summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm/dp
AgeCommit message (Collapse)Author
2025-06-09drm/msm/dp: Disable wide bus support for SDM845James A. MacInnes
When widebus was enabled for DisplayPort in commit c7c412202623 ("drm/msm/dp: enable widebus on all relevant chipsets") it was clarified that it is only supported on DPU 5.0.0 onwards which includes SC7180 on DPU revision 6.2. However, this patch missed that the description structure for SC7180 is also reused for SDM845 (because of identical io_start address) which is only DPU 4.0.0, leading to a wrongly enbled widebus feature and corruption on that platform. Create a separate msm_dp_desc_sdm845 structure for this SoC compatible, with the wide_bus_supported flag turned off. Fixes: c7c412202623 ("drm/msm/dp: enable widebus on all relevant chipsets") Signed-off-by: James A. MacInnes <james.a.macinnes@gmail.com> [DB: reworded commit text following Marijn's suggestion] Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/636944/ Link: https://lore.kernel.org/r/20250212-sdm845_dp-v2-1-4954e51458f4@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dp: Introduce link training per-segment for LTTPRsAleksandrs Vinarskis
DisplayPort requires per-segment link training when LTTPR are switched to non-transparent mode, starting with LTTPR closest to the source. Only when each segment is trained individually, source can link train to sink. Implement per-segment link traning when LTTPR(s) are detected, to support external docking stations. On higher level, changes are: * Pass phy being trained down to all required helpers * Run CR, EQ link training per phy * Set voltage swing, pre-emphasis levels per phy Since at least some LTTPRs (eg. Parade PS8830) do not correctly report voltage-swing, pre-emphasis level 3 support, always assume level 3 is supported. This is permitted under DP 2.1(a) section 3.6.7.2 stating that LTTPR shall set its transmitter levels as close as possible to those requested by the DPTX, if the DPTX sets the voltage swing or pre-emphasis to a level that the LTTPR does not support. It shall be noted that LTTPR’s level choosing is implementation-specific. This ensures successful link training both when connected directly to the monitor (single LTTPR onboard most X1E laptops) and via the docking station (at least two LTTPRs). Fixes: 72d0af4accd9 ("drm/msm/dp: Add support for LTTPR handling") Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P Tested-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Rob Clark <robdclark@gmail.com> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/652305/ Link: https://lore.kernel.org/r/20250507230113.14270-5-alex.vinarskis@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dp: Prepare for link training per-segment for LTTPRsAleksandrs Vinarskis
Per-segment link training requires knowing the number of LTTPRs (if any) present. Store the count during LTTPRs' initialization. Fixes: 72d0af4accd9 ("drm/msm/dp: Add support for LTTPR handling") Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P Tested-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/652306/ Link: https://lore.kernel.org/r/20250507230113.14270-4-alex.vinarskis@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dp: Account for LTTPRs capabilitiesAleksandrs Vinarskis
Take into account LTTPR capabilities when selecting maximum allowed link rate, number of data lines. Fixes: 72d0af4accd9 ("drm/msm/dp: Add support for LTTPR handling") Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P Tested-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/652302/ Link: https://lore.kernel.org/r/20250507230113.14270-3-alex.vinarskis@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dp: Fix support of LTTPR initializationAleksandrs Vinarskis
Initialize LTTPR before msm_dp_panel_read_sink_caps, as DPTX shall (re)read DPRX caps after LTTPR detection, as required by DP 2.1a, Section 3.6.7.6.1. Fixes: 72d0af4accd9 ("drm/msm/dp: Add support for LTTPR handling") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P Tested-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/652301/ Link: https://lore.kernel.org/r/20250507230113.14270-2-alex.vinarskis@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-02drm/msm/dp: reuse generic HDMI codec implementationDmitry Baryshkov
The MSM DisplayPort driver implements several HDMI codec functions in the driver, e.g. it manually manages HDMI codec device registration, returning ELD and plugged_cb support. In order to reduce code duplication reuse drm_hdmi_audio_* helpers and drm_bridge_connector integration. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/649728/ Link: https://lore.kernel.org/r/20250423-dp-hdmi-audio-v7-1-8407a23e55b2@oss.qualcomm.com
2025-04-29drm/msm/dp: convert to devm_drm_bridge_alloc() APILuca Ceresoli
This is the new API for allocating DRM bridges. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250424-drm-bridge-convert-to-alloc-api-v2-16-8f91a404d86b@bootlin.com Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
2025-04-07Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2025-03-25drm/display: dp: change drm_dp_dpcd_read_link_status() return valueDmitry Baryshkov
drm_dp_dpcd_read_link_status() follows the "return error code or number of bytes read" protocol, with the code returning less bytes than requested in case of some errors. However most of the drivers interpreted that as "return error code in case of any error". Switch drm_dp_dpcd_read_link_status() to drm_dp_dpcd_read_data() and make it follow that protocol too. Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250324-drm-rework-dpcd-access-v4-2-e80ff89593df@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-02-25drm/msm: Use str_enable_disable-like helpersKrzysztof Kozlowski
Replace ternary (condition ? "enable" : "disable") syntax with helpers from string_choices.h because: 1. Simple function call with one argument is easier to read. Ternary operator has three arguments and with wrapping might lead to quite long code. 2. Is slightly shorter thus also easier to read. 3. It brings uniformity in the text - same string. 4. Allows deduping by the linker, which results in a smaller binary file. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/632406/ Link: https://lore.kernel.org/r/20250114191724.861601-1-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-25drm/msm/dp: Add support for LTTPR handlingAbel Vesa
Link Training Tunable PHY Repeaters (LTTPRs) are defined in DisplayPort 1.4a specification. As the name suggests, these PHY repeaters are capable of adjusting their output for link training purposes. According to the DisplayPort standard, LTTPRs have two operating modes: - non-transparent - it replies to DPCD LTTPR field specific AUX requests, while passes through all other AUX requests - transparent - it passes through all AUX requests. Switching between these two modes is done by the DPTX by issuing an AUX write to the DPCD PHY_REPEATER_MODE register. The msm DP driver is currently lacking any handling of LTTPRs. This means that if at least one LTTPR is found between DPTX and DPRX, the link training would fail if that LTTPR was not already configured in transparent mode. The section 3.6.6.1 from the DisplayPort v2.0 specification mandates that before link training with the LTTPR is started, the DPTX may place the LTTPR in non-transparent mode by first switching to transparent mode and then to non-transparent mode. This operation seems to be needed only on first link training and doesn't need to be done again until device is unplugged. It has been observed on a few X Elite-based platforms which have such LTTPRs in their board design that the DPTX needs to follow the procedure described above in order for the link training to be successful. So add support for reading the LTTPR DPCD caps to figure out the number of such LTTPRs first. Then, for platforms (or Type-C dongles) that have at least one such an LTTPR, set its operation mode to transparent mode first and then to non-transparent, just like the mentioned section of the specification mandates. Tested-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250203-drm-dp-msm-add-lttpr-transparent-mode-set-v5-4-c865d0e56d6e@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-25Merge tag 'v6.14-rc4' into drm-nextDave Airlie
Backmerge Linux 6.14-rc4 at the request of tzimmermann so misc-next can base on rc4. Signed-off-by: Dave Airlie <airlied@redhat.com>
2025-02-21Merge tag 'drm-msm-fixes-2025-02-20' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.14-rc4 Display: * More catalog fixes: - to skip watchdog programming through top block if its not present - fix the setting of WB mask to ensure the WB input control is programmed correctly through ping-pong - drop lm_pair for sm6150 as that chipset does not have any 3dmerge block * Fix the mode validation logic for DP/eDP to account for widebus (2ppc) to allow high clock resolutions * Fix to disable dither during encoder disable as otherwise this was causing kms_writeback failure due to resource sharing between * WB and DSI paths as DSI uses dither but WB does not * Fixes for virtual planes, namely to drop extraneous return and fix uninitialized variables * Fix to avoid spill-over of DSC encoder block bits when programming the bits-per-component * Fixes in the DSI PHY to protect against concurrent access of PHY_CMN_CLK_CFG regs between clock and display drivers Core/GPU: * Fix non-blocking fence wait incorrectly rounding up to 1 jiffy timeout * Only print GMU fw version once, instead of each time the GPU resumes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtt2AODBXdod8ULXcAygf_qYvwRDVeUVtODx=2jErp6cA@mail.gmail.com
2025-02-19drm/bridge: Pass full state to atomic_post_disableMaxime Ripard
It's pretty inconvenient to access the full atomic state from drm_bridges, so let's change the atomic_post_disable hook prototype to pass it directly. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-5-e71598f49c8f@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-19drm/bridge: Pass full state to atomic_disableMaxime Ripard
It's pretty inconvenient to access the full atomic state from drm_bridges, so let's change the atomic_disable hook prototype to pass it directly. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-4-e71598f49c8f@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-19drm/bridge: Pass full state to atomic_enableMaxime Ripard
It's pretty inconvenient to access the full atomic state from drm_bridges, so let's change the atomic_enable hook prototype to pass it directly. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-3-e71598f49c8f@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-15drm/msm/dp: account for widebus and yuv420 during mode validationAbhinav Kumar
Widebus allows the DP controller to operate in 2 pixel per clock mode. The mode validation logic validates the mode->clock against the max DP pixel clock. However the max DP pixel clock limit assumes widebus is already enabled. Adjust the mode validation logic to only compare the adjusted pixel clock which accounts for widebus against the max DP pixel clock. Also fix the mode validation logic for YUV420 modes as in that case as well, only half the pixel clock is needed. Cc: stable@vger.kernel.org Fixes: 757a2f36ab09 ("drm/msm/dp: enable widebus feature for display port") Fixes: 6db6e5606576 ("drm/msm/dp: change clock related programming for YUV420 over DP") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dale Whinham <daleyo@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/635789/ Link: https://lore.kernel.org/r/20250206-dp-widebus-fix-v2-1-cb89a0313286@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-01-13Merge tag 'drm-msm-next-2025-01-07' of gitlab.freedesktop.org:drm/msm into ↵Dave Airlie
drm-next Updates for v6.14 MDSS: - properly described UBWC registers - added SM6150 (aka QCS615) support MDP4: - several small fixes DPU: - added SM6150 (aka QCS615) support - enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane) - fixed modes filtering for platforms w/o 3DMux - fixed DSPP DSPP_2 / _3 links on several platforms - corrected DSPP definitions on SDM670 - added CWB hardware blocks support - added VBIF to DPU snapshots - dropped struct dpu_rm_requirements DP: - reworked DP audio support DSI: - added SM6150 (aka QCS615) support GPU: - Print GMU core fw version - GMU bandwidth voting for a740 and a750 - Expose uche trap base via uapi - UAPI error reporting Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsutUu4ff6OpXNXxqf1xaV0rV6oV23VXNRiF0_OEfe72Q@mail.gmail.com
2024-12-22drm/msm/dp: stop passing panel to msm_dp_audio_get()Dmitry Baryshkov
The dp_audio module doesn't make any use of the passed DP panel instance. Drop the argument. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/629056/ Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-5-f8d1961cf22f@linaro.org
2024-12-22drm/msm/dp: drop struct msm_dp_panel_inDmitry Baryshkov
All other submodules pass arguments directly. Drop struct msm_dp_panel_in that is used to wrap dp_panel's submodule args and pass all data to msm_dp_panel_get() directly. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629055/ Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-4-f8d1961cf22f@linaro.org
2024-12-22drm/msm/dp: drop obsolete audio headers access through catalogDmitry Baryshkov
Drop obsolete functions to access audio packet headers. The dp_audio.c now writes them using msm_dp_write_link() directly. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/629052/ Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-3-f8d1961cf22f@linaro.org
2024-12-22drm/msm/dp: use msm_dp_utils_pack_sdp_header() for audio packetsDmitry Baryshkov
Use msm_dp_utils_pack_sdp_header() and call msm_dp_write_link() directly to program audio packet data. Use 0 as Packet ID, as it was not programmed earlier. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/629051/ Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-2-f8d1961cf22f@linaro.org
2024-12-22drm/msm/dp: drop msm_dp_panel_dump_regs() and msm_dp_catalog_dump_regs()Dmitry Baryshkov
The msm_dp_panel_dump_regs() and msm_dp_catalog_dump_regs() are not called anywhere. If there is a necessity to dump registers, the snapshotting should be used instead. Drop these two functions. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629049/ Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-1-f8d1961cf22f@linaro.org
2024-12-16drm/msm/dp: use eld_mutex to protect access to connector->eldDmitry Baryshkov
Reading access to connector->eld can happen at the same time the drm_edid_to_eld() updates the data. Take the newly added eld_mutex in order to protect connector->eld from concurrent access. Reviewed-by: Maxime Ripard <mripard@kernel.org> Acked-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-7-c9bce1ee8bea@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-12drm/msm/dp: disable the opp table request even for dp_ctrl_off_link()Abhinav Kumar
dp_ctrl_off_link() was created to handle a case where we received a cable connect and then get a cable disconnect without the corresponding dp_display_enable(). For such cases the pixel clock will be off but the link clock will still be on. dp_ctrl_off_link() handles this case by turning off the link clock only. However, the vote removal to the opp table for this case was missed. Remove the opp table vote in dp_ctrl_off_link(). Fixes: 375a126090b9 ("drm/msm/dp: tear down main link at unplug handle immediately") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/627487/ Link: https://lore.kernel.org/r/20241205-dp_mst-v1-2-f8618d42a99a@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-12-12drm/msm/dp: dont call dp_catalog_ctrl_mainlink_ctrl in ↵Abhinav Kumar
dp_ctrl_configure_source_params() Once the link has already been setup there is no need to call dp_catalog_ctrl_mainlink_ctrl() as this does a reset on the mainlink thereby tearing down the link briefly. Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/627479/ Link: https://lore.kernel.org/r/20241205-dp_mst-v1-1-f8618d42a99a@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-12-12drm/msm/dp: do not touch the MMSS_DP_INTF_CONFIG for tpgAbhinav Kumar
MMSS_DP_INTF_CONFIG has already been setup by the main datapath for DP to account for widebus to be used/unused etc. In current implementation, TPG only switches the DP controller to use the main datapath stream OR use the test pattern but expects the rest of the controller to be already setup. Keeping the same behavior intact, drop the clearing of MMSS_DP_INTF_CONFIG from the msm_dp_catalog_panel_tpg_enable() API. Fixes: 757a2f36ab09 ("drm/msm/dp: enable widebus feature for display port") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/626888/ Link: https://lore.kernel.org/r/20241202-tpg-v1-2-0fd6b518b914@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-12-02drm/msm/dp: fix msm_dp_utils_pack_sdp_header interfaceDmitry Baryshkov
The msm_dp_utils_pack_sdp_header() accepts an unlimited-size u32 pointer for the header output, while it expects a two-element array. It performs a sizeof check which is always true on 64-bit platforms (since sizeof(u32*) is 8) and is always false on 32-bit platforms. It returns an error code which nobody actually checks. Fix the function interface to accept u32[2] and return void, skipping all the checks. Fixes: 55fb8ffc1802 ("drm/msm/dp: add VSC SDP support for YUV420 over DP") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/626806/ Link: https://lore.kernel.org/r/20241202-fd-dp-audio-fixup-v2-2-d9187ea96dad@linaro.org [quic_abhinavk@quicinc.com: minor fix in the commit message] Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-12-02drm/msm/dp: set safe_to_exit_level before printing itDmitry Baryshkov
Rather than printing random garbage from stack and pretending that it is the default safe_to_exit_level, set the variable beforehand. Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202411081748.0PPL9MIj-lkp@intel.com/ Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/626804/ Link: https://lore.kernel.org/r/20241202-fd-dp-audio-fixup-v2-1-d9187ea96dad@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-12-01Get rid of 'remove_new' relic from platform driver structLinus Torvalds
The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-10-31drm/msm/dp: tidy up platform data namesDmitry Baryshkov
Follow the established symbol name pattern and rename platform data structures. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/622213/ Link: https://lore.kernel.org/r/20241029-msm-dp-rename-v2-3-13c5c03fad44@linaro.org
2024-10-31drm/msm/dp: rename edp_ bridge functions and structDmitry Baryshkov
Follow the estalished prefix and rename eDP bridge symbols to use msm_edp_ prefix, moving the edp to the end of the symbol name. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/622210/ Link: https://lore.kernel.org/r/20241029-msm-dp-rename-v2-2-13c5c03fad44@linaro.org
2024-10-31drm/msm/dp: prefix all symbols with msm_dp_Dmitry Baryshkov
For historical reasons a lot of symbols in the MSM DisplayPort driver used the generic dp_ prefix. Perform a mass-rename of those symbols to use msm_dp prefix. Basically this is a result of the following script: sed drivers/gpu/drm/msm/dp/* -i -e 's/\<dp_/msm_dp_/g' sed drivers/gpu/drm/msm/dp/* -i -e 's/"msm_dp_/"dp_/g' sed drivers/gpu/drm/msm/dp/* -i -e 's/msm_\(dp_sdp_header\|dp_sdp\)\>/\1/g' Yes, this also results in renaming of several struct fields in addition to renaming the structs and functions, but I think the simple solution is better than the more complex one. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202410250305.UHKDhtxy-lkp@intel.com/ Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/622211/ Link: https://lore.kernel.org/r/20241029-msm-dp-rename-v2-1-13c5c03fad44@linaro.org
2024-10-30Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-nextRob Clark
Merging to pick up commit 785324db2d7a ("drm/msm/dp: migrate the ycbcr_420_allowed to drm_bridge"). Signed-off-by: Rob Clark <robdclark@chromium.org>
2024-10-24drm/msm/dp: migrate the ycbcr_420_allowed to drm_bridgeDmitry Baryshkov
Instead of forcing the ycbcr_420_allowed flag to be set on the created drm_connector, set it on the drm_bridge instance and allow drm_bridge_connecgtor to propagate it to the drm_connector. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-5-d74efac9e4e6@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-10-21drm/msm/dp: Add DisplayPort controller for SA8775PSoutrik Mukhopadhyay
The Qualcomm SA8775P platform comes with 2 DisplayPort controllers for each mdss, having different base offsets than the previous SoCs. The support for all 4 DPTX have been added here, and validation of only MDSS0 DPTX0 and DPTX1 have been conducted. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/620320/ Link: https://lore.kernel.org/r/20241018070706.28980-6-quic_mukhopad@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-09-02drm/msm/dp: enable widebus on all relevant chipsetsAbhinav Kumar
Hardware document indicates that widebus is recommended on DP on all MDSS chipsets starting version 5.x.x and above. Follow the guideline and mark widebus support on all relevant chipsets for DP. Fixes: 766f705204a0 ("drm/msm/dp: Remove now unused connector_type from desc") Fixes: 1b2d98bdd7b7 ("drm/msm/dp: Add DisplayPort controller for SM8650") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 757a2f36ab09 ("drm/msm/dp: enable widebus feature for display port") Fixes: 1b2d98bdd7b7 ("drm/msm/dp: Add DisplayPort controller for SM8650") Patchwork: https://patchwork.freedesktop.org/patch/606556/ Link: https://lore.kernel.org/r/20240730195012.2595980-1-quic_abhinavk@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-08-05drm/msm/dp: reset the link phy params before link trainingAbhinav Kumar
Before re-starting link training reset the link phy params namely the pre-emphasis and voltage swing levels otherwise the next link training begins at the previously cached levels which can result in link training failures. Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/605946/ Link: https://lore.kernel.org/r/20240725220450.131245-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-08-05drm/msm/dp: fix the max supported bpp logicAbhinav Kumar
Fix the dp_panel_get_supported_bpp() API to return the minimum supported bpp correctly for relevant cases and use this API to correct the behavior of DP driver which hard-codes the max supported bpp to 30. This is incorrect because the number of lanes and max data rate supported by the lanes need to be taken into account. Replace the hardcoded limit with the appropriate math which accounts for the accurate number of lanes and max data rate. changes in v2: - Fix the dp_panel_get_supported_bpp() and use it - Drop the max_t usage as dp_panel_get_supported_bpp() already returns the min_bpp correctly now changes in v3: - replace min_t with just min as all params are u32 Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/43 Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/607073/ Link: https://lore.kernel.org/r/20240805202009.1120981-1-quic_abhinavk@quicinc.com Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-06-24drm/msm/dp: switch to struct drm_edidJani Nikula
Prefer the struct drm_edid based functions for reading the EDID and updating the connector. Simplify the flow by updating the EDID property when the EDID is read instead of at .get_modes. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/593976/ Link: https://lore.kernel.org/r/93d6c446ed4831dadfb4a77635a67cf5f27e19ff.1715691257.git.jani.nikula@intel.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-06-05drm/msm/dp: fix runtime_pm handling in dp_wait_hpd_assertedDmitry Baryshkov
The function dp_wait_hpd_asserted() uses pm_runtime_get_sync() and doesn't care about the return value. Potentially this can lead to unclocked access if for some reason resuming of the DP controller fails. Change the function to use pm_runtime_resume_and_get() and return an error if resume fails. Fixes: e2969ee30252 ("drm/msm/dp: move of_dp_aux_populate_bus() to eDP probe()") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/580137/ Link: https://lore.kernel.org/r/20240226223446.4194079-1-dmitry.baryshkov@linaro.org [quic_abhinavk@quicinc.com: resolved trivial conflict while rebase] Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2024-04-22drm/msm/dp: Use function arguments for audio operationsBjorn Andersson
The dp_audio read and write operations uses members in struct dp_catalog for passing arguments and return values. This adds unnecessary complexity to the implementation, as it turns out after detangling the logic that no state is actually held in these variables. Clean this up by using function arguments and return values for passing the data. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/585350/ Link: https://lore.kernel.org/r/20240328-msm-dp-cleanup-v2-6-a5aed9798d32@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-04-22drm/msm/dp: Use function arguments for timing configurationBjorn Andersson
dp_catalog_panel_timing_cfg() takes 4 arguments, which are passed from the calling function through members of struct dp_catalog. No state is maintained other than across this call, so switch to function arguments to clean up the code. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/585351/ Link: https://lore.kernel.org/r/20240328-msm-dp-cleanup-v2-5-a5aed9798d32@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-04-22drm/msm/dp: Use function arguments for aux writesBjorn Andersson
The dp_aux write operations takes the data to be operated on through a member of struct dp_catalog, rather than as an argument to the function. No state is maintained other than across the calling of the functions, so replace this member with a function argument. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/585346/ Link: https://lore.kernel.org/r/20240328-msm-dp-cleanup-v2-4-a5aed9798d32@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-04-22drm/msm/dp: Remove unused defines and membersBjorn Andersson
Throughout the Qualcomm Displayport driver a number of defines and struct members has become unused, but lingers in the code. Remove these. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/585345/ Link: https://lore.kernel.org/r/20240328-msm-dp-cleanup-v2-3-a5aed9798d32@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-04-22drm/msm/dp: Removed fixed nvid "support"Bjorn Andersson
The "desc" member of struct dp_panel is zero-initialized during allocation and never assigned, resulting in dp_ctrl_use_fixed_nvid() never returning true. This returned boolean value is passed around but never acted upon. Perform constant propagation and remove the traces of "fixed nvid". Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/585344/ Link: https://lore.kernel.org/r/20240328-msm-dp-cleanup-v2-2-a5aed9798d32@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-04-22drm/msm/dp: Drop unused dp_debug structBjorn Andersson
The members of struct dp_debug are no longer used, so the only purpose of this struct is as a type of the return value of dp_debug_get(), to signal success/error. Drop the struct in favor of signalling the result of initialization using an int, then merge dp_debug_get() with dp_debug_init() to avoid the unnecessar boilerplate code. Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/585343/ Link: https://lore.kernel.org/r/20240328-msm-dp-cleanup-v2-1-a5aed9798d32@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-04-22drm/msm/dp: Delete the old 500 ms wait for eDP HPD in aux transferDouglas Anderson
Before the introduction of the wait_hpd_asserted() callback in commit 841d742f094e ("drm/dp: Add wait_hpd_asserted() callback to struct drm_dp_aux") the API between panel drivers and DP AUX bus drivers was that it was up to the AUX bus driver to wait for HPD in the transfer() function. Now wait_hpd_asserted() has been added. The two panel drivers that are DP AUX endpoints use it. See commit 2327b13d6c47 ("drm/panel-edp: Take advantage of wait_hpd_asserted() in struct drm_dp_aux") and commit 3b5765df375c ("drm/panel: atna33xc20: Take advantage of wait_hpd_asserted() in struct drm_dp_aux"). We've implemented wait_hpd_asserted() in the MSM DP driver as of commit e2969ee30252 ("drm/msm/dp: move of_dp_aux_populate_bus() to eDP probe()"). There is no longer any reason for long wait in the AUX transfer() function. Remove it. NOTE: the wait_hpd_asserted() is listed as "optional". That means it's optional for the DP AUX bus to implement. In the case of the MSM DP driver we implement it so we can assume it will be called. ALSO NOTE: the wait wasn't actually _hurting_ anything and wasn't even causing long timeouts, but it's still nice to get rid of unneeded code. Specificaly it's not truly needed because to handle other DP drivers that can't power on as quickly (specifically parade-ps8640) we already avoid DP AUX transfers for eDP panels that aren't powered on. See commit 8df1ddb5bf11 ("drm/dp: Don't attempt AUX transfers when eDP panels are not powered"). Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/583130/ Link: https://lore.kernel.org/r/20240315143621.v2.3.I535606f6d4f7e3e5588bb75c55996f61980183cd@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-04-08drm/msm/dp: Account for the timeout in wait_hpd_asserted() callbackDouglas Anderson
The DP wait_hpd_asserted() callback is passed a timeout which indicates how long we should wait for HPD. This timeout was being ignored in the MSM DP implementation and instead a hardcoded 500 ms timeout was used. Fix it to use the proper timeout. As part of this we move the hardcoded 500 ms number into the AUX transfer function, which isn't given a timeout. The wait in the AUX transfer function will be removed in a future commit. Fixes: e2969ee30252 ("drm/msm/dp: move of_dp_aux_populate_bus() to eDP probe()") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/583128/ Link: https://lore.kernel.org/r/20240315143621.v2.2.I7758d18a1773821fa39c034b16a12ef3f18a51ee@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-04-08drm/msm/dp: Avoid a long timeout for AUX transfer if nothing connectedDouglas Anderson
As documented in the description of the transfer() function of "struct drm_dp_aux", the transfer() function can be called at any time regardless of the state of the DP port. Specifically if the kernel has the DP AUX character device enabled and userspace accesses "/dev/drm_dp_auxN" directly then the AUX transfer function will be called regardless of whether a DP device is connected. For eDP panels we have a special rule where we wait (with a 5 second timeout) for HPD to go high. This rule was important before all panels drivers were converted to call wait_hpd_asserted() and actually can be removed in a future commit. For external DP devices we never checked for HPD. That means that trying to access the DP AUX character device (AKA `hexdump -C /dev/drm_dp_auxN`) would very, very slowly timeout. Specifically on my system: $ time hexdump -C /dev/drm_dp_aux0 hexdump: /dev/drm_dp_aux0: Connection timed out real 0m8.200s We want access to the drm_dp_auxN character device to fail faster than 8 seconds when no DP cable is plugged in. Let's add a test to make transfers fail right away if a device isn't plugged in. Rather than testing the HPD line directly, we have the dp_display module tell us when AUX transfers should be enabled so we can handle cases where HPD is signaled out of band like with Type C. Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/583127/ Link: https://lore.kernel.org/r/20240315143621.v2.1.I16aff881c9fe82b5e0fc06ca312da017aa7b5b3e@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
generated by cgit (git 2.34.1) at 2025-07-15 13:57:49 +0000