| Age | Commit message (Collapse) | Author |
|---|
|
Adds basic support for the new display classes available on GB20x GPUs.
Most of the changes here deal with HW method moves, with the only other
change of note being tweaks to skip allocation of CTXDMA objects, which
aren't required on Blackwell display.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This commit adds support for the GB20x GPUs found on GeForce RTX 50xx
series boards.
Beyond a few miscellaneous register moves and HW class ID plumbing,
this reuses most of the code added to support GH100/GB10x.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This commit enables basic support for the GB100/GB102 Blackwell GPUs.
Beyond HW class ID plumbing there's very little change here vs GH100.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
From VOLTA_CHANNEL_GPFIFO_A onwards, HW no longer updates the GET/GP_GET
pointers in USERD following channel progress, but instead updates on a
timer for compatibility, and SW is expected to implement its own method
of tracking channel progress (typically via non-WFI semaphore release).
Nouveau has been making use of the compatibility mode up until now,
however, from BLACKWELL_CHANNEL_GPFIFO_A HW no longer supports USERD
writeback at all.
Allocate a per-channel buffer in system memory, and append a non-WFI
semaphore release to the end of each push buffer segment to simulate
the pointers previously read from USERD.
This change is implemented for Fermi (which is the first to support non-
WFI semaphore release) onwards, as readback from system memory is likely
faster than BAR1 reads.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Primarily a cleanup to allow for changes in newer CHANNEL_GPFIFO classes
to be more easily implemented.
Compared to the prior implementation, this submits userspace push buffer
segments as subroutines and uses the NV_RAMUSERD_TOP_LEVEL_GET registers
to track the main (kernel) push buffer progress.
Fixes a number of sporadic failures seen during piglit runs.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This commit enables basic support for Hopper GPUs, and is intended
primarily as a base supporting Blackwell GPUs, which reuse most of
the code added here.
Advanced features such as Confidential Compute are not supported.
Beyond a few miscellaneous register moves and HW class ID plumbing,
the bulk of the changes implemented here are to support the GSP-RM
boot sequence used on Hopper/Blackwell GPUs, as well as a new page
table layout.
There should be no changes here that impact prior GPUs.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Co-developed-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
GPUs exist now with a 64-bit BAR0, which mean that BAR1 and BAR2's
indices (as passed to pci_resource_len() etc) are bumped up by one.
Modify nvkm_device.resource_addr/size() to take an enum instead of
an integer bar index, and take IORESOURCE_MEM_64 into account when
translating to the "raw" bar id.
[airlied: fixup ERR_PTR]
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
HOPPER_CHANNEL_GPFIFO_A removes the SEMAPHORE[A-D] methods that are
currently used by nouveau to implement fences on GF100 and newer.
Switch to the newer SEM methods available from VOLTA_CHANNEL_GPFIFO,
which are also available on the Hopper/Blackwell host classes.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The current code using NV90F1_CTRL_CMD_VASPACE_COPY_SERVER_RESERVED_PDES
not only requires changes to support the new page table layout used on
Hopper/Blackwell GPUs, but is also broken in that it always mirrors the
PDEs used for virtual address 0, rather than the area reserved for RM.
This works fine for the non-NVK case where the kernel has full control
of the VMM layout and things end up in the right place, but NVK puts
its kernel reserved area much higher in the address space.
Fixing the code to work at any VA is not enough as some parts of RM want
the reserved area in a specific location, and NVK would then hit other
assertions in RM instead.
Fortunately, it appears that RM never needs to allocate anything within
its reserved area for DRM clients, and the COPY_SERVER_RESERVED_PDES
control call primarily serves to allow RM to locate the root page table
when initialising a channel's instance block.
Flag VMMs allocated by the DRM driver as externally owned, and use
NV0080_CTRL_CMD_DMA_SET_PAGE_DIRECTORY to inform RM of the root page
table in a similar way to NVIDIA's UVM driver.
The COPY_SERVER_RESERVED_PDES paths are kept for the golden context
image and gr scrubber channel, where RM needs the reserved area.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
GH100/GBxxx have 6-level page tables.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
570.144 has incompatible changes to NV0000_ALLOC_PARAMETERS.
Factor out the common code so it can be shared.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
555.42.02 has incompatible changes to FBSR.
At the same time, move the calling of FBSR functions from the instmem
subdev's suspend/resume paths, to GSP's. This is needed to fix ordering
issues that arise from changes to FBSR in newer RM versions.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
545.23.06 increases the libos3 heap size requirements, and GH100/GBxxx
will need their own implementation entirely.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
With minimal to no direct HW programming required, most nvkm_engine
implementations are nearly identical when running on top of GSP-RM.
Add a common implementation of the boilerplate, and use nvkm_rm_gpu to
expose the correct class IDs.
As they're now handled by common code, and there's no support for them
prior to GSP-RM support - this deletes the GA100 NVDEC/NVJPG/OFA HALs,
the GA102 NVENC/OFA HALs, and the AD102 GR/NVDEC/NVENC/NVJPG/OFA HALs.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Use display class IDs from nvkm_rm_gpu, instead of copying them from the
non-GSP HALs.
Removes the AD102 display HAL, which is no longer required as there's no
support for it without GSP-RM.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
With GSP-RM handling the majority of the HW programming, NVKM's usual
HALs are more elaborate than necessary, resulting in a fair amount of
duplicated boilerplate.
Adds 'nvkm_rm_gpu' which serves to provide GPU-specific constants and
functions in a more streamlined manner.
This is initially used in subsequent commits to store engine class IDs,
and replace the per-engine/engobj boilerplate with common code for all
GSP-RM supported engines - and is further extended when adding GH100,
GB10x and GB20x support.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Rather than using OpenRM's directory structure for headers, move to a
layout that's split roughly around RM API boundaries.
Also move the headers from include/nvrm to subdev/gsp/rm/r535/nvrm,
with the rest of the r535-specific code.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Split handling of NV01_DEVICE (and other related objects) out into its
own module.
Aside from moving the function pointers, no code change is intended.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Split NV01_ROOT handling out into its own module.
Aside from moving the function pointers, no code change is intended.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Split base RM_ALLOC handling out into its own module.
Aside from moving the function pointers, no code change is intended.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Split base RM_CONTROL handling out into its own module.
Aside from moving the function pointers, no code change is intended.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Later patches in the series add HALs around various RM APIs in order to
support a newer version of GSP-RM firmware. In order to do this, begin
by splitting the code up into "modules" that roughly represent RM's API
boundaries so they can be more easily managed.
Aside from moving the RPC function pointers, no code change is indended.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
560.28.03 supports more NVENC instances.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
570.86.16 supports more NVENC instances.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
560.28.03 supports more copy engine instances.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
In order to specify a channel ID to RM during channel allocation, the
channel ID is broken down into a "userd page" index and an index into
that page.
It was assumed that RM would enforce that the same physical block of
memory be used for all CHIDs within a "userd page", and the GSP paths
override NVKM's normal CHID allocation to handle this.
However, none of that turns out to be necessary.
Remove the GSP-specific code and use the regular CHID allocation path.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Some GSP RPC commands need a new reply policy: "caller don't care about
the message content but want to make sure a reply is received". To
support this case, a new reply policy is introduced.
NV_VGPU_MSG_FUNCTION_ALLOC_MEMORY is a large GSP RPC command. The actual
required policy is NVKM_GSP_RPC_REPLY_POLL. This can be observed from the
dump of the GSP message queue. After the large GSP RPC command is issued,
GSP will write only an empty RPC header in the queue as the reply.
Without this change, the policy "receiving the entire message" is used
for NV_VGPU_MSG_FUNCTION_ALLOC_MEMORY. This causes the timeout of receiving
the returned GSP message in the suspend/resume path.
Introduce the new reply policy NVKM_GSP_RPC_REPLY_POLL, which waits for
the returned GSP message but discards it for the caller. Use the new policy
NVKM_GSP_RPC_REPLY_POLL on the GSP RPC command
NV_VGPU_MSG_FUNCTION_ALLOC_MEMORY.
Fixes: 50f290053d79 ("drm/nouveau: support handling the return of large GSP message")
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227013554.8269-3-zhiw@nvidia.com
|
|
There can be multiple cases of handling the GSP RPC messages, which are
the reply of GSP RPC commands according to the requirement of the
callers and the nature of the GSP RPC commands.
The current supported reply policies are "callers don't care" and "receive
the entire message" according to the requirement of the callers. To
introduce a new policy, factor out the current RPC command reply polices.
Also, centralize the handling of the reply in a single function.
Factor out NVKM_GSP_RPC_REPLY_NOWAIT as "callers don't care" and
NVKM_GSP_RPC_REPLY_RECV as "receive the entire message". Introduce a
kernel doc to document the policies. Factor out
r535_gsp_rpc_handle_reply().
No functional change is intended for small GSP RPC commands. For large GSP
commands, the caller decides the policy of how to handle the returned GSP
RPC message.
Cc: Ben Skeggs <bskeggs@nvidia.com>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227013554.8269-2-zhiw@nvidia.com
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with flexible-array members in the
middle of other structs, we use the `struct_group_tagged()` helper
to separate the flexible arrays from the rest of the members in the
flexible structures. We then use the newly created tagged `struct
nvif_ioctl_v0_hdr` and `struct nvif_ioctl_mthd_v0_hdr` to replace the
type of the objects causing trouble in multiple structures.
We also want to ensure that when new members need to be added to the
flexible structures, they are always included within the newly created
tagged structs. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
So, with these changes, fix the following warnings:
drivers/gpu/drm/nouveau/nvif/object.c:60:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/gpu/drm/nouveau/nvif/object.c:233:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/gpu/drm/nouveau/nvif/object.c:214:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/gpu/drm/nouveau/nvif/object.c:152:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/gpu/drm/nouveau/nvif/object.c:138:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/gpu/drm/nouveau/nvif/object.c:104:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/gpu/drm/nouveau/nouveau_svm.c:83:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/gpu/drm/nouveau/nouveau_svm.c:82:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/Z6xjZhHxRp4Bu_SX@kspp
|
|
The user of *rm_alloc_push() always pass 0 in repc.
Remove unused param repc since no user actually uses it.
No functional change is intended.
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124182958.2040494-5-zhiw@nvidia.com
|
|
Nouveau driver is the only user of the drm_encoder_slave API. Rework
necessary bits of drm_encoder_slave into the nouveau_i2c_encoder API and
drop drm_encoder_slave.c from the DRM KMS helper.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250106-nouveau-encoder-slave-v3-2-1d37d2f2c67f@linaro.org
|
|
Chrontel CH7006 and Silicon Image sil164 drivers use drm_encoder_slave
interface which is being used only by the nouveau driver. It doesn't
make sense to keep this interface inside the DRM subsystem. In
preparation to moving this set of helpers to the nouveau driver, move
the only two I2C driver that use that interface to the nouveau driver
too.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250106-nouveau-encoder-slave-v3-1-1d37d2f2c67f@linaro.org
|
|
The LOGINIT, LOGINTR, LOGRM, and LOGPMU buffers are circular buffers
that have printf-like logs from GSP-RM and PMU encoded in them.
LOGINIT, LOGINTR, and LOGRM are allocated by Nouveau and their DMA
addresses are passed to GSP-RM during initialization. The buffers are
required for GSP-RM to initialize properly.
LOGPMU is also allocated by Nouveau, but its contents are updated
when Nouveau receives an NV_VGPU_MSG_EVENT_UCODE_LIBOS_PRINT RPC from
GSP-RM. Nouveau then copies the RPC to the buffer.
The messages are encoded as an array of variable-length structures that
contain the parameters to an NV_PRINTF call. The format string and
parameter count are stored in a special ELF image that contains only
logging strings. This image is not currently shipped with the Nvidia
driver.
There are two methods to extract the logs.
OpenRM tries to load the logging ELF, and if present, parses the log
buffers in real time and outputs the strings to the kernel console.
Alternatively, and this is the method used by this patch, the buffers
can be exposed to user space, and a user-space tool (along with the
logging ELF image) can parse the buffer and dump the logs.
This method has the advantage that it allows the buffers to be parsed
even when the logging ELF file is not available to the user. However,
it has the disadvantage the debugfs entries need to remain until the
driver is unloaded.
The buffers are exposed via debugfs. If GSP-RM fails to initialize, then
Nouveau immediately shuts down the GSP interface. This would normally
also deallocate the logging buffers, thereby preventing the user from
capturing the debug logs.
To avoid this, introduce the keep-gsp-logging command line parameter. If
specified, and if at least one logging buffer has content, then Nouveau
will migrate these buffers into new debugfs entries that are retained
until the driver unloads.
An end-user can capture the logs using the following commands:
cp /sys/kernel/debug/nouveau/<path>/loginit loginit
cp /sys/kernel/debug/nouveau/<path>/logrm logrm
cp /sys/kernel/debug/nouveau/<path>/logintr logintr
cp /sys/kernel/debug/nouveau/<path>/logpmu logpmu
where (for a PCI device) <path> is the PCI ID of the GPU (e.g.
0000:65:00.0).
Since LOGPMU is not needed for normal GSP-RM operation, it is only
created if debugfs is available. Otherwise, the
NV_VGPU_MSG_EVENT_UCODE_LIBOS_PRINT RPCs are ignored.
A simple way to test the buffer migration feature is to have
nvkm_gsp_init() return an error code.
Tested-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030202952.694055-2-ttabi@nvidia.com
|
|
Store the struct device pointer used to allocate the DMA buffer in
the nvkm_gsp_mem object. This allows nvkm_gsp_mem_dtor() to release
the buffer without needing the nvkm_gsp. This is needed so that
we can retain DMA buffers even after the nvkm_gsp object is deleted.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030202952.694055-1-ttabi@nvidia.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
fbdev-dma:
- Only clean up deferred I/O if instanciated
nouveau:
- dmem: Fix privileged error in copy engine channel; Fix possible
data leak in migrate_to_ram()
- gsp: Fix coding style
sched:
- Avoid leaking lockdep map
v3d:
- Stop active perfmon before destroying it
vc4:
- Stop active perfmon before destroying it
xe:
- Drop GuC submit_wq pool
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241010133708.GA461532@localhost.localdomain
|
|
The mutex field has two following semicolons, replace this with just
one semicolon.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240917120856.1877733-1-colin.i.king@gmail.com
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
These are some dodgy "convenience" macros for the DRM driver to peek
into NVKM state. They're still used in a few places, but don't belong
in nvif/device.h in any case.
Move them to nouveau_drv.h, and modify callers to pass a nouveau_drm
instead of an nvif_device.
v2:
- use drm->nvkm pointer for nvxx_*() macros, removing some void*
v3:
- add some explanation of the nvxx_*() macros
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-28-bskeggs@nvidia.com
|
|
There's no good reason the ioremap() that results from nvif_object_map()
should fail, so add a check that the map succeeded, and remove the rd/wr
methods from display channel objects.
As this was the last user of rd/wr methods, the nvif plumbing is removed
at the same time.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-27-bskeggs@nvidia.com
|
|
The previous commit ensures the device is always mapped, so these
are unneeded.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-26-bskeggs@nvidia.com
|
|
The next commit removes the nvif rd/wr methods from nvif_device, which
were probably a bad idea, and mostly intended as a fallback if ioremap()
failed (or wasn't available, as was the case in some tools I once used).
The nv04 KMS driver already mapped the device, because it's mostly been
kept alive on life-support for many years and still directly bashes PRI
a lot for modesetting.
Post-nv50, I tried pretty hard to keep PRI accesses out of the DRM code,
but there's still a few random places where we do, and those were using
the rd/wr paths prior to this commit.
This allocates and maps a new nvif_device (which will replace the usage
of nouveau_drm.master.device later on), and replicates this pointer to
all other possible users.
This will be cleaned up by the end of another patch series, after it's
been made safe to do so.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-25-bskeggs@nvidia.com
|
|
These were once used by used by userspace tools (with nvkm built as a
library), to access multiple GPUs from a single nvif_client.
The DRM code just uses the driver's default device, so remove the
arguments.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-24-bskeggs@nvidia.com
|
|
This was once used by userspace tools (with nvkm built as a library),
but is now unused.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-22-bskeggs@nvidia.com
|
|
This is not, and has never, been used for anything. Remove it.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-21-bskeggs@nvidia.com
|
|
This was once used by userspace tools (with nvkm built as a library), as
a way to select a "default device".
The DRM code doesn't need this at all as clients only have access to a
single device already, so inherit the value from its parent.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-20-bskeggs@nvidia.com
|
|
These are remnants of code long gone. Remove them.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-19-bskeggs@nvidia.com
|
|
Make use of nouveau_cli.name instead of nvkm_client.name.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-18-bskeggs@nvidia.com
|
|
This hasn't been used in a while.
Moves io accessors from nvkm/core/os.h to nvif/os.h at the same time to
fix a compile issue that results from <nvkm/core/object.h> no longer
being included.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-17-bskeggs@nvidia.com
|
|
These were a cludge used to prevent userspace's nvif ioctl from
accessing objects created by the kernel for the same client.
That interface was removed in a previous patch, so these are no
longer useful for anything.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-16-bskeggs@nvidia.com
|
|
The tools that used libnvkm no longer exist.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-15-bskeggs@nvidia.com
|
