| Age | Commit message (Collapse) | Author |
|---|
|
The Unicam hardware has been observed to cause a buffer overrun when
using the dummy buffer as a circular buffer. The conditions that cause
the overrun are not fully known, but it seems to occur when the memory
bus is heavily loaded.
To avoid the overrun, program the hardware with a buffer size of 0 when
using the dummy buffer. This will cause overrun into the allocated dummy
buffer, but avoid out of bounds writes.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The imx219/imx708 sensors frequently generate a single corrupt frame
(image or embedded data) when the sensor first starts. This can either
be a missing line, or invalid samples within the line. This only occurrs
using the upstream Unicam kernel driver.
Disabling trigger mode elimiates this corruption. Since trigger mode is
a legacy feature copied from the firmware driver and not expected to be
needed, remove it. Tested on the Raspberry Pi cameras and shows no ill
effects.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When matching formats via try_fmt/set_fmt ioctls, test for the unpacked
formats as well as packed formats. This allows userland clients setup
unpacking to 16-bits from the 10/12/14-packed CSI2 formats.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Ensure that the frame sequence counter is incremented only if a previous
frame start interrupt has occurred, or a frame start + frame end has
occurred simultaneously.
This corresponds the sequence number with the actual number of frames
produced by the sensor, not the number of frame buffers dequeued back
to userland.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Since commit 88785982a19d ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Since the vb2_ops_wait_prepare/finish callbacks already rely on that field,
we can safely drop these callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for meson-ge2d
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/media to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The bcm2835-unicam driver calls the clk_set_min_rate() function, which
is declared but not implemented on platforms that don't provide
COMMON_CLK. This causes linkage failures with some configurations.
Fix it by depending on COMMON_CLK. This only slightly restricts
compilation testing, but not usage of the driver as all platforms on
which the hardware can be found provide COMMON_CLK.
Fixes: 392cd78d495f ("media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405112243.2MLRT7li-lkp@intel.com/
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The media_pad_remote_pad_unique() function returns error pointers, not
NULL. Update the check accordingly.
Fixes: 392cd78d495f ("media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/fbbe7862-2820-44eb-81cb-7f33b99cca35@moroto.mountain
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
platform_get_irq() already prints an error for us.
Fix this cocci warning:
drivers/media/platform/broadcom/bcm2835-unicam.c:2664:2-9: line 2664 is redundant because platform_get_irq() already prints an error
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20240506-fix-broad-v2-2-e6a2a5c0d609@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
platform_get_irq() cannot return the value 0. It will either return a non-zero
irq or a errcode.
If a errcode is returned, we need to populate the error code upwards. It will
give a more accurate reason of why it failed to the caller, who might decide
to retry later.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240506-fix-broad-v2-1-e6a2a5c0d609@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240506100917.1544174-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The unicam driver uses the v4l2_subdev structure. Include the
corresponding header instead of relying on indirect includes.
Closes: https://lore.kernel.org/oe-kbuild-all/202404302324.8aTC84kE-lkp@intel.com/
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The driver can only match the device vide the DT table, so the table
should always be used, of_match_ptr does not make sense here.
It fixes this warning:
drivers/media/platform/broadcom/bcm2835-unicam.c:2724:34: warning: ‘unicam_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a driver for the Unicam camera receiver block on BCM283x processors.
It is represented as two video device nodes: unicam-image and
unicam-embedded which are connected to an internal subdev (named
unicam-subdev) in order to manage streams routing.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Co-developed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Co-developed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Squash fixes by Laurent.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
