed,
enable-counted sharing of GPIO pins, something that - until now - was
only hacked around with the GPIOD_FLAGS_BIT_NONEXCLUSIVE request flag
which basically allowed drivers to "fight it out" for the descriptor
and provided no synchronization. It was enabled on Qualcomm platforms
(and thus is enabled on arm64 defconfig) and I plan on removing
GPIOD_FLAGS_BIT_NONEXCLUSIVE once all drivers using it are switched to
the new mechanism.
GPIO core:
- add proper support for shared GPIOs that's aiming to replace the
current sharing mechanism (which provides no synchronization ot
enable counting) and enable it for Qualcomm platforms
- improve the software node GPIO lookup by using the fwnode
representation instead of the software node's name which was prone
to bugs (GPIO controllers don't have to use the software node's
name as their kernel label)
- remove the last user of legacy-of-mm-gpiochip.h and drop the header
- move closer to removing the legacy gpio_request_one() routine
- rename some symbols for consistency
- shrink GPIO printk() helpers by reusing existing code
- remove some redundant kernel messages
- use min() instead of min_t() in GPIO ACPI code
- use system_percpu_wq instead of system_wq in GPIO character device
code
New drivers:
- add a driver for the QIXIS FPGA GPIO controller
Driver improvements:
- use modernized variants of power management macros across a wide
array of drivers in order to avoid having to use the __maybe_unused
attribute
- convert gpio-elkhartlake and reset-gpio to using the auxiliary bus
instead of the platform bus as they are not really described in
firmware
- use lock guards and update symbol prefixes in gpio-mmio
- support the bryx radio interface kit in gpio-mpsse + refactor the
driver
- use software nodes for configuring the reset-gpio driver, including
setting up the reference to the shared "reset" pin
- check and propagate the return value of gpiod_set_value() to
user-space in gpio-virtuser (this was previously not possible as
this function returned void)
- extend the gpio-regmap helper with more features (bypass cache for
aliased inputs, force writes for aliased data registers, add a new
configuration parameter)
- remove unneeded includes from gpio-aspeed and gpio-latch
- add support for Tegra410 to gpio-tegra186
- replace PCI-specific PM with generic device-level PM in gpio-bt8xx
- use dynamic GPIO range allocation in gpio-loongson-64bit
- improve handling of level-triggered interrupts in gpio-pca953x
- add suspend/resume support to gpio-fxl6408
- add support for more models to gpio-menz127
- optimize gpio-mvebu interrupt handling by avoiding unnecessary
calls to mvebu_gpio_irq_handler()
- make locking more consistent in gpio-grgpio
Device-tree bindings:
- document new NXP and Microchip models
Documentation:
- add a comprehensive compatibility and feature list for
gpio-pca953x, which is a great addition as it's probably the most
commonly used GPIO expander driver
- kernel-doc tweaks
Late fixes:
- use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson"
* tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (80 commits)
gpio: loongson: Switch 2K2000/3000 GPIO to BYTE_CTRL_MODE
gpio: regmap: fix kernel-doc notation
gpio: shared: fix a deadlock
gpio: shared-proxy: set suppress_bind_attrs
gpio: shared: ignore GPIO hogs when traversing the device tree
gpio: shared: ignore special __symbols__ node when traversing device tree
gpio: shared: handle the reset-gpios corner case
gpio: zynq: Use modern PM macros
gpio: xilinx: Use modern PM macros
gpio: xgene: Use modern PM macros
gpio: uniphier: Use modern PM macros
gpio: tqmx86: Use modern PM macros
gpio: pch: Use modern PM macros
gpio: omap: Use modern PM macros
gpio: msc313: Use modern PM macros
gpio: mlxbf2: Use modern PM macros
gpio: ml-ioh: Use modern PM macros
gpio: pl061: Use modern PM macros
gpio: htc-egpio: Use modern PM macros
gpio: brcmstb: Use modern PM macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there isn't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API cleanup work, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes"
* tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (739 commits)
ALSA: hda/realtek: Add PCI SSIDs to HP ProBook quirks
ALSA: usb-audio: Simplify with usb_endpoint_max_periodic_payload()
ALSA: hda/realtek: fix mute/micmute LEDs don't work for more HP laptops
ALSA: rawmidi: Fix inconsistent indenting warning reported by smatch
ALSA: dice: fix buffer overflow in detect_stream_formats()
ASoC: codecs: Modify awinic amplifier dsp read and write functions
ASoC: SDCA: Fixup some more Kconfig issues
ASoC: cs35l56: Log a message if firmware is missing
ASoC: nau8325: Delete a stray tab
firmware: cs_dsp: Add test cases for client_ops == NULL
firmware: cs_dsp: Don't require client to provide a struct cs_dsp_client_ops
ASoC: fsl_micfil: Set channel range control
ASoC: fsl_micfil: Add default quality for different platforms
ASoC: intel: sof_sdw: Add codec_info for cs42l45
ASoC: sdw_utils: Add cs42l45 support functions
ASoC: intel: sof_sdw: Add ability to have auxiliary devices
ASoC: sdw_utils: Move codec_name to dai info
ASoC: sdw_utils: Add codec_conf for every DAI
ASoC: SDCA: Add terminal type into input/output widget name
ASoC: SDCA: Align mute controls to ALSA expectations
...
|
|
A recent spinlock guard conversion consistently used the wrong guard so
that interrupts are no longer disabled while holding the chip lock
(which can cause deadlocks).
Fixes: 7e061b462b3d ("gpio: mmio: use lock guards")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20251203105206.24453-1-johan@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fd prepare updates from Christian Brauner:
"This adds the FD_ADD() and FD_PREPARE() primitive. They simplify the
common pattern of get_unused_fd_flags() + create file + fd_install()
that is used extensively throughout the kernel and currently requires
cumbersome cleanup paths.
FD_ADD() - For simple cases where a file is installed immediately:
fd = FD_ADD(O_CLOEXEC, vfio_device_open_file(device));
if (fd < 0)
vfio_device_put_registration(device);
return fd;
FD_PREPARE() - For cases requiring access to the fd or file, or
additional work before publishing:
FD_PREPARE(fdf, O_CLOEXEC, sync_file->file);
if (fdf.err) {
fput(sync_file->file);
return fdf.err;
}
data.fence = fd_prepare_fd(fdf);
if (copy_to_user((void __user *)arg, &data, sizeof(data)))
return -EFAULT;
return fd_publish(fdf);
The primitives are centered around struct fd_prepare. FD_PREPARE()
encapsulates all allocation and cleanup logic and must be followed by
a call to fd_publish() which associates the fd with the file and
installs it into the caller's fdtable. If fd_publish() isn't called,
both are deallocated automatically. FD_ADD() is a shorthand that does
fd_publish() immediately and never exposes the struct to the caller.
I've implemented this in a way that it's compatible with the cleanup
infrastructure while also being usable separately. IOW, it's centered
around struct fd_prepare which is aliased to class_fd_prepare_t and so
we can make use of all the basica guard infrastructure"
* tag 'vfs-6.19-rc1.fd_prepare.fs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (42 commits)
io_uring: convert io_create_mock_file() to FD_PREPARE()
file: convert replace_fd() to FD_PREPARE()
vfio: convert vfio_group_ioctl_get_device_fd() to FD_ADD()
tty: convert ptm_open_peer() to FD_ADD()
ntsync: convert ntsync_obj_get_fd() to FD_PREPARE()
media: convert media_request_alloc() to FD_PREPARE()
hv: convert mshv_ioctl_create_partition() to FD_ADD()
gpio: convert linehandle_create() to FD_PREPARE()
pseries: port papr_rtas_setup_file_interface() to FD_ADD()
pseries: convert papr_platform_dump_create_handle() to FD_ADD()
spufs: convert spufs_gang_open() to FD_PREPARE()
papr-hvpipe: convert papr_hvpipe_dev_create_handle() to FD_PREPARE()
spufs: convert spufs_context_open() to FD_PREPARE()
net/socket: convert __sys_accept4_file() to FD_ADD()
net/socket: convert sock_map_fd() to FD_ADD()
net/kcm: convert kcm_ioctl() to FD_PREPARE()
net/handshake: convert handshake_nl_accept_doit() to FD_PREPARE()
secretmem: convert memfd_secret() to FD_ADD()
memfd: convert memfd_create() to FD_ADD()
bpf: convert bpf_token_create() to FD_PREPARE()
...
|
|
The manuals of 2K2000 says both BIT_CTRL_MODE and BYTE_CTRL_MODE are
supported but the latter is recommended. Also on 2K3000, per the ACPI
DSDT the GPIO controller is compatible with 2K2000, but it fails to
operate GPIOs 62 and 63 (and maybe others) using BIT_CTRL_MODE.
Using BYTE_CTRL_MODE also makes those 2K3000 GPIOs work.
Fixes: 3feb70a61740 ("gpio: loongson: add more gpio chip support")
Cc: stable@vger.kernel.org
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20251128075033.255821-1-xry111@xry111.site
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Link: https://patch.msgid.link/20251123-work-fd-prepare-v4-38-b6efa1706cfd@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
It's possible that the auxiliary proxy device we add when setting up the
GPIO controller exposing shared pins, will get matched and probed
immediately. The gpio-proxy-driver will then retrieve the shared
descriptor structure. That will cause a recursive mutex locking and
a deadlock because we're already holding the gpio_shared_lock in
gpio_device_setup_shared() and try to take it again in
devm_gpiod_shared_get() like this:
[ 4.298346] gpiolib_shared: GPIO 130 owned by f100000.pinctrl is shared by multiple consumers
[ 4.307157] gpiolib_shared: Setting up a shared GPIO entry for speaker@0,3
[ 4.314604]
[ 4.316146] ============================================
[ 4.321600] WARNING: possible recursive locking detected
[ 4.327054] 6.18.0-rc7-next-20251125-g3f300d0674f6-dirty #3887 Not tainted
[ 4.334115] --------------------------------------------
[ 4.339566] kworker/u32:3/71 is trying to acquire lock:
[ 4.344931] ffffda019ba71850 (gpio_shared_lock){+.+.}-{4:4}, at: devm_gpiod_shared_get+0x34/0x2e0
[ 4.354057]
[ 4.354057] but task is already holding lock:
[ 4.360041] ffffda019ba71850 (gpio_shared_lock){+.+.}-{4:4}, at: gpio_device_setup_shared+0x30/0x268
[ 4.369421]
[ 4.369421] other info that might help us debug this:
[ 4.376126] Possible unsafe locking scenario:
[ 4.376126]
[ 4.382198] CPU0
[ 4.384711] ----
[ 4.387223] lock(gpio_shared_lock);
[ 4.390992] lock(gpio_shared_lock);
[ 4.394761]
[ 4.394761] *** DEADLOCK ***
[ 4.394761]
[ 4.400832] May be due to missing lock nesting notation
[ 4.400832]
[ 4.407802] 5 locks held by kworker/u32:3/71:
[ 4.412279] #0: ffff000080020948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x194/0x64c
[ 4.422650] #1: ffff800080963d60 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1bc/0x64c
[ 4.432117] #2: ffff00008165c8f8 (&dev->mutex){....}-{4:4}, at: __device_attach+0x3c/0x198
[ 4.440700] #3: ffffda019ba71850 (gpio_shared_lock){+.+.}-{4:4}, at: gpio_device_setup_shared+0x30/0x268
[ 4.450523] #4: ffff0000810fe918 (&dev->mutex){....}-{4:4}, at: __device_attach+0x3c/0x198
[ 4.459103]
[ 4.459103] stack backtrace:
[ 4.463581] CPU: 6 UID: 0 PID: 71 Comm: kworker/u32:3 Not tainted 6.18.0-rc7-next-20251125-g3f300d0674f6-dirty #3887 PREEMPT
[ 4.463589] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
[ 4.463593] Workqueue: events_unbound deferred_probe_work_func
[ 4.463602] Call trace:
[ 4.463604] show_stack+0x18/0x24 (C)
[ 4.463617] dump_stack_lvl+0x70/0x98
[ 4.463627] dump_stack+0x18/0x24
[ 4.463636] print_deadlock_bug+0x224/0x238
[ 4.463643] __lock_acquire+0xe4c/0x15f0
[ 4.463648] lock_acquire+0x1cc/0x344
[ 4.463653] __mutex_lock+0xb8/0x840
[ 4.463661] mutex_lock_nested+0x24/0x30
[ 4.463667] devm_gpiod_shared_get+0x34/0x2e0
[ 4.463674] gpio_shared_proxy_probe+0x18/0x138
[ 4.463682] auxiliary_bus_probe+0x40/0x78
[ 4.463688] really_probe+0xbc/0x2c0
[ 4.463694] __driver_probe_device+0x78/0x120
[ 4.463701] driver_probe_device+0x3c/0x160
[ 4.463708] __device_attach_driver+0xb8/0x140
[ 4.463716] bus_for_each_drv+0x88/0xe8
[ 4.463723] __device_attach+0xa0/0x198
[ 4.463729] device_initial_probe+0x14/0x20
[ 4.463737] bus_probe_device+0xb4/0xc0
[ 4.463743] device_add+0x578/0x76c
[ 4.463747] __auxiliary_device_add+0x40/0xac
[ 4.463752] gpio_device_setup_shared+0x1f8/0x268
[ 4.463758] gpiochip_add_data_with_key+0xdac/0x10ac
[ 4.463763] devm_gpiochip_add_data_with_key+0x30/0x80
[ 4.463768] msm_pinctrl_probe+0x4b0/0x5e0
[ 4.463779] sm8250_pinctrl_probe+0x18/0x40
[ 4.463784] platform_probe+0x5c/0xa4
[ 4.463793] really_probe+0xbc/0x2c0
[ 4.463800] __driver_probe_device+0x78/0x120
[ 4.463807] driver_probe_device+0x3c/0x160
[ 4.463814] __device_attach_driver+0xb8/0x140
[ 4.463821] bus_for_each_drv+0x88/0xe8
[ 4.463827] __device_attach+0xa0/0x198
[ 4.463834] device_initial_probe+0x14/0x20
[ 4.463841] bus_probe_device+0xb4/0xc0
[ 4.463847] deferred_probe_work_func+0x90/0xcc
[ 4.463854] process_one_work+0x214/0x64c
[ 4.463860] worker_thread+0x1bc/0x360
[ 4.463866] kthread+0x14c/0x220
[ 4.463871] ret_from_fork+0x10/0x20
[ 77.265041] random: crng init done
Fortunately, at the time of creating of the auxiliary device, we already
know the correct entry so let's store it as the device's platform data.
We don't need to hold gpio_shared_lock in devm_gpiod_shared_get() as
we're not removing the entry or traversing the list anymore but we still
need to protect it from concurrent modification of its fields so add a
more fine-grained mutex.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Closes: https://lore.kernel.org/all/fimuvblfy2cmn7o4wzcxjzrux5mwhvlvyxfsgeqs6ore2xg75i@ax46d3sfmdux/
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251128-gpio-shared-deadlock-v2-1-9f3ae8ddcb09@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
User-space must not fiddle with shared-proxy auxiliary devices. Disable
bind/unbind attributes in sysfs.
Link: https://lore.kernel.org/r/20251126191730.66277-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
GPIO hogs have a "gpios" property but it's not a phandle to a remote
node - it references the parent GPIO controller. We must not try to
parse it as a phandle.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Reported-by: Cosmin Tanislav <demonsingur@gmail.com>
Closes: https://lore.kernel.org/all/2d96e464-e17c-4ff5-9a08-b215b77da04f@gmail.com/
Link: https://lore.kernel.org/r/20251126-gpio-shared-fixes-v1-2-18309c0e87b5@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The __symbols__ node is a special, internal node and its properties must
not be considered when scanning the device-tree for shared GPIOs.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/all/0829a21c-f97d-41b6-90bc-2acaec42caab@nvidia.com/
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20251126-gpio-shared-fixes-v1-1-18309c0e87b5@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There's an unexpected interaction between the reset-gpio driver and the
shared GPIO support. The reset-gpio device is an auxiliary device that's
created dynamically and fulfills a similar role to the gpio-shared-proxy
driver but is limited in scope to just supporting the "reset-gpios"
property.
The shared GPIO core code does not take into account that the machine
lookup entry we create when scanning the device-tree must connect the
reset-gpio device - that is the actual consumer of the GPIO and not the
consumer defined on the device tree, which in turn consumes the shared
reset control exposed by the reset-gpio device - to the GPIO controller.
We also must not skip the gpio-shared-proxy driver as it's possible that
a shared GPIO may be used by one consumer as a reset-gpios going through
the reset-gpio device and another that uses GPIOLIB.
We need to make it a special case handled in gpiolib-shared.c. Add a new
function - gpio_shared_dev_is_reset_gpio() - whose role it is to verify
if a non-matching consumer of a shared pin is a reset-gpio device and
make sure it's the right one for this pin. To that end make sure that
its parent is the GPIO controller in question and that the fwnode we
identified as sharing the pin references that controller via the
"reset-gpios" property.
Only include that code if the reset-gpio driver is enabled.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Reported-by: Val Packett <val@packett.cool>
Closes: https://lore.kernel.org/all/3b5d9df5-934d-4591-8827-6c9573a6f7ba@packett.cool/
Tested-by: Val Packett <val@packett.cool>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20251125-gpiolib-shared-reset-gpio-fix-v2-1-4eb6fa41f1dd@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Merge series from Johan Hovold <johan@kernel.org>:
This series fixes device and OF node reference leaks during probe and
a clock prepare imbalance on probe failures.
Included is a related cleanup of an error path.
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-15-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-14-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-13-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-12-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251124002105.25429-11-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-10-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-9-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-8-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-7-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-6-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
The pl061_context_save_regs structure is always embedded into struct
pl061 to simplify code, so this brings a tiny 8 bytes memory overhead
for !CONFIG_PM_SLEEP.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-5-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-4-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251124002105.25429-3-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
