Age | Commit message (Collapse) | Author |
|
nvkm_device_tegra_resource_addr()
The nvkm_device_tegra_resource() function returns a mix of error pointers
and NULL. The callers only expect it to return NULL on error. Change it
to only return NULL.
Fixes: 76b8f81a5b92 ("drm/nouveau: improve handling of 64-bit BARs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/dri-devel/334404bdf60765cb5a8e855a74c688bc537531ee.camel@nvidia.com/T/#t
|
|
This commit adds support for the GB20x GPUs found on GeForce RTX 50xx
series boards.
Beyond a few miscellaneous register moves and HW class ID plumbing,
this reuses most of the code added to support GH100/GB10x.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This commit enables basic support for the GB100/GB102 Blackwell GPUs.
Beyond HW class ID plumbing there's very little change here vs GH100.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This commit enables basic support for Hopper GPUs, and is intended
primarily as a base supporting Blackwell GPUs, which reuse most of
the code added here.
Advanced features such as Confidential Compute are not supported.
Beyond a few miscellaneous register moves and HW class ID plumbing,
the bulk of the changes implemented here are to support the GSP-RM
boot sequence used on Hopper/Blackwell GPUs, as well as a new page
table layout.
There should be no changes here that impact prior GPUs.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Co-developed-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
GPUs exist now with a 64-bit BAR0, which mean that BAR1 and BAR2's
indices (as passed to pci_resource_len() etc) are bumped up by one.
Modify nvkm_device.resource_addr/size() to take an enum instead of
an integer bar index, and take IORESOURCE_MEM_64 into account when
translating to the "raw" bar id.
[airlied: fixup ERR_PTR]
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
With minimal to no direct HW programming required, most nvkm_engine
implementations are nearly identical when running on top of GSP-RM.
Add a common implementation of the boilerplate, and use nvkm_rm_gpu to
expose the correct class IDs.
As they're now handled by common code, and there's no support for them
prior to GSP-RM support - this deletes the GA100 NVDEC/NVJPG/OFA HALs,
the GA102 NVENC/OFA HALs, and the AD102 GR/NVDEC/NVENC/NVJPG/OFA HALs.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Use display class IDs from nvkm_rm_gpu, instead of copying them from the
non-GSP HALs.
Removes the AD102 display HAL, which is no longer required as there's no
support for it without GSP-RM.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
In nvkm_device_tegra_probe_iommu(), a paging domain is allocated for @dev
and attached to it on success. Use iommu_paging_domain_alloc() to make it
explicit.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902014700.66095-2-baolu.lu@linux.intel.com
|
|
The previous commit ensures the device is always mapped, so these
are unneeded.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-26-bskeggs@nvidia.com
|
|
These were once used by used by userspace tools (with nvkm built as a
library), to access multiple GPUs from a single nvif_client.
The DRM code just uses the driver's default device, so remove the
arguments.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-24-bskeggs@nvidia.com
|
|
This was once used by userspace tools (with nvkm built as a library),
but is now unused.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-22-bskeggs@nvidia.com
|
|
This has never really been used for anything, in part due to never
having reclocking stable enough in general to attempt to implement
dynamic clock changes based on load, etc.
To avoid having to rework its interfaces, remove it entirely.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-13-bskeggs@nvidia.com
|
|
All callers now pass "detect=true, mmio=true, subdev_mask=~0ULL",
so remove the function arguments, and associated code.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-12-bskeggs@nvidia.com
|
|
Adds support for allocating OFA classes from RM.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-45-skeggsb@gmail.com
|
|
Adds support for allocating NVJPG classes from RM.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-44-skeggsb@gmail.com
|
|
Adds support for allocating VIDEO_ENCODER classes from RM.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-43-skeggsb@gmail.com
|
|
Adds support for allocating VIDEO_DECODER classes from RM.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-42-skeggsb@gmail.com
|
|
Adds support for allocating GR classes from RM.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-41-skeggsb@gmail.com
|
|
Adds support for allocating DMA_COPY classes from RM.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-40-skeggsb@gmail.com
|
|
- Adds support for allocating CHANNEL_GPFIFO classes from RM.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-39-skeggsb@gmail.com
|
|
Adds support for modesetting on RM.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-38-skeggsb@gmail.com
|
|
- Valid VRAM regions are read from GSP-RM, and used to construct our MM
- BAR1/BAR2 VMMs modified to be shared with RM
- Client VMMs have RM VASPACE objects created for them
- Adds FBSR to backup system objects in VRAM across suspend
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-37-skeggsb@gmail.com
|
|
Fetches the interrupt table from RM, and hooks up the GSP interrupt
handler to message queue processing to catch async messages.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-36-skeggsb@gmail.com
|
|
This commit adds the initial code needed to boot the GSP-RM firmware
provided by NVIDIA, bringing with it the beginnings of Ada support.
Until it's had more testing and time to bake, support is disabled by
default (except on Ada). GSP-RM usage can be enabled by passing the
"config=NvGspRm=1" module option.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-33-skeggsb@gmail.com
|
|
- (temporarily) disable if GSP-RM detected, will be added later
- provide empty class list for non-GSP paths
- split tu102 from gm107, it will provide host classes later
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-29-skeggsb@gmail.com
|
|
- (temporarily) disable if GSP-RM detected, will be added later
- provide empty class list for non-GSP paths
- split tu102- from gm107, they will provide host classes later
- fixup HW engine instance masks
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-28-skeggsb@gmail.com
|
|
- move TOP after GSP, so we can disable TOP if GSP is in use
- provide plumbing to support falcon-only and GSP-RM paths
- provide a method for subdevs to detect GSP-RM paths
- split tu102/tu116/ga100 paths from gv100, which can't support GSP-RM
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-5-skeggsb@gmail.com
|
|
Turing apparently needs to use the same register we use on Ampere.
Not executing the scrubber ucode when required would result in large
areas of VRAM being inaccessible to the driver.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130223715.1831509-2-bskeggs@redhat.com
|
|
v2:
- whitespace
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
|
|
v2. fixup for ga103 early merge
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
v2. fixup for ga103 early merge
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
|
|
v2. fixup for ga103 early merge
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
|
|
Adds context binding and support for FWs with a bootloader to the code
that was added to load VPR scrubber HS binaries, and ports ACR over to
using all of it.
- gv100 split from gp108 to handle FW exit status differences
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Under memory load, instmem allocations could end up in the regions of
VRAM that are inaccessible right after boot, and be corrupted after a
suspend/resume cycle as a result of being restored before booting the
mem unlock firmware.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
- replaces the hacked-up version that existed solely to support TTM
v2. remove earlier hack preventing use of non-stall intr for fences
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
- replaces the hacked-up version that existed solely to support TTM
- noop until the next commit, adding proper support for ampere host
v2. fixup for ga103 early merge
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Creates an nvkm_runl for each runlist on the GPU, and an nvkm_engn for
each engine that is reachable from a runlist.
- basically what gk104- already does, but extended to all chips
- adds per-runlist CHID allocators (Ampere)
- splits g98/gt2xx out from g84 (different target engines)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
- reads channel count from GPU from gm200 onwards
- removes gm20b/gp10b (they become identical to gm200/gp100)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
- new-style handlers can now be used here too
- decent clean-up
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
TU102 implementation should be OK for Ampere now.
v2. fixup for ga103 early merge
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
- uses proper class IDs for Turing/Ampere
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Initially for NV_USERMODE class, and Turing/Ampere's new interrupt tree.
v2. fixup for ga103 early merge
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Unifies the handling between PCI-based and Tegra GPUs, and makes more
explicit/obvious where device interrupts can be expected.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
We're going to want this information available earlier than it is now.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One patch for imx/dcss to get rid of a warning message, one off-by-one
fix and GA103 support for nouveau, a refcounting fix for meson, a NULL
pointer dereference fix for ttm, a error check fix for lvds-codec, a
dt-binding schema fix and an underflow fix for sun4i
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816094401.wtadc7ddr6lzq6aj@houat
|
|
Appears to be ok with general GA10x code.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Cc: <stable@vger.kernel.org> # v5.15+
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220803142745.2679510-1-kherbst@redhat.com
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Doesn't fix any known issue, but noticed fifo being initialised in
logs in response to mmu allocation.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.20:
UAPI Changes:
* connector: export bpc limits in debugfs
* dma-buf: Print buffer name in debugfs
Cross-subsystem Changes:
* dma-buf: Improve dma-fence handling; Cleanups
* fbdev: Device-unregistering fixes
Core Changes:
* client: Only use driver-validated modes to avoid blank screen
* dp-aux: Make probing more reliable; Small fixes
* edit: CEA data-block iterators; Introduce struct drm_edid; Many cleanups
* gem: Don't use framebuffer format's non-exising color planes
* probe-helper: Use 640x480 as DisplayPort fallback; Refactoring
* scheduler: Don't kill jobs in interrupt context
Driver Changes:
* amdgpu: Use atomic fence helpers in DM; Fix VRAM address calculation;
Export CRTC bpc settings via debugfs
* bridge: Add TI-DLPC3433; anx7625: Fixes; fy07024di26a30d: Optional
GPIO reset; icn6211: Cleanups; ldb: Add reg and reg-name properties
to bindings, Kconfig fixes; lt9611: Fix display sensing; lt9611uxc:
Fixes; nwl-dsi: Fixes; ps8640: Cleanups; st7735r: Fixes; tc358767:
DSI/DPI refactoring and DSI-to-eDP support, Fixes; ti-sn65dsi83:
Fixes;
* gma500: Cleanup connector I2C handling
* hyperv: Unify VRAM allocation of Gen1 and Gen2
* i915: export CRTC bpc settings via debugfs
* meson: Support YUV422 output; Refcount fixes
* mgag200: Support damage clipping; Support gamma handling; Protect
concurrent HW access; Fixes to connector; Store model-specific limits
in device-info structure; Cleanups
* nouveau: Fixes and Cleanups
* panel: Kconfig fixes
* panfrost: Valhall support
* r128: Fix bit-shift overflow
* rockchip: Locking fixes in error path; Minor cleanups
* ssd130x: Fix built-in linkage
* ttm: Cleanups
* udl; Always advertize VGA connector
* fbdev/vesa: Support COMPILE_TEST
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YqBtumw05JZDEZE2@linux-uq9g
|
|
Pull drm updates from Dave Airlie:
"Intel have enabled DG2 on certain SKUs for laptops, AMD has started
some new GPU support, msm has user allocated VA controls
dma-buf:
- add dma_resv_replace_fences
- add dma_resv_get_singleton
- make dma_excl_fence private
core:
- EDID parser refactorings
- switch drivers to drm_mode_copy/duplicate
- DRM managed mutex initialization
display-helper:
- put HDMI, SCDC, HDCP, DSC and DP into new module
gem:
- rework fence handling
ttm:
- rework bulk move handling
- add common debugfs for resource managers
- convert to kvcalloc
format helpers:
- support monochrome formats
- RGB888, RGB565 to XRGB8888 conversions
fbdev:
- cfb/sys_imageblit fixes
- pagelist corruption fix
- create offb platform device
- deferred io improvements
sysfb:
- Kconfig rework
- support for VESA mode selection
bridge:
- conversions to devm_drm_of_get_bridge
- conversions to panel_bridge
- analogix_dp - autosuspend support
- it66121 - audio support
- tc358767 - DSI to DPI support
- icn6211 - PLL/I2C fixes, DT property
- adv7611 - enable DRM_BRIDGE_OP_HPD
- anx7625 - fill ELD if no monitor
- dw_hdmi - add audio support
- lontium LT9211 support, i.MXMP LDB
- it6505: Kconfig fix, DPCD set power fix
- adv7511 - CEC support for ADV7535
panel:
- ltk035c5444t, B133UAN01, NV3052C panel support
- DataImage FG040346DSSWBG04 support
- st7735r - DT bindings fix
- ssd130x - fixes
i915:
- DG2 laptop PCI-IDs ("motherboard down")
- Initial RPL-P PCI IDs
- compute engine ABI
- DG2 Tile4 support
- DG2 CCS clear color compression support
- DG2 render/media compression formats support
- ATS-M platform info
- RPL-S PCI IDs added
- Bump ADL-P DMC version to v2.16
- Support static DRRS
- Support multiple eDP/LVDS native mode refresh rates
- DP HDR support for HSW+
- Lots of display refactoring + fixes
- GuC hwconfig support and query
- sysfs support for multi-tile
- fdinfo per-client gpu utilisation
- add geometry subslices query
- fix prime mmap with LMEM
- fix vm open count and remove vma refcounts
- contiguous allocation fixes
- steered register write support
- small PCI BAR enablement
- GuC error capture support
- sunset igpu legacy mmap support for newer devices
- GuC version 70.1.1 support
amdgpu:
- Initial SoC21 support
- SMU 13.x enablement
- SMU 13.0.4 support
- ttm_eu cleanups
- USB-C, GPUVM updates
- TMZ fixes for RV
- RAS support for VCN
- PM sysfs code cleanup
- DC FP rework
- extend CG/PG flags to 64-bit
- SI dpm lockdep fix
- runtime PM fixes
amdkfd:
- RAS/SVM fixes
- TLB flush fixes
- CRIU GWS support
- ignore bogus MEC signals more efficiently
msm:
- Fourcc modifier for tiled but not compressed layouts
- Support for userspace allocated IOVA (GPU virtual address)
- DPU: DSC (Display Stream Compression) support
- DP: eDP support
- DP: conversion to use drm_bridge and drm_bridge_connector
- Merge DPU1 and MDP5 MDSS driver
- DPU: writeback support
nouveau:
- make some structures static
- make some variables static
- switch to drm_gem_plane_helper_prepare_fb
radeon:
- misc fixes/cleanups
mxsfb:
- rework crtc mode setting
- LCDIF CRC support
etnaviv:
- fencing improvements
- fix address space collisions
- cleanup MMU reference handling
gma500:
- GEM/GTT improvements
- connector handling fixes
komeda:
- switch to plane reset helper
mediatek:
- MIPI DSI improvements
omapdrm:
- GEM improvements
qxl:
- aarch64 support
vc4:
- add a CL submission tracepoint
- HDMI YUV support
- HDMI/clock improvements
- drop is_hdmi caching
virtio:
- remove restriction of non-zero blob types
vmwgfx:
- support for cursormob and cursorbypass 4
- fence improvements
tidss:
- reset DISPC on startup
solomon:
- SPI support
- DT improvements
sun4i:
- allwinner D1 support
- drop is_hdmi caching
imx:
- use swap() instead of open-coding
- use devm_platform_ioremap_resource
- remove redunant initializations
ast:
- Displayport support
rockchip:
- Refactor IOMMU initialisation
- make some structures static
- replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi
- support swapped YUV formats,
- clock improvements
- rk3568 support
- VOP2 support
mediatek:
- MT8186 support
tegra:
- debugabillity improvements"
* tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits)
drm/i915/dsi: fix VBT send packet port selection for ICL+
drm/i915/uc: Fix undefined behavior due to shift overflowing the constant
drm/i915/reg: fix undefined behavior due to shift overflowing the constant
drm/i915/gt: Fix use of static in macro mismatch
drm/i915/audio: fix audio code enable/disable pipe logging
drm/i915: Fix CFI violation with show_dynamic_id()
drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c
drm/i915/gt: Fix build error without CONFIG_PM
drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path
drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations
drm/msm: don't free the IRQ if it was not requested
drm/msm/dpu: limit writeback modes according to max_linewidth
drm/amd: Don't reset dGPUs if the system is going to s2idle
drm/amdgpu: Unmap legacy queue when MES is enabled
drm: msm: fix possible memory leak in mdp5_crtc_cursor_set()
drm/msm: Fix fb plane offset calculation
drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init
drm/msm/dsi: don't powerup at modeset time for parade-ps8640
drm/rockchip: Change register space names in vop2
dt-bindings: display: rockchip: make reg-names mandatory for VOP2
...
|