summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/Kconfig
AgeCommit message (Collapse)Author
2025-06-04Merge tag 'pci-v6.16-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Print the actual delay time in pci_bridge_wait_for_secondary_bus() instead of assuming it was 1000ms (Wilfred Mallawa) - Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices', which broke resume from system sleep on AMD platforms and has been fixed by other commits (Lukas Wunner) Resource management: - Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated and unnecessary (Philipp Stanner) - Remove pcim_iounmap_regions() and pcim_request_region_exclusive() and related flags since all uses have been removed (Philipp Stanner) - Rework devres 'request' functions so they are no longer 'hybrid', i.e., their behavior no longer depends on whether pcim_enable_device or pci_enable_device() was used, and remove related code (Philipp Stanner) - Warn (not BUG()) about failure to assign optional resources (Ilpo Järvinen) Error handling: - Log the DPC Error Source ID only when it's actually valid (when ERR_FATAL or ERR_NONFATAL was received from a downstream device) and decode into bus/device/function (Bjorn Helgaas) - Determine AER log level once and save it so all related messages use the same level (Karolina Stolarek) - Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable Errors (Karolina Stolarek) - Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs controls on interval and burst count, to avoid flooding logs and RCU stall warnings (Jon Pan-Doh) Power management: - Increment PM usage counter when probing reset methods so we don't try to read config space of a powered-off device (Alex Williamson) - Set all devices to D0 during enumeration to ensure ACPI opregion is connected via _REG (Mario Limonciello) Power control: - Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match the filename paths. Retain old deprecated symbols for compatibility, except for the pwrctrl slot driver (PCI_PWRCTRL_SLOT) (Johan Hovold) - When unregistering pwrctrl, cancel outstanding rescan work before cleaning up data structures to avoid use-after-free issues (Brian Norris) Bandwidth control: - Simplify link bandwidth controller by replacing the count of Link Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN flag (Ilpo Järvinen) - Update the Link Speed after retraining, since the Link Speed may have changed (Ilpo Järvinen) PCIe native device hotplug: - Ignore Presence Detect Changed caused by DPC. pciehp already ignores Link Down/Up events caused by DPC, but on slots using in-band presence detect, DPC causes a spurious Presence Detect Changed event (Lukas Wunner) - Ignore Link Down/Up caused by Secondary Bus Reset. On hotplug ports using in-band presence detect, the reset causes a Presence Detect Changed event, which mistakenly caused teardown and re-enumeration of the device. Drivers may need to annotate code that resets their device (Lukas Wunner) Virtualization: - Add an ACS quirk for Loongson Root Ports that don't advertise ACS but don't allow peer-to-peer transactions between Root Ports; the quirk allows each Root Port to be in a separate IOMMU group (Huacai Chen) Endpoint framework: - For fixed-size BARs, retain both the actual size and the possibly larger size allocated to accommodate iATU alignment requirements (Jerome Brunet) - Simplify ctrl/SPAD space allocation and avoid allocating more space than needed (Jerome Brunet) - Correct MSI-X PBA offset calculations for DesignWare and Cadence endpoint controllers (Niklas Cassel) - Align the return value (number of interrupts) encoding for pci_epc_get_msi()/pci_epc_ops::get_msi() and pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel) - Align the nr_irqs parameter encoding for pci_epc_set_msi()/pci_epc_ops::set_msi() and pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel) Common host controller library: - Convert pci-host-common to a library so platforms that don't need native host controller drivers don't need to include these helper functions (Manivannan Sadhasivam) Apple PCIe controller driver: - Extract ECAM bridge creation helper from pci_host_common_probe() to separate driver-specific things like MSI from PCI things (Marc Zyngier) - Dynamically allocate RID-to_SID bitmap to prepare for SoCs with varying capabilities (Marc Zyngier) - Skip ports disabled in DT when setting up ports (Janne Grunau) - Add t6020 compatible string (Alyssa Rosenzweig) - Add T602x PCIe support (Hector Martin) - Directly set/clear INTx mask bits because T602x dropped the accessors that could do this without locking (Marc Zyngier) - Move port PHY registers to their own reg items to accommodate T602x, which moves them around; retain default offsets for existing DTs that lack phy%d entries with the reg offsets (Hector Martin) - Stop polling for core refclk, which doesn't work on T602x and the bootloader has already done anyway (Hector Martin) - Use gpiod_set_value_cansleep() when asserting PERST# in probe because we're allowed to sleep there (Hector Martin) Cadence PCIe controller driver: - Drop a runtime PM 'put' to resolve a runtime atomic count underflow (Hans Zhang) - Make the cadence core buildable as a module (Kishon Vijay Abraham I) - Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by loadable drivers when they are removed (Siddharth Vadapalli) Freescale i.MX6 PCIe controller driver: - Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP (Richard Zhu) - Remove redundant dw_pcie_wait_for_link() from imx_pcie_start_link(); since the DWC core does this, imx6 only needs it when retraining for a faster link speed (Richard Zhu) - Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu) - Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in some cases, the controller can't exit 'L23 Ready' through Beacon or PERST# deassertion (Richard Zhu) - Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum: controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8 GT/s, causing timeouts in L1 (Richard Zhu) - Wait for i.MX95 PLL lock before enabling controller (Richard Zhu) - Save/restore i.MX95 LUT for suspend/resume (Richard Zhu) Mobiveil PCIe controller driver: - Return bool (not int) for link-up check in mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans Zhang) NVIDIA Tegra194 PCIe controller driver: - Create debugfs directory for 'aspm_state_cnt' only when CONFIG_PCIEASPM is enabled, since there are no other entries (Hans Zhang) Qualcomm PCIe controller driver: - Add OF support for parsing DT 'eq-presets-<N>gts' property for lane equalization presets (Krishna Chaitanya Chundru) - Read Maximum Link Width from the Link Capabilities register if DT lacks 'num-lanes' property (Krishna Chaitanya Chundru) - Add Physical Layer 64 GT/s Capability ID and register offsets for 8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya Chundru) - Add generic dwc support for configuring lane equalization presets (Krishna Chaitanya Chundru) - Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar) Renesas R-Car PCIe controller driver: - Describe endpoint BAR 4 as being fixed size (Jerome Brunet) - Document how to obtain R-Car V4H (r8a779g0) controller firmware (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Reorder rockchip_pci_core_rsts because reset_control_bulk_deassert() deasserts in reverse order, to fix a link training regression (Jensen Huang) - Mark RK3399 as being capable of raising INTx interrupts (Niklas Cassel) Rockchip DesignWare PCIe controller driver: - Check only PCIE_LINKUP, not LTSSM status, to determine whether the link is up (Shawn Lin) - Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s for Root Complex and Endpoint modes (Shawn Lin) - Hide the broken ATS Capability in rockchip_pcie_ep_init() instead of rockchip_pcie_ep_pre_init() so it stays hidden after PERST# resets non-sticky registers (Shawn Lin) - Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit() (Diederik de Haas) Synopsys DesignWare PCIe controller driver: - Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training more robust; this will not affect the intended link width if all lanes are functional (Wenbin Yao) - Return bool (not int) for link-up check in dw_pcie_ops.link_up() and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay, keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx, tegra194, uniphier, visconti (Hans Zhang) - Add debugfs support for exposing DWC device-specific PTM context (Manivannan Sadhasivam) TI J721E PCIe driver: - Make j721e buildable as a loadable and removable module (Siddharth Vadapalli) - Fix j721e host/endpoint dependencies that result in link failures in some configs (Arnd Bergmann) Device tree bindings: - Add qcom DT binding for 'global' interrupt (PCIe controller and link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p, sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan Sadhasivam) - Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074, ipq8074-gen3, ipq6018 (Manivannan Sadhasivam) - Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang) - Correct indentation and style of examples in brcm,stb-pcie, cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie, microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm (Krzysztof Kozlowski) - Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and armada8k from text to schema DT bindings (Rob Herring) - Remove obsolete .txt DT bindings for content that has been moved to schemas (Rob Herring) - Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074 and IPQ9574 (Varadarajan Narayanan) - Convert v3,v360epc-pci from text to DT schema binding (Rob Herring) - Change microchip,pcie-host DT binding to be 'dma-noncoherent' since PolarFire may be configured that way (Conor Dooley) Miscellaneous: - Drop 'pci' suffix from intel_mid_pci.c filename to match similar files (Andy Shevchenko) - All platforms with PCI have an MMU, so add PCI Kconfig dependency on MMU to simplify build testing and avoid inadvertent build regressions (Arnd Bergmann) - Update Krzysztof Wilczyński's email address in MAINTAINERS (Krzysztof Wilczyński) - Update Manivannan Sadhasivam's email address in MAINTAINERS (Manivannan Sadhasivam)" * tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits) MAINTAINERS: Update Manivannan Sadhasivam email address PCI: j721e: Fix host/endpoint dependencies PCI: j721e: Add support to build as a loadable module PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup PCI: cadence: Add support to build pcie-cadence library as a kernel module MAINTAINERS: Update Krzysztof Wilczyński email address PCI: Remove unnecessary linesplit in __pci_setup_bridge() PCI: WARN (not BUG()) when we fail to assign optional resources PCI: Remove unused pci_printk() PCI: qcom: Replace PERST# sleep time with proper macro PCI: dw-rockchip: Replace PERST# sleep time with proper macro PCI: host-common: Convert to library for host controller drivers PCI/ERR: Remove misleading TODO regarding kernel panic PCI: cadence: Remove duplicate message code definitions PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding PCI: cadence-ep: Correct PBA offset in .set_msix() callback ...
2025-06-04drm/ttm: Fix compile error when CONFIG_SHMEM is not setSteven Rostedt
When CONFIG_SHMEM is not set, the following compiler error occurs: ld: vmlinux.o: in function `ttm_backup_backup_page': (.text+0x10363bc): undefined reference to `shmem_writeout' make[3]: *** [/work/build/trace/nobackup/linux.git/scripts/Makefile.vmlinux:91: vmlinux.unstripped] Error 1 This is due to the replacement of writepage and calling swap_writeout() and shmem_writeout() directly. The issue is that when CONFIG_SHMEM is not defined, shmem_writeout() is also not defined. The function ttm_backup_backup_page() called mapping->a_ops->writepage() which was then changed to call shmem_writeout() directly. Even before commit 84798514db50 ("mm: Remove swap_writepage() and shmem_writepage()"), it didn't make sense to call anything other than shmem_writeout() as the ttm_backup deals only with shmem folios. Have DRM_TTM config option select SHMEM to guarantee that shmem_writeout() is available. Link: https://lore.kernel.org/all/20250602170500.48713a2b@gandalf.local.home/ Suggested-by: Hugh Dickins <hughd@google.com> Fixes: 84798514db50 ("mm: Remove swap_writepage() and shmem_writepage()") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-05-21Merge tag 'nova-next-v6.16-2025-05-20' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/nova into drm-next Nova changes for v6.16 auxiliary: - bus abstractions - implementation for driver registration - add sample driver drm: - implement __drm_dev_alloc() - DRM core infrastructure Rust abstractions - device, driver and registration - DRM IOCTL - DRM File - GEM object - IntoGEMObject rework - generically implement AlwaysRefCounted through IntoGEMObject - refactor unsound from_gem_obj() into as_ref() - refactor into_gem_obj() into as_raw() driver-core: - merge topic/device-context-2025-04-17 from driver-core tree - implement Devres::access() - fix: doctest build under `!CONFIG_PCI` - accessor for Device::parent() - fix: conditionally expect `dead_code` for `parent()` - impl TryFrom<&Device> bus devices (PCI, platform) nova-core: - remove completed Vec extentions from task list - register auxiliary device for nova-drm - derive useful traits for Chipset - add missing GA100 chipset - take &Device<Bound> in Gpu::new() - infrastructure to generate register definitions - fix register layout of NV_PMC_BOOT_0 - move Firmware into own (Rust) module - fix: select AUXILIARY_BUS nova-drm: - initial driver skeleton (depends on drm and auxiliary bus abstractions) - fix: select AUXILIARY_BUS Rust (dependencies): - implement Opaque::zeroed() - implement Revocable::try_access_with() - implement Revocable::access() From: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/aCxAf3RqQAXLDhAj@cassiopeiae
2025-05-12drm: nova-drm: add initial driver skeletonDanilo Krummrich
Add the initial nova-drm driver skeleton. nova-drm is connected to nova-core through the auxiliary bus and implements the DRM parts of the nova driver stack. For now, it implements the fundamental DRM abstractions, i.e. creates a DRM device and registers it, exposing a three sample IOCTLs. DRM_IOCTL_NOVA_GETPARAM - provides the PCI bar size from the bar that maps the GPUs VRAM from nova-core DRM_IOCTL_NOVA_GEM_CREATE - creates a new dummy DRM GEM object and returns a handle DRM_IOCTL_NOVA_GEM_INFO - provides metadata for the DRM GEM object behind a given handle I implemented a small userspace test suite [1] that utilizes this interface. Link: https://gitlab.freedesktop.org/dakr/drm-test [1] Reviewed-by: Maxime Ripard <mripard@kernel.org> Acked-by: Dave Airlie <airlied@redhat.com> Link: https://lore.kernel.org/r/20250424160452.8070-3-dakr@kernel.org [ Kconfig: depend on DRM=y rather than just DRM. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-05-12drm/sitronix: move tiny Sitronix drivers to their own subdirMarcus Folkesson
We start to have support many Sitronix displays in the tiny directory, and we expect more to come. Move them to their own subdirectory. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Suggested-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250512-sitronix-v3-1-bbf6cc413698@gmail.com Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
2025-05-06BackMerge tag 'v6.15-rc5' into drm-nextDave Airlie
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next. Signed-off-by: Dave Airlie <airlied@redhat.com>
2025-04-28drm: Select DRM_KMS_HELPER from DRM_DEBUG_DP_MST_TOPOLOGY_REFSJanne Grunau
Using "depends on" and "select" for the same Kconfig symbol is known to cause circular dependencies (cmp. "Kconfig recursive dependency limitations" in Documentation/kbuild/kconfig-language.rst. DRM drivers are selecting drm helpers so do the same for DRM_DEBUG_DP_MST_TOPOLOGY_REFS. Fixes following circular dependency reported on x86 for the downstream Asahi Linux tree: error: recursive dependency detected! symbol DRM_KMS_HELPER is selected by DRM_GEM_SHMEM_HELPER symbol DRM_GEM_SHMEM_HELPER is selected by RUST_DRM_GEM_SHMEM_HELPER symbol RUST_DRM_GEM_SHMEM_HELPER is selected by DRM_ASAHI symbol DRM_ASAHI depends on RUST symbol RUST depends on CALL_PADDING symbol CALL_PADDING depends on OBJTOOL symbol OBJTOOL is selected by STACK_VALIDATION symbol STACK_VALIDATION depends on UNWINDER_FRAME_POINTER symbol UNWINDER_FRAME_POINTER is part of choice block at arch/x86/Kconfig.debug:224 symbol <choice> unknown is visible depending on UNWINDER_GUESS symbol UNWINDER_GUESS prompt is visible depending on STACKDEPOT symbol STACKDEPOT is selected by DRM_DEBUG_DP_MST_TOPOLOGY_REFS symbol DRM_DEBUG_DP_MST_TOPOLOGY_REFS depends on DRM_KMS_HELPER Fixes: 12a280c72868 ("drm/dp_mst: Add topology ref history tracking for debugging") Cc: stable@vger.kernel.org Signed-off-by: Janne Grunau <j@jannau.net> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250304-drm_debug_dp_mst_topo_kconfig-v1-1-e16fd152f258@jannau.net Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
2025-04-23PCI: Add CONFIG_MMU dependencyArnd Bergmann
It turns out that there are no platforms that have PCI but don't have an MMU, so adding a Kconfig dependency on CONFIG_PCI simplifies build testing kernels for those platforms a lot, and avoids a lot of inadvertent build regressions. Add a dependency for CONFIG_PCI and remove all the ones for PCI specific device drivers that are currently marked not having it. There are a few platforms that have an optional MMU, but they usually cannot have PCI at all. The one exception is Coldfire MCF54xx, but this is mainly for historic reasons, and anyone using those chips should really use the MMU these days. Link: https://lore.kernel.org/lkml/a41f1b20-a76c-43d8-8c36-f12744327a54@app.fastmail.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patch.msgid.link/20250423202215.3315550-1-arnd@kernel.org
2025-04-07Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2025-04-07drm: Move sysfb drivers into separate subdirectoryThomas Zimmermann
The ofdrm and simpledrm drivers are special as they operate on externally provided framebuffers. Move them into their own sub- directory. Will let them share common code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20250401094056.32904-5-tzimmermann@suse.de
2025-03-28Merge tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "Outside of drm there are some rust patches from Danilo who maintains that area in here, and some pieces for drm header check tests. The major things in here are a new driver supporting the touchbar displays on M1/M2, the nova-core stub driver which is just the vehicle for adding rust abstractions and start developing a real driver inside of. xe adds support for SVM with a non-driver specific SVM core abstraction that will hopefully be useful for other drivers, along with support for shrinking for TTM devices. I'm sure xe and AMD support new devices, but the pipeline depth on these things is hard to know what they end up being in the marketplace! uapi: - add mediatek tiled fourcc - add support for notifying userspace on device wedged new driver: - appletbdrm: support for Apple Touchbar displays on m1/m2 - nova-core: skeleton rust driver to develop nova inside off firmware: - add some rust firmware pieces rust: - add 'LocalModule' type alias component: - add helper to query bound status fbdev: - fbtft: remove access to page->index media: - cec: tda998x: import driver from drm dma-buf: - add fast path for single fence merging tests: - fix lockdep warnings atomic: - allow full modeset on connector changes - clarify semantics of allow_modeset and drm_atomic_helper_check - async-flip: support on arbitary planes - writeback: fix UAF - Document atomic-state history format-helper: - support ARGB8888 to ARGB4444 conversions buddy: - fix multi-root cleanup ci: - update IGT dp: - support extended wake timeout - mst: fix RAD to string conversion - increase DPCD eDP control CAP size to 5 bytes - add DPCD eDP v1.5 definition - add helpers for LTTPR transparent mode panic: - encode QR code according to Fido 2.2 scheduler: - add parameter struct for init - improve job peek/pop operations - optimise drm_sched_job struct layout ttm: - refactor pool allocation - add helpers for TTM shrinker panel-orientation: - add a bunch of new quirks panel: - convert panels to multi-style functions - edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3, LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006, Lenovo T14s Gen6 Snapdragon - himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay kd110n11-51ie, Starry 2082109qfh040022-50e - visionox-r66451: use multi-style MIPI-DSI functions - raydium-rm67200: Add driver for Raydium RM67200 - simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17 - sony-td4353-jdi: Use MIPI-DSI multi-func interface - summit: Add driver for Apple Summit display panel - visionox-rm692e5: Add driver for Visionox RM692E5 bridge: - pass full atomic state to various callbacks - adv7511: Report correct capabilities - it6505: Fix HDCP V compare - snd65dsi86: fix device IDs - nwl-dsi: set bridge type - ti-sn65si83: add error recovery and set bridge type - synopsys: add HDMI audio support xe: - support device-wedged event - add mmap support for PCI memory barrier - perf pmu integration and expose per-engien activity - add EU stall sampling support - GPU SVM and Xe SVM implementation - use TTM shrinker - add survivability mode to allow the driver to do firmware updates in critical failure states - PXP HWDRM support for MTL and LNL - expose package/vram temps over hwmon - enable DP tunneling - drop mmio_ext abstraction - Reject BO evcition if BO is bound to current VM - Xe suballocator improvements - re-use display vmas when possible - add GuC Buffer Cache abstraction - PCI ID update for Panther Lake and Battlemage - Enable SRIOV for Panther Lake - Refactor VRAM manager location i915: - enable extends wake timeout - support device-wedged event - Enable DP 128b/132b SST DSC - FBC dirty rectangle support for display version 30+ - convert i915/xe to drm client setup - Compute HDMI PLLS for rates not in fixed tables - Allow DSB usage when PSR is enabled on LNL+ - Enable panel replay without full modeset - Enable async flips with compressed buffers on ICL+ - support luminance based brightness via DPCD for eDP - enable VRR enable/disable without full modeset - allow GuC SLPC default strategies on MTL+ for performance - lots of display refactoring in move to struct intel_display amdgpu: - add device wedged event - support async page flips on overlay planes - enable broadcast RGB drm property - add info ioctl for virt mode - OEM i2c support for RGB lights - GC 11.5.2 + 11.5.3 support - SDMA 6.1.3 support - NBIO 7.9.1 + 7.11.2 support - MMHUB 1.8.1 + 3.3.2 support - DCN 3.6.0 support - Add dynamic workload profile switching for GC 10-12 - support larger VBIOS sizes - Mark gttsize parameters as deprecated - Initial JPEG queue resset support amdkfd: - add KFD per process flags for setting precision - sync pasid values between KGD and KFD - improve GTT/VRAM handling for APUs - fix user queue validation on GC7/8 - SDMA queue reset support raedeon: - rs400 hyperz fix i2c: - td998x: drop platform_data, split driver into media and bridge ast: - transmitter chip detection refactoring - vbios display mode refactoring - astdp: fix connection status and filter unsupported modes - cursor handling refactoring imagination: - check job dependencies with sched helper ivpu: - improve command queue handling - use workqueue for IRQ handling - add support HW fault injection - locking fixes mgag200: - add support for G200eH5 msm: - dpu: add concurrent writeback support for DPU 10.x+ - use LTTPR helpers - GPU: - Fix obscure GMU suspend failure - Expose syncobj timeline support - Extend GPU devcoredump with pagetable info - a623 support - Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot / devcoredump - Display: - Add cpu-cfg interconnect paths on SM8560 and SM8650 - Introduce KMS OMMU fault handler, causing devcoredump snapshot - Fixed error pointer dereference in msm_kms_init_aspace() - DPU: - Fix mode_changing handling - Add writeback support on SM6150 (QCS615) - Fix DSC programming in 1:1:1 topology - Reworked hardware resource allocation, moving it to the CRTC code - Enabled support for Concurrent WriteBack (CWB) on SM8650 - Enabled CDM blocks on all relevant platforms - Reworked debugfs interface for BW/clocks debugging - Clear perf params before calculating bw - Support YUV formats on writeback - Fixed double inclusion - Fixed writeback in YUV formats when using cloned output, Dropped wb2_formats_rgb - Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt kerneldocs - Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode() - DSI: - DSC-related fixes - Rework clock programming - DSI PHY: - Fix 7nm (and lower) PHY programming - Add proper DT schema definitions for DSI PHY clocks - HDMI: - Rework the driver, enabling the use of the HDMI Connector framework - Bindings: - Added eDP PHY on SA8775P nouveau: - move drm_slave_encoder interface into driver - nvkm: refactor GSP RPC - use LTTPR helpers mediatek: - HDMI fixup and refinement - add MT8188 dsc compatible - MT8365 SoC support panthor: - Expose sizes of intenral BOs via fdinfo - Fix race between reset and suspend - Improve locking qaic: - Add support for AIC200 renesas: - Fix limits in DT bindings rockchip: - support rk3562-mali - rk3576: Add HDMI support - vop2: Add new display modes on RK3588 HDMI0 up to 4K - Don't change HDMI reference clock rate - Fix DT bindings - analogix_dp: add eDP support - fix shutodnw solomon: - Set SPI device table to silence warnings - Fix pixel and scanline encoding v3d: - handle clock vc4: - Use drm_exec - Use dma-resv for wait-BO ioctl - Remove seqno infrastructure virtgpu: - Support partial mappings of GEM objects - Reserve VGA resources during initialization - Fix UAF in virtgpu_dma_buf_free_obj() - Add panic support vkms: - Switch to a managed modesetting pipeline - Add support for ARGB8888 - fix UAf xlnx: - Set correct DMA segment size - use mutex guards - Fix error handling - Fix docs" * tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits) drm/amd/pm: Update feature list for smu_v13_0_6 drm/amdgpu: Add parameter documentation for amdgpu_sync_fence drm/amdgpu/discovery: optionally use fw based ip discovery drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics drm/amdgpu/discovery: check ip_discovery fw file available drm/amd/pm: Remove unnecessay UQ10 to UINT conversion drm/amd/pm: Remove unnecessay UQ10 to UINT conversion drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush drm/amd/amdgpu: Increase max rings to enable SDMA page ring drm/amdgpu: Decode deferred error type in gfx aca bank parser drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs drm/amdgpu/mes: clean up SDMA HQD loop drm/amdgpu/mes: enable compute pipes across all MEC drm/amdgpu/mes: drop MES 10.x leftovers drm/amdgpu/mes: optimize compute loop handling drm/amdgpu/sdma: guilty tracking is per instance drm/amdgpu/sdma: fix engine reset handling drm/amdgpu: remove invalid usage of sched.ready drm/amdgpu: add cleaner shader trace point ...
2025-03-24drm: Move some options to separate new KconfigTvrtko Ursulin
Move some options out into a new debug specific kconfig file in order to make things a bit cleaner. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250324092633.49746-2-tvrtko.ursulin@igalia.com
2025-03-20drm/tests: Add kunit tests for bridgesMaxime Ripard
None of the drm_bridge function have kunit tests so far. Let's change that, starting with drm_bridge_get_current_state(). Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-3-511c54a604fb@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-03-11Merge tag 'drm-xe-next-2025-03-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next UAPI Changes: - Expose per-engine activity via perf pmu (Riana, Lucas, Umesh) - Add support for EU stall sampling (Harish, Ashutosh) - Allow userspace to provide low latency hint for submission (Tejas) - GPU SVM and Xe SVM implementation (Matthew Brost) Cross-subsystem Changes: - devres handling for component drivers (Lucas) - Backmege drm-next to allow cross dependent change with i915 - GPU SVM and Xe SVM implementation (Matthew Brost) Core Changes: Driver Changes: - Fixes to userptr and missing validations (Matthew Auld, Thomas Hellström, Matthew Brost) - devcoredump typos and error handling improvement (Shuicheng) - Allow oa_exponent value of 0 (Umesh) - Finish moving device probe to devm (Lucas) - Fix race between submission restart and scheduled being freed (Tejas) - Fix counter overflows in gt_stats (Francois) - Refactor and add missing workarounds and tunings for pre-Xe2 platforms (Aradhya, Tvrtko) - Fix PXP locks interaction with exec queues being killed (Daniele) - Eliminate TIMESTAMP_OVERRIDE from xe (Matt Roper) - Change xe_gen_wa_oob to allow building on MacOS (Daniel Gomez) - New workarounds for Panther Lake (Tejas) - Fix VF resume errors (Satyanarayana) - Fix workaround infra skipping some workarounds dependent on engine initialization (Tvrtko) - Improve per-IP descriptors (Gustavo) - Add more error injections to probe sequence (Francois) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ilc5jvtyaoyi6woyhght5a6sw5jcluiojjueorcyxbynrcpcjp@mw2mi6rd6a7l
2025-03-06drm/gpusvm: Add support for GPU Shared Virtual MemoryMatthew Brost
This patch introduces support for GPU Shared Virtual Memory (SVM) in the Direct Rendering Manager (DRM) subsystem. SVM allows for seamless sharing of memory between the CPU and GPU, enhancing performance and flexibility in GPU computing tasks. The patch adds the necessary infrastructure for SVM, including data structures and functions for managing SVM ranges and notifiers. It also provides mechanisms for allocating, deallocating, and migrating memory regions between system RAM and GPU VRAM. This is largely inspired by GPUVM. v2: - Take order into account in check pages - Clear range->pages in get pages error - Drop setting dirty or accessed bit in get pages (Vetter) - Remove mmap assert for cpu faults - Drop mmap write lock abuse (Vetter, Christian) - Decouple zdd from range (Vetter, Oak) - Add drm_gpusvm_range_evict, make it work with coherent pages - Export drm_gpusvm_evict_to_sram, only use in BO evict path (Vetter) - mmget/put in drm_gpusvm_evict_to_sram - Drop range->vram_alloation variable - Don't return in drm_gpusvm_evict_to_sram until all pages detached - Don't warn on mixing sram and device pages - Update kernel doc - Add coherent page support to get pages - Use DMA_FROM_DEVICE rather than DMA_BIDIRECTIONAL - Add struct drm_gpusvm_vram and ops (Thomas) - Update the range's seqno if the range is valid (Thomas) - Remove the is_unmapped check before hmm_range_fault (Thomas) - Use drm_pagemap (Thomas) - Drop kfree_mapping (Thomas) - dma mapp pages under notifier lock (Thomas) - Remove ctx.prefault - Remove ctx.mmap_locked - Add ctx.check_pages - s/vram/devmem (Thomas) v3: - Fix memory leak drm_gpusvm_range_get_pages - Only migrate pages with same zdd on CPU fault - Loop over al VMAs in drm_gpusvm_range_evict - Make GPUSVM a drm level module - GPL or MIT license - Update main kernel doc (Thomas) - Prefer foo() vs foo for functions in kernel doc (Thomas) - Prefer functions over macros (Thomas) - Use unsigned long vs u64 for addresses (Thomas) - Use standard interval_tree (Thomas) - s/drm_gpusvm_migration_put_page/drm_gpusvm_migration_unlock_put_page (Thomas) - Drop err_out label in drm_gpusvm_range_find_or_insert (Thomas) - Fix kernel doc in drm_gpusvm_range_free_pages (Thomas) - Newlines between functions defs in header file (Thomas) - Drop shall language in driver vfunc kernel doc (Thomas) - Move some static inlines from head to C file (Thomas) - Don't allocate pages under page lock in drm_gpusvm_migrate_populate_ram_pfn (Thomas) - Change check_pages to a threshold v4: - Fix NULL ptr deref in drm_gpusvm_migrate_populate_ram_pfn (Thomas, Himal) - Fix check pages threshold - Check for range being unmapped under notifier lock in get pages (Testing) - Fix characters per line - Drop WRITE_ONCE for zdd->devmem_allocation assignment (Thomas) - Use completion for devmem_allocation->detached (Thomas) - Make GPU SVM depend on ZONE_DEVICE (CI) - Use hmm_range_fault for eviction (Thomas) - Drop zdd worker (Thomas) v5: - Select Kconfig deps (CI) - Set device to NULL in __drm_gpusvm_migrate_to_ram (Matt Auld, G.G.) - Drop Thomas's SoB (Thomas) - Add drm_gpusvm_range_start/end/size helpers (Thomas) - Add drm_gpusvm_notifier_start/end/size helpers (Thomas) - Absorb drm_pagemap name changes (Thomas) - Fix driver lockdep assert (Thomas) - Move driver lockdep assert to static function (Thomas) - Assert mmap lock held in drm_gpusvm_migrate_to_devmem (Thomas) - Do not retry forever on eviction (Thomas) v6: - Fix drm_gpusvm_get_devmem_page alignment (Checkpatch) - Modify Kconfig (CI) - Compile out lockdep asserts (CI) v7: - Add kernel doc for flags fields (CI, Auld) Cc: Simona Vetter <simona.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: <dri-devel@lists.freedesktop.org> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-7-matthew.brost@intel.com
2025-03-03drm: adp: Add Apple Display Pipe driverSasha Finkelstein
This display controller is present on M-series chips and is used to drive the touchbar display. Co-developed-by: Janne Grunau <j@jannau.net> Signed-off-by: Janne Grunau <j@jannau.net> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250224-adpdrm-v8-2-cccf96710f0f@gmail.com Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
2025-02-13drm/i2c: move TDA998x driver under drivers/gpu/drm/bridgeDmitry Baryshkov
TDA998x is the HDMI bridge driver, incorporating drm_connector and optional drm_encoder (created via the component bind API by the TICLDC and HDLCD drivers). Thus it should be residing together with the other DRM bridge drivers under drivers/gpu/drm/bridge/. Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250113-drm-move-tda998x-v3-3-214e0682a5e4@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-12drm: ensure drm headers are self-contained and pass kernel-docJani Nikula
Ensure drm headers build, are self-contained, have header guards, and have no kernel-doc warnings, when CONFIG_DRM_HEADER_TEST=y. The mechanism follows similar patters used in i915, xe, and usr/include. To cover include/drm, we need to recurse there using the top level Kbuild and the new include/Kbuild files. v4: check for CONFIG_WERROR in addition to CONFIG_DRM_WERROR v3: adapt to upstream build changes v2: make DRM_HEADER_TEST depend on DRM Suggested-by: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Simona Vetter <simona.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/d8ad1c6d707f38a55987f616cb9650aef30b84e1.1737556766.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-01-24Merge tag 'drm-misc-fixes-2025-01-24' of ↵Simona Vetter
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next Short summary of fixes pull: bochs: - Fix double-free on driver removal client: - Improve support for tile-based modes - Fix fbdev Kconfig select rules xlnx: - zynqmp_dp: Add locking to DP-bridge enable helper Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250124082932.GA13715@linux.fritz.box
2025-01-22drm: select DRM_KMS_HELPER from DRM_GEM_SHMEM_HELPERArnd Bergmann
In the combination of DRM_KMS_HELPER=m, DRM_GEM_SHMEM_HELPER=y, DRM_FBDEV_EMULATION=y, The shmem code fails to link against the KMS helpers: x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_driver_fbdev_probe': (.text+0xeec601): undefined reference to `drm_fb_helper_alloc_info' x86_64-linux-ld: (.text+0xeec633): undefined reference to `drm_fb_helper_fill_info' x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_get_page': drm_fbdev_shmem.c:(.text+0xeec7d2): undefined reference to `drm_gem_fb_get_obj' x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_fb_mmap': drm_fbdev_shmem.c:(.text+0xeec9f6): undefined reference to `drm_gem_fb_get_obj' x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_defio_imageblit': (.rodata+0x5b2288): undefined reference to `drm_fb_helper_check_var' x86_64-linux-ld: (.rodata+0x5b2290): undefined reference to `drm_fb_helper_set_par' This can happen for a number of device drivers that select DRM_GEM_SHMEM_HELPER without also selecting DRM_KMS_HELPER. To work around this, add another select that forces DRM_KMS_HELPER to be built-in rather than a loadable module, but only if FBDEV emulation is also enabled. DRM_TTM_HELPER and DRM_GEM_DMA_HELPER look like they have the same problem in theory even if there is no possible configuration that shows it. For consistency, do the same change to those. Closes: https://lore.kernel.org/all/20250121-greedy-flounder-of-abundance-4d2ee8-mkl@pengutronix.de Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250122090211.3161186-1-arnd@kernel.org
2025-01-10Merge tag 'v6.13-rc6' into drm-nextDave Airlie
This backmerges Linux 6.13-rc6 this is need for the newer pulls. Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-12-17drm: rework FB_CORE dependencyArnd Bergmann
The 'select FB_CORE' statement moved from CONFIG_DRM to DRM_CLIENT_LIB, but there are now configurations that have code calling into fb_core as built-in even though the client_lib itself is a loadable module: x86_64-linux-ld: drivers/gpu/drm/drm_fb_helper.o: in function `drm_fb_helper_set_suspend': drm_fb_helper.c:(.text+0x2c6): undefined reference to `fb_set_suspend' x86_64-linux-ld: drivers/gpu/drm/drm_fb_helper.o: in function `drm_fb_helper_resume_worker': drm_fb_helper.c:(.text+0x2e1): undefined reference to `fb_set_suspend' In addition to DRM_CLIENT_LIB, the 'select' needs to be at least in DRM_KMS_HELPER and DRM_GEM_SHMEM_HELPER, so add it here. This patch is the KMS_HELPER part of [1]. Fixes: dadd28d4142f ("drm/client: Add client-lib module") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/series/141411/ # 1 Link: https://patchwork.freedesktop.org/patch/msgid/20241216074450.8590-4-tzimmermann@suse.de Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-12-17drm/fbdev: Select FB_CORE dependency for fbdev on DMA and TTMThomas Zimmermann
Select FB_CORE if GEM's DMA and TTM implementations support fbdev emulation. Fixes linker errors about missing symbols from the fbdev subsystem. Also see [1] for a related SHMEM fix. Fixes: dadd28d4142f ("drm/client: Add client-lib module") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/series/141411/ # 1 Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/20241216074450.8590-3-tzimmermann@suse.de
2024-12-10drm/panic: Move drawing functions to drm_drawJocelyn Falempe
Move the color conversions, blit and fill functions to drm_draw.c, so that they can be re-used by drm_log. drm_draw is internal to the drm subsystem, and shouldn't be used by gpu drivers. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20241204160014.1171469-2-jfalempe@redhat.com
2024-12-10drm: rework FB_CORE dependencyArnd Bergmann
The 'select FB_CORE' statement moved from CONFIG_DRM to DRM_CLIENT_LIB, but there are now configurations that have code calling into fb_core as built-in even though the client_lib itself is a loadable module: x86_64-linux-ld: drivers/gpu/drm/drm_fbdev_shmem.o: in function `drm_fbdev_shmem_driver_fbdev_probe': drm_fbdev_shmem.c:(.text+0x1fc): undefined reference to `fb_deferred_io_init' x86_64-linux-ld: drivers/gpu/drm/drm_fbdev_shmem.o: in function `drm_fbdev_shmem_fb_destroy': drm_fbdev_shmem.c:(.text+0x2e1): undefined reference to `fb_deferred_io_cleanup' In addition to DRM_CLIENT_LIB, the 'select' needs to be at least in two more parts, DRM_KMS_HELPER and DRM_GEM_SHMEM_HELPER, so add those here. v3: - Remove FB_CORE from DRM_KMS_HELPER to avoid circular dependency Fixes: dadd28d4142f ("drm/client: Add client-lib module") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20241115162323.3555229-1-arnd@kernel.org
2024-11-21drm: Add panel backlight quirksThomas Weißschuh
Panels using a PWM-controlled backlight source do not have a standard way to communicate their valid PWM ranges. On x86 the ranges are read from ACPI through driver-specific tables. The built-in ranges are not necessarily correct, or may grow stale if an older device can be retrofitted with newer panels. Add a quirk infrastructure with which the minimum valid backlight value can be maintained as part of the kernel. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Tested-by: Dustin L. Howett <dustin@howett.net> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241111-amdgpu-min-backlight-quirk-v7-1-f662851fda69@weissschuh.net
2024-11-15drm: Move client code to clients/ subdirectoryThomas Zimmermann
Just move some files around to keep source code well organized. Plus fix a type in the help text of CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-2-tzimmermann@suse.de
2024-10-18drm/client: Add client-lib moduleThomas Zimmermann
Add drm_client_lib.ko to contain DRM's built-in client. Move the existing client for fbdev emulation into the new module. Protect the new module behind CONFIG_DRM_CLIENT_LIB. The Kconfig rules separate the DRM drivers from the DRM clients. A driver can opt into the default clients, but the user configures each client individually. To do so, DRM drivers still select DRM_CLIENT_SELECTION. The option is now a tristate that further selects all dependencies of the enabled DRM clients. There's a menu option for each client. Enabling at least one client also selects DRM_CLIENT_SETUP, so that drivers call drm_client_setup(). New DRM clients should depend on DRM_CLIENT_SELECTION. There are existing kernel options in drm_fb_helper.o, so leave this file in the KMS-helper module for now. v5: - leave fbdev helpers in drm_kms_helper.ko for now v3: - fix commit changelog v2: - keep client code in core - protect lib with DRM_CLIENT_LIB - remove duplicate line from Makefile (Jocelyn) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241014085740.582287-13-tzimmermann@suse.de
2024-10-18drm/client: Make client support optionalThomas Zimmermann
Only build client code if DRM_CLIENT has been selected. Automatially do so if one of the default clients has been enabled. If client support has been disabled, the helpers for client-related events are empty and the regular client functions are not present. Amdgpu has an internal DRM client, so it has to select DRM_CLIENT by itself unconditionally. v3: - provide empty drm_client_debugfs_init() if DRM_CLIENT=n (kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Xinhui Pan <Xinhui.Pan@amd.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241014085740.582287-12-tzimmermann@suse.de
2024-10-18drm/fbdev: Select fbdev I/O helpers from modules that require themThomas Zimmermann
Fbdev emulation for SHMEM and TTM requires helpers from the fbdev subsystem. Select them from the modules that use them instead of the core DRM module. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241014085740.582287-5-tzimmermann@suse.de
2024-10-18drm/fbdev-dma: Select FB_DEFERRED_IOThomas Zimmermann
Commit 808a40b69468 ("drm/fbdev-dma: Implement damage handling and deferred I/O") added deferred I/O for fbdev-dma. Also select the Kconfig symbol FB_DEFERRED_IO (via FB_DMAMEM_HELPERS_DEFERRED). Fixes build errors about missing fbdefio, such as drivers/gpu/drm/drm_fbdev_dma.c:218:26: error: 'struct drm_fb_helper' has no member named 'fbdefio' 218 | fb_helper->fbdefio.delay = HZ / 20; | ^~ drivers/gpu/drm/drm_fbdev_dma.c:219:26: error: 'struct drm_fb_helper' has no member named 'fbdefio' 219 | fb_helper->fbdefio.deferred_io = drm_fb_helper_deferred_io; | ^~ drivers/gpu/drm/drm_fbdev_dma.c:221:21: error: 'struct fb_info' has no member named 'fbdefio' 221 | info->fbdefio = &fb_helper->fbdefio; | ^~ drivers/gpu/drm/drm_fbdev_dma.c:221:43: error: 'struct drm_fb_helper' has no member named 'fbdefio' 221 | info->fbdefio = &fb_helper->fbdefio; | ^~ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202410050241.Mox9QRjP-lkp@intel.com/ Fixes: 808a40b69468 ("drm/fbdev-dma: Implement damage handling and deferred I/O") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: <stable@vger.kernel.org> # v6.11+ Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241014085740.582287-4-tzimmermann@suse.de
2024-10-14drm/panic: Select ZLIB_DEFLATE for DRM_PANIC_SCREEN_QR_CODEMiguel Ojeda
Under `CONFIG_DRM_PANIC_SCREEN_QR_CODE=y`, zlib is used: ld.lld: error: undefined symbol: zlib_deflate_workspacesize >>> referenced by drm_panic.c >>> drivers/gpu/drm/drm_panic.o:(drm_panic_qr_init) in archive vmlinux.a Thus select `CONFIG_ZLIB_DEFLATE`. Fixes: cb5164ac43d0 ("drm/panic: Add a QR code panic screen") Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241003230734.653717-1-ojeda@kernel.org
2024-09-26drm/hyperv_drm: Run DRM default client setupThomas Zimmermann
Call drm_client_setup() to run the kernel's default client setup for DRM. Set fbdev_probe in struct drm_driver, so that the client setup can start the common fbdev client. v5: - select DRM_CLIENT_SELECTION Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Deepak Rawat <drawat.floss@gmail.com> Reviewed-by: Deepak Rawat <drawat.floss@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-56-tzimmermann@suse.de
2024-09-26drm: Add client-agnostic setup helperThomas Zimmermann
DRM may support multiple in-kernel clients that run as soon as a DRM driver has been registered. To select the client(s) in a single place, introduce drm_client_setup(). Drivers that call the new helper automatically instantiate the kernel's configured default clients. Only fbdev emulation is currently supported. Later versions can add support for DRM-based logging, a boot logo or even a console. Some drivers handle the color mode for clients internally. Provide the helper drm_client_setup_with_color_mode() for them. Using the new interface requires the driver to select DRM_CLIENT_SELECTION in its Kconfig. For now this only enables the client-setup helpers if the fbdev client has been configured by the user. A future patchset will further modularize client support and rework DRM_CLIENT_SELECTION to select the correct dependencies for all its clients. v5: - add CONFIG_DRM_CLIENT_SELECTION und DRM_CLIENT_SETUP v4: - fix docs for drm_client_setup_with_fourcc() (Geert) v3: - fix build error v2: - add drm_client_setup_with_fourcc() (Laurent) - push default-format handling into actual clients Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-5-tzimmermann@suse.de
2024-08-23drm/panic: Add a QR code panic screenJocelyn Falempe
This patch adds a new panic screen, with a QR code and the kmsg data embedded. If DRM_PANIC_SCREEN_QR_CODE_URL is set, then the kmsg data will be compressed with zlib and encoded as a numerical segment, and appended to the URL as a URL parameter. This allows to save space, and put about ~7500 bytes of kmsg data, in a V40 QR code. Linux distributions can customize the URL, and put a web frontend to directly open a bug report with the kmsg data. Otherwise the kmsg data will be encoded as a binary segment (ie raw ascii) and only a maximum of 2953 bytes of kmsg data will be available in the QR code. You can also limit the QR code size with DRM_PANIC_SCREEN_QR_VERSION. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240822073852.562286-5-jfalempe@redhat.com
2024-08-08Merge tag 'drm-misc-next-2024-08-01' of ↵Daniel Vetter
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.12: UAPI Changes: virtio: - Define DRM capset Cross-subsystem Changes: dma-buf: - heaps: Clean up documentation printk: - Pass description to kmsg_dump() Core Changes: CI: - Update IGT tests - Point upstream repo to GitLab instance modesetting: - Introduce Power Saving Policy property for connectors - Add might_fault() to drm_modeset_lock priming - Add dynamic per-crtc vblank configuration support panic: - Avoid build-time interference with framebuffer console docs: - Document Colorspace property scheduler: - Remove full_recover from drm_sched_start TTM: - Make LRU walk restartable after dropping locks - Allow direct reclaim to allocate local memory Driver Changes: amdgpu: - Support Power Saving Policy connector property ast: - astdp: Support AST2600 with VGA; Clean up HPD bridge: - Silence error message on -EPROBE_DEFER - analogix: Clean aup - bridge-connector: Fix double free - lt6505: Disable interrupt when powered off - tc358767: Make default DP port preemphasis configurable gma500: - Update i2c terminology ivpu: - Add MODULE_FIRMWARE() lcdif: - Fix pixel clock loongson: - Use GEM refcount over TTM's mgag200: - Improve BMC handling - Support VBLANK intterupts nouveau: - Refactor and clean up internals - Use GEM refcount over TTM's panel: - Shutdown fixes plus documentation - Refactor several drivers for better code sharing - boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus DT; Fix porch parameter - edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2, CMN N116BCP-EA2, CSW MNB601LS1-4 - himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT - ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT - jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor for code sharing sti: - Fix module owner stm: - Avoid UAF wih managed plane and CRTC helpers - Fix module owner - Fix error handling in probe - Depend on COMMON_CLK - ltdc: Fix transparency after disabling plane; Remove unused interrupt tegra: - Call drm_atomic_helper_shutdown() v3d: - Clean up perfmon vkms: - Clean up Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240801121406.GA102996@linux.fritz.box
2024-07-30Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard
Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-07-29Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get a late RC of v6.10 before moving into v6.11. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-07-19drm/panic: Remove build time dependency with FRAMEBUFFER_CONSOLEJocelyn Falempe
Now that fbcon has the skip_panic option, there is no more conflicts between drm_panic and fbcon. Remove the build time dependency, so they can be both enabled. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240717090102.968152-4-jfalempe@redhat.com
2024-07-16drm/gpuvm: fix missing dependency to DRM_EXECDanilo Krummrich
In commit 50c1a36f594b ("drm/gpuvm: track/lock/validate external/evicted objects") we started using drm_exec, but did not select DRM_EXEC in the Kconfig for DRM_GPUVM, fix this. Cc: Christian König <christian.koenig@amd.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Fixes: 50c1a36f594b ("drm/gpuvm: track/lock/validate external/evicted objects") Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240715135158.133287-1-dakr@redhat.com
2024-07-05Merge v6.10-rc6 into drm-nextDaniel Vetter
The exynos-next pull is based on a newer -rc than drm-next. hence backmerge first to make sure the unrelated conflicts we accumulated don't end up randomly in the exynos merge pull, but are separated out. Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma code, and cherry-pick conflict in xe. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2024-06-27drm/panic: Do not select DRM_KMS_HELPERGeert Uytterhoeven
DRM core code cannot call into DRM helper code, as this would lead to circular references in the modular case. Hence drop the selection of DRM_KMS_HELPER. It was unused anyway, as v10 switched from using the DRM format helpers to its own color format conversion, cfr. commit 9544309775c3 ("drm/panic: Add support for color format conversion"). Remove the unneeded include of <drm/drm_format_helper.h>. Fixes: bf9fb17c6672 ("drm/panic: Add a drm panic handler") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/60155f8c939ed286e324a7c12a1daa69fe49fcf6.1719391132.git.geert+renesas@glider.be
2024-06-24drm/panic: Spelling s/formater/formatter/Geert Uytterhoeven
Fix a misspelling of "formatter". Fixes: 54034bebb22fd4be ("drm/panic: Add a kmsg panic screen") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/5a11f8caf8759aaa22d421034d3047368e9d5f33.1718305355.git.geert+renesas@glider.be
2024-06-24drm/ttm/tests: Add tests with mock resource managersKarolina Stolarek
Add mock resource manager to test ttm_bo_validate() with non-system placements. Update KConfig entry to enable DRM Buddy allocator, used by the mock manager. Update move function to do more than just assign a resource. Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com> Tested-by: Somalapuram, Amaranath <asomalap@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/664791dbb7cbada29e705d2fcaf176023f1b8649.1718192625.git.karolina.stolarek@intel.com
2024-06-18drm/panic: depends on !VT_CONSOLEJocelyn Falempe
The race condition between fbcon and drm_panic can only occurs if VT_CONSOLE is set. So update drm_panic dependency accordingly. This will make it easier for Linux distributions to enable drm_panic by disabling VT_CONSOLE, and keeping fbcon terminal. The only drawback is that fbcon won't display the boot kmsg, so it should rely on userspace to do that. At least plymouth already handle this case with https://gitlab.freedesktop.org/plymouth/plymouth/-/merge_requests/224 Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240613154041.325964-1-jfalempe@redhat.com
2024-06-10drm/panic: Add a kmsg panic screenJocelyn Falempe
Add a kmsg option, which will display the last lines of kmsg, and should be similar to fbcon. Add a drm.panic_screen module parameter, so you can choose between the different panic screens available. two options currently, but more will be added later: * "user": a short message telling the user to reboot the machine. * "kmsg": fill the screen with the last lines of kmsg. You can even change it at runtime by writing to /sys/module/drm/parameters/panic_screen v2: * Use module parameter instead of Kconfig choice (Javier Martinez Canillas) v3: * Add help for module parameter usage in Kconfig (Javier Martivez Canillas) * Fix use of font->height before checking it isn't null. (kernel test robot, Dan Carpenter) Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240603095343.39588-4-jfalempe@redhat.com
2024-06-07drm: have config DRM_WERROR depend on !WERRORJani Nikula
If WERROR is already enabled, there's no point in enabling DRM_WERROR or asking users about it. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Closes: https://lore.kernel.org/r/CAHk-=whxT8D_0j=bjtrvj-O=VEOjn6GW8GK4j2V+BiDUntZKAQ@mail.gmail.com Fixes: f89632a9e5fa ("drm: Add CONFIG_DRM_WERROR") Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240516083343.1375687-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-05-28drm/tests: Add output bpc testsMaxime Ripard
Now that we're tracking the output bpc count in the connector state, let's add a few tests to make sure it works as expected. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev> Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-6-c5af16c3aae2@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-05-02drm: move DRM-related CONFIG options into DRM submenuMasahiro Yamada
When you create a submenu using the 'menu' syntax, there is no ambiguity about its end because the code between 'menu' and 'endmenu' becomes the submenu. In contrast, 'menuconfig' does not have the corresponding end marker. Instead, the end of the submenu is inferred from symbol dependencies. This is detailed in Documentation/kbuild/kconfig-language.rst, starting line 348. It outlines two methods to place the code under the submenu: (1) Open an if-block immediately after 'menuconfig', enclosing the submenu content within it (2) Add 'depends on' to every symbol intended for the submenu Many subsystems opt for (1) because it reliably maintains the submenu structure. The DRM subsystem adopts (2). The submenu ends when the sequence of 'depends on DRM' breaks. It can be confirmed by running a GUI frontend such as 'make menuconfig' and visiting the DRM menu: < > Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) ---- If you toggle this, you will notice most of the DRM-related options appear below it, not in the submenu. I highly recommend the approach (1). Obviously, (2) is not reliable, as the submenu breaks whenever someone forgets to add 'depends on DRM'. This commit encloses the entire DRM configuration with 'if DRM' and 'endif', except for DRM_PANEL_ORIENTATION_QUIRKS. Note: Now, 'depends on DRM' properties inside the if-block are all redundant. I leave it as follow-up cleanups. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240426135602.2500125-1-masahiroy@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-05-02Revert "drm: Switch DRM_DISPLAY_HELPER to depends on"Geert Uytterhoeven
This reverts commit e075e496f516bf92bc0cbaf94d64e8d4a6b58321, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/1ba76cc4d96a8afefff5d1bc42fb1e1329c5da68.1713780345.git.geert+renesas@glider.be Signed-off-by: Maxime Ripard <mripard@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-18 05:32:42 +0000