Age | Commit message (Collapse) | Author |
|
[Why & How]
Add support for 2nd sharpening range for cases where we want
override existing DCN sharpening range.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Default should be 1 to disable EASF narrow filter sharpening.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We check for a NULL divisor but don't act on it.
This check does nothing other than throw a warning.
It does confuse static checkers though:
See https://lkml.org/lkml/2025/4/26/371
[How]
Drop the ASSERTs in both DC and SPL variants.
Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)")
Fixes: 6efc0ab3b05d ("drm/amd/display: add back quality EASF and ISHARP and dc dependency changes")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
When always scale flag is set at the API level, the number of taps
should not be overridden to zero in the identity scaling ratio case,
and luma scale should not be set to bypass regardless of luma scale
ratio
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Jesse Agate <jesse.agate@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This macro guard "__cplusplus" is unnecessary and should not be there.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Removes unused header
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
In order to avoid component conflicts, spl namespace is needed.
[How]
Adding SPL namespace to the public API os that each user of SPL can have
their own namespace.
Signed-off-by: Navid Assadian <Navid.Assadian@amd.com>
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Some of unit tests use large scaling ratio such that when we
calculate optimal number of taps, max_taps is negative.
Then in recent change, we changed max_taps to uint instead
of int so now max_taps wraps and is positive. This change
changed the behaviour from returning back false to return
true and breaks unit test check
[How]
Add check to prevent max_taps from wrapping and set to 0
instead
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
IDENTITY_RATIO check uses 2 bits for integer, which only allows
checking downscale ratios up to 3. But we support up to 6x
downscale
[How]
Update IDENTITY_RATIO to check 3 bits for integer
Add ASSERT to catch if we downscale more than 6x
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The mismatch type comparison/assignment may cause data loss. Since the
values are always non-negative, it is safe to use unsigned variables to
resolve the mismatch.
Signed-off-by: Navid Assadian <navid.assadian@amd.com>
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
For subsampled YUV output formats, more pixels can get fetched and be
used for scaling.
[How]
Add the adjustment to the calculated recout, so the viewport covers the
corresponding pixels on the source plane.
Signed-off-by: Navid Assadian <Navid.Assadian@amd.com>
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Passing uint into uchar function param. Pass uint instead
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Remove unused filters and functions
Add static to limit scope
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Instead of converting tables from s1_10 to s1_12, add s1_12 tables instead.
Remove init calls that do the conversion. Add APIs to read s1_10 tables
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
LLS policy not affected by TF.
Remove check in don't care case and use
pixel format only.
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
- Move SPL from dc/spl to dc/sspl
- Update build files and header paths
- Remove dc/spl files
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|