summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath11k
AgeCommit message (Collapse)Author
2024-05-25wifi: ath11k: restore country code during resumeBaochen Qiang
We got report that regdomain is not correct after return from hibernation: Before hibernation: % iw reg get [...] phy#0 (self-managed) country CH: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A), NO-OUTDOOR, AUTO-BW (5250 - 5330 @ 80), (N/A, 23), (0 ms), NO-OUTDOOR, DFS, AUTO-BW (5490 - 5590 @ 80), (N/A, 30), (0 ms), DFS, AUTO-BW (5590 - 5650 @ 40), (N/A, 30), (600000 ms), DFS, AUTO-BW (5650 - 5730 @ 80), (N/A, 30), (0 ms), DFS, AUTO-BW (5735 - 5875 @ 80), (N/A, 14), (N/A), AUTO-BW After hibernation: % iw reg get [...] phy#0 (self-managed) country na: DFS-UNSET (2402 - 2472 @ 40), (N/A, 20), (N/A) (2457 - 2482 @ 20), (N/A, 20), (N/A), PASSIVE-SCAN (5170 - 5330 @ 160), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN (5490 - 5730 @ 160), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN (5735 - 5895 @ 160), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN (5945 - 7125 @ 160), (N/A, 30), (N/A), AUTO-BW, PASSIVE-SCAN The reason is, during resume, firmware is reinitialized but host does not send current country code to firmware. So default reg rules with country code set to 'na' is uploaded to host, as shown above. Fix it by restoring country code to firmware during resume. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: 166a490f59ac ("wifi: ath11k: support hibernation") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240520024148.5472-3-quic_bqiang@quicinc.com
2024-05-25wifi: ath11k: refactor setting country code logicBaochen Qiang
ath11k_wmi_send_set_current_country_cmd() is called in several places and all of them are just simply repeating the same logic. Refactor to make code clean. Compile tested only. Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240520024148.5472-2-quic_bqiang@quicinc.com
2024-05-23wifi: ath11k: move power type check to ASSOC stage when connecting to 6 GHz APBaochen Qiang
With commit bc8a0fac8677 ("wifi: mac80211: don't set bss_conf in parsing") ath11k fails to connect to 6 GHz AP. This is because currently ath11k checks AP's power type in ath11k_mac_op_assign_vif_chanctx() which would be called in AUTH stage. However with above commit power type is not available until ASSOC stage. As a result power type check fails and therefore connection fails. Fix this by moving power type check to ASSOC stage, also move regulatory rules update there because it depends on power type. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: bc8a0fac8677 ("wifi: mac80211: don't set bss_conf in parsing") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240424064019.4847-1-quic_bqiang@quicinc.com
2024-05-23wifi: ath11k: fix WCN6750 firmware crash caused by 17 num_vdevsCarl Huang
WCN6750 firmware crashes because of num_vdevs changed from 4 to 17 in ath11k_init_wmi_config_qca6390() as the ab->hw_params.num_vdevs is 17. This is caused by commit f019f4dff2e4 ("wifi: ath11k: support 2 station interfaces") which assigns ab->hw_params.num_vdevs directly to config->num_vdevs in ath11k_init_wmi_config_qca6390(), therefore WCN6750 firmware crashes as it can't support such a big num_vdevs. Fix it by assign 3 to num_vdevs in hw_params for WCN6750 as 3 is sufficient too. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01371-QCAMSLSWPLZ-1 Fixes: f019f4dff2e4 ("wifi: ath11k: support 2 station interfaces") Reported-by: Luca Weiss <luca.weiss@fairphone.com> Tested-by: Luca Weiss <luca.weiss@fairphone.com> Closes: https://lore.kernel.org/r/D15TIIDIIESY.D1EKKJLZINMA@fairphone.com/ Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240520030757.2209395-1-quic_cjhuang@quicinc.com
2024-05-23wifi: mac80211: pass parsed TPE data to driversJohannes Berg
Instead of passing the full TPE elements, in all their glory and mixed up data formats for HE backward compatibility, parse them fully into the right values, and pass that to the drivers. Also introduce proper validation already in mac80211, so that drivers don't need to do it, and parse the EHT portions. The code now passes the values in the right order according to the channel used by an interface, which could also be a subset of the data advertised by the AP, if we couldn't connect with the full bandwidth (for whatever reason.) Also add kunit tests for the more complicated bits of it. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240506214536.2aa839969b60.I265b28209e0b29772b2f125f7f83de44a4da877b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: ath11k: fix TPE power levelsJohannes Berg
The chanctx can be shared, but it seems like the TPE values for this vif should only reflect the channel that the vif uses, which is captured in bss_conf->chanreq.oper rather than the chanctx. Use that when calculating defaults, a similar issue is where the data from the AP is processed, but I'm moving that to mac80211. Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240506214536.d99fcf5856b9.I359bb401ea74bf82dc981a86a7ca3fa44d169d2e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: ieee80211/ath11k: remove IEEE80211_MAX_NUM_PWR_LEVELJohannes Berg
The define IEEE80211_MAX_NUM_PWR_LEVEL doesn't make much sense. Yes, that table has a maximum value of 8, and the table will actually remain that way, but EHT introduced a way to encode more levels for 320 MHz channels. Remove IEEE80211_MAX_NUM_PWR_LEVEL and, for ath11k being the only user, add ATH11K_NUM_PWR_LEVELS, where it makes sense since it cannot support 320 MHz channels. Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240506214536.9818e5471055.Icece7e47e963d6b68e0d97ba13c102b37fbaa689@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-22tracing/treewide: Remove second parameter of __assign_str()Steven Rostedt (Google)
With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs Tested-by: Guenter Roeck <linux@roeck-us.net>
2024-05-17wifi: ath11k: Fix error path in ath11k_pcic_ext_irq_configBreno Leitao
If one of the dummy allocation fails in ath11k_pcic_ext_irq_config(), the previous allocated devices might leak due to returning without deallocating the devices. Instead of returning on the error path, deallocate all the previously allocated net_devices and then return. Fixes: bca592ead825 ("wifi: ath11k: allocate dummy net_device dynamically") Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508185902.70975-1-leitao@debian.org
2024-05-13wifi: ath11k: fix misspelling of "dma" in num_rxmda_per_pdevJeff Johnson
The ath11k_hw_params member num_rxmda_per_pdev contains a misspelling of "dma" so fix it. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240504-ath11k-num_rxmda_per_pdev-v1-1-7f97bced8495@quicinc.com
2024-05-13wifi: ath11k: initialize 'ret' in ath11k_qmi_load_file_target_mem()Jeff Johnson
smatch flagged the following issue: drivers/net/wireless/ath/ath11k/qmi.c:2401 ath11k_qmi_load_file_target_mem() error: uninitialized symbol 'ret'. The reality is that 'ret' is initialized in every path through ath11k_qmi_load_file_target_mem() except one, the case where the input 'len' is 0, and hence the "while (remaining)" loop is never entered. But to make sure this case is also handled, add an initializer to the declaration of 'ret'. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240504-qmi_load_file_target_mem-v1-2-069fc44c45eb@quicinc.com
2024-05-07wifi: ath11k: skip status ring entry processingVenkateswara Naralasetty
If STATUS_BUFFER_DONE is not set for a monitor status ring entry, we don't process the status ring until STATUS_BUFFER_DONE set for that status ring entry. During LMAC reset it may happen that hardware will not write STATUS_BUFFER_DONE tlv in status buffer, in that case we end up waiting for STATUS_BUFFER_DONE leading to backpressure on monitor status ring. To fix the issue, when HP (Head Pointer) + 1 entry is peeked and if DMA is not done and if HP + 2 entry's DMA done is set, replenish HP + 1 entry and start processing in next interrupt. If HP + 2 entry's DMA done is not set, poll onto HP + 1 entry DMA done to be set. Also, during monitor attach HP points to the end of the ring and TP (Tail Pointer) points to the start of the ring. Using ath11k_hal_srng_src_peek() may result in processing invalid buffer for the very first interrupt. Since, HW starts writing buffer from TP. To avoid this issue call ath11k_hal_srng_src_next_peek() instead of calling ath11k_hal_srng_src_peek(). Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com> Co-developed-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240429073624.736147-1-quic_tamizhr@quicinc.com
2024-05-03wifi: ath11k: unmap the CE in ath11k_ahb_probe() error pathJeff Johnson
Currently, in ath11k_ahb_probe(), if a failure occurs after ath11k_ahb_ce_remap() is called, and if hw_params->ce_remap is enabled, the CE register memory is not unmapped. So add a call to ath11k_ahb_ce_unmap() in the error path. This issue was identified by smatch/smatch_scripts/kchecker: drivers/net/wireless/ath/ath11k/ahb.c:1218 ath11k_ahb_probe() warn: 'ab->mem_ce' from ioremap() not released on lines: 1218. Since this is a rare error path with no simple way to test, and since the change is trivial to review, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240430-ce-unmap-v1-2-e468328f95d9@quicinc.com
2024-05-03wifi: ath11k: refactor CE remap & unmapJeff Johnson
Currently the logic that handles hw_params->ce_remap is inline code, both for doing the remap and the unmap. An upcoming change needs to do the unmap in a second place, so refactor the unmap logic into a separate function. And although it is only called from one place, refactor the remap logic as well to have functional symmetry. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240430-ce-unmap-v1-1-e468328f95d9@quicinc.com
2024-05-03wifi: ath11k: ath11k_mac_op_ipv6_changed(): use list_for_each_entry()Kalle Valo
Simplify the loop by using list_for_each_entry(). No functional changes. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://msgid.link/20240411165516.4070649-3-kvalo@kernel.org
2024-05-03Merge tag 'ath-next-20240502' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath ath.git patches for v6.10 ath12k * debugfs support * dfs_simulate_radar debugfs file * disable Wireless Extensions * suspend and hibernation support * ACPI support * refactoring in preparation of multi-link support ath11k * support hibernation (required changes in qrtr and MHI subsystems) * ieee80211-freq-limit Device Tree property support ath10k * firmware-name Device Tree property support
2024-05-03wifi: mac80211: handle color change per linkAditya Kumar Singh
In order to support color change with MLO, handle the link ID now passed from cfg80211, adjust the code to do everything per link and call the notifications to cfg80211 correctly. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240422053412.2024075-4-quic_adisi@quicinc.com Link: https://msgid.link/20240422053412.2024075-5-quic_adisi@quicinc.com Link: https://msgid.link/20240422053412.2024075-6-quic_adisi@quicinc.com Link: https://msgid.link/20240422053412.2024075-7-quic_adisi@quicinc.com [squash, move API call updates to this patch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/ti/icssg/icssg_prueth.c net/mac80211/chan.c 89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link") 87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()") https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/ net/unix/garbage.c 1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().") 4090fa373f0e ("af_unix: Replace garbage collection algorithm.") drivers/net/ethernet/ti/icssg/icssg_prueth.c drivers/net/ethernet/ti/icssg/icssg_common.c 4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()") e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24wifi: ath11k: allocate dummy net_device dynamicallyBreno Leitao
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_device from struct ath11k_ext_irq_grp by converting it into a pointer. Then use the leverage alloc_netdev() to allocate the net_device object at ath11k_ahb_config_ext_irq() for ahb, and ath11k_pcic_ext_irq_config() for pcic. The free of the device occurs at ath11k_ahb_free_ext_irq() for the ahb case, and ath11k_pcic_free_ext_irq() for the pcic case. [1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ Signed-off-by: Breno Leitao <leitao@debian.org> Tested-by: Kalle Valo <kvalo@kernel.org> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-18wifi: ath11k: Fix error handling in ath11k_wmi_p2p_noa_event()Christophe JAILLET
if (noa_descriptors > WMI_P2P_MAX_NOA_DESCRIPTORS), there is a mix of return and goto. In such a case, 'td' should be freed to avoid a memory leak. While at it, change ath11k_wmi_p2p_noa_event() to return void. '0' was returned in all cases, even in case of error and the only caller does not handle the return value. This is also more consistent with most of functions called from ath11k_wmi_tlv_op_rx(). Fixes: 2408379f15a1 ("wifi: ath11k: implement handling of P2P NoA event") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/07f1fc75b2d5b4173ae1b7bb1da5be7f6fc608c8.1713212781.git.christophe.jaillet@wanadoo.fr
2024-04-18wifi: ath11k: add support DT ieee80211-freq-limitChristian Lamparter
The common DT property can be used to limit the available channels/frequencies. But ath11k has to manually call wiphy_read_of_freq_limits(). Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/ed266944c721de8dbf0fe35f387a3a71b2c84037.1686486468.git.chunkeey@gmail.com
2024-04-16wifi: ath11k: use RCU when accessing struct inet6_dev::ac_listKalle Valo
Commit c3718936ec47 ("ipv6: anycast: complete RCU handling of struct ifacaddr6") converted struct inet6_dev::ac_list to use RCU but missed that ath11k also accesses this list. Now sparse warns: drivers/net/wireless/ath/ath11k/mac.c:9145:21: warning: incorrect type in assignment (different address spaces) drivers/net/wireless/ath/ath11k/mac.c:9145:21: expected struct ifacaddr6 *ifaca6 drivers/net/wireless/ath/ath11k/mac.c:9145:21: got struct ifacaddr6 [noderef] __rcu *ac_list drivers/net/wireless/ath/ath11k/mac.c:9145:53: warning: incorrect type in assignment (different address spaces) drivers/net/wireless/ath/ath11k/mac.c:9145:53: expected struct ifacaddr6 *ifaca6 drivers/net/wireless/ath/ath11k/mac.c:9145:53: got struct ifacaddr6 [noderef] __rcu *aca_next Fix it by using rtnl_dereference(). Also add a note that read_lock_bh() calls rcu_read_lock() which I was not aware of. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Fixes: c3718936ec47 ("ipv6: anycast: complete RCU handling of struct ifacaddr6") Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240411165516.4070649-2-kvalo@kernel.org
2024-04-09wifi: ath11k: support hibernationBaochen Qiang
Now that all infrastructure is in place and ath11k is fixed to handle all the corner cases, power down the ath11k firmware during suspend and power it back up during resume. This fixes the problem when using hibernation with ath11k PCI devices. For suspend, two conditions needs to be satisfied: 1. since MHI channel unprepare would be done in late suspend stage, ath11k needs to get all QMI-dependent things done before that stage. 2. and because unprepare MHI channels requires a working MHI stack, ath11k is not allowed to call mhi_power_down() until that finishes. So the original suspend callback is separated into two parts: the first part handles all QMI-dependent things in suspend callback; while the second part powers down MHI in suspend_late callback. This is valid because kernel calls ath11k's suspend callback before all suspend_late callbacks, making the first condition happy. And because MHI devices are children of ath11k device (ab->dev), kernel guarantees that ath11k's suspend_late callback is called after QRTR's suspend_late callback, this satisfies the second condition. Above analysis also applies to resume process. so the original resume callback is separated into two parts: the first part powers up MHI stack in resume_early callback, this guarantees MHI stack is working when QRTR tries to prepare MHI channels (kernel calls QRTR's resume_early callback after ath11k's resume_early callback, due to the child-father relationship); the second part waits for the completion of restart, which won't fail now since MHI channels are ready for use by QMI. Another notable change is in power down path, we tell mhi_power_down() to not to destroy MHI devices, making it possible for QRTR to help unprepare/prepare MHI channels, and finally get us rid of the probe-defer issue when resume. Also change related code due to interface changes. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240305021320.3367-4-quic_bqiang@quicinc.com
2024-04-04wifi: ath11k: fix hal_rx_buf_return_buf_manager documentationJeff Johnson
kernel-doc flagged the following issue, so fix it: drivers/net/wireless/ath/ath11k/hal.h:668: warning: missing initial short description on line: * enum hal_rx_buf_return_buf_manager Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240329-hal_rx_buf_return_buf_manager-v1-1-e62ec9dc2af9@quicinc.com
2024-03-25wifi: ath: Convert sprintf/snprintf to sysfs_emitLi Zhijian
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. coccinelle complains that there are still a couple of functions that use snprintf(). Convert them to sysfs_emit(). sprintf() will be converted as weel if they have. Generally, this patch is generated by make coccicheck M=<path/to/file> MODE=patch \ COCCI=scripts/coccinelle/api/device_attr_show.cocci No functional change intended CC: Kalle Valo <kvalo@kernel.org> CC: Jeff Johnson <jjohnson@kernel.org> CC: linux-wireless@vger.kernel.org CC: ath11k@lists.infradead.org CC: ath10k@lists.infradead.org Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240315055211.1347548-1-lizhijian@fujitsu.com
2024-03-21wifi: ath11k: remove duplicate definitions in wmi.hKang Yang
There are some duplicate definitions in wmi.h, remove them. No functional changes, compile tested only. Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240314021654.304451-1-quic_kangyang@quicinc.com
2024-03-21wifi: ath11k: do not process consecutive RDDM eventBaochen Qiang
Currently we do reset for each RDDM event from MHI, however there are cases, see below log, that we get two or more consecutive events, and it is pointless to do reset for the subsequent ones. What's more, it makes reset process more likely to fail. [ 1502.115876] ath11k_pci 0000:04:00.0: boot notify status reason MHI_CB_EE_RDDM [ 1502.115884] ath11k_pci 0000:04:00.0: firmware crashed: MHI_CB_EE_RDDM [ 1502.224041] ath11k_pci 0000:04:00.0: boot notify status reason MHI_CB_EE_RDDM [ 1502.224050] ath11k_pci 0000:04:00.0: firmware crashed: MHI_CB_EE_RDDM Add a check to avoid reset again and again. This is done by tracking previous MHI status: if we receive a new RDDM event while the previous one is also the same, we treat it as duplicate and ignore it, because normally we should receive a MHI_CB_EE_MISSION_MODE event between them. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111071406.14053-1-quic_bqiang@quicinc.com
2024-03-14wifi: ath11k: advertise P2P dev support for QCA6390/WCN6855/QCA2066Kang Yang
Now that all the necessary pieces are implemented we can enable P2P support for QCA6390/WCN6855/QCA2066. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-7-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: change scan flag scan_f_filter_prb_req for QCA6390/WCN6855/QCA2066Kang Yang
Current ROC scan will filter probe request. So P2P device cannot receive probe request. But it is necessary for P2P mode. A P2P device cannot be discovered if it doesn't respond to others' probe request. In addition, station won't filter probe request with common scan. But for station, there is no needed to receive probe request. Based on the above two points, change scan flag scan_f_filter_prb_req for QCA6390/WCN6855/QCA2066. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-6-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: change WLAN_SCAN_PARAMS_MAX_IE_LEN from 256 to 512Kang Yang
Mac80211 needs more space for P2P scan ie in P2P mode, 256 is not enough, resize it to 512. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-5-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: implement handling of P2P NoA eventKang Yang
The NoA(Notice of Absence) attribute is used by the P2P Group Owner to signal its absence due to power save timing, concurrent operation, or off-channel scanning. It is also used in the P2P Presence Request-Response mechanism. The NoA attribute shall be present in the P2P IE in the beacon frames transmitted by a P2P Group Owner when a NoA schedule is being advertised, or when the CTWindow is non-zero. So add support to update P2P information after P2P GO is up through event WMI_P2P_NOA_EVENTID, and always put it in probe resp. Create p2p.c and p2p.h for P2P related functions and definitions. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-4-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: add P2P IE in beacon templateKang Yang
P2P Element is a necessary component of P2P protocol communication. It contains the Vendor Specific Information Element which includes the WFA OUI and an OUI Type indicating P2P. Add P2P IE in beacon template, and implement WMI interface for it. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-3-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: change interface combination for P2P modeKang Yang
Current interface combination doesn't support P2P mode. So change it for P2P mode. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-2-quic_kangyang@quicinc.com
2024-03-12wifi: ath11k: don't force enable power save on non-running vdevsBaochen Qiang
Currently we force enable power save on non-running vdevs, this results in unexpected ping latency in below scenarios: 1. disable power save from userspace. 2. trigger suspend/resume. With step 1 power save is disabled successfully and we get a good latency: PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=5.13 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=5.45 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=5.99 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=6.34 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=4.47 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=6.45 ms While after step 2, the latency becomes much larger: PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=17.7 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=15.0 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=14.3 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=16.5 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=20.1 ms The reason is, with step 2, power save is force enabled due to vdev not running, although mac80211 was trying to disable it to honor userspace configuration: ath11k_pci 0000:03:00.0: wmi cmd sta powersave mode psmode 1 vdev id 0 Call Trace: ath11k_wmi_pdev_set_ps_mode ath11k_mac_op_bss_info_changed ieee80211_bss_info_change_notify ieee80211_reconfig ieee80211_resume wiphy_resume This logic is taken from ath10k where it was added due to below comment: Firmware doesn't behave nicely and consumes more power than necessary if PS is disabled on a non-started vdev. However we don't know whether such an issue also occurs to ath11k firmware or not. But even if it does, it's not appropriate because it goes against userspace, even cfg/mac80211 don't know we have enabled it in fact. Remove it to fix this issue. In this way we not only get a better latency, but also, and the most important, keeps the consistency between userspace and kernel/driver. The biggest price for that would be the power consumption, which is not that important, compared with the consistency. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: b2beffa7d9a6 ("ath11k: enable 802.11 power save mode in station mode") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240309113115.11498-1-quic_bqiang@quicinc.com
2024-03-11wifi: ath11k: adjust a comment to reflect realityKevin Lo
On QCA6390/QCN9074/WCN6855, MHISTATUS may still have SYSERR bit set after SOC_GLOBAL_RESET. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/ZeWEqGVibkMg2APi@ns.kevlo.org
2024-03-08wifi: ath11k: fix soc_dp_stats debugfs file permissionJeff Johnson
Currently the soc_dp_stats debugfs file has the following permissions: # ls -l /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats -rw------- 1 root root 0 Mar 4 15:04 /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats However this file does not actually support write operations -- no .write() method is registered. Therefore use the correct permissions when creating the file. After the change: # ls -l /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats -r-------- 1 root root 0 Mar 4 15:15 /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240305-fix-soc_dp_stats-permission-v1-1-2ec10b42f755@quicinc.com
2024-03-08wifi: ath11k: remove obsolete struct wmi_start_scan_argJeff Johnson
ath11k inherited struct wmi_start_scan_arg from ath10k. However, in ath11k, this struct is unused -- struct scan_req_params is used for this functionality. So remove the unused struct. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240226-ath11k-obsolete-wmi_start_scan_arg-v1-1-c0b94c6e191d@quicinc.com
2024-02-28wifi: ath11k: constify MHI channel and controller configsJeff Johnson
Unlike the event configuration which can be modified by MHI, the channel and controller configurations are expected to be const. And since they are not modified locally, constify them to prevent runtime modification. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240223-mhi-const-wifi-ath11k-v1-1-51b9d42d2639@quicinc.com
2024-02-28wifi: ath11k: decrease MHI channel buffer length to 8KBBaochen Qiang
Currently buf_len field of ath11k_mhi_config_qca6390 is assigned with 0, making MHI use a default size, 64KB, to allocate channel buffers. This is likely to fail in some scenarios where system memory is highly fragmented and memory compaction or reclaim is not allowed. There is a fail report which is caused by it: kworker/u32:45: page allocation failure: order:4, mode:0x40c00(GFP_NOIO|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 0 PID: 19318 Comm: kworker/u32:45 Not tainted 6.8.0-rc3-1.gae4495f-default #1 openSUSE Tumbleweed (unreleased) 493b6d5b382c603654d7a81fc3c144d59a1dfceb Workqueue: events_unbound async_run_entry_fn Call Trace: <TASK> dump_stack_lvl+0x47/0x60 warn_alloc+0x13a/0x1b0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __alloc_pages_direct_compact+0xab/0x210 __alloc_pages_slowpath.constprop.0+0xd3e/0xda0 __alloc_pages+0x32d/0x350 ? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] __kmalloc_large_node+0x72/0x110 __kmalloc+0x37c/0x480 ? mhi_map_single_no_bb+0x77/0xf0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] ? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] __mhi_prepare_for_transfer+0x44/0x80 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] ? __pfx_____mhi_prepare_for_transfer+0x10/0x10 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] device_for_each_child+0x5c/0xa0 ? __pfx_pci_pm_resume+0x10/0x10 ath11k_core_resume+0x65/0x100 [ath11k a5094e22d7223135c40d93c8f5321cf09fd85e4e] ? srso_alias_return_thunk+0x5/0xfbef5 ath11k_pci_pm_resume+0x32/0x60 [ath11k_pci 830b7bfc3ea80ebef32e563cafe2cb55e9cc73ec] ? srso_alias_return_thunk+0x5/0xfbef5 dpm_run_callback+0x8c/0x1e0 device_resume+0x104/0x340 ? __pfx_dpm_watchdog_handler+0x10/0x10 async_resume+0x1d/0x30 async_run_entry_fn+0x32/0x120 process_one_work+0x168/0x330 worker_thread+0x2f5/0x410 ? __pfx_worker_thread+0x10/0x10 kthread+0xe8/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Actually those buffers are used only by QMI target -> host communication. And for WCN6855 and QCA6390, the largest packet size for that is less than 6KB. So change buf_len field to 8KB, which results in order 1 allocation if page size is 4KB. In this way, we can at least save some memory, and as well as decrease the possibility of allocation failure in those scenarios. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Reported-by: Vlastimil Babka <vbabka@suse.cz> Closes: https://lore.kernel.org/ath11k/96481a45-3547-4d23-ad34-3a8f1d90c1cd@suse.cz/ Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240223053111.29170-1-quic_bqiang@quicinc.com
2024-02-23wifi: ath11k: thermal: don't try to register multiple timesKalle Valo
Every time the firmware boots we call ath11k_core_qmi_firmware_ready() which ends up calling ath11k_thermal_register(). So we try to register thermal devices multiple times. And when we power off the firmware during suspend/hibernation (implemented in the next patch) we get a warning in resume: hwmon hwmon4: PM: parent phy0 should not be sleeping Workaround this similarly like ath11k_mac_register() does by testing ATH11K_FLAG_REGISTERED. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://msgid.link/20240221024725.10057-6-quic_bqiang@quicinc.com
2024-02-23wifi: ath11k: fix warning on DMA ring capabilities eventBaochen Qiang
We are seeing below warning in both reset and suspend/resume scenarios: [69663.691847] ath11k_pci 0000:02:00.0: Already processed, so ignoring dma ring caps This is because ab->num_db_cap is not cleared in ath11k_wmi_free_dbring_caps(), so clear it to avoid such warnings. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://msgid.link/20240221024725.10057-5-quic_bqiang@quicinc.com
2024-02-23wifi: ath11k: do not dump SRNG statistics during resumeBaochen Qiang
Both the firmware reset feature and the power management suspend/resume feature share common power-down and power-up functionality. One aspect of the power-up functionality is the handling of the ATH11K_QMI_EVENT_FW_INIT_DONE event. When this event is received, a call is made to ath11k_hal_dump_srng_stats(), with the purpose to collect information that may be useful in debugging the cause of a firmware reset. Unfortunately, since this functionality is shared between both the firmware reset path and the power management resume path, the kernel log is flooded with messages during resume. Since these messages are not useful during resume, and in fact can be confusing and can increase the time it takes to resume, update the logic to only call ath11k_hal_dump_srng_stats() during firmware reset. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://msgid.link/20240221024725.10057-4-quic_bqiang@quicinc.com
2024-02-23wifi: ath11k: remove MHI LOOPBACK channelsBaochen Qiang
There is no driver to match these two channels, so remove them. This fixes warnings from MHI subsystem during suspend: mhi mhi0_LOOPBACK: 1: Failed to reset channel, still resetting mhi mhi0_LOOPBACK: 0: Failed to reset channel, still resetting Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://msgid.link/20240221024725.10057-3-quic_bqiang@quicinc.com
2024-02-23wifi: ath11k: rearrange IRQ enable/disable in reset pathBaochen Qiang
For non WoW suspend/resume, ath11k host powers down whole hardware when suspend and powers up it when resume, the code path it goes through is very like the ath11k reset logic. In order to reuse that logic, rearrange IRQ handling in the reset path. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://msgid.link/20240221024725.10057-2-quic_bqiang@quicinc.com
2024-02-22Merge tag 'ath-next-20240222' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath ath.git patches for v6.9 We have support for QCA2066 now and also several new features in ath12k. Major changes: ath12k * firmware-2.bin support * support having multiple identical PCI devices (firmware needs to have ATH12K_FW_FEATURE_MULTI_QRTR_ID) * QCN9274: support split-PHY devices * WCN7850: enable Power Save Mode in station mode * WCN7850: P2P support ath11k: * QCA6390 & WCN6855: support 2 concurrent station interfaces * QCA2066 support
2024-02-21wifi: mac80211: check beacon countdown is complete on per link basisAditya Kumar Singh
Currently, function to check if beacon countdown is complete uses deflink to fetch the beacon and check the counter. However, with MLO, there is a need to check the counter for the beacon in a particular link. Add support to use link_id in order to fetch the beacon from a particular link data. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240216144621.514385-2-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-15wifi: ath11k: remove unused scan_events from struct scan_req_paramsNicolas Escande
As discussed lets remove the unused scan_events field from struct scan_req_params. Also, as it is not needed anymore, remove the underlying union wrapping too. No functionnal changes. Link: https://lore.kernel.org/all/4be7d62e-cb59-462d-aac2-94e27efc22ff@quicinc.com/ Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240211151036.1950292-1-nico.escande@gmail.com
2024-02-15wifi: ath11k: add support for QCA2066Baochen Qiang
QCA2066 is a PCI based DBS device. It is very similar to WCN6855 overall: they share the same PCI device ID, the same major and minor version numbers, the same register address, and same HAL descriptors etc. The most significant difference is that QCA2066 supports 3-antenna configuration while WCN6855 does not. To differentiate them, subversion numbers are used. Currently four numbers are used by QCA2066: 0x1019A0E1, 0x1019B0E1, 0x1019C0E1 and 0x1019D0E1. Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03737-QCAHSPSWPL_V2_SILICONZ_CE-1 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240109021336.4143-3-quic_bqiang@quicinc.com
2024-02-15wifi: ath11k: move pci.ops registration aheadBaochen Qiang
In ath11k_pci_probe() there is a switch statement that, based upon the PCI device ID, assigns pci_ops. After the switch, ath11k_pcic_register_pci_ops() is called to register the pci_ops. Unfortunately, this registration is too late if any of the cases in the switch need to perform operations that require the pci_ops to already be registered. In particular, an upcoming patch for QCA2066 needs to call ath11k_pcic_read32(). To address this issue, call ath11k_pcic_register_pci_ops() from each case instead of doing so after the switch. That way the ops will be registered if any subsequent operations within the case processing require the ops to be present. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240109021336.4143-2-quic_bqiang@quicinc.com
2024-02-15wifi: ath11k: provide address list if chip supports 2 stationsCarl Huang
Provide address list to mac80211 so user doesn't need to specify addresses when a second interface is added because the address can be allocated from the list by mac80211. The derived addresses have LAA (Local Administered Address) bit set, and only the first byte is changed. Take the 00:03:7f:xx:xx:xx as example to derive: addresses[0] is unchanged, it's still 00:03:7f:xx:xx:xx, addresses[1] is 02:03:7f:xx:xx:xx, addresses[2] is 12:03:7f:xx:xx:xx, addresses[3] is 22:03:7f:xx:xx:xx, addresses[4] is 32:03:7f:xx:xx:xx. However as only 3 addresses are reported now, so addresses[3] and addresses[4] aren't actually derived. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20230714023801.2621802-3-quic_cjhuang@quicinc.com
generated by cgit (git 2.34.1) at 2025-07-16 07:29:25 +0000